Stand-alone TMU emulation code, by Magnus Damm.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3269 c046a42c-6fe2-441c-8c8c-71466251a162
This commit is contained in:
ths
parent
0d78f544de
commit
cd1a3f6840
@ -476,6 +476,7 @@ CPPFLAGS += -DHAS_AUDIO
|
||||
endif
|
||||
ifeq ($(TARGET_BASE_ARCH), sh4)
|
||||
VL_OBJS+= shix.o r2d.o sh7750.o sh7750_regnames.o tc58128.o
|
||||
VL_OBJS+= sh_timer.o ptimer.o
|
||||
endif
|
||||
ifeq ($(TARGET_BASE_ARCH), m68k)
|
||||
VL_OBJS+= an5206.o mcf5206.o ptimer.o mcf_uart.o mcf_intc.o mcf5208.o mcf_fec.o
|
||||
|
||||
102
hw/sh7750.c
102
hw/sh7750.c
@ -64,13 +64,6 @@ typedef struct SH7750State {
|
||||
uint8_t scbrr2;
|
||||
fifo serial2_receive_fifo;
|
||||
fifo serial2_transmit_fifo;
|
||||
/* Timers */
|
||||
uint8_t tstr;
|
||||
/* Timer 0 */
|
||||
QEMUTimer *timer0;
|
||||
uint16_t tcr0;
|
||||
uint32_t tcor0;
|
||||
uint32_t tcnt0;
|
||||
/* IO ports */
|
||||
uint16_t gpioic;
|
||||
uint32_t pctra;
|
||||
@ -88,84 +81,9 @@ typedef struct SH7750State {
|
||||
sh7750_io_device *devices[NB_DEVICES]; /* External peripherals */
|
||||
/* Cache */
|
||||
uint32_t ccr;
|
||||
|
||||
} SH7750State;
|
||||
|
||||
/**********************************************************************
|
||||
Timers
|
||||
**********************************************************************/
|
||||
|
||||
/* XXXXX At this time, timer0 works in underflow only mode, that is
|
||||
the value of tcnt0 is read at alarm computation time and cannot
|
||||
be read back by the guest OS */
|
||||
|
||||
static void start_timer0(SH7750State * s)
|
||||
{
|
||||
uint64_t now, next, prescaler;
|
||||
|
||||
if ((s->tcr0 & 6) == 6) {
|
||||
fprintf(stderr, "rtc clock for timer 0 not supported\n");
|
||||
assert(0);
|
||||
}
|
||||
|
||||
if ((s->tcr0 & 7) == 5) {
|
||||
fprintf(stderr, "timer 0 configuration not supported\n");
|
||||
assert(0);
|
||||
}
|
||||
|
||||
if ((s->tcr0 & 4) == 4)
|
||||
prescaler = 1024;
|
||||
else
|
||||
prescaler = 4 << (s->tcr0 & 3);
|
||||
|
||||
now = qemu_get_clock(vm_clock);
|
||||
/* XXXXX */
|
||||
next =
|
||||
now + muldiv64(prescaler * s->tcnt0, ticks_per_sec,
|
||||
s->periph_freq);
|
||||
if (next == now)
|
||||
next = now + 1;
|
||||
fprintf(stderr, "now=%016" PRIx64 ", next=%016" PRIx64 "\n", now, next);
|
||||
fprintf(stderr, "timer will underflow in %f seconds\n",
|
||||
(float) (next - now) / (float) ticks_per_sec);
|
||||
|
||||
qemu_mod_timer(s->timer0, next);
|
||||
}
|
||||
|
||||
static void timer_start_changed(SH7750State * s)
|
||||
{
|
||||
if (s->tstr & SH7750_TSTR_STR0) {
|
||||
start_timer0(s);
|
||||
} else {
|
||||
fprintf(stderr, "timer 0 is stopped\n");
|
||||
qemu_del_timer(s->timer0);
|
||||
}
|
||||
}
|
||||
|
||||
