added virtual USB mouse support

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1599 c046a42c-6fe2-441c-8c8c-71466251a162
This commit is contained in:
bellard 2005-11-05 16:57:08 +00:00
parent 92414fdca0
commit 59ae540c3d
4 changed files with 373 additions and 8 deletions

View File

@ -294,7 +294,8 @@ ifeq ($(TARGET_BASE_ARCH), i386)
# Hardware support
VL_OBJS+= ide.o ne2000.o pckbd.o vga.o $(SOUND_HW) dma.o $(AUDIODRV)
VL_OBJS+= fdc.o mc146818rtc.o serial.o i8259.o i8254.o pc.o
VL_OBJS+= cirrus_vga.o mixeng.o apic.o parallel.o usb.o usb-uhci.o usb-linux.o
VL_OBJS+= cirrus_vga.o mixeng.o apic.o parallel.o
VL_OBJS+= usb.o usb-uhci.o usb-linux.o usb-hid.o
DEFINES += -DHAS_AUDIO
endif
ifeq ($(TARGET_BASE_ARCH), ppc)

21
hw/pc.c
View File

@ -622,24 +622,31 @@ static void pc_init1(int ram_size, int vga_ram_size, int boot_device,
if (pci_enabled && usb_enabled) {
USBPort *usb_root_ports[2];
USBDevice *usb_hub;
USBDevice *usb_dev;
usb_uhci_init(pci_bus, usb_root_ports);
#if 0
{
USBPort *usb_hub1_ports[4];
USBPort *usb_hub2_ports[2];
/* test: we simulate a USB hub */
usb_hub = usb_hub_init(usb_hub1_ports, 4);
usb_attach(usb_root_ports[0], usb_hub);
usb_dev = usb_hub_init(usb_hub1_ports, 4);
usb_attach(usb_root_ports[0], usb_dev);
/* test: we simulate a USB hub */
usb_hub = usb_hub_init(usb_hub2_ports, 2);
usb_attach(usb_hub1_ports[0], usb_hub);
usb_dev = usb_hub_init(usb_hub2_ports, 2);
usb_attach(usb_hub1_ports[0], usb_dev);
}
#endif
#if 0
/* USB mouse */
usb_dev = usb_mouse_init();
usb_attach(usb_root_ports[0], usb_dev);
#endif
#if 1
/* simulated hub with the host USB devices connected to it */
usb_hub = usb_host_hub_init();
usb_attach(usb_root_ports[0], usb_hub);
usb_dev = usb_host_hub_init();
usb_attach(usb_root_ports[0], usb_dev);
#endif
}
/* must be done after all PCI devices are instanciated */

