Handle on-chip DMA controllers in one place, convert OMAP DMA to use it.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4920 c046a42c-6fe2-441c-8c8c-71466251a162
This commit is contained in:
parent
51fec3cc7e
commit
afbb5194d4
@ -594,7 +594,7 @@ OBJS+= pxa2xx_lcd.o pxa2xx_mmci.o pxa2xx_pcmcia.o pxa2xx_keypad.o
|
|||||||
OBJS+= pflash_cfi01.o gumstix.o
|
OBJS+= pflash_cfi01.o gumstix.o
|
||||||
OBJS+= zaurus.o ide.o serial.o nand.o ecc.o spitz.o tosa.o tc6393xb.o
|
OBJS+= zaurus.o ide.o serial.o nand.o ecc.o spitz.o tosa.o tc6393xb.o
|
||||||
OBJS+= omap1.o omap_lcdc.o omap_dma.o omap_clk.o omap_mmc.o omap_i2c.o
|
OBJS+= omap1.o omap_lcdc.o omap_dma.o omap_clk.o omap_mmc.o omap_i2c.o
|
||||||
OBJS+= omap2.o omap_dss.o
|
OBJS+= omap2.o omap_dss.o soc_dma.o
|
||||||
OBJS+= palm.o tsc210x.o
|
OBJS+= palm.o tsc210x.o
|
||||||
OBJS+= nseries.o blizzard.o onenand.o vga.o cbus.o tusb6010.o usb-musb.o
|
OBJS+= nseries.o blizzard.o onenand.o vga.o cbus.o tusb6010.o usb-musb.o
|
||||||
OBJS+= tsc2005.o
|
OBJS+= tsc2005.o
|
||||||
|
12
hw/omap.h
12
hw/omap.h
@ -417,14 +417,14 @@ enum omap_dma_model {
|
|||||||
omap_dma_4,
|
omap_dma_4,
|
||||||
};
|
};
|
||||||
|
|
||||||
struct omap_dma_s;
|
struct soc_dma_s;
|
||||||
struct omap_dma_s *omap_dma_init(target_phys_addr_t base, qemu_irq *irqs,
|
struct soc_dma_s *omap_dma_init(target_phys_addr_t base, qemu_irq *irqs,
|
||||||
qemu_irq lcd_irq, struct omap_mpu_state_s *mpu, omap_clk clk,
|
qemu_irq lcd_irq, struct omap_mpu_state_s *mpu, omap_clk clk,
|
||||||
enum omap_dma_model model);
|
enum omap_dma_model model);
|
||||||
struct omap_dma_s *omap_dma4_init(target_phys_addr_t base, qemu_irq *irqs,
|
struct soc_dma_s *omap_dma4_init(target_phys_addr_t base, qemu_irq *irqs,
|
||||||
struct omap_mpu_state_s *mpu, int fifo,
|
struct omap_mpu_state_s *mpu, int fifo,
|
||||||
int chans, omap_clk iclk, omap_clk fclk);
|
int chans, omap_clk iclk, omap_clk fclk);
|
||||||
void omap_dma_reset(struct omap_dma_s *s);
|
void omap_dma_reset(struct soc_dma_s *s);
|
||||||
|
|
||||||
struct dma_irq_map {
|
struct dma_irq_map {
|
||||||
int ih;
|
int ih;
|
||||||
@ -494,7 +494,7 @@ struct omap_dma_lcd_channel_s {
|
|||||||
ram_addr_t phys_framebuffer[2];
|
ram_addr_t phys_framebuffer[2];
|
||||||
qemu_irq irq;
|
qemu_irq irq;
|
||||||
struct omap_mpu_state_s *mpu;
|
struct omap_mpu_state_s *mpu;
|
||||||
} *omap_dma_get_lcdch(struct omap_dma_s *s);
|
} *omap_dma_get_lcdch(struct soc_dma_s *s);
|
||||||
|
|
||||||
/*
|
/*
|
||||||
* DMA request numbers for OMAP1
|
* DMA request numbers for OMAP1
|
||||||
@ -882,7 +882,7 @@ struct omap_mpu_state_s {
|
|||||||
/* MPU private TIPB peripherals */
|
/* MPU private TIPB peripherals */
|
||||||
struct omap_intr_handler_s *ih[2];
|
struct omap_intr_handler_s *ih[2];
|
||||||
|
|
||||||
struct omap_dma_s *dma;
|
struct soc_dma_s *dma;
|
||||||
|
|
||||||
struct omap_mpu_timer_s *timer[3];
|
struct omap_mpu_timer_s *timer[3];
|
||||||
struct omap_watchdog_timer_s *wdt;
|
struct omap_watchdog_timer_s *wdt;
|
||||||
|
@ -24,6 +24,7 @@
|
|||||||
#include "sysemu.h"
|
#include "sysemu.h"
|
||||||
#include "qemu-timer.h"
|
#include "qemu-timer.h"
|
||||||
#include "qemu-char.h"
|
#include "qemu-char.h"
|
||||||
|
#include "soc_dma.h"
|
||||||
/* We use pc-style serial ports. */
|
/* We use pc-style serial ports. */
|
||||||
#include "pc.h"
|
#include "pc.h"
|
||||||
|
|
||||||
@ -4704,6 +4705,12 @@ struct omap_mpu_state_s *omap310_mpu_init(unsigned long sdram_size,
|
|||||||
s->port[local ].addr_valid = omap_validate_local_addr;
|
s->port[local ].addr_valid = omap_validate_local_addr;
|
||||||
s->port[tipb_mpui].addr_valid = omap_validate_tipb_mpui_addr;
|
s->port[tipb_mpui].addr_valid = omap_validate_tipb_mpui_addr;
|
||||||
|
|
||||||
|
/* Register SDRAM and SRAM DMA ports for fast transfers. */
|
||||||
|
soc_dma_port_add_mem_ram(s->dma,
|
||||||
|
emiff_base, OMAP_EMIFF_BASE, s->sdram_size);
|
||||||
|
soc_dma_port_add_mem_ram(s->dma,
|
||||||
|
imif_base, OMAP_IMIF_BASE, s->sram_size);
|
||||||
|
|
||||||
s->timer[0] = omap_mpu_timer_init(0xfffec500,
|
s->timer[0] = omap_mpu_timer_init(0xfffec500,
|
||||||
s->irq[0][OMAP_INT_TIMER1],
|
s->irq[0][OMAP_INT_TIMER1],
|
||||||
omap_findclk(s, "mputim_ck"));
|
omap_findclk(s, "mputim_ck"));
|
||||||
|
@ -26,6 +26,7 @@
|
|||||||
#include "qemu-timer.h"
|
#include "qemu-timer.h"
|
||||||
#include "qemu-char.h"
|
#include "qemu-char.h"
|
||||||
#include "flash.h"
|
#include "flash.h"
|
||||||
|
#include "soc_dma.h"
|
||||||
#include "audio/audio.h"
|
#include "audio/audio.h"
|
||||||
|
|
||||||
/* GP timers */
|
/* GP timers */
|
||||||
@ -4493,6 +4494,10 @@ struct omap_mpu_state_s *omap2420_mpu_init(unsigned long sdram_size,
|
|||||||
omap_findclk(s, "sdma_fclk"));
|
omap_findclk(s, "sdma_fclk"));
|
||||||
s->port->addr_valid = omap2_validate_addr;
|
s->port->addr_valid = omap2_validate_addr;
|
||||||
|
|
||||||
|
/* Register SDRAM and SRAM ports for fast DMA transfers. */
|
||||||
|
soc_dma_port_add_mem_ram(s->dma, q2_base, OMAP2_Q2_BASE, s->sdram_size);
|
||||||
|
soc_dma_port_add_mem_ram(s->dma, sram_base, OMAP2_SRAM_BASE, s->sram_size);
|
||||||
|
|
||||||
s->uart[0] = omap2_uart_init(omap_l4ta(s->l4, 19),
|
s->uart[0] = omap2_uart_init(omap_l4ta(s->l4, 19),
|
||||||
s->irq[0][OMAP_INT_24XX_UART1_IRQ],
|
s->irq[0][OMAP_INT_24XX_UART1_IRQ],
|
||||||
omap_findclk(s, "uart1_fclk"),
|
omap_findclk(s, "uart1_fclk"),
|
||||||
|
561
hw/omap_dma.c
561
hw/omap_dma.c
@ -23,6 +23,7 @@
|
|||||||
#include "qemu-timer.h"
|
#include "qemu-timer.h"
|
||||||
#include "omap.h"
|
#include "omap.h"
|
||||||
#include "irq.h"
|
#include "irq.h"
|
||||||
|
#include "soc_dma.h"
|
||||||
|
|
||||||
struct omap_dma_channel_s {
|
struct omap_dma_channel_s {
|
||||||
/* transfer data */
|
/* transfer data */
|
||||||
@ -66,6 +67,7 @@ struct omap_dma_channel_s {
|
|||||||
int pending_request;
|
int pending_request;
|
||||||
int waiting_end_prog;
|
int waiting_end_prog;
|
||||||
uint16_t cpc;
|
uint16_t cpc;
|
||||||
|
int set_update;
|
||||||
|
|
||||||
/* sync type */
|
/* sync type */
|
||||||
int fs;
|
int fs;
|
||||||
@ -89,6 +91,8 @@ struct omap_dma_channel_s {
|
|||||||
int pck_elements;
|
int pck_elements;
|
||||||
} active_set;
|
} active_set;
|
||||||
|
|
||||||
|
struct soc_dma_ch_s *dma;
|
||||||
|
|
||||||
/* unused parameters */
|
/* unused parameters */
|
||||||
int write_mode;
|
int write_mode;
|
||||||
int priority;
|
int priority;
|
||||||
@ -99,12 +103,11 @@ struct omap_dma_channel_s {
|
|||||||
};
|
};
|
||||||
|
|
||||||
struct omap_dma_s {
|
struct omap_dma_s {
|
||||||
QEMUTimer *tm;
|
struct soc_dma_s *dma;
|
||||||
|
|
||||||
struct omap_mpu_state_s *mpu;
|
struct omap_mpu_state_s *mpu;
|
||||||
target_phys_addr_t base;
|
target_phys_addr_t base;
|
||||||
omap_clk clk;
|
omap_clk clk;
|
||||||
int64_t delay;
|
|
||||||
uint64_t drq;
|
|
||||||
qemu_irq irq[4];
|
qemu_irq irq[4];
|
||||||
void (*intr_update)(struct omap_dma_s *s);
|
void (*intr_update)(struct omap_dma_s *s);
|
||||||
enum omap_dma_model model;
|
enum omap_dma_model model;
|
||||||
@ -115,7 +118,6 @@ struct omap_dma_s {
|
|||||||
uint32_t caps[5];
|
uint32_t caps[5];
|
||||||
uint32_t irqen[4];
|
uint32_t irqen[4];
|
||||||
uint32_t irqstat[4];
|
uint32_t irqstat[4];
|
||||||
int run_count;
|
|
||||||
|
|
||||||
int chans;
|
int chans;
|
||||||
struct omap_dma_channel_s ch[32];
|
struct omap_dma_channel_s ch[32];
|
||||||
@ -139,11 +141,10 @@ static inline void omap_dma_interrupts_update(struct omap_dma_s *s)
|
|||||||
return s->intr_update(s);
|