static void timer0_cb(void *opaque)
|
||||
{
|
||||
SH7750State *s = opaque;
|
||||
|
||||
s->tcnt0 = (uint32_t) 0; /* XXXXX */
|
||||
if (--s->tcnt0 == (uint32_t) - 1) {
|
||||
fprintf(stderr, "timer 0 underflow\n");
|
||||
s->tcnt0 = s->tcor0;
|
||||
s->tcr0 |= SH7750_TCR_UNF;
|
||||
if (s->tcr0 & SH7750_TCR_UNIE) {
|
||||
fprintf(stderr,
|
||||
"interrupt generation for timer 0 not supported\n");
|
||||
assert(0);
|
||||
}
|
||||
}
|
||||
start_timer0(s);
|
||||
}
|
||||
|
||||
static void init_timers(SH7750State * s)
|
||||
{
|
||||
s->tcor0 = 0xffffffff;
|
||||
s->tcnt0 = 0xffffffff;
|
||||
s->timer0 = qemu_new_timer(vm_clock, &timer0_cb, s);
|
||||
}
|
||||
|
||||
/**********************************************************************
|
||||
First serial port
|
||||
**********************************************************************/
|
||||
@ -581,8 +499,6 @@ static uint32_t sh7750_mem_readw(void *opaque, target_phys_addr_t addr)
|
||||
fprintf(stderr,
|
||||
"Read access to refresh count register, incrementing\n");
|
||||
return s->rfcr++;
|
||||
case SH7750_TCR0_A7:
|
||||
return s->tcr0;
|
||||
case SH7750_SCLSR2_A7:
|
||||
/* Read and clear overflow bit */
|
||||
r = s->sclsr2;
|
||||
@ -649,10 +565,6 @@ static void sh7750_mem_writeb(void *opaque, target_phys_addr_t addr,
|
||||
case SH7750_SCBRR2_A7:
|
||||
s->scbrr2 = mem_value;
|
||||
return;
|
||||
case SH7750_TSTR_A7:
|
||||
s->tstr = mem_value;
|
||||
timer_start_changed(s);
|
||||
return;
|
||||
case SH7750_SCSCR1_A7:
|
||||
s->scscr1 = mem_value;
|
||||
scscr1_changed(s);
|
||||
@ -721,9 +633,6 @@ static void sh7750_mem_writew(void *opaque, target_phys_addr_t addr,
|
||||
case SH7750_SCSMR2_A7:
|
||||
s->scsmr2 = mem_value;
|
||||
return;
|
||||
case SH7750_TCR0_A7:
|
||||
s->tcr0 = mem_value;
|
||||
return;
|
||||
case SH7750_GPIOIC_A7:
|
||||
s->gpioic = mem_value;
|
||||
if (mem_value != 0) {
|
||||
@ -768,9 +677,6 @@ static void sh7750_mem_writel(void *opaque, target_phys_addr_t addr,
|
||||
s->portpullupb = portpullup(mem_value);
|
||||
portb_changed(s, temp);
|
||||
return;
|
||||
case SH7750_TCNT0_A7:
|
||||
s->tcnt0 = mem_value & 0xf;
|
||||
return;
|
||||
case SH7750_MMUCR_A7:
|
||||
s->cpu->mmucr = mem_value;
|
||||
return;
|
||||
@ -828,7 +734,11 @@ SH7750State *sh7750_init(CPUSH4State * cpu)
|
||||
sh7750_mem_read,
|
||||
sh7750_mem_write, s);
|
||||
cpu_register_physical_memory(0x1c000000, 0x04000000, sh7750_io_memory);
|
||||
init_timers(s);
|
||||
init_serial_ports(s);
|
||||
|
||||
tmu012_init(0x1fd80000,
|
||||
TMU012_FEAT_TOCR | TMU012_FEAT_3CHAN | TMU012_FEAT_EXTCLK,
|
||||
s->periph_freq);
|
||||
tmu012_init(0x1e100000, 0, s->periph_freq);
|
||||
return s;
|
||||
}
|
||||
|
||||
@ -42,18 +42,6 @@ static regname_t regnames[] = {
