qemu/net/net.c

1667 lines
43 KiB
C
Raw Normal View History

/*
* QEMU System Emulator
*
* Copyright (c) 2003-2008 Fabrice Bellard
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "net/net.h"
#include "clients.h"
#include "hub.h"
#include "net/slirp.h"
#include "net/eth.h"
#include "util.h"
#include "monitor/monitor.h"
#include "qemu-common.h"
#include "qemu/help_option.h"
#include "qapi/qmp/qerror.h"
#include "qemu/error-report.h"
#include "qemu/sockets.h"
#include "qemu/cutils.h"
#include "qemu/config-file.h"
#include "qmp-commands.h"
#include "hw/qdev.h"
#include "qemu/iov.h"
#include "qemu/main-loop.h"
convert net_client_init() to OptsVisitor The net_client_init() prototype is kept intact. Based on "is_netdev", the QemuOpts-rooted QemuOpt-list is parsed as a Netdev or a NetLegacy. The original meat of net_client_init() is moved to and simplified in net_client_init1(): Fields not common between -net and -netdev are clearly separated. Getting the name for the init functions is cleaner: Netdev::id is mandatory, and all init functions handle a NULL NetLegacy::name. NetLegacy::vlan explicitly depends on -net (see below). Verifying the "type=" option for -netdev can be turned into a switch. Format validation with qemu_opts_validate() can be removed because the visitor covers it. Relatedly, the "net_client_types" array is reduced to an array of init functions that can be directly indexed by opts->kind. (Help text is available in the schema JSON.) The outermost negation in the condition around qemu_find_vlan() was flattened, because it expresses the dependent code's requirements more clearly. VLAN lookup is avoided if there's no init function to pass the VLAN to. Whenever the value of type=... is needed, we substitute NetClientOptionsKind_lookup[kind]. The individual init functions are not converted yet, thus the original QemuOpts instance is passed transparently. v1->v2: - NetLegacy::name is optional. Tracked it through all init functions: they all handle a NULL name. Updated commit message accordingly. v2->v3: - NetLegacy::id is allowed and takes precedence over NetLegacy::name. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-17 18:17:13 +04:00
#include "qapi-visit.h"
#include "qapi/opts-visitor.h"
#include "sysemu/sysemu.h"
#include "net/filter.h"
#include "qapi/string-output-visitor.h"
/* Net bridge is currently not supported for W32. */
#if !defined(_WIN32)
# define CONFIG_NET_BRIDGE
#endif
static VMChangeStateEntry *net_change_state_entry;
static QTAILQ_HEAD(, NetClientState) net_clients;
const char *host_net_devices[] = {
"tap",
"socket",
"dump",
#ifdef CONFIG_NET_BRIDGE
"bridge",
#endif
#ifdef CONFIG_NETMAP
"netmap",
#endif
#ifdef CONFIG_SLIRP
"user",
#endif
#ifdef CONFIG_VDE
"vde",
#endif
"vhost-user",
NULL,
};
/***********************************************************/
/* network device redirectors */
static int get_str_sep(char *buf, int buf_size, const char **pp, int sep)
{
const char *p, *p1;
int len;
p = *pp;
p1 = strchr(p, sep);
if (!p1)
return -1;
len = p1 - p;
p1++;
if (buf_size > 0) {
if (len > buf_size - 1)
len = buf_size - 1;
memcpy(buf, p, len);
buf[len] = '\0';
}
*pp = p1;
return 0;
}
int parse_host_port(struct sockaddr_in *saddr, const char *str)
{
char buf[512];
struct hostent *he;
const char *p, *r;
int port;
p = str;
if (get_str_sep(buf, sizeof(buf), &p, ':') < 0)
return -1;
saddr->sin_family = AF_INET;
if (buf[0] == '\0') {
saddr->sin_addr.s_addr = 0;
} else {
if (qemu_isdigit(buf[0])) {
if (!inet_aton(buf, &saddr->sin_addr))
return -1;
} else {
if ((he = gethostbyname(buf)) == NULL)
return - 1;
saddr->sin_addr = *(struct in_addr *)he->h_addr;
}
}
port = strtol(p, (char **)&r, 0);
if (r == p)
return -1;
saddr->sin_port = htons(port);
return 0;
}
char *qemu_mac_strdup_printf(const uint8_t *macaddr)
{
return g_strdup_printf("%.2x:%.2x:%.2x:%.2x:%.2x:%.2x",
macaddr[0], macaddr[1], macaddr[2],
macaddr[3], macaddr[4], macaddr[5]);
}
void qemu_format_nic_info_str(NetClientState *nc, uint8_t macaddr[6])
{
snprintf(nc->info_str, sizeof(nc->info_str),
"model=%s,macaddr=%02x:%02x:%02x:%02x:%02x:%02x",
nc->model,
macaddr[0], macaddr[1], macaddr[2],
macaddr[3], macaddr[4], macaddr[5]);
}
static int mac_table[256] = {0};
static void qemu_macaddr_set_used(MACAddr *macaddr)
{
int index;
for (index = 0x56; index < 0xFF; index++) {
if (macaddr->a[5] == index) {
mac_table[index]++;
}
}
}
static void qemu_macaddr_set_free(MACAddr *macaddr)
{
int index;
static const MACAddr base = { .a = { 0x52, 0x54, 0x00, 0x12, 0x34, 0 } };
if (memcmp(macaddr->a, &base.a, (sizeof(base.a) - 1)) != 0) {
return;
}
for (index = 0x56; index < 0xFF; index++) {
if (macaddr->a[5] == index) {
mac_table[index]--;
}
}
}
static int qemu_macaddr_get_free(void)
{
int index;
for (index = 0x56; index < 0xFF; index++) {
if (mac_table[index] == 0) {
return index;
}
}
return -1;
}
void qemu_macaddr_default_if_unset(MACAddr *macaddr)
{
static const MACAddr zero = { .a = { 0,0,0,0,0,0 } };
static const MACAddr base = { .a = { 0x52, 0x54, 0x00, 0x12, 0x34, 0 } };
if (memcmp(macaddr, &zero, sizeof(zero)) != 0) {
if (memcmp(macaddr->a, &base.a, (sizeof(base.a) - 1)) != 0) {
return;
} else {
qemu_macaddr_set_used(macaddr);
return;
}
}
macaddr->a[0] = 0x52;
macaddr->a[1] = 0x54;
macaddr->a[2] = 0x00;
macaddr->a[3] = 0x12;
macaddr->a[4] = 0x34;
macaddr->a[5] = qemu_macaddr_get_free();
qemu_macaddr_set_used(macaddr);
}
/**
* Generate a name for net client
*
* Only net clients created with the legacy -net option and NICs need this.
*/
static char *assign_name(NetClientState *nc1, const char *model)
{
NetClientState *nc;
int id = 0;
QTAILQ_FOREACH(nc, &net_clients, next) {
if (nc == nc1) {
continue;
}
if (strcmp(nc->model, model) == 0) {
id++;
}
}
return g_strdup_printf("%s.%d", model, id);
}
static void qemu_net_client_destructor(NetClientState *nc)
{
g_free(nc);
}
static void qemu_net_client_setup(NetClientState *nc,
NetClientInfo *info,
NetClientState *peer,
const char *model,
const char *name,
NetClientDestructor *destructor)
{
nc->info = info;
nc->model = g_strdup(model);
if (name) {
nc->name = g_strdup(name);
} else {
nc->name = assign_name(nc, model);
}
if (peer) {
assert(!peer->peer);
nc->peer = peer;
peer->peer = nc;
}
QTAILQ_INSERT_TAIL(&net_clients, nc, next);
nc->incoming_queue = qemu_new_net_queue(qemu_deliver_packet_iov, nc);
nc->destructor = destructor;
QTAILQ_INIT(&nc->filters);
}
NetClientState *qemu_new_net_client(NetClientInfo *info,
NetClientState *peer,
const char *model,
const char *name)
{
NetClientState *nc;
assert(info->size >= sizeof(NetClientState));
nc = g_malloc0(info->size);
qemu_net_client_setup(nc, info, peer, model, name,
qemu_net_client_destructor);
return nc;
}
NICState *qemu_new_nic(NetClientInfo *info,
NICConf *conf,
const char *model,
const char *name,
void *opaque)
{
NetClientState **peers = conf->peers.ncs;
NICState *nic;
int i, queues = MAX(1, conf->peers.queues);
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
assert(info->type == NET_CLIENT_DRIVER_NIC);
assert(info->size >= sizeof(NICState));
nic = g_malloc0(info->size + sizeof(NetClientState) * queues);
nic->ncs = (void *)nic + info->size;
nic->conf = conf;
nic->opaque = opaque;
for (i = 0; i < queues; i++) {
qemu_net_client_setup(&nic->ncs[i], info, peers[i], model, name,
NULL);
nic->ncs[i].queue_index = i;
}
return nic;
}
NetClientState *qemu_get_subqueue(NICState *nic, int queue_index)
{
return nic->ncs + queue_index;
}
NetClientState *qemu_get_queue(NICState *nic)
{
return qemu_get_subqueue(nic, 0);
}
NICState *qemu_get_nic(NetClientState *nc)
{
NetClientState *nc0 = nc - nc->queue_index;
return (NICState *)((void *)nc0 - nc->info->size);
}
void *qemu_get_nic_opaque(NetClientState *nc)
{
NICState *nic = qemu_get_nic(nc);
return nic->opaque;
}
static void qemu_cleanup_net_client(NetClientState *nc)
{
QTAILQ_REMOVE(&net_clients, nc, next);
if (nc->info->cleanup) {
nc->info->cleanup(nc);
}
}
static void qemu_free_net_client(NetClientState *nc)
{
if (nc->incoming_queue) {
qemu_del_net_queue(nc->incoming_queue);
}
if (nc->peer) {
nc->peer->peer = NULL;
}
g_free(nc->name);
g_free(nc->model);
if (nc->destructor) {
nc->destructor(nc);
}
}
void qemu_del_net_client(NetClientState *nc)
{
NetClientState *ncs[MAX_QUEUE_NUM];
int queues, i;
NetFilterState *nf, *next;
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
assert(nc->info->type != NET_CLIENT_DRIVER_NIC);
/* If the NetClientState belongs to a multiqueue backend, we will change all
* other NetClientStates also.