return s->intr_update(s);
|
||||||
}
|
}
|
||||||
|
|
||||||
static void omap_dma_channel_load(struct omap_dma_s *s,
|
static void omap_dma_channel_load(struct omap_dma_channel_s *ch)
|
||||||
struct omap_dma_channel_s *ch)
|
|
||||||
{
|
{
|
||||||
struct omap_dma_reg_set_s *a = &ch->active_set;
|
struct omap_dma_reg_set_s *a = &ch->active_set;
|
||||||
int i;
|
int i, normal;
|
||||||
int omap_3_1 = !ch->omap_3_1_compatible_disable;
|
int omap_3_1 = !ch->omap_3_1_compatible_disable;
|
||||||
|
|
||||||
/*
|
/*
|
||||||
@ -189,20 +190,50 @@ static void omap_dma_channel_load(struct omap_dma_s *s,
|
|||||||
default:
|
default:
|
||||||
break;
|
break;
|
||||||
}
|
}
|
||||||
|
|
||||||
|
normal = !ch->transparent_copy && !ch->constant_fill &&
|
||||||
|
/* FIFO is big-endian so either (ch->endian[n] == 1) OR
|
||||||
|
* (ch->endian_lock[n] == 1) mean no endianism conversion. */
|
||||||
|
(ch->endian[0] | ch->endian_lock[0]) ==
|
||||||
|
(ch->endian[1] | ch->endian_lock[1]);
|
||||||
|
for (i = 0; i < 2; i ++) {
|
||||||
|
/* TODO: for a->frame_delta[i] > 0 still use the fast path, just
|
||||||
|
* limit min_elems in omap_dma_transfer_setup to the nearest frame
|
||||||
|
* end. */
|
||||||
|
if (!a->elem_delta[i] && normal &&
|
||||||
|
(a->frames == 1 || !a->frame_delta[i]))
|
||||||
|
ch->dma->type[i] = soc_dma_access_const;
|
||||||
|
else if (a->elem_delta[i] == ch->data_type && normal &&
|
||||||
|
(a->frames == 1 || !a->frame_delta[i]))
|
||||||
|
ch->dma->type[i] = soc_dma_access_linear;
|
||||||
|
else
|
||||||
|
ch->dma->type[i] = soc_dma_access_other;
|
||||||
|
|
||||||
|
ch->dma->vaddr[i] = ch->addr[i];
|
||||||
|
}
|
||||||
|
soc_dma_ch_update(ch->dma);
|
||||||
}
|
}
|
||||||
|
|
||||||
static void omap_dma_activate_channel(struct omap_dma_s *s,
|
static void omap_dma_activate_channel(struct omap_dma_s *s,
|
||||||
struct omap_dma_channel_s *ch)
|
struct omap_dma_channel_s *ch)
|
||||||
{
|
{
|
||||||
if (!ch->active) {
|
if (!ch->active) {
|
||||||
|
if (ch->set_update) {
|
||||||
|
/* It's not clear when the active set is supposed to be
|
||||||
|
* loaded from registers. We're already loading it when the
|
||||||
|
* channel is enabled, and for some guests this is not enough
|
||||||
|
* but that may be also because of a race condition (no
|
||||||
|
* delays in qemu) in the guest code, which we're just
|
||||||
|
* working around here. */
|
||||||
|
omap_dma_channel_load(ch);
|
||||||
|
ch->set_update = 0;
|
||||||
|
}
|
||||||
|
|
||||||
ch->active = 1;
|
ch->active = 1;
|
||||||
|
soc_dma_set_request(ch->dma, 1);
|
||||||
if (ch->sync)
|
if (ch->sync)
|
||||||
ch->status |= SYNC;
|
ch->status |= SYNC;
|
||||||
s->run_count ++;
|
|
||||||
}
|
}
|
||||||
|
|
||||||
if (s->delay && !qemu_timer_pending(s->tm))
|
|
||||||
qemu_mod_timer(s->tm, qemu_get_clock(vm_clock) + s->delay);
|
|
||||||
}
|
}
|
||||||
|
|
||||||
static void omap_dma_deactivate_channel(struct omap_dma_s *s,
|
static void omap_dma_deactivate_channel(struct omap_dma_s *s,
|
||||||
@ -219,17 +250,14 @@ static void omap_dma_deactivate_channel(struct omap_dma_s *s,
|
|||||||
|
|
||||||
/* Don't deactive the channel if it is synchronized and the DMA request is
|
/* Don't deactive the channel if it is synchronized and the DMA request is
|
||||||
active */
|
active */
|
||||||
if (ch->sync && ch->enable && (s->drq & (1 << ch->sync)))
|
if (ch->sync && ch->enable && (s->dma->drqbmp & (1 << ch->sync)))
|
||||||
return;
|
return;
|
||||||
|
|
||||||
if (ch->active) {
|
if (ch->active) {
|
||||||
ch->active = 0;
|
ch->active = 0;
|
||||||
ch->status &= ~SYNC;
|
ch->status &= ~SYNC;
|
||||||
s->run_count --;
|
soc_dma_set_request(ch->dma, 0);
|
||||||
}
|
}
|
||||||
|
|
||||||
if (!s->run_count)
|
|
||||||
qemu_del_timer(s->tm);
|
|
||||||
}
|
}
|
||||||
|
|
||||||
static void omap_dma_enable_channel(struct omap_dma_s *s,
|
static void omap_dma_enable_channel(struct omap_dma_s *s,
|
||||||
@ -238,11 +266,11 @@ static void omap_dma_enable_channel(struct omap_dma_s *s,
|
|||||||
if (!ch->enable) {
|
if (!ch->enable) {
|
||||||
ch->enable = 1;
|
ch->enable = 1;
|
||||||
ch->waiting_end_prog = 0;
|
ch->waiting_end_prog = 0;
|
||||||
omap_dma_channel_load(s, ch);
|
omap_dma_channel_load(ch);
|
||||||
/* TODO: theoretically if ch->sync && ch->prefetch &&
|
/* TODO: theoretically if ch->sync && ch->prefetch &&
|
||||||
* !s->drq[ch->sync], we should also activate and fetch from source
|
* !s->dma->drqbmp[ch->sync], we should also activate and fetch
|
||||||
* and then stall until signalled. */
|
* from source and then stall until signalled. */
|
||||||
if ((!ch->sync) || (s->drq & (1 << ch->sync)))
|
if ((!ch->sync) || (s->dma->drqbmp & (1 << ch->sync)))
|
||||||
omap_dma_activate_channel(s, ch);
|
omap_dma_activate_channel(s, ch);
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
@ -338,140 +366,319 @@ static void omap_dma_process_request(struct omap_dma_s *s, int request)
|
|||||||
omap_dma_interrupts_update(s);
|
omap_dma_interrupts_update(s);
|
||||||
}
|
}
|
||||||
|
|
||||||
static void omap_dma_channel_run(struct omap_dma_s *s)
|
static void omap_dma_transfer_generic(struct soc_dma_ch_s *dma)
|
||||||
{
|
{
|
||||||
int n = s->chans;
|
|
||||||
uint16_t status;
|
|
||||||
uint8_t value[4];
|
uint8_t value[4];
|
||||||
struct omap_dma_port_if_s *src_p, *dest_p;
|
struct omap_dma_channel_s *ch = dma->opaque;
|
||||||
struct omap_dma_reg_set_s *a;
|
struct omap_dma_reg_set_s *a = &ch->active_set;
|
||||||
struct omap_dma_channel_s *ch;
|
int bytes = dma->bytes;
|
||||||
|
#ifdef MULTI_REQ
|
||||||
for (ch = s->ch; n; n --, ch ++) {
|
uint16_t status = ch->status;
|
||||||
if (!ch->active)
|
|
||||||
continue;
|
|
||||||
|
|
||||||
a = &ch->active_set;
|
|
||||||
|
|
||||||
src_p = &s->mpu->port[ch->port[0]];
|
|
||||||
dest_p = &s->mpu->port[ch->port[1]];
|
|
||||||
if ((!ch->constant_fill && !src_p->addr_valid(s->mpu, a->src)) ||
|
|
||||||
(!dest_p->addr_valid(s->mpu, a->dest))) {
|
|
||||||
#if 0
|
|
||||||
/* Bus time-out */
|
|
||||||
if (ch->interrupts & TIMEOUT_INTR)
|
|
||||||
ch->status |= TIMEOUT_INTR;
|
|
||||||
omap_dma_deactivate_channel(s, ch);
|
|
||||||
continue;
|
|
||||||
#endif
|
#endif
|
||||||
printf("%s: Bus time-out in DMA%i operation\n",
|
|
||||||
__FUNCTION__, s->chans - n);
|
do {
|
||||||
|
/* Transfer a single element */
|
||||||
|
/* FIXME: check the endianness */
|
||||||
|
if (!ch->constant_fill)
|
||||||
|
cpu_physical_memory_read(a->src, value, ch->data_type);
|
||||||
|
else
|
||||||
|
*(uint32_t *) value = ch->color;
|
||||||
|
|
||||||
|
if (!ch->transparent_copy || *(uint32_t *) value != ch->color)
|
||||||
|
cpu_physical_memory_write(a->dest, value, ch->data_type);
|
||||||
|
|
||||||
|
a->src += a->elem_delta[0];
|
||||||
|
a->dest += a->elem_delta[1];
|
||||||
|
a->element ++;
|
||||||
|
|
||||||
|
#ifndef MULTI_REQ
|
||||||
|
if (a->element == a->elements) {
|
||||||
|
/* End of Frame */
|
||||||
|
a->element = 0;
|
||||||
|
a->src += a->frame_delta[0];
|
||||||
|
a->dest += a->frame_delta[1];
|
||||||
|
a->frame ++;
|
||||||
|
|
||||||
|
/* If the channel is async, update cpc */
|
||||||
|
if (!ch->sync)
|
||||||
|
ch->cpc = a->dest & 0xffff;
|
||||||
|
}
|
||||||
|
} while ((bytes -= ch->data_type));
|
||||||
|
#else
|
||||||
|
/* If the channel is element synchronized, deactivate it */
|
||||||
|
if (ch->sync && !ch->fs && !ch->bs)
|
||||||
|
omap_dma_deactivate_channel(s, ch);
|
||||||
|
|
||||||
|
/* If it is the last frame, set the LAST_FRAME interrupt */
|
||||||
|
if (a->element == 1 && a->frame == a->frames - 1)
