mirrors/qemu
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
d307c28ca9
qemu/tests/qemu-iotests/051.pc.out

526 lines
56 KiB
Plaintext
Raw Normal View History

qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
QA output created by 051
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/t.IMGFMT.base
=== Unknown option ===
qemu-iotests: s390x: fix test 051 Replace the remaining "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output. "if=ide, if=floppy, if=scsi" are not supported by s390x, so these test cases are not executed for s390x platform. Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1451885360-20236-2-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-01-04 08:29:20 +03:00
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=,if=none,id=drive0
block: Drop BB name from bad option error The information which BB is concerned does not seem useful enough to justify its existence in most other place (which may be related to qemu printing the -drive parameter in question anyway, and for blockdev-add the attribution is naturally unambiguous). Furthermore, as of a future patch, bdrv_get_device_name(bs) will always return the empty string before bdrv_open_inherit() returns. Therefore, just dropping that information seems to be the best course of action. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-16 21:54:34 +03:00
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=,if=none,id=drive0: Block format 'qcow2' does not support the option 'unknown_opt'
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
qemu-iotests: s390x: fix test 051 Replace the remaining "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output. "if=ide, if=floppy, if=scsi" are not supported by s390x, so these test cases are not executed for s390x platform. Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1451885360-20236-2-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-01-04 08:29:20 +03:00
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=on,if=none,id=drive0
block: Drop BB name from bad option error The information which BB is concerned does not seem useful enough to justify its existence in most other place (which may be related to qemu printing the -drive parameter in question anyway, and for blockdev-add the attribution is naturally unambiguous). Furthermore, as of a future patch, bdrv_get_device_name(bs) will always return the empty string before bdrv_open_inherit() returns. Therefore, just dropping that information seems to be the best course of action. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-16 21:54:34 +03:00
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=on,if=none,id=drive0: Block format 'qcow2' does not support the option 'unknown_opt'
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
qemu-iotests: s390x: fix test 051 Replace the remaining "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output. "if=ide, if=floppy, if=scsi" are not supported by s390x, so these test cases are not executed for s390x platform. Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1451885360-20236-2-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-01-04 08:29:20 +03:00
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=1234,if=none,id=drive0
block: Drop BB name from bad option error The information which BB is concerned does not seem useful enough to justify its existence in most other place (which may be related to qemu printing the -drive parameter in question anyway, and for blockdev-add the attribution is naturally unambiguous). Furthermore, as of a future patch, bdrv_get_device_name(bs) will always return the empty string before bdrv_open_inherit() returns. Therefore, just dropping that information seems to be the best course of action. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-16 21:54:34 +03:00
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=1234,if=none,id=drive0: Block format 'qcow2' does not support the option 'unknown_opt'
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
qemu-iotests: s390x: fix test 051 Replace the remaining "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output. "if=ide, if=floppy, if=scsi" are not supported by s390x, so these test cases are not executed for s390x platform. Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1451885360-20236-2-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-01-04 08:29:20 +03:00
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=foo,if=none,id=drive0
block: Drop BB name from bad option error The information which BB is concerned does not seem useful enough to justify its existence in most other place (which may be related to qemu printing the -drive parameter in question anyway, and for blockdev-add the attribution is naturally unambiguous). Furthermore, as of a future patch, bdrv_get_device_name(bs) will always return the empty string before bdrv_open_inherit() returns. Therefore, just dropping that information seems to be the best course of action. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-16 21:54:34 +03:00
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=foo,if=none,id=drive0: Block format 'qcow2' does not support the option 'unknown_opt'
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
=== Unknown protocol option ===
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=: Block protocol 'file' doesn't support the option 'unknown_opt'
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=on
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=on: Block protocol 'file' doesn't support the option 'unknown_opt'
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=1234
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=1234: Block protocol 'file' doesn't support the option 'unknown_opt'
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=foo
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=foo: Block protocol 'file' doesn't support the option 'unknown_opt'
=== Invalid format ===
Testing: -drive file=TEST_DIR/t.qcow2,format=foo
