qemu/tests/qtest/fdc-test.c

647 lines
15 KiB
C
Raw Normal View History

/*
* Floppy test cases.
*
* Copyright (c) 2012 Kevin Wolf <kwolf@redhat.com>
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "libqtest-single.h"
#include "qapi/qmp/qdict.h"
/* TODO actually test the results and get rid of this */
#define qmp_discard_response(...) qobject_unref(qmp(__VA_ARGS__))
#define DRIVE_FLOPPY_BLANK \
"-drive if=floppy,file=null-co://,file.read-zeroes=on,format=raw,size=1440k"
#define TEST_IMAGE_SIZE 1440 * 1024
#define FLOPPY_BASE 0x3f0
#define FLOPPY_IRQ 6
enum {
reg_sra = 0x0,
reg_srb = 0x1,
reg_dor = 0x2,
reg_msr = 0x4,
reg_dsr = 0x4,
reg_fifo = 0x5,
reg_dir = 0x7,
};
enum {
CMD_SENSE_INT = 0x08,
CMD_READ_ID = 0x0a,
CMD_SEEK = 0x0f,
CMD_VERIFY = 0x16,
CMD_READ = 0xe6,
CMD_RELATIVE_SEEK_OUT = 0x8f,
CMD_RELATIVE_SEEK_IN = 0xcf,
};
enum {
BUSY = 0x10,
NONDMA = 0x20,
RQM = 0x80,
DIO = 0x40,
DSKCHG = 0x80,
};
static char *test_image;
#define assert_bit_set(data, mask) g_assert_cmphex((data) & (mask), ==, (mask))
#define assert_bit_clear(data, mask) g_assert_cmphex((data) & (mask), ==, 0)
static uint8_t base = 0x70;
enum {
CMOS_FLOPPY = 0x10,
};
static void floppy_send(uint8_t byte)
{
uint8_t msr;
msr = inb(FLOPPY_BASE + reg_msr);
assert_bit_set(msr, RQM);
assert_bit_clear(msr, DIO);
outb(FLOPPY_BASE + reg_fifo, byte);
}
static uint8_t floppy_recv(void)
{
uint8_t msr;
msr = inb(FLOPPY_BASE + reg_msr);
assert_bit_set(msr, RQM | DIO);
return inb(FLOPPY_BASE + reg_fifo);
}
/* pcn: Present Cylinder Number */
static void ack_irq(uint8_t *pcn)
{
uint8_t ret;
g_assert(get_irq(FLOPPY_IRQ));
floppy_send(CMD_SENSE_INT);
floppy_recv();
ret = floppy_recv();
if (pcn != NULL) {
*pcn = ret;
}
g_assert(!get_irq(FLOPPY_IRQ));
}
static uint8_t send_read_command(uint8_t cmd)
{
uint8_t drive = 0;
uint8_t head = 0;
uint8_t cyl = 0;
uint8_t sect_addr = 1;
uint8_t sect_size = 2;
uint8_t eot = 1;
uint8_t gap = 0x1b;
uint8_t gpl = 0xff;
uint8_t msr = 0;
uint8_t st0;
uint8_t ret = 0;
floppy_send(cmd);
floppy_send(head << 2 | drive);
g_assert(!get_irq(FLOPPY_IRQ));
floppy_send(cyl);
floppy_send(head);
floppy_send(sect_addr);
floppy_send(sect_size);
floppy_send(eot);
floppy_send(gap);
floppy_send(gpl);
uint8_t i = 0;
uint8_t n = 2;
for (; i < n; i++) {
msr = inb(FLOPPY_BASE + reg_msr);
if (msr == 0xd0) {
break;
}
sleep(1);
}
if (i >= n) {
return 1;
}
st0 = floppy_recv();
if (st0 != 0x40) {
ret = 1;
}
floppy_recv();
floppy_recv();
floppy_recv();
floppy_recv();
floppy_recv();
floppy_recv();
return ret;
}
static uint8_t send_read_no_dma_command(int nb_sect, uint8_t expected_st0)
{
uint8_t drive = 0;
uint8_t head = 0;
uint8_t cyl = 0;
uint8_t sect_addr = 1;
uint8_t sect_size = 2;
uint8_t eot = nb_sect;
uint8_t gap = 0x1b;
uint8_t gpl = 0xff;
uint8_t msr = 0;
uint8_t st0;
uint8_t ret = 0;
floppy_send(CMD_READ);
floppy_send(head << 2 | drive);
g_assert(!get_irq(FLOPPY_IRQ));
floppy_send(cyl);
floppy_send(head);
floppy_send(sect_addr);
floppy_send(sect_size);
floppy_send(eot);
floppy_send(gap);
floppy_send(gpl);
uint16_t i = 0;