*/
queues = qemu_find_net_clients_except(nc->name, ncs,
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
NET_CLIENT_DRIVER_NIC,
MAX_QUEUE_NUM);
assert(queues != 0);
QTAILQ_FOREACH_SAFE(nf, &nc->filters, next, next) {
object_unparent(OBJECT(nf));
}
/* If there is a peer NIC, delete and cleanup client, but do not free. */
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
if (nc->peer && nc->peer->info->type == NET_CLIENT_DRIVER_NIC) {
NICState *nic = qemu_get_nic(nc->peer);
if (nic->peer_deleted) {
return;
}
nic->peer_deleted = true;
for (i = 0; i < queues; i++) {
ncs[i]->peer->link_down = true;
}
if (nc->peer->info->link_status_changed) {
nc->peer->info->link_status_changed(nc->peer);
}
for (i = 0; i < queues; i++) {
qemu_cleanup_net_client(ncs[i]);
}
return;
}
for (i = 0; i < queues; i++) {
qemu_cleanup_net_client(ncs[i]);
qemu_free_net_client(ncs[i]);
}
}
void qemu_del_nic(NICState *nic)
{
int i, queues = MAX(nic->conf->peers.queues, 1);
qemu_macaddr_set_free(&nic->conf->macaddr);
/* If this is a peer NIC and peer has already been deleted, free it now. */
if (nic->peer_deleted) {
for (i = 0; i < queues; i++) {
qemu_free_net_client(qemu_get_subqueue(nic, i)->peer);
}
}
for (i = queues - 1; i >= 0; i--) {
NetClientState *nc = qemu_get_subqueue(nic, i);
qemu_cleanup_net_client(nc);
qemu_free_net_client(nc);
}
g_free(nic);
}
void qemu_foreach_nic(qemu_nic_foreach func, void *opaque)
{
NetClientState *nc;
QTAILQ_FOREACH(nc, &net_clients, next) {
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
if (nc->info->type == NET_CLIENT_DRIVER_NIC) {
if (nc->queue_index == 0) {
func(qemu_get_nic(nc), opaque);
}
}
}
}
bool qemu_has_ufo(NetClientState *nc)
{
if (!nc || !nc->info->has_ufo) {
return false;
}
return nc->info->has_ufo(nc);
}
bool qemu_has_vnet_hdr(NetClientState *nc)
{
if (!nc || !nc->info->has_vnet_hdr) {
return false;
}
return nc->info->has_vnet_hdr(nc);
}
bool qemu_has_vnet_hdr_len(NetClientState *nc, int len)
{
if (!nc || !nc->info->has_vnet_hdr_len) {
return false;
}
return nc->info->has_vnet_hdr_len(nc, len);
}
void qemu_using_vnet_hdr(NetClientState *nc, bool enable)
{
if (!nc || !nc->info->using_vnet_hdr) {
return;
}
nc->info->using_vnet_hdr(nc, enable);
}
void qemu_set_offload(NetClientState *nc, int csum, int tso4, int tso6,
int ecn, int ufo)
{
if (!nc || !nc->info->set_offload) {
return;
}
nc->info->set_offload(nc, csum, tso4, tso6, ecn, ufo);
}
void qemu_set_vnet_hdr_len(NetClientState *nc, int len)
{
if (!nc || !nc->info->set_vnet_hdr_len) {
return;
}
nc->info->set_vnet_hdr_len(nc, len);
}
int qemu_set_vnet_le(NetClientState *nc, bool is_le)
{
#ifdef HOST_WORDS_BIGENDIAN
if (!nc || !nc->info->set_vnet_le) {
return -ENOSYS;
}
return nc->info->set_vnet_le(nc, is_le);
#else
return 0;
#endif
}
int qemu_set_vnet_be(NetClientState *nc, bool is_be)
{
#ifdef HOST_WORDS_BIGENDIAN
return 0;
#else
if (!nc || !nc->info->set_vnet_be) {
return -ENOSYS;
}
return nc->info->set_vnet_be(nc, is_be);
#endif
}
int qemu_can_send_packet(NetClientState *sender)
{
int vm_running = runstate_is_running();
if (!vm_running) {
return 0;
}
if (!sender->peer) {
return 1;
}
if (sender->peer->receive_disabled) {
return 0;
} else if (sender->peer->info->can_receive &&
!sender->peer->info->can_receive(sender->peer)) {
return 0;
}
return 1;
}
static ssize_t filter_receive_iov(NetClientState *nc,
NetFilterDirection direction,
NetClientState *sender,
unsigned flags,
const struct iovec *iov,
int iovcnt,
NetPacketSent *sent_cb)
{
ssize_t ret = 0;
NetFilterState *nf = NULL;
if (direction == NET_FILTER_DIRECTION_TX) {
QTAILQ_FOREACH(nf, &nc->filters, next) {
ret = qemu_netfilter_receive(nf, direction, sender, flags, iov,
iovcnt, sent_cb);
if (ret) {
return ret;
}
}
} else {
QTAILQ_FOREACH_REVERSE(nf, &nc->filters, NetFilterHead, next) {
ret = qemu_netfilter_receive(nf, direction, sender, flags, iov,
iovcnt, sent_cb);
if (ret) {
return ret;
}
}
}
return ret;
}
static ssize_t filter_receive(NetClientState *nc,
NetFilterDirection direction,
NetClientState *sender,
unsigned flags,
const uint8_t *data,
size_t size,
NetPacketSent *sent_cb)
{
struct iovec iov = {
.iov_base = (void *)data,
.iov_len = size
};
return filter_receive_iov(nc, direction, sender, flags, &iov, 1, sent_cb);
}
void qemu_purge_queued_packets(NetClientState *nc)
{
if (!nc->peer) {
return;
}
qemu_net_queue_purge(nc->peer->incoming_queue, nc);
}
static
void qemu_flush_or_purge_queued_packets(NetClientState *nc, bool purge)
{
nc->receive_disabled = 0;
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
if (nc->peer && nc->peer->info->type == NET_CLIENT_DRIVER_HUBPORT) {
if (net_hub_flush(nc->peer)) {
qemu_notify_event();
}
}
if (qemu_net_queue_flush(nc->incoming_queue)) {
/* We emptied the queue successfully, signal to the IO thread to repoll
* the file descriptor (for tap, for example).
*/
qemu_notify_event();
} else if (purge) {
/* Unable to empty the queue, purge remaining packets */
qemu_net_queue_purge(nc->incoming_queue, nc);
}
}
void qemu_flush_queued_packets(NetClientState *nc)
{
qemu_flush_or_purge_queued_packets(nc, false);
}
static ssize_t qemu_send_packet_async_with_flags(NetClientState *sender,
unsigned flags,
const uint8_t *buf, int size,
NetPacketSent *sent_cb)
{
NetQueue *queue;
int ret;
#ifdef DEBUG_NET
printf("qemu_send_packet_async:\n");
qemu_hexdump((const char *)buf, stdout, "net", size);
#endif
if (sender->link_down || !sender->peer) {
return size;
}
/* Let filters handle the packet first */
ret = filter_receive(sender, NET_FILTER_DIRECTION_TX,
sender, flags, buf, size, sent_cb);
if (ret) {
return ret;
}
ret = filter_receive(sender->peer, NET_FILTER_DIRECTION_RX,
sender, flags, buf, size, sent_cb);
if (ret) {
return ret;
}
queue = sender->peer->incoming_queue;
return qemu_net_queue_send(queue, sender, flags, buf, size, sent_cb);
}
ssize_t qemu_send_packet_async(NetClientState *sender,
const uint8_t *buf, int size,
NetPacketSent *sent_cb)
{
return qemu_send_packet_async_with_flags(sender, QEMU_NET_PACKET_FLAG_NONE,
buf, size, sent_cb);
}
void qemu_send_packet(NetClientState *nc, const uint8_t *buf, int size)
{
qemu_send_packet_async(nc, buf, size, NULL);
}
ssize_t qemu_send_packet_raw(NetClientState *nc, const uint8_t *buf, int size)
{
return qemu_send_packet_async_with_flags(nc, QEMU_NET_PACKET_FLAG_RAW,
buf, size, NULL);
}
static ssize_t nc_sendv_compat(NetClientState *nc, const struct iovec *iov,
int iovcnt, unsigned flags)
{
uint8_t *buf = NULL;
uint8_t *buffer;
size_t offset;
ssize_t ret;
if (iovcnt == 1) {
buffer = iov[0].iov_base;
offset = iov[0].iov_len;
} else {
offset = iov_size(iov, iovcnt);
if (offset > NET_BUFSIZE) {
return -1;
}
buf = g_malloc(offset);
buffer = buf;
offset = iov_to_buf(iov, iovcnt, 0, buf, offset);
}
if (flags & QEMU_NET_PACKET_FLAG_RAW && nc->info->receive_raw) {
ret = nc->info->receive_raw(nc, buffer, offset);
} else {
ret = nc->info->receive(nc, buffer, offset);
}
g_free(buf);
return ret;
}
ssize_t qemu_deliver_packet_iov(NetClientState *sender,
unsigned flags,
const struct iovec *iov,
int iovcnt,
void *opaque)
{
NetClientState *nc = opaque;
int ret;
if (nc->link_down) {
return iov_size(iov, iovcnt);
}
if (nc->receive_disabled) {
return 0;
}
if (nc->info->receive_iov && !(flags & QEMU_NET_PACKET_FLAG_RAW)) {
ret = nc->info->receive_iov(nc, iov, iovcnt);
} else {
ret = nc_sendv_compat(nc, iov, iovcnt, flags);
}
if (ret == 0) {
nc->receive_disabled = 1;
}
return ret;
}
ssize_t qemu_sendv_packet_async(NetClientState *sender,
const struct iovec *iov, int iovcnt,
NetPacketSent *sent_cb)
{
NetQueue *queue;
int ret;
if (sender->link_down || !sender->peer) {
return iov_size(iov, iovcnt);
}
/* Let filters handle the packet first */
ret = filter_receive_iov(sender, NET_FILTER_DIRECTION_TX, sender,
QEMU_NET_PACKET_FLAG_NONE, iov, iovcnt, sent_cb);
if (ret) {
return ret;
}
ret = filter_receive_iov(sender->peer, NET_FILTER_DIRECTION_RX, sender,
QEMU_NET_PACKET_FLAG_NONE, iov, iovcnt, sent_cb);
if (ret) {
return ret;
}
queue = sender->peer->incoming_queue;
return qemu_net_queue_send_iov(queue, sender,
QEMU_NET_PACKET_FLAG_NONE,
iov, iovcnt, sent_cb);
}
ssize_t
qemu_sendv_packet(NetClientState *nc, const struct iovec *iov, int iovcnt)
{
return qemu_sendv_packet_async(nc, iov, iovcnt, NULL);
}
NetClientState *qemu_find_netdev(const char *id)
{
NetClientState *nc;
QTAILQ_FOREACH(nc, &net_clients, next) {
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
if (nc->info->type == NET_CLIENT_DRIVER_NIC)
Fix netdev name lookup in -device, device_add, netdev_del qemu_find_netdev() looks up members of non_vlan_clients by name. It happily returns the first match. Trouble is the names need not be unique. non_vlan_clients contains host parts (netdevs) and guest parts (NICs). Netdevs have unique names: a netdev's name is a (mandatory) qemu_netdev_opts ID, and these are unique. NIC names are not unique. If a NIC has a qdev ID (which is unique), that's its name. Else, we make up a name. The made-up names are unique, but they can clash with qdev IDs. Even if NICs had unique names, they could still clash with netdev names. Callers of qemu_find_netdev(): * net_init_nic() wants a netdev. It happens to work because it runs before NICs get added to non_vlan_clients. * do_netdev_del() wants a netdev. If it gets a NIC, it complains and fails. Bug: a netdev with the same name that comes later in non_vlan_clients can't be deleted: $ qemu-system-x86_64 -nodefaults -vnc :0 -S -monitor stdio -netdev user,id=hostnet0 -device virtio-net-pci,netdev=hostnet0,id=virtio1 [...] (qemu) netdev_add user,id=virtio1 (qemu) info network Devices not on any VLAN: hostnet0: net=10.0.2.0, restricted=n peer=virtio1 virtio1: model=virtio-net-pci,macaddr=52:54:00:12:34:56 peer=hostnet0 virtio1: net=10.0.2.0, restricted=n (qemu) netdev_del virtio1 Device 'virtio1' not found * parse_netdev() wants a netdev. If it gets a NIC, it gets confused. With the test setup above: (qemu) device_add virtio-net-pci,netdev=virtio1 Property 'virtio-net-pci.netdev' can't take value 'virtio1', it's in use You can even connect two NICs to each other: $ qemu-system-x86_64 -nodefaults -vnc :0 -S -monitor stdio -device virtio-net-pci,id=virtio1 -device e1000,netdev=virtio1 [...] Devices not on any VLAN: virtio1: model=virtio-net-pci,macaddr=52:54:00:12:34:56 peer=e1000.0 e1000.0: model=e1000,macaddr=52:54:00:12:34:57 peer=virtio1 (qemu) q Segmentation fault (core dumped) * do_set_link() works fine for both netdevs and NICs. Whether it really makes sense for netdevs is debatable, but that's outside this patch's scope. Change qemu_find_netdev() to return only netdevs. This fixes the netdev_del and device_add/-device bugs demonstrated above. To avoid changing set_link, make do_set_link() search non_vlan_clients by hand instead of calling qemu_find_netdev(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-06-16 20:45:37 +04:00
continue;
if (!strcmp(nc->name, id)) {
return nc;
}
}
return NULL;
}
int qemu_find_net_clients_except(const char *id, NetClientState **ncs,
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
NetClientDriver type, int max)
{
NetClientState *nc;
int ret = 0;
QTAILQ_FOREACH(nc, &net_clients, next) {
if (nc->info->type == type) {