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=foo: Unknown driver 'foo'
Testing: -drive file=TEST_DIR/t.qcow2,driver=foo
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,driver=foo: Unknown driver 'foo'
Testing: -drive file=TEST_DIR/t.qcow2,driver=raw,format=qcow2
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,driver=raw,format=qcow2: Cannot specify both 'driver' and 'format'
Testing: -drive file=TEST_DIR/t.qcow2,driver=qcow2,format=qcow2
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,driver=qcow2,format=qcow2: Cannot specify both 'driver' and 'format'
=== Device without drive ===
Testing: -device virtio-scsi-pci -device scsi-hd
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) QEMU_PROG: -device scsi-hd: drive property not set
=== Overriding backing file ===
qemu-iotests: s390x: fix test 051 Replace the remaining "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output. "if=ide, if=floppy, if=scsi" are not supported by s390x, so these test cases are not executed for s390x platform. Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1451885360-20236-2-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-01-04 08:29:20 +03:00
Testing: -drive file=TEST_DIR/t.qcow2,driver=qcow2,backing.file.filename=TEST_DIR/t.qcow2.orig,if=none,id=drive0 -nodefaults
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo block
qemu-iotests: s390x: fix test 051 Replace the remaining "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output. "if=ide, if=floppy, if=scsi" are not supported by s390x, so these test cases are not executed for s390x platform. Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1451885360-20236-2-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-01-04 08:29:20 +03:00
drive0 (NODE_NAME): TEST_DIR/t.qcow2 (qcow2)
Removable device: not locked, tray closed
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
Cache mode: writeback
Backing file: TEST_DIR/t.qcow2.orig (chain depth: 1)
(qemu) qququiquit
Testing: -drive file=TEST_DIR/t.qcow2,driver=raw,backing.file.filename=TEST_DIR/t.qcow2.orig
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,driver=raw,backing.file.filename=TEST_DIR/t.qcow2.orig: Driver doesn't support backing files
Testing: -drive file=TEST_DIR/t.qcow2,file.backing.driver=file,file.backing.filename=TEST_DIR/t.qcow2.orig
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,file.backing.driver=file,file.backing.filename=TEST_DIR/t.qcow2.orig: Driver doesn't support backing files
Testing: -drive file=TEST_DIR/t.qcow2,file.backing.driver=qcow2,file.backing.file.filename=TEST_DIR/t.qcow2.orig
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,file.backing.driver=qcow2,file.backing.file.filename=TEST_DIR/t.qcow2.orig: Driver doesn't support backing files
=== Enable and disable lazy refcounting on the command line, plus some invalid values ===
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=on
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qququiquit
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=off
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qququiquit
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=: Parameter 'lazy-refcounts' expects 'on' or 'off'
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=42
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=42: Parameter 'lazy-refcounts' expects 'on' or 'off'
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=foo
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=foo: Parameter 'lazy-refcounts' expects 'on' or 'off'
=== With version 2 images enabling lazy refcounts must fail ===
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=on
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=on: Lazy refcounts require a qcow2 image with at least qemu 1.1 compatibility level
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=off
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qququiquit
=== No medium ===
Testing: -drive if=floppy
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qququiquit
Testing: -drive if=ide,media=cdrom
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qququiquit
Testing: -drive if=scsi,media=cdrom
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qququiquit
Testing: -drive if=ide
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) QEMU_PROG: Device needs media, but drive is empty
QEMU_PROG: Initialization of device ide-hd failed: Device initialization failed.
Testing: -drive if=scsi
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) QEMU_PROG: Initialization of device lsi53c895a failed: Device needs media, but drive is empty
qemu-iotests: s390x: fix test 051 Replace the remaining "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output. "if=ide, if=floppy, if=scsi" are not supported by s390x, so these test cases are not executed for s390x platform. Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1451885360-20236-2-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-01-04 08:29:20 +03:00
Testing: -drive if=virtio
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) QEMU_PROG: -drive if=virtio: Device needs media, but drive is empty
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
Testing: -drive if=none,id=disk -device ide-cd,drive=disk
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qququiquit
Testing: -drive if=none,id=disk -device lsi53c895a -device scsi-cd,drive=disk
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qququiquit
Testing: -drive if=none,id=disk -device ide-drive,drive=disk
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) QEMU_PROG: -device ide-drive,drive=disk: Device needs media, but drive is empty
QEMU_PROG: -device ide-drive,drive=disk: Device initialization failed.
Testing: -drive if=none,id=disk -device ide-hd,drive=disk
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) QEMU_PROG: -device ide-hd,drive=disk: Device needs media, but drive is empty
QEMU_PROG: -device ide-hd,drive=disk: Device initialization failed.
