From af0e00db0e389dfa33d597f917a21454643bd314 Mon Sep 17 00:00:00 2001 From: John Snow Date: Fri, 13 Nov 2015 14:31:42 -0500 Subject: [PATCH 1/6] atapi: add byte_count_limit helper Signed-off-by: John Snow Tested-by: Mark Cave-Ayland Message-id: 1447095959-10046-2-git-send-email-jsnow@redhat.com --- hw/ide/atapi.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) diff --git a/hw/ide/atapi.c b/hw/ide/atapi.c index cf0b78e3a4..42f78fbd7b 100644 --- a/hw/ide/atapi.c +++ b/hw/ide/atapi.c @@ -170,6 +170,17 @@ void ide_atapi_io_error(IDEState *s, int ret) } } +static uint16_t atapi_byte_count_limit(IDEState *s) +{ + uint16_t bcl; + + bcl = s->lcyl | (s->hcyl << 8); + if (bcl == 0xffff) { + return 0xfffe; + } + return bcl; +} + /* The whole ATAPI transfer logic is handled in this function */ void ide_atapi_cmd_reply_end(IDEState *s) { @@ -212,12 +223,10 @@ void ide_atapi_cmd_reply_end(IDEState *s) } else { /* a new transfer is needed */ s->nsector = (s->nsector & ~7) | ATAPI_INT_REASON_IO; - byte_count_limit = s->lcyl | (s->hcyl << 8); + byte_count_limit = atapi_byte_count_limit(s); #ifdef DEBUG_IDE_ATAPI printf("byte_count_limit=%d\n", byte_count_limit); #endif - if (byte_count_limit == 0xffff) - byte_count_limit--; size = s->packet_transfer_size; if (size > byte_count_limit) { /* byte count limit must be even if this case */ @@ -1272,8 +1281,7 @@ void ide_atapi_cmd(IDEState *s) * See ATA8 ACS3 section 7.17.6.49 and 7.21.5 */ if (!(atapi_cmd_table[s->io_buffer[0]].flags & NONDATA)) { /* TODO: Check IDENTIFY data word 125 for default BCL (currently 0) */ - uint16_t byte_count_limit = s->lcyl | (s->hcyl << 8); - if (!(byte_count_limit || s->atapi_dma)) { + if (!(atapi_byte_count_limit(s) || s->atapi_dma)) { /* TODO: Move abort back into core.c and make static inline again */ ide_abort_command(s); return; From f36aa12d2f2d5b5a877e38641183259e119e1568 Mon Sep 17 00:00:00 2001 From: John Snow Date: Fri, 13 Nov 2015 14:31:42 -0500 Subject: [PATCH 2/6] atapi: Prioritize unknown cmd error over BCL error If we don't know about the command at all, we need to prioritize that failure above the zero byte-count-limit failure. This fixes a failure in the sparc64 NetBSD 7.0 installer bootup. Reported-by: Mark Cave-Ayland Signed-off-by: John Snow Tested-by: Mark Cave-Ayland Message-id: 1447095959-10046-3-git-send-email-jsnow@redhat.com --- hw/ide/atapi.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/hw/ide/atapi.c b/hw/ide/atapi.c index 42f78fbd7b..ed8bb2c80a 100644 --- a/hw/ide/atapi.c +++ b/hw/ide/atapi.c @@ -1195,7 +1195,7 @@ enum { NONDATA = 0x04, }; -static const struct { +static const struct AtapiCmd { void (*handler)(IDEState *s, uint8_t *buf); int flags; } atapi_cmd_table[0x100] = { @@ -1222,9 +1222,9 @@ static const struct { void ide_atapi_cmd(IDEState *s) { - uint8_t *buf; + uint8_t *buf = s->io_buffer; + const struct AtapiCmd *cmd = &atapi_cmd_table[s->io_buffer[0]]; - buf = s->io_buffer; #ifdef DEBUG_IDE_ATAPI { int i; @@ -1235,14 +1235,14 @@ void ide_atapi_cmd(IDEState *s) printf("\n"); } #endif + /* * If there's a UNIT_ATTENTION condition pending, only command flagged with * ALLOW_UA are allowed to complete. with other commands getting a CHECK * condition response unless a higher priority status, defined by the drive * here, is pending. */ - if (s->sense_key == UNIT_ATTENTION && - !