qemu/hw/pci-host/ppce500.c

549 lines
16 KiB
C
Raw Normal View History

/*
* QEMU PowerPC E500 embedded processors pci controller emulation
*
* Copyright (C) 2009 Freescale Semiconductor, Inc. All rights reserved.
*
* Author: Yu Liu, <yu.liu@freescale.com>
*
* This file is derived from hw/ppc4xx_pci.c,
* the copyright for that material belongs to the original owners.
*
* This is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include "qemu/osdep.h"
#include "hw/irq.h"
Adding BAR0 for e500 PCI controller PCI Root complex have TYPE-1 configuration header while PCI endpoint have type-0 configuration header. The type-1 configuration header have a BAR (BAR0). In Freescale PCI controller BAR0 is used for mapping pci address space to CCSR address space. This can used for 2 purposes: 1) for MSI interrupt generation 2) Allow CCSR registers access when configured as PCI endpoint, which I am not sure is a use case with QEMU-KVM guest. What I observed is that when guest read the size of BAR0 of host controller configuration header (TYPE1 header) then it always reads it as 0. When looking into the QEMU hw/ppce500_pci.c, I do not find the PCI controller device registering BAR0. I do not find any other controller also doing so may they do not use BAR0. There are two issues when BAR0 is not there (which I can think of): 1) There should be BAR0 emulated for PCI Root complex (TYPE1 header) and when reading the size of BAR0, it should give size as per real h/w. 2) Do we need this BAR0 inbound address translation? When BAR0 is of non-zero size then it will be configured for PCI address space to local address(CCSR) space translation on inbound access. The primary use case is for MSI interrupt generation. The device is configured with an address offsets in PCI address space, which will be translated to MSI interrupt generation MPIC registers. Currently I do not understand the MSI interrupt generation mechanism in QEMU and also IIRC we do not use QEMU MSI interrupt mechanism on e500 guest machines. But this BAR0 will be used when using MSI on e500. I can see one more issue, There are ATMUs emulated in hw/ppce500_pci.c, but i do not see these being used for address translation. So far that works because pci address space and local address space are 1:1 mapped. BAR0 inbound translation + ATMU translation will complete the address translation of inbound traffic. Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com> [agraf: fix double variable assignment w/o read] Signed-off-by: Alexander Graf <agraf@suse.de>
2012-10-10 08:28:28 +04:00
#include "hw/ppc/e500-ccsr.h"
#include "hw/qdev-properties.h"
#include "migration/vmstate.h"
#include "hw/pci/pci.h"
#include "hw/pci/pci_host.h"
#include "qemu/bswap.h"
#include "qemu/module.h"
#include "hw/pci-host/ppce500.h"
#include "qom/object.h"
#ifdef DEBUG_PCI
#define pci_debug(fmt, ...) fprintf(stderr, fmt, ## __VA_ARGS__)
#else
#define pci_debug(fmt, ...)
#endif
#define PCIE500_CFGADDR 0x0
#define PCIE500_CFGDATA 0x4
#define PCIE500_REG_BASE 0xC00
#define PCIE500_ALL_SIZE 0x1000
#define PCIE500_REG_SIZE (PCIE500_ALL_SIZE - PCIE500_REG_BASE)
#define PCIE500_PCI_IOLEN 0x10000ULL
#define PPCE500_PCI_CONFIG_ADDR 0x0
#define PPCE500_PCI_CONFIG_DATA 0x4
#define PPCE500_PCI_INTACK 0x8
#define PPCE500_PCI_OW1 (0xC20 - PCIE500_REG_BASE)
#define PPCE500_PCI_OW2 (0xC40 - PCIE500_REG_BASE)
#define PPCE500_PCI_OW3 (0xC60 - PCIE500_REG_BASE)
#define PPCE500_PCI_OW4 (0xC80 - PCIE500_REG_BASE)
#define PPCE500_PCI_IW3 (0xDA0 - PCIE500_REG_BASE)
#define PPCE500_PCI_IW2 (0xDC0 - PCIE500_REG_BASE)
#define PPCE500_PCI_IW1 (0xDE0 - PCIE500_REG_BASE)
