manual: escape backslashes in "parsed-literal" blocks

According to
<https://docutils.sourceforge.io/docs/ref/rst/directives.html#parsed-literal>,
"inline markup is recognized and there is no protection from parsing.
Backslash-escapes may be necessary to prevent unintended parsing".

The qemu(1) manual page (formatted with Sphinx 2.2.2) has several overlong
lines on my system. A stand-alone backslash at EOL serves as line
continuation in a "parsed-literal" block. Therefore, escape the
backslashes that we want to appear as such in the formatted documentation.

Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200908172111.19072-1-lersek@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This commit is contained in:
Laszlo Ersek 2020-09-08 19:21:11 +02:00 committed by Laurent Vivier
parent cf0560b9c1
commit 353a06b425
2 changed files with 58 additions and 58 deletions

View File

@ -25,8 +25,8 @@ These are specified using a special URL syntax.
.. parsed-literal:: .. parsed-literal::
|qemu_system| -iscsi initiator-name=iqn.2001-04.com.example:my-initiator \ |qemu_system| -iscsi initiator-name=iqn.2001-04.com.example:my-initiator \\
-cdrom iscsi://192.0.2.1/iqn.2001-04.com.example/2 \ -cdrom iscsi://192.0.2.1/iqn.2001-04.com.example/2 \\
-drive file=iscsi://192.0.2.1/iqn.2001-04.com.example/1 -drive file=iscsi://192.0.2.1/iqn.2001-04.com.example/1
Example (CHAP username/password via URL): Example (CHAP username/password via URL):
@ -39,8 +39,8 @@ These are specified using a special URL syntax.
.. parsed-literal:: .. parsed-literal::
LIBISCSI_CHAP_USERNAME="user" \ LIBISCSI_CHAP_USERNAME="user" \\
LIBISCSI_CHAP_PASSWORD="password" \ LIBISCSI_CHAP_PASSWORD="password" \\
|qemu_system| -drive file=iscsi://192.0.2.1/iqn.2001-04.com.example/1 |qemu_system| -drive file=iscsi://192.0.2.1/iqn.2001-04.com.example/1
``NBD`` ``NBD``