|
||||
REGNAME(SH7750_RMONAR_A7)
|
||||
REGNAME(SH7750_RCR1_A7)
|
||||
REGNAME(SH7750_RCR2_A7)
|
||||
REGNAME(SH7750_TOCR_A7)
|
||||
REGNAME(SH7750_TSTR_A7)
|
||||
REGNAME(SH7750_TCOR0_A7)
|
||||
REGNAME(SH7750_TCOR1_A7)
|
||||
REGNAME(SH7750_TCOR2_A7)
|
||||
REGNAME(SH7750_TCNT0_A7)
|
||||
REGNAME(SH7750_TCNT1_A7)
|
||||
REGNAME(SH7750_TCNT2_A7)
|
||||
REGNAME(SH7750_TCR0_A7)
|
||||
REGNAME(SH7750_TCR1_A7)
|
||||
REGNAME(SH7750_TCR2_A7)
|
||||
REGNAME(SH7750_TCPR2_A7)
|
||||
REGNAME(SH7750_BCR1_A7)
|
||||
REGNAME(SH7750_BCR2_A7)
|
||||
REGNAME(SH7750_WCR1_A7)
|
||||
|
||||
@ -524,94 +524,6 @@
|
||||
year counters are stopped
|
||||
1 - sec, min, hr, day-of-week, month,
|
||||
year counters operate normally */
|
||||
|
||||
|
||||
/*
|
||||
* Timer Unit (TMU)
|
||||
*/
|
||||
/* Timer Output Control Register (byte) - TOCR */
|
||||
#define SH7750_TOCR_REGOFS 0xD80000 /* offset */
|
||||
#define SH7750_TOCR SH7750_P4_REG32(SH7750_TOCR_REGOFS)
|
||||
#define SH7750_TOCR_A7 SH7750_A7_REG32(SH7750_TOCR_REGOFS)
|
||||
#define SH7750_TOCR_TCOE 0x01 /* Timer Clock Pin Control:
|
||||
0 - TCLK is used as external clock
|
||||
input or input capture control
|
||||
1 - TCLK is used as on-chip RTC
|
||||
output clock pin */
|
||||
|
||||
/* Timer Start Register (byte) - TSTR */
|
||||
#define SH7750_TSTR_REGOFS 0xD80004 /* offset */
|
||||
#define SH7750_TSTR SH7750_P4_REG32(SH7750_TSTR_REGOFS)
|
||||
#define SH7750_TSTR_A7 SH7750_A7_REG32(SH7750_TSTR_REGOFS)
|
||||
#define SH7750_TSTR_STR2 0x04 /* TCNT2 performs count operations */
|
||||
#define SH7750_TSTR_STR1 0x02 /* TCNT1 performs count operations */
|
||||
#define SH7750_TSTR_STR0 0x01 /* TCNT0 performs count operations */
|
||||
#define SH7750_TSTR_STR(n) (1 << (n))
|
||||
|
||||
/* Timer Constant Register - TCOR0, TCOR1, TCOR2 */
|
||||
#define SH7750_TCOR_REGOFS(n) (0xD80008 + ((n)*12)) /* offset */
|
||||
#define SH7750_TCOR(n) SH7750_P4_REG32(SH7750_TCOR_REGOFS(n))
|
||||
#define SH7750_TCOR_A7(n) SH7750_A7_REG32(SH7750_TCOR_REGOFS(n))
|
||||
#define SH7750_TCOR0 SH7750_TCOR(0)
|
||||
#define SH7750_TCOR1 SH7750_TCOR(1)
|
||||
#define SH7750_TCOR2 SH7750_TCOR(2)
|
||||
#define SH7750_TCOR0_A7 SH7750_TCOR_A7(0)
|
||||
#define SH7750_TCOR1_A7 SH7750_TCOR_A7(1)
|
||||
#define SH7750_TCOR2_A7 SH7750_TCOR_A7(2)
|
||||
|
||||
/* Timer Counter Register - TCNT0, TCNT1, TCNT2 */
|
||||
#define SH7750_TCNT_REGOFS(n) (0xD8000C + ((n)*12)) /* offset */
|
||||
#define SH7750_TCNT(n) SH7750_P4_REG32(SH7750_TCNT_REGOFS(n))
|
||||
#define SH7750_TCNT_A7(n) SH7750_A7_REG32(SH7750_TCNT_REGOFS(n))
|
||||
#define SH7750_TCNT0 SH7750_TCNT(0)
|
||||
#define SH7750_TCNT1 SH7750_TCNT(1)
|
||||
#define SH7750_TCNT2 SH7750_TCNT(2)
|
||||