uint8_t n = 2;
for (; i < n; i++) {
msr = inb(FLOPPY_BASE + reg_msr);
if (msr == (BUSY | NONDMA | DIO | RQM)) {
break;
}
sleep(1);
}
if (i >= n) {
return 1;
}
/* Non-DMA mode */
for (i = 0; i < 512 * 2 * nb_sect; i++) {
msr = inb(FLOPPY_BASE + reg_msr);
assert_bit_set(msr, BUSY | RQM | DIO);
inb(FLOPPY_BASE + reg_fifo);
}
msr = inb(FLOPPY_BASE + reg_msr);
assert_bit_set(msr, BUSY | RQM | DIO);
g_assert(get_irq(FLOPPY_IRQ));
st0 = floppy_recv();
if (st0 != expected_st0) {
ret = 1;
}
floppy_recv();
floppy_recv();
floppy_recv();
floppy_recv();
floppy_recv();
g_assert(get_irq(FLOPPY_IRQ));
floppy_recv();
/* Check that we're back in command phase */
msr = inb(FLOPPY_BASE + reg_msr);
assert_bit_clear(msr, BUSY | DIO);
assert_bit_set(msr, RQM);
g_assert(!get_irq(FLOPPY_IRQ));
return ret;
}
static void send_seek(int cyl)
{
int drive = 0;
int head = 0;
floppy_send(CMD_SEEK);
floppy_send(head << 2 | drive);
g_assert(!get_irq(FLOPPY_IRQ));
floppy_send(cyl);
ack_irq(NULL);
}
static uint8_t cmos_read(uint8_t reg)
{
outb(base + 0, reg);
return inb(base + 1);
}
static void test_cmos(void)
{
uint8_t cmos;
cmos = cmos_read(CMOS_FLOPPY);
g_assert(cmos == 0x40 || cmos == 0x50);
}
static void test_no_media_on_start(void)
{
uint8_t dir;
/* Media changed bit must be set all time after start if there is
* no media in drive. */
dir = inb(FLOPPY_BASE + reg_dir);
assert_bit_set(dir, DSKCHG);
dir = inb(FLOPPY_BASE + reg_dir);
assert_bit_set(dir, DSKCHG);
send_seek(1);
dir = inb(FLOPPY_BASE + reg_dir);
assert_bit_set(dir, DSKCHG);
dir = inb(FLOPPY_BASE + reg_dir);
assert_bit_set(dir, DSKCHG);
}
static void test_read_without_media(void)
{
uint8_t ret;
ret = send_read_command(CMD_READ);
g_assert(ret == 0);
}
static void test_media_insert(void)
{
uint8_t dir;
/* Insert media in drive. DSKCHK should not be reset until a step pulse
* is sent. */
qmp_discard_response("{'execute':'blockdev-change-medium', 'arguments':{"
" 'id':'floppy0', 'filename': %s, 'format': 'raw' }}",
test_image);
dir = inb(FLOPPY_BASE + reg_dir);
assert_bit_set(dir, DSKCHG);
dir = inb(FLOPPY_BASE + reg_dir);
assert_bit_set(dir, DSKCHG);
send_seek(0);
dir = inb(FLOPPY_BASE + reg_dir);
assert_bit_set(dir, DSKCHG);
dir = inb(FLOPPY_BASE + reg_dir);
assert_bit_set(dir, DSKCHG);
/* Step to next track should clear DSKCHG bit. */
send_seek(1);
dir = inb(FLOPPY_BASE + reg_dir);
assert_bit_clear(dir, DSKCHG);
dir = inb(FLOPPY_BASE + reg_dir);
assert_bit_clear(dir, DSKCHG);
}
static void test_media_change(void)
{
uint8_t dir;
test_media_insert();
/* Eject the floppy and check that DSKCHG is set. Reading it out doesn't
* reset the bit. */
qmp_discard_response("{'execute':'eject', 'arguments':{"
" 'id':'floppy0' }}");
dir = inb(FLOPPY_BASE + reg_dir);
assert_bit_set(dir, DSKCHG);
dir = inb(FLOPPY_BASE + reg_dir);
assert_bit_set(dir, DSKCHG);
send_seek(0);
dir = inb(FLOPPY_BASE + reg_dir);
assert_bit_set(dir, DSKCHG);
dir = inb(FLOPPY_BASE + reg_dir);
assert_bit_set(dir, DSKCHG);
send_seek(1);
dir = inb(FLOPPY_BASE + reg_dir);
assert_bit_set(dir, DSKCHG);
