mirrors/qemu
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
ff1758533c
qemu/hw/ide/ahci.c

1525 lines
46 KiB
C
Raw Normal View History

ahci: add ahci emulation This patch adds an emulation layer for an ICH-9 AHCI controller. For now this controller does not do IDE legacy emulation. It is a pure AHCI controller. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-14 03:34:40 +03:00
/*
* QEMU AHCI Emulation
*
* Copyright (c) 2010 qiaochong@loongson.cn
* Copyright (c) 2010 Roland Elek <elek.roland@gmail.com>
* Copyright (c) 2010 Sebastian Herbszt <herbszt@gmx.de>
* Copyright (c) 2010 Alexander Graf <agraf@suse.de>
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*
*
* lspci dump of a ICH-9 real device in IDE mode (hopefully close enough):
*
* 00:1f.2 SATA controller [0106]: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA AHCI Controller [8086:2922] (rev 02) (prog-if 01 [AHCI 1.0])
* Subsystem: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA AHCI Controller [8086:2922]
* Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
* Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
* Latency: 0
* Interrupt: pin B routed to IRQ 222
* Region 0: I/O ports at d000 [size=8]
* Region 1: I/O ports at cc00 [size=4]
* Region 2: I/O ports at c880 [size=8]
* Region 3: I/O ports at c800 [size=4]
* Region 4: I/O ports at c480 [size=32]
* Region 5: Memory at febf9000 (32-bit, non-prefetchable) [size=2K]
* Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Count=1/16 Enable+
* Address: fee0f00c Data: 41d9
* Capabilities: [70] Power Management version 3
* Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
* Status: D0 PME-Enable- DSel=0 DScale=0 PME-
* Capabilities: [a8] SATA HBA <?>
* Capabilities: [b0] Vendor Specific Information <?>
* Kernel driver in use: ahci
* Kernel modules: ahci
* 00: 86 80 22 29 07 04 b0 02 02 01 06 01 00 00 00 00
* 10: 01 d0 00 00 01 cc 00 00 81 c8 00 00 01 c8 00 00
* 20: 81 c4 00 00 00 90 bf fe 00 00 00 00 86 80 22 29
* 30: 00 00 00 00 80 00 00 00 00 00 00 00 0f 02 00 00
* 40: 00 80 00 80 00 00 00 00 00 00 00 00 00 00 00 00
* 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
* 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
* 70: 01 a8 03 40 08 00 00 00 00 00 00 00 00 00 00 00
* 80: 05 70 09 00 0c f0 e0 fe d9 41 00 00 00 00 00 00
* 90: 40 00 0f 82 93 01 00 00 00 00 00 00 00 00 00 00
* a0: ac 00 00 00 0a 00 12 00 12 b0 10 00 48 00 00 00
* b0: 09 00 06 20 00 00 00 00 00 00 00 00 00 00 00 00
* c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
* d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
* e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
* f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00
*
*/
#include <hw/hw.h>
#include <hw/msi.h>
#include <hw/pc.h>
#include <hw/pci.h>
#include "monitor.h"
#include "dma.h"
#include "cpu-common.h"
#include "blockdev.h"
#include "internal.h"
#include <hw/ide/pci.h>
/* #define DEBUG_AHCI */
#ifdef DEBUG_AHCI
#define DPRINTF(port, fmt, ...) \
do { fprintf(stderr, "ahci: %s: [%d] ", __FUNCTION__, port); \
fprintf(stderr, fmt, ## __VA_ARGS__); } while (0)
#else
#define DPRINTF(port, fmt, ...) do {} while(0)
#endif
#define AHCI_PCI_BAR 5
#define AHCI_MAX_PORTS 32
#define AHCI_MAX_SG 168 /* hardware max is 64K */
#define AHCI_DMA_BOUNDARY 0xffffffff
#define AHCI_USE_CLUSTERING 0
#define AHCI_MAX_CMDS 32
#define AHCI_CMD_SZ 32
#define AHCI_CMD_SLOT_SZ (AHCI_MAX_CMDS * AHCI_CMD_SZ)
#define AHCI_RX_FIS_SZ 256
#define AHCI_CMD_TBL_CDB 0x40
#define AHCI_CMD_TBL_HDR_SZ 0x80
#define AHCI_CMD_TBL_SZ (AHCI_CMD_TBL_HDR_SZ + (AHCI_MAX_SG * 16))
#define AHCI_CMD_TBL_AR_SZ (AHCI_CMD_TBL_SZ * AHCI_MAX_CMDS)
#define AHCI_PORT_PRIV_DMA_SZ (AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_AR_SZ + \
AHCI_RX_FIS_SZ)
#define AHCI_IRQ_ON_SG (1 << 31)
#define AHCI_CMD_ATAPI (1 << 5)
#define AHCI_CMD_WRITE (1 << 6)
#define AHCI_CMD_PREFETCH (1 << 7)
#define AHCI_CMD_RESET (1 << 8)
#define AHCI_CMD_CLR_BUSY (1 << 10)
#define RX_FIS_D2H_REG 0x40 /* offset of D2H Register FIS data */
#define RX_FIS_SDB 0x58 /* offset of SDB FIS data */
#define RX_FIS_UNK 0x60 /* offset of Unknown FIS data */
/* global controller registers */
#define HOST_CAP 0x00 /* host capabilities */
#define HOST_CTL 0x04 /* global host control */
#define HOST_IRQ_STAT 0x08 /* interrupt status */
#define HOST_PORTS_IMPL 0x0c /* bitmap of implemented ports */
#define HOST_VERSION 0x10 /* AHCI spec. version compliancy */
/* HOST_CTL bits */
#define HOST_CTL_RESET (1 << 0) /* reset controller; self-clear */
#define HOST_CTL_IRQ_EN (1 << 1) /* global IRQ enable */
#define HOST_CTL_AHCI_EN (1 << 31) /* AHCI enabled */
/* HOST_CAP bits */
#define HOST_CAP_SSC (1 << 14) /* Slumber capable */