#define SH7750_TCNT0_A7 SH7750_TCNT_A7(0)
|
||||
#define SH7750_TCNT1_A7 SH7750_TCNT_A7(1)
|
||||
#define SH7750_TCNT2_A7 SH7750_TCNT_A7(2)
|
||||
|
||||
/* Timer Control Register (half) - TCR0, TCR1, TCR2 */
|
||||
#define SH7750_TCR_REGOFS(n) (0xD80010 + ((n)*12)) /* offset */
|
||||
#define SH7750_TCR(n) SH7750_P4_REG32(SH7750_TCR_REGOFS(n))
|
||||
#define SH7750_TCR_A7(n) SH7750_A7_REG32(SH7750_TCR_REGOFS(n))
|
||||
#define SH7750_TCR0 SH7750_TCR(0)
|
||||
#define SH7750_TCR1 SH7750_TCR(1)
|
||||
#define SH7750_TCR2 SH7750_TCR(2)
|
||||
#define SH7750_TCR0_A7 SH7750_TCR_A7(0)
|
||||
#define SH7750_TCR1_A7 SH7750_TCR_A7(1)
|
||||
#define SH7750_TCR2_A7 SH7750_TCR_A7(2)
|
||||
|
||||
#define SH7750_TCR2_ICPF 0x200 /* Input Capture Interrupt Flag
|
||||
(1 - input capture has occured) */
|
||||
#define SH7750_TCR_UNF 0x100 /* Underflow flag */
|
||||
#define SH7750_TCR2_ICPE 0x0C0 /* Input Capture Control: */
|
||||
#define SH7750_TCR2_ICPE_DIS 0x000 /* Input Capture function is not used */
|
||||
#define SH7750_TCR2_ICPE_NOINT 0x080 /* Input Capture function is used, but
|
||||
input capture interrupt is not
|
||||
enabled */
|
||||
#define SH7750_TCR2_ICPE_INT 0x0C0 /* Input Capture function is used,
|
||||
input capture interrupt enabled */
|
||||
#define SH7750_TCR_UNIE 0x020 /* Underflow Interrupt Control
|
||||
(1 - underflow interrupt enabled) */
|
||||
#define SH7750_TCR_CKEG 0x018 /* Clock Edge selection: */
|
||||
#define SH7750_TCR_CKEG_RAISE 0x000 /* Count/capture on rising edge */
|
||||
#define SH7750_TCR_CKEG_FALL 0x008 /* Count/capture on falling edge */
|
||||
#define SH7750_TCR_CKEG_BOTH 0x018 /* Count/capture on both rising and
|
||||
falling edges */
|
||||
#define SH7750_TCR_TPSC 0x007 /* Timer prescaler */
|
||||
#define SH7750_TCR_TPSC_DIV4 0x000 /* Counts on peripheral clock/4 */
|
||||
#define SH7750_TCR_TPSC_DIV16 0x001 /* Counts on peripheral clock/16 */
|
||||
#define SH7750_TCR_TPSC_DIV64 0x002 /* Counts on peripheral clock/64 */
|
||||
#define SH7750_TCR_TPSC_DIV256 0x003 /* Counts on peripheral clock/256 */
|
||||
#define SH7750_TCR_TPSC_DIV1024 0x004 /* Counts on peripheral clock/1024 */
|
||||
#define SH7750_TCR_TPSC_RTC 0x006 /* Counts on on-chip RTC output clk */
|
||||
#define SH7750_TCR_TPSC_EXT 0x007 /* Counts on external clock */
|
||||
|
||||
/* Input Capture Register (read-only) - TCPR2 */
|
||||
#define SH7750_TCPR2_REGOFS 0xD8002C /* offset */
|
||||
#define SH7750_TCPR2 SH7750_P4_REG32(SH7750_TCPR2_REGOFS)
|
||||
#define SH7750_TCPR2_A7 SH7750_A7_REG32(SH7750_TCPR2_REGOFS)
|
||||
|
||||
/*
|
||||
* Bus State Controller - BSC
|
||||
*/
|
||||
|
||||
323
hw/sh_timer.c
Normal file
323
hw/sh_timer.c
Normal file
@ -0,0 +1,323 @@
|
||||
/*
|
||||
* SuperH Timer modules.