#define PPCE500_PCI_GASKET_TIMR (0xE20 - PCIE500_REG_BASE)
#define PCI_POTAR 0x0
#define PCI_POTEAR 0x4
#define PCI_POWBAR 0x8
#define PCI_POWAR 0x10
#define PCI_PITAR 0x0
#define PCI_PIWBAR 0x8
#define PCI_PIWBEAR 0xC
#define PCI_PIWAR 0x10
#define PPCE500_PCI_NR_POBS 5
#define PPCE500_PCI_NR_PIBS 3
#define PIWAR_EN 0x80000000 /* Enable */
#define PIWAR_PF 0x20000000 /* prefetch */
#define PIWAR_TGI_LOCAL 0x00f00000 /* target - local memory */
#define PIWAR_READ_SNOOP 0x00050000
#define PIWAR_WRITE_SNOOP 0x00005000
#define PIWAR_SZ_MASK 0x0000003f
struct pci_outbound {
uint32_t potar;
uint32_t potear;
uint32_t powbar;
uint32_t powar;
MemoryRegion mem;
};
struct pci_inbound {
uint32_t pitar;
uint32_t piwbar;
uint32_t piwbear;
uint32_t piwar;
MemoryRegion mem;
};
#define TYPE_PPC_E500_PCI_HOST_BRIDGE "e500-pcihost"
OBJECT_DECLARE_SIMPLE_TYPE(PPCE500PCIState, PPC_E500_PCI_HOST_BRIDGE)
struct PPCE500PCIState {
PCIHostState parent_obj;
struct pci_outbound pob[PPCE500_PCI_NR_POBS];
struct pci_inbound pib[PPCE500_PCI_NR_PIBS];
uint32_t gasket_time;
qemu_irq irq[PCI_NUM_PINS];
uint32_t irq_num[PCI_NUM_PINS];
uint32_t first_slot;
uint32_t first_pin_irq;
AddressSpace bm_as;
MemoryRegion bm;
/* mmio maps */
MemoryRegion container;
MemoryRegion iomem;
MemoryRegion pio;
MemoryRegion busmem;
};
Adding BAR0 for e500 PCI controller PCI Root complex have TYPE-1 configuration header while PCI endpoint have type-0 configuration header. The type-1 configuration header have a BAR (BAR0). In Freescale PCI controller BAR0 is used for mapping pci address space to CCSR address space. This can used for 2 purposes: 1) for MSI interrupt generation 2) Allow CCSR registers access when configured as PCI endpoint, which I am not sure is a use case with QEMU-KVM guest. What I observed is that when guest read the size of BAR0 of host controller configuration header (TYPE1 header) then it always reads it as 0. When looking into the QEMU hw/ppce500_pci.c, I do not find the PCI controller device registering BAR0. I do not find any other controller also doing so may they do not use BAR0. There are two issues when BAR0 is not there (which I can think of): 1) There should be BAR0 emulated for PCI Root complex (TYPE1 header) and when reading the size of BAR0, it should give size as per real h/w. 2) Do we need this BAR0 inbound address translation? When BAR0 is of non-zero size then it will be configured for PCI address space to local address(CCSR) space translation on inbound access. The primary use case is for MSI interrupt generation. The device is configured with an address offsets in PCI address space, which will be translated to MSI interrupt generation MPIC registers. Currently I do not understand the MSI interrupt generation mechanism in QEMU and also IIRC we do not use QEMU MSI interrupt mechanism on e500 guest machines. But this BAR0 will be used when using MSI on e500. I can see one more issue, There are ATMUs emulated in hw/ppce500_pci.c, but i do not see these being used for address translation. So far that works because pci address space and local address space are 1:1 mapped. BAR0 inbound translation + ATMU translation will complete the address translation of inbound traffic. Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com> [agraf: fix double variable assignment w/o read] Signed-off-by: Alexander Graf <agraf@suse.de>
2012-10-10 08:28:28 +04:00
#define TYPE_PPC_E500_PCI_BRIDGE "e500-host-bridge"
OBJECT_DECLARE_SIMPLE_TYPE(PPCE500PCIBridgeState, PPC_E500_PCI_BRIDGE)
