qemu/hw/virtio/virtio-crypto.c

1292 lines
42 KiB
C
Raw Normal View History

/*
* Virtio crypto Support
*
* Copyright (c) 2016 HUAWEI TECHNOLOGIES CO., LTD.
*
* Authors:
* Gonglei <arei.gonglei@huawei.com>
*
* This work is licensed under the terms of the GNU GPL, version 2 or
* (at your option) any later version. See the COPYING file in the
* top-level directory.
*/
#include "qemu/osdep.h"
#include "qemu/iov.h"
#include "qemu/main-loop.h"
#include "qemu/module.h"
#include "qapi/error.h"
#include "qemu/error-report.h"
#include "hw/virtio/virtio.h"
#include "hw/virtio/virtio-crypto.h"
#include "hw/qdev-properties.h"
#include "hw/virtio/virtio-access.h"
#include "standard-headers/linux/virtio_ids.h"
#include "sysemu/cryptodev-vhost.h"
#define VIRTIO_CRYPTO_VM_VERSION 1
typedef struct VirtIOCryptoSessionReq {
VirtIODevice *vdev;
VirtQueue *vq;
VirtQueueElement *elem;
CryptoDevBackendSessionInfo info;
CryptoDevCompletionFunc cb;
} VirtIOCryptoSessionReq;
static void virtio_crypto_free_create_session_req(VirtIOCryptoSessionReq *sreq)
{
switch (sreq->info.op_code) {
case VIRTIO_CRYPTO_CIPHER_CREATE_SESSION:
g_free(sreq->info.u.sym_sess_info.cipher_key);
g_free(sreq->info.u.sym_sess_info.auth_key);
break;
case VIRTIO_CRYPTO_AKCIPHER_CREATE_SESSION:
g_free(sreq->info.u.asym_sess_info.key);
break;
case VIRTIO_CRYPTO_CIPHER_DESTROY_SESSION:
case VIRTIO_CRYPTO_HASH_DESTROY_SESSION:
case VIRTIO_CRYPTO_MAC_DESTROY_SESSION:
case VIRTIO_CRYPTO_AEAD_DESTROY_SESSION:
case VIRTIO_CRYPTO_AKCIPHER_DESTROY_SESSION:
break;
default:
error_report("Unknown opcode: %u", sreq->info.op_code);
}
g_free(sreq);
}
/*
* Transfer virtqueue index to crypto queue index.
* The control virtqueue is after the data virtqueues
* so the input value doesn't need to be adjusted
*/
static inline int virtio_crypto_vq2q(int queue_index)
{
return queue_index;
}
static int
virtio_crypto_cipher_session_helper(VirtIODevice *vdev,
CryptoDevBackendSymSessionInfo *info,
struct virtio_crypto_cipher_session_para *cipher_para,
struct iovec **iov, unsigned int *out_num)
{
VirtIOCrypto *vcrypto = VIRTIO_CRYPTO(vdev);
unsigned int num = *out_num;
info->cipher_alg = ldl_le_p(&cipher_para->algo);
info->key_len = ldl_le_p(&cipher_para->keylen);
info->direction = ldl_le_p(&cipher_para->op);
DPRINTF("cipher_alg=%" PRIu32 ", info->direction=%" PRIu32 "\n",
info->cipher_alg, info->direction);
if (info->key_len > vcrypto->conf.max_cipher_key_len) {
error_report("virtio-crypto length of cipher key is too big: %u",
info->key_len);
return -VIRTIO_CRYPTO_ERR;
}
/* Get cipher key */
if (info->key_len > 0) {
size_t s;
DPRINTF("keylen=%" PRIu32 "\n", info->key_len);
info->cipher_key = g_malloc(info->key_len);
s = iov_to_buf(*iov, num, 0, info->cipher_key, info->key_len);
if (unlikely(s != info->key_len)) {
virtio_error(vdev, "virtio-crypto cipher key incorrect");
return -EFAULT;
}
iov_discard_front(iov, &num, info->key_len);
*out_num = num;
}
return 0;
}
static int
virtio_crypto_create_sym_session(VirtIOCrypto *vcrypto,
struct virtio_crypto_sym_create_session_req *sess_req,
uint32_t queue_id,
uint32_t opcode,
struct iovec *iov, unsigned int out_num,
VirtIOCryptoSessionReq *sreq)
{
VirtIODevice *vdev = VIRTIO_DEVICE(vcrypto);
CryptoDevBackendSymSessionInfo *sym_info = &sreq->info.u.sym_sess_info;
int queue_index;
uint32_t op_type;
int ret;
op_type = ldl_le_p(&sess_req->op_type);
sreq->info.op_code = opcode;
sym_info = &sreq->info.u.sym_sess_info;
crypto: Introduce RSA algorithm There are two parts in this patch: 1, support akcipher service by cryptodev-builtin driver 2, virtio-crypto driver supports akcipher service In principle, we should separate this into two patches, to avoid compiling error, merge them into one. Then virtio-crypto gets request from guest side, and forwards the request to builtin driver to handle it. Test with a guest linux: 1, The self-test framework of crypto layer works fine in guest kernel 2, Test with Linux guest(with asym support), the following script test(note that pkey_XXX is supported only in a newer version of keyutils): - both public key & private key - create/close session - encrypt/decrypt/sign/verify basic driver operation - also test with kernel crypto layer(pkey add/query) All the cases work fine. Run script in guest: rm -rf *.der *.pem *.pfx modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m rm -rf /tmp/data dd if=/dev/random of=/tmp/data count=1 bs=20 openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org" openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s` echo "priv key id = "$PRIV_KEY_ID PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s` echo "pub key id = "$PUB_KEY_ID keyctl pkey_query $PRIV_KEY_ID 0 keyctl pkey_query $PUB_KEY_ID 0 echo "Enc with priv key..." keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv echo "Dec with pub key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Sign with priv key..." keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig echo "Verify with pub key..." keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 echo "Enc with pub key..." keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub echo "Dec with priv key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Verify with pub key..." keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: lei he <helei.sig11@bytedance.com Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20220611064243.24535-2-pizhenwei@bytedance.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-11 09:42:43 +03:00
sym_info->op_type = op_type;
if (op_type == VIRTIO_CRYPTO_SYM_OP_CIPHER) {
crypto: Introduce RSA algorithm There are two parts in this patch: 1, support akcipher service by cryptodev-builtin driver 2, virtio-crypto driver supports akcipher service In principle, we should separate this into two patches, to avoid compiling error, merge them into one. Then virtio-crypto gets request from guest side, and forwards the request to builtin driver to handle it. Test with a guest linux: 1, The self-test framework of crypto layer works fine in guest kernel 2, Test with Linux guest(with asym support), the following script test(note that pkey_XXX is supported only in a newer version of keyutils): - both public key & private key - create/close session - encrypt/decrypt/sign/verify basic driver operation - also test with kernel crypto layer(pkey add/query) All the cases work fine. Run script in guest: rm -rf *.der *.pem *.pfx modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m rm -rf /tmp/data dd if=/dev/random of=/tmp/data count=1 bs=20 openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org" openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s` echo "priv key id = "$PRIV_KEY_ID PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s` echo "pub key id = "$PUB_KEY_ID keyctl pkey_query $PRIV_KEY_ID 0 keyctl pkey_query $PUB_KEY_ID 0 echo "Enc with priv key..." keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv echo "Dec with pub key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Sign with priv key..." keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig echo "Verify with pub key..." keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 echo "Enc with pub key..." keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub echo "Dec with priv key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Verify with pub key..." keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: lei he <helei.sig11@bytedance.com Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20220611064243.24535-2-pizhenwei@bytedance.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-11 09:42:43 +03:00
ret = virtio_crypto_cipher_session_helper(vdev, sym_info,
&sess_req->u.cipher.para,
&iov, &out_num);
if (ret < 0) {
return ret;
}
} else if (op_type == VIRTIO_CRYPTO_SYM_OP_ALGORITHM_CHAINING) {
size_t s;
/* cipher part */
crypto: Introduce RSA algorithm There are two parts in this patch: 1, support akcipher service by cryptodev-builtin driver 2, virtio-crypto driver supports akcipher service In principle, we should separate this into two patches, to avoid compiling error, merge them into one. Then virtio-crypto gets request from guest side, and forwards the request to builtin driver to handle it. Test with a guest linux: 1, The self-test framework of crypto layer works fine in guest kernel 2, Test with Linux guest(with asym support), the following script test(note that pkey_XXX is supported only in a newer version of keyutils): - both public key & private key - create/close session - encrypt/decrypt/sign/verify basic driver operation - also test with kernel crypto layer(pkey add/query) All the cases work fine. Run script in guest: rm -rf *.der *.pem *.pfx modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m rm -rf /tmp/data dd if=/dev/random of=/tmp/data count=1 bs=20 openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org" openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s` echo "priv key id = "$PRIV_KEY_ID PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s` echo "pub key id = "$PUB_KEY_ID keyctl pkey_query $PRIV_KEY_ID 0 keyctl pkey_query $PUB_KEY_ID 0 echo "Enc with priv key..." keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv echo "Dec with pub key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Sign with priv key..." keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig echo "Verify with pub key..." keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 echo "Enc with pub key..." keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub echo "Dec with priv key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Verify with pub key..." keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: lei he <helei.sig11@bytedance.com Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20220611064243.24535-2-pizhenwei@bytedance.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-11 09:42:43 +03:00
ret = virtio_crypto_cipher_session_helper(vdev, sym_info,
&sess_req->u.chain.para.cipher_param,
&iov, &out_num);
if (ret < 0) {
return ret;
}
/* hash part */
crypto: Introduce RSA algorithm There are two parts in this patch: 1, support akcipher service by cryptodev-builtin driver 2, virtio-crypto driver supports akcipher service In principle, we should separate this into two patches, to avoid compiling error, merge them into one. Then virtio-crypto gets request from guest side, and forwards the request to builtin driver to handle it. Test with a guest linux: 1, The self-test framework of crypto layer works fine in guest kernel 2, Test with Linux guest(with asym support), the following script test(note that pkey_XXX is supported only in a newer version of keyutils): - both public key & private key - create/close session - encrypt/decrypt/sign/verify basic driver operation - also test with kernel crypto layer(pkey add/query) All the cases work fine. Run script in guest: rm -rf *.der *.pem *.pfx modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m rm -rf /tmp/data dd if=/dev/random of=/tmp/data count=1 bs=20 openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org" openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s` echo "priv key id = "$PRIV_KEY_ID PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s` echo "pub key id = "$PUB_KEY_ID keyctl pkey_query $PRIV_KEY_ID 0 keyctl pkey_query $PUB_KEY_ID 0 echo "Enc with priv key..." keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv echo "Dec with pub key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Sign with priv key..." keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig echo "Verify with pub key..." keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 echo "Enc with pub key..." keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub echo "Dec with priv key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Verify with pub key..." keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: lei he <helei.sig11@bytedance.com Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20220611064243.24535-2-pizhenwei@bytedance.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-11 09:42:43 +03:00
sym_info->alg_chain_order = ldl_le_p(
&sess_req->u.chain.para.alg_chain_order);
crypto: Introduce RSA algorithm There are two parts in this patch: 1, support akcipher service by cryptodev-builtin driver 2, virtio-crypto driver supports akcipher service In principle, we should separate this into two patches, to avoid compiling error, merge them into one. Then virtio-crypto gets request from guest side, and forwards the request to builtin driver to handle it. Test with a guest linux: 1, The self-test framework of crypto layer works fine in guest kernel 2, Test with Linux guest(with asym support), the following script test(note that pkey_XXX is supported only in a newer version of keyutils): - both public key & private key - create/close session - encrypt/decrypt/sign/verify basic driver operation - also test with kernel crypto layer(pkey add/query) All the cases work fine. Run script in guest: rm -rf *.der *.pem *.pfx modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m rm -rf /tmp/data dd if=/dev/random of=/tmp/data count=1 bs=20 openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org" openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s` echo "priv key id = "$PRIV_KEY_ID PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s` echo "pub key id = "$PUB_KEY_ID keyctl pkey_query $PRIV_KEY_ID 0 keyctl pkey_query $PUB_KEY_ID 0 echo "Enc with priv key..." keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv echo "Dec with pub key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Sign with priv key..." keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig echo "Verify with pub key..." keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 echo "Enc with pub key..." keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub echo "Dec with priv key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Verify with pub key..." keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: lei he <helei.sig11@bytedance.com Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20220611064243.24535-2-pizhenwei@bytedance.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-11 09:42:43 +03:00
sym_info->add_len = ldl_le_p(&sess_req->u.chain.para.aad_len);
sym_info->hash_mode = ldl_le_p(&sess_req->u.chain.para.hash_mode);
if (sym_info->hash_mode == VIRTIO_CRYPTO_SYM_HASH_MODE_AUTH) {
sym_info->hash_alg =
ldl_le_p(&sess_req->u.chain.para.u.mac_param.algo);
sym_info->auth_key_len = ldl_le_p(
&sess_req->u.chain.para.u.mac_param.auth_key_len);
crypto: Introduce RSA algorithm There are two parts in this patch: 1, support akcipher service by cryptodev-builtin driver 2, virtio-crypto driver supports akcipher service In principle, we should separate this into two patches, to avoid compiling error, merge them into one. Then virtio-crypto gets request from guest side, and forwards the request to builtin driver to handle it. Test with a guest linux: 1, The self-test framework of crypto layer works fine in guest kernel 2, Test with Linux guest(with asym support), the following script test(note that pkey_XXX is supported only in a newer version of keyutils): - both public key & private key - create/close session - encrypt/decrypt/sign/verify basic driver operation - also test with kernel crypto layer(pkey add/query) All the cases work fine. Run script in guest: rm -rf *.der *.pem *.pfx modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m rm -rf /tmp/data dd if=/dev/random of=/tmp/data count=1 bs=20 openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org" openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s` echo "priv key id = "$PRIV_KEY_ID PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s` echo "pub key id = "$PUB_KEY_ID keyctl pkey_query $PRIV_KEY_ID 0 keyctl pkey_query $PUB_KEY_ID 0 echo "Enc with priv key..." keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv echo "Dec with pub key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Sign with priv key..." keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig echo "Verify with pub key..." keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 echo "Enc with pub key..." keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub echo "Dec with priv key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Verify with pub key..." keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: lei he <helei.sig11@bytedance.com Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20220611064243.24535-2-pizhenwei@bytedance.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-11 09:42:43 +03:00
sym_info->hash_result_len = ldl_le_p(
&sess_req->u.chain.para.u.mac_param.hash_result_len);
crypto: Introduce RSA algorithm There are two parts in this patch: 1, support akcipher service by cryptodev-builtin driver 2, virtio-crypto driver supports akcipher service In principle, we should separate this into two patches, to avoid compiling error, merge them into one. Then virtio-crypto gets request from guest side, and forwards the request to builtin driver to handle it. Test with a guest linux: 1, The self-test framework of crypto layer works fine in guest kernel 2, Test with Linux guest(with asym support), the following script test(note that pkey_XXX is supported only in a newer version of keyutils): - both public key & private key - create/close session - encrypt/decrypt/sign/verify basic driver operation - also test with kernel crypto layer(pkey add/query) All the cases work fine. Run script in guest: rm -rf *.der *.pem *.pfx modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m rm -rf /tmp/data dd if=/dev/random of=/tmp/data count=1 bs=20 openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org" openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s` echo "priv key id = "$PRIV_KEY_ID PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s` echo "pub key id = "$PUB_KEY_ID keyctl pkey_query $PRIV_KEY_ID 0 keyctl pkey_query $PUB_KEY_ID 0 echo "Enc with priv key..." keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv echo "Dec with pub key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Sign with priv key..." keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig echo "Verify with pub key..." keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 echo "Enc with pub key..." keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub echo "Dec with priv key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Verify with pub key..." keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: lei he <helei.sig11@bytedance.com Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20220611064243.24535-2-pizhenwei@bytedance.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-11 09:42:43 +03:00
if (sym_info->auth_key_len > vcrypto->conf.max_auth_key_len) {
error_report("virtio-crypto length of auth key is too big: %u",