Testing: -drive if=none,id=disk -device lsi53c895a -device scsi-disk,drive=disk
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) QEMU_PROG: -device scsi-disk,drive=disk: Device needs media, but drive is empty
Testing: -drive if=none,id=disk -device lsi53c895a -device scsi-hd,drive=disk
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) QEMU_PROG: -device scsi-hd,drive=disk: Device needs media, but drive is empty
=== Read-only ===
Testing: -drive file=TEST_DIR/t.qcow2,if=floppy,readonly=on
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qququiquit
Testing: -drive file=TEST_DIR/t.qcow2,if=ide,media=cdrom,readonly=on
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qququiquit
Testing: -drive file=TEST_DIR/t.qcow2,if=scsi,media=cdrom,readonly=on
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qququiquit
Testing: -drive file=TEST_DIR/t.qcow2,if=ide,readonly=on
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) QEMU_PROG: Can't use a read-only drive
QEMU_PROG: Initialization of device ide-hd failed: Device initialization failed.
qemu-iotests: s390x: fix test 051 Replace the remaining "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output. "if=ide, if=floppy, if=scsi" are not supported by s390x, so these test cases are not executed for s390x platform. Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1451885360-20236-2-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-01-04 08:29:20 +03:00
Testing: -drive file=TEST_DIR/t.qcow2,if=scsi,readonly=on
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qququiquit
qemu-iotests: s390x: fix test 051 Replace the remaining "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output. "if=ide, if=floppy, if=scsi" are not supported by s390x, so these test cases are not executed for s390x platform. Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1451885360-20236-2-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-01-04 08:29:20 +03:00
Testing: -drive file=TEST_DIR/t.qcow2,if=virtio,readonly=on
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qququiquit
Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device ide-cd,drive=disk
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qququiquit
Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device lsi53c895a -device scsi-cd,drive=disk
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qququiquit
Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device ide-drive,drive=disk
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) QEMU_PROG: -device ide-drive,drive=disk: Can't use a read-only drive
QEMU_PROG: -device ide-drive,drive=disk: Device initialization failed.
Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device ide-hd,drive=disk
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) QEMU_PROG: -device ide-hd,drive=disk: Can't use a read-only drive
QEMU_PROG: -device ide-hd,drive=disk: Device initialization failed.
Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device lsi53c895a -device scsi-disk,drive=disk
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qququiquit
Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device lsi53c895a -device scsi-hd,drive=disk
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qququiquit
=== Cache modes ===
Testing: -drive driver=null-co,cache=none
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qququiquit
Testing: -drive driver=null-co,cache=directsync
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qququiquit
Testing: -drive driver=null-co,cache=writeback
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qququiquit
Testing: -drive driver=null-co,cache=writethrough
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qququiquit
Testing: -drive driver=null-co,cache=unsafe
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qququiquit
Testing: -drive driver=null-co,cache=invalid_value
QEMU_PROG: -drive driver=null-co,cache=invalid_value: invalid cache option
block: Remove BDRV_O_CACHE_WB The previous patches have successively made blk->enable_write_cache the true source for the information whether a writethrough mode must be implemented. The corresponding BDRV_O_CACHE_WB is only useless baggage we're carrying around, so now's the time to remove it. At the same time, we remove the 'cache.writeback' option parsing on the BDS level as the only effect was setting the BDRV_O_CACHE_WB flag. This change requires test cases that explicitly enabled the option to drop it. Other than that and the change of the error message when writethrough is enabled on the BDS level (from "Can't set writethrough mode" to "doesn't support the option"), there should be no change in behaviour. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-03-18 19:46:45 +03:00
Testing: -drive file=TEST_DIR/t.qcow2,cache=writeback,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=drive0 -nodefaults
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo block