Adding BAR0 for e500 PCI controller PCI Root complex have TYPE-1 configuration header while PCI endpoint have type-0 configuration header. The type-1 configuration header have a BAR (BAR0). In Freescale PCI controller BAR0 is used for mapping pci address space to CCSR address space. This can used for 2 purposes: 1) for MSI interrupt generation 2) Allow CCSR registers access when configured as PCI endpoint, which I am not sure is a use case with QEMU-KVM guest. What I observed is that when guest read the size of BAR0 of host controller configuration header (TYPE1 header) then it always reads it as 0. When looking into the QEMU hw/ppce500_pci.c, I do not find the PCI controller device registering BAR0. I do not find any other controller also doing so may they do not use BAR0. There are two issues when BAR0 is not there (which I can think of): 1) There should be BAR0 emulated for PCI Root complex (TYPE1 header) and when reading the size of BAR0, it should give size as per real h/w. 2) Do we need this BAR0 inbound address translation? When BAR0 is of non-zero size then it will be configured for PCI address space to local address(CCSR) space translation on inbound access. The primary use case is for MSI interrupt generation. The device is configured with an address offsets in PCI address space, which will be translated to MSI interrupt generation MPIC registers. Currently I do not understand the MSI interrupt generation mechanism in QEMU and also IIRC we do not use QEMU MSI interrupt mechanism on e500 guest machines. But this BAR0 will be used when using MSI on e500. I can see one more issue, There are ATMUs emulated in hw/ppce500_pci.c, but i do not see these being used for address translation. So far that works because pci address space and local address space are 1:1 mapped. BAR0 inbound translation + ATMU translation will complete the address translation of inbound traffic. Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com> [agraf: fix double variable assignment w/o read] Signed-off-by: Alexander Graf <agraf@suse.de>
2012-10-10 08:28:28 +04:00
struct PPCE500PCIBridgeState {
/*< private >*/
PCIDevice parent;
/*< public >*/
MemoryRegion bar0;
};
static uint64_t pci_reg_read4(void *opaque, hwaddr addr,
unsigned size)
{
PPCE500PCIState *pci = opaque;
unsigned long win;
uint32_t value = 0;
int idx;
win = addr & 0xfe0;
switch (win) {
case PPCE500_PCI_OW1:
case PPCE500_PCI_OW2:
case PPCE500_PCI_OW3:
case PPCE500_PCI_OW4:
idx = (addr >> 5) & 0x7;
switch (addr & 0x1F) {
case PCI_POTAR:
value = pci->pob[idx].potar;
break;
case PCI_POTEAR:
value = pci->pob[idx].potear;
break;
case PCI_POWBAR:
value = pci->pob[idx].powbar;
break;
case PCI_POWAR:
value = pci->pob[idx].powar;
break;
default:
break;
}
break;
case PPCE500_PCI_IW3:
case PPCE500_PCI_IW2:
case PPCE500_PCI_IW1:
idx = ((addr >> 5) & 0x3) - 1;
switch (addr & 0x1F) {
case PCI_PITAR:
value = pci->pib[idx].pitar;
break;
case PCI_PIWBAR:
value = pci->pib[idx].piwbar;
break;
case PCI_PIWBEAR:
value = pci->pib[idx].piwbear;
break;
case PCI_PIWAR:
value = pci->pib[idx].piwar;
break;
default:
break;
};
break;
case PPCE500_PCI_GASKET_TIMR:
value = pci->gasket_time;
break;
default:
break;
}
pci_debug("%s: win:%lx(addr:" TARGET_FMT_plx ") -> value:%x\n", __func__,
win, addr, value);
return value;
}
/* DMA mapping */
static void e500_update_piw(PPCE500PCIState *pci, int idx)
{
uint64_t tar = ((uint64_t)pci->pib[idx].pitar) << 12;
uint64_t wbar = ((uint64_t)pci->pib[idx].piwbar) << 12;
uint64_t war = pci->pib[idx].piwar;
uint64_t size = 2ULL << (war & PIWAR_SZ_MASK);
MemoryRegion *address_space_mem = get_system_memory();
MemoryRegion *mem = &pci->pib[idx].mem;
MemoryRegion *bm = &pci->bm;
char *name;
if (memory_region_is_mapped(mem)) {