dir = inb(FLOPPY_BASE + reg_dir);
assert_bit_set(dir, DSKCHG);
}
static void test_sense_interrupt(void)
{
int drive = 0;
int head = 0;
int cyl = 0;
int ret = 0;
floppy_send(CMD_SENSE_INT);
ret = floppy_recv();
g_assert(ret == 0x80);
floppy_send(CMD_SEEK);
floppy_send(head << 2 | drive);
g_assert(!get_irq(FLOPPY_IRQ));
floppy_send(cyl);
floppy_send(CMD_SENSE_INT);
ret = floppy_recv();
g_assert(ret == 0x20);
floppy_recv();
}
static void test_relative_seek(void)
{
uint8_t drive = 0;
uint8_t head = 0;
uint8_t cyl = 1;
uint8_t pcn;
/* Send seek to track 0 */
send_seek(0);
/* Send relative seek to increase track by 1 */
floppy_send(CMD_RELATIVE_SEEK_IN);
floppy_send(head << 2 | drive);
g_assert(!get_irq(FLOPPY_IRQ));
floppy_send(cyl);
ack_irq(&pcn);
g_assert(pcn == 1);
/* Send relative seek to decrease track by 1 */
floppy_send(CMD_RELATIVE_SEEK_OUT);
floppy_send(head << 2 | drive);
g_assert(!get_irq(FLOPPY_IRQ));
floppy_send(cyl);
ack_irq(&pcn);
g_assert(pcn == 0);
}
static void test_read_id(void)
{
uint8_t drive = 0;
uint8_t head = 0;
uint8_t cyl;
uint8_t st0;
uint8_t msr;
/* Seek to track 0 and check with READ ID */
send_seek(0);
floppy_send(CMD_READ_ID);
g_assert(!get_irq(FLOPPY_IRQ));
floppy_send(head << 2 | drive);
msr = inb(FLOPPY_BASE + reg_msr);
if (!get_irq(FLOPPY_IRQ)) {
assert_bit_set(msr, BUSY);
assert_bit_clear(msr, RQM);
}
while (!get_irq(FLOPPY_IRQ)) {
/* qemu involves a timer with READ ID... */
clock_step(1000000000LL / 50);
}
msr = inb(FLOPPY_BASE + reg_msr);
assert_bit_set(msr, BUSY | RQM | DIO);
st0 = floppy_recv();
floppy_recv();
floppy_recv();
cyl = floppy_recv();
head = floppy_recv();
floppy_recv();
g_assert(get_irq(FLOPPY_IRQ));
floppy_recv();
g_assert(!get_irq(FLOPPY_IRQ));
g_assert_cmpint(cyl, ==, 0);
g_assert_cmpint(head, ==, 0);
g_assert_cmpint(st0, ==, head << 2);
/* Seek to track 8 on head 1 and check with READ ID */
head = 1;
cyl = 8;
floppy_send(CMD_SEEK);
floppy_send(head << 2 | drive);
g_assert(!get_irq(FLOPPY_IRQ));
floppy_send(cyl);
g_assert(get_irq(FLOPPY_IRQ));
ack_irq(NULL);
floppy_send(CMD_READ_ID);
g_assert(!get_irq(FLOPPY_IRQ));
floppy_send(head << 2 | drive);
msr = inb(FLOPPY_BASE + reg_msr);
if (!get_irq(FLOPPY_IRQ)) {
assert_bit_set(msr, BUSY);
assert_bit_clear(msr, RQM);
}
while (!get_irq(FLOPPY_IRQ)) {
/* qemu involves a timer with READ ID... */
clock_step(1000000000LL / 50);
}
msr = inb(FLOPPY_BASE + reg_msr);
assert_bit_set(msr, BUSY | RQM | DIO);
st0 = floppy_recv();
floppy_recv();
floppy_recv();
cyl = floppy_recv();
head = floppy_recv();
floppy_recv();
g_assert(get_irq(FLOPPY_IRQ));
floppy_recv();
g_assert(!get_irq(FLOPPY_IRQ));
g_assert_cmpint(cyl, ==, 8);
g_assert_cmpint(head, ==, 1);
g_assert_cmpint(st0, ==, head << 2);
}
static void test_read_no_dma_1(void)
{
uint8_t ret;
outb(FLOPPY_BASE + reg_dor, inb(FLOPPY_BASE + reg_dor) & ~0x08);
send_seek(0);
ret = send_read_no_dma_command(1, 0x04);
g_assert(ret == 0);
}
static void test_read_no_dma_18(void)
{
uint8_t ret;
outb(FLOPPY_BASE + reg_dor, inb(FLOPPY_BASE + reg_dor) & ~0x08);
send_seek(0);
