mirrors/qemu
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

hw/ide/ahci: simplify and document PxCI handling

Browse Source 
The AHCI spec states that:
For NCQ, PxCI is cleared on command queued successfully.

For non-NCQ, PxCI is cleared on command completed successfully.
(A non-NCQ command that completes with error does not clear PxCI.)

The current QEMU implementation either clears PxCI in check_cmd(),
or in ahci_cmd_done().

check_cmd() will clear PxCI for a command if handle_cmd() returns 0.
handle_cmd() will return -1 if BUSY or DRQ is set.

The QEMU implementation for NCQ commands will currently not set BUSY
or DRQ, so they will always have PxCI cleared by handle_cmd().
ahci_cmd_done() will never even get called for NCQ commands.

Non-NCQ commands are executed by ide_bus_exec_cmd().
Non-NCQ commands in QEMU are implemented either in a sync or in an async
way.

For non-NCQ commands implemented in a sync way, the command handler will
return true, and when ide_bus_exec_cmd() sees that a command handler
returns true, it will call ide_cmd_done() (which will call
ahci_cmd_done()). For a command implemented in a sync way,
ahci_cmd_done() will do nothing (since busy_slot is not set). Instead,
after ide_bus_exec_cmd() has finished, check_cmd() will clear PxCI for
these commands.

For non-NCQ commands implemented in an async way (using either aiocb or
pio_aiocb), the command handler will return false, ide_bus_exec_cmd()
will not call ide_cmd_done(), instead it is expected that the async
callback function will call ide_cmd_done() once the async command is
done. handle_cmd() will set busy_slot, if and only if BUSY or DRQ is
set, and this is checked _after_ ide_bus_exec_cmd() has returned.
handle_cmd() will return -1, so check_cmd() will not clear PxCI.
When the async callback calls ide_cmd_done() (which will call
ahci_cmd_done()), it will see that busy_slot is set, and
ahci_cmd_done() will clear PxCI.

This seems racy, since busy_slot is set _after_ ide_bus_exec_cmd() has
returned. The callback might come before busy_slot gets set. And it is
quite confusing that ahci_cmd_done() will be called for all non-NCQ
commands when the command is done, but will only clear PxCI in certain
cases, even though it will always write a D2H FIS and raise an IRQ.

Even worse, in the case where ahci_cmd_done() does not clear PxCI, it
still raises an IRQ. Host software might thus read an old PxCI value,
since PxCI is cleared (by check_cmd()) after the IRQ has been raised.

Try to simplify this by always setting busy_slot for non-NCQ commands,
such that ahci_cmd_done() will always be responsible for clearing PxCI
for non-NCQ commands.

For NCQ commands, clear PxCI when we receive the D2H FIS, but before
raising the IRQ, see AHCI 1.3.1, section 5.3.8, states RegFIS:Entry and
RegFIS:ClearCI.

Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Message-id: 20230609140844.202795-5-nks@flawful.org
Signed-off-by: John Snow <jsnow@redhat.com>
(cherry picked from commit e2a5d9b3d9)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This commit is contained in:
Niklas Cassel 2023-06-09 16:08:40 +02:00 committed by Michael Tokarev
parent 131bf5d20d
commit 1e5ad6b06b
1 changed files with 50 additions and 20 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