(atapi_cmd_table[s->io_buffer[0]].flags & ALLOW_UA)) { + if (s->sense_key == UNIT_ATTENTION && !(cmd->flags & ALLOW_UA)) { ide_atapi_cmd_check_status(s); return; } @@ -1253,7 +1253,7 @@ void ide_atapi_cmd(IDEState *s) * GET_EVENT_STATUS_NOTIFICATION to detect such tray open/close * states rely on this behavior. */ - if (!(atapi_cmd_table[s->io_buffer[0]].flags & ALLOW_UA) && + if (!(cmd->flags & ALLOW_UA) && !s->tray_open && blk_is_inserted(s->blk) && s->cdrom_changed) { if (s->cdrom_changed == 1) { @@ -1268,7 +1268,7 @@ void ide_atapi_cmd(IDEState *s) } /* Report a Not Ready condition if appropriate for the command */ - if ((atapi_cmd_table[s->io_buffer[0]].flags & CHECK_READY) && + if ((cmd->flags & CHECK_READY) && (!media_present(s) || !blk_is_inserted(s->blk))) { ide_atapi_cmd_error(s, NOT_READY, ASC_MEDIUM_NOT_PRESENT); @@ -1279,7 +1279,7 @@ void ide_atapi_cmd(IDEState *s) * If this is a data-transferring PIO command and BCL is 0, * we abort at the /ATA/ level, not the ATAPI level. * See ATA8 ACS3 section 7.17.6.49 and 7.21.5 */ - if (!(atapi_cmd_table[s->io_buffer[0]].flags & NONDATA)) { + if (cmd->handler && !(cmd->flags & NONDATA)) { /* TODO: Check IDENTIFY data word 125 for default BCL (currently 0) */ if (!(atapi_byte_count_limit(s) || s->atapi_dma)) { /* TODO: Move abort back into core.c and make static inline again */ @@ -1289,8 +1289,8 @@ void ide_atapi_cmd(IDEState *s) } /* Execute the command */ - if (atapi_cmd_table[s->io_buffer[0]].handler) { - atapi_cmd_table[s->io_buffer[0]].handler(s, buf); + if (cmd->handler) { + cmd->handler(s, buf); return; } From 6d9e7295c5ff6fdd2d7989639b836c6fdc01ac61 Mon Sep 17 00:00:00 2001 From: John Snow Date: Fri, 13 Nov 2015 14:31:42 -0500 Subject: [PATCH 3/6] ahci/qtest: don't use tcp sockets for migration tests Signed-off-by: John Snow Message-id: 1447108074-20609-1-git-send-email-jsnow@redhat.com --- tests/ahci-test.c | 25 ++++++++++++++++++++----- 1 file changed, 20 insertions(+), 5 deletions(-) diff --git a/tests/ahci-test.c b/tests/ahci-test.c index 59d387c6d0..1bb7410e7a 100644 --- a/tests/ahci-test.c +++ b/tests/ahci-test.c @@ -47,6 +47,7 @@ /*** Globals ***/ static char tmp_path[] = "/tmp/qtest.XXXXXX"; static char debug_path[] = "/tmp/qtest-blkdebug.XXXXXX"; +static char mig_socket[] = "/tmp/qtest-migration.XXXXXX"; static bool ahci_pedantic; /*** Function Declarations ***/ @@ -114,8 +115,11 @@ static void ahci_migrate(AHCIQState *from, AHCIQState *to, const char *uri) { QOSState *tmp = to->parent; QPCIDevice *dev = to->dev; + char *uri_local = NULL; + if (uri == NULL) { - uri = "tcp:127.0.0.1:1234"; + uri_local = g_strdup_printf("%s%s", "unix:", mig_socket); + uri = uri_local; } /* context will be 'to' after completion. */ @@ -135,6 +139,7 @@ static void ahci_migrate(AHCIQState *from, AHCIQState *to, const char *uri) from->dev = dev; verify_state(to); + g_free(uri_local); } /*** Test Setup & Teardown ***/ @@ -1105,7 +1110,7 @@ static void test_flush_retry(void) static void test_migrate_sanity(void) { AHCIQState *src, *dst; - const char *uri = "tcp:127.0.0.1:1234"; + char *uri = g_strdup_printf("unix:%s", mig_socket); src = ahci_boot("-m 1024 -M q35 " "-hda %s ", tmp_path); @@ -1117,6 +1122,7 @@ static void test_migrate_sanity(void) ahci_shutdown(src); ahci_shutdown(dst); + g_free(uri); } /** @@ -1129,7 +1135,7 @@ static void ahci_migrate_simple(uint8_t cmd_read, uint8_t cmd_write) size_t bufsize = 4096; unsigned char *tx = g_malloc(bufsize); unsigned char *rx = g_malloc0(bufsize); - const char *uri = "tcp:127.0.0.1:1234"; + char *uri = g_strdup_printf("unix:%s", mig_socket); src = ahci_boot_and_enable("-m 1024 -M q35 " "-hda %s ", tmp_path); @@ -1158,6 +1164,7 @@ static void ahci_migrate_simple(uint8_t cmd_read, uint8_t cmd_write) ahci_shutdown(dst); g_free(rx); g_free(tx); + g_free(uri); } static void test_migrate_dma(void) @@ -1251,7 +1258,7 @@ static void ahci_migrate_halted_io(uint8_t cmd_read, uint8_t cmd_write) unsigned char *rx = g_malloc0(bufsize); uint64_t ptr; AHCICommand *cmd; - const char *uri = "tcp:127.0.0.1:1234"; + char *uri = g_strdup_printf("unix:%s", mig_socket); prepare_blkdebug_script(debug_path, "write_aio"); @@ -1301,6 +1308,7 @@ static void ahci_migrate_halted_io(uint8_t cmd_read, uint8_t cmd_write) ahci_shutdown(dst); g_free(rx); g_free(tx); + g_free(uri); } static void test_migrate_halted_dma(void) @@ -1322,7 +1330,7 @@ static void test_flush_migrate(void) AHCICommand *cmd; uint8_t px; const char *s; - const char *uri = "tcp:127.0.0.1:1234"; + char *uri = g_strdup_printf("unix:%s", mig_socket); prepare_blkdebug_script(debug_path, "flush_to_disk"); @@ -1360,6 +1368,7 @@ static void test_flush_migrate(void) ahci_command_free(cmd); ahci_shutdown(src); ahci_shutdown(dst); + g_free(uri); } static void test_max(void) @@ -1626,6 +1635,11 @@ int main(int argc, char **argv) g_assert(fd >= 0); close(fd); + /* Reserve a hollow file to use as a socket for migration tests */ + fd = mkstemp(mig_socket); + g_assert(fd >= 0); + close(fd); + /* Run the tests */ qtest_add_func("/ahci/sanity", test_sanity); qtest_add_func("/ahci/pci_spec", test_pci_spec); @@ -1668,6 +1682,7 @@ int main(int argc, char **argv) /* Cleanup */ unlink(tmp_path); unlink(debug_path); + unlink(mig_socket); return ret; } From b236b61056ff0a6b69aa2a92cf5bb10a81450753 Mon Sep 17 00:00:00 2001 From: John Snow Date: Fri, 13 Nov 2015 14:31:42 -0500 Subject: [PATCH 4/6] qtest/ahci: always specify image format Signed-off-by: John Snow Message-id: 1447439479-16775-2-git-send-email-jsnow@redhat.com --- tests/ahci-test.c | 51 +++++++++++++++++++++++++++-------------------- 1 file changed, 29 insertions(+), 22 deletions(-) diff --git a/tests/ahci-test.c b/tests/ahci-test.c index 1bb7410e7a..9bf5f2c940 100644 --- a/tests/ahci-test.c +++ b/tests/ahci-test.c @@ -49,6 +49,7 @@ static char tmp_path[] = "/tmp/qtest.XXXXXX"; static char debug_path[] = "/tmp/qtest-blkdebug.XXXXXX"; static char mig_socket[] = "/tmp/qtest-migration.XXXXXX"; static bool ahci_pedantic; +static const char *imgfmt; /*** Function Declarations ***/ static void ahci_test_port_spec(AHCIQState *ahci, uint8_t port); @@ -175,11 +176,11 @@ static AHCIQState *ahci_boot(const char *cli, ...) va_end(ap); } else { cli = "-drive if=none,id=drive0,file=%s,cache=writeback,serial=%s" - ",format=qcow2" + ",format=%s" " -M q35 " "-device ide-hd,drive=drive0 " "-global ide-hd.ver=%s"; - s = ahci_boot(cli, tmp_path, "testdisk", "version"); + s = ahci_boot(cli, tmp_path, "testdisk", imgfmt, "version"); } return s; @@ -1078,12 +1079,12 @@ static void test_flush_retry(void) prepare_blkdebug_script(debug_path, "flush_to_disk"); ahci = ahci_boot_and_enable("-drive file=blkdebug:%s:%s,if=none,id=drive0," - "format=qcow2,cache=writeback," + "format=%s,cache=writeback," "rerror=stop,werror=stop " "-M q35 " "-device ide-hd,drive=drive0 ", debug_path, - tmp_path); + tmp_path, imgfmt); /* Issue Flush Command and wait for error */ port = ahci_port_select(ahci); @@ -1113,10 +1114,10 @@ static void test_migrate_sanity(void) char *uri = g_strdup_printf("unix:%s", mig_socket); src = ahci_boot("-m 1024 -M q35 " - "-hda %s ", tmp_path); + "-drive if=ide,file=%s,format=%s ", tmp_path, imgfmt); dst = ahci_boot("-m 1024 -M q35 " - "-hda %s " - "-incoming %s", tmp_path, uri); + "-drive if=ide,file=%s,format=%s " + "-incoming %s", tmp_path, imgfmt, uri); ahci_migrate(src, dst, uri); @@ -1138,10 +1139,11 @@ static void ahci_migrate_simple(uint8_t cmd_read, uint8_t cmd_write) char *uri = g_strdup_printf("unix:%s", mig_socket); src = ahci_boot_and_enable("-m 1024 -M q35 " - "-hda %s ", tmp_path); + "-drive if=ide,format=%s,file=%s ", + imgfmt, tmp_path); dst = ahci_boot("-m 1024 -M q35 " - "-hda %s " - "-incoming %s", tmp_path, uri); + "-drive if=ide,format=%s,file=%s " + "-incoming %s", imgfmt, tmp_path, uri); set_context(src->parent); @@ -1197,12 +1199,12 @@ static void ahci_halted_io_test(uint8_t cmd_read, uint8_t cmd_write) prepare_blkdebug_script(debug_path, "write_aio"); ahci = ahci_boot_and_enable("-drive file=blkdebug:%s:%s,if=none,id=drive0," - "format=qcow2,cache=writeback," + "format=%s,cache=writeback," "rerror=stop,werror=stop " "-M q35 " "-device ide-hd,drive=drive0 ", debug_path, - tmp_path); + tmp_path, imgfmt); /* Initialize and prepare */ port = ahci_port_select(ahci); @@ -1263,20 +1265,20 @@ static void ahci_migrate_halted_io(uint8_t cmd_read, uint8_t cmd_write) prepare_blkdebug_script(debug_path, "write_aio"); src = ahci_boot_and_enable("-drive file=blkdebug:%s:%s,if=none,id=drive0," - "format=qcow2,cache=writeback," + "format=%s,cache=writeback," "rerror=stop,werror=stop " "-M q35 " "-device ide-hd,drive=drive0 ", debug_path, - tmp_path); + tmp_path, imgfmt); dst = ahci_boot("-drive file=%s,if=none,id=drive0," - "format=qcow2,cache=writeback," + "format=%s,cache=writeback," "rerror=stop,werror=stop " "-M q35 " "-device ide-hd,drive=drive0 " "-incoming %s", - tmp_path, uri); + tmp_path, imgfmt, uri); set_context(src->parent); @@ -1335,15 +1337,17 @@ static void test_flush_migrate(void) prepare_blkdebug_script(debug_path, "flush_to_disk"); src = ahci_boot_and_enable("-drive file=blkdebug:%s:%s,if=none,id=drive0," - "cache=writeback,rerror=stop,werror=stop " + "cache=writeback,rerror=stop,werror=stop," + "format=%s " "-M q35 " "-device ide-hd,drive=drive0 ", - debug_path, tmp_path); + debug_path, tmp_path, imgfmt); dst = ahci_boot("-drive file=%s,if=none,id=drive0," - "cache=writeback,rerror=stop,werror=stop " + "cache=writeback,rerror=stop,werror=stop," + "format=%s " "-M q35 " "-device ide-hd,drive=drive0 " - "-incoming %s", tmp_path, uri); + "-incoming %s", tmp_path, imgfmt, uri); set_context(src->parent); @@ -1626,9 +1630,12 @@ int main(int argc, char **argv) return 