/* Before we modify anything, unmap and destroy the region */
memory_region_del_subregion(bm, mem);
object_unparent(OBJECT(mem));
}
if (!(war & PIWAR_EN)) {
/* Not enabled, nothing to do */
return;
}
name = g_strdup_printf("PCI Inbound Window %d", idx);
memory_region_init_alias(mem, OBJECT(pci), name, address_space_mem, tar,
size);
memory_region_add_subregion_overlap(bm, wbar, mem, -1);
g_free(name);
pci_debug("%s: Added window of size=%#lx from PCI=%#lx to CPU=%#lx\n",
__func__, size, wbar, tar);
}
/* BAR mapping */
static void e500_update_pow(PPCE500PCIState *pci, int idx)
{
uint64_t tar = ((uint64_t)pci->pob[idx].potar) << 12;
uint64_t wbar = ((uint64_t)pci->pob[idx].powbar) << 12;
uint64_t war = pci->pob[idx].powar;
uint64_t size = 2ULL << (war & PIWAR_SZ_MASK);
MemoryRegion *mem = &pci->pob[idx].mem;
MemoryRegion *address_space_mem = get_system_memory();
char *name;
if (memory_region_is_mapped(mem)) {
/* Before we modify anything, unmap and destroy the region */
memory_region_del_subregion(address_space_mem, mem);
object_unparent(OBJECT(mem));
}
if (!(war & PIWAR_EN)) {
/* Not enabled, nothing to do */
return;
}
name = g_strdup_printf("PCI Outbound Window %d", idx);
memory_region_init_alias(mem, OBJECT(pci), name, &pci->busmem, tar,
size);
memory_region_add_subregion(address_space_mem, wbar, mem);
g_free(name);
pci_debug("%s: Added window of size=%#lx from CPU=%#lx to PCI=%#lx\n",
__func__, size, wbar, tar);
}
static void pci_reg_write4(void *opaque, hwaddr addr,
uint64_t value, unsigned size)
{
PPCE500PCIState *pci = opaque;
unsigned long win;
int idx;
win = addr & 0xfe0;
pci_debug("%s: value:%x -> win:%lx(addr:" TARGET_FMT_plx ")\n",
__func__, (unsigned)value, win, addr);
switch (win) {
case PPCE500_PCI_OW1:
case PPCE500_PCI_OW2:
case PPCE500_PCI_OW3:
case PPCE500_PCI_OW4:
idx = (addr >> 5) & 0x7;
switch (addr & 0x1F) {
case PCI_POTAR:
pci->pob[idx].potar = value;
e500_update_pow(pci, idx);
break;
case PCI_POTEAR:
pci->pob[idx].potear = value;
e500_update_pow(pci, idx);
break;
case PCI_POWBAR:
pci->pob[idx].powbar = value;
e500_update_pow(pci, idx);
break;
case PCI_POWAR:
pci->pob[idx].powar = value;
e500_update_pow(pci, idx);
break;
default:
break;
};
break;
case PPCE500_PCI_IW3:
case PPCE500_PCI_IW2:
case PPCE500_PCI_IW1:
idx = ((addr >> 5) & 0x3) - 1;
switch (addr & 0x1F) {
case PCI_PITAR:
pci->pib[idx].pitar = value;
e500_update_piw(pci, idx);
break;
case PCI_PIWBAR:
pci->pib[idx].piwbar = value;
e500_update_piw(pci, idx);
break;
case PCI_PIWBEAR:
pci->pib[idx].piwbear = value;
e500_update_piw(pci, idx);
break;
case PCI_PIWAR:
pci->pib[idx].piwar = value;
e500_update_piw(pci, idx);
break;
default:
break;
};
break;
case PPCE500_PCI_GASKET_TIMR:
pci->gasket_time = value;
break;
default:
break;
};
}
static const MemoryRegionOps e500_pci_reg_ops = {
.read = pci_reg_read4,
.write = pci_reg_write4,
.endianness = DEVICE_BIG_ENDIAN,
};
static int mpc85xx_pci_map_irq(PCIDevice *pci_dev, int pin)
{
int devno = pci_dev->devfn >> 3;
int ret;
ret = ppce500_pci_map_irq_slot(devno, pin);
pci_debug("%s: devfn %x irq %d -> %d devno:%x\n", __func__,
pci_dev->devfn, pin, ret, devno);
return ret;
}
static void mpc85xx_pci_set_irq(void *opaque, int pin, int level)
{
PPCE500PCIState *s = opaque;
qemu_irq *pic = s->irq;
pci_debug("%s: PCI irq %d, level:%d\n", __func__, pin , level);
qemu_set_irq(pic[pin], level);
}
static PCIINTxRoute e500_route_intx_pin_to_irq(void *opaque, int pin)
{
PCIINTxRoute route;
PPCE500PCIState *s = opaque;
route.mode = PCI_INTX_ENABLED;
route.irq = s->irq_num[pin];
pci_debug("%s: PCI irq-pin = %d, irq_num= %d\n", __func__, pin, route.irq);
return route;
}