View File

@ -373,9 +373,9 @@ SRST
.. parsed-literal:: .. parsed-literal::
|qemu_system| \ |qemu_system| \\
-add-fd fd=3,set=2,opaque="rdwr:/path/to/file" \ -add-fd fd=3,set=2,opaque="rdwr:/path/to/file" \\
-add-fd fd=4,set=2,opaque="rdonly:/path/to/file" \ -add-fd fd=4,set=2,opaque="rdonly:/path/to/file" \\
-drive file=/dev/fdset/2,index=0,media=disk -drive file=/dev/fdset/2,index=0,media=disk
ERST ERST
@ -1338,9 +1338,9 @@ SRST
.. parsed-literal:: .. parsed-literal::
|qemu_system| \ |qemu_system| \\
-add-fd fd=3,set=2,opaque="rdwr:/path/to/file" \ -add-fd fd=3,set=2,opaque="rdwr:/path/to/file" \\
-add-fd fd=4,set=2,opaque="rdonly:/path/to/file" \ -add-fd fd=4,set=2,opaque="rdonly:/path/to/file" \\
-drive file=/dev/fdset/2,index=0,media=disk -drive file=/dev/fdset/2,index=0,media=disk
You can connect a CDROM to the slave of ide0: You can connect a CDROM to the slave of ide0:
@ -2593,7 +2593,7 @@ SRST
.. parsed-literal:: .. parsed-literal::
|qemu_system| -hda linux.img -boot n -device e1000,netdev=n1 \ |qemu_system| -hda linux.img -boot n -device e1000,netdev=n1 \\
-netdev user,id=n1,tftp=/path/to/tftp/files,bootfile=/pxelinux.0 -netdev user,id=n1,tftp=/path/to/tftp/files,bootfile=/pxelinux.0
``smb=dir[,smbserver=addr]`` ``smb=dir[,smbserver=addr]``
@ -2703,15 +2703,15 @@ SRST
#launch a QEMU instance with two NICs, each one connected #launch a QEMU instance with two NICs, each one connected
#to a TAP device #to a TAP device
|qemu_system| linux.img \ |qemu_system| linux.img \\
-netdev tap,id=nd0,ifname=tap0 -device e1000,netdev=nd0 \ -netdev tap,id=nd0,ifname=tap0 -device e1000,netdev=nd0 \\
-netdev tap,id=nd1,ifname=tap1 -device rtl8139,netdev=nd1 -netdev tap,id=nd1,ifname=tap1 -device rtl8139,netdev=nd1
.. parsed-literal:: .. parsed-literal::
#launch a QEMU instance with the default network helper to #launch a QEMU instance with the default network helper to
#connect a TAP device to bridge br0 #connect a TAP device to bridge br0
|qemu_system| linux.img -device virtio-net-pci,netdev=n1 \ |qemu_system| linux.img -device virtio-net-pci,netdev=n1 \\
-netdev tap,id=n1,"helper=/path/to/qemu-bridge-helper" -netdev tap,id=n1,"helper=/path/to/qemu-bridge-helper"
``-netdev bridge,id=id[,br=bridge][,helper=helper]`` ``-netdev bridge,id=id[,br=bridge][,helper=helper]``
@ -2749,12 +2749,12 @@ SRST
.. parsed-literal:: .. parsed-literal::
# launch a first QEMU instance # launch a first QEMU instance
|qemu_system| linux.img \ |qemu_system| linux.img \\
-device e1000,netdev=n1,mac=52:54:00:12:34:56 \ -device e1000,netdev=n1,mac=52:54:00:12:34:56 \\
-netdev socket,id=n1,listen=:1234 -netdev socket,id=n1,listen=:1234
# connect the network of this instance to the network of the first instance # connect the network of this instance to the network of the first instance
|qemu_system| linux.img \ |qemu_system| linux.img \\
-device e1000,netdev=n2,mac=52:54:00:12:34:57 \ -device e1000,netdev=n2,mac=52:54:00:12:34:57 \\
-netdev socket,id=n2,connect=127.0.0.1:1234 -netdev socket,id=n2,connect=127.0.0.1:1234
``-netdev socket,id=id[,fd=h][,mcast=maddr:port[,localaddr=addr]]`` ``-netdev socket,id=id[,fd=h][,mcast=maddr:port[,localaddr=addr]]``
@ -2776,16 +2776,16 @@ SRST
.. parsed-literal:: .. parsed-literal::
# launch one QEMU instance # launch one QEMU instance
|qemu_system| linux.img \ |qemu_system| linux.img \\
-device e1000,netdev=n1,mac=52:54:00:12:34:56 \ -device e1000,netdev=n1,mac=52:54:00:12:34:56 \\
-netdev socket,id=n1,mcast=230.0.0.1:1234 -netdev socket,id=n1,mcast=230.0.0.1:1234
# launch another QEMU instance on same "bus" # launch another QEMU instance on same "bus"
|qemu_system| linux.img \ |qemu_system| linux.img \\
