mirrors/qemu
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
d83acfd013
qemu/python/Pipfile.lock

336 lines
16 KiB
Plaintext
Raw Normal View History

python: add pylint to pipenv We are specifying >= pylint 2.8.x for several reasons: 1. For setup.cfg support, added in pylint 2.5.x 2. To specify a version that has incompatibly dropped bad-whitespace checks (2.6.x) 3. 2.7.x fixes "unsubscriptable" warnings in Python 3.9 4. 2.8.x adds a new, incompatible 'consider-using-with' warning that must be disabled in some cases. These pragmas cause warnings themselves in 2.7.x. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Tested-by: Cleber Rosa <crosa@redhat.com> Message-id: 20210527211715.394144-18-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-05-28 00:17:01 +03:00
{
"_meta": {
"hash": {
python: bump avocado to v90.0 Avocado v90 includes improved support for running async unit tests. The workaround that existed prior to v90 causes the unit tests to fail afterwards, however, so upgrade our minimum version pin to the very latest and greatest. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 20210915162955.333025-25-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-09-15 19:29:52 +03:00
"sha256": "784b327272db32403d5a488507853b5afba850ba26a5948e5b6a90c1baef2d9c"
python: add pylint to pipenv We are specifying >= pylint 2.8.x for several reasons: 1. For setup.cfg support, added in pylint 2.5.x 2. To specify a version that has incompatibly dropped bad-whitespace checks (2.6.x) 3. 2.7.x fixes "unsubscriptable" warnings in Python 3.9 4. 2.8.x adds a new, incompatible 'consider-using-with' warning that must be disabled in some cases. These pragmas cause warnings themselves in 2.7.x. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Tested-by: Cleber Rosa <crosa@redhat.com> Message-id: 20210527211715.394144-18-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-05-28 00:17:01 +03:00
},
"pipfile-spec": 6,
"requires": {
"python_version": "3.6"
},
"sources": [
{
"name": "pypi",
"url": "https://pypi.org/simple",
"verify_ssl": true
}
]
},
python/qemu: add qemu package itself to pipenv This adds the python qemu packages themselves to the pipenv manifest. 'pipenv sync' will create a virtual environment sufficient to use the SDK. 'pipenv sync --dev' will create a virtual environment sufficient to use and test the SDK (with pylint, mypy, isort, flake8, etc.) The qemu packages are installed in 'editable' mode; all changes made to the python package inside the git tree will be reflected in the installed package without reinstallation. This includes changes made via git pull and so on. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Tested-by: Cleber Rosa <crosa@redhat.com> Message-id: 20210527211715.394144-26-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-05-28 00:17:09 +03:00
"default": {
"qemu": {
"editable": true,
"path": "."
}
},
python: add pylint to pipenv We are specifying >= pylint 2.8.x for several reasons: 1. For setup.cfg support, added in pylint 2.5.x 2. To specify a version that has incompatibly dropped bad-whitespace checks (2.6.x) 3. 2.7.x fixes "unsubscriptable" warnings in Python 3.9 4. 2.8.x adds a new, incompatible 'consider-using-with' warning that must be disabled in some cases. These pragmas cause warnings themselves in 2.7.x. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Tested-by: Cleber Rosa <crosa@redhat.com> Message-id: 20210527211715.394144-18-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-05-28 00:17:01 +03:00
"develop": {
python/pipenv: Update Pipfile.lock In a previous commit, I added tox to the development requirements of the Python library. I never bothered to add them to the Pipfile, because they aren't needed there. Here, I sync it anyway in its own commit so that when we add new packages later that the diffstats will not confusingly appear to pull in lots of extra packages. Ideally I could tell Pipenv simply not to install these, but it doesn't seem to support that, exactly. The alternative is removing Tox from the development requires, which I'd rather not do. The other alternative is re-specifying all of the dependencies of setup.cfg in the Pipfile, which I'd also rather not do. Picking what feels least-worst here. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 20210603003719.1321369-2-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-03 03:37:01 +03:00
"appdirs": {
"hashes": [
"sha256:7d5d0167b2b1ba821647616af46a749d1c653740dd0d2415100fe26e27afdf41",
"sha256:a841dacd6b99318a741b166adb07e19ee71a274450e68237b4650ca1055ab128"
],
"version": "==1.4.4"
},
python: add pylint to pipenv We are specifying >= pylint 2.8.x for several reasons: 1. For setup.cfg support, added in pylint 2.5.x 2. To specify a version that has incompatibly dropped bad-whitespace checks (2.6.x) 3. 2.7.x fixes "unsubscriptable" warnings in Python 3.9 4. 2.8.x adds a new, incompatible 'consider-using-with' warning that must be disabled in some cases. These pragmas cause warnings themselves in 2.7.x. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Tested-by: Cleber Rosa <crosa@redhat.com> Message-id: 20210527211715.394144-18-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-05-28 00:17:01 +03:00
"astroid": {
"hashes": [
python: Re-lock pipenv at *oldest* supported versions tox is already testing the most recent versions. Let's use pipenv to test the oldest versions we claim to support. This matches the stylistic choice to have pipenv always test our oldest supported Python version, 3.6. The effect of this is that the python-check-pipenv CI job on gitlab will now test against much older versions of these linters, which will help highlight incompatible changes that might otherwise go unnoticed. Update instructions for adding and bumping versions in setup.cfg. The reason for deleting the line that gets added to Pipfile is largely just to avoid having the version minimums specified in multiple places in config checked into the tree. (This patch was written by deleting Pipfile and Pipfile.lock, then explicitly installing each dependency manually at a specific version. Then, I restored the prior Pipfile and re-ran `pipenv lock --dev --keep-outdated` to re-add the qemu dependency back to the pipenv environment while keeping the "old" packages. It's annoying, yes, but I think the improvement to test coverage is worthwhile.) Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Willian Rampazzo <willianr@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Message-id: 20210629214323.1329806-5-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-30 00:43:12 +03:00
"sha256:09bdb456e02564731f8b5957cdd0c98a7f01d2db5e90eb1d794c353c28bfd705",
"sha256:6a8a51f64dae307f6e0c9db752b66a7951e282389d8362cc1d39a56f3feeb31d"
python: add pylint to pipenv We are specifying >= pylint 2.8.x for several reasons: 1. For setup.cfg support, added in pylint 2.5.x 2. To specify a version that has incompatibly dropped bad-whitespace checks (2.6.x) 3. 2.7.x fixes "unsubscriptable" warnings in Python 3.9 4. 2.8.x adds a new, incompatible 'consider-using-with' warning that must be disabled in some cases. These pragmas cause warnings themselves in 2.7.x. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Tested-by: Cleber Rosa <crosa@redhat.com> Message-id: 20210527211715.394144-18-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-05-28 00:17:01 +03:00
],
"markers": "python_version ~= '3.6'",
python: Re-lock pipenv at *oldest* supported versions tox is already testing the most recent versions. Let's use pipenv to test the oldest versions we claim to support. This matches the stylistic choice to have pipenv always test our oldest supported Python version, 3.6. The effect of this is that the python-check-pipenv CI job on gitlab will now test against much older versions of these linters, which will help highlight incompatible changes that might otherwise go unnoticed. Update instructions for adding and bumping versions in setup.cfg. The reason for deleting the line that gets added to Pipfile is largely just to avoid having the version minimums specified in multiple places in config checked into the tree. (This patch was written by deleting Pipfile and Pipfile.lock, then explicitly installing each dependency manually at a specific version. Then, I restored the prior Pipfile and re-ran `pipenv lock --dev --keep-outdated` to re-add the qemu dependency back to the pipenv environment while keeping the "old" packages. It's annoying, yes, but I think the improvement to test coverage is worthwhile.) Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Willian Rampazzo <willianr@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Message-id: 20210629214323.1329806-5-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-30 00:43:12 +03:00
"version": "==2.6.0"
python: add pylint to pipenv We are specifying >= pylint 2.8.x for several reasons: 1. For setup.cfg support, added in pylint 2.5.x 2. To specify a version that has incompatibly dropped bad-whitespace checks (2.6.x) 3. 2.7.x fixes "unsubscriptable" warnings in Python 3.9 4. 2.8.x adds a new, incompatible 'consider-using-with' warning that must be disabled in some cases. These pragmas cause warnings themselves in 2.7.x. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Tested-by: Cleber Rosa <crosa@redhat.com> Message-id: 20210527211715.394144-18-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-05-28 00:17:01 +03:00
},
python: add avocado-framework and tests Try using avocado to manage our various tests; even though right now they're only invoking shell scripts and not really running any python-native code. Create tests/, and add shell scripts which call out to mypy, flake8, pylint and isort to enforce the standards in this directory. Add avocado-framework to the setup.cfg development dependencies, and add avocado.cfg to store some preferences for how we'd like the test output to look. Finally, add avocado-framework to the Pipfile environment and lock the new dependencies. We are using avocado >= 87.0 here to take advantage of some features that Cleber has helpfully added to make the test output here *very* friendly and easy to read for developers that might chance upon the output in Gitlab CI. [Note: ALL of the dependencies get updated to the most modern versions that exist at the time of this writing. No way around it that I have seen. Not ideal, but so it goes.] Provided you have the right development dependencies (mypy, flake8, isort, pylint, and now avocado-framework) You should be able to run "avocado --config avocado.cfg run tests/" from the python folder to run all of these linters with the correct arguments. (A forthcoming commit adds the much easier 'make check'.) Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Tested-by: Cleber Rosa <crosa@redhat.com> Message-id: 20210527211715.394144-28-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-05-28 00:17:11 +03:00