static const VMStateDescription vmstate_pci_outbound = {
.name = "pci_outbound",
.version_id = 0,
.minimum_version_id = 0,
.fields = (VMStateField[]) {
VMSTATE_UINT32(potar, struct pci_outbound),
VMSTATE_UINT32(potear, struct pci_outbound),
VMSTATE_UINT32(powbar, struct pci_outbound),
VMSTATE_UINT32(powar, struct pci_outbound),
VMSTATE_END_OF_LIST()
}
};
static const VMStateDescription vmstate_pci_inbound = {
.name = "pci_inbound",
.version_id = 0,
.minimum_version_id = 0,
.fields = (VMStateField[]) {
VMSTATE_UINT32(pitar, struct pci_inbound),
VMSTATE_UINT32(piwbar, struct pci_inbound),
VMSTATE_UINT32(piwbear, struct pci_inbound),
VMSTATE_UINT32(piwar, struct pci_inbound),
VMSTATE_END_OF_LIST()
}
};
static const VMStateDescription vmstate_ppce500_pci = {
.name = "ppce500_pci",
.version_id = 1,
.minimum_version_id = 1,
.fields = (VMStateField[]) {
VMSTATE_STRUCT_ARRAY(pob, PPCE500PCIState, PPCE500_PCI_NR_POBS, 1,
vmstate_pci_outbound, struct pci_outbound),
VMSTATE_STRUCT_ARRAY(pib, PPCE500PCIState, PPCE500_PCI_NR_PIBS, 1,
vmstate_pci_inbound, struct pci_inbound),
VMSTATE_UINT32(gasket_time, PPCE500PCIState),
VMSTATE_END_OF_LIST()
}
};
#include "exec/address-spaces.h"
static void e500_pcihost_bridge_realize(PCIDevice *d, Error **errp)
Adding BAR0 for e500 PCI controller PCI Root complex have TYPE-1 configuration header while PCI endpoint have type-0 configuration header. The type-1 configuration header have a BAR (BAR0). In Freescale PCI controller BAR0 is used for mapping pci address space to CCSR address space. This can used for 2 purposes: 1) for MSI interrupt generation 2) Allow CCSR registers access when configured as PCI endpoint, which I am not sure is a use case with QEMU-KVM guest. What I observed is that when guest read the size of BAR0 of host controller configuration header (TYPE1 header) then it always reads it as 0. When looking into the QEMU hw/ppce500_pci.c, I do not find the PCI controller device registering BAR0. I do not find any other controller also doing so may they do not use BAR0. There are two issues when BAR0 is not there (which I can think of): 1) There should be BAR0 emulated for PCI Root complex (TYPE1 header) and when reading the size of BAR0, it should give size as per real h/w. 2) Do we need this BAR0 inbound address translation? When BAR0 is of non-zero size then it will be configured for PCI address space to local address(CCSR) space translation on inbound access. The primary use case is for MSI interrupt generation. The device is configured with an address offsets in PCI address space, which will be translated to MSI interrupt generation MPIC registers. Currently I do not understand the MSI interrupt generation mechanism in QEMU and also IIRC we do not use QEMU MSI interrupt mechanism on e500 guest machines. But this BAR0 will be used when using MSI on e500. I can see one more issue, There are ATMUs emulated in hw/ppce500_pci.c, but i do not see these being used for address translation. So far that works because pci address space and local address space are 1:1 mapped. BAR0 inbound translation + ATMU translation will complete the address translation of inbound traffic. Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com> [agraf: fix double variable assignment w/o read] Signed-off-by: Alexander Graf <agraf@suse.de>
2012-10-10 08:28:28 +04:00
{
PPCE500PCIBridgeState *b = PPC_E500_PCI_BRIDGE(d);
PPCE500CCSRState *ccsr = CCSR(container_get(qdev_get_machine(),
"/e500-ccsr"));
memory_region_init_alias(&b->bar0, OBJECT(ccsr), "e500-pci-bar0", &ccsr->ccsr_space,
