qemu/hw/ppc/spapr_cpu_core.c

423 lines
12 KiB
C
Raw Normal View History

/*
* sPAPR CPU core device, acts as container of CPU thread devices.
*
* Copyright (C) 2016 Bharata B Rao <bharata@linux.vnet.ibm.com>
*
* This work is licensed under the terms of the GNU GPL, version 2 or later.
* See the COPYING file in the top-level directory.
*/
#include "qemu/osdep.h"
#include "hw/cpu/core.h"
#include "hw/ppc/spapr_cpu_core.h"
#include "hw/qdev-properties.h"
#include "migration/vmstate.h"
#include "target/ppc/cpu.h"
#include "hw/ppc/spapr.h"
#include "qapi/error.h"
#include "sysemu/cpus.h"
#include "sysemu/kvm.h"
#include "target/ppc/kvm_ppc.h"
#include "hw/ppc/ppc.h"
#include "target/ppc/mmu-hash64.h"
#include "sysemu/numa.h"
#include "sysemu/reset.h"
#include "sysemu/hw_accel.h"
#include "qemu/error-report.h"
static void spapr_reset_vcpu(PowerPCCPU *cpu)
{
CPUState *cs = CPU(cpu);
CPUPPCState *env = &cpu->env;
PowerPCCPUClass *pcc = POWERPC_CPU_GET_CLASS(cpu);
spapr: Use CamelCase properly The qemu coding standard is to use CamelCase for type and structure names, and the pseries code follows that... sort of. There are quite a lot of places where we bend the rules in order to preserve the capitalization of internal acronyms like "PHB", "TCE", "DIMM" and most commonly "sPAPR". That was a bad idea - it frequently leads to names ending up with hard to read clusters of capital letters, and means they don't catch the eye as type identifiers, which is kind of the point of the CamelCase convention in the first place. In short, keeping type identifiers look like CamelCase is more important than preserving standard capitalization of internal "words". So, this patch renames a heap of spapr internal type names to a more standard CamelCase. In addition to case changes, we also make some other identifier renames: VIOsPAPR* -> SpaprVio* The reverse word ordering was only ever used to mitigate the capital cluster, so revert to the natural ordering. VIOsPAPRVTYDevice -> SpaprVioVty VIOsPAPRVLANDevice -> SpaprVioVlan Brevity, since the "Device" didn't add useful information sPAPRDRConnector -> SpaprDrc sPAPRDRConnectorClass -> SpaprDrcClass Brevity, and makes it clearer this is the same thing as a "DRC" mentioned in many other places in the code This is 100% a mechanical search-and-replace patch. It will, however, conflict with essentially any and all outstanding patches touching the spapr code. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-06 07:35:37 +03:00
SpaprCpuState *spapr_cpu = spapr_cpu_state(cpu);
target_ulong lpcr;
SpaprMachineState *spapr = SPAPR_MACHINE(qdev_get_machine());
cpu_reset(cs);
/* All CPUs start halted. CPU0 is unhalted from the machine level
* reset code and the rest are explicitly started up by the guest
* using an RTAS call */
cs->halted = 1;
env->spr[SPR_HIOR] = 0;
lpcr = env->spr[SPR_LPCR];
/* Set emulated LPCR to not send interrupts to hypervisor. Note that
* under KVM, the actual HW LPCR will be set differently by KVM itself,
* the settings below ensure proper operations with TCG in absence of
* a real hypervisor.
*
* Clearing VPM0 will also cause us to use RMOR in mmu-hash64.c for
* real mode accesses, which thankfully defaults to 0 and isn't
* accessible in guest mode.
*
* Disable Power-saving mode Exit Cause exceptions for the CPU, so
* we don't get spurious wakups before an RTAS start-cpu call.
target/ppc: Set PSSCR_EC on cpu halt to prevent spurious wakeup The processor stop status and control register (PSSCR) is used to control the power saving facilities of the thread. The exit criterion bit (EC) is used to specify whether the thread should be woken by any interrupt (EC == 0) or only an interrupt enabled in the LPCR to wake the thread (EC == 1). The rtas facilities start-cpu and self-stop are used to transition a vcpu between the stopped and running states. When a vcpu is stopped it may only be started again by the start-cpu rtas call. Currently a vcpu in the stopped state will start again whenever an interrupt comes along due to PSSCR_EC being cleared, and while this is architecturally correct for a hardware thread, a vcpu is expected to only be woken by calling start-cpu. This means when performing a reboot on a tcg machine that the secondary threads will restart while the primary is still in slof, this is unsupported and causes call traces like: SLOF ********************************************************************** QEMU Starting Build Date = Jan 14 2019 18:00:39 FW Version = git-a5b428e1c1eae703 Press "s" to enter Open Firmware. qemu: fatal: Trying to deliver HV exception (MSR) 70 with no HV support NIP 6d61676963313230 LR 000000003dbe0308 CTR 6d61676963313233 XER 0000000000000000 CPU#1 MSR 0000000000000000 HID0 0000000000000000 HF 0000000000000000 iidx 3 didx 3 TB 00000026 115746031956 DECR 18446744073326238463 GPR00 000000003dbe0308 000000003e669fe0 000000003dc10700 0000000000000003 GPR04 000000003dc62198 000000003dc62178 000000003dc0ea48 0000000000000030 GPR08 000000003dc621a8 0000000000000018 000000003e466008 000000003dc50700 GPR12 c00000000093a4e0 c00000003ffff300 c00000003e533f90 0000000000000000 GPR16 0000000000000000 0000000000000000 000000003e466010 000000003dc0b040 GPR20 0000000000008000 000000000000f003 0000000000000006 000000003e66a050 GPR24 000000003dc06400 000000003dc0ae70 0000000000000003 000000000000f001 GPR28 000000003e66a060 ffffffffffffffff 6d61676963313233 0000000000000028 CR 28000222 [ E L - - - E E E ] RES ffffffffffffffff FPR00 0000000000000000 0000000000000000 0000000000000000 0000000000000000 FPR04 0000000000000000 0000000000000000 0000000000000000 0000000000000000 FPR08 0000000000000000 0000000000000000 0000000000000000 00000000311825e0 FPR12 00000000311825e0 0000000000000000 0000000000000000 0000000000000000 FPR16 0000000000000000 0000000000000000 0000000000000000 0000000000000000 FPR20 0000000000000000 0000000000000000 0000000000000000 0000000000000000 FPR24 0000000000000000 0000000000000000 0000000000000000 0000000000000000 FPR28 0000000000000000 0000000000000000 0000000000000000 0000000000000000 FPSCR 0000000000000000 SRR0 000000003dbe06b0 SRR1 0000000000080000 PVR 00000000004e1200 VRSAVE 0000000000000000 SPRG0 000000003dbe0308 SPRG1 000000003e669fe0 SPRG2 00000000000000d8 SPRG3 000000003dbe0308 SPRG4 0000000000000000 SPRG5 0000000000000000 SPRG6 0000000000000000 SPRG7 0000000000000000 HSRR0 6d61676963313230 HSRR1 0000000000000000 CFAR 000000003dbe3e64 LPCR 0000000004020008 PTCR 0000000000000000 DAR 0000000000000000 DSISR 0000000000000000 Aborted (core dumped) To fix this, set the PSSCR_EC bit when a vcpu is stopped to disable it from coming back online until the start-cpu rtas call is made. Fixes: 21c0d66a9c99 ("target/ppc: Fix support for "STOP light" states on POWER9") Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Message-Id: <20190516005744.24366-1-sjitindarsingh@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-05-16 03:57:44 +03:00
* For the same reason, set PSSCR_EC.