crypto: Introduce RSA algorithm There are two parts in this patch: 1, support akcipher service by cryptodev-builtin driver 2, virtio-crypto driver supports akcipher service In principle, we should separate this into two patches, to avoid compiling error, merge them into one. Then virtio-crypto gets request from guest side, and forwards the request to builtin driver to handle it. Test with a guest linux: 1, The self-test framework of crypto layer works fine in guest kernel 2, Test with Linux guest(with asym support), the following script test(note that pkey_XXX is supported only in a newer version of keyutils): - both public key & private key - create/close session - encrypt/decrypt/sign/verify basic driver operation - also test with kernel crypto layer(pkey add/query) All the cases work fine. Run script in guest: rm -rf *.der *.pem *.pfx modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m rm -rf /tmp/data dd if=/dev/random of=/tmp/data count=1 bs=20 openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org" openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s` echo "priv key id = "$PRIV_KEY_ID PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s` echo "pub key id = "$PUB_KEY_ID keyctl pkey_query $PRIV_KEY_ID 0 keyctl pkey_query $PUB_KEY_ID 0 echo "Enc with priv key..." keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv echo "Dec with pub key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Sign with priv key..." keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig echo "Verify with pub key..." keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 echo "Enc with pub key..." keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub echo "Dec with priv key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Verify with pub key..." keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: lei he <helei.sig11@bytedance.com Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20220611064243.24535-2-pizhenwei@bytedance.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-11 09:42:43 +03:00
sym_info->auth_key_len);
return -VIRTIO_CRYPTO_ERR;
}
/* get auth key */
crypto: Introduce RSA algorithm There are two parts in this patch: 1, support akcipher service by cryptodev-builtin driver 2, virtio-crypto driver supports akcipher service In principle, we should separate this into two patches, to avoid compiling error, merge them into one. Then virtio-crypto gets request from guest side, and forwards the request to builtin driver to handle it. Test with a guest linux: 1, The self-test framework of crypto layer works fine in guest kernel 2, Test with Linux guest(with asym support), the following script test(note that pkey_XXX is supported only in a newer version of keyutils): - both public key & private key - create/close session - encrypt/decrypt/sign/verify basic driver operation - also test with kernel crypto layer(pkey add/query) All the cases work fine. Run script in guest: rm -rf *.der *.pem *.pfx modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m rm -rf /tmp/data dd if=/dev/random of=/tmp/data count=1 bs=20 openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org" openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s` echo "priv key id = "$PRIV_KEY_ID PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s` echo "pub key id = "$PUB_KEY_ID keyctl pkey_query $PRIV_KEY_ID 0 keyctl pkey_query $PUB_KEY_ID 0 echo "Enc with priv key..." keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv echo "Dec with pub key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Sign with priv key..." keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig echo "Verify with pub key..." keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 echo "Enc with pub key..." keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub echo "Dec with priv key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Verify with pub key..." keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: lei he <helei.sig11@bytedance.com Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20220611064243.24535-2-pizhenwei@bytedance.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-11 09:42:43 +03:00
if (sym_info->auth_key_len > 0) {
sym_info->auth_key = g_malloc(sym_info->auth_key_len);
s = iov_to_buf(iov, out_num, 0, sym_info->auth_key,
sym_info->auth_key_len);
if (unlikely(s != sym_info->auth_key_len)) {
virtio_error(vdev,
"virtio-crypto authenticated key incorrect");
return -EFAULT;
}
crypto: Introduce RSA algorithm There are two parts in this patch: 1, support akcipher service by cryptodev-builtin driver 2, virtio-crypto driver supports akcipher service In principle, we should separate this into two patches, to avoid compiling error, merge them into one. Then virtio-crypto gets request from guest side, and forwards the request to builtin driver to handle it. Test with a guest linux: 1, The self-test framework of crypto layer works fine in guest kernel 2, Test with Linux guest(with asym support), the following script test(note that pkey_XXX is supported only in a newer version of keyutils): - both public key & private key - create/close session - encrypt/decrypt/sign/verify basic driver operation - also test with kernel crypto layer(pkey add/query) All the cases work fine. Run script in guest: rm -rf *.der *.pem *.pfx modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m rm -rf /tmp/data dd if=/dev/random of=/tmp/data count=1 bs=20 openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org" openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s` echo "priv key id = "$PRIV_KEY_ID PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s` echo "pub key id = "$PUB_KEY_ID keyctl pkey_query $PRIV_KEY_ID 0 keyctl pkey_query $PUB_KEY_ID 0 echo "Enc with priv key..." keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv echo "Dec with pub key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Sign with priv key..." keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig echo "Verify with pub key..." keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 echo "Enc with pub key..." keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub echo "Dec with priv key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Verify with pub key..." keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: lei he <helei.sig11@bytedance.com Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20220611064243.24535-2-pizhenwei@bytedance.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-11 09:42:43 +03:00
iov_discard_front(&iov, &out_num, sym_info->auth_key_len);
}
crypto: Introduce RSA algorithm There are two parts in this patch: 1, support akcipher service by cryptodev-builtin driver 2, virtio-crypto driver supports akcipher service In principle, we should separate this into two patches, to avoid compiling error, merge them into one. Then virtio-crypto gets request from guest side, and forwards the request to builtin driver to handle it. Test with a guest linux: 1, The self-test framework of crypto layer works fine in guest kernel 2, Test with Linux guest(with asym support), the following script test(note that pkey_XXX is supported only in a newer version of keyutils): - both public key & private key - create/close session - encrypt/decrypt/sign/verify basic driver operation - also test with kernel crypto layer(pkey add/query) All the cases work fine. Run script in guest: rm -rf *.der *.pem *.pfx modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m rm -rf /tmp/data dd if=/dev/random of=/tmp/data count=1 bs=20 openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org" openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s` echo "priv key id = "$PRIV_KEY_ID PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s` echo "pub key id = "$PUB_KEY_ID keyctl pkey_query $PRIV_KEY_ID 0 keyctl pkey_query $PUB_KEY_ID 0 echo "Enc with priv key..." keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv echo "Dec with pub key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Sign with priv key..." keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig echo "Verify with pub key..." keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 echo "Enc with pub key..." keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub echo "Dec with priv key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Verify with pub key..." keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: lei he <helei.sig11@bytedance.com Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20220611064243.24535-2-pizhenwei@bytedance.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-11 09:42:43 +03:00
} else if (sym_info->hash_mode == VIRTIO_CRYPTO_SYM_HASH_MODE_PLAIN) {
sym_info->hash_alg = ldl_le_p(
&sess_req->u.chain.para.u.hash_param.algo);
crypto: Introduce RSA algorithm There are two parts in this patch: 1, support akcipher service by cryptodev-builtin driver 2, virtio-crypto driver supports akcipher service In principle, we should separate this into two patches, to avoid compiling error, merge them into one. Then virtio-crypto gets request from guest side, and forwards the request to builtin driver to handle it. Test with a guest linux: 1, The self-test framework of crypto layer works fine in guest kernel 2, Test with Linux guest(with asym support), the following script test(note that pkey_XXX is supported only in a newer version of keyutils): - both public key & private key - create/close session - encrypt/decrypt/sign/verify basic driver operation - also test with kernel crypto layer(pkey add/query) All the cases work fine. Run script in guest: rm -rf *.der *.pem *.pfx modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m rm -rf /tmp/data dd if=/dev/random of=/tmp/data count=1 bs=20 openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org" openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s` echo "priv key id = "$PRIV_KEY_ID PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s` echo "pub key id = "$PUB_KEY_ID keyctl pkey_query $PRIV_KEY_ID 0 keyctl pkey_query $PUB_KEY_ID 0 echo "Enc with priv key..." keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv echo "Dec with pub key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Sign with priv key..." keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig echo "Verify with pub key..." keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 echo "Enc with pub key..." keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub echo "Dec with priv key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Verify with pub key..." keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: lei he <helei.sig11@bytedance.com Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20220611064243.24535-2-pizhenwei@bytedance.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-11 09:42:43 +03:00
sym_info->hash_result_len = ldl_le_p(
&sess_req->u.chain.para.u.hash_param.hash_result_len);
} else {
/* VIRTIO_CRYPTO_SYM_HASH_MODE_NESTED */
error_report("unsupported hash mode");
return -VIRTIO_CRYPTO_NOTSUPP;
}
} else {
/* VIRTIO_CRYPTO_SYM_OP_NONE */
error_report("unsupported cipher op_type: VIRTIO_CRYPTO_SYM_OP_NONE");
return -VIRTIO_CRYPTO_NOTSUPP;
}
queue_index = virtio_crypto_vq2q(queue_id);
return cryptodev_backend_create_session(vcrypto->cryptodev, &sreq->info,
queue_index, sreq->cb, sreq);
}
static int
crypto: Introduce RSA algorithm There are two parts in this patch: 1, support akcipher service by cryptodev-builtin driver 2, virtio-crypto driver supports akcipher service In principle, we should separate this into two patches, to avoid compiling error, merge them into one. Then virtio-crypto gets request from guest side, and forwards the request to builtin driver to handle it. Test with a guest linux: 1, The self-test framework of crypto layer works fine in guest kernel 2, Test with Linux guest(with asym support), the following script test(note that pkey_XXX is supported only in a newer version of keyutils): - both public key & private key - create/close session - encrypt/decrypt/sign/verify basic driver operation - also test with kernel crypto layer(pkey add/query) All the cases work fine. Run script in guest: rm -rf *.der *.pem *.pfx modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m rm -rf /tmp/data dd if=/dev/random of=/tmp/data count=1 bs=20 openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org" openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s` echo "priv key id = "$PRIV_KEY_ID PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s` echo "pub key id = "$PUB_KEY_ID keyctl pkey_query $PRIV_KEY_ID 0 keyctl pkey_query $PUB_KEY_ID 0 echo "Enc with priv key..." keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv echo "Dec with pub key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Sign with priv key..." keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig echo "Verify with pub key..." keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 echo "Enc with pub key..." keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub echo "Dec with priv key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Verify with pub key..." keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: lei he <helei.sig11@bytedance.com Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20220611064243.24535-2-pizhenwei@bytedance.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-11 09:42:43 +03:00
virtio_crypto_create_asym_session(VirtIOCrypto *vcrypto,
struct virtio_crypto_akcipher_create_session_req *sess_req,
uint32_t queue_id, uint32_t opcode,
struct iovec *iov, unsigned int out_num,
VirtIOCryptoSessionReq *sreq)
crypto: Introduce RSA algorithm There are two parts in this patch: 1, support akcipher service by cryptodev-builtin driver 2, virtio-crypto driver supports akcipher service In principle, we should separate this into two patches, to avoid compiling error, merge them into one. Then virtio-crypto gets request from guest side, and forwards the request to builtin driver to handle it. Test with a guest linux: 1, The self-test framework of crypto layer works fine in guest kernel 2, Test with Linux guest(with asym support), the following script test(note that pkey_XXX is supported only in a newer version of keyutils): - both public key & private key - create/close session - encrypt/decrypt/sign/verify basic driver operation - also test with kernel crypto layer(pkey add/query) All the cases work fine. Run script in guest: rm -rf *.der *.pem *.pfx modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m rm -rf /tmp/data dd if=/dev/random of=/tmp/data count=1 bs=20 openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org" openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s` echo "priv key id = "$PRIV_KEY_ID PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s` echo "pub key id = "$PUB_KEY_ID keyctl pkey_query $PRIV_KEY_ID 0 keyctl pkey_query $PUB_KEY_ID 0 echo "Enc with priv key..." keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv echo "Dec with pub key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Sign with priv key..." keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig echo "Verify with pub key..." keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 echo "Enc with pub key..." keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub echo "Dec with priv key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Verify with pub key..." keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: lei he <helei.sig11@bytedance.com Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20220611064243.24535-2-pizhenwei@bytedance.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-11 09:42:43 +03:00
{
VirtIODevice *vdev = VIRTIO_DEVICE(vcrypto);
CryptoDevBackendAsymSessionInfo *asym_info = &sreq->info.u.asym_sess_info;
crypto: Introduce RSA algorithm There are two parts in this patch: 1, support akcipher service by cryptodev-builtin driver 2, virtio-crypto driver supports akcipher service In principle, we should separate this into two patches, to avoid compiling error, merge them into one. Then virtio-crypto gets request from guest side, and forwards the request to builtin driver to handle it. Test with a guest linux: 1, The self-test framework of crypto layer works fine in guest kernel 2, Test with Linux guest(with asym support), the following script test(note that pkey_XXX is supported only in a newer version of keyutils): - both public key & private key - create/close session - encrypt/decrypt/sign/verify basic driver operation - also test with kernel crypto layer(pkey add/query) All the cases work fine. Run script in guest: rm -rf *.der *.pem *.pfx modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m rm -rf /tmp/data dd if=/dev/random of=/tmp/data count=1 bs=20 openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org" openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s` echo "priv key id = "$PRIV_KEY_ID PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s` echo "pub key id = "$PUB_KEY_ID keyctl pkey_query $PRIV_KEY_ID 0 keyctl pkey_query $PUB_KEY_ID 0 echo "Enc with priv key..." keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv echo "Dec with pub key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Sign with priv key..." keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig echo "Verify with pub key..." keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 echo "Enc with pub key..." keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub echo "Dec with priv key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Verify with pub key..." keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: lei he <helei.sig11@bytedance.com Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20220611064243.24535-2-pizhenwei@bytedance.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-11 09:42:43 +03:00
int queue_index;
uint32_t algo, keytype, keylen;
algo = ldl_le_p(&sess_req->para.algo);
keytype = ldl_le_p(&sess_req->para.keytype);
keylen = ldl_le_p(&sess_req->para.keylen);
if ((keytype != VIRTIO_CRYPTO_AKCIPHER_KEY_TYPE_PUBLIC)
&& (keytype != VIRTIO_CRYPTO_AKCIPHER_KEY_TYPE_PRIVATE)) {
error_report("unsupported asym keytype: %d", keytype);
return -VIRTIO_CRYPTO_NOTSUPP;
}
if (keylen) {
asym_info->key = g_malloc(keylen);
if (iov_to_buf(iov, out_num, 0, asym_info->key, keylen) != keylen) {