qemu-iotests: s390x: fix test 051 Replace the remaining "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output. "if=ide, if=floppy, if=scsi" are not supported by s390x, so these test cases are not executed for s390x platform. Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1451885360-20236-2-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-01-04 08:29:20 +03:00
drive0 (NODE_NAME): TEST_DIR/t.qcow2 (qcow2)
Removable device: not locked, tray closed
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
Cache mode: writeback
Backing file: TEST_DIR/t.qcow2.base (chain depth: 1)
(qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo blockinfo block info block finfo block fiinfo block filinfo block file
file: TEST_DIR/t.qcow2 (file)
Cache mode: writeback
(qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo blockinfo block info block binfo block bainfo block bacinfo block backinfo block backiinfo block backininfo block backing
backing: TEST_DIR/t.qcow2.base (qcow2, read-only)
Cache mode: writeback, ignore flushes
(qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo blockinfo block info block binfo block bainfo block bacinfo block backinfo block backiinfo block backininfo block backinginfo block backing-info block backing-finfo block backing-fiinfo block backing-filinfo block backing-file
backing-file: TEST_DIR/t.qcow2.base (file, read-only)
Cache mode: writeback, ignore flushes
(qemu) qququiquit
block: Remove BDRV_O_CACHE_WB The previous patches have successively made blk->enable_write_cache the true source for the information whether a writethrough mode must be implemented. The corresponding BDRV_O_CACHE_WB is only useless baggage we're carrying around, so now's the time to remove it. At the same time, we remove the 'cache.writeback' option parsing on the BDS level as the only effect was setting the BDRV_O_CACHE_WB flag. This change requires test cases that explicitly enabled the option to drop it. Other than that and the change of the error message when writethrough is enabled on the BDS level (from "Can't set writethrough mode" to "doesn't support the option"), there should be no change in behaviour. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-03-18 19:46:45 +03:00
Testing: -drive file=TEST_DIR/t.qcow2,cache=writethrough,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=drive0 -nodefaults
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo block
qemu-iotests: s390x: fix test 051 Replace the remaining "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output. "if=ide, if=floppy, if=scsi" are not supported by s390x, so these test cases are not executed for s390x platform. Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1451885360-20236-2-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-01-04 08:29:20 +03:00
drive0 (NODE_NAME): TEST_DIR/t.qcow2 (qcow2)
Removable device: not locked, tray closed
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
Cache mode: writethrough
Backing file: TEST_DIR/t.qcow2.base (chain depth: 1)
(qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo blockinfo block info block finfo block fiinfo block filinfo block file
file: TEST_DIR/t.qcow2 (file)
Cache mode: writeback
(qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo blockinfo block info block binfo block bainfo block bacinfo block backinfo block backiinfo block backininfo block backing
backing: TEST_DIR/t.qcow2.base (qcow2, read-only)
Cache mode: writeback, ignore flushes
(qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo blockinfo block info block binfo block bainfo block bacinfo block backinfo block backiinfo block backininfo block backinginfo block backing-info block backing-finfo block backing-fiinfo block backing-filinfo block backing-file
backing-file: TEST_DIR/t.qcow2.base (file, read-only)
Cache mode: writeback, ignore flushes
(qemu) qququiquit
block: Remove BDRV_O_CACHE_WB The previous patches have successively made blk->enable_write_cache the true source for the information whether a writethrough mode must be implemented. The corresponding BDRV_O_CACHE_WB is only useless baggage we're carrying around, so now's the time to remove it. At the same time, we remove the 'cache.writeback' option parsing on the BDS level as the only effect was setting the BDRV_O_CACHE_WB flag. This change requires test cases that explicitly enabled the option to drop it. Other than that and the change of the error message when writethrough is enabled on the BDS level (from "Can't set writethrough mode" to "doesn't support the option"), there should be no change in behaviour. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-03-18 19:46:45 +03:00
Testing: -drive file=TEST_DIR/t.qcow2,cache=unsafe,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=drive0 -nodefaults
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo block
