qemu/hw/misc/aspeed_sdmc.c

525 lines
15 KiB
C
Raw Normal View History

/*
* ASPEED SDRAM Memory Controller
*
* Copyright (C) 2016 IBM Corp.
*
* This code is licensed under the GPL version 2 or later. See
* the COPYING file in the top-level directory.
*/
#include "qemu/osdep.h"
#include "qemu/log.h"
#include "qemu/module.h"
#include "qemu/error-report.h"
#include "hw/misc/aspeed_sdmc.h"
#include "hw/misc/aspeed_scu.h"
#include "hw/qdev-properties.h"
#include "migration/vmstate.h"
#include "qapi/error.h"
#include "trace.h"
arm/aspeed: actually check RAM size It's supposed that SOC will check if "-m" provided RAM size is valid by setting "ram-size" property and then board would read back valid (possibly corrected value) to map RAM MemoryReging with valid size. It isn't doing so, since check is called only indirectly from aspeed_sdmc_reset()->asc->compute_conf() or much later when guest writes to configuration register. So depending on "-m" value QEMU end-ups with a warning and an invalid MemoryRegion size allocated and mapped. (examples: -M ast2500-evb -m 1M 0000000080000000-000000017ffffffe (prio 0, i/o): aspeed-ram-container 0000000080000000-00000000800fffff (prio 0, ram): ram 0000000080100000-00000000bfffffff (prio 0, i/o): max_ram -M ast2500-evb -m 3G 0000000080000000-000000017ffffffe (prio 0, i/o): aspeed-ram-container 0000000080000000-000000013fffffff (prio 0, ram): ram [DETECTED OVERFLOW!] 0000000140000000-00000000bfffffff (prio 0, i/o): max_ram ) On top of that sdmc falls back and reports to guest "default" size, it thinks machine should have. This patch makes ram-size check actually work and changes behavior from a warning later on during machine reset to error_fatal at the moment SOC.ram-size is set so user will have to fix RAM size on CLI to start machine. It also gets out of the way mutable ram-size logic, so we could consolidate RAM allocation logic around pre-allocated hostmem backend (supplied by user or auto created by generic machine code depending on supplied -m/mem-path/mem-prealloc options. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200219160953.13771-10-imammedo@redhat.com>
2020-02-19 19:08:43 +03:00
#include "qemu/units.h"
#include "qemu/cutils.h"
#include "qapi/visitor.h"
/* Protection Key Register */
#define R_PROT (0x00 / 4)
#define PROT_UNLOCKED 0x01
#define PROT_HARDLOCKED 0x10 /* AST2600 */
#define PROT_SOFTLOCKED 0x00
#define PROT_KEY_UNLOCK 0xFC600309
#define PROT_KEY_HARDLOCK 0xDEADDEAD /* AST2600 */
/* Configuration Register */
#define R_CONF (0x04 / 4)
/* Interrupt control/status */
#define R_ISR (0x50 / 4)
/* Control/Status Register #1 (ast2500) */
#define R_STATUS1 (0x60 / 4)
#define PHY_BUSY_STATE BIT(0)
#define PHY_PLL_LOCK_STATUS BIT(4)
/* Reserved */
#define R_MCR6C (0x6c / 4)
#define R_ECC_TEST_CTRL (0x70 / 4)
#define ECC_TEST_FINISHED BIT(12)
#define ECC_TEST_FAIL BIT(13)
#define R_TEST_START_LEN (0x74 / 4)
#define R_TEST_FAIL_DQ (0x78 / 4)
#define R_TEST_INIT_VAL (0x7c / 4)
#define R_DRAM_SW (0x88 / 4)
#define R_DRAM_TIME (0x8c / 4)
#define R_ECC_ERR_INJECT (0xb4 / 4)
/*
* Configuration register Ox4 (for Aspeed AST2400 SOC)
*
* These are for the record and future use. ASPEED_SDMC_DRAM_SIZE is
* what we care about right now as it is checked by U-Boot to
* determine the RAM size.