continue;
}
if (!id || !strcmp(nc->name, id)) {
if (ret < max) {
ncs[ret] = nc;
}
ret++;
}
}
return ret;
}
static int nic_get_free_idx(void)
{
int index;
for (index = 0; index < MAX_NICS; index++)
if (!nd_table[index].used)
return index;
return -1;
}
int qemu_show_nic_models(const char *arg, const char *const *models)
{
int i;
if (!arg || !is_help_option(arg)) {
return 0;
}
fprintf(stderr, "qemu: Supported NIC models: ");
for (i = 0 ; models[i]; i++)
fprintf(stderr, "%s%c", models[i], models[i+1] ? ',' : '\n');
return 1;
}
void qemu_check_nic_model(NICInfo *nd, const char *model)
{
const char *models[2];
models[0] = model;
models[1] = NULL;
if (qemu_show_nic_models(nd->model, models))
exit(0);
if (qemu_find_nic_model(nd, models, model) < 0)
exit(1);
}
int qemu_find_nic_model(NICInfo *nd, const char * const *models,
const char *default_model)
{
int i;
if (!nd->model)
nd->model = g_strdup(default_model);
for (i = 0 ; models[i]; i++) {
if (strcmp(nd->model, models[i]) == 0)
return i;
}
error_report("Unsupported NIC model: %s", nd->model);
return -1;
}
static int net_init_nic(const Netdev *netdev, const char *name,
NetClientState *peer, Error **errp)
{
int idx;
NICInfo *nd;
const NetLegacyNicOptions *nic;
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
assert(netdev->type == NET_CLIENT_DRIVER_NIC);
nic = &netdev->u.nic;
idx = nic_get_free_idx();
if (idx == -1 || nb_nics >= MAX_NICS) {
error_setg(errp, "too many NICs");
return -1;
}
nd = &nd_table[idx];
memset(nd, 0, sizeof(*nd));
if (nic->has_netdev) {
nd->netdev = qemu_find_netdev(nic->netdev);
if (!nd->netdev) {
error_setg(errp, "netdev '%s' not found", nic->netdev);
return -1;
}
} else {
assert(peer);
nd->netdev = peer;
}
nd->name = g_strdup(name);
if (nic->has_model) {
nd->model = g_strdup(nic->model);
}
if (nic->has_addr) {
nd->devaddr = g_strdup(nic->addr);
}
if (nic->has_macaddr &&
net_parse_macaddr(nd->macaddr.a, nic->macaddr) < 0) {
error_setg(errp, "invalid syntax for ethernet address");
return -1;
}
if (nic->has_macaddr &&
is_multicast_ether_addr(nd->macaddr.a)) {
error_setg(errp,
"NIC cannot have multicast MAC address (odd 1st byte)");
return -1;
}
qemu_macaddr_default_if_unset(&nd->macaddr);
if (nic->has_vectors) {
if (nic->vectors > 0x7ffffff) {
error_setg(errp, "invalid # of vectors: %"PRIu32, nic->vectors);
return -1;
}
nd->nvectors = nic->vectors;
} else {
nd->nvectors = DEV_NVECTORS_UNSPECIFIED;
}
nd->used = 1;
nb_nics++;
return idx;
}
convert net_client_init() to OptsVisitor The net_client_init() prototype is kept intact. Based on "is_netdev", the QemuOpts-rooted QemuOpt-list is parsed as a Netdev or a NetLegacy. The original meat of net_client_init() is moved to and simplified in net_client_init1(): Fields not common between -net and -netdev are clearly separated. Getting the name for the init functions is cleaner: Netdev::id is mandatory, and all init functions handle a NULL NetLegacy::name. NetLegacy::vlan explicitly depends on -net (see below). Verifying the "type=" option for -netdev can be turned into a switch. Format validation with qemu_opts_validate() can be removed because the visitor covers it. Relatedly, the "net_client_types" array is reduced to an array of init functions that can be directly indexed by opts->kind. (Help text is available in the schema JSON.) The outermost negation in the condition around qemu_find_vlan() was flattened, because it expresses the dependent code's requirements more clearly. VLAN lookup is avoided if there's no init function to pass the VLAN to. Whenever the value of type=... is needed, we substitute NetClientOptionsKind_lookup[kind]. The individual init functions are not converted yet, thus the original QemuOpts instance is passed transparently. v1->v2: - NetLegacy::name is optional. Tracked it through all init functions: they all handle a NULL name. Updated commit message accordingly. v2->v3: - NetLegacy::id is allowed and takes precedence over NetLegacy::name. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-17 18:17:13 +04:00
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
static int (* const net_client_init_fun[NET_CLIENT_DRIVER__MAX])(
const Netdev *netdev,
convert net_client_init() to OptsVisitor The net_client_init() prototype is kept intact. Based on "is_netdev", the QemuOpts-rooted QemuOpt-list is parsed as a Netdev or a NetLegacy. The original meat of net_client_init() is moved to and simplified in net_client_init1(): Fields not common between -net and -netdev are clearly separated. Getting the name for the init functions is cleaner: Netdev::id is mandatory, and all init functions handle a NULL NetLegacy::name. NetLegacy::vlan explicitly depends on -net (see below). Verifying the "type=" option for -netdev can be turned into a switch. Format validation with qemu_opts_validate() can be removed because the visitor covers it. Relatedly, the "net_client_types" array is reduced to an array of init functions that can be directly indexed by opts->kind. (Help text is available in the schema JSON.) The outermost negation in the condition around qemu_find_vlan() was flattened, because it expresses the dependent code's requirements more clearly. VLAN lookup is avoided if there's no init function to pass the VLAN to. Whenever the value of type=... is needed, we substitute NetClientOptionsKind_lookup[kind]. The individual init functions are not converted yet, thus the original QemuOpts instance is passed transparently. v1->v2: - NetLegacy::name is optional. Tracked it through all init functions: they all handle a NULL name. Updated commit message accordingly. v2->v3: - NetLegacy::id is allowed and takes precedence over NetLegacy::name. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-17 18:17:13 +04:00
const char *name,
NetClientState *peer, Error **errp) = {
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
[NET_CLIENT_DRIVER_NIC] = net_init_nic,
#ifdef CONFIG_SLIRP
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
[NET_CLIENT_DRIVER_USER] = net_init_slirp,
#endif
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
[NET_CLIENT_DRIVER_TAP] = net_init_tap,
[NET_CLIENT_DRIVER_SOCKET] = net_init_socket,
#ifdef CONFIG_VDE
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
[NET_CLIENT_DRIVER_VDE] = net_init_vde,
#endif
#ifdef CONFIG_NETMAP
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
[NET_CLIENT_DRIVER_NETMAP] = net_init_netmap,
#endif
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
[NET_CLIENT_DRIVER_DUMP] = net_init_dump,
#ifdef CONFIG_NET_BRIDGE
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
[NET_CLIENT_DRIVER_BRIDGE] = net_init_bridge,
convert net_client_init() to OptsVisitor The net_client_init() prototype is kept intact. Based on "is_netdev", the QemuOpts-rooted QemuOpt-list is parsed as a Netdev or a NetLegacy. The original meat of net_client_init() is moved to and simplified in net_client_init1(): Fields not common between -net and -netdev are clearly separated. Getting the name for the init functions is cleaner: Netdev::id is mandatory, and all init functions handle a NULL NetLegacy::name. NetLegacy::vlan explicitly depends on -net (see below). Verifying the "type=" option for -netdev can be turned into a switch. Format validation with qemu_opts_validate() can be removed because the visitor covers it. Relatedly, the "net_client_types" array is reduced to an array of init functions that can be directly indexed by opts->kind. (Help text is available in the schema JSON.) The outermost negation in the condition around qemu_find_vlan() was flattened, because it expresses the dependent code's requirements more clearly. VLAN lookup is avoided if there's no init function to pass the VLAN to. Whenever the value of type=... is needed, we substitute NetClientOptionsKind_lookup[kind]. The individual init functions are not converted yet, thus the original QemuOpts instance is passed transparently. v1->v2: - NetLegacy::name is optional. Tracked it through all init functions: they all handle a NULL name. Updated commit message accordingly. v2->v3: - NetLegacy::id is allowed and takes precedence over NetLegacy::name. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-17 18:17:13 +04:00
#endif
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
[NET_CLIENT_DRIVER_HUBPORT] = net_init_hubport,
#ifdef CONFIG_VHOST_NET_USED
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
[NET_CLIENT_DRIVER_VHOST_USER] = net_init_vhost_user,
#endif
#ifdef CONFIG_L2TPV3
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
[NET_CLIENT_DRIVER_L2TPV3] = net_init_l2tpv3,
#endif
};
convert net_client_init() to OptsVisitor The net_client_init() prototype is kept intact. Based on "is_netdev", the QemuOpts-rooted QemuOpt-list is parsed as a Netdev or a NetLegacy. The original meat of net_client_init() is moved to and simplified in net_client_init1(): Fields not common between -net and -netdev are clearly separated. Getting the name for the init functions is cleaner: Netdev::id is mandatory, and all init functions handle a NULL NetLegacy::name. NetLegacy::vlan explicitly depends on -net (see below). Verifying the "type=" option for -netdev can be turned into a switch. Format validation with qemu_opts_validate() can be removed because the visitor covers it. Relatedly, the "net_client_types" array is reduced to an array of init functions that can be directly indexed by opts->kind. (Help text is available in the schema JSON.) The outermost negation in the condition around qemu_find_vlan() was flattened, because it expresses the dependent code's requirements more clearly. VLAN lookup is avoided if there's no init function to pass the VLAN to. Whenever the value of type=... is needed, we substitute NetClientOptionsKind_lookup[kind]. The individual init functions are not converted yet, thus the original QemuOpts instance is passed transparently. v1->v2: - NetLegacy::name is optional. Tracked it through all init functions: they all handle a NULL name. Updated commit message accordingly. v2->v3: - NetLegacy::id is allowed and takes precedence over NetLegacy::name. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-17 18:17:13 +04:00
static int net_client_init1(const void *object, bool is_netdev, Error **errp)
{
Netdev legacy = {0};
const Netdev *netdev;
const char *name;
NetClientState *peer = NULL;
if (is_netdev) {
netdev = object;
name = netdev->id;
convert net_client_init() to OptsVisitor The net_client_init() prototype is kept intact. Based on "is_netdev", the QemuOpts-rooted QemuOpt-list is parsed as a Netdev or a NetLegacy. The original meat of net_client_init() is moved to and simplified in net_client_init1(): Fields not common between -net and -netdev are clearly separated. Getting the name for the init functions is cleaner: Netdev::id is mandatory, and all init functions handle a NULL NetLegacy::name. NetLegacy::vlan explicitly depends on -net (see below). Verifying the "type=" option for -netdev can be turned into a switch. Format validation with qemu_opts_validate() can be removed because the visitor covers it. Relatedly, the "net_client_types" array is reduced to an array of init functions that can be directly indexed by opts->kind. (Help text is available in the schema JSON.) The outermost negation in the condition around qemu_find_vlan() was flattened, because it expresses the dependent code's requirements more clearly. VLAN lookup is avoided if there's no init function to pass the VLAN to. Whenever the value of type=... is needed, we substitute NetClientOptionsKind_lookup[kind]. The individual init functions are not converted yet, thus the original QemuOpts instance is passed transparently. v1->v2: - NetLegacy::name is optional. Tracked it through all init functions: they all handle a NULL name. Updated commit message accordingly. v2->v3: - NetLegacy::id is allowed and takes precedence over NetLegacy::name. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-17 18:17:13 +04:00
