hw/intc: openpic: Clean up the styles

Correct the multi-line comment format. No functional changes.

Signed-off-by: Bin Meng <bin.meng@windriver.com>

Message-Id: <20210918032653.646370-3-bin.meng@windriver.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This commit is contained in:
Bin Meng 2021-09-18 11:26:53 +08:00 committed by David Gibson
parent 86229b68a2
commit 06caae8af0
2 changed files with 40 additions and 24 deletions

View File

@ -47,7 +47,7 @@
#include "qemu/timer.h"
#include "qemu/error-report.h"
//#define DEBUG_OPENPIC
/* #define DEBUG_OPENPIC */
#ifdef DEBUG_OPENPIC
static const int debug_openpic = 1;
@ -118,7 +118,8 @@ static FslMpicInfo fsl_mpic_42 = {
#define ILR_INTTGT_CINT 0x01 /* critical */
#define ILR_INTTGT_MCP 0x02 /* machine check */
/* The currently supported INTTGT values happen to be the same as QEMU's
/*
* The currently supported INTTGT values happen to be the same as QEMU's
* openpic output codes, but don't depend on this. The output codes
* could change (unlikely, but...) or support could be added for
* more INTTGT values.
@ -177,10 +178,11 @@ static void openpic_cpu_write_internal(void *opaque, hwaddr addr,
uint32_t val, int idx);
static void openpic_reset(DeviceState *d);
/* Convert between openpic clock ticks and nanosecs. In the hardware the clock
frequency is driven by board inputs to the PIC which the PIC would then
divide by 4 or 8. For now hard code to 25MZ.
*/
/*
* Convert between openpic clock ticks and nanosecs. In the hardware the clock
* frequency is driven by board inputs to the PIC which the PIC would then
* divide by 4 or 8. For now hard code to 25MZ.
*/
#define OPENPIC_TIMER_FREQ_MHZ 25
#define OPENPIC_TIMER_NS_PER_TICK (1000 / OPENPIC_TIMER_FREQ_MHZ)
static inline uint64_t ns_to_ticks(uint64_t ns)
@ -253,7 +255,8 @@ static void IRQ_local_pipe(OpenPICState *opp, int n_CPU, int n_IRQ,
__func__, src->output, n_IRQ, active, was_active,
dst->outputs_active[src->output]);
/* On Freescale MPIC, critical interrupts ignore priority,
/*
* On Freescale MPIC, critical interrupts ignore priority,
* IACK, EOI, etc. Before MPIC v4.1 they also ignore
* masking.
*/
@ -276,7 +279,8 @@ static void IRQ_local_pipe(OpenPICState *opp, int n_CPU, int n_IRQ,
priority = IVPR_PRIORITY(src->ivpr);
/* Even if the interrupt doesn't have enough priority,
/*
* Even if the interrupt doesn't have enough priority,
* it is still raised, in case ctpr is lowered later.
*/
if (active) {
@ -408,7 +412,8 @@ static void openpic_set_irq(void *opaque, int n_IRQ, int level)
}
if (src->output != OPENPIC_OUTPUT_INT) {
/* Edge-triggered interrupts shouldn't be used
/*
* Edge-triggered interrupts shouldn't be used
* with non-INT delivery, but just in case,
* try to make it do something sane rather than
* cause an interrupt storm. This is close to
@ -501,7 +506,8 @@ static inline void write_IRQreg_ivpr(OpenPICState *opp, int n_IRQ, uint32_t val)
{
uint32_t mask;
/* NOTE when implementing newer FSL MPIC models: starting with v4.0,
/*
* NOTE when implementing newer FSL MPIC models: starting with v4.0,
* the polarity bit is read-only on internal interrupts.
*/
mask = IVPR_MASK_MASK | IVPR_PRIORITY_MASK | IVPR_SENSE_MASK |
@ -511,7 +517,8 @@ static inline void write_IRQreg_ivpr(OpenPICState *opp, int n_IRQ, uint32_t val)
opp->src[n_IRQ].ivpr =
(opp->src[n_IRQ].ivpr & IVPR_ACTIVITY_MASK) | (val & mask);
/* For FSL internal interrupts, The sense bit is reserved and zero,
/*
* For FSL internal interrupts, The sense bit is reserved and zero,
* and the interrupt is always level-triggered. Timers and IPIs
* have no sense or polarity bits, and are edge-triggered.
*/
@ -695,16 +702,20 @@ static void qemu_timer_cb(void *opaque)
openpic_set_irq(opp, n_IRQ, 0);
}
/* If enabled is true, arranges for an interrupt to be raised val clocks into
the future, if enabled is false cancels the timer. */
/*
* If enabled is true, arranges for an interrupt to be raised val clocks into
* the future, if enabled is false cancels the timer.
*/
static void openpic_tmr_set_tmr(OpenPICTimer *tmr, uint32_t val, bool enabled)
{
uint64_t ns = ticks_to_ns(val & ~TCCR_TOG);
/* A count of zero causes a timer to be set to expire immediately. This
effectively stops the simulation since the timer is constantly expiring
which prevents guest code execution, so we don't honor that
configuration. On real hardware, this situation would generate an
interrupt on every clock cycle if the interrupt was unmasked. */
/*
* A count of zero causes a timer to be set to expire immediately. This
* effectively stops the simulation since the timer is constantly expiring
* which prevents guest code execution, so we don't honor that
* configuration. On real hardware, this situation would generate an
* interrupt on every clock cycle if the interrupt was unmasked.
*/
if ((ns == 0) || !enabled) {
tmr->qemu_timer_active = false;
tmr->tccr = tmr->tccr & TCCR_TOG;
@ -717,8 +728,10 @@ static void openpic_tmr_set_tmr(OpenPICTimer *tmr, uint32_t val, bool enabled)
}
}
/* Returns the currrent tccr value, i.e., timer value (in clocks) with
appropriate TOG. */
/*
* Returns the currrent tccr value, i.e., timer value (in clocks) with
* appropriate TOG.
*/
static uint64_t openpic_tmr_get_timer(OpenPICTimer *tmr)
{
uint64_t retval;
@ -1309,7 +1322,7 @@ static void openpic_reset(DeviceState *d)
typedef struct MemReg {
const char *name;
MemoryRegionOps const *ops;
hwaddr start_addr;
hwaddr start_addr;
ram_addr_t size;
} MemReg;

View File

@ -51,7 +51,8 @@ typedef enum IRQType {
IRQ_TYPE_FSLSPECIAL, /* FSL timer/IPI interrupt, edge, no polarity */
} IRQType;
/* Round up to the nearest 64 IRQs so that the queue length
/*
* Round up to the nearest 64 IRQs so that the queue length
* won't change when moving between 32 and 64 bit hosts.
*/
#define IRQQUEUE_SIZE_BITS ((OPENPIC_MAX_IRQ + 63) & ~63)
@ -101,8 +102,10 @@ typedef struct OpenPICTimer {
bool qemu_timer_active; /* Is the qemu_timer is running? */
struct QEMUTimer *qemu_timer;
struct OpenPICState *opp; /* Device timer is part of. */
/* The QEMU_CLOCK_VIRTUAL time (in ns) corresponding to the last
current_count written or read, only defined if qemu_timer_active. */
/*
* The QEMU_CLOCK_VIRTUAL time (in ns) corresponding to the last
* current_count written or read, only defined if qemu_timer_active.
*/
uint64_t origin_time;
} OpenPICTimer;