*/
#define ASPEED_SDMC_RESERVED 0xFFFFF800 /* 31:11 reserved */
#define ASPEED_SDMC_AST2300_COMPAT (1 << 10)
#define ASPEED_SDMC_SCRAMBLE_PATTERN (1 << 9)
#define ASPEED_SDMC_DATA_SCRAMBLE (1 << 8)
#define ASPEED_SDMC_ECC_ENABLE (1 << 7)
#define ASPEED_SDMC_VGA_COMPAT (1 << 6) /* readonly */
#define ASPEED_SDMC_DRAM_BANK (1 << 5)
#define ASPEED_SDMC_DRAM_BURST (1 << 4)
#define ASPEED_SDMC_VGA_APERTURE(x) ((x & 0x3) << 2) /* readonly */
#define ASPEED_SDMC_VGA_8MB 0x0
#define ASPEED_SDMC_VGA_16MB 0x1
#define ASPEED_SDMC_VGA_32MB 0x2
#define ASPEED_SDMC_VGA_64MB 0x3
#define ASPEED_SDMC_DRAM_SIZE(x) (x & 0x3)
#define ASPEED_SDMC_DRAM_64MB 0x0
#define ASPEED_SDMC_DRAM_128MB 0x1
#define ASPEED_SDMC_DRAM_256MB 0x2
#define ASPEED_SDMC_DRAM_512MB 0x3
#define ASPEED_SDMC_READONLY_MASK \
(ASPEED_SDMC_RESERVED | ASPEED_SDMC_VGA_COMPAT | \
ASPEED_SDMC_VGA_APERTURE(ASPEED_SDMC_VGA_64MB))
/*
* Configuration register Ox4 (for Aspeed AST2500 SOC and higher)
*
* Incompatibilities are annotated in the list. ASPEED_SDMC_HW_VERSION
* should be set to 1 for the AST2500 SOC.
*/
#define ASPEED_SDMC_HW_VERSION(x) ((x & 0xf) << 28) /* readonly */
#define ASPEED_SDMC_SW_VERSION ((x & 0xff) << 20)
#define ASPEED_SDMC_CACHE_INITIAL_DONE (1 << 19) /* readonly */
#define ASPEED_SDMC_AST2500_RESERVED 0x7C000 /* 18:14 reserved */
#define ASPEED_SDMC_CACHE_DDR4_CONF (1 << 13)
#define ASPEED_SDMC_CACHE_INITIAL (1 << 12)
#define ASPEED_SDMC_CACHE_RANGE_CTRL (1 << 11)
#define ASPEED_SDMC_CACHE_ENABLE (1 << 10) /* differs from AST2400 */
#define ASPEED_SDMC_DRAM_TYPE (1 << 4) /* differs from AST2400 */
/* DRAM size definitions differs */
#define ASPEED_SDMC_AST2500_128MB 0x0
#define ASPEED_SDMC_AST2500_256MB 0x1
#define ASPEED_SDMC_AST2500_512MB 0x2
#define ASPEED_SDMC_AST2500_1024MB 0x3
#define ASPEED_SDMC_AST2600_256MB 0x0
#define ASPEED_SDMC_AST2600_512MB 0x1
#define ASPEED_SDMC_AST2600_1024MB 0x2
#define ASPEED_SDMC_AST2600_2048MB 0x3
#define ASPEED_SDMC_AST2500_READONLY_MASK \
(ASPEED_SDMC_HW_VERSION(0xf) | ASPEED_SDMC_CACHE_INITIAL_DONE | \
ASPEED_SDMC_AST2500_RESERVED | ASPEED_SDMC_VGA_COMPAT | \
ASPEED_SDMC_VGA_APERTURE(ASPEED_SDMC_VGA_64MB))
static uint64_t aspeed_sdmc_read(void *opaque, hwaddr addr, unsigned size)
{
AspeedSDMCState *s = ASPEED_SDMC(opaque);
addr >>= 2;
if (addr >= ARRAY_SIZE(s->regs)) {
qemu_log_mask(LOG_GUEST_ERROR,
"%s: Out-of-bounds read at offset 0x%" HWADDR_PRIx "\n",
__func__, addr * 4);
return 0;
}
trace_aspeed_sdmc_read(addr, s->regs[addr]);
return s->regs[addr];
}
static void aspeed_sdmc_write(void *opaque, hwaddr addr, uint64_t data,
unsigned int size)
{
AspeedSDMCState *s = ASPEED_SDMC(opaque);
AspeedSDMCClass *asc = ASPEED_SDMC_GET_CLASS(s);
addr >>= 2;
if (addr >= ARRAY_SIZE(s->regs)) {
qemu_log_mask(LOG_GUEST_ERROR,
"%s: Out-of-bounds write at offset 0x%" HWADDR_PRIx "\n",
__func__, addr);
return;
}
trace_aspeed_sdmc_write(addr, data);
asc->write(s, addr, data);
}
static const MemoryRegionOps aspeed_sdmc_ops = {
.read = aspeed_sdmc_read,
.write = aspeed_sdmc_write,
.endianness = DEVICE_LITTLE_ENDIAN,
.valid.min_access_size = 4,
.valid.max_access_size = 4,
};
static void aspeed_sdmc_reset(DeviceState *dev)
{
AspeedSDMCState *s = ASPEED_SDMC(dev);
AspeedSDMCClass *asc = ASPEED_SDMC_GET_CLASS(s);
memset(s->regs, 0, sizeof(s->regs));
/* Set ram size bit and defaults values */
s->regs[R_CONF] = asc->compute_conf(s, 0);
/*
* PHY status:
* - set phy status ok (set bit 1)
* - initial PVT calibration ok (clear bit 3)
* - runtime calibration ok (clear bit 5)
*/
s->regs[0x100] = BIT(1);
/* PHY eye window: set all as passing */
s->regs[0x100 | (0x68 / 4)] = 0xff;
s->regs[0x100 | (0x7c / 4)] = 0xff;
s->regs[0x100 | (0x50 / 4)] = 0xfffffff;
}