|
||||||
|
if (ch->interrupts & LAST_FRAME_INTR)
|
||||||
|
ch->status |= LAST_FRAME_INTR;
|
||||||
|
|
||||||
|
/* If the half of the frame was reached, set the HALF_FRAME
|
||||||
|
interrupt */
|
||||||
|
if (a->element == (a->elements >> 1))
|
||||||
|
if (ch->interrupts & HALF_FRAME_INTR)
|
||||||
|
ch->status |= HALF_FRAME_INTR;
|
||||||
|
|
||||||
|
if (ch->fs && ch->bs) {
|
||||||
|
a->pck_element ++;
|
||||||
|
/* Check if a full packet has beed transferred. */
|
||||||
|
if (a->pck_element == a->pck_elements) {
|
||||||
|
a->pck_element = 0;
|
||||||
|
|
||||||
|
/* Set the END_PKT interrupt */
|
||||||
|
if ((ch->interrupts & END_PKT_INTR) && !ch->src_sync)
|
||||||
|
ch->status |= END_PKT_INTR;
|
||||||
|
|
||||||
|
/* If the channel is packet-synchronized, deactivate it */
|
||||||
|
if (ch->sync)
|
||||||
|
omap_dma_deactivate_channel(s, ch);
|
||||||
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
status = ch->status;
|
if (a->element == a->elements) {
|
||||||
while (status == ch->status && ch->active) {
|
/* End of Frame */
|
||||||
/* Transfer a single element */
|
a->element = 0;
|
||||||
/* FIXME: check the endianness */
|
a->src += a->frame_delta[0];
|
||||||
if (!ch->constant_fill)
|
a->dest += a->frame_delta[1];
|
||||||
cpu_physical_memory_read(a->src, value, ch->data_type);
|
a->frame ++;
|
||||||
else
|
|
||||||
*(uint32_t *) value = ch->color;
|
|
||||||
|
|
||||||
if (!ch->transparent_copy ||
|
/* If the channel is frame synchronized, deactivate it */
|
||||||
*(uint32_t *) value != ch->color)
|
if (ch->sync && ch->fs && !ch->bs)
|
||||||
cpu_physical_memory_write(a->dest, value, ch->data_type);
|
|
||||||
|
|
||||||
a->src += a->elem_delta[0];
|
|
||||||
a->dest += a->elem_delta[1];
|
|
||||||
a->element ++;
|
|
||||||
|
|
||||||
/* If the channel is element synchronized, deactivate it */
|
|
||||||
if (ch->sync && !ch->fs && !ch->bs)
|
|
||||||
omap_dma_deactivate_channel(s, ch);
|
omap_dma_deactivate_channel(s, ch);
|
||||||
|
|
||||||
/* If it is the last frame, set the LAST_FRAME interrupt */
|
/* If the channel is async, update cpc */
|
||||||
if (a->element == 1 && a->frame == a->frames - 1)
|
if (!ch->sync)
|
||||||
if (ch->interrupts & LAST_FRAME_INTR)
|
ch->cpc = a->dest & 0xffff;
|
||||||
ch->status |= LAST_FRAME_INTR;
|
|
||||||
|
|
||||||
/* If the half of the frame was reached, set the HALF_FRAME
|
/* Set the END_FRAME interrupt */
|
||||||
interrupt */
|
if (ch->interrupts & END_FRAME_INTR)
|
||||||
if (a->element == (a->elements >> 1))
|
ch->status |= END_FRAME_INTR;
|
||||||
if (ch->interrupts & HALF_FRAME_INTR)
|
|
||||||
ch->status |= HALF_FRAME_INTR;
|
|
||||||
|
|
||||||
if (ch->fs && ch->bs) {
|
if (a->frame == a->frames) {
|
||||||
a->pck_element ++;
|
/* End of Block */
|
||||||
/* Check if a full packet has beed transferred. */
|
/* Disable the channel */
|
||||||
if (a->pck_element == a->pck_elements) {
|
|
||||||
a->pck_element = 0;
|
|
||||||
|
|
||||||
/* Set the END_PKT interrupt */
|
if (ch->omap_3_1_compatible_disable) {
|
||||||
if ((ch->interrupts & END_PKT_INTR) && !ch->src_sync)
|
omap_dma_disable_channel(s, ch);
|
||||||
ch->status |= END_PKT_INTR;
|
if (ch->link_enabled)
|
||||||
|
omap_dma_enable_channel(s,
|
||||||
/* If the channel is packet-synchronized, deactivate it */
|
&s->ch[ch->link_next_ch]);
|
||||||
if (ch->sync)
|
} else {
|
||||||
omap_dma_deactivate_channel(s, ch);
|
if (!ch->auto_init)
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
if (a->element == a->elements) {
|
|
||||||
/* End of Frame */
|
|
||||||
a->element = 0;
|
|
||||||
a->src += a->frame_delta[0];
|
|
||||||
a->dest += a->frame_delta[1];
|
|
||||||
a->frame ++;
|
|
||||||
|
|
||||||
/* If the channel is frame synchronized, deactivate it */
|
|
||||||
if (ch->sync && ch->fs && !ch->bs)
|
|
||||||
omap_dma_deactivate_channel(s, ch);
|
|
||||||
|
|
||||||
/* If the channel is async, update cpc */
|
|
||||||
if (!ch->sync)
|
|
||||||
ch->cpc = a->dest & 0xffff;
|
|
||||||
|
|
||||||
/* Set the END_FRAME interrupt */
|
|
||||||
if (ch->interrupts & END_FRAME_INTR)
|
|
||||||
ch->status |= END_FRAME_INTR;
|
|
||||||
|
|
||||||
if (a->frame == a->frames) {
|
|
||||||
/* End of Block */
|
|
||||||
/* Disable the channel */
|
|
||||||
|
|
||||||
if (ch->omap_3_1_compatible_disable) {
|
|
||||||
omap_dma_disable_channel(s, ch);
|
omap_dma_disable_channel(s, ch);
|
||||||
if (ch->link_enabled)
|
else if (ch->repeat || ch->end_prog)
|
||||||
omap_dma_enable_channel(s,
|
omap_dma_channel_load(ch);
|
||||||
&s->ch[ch->link_next_ch]);
|
else {
|
||||||
} else {
|
ch->waiting_end_prog = 1;
|
||||||
if (!ch->auto_init)
|
omap_dma_deactivate_channel(s, ch);
|
||||||
omap_dma_disable_channel(s, ch);
|
|
||||||
else if (ch->repeat || ch->end_prog)
|
|
||||||
omap_dma_channel_load(s, ch);
|
|
||||||
else {
|
|
||||||
ch->waiting_end_prog = 1;
|
|
||||||
omap_dma_deactivate_channel(s, ch);
|
|
||||||
}
|
|
||||||
}
|
}
|
||||||
|
|
||||||
if (ch->interrupts & END_BLOCK_INTR)
|
|
||||||
ch->status |= END_BLOCK_INTR;
|
|
||||||
}
|
}
|
||||||
|
|
||||||
|
if (ch->interrupts & END_BLOCK_INTR)
|
||||||
|
ch->status |= END_BLOCK_INTR;
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
} while (status == ch->status && ch->active);
|
||||||
|
|
||||||
|
omap_dma_interrupts_update(s);
|
||||||
|
#endif
|
||||||
|
}
|
||||||
|
|
||||||
|
enum {
|
||||||
|
omap_dma_intr_element_sync,
|
||||||
|
omap_dma_intr_last_frame,
|
||||||
|
omap_dma_intr_half_frame,
|
||||||
|
omap_dma_intr_frame,
|
||||||
|
omap_dma_intr_frame_sync,
|
||||||
|
omap_dma_intr_packet,
|
||||||
|
omap_dma_intr_packet_sync,
|
||||||
|
omap_dma_intr_block,
|
||||||
|
__omap_dma_intr_last,
|
||||||
|
};
|
||||||
|
|
||||||
|
static void omap_dma_transfer_setup(struct soc_dma_ch_s *dma)
|
||||||
|
{
|
||||||
|
struct omap_dma_port_if_s *src_p, *dest_p;
|
||||||
|
struct omap_dma_reg_set_s *a;
|
||||||
|
struct omap_dma_channel_s *ch = dma->opaque;
|
||||||
|
struct omap_dma_s *s = dma->dma->opaque;
|
||||||
|
int frames, min_elems, elements[__omap_dma_intr_last];
|
||||||
|
|
||||||
|
a = &ch->active_set;
|
||||||
|
|
||||||
|
src_p = &s->mpu->port[ch->port[0]];
|
||||||
|
dest_p = &s->mpu->port[ch->port[1]];
|
||||||
|
if ((!ch->constant_fill && !src_p->addr_valid(s->mpu, a->src)) ||
|
||||||
|
(!dest_p->addr_valid(s->mpu, a->dest))) {
|
||||||
|
#if 0
|
||||||
|
/* Bus time-out */
|
||||||
|
if (ch->interrupts & TIMEOUT_INTR)
|
||||||
|
ch->status |= TIMEOUT_INTR;
|
||||||
|
omap_dma_deactivate_channel(s, ch);
|
||||||
|
continue;
|
||||||
|
#endif
|
||||||
|
printf("%s: Bus time-out in DMA%i operation\n",
|
||||||
|
__FUNCTION__, dma->num);
|
||||||
|
}
|
||||||
|
|
||||||
|
min_elems = INT_MAX;
|
||||||
|
|
||||||
|
/* Check all the conditions that terminate the transfer starting
|
||||||
|
* with those that can occur the soonest. */
|
||||||
|
#define INTR_CHECK(cond, id, nelements) \
|
||||||
|
if (cond) { \
|
||||||
|
elements[id] = nelements; \
|
||||||
|
if (elements[id] < min_elems) \
|
||||||
|
min_elems = elements[id]; \
|
||||||
|
} else \
|
||||||
|
elements[id] = INT_MAX;
|
||||||
|
|
||||||
|
/* Elements */
|
||||||
|
INTR_CHECK(
|
||||||
|
ch->sync && !ch->fs && !ch->bs,
|
||||||
|
omap_dma_intr_element_sync,
|
||||||
|
1)
|
||||||
|
|
||||||
|
/* Frames */
|
||||||
|
/* TODO: for transfers where entire frames can be read and written
|
||||||
|
* using memcpy() but a->frame_delta is non-zero, try to still do
|
||||||
|
* transfers using soc_dma but limit min_elems to a->elements - ...
