qemu/hw/mips/Kconfig

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

95 lines
1.7 KiB
Plaintext
Raw Normal View History

config MALTA
bool
default y
depends on MIPS
imply PCNET_PCI
imply PCI_DEVICES
imply TEST_DEVICES
select FDC37M81X
select GT64120
select MIPS_CPS
select PIIX
select PFLASH_CFI01
select SERIAL
select SMBUS_EEPROM
config MIPSSIM
bool
default y
depends on MIPS
select SERIAL
select MIPSNET
config JAZZ
bool
default y
depends on MIPS64
select ISA_BUS
select RC4030
select I8259
select I8254
select I8257
select PCSPK
select VGA_MMIO
select G364FB
select DP8393X
select ESP
select FDC_SYSBUS
select MC146818RTC
select PCKBD
select SERIAL
select PARALLEL
select DS1225Y
select JAZZ_LED
config FULOONG
bool
default y
depends on MIPS64 && !TARGET_BIG_ENDIAN
imply PCI_DEVICES
imply TEST_DEVICES
imply ATI_VGA
imply RTL8139_PCI
select PCI_BONITO
select SMBUS_EEPROM
select VT82C686
hw/mips: Add Loongson-3 machine support Add Loongson-3 based machine support, it use liointc as the interrupt controler and use GPEX as the pci controller. Currently it can work with both TCG and KVM. As the machine model is not based on any exiting physical hardware, the name of the machine is "loongson3-virt". It may be superseded in future by a real machine model. If this happens, then a regular deprecation procedure shall occur for "loongson3-virt" machine. We now already have a full functional Linux kernel (based on Linux-5.4.x LTS) here: https://github.com/chenhuacai/linux Of course the upstream kernel is also usable (the kvm host side and guest side have both been upstream in Linux-5.9): https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git How to use QEMU/Loongson-3? 1, Download kernel source from the above URL; 2, Build a kernel with arch/mips/configs/loongson3_defconfig; 3, Boot a Loongson-3A4000 host with this kernel (for KVM mode); 4, Build QEMU-master with this patchset; 5, modprobe kvm (only necessary for KVM mode); 6, Use QEMU with TCG: qemu-system-mips64el -M loongson3-virt,accel=tcg -cpu Loongson-3A1000 -kernel <path_to_kernel> -append ... Use QEMU with KVM: qemu-system-mips64el -M loongson3-virt,accel=kvm -cpu Loongson-3A4000 -kernel <path_to_kernel> -append ... The "-cpu" parameter is optional here and QEMU will use the correct type for TCG/KVM automatically. Co-developed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@kernel.org> Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Message-Id: <20201221110538.3186646-5-chenhuacai@kernel.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> [PMD: Set TYPE_LOONGSON_MACHINE instance_size in TypeInfo, select FW_CFG_MIPS in Kconfig] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2020-04-27 12:33:14 +03:00
config LOONGSON3V
bool
default y
depends on MIPS64 && !TARGET_BIG_ENDIAN
imply PCI_DEVICES
imply TEST_DEVICES
imply VIRTIO_PCI
imply VIRTIO_NET
hw/mips: Add Loongson-3 machine support Add Loongson-3 based machine support, it use liointc as the interrupt controler and use GPEX as the pci controller. Currently it can work with both TCG and KVM. As the machine model is not based on any exiting physical hardware, the name of the machine is "loongson3-virt". It may be superseded in future by a real machine model. If this happens, then a regular deprecation procedure shall occur for "loongson3-virt" machine. We now already have a full functional Linux kernel (based on Linux-5.4.x LTS) here: https://github.com/chenhuacai/linux Of course the upstream kernel is also usable (the kvm host side and guest side have both been upstream in Linux-5.9): https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git How to use QEMU/Loongson-3? 1, Download kernel source from the above URL; 2, Build a kernel with arch/mips/configs/loongson3_defconfig; 3, Boot a Loongson-3A4000 host with this kernel (for KVM mode); 4, Build QEMU-master with this patchset; 5, modprobe kvm (only necessary for KVM mode); 6, Use QEMU with TCG: qemu-system-mips64el -M loongson3-virt,accel=tcg -cpu Loongson-3A1000 -kernel <path_to_kernel> -append ... Use QEMU with KVM: qemu-system-mips64el -M loongson3-virt,accel=kvm -cpu Loongson-3A4000 -kernel <path_to_kernel> -append ... The "-cpu" parameter is optional here and QEMU will use the correct type for TCG/KVM automatically. Co-developed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@kernel.org> Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Message-Id: <20201221110538.3186646-5-chenhuacai@kernel.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> [PMD: Set TYPE_LOONGSON_MACHINE instance_size in TypeInfo, select FW_CFG_MIPS in Kconfig] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2020-04-27 12:33:14 +03:00