arm/aspeed: actually check RAM size It's supposed that SOC will check if "-m" provided RAM size is valid by setting "ram-size" property and then board would read back valid (possibly corrected value) to map RAM MemoryReging with valid size. It isn't doing so, since check is called only indirectly from aspeed_sdmc_reset()->asc->compute_conf() or much later when guest writes to configuration register. So depending on "-m" value QEMU end-ups with a warning and an invalid MemoryRegion size allocated and mapped. (examples: -M ast2500-evb -m 1M 0000000080000000-000000017ffffffe (prio 0, i/o): aspeed-ram-container 0000000080000000-00000000800fffff (prio 0, ram): ram 0000000080100000-00000000bfffffff (prio 0, i/o): max_ram -M ast2500-evb -m 3G 0000000080000000-000000017ffffffe (prio 0, i/o): aspeed-ram-container 0000000080000000-000000013fffffff (prio 0, ram): ram [DETECTED OVERFLOW!] 0000000140000000-00000000bfffffff (prio 0, i/o): max_ram ) On top of that sdmc falls back and reports to guest "default" size, it thinks machine should have. This patch makes ram-size check actually work and changes behavior from a warning later on during machine reset to error_fatal at the moment SOC.ram-size is set so user will have to fix RAM size on CLI to start machine. It also gets out of the way mutable ram-size logic, so we could consolidate RAM allocation logic around pre-allocated hostmem backend (supplied by user or auto created by generic machine code depending on supplied -m/mem-path/mem-prealloc options. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200219160953.13771-10-imammedo@redhat.com>
2020-02-19 19:08:43 +03:00
static void aspeed_sdmc_get_ram_size(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
AspeedSDMCState *s = ASPEED_SDMC(obj);
int64_t value = s->ram_size;
visit_type_int(v, name, &value, errp);
}
static void aspeed_sdmc_set_ram_size(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
int i;
char *sz;
int64_t value;
AspeedSDMCState *s = ASPEED_SDMC(obj);
AspeedSDMCClass *asc = ASPEED_SDMC_GET_CLASS(s);
error: Eliminate error_propagate() with Coccinelle, part 1 When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-07 19:06:02 +03:00
if (!visit_type_int(v, name, &value, errp)) {
arm/aspeed: actually check RAM size It's supposed that SOC will check if "-m" provided RAM size is valid by setting "ram-size" property and then board would read back valid (possibly corrected value) to map RAM MemoryReging with valid size. It isn't doing so, since check is called only indirectly from aspeed_sdmc_reset()->asc->compute_conf() or much later when guest writes to configuration register. So depending on "-m" value QEMU end-ups with a warning and an invalid MemoryRegion size allocated and mapped. (examples: -M ast2500-evb -m 1M 0000000080000000-000000017ffffffe (prio 0, i/o): aspeed-ram-container 0000000080000000-00000000800fffff (prio 0, ram): ram 0000000080100000-00000000bfffffff (prio 0, i/o): max_ram -M ast2500-evb -m 3G 0000000080000000-000000017ffffffe (prio 0, i/o): aspeed-ram-container 0000000080000000-000000013fffffff (prio 0, ram): ram [DETECTED OVERFLOW!] 0000000140000000-00000000bfffffff (prio 0, i/o): max_ram ) On top of that sdmc falls back and reports to guest "default" size, it thinks machine should have. This patch makes ram-size check actually work and changes behavior from a warning later on during machine reset to error_fatal at the moment SOC.ram-size is set so user will have to fix RAM size on CLI to start machine. It also gets out of the way mutable ram-size logic, so we could consolidate RAM allocation logic around pre-allocated hostmem backend (supplied by user or auto created by generic machine code depending on supplied -m/mem-path/mem-prealloc options. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200219160953.13771-10-imammedo@redhat.com>
2020-02-19 19:08:43 +03:00
return;
}
for (i = 0; asc->valid_ram_sizes[i]; i++) {
if (value == asc->valid_ram_sizes[i]) {
s->ram_size = value;
return;
}
}
sz = size_to_str(value);
error_setg(errp, "Invalid RAM size %s", sz);
arm/aspeed: actually check RAM size It's supposed that SOC will check if "-m" provided RAM size is valid by setting "ram-size" property and then board would read back valid (possibly corrected value) to map RAM MemoryReging with valid size. It isn't doing so, since check is called only indirectly from aspeed_sdmc_reset()->asc->compute_conf() or much later when guest writes to configuration register. So depending on "-m" value QEMU end-ups with a warning and an invalid MemoryRegion size allocated and mapped. (examples: -M ast2500-evb -m 1M 0000000080000000-000000017ffffffe (prio 0, i/o): aspeed-ram-container 0000000080000000-00000000800fffff (prio 0, ram): ram 0000000080100000-00000000bfffffff (prio 0, i/o): max_ram -M ast2500-evb -m 3G 0000000080000000-000000017ffffffe (prio 0, i/o): aspeed-ram-container 0000000080000000-000000013fffffff (prio 0, ram): ram [DETECTED OVERFLOW!] 