"avocado-framework": {
"hashes": [
python: bump avocado to v90.0 Avocado v90 includes improved support for running async unit tests. The workaround that existed prior to v90 causes the unit tests to fail afterwards, however, so upgrade our minimum version pin to the very latest and greatest. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 20210915162955.333025-25-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-09-15 19:29:52 +03:00
"sha256:244cb569f8eb4e50a22ac82e1a2b2bba2458999f4281efbe2651bd415d59c65b",
"sha256:6f15998b67ecd0e7dde790c4de4dd249d6df52dfe6d5cc4e2dd6596df51c3583"
python: add avocado-framework and tests Try using avocado to manage our various tests; even though right now they're only invoking shell scripts and not really running any python-native code. Create tests/, and add shell scripts which call out to mypy, flake8, pylint and isort to enforce the standards in this directory. Add avocado-framework to the setup.cfg development dependencies, and add avocado.cfg to store some preferences for how we'd like the test output to look. Finally, add avocado-framework to the Pipfile environment and lock the new dependencies. We are using avocado >= 87.0 here to take advantage of some features that Cleber has helpfully added to make the test output here *very* friendly and easy to read for developers that might chance upon the output in Gitlab CI. [Note: ALL of the dependencies get updated to the most modern versions that exist at the time of this writing. No way around it that I have seen. Not ideal, but so it goes.] Provided you have the right development dependencies (mypy, flake8, isort, pylint, and now avocado-framework) You should be able to run "avocado --config avocado.cfg run tests/" from the python folder to run all of these linters with the correct arguments. (A forthcoming commit adds the much easier 'make check'.) Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Tested-by: Cleber Rosa <crosa@redhat.com> Message-id: 20210527211715.394144-28-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-05-28 00:17:11 +03:00
],
python: Re-lock pipenv at *oldest* supported versions tox is already testing the most recent versions. Let's use pipenv to test the oldest versions we claim to support. This matches the stylistic choice to have pipenv always test our oldest supported Python version, 3.6. The effect of this is that the python-check-pipenv CI job on gitlab will now test against much older versions of these linters, which will help highlight incompatible changes that might otherwise go unnoticed. Update instructions for adding and bumping versions in setup.cfg. The reason for deleting the line that gets added to Pipfile is largely just to avoid having the version minimums specified in multiple places in config checked into the tree. (This patch was written by deleting Pipfile and Pipfile.lock, then explicitly installing each dependency manually at a specific version. Then, I restored the prior Pipfile and re-ran `pipenv lock --dev --keep-outdated` to re-add the qemu dependency back to the pipenv environment while keeping the "old" packages. It's annoying, yes, but I think the improvement to test coverage is worthwhile.) Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Willian Rampazzo <willianr@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Message-id: 20210629214323.1329806-5-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-30 00:43:12 +03:00
"index": "pypi",
python: bump avocado to v90.0 Avocado v90 includes improved support for running async unit tests. The workaround that existed prior to v90 causes the unit tests to fail afterwards, however, so upgrade our minimum version pin to the very latest and greatest. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 20210915162955.333025-25-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-09-15 19:29:52 +03:00
"version": "==90.0"
python: add avocado-framework and tests Try using avocado to manage our various tests; even though right now they're only invoking shell scripts and not really running any python-native code. Create tests/, and add shell scripts which call out to mypy, flake8, pylint and isort to enforce the standards in this directory. Add avocado-framework to the setup.cfg development dependencies, and add avocado.cfg to store some preferences for how we'd like the test output to look. Finally, add avocado-framework to the Pipfile environment and lock the new dependencies. We are using avocado >= 87.0 here to take advantage of some features that Cleber has helpfully added to make the test output here *very* friendly and easy to read for developers that might chance upon the output in Gitlab CI. [Note: ALL of the dependencies get updated to the most modern versions that exist at the time of this writing. No way around it that I have seen. Not ideal, but so it goes.] Provided you have the right development dependencies (mypy, flake8, isort, pylint, and now avocado-framework) You should be able to run "avocado --config avocado.cfg run tests/" from the python folder to run all of these linters with the correct arguments. (A forthcoming commit adds the much easier 'make check'.) Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Tested-by: Cleber Rosa <crosa@redhat.com> Message-id: 20210527211715.394144-28-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-05-28 00:17:11 +03:00
},
python/pipenv: Update Pipfile.lock In a previous commit, I added tox to the development requirements of the Python library. I never bothered to add them to the Pipfile, because they aren't needed there. Here, I sync it anyway in its own commit so that when we add new packages later that the diffstats will not confusingly appear to pull in lots of extra packages. Ideally I could tell Pipenv simply not to install these, but it doesn't seem to support that, exactly. The alternative is removing Tox from the development requires, which I'd rather not do. The other alternative is re-specifying all of the dependencies of setup.cfg in the Pipfile, which I'd also rather not do. Picking what feels least-worst here. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 20210603003719.1321369-2-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-03 03:37:01 +03:00
"distlib": {
"hashes": [
"sha256:106fef6dc37dd8c0e2c0a60d3fca3e77460a48907f335fa28420463a6f799736",
"sha256:23e223426b28491b1ced97dc3bbe183027419dfc7982b4fa2f05d5f3ff10711c"
],
"version": "==0.3.2"
},
"filelock": {
"hashes": [
"sha256:18d82244ee114f543149c66a6e0c14e9c4f8a1044b5cdaadd0f82159d6a6ff59",
"sha256:929b7d63ec5b7d6b71b0fa5ac14e030b3f70b75747cef1b10da9b879fef15836"
],
"version": "==3.0.12"
},
python: Add flake8 to pipenv flake8 3.5.x does not support the --extend-ignore syntax used in the .flake8 file to gracefully extend default ignores, so 3.6.x is our minimum requirement. There is no known upper bound. flake8 can be run from the python/ directory with no arguments. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Tested-by: Cleber Rosa <crosa@redhat.com> Message-id: 20210527211715.394144-21-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-05-28 00:17:04 +03:00
"flake8": {
"hashes": [
python: Re-lock pipenv at *oldest* supported versions tox is already testing the most recent versions. Let's use pipenv to test the oldest versions we claim to support. This matches the stylistic choice to have pipenv always test our oldest supported Python version, 3.6. The effect of this is that the python-check-pipenv CI job on gitlab will now test against much older versions of these linters, which will help highlight incompatible changes that might otherwise go unnoticed. Update instructions for adding and bumping versions in setup.cfg. The reason for deleting the line that gets added to Pipfile is largely just to avoid having the version minimums specified in multiple places in config checked into the tree. (This patch was written by deleting Pipfile and Pipfile.lock, then explicitly installing each dependency manually at a specific version. Then, I restored the prior Pipfile and re-ran `pipenv lock --dev --keep-outdated` to re-add the qemu dependency back to the pipenv environment while keeping the "old" packages. It's annoying, yes, but I think the improvement to test coverage is worthwhile.) Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Willian Rampazzo <willianr@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Message-id: 20210629214323.1329806-5-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-30 00:43:12 +03:00
"sha256:6a35f5b8761f45c5513e3405f110a86bea57982c3b75b766ce7b65217abe1670",
"sha256:c01f8a3963b3571a8e6bd7a4063359aff90749e160778e03817cd9b71c9e07d2"
python: Add flake8 to pipenv flake8 3.5.x does not support the --extend-ignore syntax used in the .flake8 file to gracefully extend default ignores, so 3.6.x is our minimum requirement. There is no known upper bound. flake8 can be run from the python/ directory with no arguments. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Tested-by: Cleber Rosa <crosa@redhat.com> Message-id: 20210527211715.394144-21-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-05-28 00:17:04 +03:00
],
python: Re-lock pipenv at *oldest* supported versions tox is already testing the most recent versions. Let's use pipenv to test the oldest versions we claim to support. This matches the stylistic choice to have pipenv always test our oldest supported Python version, 3.6. The effect of this is that the python-check-pipenv CI job on gitlab will now test against much older versions of these linters, which will help highlight incompatible changes that might otherwise go unnoticed. Update instructions for adding and bumping versions in setup.cfg. The reason for deleting the line that gets added to Pipfile is largely just to avoid having the version minimums specified in multiple places in config checked into the tree. (This patch was written by deleting Pipfile and Pipfile.lock, then explicitly installing each dependency manually at a specific version. Then, I restored the prior Pipfile and re-ran `pipenv lock --dev --keep-outdated` to re-add the qemu dependency back to the pipenv environment while keeping the "old" packages. It's annoying, yes, but I think the improvement to test coverage is worthwhile.) Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Willian Rampazzo <willianr@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Message-id: 20210629214323.1329806-5-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-30 00:43:12 +03:00
