qemu/hw/arm/vexpress.c

853 lines
29 KiB
C
Raw Normal View History

/*
* ARM Versatile Express emulation.
*
* Copyright (c) 2010 - 2011 B Labs Ltd.
* Copyright (c) 2011 Linaro Limited
* Written by Bahadir Balban, Amit Mahajan, Peter Maydell
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, see <http://www.gnu.org/licenses/>.
*
* Contributions after 2012-01-13 are licensed under the terms of the
* GNU GPL, version 2 or (at your option) any later version.
*/
#include "qemu/osdep.h"
2016-03-14 11:01:28 +03:00
#include "qapi/error.h"
#include "qemu-common.h"
#include "cpu.h"
#include "hw/sysbus.h"
#include "hw/arm/arm.h"
#include "hw/arm/primecell.h"
#include "hw/devices.h"
#include "hw/i2c/i2c.h"
#include "net/net.h"
#include "sysemu/sysemu.h"
#include "hw/boards.h"
#include "hw/loader.h"
#include "exec/address-spaces.h"
#include "hw/block/flash.h"
#include "sysemu/device_tree.h"
#include "qemu/error-report.h"
#include <libfdt.h>
#include "hw/char/pl011.h"
#include "hw/cpu/a9mpcore.h"
#include "hw/cpu/a15mpcore.h"
#define VEXPRESS_BOARD_ID 0x8e0
#define VEXPRESS_FLASH_SIZE (64 * 1024 * 1024)
#define VEXPRESS_FLASH_SECT_SIZE (256 * 1024)
/* Number of virtio transports to create (0..8; limited by
* number of available IRQ lines).
*/
#define NUM_VIRTIO_TRANSPORTS 4
/* Address maps for peripherals:
* the Versatile Express motherboard has two possible maps,
* the "legacy" one (used for A9) and the "Cortex-A Series"
* map (used for newer cores).
* Individual daughterboards can also have different maps for
* their peripherals.
*/
enum {
VE_SYSREGS,
VE_SP810,
VE_SERIALPCI,
VE_PL041,
VE_MMCI,
VE_KMI0,
VE_KMI1,
VE_UART0,
VE_UART1,
VE_UART2,
VE_UART3,
VE_WDT,
VE_TIMER01,
VE_TIMER23,
VE_SERIALDVI,
VE_RTC,
VE_COMPACTFLASH,
VE_CLCD,
VE_NORFLASH0,
VE_NORFLASH1,
VE_NORFLASHALIAS,
VE_SRAM,
VE_VIDEORAM,
VE_ETHERNET,
VE_USB,
VE_DAPROM,
VE_VIRTIO,
};
static hwaddr motherboard_legacy_map[] = {
[VE_NORFLASHALIAS] = 0,
/* CS7: 0x10000000 .. 0x10020000 */
[VE_SYSREGS] = 0x10000000,
[VE_SP810] = 0x10001000,
[VE_SERIALPCI] = 0x10002000,
[VE_PL041] = 0x10004000,
[VE_MMCI] = 0x10005000,
[VE_KMI0] = 0x10006000,
[VE_KMI1] = 0x10007000,
[VE_UART0] = 0x10009000,
[VE_UART1] = 0x1000a000,
[VE_UART2] = 0x1000b000,
[VE_UART3] = 0x1000c000,
[VE_WDT] = 0x1000f000,
[VE_TIMER01] = 0x10011000,
[VE_TIMER23] = 0x10012000,
[VE_VIRTIO] = 0x10013000,
[VE_SERIALDVI] = 0x10016000,
[VE_RTC] = 0x10017000,
[VE_COMPACTFLASH] = 0x1001a000,
[VE_CLCD] = 0x1001f000,
/* CS0: 0x40000000 .. 0x44000000 */
[VE_NORFLASH0] = 0x40000000,
/* CS1: 0x44000000 .. 0x48000000 */
[VE_NORFLASH1] = 0x44000000,
/* CS2: 0x48000000 .. 0x4a000000 */
[VE_SRAM] = 0x48000000,
/* CS3: 0x4c000000 .. 0x50000000 */
[VE_VIDEORAM] = 0x4c000000,
[VE_ETHERNET] = 0x4e000000,
[VE_USB] = 0x4f000000,
};
static hwaddr motherboard_aseries_map[] = {
[VE_NORFLASHALIAS] = 0,
/* CS0: 0x08000000 .. 0x0c000000 */
[VE_NORFLASH0] = 0x08000000,
/* CS4: 0x0c000000 .. 0x10000000 */
[VE_NORFLASH1] = 0x0c000000,
/* CS5: 0x10000000 .. 0x14000000 */
/* CS1: 0x14000000 .. 0x18000000 */
[VE_SRAM] = 0x14000000,
/* CS2: 0x18000000 .. 0x1c000000 */
[VE_VIDEORAM] = 0x18000000,
[VE_ETHERNET] = 0x1a000000,
[VE_USB] = 0x1b000000,
