qemu/hw/display/bcm2835_fb.c

471 lines
14 KiB
C
Raw Normal View History

/*
* Raspberry Pi emulation (c) 2012 Gregory Estrade
* Refactoring for Pi2 Copyright (c) 2015, Microsoft. Written by Andrew Baumann.
*
* Heavily based on milkymist-vgafb.c, copyright terms below:
* QEMU model of the Milkymist VGA framebuffer.
*
* Copyright (c) 2010-2012 Michael Walle <michael@walle.cc>
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*
*/
#include "qemu/osdep.h"
2016-03-14 11:01:28 +03:00
#include "qapi/error.h"
#include "hw/display/bcm2835_fb.h"
#include "hw/hw.h"
#include "hw/irq.h"
#include "framebuffer.h"
#include "ui/pixel_ops.h"
#include "hw/misc/bcm2835_mbox_defs.h"
#include "hw/qdev-properties.h"
#include "migration/vmstate.h"
#include "qemu/log.h"
#include "qemu/module.h"
#define DEFAULT_VCRAM_SIZE 0x4000000
#define BCM2835_FB_OFFSET 0x00100000
/* Maximum permitted framebuffer size; experimentally determined on an rpi2 */
#define XRES_MAX 3840
#define YRES_MAX 2560
/* Framebuffer size used if guest requests zero size */
#define XRES_SMALL 592
#define YRES_SMALL 488
static void fb_invalidate_display(void *opaque)
{
BCM2835FBState *s = BCM2835_FB(opaque);
s->invalidate = true;
}
static void draw_line_src16(void *opaque, uint8_t *dst, const uint8_t *src,
int width, int deststep)
{
BCM2835FBState *s = opaque;
uint16_t rgb565;
uint32_t rgb888;
uint8_t r, g, b;
DisplaySurface *surface = qemu_console_surface(s->con);
int bpp = surface_bits_per_pixel(surface);
while (width--) {
switch (s->config.bpp) {
case 8:
/* lookup palette starting at video ram base
* TODO: cache translation, rather than doing this each time!
*/
rgb888 = ldl_le_phys(&s->dma_as, s->vcram_base + (*src << 2));
r = (rgb888 >> 0) & 0xff;
g = (rgb888 >> 8) & 0xff;
b = (rgb888 >> 16) & 0xff;
src++;
break;
case 16:
rgb565 = lduw_le_p(src);
r = ((rgb565 >> 11) & 0x1f) << 3;
g = ((rgb565 >> 5) & 0x3f) << 2;
b = ((rgb565 >> 0) & 0x1f) << 3;
src += 2;
break;
case 24:
rgb888 = ldl_le_p(src);
r = (rgb888 >> 0) & 0xff;
g = (rgb888 >> 8) & 0xff;
b = (rgb888 >> 16) & 0xff;
src += 3;
break;
case 32:
rgb888 = ldl_le_p(src);
r = (rgb888 >> 0) & 0xff;
g = (rgb888 >> 8) & 0xff;
b = (rgb888 >> 16) & 0xff;
src += 4;
break;
default:
r = 0;
g = 0;
b = 0;
break;
}
if (s->config.pixo == 0) {
/* swap to BGR pixel format */
uint8_t tmp = r;
r = b;
b = tmp;
}
switch (bpp) {
case 8:
*dst++ = rgb_to_pixel8(r, g, b);
break;
case 15:
*(uint16_t *)dst = rgb_to_pixel15(r, g, b);
dst += 2;
break;
case 16:
*(uint16_t *)dst = rgb_to_pixel16(r, g, b);
dst += 2;
break;
case 24:
rgb888 = rgb_to_pixel24(r, g, b);
*dst++ = rgb888 & 0xff;
*dst++ = (rgb888 >> 8) & 0xff;
*dst++ = (rgb888 >> 16) & 0xff;
break;
case 32:
*(uint32_t *)dst = rgb_to_pixel32(r, g, b);
dst += 4;
break;
default:
return;
}
}
}
static bool fb_use_offsets(BCM2835FBConfig *config)
{
/*
* Return true if we should use the viewport offsets.
* Experimentally, the hardware seems to do this only if the
* viewport size is larger than the physical screen. (It doesn't
* prevent the guest setting this silly viewport setting, though...)