#define HOST_CAP_AHCI (1 << 18) /* AHCI only */
#define HOST_CAP_CLO (1 << 24) /* Command List Override support */
#define HOST_CAP_SSS (1 << 27) /* Staggered Spin-up */
#define HOST_CAP_NCQ (1 << 30) /* Native Command Queueing */
#define HOST_CAP_64 (1 << 31) /* PCI DAC (64-bit DMA) support */
/* registers for each SATA port */
#define PORT_LST_ADDR 0x00 /* command list DMA addr */
#define PORT_LST_ADDR_HI 0x04 /* command list DMA addr hi */
#define PORT_FIS_ADDR 0x08 /* FIS rx buf addr */
#define PORT_FIS_ADDR_HI 0x0c /* FIS rx buf addr hi */
#define PORT_IRQ_STAT 0x10 /* interrupt status */
#define PORT_IRQ_MASK 0x14 /* interrupt enable/disable mask */
#define PORT_CMD 0x18 /* port command */
#define PORT_TFDATA 0x20 /* taskfile data */
#define PORT_SIG 0x24 /* device TF signature */
#define PORT_SCR_STAT 0x28 /* SATA phy register: SStatus */
#define PORT_SCR_CTL 0x2c /* SATA phy register: SControl */
#define PORT_SCR_ERR 0x30 /* SATA phy register: SError */
#define PORT_SCR_ACT 0x34 /* SATA phy register: SActive */
#define PORT_CMD_ISSUE 0x38 /* command issue */
#define PORT_RESERVED 0x3c /* reserved */
/* PORT_IRQ_{STAT,MASK} bits */
#define PORT_IRQ_COLD_PRES (1 << 31) /* cold presence detect */
#define PORT_IRQ_TF_ERR (1 << 30) /* task file error */
#define PORT_IRQ_HBUS_ERR (1 << 29) /* host bus fatal error */
#define PORT_IRQ_HBUS_DATA_ERR (1 << 28) /* host bus data error */
#define PORT_IRQ_IF_ERR (1 << 27) /* interface fatal error */
#define PORT_IRQ_IF_NONFATAL (1 << 26) /* interface non-fatal error */
#define PORT_IRQ_OVERFLOW (1 << 24) /* xfer exhausted available S/G */
#define PORT_IRQ_BAD_PMP (1 << 23) /* incorrect port multiplier */
#define PORT_IRQ_PHYRDY (1 << 22) /* PhyRdy changed */
#define PORT_IRQ_DEV_ILCK (1 << 7) /* device interlock */
#define PORT_IRQ_CONNECT (1 << 6) /* port connect change status */
#define PORT_IRQ_SG_DONE (1 << 5) /* descriptor processed */
#define PORT_IRQ_UNK_FIS (1 << 4) /* unknown FIS rx'd */
#define PORT_IRQ_SDB_FIS (1 << 3) /* Set Device Bits FIS rx'd */
#define PORT_IRQ_DMAS_FIS (1 << 2) /* DMA Setup FIS rx'd */
#define PORT_IRQ_PIOS_FIS (1 << 1) /* PIO Setup FIS rx'd */
#define PORT_IRQ_D2H_REG_FIS (1 << 0) /* D2H Register FIS rx'd */
#define PORT_IRQ_FREEZE (PORT_IRQ_HBUS_ERR | PORT_IRQ_IF_ERR | \
PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY | \
PORT_IRQ_UNK_FIS)
#define PORT_IRQ_ERROR (PORT_IRQ_FREEZE | PORT_IRQ_TF_ERR | \
PORT_IRQ_HBUS_DATA_ERR)
#define DEF_PORT_IRQ (PORT_IRQ_ERROR | PORT_IRQ_SG_DONE | \
PORT_IRQ_SDB_FIS | PORT_IRQ_DMAS_FIS | \
PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS)
/* PORT_CMD bits */
#define PORT_CMD_ATAPI (1 << 24) /* Device is ATAPI */
#define PORT_CMD_LIST_ON (1 << 15) /* cmd list DMA engine running */
#define PORT_CMD_FIS_ON (1 << 14) /* FIS DMA engine running */
#define PORT_CMD_FIS_RX (1 << 4) /* Enable FIS receive DMA engine */
#define PORT_CMD_CLO (1 << 3) /* Command list override */
#define PORT_CMD_POWER_ON (1 << 2) /* Power up device */
#define PORT_CMD_SPIN_UP (1 << 1) /* Spin up device */
#define PORT_CMD_START (1 << 0) /* Enable port DMA engine */
#define PORT_CMD_ICC_MASK (0xf << 28) /* i/f ICC state mask */
#define PORT_CMD_ICC_ACTIVE (0x1 << 28) /* Put i/f in active state */
#define PORT_CMD_ICC_PARTIAL (0x2 << 28) /* Put i/f in partial state */
#define PORT_CMD_ICC_SLUMBER (0x6 << 28) /* Put i/f in slumber state */
#define PORT_IRQ_STAT_DHRS (1 << 0) /* Device to Host Register FIS */
#define PORT_IRQ_STAT_PSS (1 << 1) /* PIO Setup FIS */
#define PORT_IRQ_STAT_DSS (1 << 2) /* DMA Setup FIS */
#define PORT_IRQ_STAT_SDBS (1 << 3) /* Set Device Bits */
#define PORT_IRQ_STAT_UFS (1 << 4) /* Unknown FIS */
#define PORT_IRQ_STAT_DPS (1 << 5) /* Descriptor Processed */
#define PORT_IRQ_STAT_PCS (1 << 6) /* Port Connect Change Status */
#define PORT_IRQ_STAT_DMPS (1 << 7) /* Device Mechanical Presence
Status */
#define PORT_IRQ_STAT_PRCS (1 << 22) /* File Ready Status */
#define PORT_IRQ_STAT_IPMS (1 << 23) /* Incorrect Port Multiplier
Status */
#define PORT_IRQ_STAT_OFS (1 << 24) /* Overflow Status */
#define PORT_IRQ_STAT_INFS (1 << 26) /* Interface Non-Fatal Error
Status */
#define PORT_IRQ_STAT_IFS (1 << 27) /* Interface Fatal Error */
#define PORT_IRQ_STAT_HBDS (1 << 28) /* Host Bus Data Error Status */
#define PORT_IRQ_STAT_HBFS (1 << 29) /* Host Bus Fatal Error Status */
#define PORT_IRQ_STAT_TFES (1 << 30) /* Task File Error Status */
#define PORT_IRQ_STAT_CPDS (1 << 31) /* Code Port Detect Status */
/* ap->flags bits */
#define AHCI_FLAG_NO_NCQ (1 << 24)
#define AHCI_FLAG_IGN_IRQ_IF_ERR (1 << 25) /* ignore IRQ_IF_ERR */
#define AHCI_FLAG_HONOR_PI (1 << 26) /* honor PORTS_IMPL */
