hw/sd: ssi-sd: Add a state representing Nac

Per the "Physical Layer Specification Version 8.00" chapter 7.5.2,
"Data Read", there is a minimum 8 clock cycles (Nac) after the card
response and before data block shows up on the data out line. This
applies to both single and multiple block read operations.

Current implementation of single block read already satisfies the
timing requirement as in the RESPONSE state after all responses are
transferred the state remains unchanged. In the next 8 clock cycles
it jumps to DATA_START state if data is ready.

However we need an explicit state when expanding our support to
multiple block read in the future. Let's add a new state PREP_DATA
explicitly in the ssi-sd state machine to represent Nac.

Note we don't change the single block read state machine to let it
jump from RESPONSE state to DATA_START state as that effectively
generates a 16 clock cycles Nac, which might not be safe. As the
spec says the maximum Nac shall be calculated from several fields
encoded in the CSD register, we don't want to bother updating CSD
to ensure our Nac is within range to complicate things.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210123104016.17485-9-bmeng.cn@gmail.com>
[PMD: Change VMState version id 4 -> 5]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This commit is contained in:
Bin Meng 2021-01-23 18:39:59 +08:00 committed by Philippe Mathieu-Daudé
parent 2d174cc38b
commit 3a67cbe619

View File

@ -39,6 +39,7 @@ typedef enum {
SSI_SD_CMDARG,
SSI_SD_PREP_RESP,
SSI_SD_RESPONSE,
SSI_SD_PREP_DATA,
SSI_SD_DATA_START,
SSI_SD_DATA_READ,
SSI_SD_DATA_CRC16,
@ -194,6 +195,10 @@ static uint32_t ssi_sd_transfer(SSIPeripheral *dev, uint32_t val)
s->mode = SSI_SD_CMD;
}
return 0xff;
case SSI_SD_PREP_DATA:
DPRINTF("Prepare data block (Nac)\n");
s->mode = SSI_SD_DATA_START;
return 0xff;
case SSI_SD_DATA_START:
DPRINTF("Start read block\n");
s->mode = SSI_SD_DATA_READ;
@ -244,8 +249,8 @@ static int ssi_sd_post_load(void *opaque, int version_id)
static const VMStateDescription vmstate_ssi_sd = {
.name = "ssi_sd",
.version_id = 4,
.minimum_version_id = 4,
.version_id = 5,
.minimum_version_id = 5,
.post_load = ssi_sd_post_load,
.fields = (VMStateField []) {
VMSTATE_UINT32(mode, ssi_sd_state),