*/
return config->xres_virtual > config->xres &&
config->yres_virtual > config->yres;
}
static void fb_update_display(void *opaque)
{
BCM2835FBState *s = opaque;
DisplaySurface *surface = qemu_console_surface(s->con);
int first = 0;
int last = 0;
int src_width = 0;
int dest_width = 0;
uint32_t xoff = 0, yoff = 0;
if (s->lock || !s->config.xres) {
return;
}
src_width = bcm2835_fb_get_pitch(&s->config);
if (fb_use_offsets(&s->config)) {
xoff = s->config.xoffset;
yoff = s->config.yoffset;
}
dest_width = s->config.xres;
switch (surface_bits_per_pixel(surface)) {
case 0:
return;
case 8:
break;
case 15:
dest_width *= 2;
break;
case 16:
dest_width *= 2;
break;
case 24:
dest_width *= 3;
break;
case 32:
dest_width *= 4;
break;
default:
hw_error("bcm2835_fb: bad color depth\n");
break;
}
if (s->invalidate) {
hwaddr base = s->config.base + xoff + (hwaddr)yoff * src_width;
framebuffer_update_memory_section(&s->fbsection, s->dma_mr,
base,
s->config.yres, src_width);
}
framebuffer_update_display(surface, &s->fbsection,
s->config.xres, s->config.yres,
src_width, dest_width, 0, s->invalidate,
draw_line_src16, s, &first, &last);
if (first >= 0) {
dpy_gfx_update(s->con, 0, first, s->config.xres,
last - first + 1);
}
s->invalidate = false;
}
void bcm2835_fb_validate_config(BCM2835FBConfig *config)
{
/*
* Validate the config, and clip any bogus values into range,
* as the hardware does. Note that fb_update_display() relies on
* this happening to prevent it from performing out-of-range
* accesses on redraw.
*/
config->xres = MIN(config->xres, XRES_MAX);
config->xres_virtual = MIN(config->xres_virtual, XRES_MAX);
config->yres = MIN(config->yres, YRES_MAX);
config->yres_virtual = MIN(config->yres_virtual, YRES_MAX);
/*
* These are not minima: a 40x40 framebuffer will be accepted.
* They're only used as defaults if the guest asks for zero size.
*/
if (config->xres == 0) {
config->xres = XRES_SMALL;
}
if (config->yres == 0) {
config->yres = YRES_SMALL;
}
if (config->xres_virtual == 0) {
config->xres_virtual = config->xres;
}
if (config->yres_virtual == 0) {
config->yres_virtual = config->yres;
}
if (fb_use_offsets(config)) {
/* Clip the offsets so the viewport is within the physical screen */
config->xoffset = MIN(config->xoffset,
config->xres_virtual - config->xres);
config->yoffset = MIN(config->yoffset,
config->yres_virtual - config->yres);
}
}
void bcm2835_fb_reconfigure(BCM2835FBState *s, BCM2835FBConfig *newconfig)
{
s->lock = true;
s->config = *newconfig;
s->invalidate = true;
qemu_console_resize(s->con, s->config.xres, s->config.yres);
s->lock = false;
}
static void bcm2835_fb_mbox_push(BCM2835FBState *s, uint32_t value)
{
uint32_t pitch;
uint32_t size;
BCM2835FBConfig newconf;
value &= ~0xf;
newconf.xres = ldl_le_phys(&s->dma_as, value);
newconf.yres = ldl_le_phys(&s->dma_as, value + 4);
newconf.xres_virtual = ldl_le_phys(&s->dma_as, value + 8);
newconf.yres_virtual = ldl_le_phys(&s->dma_as, value + 12);
newconf.bpp = ldl_le_phys(&s->dma_as, value + 20);
newconf.xoffset = ldl_le_phys(&s->dma_as, value + 24);
newconf.yoffset = ldl_le_phys(&s->dma_as, value + 28);
newconf.base = s->vcram_base | (value & 0xc0000000);
newconf.base += BCM2835_FB_OFFSET;
/* Copy fields which we don't want to change from the existing config */
newconf.pixo = s->config.pixo;
newconf.alpha = s->config.alpha;
bcm2835_fb_validate_config(&newconf);
pitch = bcm2835_fb_get_pitch(&newconf);
size = bcm2835_fb_get_size(&newconf);
stl_le_phys(&s->dma_as, value + 16, pitch);
stl_le_phys(&s->dma_as, value + 32, newconf.base);
stl_le_phys(&s->dma_as, value + 36, size);
bcm2835_fb_reconfigure(s, &newconf);
}
static uint64_t bcm2835_fb_read(void *opaque, hwaddr offset, unsigned size)
{
BCM2835FBState *s = opaque;
