qemu/hw/smbios/smbios.c

1359 lines
42 KiB
C
Raw Normal View History

/*
* SMBIOS Support
*
* Copyright (C) 2009 Hewlett-Packard Development Company, L.P.
* Copyright (C) 2013 Red Hat, Inc.
*
* Authors:
* Alex Williamson <alex.williamson@hp.com>
* Markus Armbruster <armbru@redhat.com>
*
* This work is licensed under the terms of the GNU GPL, version 2. See
* the COPYING file in the top-level directory.
*
* Contributions after 2012-01-13 are licensed under the terms of the
* GNU GPL, version 2 or (at your option) any later version.
*/
#include "qemu/osdep.h"
#include "qemu/units.h"
2016-03-14 11:01:28 +03:00
#include "qapi/error.h"
#include "qemu/config-file.h"
#include "qemu/error-report.h"
#include "qemu/module.h"
#include "qemu/option.h"
#include "sysemu/sysemu.h"
#include "qemu/uuid.h"
#include "hw/firmware/smbios.h"
#include "hw/loader.h"
#include "hw/boards.h"
hw/smbios: support for type 41 (onboard devices extended information) Type 41 defines the attributes of devices that are onboard. The original intent was to imply the BIOS had some level of control over the enablement of the associated devices. If network devices are present in this table, by default, udev will name the corresponding interfaces enoX, X being the instance number. Without such information, udev will fallback to using the PCI ID and this usually gives ens3 or ens4. This can be a bit annoying as the name of the network card may depend on the order of options and may change if a new PCI device is added earlier on the commande line. Being able to provide SMBIOS type 41 entry ensure the name of the interface won't change and helps the user guess the right name without booting a first time. This can be invoked with: $QEMU -netdev user,id=internet -device virtio-net-pci,mac=50:54:00:00:00:42,netdev=internet,id=internet-dev \ -smbios type=41,designation='Onboard LAN',instance=1,kind=ethernet,pcidev=internet-dev The PCI segment is assumed to be 0. This should hold true for most cases. $ dmidecode -t 41 # dmidecode 3.3 Getting SMBIOS data from sysfs. SMBIOS 2.8 present. Handle 0x2900, DMI type 41, 11 bytes Onboard Device Reference Designation: Onboard LAN Type: Ethernet Status: Enabled Type Instance: 1 Bus Address: 0000:00:09.0 $ ip -brief a lo UNKNOWN 127.0.0.1/8 ::1/128 eno1 UP 10.0.2.14/24 fec0::5254:ff:fe00:42/64 fe80::5254:ff:fe00:42/64 Signed-off-by: Vincent Bernat <vincent@bernat.ch> Message-Id: <20210401171138.62970-1-vincent@bernat.ch> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-04-01 20:11:38 +03:00
#include "hw/pci/pci_bus.h"
#include "smbios_build.h"
/* legacy structures and constants for <= 2.0 machines */
struct smbios_header {
uint16_t length;
uint8_t type;
} QEMU_PACKED;
struct smbios_field {
struct smbios_header header;
uint8_t type;
uint16_t offset;
uint8_t data[];
} QEMU_PACKED;
struct smbios_table {
struct smbios_header header;
uint8_t data[];
} QEMU_PACKED;
#define SMBIOS_FIELD_ENTRY 0
#define SMBIOS_TABLE_ENTRY 1
static uint8_t *smbios_entries;
static size_t smbios_entries_len;
static bool smbios_legacy = true;
static bool smbios_uuid_encoded = true;
/* end: legacy structures & constants for <= 2.0 machines */
uint8_t *smbios_tables;
size_t smbios_tables_len;
unsigned smbios_table_max;
unsigned smbios_table_cnt;
static SmbiosEntryPointType smbios_ep_type = SMBIOS_ENTRY_POINT_21;
static SmbiosEntryPoint ep;
static int smbios_type4_count = 0;
static bool smbios_immutable;
static bool smbios_have_defaults;
static uint32_t smbios_cpuid_version, smbios_cpuid_features, smbios_smp_sockets;
static DECLARE_BITMAP(have_binfile_bitmap, SMBIOS_MAX_TYPE+1);
static DECLARE_BITMAP(have_fields_bitmap, SMBIOS_MAX_TYPE+1);
static struct {
const char *vendor, *version, *date;
bool have_major_minor, uefi;
uint8_t major, minor;
} type0;
static struct {
const char *manufacturer, *product, *version, *serial, *sku, *family;
/* uuid is in qemu_uuid */
} type1;
static struct {
const char *manufacturer, *product, *version, *serial, *asset, *location;
} type2;
static struct {
const char *manufacturer, *version, *serial, *asset, *sku;
} type3;
/*
* SVVP requires max_speed and current_speed to be set and not being
* 0 which counts as unknown (SMBIOS 3.1.0/Table 21). Set the
* default value to 2000MHz as we did before.
*/
#define DEFAULT_CPU_SPEED 2000
static struct {
const char *sock_pfx, *manufacturer, *version, *serial, *asset, *part;
uint64_t max_speed;
uint64_t current_speed;
} type4 = {
.max_speed = DEFAULT_CPU_SPEED,
.current_speed = DEFAULT_CPU_SPEED
};
smbios: support setting OEM strings table The cloud-init program currently allows fetching of its data by repurposing of the 'system' type 'serial' field. This is a clear abuse of the serial field that would clash with other valid usage a virt management app might have for that field. Fortunately the SMBIOS defines an "OEM Strings" table whose puporse is to allow exposing of arbitrary vendor specific strings to the operating system. This is perfect for use with cloud-init, or as a way to pass arguments to OS installers such as anaconda. This patch makes it easier to support this with QEMU. e.g. $QEMU -smbios type=11,value=Hello,value=World,value=Tricky,,value=test Which results in the guest seeing dmidecode data Handle 0x0E00, DMI type 11, 5 bytes OEM Strings String 1: Hello String 2: World String 3: Tricky,value=test It is suggested that any app wanting to make use of this OEM strings capability for accepting data from the host mgmt layer should use its name as a string prefix. e.g. to expose OEM strings targetting both cloud init and anaconda in parallel the mgmt app could set $QEMU -smbios type=11,value=cloud-init:ds=nocloud-net;s=http://10.10.0.1:8000/,\ value=anaconda:method=http://dl.fedoraproject.org/pub/fedora/linux/releases/25/x86_64/os which would appear as Handle 0x0E00, DMI type 11, 5 bytes OEM Strings String 1: cloud-init:ds=nocloud-net;s=http://10.10.0.1:8000/ String 2: anaconda:method=http://dl.fedoraproject.org/pub/fedora/linux/releases/25/x86_64/os Use of such string prefixes means the app won't have to care which string slot its data appears in. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-10-28 23:51:36 +03:00
static struct {
size_t nvalues;
char **values;
smbios: support setting OEM strings table The cloud-init program currently allows fetching of its data by repurposing of the 'system' type 'serial' field. This is a clear abuse of the serial field that would clash with other valid usage a virt management app might have for that field. Fortunately the SMBIOS defines an "OEM Strings" table whose puporse is to allow exposing of arbitrary vendor specific strings to the operating system. This is perfect for use with cloud-init, or as a way to pass arguments to OS installers such as anaconda. This patch makes it easier to support this with QEMU. e.g. $QEMU -smbios type=11,value=Hello,value=World,value=Tricky,,value=test Which results in the guest seeing dmidecode data Handle 0x0E00, DMI type 11, 5 bytes OEM Strings String 1: Hello String 2: World String 3: Tricky,value=test It is suggested that any app wanting to make use of this OEM strings capability for accepting data from the host mgmt layer should use its name as a string prefix. e.g. to expose OEM strings targetting both cloud init and anaconda in parallel the mgmt app could set $QEMU -smbios type=11,value=cloud-init:ds=nocloud-net;s=http://10.10.0.1:8000/,\ value=anaconda:method=http://dl.fedoraproject.org/pub/fedora/linux/releases/25/x86_64/os which would appear as Handle 0x0E00, DMI type 11, 5 bytes OEM Strings String 1: cloud-init:ds=nocloud-net;s=http://10.10.0.1:8000/ String 2: anaconda:method=http://dl.fedoraproject.org/pub/fedora/linux/releases/25/x86_64/os Use of such string prefixes means the app won't have to care which string slot its data appears in. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-10-28 23:51:36 +03:00
} type11;
static struct {
const char *loc_pfx, *bank, *manufacturer, *serial, *asset, *part;
uint16_t speed;
} type17;
hw/smbios: support for type 41 (onboard devices extended information) Type 41 defines the attributes of devices that are onboard. The original intent was to imply the BIOS had some level of control over the enablement of the associated devices. If network devices are present in this table, by default, udev will name the corresponding interfaces enoX, X being the instance number. Without such information, udev will fallback to using the PCI ID and this usually gives ens3 or ens4. This can be a bit annoying as the name of the network card may depend on the order of options and may change if a new PCI device is added earlier on the commande line. Being able to provide SMBIOS type 41 entry ensure the name of the interface won't change and helps the user guess the right name without booting a first time. This can be invoked with: $QEMU -netdev user,id=internet -device virtio-net-pci,mac=50:54:00:00:00:42,netdev=internet,id=internet-dev \ -smbios type=41,designation='Onboard LAN',instance=1,kind=ethernet,pcidev=internet-dev The PCI segment is assumed to be 0. This should hold true for most cases. $ dmidecode -t 41 # dmidecode 3.3 Getting SMBIOS data from sysfs. SMBIOS 2.8 present. Handle 0x2900, DMI type 41, 11 bytes Onboard Device Reference Designation: Onboard LAN Type: Ethernet Status: Enabled Type Instance: 1 Bus Address: 0000:00:09.0 $ ip -brief a lo UNKNOWN 127.0.0.1/8 ::1/128 eno1 UP 10.0.2.14/24 fec0::5254:ff:fe00:42/64 fe80::5254:ff:fe00:42/64 Signed-off-by: Vincent Bernat <vincent@bernat.ch> Message-Id: <20210401171138.62970-1-vincent@bernat.ch> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-04-01 20:11:38 +03:00
static QEnumLookup type41_kind_lookup = {
.array = (const char *const[]) {
"other",
"unknown",
"video",
"scsi",
"ethernet",
"tokenring",
"sound",
"pata",
"sata",
"sas",
},
.size = 10
};
struct type41_instance {
const char *designation, *pcidev;
uint8_t instance, kind;
QTAILQ_ENTRY(type41_instance) next;
};
static QTAILQ_HEAD(, type41_instance) type41 = QTAILQ_HEAD_INITIALIZER(type41);
static QemuOptsList qemu_smbios_opts = {
.name = "smbios",
.head = QTAILQ_HEAD_INITIALIZER(qemu_smbios_opts.head),
