qemu/block/blkreplay.c

157 lines
4.3 KiB
C
Raw Normal View History

/*
* Block protocol for record/replay
*
* Copyright (c) 2010-2016 Institute for System Programming
* of the Russian Academy of Sciences.
*
* This work is licensed under the terms of the GNU GPL, version 2 or later.
* See the COPYING file in the top-level directory.
*
*/
#include "qemu/osdep.h"
#include "qemu/module.h"
#include "block/block-io.h"
#include "block/block_int.h"
#include "sysemu/replay.h"
#include "qapi/error.h"
typedef struct Request {
Coroutine *co;
QEMUBH *bh;
} Request;
static int blkreplay_open(BlockDriverState *bs, QDict *options, int flags,
Error **errp)
{
int ret;
/* Open the image file */
ret = bdrv_open_file_child(NULL, options, "image", bs, errp);
if (ret < 0) {
goto fail;
}
bs->supported_write_flags = BDRV_REQ_WRITE_UNCHANGED;
bs->supported_zero_flags = BDRV_REQ_WRITE_UNCHANGED;
ret = 0;
fail:
return ret;
}
static int64_t blkreplay_getlength(BlockDriverState *bs)
{
return bdrv_getlength(bs->file->bs);
}
/* This bh is used for synchronization of return from coroutines.
It continues yielded coroutine which then finishes its execution.
BH is called adjusted to some replay checkpoint, therefore
record and replay will always finish coroutines deterministically.
*/
static void blkreplay_bh_cb(void *opaque)
{
Request *req = opaque;
aio_co_wake(req->co);
qemu_bh_delete(req->bh);
g_free(req);
}
static void block_request_create(uint64_t reqid, BlockDriverState *bs,
Coroutine *co)
{
Request *req = g_new(Request, 1);
*req = (Request) {
.co = co,
.bh = aio_bh_new(bdrv_get_aio_context(bs), blkreplay_bh_cb, req),
};
replay_block_event(req->bh, reqid);
}
static int coroutine_fn blkreplay_co_preadv(BlockDriverState *bs,
block: use int64_t instead of uint64_t in driver read handlers We are generally moving to int64_t for both offset and bytes parameters on all io paths. Main motivation is realization of 64-bit write_zeroes operation for fast zeroing large disk chunks, up to the whole disk. We chose signed type, to be consistent with off_t (which is signed) and with possibility for signed return type (where negative value means error). So, convert driver read handlers parameters which are already 64bit to signed type. While being here, convert also flags parameter to be BdrvRequestFlags. Now let's consider all callers. Simple git grep '\->bdrv_\(aio\|co\)_preadv\(_part\)\?' shows that's there three callers of driver function: bdrv_driver_preadv() in block/io.c, passes int64_t, checked by bdrv_check_qiov_request() to be non-negative. qcow2_load_vmstate() does bdrv_check_qiov_request(). do_perform_cow_read() has uint64_t argument. And a lot of things in qcow2 driver are uint64_t, so converting it is big job. But we must not work with requests that don't satisfy bdrv_check_qiov_request(), so let's just assert it here. Still, the functions may be called directly, not only by drv->... Let's check: git grep '\.bdrv_\(aio\|co\)_preadv\(_part\)\?\s*=' | \ awk '{print $4}' | sed 's/,//' | sed 's/&//' | sort | uniq | \ while read func; do git grep "$func(" | \ grep -v "$func(BlockDriverState"; done The only one such caller: QEMUIOVector qiov = QEMU_IOVEC_INIT_BUF(qiov, &data, 1); ... ret = bdrv_replace_test_co_preadv(bs, 0, 1, &qiov, 0); in tests/unit/test-bdrv-drain.c, and it's OK obviously. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20210903102807.27127-4-vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: fix typos] Signed-off-by: Eric Blake <eblake@redhat.com>
2021-09-03 13:27:59 +03:00
int64_t offset, int64_t bytes, QEMUIOVector *qiov, BdrvRequestFlags flags)