ret = send_read_no_dma_command(18, 0x04);
g_assert(ret == 0);
}
static void test_read_no_dma_19(void)
{
uint8_t ret;
outb(FLOPPY_BASE + reg_dor, inb(FLOPPY_BASE + reg_dor) & ~0x08);
send_seek(0);
ret = send_read_no_dma_command(19, 0x20);
g_assert(ret == 0);
}
static void test_verify(void)
{
uint8_t ret;
ret = send_read_command(CMD_VERIFY);
g_assert(ret == 0);
}
/* success if no crash or abort */
static void fuzz_registers(void)
{
unsigned int i;
for (i = 0; i < 1000; i++) {
uint8_t reg, val;
reg = (uint8_t)g_test_rand_int_range(0, 8);
val = (uint8_t)g_test_rand_int_range(0, 256);
outb(FLOPPY_BASE + reg, val);
inb(FLOPPY_BASE + reg);
}
}
static bool qtest_check_clang_sanitizer(void)
{
#ifdef QEMU_SANITIZE_ADDRESS
return true;
#else
g_test_skip("QEMU not configured using --enable-sanitizers");
return false;
#endif
}
static void test_cve_2021_20196(void)
{
QTestState *s;
if (!qtest_check_clang_sanitizer()) {
return;
}
s = qtest_initf("-nographic -m 32M -nodefaults " DRIVE_FLOPPY_BLANK);
qtest_outw(s, 0x3f4, 0x0500);
qtest_outb(s, 0x3f5, 0x00);
qtest_outb(s, 0x3f5, 0x00);
qtest_outw(s, 0x3f4, 0x0000);
qtest_outb(s, 0x3f5, 0x00);
qtest_outw(s, 0x3f1, 0x0400);
qtest_outw(s, 0x3f4, 0x0000);
qtest_outw(s, 0x3f4, 0x0000);
qtest_outb(s, 0x3f5, 0x00);
qtest_outb(s, 0x3f5, 0x01);
qtest_outw(s, 0x3f1, 0x0500);
qtest_outb(s, 0x3f5, 0x00);
qtest_quit(s);
}
tests/qtest/fdc-test: Add a regression test for CVE-2021-3507 Add the reproducer from https://gitlab.com/qemu-project/qemu/-/issues/339 Without the previous commit, when running 'make check-qtest-i386' with QEMU configured with '--enable-sanitizers' we get: ==4028352==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x619000062a00 at pc 0x5626d03c491a bp 0x7ffdb4199410 sp 0x7ffdb4198bc0 READ of size 786432 at 0x619000062a00 thread T0 #0 0x5626d03c4919 in __asan_memcpy (qemu-system-i386+0x1e65919) #1 0x5626d1c023cc in flatview_write_continue softmmu/physmem.c:2787:13 #2 0x5626d1bf0c0f in flatview_write softmmu/physmem.c:2822:14 #3 0x5626d1bf0798 in address_space_write softmmu/physmem.c:2914:18 #4 0x5626d1bf0f37 in address_space_rw softmmu/physmem.c:2924:16 #5 0x5626d1bf14c8 in cpu_physical_memory_rw softmmu/physmem.c:2933:5 #6 0x5626d0bd5649 in cpu_physical_memory_write include/exec/cpu-common.h:82:5 #7 0x5626d0bd0a07 in i8257_dma_write_memory hw/dma/i8257.c:452:9 #8 0x5626d09f825d in fdctrl_transfer_handler hw/block/fdc.c:1616:13 #9 0x5626d0a048b4 in fdctrl_start_transfer hw/block/fdc.c:1539:13 #10 0x5626d09f4c3e in fdctrl_write_data hw/block/fdc.c:2266:13 #11 0x5626d09f22f7 in fdctrl_write hw/block/fdc.c:829:9 #12 0x5626d1c20bc5 in portio_write softmmu/ioport.c:207:17 0x619000062a00 is located 0 bytes to the right of 512-byte region [0x619000062800,0x619000062a00) allocated by thread T0 here: #0 0x5626d03c66ec in posix_memalign (qemu-system-i386+0x1e676ec) #1 0x5626d2b988d4 in qemu_try_memalign util/oslib-posix.c:210:11 #2 0x5626d2b98b0c in qemu_memalign util/oslib-posix.c:226:27 #3 0x5626d09fbaf0 in fdctrl_realize_common hw/block/fdc.c:2341:20 #4 0x5626d0a150ed