/* CS3: 0x1c000000 .. 0x20000000 */
[VE_DAPROM] = 0x1c000000,
[VE_SYSREGS] = 0x1c010000,
[VE_SP810] = 0x1c020000,
[VE_SERIALPCI] = 0x1c030000,
[VE_PL041] = 0x1c040000,
[VE_MMCI] = 0x1c050000,
[VE_KMI0] = 0x1c060000,
[VE_KMI1] = 0x1c070000,
[VE_UART0] = 0x1c090000,
[VE_UART1] = 0x1c0a0000,
[VE_UART2] = 0x1c0b0000,
[VE_UART3] = 0x1c0c0000,
[VE_WDT] = 0x1c0f0000,
[VE_TIMER01] = 0x1c110000,
[VE_TIMER23] = 0x1c120000,
[VE_VIRTIO] = 0x1c130000,
[VE_SERIALDVI] = 0x1c160000,
[VE_RTC] = 0x1c170000,
[VE_COMPACTFLASH] = 0x1c1a0000,
[VE_CLCD] = 0x1c1f0000,
};
/* Structure defining the peculiarities of a specific daughterboard */
typedef struct VEDBoardInfo VEDBoardInfo;
typedef struct {
MachineClass parent;
VEDBoardInfo *daughterboard;
} VexpressMachineClass;
typedef struct {
MachineState parent;
bool secure;
bool virt;
} VexpressMachineState;
#define TYPE_VEXPRESS_MACHINE "vexpress"
#define TYPE_VEXPRESS_A9_MACHINE MACHINE_TYPE_NAME("vexpress-a9")
#define TYPE_VEXPRESS_A15_MACHINE MACHINE_TYPE_NAME("vexpress-a15")
#define VEXPRESS_MACHINE(obj) \
OBJECT_CHECK(VexpressMachineState, (obj), TYPE_VEXPRESS_MACHINE)
#define VEXPRESS_MACHINE_GET_CLASS(obj) \
OBJECT_GET_CLASS(VexpressMachineClass, obj, TYPE_VEXPRESS_MACHINE)
#define VEXPRESS_MACHINE_CLASS(klass) \
OBJECT_CLASS_CHECK(VexpressMachineClass, klass, TYPE_VEXPRESS_MACHINE)
typedef void DBoardInitFn(const VexpressMachineState *machine,
ram_addr_t ram_size,
arm: drop intermediate cpu_model -> cpu type parsing and use cpu type directly there are 2 use cases to deal with: 1: fixed CPU models per board/soc 2: boards with user configurable cpu_model and fallback to default cpu_model if user hasn't specified one explicitly For the 1st drop intermediate cpu_model parsing and use const cpu type directly, which replaces: typename = object_class_get_name( cpu_class_by_name(TYPE_ARM_CPU, cpu_model)) object_new(typename) with object_new(FOO_CPU_TYPE_NAME) or cpu_generic_init(BASE_CPU_TYPE, "my cpu model") with cpu_create(FOO_CPU_TYPE_NAME) as result 1st use case doesn't have to invoke not necessary translation and not needed code is removed. For the 2nd 1: set default cpu type with MachineClass::default_cpu_type and 2: use generic cpu_model parsing that done before machine_init() is run and: 2.1: drop custom cpu_model parsing where pattern is: typename = object_class_get_name( cpu_class_by_name(TYPE_ARM_CPU, cpu_model)) [parse_features(typename, cpu_model, &err) ] 2.2: or replace cpu_generic_init() which does what 2.1 does + create_cpu(typename) with just create_cpu(machine->cpu_type) as result cpu_name -> cpu_type translation is done using generic machine code one including parsing optional features if supported/present (removes a bunch of duplicated cpu_model parsing code) and default cpu type is defined in an uniform way within machine_class_init callbacks instead of adhoc places in boadr's machine_init code. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1505318697-77161-6-git-send-email-imammedo@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-09-13 19:04:57 +03:00
const char *cpu_type,
qemu_irq *pic);
struct VEDBoardInfo {
struct arm_boot_info bootinfo;
const hwaddr *motherboard_map;
hwaddr loader_start;