"index": "pypi",
"version": "==3.6.0"
python: Add flake8 to pipenv flake8 3.5.x does not support the --extend-ignore syntax used in the .flake8 file to gracefully extend default ignores, so 3.6.x is our minimum requirement. There is no known upper bound. flake8 can be run from the python/ directory with no arguments. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Tested-by: Cleber Rosa <crosa@redhat.com> Message-id: 20210527211715.394144-21-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-05-28 00:17:04 +03:00
},
python: add optional FUSE dependencies In preparation for moving qom-fuse over to the python package, we need some new dependencies to support it. Add an optional 'fusepy' dependency that users of the package can opt into with e.g. "pip install qemu[fuse]" which installs the requirements necessary to obtain the additional functionality. Add the same fusepy dependency to the 'devel' extras group -- unfortunately I do not see a way for optional groups to imply other optional groups at present, so the dependency is repeated. The development group needs to include the full set of dependencies for the purpose of static analysis of all features offered by this library. Lastly, add the [fuse] extras group to tox's configuration as a workaround so that if a stale tox environment is found when running `make check-tox`, tox will know to rebuild its environments. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 20210603003719.1321369-17-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-03 03:37:16 +03:00
"fusepy": {
"hashes": [
python: Re-lock pipenv at *oldest* supported versions tox is already testing the most recent versions. Let's use pipenv to test the oldest versions we claim to support. This matches the stylistic choice to have pipenv always test our oldest supported Python version, 3.6. The effect of this is that the python-check-pipenv CI job on gitlab will now test against much older versions of these linters, which will help highlight incompatible changes that might otherwise go unnoticed. Update instructions for adding and bumping versions in setup.cfg. The reason for deleting the line that gets added to Pipfile is largely just to avoid having the version minimums specified in multiple places in config checked into the tree. (This patch was written by deleting Pipfile and Pipfile.lock, then explicitly installing each dependency manually at a specific version. Then, I restored the prior Pipfile and re-ran `pipenv lock --dev --keep-outdated` to re-add the qemu dependency back to the pipenv environment while keeping the "old" packages. It's annoying, yes, but I think the improvement to test coverage is worthwhile.) Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Willian Rampazzo <willianr@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Message-id: 20210629214323.1329806-5-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-30 00:43:12 +03:00
"sha256:10f5c7f5414241bffecdc333c4d3a725f1d6605cae6b4eaf86a838ff49cdaf6c",
"sha256:a9f3a3699080ddcf0919fd1eb2cf743e1f5859ca54c2018632f939bdfac269ee"
python: add optional FUSE dependencies In preparation for moving qom-fuse over to the python package, we need some new dependencies to support it. Add an optional 'fusepy' dependency that users of the package can opt into with e.g. "pip install qemu[fuse]" which installs the requirements necessary to obtain the additional functionality. Add the same fusepy dependency to the 'devel' extras group -- unfortunately I do not see a way for optional groups to imply other optional groups at present, so the dependency is repeated. The development group needs to include the full set of dependencies for the purpose of static analysis of all features offered by this library. Lastly, add the [fuse] extras group to tox's configuration as a workaround so that if a stale tox environment is found when running `make check-tox`, tox will know to rebuild its environments. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 20210603003719.1321369-17-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-03 03:37:16 +03:00
],
python: Re-lock pipenv at *oldest* supported versions tox is already testing the most recent versions. Let's use pipenv to test the oldest versions we claim to support. This matches the stylistic choice to have pipenv always test our oldest supported Python version, 3.6. The effect of this is that the python-check-pipenv CI job on gitlab will now test against much older versions of these linters, which will help highlight incompatible changes that might otherwise go unnoticed. Update instructions for adding and bumping versions in setup.cfg. The reason for deleting the line that gets added to Pipfile is largely just to avoid having the version minimums specified in multiple places in config checked into the tree. (This patch was written by deleting Pipfile and Pipfile.lock, then explicitly installing each dependency manually at a specific version. Then, I restored the prior Pipfile and re-ran `pipenv lock --dev --keep-outdated` to re-add the qemu dependency back to the pipenv environment while keeping the "old" packages. It's annoying, yes, but I think the improvement to test coverage is worthwhile.) Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Willian Rampazzo <willianr@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Message-id: 20210629214323.1329806-5-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-30 00:43:12 +03:00
"index": "pypi",
"version": "==2.0.4"
python: add optional FUSE dependencies In preparation for moving qom-fuse over to the python package, we need some new dependencies to support it. Add an optional 'fusepy' dependency that users of the package can opt into with e.g. "pip install qemu[fuse]" which installs the requirements necessary to obtain the additional functionality. Add the same fusepy dependency to the 'devel' extras group -- unfortunately I do not see a way for optional groups to imply other optional groups at present, so the dependency is repeated. The development group needs to include the full set of dependencies for the purpose of static analysis of all features offered by this library. Lastly, add the [fuse] extras group to tox's configuration as a workaround so that if a stale tox environment is found when running `make check-tox`, tox will know to rebuild its environments. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 20210603003719.1321369-17-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-03 03:37:16 +03:00
},
python: Add flake8 to pipenv flake8 3.5.x does not support the --extend-ignore syntax used in the .flake8 file to gracefully extend default ignores, so 3.6.x is our minimum requirement. There is no known upper bound. flake8 can be run from the python/ directory with no arguments. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Tested-by: Cleber Rosa <crosa@redhat.com> Message-id: 20210527211715.394144-21-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-05-28 00:17:04 +03:00
"importlib-metadata": {
"hashes": [
python: Re-lock pipenv at *oldest* supported versions tox is already testing the most recent versions. Let's use pipenv to test the oldest versions we claim to support. This matches the stylistic choice to have pipenv always test our oldest supported Python version, 3.6. The effect of this is that the python-check-pipenv CI job on gitlab will now test against much older versions of these linters, which will help highlight incompatible changes that might otherwise go unnoticed. Update instructions for adding and bumping versions in setup.cfg. The reason for deleting the line that gets added to Pipfile is largely just to avoid having the version minimums specified in multiple places in config checked into the tree. (This patch was written by deleting Pipfile and Pipfile.lock, then explicitly installing each dependency manually at a specific version. Then, I restored the prior Pipfile and re-ran `pipenv lock --dev --keep-outdated` to re-add the qemu dependency back to the pipenv environment while keeping the "old" packages. It's annoying, yes, but I think the improvement to test coverage is worthwhile.) Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Willian Rampazzo <willianr@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Message-id: 20210629214323.1329806-5-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-30 00:43:12 +03:00
"sha256:90bb658cdbbf6d1735b6341ce708fc7024a3e14e99ffdc5783edea9f9b077f83",
"sha256:dc15b2969b4ce36305c51eebe62d418ac7791e9a157911d58bfb1f9ccd8e2070"
python: Add flake8 to pipenv flake8 3.5.x does not support the --extend-ignore syntax used in the .flake8 file to gracefully extend default ignores, so 3.6.x is our minimum requirement. There is no known upper bound. flake8 can be run from the python/ directory with no arguments. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Tested-by: Cleber Rosa <crosa@redhat.com> Message-id: 20210527211715.394144-21-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-05-28 00:17:04 +03:00
],
"markers": "python_version < '3.8'",
python: Re-lock pipenv at *oldest* supported versions tox is already testing the most recent versions. Let's use pipenv to test the oldest versions we claim to support. This matches the stylistic choice to have pipenv always test our oldest supported Python version, 3.6. The effect of this is that the python-check-pipenv CI job on gitlab will now test against much older versions of these linters, which will help highlight incompatible changes that might otherwise go unnoticed. Update instructions for adding and bumping versions in setup.cfg. The reason for deleting the line that gets added to Pipfile is largely just to avoid having the version minimums specified in multiple places in config checked into the tree. (This patch was written by deleting Pipfile and Pipfile.lock, then explicitly installing each dependency manually at a specific version. Then, I restored the prior Pipfile and re-ran `pipenv lock --dev --keep-outdated` to re-add the qemu dependency back to the pipenv environment while keeping the "old" packages. It's annoying, yes, but I think the improvement to test coverage is worthwhile.) Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Willian Rampazzo <willianr@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Message-id: 20210629214323.1329806-5-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-30 00:43:12 +03:00