0; } - /* Create a temporary qcow2 image */ - close(mkstemp(tmp_path)); + /* Create a temporary image */ + fd = mkstemp(tmp_path); + g_assert(fd >= 0); + imgfmt = "qcow2"; mkqcow2(tmp_path, TEST_IMAGE_SIZE_MB); + close(fd); /* Create temporary blkdebug instructions */ fd = mkstemp(debug_path); From cb11e7b2f3878575f23d49454c02d8dce35c8d35 Mon Sep 17 00:00:00 2001 From: John Snow Date: Fri, 13 Nov 2015 14:31:42 -0500 Subject: [PATCH 5/6] libqos: add qemu-img presence check To allow tests to optionally exercise additional tests that require the qemu-img tool that may not be present in all builds. Signed-off-by: John Snow Message-id: 1447439479-16775-3-git-send-email-jsnow@redhat.com --- tests/libqos/libqos.c | 28 +++++++++++++++++++++++----- tests/libqos/libqos.h | 1 + 2 files changed, 24 insertions(+), 5 deletions(-) diff --git a/tests/libqos/libqos.c b/tests/libqos/libqos.c index 8d7c5a9db8..2d1a802dbe 100644 --- a/tests/libqos/libqos.c +++ b/tests/libqos/libqos.c @@ -147,6 +147,23 @@ void migrate(QOSState *from, QOSState *to, const char *uri) set_context(to); } +bool have_qemu_img(void) +{ + char *rpath; + const char *path = getenv("QTEST_QEMU_IMG"); + if (!path) { + return false; + } + + rpath = realpath(path, NULL); + if (!rpath) { + return false; + } else { + free(rpath); + return true; + } +} + void mkimg(const char *file, const char *fmt, unsigned size_mb) { gchar *cli; @@ -155,13 +172,14 @@ void mkimg(const char *file, const char *fmt, unsigned size_mb) GError *err = NULL; char *qemu_img_path; gchar *out, *out2; - char *abs_path; + char *qemu_img_abs_path; qemu_img_path = getenv("QTEST_QEMU_IMG"); - abs_path = realpath(qemu_img_path, NULL); - assert(qemu_img_path); + g_assert(qemu_img_path); + qemu_img_abs_path = realpath(qemu_img_path, NULL); + g_assert(qemu_img_abs_path); - cli = g_strdup_printf("%s create -f %s %s %uM", abs_path, + cli = g_strdup_printf("%s create -f %s %s %uM", qemu_img_abs_path, fmt, file, size_mb); ret = g_spawn_command_line_sync(cli, &out, &out2, &rc, &err); if (err) { @@ -183,7 +201,7 @@ void mkimg(const char *file, const char *fmt, unsigned size_mb) g_free(out); g_free(out2); g_free(cli); - free(abs_path); + free(qemu_img_abs_path); } void mkqcow2(const char *file, unsigned size_mb) diff --git a/tests/libqos/libqos.h b/tests/libqos/libqos.h index 492a651f5b..ca14d2e9fe 100644 --- a/tests/libqos/libqos.h +++ b/tests/libqos/libqos.h @@ -19,6 +19,7 @@ typedef struct QOSState { QOSState *qtest_vboot(QOSOps *ops, const char *cmdline_fmt, va_list ap); QOSState *qtest_boot(QOSOps *ops, const char *cmdline_fmt, ...); void qtest_shutdown(QOSState *qs); +bool have_qemu_img(void); void mkimg(const char *file, const char *fmt, unsigned size_mb); void mkqcow2(const char *file, unsigned size_mb); void set_context(QOSState *s); From 917158dc3b22924922dc1f3b9d4049a4fc83d926 Mon Sep 17 00:00:00 2001 From: John Snow Date: Fri, 13 Nov 2015 14:31:43 -0500 Subject: [PATCH 6/6] qtest/ahci: use raw format when qemu-img is absent If we don't have the qemu-img tool, use the raw format for tests and skip the high-sector LBA48 tests. Signed-off-by: John Snow Message-id: 1447439479-16775-4-git-send-email-jsnow@redhat.com --- tests/ahci-test.c | 41 ++++++++++++++++++++++++++++++++--------- 1 file changed, 