mirrors/qemu
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
fe656e3185
qemu/tests/qemu-iotests/083.out

249 lines
5.5 KiB
Plaintext
Raw Normal View History

qemu-iotests: add 083 NBD client disconnect tests This new test case uses nbd-fault-injector.py to simulate broken TCP connections at each stage in the NBD protocol. This way we can exercise block/nbd-client.c's socket error handling code paths. In particular, this serves as a regression test to make sure nbd-client.c doesn't cause an infinite loop by leaving its nbd_receive_reply() fd handler registered after the connection has been closed. This bug was fixed in an earlier patch. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-26 18:30:20 +04:00
QA output created by 083
=== Check disconnect before neg1 ===
qemu-iotests: test NBD over UNIX domain sockets in 083 083 only tests TCP. Some failures might be specific to UNIX domain sockets. A few adjustments are necessary: 1. Generating a port number and waiting for server startup is TCP-specific. Use the new nbd-fault-injector.py startup protocol to fetch the address. This is a little more elegant because we don't need netstat anymore. 2. The NBD filter does not work for the UNIX domain sockets URIs we generate and must be extended. 3. Run all tests twice: once for TCP and once for UNIX domain sockets. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20170829122745.14309-4-stefanha@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2017-08-29 15:27:45 +03:00
can't open device nbd+tcp://127.0.0.1:PORT/foo
qemu-iotests: add 083 NBD client disconnect tests This new test case uses nbd-fault-injector.py to simulate broken TCP connections at each stage in the NBD protocol. This way we can exercise block/nbd-client.c's socket error handling code paths. In particular, this serves as a regression test to make sure nbd-client.c doesn't cause an infinite loop by leaving its nbd_receive_reply() fd handler registered after the connection has been closed. This bug was fixed in an earlier patch. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-26 18:30:20 +04:00
=== Check disconnect after neg1 ===
qemu-iotests: test NBD over UNIX domain sockets in 083 083 only tests TCP. Some failures might be specific to UNIX domain sockets. A few adjustments are necessary: 1. Generating a port number and waiting for server startup is TCP-specific. Use the new nbd-fault-injector.py startup protocol to fetch the address. This is a little more elegant because we don't need netstat anymore. 2. The NBD filter does not work for the UNIX domain sockets URIs we generate and must be extended. 3. Run all tests twice: once for TCP and once for UNIX domain sockets. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20170829122745.14309-4-stefanha@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2017-08-29 15:27:45 +03:00
can't open device nbd+tcp://127.0.0.1:PORT/foo
qemu-iotests: add 083 NBD client disconnect tests This new test case uses nbd-fault-injector.py to simulate broken TCP connections at each stage in the NBD protocol. This way we can exercise block/nbd-client.c's socket error handling code paths. In particular, this serves as a regression test to make sure nbd-client.c doesn't cause an infinite loop by leaving its nbd_receive_reply() fd handler registered after the connection has been closed. This bug was fixed in an earlier patch. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-26 18:30:20 +04:00
=== Check disconnect 8 neg1 ===
qemu-iotests: test NBD over UNIX domain sockets in 083 083 only tests TCP. Some failures might be specific to UNIX domain sockets. A few adjustments are necessary: 1. Generating a port number and waiting for server startup is TCP-specific. Use the new nbd-fault-injector.py startup protocol to fetch the address. This is a little more elegant because we don't need netstat anymore. 2. The NBD filter does not work for the UNIX domain sockets URIs we generate and must be extended. 3. Run all tests twice: once for TCP and once for UNIX domain sockets. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20170829122745.14309-4-stefanha@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2017-08-29 15:27:45 +03:00
can't open device nbd+tcp://127.0.0.1:PORT/foo
qemu-iotests: add 083 NBD client disconnect tests This new test case uses nbd-fault-injector.py to simulate broken TCP connections at each stage in the NBD protocol. This way we can exercise block/nbd-client.c's socket error handling code paths. In particular, this serves as a regression test to make sure nbd-client.c doesn't cause an infinite loop by leaving its nbd_receive_reply() fd handler registered after the connection has been closed. This bug was fixed in an earlier patch. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-26 18:30:20 +04:00
=== Check disconnect 16 neg1 ===
qemu-iotests: test NBD over UNIX domain sockets in 083 083 only tests TCP. Some failures might be specific to UNIX domain sockets. A few adjustments are necessary: 1. Generating a port number and waiting for server startup is TCP-specific. Use the new nbd-fault-injector.py startup protocol to fetch the address. This is a little more elegant because we don't need netstat anymore. 2. The NBD filter does not work for the UNIX domain sockets URIs we generate and must be extended. 3. Run all tests twice: once for TCP and once for UNIX domain sockets. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20170829122745.14309-4-stefanha@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2017-08-29 15:27:45 +03:00
can't open device nbd+tcp://127.0.0.1:PORT/foo
qemu-iotests: add 083 NBD client disconnect tests This new test case uses nbd-fault-injector.py to simulate broken TCP connections at each stage in the NBD protocol. This way we can exercise block/nbd-client.c's socket error handling code paths. In particular, this serves as a regression test to make sure nbd-client.c doesn't cause an infinite loop by leaving its nbd_receive_reply() fd handler registered after the connection has been closed. This bug was fixed in an earlier patch. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-26 18:30:20 +04:00
=== Check disconnect before export ===
qemu-iotests: test NBD over UNIX domain sockets in 083 083 only tests TCP. Some failures might be specific to UNIX domain sockets. A few adjustments are necessary: 1. Generating a port number and waiting for server startup is TCP-specific. Use the new nbd-fault-injector.py startup protocol to fetch the address. This is a little more elegant because we don't need netstat anymore. 2. The NBD filter does not work for the UNIX domain sockets URIs we generate and must be extended. 3. Run all tests twice: once for TCP and once for UNIX domain sockets. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20170829122745.14309-4-stefanha@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2017-08-29 15:27:45 +03:00
can't open device nbd+tcp://127.0.0.1:PORT/foo