|
||||||
|
* See also the TODO in omap_dma_channel_load. */
|
||||||
|
INTR_CHECK(
|
||||||
|
(ch->interrupts & LAST_FRAME_INTR) &&
|
||||||
|
((a->frame < a->frames - 1) || !a->element),
|
||||||
|
omap_dma_intr_last_frame,
|
||||||
|
(a->frames - a->frame - 2) * a->elements +
|
||||||
|
(a->elements - a->element + 1))
|
||||||
|
INTR_CHECK(
|
||||||
|
ch->interrupts & HALF_FRAME_INTR,
|
||||||
|
omap_dma_intr_half_frame,
|
||||||
|
(a->elements >> 1) +
|
||||||
|
(a->element >= (a->elements >> 1) ? a->elements : 0) -
|
||||||
|
a->element)
|
||||||
|
INTR_CHECK(
|
||||||
|
ch->sync && ch->fs && (ch->interrupts & END_FRAME_INTR),
|
||||||
|
omap_dma_intr_frame,
|
||||||
|
a->elements - a->element)
|
||||||
|
INTR_CHECK(
|
||||||
|
ch->sync && ch->fs && !ch->bs,
|
||||||
|
omap_dma_intr_frame_sync,
|
||||||
|
a->elements - a->element)
|
||||||
|
|
||||||
|
/* Packets */
|
||||||
|
INTR_CHECK(
|
||||||
|
ch->fs && ch->bs &&
|
||||||
|
(ch->interrupts & END_PKT_INTR) && !ch->src_sync,
|
||||||
|
omap_dma_intr_packet,
|
||||||
|
a->pck_elements - a->pck_element)
|
||||||
|
INTR_CHECK(
|
||||||
|
ch->fs && ch->bs && ch->sync,
|
||||||
|
omap_dma_intr_packet_sync,
|
||||||
|
a->pck_elements - a->pck_element)
|
||||||
|
|
||||||
|
/* Blocks */
|
||||||
|
INTR_CHECK(
|
||||||
|
1,
|
||||||
|
omap_dma_intr_block,
|
||||||
|
(a->frames - a->frame - 1) * a->elements +
|
||||||
|
(a->elements - a->element))
|
||||||
|
|
||||||
|
dma->bytes = min_elems * ch->data_type;
|
||||||
|
|
||||||
|
/* Set appropriate interrupts and/or deactivate channels */
|
||||||
|
|
||||||
|
#ifdef MULTI_REQ
|
||||||
|
/* TODO: should all of this only be done if dma->update, and otherwise
|
||||||
|
* inside omap_dma_transfer_generic below - check what's faster. */
|
||||||
|
if (dma->update) {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* If the channel is element synchronized, deactivate it */
|
||||||
|
if (min_elems == elements[omap_dma_intr_element_sync])
|
||||||
|
omap_dma_deactivate_channel(s, ch);
|
||||||
|
|
||||||
|
/* If it is the last frame, set the LAST_FRAME interrupt */
|
||||||
|
if (min_elems == elements[omap_dma_intr_last_frame])
|
||||||
|
ch->status |= LAST_FRAME_INTR;
|
||||||
|
|
||||||
|
/* If exactly half of the frame was reached, set the HALF_FRAME
|
||||||
|
interrupt */
|
||||||
|
if (min_elems == elements[omap_dma_intr_half_frame])
|
||||||
|
ch->status |= HALF_FRAME_INTR;
|
||||||
|
|
||||||
|
/* If a full packet has been transferred, set the END_PKT interrupt */
|
||||||
|
if (min_elems == elements[omap_dma_intr_packet])
|
||||||
|
ch->status |= END_PKT_INTR;
|
||||||
|
|
||||||
|
/* If the channel is packet-synchronized, deactivate it */
|
||||||
|
if (min_elems == elements[omap_dma_intr_packet_sync])
|
||||||
|
omap_dma_deactivate_channel(s, ch);
|
||||||
|
|
||||||
|
/* If the channel is frame synchronized, deactivate it */
|
||||||
|
if (min_elems == elements[omap_dma_intr_frame_sync])
|
||||||
|
omap_dma_deactivate_channel(s, ch);
|
||||||
|
|
||||||
|
/* Set the END_FRAME interrupt */
|
||||||
|
if (min_elems == elements[omap_dma_intr_frame])
|
||||||
|
ch->status |= END_FRAME_INTR;
|
||||||
|
|
||||||
|
if (min_elems == elements[omap_dma_intr_block]) {
|
||||||
|
/* End of Block */
|
||||||
|
/* Disable the channel */
|
||||||
|
|
||||||
|
if (ch->omap_3_1_compatible_disable) {
|
||||||
|
omap_dma_disable_channel(s, ch);
|
||||||
|
if (ch->link_enabled)
|
||||||
|
omap_dma_enable_channel(s, &s->ch[ch->link_next_ch]);
|
||||||
|
} else {
|
||||||
|
if (!ch->auto_init)
|
||||||
|
omap_dma_disable_channel(s, ch);
|
||||||
|
else if (ch->repeat || ch->end_prog)
|
||||||
|
omap_dma_channel_load(ch);
|
||||||
|
else {
|
||||||
|
ch->waiting_end_prog = 1;
|
||||||
|
omap_dma_deactivate_channel(s, ch);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
if (ch->interrupts & END_BLOCK_INTR)
|
||||||
|
ch->status |= END_BLOCK_INTR;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Update packet number */
|
||||||
|
if (ch->fs && ch->bs) {
|
||||||
|
a->pck_element += min_elems;
|
||||||
|
a->pck_element %= a->pck_elements;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* TODO: check if we really need to update anything here or perhaps we
|
||||||
|
* can skip part of this. */
|
||||||
|
#ifndef MULTI_REQ
|
||||||
|
if (dma->update) {
|
||||||
|
#endif
|
||||||
|
a->element += min_elems;
|
||||||
|
|
||||||
|
frames = a->element / a->elements;
|
||||||
|
a->element = a->element % a->elements;
|
||||||
|
a->frame += frames;
|
||||||
|
a->src += min_elems * a->elem_delta[0] + frames * a->frame_delta[0];
|
||||||
|
a->dest += min_elems * a->elem_delta[1] + frames * a->frame_delta[1];
|
||||||
|
|
||||||
|
/* If the channel is async, update cpc */
|
||||||
|
if (!ch->sync && frames)
|
||||||
|
ch->cpc = a->dest & 0xffff;
|
||||||
}
|
}
|
||||||
|
|
||||||
omap_dma_interrupts_update(s);
|
omap_dma_interrupts_update(s);
|
||||||
if (s->run_count && s->delay)
|
|
||||||
qemu_mod_timer(s->tm, qemu_get_clock(vm_clock) + s->delay);
|
|
||||||
}
|
}
|
||||||
|
|
||||||
void omap_dma_reset(struct omap_dma_s *s)
|
void omap_dma_reset(struct soc_dma_s *dma)
|
||||||
{
|
{
|
||||||
int i;
|
int i;
|
||||||
|
struct omap_dma_s *s = dma->opaque;
|
||||||
|
|
||||||
qemu_del_timer(s->tm);
|
soc_dma_reset(s->dma);
|
||||||
if (s->model < omap_dma_4)
|
if (s->model < omap_dma_4)
|
||||||
s->gcr = 0x0004;
|
s->gcr = 0x0004;
|
||||||
else
|
else
|
||||||
@ -479,8 +686,6 @@ void omap_dma_reset(struct omap_dma_s *s)
|
|||||||
s->ocp = 0x00000000;
|
s->ocp = 0x00000000;
|
||||||
memset(&s->irqstat, 0, sizeof(s->irqstat));
|
memset(&s->irqstat, 0, sizeof(s->irqstat));
|
||||||
memset(&s->irqen, 0, sizeof(s->irqen));
|
memset(&s->irqen, 0, sizeof(s->irqen));
|
||||||
s->drq = 0x00000000;
|
|
||||||
s->run_count = 0;
|
|
||||||
s->lcd_ch.src = emiff;
|
s->lcd_ch.src = emiff;
|
||||||
s->lcd_ch.condition = 0;
|
s->lcd_ch.condition = 0;
|
||||||
s->lcd_ch.interrupts = 0;
|
s->lcd_ch.interrupts = 0;
|
||||||
@ -1161,7 +1366,7 @@ static int omap_dma_sys_write(struct omap_dma_s *s, int offset, uint16_t value)
|
|||||||
|
|
||||||
case 0x408: /* DMA_GRST */
|
case 0x408: /* DMA_GRST */
|
||||||
if (value & 0x1)
|
if (value & 0x1)
|
||||||
omap_dma_reset(s);
|
omap_dma_reset(s->dma);
|
||||||
break;
|
break;
|
||||||
|
|
||||||
default:
|
default:
|
||||||
@ -1338,27 +1543,25 @@ static void omap_dma_request(void *opaque, int drq, int req)
|
|||||||
struct omap_dma_s *s = (struct omap_dma_s *) opaque;
|
struct omap_dma_s *s = (struct omap_dma_s *) opaque;
|
||||||
/* The request pins are level triggered in QEMU. */
|
/* The request pins are level triggered in QEMU. */
|
||||||
if (req) {
|
if (req) {
|
||||||
if (~s->drq & (1 << drq)) {
|
if (~s->dma->drqbmp & (1 << drq)) {
|
||||||
s->drq |= 1 << drq;
|
s->dma->drqbmp |= 1 << drq;
|
||||||
omap_dma_process_request(s, drq);
|