*/
lpcr &= ~(LPCR_VPM0 | LPCR_VPM1 | LPCR_ISL | LPCR_KBV | pcc->lpcr_pm);
lpcr |= LPCR_LPES0 | LPCR_LPES1;
target/ppc: Set PSSCR_EC on cpu halt to prevent spurious wakeup The processor stop status and control register (PSSCR) is used to control the power saving facilities of the thread. The exit criterion bit (EC) is used to specify whether the thread should be woken by any interrupt (EC == 0) or only an interrupt enabled in the LPCR to wake the thread (EC == 1). The rtas facilities start-cpu and self-stop are used to transition a vcpu between the stopped and running states. When a vcpu is stopped it may only be started again by the start-cpu rtas call. Currently a vcpu in the stopped state will start again whenever an interrupt comes along due to PSSCR_EC being cleared, and while this is architecturally correct for a hardware thread, a vcpu is expected to only be woken by calling start-cpu. This means when performing a reboot on a tcg machine that the secondary threads will restart while the primary is still in slof, this is unsupported and causes call traces like: SLOF ********************************************************************** QEMU Starting Build Date = Jan 14 2019 18:00:39 FW Version = git-a5b428e1c1eae703 Press "s" to enter Open Firmware. qemu: fatal: Trying to deliver HV exception (MSR) 70 with no HV support NIP 6d61676963313230 LR 000000003dbe0308 CTR 6d61676963313233 XER 0000000000000000 CPU#1 MSR 0000000000000000 HID0 0000000000000000 HF 0000000000000000 iidx 3 didx 3 TB 00000026 115746031956 DECR 18446744073326238463 GPR00 000000003dbe0308 000000003e669fe0 000000003dc10700 0000000000000003 GPR04 000000003dc62198 000000003dc62178 000000003dc0ea48 0000000000000030 GPR08 000000003dc621a8 0000000000000018 000000003e466008 000000003dc50700 GPR12 c00000000093a4e0 c00000003ffff300 c00000003e533f90 0000000000000000 GPR16 0000000000000000 0000000000000000 000000003e466010 000000003dc0b040 GPR20 0000000000008000 000000000000f003 0000000000000006 000000003e66a050 GPR24 000000003dc06400 000000003dc0ae70 0000000000000003 000000000000f001 GPR28 000000003e66a060 ffffffffffffffff 6d61676963313233 0000000000000028 CR 28000222 [ E L - - - E E E ] RES ffffffffffffffff FPR00 0000000000000000 0000000000000000 0000000000000000 0000000000000000 FPR04 0000000000000000 0000000000000000 0000000000000000 0000000000000000 FPR08 0000000000000000 0000000000000000 0000000000000000 00000000311825e0 FPR12 00000000311825e0 0000000000000000 0000000000000000 0000000000000000 FPR16 0000000000000000 0000000000000000 0000000000000000 0000000000000000 FPR20 0000000000000000 0000000000000000 0000000000000000 0000000000000000 FPR24 0000000000000000 0000000000000000 0000000000000000 0000000000000000 FPR28 0000000000000000 0000000000000000 0000000000000000 0000000000000000 FPSCR 0000000000000000 SRR0 000000003dbe06b0 SRR1 0000000000080000 PVR 00000000004e1200 VRSAVE 0000000000000000 SPRG0 000000003dbe0308 SPRG1 000000003e669fe0 SPRG2 00000000000000d8 SPRG3 000000003dbe0308 SPRG4 0000000000000000 SPRG5 0000000000000000 SPRG6 0000000000000000 SPRG7 0000000000000000 HSRR0 6d61676963313230 HSRR1 0000000000000000 CFAR 000000003dbe3e64 LPCR 0000000004020008 PTCR 0000000000000000 DAR 0000000000000000 DSISR 0000000000000000 Aborted (core dumped) To fix this, set the PSSCR_EC bit when a vcpu is stopped to disable it from coming back online until the start-cpu rtas call is made. Fixes: 21c0d66a9c99 ("target/ppc: Fix support for "STOP light" states on POWER9") Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Message-Id: <20190516005744.24366-1-sjitindarsingh@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-05-16 03:57:44 +03:00
env->spr[SPR_PSSCR] |= PSSCR_EC;
/* Set RMLS to the max (ie, 16G) */
lpcr &= ~LPCR_RMLS;
lpcr |= 1ull << LPCR_RMLS_SHIFT;
ppc_store_lpcr(cpu, lpcr);
/* Set a full AMOR so guest can use the AMR as it sees fit */
env->spr[SPR_AMOR] = 0xffffffffffffffffull;
spapr_cpu->vpa_addr = 0;
spapr_cpu->slb_shadow_addr = 0;
spapr_cpu->slb_shadow_size = 0;
spapr_cpu->dtl_addr = 0;
spapr_cpu->dtl_size = 0;
spapr_caps_cpu_apply(spapr, cpu);
2018-04-16 09:19:52 +03:00
kvm_check_mmu(cpu, &error_fatal);
spapr_irq_cpu_intc_reset(spapr, cpu);
}
void spapr_cpu_set_entry_state(PowerPCCPU *cpu, target_ulong nip, target_ulong r3)
{
PowerPCCPUClass *pcc = POWERPC_CPU_GET_CLASS(cpu);
CPUPPCState *env = &cpu->env;
env->nip = nip;
env->gpr[3] = r3;
kvmppc_set_reg_ppc_online(cpu, 1);
CPU(cpu)->halted = 0;
/* Enable Power-saving mode Exit Cause exceptions */
ppc_store_lpcr(cpu, env->spr[SPR_LPCR] | pcc->lpcr_pm);
}
/*
* Return the sPAPR CPU core type for @model which essentially is the CPU
* model specified with -cpu cmdline option.
*/
const char *spapr_get_cpu_core_type(const char *cpu_type)
{
int len = strlen(cpu_type) - strlen(POWERPC_CPU_TYPE_SUFFIX);
char *core_type = g_strdup_printf(SPAPR_CPU_CORE_TYPE_NAME("%.*s"),
len, cpu_type);
ObjectClass *oc = object_class_by_name(core_type);
g_free(core_type);
if (!oc) {
return NULL;
}
return object_class_get_name(oc);
}
spapr_cpu_core: migrate VPA related state QEMU implements the "Shared Processor LPAR" (SPLPAR) option, which allows the hypervisor to time-slice a physical processor into multiple virtual processor. The intent is to allow more guests to run, and to optimize processor utilization. The guest OS can cede idle VCPUs, so that their processing capacity may be used by other VCPUs, with the H_CEDE hcall. The guest OS can also optimize spinlocks, by confering the time-slice of a spinning VCPU to the spinlock holder if it's currently notrunning, with the H_CONFER hcall. Both hcalls depend on a "Virtual Processor Area" (VPA) to be registered by the guest OS, generally during early boot. Other per-VCPU areas can be registered: the "SLB Shadow Buffer" which allows a more efficient dispatching of VCPUs, and the "Dispatch Trace Log Buffer" (DTL) which is used to compute time stolen by the hypervisor. Both DTL and SLB Shadow areas depend on the VPA to be registered. The VPA/SLB Shadow/DTL are state that QEMU should migrate, but this doesn't happen, for no apparent reason other than it was just never coded. This causes the features listed above to stop working after migration, and it breaks the logic of the H_REGISTER_VPA hcall in the destination. The VPA is set at the guest request, ie, we don't have to migrate it before the guest has actually set it. This patch hence adds an "spapr_cpu/vpa" subsection to the recently introduced per-CPU machine data migration stream. Since DTL and SLB Shadow are optional and both depend on VPA, they get their own subsections "spapr_cpu/vpa/slb_shadow" and "spapr_cpu/vpa/dtl" hanging from the "spapr_cpu/vpa" subsection. Note that this won't break migration to older QEMUs. Is is already handled by only registering the vmstate handler for per-CPU data with newer machine types. Signed-off-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-06-18 15:26:49 +03:00
static bool slb_shadow_needed(void *opaque)
{
spapr: Use CamelCase properly The qemu coding standard is to use CamelCase for type and structure names, and the pseries code follows that... sort of. There are quite a lot of places where we bend the rules in order to preserve the capitalization of internal acronyms like "PHB", "TCE", "DIMM" and most commonly "sPAPR". That was a bad idea - it frequently leads to names ending up with hard to read clusters of capital letters, and means they don't catch the eye as type identifiers, which is kind of the point of the CamelCase convention in the first place. In short, keeping type identifiers look like CamelCase is more important than preserving standard capitalization of internal "words". So, this patch renames a heap of spapr internal type names to a more standard CamelCase. In addition to case changes, we also make some other identifier renames: VIOsPAPR* -> SpaprVio* The reverse word ordering was only ever used to mitigate the capital cluster, so revert to the natural ordering. VIOsPAPRVTYDevice -> SpaprVioVty VIOsPAPRVLANDevice -> SpaprVioVlan Brevity, since the "Device" didn't add useful information sPAPRDRConnector -> SpaprDrc sPAPRDRConnectorClass -> SpaprDrcClass Brevity, and makes it clearer this is the same thing as a "DRC" mentioned in many other places in the code This is 100% a mechanical search-and-replace patch. It will, however, conflict with essentially any and all outstanding patches touching the spapr code. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-06 07:35:37 +03:00
SpaprCpuState *spapr_cpu = opaque;
spapr_cpu_core: migrate VPA related state QEMU implements the "Shared Processor LPAR" (SPLPAR) option, which allows the hypervisor to time-slice a physical processor into multiple virtual processor. The intent is to allow more guests to run, and to optimize processor utilization. The guest OS can cede idle VCPUs, so that their processing capacity may be used by other VCPUs, with the H_CEDE hcall. The guest OS can also optimize spinlocks, by confering the time-slice of a spinning VCPU to the spinlock holder if it's currently notrunning, with the H_CONFER hcall. Both hcalls depend on a "Virtual Processor Area" (VPA) to be registered by the guest OS, generally during early boot. Other per-VCPU areas can be registered: the "SLB Shadow Buffer" which allows a more efficient dispatching of VCPUs, and the "Dispatch Trace Log Buffer" (DTL) which is used to compute time stolen by the hypervisor. Both DTL and SLB Shadow areas depend on the VPA to be registered. The VPA/SLB Shadow/DTL are state that QEMU should migrate, but this doesn't happen, for no apparent reason other than it was just never coded. This causes the features listed above to stop working after migration, and it breaks the logic of the H_REGISTER_VPA hcall in the destination. The VPA is set at the guest request, ie, we don't have to migrate it before the guest has actually set it. This patch hence adds an "spapr_cpu/vpa" subsection to the recently introduced per-CPU machine data migration stream. Since DTL and SLB Shadow are optional and both depend on VPA, they get their own subsections "spapr_cpu/vpa/slb_shadow" and "spapr_cpu/vpa/dtl" hanging from the "spapr_cpu/vpa" subsection. Note that this won't break migration to older QEMUs. Is is already handled by only registering the vmstate handler for per-CPU data with newer machine types. Signed-off-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-06-18 15:26:49 +03:00