qemu-iotests: s390x: fix test 051 Replace the remaining "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output. "if=ide, if=floppy, if=scsi" are not supported by s390x, so these test cases are not executed for s390x platform. Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1451885360-20236-2-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-01-04 08:29:20 +03:00
drive0 (NODE_NAME): TEST_DIR/t.qcow2 (qcow2)
Removable device: not locked, tray closed
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
Cache mode: writeback, ignore flushes
Backing file: TEST_DIR/t.qcow2.base (chain depth: 1)
(qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo blockinfo block info block finfo block fiinfo block filinfo block file
file: TEST_DIR/t.qcow2 (file)
Cache mode: writeback, ignore flushes
(qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo blockinfo block info block binfo block bainfo block bacinfo block backinfo block backiinfo block backininfo block backing
backing: TEST_DIR/t.qcow2.base (qcow2, read-only)
Cache mode: writeback, ignore flushes
(qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo blockinfo block info block binfo block bainfo block bacinfo block backinfo block backiinfo block backininfo block backinginfo block backing-info block backing-finfo block backing-fiinfo block backing-filinfo block backing-file
backing-file: TEST_DIR/t.qcow2.base (file, read-only)
Cache mode: writeback, ignore flushes
(qemu) qququiquit
block: Remove BDRV_O_CACHE_WB The previous patches have successively made blk->enable_write_cache the true source for the information whether a writethrough mode must be implemented. The corresponding BDRV_O_CACHE_WB is only useless baggage we're carrying around, so now's the time to remove it. At the same time, we remove the 'cache.writeback' option parsing on the BDS level as the only effect was setting the BDRV_O_CACHE_WB flag. This change requires test cases that explicitly enabled the option to drop it. Other than that and the change of the error message when writethrough is enabled on the BDS level (from "Can't set writethrough mode" to "doesn't support the option"), there should be no change in behaviour. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-03-18 19:46:45 +03:00
Testing: -drive file=TEST_DIR/t.qcow2,cache=invalid_value,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=drive0 -nodefaults
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,cache=invalid_value,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=drive0: invalid cache option
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
=== Specifying the protocol layer ===
Testing: -drive file=TEST_DIR/t.qcow2,file.driver=file
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qququiquit
=== Leaving out required options ===
Testing: -drive driver=file
QEMU_PROG: -drive driver=file: The 'file' block driver requires a file name
Testing: -drive driver=nbd
block/nbd: Accept SocketAddress Add a new option "server" to the NBD block driver which accepts a SocketAddress. "path", "host" and "port" are still supported as legacy options and are mapped to their corresponding SocketAddress representation. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-10-25 16:11:34 +03:00
QEMU_PROG: -drive driver=nbd: NBD server address missing
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
Testing: -drive driver=raw
QEMU_PROG: -drive driver=raw: Can't use 'raw' as a block driver for the protocol level
Testing: -drive file.driver=file
QEMU_PROG: -drive file.driver=file: The 'file' block driver requires a file name
Testing: -drive file.driver=nbd
block/nbd: Accept SocketAddress Add a new option "server" to the NBD block driver which accepts a SocketAddress. "path", "host" and "port" are still supported as legacy options and are mapped to their corresponding SocketAddress representation. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-10-25 16:11:34 +03:00
QEMU_PROG: -drive file.driver=nbd: NBD server address missing
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
Testing: -drive file.driver=raw
QEMU_PROG: -drive file.driver=raw: Can't use 'raw' as a block driver for the protocol level
Testing: -drive foo=bar
QEMU_PROG: -drive foo=bar: Must specify either driver or file
=== Specifying both an option and its legacy alias ===
Testing: -drive file=TEST_DIR/t.qcow2,iops=1234,throttling.iops-total=5678
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops=1234,throttling.iops-total=5678: 'throttling.iops-total' and its alias 'iops' can't be used at the same time
Testing: -drive file=TEST_DIR/t.qcow2,iops_rd=1234,throttling.iops-read=5678
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops_rd=1234,throttling.iops-read=5678: 'throttling.iops-read' and its alias 'iops_rd' can't be used at the same time
Testing: -drive file=TEST_DIR/t.qcow2,iops_wr=1234,throttling.iops-write=5678