omap_dma_process_request(s, drq);
|
||||||
}
|
}
|
||||||
} else
|
} else
|
||||||
s->drq &= ~(1 << drq);
|
s->dma->drqbmp &= ~(1 << drq);
|
||||||
}
|
}
|
||||||
|
|
||||||
|
/* XXX: this won't be needed once soc_dma knows about clocks. */
|
||||||
static void omap_dma_clk_update(void *opaque, int line, int on)
|
static void omap_dma_clk_update(void *opaque, int line, int on)
|
||||||
{
|
{
|
||||||
struct omap_dma_s *s = (struct omap_dma_s *) opaque;
|
struct omap_dma_s *s = (struct omap_dma_s *) opaque;
|
||||||
|
int i;
|
||||||
|
|
||||||
if (on) {
|
s->dma->freq = omap_clk_getrate(s->clk);
|
||||||
/* TODO: make a clever calculation */
|
|
||||||
s->delay = ticks_per_sec >> 8;
|
for (i = 0; i < s->chans; i ++)
|
||||||
if (s->run_count)
|
if (s->ch[i].active)
|
||||||
qemu_mod_timer(s->tm, qemu_get_clock(vm_clock) + s->delay);
|
soc_dma_set_request(s->ch[i].dma, on);
|
||||||
} else {
|
|
||||||
s->delay = 0;
|
|
||||||
qemu_del_timer(s->tm);
|
|
||||||
}
|
|
||||||
}
|
}
|
||||||
|
|
||||||
static void omap_dma_setcaps(struct omap_dma_s *s)
|
static void omap_dma_setcaps(struct omap_dma_s *s)
|
||||||
@ -1407,7 +1610,7 @@ static void omap_dma_setcaps(struct omap_dma_s *s)
|
|||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
struct omap_dma_s *omap_dma_init(target_phys_addr_t base, qemu_irq *irqs,
|
struct soc_dma_s *omap_dma_init(target_phys_addr_t base, qemu_irq *irqs,
|
||||||
qemu_irq lcd_irq, struct omap_mpu_state_s *mpu, omap_clk clk,
|
qemu_irq lcd_irq, struct omap_mpu_state_s *mpu, omap_clk clk,
|
||||||
enum omap_dma_model model)
|
enum omap_dma_model model)
|
||||||
{
|
{
|
||||||
@ -1428,24 +1631,37 @@ struct omap_dma_s *omap_dma_init(target_phys_addr_t base, qemu_irq *irqs,
|
|||||||
s->clk = clk;
|
s->clk = clk;
|
||||||
s->lcd_ch.irq = lcd_irq;
|
s->lcd_ch.irq = lcd_irq;
|
||||||
s->lcd_ch.mpu = mpu;
|
s->lcd_ch.mpu = mpu;
|
||||||
omap_dma_setcaps(s);
|
|
||||||
|
s->dma = soc_dma_init((model <= omap_dma_3_1) ? 9 : 16);
|
||||||
|
s->dma->freq = omap_clk_getrate(clk);
|
||||||
|
s->dma->transfer_fn = omap_dma_transfer_generic;
|
||||||
|
s->dma->setup_fn = omap_dma_transfer_setup;
|
||||||
|
s->dma->drq = qemu_allocate_irqs(omap_dma_request, s, 32);
|
||||||
|
s->dma->opaque = s;
|
||||||
|
|
||||||
while (num_irqs --)
|
while (num_irqs --)
|
||||||
s->ch[num_irqs].irq = irqs[num_irqs];
|
s->ch[num_irqs].irq = irqs[num_irqs];
|
||||||
for (i = 0; i < 3; i ++) {
|
for (i = 0; i < 3; i ++) {
|
||||||
s->ch[i].sibling = &s->ch[i + 6];
|
s->ch[i].sibling = &s->ch[i + 6];
|
||||||
s->ch[i + 6].sibling = &s->ch[i];
|
s->ch[i + 6].sibling = &s->ch[i];
|
||||||
}
|
}
|
||||||
s->tm = qemu_new_timer(vm_clock, (QEMUTimerCB *) omap_dma_channel_run, s);
|
for (i = (model <= omap_dma_3_1) ? 8 : 15; i >= 0; i --) {
|
||||||
|
s->ch[i].dma = &s->dma->ch[i];
|
||||||
|
s->dma->ch[i].opaque = &s->ch[i];
|
||||||
|
}
|
||||||
|
|
||||||
|
omap_dma_setcaps(s);
|
||||||
omap_clk_adduser(s->clk, qemu_allocate_irqs(omap_dma_clk_update, s, 1)[0]);
|
omap_clk_adduser(s->clk, qemu_allocate_irqs(omap_dma_clk_update, s, 1)[0]);
|
||||||
mpu->drq = qemu_allocate_irqs(omap_dma_request, s, 32);
|
omap_dma_reset(s->dma);
|
||||||
omap_dma_reset(s);
|
|
||||||
omap_dma_clk_update(s, 0, 1);
|
omap_dma_clk_update(s, 0, 1);
|
||||||
|
|
||||||
iomemtype = cpu_register_io_memory(0, omap_dma_readfn,
|
iomemtype = cpu_register_io_memory(0, omap_dma_readfn,
|
||||||
omap_dma_writefn, s);
|
omap_dma_writefn, s);
|
||||||
cpu_register_physical_memory(s->base, memsize, iomemtype);
|
cpu_register_physical_memory(s->base, memsize, iomemtype);
|
||||||
|
|
||||||
return s;
|
mpu->drq = s->dma->drq;
|
||||||
|
|
||||||
|
return s->dma;
|
||||||
}
|
}
|
||||||
|
|
||||||
static void omap_dma_interrupts_4_update(struct omap_dma_s *s)
|
static void omap_dma_interrupts_4_update(struct omap_dma_s *s)
|
||||||
@ -1646,7 +1862,7 @@ static void omap_dma4_write(void *opaque, target_phys_addr_t addr,
|
|||||||
|
|
||||||
case 0x2c: /* DMA4_OCP_SYSCONFIG */
|
case 0x2c: /* DMA4_OCP_SYSCONFIG */
|
||||||
if (value & 2) /* SOFTRESET */
|
if (value & 2) /* SOFTRESET */
|
||||||
omap_dma_reset(s);
|
omap_dma_reset(s->dma);
|
||||||
s->ocp = value & 0x3321;
|
s->ocp = value & 0x3321;
|
||||||
if (((s->ocp >> 12) & 3) == 3) /* MIDLEMODE */
|
if (((s->ocp >> 12) & 3) == 3) /* MIDLEMODE */
|
||||||
fprintf(stderr, "%s: invalid DMA power mode\n", __FUNCTION__);
|
fprintf(stderr, "%s: invalid DMA power mode\n", __FUNCTION__);
|
||||||
@ -1728,7 +1944,7 @@ static void omap_dma4_write(void *opaque, target_phys_addr_t addr,
|
|||||||
ch->endian[1] =(value >> 19) & 1;
|
ch->endian[1] =(value >> 19) & 1;
|
||||||
ch->endian_lock[1] =(value >> 18) & 1;
|
ch->endian_lock[1] =(value >> 18) & 1;
|
||||||
if (ch->endian[0] != ch->endian[1])
|
if (ch->endian[0] != ch->endian[1])
|
||||||
fprintf(stderr, "%s: DMA endianned conversion enable attempt\n",
|
fprintf(stderr, "%s: DMA endiannes conversion enable attempt\n",
|
||||||
__FUNCTION__);
|
__FUNCTION__);
|
||||||
ch->write_mode = (value >> 16) & 3;
|
ch->write_mode = (value >> 16) & 3;
|
||||||
ch->burst[1] = (value & 0xc000) >> 14;
|
ch->burst[1] = (value & 0xc000) >> 14;
|
||||||
@ -1746,35 +1962,43 @@ static void omap_dma4_write(void *opaque, target_phys_addr_t addr,
|
|||||||
break;
|
break;
|
||||||
|
|
||||||
case 0x14: /* DMA4_CEN */
|
case 0x14: /* DMA4_CEN */
|
||||||
|
ch->set_update = 1;
|
||||||
ch->elements = value & 0xffffff;
|
ch->elements = value & 0xffffff;
|
||||||
break;
|
break;
|
||||||
|
|
||||||
case 0x18: /* DMA4_CFN */
|
case 0x18: /* DMA4_CFN */
|
||||||
ch->frames = value & 0xffff;
|
ch->frames = value & 0xffff;
|
||||||
|
ch->set_update = 1;
|
||||||
break;
|
break;
|
||||||
|
|
||||||
case 0x1c: /* DMA4_CSSA */
|
case 0x1c: /* DMA4_CSSA */
|
||||||
ch->addr[0] = (target_phys_addr_t) (uint32_t) value;
|
ch->addr[0] = (target_phys_addr_t) (uint32_t) value;
|
||||||
|
ch->set_update = 1;
|
||||||
break;
|
break;
|
||||||
|
|
||||||
case 0x20: /* DMA4_CDSA */
|
case 0x20: /* DMA4_CDSA */
|
||||||
ch->addr[1] = (target_phys_addr_t) (uint32_t) value;
|
ch->addr[1] = (target_phys_addr_t) (uint32_t) value;
|
||||||
|
ch->set_update = 1;
|
||||||
break;
|
break;
|
||||||
|
|
||||||
case 0x24: /* DMA4_CSEI */
|
case 0x24: /* DMA4_CSEI */
|
||||||
ch->element_index[0] = (int16_t) value;
|
ch->element_index[0] = (int16_t) value;
|
||||||
|
ch->set_update = 1;
|
||||||
break;
|
break;
|
||||||
|
|
||||||
case 0x28: /* DMA4_CSFI */
|
case 0x28: /* DMA4_CSFI */
|
||||||
ch->frame_index[0] = (int32_t) value;
|
ch->frame_index[0] = (int32_t) value;
|
||||||
|
ch->set_update = 1;
|
||||||
break;
|
break;
|
||||||
|
|
||||||
case 0x2c: /* DMA4_CDEI */
|
case 0x2c: /* DMA4_CDEI */
|
||||||
ch->element_index[1] = (int16_t) value;
|
ch->element_index[1] = (int16_t) value;
|
||||||
|
ch->set_update = 1;
|
||||||
break;
|
break;
|
||||||
|
|
||||||
case 0x30: /* DMA4_CDFI */