.desc = {
/*
* no elements => accept any params
* validation will happen later
*/
{ /* end of list */ }
}
};
static const QemuOptDesc qemu_smbios_file_opts[] = {
{
.name = "file",
.type = QEMU_OPT_STRING,
.help = "binary file containing an SMBIOS element",
},
{ /* end of list */ }
};
static const QemuOptDesc qemu_smbios_type0_opts[] = {
{
.name = "type",
.type = QEMU_OPT_NUMBER,
.help = "SMBIOS element type",
},{
.name = "vendor",
.type = QEMU_OPT_STRING,
.help = "vendor name",
},{
.name = "version",
.type = QEMU_OPT_STRING,
.help = "version number",
},{
.name = "date",
.type = QEMU_OPT_STRING,
.help = "release date",
},{
.name = "release",
.type = QEMU_OPT_STRING,
.help = "revision number",
},{
.name = "uefi",
.type = QEMU_OPT_BOOL,
.help = "uefi support",
},
{ /* end of list */ }
};
static const QemuOptDesc qemu_smbios_type1_opts[] = {
{
.name = "type",
.type = QEMU_OPT_NUMBER,
.help = "SMBIOS element type",
},{
.name = "manufacturer",
.type = QEMU_OPT_STRING,
.help = "manufacturer name",
},{
.name = "product",
.type = QEMU_OPT_STRING,
.help = "product name",
},{
.name = "version",
.type = QEMU_OPT_STRING,
.help = "version number",
},{
.name = "serial",
.type = QEMU_OPT_STRING,
.help = "serial number",
},{
.name = "uuid",
.type = QEMU_OPT_STRING,
.help = "UUID",
},{
.name = "sku",
.type = QEMU_OPT_STRING,
.help = "SKU number",
},{
.name = "family",
.type = QEMU_OPT_STRING,
.help = "family name",
},
{ /* end of list */ }
};
static const QemuOptDesc qemu_smbios_type2_opts[] = {
{
.name = "type",
.type = QEMU_OPT_NUMBER,
.help = "SMBIOS element type",
},{
.name = "manufacturer",
.type = QEMU_OPT_STRING,
.help = "manufacturer name",
},{
.name = "product",
.type = QEMU_OPT_STRING,
.help = "product name",
},{
.name = "version",
.type = QEMU_OPT_STRING,
.help = "version number",
},{
.name = "serial",
.type = QEMU_OPT_STRING,
.help = "serial number",
},{
.name = "asset",
.type = QEMU_OPT_STRING,
.help = "asset tag number",
},{
.name = "location",
.type = QEMU_OPT_STRING,
.help = "location in chassis",
},
{ /* end of list */ }
};
static const QemuOptDesc qemu_smbios_type3_opts[] = {
{
.name = "type",
.type = QEMU_OPT_NUMBER,
.help = "SMBIOS element type",
},{
.name = "manufacturer",
.type = QEMU_OPT_STRING,
.help = "manufacturer name",
},{
.name = "version",
.type = QEMU_OPT_STRING,
.help = "version number",
},{
.name = "serial",
.type = QEMU_OPT_STRING,
.help = "serial number",
},{
.name = "asset",
.type = QEMU_OPT_STRING,
.help = "asset tag number",
},{
.name = "sku",
.type = QEMU_OPT_STRING,
.help = "SKU number",
},
{ /* end of list */ }
};
static const QemuOptDesc qemu_smbios_type4_opts[] = {
{
.name = "type",
.type = QEMU_OPT_NUMBER,
.help = "SMBIOS element type",
},{
.name = "sock_pfx",
.type = QEMU_OPT_STRING,
.help = "socket designation string prefix",
},{
.name = "manufacturer",
.type = QEMU_OPT_STRING,
.help = "manufacturer name",
},{
.name = "version",
.type = QEMU_OPT_STRING,
.help = "version number",
},{
.name = "max-speed",
.type = QEMU_OPT_NUMBER,
.help = "max speed in MHz",
},{
.name = "current-speed",
.type = QEMU_OPT_NUMBER,
.help = "speed at system boot in MHz",
},{
.name = "serial",
.type = QEMU_OPT_STRING,
.help = "serial number",
},{
.name = "asset",
.type = QEMU_OPT_STRING,
.help = "asset tag number",
},{
.name = "part",
.type = QEMU_OPT_STRING,
.help = "part number",
},
{ /* end of list */ }
};
smbios: support setting OEM strings table The cloud-init program currently allows fetching of its data by repurposing of the 'system' type 'serial' field. This is a clear abuse of the serial field that would clash with other valid usage a virt management app might have for that field. Fortunately the SMBIOS defines an "OEM Strings" table whose puporse is to allow exposing of arbitrary vendor specific strings to the operating system. This is perfect for use with cloud-init, or as a way to pass arguments to OS installers such as anaconda. This patch makes it easier to support this with QEMU. e.g. $QEMU -smbios type=11,value=Hello,value=World,value=Tricky,,value=test Which results in the guest seeing dmidecode data Handle 0x0E00, DMI type 11, 5 bytes OEM Strings String 1: Hello String 2: World String 3: Tricky,value=test It is suggested that any app wanting to make use of this OEM strings capability for accepting data from the host mgmt layer should use its name as a string prefix. e.g. to expose OEM strings targetting both cloud init and anaconda in parallel the mgmt app could set $QEMU -smbios type=11,value=cloud-init:ds=nocloud-net;s=http://10.10.0.1:8000/,\ value=anaconda:method=http://dl.fedoraproject.org/pub/fedora/linux/releases/25/x86_64/os which would appear as Handle 0x0E00, DMI type 11, 5 bytes OEM Strings String 1: cloud-init:ds=nocloud-net;s=http://10.10.0.1:8000/ String 2: anaconda:method=http://dl.fedoraproject.org/pub/fedora/linux/releases/25/x86_64/os Use of such string prefixes means the app won't have to care which string slot its data appears in. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-10-28 23:51:36 +03:00
static const QemuOptDesc qemu_smbios_type11_opts[] = {
{
.name = "value",
.type = QEMU_OPT_STRING,
.help = "OEM string data",
},
{
.name = "path",
.type = QEMU_OPT_STRING,
.help = "OEM string data from file",
},
smbios: support setting OEM strings table The cloud-init program currently allows fetching of its data by repurposing of the 'system' type 'serial' field. This is a clear abuse of the serial field that would clash with other valid usage a virt management app might have for that field. Fortunately the SMBIOS defines an "OEM Strings" table whose puporse is to allow exposing of arbitrary vendor specific strings to the operating system. This is perfect for use with cloud-init, or as a way to pass arguments to OS installers such as anaconda. This patch makes it easier to support this with QEMU. e.g. $QEMU -smbios type=11,value=Hello,value=World,value=Tricky,,value=test Which results in the guest seeing dmidecode data Handle 0x0E00, DMI type 11, 5 bytes OEM Strings String 1: Hello String 2: World String 3: Tricky,value=test It is suggested that any app wanting to make use of this OEM strings capability for accepting data from the host mgmt layer should use its name as a string prefix. e.g. to expose OEM strings targetting both cloud init and anaconda in parallel the mgmt app could set $QEMU -smbios type=11,value=cloud-init:ds=nocloud-net;s=http://10.10.0.1:8000/,\ value=anaconda:method=http://dl.fedoraproject.org/pub/fedora/linux/releases/25/x86_64/os which would appear as Handle 0x0E00, DMI type 11, 5 bytes OEM Strings String 1: cloud-init:ds=nocloud-net;s=http://10.10.0.1:8000/ String 2: anaconda:method=http://dl.fedoraproject.org/pub/fedora/linux/releases/25/x86_64/os Use of such string prefixes means the app won't have to care which string slot its data appears in. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-10-28 23:51:36 +03:00
};
static const QemuOptDesc qemu_smbios_type17_opts[] = {
{
.name = "type",
.type = QEMU_OPT_NUMBER,
.help = "SMBIOS element type",
},{
.name = "loc_pfx",
.type = QEMU_OPT_STRING,
.help = "device locator string prefix",
},{
.name = "bank",
.type = QEMU_OPT_STRING,
.help = "bank locator string",
},{
.name = "manufacturer",
.type = QEMU_OPT_STRING,
.help = "manufacturer name",
},{
.name = "serial",
.type = QEMU_OPT_STRING,
.help = "serial number",
},{
.name = "asset",
.type = QEMU_OPT_STRING,
.help = "asset tag number",
},{
.name = "part",
.type = QEMU_OPT_STRING,
.help = "part number",
},{
.name = "speed",
.type = QEMU_OPT_NUMBER,
.help = "maximum capable speed",
},
{ /* end of list */ }
};
hw/smbios: support for type 41 (onboard devices extended information) Type 41 defines the attributes of devices that are onboard. The original intent was to imply the BIOS had some level of control over the enablement of the associated devices. If network devices are present in this table, by default, udev will name the corresponding interfaces enoX, X being the instance number. Without such information, udev will fallback to using the PCI ID and this usually gives ens3 or ens4. This can be a bit annoying as the name of the network card may depend on the order of options and may change if a new PCI device is added earlier on the commande line. Being able to provide SMBIOS type 41 entry ensure the name of the interface won't change and helps the user guess the right name without booting a first time. This can be invoked with: $QEMU -netdev user,id=internet -device virtio-net-pci,mac=50:54:00:00:00:42,netdev=internet,id=internet-dev \ -smbios type=41,designation='Onboard LAN',instance=1,kind=ethernet,pcidev=internet-dev The PCI segment is assumed to be 0. This should hold true for most cases. $ dmidecode -t 41 # dmidecode 3.3 Getting SMBIOS data from sysfs. SMBIOS 2.8 present. Handle 0x2900, DMI type 41, 11 bytes Onboard Device Reference Designation: Onboard LAN Type: Ethernet Status: Enabled Type Instance: 1 Bus Address: 0000:00:09.0 $ ip -brief a lo UNKNOWN 127.0.0.1/8 ::1/128 eno1 UP 10.0.2.14/24 fec0::5254:ff:fe00:42/64 fe80::5254:ff:fe00:42/64 Signed-off-by: Vincent Bernat <vincent@bernat.ch> Message-Id: <20210401171138.62970-1-vincent@bernat.ch> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-04-01 20:11:38 +03:00
static const QemuOptDesc qemu_smbios_type41_opts[] = {
{
.name = "type",
.type = QEMU_OPT_NUMBER,
.help = "SMBIOS element type",
},{
.name = "designation",
.type = QEMU_OPT_STRING,
.help = "reference designation string",
},{
.name = "kind",
.type = QEMU_OPT_STRING,
.help = "device type",
.def_value_str = "other",
},{
.name = "instance",
.type = QEMU_OPT_NUMBER,
.help = "device type instance",
},{
.name = "pcidev",
.type = QEMU_OPT_STRING,
.help = "PCI device",
},
{ /* end of list */ }
};
static void smbios_register_config(void)
{
qemu_add_opts(&qemu_smbios_opts);
}
opts_init(smbios_register_config);
/*
* The SMBIOS 2.1 "structure table length" field in the
* entry point uses a 16-bit integer, so we're limited
* in total table size
*/
#define SMBIOS_21_MAX_TABLES_LEN 0xffff
static void smbios_validate_table(MachineState *ms)
{
uint32_t expect_t4_count = smbios_legacy ?