{
uint64_t reqid = blkreplay_next_id();
int ret = bdrv_co_preadv(bs->file, offset, bytes, qiov, flags);
block_request_create(reqid, bs, qemu_coroutine_self());
qemu_coroutine_yield();
return ret;
}
static int coroutine_fn blkreplay_co_pwritev(BlockDriverState *bs,
block: use int64_t instead of uint64_t in driver write handlers We are generally moving to int64_t for both offset and bytes parameters on all io paths. Main motivation is realization of 64-bit write_zeroes operation for fast zeroing large disk chunks, up to the whole disk. We chose signed type, to be consistent with off_t (which is signed) and with possibility for signed return type (where negative value means error). So, convert driver write handlers parameters which are already 64bit to signed type. While being here, convert also flags parameter to be BdrvRequestFlags. Now let's consider all callers. Simple git grep '\->bdrv_\(aio\|co\)_pwritev\(_part\)\?' shows that's there three callers of driver function: bdrv_driver_pwritev() and bdrv_driver_pwritev_compressed() in block/io.c, both pass int64_t, checked by bdrv_check_qiov_request() to be non-negative. qcow2_save_vmstate() does bdrv_check_qiov_request(). Still, the functions may be called directly, not only by drv->... Let's check: git grep '\.bdrv_\(aio\|co\)_pwritev\(_part\)\?\s*=' | \ awk '{print $4}' | sed 's/,//' | sed 's/&//' | sort | uniq | \ while read func; do git grep "$func(" | \ grep -v "$func(BlockDriverState"; done shows several callers: qcow2: qcow2_co_truncate() write at most up to @offset, which is checked in generic qcow2_co_truncate() by bdrv_check_request(). qcow2_co_pwritev_compressed_task() pass the request (or part of the request) that already went through normal write path, so it should be OK qcow: qcow_co_pwritev_compressed() pass int64_t, it's updated by this patch quorum: quorum_co_pwrite_zeroes() pass int64_t and int - OK throttle: throttle_co_pwritev_compressed() pass int64_t, it's updated by this patch vmdk: vmdk_co_pwritev_compressed() pass int64_t, it's updated by this patch Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20210903102807.27127-5-vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2021-09-03 13:28:00 +03:00
int64_t offset, int64_t bytes, QEMUIOVector *qiov, BdrvRequestFlags flags)
{
uint64_t reqid = blkreplay_next_id();
int ret = bdrv_co_pwritev(bs->file, offset, bytes, qiov, flags);
block_request_create(reqid, bs, qemu_coroutine_self());
qemu_coroutine_yield();
return ret;
}
static int coroutine_fn blkreplay_co_pwrite_zeroes(BlockDriverState *bs,
block: use int64_t instead of int in driver write_zeroes handlers We are generally moving to int64_t for both offset and bytes parameters on all io paths. Main motivation is realization of 64-bit write_zeroes operation for fast zeroing large disk chunks, up to the whole disk. We chose signed type, to be consistent with off_t (which is signed) and with possibility for signed return type (where negative value means error). So, convert driver write_zeroes handlers bytes parameter to int64_t. The only caller of all updated function is bdrv_co_do_pwrite_zeroes(). bdrv_co_do_pwrite_zeroes() itself is of course OK with widening of callee parameter type. Also, bdrv_co_do_pwrite_zeroes()'s max_write_zeroes is limited to INT_MAX. So, updated functions all are safe, they will not get "bytes" larger than before. Still, let's look through all updated functions, and add assertions to the ones which are actually unprepared to values larger than INT_MAX. For these drivers also set