qemu/tests/qemu-iotests/267.out

183 lines
7.4 KiB
Plaintext
Raw Normal View History

QA output created by 267
=== No block devices at all ===
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
Testing:
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) savevm snap0
Error: No block device can accept snapshots
(qemu) info snapshots
No available block device supports snapshots
(qemu) loadvm snap0
Error: No block device supports snapshots
(qemu) quit
=== -drive if=none ===
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
Testing: -drive driver=file,file=TEST_DIR/t.IMGFMT,if=none
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) savevm snap0
Error: Device 'none0' is writable but does not support snapshots
(qemu) info snapshots
No available block device supports snapshots
(qemu) loadvm snap0
Error: Device 'none0' is writable but does not support snapshots
(qemu) quit
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
Testing: -drive driver=IMGFMT,file=TEST_DIR/t.IMGFMT,if=none
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) savevm snap0
(qemu) info snapshots
List of snapshots present on all disks:
ID TAG VM SIZE DATE VM CLOCK
-- snap0 SIZE yyyy-mm-dd hh:mm:ss 00:00:00.000
(qemu) loadvm snap0
(qemu) quit
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
Testing: -drive driver=IMGFMT,file=TEST_DIR/t.IMGFMT,if=none -device virtio-blk,drive=none0
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) savevm snap0
(qemu) info snapshots
List of snapshots present on all disks:
ID TAG VM SIZE DATE VM CLOCK
-- snap0 SIZE yyyy-mm-dd hh:mm:ss 00:00:00.000
(qemu) loadvm snap0
(qemu) quit
=== -drive if=virtio ===
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
Testing: -drive driver=file,file=TEST_DIR/t.IMGFMT,if=virtio
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) savevm snap0
Error: Device 'virtio0' is writable but does not support snapshots
(qemu) info snapshots
No available block device supports snapshots
(qemu) loadvm snap0
Error: Device 'virtio0' is writable but does not support snapshots
(qemu) quit
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
Testing: -drive driver=IMGFMT,file=TEST_DIR/t.IMGFMT,if=virtio
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) savevm snap0
(qemu) info snapshots
List of snapshots present on all disks:
ID TAG VM SIZE DATE VM CLOCK
-- snap0 SIZE yyyy-mm-dd hh:mm:ss 00:00:00.000
(qemu) loadvm snap0
(qemu) quit
=== Simple -blockdev ===
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
Testing: -blockdev driver=file,filename=TEST_DIR/t.IMGFMT,node-name=file
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) savevm snap0
Error: Device '' is writable but does not support snapshots
(qemu) info snapshots
No available block device supports snapshots
(qemu) loadvm snap0
Error: Device '' is writable but does not support snapshots
(qemu) quit
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
Testing: -blockdev driver=file,filename=TEST_DIR/t.IMGFMT,node-name=file -blockdev driver=IMGFMT,file=file,node-name=fmt
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) savevm snap0
(qemu) info snapshots
List of snapshots present on all disks:
ID TAG VM SIZE DATE VM CLOCK
-- snap0 SIZE yyyy-mm-dd hh:mm:ss 00:00:00.000
(qemu) loadvm snap0
(qemu) quit
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
Testing: -blockdev driver=file,filename=TEST_DIR/t.IMGFMT,node-name=file -blockdev driver=raw,file=file,node-name=raw -blockdev driver=IMGFMT,file=raw,node-name=fmt
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) savevm snap0
(qemu) info snapshots
List of snapshots present on all disks:
ID TAG VM SIZE DATE VM CLOCK
-- snap0 SIZE yyyy-mm-dd hh:mm:ss 00:00:00.000
(qemu) loadvm snap0
(qemu) quit
=== -blockdev with a filter on top ===
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
Testing: -blockdev driver=file,filename=TEST_DIR/t.IMGFMT,node-name=file -blockdev driver=IMGFMT,file=file,node-name=fmt -blockdev driver=copy-on-read,file=fmt,node-name=filter
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) savevm snap0
(qemu) info snapshots
List of snapshots present on all disks:
ID TAG VM SIZE DATE VM CLOCK
-- snap0 SIZE yyyy-mm-dd hh:mm:ss 00:00:00.000
(qemu) loadvm snap0
(qemu) quit
=== -blockdev with a backing file ===
Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=134217728
iotests: Specify explicit backing format where sensible There are many existing qcow2 images that specify a backing file but no format. This has been the source of CVEs in the past, but has become more prominent of a problem now that libvirt has switched to -blockdev. With older -drive, at least the probing was always done by qemu (so the only risk of a changed format between successive boots of a guest was if qemu was upgraded and probed differently). But with newer -blockdev, libvirt must specify a format; if libvirt guesses raw where the image was formatted, this results in data corruption visible to the guest; conversely, if libvirt guesses qcow2 where qemu was using raw, this can result in potential security holes, so modern libvirt instead refuses to use images without explicit backing format. The change in libvirt to reject images without explicit backing format has pointed out that a number of tools have been far too reliant on probing in the past. It's time to set a better example in our own iotests of properly setting this parameter. iotest calls to create, rebase, and convert are all impacted to some degree. It's a bit annoying that we are inconsistent on command line - while all of those accept -o backing_file=...,backing_fmt=..., the shortcuts are different: create and rebase have -b and -F, while convert has -B but no -F. (amend has no shortcuts, but the previous patch just deprecated the use of amend to change backing chains). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20200706203954.341758-9-eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-07-06 23:39:52 +03:00