0000000140000000-00000000bfffffff (prio 0, i/o): max_ram ) On top of that sdmc falls back and reports to guest "default" size, it thinks machine should have. This patch makes ram-size check actually work and changes behavior from a warning later on during machine reset to error_fatal at the moment SOC.ram-size is set so user will have to fix RAM size on CLI to start machine. It also gets out of the way mutable ram-size logic, so we could consolidate RAM allocation logic around pre-allocated hostmem backend (supplied by user or auto created by generic machine code depending on supplied -m/mem-path/mem-prealloc options. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200219160953.13771-10-imammedo@redhat.com>
2020-02-19 19:08:43 +03:00
g_free(sz);
}
static void aspeed_sdmc_initfn(Object *obj)
{
object_property_add(obj, "ram-size", "int",
aspeed_sdmc_get_ram_size, aspeed_sdmc_set_ram_size,
qom: Drop parameter @errp of object_property_add() & friends The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-05 18:29:22 +03:00
NULL, NULL);
arm/aspeed: actually check RAM size It's supposed that SOC will check if "-m" provided RAM size is valid by setting "ram-size" property and then board would read back valid (possibly corrected value) to map RAM MemoryReging with valid size. It isn't doing so, since check is called only indirectly from aspeed_sdmc_reset()->asc->compute_conf() or much later when guest writes to configuration register. So depending on "-m" value QEMU end-ups with a warning and an invalid MemoryRegion size allocated and mapped. (examples: -M ast2500-evb -m 1M 0000000080000000-000000017ffffffe (prio 0, i/o): aspeed-ram-container 0000000080000000-00000000800fffff (prio 0, ram): ram 0000000080100000-00000000bfffffff (prio 0, i/o): max_ram -M ast2500-evb -m 3G 0000000080000000-000000017ffffffe (prio 0, i/o): aspeed-ram-container 0000000080000000-000000013fffffff (prio 0, ram): ram [DETECTED OVERFLOW!] 0000000140000000-00000000bfffffff (prio 0, i/o): max_ram ) On top of that sdmc falls back and reports to guest "default" size, it thinks machine should have. This patch makes ram-size check actually work and changes behavior from a warning later on during machine reset to error_fatal at the moment SOC.ram-size is set so user will have to fix RAM size on CLI to start machine. It also gets out of the way mutable ram-size logic, so we could consolidate RAM allocation logic around pre-allocated hostmem backend (supplied by user or auto created by generic machine code depending on supplied -m/mem-path/mem-prealloc options. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200219160953.13771-10-imammedo@redhat.com>
2020-02-19 19:08:43 +03:00
}
static void aspeed_sdmc_realize(DeviceState *dev, Error **errp)
{
SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
AspeedSDMCState *s = ASPEED_SDMC(dev);
AspeedSDMCClass *asc = ASPEED_SDMC_GET_CLASS(s);
assert(asc->max_ram_size < 4 * GiB); /* 32-bit address bus */
s->max_ram_size = asc->max_ram_size;
memory_region_init_io(&s->iomem, OBJECT(s), &aspeed_sdmc_ops, s,
TYPE_ASPEED_SDMC, 0x1000);
sysbus_init_mmio(sbd, &s->iomem);
}
static const VMStateDescription vmstate_aspeed_sdmc = {
.name = "aspeed.sdmc",
.version_id = 1,
.minimum_version_id = 1,
.fields = (VMStateField[]) {
VMSTATE_UINT32_ARRAY(regs, AspeedSDMCState, ASPEED_SDMC_NR_REGS),
VMSTATE_END_OF_LIST()
}
};
static Property aspeed_sdmc_properties[] = {
DEFINE_PROP_UINT64("max-ram-size", AspeedSDMCState, max_ram_size, 0),
DEFINE_PROP_END_OF_LIST(),
};
static void aspeed_sdmc_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
dc->realize = aspeed_sdmc_realize;
dc->reset = aspeed_sdmc_reset;
dc->desc = "ASPEED SDRAM Memory Controller";
dc->vmsd = &vmstate_aspeed_sdmc;
device_class_set_props(dc, aspeed_sdmc_properties);
}
static const TypeInfo aspeed_sdmc_info = {
.name = TYPE_ASPEED_SDMC,
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(AspeedSDMCState),