|
case 0x30: /* DMA4_CDFI */
|
||||||
ch->frame_index[1] = (int32_t) value;
|
ch->frame_index[1] = (int32_t) value;
|
||||||
|
ch->set_update = 1;
|
||||||
break;
|
break;
|
||||||
|
|
||||||
case 0x44: /* DMA4_COLOR */
|
case 0x44: /* DMA4_COLOR */
|
||||||
@ -1806,11 +2030,11 @@ static CPUWriteMemoryFunc *omap_dma4_writefn[] = {
|
|||||||
omap_dma4_write,
|
omap_dma4_write,
|
||||||
};
|
};
|
||||||
|
|
||||||
struct omap_dma_s *omap_dma4_init(target_phys_addr_t base, qemu_irq *irqs,
|
struct soc_dma_s *omap_dma4_init(target_phys_addr_t base, qemu_irq *irqs,
|
||||||
struct omap_mpu_state_s *mpu, int fifo,
|
struct omap_mpu_state_s *mpu, int fifo,
|
||||||
int chans, omap_clk iclk, omap_clk fclk)
|
int chans, omap_clk iclk, omap_clk fclk)
|
||||||
{
|
{
|
||||||
int iomemtype;
|
int iomemtype, i;
|
||||||
struct omap_dma_s *s = (struct omap_dma_s *)
|
struct omap_dma_s *s = (struct omap_dma_s *)
|
||||||
qemu_mallocz(sizeof(struct omap_dma_s));
|
qemu_mallocz(sizeof(struct omap_dma_s));
|
||||||
|
|
||||||
@ -1819,23 +2043,38 @@ struct omap_dma_s *omap_dma4_init(target_phys_addr_t base, qemu_irq *irqs,
|
|||||||
s->chans = chans;
|
s->chans = chans;
|
||||||
s->mpu = mpu;
|
s->mpu = mpu;
|
||||||
s->clk = fclk;
|
s->clk = fclk;
|
||||||
|
|
||||||
|
s->dma = soc_dma_init(s->chans);
|
||||||
|
s->dma->freq = omap_clk_getrate(fclk);
|
||||||
|
s->dma->transfer_fn = omap_dma_transfer_generic;
|
||||||
|
s->dma->setup_fn = omap_dma_transfer_setup;
|
||||||
|
s->dma->drq = qemu_allocate_irqs(omap_dma_request, s, 64);
|
||||||
|
s->dma->opaque = s;
|
||||||
|
for (i = 0; i < s->chans; i ++) {
|
||||||
|
s->ch[i].dma = &s->dma->ch[i];
|
||||||
|
s->dma->ch[i].opaque = &s->ch[i];
|
||||||
|
}
|
||||||
|
|
||||||
memcpy(&s->irq, irqs, sizeof(s->irq));
|
memcpy(&s->irq, irqs, sizeof(s->irq));
|
||||||
s->intr_update = omap_dma_interrupts_4_update;
|
s->intr_update = omap_dma_interrupts_4_update;
|
||||||
|
|
||||||
omap_dma_setcaps(s);
|
omap_dma_setcaps(s);
|
||||||
s->tm = qemu_new_timer(vm_clock, (QEMUTimerCB *) omap_dma_channel_run, s);
|
|
||||||
omap_clk_adduser(s->clk, qemu_allocate_irqs(omap_dma_clk_update, s, 1)[0]);
|
omap_clk_adduser(s->clk, qemu_allocate_irqs(omap_dma_clk_update, s, 1)[0]);
|
||||||
mpu->drq = qemu_allocate_irqs(omap_dma_request, s, 64);
|
omap_dma_reset(s->dma);
|
||||||
omap_dma_reset(s);
|
omap_dma_clk_update(s, 0, !!s->dma->freq);
|
||||||
omap_dma_clk_update(s, 0, 1);
|
|
||||||
|
|
||||||
iomemtype = cpu_register_io_memory(0, omap_dma4_readfn,
|
iomemtype = cpu_register_io_memory(0, omap_dma4_readfn,
|
||||||
omap_dma4_writefn, s);
|
omap_dma4_writefn, s);
|
||||||
cpu_register_physical_memory(s->base, 0x1000, iomemtype);
|
cpu_register_physical_memory(s->base, 0x1000, iomemtype);
|
||||||
|
|
||||||
return s;
|
mpu->drq = s->dma->drq;
|
||||||
|
|
||||||
|
return s->dma;
|
||||||
}
|
}
|
||||||
|
|
||||||
struct omap_dma_lcd_channel_s *omap_dma_get_lcdch(struct omap_dma_s *s)
|
struct omap_dma_lcd_channel_s *omap_dma_get_lcdch(struct soc_dma_s *dma)
|
||||||
{
|
{
|
||||||
|
struct omap_dma_s *s = dma->opaque;
|
||||||
|
|
||||||
return &s->lcd_ch;
|
return &s->lcd_ch;
|
||||||
}
|
}
|
||||||
|
366
hw/soc_dma.c
Normal file
366
hw/soc_dma.c
Normal file
@ -0,0 +1,366 @@
|
|||||||
|
/*
|
||||||
|
* On-chip DMA controller framework.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2008 Nokia Corporation
|
||||||
|
* Written by Andrzej Zaborowski <andrew@openedhand.com>
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or
|
||||||
|
* modify it under the terms of the GNU General Public License as
|
||||||
|
* published by the Free Software Foundation; either version 2 or
|
||||||
|
* (at your option) version 3 of the License.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program; if not, write to the Free Software
|
||||||
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||||
|
* MA 02111-1307 USA
|
||||||
|
*/
|
||||||
|
#include "qemu-common.h"
|
||||||
|
#include "qemu-timer.h"
|
||||||
|
#include "soc_dma.h"
|
||||||
|
|
||||||
|
void transfer_mem2mem(struct soc_dma_ch_s *ch)
|
||||||
|
{
|
||||||
|
memcpy(ch->paddr[0], ch->paddr[1], ch->bytes);
|
||||||
|
ch->paddr[0] += ch->bytes;
|
||||||
|
ch->paddr[1] += ch->bytes;
|
||||||
|
}
|
||||||
|
|
||||||
|
void transfer_mem2fifo(struct soc_dma_ch_s *ch)
|
||||||
|
{
|
||||||
|
ch->io_fn[1](ch->io_opaque[1], ch->paddr[0], ch->bytes);
|
||||||
|
ch->paddr[0] += ch->bytes;
|
||||||
|
}
|
||||||
|
|
||||||
|
void transfer_fifo2mem(struct soc_dma_ch_s *ch)
|
||||||
|
{
|
||||||
|
ch->io_fn[0](ch->io_opaque[0], ch->paddr[1], ch->bytes);
|
||||||
|
ch->paddr[1] += ch->bytes;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* This is further optimisable but isn't very important because often
|
||||||
|
* DMA peripherals forbid this kind of transfers and even when they don't,
|
||||||
|
* oprating systems may not need to use them. */
|
||||||
|
static void *fifo_buf;
|
||||||
|
static int fifo_size;
|
||||||
|
void transfer_fifo2fifo(struct soc_dma_ch_s *ch)
|
||||||
|
{
|
||||||
|
if (ch->bytes < fifo_size)
|
||||||
|
fifo_buf = realloc(fifo_buf, fifo_size = ch->bytes);
|
||||||
|
|
||||||
|
/* Implement as transfer_fifo2linear + transfer_linear2fifo. */
|
||||||
|
ch->io_fn[0](ch->io_opaque[0], fifo_buf, ch->bytes);
|
||||||
|
ch->io_fn[1](ch->io_opaque[1], fifo_buf, ch->bytes);
|
||||||
|
}
|
||||||
|
|
||||||
|
struct dma_s {
|
||||||
|
struct soc_dma_s soc;
|
||||||
|
int chnum;
|
||||||
|
uint64_t ch_enable_mask;
|
||||||
|
int64_t channel_freq;
|
||||||
|
int enabled_count;
|
||||||
|
|
||||||
|
struct memmap_entry_s {
|
||||||
|
enum soc_dma_port_type type;
|
||||||
|
target_phys_addr_t addr;
|
||||||
|
union {
|
||||||
|
struct {
|
||||||
|
void *opaque;
|
||||||
|
soc_dma_io_t fn;
|
||||||
|
int out;
|
||||||
|
} fifo;
|
||||||
|
struct {
|
||||||
|
void *base;
|
||||||
|
size_t size;
|
||||||
|
} mem;
|
||||||
|
} u;
|
||||||
|
} *memmap;
|
||||||
|
int memmap_size;
|
||||||
|
|
||||||
|
struct soc_dma_ch_s ch[0];
|
||||||
|
};
|
||||||
|
|
||||||
|
static void soc_dma_ch_schedule(struct soc_dma_ch_s *ch, int delay_bytes)
|
||||||
|
{
|
||||||
|
int64_t now = qemu_get_clock(vm_clock);
|
||||||
|
struct dma_s *dma = (struct dma_s *) ch->dma;
|
||||||
|
|
||||||
|
qemu_mod_timer(ch->timer, now + delay_bytes / dma->channel_freq);
|
||||||
|
}
|
||||||
|
|
||||||
|
static void soc_dma_ch_run(void *opaque)
|
||||||
|
{
|
||||||
|
struct soc_dma_ch_s *ch = (struct soc_dma_ch_s *) opaque;
|
||||||
|
|
||||||
|
ch->running = 1;
|
||||||
|
ch->dma->setup_fn(ch);
|
||||||
|
ch->transfer_fn(ch);
|
||||||
|
ch->running = 0;
|
||||||
|
|
||||||
|
if (ch->enable)
|
||||||
|
soc_dma_ch_schedule(ch, ch->bytes);
|
||||||
|
ch->bytes = 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static inline struct memmap_entry_s *soc_dma_lookup(struct dma_s *dma,
|
||||||
|
