mirrors/qemu
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
eed4e3d4c6
qemu/python/tests/minreqs.txt

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

48 lines
1.2 KiB
Plaintext
Raw Normal View History

python: drop pipenv The pipenv tool was nice in theory, but in practice it's just too hard to update selectively, and it makes using it a pain. The qemu.qmp repo dropped pipenv support a while back and it's been functioning just fine, so I'm backporting that change here to qemu.git. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 20230210003147.1309376-3-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2023-02-10 03:31:42 +03:00
# This file lists the ***oldest possible dependencies*** needed to run
Python: Drop support for Python 3.7 Debian 10 is not anymore a supported distro, since Debian 12 was released on June 10, 2023. Our supported build platforms as of today all support at least 3.8 (and all of them except for Ubuntu 20.04 support 3.9): openSUSE Leap 15.5: 3.6.15 (3.11.2) CentOS Stream 8: 3.6.8 (3.8.13, 3.9.16, 3.11.4) CentOS Stream 9: 3.9.17 (3.11.4) Fedora 37: 3.11.4 Fedora 38: 3.11.4 Debian 11: 3.9.2 Debian 12: 3.11.2 Alpine 3.14, 3.15: 3.9.16 Alpine 3.16, 3.17: 3.10.10 Ubuntu 20.04 LTS: 3.8.10 Ubuntu 22.04 LTS: 3.10.12 NetBSD 9.3: 3.9.13* FreeBSD 12.4: 3.9.16 FreeBSD 13.1: 3.9.18 OpenBSD 7.2: 3.9.17 Note: NetBSD does not appear to have a default meta-package, but offers several options, the lowest of which is 3.7.15. However, "python39" appears to be a pre-requisite to one of the other packages we request in tests/vm/netbsd. Since it is safe under our supported platform policy, bump our minimum supported version of Python to 3.8. The two most interesting features to have by default include: - the importlib.metadata module, whose lack is responsible for over 100 lines of code in mkvenv.py - improvements to asyncio, for example asyncio.CancelledError inherits from BaseException rather than Exception In addition, code can now use the assignment operator ':=' Because mypy now learns about importlib.metadata, a small change to mkvenv.py is needed to pass type checking. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-05-03 13:48:02 +03:00
# "make check" successfully under ***Python 3.8***. It is used primarily
python: drop pipenv The pipenv tool was nice in theory, but in practice it's just too hard to update selectively, and it makes using it a pain. The qemu.qmp repo dropped pipenv support a while back and it's been functioning just fine, so I'm backporting that change here to qemu.git. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 20230210003147.1309376-3-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2023-02-10 03:31:42 +03:00
# by GitLab CI to ensure that our stated minimum versions in setup.cfg
# are truthful and regularly validated.
#
# This file should not contain any dependencies that are not expressed
# by the [devel] section of setup.cfg, except for transitive
# dependencies which must be enumerated here explicitly to eliminate
# dependency resolution ambiguity.
#
# When adding new dependencies, pin the very oldest non-yanked version
# on PyPI that allows the test suite to pass.
# Dependencies for the TUI addon (Required for successful linting)
urwid==2.1.2
urwid-readline==0.13
Pygments==2.9.0
mkvenv: add ensure subcommand This command is to be used to add various packages (or ensure they're already present) into the configure-provided venv in a modular fashion. Examples: mkvenv ensure --online --dir "${source_dir}/python/wheels/" "meson>=0.61.5" mkvenv ensure --online "sphinx>=1.6.0" mkvenv ensure "qemu.qmp==0.0.2" It's designed to look for packages in three places, in order: (1) In system packages, if the version installed is already good enough. This way your distribution-provided meson, sphinx, etc are always used as first preference. (2) In a vendored packages directory. Here I am suggesting qemu.git/python/wheels/ as that directory. This is intended to serve as a replacement for vendoring the meson source for QEMU tarballs. It is also highly likely to be extremely useful for packaging the "qemu.qmp" package in source distributions for platforms that do not yet package qemu.qmp separately. (3) Online, via PyPI, ***only when "--online" is passed***. This is only ever used as a fallback if the first two sources do not have an appropriate package that meets the requirement. The ability to build QEMU and run tests *completely offline* is not impinged. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-Id: <20230511035435.734312-7-jsnow@redhat.com> [Use distlib to lookup distributions. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-05-11 06:54:14 +03:00
# Dependencies for mkvenv
distlib==0.3.6
python: drop pipenv The pipenv tool was nice in theory, but in practice it's just too hard to update selectively, and it makes using it a pain. The qemu.qmp repo dropped pipenv support a while back and it's been functioning just fine, so I'm backporting that change here to qemu.git. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 20230210003147.1309376-3-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2023-02-10 03:31:42 +03:00
# Dependencies for FUSE support for qom-fuse
fusepy==2.0.4
# Test-runners, utilities, etc.
avocado-framework==90.0
# Linters
python: bump some of the dependencies The version of pyflakes that is listed in python/tests/minreqs.txt breaks on Python 3.8 with the following message: AttributeError: 'FlakesChecker' object has no attribute 'CONSTANT' Now that we do not support EOL'd Python versions anymore, we can update to newer, fixed versions. It is a good time to do so, before Python packages start dropping support for Python 3.7 as well! The new mypy is also a bit smarter about which packages are actually being used, so remove the now-unnecessary sections from setup.cfg. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-Id: <20230511035435.734312-27-jsnow@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-05-16 12:59:36 +03:00
flake8==5.0.4
python: drop pipenv The pipenv tool was nice in theory, but in practice it's just too hard to update selectively, and it makes using it a pain. The qemu.qmp repo dropped pipenv support a while back and it's been functioning just fine, so I'm backporting that change here to qemu.git. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 20230210003147.1309376-3-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2023-02-10 03:31:42 +03:00
isort==5.1.2
