qapi: add pylintrc
Using `pylint --generate-rcfile > pylintrc`, generate a skeleton
pylintrc file. Sections that are not presently relevant (by the end of
this series) are removed leaving just the empty section as a search
engine / documentation hint to future authors.
I am targeting pylint 2.6.0. In the future (and hopefully before 5.2 is
released), I aim to have gitlab CI running the specific targeted
versions of pylint, mypy, flake8, etc in a job.
2.5.x will work if you additionally pass --disable=bad-whitespace.
This warning was removed from 2.6.x, for lack of consistent support.
Right now, quite a few modules are ignored as they are known to fail as
of this commit. modules will be removed from the known-bad list
throughout this and following series as they are repaired.
Note: Normally, pylintrc would go in the folder above the module, but as
that folder is shared by many things, it is going inside the module
folder (for now). Due to a bug in pylint 2.5+, pylint does not
correctly recognize when it is being run from "inside" a package, and
must be run *outside* of the package.
Therefore, to run it, you must:
> pylint scripts/qapi/ --rcfile=scripts/qapi/pylintrc
Signed-off-by: John Snow <jsnow@redhat.com>
Tested-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20201009161558.107041-10-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-10-09 19:15:31 +03:00
|
|
|
[MASTER]
|
|
|
|
|
|
|
|
# Add files or directories matching the regex patterns to the ignore list.
|
|
|
|
# The regex matches against base names, not paths.
|
2020-10-09 19:15:36 +03:00
|
|
|
ignore-patterns=error.py,
|
qapi: add pylintrc
Using `pylint --generate-rcfile > pylintrc`, generate a skeleton
pylintrc file. Sections that are not presently relevant (by the end of
this series) are removed leaving just the empty section as a search
engine / documentation hint to future authors.
I am targeting pylint 2.6.0. In the future (and hopefully before 5.2 is
released), I aim to have gitlab CI running the specific targeted
versions of pylint, mypy, flake8, etc in a job.
2.5.x will work if you additionally pass --disable=bad-whitespace.
This warning was removed from 2.6.x, for lack of consistent support.
Right now, quite a few modules are ignored as they are known to fail as
of this commit. modules will be removed from the known-bad list
throughout this and following series as they are repaired.
Note: Normally, pylintrc would go in the folder above the module, but as
that folder is shared by many things, it is going inside the module
folder (for now). Due to a bug in pylint 2.5+, pylint does not
correctly recognize when it is being run from "inside" a package, and
must be run *outside* of the package.
Therefore, to run it, you must:
> pylint scripts/qapi/ --rcfile=scripts/qapi/pylintrc
Signed-off-by: John Snow <jsnow@redhat.com>
Tested-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20201009161558.107041-10-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-10-09 19:15:31 +03:00
|
|
|
expr.py,
|
|
|
|
parser.py,
|
|
|
|
schema.py,
|
|
|
|
|
|
|
|
|
|
|
|
[MESSAGES CONTROL]
|
|
|
|
|
|
|
|
# Disable the message, report, category or checker with the given id(s). You
|
|
|
|
# can either give multiple identifiers separated by comma (,) or put this
|
|
|
|
# option multiple times (only on the command line, not in the configuration
|
|
|
|
# file where it should appear only once). You can also use "--disable=all" to
|
|
|
|
# disable everything first and then reenable specific checks. For example, if
|
|
|
|
# you want to run only the similarities checker, you can use "--disable=all
|
|
|
|
# --enable=similarities". If you want to run only the classes checker, but have
|
|
|
|
# no Warning level messages displayed, use "--disable=all --enable=classes
|
|
|
|
# --disable=W".
|
|
|
|
disable=fixme,
|
|
|
|
missing-docstring,
|
|
|
|
too-many-arguments,
|
|
|
|
too-many-branches,
|
|
|
|
too-many-statements,
|
|
|
|
too-many-instance-attributes,
|
|
|
|
|
|
|
|
[REPORTS]
|
|
|
|
|
|
|
|
[REFACTORING]
|
|
|
|
|
|
|
|
[MISCELLANEOUS]
|
|
|
|
|
|
|
|
[LOGGING]
|
|
|
|
|
|
|
|
[BASIC]
|
|
|
|
|
|
|
|
# Good variable names which should always be accepted, separated by a comma.
|
|
|
|
good-names=i,
|
|
|
|
j,
|
|
|
|
k,
|
|
|
|
ex,
|
|
|
|
Run,
|
2020-10-09 19:15:53 +03:00
|
|
|
_,
|
|
|
|
fp, # fp = open(...)
|
|
|
|
fd, # fd = os.open(...)
|
qapi: add pylintrc
Using `pylint --generate-rcfile > pylintrc`, generate a skeleton
pylintrc file. Sections that are not presently relevant (by the end of
this series) are removed leaving just the empty section as a search
engine / documentation hint to future authors.
I am targeting pylint 2.6.0. In the future (and hopefully before 5.2 is
released), I aim to have gitlab CI running the specific targeted
versions of pylint, mypy, flake8, etc in a job.
2.5.x will work if you additionally pass --disable=bad-whitespace.
This warning was removed from 2.6.x, for lack of consistent support.
Right now, quite a few modules are ignored as they are known to fail as
of this commit. modules will be removed from the known-bad list
throughout this and following series as they are repaired.
Note: Normally, pylintrc would go in the folder above the module, but as
that folder is shared by many things, it is going inside the module
folder (for now). Due to a bug in pylint 2.5+, pylint does not
correctly recognize when it is being run from "inside" a package, and
must be run *outside* of the package.
Therefore, to run it, you must:
> pylint scripts/qapi/ --rcfile=scripts/qapi/pylintrc
Signed-off-by: John Snow <jsnow@redhat.com>
Tested-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20201009161558.107041-10-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-10-09 19:15:31 +03:00
|
|
|
|
|
|
|
[VARIABLES]
|
|
|
|
|
|
|
|
[STRING]
|
|
|
|
|
|
|
|
[SPELLING]
|
|
|
|
|
|
|
|
[FORMAT]
|
|
|
|
|
|
|
|
[SIMILARITIES]
|
|
|
|
|
|
|
|
# Ignore import statements themselves when computing similarities.
|
|
|
|
ignore-imports=yes
|
|
|
|
|
|
|
|
[TYPECHECK]
|
|
|
|
|
|
|
|
[CLASSES]
|
|
|
|
|
|
|
|
[IMPORTS]
|
|
|
|
|
|
|
|
[DESIGN]
|
|
|
|
|
|
|
|
[EXCEPTIONS]
|