#define AHCI_FLAG_IGN_SERR_INTERNAL (1 << 27) /* ignore SERR_INTERNAL */
#define AHCI_FLAG_32BIT_ONLY (1 << 28) /* force 32bit */
#define ATA_SRST (1 << 2) /* software reset */
#define STATE_RUN 0
#define STATE_RESET 1
#define SATA_SCR_SSTATUS_DET_NODEV 0x0
#define SATA_SCR_SSTATUS_DET_DEV_PRESENT_PHY_UP 0x3
#define SATA_SCR_SSTATUS_SPD_NODEV 0x00
#define SATA_SCR_SSTATUS_SPD_GEN1 0x10
#define SATA_SCR_SSTATUS_IPM_NODEV 0x000
#define SATA_SCR_SSTATUS_IPM_ACTIVE 0X100
#define AHCI_SCR_SCTL_DET 0xf
#define SATA_FIS_TYPE_REGISTER_H2D 0x27
#define SATA_FIS_REG_H2D_UPDATE_COMMAND_REGISTER 0x80
#define AHCI_CMD_HDR_CMD_FIS_LEN 0x1f
#define AHCI_CMD_HDR_PRDT_LEN 16
#define SATA_SIGNATURE_CDROM 0xeb140000
#define SATA_SIGNATURE_DISK 0x00000101
#define AHCI_GENERIC_HOST_CONTROL_REGS_MAX_ADDR 0x20
/* Shouldn't this be 0x2c? */
#define SATA_PORTS 4
#define AHCI_PORT_REGS_START_ADDR 0x100
#define AHCI_PORT_REGS_END_ADDR (AHCI_PORT_REGS_START_ADDR + SATA_PORTS * 0x80)
#define AHCI_PORT_ADDR_OFFSET_MASK 0x7f
#define AHCI_NUM_COMMAND_SLOTS 31
#define AHCI_SUPPORTED_SPEED 20
#define AHCI_SUPPORTED_SPEED_GEN1 1
#define AHCI_VERSION_1_0 0x10000
#define AHCI_PROGMODE_MAJOR_REV_1 1
#define AHCI_COMMAND_TABLE_ACMD 0x40
#define IDE_FEATURE_DMA 1
#define READ_FPDMA_QUEUED 0x60
#define WRITE_FPDMA_QUEUED 0x61
#define RES_FIS_DSFIS 0x00
#define RES_FIS_PSFIS 0x20
#define RES_FIS_RFIS 0x40
#define RES_FIS_SDBFIS 0x58
#define RES_FIS_UFIS 0x60
typedef struct AHCIControlRegs {
uint32_t cap;
uint32_t ghc;
uint32_t irqstatus;
uint32_t impl;
uint32_t version;
} AHCIControlRegs;
typedef struct AHCIPortRegs {
uint32_t lst_addr;
uint32_t lst_addr_hi;
uint32_t fis_addr;
uint32_t fis_addr_hi;
uint32_t irq_stat;
uint32_t irq_mask;
uint32_t cmd;
uint32_t unused0;
uint32_t tfdata;
uint32_t sig;
uint32_t scr_stat;
uint32_t scr_ctl;
uint32_t scr_err;
uint32_t scr_act;
uint32_t cmd_issue;
uint32_t reserved;
} AHCIPortRegs;
typedef struct AHCICmdHdr {
uint32_t opts;
uint32_t status;
uint64_t tbl_addr;
uint32_t reserved[4];
} __attribute__ ((packed)) AHCICmdHdr;
typedef struct AHCI_SG {
uint64_t addr;
uint32_t reserved;
uint32_t flags_size;
} __attribute__ ((packed)) AHCI_SG;
typedef struct AHCIDevice AHCIDevice;
typedef struct NCQTransferState {
AHCIDevice *drive;
BlockDriverAIOCB *aiocb;
QEMUSGList sglist;
int is_read;
uint16_t sector_count;
uint64_t lba;
uint8_t tag;
int slot;
int used;
} NCQTransferState;
struct AHCIDevice {
IDEDMA dma;
IDEBus port;
int port_no;
uint32_t port_state;
uint32_t finished;
AHCIPortRegs port_regs;
struct AHCIState *hba;
QEMUBH *check_bh;
uint8_t *lst;
uint8_t *res_fis;
int dma_status;
int done_atapi_packet;
int busy_slot;
BlockDriverCompletionFunc *dma_cb;
AHCICmdHdr *cur_cmd;
NCQTransferState ncq_tfs[AHCI_MAX_CMDS];
};
typedef struct AHCIState {
AHCIDevice dev[SATA_PORTS];
AHCIControlRegs control_regs;
int mem;
qemu_irq irq;
} AHCIState;
typedef struct AHCIPCIState {
PCIDevice card;
AHCIState ahci;
} AHCIPCIState;
typedef struct NCQFrame {
uint8_t fis_type;
uint8_t c;
uint8_t command;
uint8_t sector_count_low;
uint8_t lba0;
uint8_t lba1;
uint8_t lba2;
uint8_t fua;
uint8_t lba3;
uint8_t lba4;
uint8_t lba5;
uint8_t sector_count_high;
uint8_t tag;
uint8_t reserved5;
uint8_t reserved6;
uint8_t control;
uint8_t reserved7;
uint8_t reserved8;
uint8_t reserved9;
uint8_t reserved10;
} __attribute__ ((packed)) NCQFrame;
static void check_cmd(AHCIState *s, int port);
static int handle_cmd(AHCIState *s,int port,int slot);
static void ahci_reset_port(AHCIState *s, int port);
static void ahci_write_fis_d2h(AHCIDevice *ad, uint8_t *cmd_fis);
static uint32_t ahci_port_read(AHCIState *s, int port, int offset)
{
uint32_t val;
AHCIPortRegs *pr;
pr = &s->dev[port].port_regs;
switch (offset) {
case PORT_LST_ADDR:
val = pr->lst_addr;
break;
case PORT_LST_ADDR_HI:
val = pr->lst_addr_hi;
break;
case PORT_FIS_ADDR:
val = pr->fis_addr;
break;
case PORT_FIS_ADDR_HI:
val = pr->fis_addr_hi;
break;
case PORT_IRQ_STAT:
val = pr->irq_stat;
break;
case PORT_IRQ_MASK:
val = pr->irq_mask;
break;
case PORT_CMD:
val = pr->cmd;
break;
case PORT_TFDATA:
val = ((uint16_t)s->dev[port].port.ifs[0].error << 8) |
s->dev[port].port.ifs[0].status;
break;
case PORT_SIG:
val = pr->sig;
break;
case PORT_SCR_STAT:
if (s->dev[port].port.ifs[0].bs) {
val = SATA_SCR_SSTATUS_DET_DEV_PRESENT_PHY_UP |
SATA_SCR_SSTATUS_SPD_GEN1 | SATA_SCR_SSTATUS_IPM_ACTIVE;
} else {
val = SATA_SCR_SSTATUS_DET_NODEV;
}
break;
case PORT_SCR_CTL:
val = pr->scr_ctl;
break;
case PORT_SCR_ERR:
val = pr->scr_err;
break;
case PORT_SCR_ACT:
pr->scr_act &= ~s->dev[port].finished;
s->dev[port].finished = 0;
val = pr->scr_act;
break;
case PORT_CMD_ISSUE:
val = pr->cmd_issue;