qemu-iotests: add 083 NBD client disconnect tests This new test case uses nbd-fault-injector.py to simulate broken TCP connections at each stage in the NBD protocol. This way we can exercise block/nbd-client.c's socket error handling code paths. In particular, this serves as a regression test to make sure nbd-client.c doesn't cause an infinite loop by leaving its nbd_receive_reply() fd handler registered after the connection has been closed. This bug was fixed in an earlier patch. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-26 18:30:20 +04:00
=== Check disconnect after export ===
qemu-iotests: test NBD over UNIX domain sockets in 083 083 only tests TCP. Some failures might be specific to UNIX domain sockets. A few adjustments are necessary: 1. Generating a port number and waiting for server startup is TCP-specific. Use the new nbd-fault-injector.py startup protocol to fetch the address. This is a little more elegant because we don't need netstat anymore. 2. The NBD filter does not work for the UNIX domain sockets URIs we generate and must be extended. 3. Run all tests twice: once for TCP and once for UNIX domain sockets. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20170829122745.14309-4-stefanha@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2017-08-29 15:27:45 +03:00
can't open device nbd+tcp://127.0.0.1:PORT/foo
qemu-iotests: add 083 NBD client disconnect tests This new test case uses nbd-fault-injector.py to simulate broken TCP connections at each stage in the NBD protocol. This way we can exercise block/nbd-client.c's socket error handling code paths. In particular, this serves as a regression test to make sure nbd-client.c doesn't cause an infinite loop by leaving its nbd_receive_reply() fd handler registered after the connection has been closed. This bug was fixed in an earlier patch. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-26 18:30:20 +04:00
=== Check disconnect 4 export ===
qemu-iotests: test NBD over UNIX domain sockets in 083 083 only tests TCP. Some failures might be specific to UNIX domain sockets. A few adjustments are necessary: 1. Generating a port number and waiting for server startup is TCP-specific. Use the new nbd-fault-injector.py startup protocol to fetch the address. This is a little more elegant because we don't need netstat anymore. 2. The NBD filter does not work for the UNIX domain sockets URIs we generate and must be extended. 3. Run all tests twice: once for TCP and once for UNIX domain sockets. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20170829122745.14309-4-stefanha@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2017-08-29 15:27:45 +03:00
can't open device nbd+tcp://127.0.0.1:PORT/foo
qemu-iotests: add 083 NBD client disconnect tests This new test case uses nbd-fault-injector.py to simulate broken TCP connections at each stage in the NBD protocol. This way we can exercise block/nbd-client.c's socket error handling code paths. In particular, this serves as a regression test to make sure nbd-client.c doesn't cause an infinite loop by leaving its nbd_receive_reply() fd handler registered after the connection has been closed. This bug was fixed in an earlier patch. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-26 18:30:20 +04:00
=== Check disconnect 12 export ===
qemu-iotests: test NBD over UNIX domain sockets in 083 083 only tests TCP. Some failures might be specific to UNIX domain sockets. A few adjustments are necessary: 1. Generating a port number and waiting for server startup is TCP-specific. Use the new nbd-fault-injector.py startup protocol to fetch the address. This is a little more elegant because we don't need netstat anymore. 2. The NBD filter does not work for the UNIX domain sockets URIs we generate and must be extended. 3. Run all tests twice: once for TCP and once for UNIX domain sockets. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20170829122745.14309-4-stefanha@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2017-08-29 15:27:45 +03:00
can't open device nbd+tcp://127.0.0.1:PORT/foo
qemu-iotests: add 083 NBD client disconnect tests This new test case uses nbd-fault-injector.py to simulate broken TCP connections at each stage in the NBD protocol. This way we can exercise block/nbd-client.c's socket error handling code paths. In particular, this serves as a regression test to make sure nbd-client.c doesn't cause an infinite loop by leaving its nbd_receive_reply() fd handler registered after the connection has been closed. This bug was fixed in an earlier patch. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-26 18:30:20 +04:00
=== Check disconnect 16 export ===
qemu-iotests: test NBD over UNIX domain sockets in 083 083 only tests TCP. Some failures might be specific to UNIX domain sockets. A few adjustments are necessary: 1. Generating a port number and waiting for server startup is TCP-specific. Use the new nbd-fault-injector.py startup protocol to fetch the address. This is a little more elegant because we don't need netstat anymore. 2. The NBD filter does not work for the UNIX domain sockets URIs we generate and must be extended. 3. Run all tests twice: once for TCP and once for UNIX domain sockets. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20170829122745.14309-4-stefanha@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2017-08-29 15:27:45 +03:00
can't open device nbd+tcp://127.0.0.1:PORT/foo
qemu-iotests: add 083 NBD client disconnect tests This new test case uses nbd-fault-injector.py to simulate broken TCP connections at each stage in the NBD protocol. This way we can exercise block/nbd-client.c's socket error handling code paths. In particular, this serves as a regression test to make sure nbd-client.c doesn't cause an infinite loop by leaving its nbd_receive_reply() fd handler registered after the connection has been closed. This bug was fixed in an earlier patch. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-26 18:30:20 +04:00
=== Check disconnect before neg2 ===
qemu-iotests: test NBD over UNIX domain sockets in 083 083 only tests TCP. Some failures might be specific to UNIX domain sockets. A few adjustments are necessary: 1. Generating a port number and waiting for server startup is TCP-specific. Use the new nbd-fault-injector.py startup protocol to fetch the address. This is a little more elegant because we don't need netstat anymore. 2. The NBD filter does not work for the UNIX domain sockets URIs we generate and must be extended. 3. Run all tests twice: once for TCP and once for UNIX domain sockets. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20170829122745.14309-4-stefanha@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2017-08-29 15:27:45 +03:00
can't open device nbd+tcp://127.0.0.1:PORT/foo
qemu-iotests: add 083 NBD client disconnect tests This new test case uses nbd-fault-injector.py to simulate broken TCP connections at each stage in the NBD protocol. This way we can exercise block/nbd-client.c's socket error handling code paths. In particular, this serves as a regression test to make sure nbd-client.c doesn't cause an infinite loop by leaving its nbd_receive_reply() fd handler registered after the connection has been closed. This bug was fixed in an earlier patch. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-26 18:30:20 +04:00
=== Check disconnect after neg2 ===