arm/aspeed: actually check RAM size It's supposed that SOC will check if "-m" provided RAM size is valid by setting "ram-size" property and then board would read back valid (possibly corrected value) to map RAM MemoryReging with valid size. It isn't doing so, since check is called only indirectly from aspeed_sdmc_reset()->asc->compute_conf() or much later when guest writes to configuration register. So depending on "-m" value QEMU end-ups with a warning and an invalid MemoryRegion size allocated and mapped. (examples: -M ast2500-evb -m 1M 0000000080000000-000000017ffffffe (prio 0, i/o): aspeed-ram-container 0000000080000000-00000000800fffff (prio 0, ram): ram 0000000080100000-00000000bfffffff (prio 0, i/o): max_ram -M ast2500-evb -m 3G 0000000080000000-000000017ffffffe (prio 0, i/o): aspeed-ram-container 0000000080000000-000000013fffffff (prio 0, ram): ram [DETECTED OVERFLOW!] 0000000140000000-00000000bfffffff (prio 0, i/o): max_ram ) On top of that sdmc falls back and reports to guest "default" size, it thinks machine should have. This patch makes ram-size check actually work and changes behavior from a warning later on during machine reset to error_fatal at the moment SOC.ram-size is set so user will have to fix RAM size on CLI to start machine. It also gets out of the way mutable ram-size logic, so we could consolidate RAM allocation logic around pre-allocated hostmem backend (supplied by user or auto created by generic machine code depending on supplied -m/mem-path/mem-prealloc options. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200219160953.13771-10-imammedo@redhat.com>
2020-02-19 19:08:43 +03:00
.instance_init = aspeed_sdmc_initfn,
.class_init = aspeed_sdmc_class_init,
.class_size = sizeof(AspeedSDMCClass),
.abstract = true,
};
static int aspeed_sdmc_get_ram_bits(AspeedSDMCState *s)
{
AspeedSDMCClass *asc = ASPEED_SDMC_GET_CLASS(s);
int i;
/*
* The bitfield value encoding the RAM size is the index of the
* possible RAM size array
*/
for (i = 0; asc->valid_ram_sizes[i]; i++) {
if (s->ram_size == asc->valid_ram_sizes[i]) {
return i;
}
}
/*
* Invalid RAM sizes should have been excluded when setting the
* SoC RAM size.
*/
g_assert_not_reached();
}
static uint32_t aspeed_2400_sdmc_compute_conf(AspeedSDMCState *s, uint32_t data)
{
uint32_t fixed_conf = ASPEED_SDMC_VGA_COMPAT |
ASPEED_SDMC_DRAM_SIZE(aspeed_sdmc_get_ram_bits(s));
/* Make sure readonly bits are kept */
data &= ~ASPEED_SDMC_READONLY_MASK;
return data | fixed_conf;
}
static void aspeed_2400_sdmc_write(AspeedSDMCState *s, uint32_t reg,
uint32_t data)
{
if (reg == R_PROT) {
s->regs[reg] = (data == PROT_KEY_UNLOCK) ? PROT_UNLOCKED : PROT_SOFTLOCKED;
return;
}
if (!s->regs[R_PROT]) {
qemu_log_mask(LOG_GUEST_ERROR, "%s: SDMC is locked!\n", __func__);
return;
}
switch (reg) {
case R_CONF:
data = aspeed_2400_sdmc_compute_conf(s, data);
break;
default:
break;
}
s->regs[reg] = data;
}
arm/aspeed: actually check RAM size It's supposed that SOC will check if "-m" provided RAM size is valid by setting "ram-size" property and then board would read back valid (possibly corrected value) to map RAM MemoryReging with valid size. It isn't doing so, since check is called only indirectly from aspeed_sdmc_reset()->asc->compute_conf() or much later when guest writes to configuration register. So depending on "-m" value QEMU end-ups with a warning and an invalid MemoryRegion size allocated and mapped. (examples: -M ast2500-evb -m 1M 0000000080000000-000000017ffffffe (prio 0, i/o): aspeed-ram-container 0000000080000000-00000000800fffff (prio 0, ram): ram 0000000080100000-00000000bfffffff (prio 0, i/o): max_ram -M ast2500-evb -m 3G 0000000080000000-000000017ffffffe (prio 0, i/o): aspeed-ram-container 0000000080000000-000000013fffffff (prio 0, ram): ram [DETECTED OVERFLOW!] 0000000140000000-00000000bfffffff (prio 0, i/o): max_ram ) On top of that sdmc falls back and reports to guest "default" size, it thinks machine should have. This patch makes ram-size check actually work and changes behavior from a warning later on during machine reset to error_fatal at the moment SOC.ram-size is set so user will have to fix RAM size on CLI to start machine. It also gets out of the way mutable ram-size logic, so we could consolidate RAM allocation logic around pre-allocated hostmem backend (supplied by user or auto created by generic machine code depending on supplied -m/mem-path/mem-prealloc options. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200219160953.13771-10-imammedo@redhat.com>