70
hw/ide/ahci.c
View File

@ -40,9 +40,10 @@
#include "trace.h"
static void check_cmd(AHCIState *s, int port);
static int handle_cmd(AHCIState *s, int port, uint8_t slot);
static void handle_cmd(AHCIState *s, int port, uint8_t slot);
static void ahci_reset_port(AHCIState *s, int port);
static bool ahci_write_fis_d2h(AHCIDevice *ad, bool d2h_fis_i);
static void ahci_clear_cmd_issue(AHCIDevice *ad, uint8_t slot);
static void ahci_init_d2h(AHCIDevice *ad);
static int ahci_dma_prepare_buf(const IDEDMA *dma, int32_t limit);
static bool ahci_map_clb_address(AHCIDevice *ad);
@ -590,9 +591,8 @@ static void check_cmd(AHCIState *s, int port)
if ((pr->cmd & PORT_CMD_START) && pr->cmd_issue) {
for (slot = 0; (slot < 32) && pr->cmd_issue; slot++) {
if ((pr->cmd_issue & (1U << slot)) &&
!handle_cmd(s, port, slot)) {
pr->cmd_issue &= ~(1U << slot);
if (pr->cmd_issue & (1U << slot)) {
handle_cmd(s, port, slot);
}
}
}
@ -1122,6 +1122,22 @@ static void process_ncq_command(AHCIState *s, int port, const uint8_t *cmd_fis,
return;
}
/*
* A NCQ command clears the bit in PxCI after the command has been QUEUED
* successfully (ERROR not set, BUSY and DRQ cleared).
*
* For NCQ commands, PxCI will always be cleared here.
*
* (Once the NCQ command is COMPLETED, the device will send a SDB FIS with
* the interrupt bit set, which will clear PxSACT and raise an interrupt.)
*/
ahci_clear_cmd_issue(ad, slot);
/*
* In reality, for NCQ commands, PxCI is cleared after receiving a D2H FIS
* without the interrupt bit set, but since ahci_write_fis_d2h() can raise
* an IRQ on error, we need to call them in reverse order.
*/
ahci_write_fis_d2h(ad, false);
ncq_tfs->used = 1;
@ -1196,6 +1212,7 @@ static void handle_reg_h2d_fis(AHCIState *s, int port,
{
IDEState *ide_state = &s->dev[port].port.ifs[0];
AHCICmdHdr *cmd = get_cmd_header(s, port, slot);
AHCIDevice *ad = &s->dev[port];
uint16_t opts = le16_to_cpu(cmd->opts);
if (cmd_fis[1] & 0x0F) {
@ -1272,11 +1289,19 @@ static void handle_reg_h2d_fis(AHCIState *s, int port,
/* Reset transferred byte counter */
cmd->status = 0;
/*
* A non-NCQ command clears the bit in PxCI after the command has COMPLETED
* successfully (ERROR not set, BUSY and DRQ cleared).
*
* For non-NCQ commands, PxCI will always be cleared by ahci_cmd_done().
*/
ad->busy_slot = slot;
/* We're ready to process the command in FIS byte 2. */
ide_exec_cmd(&s->dev[port].port, cmd_fis[2]);
}
static int handle_cmd(AHCIState *s, int port, uint8_t slot)
static void handle_cmd(AHCIState *s, int port, uint8_t slot)
{
IDEState *ide_state;
uint64_t tbl_addr;
@ -1287,12 +1312,12 @@ static int handle_cmd(AHCIState *s, int port, uint8_t slot)
if (s->dev[port].port.ifs[0].status & (BUSY_STAT|DRQ_STAT)) {
/* Engine currently busy, try again later */
trace_handle_cmd_busy(s, port);
return -1;
return;
}
if (!s->dev[port].lst) {
trace_handle_cmd_nolist(s, port);
return -1;
return;
}
cmd = get_cmd_header(s, port, slot);
/* remember current slot handle for later */
@ -1302,7 +1327,7 @@ static int handle_cmd(AHCIState *s, int port, uint8_t slot)
ide_state = &s->dev[port].port.ifs[0];
if (!ide_state->blk) {
trace_handle_cmd_badport(s, port);
return -1;
return;
}
tbl_addr = le64_to_cpu(cmd->tbl_addr);
@ -1311,7 +1336,7 @@ static int handle_cmd(AHCIState *s, int port, uint8_t slot)
DMA_DIRECTION_TO_DEVICE, MEMTXATTRS_UNSPECIFIED);
if (!cmd_fis) {
trace_handle_cmd_badfis(s, port);
return -1;
return;
} else if (cmd_len != 0x80) {
ahci_trigger_irq(s, &s->dev[port], AHCI_PORT_IRQ_BIT_HBFS);
trace_handle_cmd_badmap(s, port, cmd_len);
@ -1335,15 +1360,6 @@ static int handle_cmd(AHCIState *s, int port, uint8_t slot)
out:
dma_memory_unmap(s->as, cmd_fis, cmd_len, DMA_DIRECTION_TO_DEVICE,
cmd_len);
if (s->dev[port].port.ifs[0].status & (BUSY_STAT|DRQ_STAT)) {
/* async command, complete later */
s->dev[port].busy_slot = slot;
return -1;
}
/* done handling the command */
return 0;
}
/* Transfer PIO data between RAM and device */
@ -1497,6 +1513,16 @@ static int ahci_dma_rw_buf(const IDEDMA *dma, bool is_write)
return 1;
}
static void ahci_clear_cmd_issue(AHCIDevice *ad, uint8_t slot)
{
IDEState *ide_state = &ad->port.ifs[0];
if (!(ide_state->status & (BUSY_STAT | DRQ_STAT))) {
ad->port_regs.cmd_issue &= ~(1 << slot);
}
}
/* Non-NCQ command is done - This function is never called for NCQ commands. */
static void ahci_cmd_done(const IDEDMA *dma)
{
AHCIDevice *ad = DO_UPCAST(AHCIDevice, dma, dma);
@ -1505,11 +1531,15 @@ static void ahci_cmd_done(const IDEDMA *dma)
/* no longer busy */
if (ad->busy_slot != -1) {
ad->port_regs.cmd_issue &= ~(1 << ad->busy_slot);
ahci_clear_cmd_issue(ad, ad->busy_slot);
ad->busy_slot = -1;
}
/* update d2h status */
/*
* In reality, for non-NCQ commands, PxCI is cleared after receiving a D2H
* FIS with the interrupt bit set, but since ahci_write_fis_d2h() will raise
* an IRQ, we need to call them in reverse order.
*/
ahci_write_fis_d2h(ad, true);
if (ad->port_regs.cmd_issue && !ad->check_bh) {