iotests: Make nbd-fault-injector flush When closing a connection, make the nbd-fault-injector flush the socket. Without this, the output is a bit unreliable with Python 3. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20181022135307.14398-2-mreitz@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-22 16:52:59 +03:00
Unable to read from socket: Connection reset by peer
nbd: Minimal structured read for client Minimal implementation: for structured error only error_report error message. Note that test 83 is now more verbose, because the implementation prints more warnings about unexpected communication errors; perhaps future patches should tone things down by using trace messages instead of traces, but the common case of successful communication is no noisier than before. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20171027104037.8319-13-eblake@redhat.com>
2017-10-27 13:40:37 +03:00
Connection closed
iotests: Fix 083 As of 8f9e835fd2e687d2bfe936819c3494af4343614d, probing should be disabled in the qemu-iotests (at least when using qemu-io). This broke 083's reference output (which consisted mostly of "Could not read image for determining its format"). This patch fixes it. Note that one case which failed before is now successful: Disconnect after data. This is due to qemu having read twice before (once for probing, once for the qemu-io read command), but only once now (the qemu-io read command). Therefore, reading is successful (which is correct). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-01-27 05:02:56 +03:00
read failed: Input/output error
qemu-iotests: add 083 NBD client disconnect tests This new test case uses nbd-fault-injector.py to simulate broken TCP connections at each stage in the NBD protocol. This way we can exercise block/nbd-client.c's socket error handling code paths. In particular, this serves as a regression test to make sure nbd-client.c doesn't cause an infinite loop by leaving its nbd_receive_reply() fd handler registered after the connection has been closed. This bug was fixed in an earlier patch. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-26 18:30:20 +04:00
=== Check disconnect 8 neg2 ===
qemu-iotests: test NBD over UNIX domain sockets in 083 083 only tests TCP. Some failures might be specific to UNIX domain sockets. A few adjustments are necessary: 1. Generating a port number and waiting for server startup is TCP-specific. Use the new nbd-fault-injector.py startup protocol to fetch the address. This is a little more elegant because we don't need netstat anymore. 2. The NBD filter does not work for the UNIX domain sockets URIs we generate and must be extended. 3. Run all tests twice: once for TCP and once for UNIX domain sockets. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20170829122745.14309-4-stefanha@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2017-08-29 15:27:45 +03:00
can't open device nbd+tcp://127.0.0.1:PORT/foo
qemu-iotests: add 083 NBD client disconnect tests This new test case uses nbd-fault-injector.py to simulate broken TCP connections at each stage in the NBD protocol. This way we can exercise block/nbd-client.c's socket error handling code paths. In particular, this serves as a regression test to make sure nbd-client.c doesn't cause an infinite loop by leaving its nbd_receive_reply() fd handler registered after the connection has been closed. This bug was fixed in an earlier patch. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-26 18:30:20 +04:00
=== Check disconnect 10 neg2 ===
qemu-iotests: test NBD over UNIX domain sockets in 083 083 only tests TCP. Some failures might be specific to UNIX domain sockets. A few adjustments are necessary: 1. Generating a port number and waiting for server startup is TCP-specific. Use the new nbd-fault-injector.py startup protocol to fetch the address. This is a little more elegant because we don't need netstat anymore. 2. The NBD filter does not work for the UNIX domain sockets URIs we generate and must be extended. 3. Run all tests twice: once for TCP and once for UNIX domain sockets. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20170829122745.14309-4-stefanha@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2017-08-29 15:27:45 +03:00
can't open device nbd+tcp://127.0.0.1:PORT/foo
qemu-iotests: add 083 NBD client disconnect tests This new test case uses nbd-fault-injector.py to simulate broken TCP connections at each stage in the NBD protocol. This way we can exercise block/nbd-client.c's socket error handling code paths. In particular, this serves as a regression test to make sure nbd-client.c doesn't cause an infinite loop by leaving its nbd_receive_reply() fd handler registered after the connection has been closed. This bug was fixed in an earlier patch. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-26 18:30:20 +04:00
=== Check disconnect before request ===
iotests: Make nbd-fault-injector flush When closing a connection, make the nbd-fault-injector flush the socket. Without this, the output is a bit unreliable with Python 3. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20181022135307.14398-2-mreitz@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-22 16:52:59 +03:00
Unable to read from socket: Connection reset by peer
nbd: Minimal structured read for client Minimal implementation: for structured error only error_report error message. Note that test 83 is now more verbose, because the implementation prints more warnings about unexpected communication errors; perhaps future patches should tone things down by using trace messages instead of traces, but the common case of successful communication is no noisier than before. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20171027104037.8319-13-eblake@redhat.com>
2017-10-27 13:40:37 +03:00
Connection closed
iotests: Fix 083 As of 8f9e835fd2e687d2bfe936819c3494af4343614d, probing should be disabled in the qemu-iotests (at least when using qemu-io). This broke 083's reference output (which consisted mostly of "Could not read image for determining its format"). This patch fixes it. Note that one case which failed before is now successful: Disconnect after data. This is due to qemu having read twice before (once for probing, once for the qemu-io read command), but only once now (the qemu-io read command). Therefore, reading is successful (which is correct). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-01-27 05:02:56 +03:00
read failed: Input/output error
qemu-iotests: add 083 NBD client disconnect tests This new test case uses nbd-fault-injector.py to simulate broken TCP connections at each stage in the NBD protocol. This way we can exercise block/nbd-client.c's socket error handling code paths. In particular, this serves as a regression test to make sure nbd-client.c doesn't cause an infinite loop by leaving its nbd_receive_reply() fd handler registered after the connection has been closed. This bug was fixed in an earlier patch. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-26 18:30:20 +04:00
=== Check disconnect after request ===