2020-02-19 19:08:43 +03:00
static const uint64_t
aspeed_2400_ram_sizes[] = { 64 * MiB, 128 * MiB, 256 * MiB, 512 * MiB, 0};
static void aspeed_2400_sdmc_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
AspeedSDMCClass *asc = ASPEED_SDMC_CLASS(klass);
dc->desc = "ASPEED 2400 SDRAM Memory Controller";
asc->max_ram_size = 512 * MiB;
asc->compute_conf = aspeed_2400_sdmc_compute_conf;
asc->write = aspeed_2400_sdmc_write;
arm/aspeed: actually check RAM size It's supposed that SOC will check if "-m" provided RAM size is valid by setting "ram-size" property and then board would read back valid (possibly corrected value) to map RAM MemoryReging with valid size. It isn't doing so, since check is called only indirectly from aspeed_sdmc_reset()->asc->compute_conf() or much later when guest writes to configuration register. So depending on "-m" value QEMU end-ups with a warning and an invalid MemoryRegion size allocated and mapped. (examples: -M ast2500-evb -m 1M 0000000080000000-000000017ffffffe (prio 0, i/o): aspeed-ram-container 0000000080000000-00000000800fffff (prio 0, ram): ram 0000000080100000-00000000bfffffff (prio 0, i/o): max_ram -M ast2500-evb -m 3G 0000000080000000-000000017ffffffe (prio 0, i/o): aspeed-ram-container 0000000080000000-000000013fffffff (prio 0, ram): ram [DETECTED OVERFLOW!] 0000000140000000-00000000bfffffff (prio 0, i/o): max_ram ) On top of that sdmc falls back and reports to guest "default" size, it thinks machine should have. This patch makes ram-size check actually work and changes behavior from a warning later on during machine reset to error_fatal at the moment SOC.ram-size is set so user will have to fix RAM size on CLI to start machine. It also gets out of the way mutable ram-size logic, so we could consolidate RAM allocation logic around pre-allocated hostmem backend (supplied by user or auto created by generic machine code depending on supplied -m/mem-path/mem-prealloc options. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200219160953.13771-10-imammedo@redhat.com>
2020-02-19 19:08:43 +03:00
asc->valid_ram_sizes = aspeed_2400_ram_sizes;
}
static const TypeInfo aspeed_2400_sdmc_info = {
.name = TYPE_ASPEED_2400_SDMC,
.parent = TYPE_ASPEED_SDMC,
.class_init = aspeed_2400_sdmc_class_init,
};
static uint32_t aspeed_2500_sdmc_compute_conf(AspeedSDMCState *s, uint32_t data)
{
uint32_t fixed_conf = ASPEED_SDMC_HW_VERSION(1) |
ASPEED_SDMC_VGA_APERTURE(ASPEED_SDMC_VGA_64MB) |
ASPEED_SDMC_CACHE_INITIAL_DONE |
ASPEED_SDMC_DRAM_SIZE(aspeed_sdmc_get_ram_bits(s));
/* Make sure readonly bits are kept */
data &= ~ASPEED_SDMC_AST2500_READONLY_MASK;
return data | fixed_conf;
}
static void aspeed_2500_sdmc_write(AspeedSDMCState *s, uint32_t reg,
uint32_t data)
{
if (reg == R_PROT) {
s->regs[reg] = (data == PROT_KEY_UNLOCK) ? PROT_UNLOCKED : PROT_SOFTLOCKED;
return;
}
if (!s->regs[R_PROT]) {
qemu_log_mask(LOG_GUEST_ERROR, "%s: SDMC is locked!\n", __func__);
return;
}
switch (reg) {
case R_CONF:
data = aspeed_2500_sdmc_compute_conf(s, data);
break;
case R_STATUS1:
/* Will never return 'busy' */
data &= ~PHY_BUSY_STATE;
break;
case R_ECC_TEST_CTRL:
/* Always done, always happy */
data |= ECC_TEST_FINISHED;
data &= ~ECC_TEST_FAIL;
break;
default:
break;
}
s->regs[reg] = data;
}
arm/aspeed: actually check RAM size It's supposed that SOC will check if "-m" provided RAM size is valid by setting "ram-size" property and then board would read back valid (possibly corrected value) to map RAM MemoryReging with valid size. It isn't doing so, since check is called only indirectly from aspeed_sdmc_reset()->asc->compute_conf() or much later when guest writes to configuration register. So depending on "-m" value QEMU end-ups with a warning and an invalid MemoryRegion size allocated and mapped. (examples: -M ast2500-evb -m 1M 0000000080000000-000000017ffffffe (prio 0, i/o): aspeed-ram-container 0000000080000000-00000000800fffff (prio 0, ram): ram 0000000080100000-00000000bfffffff (prio 0, i/o): max_ram -M ast2500-evb -m 3G 0000000080000000-000000017ffffffe (prio 0, i/o): aspeed-ram-container 0000000080000000-000000013fffffff (prio 0, ram): ram [DETECTED OVERFLOW!] 0000000140000000-00000000bfffffff (prio 0, i/o): max_ram ) On top of that sdmc falls back and reports to guest "default" size, it thinks machine should have. This patch makes ram-size check actually work and changes behavior from a warning later on during machine reset to error_fatal at the moment SOC.ram-size is set so user will have to fix RAM size on CLI to start machine. It also gets out of the way mutable ram-size logic, so we could consolidate RAM allocation logic around pre-allocated hostmem backend (supplied by user or auto created by generic machine code depending on supplied -m/mem-path/mem-prealloc options. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200219160953.13771-10-imammedo@redhat.com>
