aio: strengthen memory barriers for bottom half scheduling

There are two problems with memory barriers in async.c.  The fix is
to use atomic_xchg in order to achieve sequential consistency between
the scheduling of a bottom half and the corresponding execution.

First, if bh->scheduled is already 1 in qemu_bh_schedule, QEMU does
not execute a memory barrier to order any writes needed by the callback
before the read of bh->scheduled.  If the other side sees req->state as
THREAD_ACTIVE, the callback is not invoked and you get deadlock.

Second, the memory barrier in aio_bh_poll is too weak.  Without this
patch, it is possible that bh->scheduled = 0 is not "published" until
after the callback has returned.  Another thread wants to schedule the
bottom half, but it sees bh->scheduled = 1 and does nothing.  This causes
a lost wakeup.  The memory barrier should have been changed to smp_mb()
in commit 924fe12 (aio: fix qemu_bh_schedule() bh->ctx race condition,
2014-06-03) together with qemu_bh_schedule()'s.  Guess who reviewed
that patch?

Both of these involve a store and a load, so they are reproducible on
x86_64 as well.  It is however much easier on aarch64, where the
libguestfs test suite triggers the bug fairly easily.  Even there the
failure can go away or appear depending on compiler optimization level,
tracing options, or even kernel debugging options.

Paul Leveille however reported how to trigger the problem within 15
minutes on x86_64 as well.  His (untested) recipe, reproduced here
for reference, is the following:

   1) Qcow2 (or 3) is critical – raw files alone seem to avoid the problem.

   2) Use “cache=directsync” rather than the default of
   “cache=none” to make it happen easier.

   3) Use a server with a write-back RAID controller to allow for rapid
   IO rates.

   4) Run a random-access load that (mostly) writes chunks to various
   files on the virtual block device.

      a. I use ‘diskload.exe c:25’, a Microsoft HCT load
         generator, on Windows VMs.

      b. Iometer can probably be configured to generate a similar load.

   5) Run multiple VMs in parallel, against the same storage device,
   to shake the failure out sooner.

   6) IvyBridge and Haswell processors for certain; not sure about others.

A similar patch survived over 12 hours of testing, where an unpatched
QEMU would fail within 15 minutes.

This bug is, most likely, also the cause of failures in the libguestfs
testsuite on AArch64.

Thanks to Laszlo Ersek for initially reporting this bug, to Stefan
Hajnoczi for suggesting closer examination of qemu_bh_schedule, and to
Paul for providing test input and a prototype patch.

Reported-by: Laszlo Ersek <lersek@redhat.com>
Reported-by: Paul Leveille <Paul.Leveille@stratus.com>
Reported-by: John Snow <jsnow@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1428419779-26062-1-git-send-email-pbonzini@redhat.com
Suggested-by: Paul Leveille <Paul.Leveille@stratus.com>
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This commit is contained in:
Paolo Bonzini 2015-04-07 17:16:19 +02:00 committed by Stefan Hajnoczi
parent 2a6cdd6d35
commit e8d3b1a25f

24
async.c
View File

@ -72,12 +72,13 @@ int aio_bh_poll(AioContext *ctx)
/* Make sure that fetching bh happens before accessing its members */
smp_read_barrier_depends();
next = bh->next;
if (!bh->deleted && bh->scheduled) {
bh->scheduled = 0;
/* Paired with write barrier in bh schedule to ensure reading for
* idle & callbacks coming after bh's scheduling.
/* The atomic_xchg is paired with the one in qemu_bh_schedule. The
* implicit memory barrier ensures that the callback sees all writes
* done by the scheduling thread. It also ensures that the scheduling
* thread sees the zero before bh->cb has run, and thus will call
* aio_notify again if necessary.
*/
smp_rmb();
if (!bh->deleted && atomic_xchg(&bh->scheduled, 0)) {
if (!bh->idle)
ret = 1;
bh->idle = 0;
@ -108,34 +109,29 @@ int aio_bh_poll(AioContext *ctx)
void qemu_bh_schedule_idle(QEMUBH *bh)
{
if (bh->scheduled)
return;
bh->idle = 1;
/* Make sure that idle & any writes needed by the callback are done
* before the locations are read in the aio_bh_poll.
*/
smp_wmb();
bh->scheduled = 1;
atomic_mb_set(&bh->scheduled, 1);
}
void qemu_bh_schedule(QEMUBH *bh)
{
AioContext *ctx;
if (bh->scheduled)
return;
ctx = bh->ctx;
bh->idle = 0;
/* Make sure that:
/* The memory barrier implicit in atomic_xchg makes sure that:
* 1. idle & any writes needed by the callback are done before the
* locations are read in the aio_bh_poll.
* 2. ctx is loaded before scheduled is set and the callback has a chance
* to execute.
*/
smp_mb();
bh->scheduled = 1;
if (atomic_xchg(&bh->scheduled, 1) == 0) {
aio_notify(ctx);
}
}
/* This func is async.