nbd: Minimal structured read for client Minimal implementation: for structured error only error_report error message. Note that test 83 is now more verbose, because the implementation prints more warnings about unexpected communication errors; perhaps future patches should tone things down by using trace messages instead of traces, but the common case of successful communication is no noisier than before. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20171027104037.8319-13-eblake@redhat.com>
2017-10-27 13:40:37 +03:00
Connection closed
iotests: Fix 083 As of 8f9e835fd2e687d2bfe936819c3494af4343614d, probing should be disabled in the qemu-iotests (at least when using qemu-io). This broke 083's reference output (which consisted mostly of "Could not read image for determining its format"). This patch fixes it. Note that one case which failed before is now successful: Disconnect after data. This is due to qemu having read twice before (once for probing, once for the qemu-io read command), but only once now (the qemu-io read command). Therefore, reading is successful (which is correct). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-01-27 05:02:56 +03:00
read failed: Input/output error
qemu-iotests: add 083 NBD client disconnect tests This new test case uses nbd-fault-injector.py to simulate broken TCP connections at each stage in the NBD protocol. This way we can exercise block/nbd-client.c's socket error handling code paths. In particular, this serves as a regression test to make sure nbd-client.c doesn't cause an infinite loop by leaving its nbd_receive_reply() fd handler registered after the connection has been closed. This bug was fixed in an earlier patch. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-26 18:30:20 +04:00
=== Check disconnect before reply ===
nbd: Minimal structured read for client Minimal implementation: for structured error only error_report error message. Note that test 83 is now more verbose, because the implementation prints more warnings about unexpected communication errors; perhaps future patches should tone things down by using trace messages instead of traces, but the common case of successful communication is no noisier than before. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20171027104037.8319-13-eblake@redhat.com>
2017-10-27 13:40:37 +03:00
Connection closed
iotests: Fix 083 As of 8f9e835fd2e687d2bfe936819c3494af4343614d, probing should be disabled in the qemu-iotests (at least when using qemu-io). This broke 083's reference output (which consisted mostly of "Could not read image for determining its format"). This patch fixes it. Note that one case which failed before is now successful: Disconnect after data. This is due to qemu having read twice before (once for probing, once for the qemu-io read command), but only once now (the qemu-io read command). Therefore, reading is successful (which is correct). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-01-27 05:02:56 +03:00
read failed: Input/output error
qemu-iotests: add 083 NBD client disconnect tests This new test case uses nbd-fault-injector.py to simulate broken TCP connections at each stage in the NBD protocol. This way we can exercise block/nbd-client.c's socket error handling code paths. In particular, this serves as a regression test to make sure nbd-client.c doesn't cause an infinite loop by leaving its nbd_receive_reply() fd handler registered after the connection has been closed. This bug was fixed in an earlier patch. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-26 18:30:20 +04:00
=== Check disconnect after reply ===
nbd: Minimal structured read for client Minimal implementation: for structured error only error_report error message. Note that test 83 is now more verbose, because the implementation prints more warnings about unexpected communication errors; perhaps future patches should tone things down by using trace messages instead of traces, but the common case of successful communication is no noisier than before. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20171027104037.8319-13-eblake@redhat.com>
2017-10-27 13:40:37 +03:00
Unexpected end-of-file before all bytes were read
iotests: Fix 083 As of 8f9e835fd2e687d2bfe936819c3494af4343614d, probing should be disabled in the qemu-iotests (at least when using qemu-io). This broke 083's reference output (which consisted mostly of "Could not read image for determining its format"). This patch fixes it. Note that one case which failed before is now successful: Disconnect after data. This is due to qemu having read twice before (once for probing, once for the qemu-io read command), but only once now (the qemu-io read command). Therefore, reading is successful (which is correct). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-01-27 05:02:56 +03:00
read failed: Input/output error
qemu-iotests: add 083 NBD client disconnect tests This new test case uses nbd-fault-injector.py to simulate broken TCP connections at each stage in the NBD protocol. This way we can exercise block/nbd-client.c's socket error handling code paths. In particular, this serves as a regression test to make sure nbd-client.c doesn't cause an infinite loop by leaving its nbd_receive_reply() fd handler registered after the connection has been closed. This bug was fixed in an earlier patch. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-26 18:30:20 +04:00
=== Check disconnect 4 reply ===
nbd: Use new qio_channel_*_all() functions Rather than open-coding our own read/write-all functions, we can make use of the recently-added qio code. It slightly changes the error message in one of the iotests. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20170905191114.5959-4-eblake@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
2017-09-05 22:11:14 +03:00
Unexpected end-of-file before all bytes were read
nbd: Minimal structured read for client Minimal implementation: for structured error only error_report error message. Note that test 83 is now more verbose, because the implementation prints more warnings about unexpected communication errors; perhaps future patches should tone things down by using trace messages instead of traces, but the common case of successful communication is no noisier than before. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20171027104037.8319-13-eblake@redhat.com>
2017-10-27 13:40:37 +03:00
Connection closed
iotests: Fix 083 As of 8f9e835fd2e687d2bfe936819c3494af4343614d, probing should be disabled in the qemu-iotests (at least when using qemu-io). This broke 083's reference output (which consisted mostly of "Could not read image for determining its format"). This patch fixes it. Note that one case which failed before is now successful: Disconnect after data. This is due to qemu having read twice before (once for probing, once for the qemu-io read command), but only once now (the qemu-io read command). Therefore, reading is successful (which is correct). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-01-27 05:02:56 +03:00
read failed: Input/output error
qemu-iotests: add 083 NBD client disconnect tests This new test case uses nbd-fault-injector.py to simulate broken TCP connections at each stage in the NBD protocol. This way we can exercise block/nbd-client.c's socket error handling code paths. In particular, this serves as a regression test to make sure nbd-client.c doesn't cause an infinite loop by leaving its nbd_receive_reply() fd handler registered after the connection has been closed. This bug was fixed in an earlier patch. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-26 18:30:20 +04:00
