qemu/hw/pci/pci-hotplug-old.c

338 lines
9.8 KiB
C
Raw Normal View History

/*
* Deprecated PCI hotplug interface support
* This covers the old pci_add / pci_del command, whereas the more general
* device_add / device_del commands are now preferred.
*
* Copyright (c) 2004 Fabrice Bellard
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "hw/hw.h"
#include "hw/boards.h"
#include "hw/pci/pci.h"
#include "net/net.h"
#include "hw/i386/pc.h"
#include "monitor/monitor.h"
#include "hw/scsi/scsi.h"
#include "hw/virtio/virtio-blk.h"
#include "qemu/config-file.h"
#include "sysemu/blockdev.h"
#include "qapi/error.h"
static int pci_read_devaddr(Monitor *mon, const char *addr,
int *busp, unsigned *slotp)
{
int dom;
/* strip legacy tag */
if (!strncmp(addr, "pci_addr=", 9)) {
addr += 9;
}
if (pci_parse_devaddr(addr, &dom, busp, slotp, NULL)) {
monitor_printf(mon, "Invalid pci address\n");
return -1;
}
if (dom != 0) {
monitor_printf(mon, "Multiple PCI domains not supported, use device_add\n");
return -1;
}
return 0;
}
static PCIDevice *qemu_pci_hot_add_nic(Monitor *mon,
const char *devaddr,
const char *opts_str)
{
Error *local_err = NULL;
QemuOpts *opts;
PCIBus *root = pci_find_primary_bus();
PCIBus *bus;
int ret, devfn;
if (!root) {
monitor_printf(mon, "no primary PCI bus (if there are multiple"
" PCI roots, you must use device_add instead)");
return NULL;
}
bus = pci_get_bus_devfn(&devfn, root, devaddr);
if (!bus) {
monitor_printf(mon, "Invalid PCI device address %s\n", devaddr);
return NULL;
}
if (!((BusState*)bus)->allow_hotplug) {
monitor_printf(mon, "PCI bus doesn't support hotplug\n");
return NULL;
}
opts = qemu_opts_parse(qemu_find_opts("net"), opts_str ? opts_str : "", 0);
if (!opts) {
return NULL;
}
qemu_opt_set(opts, "type", "nic");
ret = net_client_init(opts, 0, &local_err);
if (local_err) {
qerror_report_err(local_err);
error_free(local_err);
return NULL;
}
if (nd_table[ret].devaddr) {
monitor_printf(mon, "Parameter addr not supported\n");
return NULL;
}
return pci_nic_init(&nd_table[ret], root, "rtl8139", devaddr);
}
static int scsi_hot_add(Monitor *mon, DeviceState *adapter,
DriveInfo *dinfo, int printinfo)
{
SCSIBus *scsibus;
SCSIDevice *scsidev;
scsibus = (SCSIBus *)
object_dynamic_cast(OBJECT(QLIST_FIRST(&adapter->child_bus)),
TYPE_SCSI_BUS);
if (!scsibus) {
error_report("Device is not a SCSI adapter");
return -1;
}
/*
* drive_init() tries to find a default for dinfo->unit. Doesn't
* work at all for hotplug though as we assign the device to a
* specific bus instead of the first bus with spare scsi ids.
*
* Ditch the calculated value and reload from option string (if
* specified).
*/
dinfo->unit = qemu_opt_get_number(dinfo->opts, "unit", -1);
dinfo->bus = scsibus->busnr;
scsidev = scsi_bus_legacy_add_drive(scsibus, dinfo->bdrv, dinfo->unit,
false, -1, NULL, NULL);
if (!scsidev) {
return -1;
}
dinfo->unit = scsidev->id;
if (printinfo)
monitor_printf(mon, "OK bus %d, unit %d\n",
scsibus->busnr, scsidev->id);
return 0;
}
int pci_drive_hot_add(Monitor *mon, const QDict *qdict, DriveInfo *dinfo)
{
int pci_bus;
unsigned slot;
PCIBus *root = pci_find_primary_bus();
PCIDevice *dev;
const char *pci_addr = qdict_get_str(qdict, "pci_addr");
switch (dinfo->type) {
case IF_SCSI:
if (!root) {
monitor_printf(mon, "no primary PCI bus (if there are multiple"
" PCI roots, you must use device_add instead)");
goto err;
}
if (pci_read_devaddr(mon, pci_addr, &pci_bus, &slot)) {
goto err;
}
dev = pci_find_device(root, pci_bus, PCI_DEVFN(slot, 0));
if (!dev) {
monitor_printf(mon, "no pci device with address %s\n", pci_addr);
goto err;
}
if (scsi_hot_add(mon, &dev->qdev, dinfo, 1) != 0) {
goto err;
}
break;
default:
monitor_printf(mon, "Can't hot-add drive to type %d\n", dinfo->type);
goto err;
}
return 0;
err:
return -1;
}
static PCIDevice *qemu_pci_hot_add_storage(Monitor *mon,
const char *devaddr,
const char *opts)
{
PCIDevice *dev;
DriveInfo *dinfo = NULL;
int type = -1;
char buf[128];
PCIBus *root = pci_find_primary_bus();
PCIBus *bus;
int devfn;
if (get_param_value(buf, sizeof(buf), "if", opts)) {
if (!strcmp(buf, "scsi"))
type = IF_SCSI;
else if (!strcmp(buf, "virtio")) {
type = IF_VIRTIO;
} else {
monitor_printf(mon, "type %s not a hotpluggable PCI device.\n", buf);
return NULL;
}
} else {
monitor_printf(mon, "no if= specified\n");
return NULL;
}
if (get_param_value(buf, sizeof(buf), "file", opts)) {
dinfo = add_init_drive(opts);