return spapr_cpu->slb_shadow_addr != 0;
}
static const VMStateDescription vmstate_spapr_cpu_slb_shadow = {
.name = "spapr_cpu/vpa/slb_shadow",
.version_id = 1,
.minimum_version_id = 1,
.needed = slb_shadow_needed,
.fields = (VMStateField[]) {
spapr: Use CamelCase properly The qemu coding standard is to use CamelCase for type and structure names, and the pseries code follows that... sort of. There are quite a lot of places where we bend the rules in order to preserve the capitalization of internal acronyms like "PHB", "TCE", "DIMM" and most commonly "sPAPR". That was a bad idea - it frequently leads to names ending up with hard to read clusters of capital letters, and means they don't catch the eye as type identifiers, which is kind of the point of the CamelCase convention in the first place. In short, keeping type identifiers look like CamelCase is more important than preserving standard capitalization of internal "words". So, this patch renames a heap of spapr internal type names to a more standard CamelCase. In addition to case changes, we also make some other identifier renames: VIOsPAPR* -> SpaprVio* The reverse word ordering was only ever used to mitigate the capital cluster, so revert to the natural ordering. VIOsPAPRVTYDevice -> SpaprVioVty VIOsPAPRVLANDevice -> SpaprVioVlan Brevity, since the "Device" didn't add useful information sPAPRDRConnector -> SpaprDrc sPAPRDRConnectorClass -> SpaprDrcClass Brevity, and makes it clearer this is the same thing as a "DRC" mentioned in many other places in the code This is 100% a mechanical search-and-replace patch. It will, however, conflict with essentially any and all outstanding patches touching the spapr code. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-06 07:35:37 +03:00
VMSTATE_UINT64(slb_shadow_addr, SpaprCpuState),
VMSTATE_UINT64(slb_shadow_size, SpaprCpuState),
spapr_cpu_core: migrate VPA related state QEMU implements the "Shared Processor LPAR" (SPLPAR) option, which allows the hypervisor to time-slice a physical processor into multiple virtual processor. The intent is to allow more guests to run, and to optimize processor utilization. The guest OS can cede idle VCPUs, so that their processing capacity may be used by other VCPUs, with the H_CEDE hcall. The guest OS can also optimize spinlocks, by confering the time-slice of a spinning VCPU to the spinlock holder if it's currently notrunning, with the H_CONFER hcall. Both hcalls depend on a "Virtual Processor Area" (VPA) to be registered by the guest OS, generally during early boot. Other per-VCPU areas can be registered: the "SLB Shadow Buffer" which allows a more efficient dispatching of VCPUs, and the "Dispatch Trace Log Buffer" (DTL) which is used to compute time stolen by the hypervisor. Both DTL and SLB Shadow areas depend on the VPA to be registered. The VPA/SLB Shadow/DTL are state that QEMU should migrate, but this doesn't happen, for no apparent reason other than it was just never coded. This causes the features listed above to stop working after migration, and it breaks the logic of the H_REGISTER_VPA hcall in the destination. The VPA is set at the guest request, ie, we don't have to migrate it before the guest has actually set it. This patch hence adds an "spapr_cpu/vpa" subsection to the recently introduced per-CPU machine data migration stream. Since DTL and SLB Shadow are optional and both depend on VPA, they get their own subsections "spapr_cpu/vpa/slb_shadow" and "spapr_cpu/vpa/dtl" hanging from the "spapr_cpu/vpa" subsection. Note that this won't break migration to older QEMUs. Is is already handled by only registering the vmstate handler for per-CPU data with newer machine types. Signed-off-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-06-18 15:26:49 +03:00
VMSTATE_END_OF_LIST()
}
};
static bool dtl_needed(void *opaque)
{
spapr: Use CamelCase properly The qemu coding standard is to use CamelCase for type and structure names, and the pseries code follows that... sort of. There are quite a lot of places where we bend the rules in order to preserve the capitalization of internal acronyms like "PHB", "TCE", "DIMM" and most commonly "sPAPR". That was a bad idea - it frequently leads to names ending up with hard to read clusters of capital letters, and means they don't catch the eye as type identifiers, which is kind of the point of the CamelCase convention in the first place. In short, keeping type identifiers look like CamelCase is more important than preserving standard capitalization of internal "words". So, this patch renames a heap of spapr internal type names to a more standard CamelCase. In addition to case changes, we also make some other identifier renames: VIOsPAPR* -> SpaprVio* The reverse word ordering was only ever used to mitigate the capital cluster, so revert to the natural ordering. VIOsPAPRVTYDevice -> SpaprVioVty VIOsPAPRVLANDevice -> SpaprVioVlan Brevity, since the "Device" didn't add useful information sPAPRDRConnector -> SpaprDrc sPAPRDRConnectorClass -> SpaprDrcClass Brevity, and makes it clearer this is the same thing as a "DRC" mentioned in many other places in the code This is 100% a mechanical search-and-replace patch. It will, however, conflict with essentially any and all outstanding patches touching the spapr code. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-06 07:35:37 +03:00
SpaprCpuState *spapr_cpu = opaque;
spapr_cpu_core: migrate VPA related state QEMU implements the "Shared Processor LPAR" (SPLPAR) option, which allows the hypervisor to time-slice a physical processor into multiple virtual processor. The intent is to allow more guests to run, and to optimize processor utilization. The guest OS can cede idle VCPUs, so that their processing capacity may be used by other VCPUs, with the H_CEDE hcall. The guest OS can also optimize spinlocks, by confering the time-slice of a spinning VCPU to the spinlock holder if it's currently notrunning, with the H_CONFER hcall. Both hcalls depend on a "Virtual Processor Area" (VPA) to be registered by the guest OS, generally during early boot. Other per-VCPU areas can be registered: the "SLB Shadow Buffer" which allows a more efficient dispatching of VCPUs, and the "Dispatch Trace Log Buffer" (DTL) which is used to compute time stolen by the hypervisor. Both DTL and SLB Shadow areas depend on the VPA to be registered. The VPA/SLB Shadow/DTL are state that QEMU should migrate, but this doesn't happen, for no apparent reason other than it was just never coded. This causes the features listed above to stop working after migration, and it breaks the logic of the H_REGISTER_VPA hcall in the destination. The VPA is set at the guest request, ie, we don't have to migrate it before the guest has actually set it. This patch hence adds an "spapr_cpu/vpa" subsection to the recently introduced per-CPU machine data migration stream. Since DTL and SLB Shadow are optional and both depend on VPA, they get their own subsections "spapr_cpu/vpa/slb_shadow" and "spapr_cpu/vpa/dtl" hanging from the "spapr_cpu/vpa" subsection. Note that this won't break migration to older QEMUs. Is is already handled by only registering the vmstate handler for per-CPU data with newer machine types. Signed-off-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-06-18 15:26:49 +03:00
return spapr_cpu->dtl_addr != 0;
}
static const VMStateDescription vmstate_spapr_cpu_dtl = {
.name = "spapr_cpu/vpa/dtl",
.version_id = 1,
.minimum_version_id = 1,
.needed = dtl_needed,
.fields = (VMStateField[]) {
spapr: Use CamelCase properly The qemu coding standard is to use CamelCase for type and structure names, and the pseries code follows that... sort of. There are quite a lot of places where we bend the rules in order to preserve the capitalization of internal acronyms like "PHB", "TCE", "DIMM" and most commonly "sPAPR". That was a bad idea - it frequently leads to names ending up with hard to read clusters of capital letters, and means they don't catch the eye as type identifiers, which is kind of the point of the CamelCase convention in the first place. In short, keeping type identifiers look like CamelCase is more important than preserving standard capitalization of internal "words". So, this patch renames a heap of spapr internal type names to a more standard CamelCase. In addition to case changes, we also make some other identifier renames: VIOsPAPR* -> SpaprVio* The reverse word ordering was only ever used to mitigate the capital cluster, so revert to the natural ordering. VIOsPAPRVTYDevice -> SpaprVioVty VIOsPAPRVLANDevice -> SpaprVioVlan Brevity, since the "Device" didn't add useful information sPAPRDRConnector -> SpaprDrc sPAPRDRConnectorClass -> SpaprDrcClass Brevity, and makes it clearer this is the same thing as a "DRC" mentioned in many other places in the code This is 100% a mechanical search-and-replace patch. It will, however, conflict with essentially any and all outstanding patches touching the spapr code. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-06 07:35:37 +03:00