=== Check disconnect 8 reply ===
nbd: Use new qio_channel_*_all() functions Rather than open-coding our own read/write-all functions, we can make use of the recently-added qio code. It slightly changes the error message in one of the iotests. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20170905191114.5959-4-eblake@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
2017-09-05 22:11:14 +03:00
Unexpected end-of-file before all bytes were read
nbd: Minimal structured read for client Minimal implementation: for structured error only error_report error message. Note that test 83 is now more verbose, because the implementation prints more warnings about unexpected communication errors; perhaps future patches should tone things down by using trace messages instead of traces, but the common case of successful communication is no noisier than before. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20171027104037.8319-13-eblake@redhat.com>
2017-10-27 13:40:37 +03:00
Connection closed
iotests: Fix 083 As of 8f9e835fd2e687d2bfe936819c3494af4343614d, probing should be disabled in the qemu-iotests (at least when using qemu-io). This broke 083's reference output (which consisted mostly of "Could not read image for determining its format"). This patch fixes it. Note that one case which failed before is now successful: Disconnect after data. This is due to qemu having read twice before (once for probing, once for the qemu-io read command), but only once now (the qemu-io read command). Therefore, reading is successful (which is correct). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-01-27 05:02:56 +03:00
read failed: Input/output error
qemu-iotests: add 083 NBD client disconnect tests This new test case uses nbd-fault-injector.py to simulate broken TCP connections at each stage in the NBD protocol. This way we can exercise block/nbd-client.c's socket error handling code paths. In particular, this serves as a regression test to make sure nbd-client.c doesn't cause an infinite loop by leaving its nbd_receive_reply() fd handler registered after the connection has been closed. This bug was fixed in an earlier patch. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-26 18:30:20 +04:00
=== Check disconnect before data ===
nbd: Minimal structured read for client Minimal implementation: for structured error only error_report error message. Note that test 83 is now more verbose, because the implementation prints more warnings about unexpected communication errors; perhaps future patches should tone things down by using trace messages instead of traces, but the common case of successful communication is no noisier than before. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20171027104037.8319-13-eblake@redhat.com>
2017-10-27 13:40:37 +03:00
Unexpected end-of-file before all bytes were read
iotests: Fix 083 As of 8f9e835fd2e687d2bfe936819c3494af4343614d, probing should be disabled in the qemu-iotests (at least when using qemu-io). This broke 083's reference output (which consisted mostly of "Could not read image for determining its format"). This patch fixes it. Note that one case which failed before is now successful: Disconnect after data. This is due to qemu having read twice before (once for probing, once for the qemu-io read command), but only once now (the qemu-io read command). Therefore, reading is successful (which is correct). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-01-27 05:02:56 +03:00
read failed: Input/output error
qemu-iotests: add 083 NBD client disconnect tests This new test case uses nbd-fault-injector.py to simulate broken TCP connections at each stage in the NBD protocol. This way we can exercise block/nbd-client.c's socket error handling code paths. In particular, this serves as a regression test to make sure nbd-client.c doesn't cause an infinite loop by leaving its nbd_receive_reply() fd handler registered after the connection has been closed. This bug was fixed in an earlier patch. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-26 18:30:20 +04:00
=== Check disconnect after data ===
iotests: Fix 083 As of 8f9e835fd2e687d2bfe936819c3494af4343614d, probing should be disabled in the qemu-iotests (at least when using qemu-io). This broke 083's reference output (which consisted mostly of "Could not read image for determining its format"). This patch fixes it. Note that one case which failed before is now successful: Disconnect after data. This is due to qemu having read twice before (once for probing, once for the qemu-io read command), but only once now (the qemu-io read command). Therefore, reading is successful (which is correct). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-01-27 05:02:56 +03:00
read 512/512 bytes at offset 0
512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
qemu-iotests: add 083 NBD client disconnect tests This new test case uses nbd-fault-injector.py to simulate broken TCP connections at each stage in the NBD protocol. This way we can exercise block/nbd-client.c's socket error handling code paths. In particular, this serves as a regression test to make sure nbd-client.c doesn't cause an infinite loop by leaving its nbd_receive_reply() fd handler registered after the connection has been closed. This bug was fixed in an earlier patch. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-26 18:30:20 +04:00
=== Check disconnect before neg-classic ===
qemu-iotests: test NBD over UNIX domain sockets in 083 083 only tests TCP. Some failures might be specific to UNIX domain sockets. A few adjustments are necessary: 1. Generating a port number and waiting for server startup is TCP-specific. Use the new nbd-fault-injector.py startup protocol to fetch the address. This is a little more elegant because we don't need netstat anymore. 2. The NBD filter does not work for the UNIX domain sockets URIs we generate and must be extended. 3. Run all tests twice: once for TCP and once for UNIX domain sockets. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20170829122745.14309-4-stefanha@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2017-08-29 15:27:45 +03:00
can't open device nbd+tcp://127.0.0.1:PORT/
qemu-iotests: add 083 NBD client disconnect tests This new test case uses nbd-fault-injector.py to simulate broken TCP connections at each stage in the NBD protocol. This way we can exercise block/nbd-client.c's socket error handling code paths. In particular, this serves as a regression test to make sure nbd-client.c doesn't cause an infinite loop by leaving its nbd_receive_reply() fd handler registered after the connection has been closed. This bug was fixed in an earlier patch. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-26 18:30:20 +04:00
=== Check disconnect 8 neg-classic ===