crypto: Introduce RSA algorithm There are two parts in this patch: 1, support akcipher service by cryptodev-builtin driver 2, virtio-crypto driver supports akcipher service In principle, we should separate this into two patches, to avoid compiling error, merge them into one. Then virtio-crypto gets request from guest side, and forwards the request to builtin driver to handle it. Test with a guest linux: 1, The self-test framework of crypto layer works fine in guest kernel 2, Test with Linux guest(with asym support), the following script test(note that pkey_XXX is supported only in a newer version of keyutils): - both public key & private key - create/close session - encrypt/decrypt/sign/verify basic driver operation - also test with kernel crypto layer(pkey add/query) All the cases work fine. Run script in guest: rm -rf *.der *.pem *.pfx modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m rm -rf /tmp/data dd if=/dev/random of=/tmp/data count=1 bs=20 openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org" openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s` echo "priv key id = "$PRIV_KEY_ID PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s` echo "pub key id = "$PUB_KEY_ID keyctl pkey_query $PRIV_KEY_ID 0 keyctl pkey_query $PUB_KEY_ID 0 echo "Enc with priv key..." keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv echo "Dec with pub key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Sign with priv key..." keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig echo "Verify with pub key..." keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 echo "Enc with pub key..." keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub echo "Dec with priv key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Verify with pub key..." keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: lei he <helei.sig11@bytedance.com Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20220611064243.24535-2-pizhenwei@bytedance.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-11 09:42:43 +03:00
virtio_error(vdev, "virtio-crypto asym key incorrect");
return -EFAULT;
}
iov_discard_front(&iov, &out_num, keylen);
}
sreq->info.op_code = opcode;
asym_info = &sreq->info.u.asym_sess_info;
crypto: Introduce RSA algorithm There are two parts in this patch: 1, support akcipher service by cryptodev-builtin driver 2, virtio-crypto driver supports akcipher service In principle, we should separate this into two patches, to avoid compiling error, merge them into one. Then virtio-crypto gets request from guest side, and forwards the request to builtin driver to handle it. Test with a guest linux: 1, The self-test framework of crypto layer works fine in guest kernel 2, Test with Linux guest(with asym support), the following script test(note that pkey_XXX is supported only in a newer version of keyutils): - both public key & private key - create/close session - encrypt/decrypt/sign/verify basic driver operation - also test with kernel crypto layer(pkey add/query) All the cases work fine. Run script in guest: rm -rf *.der *.pem *.pfx modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m rm -rf /tmp/data dd if=/dev/random of=/tmp/data count=1 bs=20 openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org" openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s` echo "priv key id = "$PRIV_KEY_ID PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s` echo "pub key id = "$PUB_KEY_ID keyctl pkey_query $PRIV_KEY_ID 0 keyctl pkey_query $PUB_KEY_ID 0 echo "Enc with priv key..." keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv echo "Dec with pub key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Sign with priv key..." keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig echo "Verify with pub key..." keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 echo "Enc with pub key..." keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub echo "Dec with priv key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Verify with pub key..." keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: lei he <helei.sig11@bytedance.com Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20220611064243.24535-2-pizhenwei@bytedance.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-11 09:42:43 +03:00
asym_info->algo = algo;
asym_info->keytype = keytype;
asym_info->keylen = keylen;
switch (asym_info->algo) {
case VIRTIO_CRYPTO_AKCIPHER_RSA:
asym_info->u.rsa.padding_algo =
ldl_le_p(&sess_req->para.u.rsa.padding_algo);
asym_info->u.rsa.hash_algo =
ldl_le_p(&sess_req->para.u.rsa.hash_algo);
break;
/* TODO DSA&ECDSA handling */
default:
return -VIRTIO_CRYPTO_ERR;
}
queue_index = virtio_crypto_vq2q(queue_id);
return cryptodev_backend_create_session(vcrypto->cryptodev, &sreq->info,
queue_index, sreq->cb, sreq);
crypto: Introduce RSA algorithm There are two parts in this patch: 1, support akcipher service by cryptodev-builtin driver 2, virtio-crypto driver supports akcipher service In principle, we should separate this into two patches, to avoid compiling error, merge them into one. Then virtio-crypto gets request from guest side, and forwards the request to builtin driver to handle it. Test with a guest linux: 1, The self-test framework of crypto layer works fine in guest kernel 2, Test with Linux guest(with asym support), the following script test(note that pkey_XXX is supported only in a newer version of keyutils): - both public key & private key - create/close session - encrypt/decrypt/sign/verify basic driver operation - also test with kernel crypto layer(pkey add/query) All the cases work fine. Run script in guest: rm -rf *.der *.pem *.pfx modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m rm -rf /tmp/data dd if=/dev/random of=/tmp/data count=1 bs=20 openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org" openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s` echo "priv key id = "$PRIV_KEY_ID PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s` echo "pub key id = "$PUB_KEY_ID keyctl pkey_query $PRIV_KEY_ID 0 keyctl pkey_query $PUB_KEY_ID 0 echo "Enc with priv key..." keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv echo "Dec with pub key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Sign with priv key..." keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig echo "Verify with pub key..." keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 echo "Enc with pub key..." keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub echo "Dec with priv key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Verify with pub key..." keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: lei he <helei.sig11@bytedance.com Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20220611064243.24535-2-pizhenwei@bytedance.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-11 09:42:43 +03:00
}
static int
virtio_crypto_handle_close_session(VirtIOCrypto *vcrypto,
struct virtio_crypto_destroy_session_req *close_sess_req,
uint32_t queue_id,
VirtIOCryptoSessionReq *sreq)
{
uint64_t session_id;
session_id = ldq_le_p(&close_sess_req->session_id);
DPRINTF("close session, id=%" PRIu64 "\n", session_id);
return cryptodev_backend_close_session(
vcrypto->cryptodev, session_id, queue_id, sreq->cb, sreq);
}
static void virtio_crypto_create_session_completion(void *opaque, int ret)
{
VirtIOCryptoSessionReq *sreq = (VirtIOCryptoSessionReq *)opaque;
VirtQueue *vq = sreq->vq;
VirtQueueElement *elem = sreq->elem;
VirtIODevice *vdev = sreq->vdev;
struct virtio_crypto_session_input input;
struct iovec *in_iov = elem->in_sg;
unsigned in_num = elem->in_num;
size_t s;
memset(&input, 0, sizeof(input));
/* Serious errors, need to reset virtio crypto device */
if (ret == -EFAULT) {
virtqueue_detach_element(vq, elem, 0);
goto out;
} else if (ret == -VIRTIO_CRYPTO_NOTSUPP) {
stl_le_p(&input.status, VIRTIO_CRYPTO_NOTSUPP);
} else if (ret == -VIRTIO_CRYPTO_KEY_REJECTED) {
stl_le_p(&input.status, VIRTIO_CRYPTO_KEY_REJECTED);
} else if (ret != VIRTIO_CRYPTO_OK) {
stl_le_p(&input.status, VIRTIO_CRYPTO_ERR);
} else {
/* Set the session id */
stq_le_p(&input.session_id, sreq->info.session_id);
stl_le_p(&input.status, VIRTIO_CRYPTO_OK);
}
s = iov_from_buf(in_iov, in_num, 0, &input, sizeof(input));
if (unlikely(s != sizeof(input))) {
virtio_error(vdev, "virtio-crypto input incorrect");
virtqueue_detach_element(vq, elem, 0);
goto out;
}
virtqueue_push(vq, elem, sizeof(input));
virtio_notify(vdev, vq);
out:
g_free(elem);
virtio_crypto_free_create_session_req(sreq);
}
static void virtio_crypto_destroy_session_completion(void *opaque, int ret)
{
VirtIOCryptoSessionReq *sreq = (VirtIOCryptoSessionReq *)opaque;
VirtQueue *vq = sreq->vq;
VirtQueueElement *elem = sreq->elem;
VirtIODevice *vdev = sreq->vdev;
struct iovec *in_iov = elem->in_sg;
unsigned in_num = elem->in_num;
uint8_t status;
size_t s;
if (ret < 0) {
status = VIRTIO_CRYPTO_ERR;
} else {
status = VIRTIO_CRYPTO_OK;
}
s = iov_from_buf(in_iov, in_num, 0, &status, sizeof(status));
if (unlikely(s != sizeof(status))) {
virtio_error(vdev, "virtio-crypto status incorrect");
virtqueue_detach_element(vq, elem, 0);
goto out;
}
virtqueue_push(vq, elem, sizeof(status));
virtio_notify(vdev, vq);
out:
g_free(elem);
g_free(sreq);
}
static void virtio_crypto_handle_ctrl(VirtIODevice *vdev, VirtQueue *vq)
{
VirtIOCrypto *vcrypto = VIRTIO_CRYPTO(vdev);
struct virtio_crypto_op_ctrl_req ctrl;
VirtQueueElement *elem;
VirtIOCryptoSessionReq *sreq;
unsigned out_num;
unsigned in_num;
uint32_t queue_id;
uint32_t opcode;
struct virtio_crypto_session_input input;
size_t s;
int ret;
struct iovec *out_iov;
struct iovec *in_iov;
for (;;) {
g_autofree struct iovec *out_iov_copy = NULL;
elem = virtqueue_pop(vq, sizeof(VirtQueueElement));
if (!elem) {
break;
}
if (elem->out_num < 1 || elem->in_num < 1) {
virtio_error(vdev, "virtio-crypto ctrl missing headers");
virtqueue_detach_element(vq, elem, 0);
g_free(elem);
break;
}
out_num = elem->out_num;
out_iov_copy = g_memdup2(elem->out_sg, sizeof(out_iov[0]) * out_num);
out_iov = out_iov_copy;
in_num = elem->in_num;
in_iov = elem->in_sg;
if (unlikely(iov_to_buf(out_iov, out_num, 0, &ctrl, sizeof(ctrl))
!= sizeof(ctrl))) {
virtio_error(vdev, "virtio-crypto request ctrl_hdr too short");
virtqueue_detach_element(vq, elem, 0);
g_free(elem);
break;
}
iov_discard_front(&out_iov, &out_num, sizeof(ctrl));
opcode = ldl_le_p(&ctrl.header.opcode);
queue_id = ldl_le_p(&ctrl.header.queue_id);
sreq = g_new0(VirtIOCryptoSessionReq, 1);
sreq->vdev = vdev;
sreq->vq = vq;
sreq->elem = elem;
switch (opcode) {
case VIRTIO_CRYPTO_CIPHER_CREATE_SESSION:
sreq->cb = virtio_crypto_create_session_completion;
ret = virtio_crypto_create_sym_session(vcrypto,
&ctrl.u.sym_create_session,
queue_id, opcode,
out_iov, out_num,
sreq);
if (ret < 0) {
virtio_crypto_create_session_completion(sreq, ret);
}
break;
crypto: Introduce RSA algorithm There are two parts in this patch: 1, support akcipher service by cryptodev-builtin driver 2, virtio-crypto driver supports akcipher service In principle, we should separate this into two patches, to avoid compiling error, merge them into one. Then virtio-crypto gets request from guest side, and forwards the request to builtin driver to handle it. Test with a guest linux: 1, The self-test framework of crypto layer works fine in guest kernel 2, Test with Linux guest(with asym support), the following script test(note that pkey_XXX is supported only in a newer version of keyutils): - both public key & private key - create/close session - encrypt/decrypt/sign/verify basic driver operation - also test with kernel crypto layer(pkey add/query) All the cases work fine. Run script in guest: rm -rf *.der *.pem *.pfx modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m rm -rf /tmp/data dd if=/dev/random of=/tmp/data count=1 bs=20 openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org" openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s` echo "priv key id = "$PRIV_KEY_ID PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s` echo "pub key id = "$PUB_KEY_ID keyctl pkey_query $PRIV_KEY_ID 0 keyctl pkey_query $PUB_KEY_ID 0 echo "Enc with priv key..." keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv echo "Dec with pub key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Sign with priv key..." keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig echo "Verify with pub key..." keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 echo "Enc with pub key..." keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub echo "Dec with priv key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Verify with pub key..." keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: lei he <helei.sig11@bytedance.com Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20220611064243.24535-2-pizhenwei@bytedance.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-11 09:42:43 +03:00
case VIRTIO_CRYPTO_AKCIPHER_CREATE_SESSION:
sreq->cb = virtio_crypto_create_session_completion;
ret = virtio_crypto_create_asym_session(vcrypto,
crypto: Introduce RSA algorithm There are two parts in this patch: 1, support akcipher service by cryptodev-builtin driver 2, virtio-crypto driver supports akcipher service In principle, we should separate this into two patches, to avoid compiling error, merge them into one. Then virtio-crypto gets request from guest side, and forwards the request to builtin driver to handle it. Test with a guest linux: 1, The self-test framework of crypto layer works fine in guest kernel 2, Test with Linux guest(with asym support), the following script test(note that pkey_XXX is supported only in a newer version of keyutils): - both public key & private key - create/close session - encrypt/decrypt/sign/verify basic driver operation - also test with kernel crypto layer(pkey add/query) All the cases work fine. Run script in guest: rm -rf *.der *.pem *.pfx modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m rm -rf /tmp/data dd if=/dev/random of=/tmp/data count=1 bs=20 openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org" openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s` echo "priv key id = "$PRIV_KEY_ID PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s` echo "pub key id = "$PUB_KEY_ID keyctl pkey_query $PRIV_KEY_ID 0 keyctl pkey_query $PUB_KEY_ID 0 echo "Enc with priv key..." keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv echo "Dec with pub key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Sign with priv key..." keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig echo "Verify with pub key..." keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 echo "Enc with pub key..." keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub echo "Dec with priv key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Verify with pub key..." keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: lei he <helei.sig11@bytedance.com Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20220611064243.24535-2-pizhenwei@bytedance.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-11 09:42:43 +03:00
&ctrl.u.akcipher_create_session,
queue_id, opcode,
out_iov, out_num,
sreq);
if (ret < 0) {
virtio_crypto_create_session_completion(sreq, ret);
}
break;
crypto: Introduce RSA algorithm There are two parts in this patch: 1, support akcipher service by cryptodev-builtin driver 2, virtio-crypto driver supports akcipher service In principle, we should separate this into two patches, to avoid compiling error, merge them into one. Then virtio-crypto gets request from guest side, and forwards the request to builtin driver to handle it. Test with a guest linux: 1, The self-test framework of crypto layer works fine in guest kernel 2, Test with Linux guest(with asym support), the following script test(note that pkey_XXX is supported only in a newer version of keyutils): - both public key & private key - create/close session - encrypt/decrypt/sign/verify basic driver operation - also test with kernel crypto layer(pkey add/query) All the cases work fine. Run script in guest: rm -rf *.der *.pem *.pfx modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m rm -rf /tmp/data dd if=/dev/random of=/tmp/data count=1 bs=20 openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org" openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s` echo "priv key id = "$PRIV_KEY_ID PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s` echo "pub key id = "$PUB_KEY_ID keyctl pkey_query $PRIV_KEY_ID 0 keyctl pkey_query $PUB_KEY_ID 0 echo "Enc with priv key..." keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv echo "Dec with pub key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Sign with priv key..." keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig echo "Verify with pub key..." keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 echo "Enc with pub key..." keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub echo "Dec with priv key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Verify with pub key..." keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: lei he <helei.sig11@bytedance.com Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20220611064243.24535-2-pizhenwei@bytedance.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-11 09:42:43 +03:00
case VIRTIO_CRYPTO_CIPHER_DESTROY_SESSION:
case VIRTIO_CRYPTO_HASH_DESTROY_SESSION:
case VIRTIO_CRYPTO_MAC_DESTROY_SESSION:
case VIRTIO_CRYPTO_AEAD_DESTROY_SESSION:
crypto: Introduce RSA algorithm There are two parts in this patch: 1, support akcipher service by cryptodev-builtin driver 2, virtio-crypto driver supports akcipher service In principle, we should separate this into two patches, to avoid compiling error, merge them into one. Then virtio-crypto gets request from guest side, and forwards the request to builtin driver to handle it. Test with a guest linux: 1, The self-test framework of crypto layer works fine in guest kernel 2, Test with Linux guest(with asym support), the following script test(note that pkey_XXX is supported only in a newer version of keyutils): - both public key & private key - create/close session - encrypt/decrypt/sign/verify basic driver operation - also test with kernel crypto layer(pkey add/query) All the cases work fine. Run script in guest: rm -rf *.der *.pem *.pfx modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m rm -rf /tmp/data dd if=/dev/random of=/tmp/data count=1 bs=20 openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org" openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s` echo "priv key id = "$PRIV_KEY_ID PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s` echo "pub key id = "$PUB_KEY_ID keyctl pkey_query $PRIV_KEY_ID 0 keyctl pkey_query $PUB_KEY_ID 0 echo "Enc with priv key..." keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv echo "Dec with pub key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Sign with priv key..." keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig echo "Verify with pub key..." keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 echo "Enc with pub key..." keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub echo "Dec with priv key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Verify with pub key..." keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: lei he <helei.sig11@bytedance.com Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20220611064243.24535-2-pizhenwei@bytedance.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-11 09:42:43 +03:00
case VIRTIO_CRYPTO_AKCIPHER_DESTROY_SESSION:
sreq->cb = virtio_crypto_destroy_session_completion;
ret = virtio_crypto_handle_close_session(vcrypto,
&ctrl.u.destroy_session, queue_id,
sreq);
if (ret < 0) {
virtio_crypto_destroy_session_completion(sreq, ret);
}
break;
case VIRTIO_CRYPTO_HASH_CREATE_SESSION:
case VIRTIO_CRYPTO_MAC_CREATE_SESSION:
case VIRTIO_CRYPTO_AEAD_CREATE_SESSION:
default:
memset(&input, 0, sizeof(input));
error_report("virtio-crypto unsupported ctrl opcode: %d", opcode);
stl_le_p(&input.status, VIRTIO_CRYPTO_NOTSUPP);
s = iov_from_buf(in_iov, in_num, 0, &input, sizeof(input));
if (unlikely(s != sizeof(input))) {
virtio_error(vdev, "virtio-crypto input incorrect");
virtqueue_detach_element(vq, elem, 0);
} else {
virtqueue_push(vq, elem, sizeof(input));
virtio_notify(vdev, vq);
}
g_free(sreq);
g_free(elem);
break;
} /* end switch case */
} /* end for loop */
}
static void virtio_crypto_init_request(VirtIOCrypto *vcrypto, VirtQueue *vq,
VirtIOCryptoReq *req)
{
req->vcrypto = vcrypto;
req->vq = vq;
req->in = NULL;
req->in_iov = NULL;
req->in_num = 0;
req->in_len = 0;
req->flags = QCRYPTODEV_BACKEND_ALG__MAX;
crypto: Introduce RSA algorithm There are two parts in this patch: 1, support akcipher service by cryptodev-builtin driver 2, virtio-crypto driver supports akcipher service In principle, we should separate this into two patches, to avoid compiling error, merge them into one. Then virtio-crypto gets request from guest side, and forwards the request to builtin driver to handle it. Test with a guest linux: 1, The self-test framework of crypto layer works fine in guest kernel 2, Test with Linux guest(with asym support), the following script test(note that pkey_XXX is supported only in a newer version of keyutils): - both public key & private key - create/close session - encrypt/decrypt/sign/verify basic driver operation - also test with kernel crypto layer(pkey add/query) All the cases work fine. Run script in guest: rm -rf *.der *.pem *.pfx modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m rm -rf /tmp/data dd if=/dev/random of=/tmp/data count=1 bs=20 openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org" openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s` echo "priv key id = "$PRIV_KEY_ID PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s` echo "pub key id = "$PUB_KEY_ID keyctl pkey_query $PRIV_KEY_ID 0 keyctl pkey_query $PUB_KEY_ID 0 echo "Enc with priv key..." keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv echo "Dec with pub key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Sign with priv key..." keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig echo "Verify with pub key..." keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 echo "Enc with pub key..." keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub echo "Dec with priv key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Verify with pub key..." keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: lei he <helei.sig11@bytedance.com Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20220611064243.24535-2-pizhenwei@bytedance.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-11 09:42:43 +03:00
memset(&req->op_info, 0x00, sizeof(req->op_info));
}
static void virtio_crypto_free_request(VirtIOCryptoReq *req)
{
crypto: Introduce RSA algorithm There are two parts in this patch: 1, support akcipher service by cryptodev-builtin driver 2, virtio-crypto driver supports akcipher service In principle, we should separate this into two patches, to avoid compiling error, merge them into one. Then virtio-crypto gets request from guest side, and forwards the request to builtin driver to handle it. Test with a guest linux: 1, The self-test framework of crypto layer works fine in guest kernel 2, Test with Linux guest(with asym support), the following script test(note that pkey_XXX is supported only in a newer version of keyutils): - both public key & private key - create/close session - encrypt/decrypt/sign/verify basic driver operation - also test with kernel crypto layer(pkey add/query) All the cases work fine. Run script in guest: rm -rf *.der *.pem *.pfx modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m rm -rf /tmp/data dd if=/dev/random of=/tmp/data count=1 bs=20 openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org" openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s` echo "priv key id = "$PRIV_KEY_ID PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s` echo "pub key id = "$PUB_KEY_ID keyctl pkey_query $PRIV_KEY_ID 0 keyctl pkey_query $PUB_KEY_ID 0 echo "Enc with priv key..." keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv echo "Dec with pub key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Sign with priv key..." keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig echo "Verify with pub key..." keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 echo "Enc with pub key..." keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub echo "Dec with priv key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Verify with pub key..." keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: lei he <helei.sig11@bytedance.com Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20220611064243.24535-2-pizhenwei@bytedance.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-11 09:42:43 +03:00
if (!req) {
return;
}
if (req->flags == QCRYPTODEV_BACKEND_ALG_SYM) {
crypto: Introduce RSA algorithm There are two parts in this patch: 1, support akcipher service by cryptodev-builtin driver 2, virtio-crypto driver supports akcipher service In principle, we should separate this into two patches, to avoid compiling error, merge them into one. Then virtio-crypto gets request from guest side, and forwards the request to builtin driver to handle it. Test with a guest linux: 1, The self-test framework of crypto layer works fine in guest kernel 2, Test with Linux guest(with asym support), the following script test(note that pkey_XXX is supported only in a newer version of keyutils): - both public key & private key - create/close session - encrypt/decrypt/sign/verify basic driver operation - also test with kernel crypto layer(pkey add/query) All the cases work fine. Run script in guest: rm -rf *.der *.pem *.pfx modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m rm -rf /tmp/data dd if=/dev/random of=/tmp/data count=1 bs=20 openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org" openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s` echo "priv key id = "$PRIV_KEY_ID PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s` echo "pub key id = "$PUB_KEY_ID keyctl pkey_query $PRIV_KEY_ID 0 keyctl pkey_query $PUB_KEY_ID 0 echo "Enc with priv key..." keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv echo "Dec with pub key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Sign with priv key..." keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig echo "Verify with pub key..." keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 echo "Enc with pub key..." keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub echo "Dec with priv key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Verify with pub key..." keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: lei he <helei.sig11@bytedance.com Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20220611064243.24535-2-pizhenwei@bytedance.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-11 09:42:43 +03:00
size_t max_len;
CryptoDevBackendSymOpInfo *op_info = req->op_info.u.sym_op_info;
max_len = op_info->iv_len +
op_info->aad_len +
op_info->src_len +
op_info->dst_len +
op_info->digest_result_len;
/* Zeroize and free request data structure */
memset(op_info, 0, sizeof(*op_info) + max_len);
g_free(op_info);
} else if (req->flags == QCRYPTODEV_BACKEND_ALG_ASYM) {
crypto: Introduce RSA algorithm There are two parts in this patch: 1, support akcipher service by cryptodev-builtin driver 2, virtio-crypto driver supports akcipher service In principle, we should separate this into two patches, to avoid compiling error, merge them into one. Then virtio-crypto gets request from guest side, and forwards the request to builtin driver to handle it. Test with a guest linux: 1, The self-test framework of crypto layer works fine in guest kernel 2, Test with Linux guest(with asym support), the following script test(note that pkey_XXX is supported only in a newer version of keyutils): - both public key & private key - create/close session - encrypt/decrypt/sign/verify basic driver operation - also test with kernel crypto layer(pkey add/query) All the cases work fine. Run script in guest: rm -rf *.der *.pem *.pfx modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m rm -rf /tmp/data dd if=/dev/random of=/tmp/data count=1 bs=20 openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org" openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s` echo "priv key id = "$PRIV_KEY_ID PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s` echo "pub key id = "$PUB_KEY_ID keyctl pkey_query $PRIV_KEY_ID 0 keyctl pkey_query $PUB_KEY_ID 0 echo "Enc with priv key..." keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv echo "Dec with pub key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Sign with priv key..." keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig echo "Verify with pub key..." keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 echo "Enc with pub key..." keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub echo "Dec with priv key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Verify with pub key..." keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: lei he <helei.sig11@bytedance.com Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20220611064243.24535-2-pizhenwei@bytedance.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-11 09:42:43 +03:00
CryptoDevBackendAsymOpInfo *op_info = req->op_info.u.asym_op_info;
if (op_info) {
g_free(op_info->src);
g_free(op_info->dst);
memset(op_info, 0, sizeof(*op_info));
g_free(op_info);
}
}
crypto: Introduce RSA algorithm There are two parts in this patch: 1, support akcipher service by cryptodev-builtin driver 2, virtio-crypto driver supports akcipher service In principle, we should separate this into two patches, to avoid compiling error, merge them into one. Then virtio-crypto gets request from guest side, and forwards the request to builtin driver to handle it. Test with a guest linux: 1, The self-test framework of crypto layer works fine in guest kernel 2, Test with Linux guest(with asym support), the following script test(note that pkey_XXX is supported only in a newer version of keyutils): - both public key & private key - create/close session - encrypt/decrypt/sign/verify basic driver operation - also test with kernel crypto layer(pkey add/query) All the cases work fine. Run script in guest: rm -rf *.der *.pem *.pfx modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m rm -rf /tmp/data dd if=/dev/random of=/tmp/data count=1 bs=20 openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org" openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s` echo "priv key id = "$PRIV_KEY_ID PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s` echo "pub key id = "$PUB_KEY_ID keyctl pkey_query $PRIV_KEY_ID 0 keyctl pkey_query $PUB_KEY_ID 0 echo "Enc with priv key..." keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv echo "Dec with pub key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Sign with priv key..." keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig echo "Verify with pub key..." keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 echo "Enc with pub key..." keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub echo "Dec with priv key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Verify with pub key..." keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: lei he <helei.sig11@bytedance.com Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20220611064243.24535-2-pizhenwei@bytedance.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-11 09:42:43 +03:00
g_free(req->in_iov);
crypto: Introduce RSA algorithm There are two parts in this patch: 1, support akcipher service by cryptodev-builtin driver 2, virtio-crypto driver supports akcipher service In principle, we should separate this into two patches, to avoid compiling error, merge them into one. Then virtio-crypto gets request from guest side, and forwards the request to builtin driver to handle it. Test with a guest linux: 1, The self-test framework of crypto layer works fine in guest kernel 2, Test with Linux guest(with asym support), the following script test(note that pkey_XXX is supported only in a newer version of keyutils): - both public key & private key - create/close session - encrypt/decrypt/sign/verify basic driver operation - also test with kernel crypto layer(pkey add/query) All the cases work fine. Run script in guest: rm -rf *.der *.pem *.pfx modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m rm -rf /tmp/data dd if=/dev/random of=/tmp/data count=1 bs=20 openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org" openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s` echo "priv key id = "$PRIV_KEY_ID PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s` echo "pub key id = "$PUB_KEY_ID keyctl pkey_query $PRIV_KEY_ID 0 keyctl pkey_query $PUB_KEY_ID 0 echo "Enc with priv key..." keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv echo "Dec with pub key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Sign with priv key..." keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig echo "Verify with pub key..." keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 echo "Enc with pub key..." keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub echo "Dec with priv key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Verify with pub key..." keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: lei he <helei.sig11@bytedance.com Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20220611064243.24535-2-pizhenwei@bytedance.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-11 09:42:43 +03:00
g_free(req);
}
static void
virtio_crypto_sym_input_data_helper(VirtIODevice *vdev,
VirtIOCryptoReq *req,
uint32_t status,
CryptoDevBackendSymOpInfo *sym_op_info)
{
size_t s, len;
struct iovec *in_iov = req->in_iov;
if (status != VIRTIO_CRYPTO_OK) {
return;
}
len = sym_op_info->src_len;
/* Save the cipher result */
s = iov_from_buf(in_iov, req->in_num, 0, sym_op_info->dst, len);
if (s != len) {
virtio_error(vdev, "virtio-crypto dest data incorrect");
return;
}
iov_discard_front(&in_iov, &req->in_num, len);
if (sym_op_info->op_type ==
VIRTIO_CRYPTO_SYM_OP_ALGORITHM_CHAINING) {
/* Save the digest result */
s = iov_from_buf(in_iov, req->in_num, 0,
sym_op_info->digest_result,
sym_op_info->digest_result_len);
if (s != sym_op_info->digest_result_len) {
virtio_error(vdev, "virtio-crypto digest result incorrect");
}
}
}
crypto: Introduce RSA algorithm There are two parts in this patch: 1, support akcipher service by cryptodev-builtin driver 2, virtio-crypto driver supports akcipher service In principle, we should separate this into two patches, to avoid compiling error, merge them into one. Then virtio-crypto gets request from guest side, and forwards the request to builtin driver to handle it. Test with a guest linux: 1, The self-test framework of crypto layer works fine in guest kernel 2, Test with Linux guest(with asym support), the following script test(note that pkey_XXX is supported only in a newer version of keyutils): - both public key & private key - create/close session - encrypt/decrypt/sign/verify basic driver operation - also test with kernel crypto layer(pkey add/query) All the cases work fine. Run script in guest: rm -rf *.der *.pem *.pfx modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m rm -rf /tmp/data dd if=/dev/random of=/tmp/data count=1 bs=20 openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org" openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s` echo "priv key id = "$PRIV_KEY_ID PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s` echo "pub key id = "$PUB_KEY_ID keyctl pkey_query $PRIV_KEY_ID 0 keyctl pkey_query $PUB_KEY_ID 0 echo "Enc with priv key..." keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv echo "Dec with pub key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Sign with priv key..." keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig echo "Verify with pub key..." keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 echo "Enc with pub key..." keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub echo "Dec with priv key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Verify with pub key..." keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: lei he <helei.sig11@bytedance.com Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20220611064243.24535-2-pizhenwei@bytedance.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-11 09:42:43 +03:00
static void
virtio_crypto_akcipher_input_data_helper(VirtIODevice *vdev,
VirtIOCryptoReq *req, int32_t status,
CryptoDevBackendAsymOpInfo *asym_op_info)
{
size_t s, len;
struct iovec *in_iov = req->in_iov;
crypto: Introduce RSA algorithm There are two parts in this patch: 1, support akcipher service by cryptodev-builtin driver 2, virtio-crypto driver supports akcipher service In principle, we should separate this into two patches, to avoid compiling error, merge them into one. Then virtio-crypto gets request from guest side, and forwards the request to builtin driver to handle it. Test with a guest linux: 1, The self-test framework of crypto layer works fine in guest kernel 2, Test with Linux guest(with asym support), the following script test(note that pkey_XXX is supported only in a newer version of keyutils): - both public key & private key - create/close session - encrypt/decrypt/sign/verify basic driver operation - also test with kernel crypto layer(pkey add/query) All the cases work fine. Run script in guest: rm -rf *.der *.pem *.pfx modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m rm -rf /tmp/data dd if=/dev/random of=/tmp/data count=1 bs=20 openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org" openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s` echo "priv key id = "$PRIV_KEY_ID PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s` echo "pub key id = "$PUB_KEY_ID keyctl pkey_query $PRIV_KEY_ID 0 keyctl pkey_query $PUB_KEY_ID 0 echo "Enc with priv key..." keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv echo "Dec with pub key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Sign with priv key..." keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig echo "Verify with pub key..." keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 echo "Enc with pub key..." keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub echo "Dec with priv key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Verify with pub key..." keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: lei he <helei.sig11@bytedance.com Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20220611064243.24535-2-pizhenwei@bytedance.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-11 09:42:43 +03:00