VMSTATE_UINT64(dtl_addr, SpaprCpuState),
VMSTATE_UINT64(dtl_size, SpaprCpuState),
spapr_cpu_core: migrate VPA related state QEMU implements the "Shared Processor LPAR" (SPLPAR) option, which allows the hypervisor to time-slice a physical processor into multiple virtual processor. The intent is to allow more guests to run, and to optimize processor utilization. The guest OS can cede idle VCPUs, so that their processing capacity may be used by other VCPUs, with the H_CEDE hcall. The guest OS can also optimize spinlocks, by confering the time-slice of a spinning VCPU to the spinlock holder if it's currently notrunning, with the H_CONFER hcall. Both hcalls depend on a "Virtual Processor Area" (VPA) to be registered by the guest OS, generally during early boot. Other per-VCPU areas can be registered: the "SLB Shadow Buffer" which allows a more efficient dispatching of VCPUs, and the "Dispatch Trace Log Buffer" (DTL) which is used to compute time stolen by the hypervisor. Both DTL and SLB Shadow areas depend on the VPA to be registered. The VPA/SLB Shadow/DTL are state that QEMU should migrate, but this doesn't happen, for no apparent reason other than it was just never coded. This causes the features listed above to stop working after migration, and it breaks the logic of the H_REGISTER_VPA hcall in the destination. The VPA is set at the guest request, ie, we don't have to migrate it before the guest has actually set it. This patch hence adds an "spapr_cpu/vpa" subsection to the recently introduced per-CPU machine data migration stream. Since DTL and SLB Shadow are optional and both depend on VPA, they get their own subsections "spapr_cpu/vpa/slb_shadow" and "spapr_cpu/vpa/dtl" hanging from the "spapr_cpu/vpa" subsection. Note that this won't break migration to older QEMUs. Is is already handled by only registering the vmstate handler for per-CPU data with newer machine types. Signed-off-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-06-18 15:26:49 +03:00
VMSTATE_END_OF_LIST()
}
};
static bool vpa_needed(void *opaque)
{
spapr: Use CamelCase properly The qemu coding standard is to use CamelCase for type and structure names, and the pseries code follows that... sort of. There are quite a lot of places where we bend the rules in order to preserve the capitalization of internal acronyms like "PHB", "TCE", "DIMM" and most commonly "sPAPR". That was a bad idea - it frequently leads to names ending up with hard to read clusters of capital letters, and means they don't catch the eye as type identifiers, which is kind of the point of the CamelCase convention in the first place. In short, keeping type identifiers look like CamelCase is more important than preserving standard capitalization of internal "words". So, this patch renames a heap of spapr internal type names to a more standard CamelCase. In addition to case changes, we also make some other identifier renames: VIOsPAPR* -> SpaprVio* The reverse word ordering was only ever used to mitigate the capital cluster, so revert to the natural ordering. VIOsPAPRVTYDevice -> SpaprVioVty VIOsPAPRVLANDevice -> SpaprVioVlan Brevity, since the "Device" didn't add useful information sPAPRDRConnector -> SpaprDrc sPAPRDRConnectorClass -> SpaprDrcClass Brevity, and makes it clearer this is the same thing as a "DRC" mentioned in many other places in the code This is 100% a mechanical search-and-replace patch. It will, however, conflict with essentially any and all outstanding patches touching the spapr code. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-06 07:35:37 +03:00
SpaprCpuState *spapr_cpu = opaque;
spapr_cpu_core: migrate VPA related state QEMU implements the "Shared Processor LPAR" (SPLPAR) option, which allows the hypervisor to time-slice a physical processor into multiple virtual processor. The intent is to allow more guests to run, and to optimize processor utilization. The guest OS can cede idle VCPUs, so that their processing capacity may be used by other VCPUs, with the H_CEDE hcall. The guest OS can also optimize spinlocks, by confering the time-slice of a spinning VCPU to the spinlock holder if it's currently notrunning, with the H_CONFER hcall. Both hcalls depend on a "Virtual Processor Area" (VPA) to be registered by the guest OS, generally during early boot. Other per-VCPU areas can be registered: the "SLB Shadow Buffer" which allows a more efficient dispatching of VCPUs, and the "Dispatch Trace Log Buffer" (DTL) which is used to compute time stolen by the hypervisor. Both DTL and SLB Shadow areas depend on the VPA to be registered. The VPA/SLB Shadow/DTL are state that QEMU should migrate, but this doesn't happen, for no apparent reason other than it was just never coded. This causes the features listed above to stop working after migration, and it breaks the logic of the H_REGISTER_VPA hcall in the destination. The VPA is set at the guest request, ie, we don't have to migrate it before the guest has actually set it. This patch hence adds an "spapr_cpu/vpa" subsection to the recently introduced per-CPU machine data migration stream. Since DTL and SLB Shadow are optional and both depend on VPA, they get their own subsections "spapr_cpu/vpa/slb_shadow" and "spapr_cpu/vpa/dtl" hanging from the "spapr_cpu/vpa" subsection. Note that this won't break migration to older QEMUs. Is is already handled by only registering the vmstate handler for per-CPU data with newer machine types. Signed-off-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-06-18 15:26:49 +03:00
return spapr_cpu->vpa_addr != 0;
}
static const VMStateDescription vmstate_spapr_cpu_vpa = {
.name = "spapr_cpu/vpa",
.version_id = 1,
.minimum_version_id = 1,
.needed = vpa_needed,
.fields = (VMStateField[]) {
spapr: Use CamelCase properly The qemu coding standard is to use CamelCase for type and structure names, and the pseries code follows that... sort of. There are quite a lot of places where we bend the rules in order to preserve the capitalization of internal acronyms like "PHB", "TCE", "DIMM" and most commonly "sPAPR". That was a bad idea - it frequently leads to names ending up with hard to read clusters of capital letters, and means they don't catch the eye as type identifiers, which is kind of the point of the CamelCase convention in the first place. In short, keeping type identifiers look like CamelCase is more important than preserving standard capitalization of internal "words". So, this patch renames a heap of spapr internal type names to a more standard CamelCase. In addition to case changes, we also make some other identifier renames: VIOsPAPR* -> SpaprVio* The reverse word ordering was only ever used to mitigate the capital cluster, so revert to the natural ordering. VIOsPAPRVTYDevice -> SpaprVioVty VIOsPAPRVLANDevice -> SpaprVioVlan Brevity, since the "Device" didn't add useful information sPAPRDRConnector -> SpaprDrc sPAPRDRConnectorClass -> SpaprDrcClass Brevity, and makes it clearer this is the same thing as a "DRC" mentioned in many other places in the code This is 100% a mechanical search-and-replace patch. It will, however, conflict with essentially any and all outstanding patches touching the spapr code. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-06 07:35:37 +03:00
VMSTATE_UINT64(vpa_addr, SpaprCpuState),
spapr_cpu_core: migrate VPA related state QEMU implements the "Shared Processor LPAR" (SPLPAR) option, which allows the hypervisor to time-slice a physical processor into multiple virtual processor. The intent is to allow more guests to run, and to optimize processor utilization. The guest OS can cede idle VCPUs, so that their processing capacity may be used by other VCPUs, with the H_CEDE hcall. The guest OS can also optimize spinlocks, by confering the time-slice of a spinning VCPU to the spinlock holder if it's currently notrunning, with the H_CONFER hcall. Both hcalls depend on a "Virtual Processor Area" (VPA) to be registered by the guest OS, generally during early boot. Other per-VCPU areas can be registered: the "SLB Shadow Buffer" which allows a more efficient dispatching of VCPUs, and the "Dispatch Trace Log Buffer" (DTL) which is used to compute time stolen by the hypervisor. Both DTL and SLB Shadow areas depend on the VPA to be registered. The VPA/SLB Shadow/DTL are state that QEMU should migrate, but this doesn't happen, for no apparent reason other than it was just never coded. This causes the features listed above to stop working after migration, and it breaks the logic of the H_REGISTER_VPA hcall in the destination. The VPA is set at the guest request, ie, we don't have to migrate it before the guest has actually set it. This patch hence adds an "spapr_cpu/vpa" subsection to the recently introduced per-CPU machine data migration stream. Since DTL and SLB Shadow are optional and both depend on VPA, they get their own subsections "spapr_cpu/vpa/slb_shadow" and "spapr_cpu/vpa/dtl" hanging from the "spapr_cpu/vpa" subsection. Note that this won't break migration to older QEMUs. Is is already handled by only registering the vmstate handler for per-CPU data with newer machine types. Signed-off-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-06-18 15:26:49 +03:00