qemu-iotests: test NBD over UNIX domain sockets in 083 083 only tests TCP. Some failures might be specific to UNIX domain sockets. A few adjustments are necessary: 1. Generating a port number and waiting for server startup is TCP-specific. Use the new nbd-fault-injector.py startup protocol to fetch the address. This is a little more elegant because we don't need netstat anymore. 2. The NBD filter does not work for the UNIX domain sockets URIs we generate and must be extended. 3. Run all tests twice: once for TCP and once for UNIX domain sockets. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20170829122745.14309-4-stefanha@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2017-08-29 15:27:45 +03:00
can't open device nbd+tcp://127.0.0.1:PORT/
qemu-iotests: add 083 NBD client disconnect tests This new test case uses nbd-fault-injector.py to simulate broken TCP connections at each stage in the NBD protocol. This way we can exercise block/nbd-client.c's socket error handling code paths. In particular, this serves as a regression test to make sure nbd-client.c doesn't cause an infinite loop by leaving its nbd_receive_reply() fd handler registered after the connection has been closed. This bug was fixed in an earlier patch. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-26 18:30:20 +04:00
=== Check disconnect 16 neg-classic ===
qemu-iotests: test NBD over UNIX domain sockets in 083 083 only tests TCP. Some failures might be specific to UNIX domain sockets. A few adjustments are necessary: 1. Generating a port number and waiting for server startup is TCP-specific. Use the new nbd-fault-injector.py startup protocol to fetch the address. This is a little more elegant because we don't need netstat anymore. 2. The NBD filter does not work for the UNIX domain sockets URIs we generate and must be extended. 3. Run all tests twice: once for TCP and once for UNIX domain sockets. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20170829122745.14309-4-stefanha@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2017-08-29 15:27:45 +03:00
can't open device nbd+tcp://127.0.0.1:PORT/
qemu-iotests: add 083 NBD client disconnect tests This new test case uses nbd-fault-injector.py to simulate broken TCP connections at each stage in the NBD protocol. This way we can exercise block/nbd-client.c's socket error handling code paths. In particular, this serves as a regression test to make sure nbd-client.c doesn't cause an infinite loop by leaving its nbd_receive_reply() fd handler registered after the connection has been closed. This bug was fixed in an earlier patch. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-26 18:30:20 +04:00
=== Check disconnect 24 neg-classic ===
qemu-iotests: test NBD over UNIX domain sockets in 083 083 only tests TCP. Some failures might be specific to UNIX domain sockets. A few adjustments are necessary: 1. Generating a port number and waiting for server startup is TCP-specific. Use the new nbd-fault-injector.py startup protocol to fetch the address. This is a little more elegant because we don't need netstat anymore. 2. The NBD filter does not work for the UNIX domain sockets URIs we generate and must be extended. 3. Run all tests twice: once for TCP and once for UNIX domain sockets. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20170829122745.14309-4-stefanha@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2017-08-29 15:27:45 +03:00
can't open device nbd+tcp://127.0.0.1:PORT/
qemu-iotests: add 083 NBD client disconnect tests This new test case uses nbd-fault-injector.py to simulate broken TCP connections at each stage in the NBD protocol. This way we can exercise block/nbd-client.c's socket error handling code paths. In particular, this serves as a regression test to make sure nbd-client.c doesn't cause an infinite loop by leaving its nbd_receive_reply() fd handler registered after the connection has been closed. This bug was fixed in an earlier patch. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-26 18:30:20 +04:00
=== Check disconnect 28 neg-classic ===
qemu-iotests: test NBD over UNIX domain sockets in 083 083 only tests TCP. Some failures might be specific to UNIX domain sockets. A few adjustments are necessary: 1. Generating a port number and waiting for server startup is TCP-specific. Use the new nbd-fault-injector.py startup protocol to fetch the address. This is a little more elegant because we don't need netstat anymore. 2. The NBD filter does not work for the UNIX domain sockets URIs we generate and must be extended. 3. Run all tests twice: once for TCP and once for UNIX domain sockets. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20170829122745.14309-4-stefanha@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2017-08-29 15:27:45 +03:00
can't open device nbd+tcp://127.0.0.1:PORT/
=== Check disconnect after neg-classic ===
iotests: Make nbd-fault-injector flush When closing a connection, make the nbd-fault-injector flush the socket. Without this, the output is a bit unreliable with Python 3. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20181022135307.14398-2-mreitz@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-22 16:52:59 +03:00
Unable to read from socket: Connection reset by peer
nbd: Minimal structured read for client Minimal implementation: for structured error only error_report error message. Note that test 83 is now more verbose, because the implementation prints more warnings about unexpected communication errors; perhaps future patches should tone things down by using trace messages instead of traces, but the common case of successful communication is no noisier than before. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20171027104037.8319-13-eblake@redhat.com>
2017-10-27 13:40:37 +03:00
Connection closed
qemu-iotests: test NBD over UNIX domain sockets in 083 083 only tests TCP. Some failures might be specific to UNIX domain sockets. A few adjustments are necessary: 1. Generating a port number and waiting for server startup is TCP-specific. Use the new nbd-fault-injector.py startup protocol to fetch the address. This is a little more elegant because we don't need netstat anymore. 2. The NBD filter does not work for the UNIX domain sockets URIs we generate and must be extended. 3. Run all tests twice: once for TCP and once for UNIX domain sockets. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20170829122745.14309-4-stefanha@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2017-08-29 15:27:45 +03:00
read failed: Input/output error
=== Check disconnect before neg1 ===
can't open device nbd+unix:///foo?socket=TEST_DIR/nbd.sock
=== Check disconnect after neg1 ===
can't open device nbd+unix:///foo?socket=TEST_DIR/nbd.sock
=== Check disconnect 8 neg1 ===
can't open device nbd+unix:///foo?socket=TEST_DIR/nbd.sock
=== Check disconnect 16 neg1 ===
can't open device nbd+unix:///foo?socket=TEST_DIR/nbd.sock
=== Check disconnect before export ===
can't open device nbd+unix:///foo?socket=TEST_DIR/nbd.sock
=== Check disconnect after export ===
can't open device nbd+unix:///foo?socket=TEST_DIR/nbd.sock
=== Check disconnect 4 export ===
can't open device nbd+unix:///foo?socket=TEST_DIR/nbd.sock
=== Check disconnect 12 export ===
can't open device nbd+unix:///foo?socket=TEST_DIR/nbd.sock
=== Check disconnect 16 export ===
can't open device nbd+unix:///foo?socket=TEST_DIR/nbd.sock