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT
Testing: -blockdev driver=file,filename=TEST_DIR/t.IMGFMT.base,node-name=backing-file -blockdev driver=file,filename=TEST_DIR/t.IMGFMT,node-name=file -blockdev driver=IMGFMT,file=file,backing=backing-file,node-name=fmt
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) savevm snap0
(qemu) info snapshots
List of snapshots present on all disks:
ID TAG VM SIZE DATE VM CLOCK
-- snap0 SIZE yyyy-mm-dd hh:mm:ss 00:00:00.000
(qemu) loadvm snap0
(qemu) quit
iotests: Specify explicit backing format where sensible There are many existing qcow2 images that specify a backing file but no format. This has been the source of CVEs in the past, but has become more prominent of a problem now that libvirt has switched to -blockdev. With older -drive, at least the probing was always done by qemu (so the only risk of a changed format between successive boots of a guest was if qemu was upgraded and probed differently). But with newer -blockdev, libvirt must specify a format; if libvirt guesses raw where the image was formatted, this results in data corruption visible to the guest; conversely, if libvirt guesses qcow2 where qemu was using raw, this can result in potential security holes, so modern libvirt instead refuses to use images without explicit backing format. The change in libvirt to reject images without explicit backing format has pointed out that a number of tools have been far too reliant on probing in the past. It's time to set a better example in our own iotests of properly setting this parameter. iotest calls to create, rebase, and convert are all impacted to some degree. It's a bit annoying that we are inconsistent on command line - while all of those accept -o backing_file=...,backing_fmt=..., the shortcuts are different: create and rebase have -b and -F, while convert has -B but no -F. (amend has no shortcuts, but the previous patch just deprecated the use of amend to change backing chains). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20200706203954.341758-9-eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-07-06 23:39:52 +03:00
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT
Testing: -blockdev driver=file,filename=TEST_DIR/t.IMGFMT.base,node-name=backing-file -blockdev driver=IMGFMT,file=backing-file,node-name=backing-fmt -blockdev driver=file,filename=TEST_DIR/t.IMGFMT,node-name=file -blockdev driver=IMGFMT,file=file,backing=backing-fmt,node-name=fmt
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) savevm snap0
(qemu) info snapshots
List of snapshots present on all disks:
ID TAG VM SIZE DATE VM CLOCK
-- snap0 SIZE yyyy-mm-dd hh:mm:ss 00:00:00.000
(qemu) loadvm snap0
(qemu) quit
Internal snapshots on overlay:
Snapshot list:
ID TAG VM SIZE DATE VM CLOCK
1 snap0 SIZE yyyy-mm-dd hh:mm:ss 00:00:00.000
Internal snapshots on backing file:
=== -blockdev with NBD server on the backing file ===
iotests: Specify explicit backing format where sensible There are many existing qcow2 images that specify a backing file but no format. This has been the source of CVEs in the past, but has become more prominent of a problem now that libvirt has switched to -blockdev. With older -drive, at least the probing was always done by qemu (so the only risk of a changed format between successive boots of a guest was if qemu was upgraded and probed differently). But with newer -blockdev, libvirt must specify a format; if libvirt guesses raw where the image was formatted, this results in data corruption visible to the guest; conversely, if libvirt guesses qcow2 where qemu was using raw, this can result in potential security holes, so modern libvirt instead refuses to use images without explicit backing format. The change in libvirt to reject images without explicit backing format has pointed out that a number of tools have been far too reliant on probing in the past. It's time to set a better example in our own iotests of properly setting this parameter. iotest calls to create, rebase, and convert are all impacted to some degree. It's a bit annoying that we are inconsistent on command line - while all of those accept -o backing_file=...,backing_fmt=..., the shortcuts are different: create and rebase have -b and -F, while convert has -B but no -F. (amend has no shortcuts, but the previous patch just deprecated the use of amend to change backing chains). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20200706203954.341758-9-eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-07-06 23:39:52 +03:00
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT
Testing: -blockdev driver=file,filename=TEST_DIR/t.IMGFMT.base,node-name=backing-file -blockdev driver=IMGFMT,file=backing-file,node-name=backing-fmt -blockdev driver=file,filename=TEST_DIR/t.IMGFMT,node-name=file -blockdev driver=IMGFMT,file=file,backing=backing-fmt,node-name=fmt
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) nbd_server_start unix:SOCK_DIR/nbd
(qemu) nbd_server_add -w backing-fmt
(qemu) savevm snap0
(qemu) info snapshots
List of snapshots present on all disks:
ID TAG VM SIZE DATE VM CLOCK
-- snap0 SIZE yyyy-mm-dd hh:mm:ss 00:00:00.000
(qemu) loadvm snap0
(qemu) quit
Internal snapshots on overlay:
Snapshot list:
ID TAG VM SIZE DATE VM CLOCK
1 snap0 SIZE yyyy-mm-dd hh:mm:ss 00:00:00.000
Internal snapshots on backing file:
Snapshot list:
ID TAG VM SIZE DATE VM CLOCK
1 snap0 SIZE yyyy-mm-dd hh:mm:ss 00:00:00.000
*** done