ms->smp.cpus : smbios_smp_sockets;
if (smbios_type4_count && smbios_type4_count != expect_t4_count) {
error_report("Expected %d SMBIOS Type 4 tables, got %d instead",
expect_t4_count, smbios_type4_count);
exit(1);
}
if (smbios_ep_type == SMBIOS_ENTRY_POINT_21 &&
smbios_tables_len > SMBIOS_21_MAX_TABLES_LEN) {
error_report("SMBIOS 2.1 table length %zu exceeds %d",
smbios_tables_len, SMBIOS_21_MAX_TABLES_LEN);
exit(1);
}
}
/* legacy setup functions for <= 2.0 machines */
static void smbios_add_field(int type, int offset, const void *data, size_t len)
{
struct smbios_field *field;
if (!smbios_entries) {
smbios_entries_len = sizeof(uint16_t);
smbios_entries = g_malloc0(smbios_entries_len);
}
smbios_entries = g_realloc(smbios_entries, smbios_entries_len +
sizeof(*field) + len);
field = (struct smbios_field *)(smbios_entries + smbios_entries_len);
field->header.type = SMBIOS_FIELD_ENTRY;
field->header.length = cpu_to_le16(sizeof(*field) + len);
field->type = type;
field->offset = cpu_to_le16(offset);
memcpy(field->data, data, len);
smbios_entries_len += sizeof(*field) + len;
(*(uint16_t *)smbios_entries) =
cpu_to_le16(le16_to_cpu(*(uint16_t *)smbios_entries) + 1);
}
static void smbios_maybe_add_str(int type, int offset, const char *data)
{
if (data) {
smbios_add_field(type, offset, data, strlen(data) + 1);
}
}
static void smbios_build_type_0_fields(void)
{
smbios_maybe_add_str(0, offsetof(struct smbios_type_0, vendor_str),
type0.vendor);
smbios_maybe_add_str(0, offsetof(struct smbios_type_0, bios_version_str),
type0.version);
smbios_maybe_add_str(0, offsetof(struct smbios_type_0,
bios_release_date_str),
type0.date);
if (type0.have_major_minor) {
smbios_add_field(0, offsetof(struct smbios_type_0,
system_bios_major_release),
&type0.major, 1);
smbios_add_field(0, offsetof(struct smbios_type_0,
system_bios_minor_release),
&type0.minor, 1);
}
}
static void smbios_build_type_1_fields(void)
{
smbios_maybe_add_str(1, offsetof(struct smbios_type_1, manufacturer_str),
type1.manufacturer);
smbios_maybe_add_str(1, offsetof(struct smbios_type_1, product_name_str),
type1.product);
smbios_maybe_add_str(1, offsetof(struct smbios_type_1, version_str),
type1.version);
smbios_maybe_add_str(1, offsetof(struct smbios_type_1, serial_number_str),
type1.serial);
smbios_maybe_add_str(1, offsetof(struct smbios_type_1, sku_number_str),
type1.sku);
smbios_maybe_add_str(1, offsetof(struct smbios_type_1, family_str),
type1.family);
if (qemu_uuid_set) {
/* We don't encode the UUID in the "wire format" here because this
* function is for legacy mode and needs to keep the guest ABI, and
* because we don't know what's the SMBIOS version advertised by the
* BIOS.
*/
smbios_add_field(1, offsetof(struct smbios_type_1, uuid),
&qemu_uuid, 16);
}
}
uint8_t *smbios_get_table_legacy(MachineState *ms, size_t *length)
{
if (!smbios_legacy) {
*length = 0;
return NULL;
}
if (!smbios_immutable) {
smbios_build_type_0_fields();
smbios_build_type_1_fields();
smbios_validate_table(ms);
smbios_immutable = true;
}
*length = smbios_entries_len;
return smbios_entries;
}
/* end: legacy setup functions for <= 2.0 machines */
bool smbios_skip_table(uint8_t type, bool required_table)
{
if (test_bit(type, have_binfile_bitmap)) {
return true; /* user provided their own binary blob(s) */
}
if (test_bit(type, have_fields_bitmap)) {
return false; /* user provided fields via command line */
}
if (smbios_have_defaults && required_table) {
return false; /* we're building tables, and this one's required */
}
return true;
}
static void smbios_build_type_0_table(void)
{
SMBIOS_BUILD_TABLE_PRE(0, 0x000, false); /* optional, leave up to BIOS */
SMBIOS_TABLE_SET_STR(0, vendor_str, type0.vendor);
SMBIOS_TABLE_SET_STR(0, bios_version_str, type0.version);
t->bios_starting_address_segment = cpu_to_le16(0xE800); /* from SeaBIOS */
SMBIOS_TABLE_SET_STR(0, bios_release_date_str, type0.date);
t->bios_rom_size = 0; /* hardcoded in SeaBIOS with FIXME comment */
t->bios_characteristics = cpu_to_le64(0x08); /* Not supported */
t->bios_characteristics_extension_bytes[0] = 0;
t->bios_characteristics_extension_bytes[1] = 0x14; /* TCD/SVVP | VM */
if (type0.uefi) {
t->bios_characteristics_extension_bytes[1] |= 0x08; /* |= UEFI */
}
if (type0.have_major_minor) {
t->system_bios_major_release = type0.major;
t->system_bios_minor_release = type0.minor;
} else {
t->system_bios_major_release = 0;
t->system_bios_minor_release = 0;
}
/* hardcoded in SeaBIOS */
t->embedded_controller_major_release = 0xFF;
t->embedded_controller_minor_release = 0xFF;
SMBIOS_BUILD_TABLE_POST;
}
/* Encode UUID from the big endian encoding described on RFC4122 to the wire
* format specified by SMBIOS version 2.6.