if (!dinfo)
return NULL;
if (dinfo->devaddr) {
monitor_printf(mon, "Parameter addr not supported\n");
return NULL;
}
} else {
dinfo = NULL;
}
if (!root) {
monitor_printf(mon, "no primary PCI bus (if there are multiple"
" PCI roots, you must use device_add instead)");
return NULL;
}
bus = pci_get_bus_devfn(&devfn, root, devaddr);
if (!bus) {
monitor_printf(mon, "Invalid PCI device address %s\n", devaddr);
return NULL;
}
if (!((BusState*)bus)->allow_hotplug) {
monitor_printf(mon, "PCI bus doesn't support hotplug\n");
return NULL;
}
switch (type) {
case IF_SCSI:
dev = pci_create(bus, devfn, "lsi53c895a");
if (qdev_init(&dev->qdev) < 0)
dev = NULL;
if (dev && dinfo) {
if (scsi_hot_add(mon, &dev->qdev, dinfo, 0) != 0) {
qdev_unplug(&dev->qdev, NULL);
dev = NULL;
}
}
break;
case IF_VIRTIO:
if (!dinfo) {
monitor_printf(mon, "virtio requires a backing file/device.\n");
return NULL;
}
dev = pci_create(bus, devfn, "virtio-blk-pci");
if (qdev_prop_set_drive(&dev->qdev, "drive", dinfo->bdrv) < 0) {
object_unparent(OBJECT(dev));
dev = NULL;
break;
}
if (qdev_init(&dev->qdev) < 0)
dev = NULL;
break;
default:
dev = NULL;
}
return dev;
}
void pci_device_hot_add(Monitor *mon, const QDict *qdict)
{
PCIDevice *dev = NULL;
const char *pci_addr = qdict_get_str(qdict, "pci_addr");
const char *type = qdict_get_str(qdict, "type");
const char *opts = qdict_get_try_str(qdict, "opts");
/* strip legacy tag */
if (!strncmp(pci_addr, "pci_addr=", 9)) {
pci_addr += 9;
}
if (!opts) {
opts = "";
}
if (!strcmp(pci_addr, "auto"))
pci_addr = NULL;
if (strcmp(type, "nic") == 0) {
dev = qemu_pci_hot_add_nic(mon, pci_addr, opts);
} else if (strcmp(type, "storage") == 0) {
dev = qemu_pci_hot_add_storage(mon, pci_addr, opts);
} else {
monitor_printf(mon, "invalid type: %s\n", type);
}
if (dev) {
pci: Replace pci_find_domain() with more general pci_root_bus_path() pci_find_domain() is used in a number of places where we want an id for a whole PCI domain (i.e. the subtree under a PCI root bus). The trouble is that many platforms may support multiple independent host bridges with no hardware supplied notion of domain number. This patch, therefore, replaces calls to pci_find_domain() with calls to a new pci_root_bus_path() returning a string. The new call is implemented in terms of a new callback in the host bridge class, so it can be defined in some way that's well defined for the platform. When no callback is available we fall back on the qbus name. Most current uses of pci_find_domain() are for error or informational messages, so the change in identifiers should be harmless. The exception is pci_get_dev_path(), whose results form part of migration streams. To maintain compatibility with old migration streams, the PIIX PCI host is altered to always supply "0000" for this path, which matches the old domain number (since the code didn't actually support domains other than 0). For the pseries (spapr) PCI bridge we use a different platform-unique identifier (pseries machines can routinely have dozens of PCI host bridges). Theoretically that breaks migration streams, but given that we don't yet have migration support for pseries, it doesn't matter. Any other machines that have working migration support including PCI devices will need to be updated to maintain migration stream compatibility. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-06 12:48:49 +04:00
monitor_printf(mon, "OK root bus %s, bus %d, slot %d, function %d\n",
pci_root_bus_path(dev),
pci_bus_num(dev->bus), PCI_SLOT(dev->devfn),
PCI_FUNC(dev->devfn));
} else
monitor_printf(mon, "failed to add %s\n", opts);
}
static int pci_device_hot_remove(Monitor *mon, const char *pci_addr)
{
PCIBus *root = pci_find_primary_bus();
PCIDevice *d;
int bus;
unsigned slot;
Error *local_err = NULL;
if (!root) {
monitor_printf(mon, "no primary PCI bus (if there are multiple"
" PCI roots, you must use device_del instead)");
return -1;
}
if (pci_read_devaddr(mon, pci_addr, &bus, &slot)) {
return -1;
}
d = pci_find_device(root, bus, PCI_DEVFN(slot, 0));
if (!d) {
monitor_printf(mon, "slot %d empty\n", slot);
return -1;
}
qdev_unplug(&d->qdev, &local_err);
if (local_err) {
monitor_printf(mon, "%s\n", error_get_pretty(local_err));
error_free(local_err);
return -1;
}
return 0;
}
void do_pci_device_hot_remove(Monitor *mon, const QDict *qdict)
{
pci_device_hot_remove(mon, qdict_get_str(qdict, "pci_addr"));
}