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
if (netdev->type == NET_CLIENT_DRIVER_DUMP ||
netdev->type == NET_CLIENT_DRIVER_NIC ||
!net_client_init_fun[netdev->type]) {
error_setg(errp, QERR_INVALID_PARAMETER_VALUE, "type",
"a netdev backend type");
return -1;
}
convert net_client_init() to OptsVisitor The net_client_init() prototype is kept intact. Based on "is_netdev", the QemuOpts-rooted QemuOpt-list is parsed as a Netdev or a NetLegacy. The original meat of net_client_init() is moved to and simplified in net_client_init1(): Fields not common between -net and -netdev are clearly separated. Getting the name for the init functions is cleaner: Netdev::id is mandatory, and all init functions handle a NULL NetLegacy::name. NetLegacy::vlan explicitly depends on -net (see below). Verifying the "type=" option for -netdev can be turned into a switch. Format validation with qemu_opts_validate() can be removed because the visitor covers it. Relatedly, the "net_client_types" array is reduced to an array of init functions that can be directly indexed by opts->kind. (Help text is available in the schema JSON.) The outermost negation in the condition around qemu_find_vlan() was flattened, because it expresses the dependent code's requirements more clearly. VLAN lookup is avoided if there's no init function to pass the VLAN to. Whenever the value of type=... is needed, we substitute NetClientOptionsKind_lookup[kind]. The individual init functions are not converted yet, thus the original QemuOpts instance is passed transparently. v1->v2: - NetLegacy::name is optional. Tracked it through all init functions: they all handle a NULL name. Updated commit message accordingly. v2->v3: - NetLegacy::id is allowed and takes precedence over NetLegacy::name. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-17 18:17:13 +04:00
} else {
const NetLegacy *net = object;
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
const NetLegacyOptions *opts = net->opts;
legacy.id = net->id;
netdev = &legacy;
convert net_client_init() to OptsVisitor The net_client_init() prototype is kept intact. Based on "is_netdev", the QemuOpts-rooted QemuOpt-list is parsed as a Netdev or a NetLegacy. The original meat of net_client_init() is moved to and simplified in net_client_init1(): Fields not common between -net and -netdev are clearly separated. Getting the name for the init functions is cleaner: Netdev::id is mandatory, and all init functions handle a NULL NetLegacy::name. NetLegacy::vlan explicitly depends on -net (see below). Verifying the "type=" option for -netdev can be turned into a switch. Format validation with qemu_opts_validate() can be removed because the visitor covers it. Relatedly, the "net_client_types" array is reduced to an array of init functions that can be directly indexed by opts->kind. (Help text is available in the schema JSON.) The outermost negation in the condition around qemu_find_vlan() was flattened, because it expresses the dependent code's requirements more clearly. VLAN lookup is avoided if there's no init function to pass the VLAN to. Whenever the value of type=... is needed, we substitute NetClientOptionsKind_lookup[kind]. The individual init functions are not converted yet, thus the original QemuOpts instance is passed transparently. v1->v2: - NetLegacy::name is optional. Tracked it through all init functions: they all handle a NULL name. Updated commit message accordingly. v2->v3: - NetLegacy::id is allowed and takes precedence over NetLegacy::name. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-17 18:17:13 +04:00
/* missing optional values have been initialized to "all bits zero" */
name = net->has_id ? net->id : net->name;
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
/* Map the old options to the new flat type */
switch (opts->type) {
case NET_LEGACY_OPTIONS_KIND_NONE:
return 0; /* nothing to do */
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
case NET_LEGACY_OPTIONS_KIND_NIC:
legacy.type = NET_CLIENT_DRIVER_NIC;
legacy.u.nic = *opts->u.nic.data;
break;
case NET_LEGACY_OPTIONS_KIND_USER:
legacy.type = NET_CLIENT_DRIVER_USER;
legacy.u.user = *opts->u.user.data;
break;
case NET_LEGACY_OPTIONS_KIND_TAP:
legacy.type = NET_CLIENT_DRIVER_TAP;
legacy.u.tap = *opts->u.tap.data;
break;
case NET_LEGACY_OPTIONS_KIND_L2TPV3:
legacy.type = NET_CLIENT_DRIVER_L2TPV3;
legacy.u.l2tpv3 = *opts->u.l2tpv3.data;
break;
case NET_LEGACY_OPTIONS_KIND_SOCKET:
legacy.type = NET_CLIENT_DRIVER_SOCKET;
legacy.u.socket = *opts->u.socket.data;
break;
case NET_LEGACY_OPTIONS_KIND_VDE:
legacy.type = NET_CLIENT_DRIVER_VDE;
legacy.u.vde = *opts->u.vde.data;
break;
case NET_LEGACY_OPTIONS_KIND_DUMP:
legacy.type = NET_CLIENT_DRIVER_DUMP;
legacy.u.dump = *opts->u.dump.data;
break;
case NET_LEGACY_OPTIONS_KIND_BRIDGE:
legacy.type = NET_CLIENT_DRIVER_BRIDGE;
legacy.u.bridge = *opts->u.bridge.data;
break;
case NET_LEGACY_OPTIONS_KIND_NETMAP:
legacy.type = NET_CLIENT_DRIVER_NETMAP;
legacy.u.netmap = *opts->u.netmap.data;
break;
case NET_LEGACY_OPTIONS_KIND_VHOST_USER:
legacy.type = NET_CLIENT_DRIVER_VHOST_USER;
legacy.u.vhost_user = *opts->u.vhost_user.data;
break;
default:
abort();
}
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
if (!net_client_init_fun[netdev->type]) {
error_setg(errp, QERR_INVALID_PARAMETER_VALUE, "type",
"a net backend type (maybe it is not compiled "
"into this binary)");
return -1;
}
/* Do not add to a vlan if it's a nic with a netdev= parameter. */
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
if (netdev->type != NET_CLIENT_DRIVER_NIC ||
qapi: Don't special-case simple union wrappers Simple unions were carrying a special case that hid their 'data' QMP member from the resulting C struct, via the hack method QAPISchemaObjectTypeVariant.simple_union_type(). But by using the work we started by unboxing flat union and alternate branches, coupled with the ability to visit the members of an implicit type, we can now expose the simple union's implicit type in qapi-types.h: | struct q_obj_ImageInfoSpecificQCow2_wrapper { | ImageInfoSpecificQCow2 *data; | }; | | struct q_obj_ImageInfoSpecificVmdk_wrapper { | ImageInfoSpecificVmdk *data; | }; ... | struct ImageInfoSpecific { | ImageInfoSpecificKind type; | union { /* union tag is @type */ | void *data; |- ImageInfoSpecificQCow2 *qcow2; |- ImageInfoSpecificVmdk *vmdk; |+ q_obj_ImageInfoSpecificQCow2_wrapper qcow2; |+ q_obj_ImageInfoSpecificVmdk_wrapper vmdk; | } u; | }; Doing this removes asymmetry between QAPI's QMP side and its C side (both sides now expose 'data'), and means that the treatment of a simple union as sugar for a flat union is now equivalent in both languages (previously the two approaches used a different layer of dereferencing, where the simple union could be converted to a flat union with equivalent C layout but different {} on the wire, or to an equivalent QMP wire form but with different C representation). Using the implicit type also lets us get rid of the simple_union_type() hack. Of course, now all clients of simple unions have to adjust from using su->u.member to using su->u.member.data; while this touches a number of files in the tree, some earlier cleanup patches helped minimize the change to the initialization of a temporary variable rather than every single member access. The generated qapi-visit.c code is also affected by the layout change: |@@ -7393,10 +7393,10 @@ void visit_type_ImageInfoSpecific_member | } | switch (obj->type) { | case IMAGE_INFO_SPECIFIC_KIND_QCOW2: |- visit_type_ImageInfoSpecificQCow2(v, "data", &obj->u.qcow2, &err); |+ visit_type_q_obj_ImageInfoSpecificQCow2_wrapper_members(v, &obj->u.qcow2, &err); | break; | case IMAGE_INFO_SPECIFIC_KIND_VMDK: |- visit_type_ImageInfoSpecificVmdk(v, "data", &obj->u.vmdk, &err); |+ visit_type_q_obj_ImageInfoSpecificVmdk_wrapper_members(v, &obj->u.vmdk, &err); | break; | default: | abort(); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1458254921-17042-13-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-03-18 01:48:37 +03:00
!opts->u.nic.data->has_netdev) {
peer = net_hub_add_port(net->has_vlan ? net->vlan : 0, NULL);
}
}
convert net_client_init() to OptsVisitor The net_client_init() prototype is kept intact. Based on "is_netdev", the QemuOpts-rooted QemuOpt-list is parsed as a Netdev or a NetLegacy. The original meat of net_client_init() is moved to and simplified in net_client_init1(): Fields not common between -net and -netdev are clearly separated. Getting the name for the init functions is cleaner: Netdev::id is mandatory, and all init functions handle a NULL NetLegacy::name. NetLegacy::vlan explicitly depends on -net (see below). Verifying the "type=" option for -netdev can be turned into a switch. Format validation with qemu_opts_validate() can be removed because the visitor covers it. Relatedly, the "net_client_types" array is reduced to an array of init functions that can be directly indexed by opts->kind. (Help text is available in the schema JSON.) The outermost negation in the condition around qemu_find_vlan() was flattened, because it expresses the dependent code's requirements more clearly. VLAN lookup is avoided if there's no init function to pass the VLAN to. Whenever the value of type=... is needed, we substitute NetClientOptionsKind_lookup[kind]. The individual init functions are not converted yet, thus the original QemuOpts instance is passed transparently. v1->v2: - NetLegacy::name is optional. Tracked it through all init functions: they all handle a NULL name. Updated commit message accordingly. v2->v3: - NetLegacy::id is allowed and takes precedence over NetLegacy::name. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-17 18:17:13 +04:00
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
if (net_client_init_fun[netdev->type](netdev, name, peer, errp) < 0) {
/* FIXME drop when all init functions store an Error */
if (errp && !*errp) {
error_setg(errp, QERR_DEVICE_INIT_FAILED,
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
NetClientDriver_lookup[netdev->type]);
}
return -1;
}