Adding BAR0 for e500 PCI controller PCI Root complex have TYPE-1 configuration header while PCI endpoint have type-0 configuration header. The type-1 configuration header have a BAR (BAR0). In Freescale PCI controller BAR0 is used for mapping pci address space to CCSR address space. This can used for 2 purposes: 1) for MSI interrupt generation 2) Allow CCSR registers access when configured as PCI endpoint, which I am not sure is a use case with QEMU-KVM guest. What I observed is that when guest read the size of BAR0 of host controller configuration header (TYPE1 header) then it always reads it as 0. When looking into the QEMU hw/ppce500_pci.c, I do not find the PCI controller device registering BAR0. I do not find any other controller also doing so may they do not use BAR0. There are two issues when BAR0 is not there (which I can think of): 1) There should be BAR0 emulated for PCI Root complex (TYPE1 header) and when reading the size of BAR0, it should give size as per real h/w. 2) Do we need this BAR0 inbound address translation? When BAR0 is of non-zero size then it will be configured for PCI address space to local address(CCSR) space translation on inbound access. The primary use case is for MSI interrupt generation. The device is configured with an address offsets in PCI address space, which will be translated to MSI interrupt generation MPIC registers. Currently I do not understand the MSI interrupt generation mechanism in QEMU and also IIRC we do not use QEMU MSI interrupt mechanism on e500 guest machines. But this BAR0 will be used when using MSI on e500. I can see one more issue, There are ATMUs emulated in hw/ppce500_pci.c, but i do not see these being used for address translation. So far that works because pci address space and local address space are 1:1 mapped. BAR0 inbound translation + ATMU translation will complete the address translation of inbound traffic. Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com> [agraf: fix double variable assignment w/o read] Signed-off-by: Alexander Graf <agraf@suse.de>
2012-10-10 08:28:28 +04:00
0, int128_get64(ccsr->ccsr_space.size));
pci_register_bar(d, 0, PCI_BASE_ADDRESS_SPACE_MEMORY, &b->bar0);
}
static AddressSpace *e500_pcihost_set_iommu(PCIBus *bus, void *opaque,
int devfn)
{
PPCE500PCIState *s = opaque;
return &s->bm_as;
}
static void e500_pcihost_realize(DeviceState *dev, Error **errp)
{
SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
PCIHostState *h;
PPCE500PCIState *s;
PCIBus *b;
int i;
h = PCI_HOST_BRIDGE(dev);
s = PPC_E500_PCI_HOST_BRIDGE(dev);
for (i = 0; i < ARRAY_SIZE(s->irq); i++) {
sysbus_init_irq(sbd, &s->irq[i]);
}
for (i = 0; i < PCI_NUM_PINS; i++) {
s->irq_num[i] = s->first_pin_irq + i;
}
memory_region_init(&s->pio, OBJECT(s), "pci-pio", PCIE500_PCI_IOLEN);
memory_region_init(&s->busmem, OBJECT(s), "pci bus memory", UINT64_MAX);
/* PIO lives at the bottom of our bus space */
memory_region_add_subregion_overlap(&s->busmem, 0, &s->pio, -2);
b = pci_register_root_bus(dev, NULL, mpc85xx_pci_set_irq,
mpc85xx_pci_map_irq, s, &s->busmem, &s->pio,
PCI_DEVFN(s->first_slot, 0), 4, TYPE_PCI_BUS);
h->bus = b;
/* Set up PCI view of memory */
memory_region_init(&s->bm, OBJECT(s), "bm-e500", UINT64_MAX);
memory_region_add_subregion(&s->bm, 0x0, &s->busmem);
address_space_init(&s->bm_as, &s->bm, "pci-bm");
pci_setup_iommu(b, e500_pcihost_set_iommu, s);
pci_create_simple(b, 0, "e500-host-bridge");
memory_region_init(&s->container, OBJECT(h), "pci-container", PCIE500_ALL_SIZE);
memory_region_init_io(&h->conf_mem, OBJECT(h), &pci_host_conf_be_ops, h,
"pci-conf-idx", 4);
memory_region_init_io(&h->data_mem, OBJECT(h), &pci_host_data_le_ops, h,
"pci-conf-data", 4);