-device e1000,netdev=n2,mac=52:54:00:12:34:57 \ -device e1000,netdev=n2,mac=52:54:00:12:34:57 \\
-netdev socket,id=n2,mcast=230.0.0.1:1234 -netdev socket,id=n2,mcast=230.0.0.1:1234
# launch yet another QEMU instance on same "bus" # launch yet another QEMU instance on same "bus"
|qemu_system| linux.img \ |qemu_system| linux.img \\
-device e1000,netdev=n3,mac=52:54:00:12:34:58 \ -device e1000,netdev=n3,mac=52:54:00:12:34:58 \\
-netdev socket,id=n3,mcast=230.0.0.1:1234 -netdev socket,id=n3,mcast=230.0.0.1:1234
Example (User Mode Linux compat.): Example (User Mode Linux compat.):
@ -2793,8 +2793,8 @@ SRST
.. parsed-literal:: .. parsed-literal::
# launch QEMU instance (note mcast address selected is UML's default) # launch QEMU instance (note mcast address selected is UML's default)
|qemu_system| linux.img \ |qemu_system| linux.img \\
-device e1000,netdev=n1,mac=52:54:00:12:34:56 \ -device e1000,netdev=n1,mac=52:54:00:12:34:56 \\
-netdev socket,id=n1,mcast=239.192.168.1:1102 -netdev socket,id=n1,mcast=239.192.168.1:1102
# launch UML # launch UML
/path/to/linux ubd0=/path/to/root_fs eth0=mcast /path/to/linux ubd0=/path/to/root_fs eth0=mcast
@ -2803,8 +2803,8 @@ SRST
.. parsed-literal:: .. parsed-literal::
|qemu_system| linux.img \ |qemu_system| linux.img \\
-device e1000,netdev=n1,mac=52:54:00:12:34:56 \ -device e1000,netdev=n1,mac=52:54:00:12:34:56 \\
-netdev socket,id=n1,mcast=239.192.168.1:1102,localaddr=1.2.3.4 -netdev socket,id=n1,mcast=239.192.168.1:1102,localaddr=1.2.3.4
``-netdev l2tpv3,id=id,src=srcaddr,dst=dstaddr[,srcport=srcport][,dstport=dstport],txsession=txsession[,rxsession=rxsession][,ipv6][,udp][,cookie64][,counter][,pincounter][,txcookie=txcookie][,rxcookie=rxcookie][,offset=offset]`` ``-netdev l2tpv3,id=id,src=srcaddr,dst=dstaddr[,srcport=srcport][,dstport=dstport],txsession=txsession[,rxsession=rxsession][,ipv6][,udp][,cookie64][,counter][,pincounter][,txcookie=txcookie][,rxcookie=rxcookie][,offset=offset]``
@ -2860,9 +2860,9 @@ SRST
# Setup tunnel on linux host using raw ip as encapsulation # Setup tunnel on linux host using raw ip as encapsulation
# on 1.2.3.4 # on 1.2.3.4
ip l2tp add tunnel remote 4.3.2.1 local 1.2.3.4 tunnel_id 1 peer_tunnel_id 1 \ ip l2tp add tunnel remote 4.3.2.1 local 1.2.3.4 tunnel_id 1 peer_tunnel_id 1 \\
encap udp udp_sport 16384 udp_dport 16384 encap udp udp_sport 16384 udp_dport 16384
ip l2tp add session tunnel_id 1 name vmtunnel0 session_id \ ip l2tp add session tunnel_id 1 name vmtunnel0 session_id \\
0xFFFFFFFF peer_session_id 0xFFFFFFFF 0xFFFFFFFF peer_session_id 0xFFFFFFFF
ifconfig vmtunnel0 mtu 1500 ifconfig vmtunnel0 mtu 1500
ifconfig vmtunnel0 up ifconfig vmtunnel0 up
@ -2872,7 +2872,7 @@ SRST
# on 4.3.2.1 # on 4.3.2.1
# launch QEMU instance - if your network has reorder or is very lossy add ,pincounter # launch QEMU instance - if your network has reorder or is very lossy add ,pincounter
|qemu_system| linux.img -device e1000,netdev=n1 \ |qemu_system| linux.img -device e1000,netdev=n1 \\
-netdev l2tpv3,id=n1,src=4.2.3.1,dst=1.2.3.4,udp,srcport=16384,dstport=16384,rxsession=0xffffffff,txsession=0xffffffff,counter -netdev l2tpv3,id=n1,src=4.2.3.1,dst=1.2.3.4,udp,srcport=16384,dstport=16384,rxsession=0xffffffff,txsession=0xffffffff,counter
``-netdev vde,id=id[,sock=socketpath][,port=n][,group=groupname][,mode=octalmode]`` ``-netdev vde,id=id[,sock=socketpath][,port=n][,group=groupname][,mode=octalmode]``
@ -4627,8 +4627,8 @@ SRST
.. parsed-literal:: .. parsed-literal::
# |qemu_system| \ # |qemu_system| \\
-object tls-cipher-suites,id=mysuite0,priority=@SYSTEM \ -object tls-cipher-suites,id=mysuite0,priority=@SYSTEM \\
-fw_cfg name=etc/edk2/https/ciphers,gen_id=mysuite0 -fw_cfg name=etc/edk2/https/ciphers,gen_id=mysuite0