convert net_client_init() to OptsVisitor The net_client_init() prototype is kept intact. Based on "is_netdev", the QemuOpts-rooted QemuOpt-list is parsed as a Netdev or a NetLegacy. The original meat of net_client_init() is moved to and simplified in net_client_init1(): Fields not common between -net and -netdev are clearly separated. Getting the name for the init functions is cleaner: Netdev::id is mandatory, and all init functions handle a NULL NetLegacy::name. NetLegacy::vlan explicitly depends on -net (see below). Verifying the "type=" option for -netdev can be turned into a switch. Format validation with qemu_opts_validate() can be removed because the visitor covers it. Relatedly, the "net_client_types" array is reduced to an array of init functions that can be directly indexed by opts->kind. (Help text is available in the schema JSON.) The outermost negation in the condition around qemu_find_vlan() was flattened, because it expresses the dependent code's requirements more clearly. VLAN lookup is avoided if there's no init function to pass the VLAN to. Whenever the value of type=... is needed, we substitute NetClientOptionsKind_lookup[kind]. The individual init functions are not converted yet, thus the original QemuOpts instance is passed transparently. v1->v2: - NetLegacy::name is optional. Tracked it through all init functions: they all handle a NULL name. Updated commit message accordingly. v2->v3: - NetLegacy::id is allowed and takes precedence over NetLegacy::name. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-17 18:17:13 +04:00
return 0;
}
int net_client_init(QemuOpts *opts, bool is_netdev, Error **errp)
convert net_client_init() to OptsVisitor The net_client_init() prototype is kept intact. Based on "is_netdev", the QemuOpts-rooted QemuOpt-list is parsed as a Netdev or a NetLegacy. The original meat of net_client_init() is moved to and simplified in net_client_init1(): Fields not common between -net and -netdev are clearly separated. Getting the name for the init functions is cleaner: Netdev::id is mandatory, and all init functions handle a NULL NetLegacy::name. NetLegacy::vlan explicitly depends on -net (see below). Verifying the "type=" option for -netdev can be turned into a switch. Format validation with qemu_opts_validate() can be removed because the visitor covers it. Relatedly, the "net_client_types" array is reduced to an array of init functions that can be directly indexed by opts->kind. (Help text is available in the schema JSON.) The outermost negation in the condition around qemu_find_vlan() was flattened, because it expresses the dependent code's requirements more clearly. VLAN lookup is avoided if there's no init function to pass the VLAN to. Whenever the value of type=... is needed, we substitute NetClientOptionsKind_lookup[kind]. The individual init functions are not converted yet, thus the original QemuOpts instance is passed transparently. v1->v2: - NetLegacy::name is optional. Tracked it through all init functions: they all handle a NULL name. Updated commit message accordingly. v2->v3: - NetLegacy::id is allowed and takes precedence over NetLegacy::name. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-17 18:17:13 +04:00
{
void *object = NULL;
Error *err = NULL;
int ret = -1;
Visitor *v = opts_visitor_new(opts);
{
/* Parse convenience option format ip6-net=fec0::0[/64] */
const char *ip6_net = qemu_opt_get(opts, "ipv6-net");
if (ip6_net) {
char buf[strlen(ip6_net) + 1];
if (get_str_sep(buf, sizeof(buf), &ip6_net, '/') < 0) {
/* Default 64bit prefix length. */
qemu_opt_set(opts, "ipv6-prefix", ip6_net, &error_abort);
qemu_opt_set_number(opts, "ipv6-prefixlen", 64, &error_abort);
} else {
/* User-specified prefix length. */
unsigned long len;
int err;
qemu_opt_set(opts, "ipv6-prefix", buf, &error_abort);
err = qemu_strtoul(ip6_net, NULL, 10, &len);
if (err) {
error_setg(errp, QERR_INVALID_PARAMETER_VALUE,
"ipv6-prefix", "a number");
} else {
qemu_opt_set_number(opts, "ipv6-prefixlen", len,
&error_abort);
}
}
qemu_opt_unset(opts, "ipv6-net");
}
}
if (is_netdev) {
visit_type_Netdev(v, NULL, (Netdev **)&object, &err);
} else {
visit_type_NetLegacy(v, NULL, (NetLegacy **)&object, &err);
}
convert net_client_init() to OptsVisitor The net_client_init() prototype is kept intact. Based on "is_netdev", the QemuOpts-rooted QemuOpt-list is parsed as a Netdev or a NetLegacy. The original meat of net_client_init() is moved to and simplified in net_client_init1(): Fields not common between -net and -netdev are clearly separated. Getting the name for the init functions is cleaner: Netdev::id is mandatory, and all init functions handle a NULL NetLegacy::name. NetLegacy::vlan explicitly depends on -net (see below). Verifying the "type=" option for -netdev can be turned into a switch. Format validation with qemu_opts_validate() can be removed because the visitor covers it. Relatedly, the "net_client_types" array is reduced to an array of init functions that can be directly indexed by opts->kind. (Help text is available in the schema JSON.) The outermost negation in the condition around qemu_find_vlan() was flattened, because it expresses the dependent code's requirements more clearly. VLAN lookup is avoided if there's no init function to pass the VLAN to. Whenever the value of type=... is needed, we substitute NetClientOptionsKind_lookup[kind]. The individual init functions are not converted yet, thus the original QemuOpts instance is passed transparently. v1->v2: - NetLegacy::name is optional. Tracked it through all init functions: they all handle a NULL name. Updated commit message accordingly. v2->v3: - NetLegacy::id is allowed and takes precedence over NetLegacy::name. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-17 18:17:13 +04:00
if (!err) {
ret = net_client_init1(object, is_netdev, &err);
convert net_client_init() to OptsVisitor The net_client_init() prototype is kept intact. Based on "is_netdev", the QemuOpts-rooted QemuOpt-list is parsed as a Netdev or a NetLegacy. The original meat of net_client_init() is moved to and simplified in net_client_init1(): Fields not common between -net and -netdev are clearly separated. Getting the name for the init functions is cleaner: Netdev::id is mandatory, and all init functions handle a NULL NetLegacy::name. NetLegacy::vlan explicitly depends on -net (see below). Verifying the "type=" option for -netdev can be turned into a switch. Format validation with qemu_opts_validate() can be removed because the visitor covers it. Relatedly, the "net_client_types" array is reduced to an array of init functions that can be directly indexed by opts->kind. (Help text is available in the schema JSON.) The outermost negation in the condition around qemu_find_vlan() was flattened, because it expresses the dependent code's requirements more clearly. VLAN lookup is avoided if there's no init function to pass the VLAN to. Whenever the value of type=... is needed, we substitute NetClientOptionsKind_lookup[kind]. The individual init functions are not converted yet, thus the original QemuOpts instance is passed transparently. v1->v2: - NetLegacy::name is optional. Tracked it through all init functions: they all handle a NULL name. Updated commit message accordingly. v2->v3: - NetLegacy::id is allowed and takes precedence over NetLegacy::name. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-17 18:17:13 +04:00
}
if (is_netdev) {
qapi_free_Netdev(object);
} else {
qapi_free_NetLegacy(object);
convert net_client_init() to OptsVisitor The net_client_init() prototype is kept intact. Based on "is_netdev", the QemuOpts-rooted QemuOpt-list is parsed as a Netdev or a NetLegacy. The original meat of net_client_init() is moved to and simplified in net_client_init1(): Fields not common between -net and -netdev are clearly separated. Getting the name for the init functions is cleaner: Netdev::id is mandatory, and all init functions handle a NULL NetLegacy::name. NetLegacy::vlan explicitly depends on -net (see below). Verifying the "type=" option for -netdev can be turned into a switch. Format validation with qemu_opts_validate() can be removed because the visitor covers it. Relatedly, the "net_client_types" array is reduced to an array of init functions that can be directly indexed by opts->kind. (Help text is available in the schema JSON.) The outermost negation in the condition around qemu_find_vlan() was flattened, because it expresses the dependent code's requirements more clearly. VLAN lookup is avoided if there's no init function to pass the VLAN to. Whenever the value of type=... is needed, we substitute NetClientOptionsKind_lookup[kind]. The individual init functions are not converted yet, thus the original QemuOpts instance is passed transparently. v1->v2: - NetLegacy::name is optional. Tracked it through all init functions: they all handle a NULL name. Updated commit message accordingly. v2->v3: - NetLegacy::id is allowed and takes precedence over NetLegacy::name. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-17 18:17:13 +04:00
}
error_propagate(errp, err);
visit_free(v);
convert net_client_init() to OptsVisitor The net_client_init() prototype is kept intact. Based on "is_netdev", the QemuOpts-rooted QemuOpt-list is parsed as a Netdev or a NetLegacy. The original meat of net_client_init() is moved to and simplified in net_client_init1(): Fields not common between -net and -netdev are clearly separated. Getting the name for the init functions is cleaner: Netdev::id is mandatory, and all init functions handle a NULL NetLegacy::name. NetLegacy::vlan explicitly depends on -net (see below). Verifying the "type=" option for -netdev can be turned into a switch. Format validation with qemu_opts_validate() can be removed because the visitor covers it. Relatedly, the "net_client_types" array is reduced to an array of init functions that can be directly indexed by opts->kind. (Help text is available in the schema JSON.) The outermost negation in the condition around qemu_find_vlan() was flattened, because it expresses the dependent code's requirements more clearly. VLAN lookup is avoided if there's no init function to pass the VLAN to. Whenever the value of type=... is needed, we substitute NetClientOptionsKind_lookup[kind]. The individual init functions are not converted yet, thus the original QemuOpts instance is passed transparently. v1->v2: - NetLegacy::name is optional. Tracked it through all init functions: they all handle a NULL name. Updated commit message accordingly. v2->v3: - NetLegacy::id is allowed and takes precedence over NetLegacy::name. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-17 18:17:13 +04:00
return ret;
}
convert net_client_init() to OptsVisitor The net_client_init() prototype is kept intact. Based on "is_netdev", the QemuOpts-rooted QemuOpt-list is parsed as a Netdev or a NetLegacy. The original meat of net_client_init() is moved to and simplified in net_client_init1(): Fields not common between -net and -netdev are clearly separated. Getting the name for the init functions is cleaner: Netdev::id is mandatory, and all init functions handle a NULL NetLegacy::name. NetLegacy::vlan explicitly depends on -net (see below). Verifying the "type=" option for -netdev can be turned into a switch. Format validation with qemu_opts_validate() can be removed because the visitor covers it. Relatedly, the "net_client_types" array is reduced to an array of init functions that can be directly indexed by opts->kind. (Help text is available in the schema JSON.) The outermost negation in the condition around qemu_find_vlan() was flattened, because it expresses the dependent code's requirements more clearly. VLAN lookup is avoided if there's no init function to pass the VLAN to. Whenever the value of type=... is needed, we substitute NetClientOptionsKind_lookup[kind]. The individual init functions are not converted yet, thus the original QemuOpts instance is passed transparently. v1->v2: - NetLegacy::name is optional. Tracked it through all init functions: they all handle a NULL name. Updated commit message accordingly. v2->v3: - NetLegacy::id is allowed and takes precedence over NetLegacy::name. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-17 18:17:13 +04:00