memory_region_init_io(&s->iomem, OBJECT(s), &e500_pci_reg_ops, s,
"pci.reg", PCIE500_REG_SIZE);
memory_region_add_subregion(&s->container, PCIE500_CFGADDR, &h->conf_mem);
memory_region_add_subregion(&s->container, PCIE500_CFGDATA, &h->data_mem);
memory_region_add_subregion(&s->container, PCIE500_REG_BASE, &s->iomem);
sysbus_init_mmio(sbd, &s->container);
pci_bus_set_route_irq_fn(b, e500_route_intx_pin_to_irq);
}
static void e500_host_bridge_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
k->realize = e500_pcihost_bridge_realize;
k->vendor_id = PCI_VENDOR_ID_FREESCALE;
k->device_id = PCI_DEVICE_ID_MPC8533E;
k->class_id = PCI_CLASS_PROCESSOR_POWERPC;
dc->desc = "Host bridge";
/*
* PCI-facing part of the host bridge, not usable without the
* host-facing part, which can't be device_add'ed, yet.
*/
qdev: Replace cannot_instantiate_with_device_add_yet with !user_creatable cannot_instantiate_with_device_add_yet was introduced by commit efec3dd631d94160288392721a5f9c39e50fb2bc to replace no_user. It was supposed to be a temporary measure. When it was introduced, we had 54 cannot_instantiate_with_device_add_yet=true lines in the code. Today (3 years later) this number has not shrunk: we now have 57 cannot_instantiate_with_device_add_yet=true lines. I think it is safe to say it is not a temporary measure, and we won't see the flag go away soon. Instead of a long field name that misleads people to believe it is temporary, replace it a shorter and less misleading field: user_creatable. Except for code comments, changes were generated using the following Coccinelle patch: @@ expression DC; @@ ( -DC->cannot_instantiate_with_device_add_yet = false; +DC->user_creatable = true; | -DC->cannot_instantiate_with_device_add_yet = true; +DC->user_creatable = false; ) @@ typedef ObjectClass; expression dc; identifier class, data; @@ static void device_class_init(ObjectClass *class, void *data) { ... dc->hotpluggable = true; +dc->user_creatable = true; ... } @@ @@ struct DeviceClass { ... -bool cannot_instantiate_with_device_add_yet; +bool user_creatable; ... } @@ expression DC; @@ ( -!DC->cannot_instantiate_with_device_add_yet +DC->user_creatable | -DC->cannot_instantiate_with_device_add_yet +!DC->user_creatable ) Cc: Alistair Francis <alistair.francis@xilinx.com> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Marcel Apfelbaum <marcel@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Thomas Huth <thuth@redhat.com> Acked-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Acked-by: Marcel Apfelbaum <marcel@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20170503203604.31462-2-ehabkost@redhat.com> [ehabkost: kept "TODO remove once we're there" comment] Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-05-03 23:35:44 +03:00
dc->user_creatable = false;
}
static const TypeInfo e500_host_bridge_info = {
.name = TYPE_PPC_E500_PCI_BRIDGE,
.parent = TYPE_PCI_DEVICE,
Adding BAR0 for e500 PCI controller PCI Root complex have TYPE-1 configuration header while PCI endpoint have type-0 configuration header. The type-1 configuration header have a BAR (BAR0). In Freescale PCI controller BAR0 is used for mapping pci address space to CCSR address space. This can used for 2 purposes: 1) for MSI interrupt generation 2) Allow CCSR registers access when configured as PCI endpoint, which I am not sure is a use case with QEMU-KVM guest. What I observed is that when guest read the size of BAR0 of host controller configuration header (TYPE1 header) then it always reads it as 0. When looking into the QEMU hw/ppce500_pci.c, I do not find the PCI controller device registering BAR0. I do not find any other controller