explicit max_pwrite_zeroes limit. Let's go: blkdebug: calculations can't overflow, thanks to bdrv_check_qiov_request() in generic layer. rule_check() and bdrv_co_pwrite_zeroes() both have 64bit argument. blklogwrites: pass to blk_log_writes_co_log() with 64bit argument. blkreplay, copy-on-read, filter-compress: pass to bdrv_co_pwrite_zeroes() which is OK copy-before-write: Calls cbw_do_copy_before_write() and bdrv_co_pwrite_zeroes, both have 64bit argument. file-posix: both handler calls raw_do_pwrite_zeroes, which is updated. In raw_do_pwrite_zeroes() calculations are OK due to bdrv_check_qiov_request(), bytes go to RawPosixAIOData::aio_nbytes which is uint64_t. Check also where that uint64_t gets handed: handle_aiocb_write_zeroes_block() passes a uint64_t[2] to ioctl(BLKZEROOUT), handle_aiocb_write_zeroes() calls do_fallocate() which takes off_t (and we compile to always have 64-bit off_t), as does handle_aiocb_write_zeroes_unmap. All look safe. gluster: bytes go to GlusterAIOCB::size which is int64_t and to glfs_zerofill_async works with off_t. iscsi: Aha, here we deal with iscsi_writesame16_task() that has uint32_t num_blocks argument and iscsi_writesame16_task() has uint16_t argument. Make comments, add assertions and clarify max_pwrite_zeroes calculation. iscsi_allocmap_() functions already has int64_t argument is_byte_request_lun_aligned is simple to update, do it. mirror_top: pass to bdrv_mirror_top_do_write which has uint64_t argument nbd: Aha, here we have protocol limitation, and NBDRequest::len is uint32_t. max_pwrite_zeroes is cleanly set to 32bit value, so we are OK for now. nvme: Again, protocol limitation. And no inherent limit for write-zeroes at all. But from code that calculates cdw12 it's obvious that we do have limit and alignment. Let's clarify it. Also, obviously the code is not prepared to handle bytes=0. Let's handle this case too. trace events already 64bit preallocate: pass to handle_write() and bdrv_co_pwrite_zeroes(), both 64bit. rbd: pass to qemu_rbd_start_co() which is 64bit. qcow2: offset + bytes and alignment still works good (thanks to bdrv_check_qiov_request()), so tail calculation is OK qcow2_subcluster_zeroize() has 64bit argument, should be OK trace events updated qed: qed_co_request wants int nb_sectors. Also in code we have size_t used for request length which may be 32bit. So, let's just keep INT_MAX as a limit (aligning it down to pwrite_zeroes_alignment) and don't care. raw-format: Is OK. raw_adjust_offset and bdrv_co_pwrite_zeroes are both 64bit. throttle: Both throttle_group_co_io_limits_intercept() and bdrv_co_pwrite_zeroes() are 64bit. vmdk: pass to vmdk_pwritev which is 64bit quorum: pass to quorum_co_pwritev() which is 64bit Hooray! At this point all block drivers are prepared to support 64bit write-zero requests, or have explicitly set max_pwrite_zeroes. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20210903102807.27127-8-vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: use <= rather than < in assertions relying on max_pwrite_zeroes] Signed-off-by: Eric Blake <eblake@redhat.com>
2021-09-03 13:28:03 +03:00
int64_t offset, int64_t bytes, BdrvRequestFlags flags)
{
uint64_t reqid = blkreplay_next_id();
int ret = bdrv_co_pwrite_zeroes(bs->file, offset, bytes, flags);
block_request_create(reqid, bs, qemu_coroutine_self());
qemu_coroutine_yield();
return ret;
}
static int coroutine_fn blkreplay_co_pdiscard(BlockDriverState *bs,