VMSTATE_END_OF_LIST()
},
.subsections = (const VMStateDescription * []) {
&vmstate_spapr_cpu_slb_shadow,
&vmstate_spapr_cpu_dtl,
NULL
}
};
static const VMStateDescription vmstate_spapr_cpu_state = {
.name = "spapr_cpu",
.version_id = 1,
.minimum_version_id = 1,
.fields = (VMStateField[]) {
VMSTATE_END_OF_LIST()
},
spapr_cpu_core: migrate VPA related state QEMU implements the "Shared Processor LPAR" (SPLPAR) option, which allows the hypervisor to time-slice a physical processor into multiple virtual processor. The intent is to allow more guests to run, and to optimize processor utilization. The guest OS can cede idle VCPUs, so that their processing capacity may be used by other VCPUs, with the H_CEDE hcall. The guest OS can also optimize spinlocks, by confering the time-slice of a spinning VCPU to the spinlock holder if it's currently notrunning, with the H_CONFER hcall. Both hcalls depend on a "Virtual Processor Area" (VPA) to be registered by the guest OS, generally during early boot. Other per-VCPU areas can be registered: the "SLB Shadow Buffer" which allows a more efficient dispatching of VCPUs, and the "Dispatch Trace Log Buffer" (DTL) which is used to compute time stolen by the hypervisor. Both DTL and SLB Shadow areas depend on the VPA to be registered. The VPA/SLB Shadow/DTL are state that QEMU should migrate, but this doesn't happen, for no apparent reason other than it was just never coded. This causes the features listed above to stop working after migration, and it breaks the logic of the H_REGISTER_VPA hcall in the destination. The VPA is set at the guest request, ie, we don't have to migrate it before the guest has actually set it. This patch hence adds an "spapr_cpu/vpa" subsection to the recently introduced per-CPU machine data migration stream. Since DTL and SLB Shadow are optional and both depend on VPA, they get their own subsections "spapr_cpu/vpa/slb_shadow" and "spapr_cpu/vpa/dtl" hanging from the "spapr_cpu/vpa" subsection. Note that this won't break migration to older QEMUs. Is is already handled by only registering the vmstate handler for per-CPU data with newer machine types. Signed-off-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-06-18 15:26:49 +03:00
.subsections = (const VMStateDescription * []) {
&vmstate_spapr_cpu_vpa,
NULL
}
};
spapr: Use CamelCase properly The qemu coding standard is to use CamelCase for type and structure names, and the pseries code follows that... sort of. There are quite a lot of places where we bend the rules in order to preserve the capitalization of internal acronyms like "PHB", "TCE", "DIMM" and most commonly "sPAPR". That was a bad idea - it frequently leads to names ending up with hard to read clusters of capital letters, and means they don't catch the eye as type identifiers, which is kind of the point of the CamelCase convention in the first place. In short, keeping type identifiers look like CamelCase is more important than preserving standard capitalization of internal "words". So, this patch renames a heap of spapr internal type names to a more standard CamelCase. In addition to case changes, we also make some other identifier renames: VIOsPAPR* -> SpaprVio* The reverse word ordering was only ever used to mitigate the capital cluster, so revert to the natural ordering. VIOsPAPRVTYDevice -> SpaprVioVty VIOsPAPRVLANDevice -> SpaprVioVlan Brevity, since the "Device" didn't add useful information sPAPRDRConnector -> SpaprDrc sPAPRDRConnectorClass -> SpaprDrcClass Brevity, and makes it clearer this is the same thing as a "DRC" mentioned in many other places in the code This is 100% a mechanical search-and-replace patch. It will, however, conflict with essentially any and all outstanding patches touching the spapr code. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-06 07:35:37 +03:00
static void spapr_unrealize_vcpu(PowerPCCPU *cpu, SpaprCpuCore *sc)
{
if (!sc->pre_3_0_migration) {
vmstate_unregister(NULL, &vmstate_spapr_cpu_state, cpu->machine_data);
}
spapr_irq_cpu_intc_destroy(SPAPR_MACHINE(qdev_get_machine()), cpu);
cpu_remove_sync(CPU(cpu));
object_unparent(OBJECT(cpu));
}
/*
* Called when CPUs are hot-plugged.
*/
static void spapr_cpu_core_reset(DeviceState *dev)
{
CPUCore *cc = CPU_CORE(dev);
SpaprCpuCore *sc = SPAPR_CPU_CORE(dev);
int i;
for (i = 0; i < cc->nr_threads; i++) {
spapr_reset_vcpu(sc->threads[i]);
}
}
/*
* Called by the machine reset.
*/
static void spapr_cpu_core_reset_handler(void *opaque)
{
spapr_cpu_core_reset(opaque);
}
static void spapr_cpu_core_unrealize(DeviceState *dev, Error **errp)
{
spapr: Use CamelCase properly The qemu coding standard is to use CamelCase for type and structure names, and the pseries code follows that... sort of. There are quite a lot of places where we bend the rules in order to preserve the capitalization of internal acronyms like "PHB", "TCE", "DIMM" and most commonly "sPAPR". That was a bad idea - it frequently leads to names ending up with hard to read clusters of capital letters, and means they don't catch the eye as type identifiers, which is kind of the point of the CamelCase convention in the first place. In short, keeping type identifiers look like CamelCase is more important than preserving standard capitalization of internal "words". So, this patch renames a heap of spapr internal type names to a more standard CamelCase. In addition to case changes, we also make some other identifier renames: VIOsPAPR* -> SpaprVio* The reverse word ordering was only ever used to mitigate the capital cluster, so revert to the natural ordering. VIOsPAPRVTYDevice -> SpaprVioVty VIOsPAPRVLANDevice -> SpaprVioVlan Brevity, since the "Device" didn't add useful information sPAPRDRConnector -> SpaprDrc sPAPRDRConnectorClass -> SpaprDrcClass Brevity, and makes it clearer this is the same thing as a "DRC" mentioned in many other places in the code This is 100% a mechanical search-and-replace patch. It will, however, conflict with essentially any and all outstanding patches touching the spapr code. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-06 07:35:37 +03:00
SpaprCpuCore *sc = SPAPR_CPU_CORE(OBJECT(dev));
CPUCore *cc = CPU_CORE(dev);
int i;
qemu_unregister_reset(spapr_cpu_core_reset_handler, sc);
for (i = 0; i < cc->nr_threads; i++) {
spapr_unrealize_vcpu(sc->threads[i], sc);
}
g_free(sc->threads);
}
spapr: Use CamelCase properly The qemu coding standard is to use CamelCase for type and structure names, and the pseries code follows that... sort of. There are quite a lot of places where we bend the rules in order to preserve the capitalization of internal acronyms like "PHB", "TCE", "DIMM" and most commonly "sPAPR". That was a bad idea - it frequently leads to names ending up with hard to read clusters of capital letters, and means they don't catch the eye as type identifiers, which is kind of the point of the CamelCase convention in the first place. In short, keeping type identifiers look like CamelCase is more important than preserving standard capitalization of internal "words". So, this patch renames a heap of spapr internal type names to a more standard CamelCase. In addition to case changes, we also make some other identifier renames: VIOsPAPR* -> SpaprVio* The reverse word ordering was only ever used to mitigate the capital cluster, so revert to the natural ordering. VIOsPAPRVTYDevice -> SpaprVioVty VIOsPAPRVLANDevice -> SpaprVioVlan Brevity, since the "Device" didn't add useful information sPAPRDRConnector -> SpaprDrc sPAPRDRConnectorClass -> SpaprDrcClass Brevity, and makes it clearer this is the same thing as a "DRC" mentioned in many other places in the code This is 100% a mechanical search-and-replace patch. It will, however, conflict with essentially any and all outstanding patches touching the spapr code. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-06 07:35:37 +03:00
static void spapr_realize_vcpu(PowerPCCPU *cpu, SpaprMachineState *spapr,
SpaprCpuCore *sc, Error **errp)
{
CPUPPCState *env = &cpu->env;
CPUState *cs = CPU(cpu);
Error *local_err = NULL;
object_property_set_bool(OBJECT(cpu), true, "realized", &local_err);
if (local_err) {
goto error;
}
/* Set time-base frequency to 512 MHz */
cpu_ppc_tb_init(env, SPAPR_TIMEBASE_FREQ);
cpu_ppc_set_vhyp(cpu, PPC_VIRTUAL_HYPERVISOR(spapr));
kvmppc_set_papr(cpu);
if (spapr_irq_cpu_intc_create(spapr, cpu, &local_err) < 0) {
goto error_intc_create;
}
if (!sc->pre_3_0_migration) {
vmstate_register(NULL, cs->cpu_index, &vmstate_spapr_cpu_state,
cpu->machine_data);
}
return;
error_intc_create:
spapr_cpu_core: add missing rollback on realization path The spapr_realize_vcpu() function doesn't rollback in case of error. This isn't a problem with coldplugged CPUs because the machine won't start and QEMU will exit. Hotplug is a different story though: the CPU thread is started under object_property_set_bool() and it assumes it can access the CPU object. If icp_create() fails, we return an error without unregistering the reset handler for this CPU, and we let the underlying QEMU thread for this CPU alive. Since spapr_cpu_core_realize() doesn't care to unrealize already realized CPUs either, but happily frees all of them anyway, the CPU thread crashes instantly: (qemu) device_add host-spapr-cpu-core,core-id=1,id=gku GKU: failing icp_create (cpu 0x11497fd0) ^^^^^^^^^^ Program received signal SIGSEGV, Segmentation fault. [Switching to Thread 0x7fffee3feaa0 (LWP 24725)] 0x00000000104c8374 in object_dynamic_cast_assert (obj=0x11497fd0, ^^^^^^^^^^^^^^ pointer to the CPU object 623 trace_object_dynamic_cast_assert(obj ? obj->class->type->name (gdb) p obj->class->type $1 = (Type) 0x0 (gdb) p * obj $2 = {class = 0x10ea9c10, free = 0x11244620, ^^^^^^^^^^ should be g_free (gdb) p g_free $3 = {<text variable, no debug info>} 0x7ffff282bef0 <g_free> obj is a dangling pointer to the CPU that was just destroyed in spapr_cpu_core_realize(). This patch adds proper rollback to both spapr_realize_vcpu() and spapr_cpu_core_realize(). Signed-off-by: Greg Kurz <groug@kaod.org> [dwg: Fixed a conflict due to a change in my tree] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-06-15 00:50:42 +03:00