*/
static void smbios_encode_uuid(struct smbios_uuid *uuid, QemuUUID *in)
{
memcpy(uuid, in, 16);
if (smbios_uuid_encoded) {
uuid->time_low = bswap32(uuid->time_low);
uuid->time_mid = bswap16(uuid->time_mid);
uuid->time_hi_and_version = bswap16(uuid->time_hi_and_version);
}
}
static void smbios_build_type_1_table(void)
{
SMBIOS_BUILD_TABLE_PRE(1, 0x100, true); /* required */
SMBIOS_TABLE_SET_STR(1, manufacturer_str, type1.manufacturer);
SMBIOS_TABLE_SET_STR(1, product_name_str, type1.product);
SMBIOS_TABLE_SET_STR(1, version_str, type1.version);
SMBIOS_TABLE_SET_STR(1, serial_number_str, type1.serial);
if (qemu_uuid_set) {
smbios_encode_uuid(&t->uuid, &qemu_uuid);
} else {
memset(&t->uuid, 0, 16);
}
t->wake_up_type = 0x06; /* power switch */
SMBIOS_TABLE_SET_STR(1, sku_number_str, type1.sku);
SMBIOS_TABLE_SET_STR(1, family_str, type1.family);
SMBIOS_BUILD_TABLE_POST;
}
static void smbios_build_type_2_table(void)
{
SMBIOS_BUILD_TABLE_PRE(2, 0x200, false); /* optional */
SMBIOS_TABLE_SET_STR(2, manufacturer_str, type2.manufacturer);
SMBIOS_TABLE_SET_STR(2, product_str, type2.product);
SMBIOS_TABLE_SET_STR(2, version_str, type2.version);
SMBIOS_TABLE_SET_STR(2, serial_number_str, type2.serial);
SMBIOS_TABLE_SET_STR(2, asset_tag_number_str, type2.asset);
t->feature_flags = 0x01; /* Motherboard */
SMBIOS_TABLE_SET_STR(2, location_str, type2.location);
t->chassis_handle = cpu_to_le16(0x300); /* Type 3 (System enclosure) */
t->board_type = 0x0A; /* Motherboard */
t->contained_element_count = 0;
SMBIOS_BUILD_TABLE_POST;
}
static void smbios_build_type_3_table(void)
{
SMBIOS_BUILD_TABLE_PRE(3, 0x300, true); /* required */
SMBIOS_TABLE_SET_STR(3, manufacturer_str, type3.manufacturer);
t->type = 0x01; /* Other */
SMBIOS_TABLE_SET_STR(3, version_str, type3.version);
SMBIOS_TABLE_SET_STR(3, serial_number_str, type3.serial);
SMBIOS_TABLE_SET_STR(3, asset_tag_number_str, type3.asset);
t->boot_up_state = 0x03; /* Safe */
t->power_supply_state = 0x03; /* Safe */
t->thermal_state = 0x03; /* Safe */
t->security_status = 0x02; /* Unknown */
t->oem_defined = cpu_to_le32(0);
t->height = 0;
t->number_of_power_cords = 0;
t->contained_element_count = 0;
t->contained_element_record_length = 0;
SMBIOS_TABLE_SET_STR(3, sku_number_str, type3.sku);
SMBIOS_BUILD_TABLE_POST;
}
static void smbios_build_type_4_table(MachineState *ms, unsigned instance)
{
char sock_str[128];
SMBIOS_BUILD_TABLE_PRE(4, 0x400 + instance, true); /* required */
snprintf(sock_str, sizeof(sock_str), "%s%2x", type4.sock_pfx, instance);
SMBIOS_TABLE_SET_STR(4, socket_designation_str, sock_str);
t->processor_type = 0x03; /* CPU */
t->processor_family = 0x01; /* Other */
SMBIOS_TABLE_SET_STR(4, processor_manufacturer_str, type4.manufacturer);
t->processor_id[0] = cpu_to_le32(smbios_cpuid_version);
t->processor_id[1] = cpu_to_le32(smbios_cpuid_features);
SMBIOS_TABLE_SET_STR(4, processor_version_str, type4.version);
t->voltage = 0;
t->external_clock = cpu_to_le16(0); /* Unknown */
t->max_speed = cpu_to_le16(type4.max_speed);
t->current_speed = cpu_to_le16(type4.current_speed);
t->status = 0x41; /* Socket populated, CPU enabled */
t->processor_upgrade = 0x01; /* Other */
t->l1_cache_handle = cpu_to_le16(0xFFFF); /* N/A */
t->l2_cache_handle = cpu_to_le16(0xFFFF); /* N/A */
t->l3_cache_handle = cpu_to_le16(0xFFFF); /* N/A */
SMBIOS_TABLE_SET_STR(4, serial_number_str, type4.serial);
SMBIOS_TABLE_SET_STR(4, asset_tag_number_str, type4.asset);
SMBIOS_TABLE_SET_STR(4, part_number_str, type4.part);
t->core_count = t->core_enabled = ms->smp.cores;
t->thread_count = ms->smp.threads;
t->processor_characteristics = cpu_to_le16(0x02); /* Unknown */
t->processor_family2 = cpu_to_le16(0x01); /* Other */
SMBIOS_BUILD_TABLE_POST;
smbios_type4_count++;
}
smbios: support setting OEM strings table The cloud-init program currently allows fetching of its data by repurposing of the 'system' type 'serial' field. This is a clear abuse of the serial field that would clash with other valid usage a virt management app might have for that field. Fortunately the SMBIOS defines an "OEM Strings" table whose puporse is to allow exposing of arbitrary vendor specific strings to the operating system. This is perfect for use with cloud-init, or as a way to pass arguments to OS installers such as anaconda. This patch makes it easier to support this with QEMU. e.g. $QEMU -smbios type=11,value=Hello,value=World,value=Tricky,,value=test Which results in the guest seeing dmidecode data Handle 0x0E00, DMI type 11, 5 bytes OEM Strings String 1: Hello String 2: World String 3: Tricky,value=test It is suggested that any app wanting to make use of this OEM strings capability for accepting data from the host mgmt layer should use its name as a string prefix. e.g. to expose OEM strings targetting both cloud init and anaconda in parallel the mgmt app could set $QEMU -smbios type=11,value=cloud-init:ds=nocloud-net;s=http://10.10.0.1:8000/,\ value=anaconda:method=http://dl.fedoraproject.org/pub/fedora/linux/releases/25/x86_64/os which would appear as Handle 0x0E00, DMI type 11, 5 bytes OEM Strings String 1: cloud-init:ds=nocloud-net;s=http://10.10.0.1:8000/ String 2: anaconda:method=http://dl.fedoraproject.org/pub/fedora/linux/releases/25/x86_64/os Use of such string prefixes means the app won't have to care which string slot its data appears in. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-10-28 23:51:36 +03:00
static void smbios_build_type_11_table(void)
{
char count_str[128];
size_t i;
if (type11.nvalues == 0) {
return;
}
SMBIOS_BUILD_TABLE_PRE(11, 0xe00, true); /* required */
snprintf(count_str, sizeof(count_str), "%zu", type11.nvalues);
t->count = type11.nvalues;
for (i = 0; i < type11.nvalues; i++) {
SMBIOS_TABLE_SET_STR_LIST(11, type11.values[i]);
g_free(type11.values[i]);
type11.values[i] = NULL;
smbios: support setting OEM strings table The cloud-init program currently allows fetching of its data by repurposing of the 'system' type 'serial' field. This is a clear abuse of the serial field that would clash with other valid usage a virt management app might have for that field. Fortunately the SMBIOS defines an "OEM Strings" table whose puporse is to allow exposing of arbitrary vendor specific strings to the operating system. This is perfect for use with cloud-init, or as a way to pass arguments to OS installers such as anaconda. This patch makes it easier to support this with QEMU. e.g. $QEMU -smbios type=11,value=Hello,value=World,value=Tricky,,value=test Which results in the guest seeing dmidecode data Handle 0x0E00, DMI type 11, 5 bytes OEM Strings String 1: Hello String 2: World String 3: Tricky,value=test It is suggested that any app wanting to make use of this OEM strings capability for accepting data from the host mgmt layer should use its name as a string prefix. e.g. to expose OEM strings targetting both cloud init and anaconda in parallel the mgmt app could set $QEMU -smbios type=11,value=cloud-init:ds=nocloud-net;s=http://10.10.0.1:8000/,\ value=anaconda:method=http://dl.fedoraproject.org/pub/fedora/linux/releases/25/x86_64/os which would appear as Handle 0x0E00, DMI type 11, 5 bytes OEM Strings String 1: cloud-init:ds=nocloud-net;s=http://10.10.0.1:8000/ String 2: anaconda:method=http://dl.fedoraproject.org/pub/fedora/linux/releases/25/x86_64/os Use of such string prefixes means the app won't have to care which string slot its data appears in. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-10-28 23:51:36 +03:00
}
SMBIOS_BUILD_TABLE_POST;
}
#define MAX_T16_STD_SZ 0x80000000 /* 2T in Kilobytes */
static void smbios_build_type_16_table(unsigned dimm_cnt)
{
uint64_t size_kb;
SMBIOS_BUILD_TABLE_PRE(16, 0x1000, true); /* required */
t->location = 0x01; /* Other */
t->use = 0x03; /* System memory */
t->error_correction = 0x06; /* Multi-bit ECC (for Microsoft, per SeaBIOS) */
size_kb = QEMU_ALIGN_UP(current_machine->ram_size, KiB) / KiB;
if (size_kb < MAX_T16_STD_SZ) {
t->maximum_capacity = cpu_to_le32(size_kb);
t->extended_maximum_capacity = cpu_to_le64(0);
} else {
t->maximum_capacity = cpu_to_le32(MAX_T16_STD_SZ);
t->extended_maximum_capacity = cpu_to_le64(current_machine->ram_size);
}
t->memory_error_information_handle = cpu_to_le16(0xFFFE); /* Not provided */
t->number_of_memory_devices = cpu_to_le16(dimm_cnt);
SMBIOS_BUILD_TABLE_POST;
}
#define MAX_T17_STD_SZ 0x7FFF /* (32G - 1M), in Megabytes */
#define MAX_T17_EXT_SZ 0x80000000 /* 2P, in Megabytes */
static void smbios_build_type_17_table(unsigned instance, uint64_t size)
{
char loc_str[128];
uint64_t size_mb;
SMBIOS_BUILD_TABLE_PRE(17, 0x1100 + instance, true); /* required */
t->physical_memory_array_handle = cpu_to_le16(0x1000); /* Type 16 above */
t->memory_error_information_handle = cpu_to_le16(0xFFFE); /* Not provided */
t->total_width = cpu_to_le16(0xFFFF); /* Unknown */
t->data_width = cpu_to_le16(0xFFFF); /* Unknown */
size_mb = QEMU_ALIGN_UP(size, MiB) / MiB;
if (size_mb < MAX_T17_STD_SZ) {
t->size = cpu_to_le16(size_mb);
t->extended_size = cpu_to_le32(0);
} else {
assert(size_mb < MAX_T17_EXT_SZ);
t->size = cpu_to_le16(MAX_T17_STD_SZ);
t->extended_size = cpu_to_le32(size_mb);
}
t->form_factor = 0x09; /* DIMM */
t->device_set = 0; /* Not in a set */
snprintf(loc_str, sizeof(loc_str), "%s %d", type17.loc_pfx, instance);