static int net_host_check_device(const char *device)
{
int i;
for (i = 0; host_net_devices[i]; i++) {
if (!strncmp(host_net_devices[i], device,
strlen(host_net_devices[i]))) {
return 1;
}
}
return 0;
}
void hmp_host_net_add(Monitor *mon, const QDict *qdict)
{
const char *device = qdict_get_str(qdict, "device");
const char *opts_str = qdict_get_try_str(qdict, "opts");
Error *local_err = NULL;
QemuOpts *opts;
if (!net_host_check_device(device)) {
monitor_printf(mon, "invalid host network device %s\n", device);
return;
}
QemuOpts: Wean off qerror_report_err() qerror_report_err() is a transitional interface to help with converting existing monitor commands to QMP. It should not be used elsewhere. The only remaining user in qemu-option.c is qemu_opts_parse(). Is it used in QMP context? If not, we can simply replace qerror_report_err() by error_report_err(). The uses in qemu-img.c, qemu-io.c, qemu-nbd.c and under tests/ are clearly not in QMP context. The uses in vl.c aren't either, because the only QMP command handlers there are qmp_query_status() and qmp_query_machines(), and they don't call it. Remaining uses: * drive_def(): Command line -drive and such, HMP drive_add and pci_add * hmp_chardev_add(): HMP chardev-add * monitor_parse_command(): HMP core * tmp_config_parse(): Command line -tpmdev * net_host_device_add(): HMP host_net_add * net_client_parse(): Command line -net and -netdev * qemu_global_option(): Command line -global * vnc_parse_func(): Command line -display, -vnc, default display, HMP change, QMP change. Bummer. * qemu_pci_hot_add_nic(): HMP pci_add * usb_net_init(): Command line -usbdevice, HMP usb_add Propagate errors through qemu_opts_parse(). Create a convenience function qemu_opts_parse_noisily() that passes errors to error_report_err(). Switch all non-QMP users outside tests to it. That leaves vnc_parse_func(). Propagate errors through it. Since I'm touching it anyway, rename it to vnc_parse(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-02-13 14:50:26 +03:00
opts = qemu_opts_parse_noisily(qemu_find_opts("net"),
opts_str ? opts_str : "", false);
if (!opts) {
return;
}
qemu_opt_set(opts, "type", device, &error_abort);
net_client_init(opts, false, &local_err);
if (local_err) {
error_report_err(local_err);
monitor_printf(mon, "adding host network device %s failed\n", device);
}
}
void hmp_host_net_remove(Monitor *mon, const QDict *qdict)
{
NetClientState *nc;
int vlan_id = qdict_get_int(qdict, "vlan_id");
const char *device = qdict_get_str(qdict, "device");
nc = net_hub_find_client_by_name(vlan_id, device);
if (!nc) {
error_report("Host network device '%s' on hub '%d' not found",
device, vlan_id);
return;
}
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
if (nc->info->type == NET_CLIENT_DRIVER_NIC) {
error_report("invalid host network device '%s'", device);
return;
}
qemu_del_net_client(nc->peer);
qemu_del_net_client(nc);
qemu_opts_del(qemu_opts_find(qemu_find_opts("net"), device));
}
void netdev_add(QemuOpts *opts, Error **errp)
{
net_client_init(opts, true, errp);
}
qmp: Wean off qerror_report() The traditional QMP command handler interface int qmp_FOO(Monitor *mon, const QDict *params, QObject **ret_data); doesn't provide for returning an Error object. Instead, the handler is expected to stash it in the monitor with qerror_report(). When we rebased QMP on top of QAPI, we didn't change this interface. Instead, commit 776574d introduced "middle mode" as a temporary aid for converting existing QMP commands to QAPI one by one. More than three years later, we're still using it. Middle mode has two effects: * Instead of the native input marshallers static void qmp_marshal_input_FOO(QDict *, QObject **, Error **) it generates input marshallers conforming to the traditional QMP command handler interface. * It suppresses generation of code to register them with qmp_register_command() This permits giving them internal linkage. As long as we need qmp-commands.hx, we can't use the registry behind qmp_register_command(), so the latter has to stay for now. The former has to go to get rid of qerror_report(). Changing all QMP commands to fit the QAPI mold in one go was impractical back when we started, but by now there are just a few stragglers left: do_qmp_capabilities(), qmp_qom_set(), qmp_qom_get(), qmp_object_add(), qmp_netdev_add(), do_device_add(). Switch middle mode to generate native input marshallers, and adapt the stragglers. Simplifies both the monitor code and the stragglers. Rename do_qmp_capabilities() to qmp_capabilities(), and do_device_add() to qmp_device_add, because that's how QMP command handlers are named today. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-03-13 19:25:50 +03:00
void qmp_netdev_add(QDict *qdict, QObject **ret, Error **errp)
{
Error *local_err = NULL;
QemuOptsList *opts_list;
QemuOpts *opts;
opts_list = qemu_find_opts_err("netdev", &local_err);
if (local_err) {
qmp: Wean off qerror_report() The traditional QMP command handler interface int qmp_FOO(Monitor *mon, const QDict *params, QObject **ret_data); doesn't provide for returning an Error object. Instead, the handler is expected to stash it in the monitor with qerror_report(). When we rebased QMP on top of QAPI, we didn't change this interface. Instead, commit 776574d introduced "middle mode" as a temporary aid for converting existing QMP commands to QAPI one by one. More than three years later, we're still using it. Middle mode has two effects: * Instead of the native input marshallers static void qmp_marshal_input_FOO(QDict *, QObject **, Error **) it generates input marshallers conforming to the traditional QMP command handler interface. * It suppresses generation of code to register them with qmp_register_command() This permits giving them internal linkage. As long as we need qmp-commands.hx, we can't use the registry behind qmp_register_command(), so the latter has to stay for now. The former has to go to get rid of qerror_report(). Changing all QMP commands to fit the QAPI mold in one go was impractical back when we started, but by now there are just a few stragglers left: do_qmp_capabilities(), qmp_qom_set(), qmp_qom_get(), qmp_object_add(), qmp_netdev_add(), do_device_add(). Switch middle mode to generate native input marshallers, and adapt the stragglers. Simplifies both the monitor code and the stragglers. Rename do_qmp_capabilities() to qmp_capabilities(), and do_device_add() to qmp_device_add, because that's how QMP command handlers are named today. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-03-13 19:25:50 +03:00
goto out;
}
opts = qemu_opts_from_qdict(opts_list, qdict, &local_err);
if (local_err) {
qmp: Wean off qerror_report() The traditional QMP command handler interface int qmp_FOO(Monitor *mon, const QDict *params, QObject **ret_data); doesn't provide for returning an Error object. Instead, the handler is expected to stash it in the monitor with qerror_report(). When we rebased QMP on top of QAPI, we didn't change this interface. Instead, commit 776574d introduced "middle mode" as a temporary aid for converting existing QMP commands to QAPI one by one. More than three years later, we're still using it. Middle mode has two effects: * Instead of the native input marshallers static void qmp_marshal_input_FOO(QDict *, QObject **, Error **) it generates input marshallers conforming to the traditional QMP command handler interface. * It suppresses generation of code to register them with qmp_register_command() This permits giving them internal linkage. As long as we need qmp-commands.hx, we can't use the registry behind qmp_register_command(), so the latter has to stay for now. The former has to go to get rid of qerror_report(). Changing all QMP commands to fit the QAPI mold in one go was impractical back when we started, but by now there are just a few stragglers left: do_qmp_capabilities(), qmp_qom_set(), qmp_qom_get(), qmp_object_add(), qmp_netdev_add(), do_device_add(). Switch middle mode to generate native input marshallers, and adapt the stragglers. Simplifies both the monitor code and the stragglers. Rename do_qmp_capabilities() to qmp_capabilities(), and do_device_add() to qmp_device_add, because that's how QMP command handlers are named today. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-03-13 19:25:50 +03:00
goto out;
}
netdev_add(opts, &local_err);
if (local_err) {
qemu_opts_del(opts);
qmp: Wean off qerror_report() The traditional QMP command handler interface int qmp_FOO(Monitor *mon, const QDict *params, QObject **ret_data); doesn't provide for returning an Error object. Instead, the handler is expected to stash it in the monitor with qerror_report(). When we rebased QMP on top of QAPI, we didn't change this interface. Instead, commit 776574d introduced "middle mode" as a temporary aid for converting existing QMP commands to QAPI one by one. More than three years later, we're still using it. Middle mode has two effects: * Instead of the native input marshallers static void qmp_marshal_input_FOO(QDict *, QObject **, Error **) it generates input marshallers conforming to the traditional QMP command handler interface. * It suppresses generation of code to register them with qmp_register_command() This permits giving them internal linkage. As long as we need qmp-commands.hx, we can't use the registry behind qmp_register_command(), so the latter has to stay for now. The former has to go to get rid of qerror_report(). Changing all QMP commands to fit the QAPI mold in one go was impractical back when we started, but by now there are just a few stragglers left: do_qmp_capabilities(), qmp_qom_set(), qmp_qom_get(), qmp_object_add(), qmp_netdev_add(), do_device_add(). Switch middle mode to generate native input marshallers, and adapt the stragglers. Simplifies both the monitor code and the stragglers. Rename do_qmp_capabilities() to qmp_capabilities(), and do_device_add() to qmp_device_add, because that's how QMP command handlers are named today. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-03-13 19:25:50 +03:00
goto out;
}