break;
case PORT_RESERVED:
default:
val = 0;
}
DPRINTF(port, "offset: 0x%x val: 0x%x\n", offset, val);
return val;
}
static void ahci_irq_raise(AHCIState *s, AHCIDevice *dev)
{
struct AHCIPCIState *d = container_of(s, AHCIPCIState, ahci);
DPRINTF(0, "raise irq\n");
if (msi_enabled(&d->card)) {
msi_notify(&d->card, 0);
} else {
qemu_irq_raise(s->irq);
}
}
static void ahci_irq_lower(AHCIState *s, AHCIDevice *dev)
{
struct AHCIPCIState *d = container_of(s, AHCIPCIState, ahci);
DPRINTF(0, "lower irq\n");
if (!msi_enabled(&d->card)) {
qemu_irq_lower(s->irq);
}
}
static void ahci_check_irq(AHCIState *s)
{
int i;
DPRINTF(-1, "check irq %#x\n", s->control_regs.irqstatus);
for (i = 0; i < SATA_PORTS; i++) {
AHCIPortRegs *pr = &s->dev[i].port_regs;
if (pr->irq_stat & pr->irq_mask) {
s->control_regs.irqstatus |= (1 << i);
}
}
if (s->control_regs.irqstatus &&
(s->control_regs.ghc & HOST_CTL_IRQ_EN)) {
ahci_irq_raise(s, NULL);
} else {
ahci_irq_lower(s, NULL);
}
}
static void ahci_trigger_irq(AHCIState *s, AHCIDevice *d,
int irq_type)
{
DPRINTF(d->port_no, "trigger irq %#x -> %x\n",
irq_type, d->port_regs.irq_mask & irq_type);
d->port_regs.irq_stat |= irq_type;
ahci_check_irq(s);
}
static void map_page(uint8_t **ptr, uint64_t addr, uint32_t wanted)
{
target_phys_addr_t len = wanted;
if (*ptr) {
cpu_physical_memory_unmap(*ptr, 1, len, len);
}
*ptr = cpu_physical_memory_map(addr, &len, 1);
if (len < wanted) {
cpu_physical_memory_unmap(*ptr, 1, len, len);
*ptr = NULL;
}
}
static void ahci_port_write(AHCIState *s, int port, int offset, uint32_t val)
{
AHCIPortRegs *pr = &s->dev[port].port_regs;
DPRINTF(port, "offset: 0x%x val: 0x%x\n", offset, val);
switch (offset) {
case PORT_LST_ADDR:
pr->lst_addr = val;
map_page(&s->dev[port].lst,
((uint64_t)pr->lst_addr_hi << 32) | pr->lst_addr, 1024);
s->dev[port].cur_cmd = NULL;
break;
case PORT_LST_ADDR_HI:
pr->lst_addr_hi = val;
map_page(&s->dev[port].lst,
((uint64_t)pr->lst_addr_hi << 32) | pr->lst_addr, 1024);
s->dev[port].cur_cmd = NULL;
break;
case PORT_FIS_ADDR:
pr->fis_addr = val;
map_page(&s->dev[port].res_fis,
((uint64_t)pr->fis_addr_hi << 32) | pr->fis_addr, 256);
break;
case PORT_FIS_ADDR_HI:
pr->fis_addr_hi = val;
map_page(&s->dev[port].res_fis,
((uint64_t)pr->fis_addr_hi << 32) | pr->fis_addr, 256);
break;
case PORT_IRQ_STAT:
pr->irq_stat &= ~val;
break;
case PORT_IRQ_MASK:
pr->irq_mask = val & 0xfdc000ff;
ahci_check_irq(s);
break;
case PORT_CMD:
pr->cmd = val & ~(PORT_CMD_LIST_ON | PORT_CMD_FIS_ON);
if (pr->cmd & PORT_CMD_START) {
pr->cmd |= PORT_CMD_LIST_ON;
}
if (pr->cmd & PORT_CMD_FIS_RX) {
pr->cmd |= PORT_CMD_FIS_ON;
}
check_cmd(s, port);
break;
case PORT_TFDATA:
s->dev[port].port.ifs[0].error = (val >> 8) & 0xff;
s->dev[port].port.ifs[0].status = val & 0xff;
break;
case PORT_SIG:
pr->sig = val;
break;
case PORT_SCR_STAT:
pr->scr_stat = val;
break;
case PORT_SCR_CTL:
if (((pr->scr_ctl & AHCI_SCR_SCTL_DET) == 1) &&
((val & AHCI_SCR_SCTL_DET) == 0)) {
ahci_reset_port(s, port);
}
pr->scr_ctl = val;
break;
case PORT_SCR_ERR:
pr->scr_err &= ~val;
break;
case PORT_SCR_ACT:
/* RW1 */
pr->scr_act |= val;
break;
case PORT_CMD_ISSUE:
pr->cmd_issue |= val;
check_cmd(s, port);
break;
default:
break;
}
}
static uint32_t ahci_mem_readl(void *ptr, target_phys_addr_t addr)
{
AHCIState *s = ptr;
uint32_t val = 0;
addr = addr & 0xfff;
if (addr < AHCI_GENERIC_HOST_CONTROL_REGS_MAX_ADDR) {
switch (addr) {
case HOST_CAP:
val = s->control_regs.cap;
break;
case HOST_CTL:
val = s->control_regs.ghc;
break;
case HOST_IRQ_STAT:
val = s->control_regs.irqstatus;
break;
case HOST_PORTS_IMPL:
val = s->control_regs.impl;
break;
case HOST_VERSION:
val = s->control_regs.version;
break;
}
DPRINTF(-1, "(addr 0x%08X), val 0x%08X\n", (unsigned) addr, val);
} else if ((addr >= AHCI_PORT_REGS_START_ADDR) &&
(addr < AHCI_PORT_REGS_END_ADDR)) {
val = ahci_port_read(s, (addr - AHCI_PORT_REGS_START_ADDR) >> 7,
addr & AHCI_PORT_ADDR_OFFSET_MASK);
}
return val;
}
static void ahci_mem_writel(void *ptr, target_phys_addr_t addr, uint32_t val)
{
AHCIState *s = ptr;
addr = addr & 0xfff;
/* Only aligned reads are allowed on AHCI */
if (addr & 3) {
fprintf(stderr, "ahci: Mis-aligned write to addr 0x"
TARGET_FMT_plx "\n", addr);
return;
}
if (addr < AHCI_GENERIC_HOST_CONTROL_REGS_MAX_ADDR) {
DPRINTF(-1, "(addr 0x%08X), val 0x%08X\n", (unsigned) addr, val);
switch (addr) {
case HOST_CAP: /* R/WO, RO */
/* FIXME handle R/WO */
break;
case HOST_CTL: /* R/W */
if (val & HOST_CTL_RESET) {
DPRINTF(-1, "HBA Reset\n");
/* FIXME reset? */
} else {
s->control_regs.ghc = (val & 0x3) | HOST_CTL_AHCI_EN;
ahci_check_irq(s);
}
break;
case HOST_IRQ_STAT: /* R/WC, RO */
s->control_regs.irqstatus &= ~val;
ahci_check_irq(s);
break;