347
hw/usb-hid.c Normal file
View File

@ -0,0 +1,347 @@
/*
* QEMU USB HID devices
*
* Copyright (c) 2005 Fabrice Bellard
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "vl.h"
/* HID interface requests */
#define GET_REPORT 0xa101
#define GET_IDLE 0xa102
#define GET_PROTOCOL 0xa103
#define SET_IDLE 0x210a
#define SET_PROTOCOL 0x210b
typedef struct USBMouseState {
USBDevice dev;
int dx, dy, dz, buttons_state;
} USBMouseState;
/* mostly the same values as the Bochs USB Mouse device */
static const uint8_t qemu_mouse_dev_descriptor[] = {
0x12, /* u8 bLength; */
0x01, /* u8 bDescriptorType; Device */
0x10, 0x00, /* u16 bcdUSB; v1.0 */
0x00, /* u8 bDeviceClass; */
0x00, /* u8 bDeviceSubClass; */
0x00, /* u8 bDeviceProtocol; [ low/full speeds only ] */
0x08, /* u8 bMaxPacketSize0; 8 Bytes */
0x27, 0x06, /* u16 idVendor; */
0x01, 0x00, /* u16 idProduct; */
0x00, 0x00, /* u16 bcdDevice */
0x03, /* u8 iManufacturer; */
0x02, /* u8 iProduct; */
0x01, /* u8 iSerialNumber; */
0x01 /* u8 bNumConfigurations; */
};
static const uint8_t qemu_mouse_config_descriptor[] = {
/* one configuration */
0x09, /* u8 bLength; */
0x02, /* u8 bDescriptorType; Configuration */
0x22, 0x00, /* u16 wTotalLength; */
0x01, /* u8 bNumInterfaces; (1) */
0x01, /* u8 bConfigurationValue; */
0x04, /* u8 iConfiguration; */
0xa0, /* u8 bmAttributes;
Bit 7: must be set,
6: Self-powered,
5: Remote wakeup,
4..0: resvd */
50, /* u8 MaxPower; */
/* USB 1.1:
* USB 2.0, single TT organization (mandatory):
* one interface, protocol 0
*
* USB 2.0, multiple TT organization (optional):
* two interfaces, protocols 1 (like single TT)
* and 2 (multiple TT mode) ... config is
* sometimes settable
* NOT IMPLEMENTED
*/
/* one interface */
0x09, /* u8 if_bLength; */
0x04, /* u8 if_bDescriptorType; Interface */
0x00, /* u8 if_bInterfaceNumber; */
0x00, /* u8 if_bAlternateSetting; */
0x01, /* u8 if_bNumEndpoints; */
0x03, /* u8 if_bInterfaceClass; */
0x01, /* u8 if_bInterfaceSubClass; */
0x02, /* u8 if_bInterfaceProtocol; [usb1.1 or single tt] */
0x05, /* u8 if_iInterface; */
/* one endpoint (status change endpoint) */
0x07, /* u8 ep_bLength; */
0x05, /* u8 ep_bDescriptorType; Endpoint */
0x81, /* u8 ep_bEndpointAddress; IN Endpoint 1 */
0x03, /* u8 ep_bmAttributes; Interrupt */
0x03, 0x00, /* u16 ep_wMaxPacketSize; */
0x0a, /* u8 ep_bInterval; (255ms -- usb 2.0 spec) */
/* HID descriptor */
0x09, /* u8 bLength; */
0x21, /* u8 bDescriptorType; */
0x01, 0x00, /* u16 HID_class */
0x00, /* u8 country_code */
0x01, /* u8 num_descriptors */
0x22, /* u8 type; Report */
50, 0, /* u16 len */
};
static const uint8_t qemu_mouse_hid_report_descriptor[] = {
0x05, 0x01, 0x09, 0x02, 0xA1, 0x01, 0x09, 0x01,
0xA1, 0x00, 0x05, 0x09, 0x19, 0x01, 0x29, 0x03,
0x15, 0x00, 0x25, 0x01, 0x95, 0x03, 0x75, 0x01,
0x81, 0x02, 0x95, 0x01, 0x75, 0x05, 0x81, 0x01,
0x05, 0x01, 0x09, 0x30, 0x09, 0x31, 0x15, 0x81,
0x25, 0x7F, 0x75, 0x08, 0x95, 0x02, 0x81, 0x06,
0xC0, 0xC0,
};
static void usb_mouse_event(void *opaque,
int dx1, int dy1, int dz1, int buttons_state)
{
USBMouseState *s = opaque;
s->dx += dx1;
s->dy += dy1;
s->dz += dz1;
s->buttons_state = buttons_state;
}
static inline int int_clamp(int val, int vmin, int vmax)
{
if (val < vmin)
return vmin;
else if (val > vmax)
return vmax;
else
return val;
}
static int usb_mouse_poll(USBMouseState *s, uint8_t *buf, int len)
{
int dx, dy, dz, b, l;
dx = int_clamp(s->dx, -128, 127);
dy = int_clamp(s->dy, -128, 127);
dz = int_clamp(s->dz, -128, 127);
s->dx -= dx;
s->dy -= dy;
s->dz -= dz;
b = 0;
if (s->buttons_state & MOUSE_EVENT_LBUTTON)
b |= 0x01;
if (s->buttons_state & MOUSE_EVENT_RBUTTON)
b |= 0x02;
if (s->buttons_state & MOUSE_EVENT_MBUTTON)
b |= 0x04;
buf[0] = b;
buf[1] = dx;
buf[2] = dy;
l = 3;
if (len >= 4) {
buf[3] = dz;
l = 4;
}
return l;
}
static void usb_mouse_handle_reset(USBDevice *dev)
{
USBMouseState *s = (USBMouseState *)dev;
s->dx = 0;
s->dy = 0;
s->dz = 0;
s->buttons_state = 0;
}