SMBIOS_TABLE_SET_STR(17, device_locator_str, loc_str);
SMBIOS_TABLE_SET_STR(17, bank_locator_str, type17.bank);
t->memory_type = 0x07; /* RAM */
t->type_detail = cpu_to_le16(0x02); /* Other */
t->speed = cpu_to_le16(type17.speed);
SMBIOS_TABLE_SET_STR(17, manufacturer_str, type17.manufacturer);
SMBIOS_TABLE_SET_STR(17, serial_number_str, type17.serial);
SMBIOS_TABLE_SET_STR(17, asset_tag_number_str, type17.asset);
SMBIOS_TABLE_SET_STR(17, part_number_str, type17.part);
t->attributes = 0; /* Unknown */
t->configured_clock_speed = t->speed; /* reuse value for max speed */
t->minimum_voltage = cpu_to_le16(0); /* Unknown */
t->maximum_voltage = cpu_to_le16(0); /* Unknown */
t->configured_voltage = cpu_to_le16(0); /* Unknown */
SMBIOS_BUILD_TABLE_POST;
}
static void smbios_build_type_19_table(unsigned instance,
uint64_t start, uint64_t size)
{
uint64_t end, start_kb, end_kb;
SMBIOS_BUILD_TABLE_PRE(19, 0x1300 + instance, true); /* required */
end = start + size - 1;
assert(end > start);
start_kb = start / KiB;
end_kb = end / KiB;
if (start_kb < UINT32_MAX && end_kb < UINT32_MAX) {
t->starting_address = cpu_to_le32(start_kb);
t->ending_address = cpu_to_le32(end_kb);
t->extended_starting_address =
t->extended_ending_address = cpu_to_le64(0);
} else {
t->starting_address = t->ending_address = cpu_to_le32(UINT32_MAX);
t->extended_starting_address = cpu_to_le64(start);
t->extended_ending_address = cpu_to_le64(end);
}
t->memory_array_handle = cpu_to_le16(0x1000); /* Type 16 above */
t->partition_width = 1; /* One device per row */
SMBIOS_BUILD_TABLE_POST;
}
static void smbios_build_type_32_table(void)
{
SMBIOS_BUILD_TABLE_PRE(32, 0x2000, true); /* required */
memset(t->reserved, 0, 6);
t->boot_status = 0; /* No errors detected */
SMBIOS_BUILD_TABLE_POST;
}
hw/smbios: support for type 41 (onboard devices extended information) Type 41 defines the attributes of devices that are onboard. The original intent was to imply the BIOS had some level of control over the enablement of the associated devices. If network devices are present in this table, by default, udev will name the corresponding interfaces enoX, X being the instance number. Without such information, udev will fallback to using the PCI ID and this usually gives ens3 or ens4. This can be a bit annoying as the name of the network card may depend on the order of options and may change if a new PCI device is added earlier on the commande line. Being able to provide SMBIOS type 41 entry ensure the name of the interface won't change and helps the user guess the right name without booting a first time. This can be invoked with: $QEMU -netdev user,id=internet -device virtio-net-pci,mac=50:54:00:00:00:42,netdev=internet,id=internet-dev \ -smbios type=41,designation='Onboard LAN',instance=1,kind=ethernet,pcidev=internet-dev The PCI segment is assumed to be 0. This should hold true for most cases. $ dmidecode -t 41 # dmidecode 3.3 Getting SMBIOS data from sysfs. SMBIOS 2.8 present. Handle 0x2900, DMI type 41, 11 bytes Onboard Device Reference Designation: Onboard LAN Type: Ethernet Status: Enabled Type Instance: 1 Bus Address: 0000:00:09.0 $ ip -brief a lo UNKNOWN 127.0.0.1/8 ::1/128 eno1 UP 10.0.2.14/24 fec0::5254:ff:fe00:42/64 fe80::5254:ff:fe00:42/64 Signed-off-by: Vincent Bernat <vincent@bernat.ch> Message-Id: <20210401171138.62970-1-vincent@bernat.ch> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-04-01 20:11:38 +03:00
static void smbios_build_type_41_table(Error **errp)
{
unsigned instance = 0;
struct type41_instance *t41;
QTAILQ_FOREACH(t41, &type41, next) {
SMBIOS_BUILD_TABLE_PRE(41, 0x2900 + instance, true);
SMBIOS_TABLE_SET_STR(41, reference_designation_str, t41->designation);
t->device_type = t41->kind;
t->device_type_instance = t41->instance;
t->segment_group_number = cpu_to_le16(0);
t->bus_number = 0;
t->device_number = 0;
if (t41->pcidev) {
PCIDevice *pdev = NULL;
int rc = pci_qdev_find_device(t41->pcidev, &pdev);
if (rc != 0) {
error_setg(errp,
"No PCI device %s for SMBIOS type 41 entry %s",
t41->pcidev, t41->designation);
return;
}
/*
* We only handle the case were the device is attached to
* the PCI root bus. The general case is more complex as
* bridges are enumerated later and the table would need
* to be updated at this moment.
*/
if (!pci_bus_is_root(pci_get_bus(pdev))) {
error_setg(errp,
"Cannot create type 41 entry for PCI device %s: "
"not attached to the root bus",
t41->pcidev);
return;
}
t->segment_group_number = cpu_to_le16(0);
t->bus_number = pci_dev_bus_num(pdev);
t->device_number = pdev->devfn;
}
SMBIOS_BUILD_TABLE_POST;
instance++;
}
}
static void smbios_build_type_127_table(void)
{
SMBIOS_BUILD_TABLE_PRE(127, 0x7F00, true); /* required */
SMBIOS_BUILD_TABLE_POST;
}
void smbios_set_cpuid(uint32_t version, uint32_t features)
{
smbios_cpuid_version = version;
smbios_cpuid_features = features;
}
#define SMBIOS_SET_DEFAULT(field, value) \
if (!field) { \
field = value; \
}
void smbios_set_defaults(const char *manufacturer, const char *product,
const char *version, bool legacy_mode,
bool uuid_encoded, SmbiosEntryPointType ep_type)
{
smbios_have_defaults = true;
smbios_legacy = legacy_mode;
smbios_uuid_encoded = uuid_encoded;
smbios_ep_type = ep_type;
/* drop unwanted version of command-line file blob(s) */
if (smbios_legacy) {
g_free(smbios_tables);
/* in legacy mode, also complain if fields were given for types > 1 */
if (find_next_bit(have_fields_bitmap,
SMBIOS_MAX_TYPE+1, 2) < SMBIOS_MAX_TYPE+1) {
error_report("can't process fields for smbios "
"types > 1 on machine versions < 2.1!");
exit(1);
}
} else {
g_free(smbios_entries);
}
SMBIOS_SET_DEFAULT(type1.manufacturer, manufacturer);
SMBIOS_SET_DEFAULT(type1.product, product);
SMBIOS_SET_DEFAULT(type1.version, version);
SMBIOS_SET_DEFAULT(type2.manufacturer, manufacturer);
SMBIOS_SET_DEFAULT(type2.product, product);
SMBIOS_SET_DEFAULT(type2.version, version);
SMBIOS_SET_DEFAULT(type3.manufacturer, manufacturer);
SMBIOS_SET_DEFAULT(type3.version, version);
SMBIOS_SET_DEFAULT(type4.sock_pfx, "CPU");
SMBIOS_SET_DEFAULT(type4.manufacturer, manufacturer);
SMBIOS_SET_DEFAULT(type4.version, version);
SMBIOS_SET_DEFAULT(type17.loc_pfx, "DIMM");
SMBIOS_SET_DEFAULT(type17.manufacturer, manufacturer);
}
static void smbios_entry_point_setup(void)
{
switch (smbios_ep_type) {
case SMBIOS_ENTRY_POINT_21:
memcpy(ep.ep21.anchor_string, "_SM_", 4);
memcpy(ep.ep21.intermediate_anchor_string, "_DMI_", 5);
ep.ep21.length = sizeof(struct smbios_21_entry_point);
ep.ep21.entry_point_revision = 0; /* formatted_area reserved */
memset(ep.ep21.formatted_area, 0, 5);
/* compliant with smbios spec v2.8 */
ep.ep21.smbios_major_version = 2;
ep.ep21.smbios_minor_version = 8;
ep.ep21.smbios_bcd_revision = 0x28;
/* set during table construction, but BIOS may override: */
ep.ep21.structure_table_length = cpu_to_le16(smbios_tables_len);
ep.ep21.max_structure_size = cpu_to_le16(smbios_table_max);
ep.ep21.number_of_structures = cpu_to_le16(smbios_table_cnt);
/* BIOS must recalculate */
ep.ep21.checksum = 0;
ep.ep21.intermediate_checksum = 0;
ep.ep21.structure_table_address = cpu_to_le32(0);
break;
case SMBIOS_ENTRY_POINT_30:
memcpy(ep.ep30.anchor_string, "_SM3_", 5);
ep.ep30.length = sizeof(struct smbios_30_entry_point);
ep.ep30.entry_point_revision = 1;
ep.ep30.reserved = 0;
/* compliant with smbios spec 3.0 */
ep.ep30.smbios_major_version = 3;
ep.ep30.smbios_minor_version = 0;
ep.ep30.smbios_doc_rev = 0;
/* set during table construct, but BIOS might override */
ep.ep30.structure_table_max_size = cpu_to_le32(smbios_tables_len);
/* BIOS must recalculate */
ep.ep30.checksum = 0;
ep.ep30.structure_table_address = cpu_to_le64(0);
break;
default:
abort();
break;
}
}
void smbios_get_tables(MachineState *ms,
const struct smbios_phys_mem_area *mem_array,
const unsigned int mem_array_size,
uint8_t **tables, size_t *tables_len,
hw/smbios: support for type 41 (onboard devices extended information) Type 41 defines the attributes of devices that are onboard. The original intent was to imply the BIOS had some level of control over the enablement of the associated devices. If network devices are present in this table, by default, udev will name the corresponding interfaces enoX, X being the instance number. Without such information, udev will fallback to using the PCI ID and this usually gives ens3 or ens4. This can be a bit annoying as the name of the network card may depend on the order of options and may change if a new PCI device is added earlier on the commande line. Being able to provide SMBIOS type 41 entry ensure the name of the interface won't change and helps the user guess the right name without booting a first time. This can be invoked with: $QEMU -netdev user,id=internet -device virtio-net-pci,mac=50:54:00:00:00:42,netdev=internet,id=internet-dev \ -smbios type=41,designation='Onboard LAN',instance=1,kind=ethernet,pcidev=internet-dev The PCI segment is assumed to be 0. This should hold true for most cases. $ dmidecode -t 41 # dmidecode 3.3 Getting SMBIOS data from sysfs. SMBIOS 2.8 present. Handle 0x2900, DMI type 41, 11 bytes Onboard Device Reference Designation: Onboard LAN Type: Ethernet Status: Enabled Type Instance: 1 Bus Address: 0000:00:09.0 $ ip -brief a lo UNKNOWN 127.0.0.1/8 ::1/128 eno1 UP 10.0.2.14/24 fec0::5254:ff:fe00:42/64 fe80::5254:ff:fe00:42/64 Signed-off-by: Vincent Bernat <vincent@bernat.ch> Message-Id: <20210401171138.62970-1-vincent@bernat.ch> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-04-01 20:11:38 +03:00