case HOST_PORTS_IMPL: /* R/WO, RO */
/* FIXME handle R/WO */
break;
case HOST_VERSION: /* RO */
/* FIXME report write? */
break;
default:
DPRINTF(-1, "write to unknown register 0x%x\n", (unsigned)addr);
}
} else if ((addr >= AHCI_PORT_REGS_START_ADDR) &&
(addr < AHCI_PORT_REGS_END_ADDR)) {
ahci_port_write(s, (addr - AHCI_PORT_REGS_START_ADDR) >> 7,
addr & AHCI_PORT_ADDR_OFFSET_MASK, val);
}
}
static CPUReadMemoryFunc * const ahci_readfn[3]={
ahci_mem_readl,
ahci_mem_readl,
ahci_mem_readl
};
static CPUWriteMemoryFunc * const ahci_writefn[3]={
ahci_mem_writel,
ahci_mem_writel,
ahci_mem_writel
};
static void ahci_reg_init(AHCIState *s)
{
int i;
s->control_regs.cap = (SATA_PORTS - 1) |
(AHCI_NUM_COMMAND_SLOTS << 8) |
(AHCI_SUPPORTED_SPEED_GEN1 << AHCI_SUPPORTED_SPEED) |
HOST_CAP_NCQ | HOST_CAP_AHCI;
s->control_regs.impl = (1 << SATA_PORTS) - 1;
s->control_regs.version = AHCI_VERSION_1_0;
for (i = 0; i < SATA_PORTS; i++) {
s->dev[i].port_state = STATE_RUN;
}
}
static uint32_t read_from_sglist(uint8_t *buffer, uint32_t len,
QEMUSGList *sglist)
{
uint32_t i = 0;
uint32_t total = 0, once;
ScatterGatherEntry *cur_prd;
uint32_t sgcount;
cur_prd = sglist->sg;
sgcount = sglist->nsg;
for (i = 0; len && sgcount; i++) {
once = MIN(cur_prd->len, len);
cpu_physical_memory_read(cur_prd->base, buffer, once);
cur_prd++;
sgcount--;
len -= once;
buffer += once;
total += once;
}
return total;
}
static uint32_t write_to_sglist(uint8_t *buffer, uint32_t len,
QEMUSGList *sglist)
{
uint32_t i = 0;
uint32_t total = 0, once;
ScatterGatherEntry *cur_prd;
uint32_t sgcount;
DPRINTF(-1, "total: 0x%x bytes\n", len);
cur_prd = sglist->sg;
sgcount = sglist->nsg;
for (i = 0; len && sgcount; i++) {
once = MIN(cur_prd->len, len);
DPRINTF(-1, "write 0x%x bytes to 0x%lx\n", once, (long)cur_prd->base);
cpu_physical_memory_write(cur_prd->base, buffer, once);
cur_prd++;
sgcount--;
len -= once;
buffer += once;
total += once;
}
return total;
}
static void check_cmd(AHCIState *s, int port)
{
AHCIPortRegs *pr = &s->dev[port].port_regs;
int slot;
if ((pr->cmd & PORT_CMD_START) && pr->cmd_issue) {
for (slot = 0; (slot < 32) && pr->cmd_issue; slot++) {
if ((pr->cmd_issue & (1 << slot)) &&
!handle_cmd(s, port, slot)) {
pr->cmd_issue &= ~(1 << slot);
}
}
}
}
static void ahci_check_cmd_bh(void *opaque)
{
AHCIDevice *ad = opaque;
qemu_bh_delete(ad->check_bh);
ad->check_bh = NULL;
if ((ad->busy_slot != -1) &&
!(ad->port.ifs[0].status & (BUSY_STAT|DRQ_STAT))) {
/* no longer busy */
ad->port_regs.cmd_issue &= ~(1 << ad->busy_slot);
ad->busy_slot = -1;
}
check_cmd(ad->hba, ad->port_no);
}
static void ahci_reset_port(AHCIState *s, int port)
{
AHCIDevice *d = &s->dev[port];
AHCIPortRegs *pr = &d->port_regs;
IDEState *ide_state = &d->port.ifs[0];
uint8_t init_fis[0x20];
int i;
DPRINTF(port, "reset port\n");
ide_bus_reset(&d->port);
ide_state->ncq_queues = AHCI_MAX_CMDS;
pr->irq_stat = 0;
pr->irq_mask = 0;
pr->scr_stat = 0;
pr->scr_ctl = 0;
pr->scr_err = 0;
pr->scr_act = 0;
d->busy_slot = -1;
ide_state = &s->dev[port].port.ifs[0];
if (!ide_state->bs) {
return;
}
/* reset ncq queue */
for (i = 0; i < AHCI_MAX_CMDS; i++) {
NCQTransferState *ncq_tfs = &s->dev[port].ncq_tfs[i];
if (!ncq_tfs->used) {
continue;
}
if (ncq_tfs->aiocb) {
bdrv_aio_cancel(ncq_tfs->aiocb);
ncq_tfs->aiocb = NULL;
}
qemu_sglist_destroy(&ncq_tfs->sglist);
ncq_tfs->used = 0;
}
memset(init_fis, 0, sizeof(init_fis));
s->dev[port].port_state = STATE_RUN;
if (!ide_state->bs) {
s->dev[port].port_regs.sig = 0;
ahci: delete write-only variables (v2) Avoid these warnings with GCC 4.6.0: /src/qemu/hw/ide/ahci.c: In function 'ahci_reset_port': /src/qemu/hw/ide/ahci.c:810:14: error: variable 'tfd' set but not used [-Werror=unused-but-set-variable] /src/qemu/hw/ide/ahci.c: In function 'handle_cmd': /src/qemu/hw/ide/ahci.c:1103:19: error: variable 'pr' set but not used [-Werror=unused-but-set-variable] In the tfd variable case, fix the logic also. CC: Alexander Graf <agraf@suse.de> CC: Kevin Wolf <kwolf@redhat.com> Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-19 13:43:09 +03:00
ide_state->status = SEEK_STAT | WRERR_STAT;
ahci: add ahci emulation This patch adds an emulation layer for an ICH-9 AHCI controller. For now this controller does not do IDE legacy emulation. It is a pure AHCI controller. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-14 03:34:40 +03:00
} else if (ide_state->drive_kind == IDE_CD) {
s->dev[port].port_regs.sig = SATA_SIGNATURE_CDROM;
ide_state->lcyl = 0x14;
ide_state->hcyl = 0xeb;
DPRINTF(port, "set lcyl = %d\n", ide_state->lcyl);
init_fis[5] = ide_state->lcyl;
init_fis[6] = ide_state->hcyl;
ide_state->status = SEEK_STAT | WRERR_STAT | READY_STAT;
} else {
