mirrors/qemu
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
eaa2ddbb76
qemu/.gitignore

106 lines
1.7 KiB
Plaintext
Raw Normal View History

gitignore: anchor all ignored names by default, patterns/names in .gitignore are applied recursively to all subdirectories. So any name mentioned in .gitignore is ignored in all subdirectores. This is good for, say. object files (*.o), but not good for particular names which should be ignored only in one directory. For example, qemu-img.1 file is generated in the top directory, and it should be ignored only there, not in some subdir. At first, this might not matter much, but we have lots of examples already where it actually does not help at all. For example, top-level .gitignore ignores a file/dir named "patches" (which is very questionable by itself), but it is applied recursively, so git also ignores, for example, debian/patches/ which should not be ignored. So anchor all the names where appropriate. .gitignore should be cleaned up further, which will be addressed in a subsequent patch. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-02-11 14:22:32 +04:00
/config-devices.*
/config-all-devices.*
/config-all-disas.*
/config-host.*
/config-target.*
/config.status
configure: Put tempfiles in a subdir of the build directory When libtool support was added to configure, the new temporary files were left out of the list of files cleaned up on exit; this results in a lot of stale .lo files being left around in /tmp. Worse, libtool creates a /tmp/.libs directory which we can't easily clean up. Put all our temporary files in a single temporary directory created as a subdirectory of the build directory, so we can easily clean it up, and don't need fragile or complicated code for creation to avoid it clashing with temporary directories from other instances of QEMU configure or being subject to attack from adversaries who can write to /tmp. Since the temporaries now live in the build tree, we have no need to jump through hoops with a trap handler to try to remove them when configure exits; this fixes some weird bugs where hitting ^C during a configure run wouldn't actually make it stop, because we would run the trap handler but then not stop. (It is possible to get the trap handler semantics right but it is convoluted largely because of bugs in dash, so it is simpler to just avoid it.) Note that "temporary files go in the build directory, not /tmp" is the way autoconf behaves. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-05-23 20:07:24 +04:00
/config-temp
gitignore: anchor all ignored names by default, patterns/names in .gitignore are applied recursively to all subdirectories. So any name mentioned in .gitignore is ignored in all subdirectores. This is good for, say. object files (*.o), but not good for particular names which should be ignored only in one directory. For example, qemu-img.1 file is generated in the top directory, and it should be ignored only there, not in some subdir. At first, this might not matter much, but we have lots of examples already where it actually does not help at all. For example, top-level .gitignore ignores a file/dir named "patches" (which is very questionable by itself), but it is applied recursively, so git also ignores, for example, debian/patches/ which should not be ignored. So anchor all the names where appropriate. .gitignore should be cleaned up further, which will be addressed in a subsequent patch. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-02-11 14:22:32 +04:00
/trace/generated-tracers.h
/trace/generated-tracers.c
/trace/generated-tracers-dtrace.h
/trace/generated-tracers.dtrace
/trace/generated-events.h
/trace/generated-events.c
trace: [tcg] Define TCG tracing helper routine wrappers Generates header "trace/generated-helpers-wrappers.h" with definitions for TCG helper wrappers. These wrappers ('gen_helper_trace_${event}_exec_wrapper') transform mixed native and TCG argument types to TCG types and call the actual TCG helpers ('gen_helper_trace_${event}_exec_proxy'). Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-05-30 16:12:01 +04:00
/trace/generated-helpers-wrappers.h
trace: [tcg] Declare TCG tracing helper routines Generates file "trace/generated-helpers.h" with TCG helper declarations to trace events in guest code at execution time ('trace_${event}_exec_proxy'). Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-05-30 16:11:50 +04:00
/trace/generated-helpers.h