uint8_t **anchor, size_t *anchor_len,
Error **errp)
{
unsigned i, dimm_cnt;
if (smbios_legacy) {
*tables = *anchor = NULL;
*tables_len = *anchor_len = 0;
return;
}
if (!smbios_immutable) {
smbios_build_type_0_table();
smbios_build_type_1_table();
smbios_build_type_2_table();
smbios_build_type_3_table();
smbios_smp_sockets = DIV_ROUND_UP(ms->smp.cpus,
ms->smp.cores * ms->smp.threads);
assert(smbios_smp_sockets >= 1);
for (i = 0; i < smbios_smp_sockets; i++) {
smbios_build_type_4_table(ms, i);
}
smbios: support setting OEM strings table The cloud-init program currently allows fetching of its data by repurposing of the 'system' type 'serial' field. This is a clear abuse of the serial field that would clash with other valid usage a virt management app might have for that field. Fortunately the SMBIOS defines an "OEM Strings" table whose puporse is to allow exposing of arbitrary vendor specific strings to the operating system. This is perfect for use with cloud-init, or as a way to pass arguments to OS installers such as anaconda. This patch makes it easier to support this with QEMU. e.g. $QEMU -smbios type=11,value=Hello,value=World,value=Tricky,,value=test Which results in the guest seeing dmidecode data Handle 0x0E00, DMI type 11, 5 bytes OEM Strings String 1: Hello String 2: World String 3: Tricky,value=test It is suggested that any app wanting to make use of this OEM strings capability for accepting data from the host mgmt layer should use its name as a string prefix. e.g. to expose OEM strings targetting both cloud init and anaconda in parallel the mgmt app could set $QEMU -smbios type=11,value=cloud-init:ds=nocloud-net;s=http://10.10.0.1:8000/,\ value=anaconda:method=http://dl.fedoraproject.org/pub/fedora/linux/releases/25/x86_64/os which would appear as Handle 0x0E00, DMI type 11, 5 bytes OEM Strings String 1: cloud-init:ds=nocloud-net;s=http://10.10.0.1:8000/ String 2: anaconda:method=http://dl.fedoraproject.org/pub/fedora/linux/releases/25/x86_64/os Use of such string prefixes means the app won't have to care which string slot its data appears in. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-10-28 23:51:36 +03:00
smbios_build_type_11_table();
#define MAX_DIMM_SZ (16 * GiB)
#define GET_DIMM_SZ ((i < dimm_cnt - 1) ? MAX_DIMM_SZ \
: ((current_machine->ram_size - 1) % MAX_DIMM_SZ) + 1)
dimm_cnt = QEMU_ALIGN_UP(current_machine->ram_size, MAX_DIMM_SZ) / MAX_DIMM_SZ;
smbios_build_type_16_table(dimm_cnt);
for (i = 0; i < dimm_cnt; i++) {
smbios_build_type_17_table(i, GET_DIMM_SZ);
}
for (i = 0; i < mem_array_size; i++) {
smbios_build_type_19_table(i, mem_array[i].address,
mem_array[i].length);
}
smbios_build_type_32_table();
smbios_build_type_38_table();
hw/smbios: support for type 41 (onboard devices extended information) Type 41 defines the attributes of devices that are onboard. The original intent was to imply the BIOS had some level of control over the enablement of the associated devices. If network devices are present in this table, by default, udev will name the corresponding interfaces enoX, X being the instance number. Without such information, udev will fallback to using the PCI ID and this usually gives ens3 or ens4. This can be a bit annoying as the name of the network card may depend on the order of options and may change if a new PCI device is added earlier on the commande line. Being able to provide SMBIOS type 41 entry ensure the name of the interface won't change and helps the user guess the right name without booting a first time. This can be invoked with: $QEMU -netdev user,id=internet -device virtio-net-pci,mac=50:54:00:00:00:42,netdev=internet,id=internet-dev \ -smbios type=41,designation='Onboard LAN',instance=1,kind=ethernet,pcidev=internet-dev The PCI segment is assumed to be 0. This should hold true for most cases. $ dmidecode -t 41 # dmidecode 3.3 Getting SMBIOS data from sysfs. SMBIOS 2.8 present. Handle 0x2900, DMI type 41, 11 bytes Onboard Device Reference Designation: Onboard LAN Type: Ethernet Status: Enabled Type Instance: 1 Bus Address: 0000:00:09.0 $ ip -brief a lo UNKNOWN 127.0.0.1/8 ::1/128 eno1 UP 10.0.2.14/24 fec0::5254:ff:fe00:42/64 fe80::5254:ff:fe00:42/64 Signed-off-by: Vincent Bernat <vincent@bernat.ch> Message-Id: <20210401171138.62970-1-vincent@bernat.ch> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-04-01 20:11:38 +03:00
smbios_build_type_41_table(errp);
smbios_build_type_127_table();
smbios_validate_table(ms);
smbios_entry_point_setup();
smbios_immutable = true;
}
/* return tables blob and entry point (anchor), and their sizes */
*tables = smbios_tables;
*tables_len = smbios_tables_len;
*anchor = (uint8_t *)&ep;
/* calculate length based on anchor string */
if (!strncmp((char *)&ep, "_SM_", 4)) {
*anchor_len = sizeof(struct smbios_21_entry_point);
} else if (!strncmp((char *)&ep, "_SM3_", 5)) {
*anchor_len = sizeof(struct smbios_30_entry_point);
} else {
abort();
}
}
static void save_opt(const char **dest, QemuOpts *opts, const char *name)
{
const char *val = qemu_opt_get(opts, name);
if (val) {
*dest = val;
}
}
smbios: support setting OEM strings table The cloud-init program currently allows fetching of its data by repurposing of the 'system' type 'serial' field. This is a clear abuse of the serial field that would clash with other valid usage a virt management app might have for that field. Fortunately the SMBIOS defines an "OEM Strings" table whose puporse is to allow exposing of arbitrary vendor specific strings to the operating system. This is perfect for use with cloud-init, or as a way to pass arguments to OS installers such as anaconda. This patch makes it easier to support this with QEMU. e.g. $QEMU -smbios type=11,value=Hello,value=World,value=Tricky,,value=test Which results in the guest seeing dmidecode data Handle 0x0E00, DMI type 11, 5 bytes OEM Strings String 1: Hello String 2: World String 3: Tricky,value=test It is suggested that any app wanting to make use of this OEM strings capability for accepting data from the host mgmt layer should use its name as a string prefix. e.g. to expose OEM strings targetting both cloud init and anaconda in parallel the mgmt app could set $QEMU -smbios type=11,value=cloud-init:ds=nocloud-net;s=http://10.10.0.1:8000/,\ value=anaconda:method=http://dl.fedoraproject.org/pub/fedora/linux/releases/25/x86_64/os which would appear as Handle 0x0E00, DMI type 11, 5 bytes OEM Strings String 1: cloud-init:ds=nocloud-net;s=http://10.10.0.1:8000/ String 2: anaconda:method=http://dl.fedoraproject.org/pub/fedora/linux/releases/25/x86_64/os Use of such string prefixes means the app won't have to care which string slot its data appears in. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-10-28 23:51:36 +03:00
struct opt_list {
size_t *ndest;
char ***dest;
smbios: support setting OEM strings table The cloud-init program currently allows fetching of its data by repurposing of the 'system' type 'serial' field. This is a clear abuse of the serial field that would clash with other valid usage a virt management app might have for that field. Fortunately the SMBIOS defines an "OEM Strings" table whose puporse is to allow exposing of arbitrary vendor specific strings to the operating system. This is perfect for use with cloud-init, or as a way to pass arguments to OS installers such as anaconda. This patch makes it easier to support this with QEMU. e.g. $QEMU -smbios type=11,value=Hello,value=World,value=Tricky,,value=test Which results in the guest seeing dmidecode data Handle 0x0E00, DMI type 11, 5 bytes OEM Strings String 1: Hello String 2: World String 3: Tricky,value=test It is suggested that any app wanting to make use of this OEM strings capability for accepting data from the host mgmt layer should use its name as a string prefix. e.g. to expose OEM strings targetting both cloud init and anaconda in parallel the mgmt app could set $QEMU -smbios type=11,value=cloud-init:ds=nocloud-net;s=http://10.10.0.1:8000/,\ value=anaconda:method=http://dl.fedoraproject.org/pub/fedora/linux/releases/25/x86_64/os which would appear as Handle 0x0E00, DMI type 11, 5 bytes OEM Strings String 1: cloud-init:ds=nocloud-net;s=http://10.10.0.1:8000/ String 2: anaconda:method=http://dl.fedoraproject.org/pub/fedora/linux/releases/25/x86_64/os Use of such string prefixes means the app won't have to care which string slot its data appears in. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-10-28 23:51:36 +03:00
};
static int save_opt_one(void *opaque,
const char *name, const char *value,
Error **errp)
{
struct opt_list *opt = opaque;
if (g_str_equal(name, "path")) {
g_autoptr(GByteArray) data = g_byte_array_new();
g_autofree char *buf = g_new(char, 4096);
ssize_t ret;
int fd = qemu_open(value, O_RDONLY, errp);
if (fd < 0) {
return -1;
}
while (1) {
ret = read(fd, buf, 4096);
if (ret == 0) {
break;
}
if (ret < 0) {
error_setg(errp, "Unable to read from %s: %s",
value, strerror(errno));
qemu_close(fd);
return -1;
}
if (memchr(buf, '\0', ret)) {
error_setg(errp, "NUL in OEM strings value in %s", value);