s->dev[port].port_regs.sig = SATA_SIGNATURE_DISK;
ide_state->status = SEEK_STAT | WRERR_STAT;
}
ide_state->error = 1;
init_fis[4] = 1;
init_fis[12] = 1;
ahci_write_fis_d2h(d, init_fis);
}
static void debug_print_fis(uint8_t *fis, int cmd_len)
{
#ifdef DEBUG_AHCI
int i;
fprintf(stderr, "fis:");
for (i = 0; i < cmd_len; i++) {
if ((i & 0xf) == 0) {
fprintf(stderr, "\n%02x:",i);
}
fprintf(stderr, "%02x ",fis[i]);
}
fprintf(stderr, "\n");
#endif
}
static void ahci_write_fis_sdb(AHCIState *s, int port, uint32_t finished)
{
AHCIPortRegs *pr = &s->dev[port].port_regs;
IDEState *ide_state;
uint8_t *sdb_fis;
if (!s->dev[port].res_fis ||
!(pr->cmd & PORT_CMD_FIS_RX)) {
return;
}
sdb_fis = &s->dev[port].res_fis[RES_FIS_SDBFIS];
ide_state = &s->dev[port].port.ifs[0];
/* clear memory */
*(uint32_t*)sdb_fis = 0;
/* write values */
sdb_fis[0] = ide_state->error;
sdb_fis[2] = ide_state->status & 0x77;
s->dev[port].finished |= finished;
*(uint32_t*)(sdb_fis + 4) = cpu_to_le32(s->dev[port].finished);
ahci_trigger_irq(s, &s->dev[port], PORT_IRQ_STAT_SDBS);
}
static void ahci_write_fis_d2h(AHCIDevice *ad, uint8_t *cmd_fis)
{
AHCIPortRegs *pr = &ad->port_regs;
uint8_t *d2h_fis;
int i;
target_phys_addr_t cmd_len = 0x80;
int cmd_mapped = 0;
if (!ad->res_fis || !(pr->cmd & PORT_CMD_FIS_RX)) {
return;
}
if (!cmd_fis) {
/* map cmd_fis */
uint64_t tbl_addr = le64_to_cpu(ad->cur_cmd->tbl_addr);
cmd_fis = cpu_physical_memory_map(tbl_addr, &cmd_len, 0);
cmd_mapped = 1;
}
d2h_fis = &ad->res_fis[RES_FIS_RFIS];
d2h_fis[0] = 0x34;
d2h_fis[1] = (ad->hba->control_regs.irqstatus ? (1 << 6) : 0);
d2h_fis[2] = ad->port.ifs[0].status;
d2h_fis[3] = ad->port.ifs[0].error;
d2h_fis[4] = cmd_fis[4];
d2h_fis[5] = cmd_fis[5];
d2h_fis[6] = cmd_fis[6];
d2h_fis[7] = cmd_fis[7];
d2h_fis[8] = cmd_fis[8];
d2h_fis[9] = cmd_fis[9];
d2h_fis[10] = cmd_fis[10];
d2h_fis[11] = cmd_fis[11];
d2h_fis[12] = cmd_fis[12];
d2h_fis[13] = cmd_fis[13];
for (i = 14; i < 0x20; i++) {
d2h_fis[i] = 0;
}
if (d2h_fis[2] & ERR_STAT) {
ahci_trigger_irq(ad->hba, ad, PORT_IRQ_STAT_TFES);
}
ahci_trigger_irq(ad->hba, ad, PORT_IRQ_D2H_REG_FIS);
if (cmd_mapped) {
cpu_physical_memory_unmap(cmd_fis, 0, cmd_len, cmd_len);
}
}
static int ahci_populate_sglist(AHCIDevice *ad, QEMUSGList *sglist)
{
AHCICmdHdr *cmd = ad->cur_cmd;
uint32_t opts = le32_to_cpu(cmd->opts);
uint64_t prdt_addr = le64_to_cpu(cmd->tbl_addr) + 0x80;
int sglist_alloc_hint = opts >> AHCI_CMD_HDR_PRDT_LEN;
target_phys_addr_t prdt_len = (sglist_alloc_hint * sizeof(AHCI_SG));
target_phys_addr_t real_prdt_len = prdt_len;
uint8_t *prdt;
int i;
int r = 0;
if (!sglist_alloc_hint) {
DPRINTF(ad->port_no, "no sg list given by guest: 0x%08x\n", opts);
return -1;
}
/* map PRDT */
if (!(prdt = cpu_physical_memory_map(prdt_addr, &prdt_len, 0))){
DPRINTF(ad->port_no, "map failed\n");
return -1;
}
if (prdt_len < real_prdt_len) {
DPRINTF(ad->port_no, "mapped less than expected\n");
r = -1;
goto out;
}
/* Get entries in the PRDT, init a qemu sglist accordingly */
if (sglist_alloc_hint > 0) {
AHCI_SG *tbl = (AHCI_SG *)prdt;
qemu_sglist_init(sglist, sglist_alloc_hint);
for (i = 0; i < sglist_alloc_hint; i++) {
/* flags_size is zero-based */
qemu_sglist_add(sglist, le64_to_cpu(tbl[i].addr),
le32_to_cpu(tbl[i].flags_size) + 1);
}
}
out:
cpu_physical_memory_unmap(prdt, 0, prdt_len, prdt_len);
return r;
}
static void ncq_cb(void *opaque, int ret)
{
NCQTransferState *ncq_tfs = (NCQTransferState *)opaque;
IDEState *ide_state = &ncq_tfs->drive->port.ifs[0];
/* Clear bit for this tag in SActive */
ncq_tfs->drive->port_regs.scr_act &= ~(1 << ncq_tfs->tag);
if (ret < 0) {
/* error */
ide_state->error = ABRT_ERR;
ide_state->status = READY_STAT | ERR_STAT;
ncq_tfs->drive->port_regs.scr_err |= (1 << ncq_tfs->tag);
} else {
ide_state->status = READY_STAT | SEEK_STAT;
}
ahci_write_fis_sdb(ncq_tfs->drive->hba, ncq_tfs->drive->port_no,
(1 << ncq_tfs->tag));
DPRINTF(ncq_tfs->drive->port_no, "NCQ transfer tag %d finished\n",
ncq_tfs->tag);
qemu_sglist_destroy(&ncq_tfs->sglist);
ncq_tfs->used = 0;
}
static void process_ncq_command(AHCIState *s, int port, uint8_t *cmd_fis,
int slot)
{
NCQFrame *ncq_fis = (NCQFrame*)cmd_fis;
uint8_t tag = ncq_fis->tag >> 3;
NCQTransferState *ncq_tfs = &s->dev[port].ncq_tfs[tag];
if (ncq_tfs->used) {
/* error - already in use */
fprintf(stderr, "%s: tag %d already used\n", __FUNCTION__, tag);
return;
}
ncq_tfs->used = 1;
ncq_tfs->drive = &s->dev[port];
ncq_tfs->slot = slot;
ncq_tfs->lba = ((uint64_t)ncq_fis->lba5 << 40) |
((uint64_t)ncq_fis->lba4 << 32) |
((uint64_t)ncq_fis->lba3 << 24) |
((uint64_t)ncq_fis->lba2 << 16) |
((uint64_t)ncq_fis->lba1 << 8) |
(uint64_t)ncq_fis->lba0;
/* Note: We calculate the sector count, but don't currently rely on it.