qmp: Wean off qerror_report() The traditional QMP command handler interface int qmp_FOO(Monitor *mon, const QDict *params, QObject **ret_data); doesn't provide for returning an Error object. Instead, the handler is expected to stash it in the monitor with qerror_report(). When we rebased QMP on top of QAPI, we didn't change this interface. Instead, commit 776574d introduced "middle mode" as a temporary aid for converting existing QMP commands to QAPI one by one. More than three years later, we're still using it. Middle mode has two effects: * Instead of the native input marshallers static void qmp_marshal_input_FOO(QDict *, QObject **, Error **) it generates input marshallers conforming to the traditional QMP command handler interface. * It suppresses generation of code to register them with qmp_register_command() This permits giving them internal linkage. As long as we need qmp-commands.hx, we can't use the registry behind qmp_register_command(), so the latter has to stay for now. The former has to go to get rid of qerror_report(). Changing all QMP commands to fit the QAPI mold in one go was impractical back when we started, but by now there are just a few stragglers left: do_qmp_capabilities(), qmp_qom_set(), qmp_qom_get(), qmp_object_add(), qmp_netdev_add(), do_device_add(). Switch middle mode to generate native input marshallers, and adapt the stragglers. Simplifies both the monitor code and the stragglers. Rename do_qmp_capabilities() to qmp_capabilities(), and do_device_add() to qmp_device_add, because that's how QMP command handlers are named today. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-03-13 19:25:50 +03:00
out:
error_propagate(errp, local_err);
}
void qmp_netdev_del(const char *id, Error **errp)
{
NetClientState *nc;
QemuOpts *opts;
nc = qemu_find_netdev(id);
if (!nc) {
error_set(errp, ERROR_CLASS_DEVICE_NOT_FOUND,
"Device '%s' not found", id);
return;
}
opts = qemu_opts_find(qemu_find_opts_err("netdev", NULL), id);
if (!opts) {
error_setg(errp, "Device '%s' is not a netdev", id);
return;
}
qemu_del_net_client(nc);
qemu_opts_del(opts);
}
static void netfilter_print_info(Monitor *mon, NetFilterState *nf)
{
char *str;
ObjectProperty *prop;
ObjectPropertyIterator iter;
qapi: Add new visit_complete() function Making each output visitor provide its own output collection function was the only remaining reason for exposing visitor sub-types to the rest of the code base. Add a polymorphic visit_complete() function which is a no-op for input visitors, and which populates an opaque pointer for output visitors. For maximum type-safety, also add a parameter to the output visitor constructors with a type-correct version of the output pointer, and assert that the two uses match. This approach was considered superior to either passing the output parameter only during construction (action at a distance during visit_free() feels awkward) or only during visit_complete() (defeating type safety makes it easier to use incorrectly). Most callers were function-local, and therefore a mechanical conversion; the testsuite was a bit trickier, but the previous cleanup patch minimized the churn here. The visit_complete() function may be called at most once; doing so lets us use transfer semantics rather than duplication or ref-count semantics to get the just-built output back to the caller, even though it means our behavior is not idempotent. Generated code is simplified as follows for events: |@@ -26,7 +26,7 @@ void qapi_event_send_acpi_device_ost(ACP | QDict *qmp; | Error *err = NULL; | QMPEventFuncEmit emit; |- QmpOutputVisitor *qov; |+ QObject *obj; | Visitor *v; | q_obj_ACPI_DEVICE_OST_arg param = { | info |@@ -39,8 +39,7 @@ void qapi_event_send_acpi_device_ost(ACP | | qmp = qmp_event_build_dict("ACPI_DEVICE_OST"); | |- qov = qmp_output_visitor_new(); |- v = qmp_output_get_visitor(qov); |+ v = qmp_output_visitor_new(&obj); | | visit_start_struct(v, "ACPI_DEVICE_OST", NULL, 0, &err); | if (err) { |@@ -55,7 +54,8 @@ void qapi_event_send_acpi_device_ost(ACP | goto out; | } | |- qdict_put_obj(qmp, "data", qmp_output_get_qobject(qov)); |+ visit_complete(v, &obj); |+ qdict_put_obj(qmp, "data", obj); | emit(QAPI_EVENT_ACPI_DEVICE_OST, qmp, &err); and for commands: | { | Error *err = NULL; |- QmpOutputVisitor *qov = qmp_output_visitor_new(); | Visitor *v; | |- v = qmp_output_get_visitor(qov); |+ v = qmp_output_visitor_new(ret_out); | visit_type_AddfdInfo(v, "unused", &ret_in, &err); |- if (err) { |- goto out; |+ if (!err) { |+ visit_complete(v, ret_out); | } |- *ret_out = qmp_output_get_qobject(qov); |- |-out: | error_propagate(errp, err); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-09 19:48:43 +03:00
Visitor *v;
/* generate info str */
object_property_iter_init(&iter, OBJECT(nf));
while ((prop = object_property_iter_next(&iter))) {
if (!strcmp(prop->name, "type")) {
continue;
}
qapi: Add new visit_complete() function Making each output visitor provide its own output collection function was the only remaining reason for exposing visitor sub-types to the rest of the code base. Add a polymorphic visit_complete() function which is a no-op for input visitors, and which populates an opaque pointer for output visitors. For maximum type-safety, also add a parameter to the output visitor constructors with a type-correct version of the output pointer, and assert that the two uses match. This approach was considered superior to either passing the output parameter only during construction (action at a distance during visit_free() feels awkward) or only during visit_complete() (defeating type safety makes it easier to use incorrectly). Most callers were function-local, and therefore a mechanical conversion; the testsuite was a bit trickier, but the previous cleanup patch minimized the churn here. The visit_complete() function may be called at most once; doing so lets us use transfer semantics rather than duplication or ref-count semantics to get the just-built output back to the caller, even though it means our behavior is not idempotent. Generated code is simplified as follows for events: |@@ -26,7 +26,7 @@ void qapi_event_send_acpi_device_ost(ACP | QDict *qmp; | Error *err = NULL; | QMPEventFuncEmit emit; |- QmpOutputVisitor *qov; |+ QObject *obj; | Visitor *v; | q_obj_ACPI_DEVICE_OST_arg param = { | info |@@ -39,8 +39,7 @@ void qapi_event_send_acpi_device_ost(ACP | | qmp = qmp_event_build_dict("ACPI_DEVICE_OST"); | |- qov = qmp_output_visitor_new(); |- v = qmp_output_get_visitor(qov); |+ v = qmp_output_visitor_new(&obj); | | visit_start_struct(v, "ACPI_DEVICE_OST", NULL, 0, &err); | if (err) { |@@ -55,7 +54,8 @@ void qapi_event_send_acpi_device_ost(ACP | goto out; | } | |- qdict_put_obj(qmp, "data", qmp_output_get_qobject(qov)); |+ visit_complete(v, &obj); |+ qdict_put_obj(qmp, "data", obj); | emit(QAPI_EVENT_ACPI_DEVICE_OST, qmp, &err); and for commands: | { | Error *err = NULL; |- QmpOutputVisitor *qov = qmp_output_visitor_new(); | Visitor *v; | |- v = qmp_output_get_visitor(qov); |+ v = qmp_output_visitor_new(ret_out); | visit_type_AddfdInfo(v, "unused", &ret_in, &err); |- if (err) { |- goto out; |+ if (!err) { |+ visit_complete(v, ret_out); | } |- *ret_out = qmp_output_get_qobject(qov); |- |-out: | error_propagate(errp, err); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-09 19:48:43 +03:00
v = string_output_visitor_new(false, &str);
object_property_get(OBJECT(nf), v, prop->name, NULL);
visit_complete(v, &str);
visit_free(v);
monitor_printf(mon, ",%s=%s", prop->name, str);
g_free(str);
}
monitor_printf(mon, "\n");
}
void print_net_client(Monitor *mon, NetClientState *nc)
{
NetFilterState *nf;
monitor_printf(mon, "%s: index=%d,type=%s,%s\n", nc->name,
nc->queue_index,
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
NetClientDriver_lookup[nc->info->type],
nc->info_str);
if (!QTAILQ_EMPTY(&nc->filters)) {
monitor_printf(mon, "filters:\n");
}
QTAILQ_FOREACH(nf, &nc->filters, next) {
char *path = object_get_canonical_path_component(OBJECT(nf));
monitor_printf(mon, " - %s: type=%s", path,
object_get_typename(OBJECT(nf)));
netfilter_print_info(mon, nf);
g_free(path);
}
}
net: add support of mac-programming over macvtap in QEMU side Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-14 11:45:52 +04:00
RxFilterInfoList *qmp_query_rx_filter(bool has_name, const char *name,
Error **errp)
{
NetClientState *nc;
RxFilterInfoList *filter_list = NULL, *last_entry = NULL;
QTAILQ_FOREACH(nc, &net_clients, next) {
RxFilterInfoList *entry;
RxFilterInfo *info;
if (has_name && strcmp(nc->name, name) != 0) {
continue;
}
/* only query rx-filter information of NIC */
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
if (nc->info->type != NET_CLIENT_DRIVER_NIC) {
net: add support of mac-programming over macvtap in QEMU side Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-14 11:45:52 +04:00
if (has_name) {
error_setg(errp, "net client(%s) isn't a NIC", name);
return NULL;
net: add support of mac-programming over macvtap in QEMU side Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-14 11:45:52 +04:00
}
continue;
}
/* only query information on queue 0 since the info is per nic,
* not per queue
*/
if (nc->queue_index != 0)
continue;
net: add support of mac-programming over macvtap in QEMU side Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-14 11:45:52 +04:00
if (nc->info->query_rx_filter) {
info = nc->info->query_rx_filter(nc);
entry = g_malloc0(sizeof(*entry));
entry->value = info;
if (!filter_list) {
filter_list = entry;
} else {
last_entry->next = entry;
}
last_entry = entry;
} else if (has_name) {
error_setg(errp, "net client(%s) doesn't support"
" rx-filter querying", name);
return NULL;
net: add support of mac-programming over macvtap in QEMU side Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-14 11:45:52 +04:00
}
if (has_name) {
break;
}
net: add support of mac-programming over macvtap in QEMU side Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-14 11:45:52 +04:00
}
if (filter_list == NULL && has_name) {
net: add support of mac-programming over macvtap in QEMU side Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-14 11:45:52 +04:00
error_setg(errp, "invalid net client name: %s", name);
}
return filter_list;
}
void hmp_info_network(Monitor *mon, const QDict *qdict)
{
NetClientState *nc, *peer;
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
NetClientDriver type;
net_hub_info(mon);
QTAILQ_FOREACH(nc, &net_clients, next) {
peer = nc->peer;
type = nc->info->type;
/* Skip if already printed in hub info */
if (net_hub_id_for_client(nc, NULL) == 0) {
continue;
}
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
if (!peer || type == NET_CLIENT_DRIVER_NIC) {
print_net_client(mon, nc);
} /* else it's a netdev connected to a NIC, printed with the NIC */
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
if (peer && type == NET_CLIENT_DRIVER_NIC) {
monitor_printf(mon, " \\ ");
print_net_client(mon, peer);
}
}
}
void qmp_set_link(const char *name, bool up, Error **errp)
{
NetClientState *ncs[MAX_QUEUE_NUM];
NetClientState *nc;
int queues, i;
queues = qemu_find_net_clients_except(name, ncs,
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
NET_CLIENT_DRIVER__MAX,
MAX_QUEUE_NUM);
if (queues == 0) {
error_set(errp, ERROR_CLASS_DEVICE_NOT_FOUND,
"Device '%s' not found", name);
return;
}
nc = ncs[0];
for (i = 0; i < queues; i++) {
ncs[i]->link_down = !up;
}
if (nc->info->link_status_changed) {
nc->info->link_status_changed(nc);
}
if (nc->peer) {
/* Change peer link only if the peer is NIC and then notify peer.