const hwaddr gic_cpu_if_addr;
uint32_t proc_id;
uint32_t num_voltage_sensors;
const uint32_t *voltages;
uint32_t num_clocks;
const uint32_t *clocks;
DBoardInitFn *init;
};
arm: drop intermediate cpu_model -> cpu type parsing and use cpu type directly there are 2 use cases to deal with: 1: fixed CPU models per board/soc 2: boards with user configurable cpu_model and fallback to default cpu_model if user hasn't specified one explicitly For the 1st drop intermediate cpu_model parsing and use const cpu type directly, which replaces: typename = object_class_get_name( cpu_class_by_name(TYPE_ARM_CPU, cpu_model)) object_new(typename) with object_new(FOO_CPU_TYPE_NAME) or cpu_generic_init(BASE_CPU_TYPE, "my cpu model") with cpu_create(FOO_CPU_TYPE_NAME) as result 1st use case doesn't have to invoke not necessary translation and not needed code is removed. For the 2nd 1: set default cpu type with MachineClass::default_cpu_type and 2: use generic cpu_model parsing that done before machine_init() is run and: 2.1: drop custom cpu_model parsing where pattern is: typename = object_class_get_name( cpu_class_by_name(TYPE_ARM_CPU, cpu_model)) [parse_features(typename, cpu_model, &err) ] 2.2: or replace cpu_generic_init() which does what 2.1 does + create_cpu(typename) with just create_cpu(machine->cpu_type) as result cpu_name -> cpu_type translation is done using generic machine code one including parsing optional features if supported/present (removes a bunch of duplicated cpu_model parsing code) and default cpu type is defined in an uniform way within machine_class_init callbacks instead of adhoc places in boadr's machine_init code. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1505318697-77161-6-git-send-email-imammedo@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-09-13 19:04:57 +03:00
static void init_cpus(const char *cpu_type, const char *privdev,
hwaddr periphbase, qemu_irq *pic, bool secure, bool virt)
{
DeviceState *dev;
SysBusDevice *busdev;
int n;
/* Create the actual CPUs */
for (n = 0; n < smp_cpus; n++) {
arm: drop intermediate cpu_model -> cpu type parsing and use cpu type directly there are 2 use cases to deal with: 1: fixed CPU models per board/soc 2: boards with user configurable cpu_model and fallback to default cpu_model if user hasn't specified one explicitly For the 1st drop intermediate cpu_model parsing and use const cpu type directly, which replaces: typename = object_class_get_name( cpu_class_by_name(TYPE_ARM_CPU, cpu_model)) object_new(typename) with object_new(FOO_CPU_TYPE_NAME) or cpu_generic_init(BASE_CPU_TYPE, "my cpu model") with cpu_create(FOO_CPU_TYPE_NAME) as result 1st use case doesn't have to invoke not necessary translation and not needed code is removed. For the 2nd 1: set default cpu type with MachineClass::default_cpu_type and 2: use generic cpu_model parsing that done before machine_init() is run and: 2.1: drop custom cpu_model parsing where pattern is: typename = object_class_get_name( cpu_class_by_name(TYPE_ARM_CPU, cpu_model)) [parse_features(typename, cpu_model, &err) ] 2.2: or replace cpu_generic_init() which does what 2.1 does + create_cpu(typename) with just create_cpu(machine->cpu_type) as result cpu_name -> cpu_type translation is done using generic machine code one including parsing optional features if supported/present (removes a bunch of duplicated cpu_model parsing code) and default cpu type is defined in an uniform way within machine_class_init callbacks instead of adhoc places in boadr's machine_init code. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1505318697-77161-6-git-send-email-imammedo@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-09-13 19:04:57 +03:00
Object *cpuobj = object_new(cpu_type);
if (!secure) {
object_property_set_bool(cpuobj, false, "has_el3", NULL);
}
if (!virt) {
if (object_property_find(cpuobj, "has_el2", NULL)) {
object_property_set_bool(cpuobj, false, "has_el2", NULL);
}
}
if (object_property_find(cpuobj, "reset-cbar", NULL)) {
object_property_set_int(cpuobj, periphbase,
"reset-cbar", &error_abort);
}
object_property_set_bool(cpuobj, true, "realized", &error_fatal);
}
/* Create the private peripheral devices (including the GIC);
* this must happen after the CPUs are created because a15mpcore_priv
* wires itself up to the CPU's generic_timer gpio out lines.
*/
dev = qdev_create(NULL, privdev);
qdev_prop_set_uint32(dev, "num-cpu", smp_cpus);
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(busdev, 0, periphbase);
/* Interrupts [42:0] are from the motherboard;
* [47:43] are reserved; [63:48] are daughterboard
* peripherals. Note that some documentation numbers
* external interrupts starting from 32 (because there
* are internal interrupts 0..31).
*/
for (n = 0; n < 64; n++) {
pic[n] = qdev_get_gpio_in(dev, n);
}
/* Connect the CPUs to the GIC */
for (n = 0; n < smp_cpus; n++) {
DeviceState *cpudev = DEVICE(qemu_get_cpu(n));
sysbus_connect_irq(busdev, n, qdev_get_gpio_in(cpudev, ARM_CPU_IRQ));
sysbus_connect_irq(busdev, n + smp_cpus,
qdev_get_gpio_in(cpudev, ARM_CPU_FIQ));
sysbus_connect_irq(busdev, n + 2 * smp_cpus,
qdev_get_gpio_in(cpudev, ARM_CPU_VIRQ));
sysbus_connect_irq(busdev, n + 3 * smp_cpus,
qdev_get_gpio_in(cpudev, ARM_CPU_VFIQ));
}
}
static void a9_daughterboard_init(const VexpressMachineState *vms,
ram_addr_t ram_size,
arm: drop intermediate cpu_model -> cpu type parsing and use cpu type directly there are 2 use cases to deal with: 1: fixed CPU models per board/soc 2: boards with user configurable cpu_model and fallback to default cpu_model if user hasn't specified one explicitly For the 1st drop intermediate cpu_model parsing and use const cpu type directly, which replaces: typename = object_class_get_name( cpu_class_by_name(TYPE_ARM_CPU, cpu_model)) object_new(typename) with object_new(FOO_CPU_TYPE_NAME) or cpu_generic_init(BASE_CPU_TYPE, "my cpu model") with cpu_create(FOO_CPU_TYPE_NAME) as result 1st use case doesn't have to invoke not necessary translation and not needed code is removed. For the 2nd 1: set default cpu type with MachineClass::default_cpu_type and 2: use generic cpu_model parsing that done before machine_init() is run and: 2.1: drop custom cpu_model parsing where pattern is: typename = object_class_get_name( cpu_class_by_name(TYPE_ARM_CPU, cpu_model)) [parse_features(typename, cpu_model, &err) ] 2.2: or replace cpu_generic_init() which does what 2.1 does + create_cpu(typename) with just create_cpu(machine->cpu_type) as result cpu_name -> cpu_type translation is done using generic machine code one including parsing optional features if supported/present (removes a bunch of duplicated cpu_model parsing code) and default cpu type is defined in an uniform way within machine_class_init callbacks instead of adhoc places in boadr's machine_init code. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1505318697-77161-6-git-send-email-imammedo@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-09-13 19:04:57 +03:00
const char *cpu_type,
qemu_irq *pic)
{
MemoryRegion *sysmem = get_system_memory();
MemoryRegion *ram = g_new(MemoryRegion, 1);
MemoryRegion *lowram = g_new(MemoryRegion, 1);
ram_addr_t low_ram_size;
if (ram_size > 0x40000000) {
/* 1GB is the maximum the address space permits */
hw/arm: Replace fprintf(stderr, "*\n" with error_report() Replace a large number of the fprintf(stderr, "*\n" calls with error_report(). The functions were renamed with these commands and then compiler issues where manually fixed. find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + Some lines where then manually tweaked to pass checkpatch. The 'qemu: ' prefix was manually removed from the hw/arm/boot.c file. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Cc: qemu-arm@nongnu.org Conversions that aren't followed by exit() dropped, because they might be inappropriate. Also trim trailing punctuation from error messages. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180203084315.20497-3-armbru@redhat.com>
2018-02-03 11:43:03 +03:00
error_report("vexpress-a9: cannot model more than 1GB RAM");
exit(1);
}
memory_region_allocate_system_memory(ram, NULL, "vexpress.highmem",
ram_size);
low_ram_size = ram_size;
if (low_ram_size > 0x4000000) {
low_ram_size = 0x4000000;
}
/* RAM is from 0x60000000 upwards. The bottom 64MB of the
* address space should in theory be remappable to various
* things including ROM or RAM; we always map the RAM there.
*/
memory_region_init_alias(lowram, NULL, "vexpress.lowmem", ram, 0, low_ram_size);
memory_region_add_subregion(sysmem, 0x0, lowram);
memory_region_add_subregion(sysmem, 0x60000000, ram);
/* 0x1e000000 A9MPCore (SCU) private memory region */
init_cpus(cpu_type, TYPE_A9MPCORE_PRIV, 0x1e000000, pic,
vms->secure, vms->virt);
/* Daughterboard peripherals : 0x10020000 .. 0x20000000 */
/* 0x10020000 PL111 CLCD (daughterboard) */
sysbus_create_simple("pl111", 0x10020000, pic[44]);
/* 0x10060000 AXI RAM */
/* 0x100e0000 PL341 Dynamic Memory Controller */
/* 0x100e1000 PL354 Static Memory Controller */
/* 0x100e2000 System Configuration Controller */
sysbus_create_simple("sp804", 0x100e4000, pic[48]);
/* 0x100e5000 SP805 Watchdog module */
/* 0x100e6000 BP147 TrustZone Protection Controller */
/* 0x100e9000 PL301 'Fast' AXI matrix */
/* 0x100ea000 PL301 'Slow' AXI matrix */
/* 0x100ec000 TrustZone Address Space Controller */
/* 0x10200000 CoreSight debug APB */
/* 0x1e00a000 PL310 L2 Cache Controller */
sysbus_create_varargs("l2x0", 0x1e00a000, NULL);
}
/* Voltage values for SYS_CFG_VOLT daughterboard registers;
* values are in microvolts.