block: use int64_t instead of int in driver discard handlers We are generally moving to int64_t for both offset and bytes parameters on all io paths. Main motivation is realization of 64-bit write_zeroes operation for fast zeroing large disk chunks, up to the whole disk. We chose signed type, to be consistent with off_t (which is signed) and with possibility for signed return type (where negative value means error). So, convert driver discard handlers bytes parameter to int64_t. The only caller of all updated function is bdrv_co_pdiscard in block/io.c. It is already prepared to work with 64bit requests, but pass at most max(bs->bl.max_pdiscard, INT_MAX) to the driver. Let's look at all updated functions: blkdebug: all calculations are still OK, thanks to bdrv_check_qiov_request(). both rule_check and bdrv_co_pdiscard are 64bit blklogwrites: pass to blk_loc_writes_co_log which is 64bit blkreplay, copy-on-read, filter-compress: pass to bdrv_co_pdiscard, OK copy-before-write: pass to bdrv_co_pdiscard which is 64bit and to cbw_do_copy_before_write which is 64bit file-posix: one handler calls raw_account_discard() is 64bit and both handlers calls raw_do_pdiscard(). Update raw_do_pdiscard, which pass to RawPosixAIOData::aio_nbytes, which is 64bit (and calls raw_account_discard()) gluster: somehow, third argument of glfs_discard_async is size_t. Let's set max_pdiscard accordingly. iscsi: iscsi_allocmap_set_invalid is 64bit, !is_byte_request_lun_aligned is 64bit. list.num is uint32_t. Let's clarify max_pdiscard and pdiscard_alignment. mirror_top: pass to bdrv_mirror_top_do_write() which is 64bit nbd: protocol limitation. max_pdiscard is alredy set strict enough, keep it as is for now. nvme: buf.nlb is uint32_t and we do shift. So, add corresponding limits to nvme_refresh_limits(). preallocate: pass to bdrv_co_pdiscard() which is 64bit. rbd: pass to qemu_rbd_start_co() which is 64bit. qcow2: calculations are still OK, thanks to bdrv_check_qiov_request(), qcow2_cluster_discard() is 64bit. raw-format: raw_adjust_offset() is 64bit, bdrv_co_pdiscard too. throttle: pass to bdrv_co_pdiscard() which is 64bit and to throttle_group_co_io_limits_intercept() which is 64bit as well. test-block-iothread: bytes argument is unused Great! Now all drivers are prepared to handle 64bit discard requests, or else have explicit max_pdiscard limits. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20210903102807.27127-11-vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2021-09-03 13:28:06 +03:00
int64_t offset, int64_t bytes)
{
uint64_t reqid = blkreplay_next_id();
int ret = bdrv_co_pdiscard(bs->file, offset, bytes);
block_request_create(reqid, bs, qemu_coroutine_self());
qemu_coroutine_yield();
return ret;
}
static int coroutine_fn blkreplay_co_flush(BlockDriverState *bs)
{
uint64_t reqid = blkreplay_next_id();
int ret = bdrv_co_flush(bs->file->bs);
block_request_create(reqid, bs, qemu_coroutine_self());
qemu_coroutine_yield();
return ret;
}
static int blkreplay_snapshot_goto(BlockDriverState *bs,
const char *snapshot_id)
{
return bdrv_snapshot_goto(bs->file->bs, snapshot_id, NULL);
}
static BlockDriver bdrv_blkreplay = {
.format_name = "blkreplay",
.instance_size = 0,
.is_filter = true,
.bdrv_open = blkreplay_open,
.bdrv_child_perm = bdrv_default_perms,
.bdrv_getlength = blkreplay_getlength,
.bdrv_co_preadv = blkreplay_co_preadv,
.bdrv_co_pwritev = blkreplay_co_pwritev,
.bdrv_co_pwrite_zeroes = blkreplay_co_pwrite_zeroes,
.bdrv_co_pdiscard = blkreplay_co_pdiscard,
.bdrv_co_flush = blkreplay_co_flush,
.bdrv_snapshot_goto = blkreplay_snapshot_goto,
};
static void bdrv_blkreplay_init(void)
{
bdrv_register(&bdrv_blkreplay);
}
block_init(bdrv_blkreplay_init);