target-mips: Add ASE DSP resources access check

Add MIPS ASE DSP resources access check.

Signed-off-by: Jia Liu <proljc@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This commit is contained in:
Jia Liu 2012-10-24 22:17:02 +08:00 committed by Aurelien Jarno
parent 235eb0158c
commit 853c3240c0
4 changed files with 53 additions and 2 deletions

View File

@ -2286,6 +2286,12 @@ done_syscall:
queue_signal(env, info.si_signo, &info);
}
break;
case EXCP_DSPDIS:
info.si_signo = TARGET_SIGILL;
info.si_errno = 0;
info.si_code = TARGET_ILL_ILLOPC;
queue_signal(env, info.si_signo, &info);
break;
default:
// error:
fprintf(stderr, "qemu: unhandled CPU exception 0x%x - aborting\n",

View File

@ -415,7 +415,7 @@ struct CPUMIPSState {
int error_code;
uint32_t hflags; /* CPU State */
/* TMASK defines different execution modes */
#define MIPS_HFLAG_TMASK 0x007FF
#define MIPS_HFLAG_TMASK 0xC07FF
#define MIPS_HFLAG_MODE 0x00007 /* execution modes */
/* The KSU flags must be the lowest bits in hflags. The flag order
must be the same as defined for CP0 Status. This allows to use
@ -453,6 +453,9 @@ struct CPUMIPSState {
#define MIPS_HFLAG_BDS32 0x10000 /* branch requires 32-bit delay slot */
#define MIPS_HFLAG_BX 0x20000 /* branch exchanges execution mode */
#define MIPS_HFLAG_BMASK (MIPS_HFLAG_BMASK_BASE | MIPS_HFLAG_BMASK_EXT)
/* MIPS DSP resources access. */
#define MIPS_HFLAG_DSP 0x40000 /* Enable access to MIPS DSP resources. */
#define MIPS_HFLAG_DSPR2 0x80000 /* Enable access to MIPS DSPR2 resources. */
target_ulong btarget; /* Jump / branch target */
target_ulong bcond; /* Branch condition (if needed) */
@ -610,8 +613,9 @@ enum {
EXCP_MDMX,
EXCP_C2E,
EXCP_CACHE, /* 32 */
EXCP_DSPDIS,
EXCP_LAST = EXCP_CACHE,
EXCP_LAST = EXCP_DSPDIS,
};
/* Dummy exception for conditional stores. */
#define EXCP_SC 0x100
@ -772,6 +776,21 @@ static inline void compute_hflags(CPUMIPSState *env)
if (env->CP0_Status & (1 << CP0St_FR)) {
env->hflags |= MIPS_HFLAG_F64;
}
if (env->insn_flags & ASE_DSPR2) {
/* Enables access MIPS DSP resources, now our cpu is DSP ASER2,
so enable to access DSPR2 resources. */
if (env->CP0_Status & (1 << CP0St_MX)) {
env->hflags |= MIPS_HFLAG_DSP | MIPS_HFLAG_DSPR2;
}
} else if (env->insn_flags & ASE_DSP) {
/* Enables access MIPS DSP resources, now our cpu is DSP ASE,
so enable to access DSP resources. */
if (env->CP0_Status & (1 << CP0St_MX)) {
env->hflags |= MIPS_HFLAG_DSP;
}
}
if (env->insn_flags & ISA_MIPS32R2) {
if (env->active_fpu.fcr0 & (1 << FCR0_F64)) {
env->hflags |= MIPS_HFLAG_COP1X;

View File

@ -592,6 +592,9 @@ void do_interrupt (CPUMIPSState *env)
case EXCP_THREAD:
cause = 25;
goto set_EPC;
case EXCP_DSPDIS:
cause = 26;
goto set_EPC;
case EXCP_CACHE:
cause = 30;
if (env->CP0_Status & (1 << CP0St_BEV)) {

View File

@ -948,6 +948,24 @@ static inline void check_cp1_registers(DisasContext *ctx, int regs)
generate_exception(ctx, EXCP_RI);
}
/* Verify that the processor is running with DSP instructions enabled.
This is enabled by CP0 Status register MX(24) bit.
*/
static inline void check_dsp(DisasContext *ctx)
{
if (unlikely(!(ctx->hflags & MIPS_HFLAG_DSP))) {
generate_exception(ctx, EXCP_DSPDIS);
}
}
static inline void check_dspr2(DisasContext *ctx)
{
if (unlikely(!(ctx->hflags & MIPS_HFLAG_DSPR2))) {
generate_exception(ctx, EXCP_DSPDIS);
}
}
/* This code generates a "reserved instruction" exception if the
CPU does not support the instruction set corresponding to flags. */
static inline void check_insn(CPUMIPSState *env, DisasContext *ctx, int flags)
@ -13209,6 +13227,11 @@ void cpu_state_reset(CPUMIPSState *env)
if (env->CP0_Config1 & (1 << CP0C1_FP)) {
env->CP0_Status |= (1 << CP0St_CU1);
}
if (env->cpu_model->insn_flags & ASE_DSPR2) {
env->hflags |= MIPS_HFLAG_DSP | MIPS_HFLAG_DSPR2;
} else if (env->cpu_model->insn_flags & ASE_DSP) {
env->hflags |= MIPS_HFLAG_DSP;
}
#else
if (env->hflags & MIPS_HFLAG_BMASK) {
/* If the exception was raised from a delay slot,