=== Check disconnect before neg2 ===
can't open device nbd+unix:///foo?socket=TEST_DIR/nbd.sock
=== Check disconnect after neg2 ===
iotests: Make nbd-fault-injector flush When closing a connection, make the nbd-fault-injector flush the socket. Without this, the output is a bit unreliable with Python 3. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20181022135307.14398-2-mreitz@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-22 16:52:59 +03:00
Unable to read from socket: Connection reset by peer
Connection closed
qemu-iotests: test NBD over UNIX domain sockets in 083 083 only tests TCP. Some failures might be specific to UNIX domain sockets. A few adjustments are necessary: 1. Generating a port number and waiting for server startup is TCP-specific. Use the new nbd-fault-injector.py startup protocol to fetch the address. This is a little more elegant because we don't need netstat anymore. 2. The NBD filter does not work for the UNIX domain sockets URIs we generate and must be extended. 3. Run all tests twice: once for TCP and once for UNIX domain sockets. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20170829122745.14309-4-stefanha@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2017-08-29 15:27:45 +03:00
read failed: Input/output error
=== Check disconnect 8 neg2 ===
can't open device nbd+unix:///foo?socket=TEST_DIR/nbd.sock
=== Check disconnect 10 neg2 ===
can't open device nbd+unix:///foo?socket=TEST_DIR/nbd.sock
=== Check disconnect before request ===
iotests: Make nbd-fault-injector flush When closing a connection, make the nbd-fault-injector flush the socket. Without this, the output is a bit unreliable with Python 3. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20181022135307.14398-2-mreitz@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-22 16:52:59 +03:00
Unable to read from socket: Connection reset by peer
Connection closed
qemu-iotests: test NBD over UNIX domain sockets in 083 083 only tests TCP. Some failures might be specific to UNIX domain sockets. A few adjustments are necessary: 1. Generating a port number and waiting for server startup is TCP-specific. Use the new nbd-fault-injector.py startup protocol to fetch the address. This is a little more elegant because we don't need netstat anymore. 2. The NBD filter does not work for the UNIX domain sockets URIs we generate and must be extended. 3. Run all tests twice: once for TCP and once for UNIX domain sockets. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20170829122745.14309-4-stefanha@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2017-08-29 15:27:45 +03:00
read failed: Input/output error
=== Check disconnect after request ===
nbd: Minimal structured read for client Minimal implementation: for structured error only error_report error message. Note that test 83 is now more verbose, because the implementation prints more warnings about unexpected communication errors; perhaps future patches should tone things down by using trace messages instead of traces, but the common case of successful communication is no noisier than before. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20171027104037.8319-13-eblake@redhat.com>
2017-10-27 13:40:37 +03:00
Connection closed
qemu-iotests: test NBD over UNIX domain sockets in 083 083 only tests TCP. Some failures might be specific to UNIX domain sockets. A few adjustments are necessary: 1. Generating a port number and waiting for server startup is TCP-specific. Use the new nbd-fault-injector.py startup protocol to fetch the address. This is a little more elegant because we don't need netstat anymore. 2. The NBD filter does not work for the UNIX domain sockets URIs we generate and must be extended. 3. Run all tests twice: once for TCP and once for UNIX domain sockets. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20170829122745.14309-4-stefanha@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2017-08-29 15:27:45 +03:00
read failed: Input/output error
=== Check disconnect before reply ===
nbd: Minimal structured read for client Minimal implementation: for structured error only error_report error message. Note that test 83 is now more verbose, because the implementation prints more warnings about unexpected communication errors; perhaps future patches should tone things down by using trace messages instead of traces, but the common case of successful communication is no noisier than before. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20171027104037.8319-13-eblake@redhat.com>
2017-10-27 13:40:37 +03:00
Connection closed
qemu-iotests: test NBD over UNIX domain sockets in 083 083 only tests TCP. Some failures might be specific to UNIX domain sockets. A few adjustments are necessary: 1. Generating a port number and waiting for server startup is TCP-specific. Use the new nbd-fault-injector.py startup protocol to fetch the address. This is a little more elegant because we don't need netstat anymore. 2. The NBD filter does not work for the UNIX domain sockets URIs we generate and must be extended. 3. Run all tests twice: once for TCP and once for UNIX domain sockets. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20170829122745.14309-4-stefanha@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2017-08-29 15:27:45 +03:00
read failed: Input/output error
=== Check disconnect after reply ===
nbd: Minimal structured read for client Minimal implementation: for structured error only error_report error message. Note that test 83 is now more verbose, because the implementation prints more warnings about unexpected communication errors; perhaps future patches should tone things down by using trace messages instead of traces, but the common case of successful communication is no noisier than before. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20171027104037.8319-13-eblake@redhat.com>
2017-10-27 13:40:37 +03:00
Unexpected end-of-file before all bytes were read
qemu-iotests: test NBD over UNIX domain sockets in 083 083 only tests TCP. Some failures might be specific to UNIX domain sockets. A few adjustments are necessary: 1. Generating a port number and waiting for server startup is TCP-specific. Use the new nbd-fault-injector.py startup protocol to fetch the address. This is a little more elegant because we don't need netstat anymore. 2. The NBD filter does not work for the UNIX domain sockets URIs we generate and must be extended. 3. Run all tests twice: once for TCP and once for UNIX domain sockets. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20170829122745.14309-4-stefanha@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2017-08-29 15:27:45 +03:00
read failed: Input/output error
=== Check disconnect 4 reply ===
nbd: Use new qio_channel_*_all() functions Rather than open-coding our own read/write-all functions, we can make use of the recently-added qio code. It slightly changes the error message in one of the iotests. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20170905191114.5959-4-eblake@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
2017-09-05 22:11:14 +03:00
Unexpected end-of-file before all bytes were read