"version": "==1.7.0"
python: Add flake8 to pipenv flake8 3.5.x does not support the --extend-ignore syntax used in the .flake8 file to gracefully extend default ignores, so 3.6.x is our minimum requirement. There is no known upper bound. flake8 can be run from the python/ directory with no arguments. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Tested-by: Cleber Rosa <crosa@redhat.com> Message-id: 20210527211715.394144-21-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-05-28 00:17:04 +03:00
},
python/pipenv: Update Pipfile.lock In a previous commit, I added tox to the development requirements of the Python library. I never bothered to add them to the Pipfile, because they aren't needed there. Here, I sync it anyway in its own commit so that when we add new packages later that the diffstats will not confusingly appear to pull in lots of extra packages. Ideally I could tell Pipenv simply not to install these, but it doesn't seem to support that, exactly. The alternative is removing Tox from the development requires, which I'd rather not do. The other alternative is re-specifying all of the dependencies of setup.cfg in the Pipfile, which I'd also rather not do. Picking what feels least-worst here. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 20210603003719.1321369-2-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-03 03:37:01 +03:00
"importlib-resources": {
"hashes": [
"sha256:54161657e8ffc76596c4ede7080ca68cb02962a2e074a2586b695a93a925d36e",
"sha256:e962bff7440364183203d179d7ae9ad90cb1f2b74dcb84300e88ecc42dca3351"
],
"markers": "python_version < '3.7'",
"version": "==5.1.4"
},
python: add pylint to pipenv We are specifying >= pylint 2.8.x for several reasons: 1. For setup.cfg support, added in pylint 2.5.x 2. To specify a version that has incompatibly dropped bad-whitespace checks (2.6.x) 3. 2.7.x fixes "unsubscriptable" warnings in Python 3.9 4. 2.8.x adds a new, incompatible 'consider-using-with' warning that must be disabled in some cases. These pragmas cause warnings themselves in 2.7.x. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Tested-by: Cleber Rosa <crosa@redhat.com> Message-id: 20210527211715.394144-18-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-05-28 00:17:01 +03:00
"isort": {
"hashes": [
python: Re-lock pipenv at *oldest* supported versions tox is already testing the most recent versions. Let's use pipenv to test the oldest versions we claim to support. This matches the stylistic choice to have pipenv always test our oldest supported Python version, 3.6. The effect of this is that the python-check-pipenv CI job on gitlab will now test against much older versions of these linters, which will help highlight incompatible changes that might otherwise go unnoticed. Update instructions for adding and bumping versions in setup.cfg. The reason for deleting the line that gets added to Pipfile is largely just to avoid having the version minimums specified in multiple places in config checked into the tree. (This patch was written by deleting Pipfile and Pipfile.lock, then explicitly installing each dependency manually at a specific version. Then, I restored the prior Pipfile and re-ran `pipenv lock --dev --keep-outdated` to re-add the qemu dependency back to the pipenv environment while keeping the "old" packages. It's annoying, yes, but I think the improvement to test coverage is worthwhile.) Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Willian Rampazzo <willianr@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Message-id: 20210629214323.1329806-5-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-30 00:43:12 +03:00
"sha256:408e4d75d84f51b64d0824894afee44469eba34a4caee621dc53799f80d71ccc",
"sha256:64022dea6a06badfa09b300b4dfe8ba968114a737919e8ed50aea1c288f078aa"
python: add pylint to pipenv We are specifying >= pylint 2.8.x for several reasons: 1. For setup.cfg support, added in pylint 2.5.x 2. To specify a version that has incompatibly dropped bad-whitespace checks (2.6.x) 3. 2.7.x fixes "unsubscriptable" warnings in Python 3.9 4. 2.8.x adds a new, incompatible 'consider-using-with' warning that must be disabled in some cases. These pragmas cause warnings themselves in 2.7.x. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Tested-by: Cleber Rosa <crosa@redhat.com> Message-id: 20210527211715.394144-18-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-05-28 00:17:01 +03:00
],
python: Re-lock pipenv at *oldest* supported versions tox is already testing the most recent versions. Let's use pipenv to test the oldest versions we claim to support. This matches the stylistic choice to have pipenv always test our oldest supported Python version, 3.6. The effect of this is that the python-check-pipenv CI job on gitlab will now test against much older versions of these linters, which will help highlight incompatible changes that might otherwise go unnoticed. Update instructions for adding and bumping versions in setup.cfg. The reason for deleting the line that gets added to Pipfile is largely just to avoid having the version minimums specified in multiple places in config checked into the tree. (This patch was written by deleting Pipfile and Pipfile.lock, then explicitly installing each dependency manually at a specific version. Then, I restored the prior Pipfile and re-ran `pipenv lock --dev --keep-outdated` to re-add the qemu dependency back to the pipenv environment while keeping the "old" packages. It's annoying, yes, but I think the improvement to test coverage is worthwhile.) Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Willian Rampazzo <willianr@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Message-id: 20210629214323.1329806-5-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-30 00:43:12 +03:00
"index": "pypi",
"version": "==5.1.2"
python: add pylint to pipenv We are specifying >= pylint 2.8.x for several reasons: 1. For setup.cfg support, added in pylint 2.5.x 2. To specify a version that has incompatibly dropped bad-whitespace checks (2.6.x) 3. 2.7.x fixes "unsubscriptable" warnings in Python 3.9 4. 2.8.x adds a new, incompatible 'consider-using-with' warning that must be disabled in some cases. These pragmas cause warnings themselves in 2.7.x. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Tested-by: Cleber Rosa <crosa@redhat.com> Message-id: 20210527211715.394144-18-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-05-28 00:17:01 +03:00
},
"lazy-object-proxy": {
"hashes": [
"sha256:17e0967ba374fc24141738c69736da90e94419338fd4c7c7bef01ee26b339653",
"sha256:1fee665d2638491f4d6e55bd483e15ef21f6c8c2095f235fef72601021e64f61",
"sha256:22ddd618cefe54305df49e4c069fa65715be4ad0e78e8d252a33debf00f6ede2",
"sha256:24a5045889cc2729033b3e604d496c2b6f588c754f7a62027ad4437a7ecc4837",
"sha256:410283732af311b51b837894fa2f24f2c0039aa7f220135192b38fcc42bd43d3",
"sha256:4732c765372bd78a2d6b2150a6e99d00a78ec963375f236979c0626b97ed8e43",
"sha256:489000d368377571c6f982fba6497f2aa13c6d1facc40660963da62f5c379726",
"sha256:4f60460e9f1eb632584c9685bccea152f4ac2130e299784dbaf9fae9f49891b3",
"sha256:5743a5ab42ae40caa8421b320ebf3a998f89c85cdc8376d6b2e00bd12bd1b587",
"sha256:85fb7608121fd5621cc4377a8961d0b32ccf84a7285b4f1d21988b2eae2868e8",
"sha256:9698110e36e2df951c7c36b6729e96429c9c32b3331989ef19976592c5f3c77a",
"sha256:9d397bf41caad3f489e10774667310d73cb9c4258e9aed94b9ec734b34b495fd",
"sha256:b579f8acbf2bdd9ea200b1d5dea36abd93cabf56cf626ab9c744a432e15c815f",
"sha256:b865b01a2e7f96db0c5d12cfea590f98d8c5ba64ad222300d93ce6ff9138bcad",
"sha256:bf34e368e8dd976423396555078def5cfc3039ebc6fc06d1ae2c5a65eebbcde4",
"sha256:c6938967f8528b3668622a9ed3b31d145fab161a32f5891ea7b84f6b790be05b",
"sha256:d1c2676e3d840852a2de7c7d5d76407c772927addff8d742b9808fe0afccebdf",
"sha256:d7124f52f3bd259f510651450e18e0fd081ed82f3c08541dffc7b94b883aa981",
"sha256:d900d949b707778696fdf01036f58c9876a0d8bfe116e8d220cfd4b15f14e741",
"sha256:ebfd274dcd5133e0afae738e6d9da4323c3eb021b3e13052d8cbd0e457b1256e",
"sha256:ed361bb83436f117f9917d282a456f9e5009ea12fd6de8742d1a4752c3017e93",
"sha256:f5144c75445ae3ca2057faac03fda5a902eff196702b0a24daf1d6ce0650514b"
],
"markers": "python_version >= '2.7' and python_version not in '3.0, 3.1, 3.2, 3.3, 3.4, 3.5'",
"version": "==1.6.0"
},
"mccabe": {
"hashes": [
"sha256:ab8a6258860da4b6677da4bd2fe5dc2c659cff31b3ee4f7f5d64e79735b80d42",
"sha256:dd8d182285a0fe56bace7f45b5e7d1a6ebcbf524e8f3bd87eb0f125271b8831f"
],
"version": "==0.6.1"
},
python: add mypy to pipenv 0.730 appears to be about the oldest version that works with the features we want, including nice human readable output (to make sure iotest 297 passes), and type-parameterized Popen generics. 0.770, however, supports adding 'strict' to the config file, so require at least 0.770. Now that we are checking a namespace package, we need to tell mypy to allow PEP420 namespaces, so modify the mypy config as part of the move. mypy can now be run from the python root by typing 'mypy -p qemu'. A note on mypy invocation: Running it as "mypy qemu/" changes the import path detection mechanisms in mypy slightly, and it will fail. See https://github.com/python/mypy/issues/8584 for a decent entry point with more breadcrumbs on the various behaviors that contribute to this subtle difference. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Tested-by: Cleber Rosa <crosa@redhat.com> Message-id: 20210527211715.394144-23-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-05-28 00:17:06 +03:00
"mypy": {
"hashes": [