trace: [tcg] Define TCG tracing helper routines Generates file "trace/generated-helpers.c" with TCG helper definitions to trace events in guest code at execution time. The helpers ('helper_trace_${event}_exec_proxy') cast the TCG-compatible native argument types to their original types (as defined in "trace-events") and call the tracing routine ('trace_${event}_exec'). Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-05-30 16:11:56 +04:00
/trace/generated-helpers.c
trace: [tcg] Generate TCG tracing routines Generate header "trace/generated-tcg-tracers.h" with the necessary routines for tracing events in guest code: * trace_${event}_tcg Convenience wrapper that calls the translation-time tracer 'trace_${event}_trans', and calls 'gen_helper_trace_${event}_exec to generate the TCG code to later trace the event at execution time. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-05-30 16:12:13 +04:00
/trace/generated-tcg-tracers.h
Add ust generated files to .gitignore Signed-off-by: Mohamad Gebai <mohamad.gebai@polymtl.ca> Reviewed-by: Alex Bennée <alex@bennee.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-01-30 07:47:58 +04:00
/trace/generated-ust-provider.h
/trace/generated-ust.c
gitignore: anchor all ignored names by default, patterns/names in .gitignore are applied recursively to all subdirectories. So any name mentioned in .gitignore is ignored in all subdirectores. This is good for, say. object files (*.o), but not good for particular names which should be ignored only in one directory. For example, qemu-img.1 file is generated in the top directory, and it should be ignored only there, not in some subdir. At first, this might not matter much, but we have lots of examples already where it actually does not help at all. For example, top-level .gitignore ignores a file/dir named "patches" (which is very questionable by itself), but it is applied recursively, so git also ignores, for example, debian/patches/ which should not be ignored. So anchor all the names where appropriate. .gitignore should be cleaned up further, which will be addressed in a subsequent patch. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-02-11 14:22:32 +04:00
/libcacard/trace/generated-tracers.c
.gitignore: Ignore *-timestamp Timestamp files were recently added to reduce make churn on source files that use tracing. The timestamp files should never be committed and should not be visible in git status. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-10-07 15:07:15 +04:00
*-timestamp
gitignore: anchor all ignored names by default, patterns/names in .gitignore are applied recursively to all subdirectories. So any name mentioned in .gitignore is ignored in all subdirectores. This is good for, say. object files (*.o), but not good for particular names which should be ignored only in one directory. For example, qemu-img.1 file is generated in the top directory, and it should be ignored only there, not in some subdir. At first, this might not matter much, but we have lots of examples already where it actually does not help at all. For example, top-level .gitignore ignores a file/dir named "patches" (which is very questionable by itself), but it is applied recursively, so git also ignores, for example, debian/patches/ which should not be ignored. So anchor all the names where appropriate. .gitignore should be cleaned up further, which will be addressed in a subsequent patch. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-02-11 14:22:32 +04:00
/*-softmmu
/*-darwin-user
/*-linux-user
/*-bsd-user
gitignore: cleanups #2 A few more cleanups for .gitignore file. The final goal is to have only files in there which are generated during build. Things like .orig or .gdbinit are definitely not generated during build. Also, anchor a few more build-time directories. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-04-27 15:02:26 +04:00
/libdis*
/libuser
gitignore: anchor all ignored names by default, patterns/names in .gitignore are applied recursively to all subdirectories. So any name mentioned in .gitignore is ignored in all subdirectores. This is good for, say. object files (*.o), but not good for particular names which should be ignored only in one directory. For example, qemu-img.1 file is generated in the top directory, and it should be ignored only there, not in some subdir. At first, this might not matter much, but we have lots of examples already where it actually does not help at all. For example, top-level .gitignore ignores a file/dir named "patches" (which is very questionable by itself), but it is applied recursively, so git also ignores, for example, debian/patches/ which should not be ignored. So anchor all the names where appropriate. .gitignore should be cleaned up further, which will be addressed in a subsequent patch. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-02-11 14:22:32 +04:00