|
||||
*
|
||||
* Copyright (c) 2007 Magnus Damm
|
||||
* Based on arm_timer.c by Paul Brook
|
||||
* Copyright (c) 2005-2006 CodeSourcery.
|
||||
*
|
||||
* This code is licenced under the GPL.
|
||||
*/
|
||||
|
||||
#include "vl.h"
|
||||
|
||||
//#define DEBUG_TIMER
|
||||
|
||||
#define TIMER_TCR_TPSC (7 << 0)
|
||||
#define TIMER_TCR_CKEG (3 << 3)
|
||||
#define TIMER_TCR_UNIE (1 << 5)
|
||||
#define TIMER_TCR_ICPE (3 << 6)
|
||||
#define TIMER_TCR_UNF (1 << 8)
|
||||
#define TIMER_TCR_ICPF (1 << 9)
|
||||
#define TIMER_TCR_RESERVED (0x3f << 10)
|
||||
|
||||
#define TIMER_FEAT_CAPT (1 << 0)
|
||||
#define TIMER_FEAT_EXTCLK (1 << 1)
|
||||
|
||||
typedef struct {
|
||||
ptimer_state *timer;
|
||||
uint32_t tcnt;
|
||||
uint32_t tcor;
|
||||
uint32_t tcr;
|
||||
uint32_t tcpr;
|
||||
int freq;
|
||||
int int_level;
|
||||
int feat;
|
||||
int enabled;
|
||||
qemu_irq irq;
|
||||
} sh_timer_state;
|
||||
|
||||
/* Check all active timers, and schedule the next timer interrupt. */
|
||||
|
||||
static void sh_timer_update(sh_timer_state *s)
|
||||
{
|
||||
#if 0 /* not yet */
|
||||
/* Update interrupts. */
|
||||
if (s->int_level && (s->tcr & TIMER_TCR_UNIE)) {
|
||||
qemu_irq_raise(s->irq);
|
||||
} else {
|
||||
qemu_irq_lower(s->irq);
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
uint32_t sh_timer_read(void *opaque, target_phys_addr_t offset)
|
||||
{
|
||||
sh_timer_state *s = (sh_timer_state *)opaque;
|
||||
|
||||
switch (offset >> 2) {
|
||||
case 0:
|
||||
return s->tcor;
|
||||
case 1:
|
||||
return ptimer_get_count(s->timer);
|
||||
case 2:
|
||||
return s->tcr | (s->int_level ? TIMER_TCR_UNF : 0);
|
||||
case 3:
|
||||
if (s->feat & TIMER_FEAT_CAPT)
|
||||
return s->tcpr;
|
||||
default:
|
||||
cpu_abort (cpu_single_env, "sh_timer_read: Bad offset %x\n",
|
||||
(int)offset);
|
||||
return 0;
|
||||
}
|
||||
}
|
||||
|
||||
static void sh_timer_write(void *opaque, target_phys_addr_t offset,
|
||||
uint32_t value)
|
||||
{
|
||||
sh_timer_state *s = (sh_timer_state *)opaque;
|
||||
int freq;
|
||||
|
||||
switch (offset >> 2) {
|
||||
case 0:
|
||||
s->tcor = value;
|
||||
ptimer_set_limit(s->timer, s->tcor, 0);
|
||||
break;
|
||||
case 1:
|
||||
s->tcnt = value;
|
||||
ptimer_set_count(s->timer, s->tcnt);
|
||||
break;
|
||||
case 2:
|
||||
if (s->enabled) {
|
||||
/* Pause the timer if it is running. This may cause some
|
||||
inaccuracy dure to rounding, but avoids a whole lot of other