nbd: Minimal structured read for client Minimal implementation: for structured error only error_report error message. Note that test 83 is now more verbose, because the implementation prints more warnings about unexpected communication errors; perhaps future patches should tone things down by using trace messages instead of traces, but the common case of successful communication is no noisier than before. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20171027104037.8319-13-eblake@redhat.com>
2017-10-27 13:40:37 +03:00
Connection closed
qemu-iotests: test NBD over UNIX domain sockets in 083 083 only tests TCP. Some failures might be specific to UNIX domain sockets. A few adjustments are necessary: 1. Generating a port number and waiting for server startup is TCP-specific. Use the new nbd-fault-injector.py startup protocol to fetch the address. This is a little more elegant because we don't need netstat anymore. 2. The NBD filter does not work for the UNIX domain sockets URIs we generate and must be extended. 3. Run all tests twice: once for TCP and once for UNIX domain sockets. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20170829122745.14309-4-stefanha@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2017-08-29 15:27:45 +03:00
read failed: Input/output error
=== Check disconnect 8 reply ===
nbd: Use new qio_channel_*_all() functions Rather than open-coding our own read/write-all functions, we can make use of the recently-added qio code. It slightly changes the error message in one of the iotests. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20170905191114.5959-4-eblake@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
2017-09-05 22:11:14 +03:00
Unexpected end-of-file before all bytes were read
nbd: Minimal structured read for client Minimal implementation: for structured error only error_report error message. Note that test 83 is now more verbose, because the implementation prints more warnings about unexpected communication errors; perhaps future patches should tone things down by using trace messages instead of traces, but the common case of successful communication is no noisier than before. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20171027104037.8319-13-eblake@redhat.com>
2017-10-27 13:40:37 +03:00
Connection closed
qemu-iotests: test NBD over UNIX domain sockets in 083 083 only tests TCP. Some failures might be specific to UNIX domain sockets. A few adjustments are necessary: 1. Generating a port number and waiting for server startup is TCP-specific. Use the new nbd-fault-injector.py startup protocol to fetch the address. This is a little more elegant because we don't need netstat anymore. 2. The NBD filter does not work for the UNIX domain sockets URIs we generate and must be extended. 3. Run all tests twice: once for TCP and once for UNIX domain sockets. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20170829122745.14309-4-stefanha@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2017-08-29 15:27:45 +03:00
read failed: Input/output error
=== Check disconnect before data ===
nbd: Minimal structured read for client Minimal implementation: for structured error only error_report error message. Note that test 83 is now more verbose, because the implementation prints more warnings about unexpected communication errors; perhaps future patches should tone things down by using trace messages instead of traces, but the common case of successful communication is no noisier than before. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20171027104037.8319-13-eblake@redhat.com>
2017-10-27 13:40:37 +03:00
Unexpected end-of-file before all bytes were read
qemu-iotests: test NBD over UNIX domain sockets in 083 083 only tests TCP. Some failures might be specific to UNIX domain sockets. A few adjustments are necessary: 1. Generating a port number and waiting for server startup is TCP-specific. Use the new nbd-fault-injector.py startup protocol to fetch the address. This is a little more elegant because we don't need netstat anymore. 2. The NBD filter does not work for the UNIX domain sockets URIs we generate and must be extended. 3. Run all tests twice: once for TCP and once for UNIX domain sockets. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20170829122745.14309-4-stefanha@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2017-08-29 15:27:45 +03:00
read failed: Input/output error
=== Check disconnect after data ===
read 512/512 bytes at offset 0
512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
=== Check disconnect before neg-classic ===
can't open device nbd+unix:///?socket=TEST_DIR/nbd.sock
=== Check disconnect 8 neg-classic ===
can't open device nbd+unix:///?socket=TEST_DIR/nbd.sock
=== Check disconnect 16 neg-classic ===
can't open device nbd+unix:///?socket=TEST_DIR/nbd.sock
=== Check disconnect 24 neg-classic ===
can't open device nbd+unix:///?socket=TEST_DIR/nbd.sock
=== Check disconnect 28 neg-classic ===
can't open device nbd+unix:///?socket=TEST_DIR/nbd.sock
qemu-iotests: add 083 NBD client disconnect tests This new test case uses nbd-fault-injector.py to simulate broken TCP connections at each stage in the NBD protocol. This way we can exercise block/nbd-client.c's socket error handling code paths. In particular, this serves as a regression test to make sure nbd-client.c doesn't cause an infinite loop by leaving its nbd_receive_reply() fd handler registered after the connection has been closed. This bug was fixed in an earlier patch. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-26 18:30:20 +04:00
=== Check disconnect after neg-classic ===
iotests: Make nbd-fault-injector flush When closing a connection, make the nbd-fault-injector flush the socket. Without this, the output is a bit unreliable with Python 3. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20181022135307.14398-2-mreitz@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-22 16:52:59 +03:00
Unable to read from socket: Connection reset by peer
Connection closed
iotests: Fix 083 As of 8f9e835fd2e687d2bfe936819c3494af4343614d, probing should be disabled in the qemu-iotests (at least when using qemu-io). This broke 083's reference output (which consisted mostly of "Could not read image for determining its format"). This patch fixes it. Note that one case which failed before is now successful: Disconnect after data. This is due to qemu having read twice before (once for probing, once for the qemu-io read command), but only once now (the qemu-io read command). Therefore, reading is successful (which is correct). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-01-27 05:02:56 +03:00
read failed: Input/output error
qemu-iotests: add 083 NBD client disconnect tests This new test case uses nbd-fault-injector.py to simulate broken TCP connections at each stage in the NBD protocol. This way we can exercise block/nbd-client.c's socket error handling code paths. In particular, this serves as a regression test to make sure nbd-client.c doesn't cause an infinite loop by leaving its nbd_receive_reply() fd handler registered after the connection has been closed. This bug was fixed in an earlier patch. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-26 18:30:20 +04:00
*** done
Reference in New Issue Copy Permalink