* If the peer is a HUBPORT or a backend, we do not change the
* link status.
*
* This behavior is compatible with qemu vlans where there could be
* multiple clients that can still communicate with each other in
* disconnected mode. For now maintain this compatibility.
*/
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
if (nc->peer->info->type == NET_CLIENT_DRIVER_NIC) {
for (i = 0; i < queues; i++) {
ncs[i]->peer->link_down = !up;
}
}
if (nc->peer->info->link_status_changed) {
nc->peer->info->link_status_changed(nc->peer);
}
}
}
static void net_vm_change_state_handler(void *opaque, int running,
RunState state)
{
NetClientState *nc;
NetClientState *tmp;
QTAILQ_FOREACH_SAFE(nc, &net_clients, next, tmp) {
if (running) {
/* Flush queued packets and wake up backends. */
if (nc->peer && qemu_can_send_packet(nc)) {
qemu_flush_queued_packets(nc->peer);
}
} else {
/* Complete all queued packets, to guarantee we don't modify
* state later when VM is not running.
*/
qemu_flush_or_purge_queued_packets(nc, true);
}
}
}
void net_cleanup(void)
{
NetClientState *nc;
/* We may del multiple entries during qemu_del_net_client(),
* so QTAILQ_FOREACH_SAFE() is also not safe here.
*/
while (!QTAILQ_EMPTY(&net_clients)) {
nc = QTAILQ_FIRST(&net_clients);
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
if (nc->info->type == NET_CLIENT_DRIVER_NIC) {
qemu_del_nic(qemu_get_nic(nc));
} else {
qemu_del_net_client(nc);
}
}
qemu_del_vm_change_state_handler(net_change_state_entry);
}
void net_check_clients(void)
{
NetClientState *nc;
int i;
net_hub_check_clients();
QTAILQ_FOREACH(nc, &net_clients, next) {
if (!nc->peer) {
fprintf(stderr, "Warning: %s %s has no peer\n",
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 06:50:23 +03:00
nc->info->type == NET_CLIENT_DRIVER_NIC ?
"nic" : "netdev", nc->name);
}
}
/* Check that all NICs requested via -net nic actually got created.
* NICs created via -device don't need to be checked here because
* they are always instantiated.
*/
for (i = 0; i < MAX_NICS; i++) {
NICInfo *nd = &nd_table[i];
if (nd->used && !nd->instantiated) {
fprintf(stderr, "Warning: requested NIC (%s, model %s) "
"was not created (not supported by this machine?)\n",
nd->name ? nd->name : "anonymous",
nd->model ? nd->model : "unspecified");
}
}
}
static int net_init_client(void *dummy, QemuOpts *opts, Error **errp)
{
Error *local_err = NULL;
net_client_init(opts, false, &local_err);
if (local_err) {
error_report_err(local_err);
return -1;
}
return 0;
}
static int net_init_netdev(void *dummy, QemuOpts *opts, Error **errp)
{
Error *local_err = NULL;
int ret;
ret = net_client_init(opts, true, &local_err);
if (local_err) {
error_report_err(local_err);
return -1;
}
return ret;
}
int net_init_clients(void)
{
QemuOptsList *net = qemu_find_opts("net");
net_change_state_entry =
qemu_add_vm_change_state_handler(net_vm_change_state_handler, NULL);
QTAILQ_INIT(&net_clients);
if (qemu_opts_foreach(qemu_find_opts("netdev"),
net_init_netdev, NULL, NULL)) {
return -1;
}
if (qemu_opts_foreach(net, net_init_client, NULL, NULL)) {
return -1;
}
return 0;
}
int net_client_parse(QemuOptsList *opts_list, const char *optarg)
{
#if defined(CONFIG_SLIRP)
int ret;
if (net_slirp_parse_legacy(opts_list, optarg, &ret)) {
return ret;
}
#endif
QemuOpts: Wean off qerror_report_err() qerror_report_err() is a transitional interface to help with converting existing monitor commands to QMP. It should not be used elsewhere. The only remaining user in qemu-option.c is qemu_opts_parse(). Is it used in QMP context? If not, we can simply replace qerror_report_err() by error_report_err(). The uses in qemu-img.c, qemu-io.c, qemu-nbd.c and under tests/ are clearly not in QMP context. The uses in vl.c aren't either, because the only QMP command handlers there are qmp_query_status() and qmp_query_machines(), and they don't call it. Remaining uses: * drive_def(): Command line -drive and such, HMP drive_add and pci_add * hmp_chardev_add(): HMP chardev-add * monitor_parse_command(): HMP core * tmp_config_parse(): Command line -tpmdev * net_host_device_add(): HMP host_net_add * net_client_parse(): Command line -net and -netdev * qemu_global_option(): Command line -global * vnc_parse_func(): Command line -display, -vnc, default display, HMP change, QMP change. Bummer. * qemu_pci_hot_add_nic(): HMP pci_add * usb_net_init(): Command line -usbdevice, HMP usb_add Propagate errors through qemu_opts_parse(). Create a convenience function qemu_opts_parse_noisily() that passes errors to error_report_err(). Switch all non-QMP users outside tests to it. That leaves vnc_parse_func(). Propagate errors through it. Since I'm touching it anyway, rename it to vnc_parse(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-02-13 14:50:26 +03:00
if (!qemu_opts_parse_noisily(opts_list, optarg, true)) {
return -1;
}
return 0;
}
/* From FreeBSD */
/* XXX: optimize */
unsigned compute_mcast_idx(const uint8_t *ep)
{
uint32_t crc;
int carry, i, j;
uint8_t b;
crc = 0xffffffff;
for (i = 0; i < 6; i++) {
b = *ep++;
for (j = 0; j < 8; j++) {
carry = ((crc & 0x80000000L) ? 1 : 0) ^ (b & 0x01);
crc <<= 1;
b >>= 1;
if (carry) {
crc = ((crc ^ POLYNOMIAL) | carry);
}
}
}
return crc >> 26;
}
QemuOptsList qemu_netdev_opts = {
.name = "netdev",
.implied_opt_name = "type",
.head = QTAILQ_HEAD_INITIALIZER(qemu_netdev_opts.head),
.desc = {
/*
* no elements => accept any params
* validation will happen later
*/
{ /* end of list */ }
},
};
QemuOptsList qemu_net_opts = {
.name = "net",
.implied_opt_name = "type",
.head = QTAILQ_HEAD_INITIALIZER(qemu_net_opts.head),
.desc = {
/*
* no elements => accept any params
* validation will happen later
*/
{ /* end of list */ }
},
};
void net_socket_rs_init(SocketReadState *rs,
SocketReadStateFinalize *finalize)
{
rs->state = 0;
rs->index = 0;
rs->packet_len = 0;
memset(rs->buf, 0, sizeof(rs->buf));
rs->finalize = finalize;
}
/*
* Returns
* 0: success
* -1: error occurs
*/
int net_fill_rstate(SocketReadState *rs, const uint8_t *buf, int size)
{
unsigned int l;
while (size > 0) {
/* reassemble a packet from the network */
switch (rs->state) { /* 0 = getting length, 1 = getting data */
case 0:
l = 4 - rs->index;
if (l > size) {
l = size;
}
memcpy(rs->buf + rs->index, buf, l);
buf += l;
size -= l;
rs->index += l;
if (rs->index == 4) {
/* got length */
rs->packet_len = ntohl(*(uint32_t *)rs->buf);
rs->index = 0;
rs->state = 1;
}
break;
case 1:
l = rs->packet_len - rs->index;
if (l > size) {
l = size;
}
if (rs->index + l <= sizeof(rs->buf)) {
memcpy(rs->buf + rs->index, buf, l);
} else {
fprintf(stderr, "serious error: oversized packet received,"
"connection terminated.\n");
rs->index = rs->state = 0;
return -1;
}
rs->index += l;
buf += l;
size -= l;
if (rs->index >= rs->packet_len) {
rs->index = 0;
rs->state = 0;
if (rs->finalize) {
rs->finalize(rs);
}
}
break;
}
}
assert(size == 0);
return 0;
}