``-object filter-buffer,id=id,netdev=netdevid,interval=t[,queue=all|rx|tx][,status=on|off][,position=head|tail|id=<id>][,insert=behind|before]`` ``-object filter-buffer,id=id,netdev=netdevid,interval=t[,queue=all|rx|tx][,status=on|off][,position=head|tail|id=<id>][,insert=behind|before]``
@ -4791,10 +4791,10 @@ SRST
.. parsed-literal:: .. parsed-literal::
# |qemu_system| \ # |qemu_system| \\
[...] \ [...] \\
-object cryptodev-backend-builtin,id=cryptodev0 \ -object cryptodev-backend-builtin,id=cryptodev0 \\
-device virtio-crypto-pci,id=crypto0,cryptodev=cryptodev0 \ -device virtio-crypto-pci,id=crypto0,cryptodev=cryptodev0 \\
[...] [...]
``-object cryptodev-vhost-user,id=id,chardev=chardevid[,queues=queues]`` ``-object cryptodev-vhost-user,id=id,chardev=chardevid[,queues=queues]``
@ -4810,11 +4810,11 @@ SRST
.. parsed-literal:: .. parsed-literal::
# |qemu_system| \ # |qemu_system| \\
[...] \ [...] \\
-chardev socket,id=chardev0,path=/path/to/socket \ -chardev socket,id=chardev0,path=/path/to/socket \\
-object cryptodev-vhost-user,id=cryptodev0,chardev=chardev0 \ -object cryptodev-vhost-user,id=cryptodev0,chardev=chardev0 \\
-device virtio-crypto-pci,id=crypto0,cryptodev=cryptodev0 \ -device virtio-crypto-pci,id=crypto0,cryptodev=cryptodev0 \\
[...] [...]
``-object secret,id=id,data=string,format=raw|base64[,keyid=secretid,iv=string]`` ``-object secret,id=id,data=string,format=raw|base64[,keyid=secretid,iv=string]``
@ -4892,9 +4892,9 @@ SRST
.. parsed-literal:: .. parsed-literal::
# |qemu_system| \ # |qemu_system| \\
-object secret,id=secmaster0,format=base64,file=key.b64 \ -object secret,id=secmaster0,format=base64,file=key.b64 \\
-object secret,id=sec0,keyid=secmaster0,format=base64,\ -object secret,id=sec0,keyid=secmaster0,format=base64,\\
data=$SECRET,iv=$(<iv.b64) data=$SECRET,iv=$(<iv.b64)
``-object sev-guest,id=id,cbitpos=cbitpos,reduced-phys-bits=val,[sev-device=string,policy=policy,handle=handle,dh-cert-file=file,session-file=file]`` ``-object sev-guest,id=id,cbitpos=cbitpos,reduced-phys-bits=val,[sev-device=string,policy=policy,handle=handle,dh-cert-file=file,session-file=file]``
@ -4941,10 +4941,10 @@ SRST
.. parsed-literal:: .. parsed-literal::
# |qemu_system_x86| \ # |qemu_system_x86| \\
...... ...... \\
-object sev-guest,id=sev0,cbitpos=47,reduced-phys-bits=5 \ -object sev-guest,id=sev0,cbitpos=47,reduced-phys-bits=5 \\
-machine ...,memory-encryption=sev0 -machine ...,memory-encryption=sev0 \\
..... .....
``-object authz-simple,id=id,identity=string`` ``-object authz-simple,id=id,identity=string``
@ -4962,9 +4962,9 @@ SRST
.. parsed-literal:: .. parsed-literal::
# |qemu_system| \ # |qemu_system| \\
... ... \\
-object 'authz-simple,id=auth0,identity=CN=laptop.example.com,,O=Example Org,,L=London,,ST=London,,C=GB' \ -object 'authz-simple,id=auth0,identity=CN=laptop.example.com,,O=Example Org,,L=London,,ST=London,,C=GB' \\
... ...
Note the use of quotes due to the x509 distinguished name Note the use of quotes due to the x509 distinguished name
@ -5013,9 +5013,9 @@ SRST
.. parsed-literal:: .. parsed-literal::
# |qemu_system| \ # |qemu_system| \\
... ... \\
-object authz-simple,id=auth0,filename=/etc/qemu/vnc-sasl.acl,refresh=yes -object authz-simple,id=auth0,filename=/etc/qemu/vnc-sasl.acl,refresh=yes \\
... ...
``-object authz-pam,id=id,service=string`` ``-object authz-pam,id=id,service=string``
@ -5032,9 +5032,9 @@ SRST
.. parsed-literal:: .. parsed-literal::
# |qemu_system| \ # |qemu_system| \\
... ... \\
-object authz-pam,id=auth0,service=qemu-vnc -object authz-pam,id=auth0,service=qemu-vnc \\
... ...
There would then be a corresponding config file for PAM at There would then be a corresponding config file for PAM at