python: Re-lock pipenv at *oldest* supported versions tox is already testing the most recent versions. Let's use pipenv to test the oldest versions we claim to support. This matches the stylistic choice to have pipenv always test our oldest supported Python version, 3.6. The effect of this is that the python-check-pipenv CI job on gitlab will now test against much older versions of these linters, which will help highlight incompatible changes that might otherwise go unnoticed. Update instructions for adding and bumping versions in setup.cfg. The reason for deleting the line that gets added to Pipfile is largely just to avoid having the version minimums specified in multiple places in config checked into the tree. (This patch was written by deleting Pipfile and Pipfile.lock, then explicitly installing each dependency manually at a specific version. Then, I restored the prior Pipfile and re-ran `pipenv lock --dev --keep-outdated` to re-add the qemu dependency back to the pipenv environment while keeping the "old" packages. It's annoying, yes, but I think the improvement to test coverage is worthwhile.) Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Willian Rampazzo <willianr@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Message-id: 20210629214323.1329806-5-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-30 00:43:12 +03:00
"sha256:15b948e1302682e3682f11f50208b726a246ab4e6c1b39f9264a8796bb416aa2",
"sha256:219a3116ecd015f8dca7b5d2c366c973509dfb9a8fc97ef044a36e3da66144a1",
"sha256:3b1fc683fb204c6b4403a1ef23f0b1fac8e4477091585e0c8c54cbdf7d7bb164",
"sha256:3beff56b453b6ef94ecb2996bea101a08f1f8a9771d3cbf4988a61e4d9973761",
"sha256:7687f6455ec3ed7649d1ae574136835a4272b65b3ddcf01ab8704ac65616c5ce",
"sha256:7ec45a70d40ede1ec7ad7f95b3c94c9cf4c186a32f6bacb1795b60abd2f9ef27",
"sha256:86c857510a9b7c3104cf4cde1568f4921762c8f9842e987bc03ed4f160925754",
"sha256:8a627507ef9b307b46a1fea9513d5c98680ba09591253082b4c48697ba05a4ae",
"sha256:8dfb69fbf9f3aeed18afffb15e319ca7f8da9642336348ddd6cab2713ddcf8f9",
"sha256:a34b577cdf6313bf24755f7a0e3f3c326d5c1f4fe7422d1d06498eb25ad0c600",
"sha256:a8ffcd53cb5dfc131850851cc09f1c44689c2812d0beb954d8138d4f5fc17f65",
"sha256:b90928f2d9eb2f33162405f32dde9f6dcead63a0971ca8a1b50eb4ca3e35ceb8",
"sha256:c56ffe22faa2e51054c5f7a3bc70a370939c2ed4de308c690e7949230c995913",
"sha256:f91c7ae919bbc3f96cd5e5b2e786b2b108343d1d7972ea130f7de27fdd547cf3"
],
"index": "pypi",
"version": "==0.770"
python: add mypy to pipenv 0.730 appears to be about the oldest version that works with the features we want, including nice human readable output (to make sure iotest 297 passes), and type-parameterized Popen generics. 0.770, however, supports adding 'strict' to the config file, so require at least 0.770. Now that we are checking a namespace package, we need to tell mypy to allow PEP420 namespaces, so modify the mypy config as part of the move. mypy can now be run from the python root by typing 'mypy -p qemu'. A note on mypy invocation: Running it as "mypy qemu/" changes the import path detection mechanisms in mypy slightly, and it will fail. See https://github.com/python/mypy/issues/8584 for a decent entry point with more breadcrumbs on the various behaviors that contribute to this subtle difference. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Tested-by: Cleber Rosa <crosa@redhat.com> Message-id: 20210527211715.394144-23-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-05-28 00:17:06 +03:00
},
"mypy-extensions": {
"hashes": [
"sha256:090fedd75945a69ae91ce1303b5824f428daf5a028d2f6ab8a299250a846f15d",
"sha256:2d82818f5bb3e369420cb3c4060a7970edba416647068eb4c5343488a6c604a8"
],
"version": "==0.4.3"
},
python/pipenv: Update Pipfile.lock In a previous commit, I added tox to the development requirements of the Python library. I never bothered to add them to the Pipfile, because they aren't needed there. Here, I sync it anyway in its own commit so that when we add new packages later that the diffstats will not confusingly appear to pull in lots of extra packages. Ideally I could tell Pipenv simply not to install these, but it doesn't seem to support that, exactly. The alternative is removing Tox from the development requires, which I'd rather not do. The other alternative is re-specifying all of the dependencies of setup.cfg in the Pipfile, which I'd also rather not do. Picking what feels least-worst here. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 20210603003719.1321369-2-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-03 03:37:01 +03:00
"packaging": {
"hashes": [
"sha256:5b327ac1320dc863dca72f4514ecc086f31186744b84a230374cc1fd776feae5",
"sha256:67714da7f7bc052e064859c05c595155bd1ee9f69f76557e21f051443c20947a"
],
"markers": "python_version >= '2.7' and python_version not in '3.0, 3.1, 3.2, 3.3'",
"version": "==20.9"
},
"pluggy": {
"hashes": [
"sha256:15b2acde666561e1298d71b523007ed7364de07029219b604cf808bfa1c765b0",
"sha256:966c145cd83c96502c3c3868f50408687b38434af77734af1e9ca461a4081d2d"
],
"markers": "python_version >= '2.7' and python_version not in '3.0, 3.1, 3.2, 3.3'",
"version": "==0.13.1"
},
"py": {
"hashes": [
"sha256:21b81bda15b66ef5e1a777a21c4dcd9c20ad3efd0b3f817e7a809035269e1bd3",
"sha256:3b80836aa6d1feeaa108e046da6423ab8f6ceda6468545ae8d02d9d58d18818a"
],
"markers": "python_version >= '2.7' and python_version not in '3.0, 3.1, 3.2, 3.3'",
"version": "==1.10.0"
},
python: Add flake8 to pipenv flake8 3.5.x does not support the --extend-ignore syntax used in the .flake8 file to gracefully extend default ignores, so 3.6.x is our minimum requirement. There is no known upper bound. flake8 can be run from the python/ directory with no arguments. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Tested-by: Cleber Rosa <crosa@redhat.com> Message-id: 20210527211715.394144-21-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-05-28 00:17:04 +03:00
"pycodestyle": {
"hashes": [
python: Re-lock pipenv at *oldest* supported versions tox is already testing the most recent versions. Let's use pipenv to test the oldest versions we claim to support. This matches the stylistic choice to have pipenv always test our oldest supported Python version, 3.6. The effect of this is that the python-check-pipenv CI job on gitlab will now test against much older versions of these linters, which will help highlight incompatible changes that might otherwise go unnoticed. Update instructions for adding and bumping versions in setup.cfg. The reason for deleting the line that gets added to Pipfile is largely just to avoid having the version minimums specified in multiple places in config checked into the tree. (This patch was written by deleting Pipfile and Pipfile.lock, then explicitly installing each dependency manually at a specific version. Then, I restored the prior Pipfile and re-ran `pipenv lock --dev --keep-outdated` to re-add the qemu dependency back to the pipenv environment while keeping the "old" packages. It's annoying, yes, but I think the improvement to test coverage is worthwhile.) Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Willian Rampazzo <willianr@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Message-id: 20210629214323.1329806-5-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-30 00:43:12 +03:00
"sha256:74abc4e221d393ea5ce1f129ea6903209940c1ecd29e002e8c6933c2b21026e0",
"sha256:cbc619d09254895b0d12c2c691e237b2e91e9b2ecf5e84c26b35400f93dcfb83",
"sha256:cbfca99bd594a10f674d0cd97a3d802a1fdef635d4361e1a2658de47ed261e3a"
python: Add flake8 to pipenv flake8 3.5.x does not support the --extend-ignore syntax used in the .flake8 file to gracefully extend default ignores, so 3.6.x is our minimum requirement. There is no known upper bound. flake8 can be run from the python/ directory with no arguments. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Tested-by: Cleber Rosa <crosa@redhat.com> Message-id: 20210527211715.394144-21-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-05-28 00:17:04 +03:00
],
python: Re-lock pipenv at *oldest* supported versions tox is already testing the most recent versions. Let's use pipenv to test the oldest versions we claim to support. This matches the stylistic choice to have pipenv always test our oldest supported Python version, 3.6. The effect of this is that the python-check-pipenv CI job on gitlab will now test against much older versions of these linters, which will help highlight incompatible changes that might otherwise go unnoticed. Update instructions for adding and bumping versions in setup.cfg. The reason for deleting the line that gets added to Pipfile is largely just to avoid having the version minimums specified in multiple places in config checked into the tree. (This patch was written by deleting Pipfile and Pipfile.lock, then explicitly installing each dependency manually at a specific version. Then, I restored the prior Pipfile and re-ran `pipenv lock --dev --keep-outdated` to re-add the qemu dependency back to the pipenv environment while keeping the "old" packages. It's annoying, yes, but I think the improvement to test coverage is worthwhile.) Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Willian Rampazzo <willianr@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Message-id: 20210629214323.1329806-5-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-30 00:43:12 +03:00
"version": "==2.4.0"
python: Add flake8 to pipenv flake8 3.5.x does not support the --extend-ignore syntax used in the .flake8 file to gracefully extend default ignores, so 3.6.x is our minimum requirement. There is no known upper bound. flake8 can be run from the python/ directory with no arguments. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Tested-by: Cleber Rosa <crosa@redhat.com> Message-id: 20210527211715.394144-21-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-05-28 00:17:04 +03:00
},
"pyflakes": {
"hashes": [
python: Re-lock pipenv at *oldest* supported versions tox is already testing the most recent versions. Let's use pipenv to test the oldest versions we claim to support. This matches the stylistic choice to have pipenv always test our oldest supported Python version, 3.6. The effect of this is that the python-check-pipenv CI job on gitlab will now test against much older versions of these linters, which will help highlight incompatible changes that might otherwise go unnoticed. Update instructions for adding and bumping versions in setup.cfg. The reason for deleting the line that gets added to Pipfile is largely just to avoid having the version minimums specified in multiple places in config checked into the tree. (This patch was written by deleting Pipfile and Pipfile.lock, then explicitly installing each dependency manually at a specific version. Then, I restored the prior Pipfile and re-ran `pipenv lock --dev --keep-outdated` to re-add the qemu dependency back to the pipenv environment while keeping the "old" packages. It's annoying, yes, but I think the improvement to test coverage is worthwhile.) Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Willian Rampazzo <willianr@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Message-id: 20210629214323.1329806-5-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-30 00:43:12 +03:00