2020-02-19 19:08:43 +03:00
static const uint64_t
aspeed_2500_ram_sizes[] = { 128 * MiB, 256 * MiB, 512 * MiB, 1024 * MiB, 0};
static void aspeed_2500_sdmc_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
AspeedSDMCClass *asc = ASPEED_SDMC_CLASS(klass);
dc->desc = "ASPEED 2500 SDRAM Memory Controller";
asc->max_ram_size = 1 * GiB;
asc->compute_conf = aspeed_2500_sdmc_compute_conf;
asc->write = aspeed_2500_sdmc_write;
arm/aspeed: actually check RAM size It's supposed that SOC will check if "-m" provided RAM size is valid by setting "ram-size" property and then board would read back valid (possibly corrected value) to map RAM MemoryReging with valid size. It isn't doing so, since check is called only indirectly from aspeed_sdmc_reset()->asc->compute_conf() or much later when guest writes to configuration register. So depending on "-m" value QEMU end-ups with a warning and an invalid MemoryRegion size allocated and mapped. (examples: -M ast2500-evb -m 1M 0000000080000000-000000017ffffffe (prio 0, i/o): aspeed-ram-container 0000000080000000-00000000800fffff (prio 0, ram): ram 0000000080100000-00000000bfffffff (prio 0, i/o): max_ram -M ast2500-evb -m 3G 0000000080000000-000000017ffffffe (prio 0, i/o): aspeed-ram-container 0000000080000000-000000013fffffff (prio 0, ram): ram [DETECTED OVERFLOW!] 0000000140000000-00000000bfffffff (prio 0, i/o): max_ram ) On top of that sdmc falls back and reports to guest "default" size, it thinks machine should have. This patch makes ram-size check actually work and changes behavior from a warning later on during machine reset to error_fatal at the moment SOC.ram-size is set so user will have to fix RAM size on CLI to start machine. It also gets out of the way mutable ram-size logic, so we could consolidate RAM allocation logic around pre-allocated hostmem backend (supplied by user or auto created by generic machine code depending on supplied -m/mem-path/mem-prealloc options. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200219160953.13771-10-imammedo@redhat.com>
2020-02-19 19:08:43 +03:00
asc->valid_ram_sizes = aspeed_2500_ram_sizes;
}
static const TypeInfo aspeed_2500_sdmc_info = {
.name = TYPE_ASPEED_2500_SDMC,
.parent = TYPE_ASPEED_SDMC,
.class_init = aspeed_2500_sdmc_class_init,
};
static uint32_t aspeed_2600_sdmc_compute_conf(AspeedSDMCState *s, uint32_t data)
{
uint32_t fixed_conf = ASPEED_SDMC_HW_VERSION(3) |
ASPEED_SDMC_VGA_APERTURE(ASPEED_SDMC_VGA_64MB) |
ASPEED_SDMC_DRAM_SIZE(aspeed_sdmc_get_ram_bits(s));
/* Make sure readonly bits are kept (use ast2500 mask) */
data &= ~ASPEED_SDMC_AST2500_READONLY_MASK;
return data | fixed_conf;
}
static void aspeed_2600_sdmc_write(AspeedSDMCState *s, uint32_t reg,
uint32_t data)
{
/* Unprotected registers */
switch (reg) {
case R_ISR:
case R_MCR6C:
case R_TEST_START_LEN:
case R_TEST_FAIL_DQ:
case R_TEST_INIT_VAL:
case R_DRAM_SW:
case R_DRAM_TIME:
case R_ECC_ERR_INJECT:
s->regs[reg] = data;
return;
}
if (s->regs[R_PROT] == PROT_HARDLOCKED) {
qemu_log_mask(LOG_GUEST_ERROR, "%s: SDMC is locked until system reset!\n",
__func__);
return;
}
if (reg != R_PROT && s->regs[R_PROT] == PROT_SOFTLOCKED) {
qemu_log_mask(LOG_GUEST_ERROR,
"%s: SDMC is locked! (write to MCR%02x blocked)\n",
__func__, reg * 4);
return;
}
switch (reg) {
case R_PROT:
if (data == PROT_KEY_UNLOCK) {
data = PROT_UNLOCKED;
} else if (data == PROT_KEY_HARDLOCK) {
data = PROT_HARDLOCKED;
} else {
data = PROT_SOFTLOCKED;
}
break;
case R_CONF:
data = aspeed_2600_sdmc_compute_conf(s, data);
break;
case R_STATUS1:
/* Will never return 'busy'. 'lock status' is always set */
data &= ~PHY_BUSY_STATE;
data |= PHY_PLL_LOCK_STATUS;
break;
case R_ECC_TEST_CTRL:
/* Always done, always happy */
data |= ECC_TEST_FINISHED;
data &= ~ECC_TEST_FAIL;
break;
default:
break;
}
s->regs[reg] = data;
}
arm/aspeed: actually check RAM size It's supposed that SOC will check if "-m" provided RAM size is valid by setting "ram-size" property and then board would read back valid (possibly corrected value) to map RAM MemoryReging with valid size. It isn't doing so, since check is called only indirectly from aspeed_sdmc_reset()->asc->compute_conf() or much later when guest writes to configuration register. So depending on "-m" value QEMU end-ups with a warning and an invalid MemoryRegion size allocated and mapped. (examples: -M ast2500-evb -m 1M 0000000080000000-000000017ffffffe (prio 0, i/o): aspeed-ram-container 0000000080000000-00000000800fffff (prio 0, ram): ram 0000000080100000-00000000bfffffff (prio 0, i/o): max_ram -M ast2500-evb -m 3G 0000000080000000-000000017ffffffe (prio 0, i/o): aspeed-ram-container 0000000080000000-000000013fffffff (prio 0, ram): ram [DETECTED OVERFLOW!] 0000000140000000-00000000bfffffff (prio 0, i/o): max_ram ) On top of that sdmc falls back and reports to guest "default" size, it thinks machine should have. This patch makes ram-size check actually work and changes behavior from a warning later on during machine reset to error_fatal at the moment SOC.ram-size is set so user will have to fix RAM size on CLI to start machine. It also gets out of the way mutable ram-size logic, so we could consolidate RAM allocation logic around pre-allocated hostmem backend (supplied by user or auto created by generic machine code depending on supplied -m/mem-path/mem-prealloc options. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200219160953.13771-10-imammedo@redhat.com>
2020-02-19 19:08:43 +03:00
static const uint64_t
aspeed_2600_ram_sizes[] = { 256 * MiB, 512 * MiB, 1024 * MiB, 2048 * MiB, 0};
static void aspeed_2600_sdmc_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
AspeedSDMCClass *asc = ASPEED_SDMC_CLASS(klass);
dc->desc = "ASPEED 2600 SDRAM Memory Controller";
asc->max_ram_size = 2 * GiB;
asc->compute_conf = aspeed_2600_sdmc_compute_conf;
asc->write = aspeed_2600_sdmc_write;
arm/aspeed: actually check RAM size It's supposed that SOC will check if "-m" provided RAM size is valid by setting "ram-size" property and then board would read back valid (possibly corrected value) to map RAM MemoryReging with valid size. It isn't doing so, since check is called only indirectly from aspeed_sdmc_reset()->asc->compute_conf() or much later when guest writes to configuration register. So depending on "-m" value QEMU end-ups with a warning and an invalid MemoryRegion size allocated and mapped. (examples: -M ast2500-evb -m 1M 0000000080000000-000000017ffffffe (prio 0, i/o): aspeed-ram-container 0000000080000000-00000000800fffff (prio 0, ram): ram 0000000080100000-00000000bfffffff (prio 0, i/o): max_ram -M ast2500-evb -m 3G 0000000080000000-000000017ffffffe (prio 0, i/o): aspeed-ram-container 0000000080000000-000000013fffffff (prio 0, ram): ram [DETECTED OVERFLOW!] 0000000140000000-00000000bfffffff (prio 0, i/o): max_ram ) On top of that sdmc falls back and reports to guest "default" size, it thinks machine should have. This patch makes ram-size check actually work and changes behavior from a warning later on during machine reset to error_fatal at the moment SOC.ram-size is set so user will have to fix RAM size on CLI to start machine. It also gets out of the way mutable ram-size logic, so we could consolidate RAM allocation logic around pre-allocated hostmem backend (supplied by user or auto created by generic machine code depending on supplied -m/mem-path/mem-prealloc options. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200219160953.13771-10-imammedo@redhat.com>
2020-02-19 19:08:43 +03:00
asc->valid_ram_sizes = aspeed_2600_ram_sizes;
}
static const TypeInfo aspeed_2600_sdmc_info = {
.name = TYPE_ASPEED_2600_SDMC,
.parent = TYPE_ASPEED_SDMC,
.class_init = aspeed_2600_sdmc_class_init,
};
static void aspeed_sdmc_register_types(void)
{
type_register_static(&aspeed_sdmc_info);
type_register_static(&aspeed_2400_sdmc_info);
type_register_static(&aspeed_2500_sdmc_info);
type_register_static(&aspeed_2600_sdmc_info);
}
type_init(aspeed_sdmc_register_types);