if (status != VIRTIO_CRYPTO_OK) {
return;
}
len = asym_op_info->dst_len;
if (!len) {
return;
}
s = iov_from_buf(in_iov, req->in_num, 0, asym_op_info->dst, len);
crypto: Introduce RSA algorithm There are two parts in this patch: 1, support akcipher service by cryptodev-builtin driver 2, virtio-crypto driver supports akcipher service In principle, we should separate this into two patches, to avoid compiling error, merge them into one. Then virtio-crypto gets request from guest side, and forwards the request to builtin driver to handle it. Test with a guest linux: 1, The self-test framework of crypto layer works fine in guest kernel 2, Test with Linux guest(with asym support), the following script test(note that pkey_XXX is supported only in a newer version of keyutils): - both public key & private key - create/close session - encrypt/decrypt/sign/verify basic driver operation - also test with kernel crypto layer(pkey add/query) All the cases work fine. Run script in guest: rm -rf *.der *.pem *.pfx modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m rm -rf /tmp/data dd if=/dev/random of=/tmp/data count=1 bs=20 openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org" openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s` echo "priv key id = "$PRIV_KEY_ID PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s` echo "pub key id = "$PUB_KEY_ID keyctl pkey_query $PRIV_KEY_ID 0 keyctl pkey_query $PUB_KEY_ID 0 echo "Enc with priv key..." keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv echo "Dec with pub key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Sign with priv key..." keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig echo "Verify with pub key..." keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 echo "Enc with pub key..." keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub echo "Dec with priv key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Verify with pub key..." keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: lei he <helei.sig11@bytedance.com Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20220611064243.24535-2-pizhenwei@bytedance.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-11 09:42:43 +03:00
if (s != len) {
virtio_error(vdev, "virtio-crypto asym dest data incorrect");
return;
}
iov_discard_front(&in_iov, &req->in_num, len);
crypto: Introduce RSA algorithm There are two parts in this patch: 1, support akcipher service by cryptodev-builtin driver 2, virtio-crypto driver supports akcipher service In principle, we should separate this into two patches, to avoid compiling error, merge them into one. Then virtio-crypto gets request from guest side, and forwards the request to builtin driver to handle it. Test with a guest linux: 1, The self-test framework of crypto layer works fine in guest kernel 2, Test with Linux guest(with asym support), the following script test(note that pkey_XXX is supported only in a newer version of keyutils): - both public key & private key - create/close session - encrypt/decrypt/sign/verify basic driver operation - also test with kernel crypto layer(pkey add/query) All the cases work fine. Run script in guest: rm -rf *.der *.pem *.pfx modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m rm -rf /tmp/data dd if=/dev/random of=/tmp/data count=1 bs=20 openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org" openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s` echo "priv key id = "$PRIV_KEY_ID PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s` echo "pub key id = "$PUB_KEY_ID keyctl pkey_query $PRIV_KEY_ID 0 keyctl pkey_query $PUB_KEY_ID 0 echo "Enc with priv key..." keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv echo "Dec with pub key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Sign with priv key..." keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig echo "Verify with pub key..." keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 echo "Enc with pub key..." keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub echo "Dec with priv key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Verify with pub key..." keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: lei he <helei.sig11@bytedance.com Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20220611064243.24535-2-pizhenwei@bytedance.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-11 09:42:43 +03:00
/* For akcipher, dst_len may be changed after operation */
req->in_len = sizeof(struct virtio_crypto_inhdr) + asym_op_info->dst_len;
}
static void virtio_crypto_req_complete(void *opaque, int ret)
{
VirtIOCryptoReq *req = (VirtIOCryptoReq *)opaque;
VirtIOCrypto *vcrypto = req->vcrypto;
VirtIODevice *vdev = VIRTIO_DEVICE(vcrypto);
uint8_t status = -ret;
if (req->flags == QCRYPTODEV_BACKEND_ALG_SYM) {
virtio_crypto_sym_input_data_helper(vdev, req, status,
crypto: Introduce RSA algorithm There are two parts in this patch: 1, support akcipher service by cryptodev-builtin driver 2, virtio-crypto driver supports akcipher service In principle, we should separate this into two patches, to avoid compiling error, merge them into one. Then virtio-crypto gets request from guest side, and forwards the request to builtin driver to handle it. Test with a guest linux: 1, The self-test framework of crypto layer works fine in guest kernel 2, Test with Linux guest(with asym support), the following script test(note that pkey_XXX is supported only in a newer version of keyutils): - both public key & private key - create/close session - encrypt/decrypt/sign/verify basic driver operation - also test with kernel crypto layer(pkey add/query) All the cases work fine. Run script in guest: rm -rf *.der *.pem *.pfx modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m rm -rf /tmp/data dd if=/dev/random of=/tmp/data count=1 bs=20 openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org" openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s` echo "priv key id = "$PRIV_KEY_ID PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s` echo "pub key id = "$PUB_KEY_ID keyctl pkey_query $PRIV_KEY_ID 0 keyctl pkey_query $PUB_KEY_ID 0 echo "Enc with priv key..." keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv echo "Dec with pub key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Sign with priv key..." keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig echo "Verify with pub key..." keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 echo "Enc with pub key..." keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub echo "Dec with priv key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Verify with pub key..." keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: lei he <helei.sig11@bytedance.com Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20220611064243.24535-2-pizhenwei@bytedance.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-11 09:42:43 +03:00
req->op_info.u.sym_op_info);
} else if (req->flags == QCRYPTODEV_BACKEND_ALG_ASYM) {
crypto: Introduce RSA algorithm There are two parts in this patch: 1, support akcipher service by cryptodev-builtin driver 2, virtio-crypto driver supports akcipher service In principle, we should separate this into two patches, to avoid compiling error, merge them into one. Then virtio-crypto gets request from guest side, and forwards the request to builtin driver to handle it. Test with a guest linux: 1, The self-test framework of crypto layer works fine in guest kernel 2, Test with Linux guest(with asym support), the following script test(note that pkey_XXX is supported only in a newer version of keyutils): - both public key & private key - create/close session - encrypt/decrypt/sign/verify basic driver operation - also test with kernel crypto layer(pkey add/query) All the cases work fine. Run script in guest: rm -rf *.der *.pem *.pfx modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m rm -rf /tmp/data dd if=/dev/random of=/tmp/data count=1 bs=20 openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org" openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s` echo "priv key id = "$PRIV_KEY_ID PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s` echo "pub key id = "$PUB_KEY_ID keyctl pkey_query $PRIV_KEY_ID 0 keyctl pkey_query $PUB_KEY_ID 0 echo "Enc with priv key..." keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv echo "Dec with pub key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Sign with priv key..." keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig echo "Verify with pub key..." keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 echo "Enc with pub key..." keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub echo "Dec with priv key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Verify with pub key..." keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: lei he <helei.sig11@bytedance.com Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20220611064243.24535-2-pizhenwei@bytedance.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-11 09:42:43 +03:00
virtio_crypto_akcipher_input_data_helper(vdev, req, status,
req->op_info.u.asym_op_info);
}
stb_p(&req->in->status, status);
virtqueue_push(req->vq, &req->elem, req->in_len);
virtio_notify(vdev, req->vq);
virtio_crypto_free_request(req);
}
static VirtIOCryptoReq *
virtio_crypto_get_request(VirtIOCrypto *s, VirtQueue *vq)
{
VirtIOCryptoReq *req = virtqueue_pop(vq, sizeof(VirtIOCryptoReq));
if (req) {
virtio_crypto_init_request(s, vq, req);
}
return req;
}
static CryptoDevBackendSymOpInfo *
virtio_crypto_sym_op_helper(VirtIODevice *vdev,
struct virtio_crypto_cipher_para *cipher_para,
struct virtio_crypto_alg_chain_data_para *alg_chain_para,
struct iovec *iov, unsigned int out_num)
{
VirtIOCrypto *vcrypto = VIRTIO_CRYPTO(vdev);
CryptoDevBackendSymOpInfo *op_info;
uint32_t src_len = 0, dst_len = 0;
uint32_t iv_len = 0;
uint32_t aad_len = 0, hash_result_len = 0;
uint32_t hash_start_src_offset = 0, len_to_hash = 0;
uint32_t cipher_start_src_offset = 0, len_to_cipher = 0;
uint64_t max_len, curr_size = 0;
size_t s;
/* Plain cipher */
if (cipher_para) {
iv_len = ldl_le_p(&cipher_para->iv_len);
src_len = ldl_le_p(&cipher_para->src_data_len);
dst_len = ldl_le_p(&cipher_para->dst_data_len);
} else if (alg_chain_para) { /* Algorithm chain */
iv_len = ldl_le_p(&alg_chain_para->iv_len);
src_len = ldl_le_p(&alg_chain_para->src_data_len);
dst_len = ldl_le_p(&alg_chain_para->dst_data_len);
aad_len = ldl_le_p(&alg_chain_para->aad_len);
hash_result_len = ldl_le_p(&alg_chain_para->hash_result_len);
hash_start_src_offset = ldl_le_p(
&alg_chain_para->hash_start_src_offset);
cipher_start_src_offset = ldl_le_p(
&alg_chain_para->cipher_start_src_offset);
len_to_cipher = ldl_le_p(&alg_chain_para->len_to_cipher);
len_to_hash = ldl_le_p(&alg_chain_para->len_to_hash);
} else {
return NULL;
}
max_len = (uint64_t)iv_len + aad_len + src_len + dst_len + hash_result_len;
if (unlikely(max_len > vcrypto->conf.max_size)) {
virtio_error(vdev, "virtio-crypto too big length");
return NULL;
}
op_info = g_malloc0(sizeof(CryptoDevBackendSymOpInfo) + max_len);
op_info->iv_len = iv_len;
op_info->src_len = src_len;
op_info->dst_len = dst_len;
op_info->aad_len = aad_len;
op_info->digest_result_len = hash_result_len;
op_info->hash_start_src_offset = hash_start_src_offset;
op_info->len_to_hash = len_to_hash;
op_info->cipher_start_src_offset = cipher_start_src_offset;
op_info->len_to_cipher = len_to_cipher;
/* Handle the initilization vector */
if (op_info->iv_len > 0) {
DPRINTF("iv_len=%" PRIu32 "\n", op_info->iv_len);
op_info->iv = op_info->data + curr_size;
s = iov_to_buf(iov, out_num, 0, op_info->iv, op_info->iv_len);
if (unlikely(s != op_info->iv_len)) {
virtio_error(vdev, "virtio-crypto iv incorrect");
goto err;
}
iov_discard_front(&iov, &out_num, op_info->iv_len);
curr_size += op_info->iv_len;
}
/* Handle additional authentication data if exists */
if (op_info->aad_len > 0) {
DPRINTF("aad_len=%" PRIu32 "\n", op_info->aad_len);
op_info->aad_data = op_info->data + curr_size;
s = iov_to_buf(iov, out_num, 0, op_info->aad_data, op_info->aad_len);
if (unlikely(s != op_info->aad_len)) {
virtio_error(vdev, "virtio-crypto additional auth data incorrect");
goto err;
}
iov_discard_front(&iov, &out_num, op_info->aad_len);
curr_size += op_info->aad_len;
}
/* Handle the source data */
if (op_info->src_len > 0) {
DPRINTF("src_len=%" PRIu32 "\n", op_info->src_len);
op_info->src = op_info->data + curr_size;
s = iov_to_buf(iov, out_num, 0, op_info->src, op_info->src_len);
if (unlikely(s != op_info->src_len)) {
virtio_error(vdev, "virtio-crypto source data incorrect");
goto err;
}
iov_discard_front(&iov, &out_num, op_info->src_len);
curr_size += op_info->src_len;
}
/* Handle the destination data */
op_info->dst = op_info->data + curr_size;
curr_size += op_info->dst_len;
DPRINTF("dst_len=%" PRIu32 "\n", op_info->dst_len);
/* Handle the hash digest result */
if (hash_result_len > 0) {
DPRINTF("hash_result_len=%" PRIu32 "\n", hash_result_len);
op_info->digest_result = op_info->data + curr_size;
}
return op_info;
err:
g_free(op_info);
return NULL;
}
static int
virtio_crypto_handle_sym_req(VirtIOCrypto *vcrypto,
struct virtio_crypto_sym_data_req *req,
crypto: Introduce RSA algorithm There are two parts in this patch: 1, support akcipher service by cryptodev-builtin driver 2, virtio-crypto driver supports akcipher service In principle, we should separate this into two patches, to avoid compiling error, merge them into one. Then virtio-crypto gets request from guest side, and forwards the request to builtin driver to handle it. Test with a guest linux: 1, The self-test framework of crypto layer works fine in guest kernel 2, Test with Linux guest(with asym support), the following script test(note that pkey_XXX is supported only in a newer version of keyutils): - both public key & private key - create/close session - encrypt/decrypt/sign/verify basic driver operation - also test with kernel crypto layer(pkey add/query) All the cases work fine. Run script in guest: rm -rf *.der *.pem *.pfx modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m rm -rf /tmp/data dd if=/dev/random of=/tmp/data count=1 bs=20 openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org" openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s` echo "priv key id = "$PRIV_KEY_ID PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s` echo "pub key id = "$PUB_KEY_ID keyctl pkey_query $PRIV_KEY_ID 0 keyctl pkey_query $PUB_KEY_ID 0 echo "Enc with priv key..." keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv echo "Dec with pub key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Sign with priv key..." keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig echo "Verify with pub key..." keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 echo "Enc with pub key..." keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub echo "Dec with priv key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Verify with pub key..." keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: lei he <helei.sig11@bytedance.com Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20220611064243.24535-2-pizhenwei@bytedance.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-11 09:42:43 +03:00
CryptoDevBackendOpInfo *op_info,
struct iovec *iov, unsigned int out_num)
{
VirtIODevice *vdev = VIRTIO_DEVICE(vcrypto);
crypto: Introduce RSA algorithm There are two parts in this patch: 1, support akcipher service by cryptodev-builtin driver 2, virtio-crypto driver supports akcipher service In principle, we should separate this into two patches, to avoid compiling error, merge them into one. Then virtio-crypto gets request from guest side, and forwards the request to builtin driver to handle it. Test with a guest linux: 1, The self-test framework of crypto layer works fine in guest kernel 2, Test with Linux guest(with asym support), the following script test(note that pkey_XXX is supported only in a newer version of keyutils): - both public key & private key - create/close session - encrypt/decrypt/sign/verify basic driver operation - also test with kernel crypto layer(pkey add/query) All the cases work fine. Run script in guest: rm -rf *.der *.pem *.pfx modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m rm -rf /tmp/data dd if=/dev/random of=/tmp/data count=1 bs=20 openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org" openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s` echo "priv key id = "$PRIV_KEY_ID PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s` echo "pub key id = "$PUB_KEY_ID keyctl pkey_query $PRIV_KEY_ID 0 keyctl pkey_query $PUB_KEY_ID 0 echo "Enc with priv key..." keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv echo "Dec with pub key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Sign with priv key..." keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig echo "Verify with pub key..." keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 echo "Enc with pub key..." keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub echo "Dec with priv key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Verify with pub key..." keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: lei he <helei.sig11@bytedance.com Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20220611064243.24535-2-pizhenwei@bytedance.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-11 09:42:43 +03:00
CryptoDevBackendSymOpInfo *sym_op_info;
uint32_t op_type;
op_type = ldl_le_p(&req->op_type);
if (op_type == VIRTIO_CRYPTO_SYM_OP_CIPHER) {