uint32_t res = 0;
switch (offset) {
case MBOX_AS_DATA:
res = MBOX_CHAN_FB;
s->pending = false;
qemu_set_irq(s->mbox_irq, 0);
break;
case MBOX_AS_PENDING:
res = s->pending;
break;
default:
qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset %"HWADDR_PRIx"\n",
__func__, offset);
return 0;
}
return res;
}
static void bcm2835_fb_write(void *opaque, hwaddr offset, uint64_t value,
unsigned size)
{
BCM2835FBState *s = opaque;
switch (offset) {
case MBOX_AS_DATA:
/* bcm2835_mbox should check our pending status before pushing */
assert(!s->pending);
s->pending = true;
bcm2835_fb_mbox_push(s, value);
qemu_set_irq(s->mbox_irq, 1);
break;
default:
qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset %"HWADDR_PRIx"\n",
__func__, offset);
return;
}
}
static const MemoryRegionOps bcm2835_fb_ops = {
.read = bcm2835_fb_read,
.write = bcm2835_fb_write,
.endianness = DEVICE_NATIVE_ENDIAN,
.valid.min_access_size = 4,
.valid.max_access_size = 4,
};
static const VMStateDescription vmstate_bcm2835_fb = {
.name = TYPE_BCM2835_FB,
.version_id = 1,
.minimum_version_id = 1,
.fields = (VMStateField[]) {
VMSTATE_BOOL(lock, BCM2835FBState),
VMSTATE_BOOL(invalidate, BCM2835FBState),
VMSTATE_BOOL(pending, BCM2835FBState),
VMSTATE_UINT32(config.xres, BCM2835FBState),
VMSTATE_UINT32(config.yres, BCM2835FBState),
VMSTATE_UINT32(config.xres_virtual, BCM2835FBState),
VMSTATE_UINT32(config.yres_virtual, BCM2835FBState),
VMSTATE_UINT32(config.xoffset, BCM2835FBState),
VMSTATE_UINT32(config.yoffset, BCM2835FBState),
VMSTATE_UINT32(config.bpp, BCM2835FBState),
VMSTATE_UINT32(config.base, BCM2835FBState),
VMSTATE_UNUSED(8), /* Was pitch and size */
VMSTATE_UINT32(config.pixo, BCM2835FBState),
VMSTATE_UINT32(config.alpha, BCM2835FBState),
VMSTATE_END_OF_LIST()
}
};
static const GraphicHwOps vgafb_ops = {
.invalidate = fb_invalidate_display,
.gfx_update = fb_update_display,
};
static void bcm2835_fb_init(Object *obj)
{
BCM2835FBState *s = BCM2835_FB(obj);
memory_region_init_io(&s->iomem, obj, &bcm2835_fb_ops, s, TYPE_BCM2835_FB,
0x10);
sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->iomem);
sysbus_init_irq(SYS_BUS_DEVICE(s), &s->mbox_irq);
}
static void bcm2835_fb_reset(DeviceState *dev)
{
BCM2835FBState *s = BCM2835_FB(dev);
s->pending = false;
s->config = s->initial_config;
s->invalidate = true;
s->lock = false;
}
static void bcm2835_fb_realize(DeviceState *dev, Error **errp)
{
BCM2835FBState *s = BCM2835_FB(dev);
Object *obj;
if (s->vcram_base == 0) {
error_setg(errp, "%s: required vcram-base property not set", __func__);
return;
}
obj = object_property_get_link(OBJECT(dev), "dma-mr", &error_abort);
/* Fill in the parts of initial_config that are not set by QOM properties */
s->initial_config.xres_virtual = s->initial_config.xres;
s->initial_config.yres_virtual = s->initial_config.yres;
s->initial_config.xoffset = 0;
s->initial_config.yoffset = 0;
s->initial_config.base = s->vcram_base + BCM2835_FB_OFFSET;
s->dma_mr = MEMORY_REGION(obj);
hw/arm/bcm2835_peripherals: Name various address spaces Various address spaces from the BCM2835 are reported as 'anonymous' in memory tree: (qemu) info mtree address-space: anonymous 0000000000000000-000000000000008f (prio 0, i/o): bcm2835-mbox 0000000000000010-000000000000001f (prio 0, i/o): bcm2835-fb 0000000000000080-000000000000008f (prio 0, i/o): bcm2835-property address-space: anonymous 0000000000000000-00000000ffffffff (prio 0, i/o): bcm2835-gpu 0000000000000000-000000003fffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff 0000000040000000-000000007fffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff 000000007e000000-000000007effffff (prio 1, i/o): alias bcm2835-peripherals @bcm2835-peripherals 0000000000000000-0000000000ffffff 