in isabus_fdc_realize hw/block/fdc-isa.c:113:5 #5 0x5626d2367935 in device_set_realized hw/core/qdev.c:531:13 SUMMARY: AddressSanitizer: heap-buffer-overflow (qemu-system-i386+0x1e65919) in __asan_memcpy Shadow bytes around the buggy address: 0x0c32800044f0: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x0c3280004500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0c3280004510: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0c3280004520: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0c3280004530: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 =>0x0c3280004540:[fa]fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x0c3280004550: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x0c3280004560: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x0c3280004570: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x0c3280004580: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x0c3280004590: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd Shadow byte legend (one shadow byte represents 8 application bytes): Addressable: 00 Heap left redzone: fa Freed heap region: fd ==4028352==ABORTING [ kwolf: Added snapshot=on to prevent write file lock failure ] Reported-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-11-18 14:57:33 +03:00
static void test_cve_2021_3507(void)
{
QTestState *s;
s = qtest_initf("-nographic -m 32M -nodefaults "
"-drive file=%s,format=raw,if=floppy,snapshot=on",
test_image);
qtest_outl(s, 0x9, 0x0a0206);
qtest_outw(s, 0x3f4, 0x1600);
qtest_outw(s, 0x3f4, 0x0000);
qtest_outw(s, 0x3f4, 0x0000);
qtest_outw(s, 0x3f4, 0x0000);
qtest_outw(s, 0x3f4, 0x0200);
qtest_outw(s, 0x3f4, 0x0200);
qtest_outw(s, 0x3f4, 0x0000);
qtest_outw(s, 0x3f4, 0x0000);
qtest_outw(s, 0x3f4, 0x0000);
qtest_quit(s);
}
int main(int argc, char **argv)
{
int fd;
int ret;
/* Create a temporary raw image */
fd = g_file_open_tmp("qtest.XXXXXX", &test_image, NULL);
g_assert(fd >= 0);
ret = ftruncate(fd, TEST_IMAGE_SIZE);
g_assert(ret == 0);
close(fd);
/* Run the tests */
g_test_init(&argc, &argv, NULL);
qtest_start("-machine pc -device floppy,id=floppy0");
qtest_irq_intercept_in(global_qtest, "ioapic");
qtest_add_func("/fdc/cmos", test_cmos);
qtest_add_func("/fdc/no_media_on_start", test_no_media_on_start);
qtest_add_func("/fdc/read_without_media", test_read_without_media);
qtest_add_func("/fdc/media_change", test_media_change);
qtest_add_func("/fdc/sense_interrupt", test_sense_interrupt);
qtest_add_func("/fdc/relative_seek", test_relative_seek);
qtest_add_func("/fdc/read_id", test_read_id);
qtest_add_func("/fdc/verify", test_verify);
qtest_add_func("/fdc/media_insert", test_media_insert);
qtest_add_func("/fdc/read_no_dma_1", test_read_no_dma_1);
qtest_add_func("/fdc/read_no_dma_18", test_read_no_dma_18);
qtest_add_func("/fdc/read_no_dma_19", test_read_no_dma_19);
qtest_add_func("/fdc/fuzz-registers", fuzz_registers);
qtest_add_func("/fdc/fuzz/cve_2021_20196", test_cve_2021_20196);