*/
static const uint32_t a9_voltages[] = {
1000000, /* VD10 : 1.0V : SoC internal logic voltage */
1000000, /* VD10_S2 : 1.0V : PL310, L2 cache, RAM, non-PL310 logic */
1000000, /* VD10_S3 : 1.0V : Cortex-A9, cores, MPEs, SCU, PL310 logic */
1800000, /* VCC1V8 : 1.8V : DDR2 SDRAM, test chip DDR2 I/O supply */
900000, /* DDR2VTT : 0.9V : DDR2 SDRAM VTT termination voltage */
3300000, /* VCC3V3 : 3.3V : local board supply for misc external logic */
};
/* Reset values for daughterboard oscillators (in Hz) */
static const uint32_t a9_clocks[] = {
45000000, /* AMBA AXI ACLK: 45MHz */
23750000, /* daughterboard CLCD clock: 23.75MHz */
66670000, /* Test chip reference clock: 66.67MHz */
};
static VEDBoardInfo a9_daughterboard = {
.motherboard_map = motherboard_legacy_map,
.loader_start = 0x60000000,
.gic_cpu_if_addr = 0x1e000100,
.proc_id = 0x0c000191,
.num_voltage_sensors = ARRAY_SIZE(a9_voltages),
.voltages = a9_voltages,
.num_clocks = ARRAY_SIZE(a9_clocks),
.clocks = a9_clocks,
.init = a9_daughterboard_init,
};
static void a15_daughterboard_init(const VexpressMachineState *vms,
ram_addr_t ram_size,
arm: drop intermediate cpu_model -> cpu type parsing and use cpu type directly there are 2 use cases to deal with: 1: fixed CPU models per board/soc 2: boards with user configurable cpu_model and fallback to default cpu_model if user hasn't specified one explicitly For the 1st drop intermediate cpu_model parsing and use const cpu type directly, which replaces: typename = object_class_get_name( cpu_class_by_name(TYPE_ARM_CPU, cpu_model)) object_new(typename) with object_new(FOO_CPU_TYPE_NAME) or cpu_generic_init(BASE_CPU_TYPE, "my cpu model") with cpu_create(FOO_CPU_TYPE_NAME) as result 1st use case doesn't have to invoke not necessary translation and not needed code is removed. For the 2nd 1: set default cpu type with MachineClass::default_cpu_type and 2: use generic cpu_model parsing that done before machine_init() is run and: 2.1: drop custom cpu_model parsing where pattern is: typename = object_class_get_name( cpu_class_by_name(TYPE_ARM_CPU, cpu_model)) [parse_features(typename, cpu_model, &err) ] 2.2: or replace cpu_generic_init() which does what 2.1 does + create_cpu(typename) with just create_cpu(machine->cpu_type) as result cpu_name -> cpu_type translation is done using generic machine code one including parsing optional features if supported/present (removes a bunch of duplicated cpu_model parsing code) and default cpu type is defined in an uniform way within machine_class_init callbacks instead of adhoc places in boadr's machine_init code. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1505318697-77161-6-git-send-email-imammedo@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-09-13 19:04:57 +03:00
const char *cpu_type,
qemu_irq *pic)
{
MemoryRegion *sysmem = get_system_memory();
MemoryRegion *ram = g_new(MemoryRegion, 1);
MemoryRegion *sram = g_new(MemoryRegion, 1);
{
/* We have to use a separate 64 bit variable here to avoid the gcc
* "comparison is always false due to limited range of data type"
* warning if we are on a host where ram_addr_t is 32 bits.