cpu_remove_sync(CPU(cpu));
error:
error_propagate(errp, local_err);
}
spapr: Use CamelCase properly The qemu coding standard is to use CamelCase for type and structure names, and the pseries code follows that... sort of. There are quite a lot of places where we bend the rules in order to preserve the capitalization of internal acronyms like "PHB", "TCE", "DIMM" and most commonly "sPAPR". That was a bad idea - it frequently leads to names ending up with hard to read clusters of capital letters, and means they don't catch the eye as type identifiers, which is kind of the point of the CamelCase convention in the first place. In short, keeping type identifiers look like CamelCase is more important than preserving standard capitalization of internal "words". So, this patch renames a heap of spapr internal type names to a more standard CamelCase. In addition to case changes, we also make some other identifier renames: VIOsPAPR* -> SpaprVio* The reverse word ordering was only ever used to mitigate the capital cluster, so revert to the natural ordering. VIOsPAPRVTYDevice -> SpaprVioVty VIOsPAPRVLANDevice -> SpaprVioVlan Brevity, since the "Device" didn't add useful information sPAPRDRConnector -> SpaprDrc sPAPRDRConnectorClass -> SpaprDrcClass Brevity, and makes it clearer this is the same thing as a "DRC" mentioned in many other places in the code This is 100% a mechanical search-and-replace patch. It will, however, conflict with essentially any and all outstanding patches touching the spapr code. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-06 07:35:37 +03:00
static PowerPCCPU *spapr_create_vcpu(SpaprCpuCore *sc, int i, Error **errp)
{
spapr: Use CamelCase properly The qemu coding standard is to use CamelCase for type and structure names, and the pseries code follows that... sort of. There are quite a lot of places where we bend the rules in order to preserve the capitalization of internal acronyms like "PHB", "TCE", "DIMM" and most commonly "sPAPR". That was a bad idea - it frequently leads to names ending up with hard to read clusters of capital letters, and means they don't catch the eye as type identifiers, which is kind of the point of the CamelCase convention in the first place. In short, keeping type identifiers look like CamelCase is more important than preserving standard capitalization of internal "words". So, this patch renames a heap of spapr internal type names to a more standard CamelCase. In addition to case changes, we also make some other identifier renames: VIOsPAPR* -> SpaprVio* The reverse word ordering was only ever used to mitigate the capital cluster, so revert to the natural ordering. VIOsPAPRVTYDevice -> SpaprVioVty VIOsPAPRVLANDevice -> SpaprVioVlan Brevity, since the "Device" didn't add useful information sPAPRDRConnector -> SpaprDrc sPAPRDRConnectorClass -> SpaprDrcClass Brevity, and makes it clearer this is the same thing as a "DRC" mentioned in many other places in the code This is 100% a mechanical search-and-replace patch. It will, however, conflict with essentially any and all outstanding patches touching the spapr code. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-06 07:35:37 +03:00
SpaprCpuCoreClass *scc = SPAPR_CPU_CORE_GET_CLASS(sc);
CPUCore *cc = CPU_CORE(sc);
Object *obj;
char *id;
CPUState *cs;
PowerPCCPU *cpu;
Error *local_err = NULL;
obj = object_new(scc->cpu_type);
cs = CPU(obj);
cpu = POWERPC_CPU(obj);
cs->cpu_index = cc->core_id + i;
spapr_set_vcpu_id(cpu, cs->cpu_index, &local_err);
if (local_err) {
goto err;
}
cpu->node_id = sc->node_id;
id = g_strdup_printf("thread[%d]", i);
object_property_add_child(OBJECT(sc), id, obj, &local_err);
g_free(id);
if (local_err) {
goto err;
}
spapr: Use CamelCase properly The qemu coding standard is to use CamelCase for type and structure names, and the pseries code follows that... sort of. There are quite a lot of places where we bend the rules in order to preserve the capitalization of internal acronyms like "PHB", "TCE", "DIMM" and most commonly "sPAPR". That was a bad idea - it frequently leads to names ending up with hard to read clusters of capital letters, and means they don't catch the eye as type identifiers, which is kind of the point of the CamelCase convention in the first place. In short, keeping type identifiers look like CamelCase is more important than preserving standard capitalization of internal "words". So, this patch renames a heap of spapr internal type names to a more standard CamelCase. In addition to case changes, we also make some other identifier renames: VIOsPAPR* -> SpaprVio* The reverse word ordering was only ever used to mitigate the capital cluster, so revert to the natural ordering. VIOsPAPRVTYDevice -> SpaprVioVty VIOsPAPRVLANDevice -> SpaprVioVlan Brevity, since the "Device" didn't add useful information sPAPRDRConnector -> SpaprDrc sPAPRDRConnectorClass -> SpaprDrcClass Brevity, and makes it clearer this is the same thing as a "DRC" mentioned in many other places in the code This is 100% a mechanical search-and-replace patch. It will, however, conflict with essentially any and all outstanding patches touching the spapr code. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-06 07:35:37 +03:00
cpu->machine_data = g_new0(SpaprCpuState, 1);
object_unref(obj);
return cpu;
err:
object_unref(obj);
error_propagate(errp, local_err);
return NULL;
}
spapr: Use CamelCase properly The qemu coding standard is to use CamelCase for type and structure names, and the pseries code follows that... sort of. There are quite a lot of places where we bend the rules in order to preserve the capitalization of internal acronyms like "PHB", "TCE", "DIMM" and most commonly "sPAPR". That was a bad idea - it frequently leads to names ending up with hard to read clusters of capital letters, and means they don't catch the eye as type identifiers, which is kind of the point of the CamelCase convention in the first place. In short, keeping type identifiers look like CamelCase is more important than preserving standard capitalization of internal "words". So, this patch renames a heap of spapr internal type names to a more standard CamelCase. In addition to case changes, we also make some other identifier renames: VIOsPAPR* -> SpaprVio* The reverse word ordering was only ever used to mitigate the capital cluster, so revert to the natural ordering. VIOsPAPRVTYDevice -> SpaprVioVty VIOsPAPRVLANDevice -> SpaprVioVlan Brevity, since the "Device" didn't add useful information sPAPRDRConnector -> SpaprDrc sPAPRDRConnectorClass -> SpaprDrcClass Brevity, and makes it clearer this is the same thing as a "DRC" mentioned in many other places in the code This is 100% a mechanical search-and-replace patch. It will, however, conflict with essentially any and all outstanding patches touching the spapr code. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-06 07:35:37 +03:00
static void spapr_delete_vcpu(PowerPCCPU *cpu, SpaprCpuCore *sc)
{
spapr: Use CamelCase properly The qemu coding standard is to use CamelCase for type and structure names, and the pseries code follows that... sort of. There are quite a lot of places where we bend the rules in order to preserve the capitalization of internal acronyms like "PHB", "TCE", "DIMM" and most commonly "sPAPR". That was a bad idea - it frequently leads to names ending up with hard to read clusters of capital letters, and means they don't catch the eye as type identifiers, which is kind of the point of the CamelCase convention in the first place. In short, keeping type identifiers look like CamelCase is more important than preserving standard capitalization of internal "words". So, this patch renames a heap of spapr internal type names to a more standard CamelCase. In addition to case changes, we also make some other identifier renames: VIOsPAPR* -> SpaprVio* The reverse word ordering was only ever used to mitigate the capital cluster, so revert to the natural ordering. VIOsPAPRVTYDevice -> SpaprVioVty VIOsPAPRVLANDevice -> SpaprVioVlan Brevity, since the "Device" didn't add useful information sPAPRDRConnector -> SpaprDrc sPAPRDRConnectorClass -> SpaprDrcClass Brevity, and makes it clearer this is the same thing as a "DRC" mentioned in many other places in the code This is 100% a mechanical search-and-replace patch. It will, however, conflict with essentially any and all outstanding patches touching the spapr code. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-06 07:35:37 +03:00
SpaprCpuState *spapr_cpu = spapr_cpu_state(cpu);
cpu->machine_data = NULL;
g_free(spapr_cpu);
object_unparent(OBJECT(cpu));
}
static void spapr_cpu_core_realize(DeviceState *dev, Error **errp)
{
/* We don't use SPAPR_MACHINE() in order to exit gracefully if the user
* tries to add a sPAPR CPU core to a non-pseries machine.