/linux-headers/asm
Add qga/qapi-generated to .gitignore The folder "qga/qapi-generated" shows up after building QEMU, and gets in the way during e.g. "git add ."; Add it to .gitignore to keep it from accidentally ending up in the wrong place. Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-03-10 22:08:59 +04:00
/qga/qapi-generated
gitignore: anchor all ignored names by default, patterns/names in .gitignore are applied recursively to all subdirectories. So any name mentioned in .gitignore is ignored in all subdirectores. This is good for, say. object files (*.o), but not good for particular names which should be ignored only in one directory. For example, qemu-img.1 file is generated in the top directory, and it should be ignored only there, not in some subdir. At first, this might not matter much, but we have lots of examples already where it actually does not help at all. For example, top-level .gitignore ignores a file/dir named "patches" (which is very questionable by itself), but it is applied recursively, so git also ignores, for example, debian/patches/ which should not be ignored. So anchor all the names where appropriate. .gitignore should be cleaned up further, which will be addressed in a subsequent patch. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-02-11 14:22:32 +04:00
/qapi-generated
/qapi-types.[ch]
/qapi-visit.[ch]
qapi: ignore generated event files Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-25 03:33:58 +04:00
/qapi-event.[ch]
gitignore: anchor all ignored names by default, patterns/names in .gitignore are applied recursively to all subdirectories. So any name mentioned in .gitignore is ignored in all subdirectores. This is good for, say. object files (*.o), but not good for particular names which should be ignored only in one directory. For example, qemu-img.1 file is generated in the top directory, and it should be ignored only there, not in some subdir. At first, this might not matter much, but we have lots of examples already where it actually does not help at all. For example, top-level .gitignore ignores a file/dir named "patches" (which is very questionable by itself), but it is applied recursively, so git also ignores, for example, debian/patches/ which should not be ignored. So anchor all the names where appropriate. .gitignore should be cleaned up further, which will be addressed in a subsequent patch. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-02-11 14:22:32 +04:00
/qmp-commands.h
/qmp-marshal.c
/qemu-doc.html
/qemu-tech.html
/qemu-doc.info
/qemu-tech.info
/qemu-img
/qemu-nbd
/qemu-options.def
/qemu-options.texi
/qemu-img-cmds.texi
/qemu-img-cmds.h
/qemu-io
/qemu-ga
/qemu-bridge-helper
/qemu-monitor.texi
/qmp-commands.txt
/vscclient
/fsdev/virtfs-proxy-helper
gitignore: Ignore more .pod files. kvm_stat.{1,pod} started showing up as untracked files in my directory, and I nearly accidentally merged them into a commit with my usual habit of 'git add .'. Rather than spelling out each such file, just ignore the entire pattern. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-03-20 19:30:44 +03:00
*.[1-9]
Add gitignore file While QEMU officially uses SVN, there are a number of unofficial git repositories that many developers use. Adding a .gitignore (derived from the svn:ignore) will make their lives a lot easier. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5183 c046a42c-6fe2-441c-8c8c-71466251a162
2008-09-09 21:15:28 +04:00
*.a
*.aux
*.cp
*.dvi
*.exe
rules.mak: introduce DSO rules Add necessary rules and flags for shared object generation. The new rules introduced here are: 1) %.o in $(common-obj-m) is compiled to %.o, then linked to %.so. 2) %.mo in $(common-obj-m) is the placeholder for %.so for pattern matching in Makefile. It's linked to "-shared" with all its dependencies (multiple *.o) as input. Which means the list of depended objects must be specified in each sub-Makefile.objs: foo.mo-objs := bar.o baz.o qux.o in the same style with foo.o-cflags and foo.o-libs. The objects here will be prefixed with "$(obj)/" if it's a subdirectory Makefile.objs. 3) For all files ending up in %.so, the following is added automatically: foo.o-cflags += -fPIC -DBUILD_DSO Also introduce --enable-modules in configure, the option will enable support of shared object build. Otherwise objects are static linked to executables. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-02-10 10:48:56 +04:00