crypto: Introduce RSA algorithm There are two parts in this patch: 1, support akcipher service by cryptodev-builtin driver 2, virtio-crypto driver supports akcipher service In principle, we should separate this into two patches, to avoid compiling error, merge them into one. Then virtio-crypto gets request from guest side, and forwards the request to builtin driver to handle it. Test with a guest linux: 1, The self-test framework of crypto layer works fine in guest kernel 2, Test with Linux guest(with asym support), the following script test(note that pkey_XXX is supported only in a newer version of keyutils): - both public key & private key - create/close session - encrypt/decrypt/sign/verify basic driver operation - also test with kernel crypto layer(pkey add/query) All the cases work fine. Run script in guest: rm -rf *.der *.pem *.pfx modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m rm -rf /tmp/data dd if=/dev/random of=/tmp/data count=1 bs=20 openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org" openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s` echo "priv key id = "$PRIV_KEY_ID PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s` echo "pub key id = "$PUB_KEY_ID keyctl pkey_query $PRIV_KEY_ID 0 keyctl pkey_query $PUB_KEY_ID 0 echo "Enc with priv key..." keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv echo "Dec with pub key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Sign with priv key..." keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig echo "Verify with pub key..." keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 echo "Enc with pub key..." keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub echo "Dec with priv key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Verify with pub key..." keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: lei he <helei.sig11@bytedance.com Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20220611064243.24535-2-pizhenwei@bytedance.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-11 09:42:43 +03:00
sym_op_info = virtio_crypto_sym_op_helper(vdev, &req->u.cipher.para,
NULL, iov, out_num);
crypto: Introduce RSA algorithm There are two parts in this patch: 1, support akcipher service by cryptodev-builtin driver 2, virtio-crypto driver supports akcipher service In principle, we should separate this into two patches, to avoid compiling error, merge them into one. Then virtio-crypto gets request from guest side, and forwards the request to builtin driver to handle it. Test with a guest linux: 1, The self-test framework of crypto layer works fine in guest kernel 2, Test with Linux guest(with asym support), the following script test(note that pkey_XXX is supported only in a newer version of keyutils): - both public key & private key - create/close session - encrypt/decrypt/sign/verify basic driver operation - also test with kernel crypto layer(pkey add/query) All the cases work fine. Run script in guest: rm -rf *.der *.pem *.pfx modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m rm -rf /tmp/data dd if=/dev/random of=/tmp/data count=1 bs=20 openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org" openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s` echo "priv key id = "$PRIV_KEY_ID PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s` echo "pub key id = "$PUB_KEY_ID keyctl pkey_query $PRIV_KEY_ID 0 keyctl pkey_query $PUB_KEY_ID 0 echo "Enc with priv key..." keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv echo "Dec with pub key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Sign with priv key..." keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig echo "Verify with pub key..." keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 echo "Enc with pub key..." keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub echo "Dec with priv key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Verify with pub key..." keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: lei he <helei.sig11@bytedance.com Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20220611064243.24535-2-pizhenwei@bytedance.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-11 09:42:43 +03:00
if (!sym_op_info) {
return -EFAULT;
}
} else if (op_type == VIRTIO_CRYPTO_SYM_OP_ALGORITHM_CHAINING) {
crypto: Introduce RSA algorithm There are two parts in this patch: 1, support akcipher service by cryptodev-builtin driver 2, virtio-crypto driver supports akcipher service In principle, we should separate this into two patches, to avoid compiling error, merge them into one. Then virtio-crypto gets request from guest side, and forwards the request to builtin driver to handle it. Test with a guest linux: 1, The self-test framework of crypto layer works fine in guest kernel 2, Test with Linux guest(with asym support), the following script test(note that pkey_XXX is supported only in a newer version of keyutils): - both public key & private key - create/close session - encrypt/decrypt/sign/verify basic driver operation - also test with kernel crypto layer(pkey add/query) All the cases work fine. Run script in guest: rm -rf *.der *.pem *.pfx modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m rm -rf /tmp/data dd if=/dev/random of=/tmp/data count=1 bs=20 openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org" openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s` echo "priv key id = "$PRIV_KEY_ID PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s` echo "pub key id = "$PUB_KEY_ID keyctl pkey_query $PRIV_KEY_ID 0 keyctl pkey_query $PUB_KEY_ID 0 echo "Enc with priv key..." keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv echo "Dec with pub key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Sign with priv key..." keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig echo "Verify with pub key..." keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 echo "Enc with pub key..." keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub echo "Dec with priv key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Verify with pub key..." keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: lei he <helei.sig11@bytedance.com Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20220611064243.24535-2-pizhenwei@bytedance.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-11 09:42:43 +03:00
sym_op_info = virtio_crypto_sym_op_helper(vdev, NULL,
&req->u.chain.para,
iov, out_num);
crypto: Introduce RSA algorithm There are two parts in this patch: 1, support akcipher service by cryptodev-builtin driver 2, virtio-crypto driver supports akcipher service In principle, we should separate this into two patches, to avoid compiling error, merge them into one. Then virtio-crypto gets request from guest side, and forwards the request to builtin driver to handle it. Test with a guest linux: 1, The self-test framework of crypto layer works fine in guest kernel 2, Test with Linux guest(with asym support), the following script test(note that pkey_XXX is supported only in a newer version of keyutils): - both public key & private key - create/close session - encrypt/decrypt/sign/verify basic driver operation - also test with kernel crypto layer(pkey add/query) All the cases work fine. Run script in guest: rm -rf *.der *.pem *.pfx modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m rm -rf /tmp/data dd if=/dev/random of=/tmp/data count=1 bs=20 openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org" openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s` echo "priv key id = "$PRIV_KEY_ID PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s` echo "pub key id = "$PUB_KEY_ID keyctl pkey_query $PRIV_KEY_ID 0 keyctl pkey_query $PUB_KEY_ID 0 echo "Enc with priv key..." keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv echo "Dec with pub key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Sign with priv key..." keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig echo "Verify with pub key..." keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 echo "Enc with pub key..." keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub echo "Dec with priv key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Verify with pub key..." keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: lei he <helei.sig11@bytedance.com Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20220611064243.24535-2-pizhenwei@bytedance.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-11 09:42:43 +03:00
if (!sym_op_info) {
return -EFAULT;
}
} else {
/* VIRTIO_CRYPTO_SYM_OP_NONE */
error_report("virtio-crypto unsupported cipher type");
return -VIRTIO_CRYPTO_NOTSUPP;
}
crypto: Introduce RSA algorithm There are two parts in this patch: 1, support akcipher service by cryptodev-builtin driver 2, virtio-crypto driver supports akcipher service In principle, we should separate this into two patches, to avoid compiling error, merge them into one. Then virtio-crypto gets request from guest side, and forwards the request to builtin driver to handle it. Test with a guest linux: 1, The self-test framework of crypto layer works fine in guest kernel 2, Test with Linux guest(with asym support), the following script test(note that pkey_XXX is supported only in a newer version of keyutils): - both public key & private key - create/close session - encrypt/decrypt/sign/verify basic driver operation - also test with kernel crypto layer(pkey add/query) All the cases work fine. Run script in guest: rm -rf *.der *.pem *.pfx modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m rm -rf /tmp/data dd if=/dev/random of=/tmp/data count=1 bs=20 openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org" openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s` echo "priv key id = "$PRIV_KEY_ID PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s` echo "pub key id = "$PUB_KEY_ID keyctl pkey_query $PRIV_KEY_ID 0 keyctl pkey_query $PUB_KEY_ID 0 echo "Enc with priv key..." keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv echo "Dec with pub key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Sign with priv key..." keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig echo "Verify with pub key..." keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 echo "Enc with pub key..." keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub echo "Dec with priv key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Verify with pub key..." keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: lei he <helei.sig11@bytedance.com Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20220611064243.24535-2-pizhenwei@bytedance.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-11 09:42:43 +03:00
sym_op_info->op_type = op_type;
op_info->u.sym_op_info = sym_op_info;
return 0;
}
crypto: Introduce RSA algorithm There are two parts in this patch: 1, support akcipher service by cryptodev-builtin driver 2, virtio-crypto driver supports akcipher service In principle, we should separate this into two patches, to avoid compiling error, merge them into one. Then virtio-crypto gets request from guest side, and forwards the request to builtin driver to handle it. Test with a guest linux: 1, The self-test framework of crypto layer works fine in guest kernel 2, Test with Linux guest(with asym support), the following script test(note that pkey_XXX is supported only in a newer version of keyutils): - both public key & private key - create/close session - encrypt/decrypt/sign/verify basic driver operation - also test with kernel crypto layer(pkey add/query) All the cases work fine. Run script in guest: rm -rf *.der *.pem *.pfx modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m rm -rf /tmp/data dd if=/dev/random of=/tmp/data count=1 bs=20 openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org" openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s` echo "priv key id = "$PRIV_KEY_ID PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s` echo "pub key id = "$PUB_KEY_ID keyctl pkey_query $PRIV_KEY_ID 0 keyctl pkey_query $PUB_KEY_ID 0 echo "Enc with priv key..." keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv echo "Dec with pub key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Sign with priv key..." keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig echo "Verify with pub key..." keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 echo "Enc with pub key..." keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub echo "Dec with priv key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Verify with pub key..." keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: lei he <helei.sig11@bytedance.com Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20220611064243.24535-2-pizhenwei@bytedance.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-11 09:42:43 +03:00
static int
virtio_crypto_handle_asym_req(VirtIOCrypto *vcrypto,
struct virtio_crypto_akcipher_data_req *req,
CryptoDevBackendOpInfo *op_info,
struct iovec *iov, unsigned int out_num)
{
VirtIODevice *vdev = VIRTIO_DEVICE(vcrypto);
CryptoDevBackendAsymOpInfo *asym_op_info;
uint32_t src_len;
uint32_t dst_len;
uint32_t len;
uint8_t *src = NULL;
uint8_t *dst = NULL;
asym_op_info = g_new0(CryptoDevBackendAsymOpInfo, 1);
crypto: Introduce RSA algorithm There are two parts in this patch: 1, support akcipher service by cryptodev-builtin driver 2, virtio-crypto driver supports akcipher service In principle, we should separate this into two patches, to avoid compiling error, merge them into one. Then virtio-crypto gets request from guest side, and forwards the request to builtin driver to handle it. Test with a guest linux: 1, The self-test framework of crypto layer works fine in guest kernel 2, Test with Linux guest(with asym support), the following script test(note that pkey_XXX is supported only in a newer version of keyutils): - both public key & private key - create/close session - encrypt/decrypt/sign/verify basic driver operation - also test with kernel crypto layer(pkey add/query) All the cases work fine. Run script in guest: rm -rf *.der *.pem *.pfx modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m rm -rf /tmp/data dd if=/dev/random of=/tmp/data count=1 bs=20 openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org" openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s` echo "priv key id = "$PRIV_KEY_ID PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s` echo "pub key id = "$PUB_KEY_ID keyctl pkey_query $PRIV_KEY_ID 0 keyctl pkey_query $PUB_KEY_ID 0 echo "Enc with priv key..." keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv echo "Dec with pub key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Sign with priv key..." keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig echo "Verify with pub key..." keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 echo "Enc with pub key..." keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub echo "Dec with priv key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Verify with pub key..." keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: lei he <helei.sig11@bytedance.com Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20220611064243.24535-2-pizhenwei@bytedance.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-11 09:42:43 +03:00
src_len = ldl_le_p(&req->para.src_data_len);
dst_len = ldl_le_p(&req->para.dst_data_len);
if (src_len > 0) {
src = g_malloc0(src_len);
len = iov_to_buf(iov, out_num, 0, src, src_len);
if (unlikely(len != src_len)) {
virtio_error(vdev, "virtio-crypto asym src data incorrect"
"expected %u, actual %u", src_len, len);
goto err;
}
iov_discard_front(&iov, &out_num, src_len);
}
if (dst_len > 0) {
dst = g_malloc0(dst_len);
if (op_info->op_code == VIRTIO_CRYPTO_AKCIPHER_VERIFY) {
len = iov_to_buf(iov, out_num, 0, dst, dst_len);
if (unlikely(len != dst_len)) {
virtio_error(vdev, "virtio-crypto asym dst data incorrect"
"expected %u, actual %u", dst_len, len);
goto err;
}
iov_discard_front(&iov, &out_num, dst_len);
}
}
asym_op_info->src_len = src_len;
asym_op_info->dst_len = dst_len;
asym_op_info->src = src;
asym_op_info->dst = dst;
op_info->u.asym_op_info = asym_op_info;
return 0;
err:
g_free(asym_op_info);
g_free(src);
g_free(dst);
return -EFAULT;
}
static int
virtio_crypto_handle_request(VirtIOCryptoReq *request)
{
VirtIOCrypto *vcrypto = request->vcrypto;
VirtIODevice *vdev = VIRTIO_DEVICE(vcrypto);
VirtQueueElement *elem = &request->elem;
int queue_index = virtio_crypto_vq2q(virtio_get_queue_index(request->vq));
struct virtio_crypto_op_data_req req;
int ret;
g_autofree struct iovec *in_iov_copy = NULL;
g_autofree struct iovec *out_iov_copy = NULL;
struct iovec *in_iov;
struct iovec *out_iov;
unsigned in_num;
unsigned out_num;
uint32_t opcode;
crypto: Introduce RSA algorithm There are two parts in this patch: 1, support akcipher service by cryptodev-builtin driver 2, virtio-crypto driver supports akcipher service In principle, we should separate this into two patches, to avoid compiling error, merge them into one. Then virtio-crypto gets request from guest side, and forwards the request to builtin driver to handle it. Test with a guest linux: 1, The self-test framework of crypto layer works fine in guest kernel 2, Test with Linux guest(with asym support), the following script test(note that pkey_XXX is supported only in a newer version of keyutils): - both public key & private key - create/close session - encrypt/decrypt/sign/verify basic driver operation - also test with kernel crypto layer(pkey add/query) All the cases work fine. Run script in guest: rm -rf *.der *.pem *.pfx modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m rm -rf /tmp/data dd if=/dev/random of=/tmp/data count=1 bs=20 openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org" openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s` echo "priv key id = "$PRIV_KEY_ID PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s` echo "pub key id = "$PUB_KEY_ID keyctl pkey_query $PRIV_KEY_ID 0 keyctl pkey_query $PUB_KEY_ID 0 echo "Enc with priv key..." keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv echo "Dec with pub key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Sign with priv key..." keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig echo "Verify with pub key..." keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 echo "Enc with pub key..." keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub echo "Dec with priv key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Verify with pub key..." keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: lei he <helei.sig11@bytedance.com Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20220611064243.24535-2-pizhenwei@bytedance.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-11 09:42:43 +03:00
CryptoDevBackendOpInfo *op_info = &request->op_info;
if (elem->out_num < 1 || elem->in_num < 1) {
virtio_error(vdev, "virtio-crypto dataq missing headers");
return -1;
}
out_num = elem->out_num;
out_iov_copy = g_memdup2(elem->out_sg, sizeof(out_iov[0]) * out_num);
out_iov = out_iov_copy;
in_num = elem->in_num;
in_iov_copy = g_memdup2(elem->in_sg, sizeof(in_iov[0]) * in_num);
in_iov = in_iov_copy;
if (unlikely(iov_to_buf(out_iov, out_num, 0, &req, sizeof(req))
!= sizeof(req))) {
virtio_error(vdev, "virtio-crypto request outhdr too short");
return -1;
}
iov_discard_front(&out_iov, &out_num, sizeof(req));
if (in_iov[in_num - 1].iov_len <
sizeof(struct virtio_crypto_inhdr)) {
virtio_error(vdev, "virtio-crypto request inhdr too short");
return -1;
}
/* We always touch the last byte, so just see how big in_iov is. */
request->in_len = iov_size(in_iov, in_num);
request->in = (void *)in_iov[in_num - 1].iov_base
+ in_iov[in_num - 1].iov_len
- sizeof(struct virtio_crypto_inhdr);
iov_discard_back(in_iov, &in_num, sizeof(struct virtio_crypto_inhdr));
/*
* The length of operation result, including dest_data
* and digest_result if exists.