*/
spapr: Use CamelCase properly The qemu coding standard is to use CamelCase for type and structure names, and the pseries code follows that... sort of. There are quite a lot of places where we bend the rules in order to preserve the capitalization of internal acronyms like "PHB", "TCE", "DIMM" and most commonly "sPAPR". That was a bad idea - it frequently leads to names ending up with hard to read clusters of capital letters, and means they don't catch the eye as type identifiers, which is kind of the point of the CamelCase convention in the first place. In short, keeping type identifiers look like CamelCase is more important than preserving standard capitalization of internal "words". So, this patch renames a heap of spapr internal type names to a more standard CamelCase. In addition to case changes, we also make some other identifier renames: VIOsPAPR* -> SpaprVio* The reverse word ordering was only ever used to mitigate the capital cluster, so revert to the natural ordering. VIOsPAPRVTYDevice -> SpaprVioVty VIOsPAPRVLANDevice -> SpaprVioVlan Brevity, since the "Device" didn't add useful information sPAPRDRConnector -> SpaprDrc sPAPRDRConnectorClass -> SpaprDrcClass Brevity, and makes it clearer this is the same thing as a "DRC" mentioned in many other places in the code This is 100% a mechanical search-and-replace patch. It will, however, conflict with essentially any and all outstanding patches touching the spapr code. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-06 07:35:37 +03:00
SpaprMachineState *spapr =
(SpaprMachineState *) object_dynamic_cast(qdev_get_machine(),
TYPE_SPAPR_MACHINE);
spapr: Use CamelCase properly The qemu coding standard is to use CamelCase for type and structure names, and the pseries code follows that... sort of. There are quite a lot of places where we bend the rules in order to preserve the capitalization of internal acronyms like "PHB", "TCE", "DIMM" and most commonly "sPAPR". That was a bad idea - it frequently leads to names ending up with hard to read clusters of capital letters, and means they don't catch the eye as type identifiers, which is kind of the point of the CamelCase convention in the first place. In short, keeping type identifiers look like CamelCase is more important than preserving standard capitalization of internal "words". So, this patch renames a heap of spapr internal type names to a more standard CamelCase. In addition to case changes, we also make some other identifier renames: VIOsPAPR* -> SpaprVio* The reverse word ordering was only ever used to mitigate the capital cluster, so revert to the natural ordering. VIOsPAPRVTYDevice -> SpaprVioVty VIOsPAPRVLANDevice -> SpaprVioVlan Brevity, since the "Device" didn't add useful information sPAPRDRConnector -> SpaprDrc sPAPRDRConnectorClass -> SpaprDrcClass Brevity, and makes it clearer this is the same thing as a "DRC" mentioned in many other places in the code This is 100% a mechanical search-and-replace patch. It will, however, conflict with essentially any and all outstanding patches touching the spapr code. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-06 07:35:37 +03:00
SpaprCpuCore *sc = SPAPR_CPU_CORE(OBJECT(dev));
CPUCore *cc = CPU_CORE(OBJECT(dev));
Error *local_err = NULL;
int i, j;
if (!spapr) {
error_setg(errp, TYPE_SPAPR_CPU_CORE " needs a pseries machine");
return;
}
sc->threads = g_new(PowerPCCPU *, cc->nr_threads);
for (i = 0; i < cc->nr_threads; i++) {
sc->threads[i] = spapr_create_vcpu(sc, i, &local_err);
if (local_err) {
goto err;
}
}
for (j = 0; j < cc->nr_threads; j++) {
spapr_realize_vcpu(sc->threads[j], spapr, sc, &local_err);
if (local_err) {
spapr_cpu_core: add missing rollback on realization path The spapr_realize_vcpu() function doesn't rollback in case of error. This isn't a problem with coldplugged CPUs because the machine won't start and QEMU will exit. Hotplug is a different story though: the CPU thread is started under object_property_set_bool() and it assumes it can access the CPU object. If icp_create() fails, we return an error without unregistering the reset handler for this CPU, and we let the underlying QEMU thread for this CPU alive. Since spapr_cpu_core_realize() doesn't care to unrealize already realized CPUs either, but happily frees all of them anyway, the CPU thread crashes instantly: (qemu) device_add host-spapr-cpu-core,core-id=1,id=gku GKU: failing icp_create (cpu 0x11497fd0) ^^^^^^^^^^ Program received signal SIGSEGV, Segmentation fault. [Switching to Thread 0x7fffee3feaa0 (LWP 24725)] 0x00000000104c8374 in object_dynamic_cast_assert (obj=0x11497fd0, ^^^^^^^^^^^^^^ pointer to the CPU object 623 trace_object_dynamic_cast_assert(obj ? obj->class->type->name (gdb) p obj->class->type $1 = (Type) 0x0 (gdb) p * obj $2 = {class = 0x10ea9c10, free = 0x11244620, ^^^^^^^^^^ should be g_free (gdb) p g_free $3 = {<text variable, no debug info>} 0x7ffff282bef0 <g_free> obj is a dangling pointer to the CPU that was just destroyed in spapr_cpu_core_realize(). This patch adds proper rollback to both spapr_realize_vcpu() and spapr_cpu_core_realize(). Signed-off-by: Greg Kurz <groug@kaod.org> [dwg: Fixed a conflict due to a change in my tree] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-06-15 00:50:42 +03:00
goto err_unrealize;
}
}
qemu_register_reset(spapr_cpu_core_reset_handler, sc);
return;
spapr_cpu_core: add missing rollback on realization path The spapr_realize_vcpu() function doesn't rollback in case of error. This isn't a problem with coldplugged CPUs because the machine won't start and QEMU will exit. Hotplug is a different story though: the CPU thread is started under object_property_set_bool() and it assumes it can access the CPU object. If icp_create() fails, we return an error without unregistering the reset handler for this CPU, and we let the underlying QEMU thread for this CPU alive. Since spapr_cpu_core_realize() doesn't care to unrealize already realized CPUs either, but happily frees all of them anyway, the CPU thread crashes instantly: (qemu) device_add host-spapr-cpu-core,core-id=1,id=gku GKU: failing icp_create (cpu 0x11497fd0) ^^^^^^^^^^ Program received signal SIGSEGV, Segmentation fault. [Switching to Thread 0x7fffee3feaa0 (LWP 24725)] 0x00000000104c8374 in object_dynamic_cast_assert (obj=0x11497fd0, ^^^^^^^^^^^^^^ pointer to the CPU object 623 trace_object_dynamic_cast_assert(obj ? obj->class->type->name (gdb) p obj->class->type $1 = (Type) 0x0 (gdb) p * obj $2 = {class = 0x10ea9c10, free = 0x11244620, ^^^^^^^^^^ should be g_free (gdb) p g_free $3 = {<text variable, no debug info>} 0x7ffff282bef0 <g_free> obj is a dangling pointer to the CPU that was just destroyed in spapr_cpu_core_realize(). This patch adds proper rollback to both spapr_realize_vcpu() and spapr_cpu_core_realize(). Signed-off-by: Greg Kurz <groug@kaod.org> [dwg: Fixed a conflict due to a change in my tree] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-06-15 00:50:42 +03:00
err_unrealize:
while (--j >= 0) {
spapr_unrealize_vcpu(sc->threads[j], sc);