"sha256:9a7662ec724d0120012f6e29d6248ae3727d821bba522a0e6b356eff19126a49",
"sha256:f661252913bc1dbe7fcfcbf0af0db3f42ab65aabd1a6ca68fe5d466bace94dae"
python: Add flake8 to pipenv flake8 3.5.x does not support the --extend-ignore syntax used in the .flake8 file to gracefully extend default ignores, so 3.6.x is our minimum requirement. There is no known upper bound. flake8 can be run from the python/ directory with no arguments. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Tested-by: Cleber Rosa <crosa@redhat.com> Message-id: 20210527211715.394144-21-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-05-28 00:17:04 +03:00
],
python: Re-lock pipenv at *oldest* supported versions tox is already testing the most recent versions. Let's use pipenv to test the oldest versions we claim to support. This matches the stylistic choice to have pipenv always test our oldest supported Python version, 3.6. The effect of this is that the python-check-pipenv CI job on gitlab will now test against much older versions of these linters, which will help highlight incompatible changes that might otherwise go unnoticed. Update instructions for adding and bumping versions in setup.cfg. The reason for deleting the line that gets added to Pipfile is largely just to avoid having the version minimums specified in multiple places in config checked into the tree. (This patch was written by deleting Pipfile and Pipfile.lock, then explicitly installing each dependency manually at a specific version. Then, I restored the prior Pipfile and re-ran `pipenv lock --dev --keep-outdated` to re-add the qemu dependency back to the pipenv environment while keeping the "old" packages. It's annoying, yes, but I think the improvement to test coverage is worthwhile.) Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Willian Rampazzo <willianr@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Message-id: 20210629214323.1329806-5-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-30 00:43:12 +03:00
"version": "==2.0.0"
python: Add flake8 to pipenv flake8 3.5.x does not support the --extend-ignore syntax used in the .flake8 file to gracefully extend default ignores, so 3.6.x is our minimum requirement. There is no known upper bound. flake8 can be run from the python/ directory with no arguments. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Tested-by: Cleber Rosa <crosa@redhat.com> Message-id: 20210527211715.394144-21-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-05-28 00:17:04 +03:00
},
python: add optional pygments dependency Added pygments as optional dependency for AQMP TUI. This is required for the upcoming syntax highlighting feature in AQMP TUI. The dependency has also been added in the devel optional group. Added mypy 'ignore_missing_imports' for pygments since it does not have any type stubs. Signed-off-by: G S Niteesh Babu <niteesh.gs@gmail.com> Message-Id: <20210823220746.28295-5-niteesh.gs@gmail.com> Signed-off-by: John Snow <jsnow@redhat.com>
2021-08-24 01:07:45 +03:00
"pygments": {
"hashes": [
"sha256:a18f47b506a429f6f4b9df81bb02beab9ca21d0a5fee38ed15aef65f0545519f",
"sha256:d66e804411278594d764fc69ec36ec13d9ae9147193a1740cd34d272ca383b8e"
],
"markers": "python_version >= '3.5'",
"version": "==2.9.0"
},
python: add pylint to pipenv We are specifying >= pylint 2.8.x for several reasons: 1. For setup.cfg support, added in pylint 2.5.x 2. To specify a version that has incompatibly dropped bad-whitespace checks (2.6.x) 3. 2.7.x fixes "unsubscriptable" warnings in Python 3.9 4. 2.8.x adds a new, incompatible 'consider-using-with' warning that must be disabled in some cases. These pragmas cause warnings themselves in 2.7.x. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Tested-by: Cleber Rosa <crosa@redhat.com> Message-id: 20210527211715.394144-18-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-05-28 00:17:01 +03:00
"pylint": {
"hashes": [
python: Re-lock pipenv at *oldest* supported versions tox is already testing the most recent versions. Let's use pipenv to test the oldest versions we claim to support. This matches the stylistic choice to have pipenv always test our oldest supported Python version, 3.6. The effect of this is that the python-check-pipenv CI job on gitlab will now test against much older versions of these linters, which will help highlight incompatible changes that might otherwise go unnoticed. Update instructions for adding and bumping versions in setup.cfg. The reason for deleting the line that gets added to Pipfile is largely just to avoid having the version minimums specified in multiple places in config checked into the tree. (This patch was written by deleting Pipfile and Pipfile.lock, then explicitly installing each dependency manually at a specific version. Then, I restored the prior Pipfile and re-ran `pipenv lock --dev --keep-outdated` to re-add the qemu dependency back to the pipenv environment while keeping the "old" packages. It's annoying, yes, but I think the improvement to test coverage is worthwhile.) Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Willian Rampazzo <willianr@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Message-id: 20210629214323.1329806-5-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-30 00:43:12 +03:00
"sha256:082a6d461b54f90eea49ca90fff4ee8b6e45e8029e5dbd72f6107ef84f3779c0",
"sha256:a01cd675eccf6e25b3bdb42be184eb46aaf89187d612ba0fb5f93328ed6b0fd5"
python: add pylint to pipenv We are specifying >= pylint 2.8.x for several reasons: 1. For setup.cfg support, added in pylint 2.5.x 2. To specify a version that has incompatibly dropped bad-whitespace checks (2.6.x) 3. 2.7.x fixes "unsubscriptable" warnings in Python 3.9 4. 2.8.x adds a new, incompatible 'consider-using-with' warning that must be disabled in some cases. These pragmas cause warnings themselves in 2.7.x. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Tested-by: Cleber Rosa <crosa@redhat.com> Message-id: 20210527211715.394144-18-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-05-28 00:17:01 +03:00
],
python: Re-lock pipenv at *oldest* supported versions tox is already testing the most recent versions. Let's use pipenv to test the oldest versions we claim to support. This matches the stylistic choice to have pipenv always test our oldest supported Python version, 3.6. The effect of this is that the python-check-pipenv CI job on gitlab will now test against much older versions of these linters, which will help highlight incompatible changes that might otherwise go unnoticed. Update instructions for adding and bumping versions in setup.cfg. The reason for deleting the line that gets added to Pipfile is largely just to avoid having the version minimums specified in multiple places in config checked into the tree. (This patch was written by deleting Pipfile and Pipfile.lock, then explicitly installing each dependency manually at a specific version. Then, I restored the prior Pipfile and re-ran `pipenv lock --dev --keep-outdated` to re-add the qemu dependency back to the pipenv environment while keeping the "old" packages. It's annoying, yes, but I think the improvement to test coverage is worthwhile.) Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Willian Rampazzo <willianr@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Message-id: 20210629214323.1329806-5-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-30 00:43:12 +03:00
"index": "pypi",
"version": "==2.8.0"
python: add pylint to pipenv We are specifying >= pylint 2.8.x for several reasons: 1. For setup.cfg support, added in pylint 2.5.x 2. To specify a version that has incompatibly dropped bad-whitespace checks (2.6.x) 3. 2.7.x fixes "unsubscriptable" warnings in Python 3.9 4. 2.8.x adds a new, incompatible 'consider-using-with' warning that must be disabled in some cases. These pragmas cause warnings themselves in 2.7.x. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Tested-by: Cleber Rosa <crosa@redhat.com> Message-id: 20210527211715.394144-18-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-05-28 00:17:01 +03:00
},
python/pipenv: Update Pipfile.lock In a previous commit, I added tox to the development requirements of the Python library. I never bothered to add them to the Pipfile, because they aren't needed there. Here, I sync it anyway in its own commit so that when we add new packages later that the diffstats will not confusingly appear to pull in lots of extra packages. Ideally I could tell Pipenv simply not to install these, but it doesn't seem to support that, exactly. The alternative is removing Tox from the development requires, which I'd rather not do. The other alternative is re-specifying all of the dependencies of setup.cfg in the Pipfile, which I'd also rather not do. Picking what feels least-worst here. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 20210603003719.1321369-2-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-03 03:37:01 +03:00
"pyparsing": {
"hashes": [
"sha256:c203ec8783bf771a155b207279b9bccb8dea02d8f0c9e5f8ead507bc3246ecc1",
"sha256:ef9d7589ef3c200abe66653d3f1ab1033c3c419ae9b9bdb1240a85b024efc88b"
],
"markers": "python_version >= '2.6' and python_version not in '3.0, 3.1, 3.2, 3.3'",
"version": "==2.4.7"
},
python: add devel package requirements to setuptools setuptools doesn't have a formal understanding of development requires, but it has an optional feataures section. Fine; add a "devel" feature and add the requirements to it. To avoid duplication, we can modify pipenv to install qemu[devel] instead. This enables us to run invocations like "pip install -e .[devel]" and test the package on bleeding-edge packages beyond those specified in Pipfile.lock. Importantly, this also allows us to install the qemu development packages in a non-networked mode: `pip3 install --no-index -e .[devel]` will now fail if the proper development dependencies are not already met. This can be useful for automated build scripts where fetching network packages may be undesirable. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Message-id: 20210527211715.394144-27-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-05-28 00:17:10 +03:00
"qemu": {
"editable": true,
"path": "."