*.dll
*.so
*.mo
Add gitignore file While QEMU officially uses SVN, there are a number of unofficial git repositories that many developers use. Adding a .gitignore (derived from the svn:ignore) will make their lives a lot easier. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5183 c046a42c-6fe2-441c-8c8c-71466251a162
2008-09-09 21:15:28 +04:00
*.fn
*.ky
*.log
Documentation: Add build support for documentation in pdf format Makefile already supported dvi, html and info formats, but pdf was missing. pdf is especially convenient for printing and for documentation reviews. I hope it will help to improve qemu's documentation. Make now supports the new target 'pdf' which will create qemu-doc.pdf and qemu-tech.pdf. It is also possible to build both files individually. texi2pdf and texi2dvi are rather noisy, so normally some less important warnings are suppressed. When make is called with V=1 (verbose mode), warnings are not suppressed. The patch also sorts the documentation targets alphabetically and wraps a line which was too long. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-30 01:16:50 +03:00
*.pdf
gitignore: Ignore more .pod files. kvm_stat.{1,pod} started showing up as untracked files in my directory, and I nearly accidentally merged them into a commit with my usual habit of 'git add .'. Rather than spelling out each such file, just ignore the entire pattern. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-03-20 19:30:44 +03:00
*.pod
Makefile: Clean up after "make pdf" Signed-off-by: Brad Hards <bradh@frogmouth.net> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-04-13 10:42:16 +04:00
*.cps
*.fns
*.kys
Add gitignore file While QEMU officially uses SVN, there are a number of unofficial git repositories that many developers use. Adding a .gitignore (derived from the svn:ignore) will make their lives a lot easier. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5183 c046a42c-6fe2-441c-8c8c-71466251a162
2008-09-09 21:15:28 +04:00
*.pg
trace: Add simple built-in tracing backend This patch adds a simple tracer which produces binary trace files. To try out the simple backend: $ ./configure --trace-backend=simple $ make After running QEMU you can pretty-print the trace: $ ./simpletrace.py trace-events trace.log The output of simpletrace.py looks like this: qemu_realloc 0.699 ptr=0x24363f0 size=0x3 newptr=0x24363f0 qemu_free 0.768 ptr=0x24363f0 ^ ^---- timestamp delta (us) |____ trace event name Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> trace: Make trace record fields 64-bit Explicitly use 64-bit fields in trace records so that timestamps and magic numbers work for 32-bit host builds. Includes fixes from Prerna Saxena <prerna@linux.vnet.ibm.com>. Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2010-05-22 22:24:51 +04:00
*.pyc
Add gitignore file While QEMU officially uses SVN, there are a number of unofficial git repositories that many developers use. Adding a .gitignore (derived from the svn:ignore) will make their lives a lot easier. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5183 c046a42c-6fe2-441c-8c8c-71466251a162
2008-09-09 21:15:28 +04:00
*.toc
*.tp
*.vr
*.d
gitignore: anchor all ignored names by default, patterns/names in .gitignore are applied recursively to all subdirectories. So any name mentioned in .gitignore is ignored in all subdirectores. This is good for, say. object files (*.o), but not good for particular names which should be ignored only in one directory. For example, qemu-img.1 file is generated in the top directory, and it should be ignored only there, not in some subdir. At first, this might not matter much, but we have lots of examples already where it actually does not help at all. For example, top-level .gitignore ignores a file/dir named "patches" (which is very questionable by itself), but it is applied recursively, so git also ignores, for example, debian/patches/ which should not be ignored. So anchor all the names where appropriate. .gitignore should be cleaned up further, which will be addressed in a subsequent patch. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-02-11 14:22:32 +04:00