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops_wr=1234,throttling.iops-write=5678: 'throttling.iops-write' and its alias 'iops_wr' can't be used at the same time
Testing: -drive file=TEST_DIR/t.qcow2,bps=1234,throttling.bps-total=5678
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps=1234,throttling.bps-total=5678: 'throttling.bps-total' and its alias 'bps' can't be used at the same time
Testing: -drive file=TEST_DIR/t.qcow2,bps_rd=1234,throttling.bps-read=5678
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_rd=1234,throttling.bps-read=5678: 'throttling.bps-read' and its alias 'bps_rd' can't be used at the same time
Testing: -drive file=TEST_DIR/t.qcow2,bps_wr=1234,throttling.bps-write=5678
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_wr=1234,throttling.bps-write=5678: 'throttling.bps-write' and its alias 'bps_wr' can't be used at the same time
Testing: -drive file=TEST_DIR/t.qcow2,iops_max=1234,throttling.iops-total-max=5678
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops_max=1234,throttling.iops-total-max=5678: 'throttling.iops-total-max' and its alias 'iops_max' can't be used at the same time
Testing: -drive file=TEST_DIR/t.qcow2,iops_rd_max=1234,throttling.iops-read-max=5678
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops_rd_max=1234,throttling.iops-read-max=5678: 'throttling.iops-read-max' and its alias 'iops_rd_max' can't be used at the same time
Testing: -drive file=TEST_DIR/t.qcow2,iops_wr_max=1234,throttling.iops-write-max=5678
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops_wr_max=1234,throttling.iops-write-max=5678: 'throttling.iops-write-max' and its alias 'iops_wr_max' can't be used at the same time
Testing: -drive file=TEST_DIR/t.qcow2,bps_max=1234,throttling.bps-total-max=5678
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_max=1234,throttling.bps-total-max=5678: 'throttling.bps-total-max' and its alias 'bps_max' can't be used at the same time
Testing: -drive file=TEST_DIR/t.qcow2,bps_rd_max=1234,throttling.bps-read-max=5678
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_rd_max=1234,throttling.bps-read-max=5678: 'throttling.bps-read-max' and its alias 'bps_rd_max' can't be used at the same time
Testing: -drive file=TEST_DIR/t.qcow2,bps_wr_max=1234,throttling.bps-write-max=5678
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_wr_max=1234,throttling.bps-write-max=5678: 'throttling.bps-write-max' and its alias 'bps_wr_max' can't be used at the same time
Testing: -drive file=TEST_DIR/t.qcow2,iops_size=1234,throttling.iops-size=5678
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops_size=1234,throttling.iops-size=5678: 'throttling.iops-size' and its alias 'iops_size' can't be used at the same time
Testing: -drive file=TEST_DIR/t.qcow2,readonly=on,read-only=off
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,readonly=on,read-only=off: 'read-only' and its alias 'readonly' can't be used at the same time
iotests: Test that throttle values ranges Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-01-20 07:21:21 +03:00
=== Catching negative/large throttling values ===
Testing: -drive file=TEST_DIR/t.qcow2,iops=-1
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops=-1: bps/iops/max values must be within [0, 1000000000000000]
Testing: -drive file=TEST_DIR/t.qcow2,bps=-2
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps=-2: bps/iops/max values must be within [0, 1000000000000000]
Testing: -drive file=TEST_DIR/t.qcow2,bps_rd=-3
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_rd=-3: bps/iops/max values must be within [0, 1000000000000000]
Testing: -drive file=TEST_DIR/t.qcow2,bps_rd_max=-3
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_rd_max=-3: bps/iops/max values must be within [0, 1000000000000000]
Testing: -drive file=TEST_DIR/t.qcow2,throttling.iops-total=-4
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,throttling.iops-total=-4: bps/iops/max values must be within [0, 1000000000000000]
Testing: -drive file=TEST_DIR/t.qcow2,throttling.bps-total=-5
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,throttling.bps-total=-5: bps/iops/max values must be within [0, 1000000000000000]
Testing: -drive file=TEST_DIR/t.qcow2,bps=0
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qququiquit
Testing: -drive file=TEST_DIR/t.qcow2,bps=1
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qququiquit
Testing: -drive file=TEST_DIR/t.qcow2,bps=1000000000000000
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qququiquit
Testing: -drive file=TEST_DIR/t.qcow2,bps=1000000000000001
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps=1000000000000001: bps/iops/max values must be within [0, 1000000000000000]
Testing: -drive file=TEST_DIR/t.qcow2,bps=9999999999999999
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps=9999999999999999: bps/iops/max values must be within [0, 1000000000000000]