*/
request->in_num = in_num;
request->in_iov = in_iov;
/* now, we free the in_iov_copy inside virtio_crypto_free_request */
in_iov_copy = NULL;
opcode = ldl_le_p(&req.header.opcode);
crypto: Introduce RSA algorithm There are two parts in this patch: 1, support akcipher service by cryptodev-builtin driver 2, virtio-crypto driver supports akcipher service In principle, we should separate this into two patches, to avoid compiling error, merge them into one. Then virtio-crypto gets request from guest side, and forwards the request to builtin driver to handle it. Test with a guest linux: 1, The self-test framework of crypto layer works fine in guest kernel 2, Test with Linux guest(with asym support), the following script test(note that pkey_XXX is supported only in a newer version of keyutils): - both public key & private key - create/close session - encrypt/decrypt/sign/verify basic driver operation - also test with kernel crypto layer(pkey add/query) All the cases work fine. Run script in guest: rm -rf *.der *.pem *.pfx modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m rm -rf /tmp/data dd if=/dev/random of=/tmp/data count=1 bs=20 openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org" openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s` echo "priv key id = "$PRIV_KEY_ID PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s` echo "pub key id = "$PUB_KEY_ID keyctl pkey_query $PRIV_KEY_ID 0 keyctl pkey_query $PUB_KEY_ID 0 echo "Enc with priv key..." keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv echo "Dec with pub key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Sign with priv key..." keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig echo "Verify with pub key..." keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 echo "Enc with pub key..." keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub echo "Dec with priv key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Verify with pub key..." keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: lei he <helei.sig11@bytedance.com Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20220611064243.24535-2-pizhenwei@bytedance.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-11 09:42:43 +03:00
op_info->session_id = ldq_le_p(&req.header.session_id);
op_info->op_code = opcode;
switch (opcode) {
case VIRTIO_CRYPTO_CIPHER_ENCRYPT:
case VIRTIO_CRYPTO_CIPHER_DECRYPT:
op_info->algtype = request->flags = QCRYPTODEV_BACKEND_ALG_SYM;
ret = virtio_crypto_handle_sym_req(vcrypto,
crypto: Introduce RSA algorithm There are two parts in this patch: 1, support akcipher service by cryptodev-builtin driver 2, virtio-crypto driver supports akcipher service In principle, we should separate this into two patches, to avoid compiling error, merge them into one. Then virtio-crypto gets request from guest side, and forwards the request to builtin driver to handle it. Test with a guest linux: 1, The self-test framework of crypto layer works fine in guest kernel 2, Test with Linux guest(with asym support), the following script test(note that pkey_XXX is supported only in a newer version of keyutils): - both public key & private key - create/close session - encrypt/decrypt/sign/verify basic driver operation - also test with kernel crypto layer(pkey add/query) All the cases work fine. Run script in guest: rm -rf *.der *.pem *.pfx modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m rm -rf /tmp/data dd if=/dev/random of=/tmp/data count=1 bs=20 openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org" openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s` echo "priv key id = "$PRIV_KEY_ID PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s` echo "pub key id = "$PUB_KEY_ID keyctl pkey_query $PRIV_KEY_ID 0 keyctl pkey_query $PUB_KEY_ID 0 echo "Enc with priv key..." keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv echo "Dec with pub key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Sign with priv key..." keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig echo "Verify with pub key..." keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 echo "Enc with pub key..." keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub echo "Dec with priv key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Verify with pub key..." keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: lei he <helei.sig11@bytedance.com Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20220611064243.24535-2-pizhenwei@bytedance.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-11 09:42:43 +03:00
&req.u.sym_req, op_info,
out_iov, out_num);
goto check_result;
case VIRTIO_CRYPTO_AKCIPHER_ENCRYPT:
case VIRTIO_CRYPTO_AKCIPHER_DECRYPT:
case VIRTIO_CRYPTO_AKCIPHER_SIGN:
case VIRTIO_CRYPTO_AKCIPHER_VERIFY:
op_info->algtype = request->flags = QCRYPTODEV_BACKEND_ALG_ASYM;
crypto: Introduce RSA algorithm There are two parts in this patch: 1, support akcipher service by cryptodev-builtin driver 2, virtio-crypto driver supports akcipher service In principle, we should separate this into two patches, to avoid compiling error, merge them into one. Then virtio-crypto gets request from guest side, and forwards the request to builtin driver to handle it. Test with a guest linux: 1, The self-test framework of crypto layer works fine in guest kernel 2, Test with Linux guest(with asym support), the following script test(note that pkey_XXX is supported only in a newer version of keyutils): - both public key & private key - create/close session - encrypt/decrypt/sign/verify basic driver operation - also test with kernel crypto layer(pkey add/query) All the cases work fine. Run script in guest: rm -rf *.der *.pem *.pfx modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m rm -rf /tmp/data dd if=/dev/random of=/tmp/data count=1 bs=20 openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org" openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s` echo "priv key id = "$PRIV_KEY_ID PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s` echo "pub key id = "$PUB_KEY_ID keyctl pkey_query $PRIV_KEY_ID 0 keyctl pkey_query $PUB_KEY_ID 0 echo "Enc with priv key..." keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv echo "Dec with pub key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Sign with priv key..." keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig echo "Verify with pub key..." keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 echo "Enc with pub key..." keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub echo "Dec with priv key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Verify with pub key..." keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: lei he <helei.sig11@bytedance.com Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20220611064243.24535-2-pizhenwei@bytedance.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-11 09:42:43 +03:00
ret = virtio_crypto_handle_asym_req(vcrypto,
&req.u.akcipher_req, op_info,
out_iov, out_num);
crypto: Introduce RSA algorithm There are two parts in this patch: 1, support akcipher service by cryptodev-builtin driver 2, virtio-crypto driver supports akcipher service In principle, we should separate this into two patches, to avoid compiling error, merge them into one. Then virtio-crypto gets request from guest side, and forwards the request to builtin driver to handle it. Test with a guest linux: 1, The self-test framework of crypto layer works fine in guest kernel 2, Test with Linux guest(with asym support), the following script test(note that pkey_XXX is supported only in a newer version of keyutils): - both public key & private key - create/close session - encrypt/decrypt/sign/verify basic driver operation - also test with kernel crypto layer(pkey add/query) All the cases work fine. Run script in guest: rm -rf *.der *.pem *.pfx modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m rm -rf /tmp/data dd if=/dev/random of=/tmp/data count=1 bs=20 openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org" openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s` echo "priv key id = "$PRIV_KEY_ID PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s` echo "pub key id = "$PUB_KEY_ID keyctl pkey_query $PRIV_KEY_ID 0 keyctl pkey_query $PUB_KEY_ID 0 echo "Enc with priv key..." keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv echo "Dec with pub key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Sign with priv key..." keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig echo "Verify with pub key..." keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 echo "Enc with pub key..." keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub echo "Dec with priv key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Verify with pub key..." keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: lei he <helei.sig11@bytedance.com Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20220611064243.24535-2-pizhenwei@bytedance.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-11 09:42:43 +03:00
check_result:
/* Serious errors, need to reset virtio crypto device */
if (ret == -EFAULT) {
return -1;
} else if (ret == -VIRTIO_CRYPTO_NOTSUPP) {
virtio_crypto_req_complete(request, -VIRTIO_CRYPTO_NOTSUPP);
} else {
ret = cryptodev_backend_crypto_operation(vcrypto->cryptodev,
request, queue_index,
virtio_crypto_req_complete,
request);
if (ret < 0) {
virtio_crypto_req_complete(request, ret);
}
}
break;
crypto: Introduce RSA algorithm There are two parts in this patch: 1, support akcipher service by cryptodev-builtin driver 2, virtio-crypto driver supports akcipher service In principle, we should separate this into two patches, to avoid compiling error, merge them into one. Then virtio-crypto gets request from guest side, and forwards the request to builtin driver to handle it. Test with a guest linux: 1, The self-test framework of crypto layer works fine in guest kernel 2, Test with Linux guest(with asym support), the following script test(note that pkey_XXX is supported only in a newer version of keyutils): - both public key & private key - create/close session - encrypt/decrypt/sign/verify basic driver operation - also test with kernel crypto layer(pkey add/query) All the cases work fine. Run script in guest: rm -rf *.der *.pem *.pfx modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m rm -rf /tmp/data dd if=/dev/random of=/tmp/data count=1 bs=20 openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org" openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s` echo "priv key id = "$PRIV_KEY_ID PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s` echo "pub key id = "$PUB_KEY_ID keyctl pkey_query $PRIV_KEY_ID 0 keyctl pkey_query $PUB_KEY_ID 0 echo "Enc with priv key..." keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv echo "Dec with pub key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Sign with priv key..." keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig echo "Verify with pub key..." keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 echo "Enc with pub key..." keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub echo "Dec with priv key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Verify with pub key..." keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: lei he <helei.sig11@bytedance.com Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20220611064243.24535-2-pizhenwei@bytedance.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-11 09:42:43 +03:00
case VIRTIO_CRYPTO_HASH:
case VIRTIO_CRYPTO_MAC:
case VIRTIO_CRYPTO_AEAD_ENCRYPT:
case VIRTIO_CRYPTO_AEAD_DECRYPT:
default:
error_report("virtio-crypto unsupported dataq opcode: %u",
opcode);
virtio_crypto_req_complete(request, -VIRTIO_CRYPTO_NOTSUPP);
}
return 0;
}
static void virtio_crypto_handle_dataq(VirtIODevice *vdev, VirtQueue *vq)
{
VirtIOCrypto *vcrypto = VIRTIO_CRYPTO(vdev);
VirtIOCryptoReq *req;
while ((req = virtio_crypto_get_request(vcrypto, vq))) {
if (virtio_crypto_handle_request(req) < 0) {
virtqueue_detach_element(req->vq, &req->elem, 0);
virtio_crypto_free_request(req);
break;
}
}
}
static void virtio_crypto_dataq_bh(void *opaque)
{
VirtIOCryptoQueue *q = opaque;
VirtIOCrypto *vcrypto = q->vcrypto;
VirtIODevice *vdev = VIRTIO_DEVICE(vcrypto);
/* This happens when device was stopped but BH wasn't. */
if (!vdev->vm_running) {
return;
}
/* Just in case the driver is not ready on more */
if (unlikely(!(vdev->status & VIRTIO_CONFIG_S_DRIVER_OK))) {
return;
}
for (;;) {
virtio_crypto_handle_dataq(vdev, q->dataq);
virtio_queue_set_notification(q->dataq, 1);
/* Are we done or did the guest add more buffers? */
if (virtio_queue_empty(q->dataq)) {
break;
}
virtio_queue_set_notification(q->dataq, 0);
}
}
static void
virtio_crypto_handle_dataq_bh(VirtIODevice *vdev, VirtQueue *vq)
{
VirtIOCrypto *vcrypto = VIRTIO_CRYPTO(vdev);
VirtIOCryptoQueue *q =
&vcrypto->vqs[virtio_crypto_vq2q(virtio_get_queue_index(vq))];
/* This happens when device was stopped but VCPU wasn't. */
if (!vdev->vm_running) {
return;
}
virtio_queue_set_notification(vq, 0);
qemu_bh_schedule(q->dataq_bh);
}
static uint64_t virtio_crypto_get_features(VirtIODevice *vdev,
uint64_t features,
Error **errp)
{
return features;
}
static void virtio_crypto_reset(VirtIODevice *vdev)
{
VirtIOCrypto *vcrypto = VIRTIO_CRYPTO(vdev);
/* multiqueue is disabled by default */
vcrypto->curr_queues = 1;
if (!cryptodev_backend_is_ready(vcrypto->cryptodev)) {
vcrypto->status &= ~VIRTIO_CRYPTO_S_HW_READY;
} else {
vcrypto->status |= VIRTIO_CRYPTO_S_HW_READY;
}
}
static uint32_t virtio_crypto_init_services(uint32_t qservices)
{
uint32_t vservices = 0;
if (qservices & (1 << QCRYPTODEV_BACKEND_SERVICE_CIPHER)) {
vservices |= (1 << VIRTIO_CRYPTO_SERVICE_CIPHER);
}
if (qservices & (1 << QCRYPTODEV_BACKEND_SERVICE_HASH)) {
vservices |= (1 << VIRTIO_CRYPTO_SERVICE_HASH);
}
if (qservices & (1 << QCRYPTODEV_BACKEND_SERVICE_MAC)) {
vservices |= (1 << VIRTIO_CRYPTO_SERVICE_MAC);
}
if (qservices & (1 << QCRYPTODEV_BACKEND_SERVICE_AEAD)) {
vservices |= (1 << VIRTIO_CRYPTO_SERVICE_AEAD);
}
if (qservices & (1 << QCRYPTODEV_BACKEND_SERVICE_AKCIPHER)) {
vservices |= (1 << VIRTIO_CRYPTO_SERVICE_AKCIPHER);
}
return vservices;
}
static void virtio_crypto_init_config(VirtIODevice *vdev)
{
VirtIOCrypto *vcrypto = VIRTIO_CRYPTO(vdev);
vcrypto->conf.crypto_services = virtio_crypto_init_services(
vcrypto->conf.cryptodev->conf.crypto_services);
vcrypto->conf.cipher_algo_l =
vcrypto->conf.cryptodev->conf.cipher_algo_l;
vcrypto->conf.cipher_algo_h =
vcrypto->conf.cryptodev->conf.cipher_algo_h;
vcrypto->conf.hash_algo = vcrypto->conf.cryptodev->conf.hash_algo;
vcrypto->conf.mac_algo_l = vcrypto->conf.cryptodev->conf.mac_algo_l;
vcrypto->conf.mac_algo_h = vcrypto->conf.cryptodev->conf.mac_algo_h;
vcrypto->conf.aead_algo = vcrypto->conf.cryptodev->conf.aead_algo;
crypto: Introduce RSA algorithm There are two parts in this patch: 1, support akcipher service by cryptodev-builtin driver 2, virtio-crypto driver supports akcipher service In principle, we should separate this into two patches, to avoid compiling error, merge them into one. Then virtio-crypto gets request from guest side, and forwards the request to builtin driver to handle it. Test with a guest linux: 1, The self-test framework of crypto layer works fine in guest kernel 2, Test with Linux guest(with asym support), the following script test(note that pkey_XXX is supported only in a newer version of keyutils): - both public key & private key - create/close session - encrypt/decrypt/sign/verify basic driver operation - also test with kernel crypto layer(pkey add/query) All the cases work fine. Run script in guest: rm -rf *.der *.pem *.pfx modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m rm -rf /tmp/data dd if=/dev/random of=/tmp/data count=1 bs=20 openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org" openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s` echo "priv key id = "$PRIV_KEY_ID PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s` echo "pub key id = "$PUB_KEY_ID keyctl pkey_query $PRIV_KEY_ID 0 keyctl pkey_query $PUB_KEY_ID 0 echo "Enc with priv key..." keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv echo "Dec with pub key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Sign with priv key..." keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig echo "Verify with pub key..." keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 echo "Enc with pub key..." keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub echo "Dec with priv key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Verify with pub key..." keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: lei he <helei.sig11@bytedance.com Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20220611064243.24535-2-pizhenwei@bytedance.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-11 09:42:43 +03:00