spapr_cpu_core: add missing rollback on realization path The spapr_realize_vcpu() function doesn't rollback in case of error. This isn't a problem with coldplugged CPUs because the machine won't start and QEMU will exit. Hotplug is a different story though: the CPU thread is started under object_property_set_bool() and it assumes it can access the CPU object. If icp_create() fails, we return an error without unregistering the reset handler for this CPU, and we let the underlying QEMU thread for this CPU alive. Since spapr_cpu_core_realize() doesn't care to unrealize already realized CPUs either, but happily frees all of them anyway, the CPU thread crashes instantly: (qemu) device_add host-spapr-cpu-core,core-id=1,id=gku GKU: failing icp_create (cpu 0x11497fd0) ^^^^^^^^^^ Program received signal SIGSEGV, Segmentation fault. [Switching to Thread 0x7fffee3feaa0 (LWP 24725)] 0x00000000104c8374 in object_dynamic_cast_assert (obj=0x11497fd0, ^^^^^^^^^^^^^^ pointer to the CPU object 623 trace_object_dynamic_cast_assert(obj ? obj->class->type->name (gdb) p obj->class->type $1 = (Type) 0x0 (gdb) p * obj $2 = {class = 0x10ea9c10, free = 0x11244620, ^^^^^^^^^^ should be g_free (gdb) p g_free $3 = {<text variable, no debug info>} 0x7ffff282bef0 <g_free> obj is a dangling pointer to the CPU that was just destroyed in spapr_cpu_core_realize(). This patch adds proper rollback to both spapr_realize_vcpu() and spapr_cpu_core_realize(). Signed-off-by: Greg Kurz <groug@kaod.org> [dwg: Fixed a conflict due to a change in my tree] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-06-15 00:50:42 +03:00
}
err:
while (--i >= 0) {
spapr_delete_vcpu(sc->threads[i], sc);
}
g_free(sc->threads);
error_propagate(errp, local_err);
}
static Property spapr_cpu_core_properties[] = {
spapr: Use CamelCase properly The qemu coding standard is to use CamelCase for type and structure names, and the pseries code follows that... sort of. There are quite a lot of places where we bend the rules in order to preserve the capitalization of internal acronyms like "PHB", "TCE", "DIMM" and most commonly "sPAPR". That was a bad idea - it frequently leads to names ending up with hard to read clusters of capital letters, and means they don't catch the eye as type identifiers, which is kind of the point of the CamelCase convention in the first place. In short, keeping type identifiers look like CamelCase is more important than preserving standard capitalization of internal "words". So, this patch renames a heap of spapr internal type names to a more standard CamelCase. In addition to case changes, we also make some other identifier renames: VIOsPAPR* -> SpaprVio* The reverse word ordering was only ever used to mitigate the capital cluster, so revert to the natural ordering. VIOsPAPRVTYDevice -> SpaprVioVty VIOsPAPRVLANDevice -> SpaprVioVlan Brevity, since the "Device" didn't add useful information sPAPRDRConnector -> SpaprDrc sPAPRDRConnectorClass -> SpaprDrcClass Brevity, and makes it clearer this is the same thing as a "DRC" mentioned in many other places in the code This is 100% a mechanical search-and-replace patch. It will, however, conflict with essentially any and all outstanding patches touching the spapr code. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-06 07:35:37 +03:00
DEFINE_PROP_INT32("node-id", SpaprCpuCore, node_id, CPU_UNSET_NUMA_NODE_ID),
DEFINE_PROP_BOOL("pre-3.0-migration", SpaprCpuCore, pre_3_0_migration,
false),
DEFINE_PROP_END_OF_LIST()
};
static void spapr_cpu_core_class_init(ObjectClass *oc, void *data)
{
DeviceClass *dc = DEVICE_CLASS(oc);
spapr: Use CamelCase properly The qemu coding standard is to use CamelCase for type and structure names, and the pseries code follows that... sort of. There are quite a lot of places where we bend the rules in order to preserve the capitalization of internal acronyms like "PHB", "TCE", "DIMM" and most commonly "sPAPR". That was a bad idea - it frequently leads to names ending up with hard to read clusters of capital letters, and means they don't catch the eye as type identifiers, which is kind of the point of the CamelCase convention in the first place. In short, keeping type identifiers look like CamelCase is more important than preserving standard capitalization of internal "words". So, this patch renames a heap of spapr internal type names to a more standard CamelCase. In addition to case changes, we also make some other identifier renames: VIOsPAPR* -> SpaprVio* The reverse word ordering was only ever used to mitigate the capital cluster, so revert to the natural ordering. VIOsPAPRVTYDevice -> SpaprVioVty VIOsPAPRVLANDevice -> SpaprVioVlan Brevity, since the "Device" didn't add useful information sPAPRDRConnector -> SpaprDrc sPAPRDRConnectorClass -> SpaprDrcClass Brevity, and makes it clearer this is the same thing as a "DRC" mentioned in many other places in the code This is 100% a mechanical search-and-replace patch. It will, however, conflict with essentially any and all outstanding patches touching the spapr code. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-06 07:35:37 +03:00
SpaprCpuCoreClass *scc = SPAPR_CPU_CORE_CLASS(oc);
dc->realize = spapr_cpu_core_realize;
dc->unrealize = spapr_cpu_core_unrealize;
dc->reset = spapr_cpu_core_reset;
device_class_set_props(dc, spapr_cpu_core_properties);
scc->cpu_type = data;
}
#define DEFINE_SPAPR_CPU_CORE_TYPE(cpu_model) \
{ \
.parent = TYPE_SPAPR_CPU_CORE, \
.class_data = (void *) POWERPC_CPU_TYPE_NAME(cpu_model), \
.class_init = spapr_cpu_core_class_init, \
.name = SPAPR_CPU_CORE_TYPE_NAME(cpu_model), \
}
static const TypeInfo spapr_cpu_core_type_infos[] = {
{
.name = TYPE_SPAPR_CPU_CORE,
.parent = TYPE_CPU_CORE,
.abstract = true,
spapr: Use CamelCase properly The qemu coding standard is to use CamelCase for type and structure names, and the pseries code follows that... sort of. There are quite a lot of places where we bend the rules in order to preserve the capitalization of internal acronyms like "PHB", "TCE", "DIMM" and most commonly "sPAPR". That was a bad idea - it frequently leads to names ending up with hard to read clusters of capital letters, and means they don't catch the eye as type identifiers, which is kind of the point of the CamelCase convention in the first place. In short, keeping type identifiers look like CamelCase is more important than preserving standard capitalization of internal "words". So, this patch renames a heap of spapr internal type names to a more standard CamelCase. In addition to case changes, we also make some other identifier renames: VIOsPAPR* -> SpaprVio* The reverse word ordering was only ever used to mitigate the capital cluster, so revert to the natural ordering. VIOsPAPRVTYDevice -> SpaprVioVty VIOsPAPRVLANDevice -> SpaprVioVlan Brevity, since the "Device" didn't add useful information sPAPRDRConnector -> SpaprDrc sPAPRDRConnectorClass -> SpaprDrcClass Brevity, and makes it clearer this is the same thing as a "DRC" mentioned in many other places in the code This is 100% a mechanical search-and-replace patch. It will, however, conflict with essentially any and all outstanding patches touching the spapr code. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-06 07:35:37 +03:00
.instance_size = sizeof(SpaprCpuCore),
.class_size = sizeof(SpaprCpuCoreClass),
},
DEFINE_SPAPR_CPU_CORE_TYPE("970_v2.2"),
DEFINE_SPAPR_CPU_CORE_TYPE("970mp_v1.0"),
DEFINE_SPAPR_CPU_CORE_TYPE("970mp_v1.1"),
DEFINE_SPAPR_CPU_CORE_TYPE("power5+_v2.1"),
DEFINE_SPAPR_CPU_CORE_TYPE("power7_v2.3"),
DEFINE_SPAPR_CPU_CORE_TYPE("power7+_v2.1"),
DEFINE_SPAPR_CPU_CORE_TYPE("power8_v2.0"),
DEFINE_SPAPR_CPU_CORE_TYPE("power8e_v2.1"),
DEFINE_SPAPR_CPU_CORE_TYPE("power8nvl_v1.0"),
DEFINE_SPAPR_CPU_CORE_TYPE("power9_v1.0"),
DEFINE_SPAPR_CPU_CORE_TYPE("power9_v2.0"),
#ifdef CONFIG_KVM
DEFINE_SPAPR_CPU_CORE_TYPE("host"),
#endif
};
DEFINE_TYPES(spapr_cpu_core_type_infos)