qemu-iotests: s390x: fix test 051 The tests for ide device should only be tested for the pc platform. Set device_id to "drive0", and replace every "-drive file..." by "-drive file=...,if=none,id=$device_id", then x86 and s390x can get the common output in the test of "Snapshot mode". Warning message expected for s390x when drive without device. A x86 platform specific output file is also needed. Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-03 13:01:30 +03:00
=== Parsing protocol from file name ===
Testing: -hda foo:bar
QEMU_PROG: -hda foo:bar: Unknown protocol 'foo'
Testing: -drive file=foo:bar
QEMU_PROG: -drive file=foo:bar: Unknown protocol 'foo'
Testing: -drive file.filename=foo:bar
QEMU_PROG: -drive file.filename=foo:bar: Could not open 'foo:bar': No such file or directory
Testing: -hda file:TEST_DIR/t.qcow2
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qququiquit
Testing: -drive file=file:TEST_DIR/t.qcow2
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qququiquit
Testing: -drive file.filename=file:TEST_DIR/t.qcow2
QEMU_PROG: -drive file.filename=file:TEST_DIR/t.qcow2: Could not open 'file:TEST_DIR/t.qcow2': No such file or directory
=== Snapshot mode ===
wrote 4096/4096 bytes at offset 0
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=drive0 -snapshot
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io dqemu-io drqemu-io driqemu-io drivqemu-io driveqemu-io drive0qemu-io drive0 qemu-io drive0 "qemu-io drive0 "wqemu-io drive0 "wrqemu-io drive0 "wriqemu-io drive0 "writqemu-io drive0 "writeqemu-io drive0 "write qemu-io drive0 "write -qemu-io drive0 "write -Pqemu-io drive0 "write -P qemu-io drive0 "write -P 0qemu-io drive0 "write -P 0xqemu-io drive0 "write -P 0x2qemu-io drive0 "write -P 0x22qemu-io drive0 "write -P 0x22 qemu-io drive0 "write -P 0x22 0qemu-io drive0 "write -P 0x22 0 qemu-io drive0 "write -P 0x22 0 4qemu-io drive0 "write -P 0x22 0 4kqemu-io drive0 "write -P 0x22 0 4k"
wrote 4096/4096 bytes at offset 0
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
(qemu) qququiquit
Testing: -drive file=TEST_DIR/t.qcow2,snapshot=on,if=none,id=drive0
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io dqemu-io drqemu-io driqemu-io drivqemu-io driveqemu-io drive0qemu-io drive0 qemu-io drive0 "qemu-io drive0 "wqemu-io drive0 "wrqemu-io drive0 "wriqemu-io drive0 "writqemu-io drive0 "writeqemu-io drive0 "write qemu-io drive0 "write -qemu-io drive0 "write -Pqemu-io drive0 "write -P qemu-io drive0 "write -P 0qemu-io drive0 "write -P 0xqemu-io drive0 "write -P 0x2qemu-io drive0 "write -P 0x22qemu-io drive0 "write -P 0x22 qemu-io drive0 "write -P 0x22 0qemu-io drive0 "write -P 0x22 0 qemu-io drive0 "write -P 0x22 0 4qemu-io drive0 "write -P 0x22 0 4kqemu-io drive0 "write -P 0x22 0 4k"
wrote 4096/4096 bytes at offset 0
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
(qemu) qququiquit
Testing: -drive file.filename=TEST_DIR/t.qcow2,driver=qcow2,snapshot=on,if=none,id=drive0
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io dqemu-io drqemu-io driqemu-io drivqemu-io driveqemu-io drive0qemu-io drive0 qemu-io drive0 "qemu-io drive0 "wqemu-io drive0 "wrqemu-io drive0 "wriqemu-io drive0 "writqemu-io drive0 "writeqemu-io drive0 "write qemu-io drive0 "write -qemu-io drive0 "write -Pqemu-io drive0 "write -P qemu-io drive0 "write -P 0qemu-io drive0 "write -P 0xqemu-io drive0 "write -P 0x2qemu-io drive0 "write -P 0x22qemu-io drive0 "write -P 0x22 qemu-io drive0 "write -P 0x22 0qemu-io drive0 "write -P 0x22 0 qemu-io drive0 "write -P 0x22 0 4qemu-io drive0 "write -P 0x22 0 4kqemu-io drive0 "write -P 0x22 0 4k"
wrote 4096/4096 bytes at offset 0
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
(qemu) qququiquit
Testing: -drive file.filename=TEST_DIR/t.qcow2,driver=qcow2,if=none,id=drive0 -snapshot
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io dqemu-io drqemu-io driqemu-io drivqemu-io driveqemu-io drive0qemu-io drive0 qemu-io drive0 "qemu-io drive0 "wqemu-io drive0 "wrqemu-io drive0 "wriqemu-io drive0 "writqemu-io drive0 "writeqemu-io drive0 "write qemu-io drive0 "write -qemu-io drive0 "write -Pqemu-io drive0 "write -P qemu-io drive0 "write -P 0qemu-io drive0 "write -P 0xqemu-io drive0 "write -P 0x2qemu-io drive0 "write -P 0x22qemu-io drive0 "write -P 0x22 qemu-io drive0 "write -P 0x22 0qemu-io drive0 "write -P 0x22 0 qemu-io drive0 "write -P 0x22 0 4qemu-io drive0 "write -P 0x22 0 4kqemu-io drive0 "write -P 0x22 0 4k"
wrote 4096/4096 bytes at offset 0
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
(qemu) qququiquit
Testing: -drive file=file:TEST_DIR/t.qcow2,if=none,id=drive0 -snapshot
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io dqemu-io drqemu-io driqemu-io drivqemu-io driveqemu-io drive0qemu-io drive0 qemu-io drive0 "qemu-io drive0 "wqemu-io drive0 "wrqemu-io drive0 "wriqemu-io drive0 "writqemu-io drive0 "writeqemu-io drive0 "write qemu-io drive0 "write -qemu-io drive0 "write -Pqemu-io drive0 "write -P qemu-io drive0 "write -P 0qemu-io drive0 "write -P 0xqemu-io drive0 "write -P 0x2qemu-io drive0 "write -P 0x22qemu-io drive0 "write -P 0x22 qemu-io drive0 "write -P 0x22 0qemu-io drive0 "write -P 0x22 0 qemu-io drive0 "write -P 0x22 0 4qemu-io drive0 "write -P 0x22 0 4kqemu-io drive0 "write -P 0x22 0 4k"