},
python/pipenv: Update Pipfile.lock In a previous commit, I added tox to the development requirements of the Python library. I never bothered to add them to the Pipfile, because they aren't needed there. Here, I sync it anyway in its own commit so that when we add new packages later that the diffstats will not confusingly appear to pull in lots of extra packages. Ideally I could tell Pipenv simply not to install these, but it doesn't seem to support that, exactly. The alternative is removing Tox from the development requires, which I'd rather not do. The other alternative is re-specifying all of the dependencies of setup.cfg in the Pipfile, which I'd also rather not do. Picking what feels least-worst here. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 20210603003719.1321369-2-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-03 03:37:01 +03:00
"six": {
"hashes": [
"sha256:1e61c37477a1626458e36f7b1d82aa5c9b094fa4802892072e49de9c60c4c926",
"sha256:8abb2f1d86890a2dfb989f9a77cfcfd3e47c2a354b01111771326f8aa26e0254"
],
"markers": "python_version >= '2.7' and python_version not in '3.0, 3.1, 3.2, 3.3'",
"version": "==1.16.0"
},
python: add pylint to pipenv We are specifying >= pylint 2.8.x for several reasons: 1. For setup.cfg support, added in pylint 2.5.x 2. To specify a version that has incompatibly dropped bad-whitespace checks (2.6.x) 3. 2.7.x fixes "unsubscriptable" warnings in Python 3.9 4. 2.8.x adds a new, incompatible 'consider-using-with' warning that must be disabled in some cases. These pragmas cause warnings themselves in 2.7.x. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Tested-by: Cleber Rosa <crosa@redhat.com> Message-id: 20210527211715.394144-18-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-05-28 00:17:01 +03:00
"toml": {
"hashes": [
"sha256:806143ae5bfb6a3c6e736a764057db0e6a0e05e338b5630894a5f779cabb4f9b",
"sha256:b3bda1d108d5dd99f4a20d24d9c348e91c4db7ab1b749200bded2f839ccbe68f"
],
python/pipenv: Update Pipfile.lock In a previous commit, I added tox to the development requirements of the Python library. I never bothered to add them to the Pipfile, because they aren't needed there. Here, I sync it anyway in its own commit so that when we add new packages later that the diffstats will not confusingly appear to pull in lots of extra packages. Ideally I could tell Pipenv simply not to install these, but it doesn't seem to support that, exactly. The alternative is removing Tox from the development requires, which I'd rather not do. The other alternative is re-specifying all of the dependencies of setup.cfg in the Pipfile, which I'd also rather not do. Picking what feels least-worst here. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 20210603003719.1321369-2-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-03 03:37:01 +03:00
"markers": "python_version >= '2.6' and python_version not in '3.0, 3.1, 3.2, 3.3'",
python: add pylint to pipenv We are specifying >= pylint 2.8.x for several reasons: 1. For setup.cfg support, added in pylint 2.5.x 2. To specify a version that has incompatibly dropped bad-whitespace checks (2.6.x) 3. 2.7.x fixes "unsubscriptable" warnings in Python 3.9 4. 2.8.x adds a new, incompatible 'consider-using-with' warning that must be disabled in some cases. These pragmas cause warnings themselves in 2.7.x. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Tested-by: Cleber Rosa <crosa@redhat.com> Message-id: 20210527211715.394144-18-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-05-28 00:17:01 +03:00
"version": "==0.10.2"
},
python/pipenv: Update Pipfile.lock In a previous commit, I added tox to the development requirements of the Python library. I never bothered to add them to the Pipfile, because they aren't needed there. Here, I sync it anyway in its own commit so that when we add new packages later that the diffstats will not confusingly appear to pull in lots of extra packages. Ideally I could tell Pipenv simply not to install these, but it doesn't seem to support that, exactly. The alternative is removing Tox from the development requires, which I'd rather not do. The other alternative is re-specifying all of the dependencies of setup.cfg in the Pipfile, which I'd also rather not do. Picking what feels least-worst here. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 20210603003719.1321369-2-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-03 03:37:01 +03:00
"tox": {
"hashes": [
python: Re-lock pipenv at *oldest* supported versions tox is already testing the most recent versions. Let's use pipenv to test the oldest versions we claim to support. This matches the stylistic choice to have pipenv always test our oldest supported Python version, 3.6. The effect of this is that the python-check-pipenv CI job on gitlab will now test against much older versions of these linters, which will help highlight incompatible changes that might otherwise go unnoticed. Update instructions for adding and bumping versions in setup.cfg. The reason for deleting the line that gets added to Pipfile is largely just to avoid having the version minimums specified in multiple places in config checked into the tree. (This patch was written by deleting Pipfile and Pipfile.lock, then explicitly installing each dependency manually at a specific version. Then, I restored the prior Pipfile and re-ran `pipenv lock --dev --keep-outdated` to re-add the qemu dependency back to the pipenv environment while keeping the "old" packages. It's annoying, yes, but I think the improvement to test coverage is worthwhile.) Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Willian Rampazzo <willianr@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Message-id: 20210629214323.1329806-5-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-30 00:43:12 +03:00
"sha256:c60692d92fe759f46c610ac04c03cf0169432d1ff8e981e8ae63e068d0954fc3",
"sha256:f179cb4043d7dc1339425dd49ab1dd8c916246b0d9173143c1b0af7498a03ab0"
python/pipenv: Update Pipfile.lock In a previous commit, I added tox to the development requirements of the Python library. I never bothered to add them to the Pipfile, because they aren't needed there. Here, I sync it anyway in its own commit so that when we add new packages later that the diffstats will not confusingly appear to pull in lots of extra packages. Ideally I could tell Pipenv simply not to install these, but it doesn't seem to support that, exactly. The alternative is removing Tox from the development requires, which I'd rather not do. The other alternative is re-specifying all of the dependencies of setup.cfg in the Pipfile, which I'd also rather not do. Picking what feels least-worst here. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 20210603003719.1321369-2-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-03 03:37:01 +03:00
],
python: Re-lock pipenv at *oldest* supported versions tox is already testing the most recent versions. Let's use pipenv to test the oldest versions we claim to support. This matches the stylistic choice to have pipenv always test our oldest supported Python version, 3.6. The effect of this is that the python-check-pipenv CI job on gitlab will now test against much older versions of these linters, which will help highlight incompatible changes that might otherwise go unnoticed. Update instructions for adding and bumping versions in setup.cfg. The reason for deleting the line that gets added to Pipfile is largely just to avoid having the version minimums specified in multiple places in config checked into the tree. (This patch was written by deleting Pipfile and Pipfile.lock, then explicitly installing each dependency manually at a specific version. Then, I restored the prior Pipfile and re-ran `pipenv lock --dev --keep-outdated` to re-add the qemu dependency back to the pipenv environment while keeping the "old" packages. It's annoying, yes, but I think the improvement to test coverage is worthwhile.) Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Willian Rampazzo <willianr@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Message-id: 20210629214323.1329806-5-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-30 00:43:12 +03:00
"index": "pypi",
"version": "==3.18.0"
python/pipenv: Update Pipfile.lock In a previous commit, I added tox to the development requirements of the Python library. I never bothered to add them to the Pipfile, because they aren't needed there. Here, I sync it anyway in its own commit so that when we add new packages later that the diffstats will not confusingly appear to pull in lots of extra packages. Ideally I could tell Pipenv simply not to install these, but it doesn't seem to support that, exactly. The alternative is removing Tox from the development requires, which I'd rather not do. The other alternative is re-specifying all of the dependencies of setup.cfg in the Pipfile, which I'd also rather not do. Picking what feels least-worst here. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 20210603003719.1321369-2-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-03 03:37:01 +03:00
},
python: add pylint to pipenv We are specifying >= pylint 2.8.x for several reasons: 1. For setup.cfg support, added in pylint 2.5.x 2. To specify a version that has incompatibly dropped bad-whitespace checks (2.6.x) 3. 2.7.x fixes "unsubscriptable" warnings in Python 3.9 4. 2.8.x adds a new, incompatible 'consider-using-with' warning that must be disabled in some cases. These pragmas cause warnings themselves in 2.7.x. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Tested-by: Cleber Rosa <crosa@redhat.com> Message-id: 20210527211715.394144-18-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-05-28 00:17:01 +03:00
"typed-ast": {
"hashes": [
"sha256:01ae5f73431d21eead5015997ab41afa53aa1fbe252f9da060be5dad2c730ace",
"sha256:067a74454df670dcaa4e59349a2e5c81e567d8d65458d480a5b3dfecec08c5ff",