static int usb_mouse_handle_control(USBDevice *dev, int request, int value,
int index, int length, uint8_t *data)
{
USBMouseState *s = (USBMouseState *)dev;
int ret;
switch(request) {
case DeviceRequest | USB_REQ_GET_STATUS:
data[0] = (1 << USB_DEVICE_SELF_POWERED) |
(dev->remote_wakeup << USB_DEVICE_REMOTE_WAKEUP);
data[1] = 0x00;
ret = 2;
break;
case DeviceOutRequest | USB_REQ_CLEAR_FEATURE:
if (value == USB_DEVICE_REMOTE_WAKEUP) {
dev->remote_wakeup = 0;
} else {
goto fail;
}
ret = 0;
break;
case DeviceOutRequest | USB_REQ_SET_FEATURE:
if (value == USB_DEVICE_REMOTE_WAKEUP) {
dev->remote_wakeup = 1;
} else {
goto fail;
}
ret = 0;
break;
case DeviceOutRequest | USB_REQ_SET_ADDRESS:
dev->addr = value;
ret = 0;
break;
case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
switch(value >> 8) {
case USB_DT_DEVICE:
memcpy(data, qemu_mouse_dev_descriptor,
sizeof(qemu_mouse_dev_descriptor));
ret = sizeof(qemu_mouse_dev_descriptor);
break;
case USB_DT_CONFIG:
memcpy(data, qemu_mouse_config_descriptor,
sizeof(qemu_mouse_config_descriptor));
ret = sizeof(qemu_mouse_config_descriptor);
break;
case USB_DT_STRING:
switch(value & 0xff) {
case 0:
/* language ids */
data[0] = 4;
data[1] = 3;
data[2] = 0x09;
data[3] = 0x04;
ret = 4;
break;
case 1:
/* serial number */
ret = set_usb_string(data, "1");
break;
case 2:
/* product description */
ret = set_usb_string(data, "QEMU USB Mouse");
break;
case 3:
/* vendor description */
ret = set_usb_string(data, "QEMU " QEMU_VERSION);
break;
case 4:
ret = set_usb_string(data, "HID Mouse");
break;
case 5:
ret = set_usb_string(data, "Endpoint1 Interrupt Pipe");
break;
default:
goto fail;
}
break;
default:
goto fail;
}
break;
case DeviceRequest | USB_REQ_GET_CONFIGURATION:
data[0] = 1;
ret = 1;
break;
case DeviceOutRequest | USB_REQ_SET_CONFIGURATION:
ret = 0;
break;
case DeviceRequest | USB_REQ_GET_INTERFACE:
data[0] = 0;
ret = 1;
break;
case DeviceOutRequest | USB_REQ_SET_INTERFACE:
ret = 0;
break;
/* hid specific requests */
case InterfaceRequest | USB_REQ_GET_DESCRIPTOR:
switch(value >> 8) {
case 0x22:
memcpy(data, qemu_mouse_hid_report_descriptor,
sizeof(qemu_mouse_hid_report_descriptor));
ret = sizeof(qemu_mouse_hid_report_descriptor);
break;
default:
goto fail;
}
break;
case GET_REPORT:
ret = usb_mouse_poll(s, data, length);
break;
case SET_IDLE:
ret = 0;
break;
default:
fail:
ret = USB_RET_STALL;
break;
}
return ret;
}
static int usb_mouse_handle_data(USBDevice *dev, int pid,
uint8_t devep, uint8_t *data, int len)
{
USBMouseState *s = (USBMouseState *)dev;
int ret;
switch(pid) {
case USB_TOKEN_IN:
if (devep == 1) {
ret = usb_mouse_poll(s, data, len);
} else {
goto fail;
}
break;
case USB_TOKEN_OUT:
default:
fail:
ret = USB_RET_STALL;
break;
}
return ret;
}
USBDevice *usb_mouse_init(void)
{
USBMouseState *s;
s = qemu_mallocz(sizeof(USBMouseState));
if (!s)
return NULL;
s->dev.speed = USB_SPEED_FULL;
s->dev.handle_packet = usb_generic_handle_packet;
s->dev.handle_reset = usb_mouse_handle_reset;
s->dev.handle_control = usb_mouse_handle_control;
s->dev.handle_data = usb_mouse_handle_data;
qemu_add_mouse_event_handler(usb_mouse_event, s);
return (USBDevice *)s;
}

View File

@ -64,6 +64,13 @@
#define DeviceRequest ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8)
#define DeviceOutRequest ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8)
#define InterfaceRequest \
((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
#define InterfaceOutRequest \
((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
#define EndpointRequest ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_ENDPOINT)<<8)
#define EndpointOutRequest \
((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_ENDPOINT)<<8)
#define USB_REQ_GET_STATUS 0x00
#define USB_REQ_CLEAR_FEATURE 0x01
@ -137,3 +144,6 @@ void usb_uhci_init(PCIBus *bus, USBPort **usb_ports);
/* usb-linux.c */
USBDevice *usb_host_hub_init(void);
/* usb-hid.c */
USBDevice *usb_mouse_init(void);