tests/qtest/fdc-test: Add a regression test for CVE-2021-3507 Add the reproducer from https://gitlab.com/qemu-project/qemu/-/issues/339 Without the previous commit, when running 'make check-qtest-i386' with QEMU configured with '--enable-sanitizers' we get: ==4028352==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x619000062a00 at pc 0x5626d03c491a bp 0x7ffdb4199410 sp 0x7ffdb4198bc0 READ of size 786432 at 0x619000062a00 thread T0 #0 0x5626d03c4919 in __asan_memcpy (qemu-system-i386+0x1e65919) #1 0x5626d1c023cc in flatview_write_continue softmmu/physmem.c:2787:13 #2 0x5626d1bf0c0f in flatview_write softmmu/physmem.c:2822:14 #3 0x5626d1bf0798 in address_space_write softmmu/physmem.c:2914:18 #4 0x5626d1bf0f37 in address_space_rw softmmu/physmem.c:2924:16 #5 0x5626d1bf14c8 in cpu_physical_memory_rw softmmu/physmem.c:2933:5 #6 0x5626d0bd5649 in cpu_physical_memory_write include/exec/cpu-common.h:82:5 #7 0x5626d0bd0a07 in i8257_dma_write_memory hw/dma/i8257.c:452:9 #8 0x5626d09f825d in fdctrl_transfer_handler hw/block/fdc.c:1616:13 #9 0x5626d0a048b4 in fdctrl_start_transfer hw/block/fdc.c:1539:13 #10 0x5626d09f4c3e in fdctrl_write_data hw/block/fdc.c:2266:13 #11 0x5626d09f22f7 in fdctrl_write hw/block/fdc.c:829:9 #12 0x5626d1c20bc5 in portio_write softmmu/ioport.c:207:17 0x619000062a00 is located 0 bytes to the right of 512-byte region [0x619000062800,0x619000062a00) allocated by thread T0 here: #0 0x5626d03c66ec in posix_memalign (qemu-system-i386+0x1e676ec) #1 0x5626d2b988d4 in qemu_try_memalign util/oslib-posix.c:210:11 #2 0x5626d2b98b0c in qemu_memalign util/oslib-posix.c:226:27 #3 0x5626d09fbaf0 in fdctrl_realize_common hw/block/fdc.c:2341:20 #4 0x5626d0a150ed in isabus_fdc_realize hw/block/fdc-isa.c:113:5 #5 0x5626d2367935 in device_set_realized hw/core/qdev.c:531:13 SUMMARY: AddressSanitizer: heap-buffer-overflow (qemu-system-i386+0x1e65919) in __asan_memcpy Shadow bytes around the buggy address: 0x0c32800044f0: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x0c3280004500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0c3280004510: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0c3280004520: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0c3280004530: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 =>0x0c3280004540:[fa]fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x0c3280004550: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x0c3280004560: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x0c3280004570: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x0c3280004580: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x0c3280004590: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd Shadow byte legend (one shadow byte represents 8 application bytes): Addressable: 00 Heap left redzone: fa Freed heap region: fd ==4028352==ABORTING [ kwolf: Added snapshot=on to prevent write file lock failure ] Reported-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-11-18 14:57:33 +03:00
qtest_add_func("/fdc/fuzz/cve_2021_3507", test_cve_2021_3507);
ret = g_test_run();
/* Cleanup */
qtest_end();
unlink(test_image);
g_free(test_image);
return ret;
}