* The total size of the DMA buffer tells us the transfer size instead. */
ncq_tfs->sector_count = ((uint16_t)ncq_fis->sector_count_high << 8) |
ncq_fis->sector_count_low;
DPRINTF(port, "NCQ transfer LBA from %ld to %ld, drive max %ld\n",
ncq_tfs->lba, ncq_tfs->lba + ncq_tfs->sector_count - 2,
s->dev[port].port.ifs[0].nb_sectors - 1);
ahci_populate_sglist(&s->dev[port], &ncq_tfs->sglist);
ncq_tfs->tag = tag;
switch(ncq_fis->command) {
case READ_FPDMA_QUEUED:
DPRINTF(port, "NCQ reading %d sectors from LBA %ld, tag %d\n",
ncq_tfs->sector_count-1, ncq_tfs->lba, ncq_tfs->tag);
ncq_tfs->is_read = 1;
DPRINTF(port, "tag %d aio read %ld\n", ncq_tfs->tag, ncq_tfs->lba);
ncq_tfs->aiocb = dma_bdrv_read(ncq_tfs->drive->port.ifs[0].bs,
&ncq_tfs->sglist, ncq_tfs->lba,
ncq_cb, ncq_tfs);
break;
case WRITE_FPDMA_QUEUED:
DPRINTF(port, "NCQ writing %d sectors to LBA %ld, tag %d\n",
ncq_tfs->sector_count-1, ncq_tfs->lba, ncq_tfs->tag);
ncq_tfs->is_read = 0;
DPRINTF(port, "tag %d aio write %ld\n", ncq_tfs->tag, ncq_tfs->lba);
ncq_tfs->aiocb = dma_bdrv_write(ncq_tfs->drive->port.ifs[0].bs,
&ncq_tfs->sglist, ncq_tfs->lba,
ncq_cb, ncq_tfs);
break;
default:
DPRINTF(port, "error: tried to process non-NCQ command as NCQ\n");
qemu_sglist_destroy(&ncq_tfs->sglist);
break;
}
}
static int handle_cmd(AHCIState *s, int port, int slot)
{
IDEState *ide_state;
uint32_t opts;
uint64_t tbl_addr;
AHCICmdHdr *cmd;
uint8_t *cmd_fis;
target_phys_addr_t cmd_len;
if (s->dev[port].port.ifs[0].status & (BUSY_STAT|DRQ_STAT)) {
/* Engine currently busy, try again later */
DPRINTF(port, "engine busy\n");
return -1;
}
cmd = &((AHCICmdHdr *)s->dev[port].lst)[slot];
if (!s->dev[port].lst) {
DPRINTF(port, "error: lst not given but cmd handled");
return -1;
}
/* remember current slot handle for later */
s->dev[port].cur_cmd = cmd;
opts = le32_to_cpu(cmd->opts);
tbl_addr = le64_to_cpu(cmd->tbl_addr);
cmd_len = 0x80;
cmd_fis = cpu_physical_memory_map(tbl_addr, &cmd_len, 1);
if (!cmd_fis) {
DPRINTF(port, "error: guest passed us an invalid cmd fis\n");
return -1;
}
/* The device we are working for */
ide_state = &s->dev[port].port.ifs[0];
if (!ide_state->bs) {
DPRINTF(port, "error: guest accessed unused port");
goto out;
}
debug_print_fis(cmd_fis, 0x90);
//debug_print_fis(cmd_fis, (opts & AHCI_CMD_HDR_CMD_FIS_LEN) * 4);
switch (cmd_fis[0]) {
case SATA_FIS_TYPE_REGISTER_H2D:
break;
default:
DPRINTF(port, "unknown command cmd_fis[0]=%02x cmd_fis[1]=%02x "
"cmd_fis[2]=%02x\n", cmd_fis[0], cmd_fis[1],
cmd_fis[2]);
goto out;
break;
}
switch (cmd_fis[1]) {
case SATA_FIS_REG_H2D_UPDATE_COMMAND_REGISTER:
break;
case 0:
break;
default:
DPRINTF(port, "unknown command cmd_fis[0]=%02x cmd_fis[1]=%02x "
"cmd_fis[2]=%02x\n", cmd_fis[0], cmd_fis[1],
cmd_fis[2]);
goto out;
break;
}
switch (s->dev[port].port_state) {
case STATE_RUN:
if (cmd_fis[15] & ATA_SRST) {
s->dev[port].port_state = STATE_RESET;
}
break;
case STATE_RESET:
if (!(cmd_fis[15] & ATA_SRST)) {
ahci_reset_port(s, port);
}
break;
}
if (cmd_fis[1] == SATA_FIS_REG_H2D_UPDATE_COMMAND_REGISTER) {
/* Check for NCQ command */
if ((cmd_fis[2] == READ_FPDMA_QUEUED) ||
(cmd_fis[2] == WRITE_FPDMA_QUEUED)) {
process_ncq_command(s, port, cmd_fis, slot);
goto out;
}
/* Decompose the FIS */
ide_state->nsector = (int64_t)((cmd_fis[13] << 8) | cmd_fis[12]);
ide_state->feature = cmd_fis[3];
if (!ide_state->nsector) {
ide_state->nsector = 256;
}
if (ide_state->drive_kind != IDE_CD) {
ide_set_sector(ide_state, (cmd_fis[6] << 16) | (cmd_fis[5] << 8) |
cmd_fis[4]);
}
/* Copy the ACMD field (ATAPI packet, if any) from the AHCI command
* table to ide_state->io_buffer
*/
if (opts & AHCI_CMD_ATAPI) {
memcpy(ide_state->io_buffer, &cmd_fis[AHCI_COMMAND_TABLE_ACMD], 0x10);
ide_state->lcyl = 0x14;
ide_state->hcyl = 0xeb;
debug_print_fis(ide_state->io_buffer, 0x10);
ide_state->feature = IDE_FEATURE_DMA;
s->dev[port].done_atapi_packet = 0;
/* XXX send PIO setup FIS */
}
ide_state->error = 0;
/* Reset transferred byte counter */
cmd->status = 0;
/* We're ready to process the command in FIS byte 2. */
ide_exec_cmd(&s->dev[port].port, cmd_fis[2]);
if (s->dev[port].port.ifs[0].status & READY_STAT) {
ahci_write_fis_d2h(&s->dev[port], cmd_fis);
}
}
out:
cpu_physical_memory_unmap(cmd_fis, 1, cmd_len, cmd_len);
if (s->dev[port].port.ifs[0].status & (BUSY_STAT|DRQ_STAT)) {
/* async command, complete later */
s->dev[port].busy_slot = slot;
return -1;
}
/* done handling the command */
return 0;
}
/* DMA dev <-> ram */
static int ahci_start_transfer(IDEDMA *dma)
{
AHCIDevice *ad = DO_UPCAST(AHCIDevice, dma, dma);
IDEState *s = &ad->port.ifs[0];
uint32_t size = (uint32_t)(s->data_end - s->data_ptr);
/* write == ram -> device */
uint32_t opts = le32_to_cpu(ad->cur_cmd->opts);
int is_write = opts & AHCI_CMD_WRITE;
int is_atapi = opts & AHCI_CMD_ATAPI;
int has_sglist = 0;
if (is_atapi && !ad->done_atapi_packet) {
/* already prepopulated iobuffer */
ad->done_atapi_packet = 1;
goto out;
}
if (!ahci_populate_sglist(ad, &s->sg)) {
has_sglist = 1;
}
DPRINTF(ad->port_no, "%sing %d bytes on %s w/%s sglist\n",
is_write ? "writ" : "read", size, is_atapi ? "atapi" : "ata",
has_sglist ? "" : "o");
if (is_write && has_sglist && (s->data_ptr < s->data_end)) {
read_from_sglist(s->data_ptr, size, &s->sg);
}
if (!is_write && has_sglist && (s->data_ptr < s->data_end)) {
write_to_sglist(s->data_ptr, size, &s->sg);
}
/* update number of transferred bytes */
ad->cur_cmd->status = cpu_to_le32(le32_to_cpu(ad->cur_cmd->status) + size);
out:
/* declare that we processed everything */
s->data_ptr = s->data_end;
if (has_sglist) {
qemu_sglist_destroy(&s->sg);
}
s->end_transfer_func(s);
if (!(s->status & DRQ_STAT)) {