"sha256:0fb71b8c643187d7492c1f8352f2c15b4c4af3f6338f21681d3681b3dc31a266",
"sha256:1b3ead4a96c9101bef08f9f7d1217c096f31667617b58de957f690c92378b528",
"sha256:2068531575a125b87a41802130fa7e29f26c09a2833fea68d9a40cf33902eba6",
"sha256:209596a4ec71d990d71d5e0d312ac935d86930e6eecff6ccc7007fe54d703808",
"sha256:2c726c276d09fc5c414693a2de063f521052d9ea7c240ce553316f70656c84d4",
"sha256:398e44cd480f4d2b7ee8d98385ca104e35c81525dd98c519acff1b79bdaac363",
"sha256:52b1eb8c83f178ab787f3a4283f68258525f8d70f778a2f6dd54d3b5e5fb4341",
"sha256:5feca99c17af94057417d744607b82dd0a664fd5e4ca98061480fd8b14b18d04",
"sha256:7538e495704e2ccda9b234b82423a4038f324f3a10c43bc088a1636180f11a41",
"sha256:760ad187b1041a154f0e4d0f6aae3e40fdb51d6de16e5c99aedadd9246450e9e",
"sha256:777a26c84bea6cd934422ac2e3b78863a37017618b6e5c08f92ef69853e765d3",
"sha256:95431a26309a21874005845c21118c83991c63ea800dd44843e42a916aec5899",
"sha256:9ad2c92ec681e02baf81fdfa056fe0d818645efa9af1f1cd5fd6f1bd2bdfd805",
"sha256:9c6d1a54552b5330bc657b7ef0eae25d00ba7ffe85d9ea8ae6540d2197a3788c",
"sha256:aee0c1256be6c07bd3e1263ff920c325b59849dc95392a05f258bb9b259cf39c",
"sha256:af3d4a73793725138d6b334d9d247ce7e5f084d96284ed23f22ee626a7b88e39",
"sha256:b36b4f3920103a25e1d5d024d155c504080959582b928e91cb608a65c3a49e1a",
"sha256:b9574c6f03f685070d859e75c7f9eeca02d6933273b5e69572e5ff9d5e3931c3",
"sha256:bff6ad71c81b3bba8fa35f0f1921fb24ff4476235a6e94a26ada2e54370e6da7",
"sha256:c190f0899e9f9f8b6b7863debfb739abcb21a5c054f911ca3596d12b8a4c4c7f",
"sha256:c907f561b1e83e93fad565bac5ba9c22d96a54e7ea0267c708bffe863cbe4075",
"sha256:cae53c389825d3b46fb37538441f75d6aecc4174f615d048321b716df2757fb0",
"sha256:dd4a21253f42b8d2b48410cb31fe501d32f8b9fbeb1f55063ad102fe9c425e40",
"sha256:dde816ca9dac1d9c01dd504ea5967821606f02e510438120091b84e852367428",
"sha256:f2362f3cb0f3172c42938946dbc5b7843c2a28aec307c49100c8b38764eb6927",
"sha256:f328adcfebed9f11301eaedfa48e15bdece9b519fb27e6a8c01aa52a17ec31b3",
"sha256:f8afcf15cc511ada719a88e013cec87c11aff7b91f019295eb4530f96fe5ef2f",
"sha256:fb1bbeac803adea29cedd70781399c99138358c26d05fcbd23c13016b7f5ec65"
],
python/pipenv: Update Pipfile.lock In a previous commit, I added tox to the development requirements of the Python library. I never bothered to add them to the Pipfile, because they aren't needed there. Here, I sync it anyway in its own commit so that when we add new packages later that the diffstats will not confusingly appear to pull in lots of extra packages. Ideally I could tell Pipenv simply not to install these, but it doesn't seem to support that, exactly. The alternative is removing Tox from the development requires, which I'd rather not do. The other alternative is re-specifying all of the dependencies of setup.cfg in the Pipfile, which I'd also rather not do. Picking what feels least-worst here. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 20210603003719.1321369-2-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-03 03:37:01 +03:00
"markers": "python_version < '3.8' and implementation_name == 'cpython'",
python: add pylint to pipenv We are specifying >= pylint 2.8.x for several reasons: 1. For setup.cfg support, added in pylint 2.5.x 2. To specify a version that has incompatibly dropped bad-whitespace checks (2.6.x) 3. 2.7.x fixes "unsubscriptable" warnings in Python 3.9 4. 2.8.x adds a new, incompatible 'consider-using-with' warning that must be disabled in some cases. These pragmas cause warnings themselves in 2.7.x. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Tested-by: Cleber Rosa <crosa@redhat.com> Message-id: 20210527211715.394144-18-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-05-28 00:17:01 +03:00
"version": "==1.4.3"
},
python: Add flake8 to pipenv flake8 3.5.x does not support the --extend-ignore syntax used in the .flake8 file to gracefully extend default ignores, so 3.6.x is our minimum requirement. There is no known upper bound. flake8 can be run from the python/ directory with no arguments. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Tested-by: Cleber Rosa <crosa@redhat.com> Message-id: 20210527211715.394144-21-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-05-28 00:17:04 +03:00
"typing-extensions": {
"hashes": [
"sha256:0ac0f89795dd19de6b97debb0c6af1c70987fd80a2d62d1958f7e56fcc31b497",
"sha256:50b6f157849174217d0656f99dc82fe932884fb250826c18350e159ec6cdf342",
"sha256:779383f6086d90c99ae41cf0ff39aac8a7937a9283ce0a414e5dd782f4c94a84"
],
"markers": "python_version < '3.8'",
"version": "==3.10.0.0"
},
python: Add dependencies for AQMP TUI Added dependencies for the upcoming AQMP TUI under the optional 'tui' group. The same dependencies have also been added under the devel group since no work around has been found for optional groups to imply other optional groups. Signed-off-by: G S Niteesh Babu <niteesh.gs@gmail.com> Message-Id: <20210823220746.28295-2-niteesh.gs@gmail.com> Signed-off-by: John Snow <jsnow@redhat.com>
2021-08-24 01:07:42 +03:00
"urwid": {
"hashes": [
"sha256:588bee9c1cb208d0906a9f73c613d2bd32c3ed3702012f51efe318a3f2127eae"
],
"version": "==2.1.2"
},
"urwid-readline": {
"hashes": [
"sha256:018020cbc864bb5ed87be17dc26b069eae2755cb29f3a9c569aac3bded1efaf4"
],
"version": "==0.13"
},
python/pipenv: Update Pipfile.lock In a previous commit, I added tox to the development requirements of the Python library. I never bothered to add them to the Pipfile, because they aren't needed there. Here, I sync it anyway in its own commit so that when we add new packages later that the diffstats will not confusingly appear to pull in lots of extra packages. Ideally I could tell Pipenv simply not to install these, but it doesn't seem to support that, exactly. The alternative is removing Tox from the development requires, which I'd rather not do. The other alternative is re-specifying all of the dependencies of setup.cfg in the Pipfile, which I'd also rather not do. Picking what feels least-worst here. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 20210603003719.1321369-2-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-03 03:37:01 +03:00
"virtualenv": {
"hashes": [
"sha256:14fdf849f80dbb29a4eb6caa9875d476ee2a5cf76a5f5415fa2f1606010ab467",
"sha256:2b0126166ea7c9c3661f5b8e06773d28f83322de7a3ff7d06f0aed18c9de6a76"
],
"markers": "python_version >= '2.7' and python_version not in '3.0, 3.1, 3.2, 3.3'",
"version": "==20.4.7"
},
python: add pylint to pipenv We are specifying >= pylint 2.8.x for several reasons: 1. For setup.cfg support, added in pylint 2.5.x 2. To specify a version that has incompatibly dropped bad-whitespace checks (2.6.x) 3. 2.7.x fixes "unsubscriptable" warnings in Python 3.9 4. 2.8.x adds a new, incompatible 'consider-using-with' warning that must be disabled in some cases. These pragmas cause warnings themselves in 2.7.x. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Tested-by: Cleber Rosa <crosa@redhat.com> Message-id: 20210527211715.394144-18-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-05-28 00:17:01 +03:00
"wrapt": {
"hashes": [
"sha256:b62ffa81fb85f4332a4f609cab4ac40709470da05643a082ec1eb88e6d9b97d7"
],
"version": "==1.12.1"
python: Add flake8 to pipenv flake8 3.5.x does not support the --extend-ignore syntax used in the .flake8 file to gracefully extend default ignores, so 3.6.x is our minimum requirement. There is no known upper bound. flake8 can be run from the python/ directory with no arguments. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Tested-by: Cleber Rosa <crosa@redhat.com> Message-id: 20210527211715.394144-21-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-05-28 00:17:04 +03:00
},
"zipp": {
"hashes": [
"sha256:3607921face881ba3e026887d8150cca609d517579abe052ac81fc5aeffdbd76",
"sha256:51cb66cc54621609dd593d1787f286ee42a5c0adbb4b29abea5a63edc3e03098"
],
python/pipenv: Update Pipfile.lock In a previous commit, I added tox to the development requirements of the Python library. I never bothered to add them to the Pipfile, because they aren't needed there. Here, I sync it anyway in its own commit so that when we add new packages later that the diffstats will not confusingly appear to pull in lots of extra packages. Ideally I could tell Pipenv simply not to install these, but it doesn't seem to support that, exactly. The alternative is removing Tox from the development requires, which I'd rather not do. The other alternative is re-specifying all of the dependencies of setup.cfg in the Pipfile, which I'd also rather not do. Picking what feels least-worst here. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 20210603003719.1321369-2-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-03 03:37:01 +03:00
"markers": "python_version < '3.10'",
python: Add flake8 to pipenv flake8 3.5.x does not support the --extend-ignore syntax used in the .flake8 file to gracefully extend default ignores, so 3.6.x is our minimum requirement. There is no known upper bound. flake8 can be run from the python/ directory with no arguments. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Tested-by: Cleber Rosa <crosa@redhat.com> Message-id: 20210527211715.394144-21-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-05-28 00:17:04 +03:00
"version": "==3.4.1"
python: add pylint to pipenv We are specifying >= pylint 2.8.x for several reasons: 1. For setup.cfg support, added in pylint 2.5.x 2. To specify a version that has incompatibly dropped bad-whitespace checks (2.6.x) 3. 2.7.x fixes "unsubscriptable" warnings in Python 3.9 4. 2.8.x adds a new, incompatible 'consider-using-with' warning that must be disabled in some cases. These pragmas cause warnings themselves in 2.7.x. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Tested-by: Cleber Rosa <crosa@redhat.com> Message-id: 20210527211715.394144-18-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-05-28 00:17:01 +03:00
}
}
}
Reference in New Issue Copy Permalink