|
||||
messyness. */
|
||||
ptimer_stop(s->timer);
|
||||
}
|
||||
freq = s->freq;
|
||||
/* ??? Need to recalculate expiry time after changing divisor. */
|
||||
switch (value & TIMER_TCR_TPSC) {
|
||||
case 0: freq >>= 2; break;
|
||||
case 1: freq >>= 4; break;
|
||||
case 2: freq >>= 6; break;
|
||||
case 3: freq >>= 8; break;
|
||||
case 4: freq >>= 10; break;
|
||||
case 6:
|
||||
case 7: if (s->feat & TIMER_FEAT_EXTCLK) break;
|
||||
default: cpu_abort (cpu_single_env,
|
||||
"sh_timer_write: Reserved TPSC value\n"); break;
|
||||
}
|
||||
switch ((value & TIMER_TCR_CKEG) >> 3) {
|
||||
case 0: break;
|
||||
case 1:
|
||||
case 2:
|
||||
case 3: if (s->feat & TIMER_FEAT_EXTCLK) break;
|
||||
default: cpu_abort (cpu_single_env,
|
||||
"sh_timer_write: Reserved CKEG value\n"); break;
|
||||
}
|
||||
switch ((value & TIMER_TCR_ICPE) >> 6) {
|
||||
case 0: break;
|
||||
case 2:
|
||||
case 3: if (s->feat & TIMER_FEAT_CAPT) break;
|
||||
default: cpu_abort (cpu_single_env,
|
||||
"sh_timer_write: Reserved ICPE value\n"); break;
|
||||
}
|
||||
if ((value & TIMER_TCR_UNF) == 0)
|
||||
s->int_level = 0;
|
||||
|
||||
value &= ~TIMER_TCR_UNF;
|
||||
|
||||
if ((value & TIMER_TCR_ICPF) && (!(s->feat & TIMER_FEAT_CAPT)))
|
||||
cpu_abort (cpu_single_env,
|
||||
"sh_timer_write: Reserved ICPF value\n");
|
||||
|
||||
value &= ~TIMER_TCR_ICPF; /* capture not supported */
|
||||
|
||||
if (value & TIMER_TCR_RESERVED)
|
||||
cpu_abort (cpu_single_env,
|
||||
"sh_timer_write: Reserved TCR bits set\n");
|
||||
s->tcr = value;
|
||||
ptimer_set_limit(s->timer, s->tcor, 0);
|
||||
ptimer_set_freq(s->timer, freq);
|
||||
if (s->enabled) {
|
||||
/* Restart the timer if still enabled. */
|
||||
ptimer_run(s->timer, 0);
|
||||
}
|
||||
break;
|
||||
case 3:
|
||||
if (s->feat & TIMER_FEAT_CAPT) {
|
||||
s->tcpr = value;
|
||||
break;
|
||||
}
|
||||
default:
|
||||
cpu_abort (cpu_single_env, "sh_timer_write: Bad offset %x\n",
|
||||
(int)offset);
|
||||
}
|
||||
sh_timer_update(s);
|
||||
}
|
||||
|
||||
static void sh_timer_start_stop(void *opaque, int enable)
|
||||
{
|
||||
sh_timer_state *s = (sh_timer_state *)opaque;
|
||||
|
||||
#ifdef DEBUG_TIMER
|
||||
printf("sh_timer_start_stop %d (%d)\n", enable, s->enabled);
|
||||
#endif
|
||||
|
||||
if (s->enabled && !enable) {
|
||||
ptimer_stop(s->timer);
|
||||
}
|
||||
if (!s->enabled && enable) {
|
||||
ptimer_run(s->timer, 0);
|
||||