0000000080000000-00000000bfffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff 00000000c0000000-00000000ffffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff [...] Since the address_space_init() function takes a 'name' argument, set it to correctly describe each address space: (qemu) info mtree address-space: bcm2835-mbox-memory 0000000000000000-000000000000008f (prio 0, i/o): bcm2835-mbox 0000000000000010-000000000000001f (prio 0, i/o): bcm2835-fb 0000000000000080-000000000000008f (prio 0, i/o): bcm2835-property address-space: bcm2835-fb-memory 0000000000000000-00000000ffffffff (prio 0, i/o): bcm2835-gpu 0000000000000000-000000003fffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff 0000000040000000-000000007fffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff 000000007e000000-000000007effffff (prio 1, i/o): alias bcm2835-peripherals @bcm2835-peripherals 0000000000000000-0000000000ffffff 0000000080000000-00000000bfffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff 00000000c0000000-00000000ffffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff address-space: bcm2835-property-memory 0000000000000000-00000000ffffffff (prio 0, i/o): bcm2835-gpu 0000000000000000-000000003fffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff 0000000040000000-000000007fffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff 000000007e000000-000000007effffff (prio 1, i/o): alias bcm2835-peripherals @bcm2835-peripherals 0000000000000000-0000000000ffffff 0000000080000000-00000000bfffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff 00000000c0000000-00000000ffffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff address-space: bcm2835-dma-memory 0000000000000000-00000000ffffffff (prio 0, i/o): bcm2835-gpu 0000000000000000-000000003fffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff 0000000040000000-000000007fffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff 000000007e000000-000000007effffff (prio 1, i/o): alias bcm2835-peripherals @bcm2835-peripherals 0000000000000000-0000000000ffffff 0000000080000000-00000000bfffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff 00000000c0000000-00000000ffffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Cleber Rosa <crosa@redhat.com> Message-id: 20190926173428.10713-4-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-26 20:34:11 +03:00
address_space_init(&s->dma_as, s->dma_mr, TYPE_BCM2835_FB "-memory");
bcm2835_fb_reset(dev);
s->con = graphic_console_init(dev, 0, &vgafb_ops, s);
qemu_console_resize(s->con, s->config.xres, s->config.yres);
}
static Property bcm2835_fb_props[] = {
DEFINE_PROP_UINT32("vcram-base", BCM2835FBState, vcram_base, 0),/*required*/
DEFINE_PROP_UINT32("vcram-size", BCM2835FBState, vcram_size,
DEFAULT_VCRAM_SIZE),
DEFINE_PROP_UINT32("xres", BCM2835FBState, initial_config.xres, 640),
DEFINE_PROP_UINT32("yres", BCM2835FBState, initial_config.yres, 480),
DEFINE_PROP_UINT32("bpp", BCM2835FBState, initial_config.bpp, 16),
DEFINE_PROP_UINT32("pixo", BCM2835FBState,
initial_config.pixo, 1), /* 1=RGB, 0=BGR */
DEFINE_PROP_UINT32("alpha", BCM2835FBState,
initial_config.alpha, 2), /* alpha ignored */
DEFINE_PROP_END_OF_LIST()
};
static void bcm2835_fb_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
device_class_set_props(dc, bcm2835_fb_props);
dc->realize = bcm2835_fb_realize;
dc->reset = bcm2835_fb_reset;
dc->vmsd = &vmstate_bcm2835_fb;
}
static TypeInfo bcm2835_fb_info = {
.name = TYPE_BCM2835_FB,
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(BCM2835FBState),
.class_init = bcm2835_fb_class_init,
.instance_init = bcm2835_fb_init,
};
static void bcm2835_fb_register_types(void)
{
type_register_static(&bcm2835_fb_info);
}
type_init(bcm2835_fb_register_types)