32 insertions(+), 9 deletions(-) diff --git a/tests/ahci-test.c b/tests/ahci-test.c index 9bf5f2c940..088850642e 100644 --- a/tests/ahci-test.c +++ b/tests/ahci-test.c @@ -39,10 +39,9 @@ #include "hw/pci/pci_ids.h" #include "hw/pci/pci_regs.h" -/* Test-specific defines -- in MiB */ -#define TEST_IMAGE_SIZE_MB (200 * 1024) -#define TEST_IMAGE_SECTORS ((TEST_IMAGE_SIZE_MB / AHCI_SECTOR_SIZE) \ - * 1024 * 1024) +/* Test images sizes in MB */ +#define TEST_IMAGE_SIZE_MB_LARGE (200 * 1024) +#define TEST_IMAGE_SIZE_MB_SMALL 64 /*** Globals ***/ static char tmp_path[] = "/tmp/qtest.XXXXXX"; @@ -50,6 +49,7 @@ static char debug_path[] = "/tmp/qtest-blkdebug.XXXXXX"; static char mig_socket[] = "/tmp/qtest-migration.XXXXXX"; static bool ahci_pedantic; static const char *imgfmt; +static unsigned test_image_size_mb; /*** Function Declarations ***/ static void ahci_test_port_spec(AHCIQState *ahci, uint8_t port); @@ -62,6 +62,11 @@ static void ahci_test_pmcap(AHCIQState *ahci, uint8_t offset); /*** Utilities ***/ +static uint64_t mb_to_sectors(uint64_t image_size_mb) +{ + return (image_size_mb * 1024 * 1024) / AHCI_SECTOR_SIZE; +} + static void string_bswap16(uint16_t *s, size_t bytes) { g_assert_cmphex((bytes & 1), ==, 0); @@ -906,7 +911,7 @@ static void ahci_test_max(AHCIQState *ahci) uint64_t nsect; uint8_t port; uint8_t cmd; - uint64_t config_sect = TEST_IMAGE_SECTORS - 1; + uint64_t config_sect = mb_to_sectors(test_image_size_mb) - 1; if (config_sect > 0xFFFFFF) { cmd = CMD_READ_MAX_EXT; @@ -1489,7 +1494,7 @@ static uint64_t offset_sector(enum OffsetType ofst, return 1; case OFFSET_HIGH: ceil = (addr_type == ADDR_MODE_LBA28) ? 0xfffffff : 0xffffffffffff; - ceil = MIN(ceil, TEST_IMAGE_SECTORS - 1); + ceil = MIN(ceil, mb_to_sectors(test_image_size_mb) - 1); nsectors = buffsize / AHCI_SECTOR_SIZE; return ceil - nsectors + 1; default: @@ -1571,8 +1576,9 @@ static void create_ahci_io_test(enum IOMode type, enum AddrMode addr, enum BuffLen len, enum OffsetType offset) { char *name; - AHCIIOTestOptions *opts = g_malloc(sizeof(AHCIIOTestOptions)); + AHCIIOTestOptions *opts; + opts = g_malloc(sizeof(AHCIIOTestOptions)); opts->length = len; opts->address_type = addr; opts->io_type = type; @@ -1584,6 +1590,13 @@ static void create_ahci_io_test(enum IOMode type, enum AddrMode addr, buff_len_str[len], offset_str[offset]); + if ((addr == ADDR_MODE_LBA48) && (offset == OFFSET_HIGH) && + (mb_to_sectors(test_image_size_mb) <= 0xFFFFFFF)) { + g_test_message("%s: skipped; test image too small", name); + g_free(name); + return; + } + qtest_add_data_func(name, opts, test_io_interface); g_free(name); } @@ -1633,8 +1646,18 @@ int main(int argc, char **argv) /* Create a temporary image */ fd = mkstemp(tmp_path); g_assert(fd >= 0); - imgfmt = "qcow2"; - mkqcow2(tmp_path, TEST_IMAGE_SIZE_MB); + if (have_qemu_img()) { + imgfmt = "qcow2"; + test_image_size_mb = TEST_IMAGE_SIZE_MB_LARGE; + mkqcow2(tmp_path, TEST_IMAGE_SIZE_MB_LARGE); + } else { + g_test_message("QTEST_QEMU_IMG not set or qemu-img missing; " + "skipping LBA48 high-sector tests"); + imgfmt = "raw"; + test_image_size_mb = TEST_IMAGE_SIZE_MB_SMALL; + ret = ftruncate(fd, test_image_size_mb * 1024 * 1024); + g_assert(ret == 0); + } close(fd); /* Create temporary blkdebug instructions */