}
|
||||
s->enabled = !!enable;
|
||||
|
||||
#ifdef DEBUG_TIMER
|
||||
printf("sh_timer_start_stop done %d\n", s->enabled);
|
||||
#endif
|
||||
}
|
||||
|
||||
static void sh_timer_tick(void *opaque)
|
||||
{
|
||||
sh_timer_state *s = (sh_timer_state *)opaque;
|
||||
s->int_level = s->enabled;
|
||||
sh_timer_update(s);
|
||||
}
|
||||
|
||||
static void *sh_timer_init(uint32_t freq, int feat)
|
||||
{
|
||||
sh_timer_state *s;
|
||||
QEMUBH *bh;
|
||||
|
||||
s = (sh_timer_state *)qemu_mallocz(sizeof(sh_timer_state));
|
||||
s->freq = freq;
|
||||
s->feat = feat;
|
||||
s->tcor = 0xffffffff;
|
||||
s->tcnt = 0xffffffff;
|
||||
s->tcpr = 0xdeadbeef;
|
||||
s->tcor = 0;
|
||||
s->enabled = 0;
|
||||
|
||||
bh = qemu_bh_new(sh_timer_tick, s);
|
||||
s->timer = ptimer_init(bh);
|
||||
/* ??? Save/restore. */
|
||||
return s;
|
||||
}
|
||||
|
||||
typedef struct {
|
||||
void *timer[3];
|
||||
int level[3];
|
||||
uint32_t tocr;
|
||||
uint32_t tstr;
|
||||
target_phys_addr_t base;
|
||||
int feat;
|
||||
} tmu012_state;
|
||||
|
||||
static uint32_t tmu012_read(void *opaque, target_phys_addr_t offset)
|
||||
{
|
||||
tmu012_state *s = (tmu012_state *)opaque;
|
||||
|
||||
#ifdef DEBUG_TIMER
|
||||
printf("tmu012_read 0x%lx\n", (unsigned long) offset);
|
||||
#endif
|
||||
offset -= s->base;
|
||||
|
||||
if (offset >= 0x20) {
|
||||
if (!(s->feat & TMU012_FEAT_3CHAN))
|
||||
cpu_abort (cpu_single_env, "tmu012_write: Bad channel offset %x\n",
|
||||
(int)offset);
|
||||
return sh_timer_read(s->timer[2], offset - 0x20);
|
||||
}
|
||||
|
||||
if (offset >= 0x14)
|
||||
return sh_timer_read(s->timer[1], offset - 0x14);
|
||||
|
||||
if (offset >= 0x08)
|
||||
return sh_timer_read(s->timer[0], offset - 0x08);
|
||||
|
||||
if (offset == 4)
|
||||
return s->tstr;
|
||||
|
||||
if ((s->feat & TMU012_FEAT_TOCR) && offset == 0)
|
||||
return s->tocr;
|
||||
|
||||
cpu_abort (cpu_single_env, "tmu012_write: Bad offset %x\n",
|
||||
(int)offset);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void tmu012_write(void *opaque, target_phys_addr_t offset,
|
||||
uint32_t value)
|
||||
{
|
||||
tmu012_state *s = (tmu012_state *)opaque;
|
||||
|
||||
#ifdef DEBUG_TIMER
|
||||
printf("tmu012_write 0x%lx 0x%08x\n", (unsigned long) offset, value);
|
||||
#endif
|
||||
offset -= s->base;
|
||||
|
||||
if (offset >= 0x20) {
|
||||
if (!(s->feat & TMU012_FEAT_3CHAN))
|
||||
cpu_abort (cpu_single_env, "tmu012_write: Bad channel offset %x\n",