target_phys_addr_t addr)
|
||||||
|
{
|
||||||
|
struct memmap_entry_s *lo;
|
||||||
|
int hi;
|
||||||
|
|
||||||
|
lo = dma->memmap;
|
||||||
|
hi = dma->memmap_size;
|
||||||
|
|
||||||
|
while (hi > 1) {
|
||||||
|
hi /= 2;
|
||||||
|
if (lo[hi].addr <= addr)
|
||||||
|
lo += hi;
|
||||||
|
}
|
||||||
|
|
||||||
|
return lo;
|
||||||
|
}
|
||||||
|
|
||||||
|
static inline enum soc_dma_port_type soc_dma_ch_update_type(
|
||||||
|
struct soc_dma_ch_s *ch, int port)
|
||||||
|
{
|
||||||
|
struct dma_s *dma = (struct dma_s *) ch->dma;
|
||||||
|
struct memmap_entry_s *entry = soc_dma_lookup(dma, ch->vaddr[port]);
|
||||||
|
|
||||||
|
if (entry->type == soc_dma_port_fifo) {
|
||||||
|
while (entry < dma->memmap + dma->memmap_size &&
|
||||||
|
entry->u.fifo.out != port)
|
||||||
|
entry ++;
|
||||||
|
if (entry->addr != ch->vaddr[port] || entry->u.fifo.out != port)
|
||||||
|
return soc_dma_port_other;
|
||||||
|
|
||||||
|
if (ch->type[port] != soc_dma_access_const)
|
||||||
|
return soc_dma_port_other;
|
||||||
|
|
||||||
|
ch->io_fn[port] = entry->u.fifo.fn;
|
||||||
|
ch->io_opaque[port] = entry->u.fifo.opaque;
|
||||||
|
return soc_dma_port_fifo;
|
||||||
|
} else if (entry->type == soc_dma_port_mem) {
|
||||||
|
if (entry->addr > ch->vaddr[port] ||
|
||||||
|
entry->addr + entry->u.mem.size <= ch->vaddr[port])
|
||||||
|
return soc_dma_port_other;
|
||||||
|
|
||||||
|
/* TODO: support constant memory address for source port as used for
|
||||||
|
* drawing solid rectangles by PalmOS(R). */
|
||||||
|
if (ch->type[port] != soc_dma_access_const)
|
||||||
|
return soc_dma_port_other;
|
||||||
|
|
||||||
|
ch->paddr[port] = (uint8_t *) entry->u.mem.base +
|
||||||
|
(ch->vaddr[port] - entry->addr);
|
||||||
|
/* TODO: save bytes left to the end of the mapping somewhere so we
|
||||||
|
* can check we're not reading beyond it. */
|
||||||
|
return soc_dma_port_mem;
|
||||||
|
} else
|
||||||
|
return soc_dma_port_other;
|
||||||
|
}
|
||||||
|
|
||||||
|
void soc_dma_ch_update(struct soc_dma_ch_s *ch)
|
||||||
|
{
|
||||||
|
enum soc_dma_port_type src, dst;
|
||||||
|
|
||||||
|
src = soc_dma_ch_update_type(ch, 0);
|
||||||
|
if (src == soc_dma_port_other) {
|
||||||
|
ch->update = 0;
|
||||||
|
ch->transfer_fn = ch->dma->transfer_fn;
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
dst = soc_dma_ch_update_type(ch, 1);
|
||||||
|
|
||||||
|
/* TODO: use src and dst as array indices. */
|
||||||
|
if (src == soc_dma_port_mem && dst == soc_dma_port_mem)
|
||||||
|
ch->transfer_fn = transfer_mem2mem;
|
||||||
|
else if (src == soc_dma_port_mem && dst == soc_dma_port_fifo)
|
||||||
|
ch->transfer_fn = transfer_mem2fifo;
|
||||||
|
else if (src == soc_dma_port_fifo && dst == soc_dma_port_mem)
|
||||||
|
ch->transfer_fn = transfer_fifo2mem;
|
||||||
|
else if (src == soc_dma_port_fifo && dst == soc_dma_port_fifo)
|
||||||
|
ch->transfer_fn = transfer_fifo2fifo;
|
||||||
|
else
|
||||||
|
ch->transfer_fn = ch->dma->transfer_fn;
|
||||||
|
|
||||||
|
ch->update = (dst != soc_dma_port_other);
|
||||||
|
}
|
||||||
|
|
||||||
|
static void soc_dma_ch_freq_update(struct dma_s *s)
|
||||||
|
{
|
||||||
|
if (s->enabled_count)
|
||||||
|
/* We completely ignore channel priorities and stuff */
|
||||||
|
s->channel_freq = s->soc.freq / s->enabled_count;
|
||||||
|
else
|
||||||
|
/* TODO: Signal that we want to disable the functional clock and let
|
||||||
|
* the platform code decide what to do with it, i.e. check that
|
||||||
|
* auto-idle is enabled in the clock controller and if we are stopping
|
||||||
|
* the clock, do the same with any parent clocks that had only one
|
||||||
|
* user keeping them on and auto-idle enabled. */;
|
||||||
|
}
|
||||||
|
|
||||||
|
void soc_dma_set_request(struct soc_dma_ch_s *ch, int level)
|
||||||
|
{
|
||||||
|
struct dma_s *dma = (struct dma_s *) ch->dma;
|
||||||
|
|
||||||
|
dma->enabled_count += level - ch->enable;
|
||||||
|
|
||||||
|
if (level)
|
||||||
|
dma->ch_enable_mask |= 1 << ch->num;
|
||||||
|
else
|
||||||
|
dma->ch_enable_mask &= ~(1 << ch->num);
|
||||||
|
|
||||||
|
if (level != ch->enable) {
|
||||||
|
soc_dma_ch_freq_update(dma);
|
||||||
|
ch->enable = level;
|
||||||
|
|
||||||
|
if (!ch->enable)
|
||||||
|
qemu_del_timer(ch->timer);
|
||||||
|
else if (!ch->running)
|
||||||
|
soc_dma_ch_run(ch);
|
||||||
|
else
|
||||||
|
soc_dma_ch_schedule(ch, 1);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
void soc_dma_reset(struct soc_dma_s *soc)
|
||||||
|
{
|
||||||
|
struct dma_s *s = (struct dma_s *) soc;
|
||||||
|
|
||||||
|
s->soc.drqbmp = 0;
|
||||||
|
s->ch_enable_mask = 0;
|
||||||
|
s->enabled_count = 0;
|
||||||
|
soc_dma_ch_freq_update(s);
|
||||||
|
}
|
||||||
|
|
||||||
|
/* TODO: take a functional-clock argument */
|
||||||
|
struct soc_dma_s *soc_dma_init(int n)
|
||||||
|
{
|
||||||
|
int i;
|
||||||
|
struct dma_s *s = qemu_mallocz(sizeof(*s) + n * sizeof(*s->ch));
|
||||||
|
|
||||||
|
s->chnum = n;
|
||||||
|
s->soc.ch = s->ch;
|
||||||
|
for (i = 0; i < n; i ++) {
|
||||||
|
s->ch[i].dma = &s->soc;
|
||||||
|
s->ch[i].num = i;
|
||||||
|
s->ch[i].timer = qemu_new_timer(vm_clock, soc_dma_ch_run, &s->ch[i]);
|
||||||
|
}
|
||||||
|
|
||||||
|
soc_dma_reset(&s->soc);
|
||||||
|
|
||||||
|
return &s->soc;
|
||||||
|
}
|
||||||
|
|
||||||
|
void soc_dma_port_add_fifo(struct soc_dma_s *soc, target_phys_addr_t virt_base,
|
||||||
|
soc_dma_io_t fn, void *opaque, int out)
|
||||||
|
{
|
||||||
|
struct memmap_entry_s *entry;
|
||||||
|
struct dma_s *dma = (struct dma_s *) soc;
|
||||||
|
|
||||||
|
dma->memmap = realloc(dma->memmap, sizeof(*entry) *
|
||||||
|
(dma->memmap_size + 1));
|
||||||
|
entry = soc_dma_lookup(dma, virt_base);
|
||||||
|
|
||||||
|
if (dma->memmap_size) {
|
||||||
|
if (entry->type == soc_dma_port_mem) {
|
||||||
|
if (entry->addr <= virt_base &&
|
||||||
|
entry->addr + entry->u.mem.size > virt_base) {
|
||||||
|
fprintf(stderr, "%s: FIFO at " TARGET_FMT_lx
|
||||||
|
" collides with RAM region at " TARGET_FMT_lx
|
||||||
|
"-" TARGET_FMT_lx "\n", __FUNCTION__,
|
||||||
|
(target_ulong) virt_base,
|
||||||
|
(target_ulong) entry->addr, (target_ulong)
|
||||||
|
(entry->addr + entry->u.mem.size));
|
||||||
|
exit(-1);
|
||||||
|
}
|
||||||
|
|
||||||
|
if (entry->addr <= virt_base)
|
||||||
|
entry ++;
|
||||||
|
} else
|
||||||
|
while (entry < dma->memmap + dma->memmap_size &&
|
||||||
|
entry->addr <= virt_base) {
|
||||||
|
if (entry->addr == virt_base && entry->u.fifo.out == out) {
|
||||||
|
fprintf(stderr, "%s: FIFO at " TARGET_FMT_lx
|
||||||
|
" collides FIFO at " TARGET_FMT_lx "\n",
|
||||||
|
__FUNCTION__, (target_ulong) virt_base,
|
||||||
|
(target_ulong) entry->addr);
|
||||||
|
exit(-1);
|
||||||
|
}
|
||||||
|
|
||||||
|
entry ++;
|
||||||
|
}
|
||||||
|
|
||||||
|
memmove(entry + 1, entry,
|
||||||
|
(uint8_t *) (dma->memmap + dma->memmap_size ++) -