python: bump minimum requirements so they are compatible with 3.12 There are many Python 3.12 issues right now, but a particularly problematic one when debugging them is that one cannot even use minreqs.txt in a Python 3.12 virtual environment to test with locked package versions. Bump the mypy and wrapt versions to fix this, while remaining within the realm of versions compatible with Python 3.7. This requires a workaround for a mypy false positive qemu/qmp/qmp_tui.py:350: error: Non-overlapping equality check (left operand type: "Literal[Runstate.DISCONNECTING]", right operand type: "Literal[Runstate.IDLE]") [comparison-overlap] where mypy does not realize that self.disconnect() could change the value of self.runstate. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-07-05 13:40:46 +03:00
mypy==1.4.0
python: bump some of the dependencies The version of pyflakes that is listed in python/tests/minreqs.txt breaks on Python 3.8 with the following message: AttributeError: 'FlakesChecker' object has no attribute 'CONSTANT' Now that we do not support EOL'd Python versions anymore, we can update to newer, fixed versions. It is a good time to do so, before Python packages start dropping support for Python 3.7 as well! The new mypy is also a bit smarter about which packages are actually being used, so remove the now-unnecessary sections from setup.cfg. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-Id: <20230511035435.734312-27-jsnow@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-05-16 12:59:36 +03:00
pylint==2.17.3
python: drop pipenv The pipenv tool was nice in theory, but in practice it's just too hard to update selectively, and it makes using it a pain. The qemu.qmp repo dropped pipenv support a while back and it's been functioning just fine, so I'm backporting that change here to qemu.git. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 20230210003147.1309376-3-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2023-02-10 03:31:42 +03:00
# Transitive flake8 dependencies
python: bump some of the dependencies The version of pyflakes that is listed in python/tests/minreqs.txt breaks on Python 3.8 with the following message: AttributeError: 'FlakesChecker' object has no attribute 'CONSTANT' Now that we do not support EOL'd Python versions anymore, we can update to newer, fixed versions. It is a good time to do so, before Python packages start dropping support for Python 3.7 as well! The new mypy is also a bit smarter about which packages are actually being used, so remove the now-unnecessary sections from setup.cfg. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-Id: <20230511035435.734312-27-jsnow@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-05-16 12:59:36 +03:00
mccabe==0.7.0
pycodestyle==2.9.1
pyflakes==2.5.0
python: drop pipenv The pipenv tool was nice in theory, but in practice it's just too hard to update selectively, and it makes using it a pain. The qemu.qmp repo dropped pipenv support a while back and it's been functioning just fine, so I'm backporting that change here to qemu.git. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 20230210003147.1309376-3-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2023-02-10 03:31:42 +03:00
# Transitive mypy dependencies
python: bump minimum requirements so they are compatible with 3.12 There are many Python 3.12 issues right now, but a particularly problematic one when debugging them is that one cannot even use minreqs.txt in a Python 3.12 virtual environment to test with locked package versions. Bump the mypy and wrapt versions to fix this, while remaining within the realm of versions compatible with Python 3.7. This requires a workaround for a mypy false positive qemu/qmp/qmp_tui.py:350: error: Non-overlapping equality check (left operand type: "Literal[Runstate.DISCONNECTING]", right operand type: "Literal[Runstate.IDLE]") [comparison-overlap] where mypy does not realize that self.disconnect() could change the value of self.runstate. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-07-05 13:40:46 +03:00
mypy-extensions==1.0.0
typing-extensions==4.7.1
python: drop pipenv The pipenv tool was nice in theory, but in practice it's just too hard to update selectively, and it makes using it a pain. The qemu.qmp repo dropped pipenv support a while back and it's been functioning just fine, so I'm backporting that change here to qemu.git. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 20230210003147.1309376-3-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2023-02-10 03:31:42 +03:00
# Transitive pylint dependencies
python: bump some of the dependencies The version of pyflakes that is listed in python/tests/minreqs.txt breaks on Python 3.8 with the following message: AttributeError: 'FlakesChecker' object has no attribute 'CONSTANT' Now that we do not support EOL'd Python versions anymore, we can update to newer, fixed versions. It is a good time to do so, before Python packages start dropping support for Python 3.7 as well! The new mypy is also a bit smarter about which packages are actually being used, so remove the now-unnecessary sections from setup.cfg. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-Id: <20230511035435.734312-27-jsnow@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-05-16 12:59:36 +03:00
astroid==2.15.4
python: drop pipenv The pipenv tool was nice in theory, but in practice it's just too hard to update selectively, and it makes using it a pain. The qemu.qmp repo dropped pipenv support a while back and it's been functioning just fine, so I'm backporting that change here to qemu.git. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 20230210003147.1309376-3-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2023-02-10 03:31:42 +03:00
lazy-object-proxy==1.4.0
toml==0.10.0
python: bump minimum requirements so they are compatible with 3.12 There are many Python 3.12 issues right now, but a particularly problematic one when debugging them is that one cannot even use minreqs.txt in a Python 3.12 virtual environment to test with locked package versions. Bump the mypy and wrapt versions to fix this, while remaining within the realm of versions compatible with Python 3.7. This requires a workaround for a mypy false positive qemu/qmp/qmp_tui.py:350: error: Non-overlapping equality check (left operand type: "Literal[Runstate.DISCONNECTING]", right operand type: "Literal[Runstate.IDLE]") [comparison-overlap] where mypy does not realize that self.disconnect() could change the value of self.runstate. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-07-05 13:40:46 +03:00
wrapt==1.14.0
Reference in New Issue Copy Permalink