/* done with DMA */
ahci_trigger_irq(ad->hba, ad, PORT_IRQ_STAT_DSS);
}
return 0;
}
static void ahci_start_dma(IDEDMA *dma, IDEState *s,
BlockDriverCompletionFunc *dma_cb)
{
AHCIDevice *ad = DO_UPCAST(AHCIDevice, dma, dma);
DPRINTF(ad->port_no, "\n");
ad->dma_cb = dma_cb;
ad->dma_status |= BM_STATUS_DMAING;
dma_cb(s, 0);
}
static int ahci_dma_prepare_buf(IDEDMA *dma, int is_write)
{
AHCIDevice *ad = DO_UPCAST(AHCIDevice, dma, dma);
IDEState *s = &ad->port.ifs[0];
int i;
ahci_populate_sglist(ad, &s->sg);
s->io_buffer_size = 0;
for (i = 0; i < s->sg.nsg; i++) {
s->io_buffer_size += s->sg.sg[i].len;
}
DPRINTF(ad->port_no, "len=%#x\n", s->io_buffer_size);
return s->io_buffer_size != 0;
}
static int ahci_dma_rw_buf(IDEDMA *dma, int is_write)
{
AHCIDevice *ad = DO_UPCAST(AHCIDevice, dma, dma);
IDEState *s = &ad->port.ifs[0];
uint8_t *p = s->io_buffer + s->io_buffer_index;
int l = s->io_buffer_size - s->io_buffer_index;
if (ahci_populate_sglist(ad, &s->sg)) {
return 0;
}
if (is_write) {
write_to_sglist(p, l, &s->sg);
} else {
read_from_sglist(p, l, &s->sg);
}
/* update number of transferred bytes */
ad->cur_cmd->status = cpu_to_le32(le32_to_cpu(ad->cur_cmd->status) + l);
s->io_buffer_index += l;
DPRINTF(ad->port_no, "len=%#x\n", l);
return 1;
}
static int ahci_dma_set_unit(IDEDMA *dma, int unit)
{
/* only a single unit per link */
return 0;
}
static int ahci_dma_add_status(IDEDMA *dma, int status)
{
AHCIDevice *ad = DO_UPCAST(AHCIDevice, dma, dma);
ad->dma_status |= status;
DPRINTF(ad->port_no, "set status: %x\n", status);
if (status & BM_STATUS_INT) {
ahci_trigger_irq(ad->hba, ad, PORT_IRQ_STAT_DSS);
}
return 0;
}
static int ahci_dma_set_inactive(IDEDMA *dma)
{
AHCIDevice *ad = DO_UPCAST(AHCIDevice, dma, dma);
DPRINTF(ad->port_no, "dma done\n");
/* update d2h status */
ahci_write_fis_d2h(ad, NULL);
ad->dma_cb = NULL;
/* maybe we still have something to process, check later */
ad->check_bh = qemu_bh_new(ahci_check_cmd_bh, ad);
qemu_bh_schedule(ad->check_bh);
return 0;
}
static void ahci_irq_set(void *opaque, int n, int level)
{
}
static void ahci_dma_restart_cb(void *opaque, int running, int reason)
{
}
static int ahci_dma_reset(IDEDMA *dma)
{
return 0;
}
static const IDEDMAOps ahci_dma_ops = {
.start_dma = ahci_start_dma,
.start_transfer = ahci_start_transfer,
.prepare_buf = ahci_dma_prepare_buf,
.rw_buf = ahci_dma_rw_buf,
.set_unit = ahci_dma_set_unit,
.add_status = ahci_dma_add_status,
.set_inactive = ahci_dma_set_inactive,
.restart_cb = ahci_dma_restart_cb,
.reset = ahci_dma_reset,
};
static void ahci_init(AHCIState *s, DeviceState *qdev)
{
qemu_irq *irqs;
int i;
ahci_reg_init(s);
s->mem = cpu_register_io_memory(ahci_readfn, ahci_writefn, s,
DEVICE_LITTLE_ENDIAN);
irqs = qemu_allocate_irqs(ahci_irq_set, s, SATA_PORTS);
for (i = 0; i < SATA_PORTS; i++) {
AHCIDevice *ad = &s->dev[i];
ide_bus_new(&ad->port, qdev, i);
ide_init2(&ad->port, irqs[i]);
ad->hba = s;
ad->port_no = i;
ad->port.dma = &ad->dma;
ad->port.dma->ops = &ahci_dma_ops;
ad->port_regs.cmd = PORT_CMD_SPIN_UP | PORT_CMD_POWER_ON;
}
}
static void ahci_pci_map(PCIDevice *pci_dev, int region_num,
pcibus_t addr, pcibus_t size, int type)
{
struct AHCIPCIState *d = (struct AHCIPCIState *)pci_dev;
AHCIState *s = &d->ahci;
cpu_register_physical_memory(addr, size, s->mem);
}
static void ahci_reset(void *opaque)
{
struct AHCIPCIState *d = opaque;
int i;
for (i = 0; i < SATA_PORTS; i++) {
ahci_reset_port(&d->ahci, i);
}
}
static int pci_ahci_init(PCIDevice *dev)
{
struct AHCIPCIState *d;
d = DO_UPCAST(struct AHCIPCIState, card, dev);
pci_config_set_vendor_id(d->card.config, PCI_VENDOR_ID_INTEL);
pci_config_set_device_id(d->card.config, PCI_DEVICE_ID_INTEL_82801IR);
pci_config_set_class(d->card.config, PCI_CLASS_STORAGE_SATA);
pci_config_set_revision(d->card.config, 0x02);
pci_config_set_prog_interface(d->card.config, AHCI_PROGMODE_MAJOR_REV_1);
d->card.config[PCI_CACHE_LINE_SIZE] = 0x08; /* Cache line size */
d->card.config[PCI_LATENCY_TIMER] = 0x00; /* Latency timer */
pci_config_set_interrupt_pin(d->card.config, 1);
ahci: set SATA Mode Select Set SATA Mode Select to AHCI in the Address Map Register. Signed-off-by: Sebastian Herbszt <herbszt@gmx.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-14 03:34:43 +03:00
/* XXX Software should program this register */
d->card.config[0x90] = 1 << 6; /* Address Map Register - AHCI mode */
ahci: add ahci emulation This patch adds an emulation layer for an ICH-9 AHCI controller. For now this controller does not do IDE legacy emulation. It is a pure AHCI controller. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-14 03:34:40 +03:00
qemu_register_reset(ahci_reset, d);
/* XXX BAR size should be 1k, but that breaks, so bump it to 4k for now */
pci_register_bar(&d->card, 5, 0x1000, PCI_BASE_ADDRESS_SPACE_MEMORY,
ahci_pci_map);
msi_init(dev, 0x50, 1, true, false);
ahci_init(&d->ahci, &dev->qdev);
d->ahci.irq = d->card.irq[0];
return 0;
}
static int pci_ahci_uninit(PCIDevice *dev)
{
struct AHCIPCIState *d;
d = DO_UPCAST(struct AHCIPCIState, card, dev);
if (msi_enabled(dev)) {
msi_uninit(dev);
}
qemu_unregister_reset(ahci_reset, d);
return 0;
}
static void pci_ahci_write_config(PCIDevice *pci, uint32_t addr,
uint32_t val, int len)
{
pci_default_write_config(pci, addr, val, len);
msi_write_config(pci, addr, val, len);
}
static PCIDeviceInfo ahci_info = {
.qdev.name = "ahci",
.qdev.size = sizeof(AHCIPCIState),
.init = pci_ahci_init,
.exit = pci_ahci_uninit,
.config_write = pci_ahci_write_config,
};
static void ahci_pci_register_devices(void)
{
pci_qdev_register(&ahci_info);
}
device_init(ahci_pci_register_devices)
Reference in New Issue Copy Permalink