qemu_close(fd);
return -1;
}
g_byte_array_append(data, (guint8 *)buf, ret);
}
qemu_close(fd);
*opt->dest = g_renew(char *, *opt->dest, (*opt->ndest) + 1);
(*opt->dest)[*opt->ndest] = (char *)g_byte_array_free(data, FALSE);
(*opt->ndest)++;
data = NULL;
} else if (g_str_equal(name, "value")) {
*opt->dest = g_renew(char *, *opt->dest, (*opt->ndest) + 1);
(*opt->dest)[*opt->ndest] = g_strdup(value);
(*opt->ndest)++;
} else if (!g_str_equal(name, "type")) {
error_setg(errp, "Unexpected option %s", name);
return -1;
smbios: support setting OEM strings table The cloud-init program currently allows fetching of its data by repurposing of the 'system' type 'serial' field. This is a clear abuse of the serial field that would clash with other valid usage a virt management app might have for that field. Fortunately the SMBIOS defines an "OEM Strings" table whose puporse is to allow exposing of arbitrary vendor specific strings to the operating system. This is perfect for use with cloud-init, or as a way to pass arguments to OS installers such as anaconda. This patch makes it easier to support this with QEMU. e.g. $QEMU -smbios type=11,value=Hello,value=World,value=Tricky,,value=test Which results in the guest seeing dmidecode data Handle 0x0E00, DMI type 11, 5 bytes OEM Strings String 1: Hello String 2: World String 3: Tricky,value=test It is suggested that any app wanting to make use of this OEM strings capability for accepting data from the host mgmt layer should use its name as a string prefix. e.g. to expose OEM strings targetting both cloud init and anaconda in parallel the mgmt app could set $QEMU -smbios type=11,value=cloud-init:ds=nocloud-net;s=http://10.10.0.1:8000/,\ value=anaconda:method=http://dl.fedoraproject.org/pub/fedora/linux/releases/25/x86_64/os which would appear as Handle 0x0E00, DMI type 11, 5 bytes OEM Strings String 1: cloud-init:ds=nocloud-net;s=http://10.10.0.1:8000/ String 2: anaconda:method=http://dl.fedoraproject.org/pub/fedora/linux/releases/25/x86_64/os Use of such string prefixes means the app won't have to care which string slot its data appears in. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-10-28 23:51:36 +03:00
}
return 0;
}
static bool save_opt_list(size_t *ndest, char ***dest, QemuOpts *opts,
Error **errp)
smbios: support setting OEM strings table The cloud-init program currently allows fetching of its data by repurposing of the 'system' type 'serial' field. This is a clear abuse of the serial field that would clash with other valid usage a virt management app might have for that field. Fortunately the SMBIOS defines an "OEM Strings" table whose puporse is to allow exposing of arbitrary vendor specific strings to the operating system. This is perfect for use with cloud-init, or as a way to pass arguments to OS installers such as anaconda. This patch makes it easier to support this with QEMU. e.g. $QEMU -smbios type=11,value=Hello,value=World,value=Tricky,,value=test Which results in the guest seeing dmidecode data Handle 0x0E00, DMI type 11, 5 bytes OEM Strings String 1: Hello String 2: World String 3: Tricky,value=test It is suggested that any app wanting to make use of this OEM strings capability for accepting data from the host mgmt layer should use its name as a string prefix. e.g. to expose OEM strings targetting both cloud init and anaconda in parallel the mgmt app could set $QEMU -smbios type=11,value=cloud-init:ds=nocloud-net;s=http://10.10.0.1:8000/,\ value=anaconda:method=http://dl.fedoraproject.org/pub/fedora/linux/releases/25/x86_64/os which would appear as Handle 0x0E00, DMI type 11, 5 bytes OEM Strings String 1: cloud-init:ds=nocloud-net;s=http://10.10.0.1:8000/ String 2: anaconda:method=http://dl.fedoraproject.org/pub/fedora/linux/releases/25/x86_64/os Use of such string prefixes means the app won't have to care which string slot its data appears in. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-10-28 23:51:36 +03:00
{
struct opt_list opt = {
ndest, dest,
smbios: support setting OEM strings table The cloud-init program currently allows fetching of its data by repurposing of the 'system' type 'serial' field. This is a clear abuse of the serial field that would clash with other valid usage a virt management app might have for that field. Fortunately the SMBIOS defines an "OEM Strings" table whose puporse is to allow exposing of arbitrary vendor specific strings to the operating system. This is perfect for use with cloud-init, or as a way to pass arguments to OS installers such as anaconda. This patch makes it easier to support this with QEMU. e.g. $QEMU -smbios type=11,value=Hello,value=World,value=Tricky,,value=test Which results in the guest seeing dmidecode data Handle 0x0E00, DMI type 11, 5 bytes OEM Strings String 1: Hello String 2: World String 3: Tricky,value=test It is suggested that any app wanting to make use of this OEM strings capability for accepting data from the host mgmt layer should use its name as a string prefix. e.g. to expose OEM strings targetting both cloud init and anaconda in parallel the mgmt app could set $QEMU -smbios type=11,value=cloud-init:ds=nocloud-net;s=http://10.10.0.1:8000/,\ value=anaconda:method=http://dl.fedoraproject.org/pub/fedora/linux/releases/25/x86_64/os which would appear as Handle 0x0E00, DMI type 11, 5 bytes OEM Strings String 1: cloud-init:ds=nocloud-net;s=http://10.10.0.1:8000/ String 2: anaconda:method=http://dl.fedoraproject.org/pub/fedora/linux/releases/25/x86_64/os Use of such string prefixes means the app won't have to care which string slot its data appears in. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-10-28 23:51:36 +03:00
};
if (!qemu_opt_foreach(opts, save_opt_one, &opt, errp)) {
return false;
}
return true;
smbios: support setting OEM strings table The cloud-init program currently allows fetching of its data by repurposing of the 'system' type 'serial' field. This is a clear abuse of the serial field that would clash with other valid usage a virt management app might have for that field. Fortunately the SMBIOS defines an "OEM Strings" table whose puporse is to allow exposing of arbitrary vendor specific strings to the operating system. This is perfect for use with cloud-init, or as a way to pass arguments to OS installers such as anaconda. This patch makes it easier to support this with QEMU. e.g. $QEMU -smbios type=11,value=Hello,value=World,value=Tricky,,value=test Which results in the guest seeing dmidecode data Handle 0x0E00, DMI type 11, 5 bytes OEM Strings String 1: Hello String 2: World String 3: Tricky,value=test It is suggested that any app wanting to make use of this OEM strings capability for accepting data from the host mgmt layer should use its name as a string prefix. e.g. to expose OEM strings targetting both cloud init and anaconda in parallel the mgmt app could set $QEMU -smbios type=11,value=cloud-init:ds=nocloud-net;s=http://10.10.0.1:8000/,\ value=anaconda:method=http://dl.fedoraproject.org/pub/fedora/linux/releases/25/x86_64/os which would appear as Handle 0x0E00, DMI type 11, 5 bytes OEM Strings String 1: cloud-init:ds=nocloud-net;s=http://10.10.0.1:8000/ String 2: anaconda:method=http://dl.fedoraproject.org/pub/fedora/linux/releases/25/x86_64/os Use of such string prefixes means the app won't have to care which string slot its data appears in. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-10-28 23:51:36 +03:00
}
void smbios_entry_add(QemuOpts *opts, Error **errp)
{
const char *val;
assert(!smbios_immutable);
val = qemu_opt_get(opts, "file");
if (val) {
struct smbios_structure_header *header;
int size;
struct smbios_table *table; /* legacy mode only */
error: Eliminate error_propagate() with Coccinelle, part 1 When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-07 19:06:02 +03:00
if (!qemu_opts_validate(opts, qemu_smbios_file_opts, errp)) {
return;
}
size = get_image_size(val);
if (size == -1 || size < sizeof(struct smbios_structure_header)) {
error_setg(errp, "Cannot read SMBIOS file %s", val);
return;
}
/*
* NOTE: standard double '\0' terminator expected, per smbios spec.
* (except in legacy mode, where the second '\0' is implicit and
* will be inserted by the BIOS).
*/
smbios_tables = g_realloc(smbios_tables, smbios_tables_len + size);
header = (struct smbios_structure_header *)(smbios_tables +
smbios_tables_len);
if (load_image_size(val, (uint8_t *)header, size) != size) {
error_setg(errp, "Failed to load SMBIOS file %s", val);
return;
}
if (test_bit(header->type, have_fields_bitmap)) {
error_setg(errp,
"can't load type %d struct, fields already specified!",
header->type);
return;
}
set_bit(header->type, have_binfile_bitmap);
if (header->type == 4) {
smbios_type4_count++;
}
smbios_tables_len += size;
if (size > smbios_table_max) {
smbios_table_max = size;
}
smbios_table_cnt++;
/* add a copy of the newly loaded blob to legacy smbios_entries */
/* NOTE: This code runs before smbios_set_defaults(), so we don't
* yet know which mode (legacy vs. aggregate-table) will be
* required. We therefore add the binary blob to both legacy
* (smbios_entries) and aggregate (smbios_tables) tables, and
* delete the one we don't need from smbios_set_defaults(),
* once we know which machine version has been requested.