imply VIRTIO_VGA
imply QXL if SPICE
imply USB_OHCI_PCI
hw/mips: Add Loongson-3 machine support Add Loongson-3 based machine support, it use liointc as the interrupt controler and use GPEX as the pci controller. Currently it can work with both TCG and KVM. As the machine model is not based on any exiting physical hardware, the name of the machine is "loongson3-virt". It may be superseded in future by a real machine model. If this happens, then a regular deprecation procedure shall occur for "loongson3-virt" machine. We now already have a full functional Linux kernel (based on Linux-5.4.x LTS) here: https://github.com/chenhuacai/linux Of course the upstream kernel is also usable (the kvm host side and guest side have both been upstream in Linux-5.9): https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git How to use QEMU/Loongson-3? 1, Download kernel source from the above URL; 2, Build a kernel with arch/mips/configs/loongson3_defconfig; 3, Boot a Loongson-3A4000 host with this kernel (for KVM mode); 4, Build QEMU-master with this patchset; 5, modprobe kvm (only necessary for KVM mode); 6, Use QEMU with TCG: qemu-system-mips64el -M loongson3-virt,accel=tcg -cpu Loongson-3A1000 -kernel <path_to_kernel> -append ... Use QEMU with KVM: qemu-system-mips64el -M loongson3-virt,accel=kvm -cpu Loongson-3A4000 -kernel <path_to_kernel> -append ... The "-cpu" parameter is optional here and QEMU will use the correct type for TCG/KVM automatically. Co-developed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@kernel.org> Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Message-Id: <20201221110538.3186646-5-chenhuacai@kernel.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> [PMD: Set TYPE_LOONGSON_MACHINE instance_size in TypeInfo, select FW_CFG_MIPS in Kconfig] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2020-04-27 12:33:14 +03:00
select SERIAL
select GOLDFISH_RTC
select LOONGSON_LIOINTC
select PCI_EXPRESS_GENERIC_BRIDGE
select MSI_NONBROKEN
select FW_CFG_MIPS
select UNIMP
hw/mips: Add Loongson-3 machine support Add Loongson-3 based machine support, it use liointc as the interrupt controler and use GPEX as the pci controller. Currently it can work with both TCG and KVM. As the machine model is not based on any exiting physical hardware, the name of the machine is "loongson3-virt". It may be superseded in future by a real machine model. If this happens, then a regular deprecation procedure shall occur for "loongson3-virt" machine. We now already have a full functional Linux kernel (based on Linux-5.4.x LTS) here: https://github.com/chenhuacai/linux Of course the upstream kernel is also usable (the kvm host side and guest side have both been upstream in Linux-5.9): https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git How to use QEMU/Loongson-3? 1, Download kernel source from the above URL; 2, Build a kernel with arch/mips/configs/loongson3_defconfig; 3, Boot a Loongson-3A4000 host with this kernel (for KVM mode); 4, Build QEMU-master with this patchset; 5, modprobe kvm (only necessary for KVM mode); 6, Use QEMU with TCG: qemu-system-mips64el -M loongson3-virt,accel=tcg -cpu Loongson-3A1000 -kernel <path_to_kernel> -append ... Use QEMU with KVM: qemu-system-mips64el -M loongson3-virt,accel=kvm -cpu Loongson-3A4000 -kernel <path_to_kernel> -append ... The "-cpu" parameter is optional here and QEMU will use the correct type for TCG/KVM automatically. Co-developed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@kernel.org> Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Message-Id: <20201221110538.3186646-5-chenhuacai@kernel.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> [PMD: Set TYPE_LOONGSON_MACHINE instance_size in TypeInfo, select FW_CFG_MIPS in Kconfig] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2020-04-27 12:33:14 +03:00
config MIPS_CPS
bool
select MIPS_ITU
config MIPS_BOSTON
bool
default y
depends on MIPS64 && !TARGET_BIG_ENDIAN && FDT
imply PCI_DEVICES
imply TEST_DEVICES
select DEVICE_TREE
select FITLOADER
select MIPS_CPS
select PCI_EXPRESS_XILINX
select AHCI_ICH9
select SERIAL
config FW_CFG_MIPS
bool