vdpa: always start CVQ in SVQ mode if possible

Isolate control virtqueue in its own group, allowing to intercept control
commands but letting dataplane run totally passthrough to the guest.

Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20221215113144.322011-13-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>

hw/virtio/vhost-vdpa.c

@@ -638,7 +638,8 @@ static int vhost_vdpa_set_backend_cap(struct vhost_dev *dev)
 {
     uint64_t features;
     uint64_t f = 0x1ULL << VHOST_BACKEND_F_IOTLB_MSG_V2 |
-        0x1ULL << VHOST_BACKEND_F_IOTLB_BATCH;
+        0x1ULL << VHOST_BACKEND_F_IOTLB_BATCH |
+        0x1ULL << VHOST_BACKEND_F_IOTLB_ASID;
     int r;
 
     if (vhost_vdpa_call(dev, VHOST_GET_BACKEND_FEATURES, &features)) {

net/vhost-vdpa.c

@@ -102,6 +102,8 @@ static const uint64_t vdpa_svq_device_features =
     BIT_ULL(VIRTIO_NET_F_RSC_EXT) |
     BIT_ULL(VIRTIO_NET_F_STANDBY);
 
+#define VHOST_VDPA_NET_CVQ_ASID 1
+
 VHostNetState *vhost_vdpa_get_vhost_net(NetClientState *nc)
 {
     VhostVDPAState *s = DO_UPCAST(VhostVDPAState, nc, nc);
@@ -243,6 +245,40 @@ static NetClientInfo net_vhost_vdpa_info = {
         .check_peer_type = vhost_vdpa_check_peer_type,
 };
 
+static int64_t vhost_vdpa_get_vring_group(int device_fd, unsigned vq_index)
+{
+    struct vhost_vring_state state = {
+        .index = vq_index,
+    };
+    int r = ioctl(device_fd, VHOST_VDPA_GET_VRING_GROUP, &state);
+
+    if (unlikely(r < 0)) {
+        error_report("Cannot get VQ %u group: %s", vq_index,
+                     g_strerror(errno));
+        return r;
+    }
+
+    return state.num;
+}
+
+static int vhost_vdpa_set_address_space_id(struct vhost_vdpa *v,
+                                           unsigned vq_group,
+                                           unsigned asid_num)
+{
+    struct vhost_vring_state asid = {
+        .index = vq_group,
+        .num = asid_num,
+    };
+    int r;
+
+    r = ioctl(v->device_fd, VHOST_VDPA_SET_GROUP_ASID, &asid);
+    if (unlikely(r < 0)) {
+        error_report("Can't set vq group %u asid %u, errno=%d (%s)",
+                     asid.index, asid.num, errno, g_strerror(errno));
+    }
+    return r;
+}
+
 static void vhost_vdpa_cvq_unmap_buf(struct vhost_vdpa *v, void *addr)
 {
     VhostIOVATree *tree = v->iova_tree;
@@ -317,11 +353,75 @@ dma_map_err:
 static int vhost_vdpa_net_cvq_start(NetClientState *nc)
 {
     VhostVDPAState *s;
-    int r;
+    struct vhost_vdpa *v;
+    uint64_t backend_features;
+    int64_t cvq_group;
+    int cvq_index, r;
 
     assert(nc->info->type == NET_CLIENT_DRIVER_VHOST_VDPA);
 
     s = DO_UPCAST(VhostVDPAState, nc, nc);
+    v = &s->vhost_vdpa;
+
+    v->shadow_data = s->always_svq;
+    v->shadow_vqs_enabled = s->always_svq;
+    s->vhost_vdpa.address_space_id = VHOST_VDPA_GUEST_PA_ASID;
+
+    if (s->always_svq) {
+        /* SVQ is already configured for all virtqueues */
+        goto out;
+    }
+
+    /*
+     * If we early return in these cases SVQ will not be enabled. The migration
+     * will be blocked as long as vhost-vdpa backends will not offer _F_LOG.
+     *
+     * Calling VHOST_GET_BACKEND_FEATURES as they are not available in v->dev
+     * yet.
+     */
+    r = ioctl(v->device_fd, VHOST_GET_BACKEND_FEATURES, &backend_features);
+    if (unlikely(r < 0)) {
+        error_report("Cannot get vdpa backend_features: %s(%d)",
+            g_strerror(errno), errno);
+        return -1;
+    }
+    if (!(backend_features & VHOST_BACKEND_F_IOTLB_ASID) ||
+        !vhost_vdpa_net_valid_svq_features(v->dev->features, NULL)) {
+        return 0;
+    }
+
+    /*
+     * Check if all the virtqueues of the virtio device are in a different vq
+     * than the last vq. VQ group of last group passed in cvq_group.
+     */
+    cvq_index = v->dev->vq_index_end - 1;
+    cvq_group = vhost_vdpa_get_vring_group(v->device_fd, cvq_index);
+    if (unlikely(cvq_group < 0)) {
+        return cvq_group;
+    }
+    for (int i = 0; i < cvq_index; ++i) {
+        int64_t group = vhost_vdpa_get_vring_group(v->device_fd, i);
+
+        if (unlikely(group < 0)) {
+            return group;
+        }
+
+        if (group == cvq_group) {
+            return 0;
+        }
+    }
+
+    r = vhost_vdpa_set_address_space_id(v, cvq_group, VHOST_VDPA_NET_CVQ_ASID);
+    if (unlikely(r < 0)) {
+        return r;
+    }
+
+    v->iova_tree = vhost_iova_tree_new(v->iova_range.first,
+                                       v->iova_range.last);
+    v->shadow_vqs_enabled = true;
+    s->vhost_vdpa.address_space_id = VHOST_VDPA_NET_CVQ_ASID;
+
+out:
     if (!s->vhost_vdpa.shadow_vqs_enabled) {
         return 0;
     }
@@ -350,6 +450,14 @@ static void vhost_vdpa_net_cvq_stop(NetClientState *nc)
     if (s->vhost_vdpa.shadow_vqs_enabled) {
         vhost_vdpa_cvq_unmap_buf(&s->vhost_vdpa, s->cvq_cmd_out_buffer);
         vhost_vdpa_cvq_unmap_buf(&s->vhost_vdpa, s->status);
+        if (!s->always_svq) {
+            /*
+             * If only the CVQ is shadowed we can delete this safely.
+             * If all the VQs are shadows this will be needed by the time the
+             * device is started again to register SVQ vrings and similar.
+             */
+            g_clear_pointer(&s->vhost_vdpa.iova_tree, vhost_iova_tree_delete);
+        }
     }
 }