|
||||
(int)offset);
|
||||
sh_timer_write(s->timer[2], offset - 0x20, value);
|
||||
return;
|
||||
}
|
||||
|
||||
if (offset >= 0x14) {
|
||||
sh_timer_write(s->timer[1], offset - 0x14, value);
|
||||
return;
|
||||
}
|
||||
|
||||
if (offset >= 0x08) {
|
||||
sh_timer_write(s->timer[0], offset - 0x08, value);
|
||||
return;
|
||||
}
|
||||
|
||||
if (offset == 4) {
|
||||
sh_timer_start_stop(s->timer[0], value & (1 << 0));
|
||||
sh_timer_start_stop(s->timer[1], value & (1 << 1));
|
||||
if (s->feat & TMU012_FEAT_3CHAN)
|
||||
sh_timer_start_stop(s->timer[2], value & (1 << 2));
|
||||
else
|
||||
if (value & (1 << 2))
|
||||
cpu_abort (cpu_single_env, "tmu012_write: Bad channel\n");
|
||||
|
||||
s->tstr = value;
|
||||
return;
|
||||
}
|
||||
|
||||
if ((s->feat & TMU012_FEAT_TOCR) && offset == 0) {
|
||||
s->tocr = value & (1 << 0);
|
||||
}
|
||||
}
|
||||
|
||||
static CPUReadMemoryFunc *tmu012_readfn[] = {
|
||||
tmu012_read,
|
||||
tmu012_read,
|
||||
tmu012_read
|
||||
};
|
||||
|
||||
static CPUWriteMemoryFunc *tmu012_writefn[] = {
|
||||
tmu012_write,
|
||||
tmu012_write,
|
||||
tmu012_write
|
||||
};
|
||||
|
||||
void tmu012_init(uint32_t base, int feat, uint32_t freq)
|
||||
{
|
||||
int iomemtype;
|
||||
tmu012_state *s;
|
||||
int timer_feat = (feat & TMU012_FEAT_EXTCLK) ? TIMER_FEAT_EXTCLK : 0;
|
||||
|
||||
s = (tmu012_state *)qemu_mallocz(sizeof(tmu012_state));
|
||||
s->base = base;
|
||||
s->feat = feat;
|
||||
s->timer[0] = sh_timer_init(freq, timer_feat);
|
||||
s->timer[1] = sh_timer_init(freq, timer_feat);
|
||||
if (feat & TMU012_FEAT_3CHAN)
|
||||
s->timer[2] = sh_timer_init(freq, timer_feat | TIMER_FEAT_CAPT);
|
||||
iomemtype = cpu_register_io_memory(0, tmu012_readfn,
|
||||
tmu012_writefn, s);
|
||||
cpu_register_physical_memory(base, 0x00001000, iomemtype);
|
||||
/* ??? Save/restore. */
|
||||
}
|
||||
6
vl.h
6
vl.h
@ -1517,6 +1517,12 @@ typedef struct {
|
||||
|
||||
int sh7750_register_io_device(struct SH7750State *s,
|
||||
sh7750_io_device * device);
|
||||
/* sh_timer.c */
|
||||
#define TMU012_FEAT_TOCR (1 << 0)
|
||||
#define TMU012_FEAT_3CHAN (1 << 1)
|
||||
#define TMU012_FEAT_EXTCLK (1 << 2)
|
||||
void tmu012_init(uint32_t base, int feat, uint32_t freq);
|
||||
|
||||
/* tc58128.c */
|
||||
int tc58128_init(struct SH7750State *s, char *zone1, char *zone2);
|
||||
|
||||
|
||||
Loading…
Reference in New Issue
Block a user