also doing so may they do not use BAR0. There are two issues when BAR0 is not there (which I can think of): 1) There should be BAR0 emulated for PCI Root complex (TYPE1 header) and when reading the size of BAR0, it should give size as per real h/w. 2) Do we need this BAR0 inbound address translation? When BAR0 is of non-zero size then it will be configured for PCI address space to local address(CCSR) space translation on inbound access. The primary use case is for MSI interrupt generation. The device is configured with an address offsets in PCI address space, which will be translated to MSI interrupt generation MPIC registers. Currently I do not understand the MSI interrupt generation mechanism in QEMU and also IIRC we do not use QEMU MSI interrupt mechanism on e500 guest machines. But this BAR0 will be used when using MSI on e500. I can see one more issue, There are ATMUs emulated in hw/ppce500_pci.c, but i do not see these being used for address translation. So far that works because pci address space and local address space are 1:1 mapped. BAR0 inbound translation + ATMU translation will complete the address translation of inbound traffic. Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com> [agraf: fix double variable assignment w/o read] Signed-off-by: Alexander Graf <agraf@suse.de>
2012-10-10 08:28:28 +04:00
.instance_size = sizeof(PPCE500PCIBridgeState),
.class_init = e500_host_bridge_class_init,
pci: Add INTERFACE_CONVENTIONAL_PCI_DEVICE to Conventional PCI devices Add INTERFACE_CONVENTIONAL_PCI_DEVICE to all direct subtypes of TYPE_PCI_DEVICE, except: 1) The ones that already have INTERFACE_PCIE_DEVICE set: * base-xhci * e1000e * nvme * pvscsi * vfio-pci * virtio-pci * vmxnet3 2) base-pci-bridge Not all PCI bridges are Conventional PCI devices, so INTERFACE_CONVENTIONAL_PCI_DEVICE is added only to the subtypes that are actually Conventional PCI: * dec-21154-p2p-bridge * i82801b11-bridge * pbm-bridge * pci-bridge The direct subtypes of base-pci-bridge not touched by this patch are: * xilinx-pcie-root: Already marked as PCIe-only. * pcie-pci-bridge: Already marked as PCIe-only. * pcie-port: all non-abstract subtypes of pcie-port are already marked as PCIe-only devices. 3) megasas-base Not all megasas devices are Conventional PCI devices, so the interface names are added to the subclasses registered by megasas_register_types(), according to information in the megasas_devices[] array. "megasas-gen2" already implements INTERFACE_PCIE_DEVICE, so add INTERFACE_CONVENTIONAL_PCI_DEVICE only to "megasas". Acked-by: Alberto Garcia <berto@igalia.com> Acked-by: John Snow <jsnow@redhat.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-09-27 22:56:34 +03:00
.interfaces = (InterfaceInfo[]) {
{ INTERFACE_CONVENTIONAL_PCI_DEVICE },
{ },
},
};
static Property pcihost_properties[] = {
DEFINE_PROP_UINT32("first_slot", PPCE500PCIState, first_slot, 0x11),
DEFINE_PROP_UINT32("first_pin_irq", PPCE500PCIState, first_pin_irq, 0x1),
DEFINE_PROP_END_OF_LIST(),
};
static void e500_pcihost_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
dc->realize = e500_pcihost_realize;
set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
device_class_set_props(dc, pcihost_properties);
dc->vmsd = &vmstate_ppce500_pci;
}
static const TypeInfo e500_pcihost_info = {
.name = TYPE_PPC_E500_PCI_HOST_BRIDGE,
.parent = TYPE_PCI_HOST_BRIDGE,
.instance_size = sizeof(PPCE500PCIState),
.class_init = e500_pcihost_class_init,
};
static void e500_pci_register_types(void)
{
type_register_static(&e500_pcihost_info);
type_register_static(&e500_host_bridge_info);
}
type_init(e500_pci_register_types)