vcrypto->conf.akcipher_algo = vcrypto->conf.cryptodev->conf.akcipher_algo;
vcrypto->conf.max_cipher_key_len =
vcrypto->conf.cryptodev->conf.max_cipher_key_len;
vcrypto->conf.max_auth_key_len =
vcrypto->conf.cryptodev->conf.max_auth_key_len;
vcrypto->conf.max_size = vcrypto->conf.cryptodev->conf.max_size;
}
static void virtio_crypto_device_realize(DeviceState *dev, Error **errp)
{
VirtIODevice *vdev = VIRTIO_DEVICE(dev);
VirtIOCrypto *vcrypto = VIRTIO_CRYPTO(dev);
int i;
vcrypto->cryptodev = vcrypto->conf.cryptodev;
if (vcrypto->cryptodev == NULL) {
error_setg(errp, "'cryptodev' parameter expects a valid object");
return;
} else if (cryptodev_backend_is_used(vcrypto->cryptodev)) {
error_setg(errp, "can't use already used cryptodev backend: %s",
object_get_canonical_path_component(OBJECT(vcrypto->conf.cryptodev)));
return;
}
vcrypto->max_queues = MAX(vcrypto->cryptodev->conf.peers.queues, 1);
if (vcrypto->max_queues + 1 > VIRTIO_QUEUE_MAX) {
error_setg(errp, "Invalid number of queues (= %" PRIu32 "), "
"must be a positive integer less than %d.",
vcrypto->max_queues, VIRTIO_QUEUE_MAX);
return;
}
virtio_init(vdev, VIRTIO_ID_CRYPTO, vcrypto->config_size);
vcrypto->curr_queues = 1;
vcrypto->vqs = g_new0(VirtIOCryptoQueue, vcrypto->max_queues);
for (i = 0; i < vcrypto->max_queues; i++) {
vcrypto->vqs[i].dataq =
virtio_add_queue(vdev, 1024, virtio_crypto_handle_dataq_bh);
vcrypto->vqs[i].dataq_bh =
qemu_bh_new(virtio_crypto_dataq_bh, &vcrypto->vqs[i]);
vcrypto->vqs[i].vcrypto = vcrypto;
}
vcrypto->ctrl_vq = virtio_add_queue(vdev, 1024, virtio_crypto_handle_ctrl);
if (!cryptodev_backend_is_ready(vcrypto->cryptodev)) {
vcrypto->status &= ~VIRTIO_CRYPTO_S_HW_READY;
} else {
vcrypto->status |= VIRTIO_CRYPTO_S_HW_READY;
}
virtio_crypto_init_config(vdev);
cryptodev_backend_set_used(vcrypto->cryptodev, true);
}
qdev: Unrealize must not fail Devices may have component devices and buses. Device realization may fail. Realization is recursive: a device's realize() method realizes its components, and device_set_realized() realizes its buses (which should in turn realize the devices on that bus, except bus_set_realized() doesn't implement that, yet). When realization of a component or bus fails, we need to roll back: unrealize everything we realized so far. If any of these unrealizes failed, the device would be left in an inconsistent state. Must not happen. device_set_realized() lets it happen: it ignores errors in the roll back code starting at label child_realize_fail. Since realization is recursive, unrealization must be recursive, too. But how could a partly failed unrealize be rolled back? We'd have to re-realize, which can fail. This design is fundamentally broken. device_set_realized() does not roll back at all. Instead, it keeps unrealizing, ignoring further errors. It can screw up even for a device with no buses: if the lone dc->unrealize() fails, it still unregisters vmstate, and calls listeners' unrealize() callback. bus_set_realized() does not roll back either. Instead, it stops unrealizing. Fortunately, no unrealize method can fail, as we'll see below. To fix the design error, drop parameter @errp from all the unrealize methods. Any unrealize method that uses @errp now needs an update. This leads us to unrealize() methods that can fail. Merely passing it to another unrealize method cannot cause failure, though. Here are the ones that do other things with @errp: * virtio_serial_device_unrealize() Fails when qbus_set_hotplug_handler() fails, but still does all the other work. On failure, the device would stay realized with its resources completely gone. Oops. Can't happen, because qbus_set_hotplug_handler() can't actually fail here. Pass &error_abort to qbus_set_hotplug_handler() instead. * hw/ppc/spapr_drc.c's unrealize() Fails when object_property_del() fails, but all the other work is already done. On failure, the device would stay realized with its vmstate registration gone. Oops. Can't happen, because object_property_del() can't actually fail here. Pass &error_abort to object_property_del() instead. * spapr_phb_unrealize() Fails and bails out when remove_drcs() fails, but other work is already done. On failure, the device would stay realized with some of its resources gone. Oops. remove_drcs() fails only when chassis_from_bus()'s object_property_get_uint() fails, and it can't here. Pass &error_abort to remove_drcs() instead. Therefore, no unrealize method can fail before this patch. device_set_realized()'s recursive unrealization via bus uses object_property_set_bool(). Can't drop @errp there, so pass &error_abort. We similarly unrealize with object_property_set_bool() elsewhere, always ignoring errors. Pass &error_abort instead. Several unrealize methods no longer handle errors from other unrealize methods: virtio_9p_device_unrealize(), virtio_input_device_unrealize(), scsi_qdev_unrealize(), ... Much of the deleted error handling looks wrong anyway. One unrealize methods no longer ignore such errors: usb_ehci_pci_exit(). Several realize methods no longer ignore errors when rolling back: v9fs_device_realize_common(), pci_qdev_unrealize(), spapr_phb_realize(), usb_qdev_realize(), vfio_ccw_realize(), virtio_device_realize(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-17-armbru@redhat.com>
2020-05-05 18:29:24 +03:00
static void virtio_crypto_device_unrealize(DeviceState *dev)
{
VirtIODevice *vdev = VIRTIO_DEVICE(dev);
VirtIOCrypto *vcrypto = VIRTIO_CRYPTO(dev);
VirtIOCryptoQueue *q;
int i, max_queues;
max_queues = vcrypto->multiqueue ? vcrypto->max_queues : 1;
for (i = 0; i < max_queues; i++) {
virtio-crypto: do delete ctrl_vq in virtio_crypto_device_unrealize Similar to other virtio-deivces, ctrl_vq forgot to delete in virtio_crypto_device_unrealize, this patch fix it. This device has aleardy maintained vq pointers. Thus, we use the new virtio_delete_queue function directly to do the cleanup. The leak stack: Direct leak of 10752 byte(s) in 3 object(s) allocated from: #0 0x7f4c024b1970 in __interceptor_calloc (/lib64/libasan.so.5+0xef970) #1 0x7f4c018be49d in g_malloc0 (/lib64/libglib-2.0.so.0+0x5249d) #2 0x55a2f8017279 in virtio_add_queue /mnt/sdb/qemu-new/qemu_test/qemu/hw/virtio/virtio.c:2333 #3 0x55a2f8057035 in virtio_crypto_device_realize /mnt/sdb/qemu-new/qemu_test/qemu/hw/virtio/virtio-crypto.c:814 #4 0x55a2f8005d80 in virtio_device_realize /mnt/sdb/qemu-new/qemu_test/qemu/hw/virtio/virtio.c:3531 #5 0x55a2f8497d1b in device_set_realized /mnt/sdb/qemu-new/qemu_test/qemu/hw/core/qdev.c:891 #6 0x55a2f8b48595 in property_set_bool /mnt/sdb/qemu-new/qemu_test/qemu/qom/object.c:2238 #7 0x55a2f8b54fad in object_property_set_qobject /mnt/sdb/qemu-new/qemu_test/qemu/qom/qom-qobject.c:26 #8 0x55a2f8b4de2c in object_property_set_bool /mnt/sdb/qemu-new/qemu_test/qemu/qom/object.c:1390 #9 0x55a2f80609c9 in virtio_crypto_pci_realize /mnt/sdb/qemu-new/qemu_test/qemu/hw/virtio/virtio-crypto-pci.c:58 Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com> Cc: "Gonglei (Arei)" <arei.gonglei@huawei.com> Message-Id: <20200225075554.10835-5-pannengyuan@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-02-25 10:55:54 +03:00
virtio_delete_queue(vcrypto->vqs[i].dataq);
q = &vcrypto->vqs[i];
qemu_bh_delete(q->dataq_bh);
}
g_free(vcrypto->vqs);
virtio-crypto: do delete ctrl_vq in virtio_crypto_device_unrealize Similar to other virtio-deivces, ctrl_vq forgot to delete in virtio_crypto_device_unrealize, this patch fix it. This device has aleardy maintained vq pointers. Thus, we use the new virtio_delete_queue function directly to do the cleanup. The leak stack: Direct leak of 10752 byte(s) in 3 object(s) allocated from: #0 0x7f4c024b1970 in __interceptor_calloc (/lib64/libasan.so.5+0xef970) #1 0x7f4c018be49d in g_malloc0 (/lib64/libglib-2.0.so.0+0x5249d) #2 0x55a2f8017279 in virtio_add_queue /mnt/sdb/qemu-new/qemu_test/qemu/hw/virtio/virtio.c:2333 #3 0x55a2f8057035 in virtio_crypto_device_realize /mnt/sdb/qemu-new/qemu_test/qemu/hw/virtio/virtio-crypto.c:814 #4 0x55a2f8005d80 in virtio_device_realize /mnt/sdb/qemu-new/qemu_test/qemu/hw/virtio/virtio.c:3531 #5 0x55a2f8497d1b in device_set_realized /mnt/sdb/qemu-new/qemu_test/qemu/hw/core/qdev.c:891 #6 0x55a2f8b48595 in property_set_bool /mnt/sdb/qemu-new/qemu_test/qemu/qom/object.c:2238 #7 0x55a2f8b54fad in object_property_set_qobject /mnt/sdb/qemu-new/qemu_test/qemu/qom/qom-qobject.c:26 #8 0x55a2f8b4de2c in object_property_set_bool /mnt/sdb/qemu-new/qemu_test/qemu/qom/object.c:1390 #9 0x55a2f80609c9 in virtio_crypto_pci_realize /mnt/sdb/qemu-new/qemu_test/qemu/hw/virtio/virtio-crypto-pci.c:58 Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com> Cc: "Gonglei (Arei)" <arei.gonglei@huawei.com> Message-Id: <20200225075554.10835-5-pannengyuan@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-02-25 10:55:54 +03:00
virtio_delete_queue(vcrypto->ctrl_vq);
virtio_cleanup(vdev);
cryptodev_backend_set_used(vcrypto->cryptodev, false);
}
static const VMStateDescription vmstate_virtio_crypto = {
.name = "virtio-crypto",
.unmigratable = 1,
.minimum_version_id = VIRTIO_CRYPTO_VM_VERSION,
.version_id = VIRTIO_CRYPTO_VM_VERSION,
.fields = (VMStateField[]) {
VMSTATE_VIRTIO_DEVICE,
VMSTATE_END_OF_LIST()
},
};
static Property virtio_crypto_properties[] = {
DEFINE_PROP_LINK("cryptodev", VirtIOCrypto, conf.cryptodev,
TYPE_CRYPTODEV_BACKEND, CryptoDevBackend *),
DEFINE_PROP_END_OF_LIST(),
};
static void virtio_crypto_get_config(VirtIODevice *vdev, uint8_t *config)
{
VirtIOCrypto *c = VIRTIO_CRYPTO(vdev);
struct virtio_crypto_config crypto_cfg = {};
/*
* Virtio-crypto device conforms to VIRTIO 1.0 which is always LE,
* so we can use LE accessors directly.
*/
stl_le_p(&crypto_cfg.status, c->status);
stl_le_p(&crypto_cfg.max_dataqueues, c->max_queues);
stl_le_p(&crypto_cfg.crypto_services, c->conf.crypto_services);
stl_le_p(&crypto_cfg.cipher_algo_l, c->conf.cipher_algo_l);
stl_le_p(&crypto_cfg.cipher_algo_h, c->conf.cipher_algo_h);
stl_le_p(&crypto_cfg.hash_algo, c->conf.hash_algo);
stl_le_p(&crypto_cfg.mac_algo_l, c->conf.mac_algo_l);
stl_le_p(&crypto_cfg.mac_algo_h, c->conf.mac_algo_h);
stl_le_p(&crypto_cfg.aead_algo, c->conf.aead_algo);
stl_le_p(&crypto_cfg.max_cipher_key_len, c->conf.max_cipher_key_len);
stl_le_p(&crypto_cfg.max_auth_key_len, c->conf.max_auth_key_len);
stq_le_p(&crypto_cfg.max_size, c->conf.max_size);
crypto: Introduce RSA algorithm There are two parts in this patch: 1, support akcipher service by cryptodev-builtin driver 2, virtio-crypto driver supports akcipher service In principle, we should separate this into two patches, to avoid compiling error, merge them into one. Then virtio-crypto gets request from guest side, and forwards the request to builtin driver to handle it. Test with a guest linux: 1, The self-test framework of crypto layer works fine in guest kernel 2, Test with Linux guest(with asym support), the following script test(note that pkey_XXX is supported only in a newer version of keyutils): - both public key & private key - create/close session - encrypt/decrypt/sign/verify basic driver operation - also test with kernel crypto layer(pkey add/query) All the cases work fine. Run script in guest: rm -rf *.der *.pem *.pfx modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m rm -rf /tmp/data dd if=/dev/random of=/tmp/data count=1 bs=20 openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org" openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s` echo "priv key id = "$PRIV_KEY_ID PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s` echo "pub key id = "$PUB_KEY_ID keyctl pkey_query $PRIV_KEY_ID 0 keyctl pkey_query $PUB_KEY_ID 0 echo "Enc with priv key..." keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv echo "Dec with pub key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Sign with priv key..." keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig echo "Verify with pub key..." keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 echo "Enc with pub key..." keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub echo "Dec with priv key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Verify with pub key..." keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: lei he <helei.sig11@bytedance.com Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20220611064243.24535-2-pizhenwei@bytedance.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-11 09:42:43 +03:00
stl_le_p(&crypto_cfg.akcipher_algo, c->conf.akcipher_algo);
memcpy(config, &crypto_cfg, c->config_size);
}
static bool virtio_crypto_started(VirtIOCrypto *c, uint8_t status)
{
VirtIODevice *vdev = VIRTIO_DEVICE(c);
return (status & VIRTIO_CONFIG_S_DRIVER_OK) &&
(c->status & VIRTIO_CRYPTO_S_HW_READY) && vdev->vm_running;
}
static void virtio_crypto_vhost_status(VirtIOCrypto *c, uint8_t status)
{
VirtIODevice *vdev = VIRTIO_DEVICE(c);
int queues = c->multiqueue ? c->max_queues : 1;
CryptoDevBackend *b = c->cryptodev;
CryptoDevBackendClient *cc = b->conf.peers.ccs[0];
if (!cryptodev_get_vhost(cc, b, 0)) {
return;
}
if ((virtio_crypto_started(c, status)) == !!c->vhost_started) {
return;
}
if (!c->vhost_started) {
int r;
c->vhost_started = 1;
r = cryptodev_vhost_start(vdev, queues);
if (r < 0) {
error_report("unable to start vhost crypto: %d: "
"falling back on userspace virtio", -r);
c->vhost_started = 0;
}
} else {
cryptodev_vhost_stop(vdev, queues);
c->vhost_started = 0;
}
}
static void virtio_crypto_set_status(VirtIODevice *vdev, uint8_t status)
{
VirtIOCrypto *vcrypto = VIRTIO_CRYPTO(vdev);
virtio_crypto_vhost_status(vcrypto, status);
}
static void virtio_crypto_guest_notifier_mask(VirtIODevice *vdev, int idx,
bool mask)
{
VirtIOCrypto *vcrypto = VIRTIO_CRYPTO(vdev);
int queue = virtio_crypto_vq2q(idx);
assert(vcrypto->vhost_started);
/*
* Add the check for configure interrupt, Use VIRTIO_CONFIG_IRQ_IDX -1
* as the Marco of configure interrupt's IDX, If this driver does not
* support, the function will return
*/
if (idx == VIRTIO_CONFIG_IRQ_IDX) {
return;
}
cryptodev_vhost_virtqueue_mask(vdev, queue, idx, mask);
}
static bool virtio_crypto_guest_notifier_pending(VirtIODevice *vdev, int idx)
{
VirtIOCrypto *vcrypto = VIRTIO_CRYPTO(vdev);
int queue = virtio_crypto_vq2q(idx);
assert(vcrypto->vhost_started);
/*
* Add the check for configure interrupt, Use VIRTIO_CONFIG_IRQ_IDX -1
* as the Marco of configure interrupt's IDX, If this driver does not
* support, the function will return
*/
if (idx == VIRTIO_CONFIG_IRQ_IDX) {
return false;
}
return cryptodev_vhost_virtqueue_pending(vdev, queue, idx);
}
static struct vhost_dev *virtio_crypto_get_vhost(VirtIODevice *vdev)
{
VirtIOCrypto *vcrypto = VIRTIO_CRYPTO(vdev);
CryptoDevBackend *b = vcrypto->cryptodev;
CryptoDevBackendClient *cc = b->conf.peers.ccs[0];
CryptoDevBackendVhost *vhost_crypto = cryptodev_get_vhost(cc, b, 0);
return &vhost_crypto->dev;
}
static void virtio_crypto_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
VirtioDeviceClass *vdc = VIRTIO_DEVICE_CLASS(klass);
device_class_set_props(dc, virtio_crypto_properties);
dc->vmsd = &vmstate_virtio_crypto;
set_bit(DEVICE_CATEGORY_MISC, dc->categories);
vdc->realize = virtio_crypto_device_realize;
vdc->unrealize = virtio_crypto_device_unrealize;
vdc->get_config = virtio_crypto_get_config;
vdc->get_features = virtio_crypto_get_features;
vdc->reset = virtio_crypto_reset;
vdc->set_status = virtio_crypto_set_status;
vdc->guest_notifier_mask = virtio_crypto_guest_notifier_mask;
vdc->guest_notifier_pending = virtio_crypto_guest_notifier_pending;
vdc->get_vhost = virtio_crypto_get_vhost;
}
static void virtio_crypto_instance_init(Object *obj)
{
VirtIOCrypto *vcrypto = VIRTIO_CRYPTO(obj);
/*
* The default config_size is sizeof(struct virtio_crypto_config).
* Can be overriden with virtio_crypto_set_config_size.
*/
vcrypto->config_size = sizeof(struct virtio_crypto_config);
}
static const TypeInfo virtio_crypto_info = {
.name = TYPE_VIRTIO_CRYPTO,
.parent = TYPE_VIRTIO_DEVICE,
.instance_size = sizeof(VirtIOCrypto),
.instance_init = virtio_crypto_instance_init,
.class_init = virtio_crypto_class_init,
};
static void virtio_register_types(void)
{
type_register_static(&virtio_crypto_info);
}
type_init(virtio_register_types)