!/scripts/qemu-guest-agent/fsfreeze-hook.d
Extend gitignore (Jan Kiszka) Exclude objects in the root directory and temporary stgit files. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6401 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-22 20:15:25 +03:00
*.o
.gitignore update Makes sure the following files are ignored: libcacard/.libs/ libcacard/libcacard.la libcacard/libcacard.pc libcacard/libcacard/ libcacard/osdep.lo libcacard/oslib-posix.lo libcacard/qemu-thread-posix.lo libcacard/qemu-timer-common.lo libcacard/trace.lo libcacard/trace/ tests/test-visitor-serialization vscclient Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-07-04 23:10:47 +04:00
*.lo
*.la
*.pc
.libs
qemu-ga: Add configure options to specify path to Windows/VSS SDK To enable VSS support in qemu-ga for Windows, header files included in VSS SDK are required. The VSS support is enabled by the configure option like below: ./configure --with-vss-sdk="/path/to/VSS SDK" If the path is omitted, it tries to search the headers from default paths and VSS support is enabled only if the SDK is found. VSS support is disabled if --without-vss-sdk or --with-vss-sdk=no is specified. VSS SDK is available from: http://www.microsoft.com/en-us/download/details.aspx?id=23490 To cross-compile using mingw, you need to setup the SDK on Windows environments to extract headers. You can also extract the SDK headers on POSIX environments using scripts/extract-vss-headers and msitools. In addition, --with-win-sdk="/path/to/Windows SDK" option is also added to specify path to Windows SDK, which may be used for native-compile of .tlb file of qemu-ga VSS provider. However, this is usually unnecessary because pre-compiled .tlb file is included. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2013-08-07 19:40:03 +04:00
.sdk
gitignore: ignore more files ignore *.patch, *.gcda, *.gcno Signed-off-by: liguang <lig.fnst@cn.fujitsu.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-22 12:44:13 +04:00
*.gcda
*.gcno
gitignore: anchor all ignored names by default, patterns/names in .gitignore are applied recursively to all subdirectories. So any name mentioned in .gitignore is ignored in all subdirectores. This is good for, say. object files (*.o), but not good for particular names which should be ignored only in one directory. For example, qemu-img.1 file is generated in the top directory, and it should be ignored only there, not in some subdir. At first, this might not matter much, but we have lots of examples already where it actually does not help at all. For example, top-level .gitignore ignores a file/dir named "patches" (which is very questionable by itself), but it is applied recursively, so git also ignores, for example, debian/patches/ which should not be ignored. So anchor all the names where appropriate. .gitignore should be cleaned up further, which will be addressed in a subsequent patch. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-02-11 14:22:32 +04:00
/pc-bios/bios-pq/status
/pc-bios/vgabios-pq/status
/pc-bios/optionrom/linuxboot.asm
/pc-bios/optionrom/linuxboot.bin
/pc-bios/optionrom/linuxboot.raw
/pc-bios/optionrom/linuxboot.img
/pc-bios/optionrom/multiboot.asm
/pc-bios/optionrom/multiboot.bin
/pc-bios/optionrom/multiboot.raw
/pc-bios/optionrom/multiboot.img
/pc-bios/optionrom/kvmvapic.asm
/pc-bios/optionrom/kvmvapic.bin
/pc-bios/optionrom/kvmvapic.raw
/pc-bios/optionrom/kvmvapic.img
/pc-bios/s390-ccw/s390-ccw.elf
/pc-bios/s390-ccw/s390-ccw.img
Extend gitignore (Jan Kiszka) Exclude objects in the root directory and temporary stgit files. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6401 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-22 20:15:25 +03:00
.stgit-*
add cscope.* to .gitignore we have "make cscope", therefore that makes sense to have cscope.* in .gitignore. Signed-off-by: Jun Koi <junkoi2004@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-23 09:59:52 +04:00
cscope.*
.gitignore: ignore vi swap files and ctags files Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-01-31 18:20:40 +03:00
tags
Add TAGS and *~ to .gitignore Add the etags output generated by "make TAGS" and editor backup files to .gitignore. This patch has previously appeared in my series of patches to add pSeries emulation support. However, it obviously has no real connection to that, and can be applied seperately. Please apply. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-02-24 08:34:59 +03:00
TAGS
*~
Reference in New Issue Copy Permalink