|
||||||
|
(uint8_t *) entry);
|
||||||
|
} else
|
||||||
|
dma->memmap_size ++;
|
||||||
|
|
||||||
|
entry->addr = virt_base;
|
||||||
|
entry->type = soc_dma_port_fifo;
|
||||||
|
entry->u.fifo.fn = fn;
|
||||||
|
entry->u.fifo.opaque = opaque;
|
||||||
|
entry->u.fifo.out = out;
|
||||||
|
}
|
||||||
|
|
||||||
|
void soc_dma_port_add_mem(struct soc_dma_s *soc, uint8_t *phys_base,
|
||||||
|
target_phys_addr_t virt_base, size_t size)
|
||||||
|
{
|
||||||
|
struct memmap_entry_s *entry;
|
||||||
|
struct dma_s *dma = (struct dma_s *) soc;
|
||||||
|
|
||||||
|
dma->memmap = realloc(dma->memmap, sizeof(*entry) *
|
||||||
|
(dma->memmap_size + 1));
|
||||||
|
entry = soc_dma_lookup(dma, virt_base);
|
||||||
|
|
||||||
|
if (dma->memmap_size) {
|
||||||
|
if (entry->type == soc_dma_port_mem) {
|
||||||
|
if ((entry->addr >= virt_base && entry->addr < virt_base + size) ||
|
||||||
|
(entry->addr <= virt_base &&
|
||||||
|
entry->addr + entry->u.mem.size > virt_base)) {
|
||||||
|
fprintf(stderr, "%s: RAM at " TARGET_FMT_lx "-" TARGET_FMT_lx
|
||||||
|
" collides with RAM region at " TARGET_FMT_lx
|
||||||
|
"-" TARGET_FMT_lx "\n", __FUNCTION__,
|
||||||
|
(target_ulong) virt_base,
|
||||||
|
(target_ulong) (virt_base + size),
|
||||||
|
(target_ulong) entry->addr, (target_ulong)
|
||||||
|
(entry->addr + entry->u.mem.size));
|
||||||
|
exit(-1);
|
||||||
|
}
|
||||||
|
|
||||||
|
if (entry->addr <= virt_base)
|
||||||
|
entry ++;
|
||||||
|
} else {
|
||||||
|
if (entry->addr >= virt_base &&
|
||||||
|
entry->addr < virt_base + size) {
|
||||||
|
fprintf(stderr, "%s: RAM at " TARGET_FMT_lx "-" TARGET_FMT_lx
|
||||||
|
" collides with FIFO at " TARGET_FMT_lx
|
||||||
|
"\n", __FUNCTION__,
|
||||||
|
(target_ulong) virt_base,
|
||||||
|
(target_ulong) (virt_base + size),
|
||||||
|
(target_ulong) entry->addr);
|
||||||
|
exit(-1);
|
||||||
|
}
|
||||||
|
|
||||||
|
while (entry < dma->memmap + dma->memmap_size &&
|
||||||
|
entry->addr <= virt_base)
|
||||||
|
entry ++;
|
||||||
|
}
|
||||||
|
|
||||||
|
memmove(entry + 1, entry,
|
||||||
|
(uint8_t *) (dma->memmap + dma->memmap_size ++) -
|
||||||
|
(uint8_t *) entry);
|
||||||
|
} else
|
||||||
|
dma->memmap_size ++;
|
||||||
|
|
||||||
|
entry->addr = virt_base;
|
||||||
|
entry->type = soc_dma_port_mem;
|
||||||
|
entry->u.mem.base = phys_base;
|
||||||
|
entry->u.mem.size = size;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* TODO: port removal for ports like PCMCIA memory */
|
115
hw/soc_dma.h
Normal file
115
hw/soc_dma.h
Normal file
@ -0,0 +1,115 @@
|
|||||||
|
/*
|
||||||
|
* On-chip DMA controller framework.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2008 Nokia Corporation
|
||||||
|
* Written by Andrzej Zaborowski <andrew@openedhand.com>
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or
|
||||||
|
* modify it under the terms of the GNU General Public License as
|
||||||
|
* published by the Free Software Foundation; either version 2 or
|
||||||
|
* (at your option) version 3 of the License.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program; if not, write to the Free Software
|
||||||
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||||
|
* MA 02111-1307 USA
|
||||||
|
*/
|
||||||
|
|
||||||
|
struct soc_dma_s;
|
||||||
|
struct soc_dma_ch_s;
|
||||||
|
typedef void (*soc_dma_io_t)(void *opaque, uint8_t *buf, int len);
|
||||||
|
typedef void (*soc_dma_transfer_t)(struct soc_dma_ch_s *ch);
|
||||||
|
|
||||||
|
enum soc_dma_port_type {
|
||||||
|
soc_dma_port_mem,
|
||||||
|
soc_dma_port_fifo,
|
||||||
|
soc_dma_port_other,
|
||||||
|
};
|
||||||
|
|
||||||
|
enum soc_dma_access_type {
|
||||||
|
soc_dma_access_const,
|
||||||
|
soc_dma_access_linear,
|
||||||
|
soc_dma_access_other,
|
||||||
|
};
|
||||||
|
|
||||||
|
struct soc_dma_ch_s {
|
||||||
|
/* Private */
|
||||||
|
struct soc_dma_s *dma;
|
||||||
|
int num;
|
||||||
|
QEMUTimer *timer;
|
||||||
|
|
||||||
|
/* Set by soc_dma.c */
|
||||||
|
int enable;
|
||||||
|
int update;
|
||||||
|
|
||||||
|
/* This should be set by dma->setup_fn(). */
|
||||||
|
int bytes;
|
||||||
|
/* Initialised by the DMA module, call soc_dma_ch_update after writing. */
|
||||||
|
enum soc_dma_access_type type[2];
|
||||||
|
target_phys_addr_t vaddr[2]; /* Updated by .transfer_fn(). */
|
||||||
|
/* Private */
|
||||||
|
void *paddr[2];
|
||||||
|
soc_dma_io_t io_fn[2];
|
||||||
|
void *io_opaque[2];
|
||||||
|
|
||||||
|
int running;
|
||||||
|
soc_dma_transfer_t transfer_fn;
|
||||||
|
|
||||||
|
/* Set and used by the DMA module. */
|
||||||
|
void *opaque;
|
||||||
|
};
|
||||||
|
|
||||||
|
struct soc_dma_s {
|
||||||
|
/* Following fields are set by the SoC DMA module and can be used
|
||||||
|
* by anybody. */
|
||||||
|
uint64_t drqbmp; /* Is zeroed by soc_dma_reset() */
|
||||||
|
qemu_irq *drq;
|
||||||
|
void *opaque;
|
||||||
|
int64_t freq;
|
||||||
|
soc_dma_transfer_t transfer_fn;
|
||||||
|
soc_dma_transfer_t setup_fn;
|
||||||
|
/* Set by soc_dma_init() for use by the DMA module. */
|
||||||
|
struct soc_dma_ch_s *ch;
|
||||||
|
};
|
||||||
|
|
||||||
|
/* Call to activate or stop a DMA channel. */
|
||||||
|
void soc_dma_set_request(struct soc_dma_ch_s *ch, int level);
|
||||||
|
/* Call after every write to one of the following fields and before
|
||||||
|
* calling soc_dma_set_request(ch, 1):
|
||||||
|
* ch->type[0...1],
|
||||||
|
* ch->vaddr[0...1],
|
||||||
|
* ch->paddr[0...1],
|
||||||
|
* or after a soc_dma_port_add_fifo() or soc_dma_port_add_mem(). */
|
||||||
|
void soc_dma_ch_update(struct soc_dma_ch_s *ch);
|
||||||
|
|
||||||
|
/* The SoC should call this when the DMA module is being reset. */
|
||||||
|
void soc_dma_reset(struct soc_dma_s *s);
|
||||||
|
struct soc_dma_s *soc_dma_init(int n);
|
||||||
|
|
||||||
|
void soc_dma_port_add_fifo(struct soc_dma_s *dma, target_phys_addr_t virt_base,
|
||||||
|
soc_dma_io_t fn, void *opaque, int out);
|
||||||
|
void soc_dma_port_add_mem(struct soc_dma_s *dma, uint8_t *phys_base,
|
||||||
|
target_phys_addr_t virt_base, size_t size);
|
||||||
|
|
||||||
|
static inline void soc_dma_port_add_fifo_in(struct soc_dma_s *dma,
|
||||||
|
target_phys_addr_t virt_base, soc_dma_io_t fn, void *opaque)
|
||||||
|
{
|
||||||
|
return soc_dma_port_add_fifo(dma, virt_base, fn, opaque, 0);
|
||||||
|
}
|
||||||
|
|
||||||
|
static inline void soc_dma_port_add_fifo_out(struct soc_dma_s *dma,
|
||||||
|
target_phys_addr_t virt_base, soc_dma_io_t fn, void *opaque)
|
||||||
|
{
|
||||||
|
return soc_dma_port_add_fifo(dma, virt_base, fn, opaque, 1);
|
||||||
|
}
|
||||||
|
|
||||||
|
static inline void soc_dma_port_add_mem_ram(struct soc_dma_s *dma,
|
||||||
|
ram_addr_t offset, target_phys_addr_t virt_base, size_t size)
|
||||||
|
{
|
||||||
|
return soc_dma_port_add_mem(dma, phys_ram_base + offset, virt_base, size);
|
||||||
|
}
|
Loading…
Reference in New Issue
Block a user