*/
if (!smbios_entries) {
smbios_entries_len = sizeof(uint16_t);
smbios_entries = g_malloc0(smbios_entries_len);
}
smbios_entries = g_realloc(smbios_entries, smbios_entries_len +
size + sizeof(*table));
table = (struct smbios_table *)(smbios_entries + smbios_entries_len);
table->header.type = SMBIOS_TABLE_ENTRY;
table->header.length = cpu_to_le16(sizeof(*table) + size);
memcpy(table->data, header, size);
smbios_entries_len += sizeof(*table) + size;
(*(uint16_t *)smbios_entries) =
cpu_to_le16(le16_to_cpu(*(uint16_t *)smbios_entries) + 1);
/* end: add a copy of the newly loaded blob to legacy smbios_entries */
return;
}
val = qemu_opt_get(opts, "type");
if (val) {
unsigned long type = strtoul(val, NULL, 0);
if (type > SMBIOS_MAX_TYPE) {
error_setg(errp, "out of range!");
return;
}
if (test_bit(type, have_binfile_bitmap)) {
error_setg(errp, "can't add fields, binary file already loaded!");
return;
}
set_bit(type, have_fields_bitmap);
switch (type) {
case 0:
error: Eliminate error_propagate() with Coccinelle, part 1 When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-07 19:06:02 +03:00
if (!qemu_opts_validate(opts, qemu_smbios_type0_opts, errp)) {
return;
}
save_opt(&type0.vendor, opts, "vendor");
save_opt(&type0.version, opts, "version");
save_opt(&type0.date, opts, "date");
type0.uefi = qemu_opt_get_bool(opts, "uefi", false);
val = qemu_opt_get(opts, "release");
if (val) {
if (sscanf(val, "%hhu.%hhu", &type0.major, &type0.minor) != 2) {
error_setg(errp, "Invalid release");
return;
}
type0.have_major_minor = true;
}
return;
case 1:
error: Eliminate error_propagate() with Coccinelle, part 1 When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-07 19:06:02 +03:00
if (!qemu_opts_validate(opts, qemu_smbios_type1_opts, errp)) {
return;
}
save_opt(&type1.manufacturer, opts, "manufacturer");
save_opt(&type1.product, opts, "product");
save_opt(&type1.version, opts, "version");
save_opt(&type1.serial, opts, "serial");
save_opt(&type1.sku, opts, "sku");
save_opt(&type1.family, opts, "family");
val = qemu_opt_get(opts, "uuid");
if (val) {
if (qemu_uuid_parse(val, &qemu_uuid) != 0) {
error_setg(errp, "Invalid UUID");
return;
}
qemu_uuid_set = true;
}
return;
case 2:
error: Eliminate error_propagate() with Coccinelle, part 1 When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-07 19:06:02 +03:00
if (!qemu_opts_validate(opts, qemu_smbios_type2_opts, errp)) {
return;
}
save_opt(&type2.manufacturer, opts, "manufacturer");
save_opt(&type2.product, opts, "product");
save_opt(&type2.version, opts, "version");
save_opt(&type2.serial, opts, "serial");
save_opt(&type2.asset, opts, "asset");
save_opt(&type2.location, opts, "location");
return;
case 3:
error: Eliminate error_propagate() with Coccinelle, part 1 When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-07 19:06:02 +03:00
if (!qemu_opts_validate(opts, qemu_smbios_type3_opts, errp)) {
return;
}
save_opt(&type3.manufacturer, opts, "manufacturer");
save_opt(&type3.version, opts, "version");
save_opt(&type3.serial, opts, "serial");
save_opt(&type3.asset, opts, "asset");
save_opt(&type3.sku, opts, "sku");
return;
case 4:
error: Eliminate error_propagate() with Coccinelle, part 1 When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-07 19:06:02 +03:00
if (!qemu_opts_validate(opts, qemu_smbios_type4_opts, errp)) {
return;
}
save_opt(&type4.sock_pfx, opts, "sock_pfx");
save_opt(&type4.manufacturer, opts, "manufacturer");
save_opt(&type4.version, opts, "version");
save_opt(&type4.serial, opts, "serial");
save_opt(&type4.asset, opts, "asset");
save_opt(&type4.part, opts, "part");
type4.max_speed = qemu_opt_get_number(opts, "max-speed",
DEFAULT_CPU_SPEED);
type4.current_speed = qemu_opt_get_number(opts, "current-speed",
DEFAULT_CPU_SPEED);
if (type4.max_speed > UINT16_MAX ||
type4.current_speed > UINT16_MAX) {
error_setg(errp, "SMBIOS CPU speed is too large (> %d)",
UINT16_MAX);
}
return;
smbios: support setting OEM strings table The cloud-init program currently allows fetching of its data by repurposing of the 'system' type 'serial' field. This is a clear abuse of the serial field that would clash with other valid usage a virt management app might have for that field. Fortunately the SMBIOS defines an "OEM Strings" table whose puporse is to allow exposing of arbitrary vendor specific strings to the operating system. This is perfect for use with cloud-init, or as a way to pass arguments to OS installers such as anaconda. This patch makes it easier to support this with QEMU. e.g. $QEMU -smbios type=11,value=Hello,value=World,value=Tricky,,value=test Which results in the guest seeing dmidecode data Handle 0x0E00, DMI type 11, 5 bytes OEM Strings String 1: Hello String 2: World String 3: Tricky,value=test It is suggested that any app wanting to make use of this OEM strings capability for accepting data from the host mgmt layer should use its name as a string prefix. e.g. to expose OEM strings targetting both cloud init and anaconda in parallel the mgmt app could set $QEMU -smbios type=11,value=cloud-init:ds=nocloud-net;s=http://10.10.0.1:8000/,\ value=anaconda:method=http://dl.fedoraproject.org/pub/fedora/linux/releases/25/x86_64/os which would appear as Handle 0x0E00, DMI type 11, 5 bytes OEM Strings String 1: cloud-init:ds=nocloud-net;s=http://10.10.0.1:8000/ String 2: anaconda:method=http://dl.fedoraproject.org/pub/fedora/linux/releases/25/x86_64/os Use of such string prefixes means the app won't have to care which string slot its data appears in. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-10-28 23:51:36 +03:00
case 11:
error: Eliminate error_propagate() with Coccinelle, part 1 When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-07 19:06:02 +03:00
if (!qemu_opts_validate(opts, qemu_smbios_type11_opts, errp)) {
return;
}
if (!save_opt_list(&type11.nvalues, &type11.values, opts, errp)) {
return;
}
smbios: support setting OEM strings table The cloud-init program currently allows fetching of its data by repurposing of the 'system' type 'serial' field. This is a clear abuse of the serial field that would clash with other valid usage a virt management app might have for that field. Fortunately the SMBIOS defines an "OEM Strings" table whose puporse is to allow exposing of arbitrary vendor specific strings to the operating system. This is perfect for use with cloud-init, or as a way to pass arguments to OS installers such as anaconda. This patch makes it easier to support this with QEMU. e.g. $QEMU -smbios type=11,value=Hello,value=World,value=Tricky,,value=test Which results in the guest seeing dmidecode data Handle 0x0E00, DMI type 11, 5 bytes OEM Strings String 1: Hello String 2: World String 3: Tricky,value=test It is suggested that any app wanting to make use of this OEM strings capability for accepting data from the host mgmt layer should use its name as a string prefix. e.g. to expose OEM strings targetting both cloud init and anaconda in parallel the mgmt app could set $QEMU -smbios type=11,value=cloud-init:ds=nocloud-net;s=http://10.10.0.1:8000/,\ value=anaconda:method=http://dl.fedoraproject.org/pub/fedora/linux/releases/25/x86_64/os which would appear as Handle 0x0E00, DMI type 11, 5 bytes OEM Strings String 1: cloud-init:ds=nocloud-net;s=http://10.10.0.1:8000/ String 2: anaconda:method=http://dl.fedoraproject.org/pub/fedora/linux/releases/25/x86_64/os Use of such string prefixes means the app won't have to care which string slot its data appears in. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-10-28 23:51:36 +03:00
return;
case 17:
error: Eliminate error_propagate() with Coccinelle, part 1 When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-07 19:06:02 +03:00
if (!qemu_opts_validate(opts, qemu_smbios_type17_opts, errp)) {
return;
}
save_opt(&type17.loc_pfx, opts, "loc_pfx");
save_opt(&type17.bank, opts, "bank");
save_opt(&type17.manufacturer, opts, "manufacturer");
save_opt(&type17.serial, opts, "serial");
save_opt(&type17.asset, opts, "asset");
save_opt(&type17.part, opts, "part");
type17.speed = qemu_opt_get_number(opts, "speed", 0);
return;
hw/smbios: support for type 41 (onboard devices extended information) Type 41 defines the attributes of devices that are onboard. The original intent was to imply the BIOS had some level of control over the enablement of the associated devices. If network devices are present in this table, by default, udev will name the corresponding interfaces enoX, X being the instance number. Without such information, udev will fallback to using the PCI ID and this usually gives ens3 or ens4. This can be a bit annoying as the name of the network card may depend on the order of options and may change if a new PCI device is added earlier on the commande line. Being able to provide SMBIOS type 41 entry ensure the name of the interface won't change and helps the user guess the right name without booting a first time. This can be invoked with: $QEMU -netdev user,id=internet -device virtio-net-pci,mac=50:54:00:00:00:42,netdev=internet,id=internet-dev \ -smbios type=41,designation='Onboard LAN',instance=1,kind=ethernet,pcidev=internet-dev The PCI segment is assumed to be 0. This should hold true for most cases. $ dmidecode -t 41 # dmidecode 3.3 Getting SMBIOS data from sysfs. SMBIOS 2.8 present. Handle 0x2900, DMI type 41, 11 bytes Onboard Device Reference Designation: Onboard LAN Type: Ethernet Status: Enabled Type Instance: 1 Bus Address: 0000:00:09.0 $ ip -brief a lo UNKNOWN 127.0.0.1/8 ::1/128 eno1 UP 10.0.2.14/24 fec0::5254:ff:fe00:42/64 fe80::5254:ff:fe00:42/64 Signed-off-by: Vincent Bernat <vincent@bernat.ch> Message-Id: <20210401171138.62970-1-vincent@bernat.ch> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-04-01 20:11:38 +03:00
case 41: {
struct type41_instance *t;
Error *local_err = NULL;
if (!qemu_opts_validate(opts, qemu_smbios_type41_opts, errp)) {
return;
}
t = g_new0(struct type41_instance, 1);
save_opt(&t->designation, opts, "designation");
t->kind = qapi_enum_parse(&type41_kind_lookup,
qemu_opt_get(opts, "kind"),
0, &local_err) + 1;
t->kind |= 0x80; /* enabled */
if (local_err != NULL) {
error_propagate(errp, local_err);
g_free(t);
return;
}
t->instance = qemu_opt_get_number(opts, "instance", 1);
save_opt(&t->pcidev, opts, "pcidev");
QTAILQ_INSERT_TAIL(&type41, t, next);
return;
}
default:
error_setg(errp,
"Don't know how to build fields for SMBIOS type %ld",
type);
return;
}
}
error_setg(errp, "Must specify type= or file=");
}