wrote 4096/4096 bytes at offset 0
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
(qemu) qququiquit
Testing: -drive file=file:TEST_DIR/t.qcow2,snapshot=on,if=none,id=drive0
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io dqemu-io drqemu-io driqemu-io drivqemu-io driveqemu-io drive0qemu-io drive0 qemu-io drive0 "qemu-io drive0 "wqemu-io drive0 "wrqemu-io drive0 "wriqemu-io drive0 "writqemu-io drive0 "writeqemu-io drive0 "write qemu-io drive0 "write -qemu-io drive0 "write -Pqemu-io drive0 "write -P qemu-io drive0 "write -P 0qemu-io drive0 "write -P 0xqemu-io drive0 "write -P 0x2qemu-io drive0 "write -P 0x22qemu-io drive0 "write -P 0x22 qemu-io drive0 "write -P 0x22 0qemu-io drive0 "write -P 0x22 0 qemu-io drive0 "write -P 0x22 0 4qemu-io drive0 "write -P 0x22 0 4kqemu-io drive0 "write -P 0x22 0 4k"
wrote 4096/4096 bytes at offset 0
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
(qemu) qququiquit
Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=drive0 -snapshot
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io dqemu-io drqemu-io driqemu-io drivqemu-io driveqemu-io drive0qemu-io drive0 qemu-io drive0 "qemu-io drive0 "wqemu-io drive0 "wrqemu-io drive0 "wriqemu-io drive0 "writqemu-io drive0 "writeqemu-io drive0 "write qemu-io drive0 "write -qemu-io drive0 "write -Pqemu-io drive0 "write -P qemu-io drive0 "write -P 0qemu-io drive0 "write -P 0xqemu-io drive0 "write -P 0x2qemu-io drive0 "write -P 0x22qemu-io drive0 "write -P 0x22 qemu-io drive0 "write -P 0x22 0qemu-io drive0 "write -P 0x22 0 qemu-io drive0 "write -P 0x22 0 4qemu-io drive0 "write -P 0x22 0 4kqemu-io drive0 "write -P 0x22 0 4k"
wrote 4096/4096 bytes at offset 0
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
(qemu) qququiquit
Testing: -drive file=TEST_DIR/t.qcow2,snapshot=on,if=none,id=drive0
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io dqemu-io drqemu-io driqemu-io drivqemu-io driveqemu-io drive0qemu-io drive0 qemu-io drive0 "qemu-io drive0 "wqemu-io drive0 "wrqemu-io drive0 "wriqemu-io drive0 "writqemu-io drive0 "writeqemu-io drive0 "write qemu-io drive0 "write -qemu-io drive0 "write -Pqemu-io drive0 "write -P qemu-io drive0 "write -P 0qemu-io drive0 "write -P 0xqemu-io drive0 "write -P 0x2qemu-io drive0 "write -P 0x22qemu-io drive0 "write -P 0x22 qemu-io drive0 "write -P 0x22 0qemu-io drive0 "write -P 0x22 0 qemu-io drive0 "write -P 0x22 0 4qemu-io drive0 "write -P 0x22 0 4kqemu-io drive0 "write -P 0x22 0 4k"
wrote 4096/4096 bytes at offset 0
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
(qemu) qququiquit
read 4096/4096 bytes at offset 0
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
Testing: -drive file=TEST_DIR/t.qcow2,snapshot=off,if=none,id=drive0
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io dqemu-io drqemu-io driqemu-io drivqemu-io driveqemu-io drive0qemu-io drive0 qemu-io drive0 "qemu-io drive0 "wqemu-io drive0 "wrqemu-io drive0 "wriqemu-io drive0 "writqemu-io drive0 "writeqemu-io drive0 "write qemu-io drive0 "write -qemu-io drive0 "write -Pqemu-io drive0 "write -P qemu-io drive0 "write -P 0qemu-io drive0 "write -P 0xqemu-io drive0 "write -P 0x2qemu-io drive0 "write -P 0x22qemu-io drive0 "write -P 0x22 qemu-io drive0 "write -P 0x22 0qemu-io drive0 "write -P 0x22 0 qemu-io drive0 "write -P 0x22 0 4qemu-io drive0 "write -P 0x22 0 4kqemu-io drive0 "write -P 0x22 0 4k"
wrote 4096/4096 bytes at offset 0
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
(qemu) qququiquit
read 4096/4096 bytes at offset 0
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
Testing: -drive file=TEST_DIR/t.qcow2,snapshot=on,if=none,id=drive0
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io dqemu-io drqemu-io driqemu-io drivqemu-io driveqemu-io drive0qemu-io drive0 qemu-io drive0 "qemu-io drive0 "wqemu-io drive0 "wrqemu-io drive0 "wriqemu-io drive0 "writqemu-io drive0 "writeqemu-io drive0 "write qemu-io drive0 "write -qemu-io drive0 "write -Pqemu-io drive0 "write -P qemu-io drive0 "write -P 0qemu-io drive0 "write -P 0xqemu-io drive0 "write -P 0x3qemu-io drive0 "write -P 0x33qemu-io drive0 "write -P 0x33 qemu-io drive0 "write -P 0x33 0qemu-io drive0 "write -P 0x33 0 qemu-io drive0 "write -P 0x33 0 4qemu-io drive0 "write -P 0x33 0 4kqemu-io drive0 "write -P 0x33 0 4k"
wrote 4096/4096 bytes at offset 0
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
(qemu) ccocomcommcommicommitcommit commit dcommit drcommit dricommit drivcommit drivecommit drive0
(qemu) qququiquit
read 4096/4096 bytes at offset 0
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
*** done
Reference in New Issue Copy Permalink