*/
uint64_t rsz = ram_size;
if (rsz > (30ULL * 1024 * 1024 * 1024)) {
hw/arm: Replace fprintf(stderr, "*\n" with error_report() Replace a large number of the fprintf(stderr, "*\n" calls with error_report(). The functions were renamed with these commands and then compiler issues where manually fixed. find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + Some lines where then manually tweaked to pass checkpatch. The 'qemu: ' prefix was manually removed from the hw/arm/boot.c file. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Cc: qemu-arm@nongnu.org Conversions that aren't followed by exit() dropped, because they might be inappropriate. Also trim trailing punctuation from error messages. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180203084315.20497-3-armbru@redhat.com>
2018-02-03 11:43:03 +03:00
error_report("vexpress-a15: cannot model more than 30GB RAM");
exit(1);
}
}
memory_region_allocate_system_memory(ram, NULL, "vexpress.highmem",
ram_size);
/* RAM is from 0x80000000 upwards; there is no low-memory alias for it. */
memory_region_add_subregion(sysmem, 0x80000000, ram);
/* 0x2c000000 A15MPCore private memory region (GIC) */
init_cpus(cpu_type, TYPE_A15MPCORE_PRIV, 0x2c000000, pic, vms->secure,
vms->virt);
/* A15 daughterboard peripherals: */
/* 0x20000000: CoreSight interfaces: not modelled */
/* 0x2a000000: PL301 AXI interconnect: not modelled */
/* 0x2a420000: SCC: not modelled */
/* 0x2a430000: system counter: not modelled */
/* 0x2b000000: HDLCD controller: not modelled */
/* 0x2b060000: SP805 watchdog: not modelled */
/* 0x2b0a0000: PL341 dynamic memory controller: not modelled */
/* 0x2e000000: system SRAM */
memory_region_init_ram(sram, NULL, "vexpress.a15sram", 0x10000,
Fix bad error handling after memory_region_init_ram() Symptom: $ qemu-system-x86_64 -m 10000000 Unexpected error in ram_block_add() at /work/armbru/qemu/exec.c:1456: upstream-qemu: cannot set up guest memory 'pc.ram': Cannot allocate memory Aborted (core dumped) Root cause: commit ef701d7 screwed up handling of out-of-memory conditions. Before the commit, we report the error and exit(1), in one place, ram_block_add(). The commit lifts the error handling up the call chain some, to three places. Fine. Except it uses &error_abort in these places, changing the behavior from exit(1) to abort(), and thus undoing the work of commit 3922825 "exec: Don't abort when we can't allocate guest memory". The three places are: * memory_region_init_ram() Commit 4994653 (right after commit ef701d7) lifted the error handling further, through memory_region_init_ram(), multiplying the incorrect use of &error_abort. Later on, imitation of existing (bad) code may have created more. * memory_region_init_ram_ptr() The &error_abort is still there. * memory_region_init_rom_device() Doesn't need fixing, because commit 33e0eb5 (soon after commit ef701d7) lifted the error handling further, and in the process changed it from &error_abort to passing it up the call chain. Correct, because the callers are realize() methods. Fix the error handling after memory_region_init_ram() with a Coccinelle semantic patch: @r@ expression mr, owner, name, size, err; position p; @@ memory_region_init_ram(mr, owner, name, size, ( - &error_abort + &error_fatal | err@p ) ); @script:python@ p << r.p; @@ print "%s:%s:%s" % (p[0].file, p[0].line, p[0].column) When the last argument is &error_abort, it gets replaced by &error_fatal. This is the fix. If the last argument is anything else, its position is reported. This lets us check the fix is complete. Four positions get reported: * ram_backend_memory_alloc() Error is passed up the call chain, ultimately through user_creatable_complete(). As far as I can tell, it's callers all handle the error sanely. * fsl_imx25_realize(), fsl_imx31_realize(), dp8393x_realize() DeviceClass.realize() methods, errors handled sanely further up the call chain. We're good. Test case again behaves: $ qemu-system-x86_64 -m 10000000 qemu-system-x86_64: cannot set up guest memory 'pc.ram': Cannot allocate memory [Exit 1 ] The next commits will repair the rest of commit ef701d7's damage. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1441983105-26376-3-git-send-email-armbru@redhat.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
2015-09-11 17:51:43 +03:00
&error_fatal);
memory_region_add_subregion(sysmem, 0x2e000000, sram);
/* 0x7ffb0000: DMA330 DMA controller: not modelled */
/* 0x7ffd0000: PL354 static memory controller: not modelled */
}
static const uint32_t a15_voltages[] = {
900000, /* Vcore: 0.9V : CPU core voltage */
};
static const uint32_t a15_clocks[] = {
60000000, /* OSCCLK0: 60MHz : CPU_CLK reference */
0, /* OSCCLK1: reserved */
0, /* OSCCLK2: reserved */
0, /* OSCCLK3: reserved */
40000000, /* OSCCLK4: 40MHz : external AXI master clock */
23750000, /* OSCCLK5: 23.75MHz : HDLCD PLL reference */
50000000, /* OSCCLK6: 50MHz : static memory controller clock */
60000000, /* OSCCLK7: 60MHz : SYSCLK reference */
40000000, /* OSCCLK8: 40MHz : DDR2 PLL reference */
};
static VEDBoardInfo a15_daughterboard = {
.motherboard_map = motherboard_aseries_map,
.loader_start = 0x80000000,
.gic_cpu_if_addr = 0x2c002000,
.proc_id = 0x14000237,
.num_voltage_sensors = ARRAY_SIZE(a15_voltages),
.voltages = a15_voltages,
.num_clocks = ARRAY_SIZE(a15_clocks),
.clocks = a15_clocks,
.init = a15_daughterboard_init,
};
static int add_virtio_mmio_node(void *fdt, uint32_t acells, uint32_t scells,
hwaddr addr, hwaddr size, uint32_t intc,
int irq)
{
/* Add a virtio_mmio node to the device tree blob:
* virtio_mmio@ADDRESS {
* compatible = "virtio,mmio";
* reg = <ADDRESS, SIZE>;
* interrupt-parent = <&intc>;
* interrupts = <0, irq, 1>;
* }
* (Note that the format of the interrupts property is dependent on the
* interrupt controller that interrupt-parent points to; these are for
* the ARM GIC and indicate an SPI interrupt, rising-edge-triggered.)
*/
int rc;
char *nodename = g_strdup_printf("/virtio_mmio@%" PRIx64, addr);
rc = qemu_fdt_add_subnode(fdt, nodename);
rc |= qemu_fdt_setprop_string(fdt, nodename,
"compatible", "virtio,mmio");
rc |= qemu_fdt_setprop_sized_cells(fdt, nodename, "reg",
acells, addr, scells, size);
qemu_fdt_setprop_cells(fdt, nodename, "interrupt-parent", intc);
qemu_fdt_setprop_cells(fdt, nodename, "interrupts", 0, irq, 1);
qemu_fdt_setprop(fdt, nodename, "dma-coherent", NULL, 0);
g_free(nodename);
if (rc) {
return -1;
}
return 0;
}
static uint32_t find_int_controller(void *fdt)
{
/* Find the FDT node corresponding to the interrupt controller
* for virtio-mmio devices. We do this by scanning the fdt for
* a node with the right compatibility, since we know there is
* only one GIC on a vexpress board.
* We return the phandle of the node, or 0 if none was found.
*/
const char *compat = "arm,cortex-a9-gic";
int offset;
offset = fdt_node_offset_by_compatible(fdt, -1, compat);
if (offset >= 0) {
return fdt_get_phandle(fdt, offset);
}
return 0;
}
static void vexpress_modify_dtb(const struct arm_boot_info *info, void *fdt)
{
uint32_t acells, scells, intc;
const VEDBoardInfo *daughterboard = (const VEDBoardInfo *)info;
acells = qemu_fdt_getprop_cell(fdt, "/", "#address-cells",
NULL, &error_fatal);
scells = qemu_fdt_getprop_cell(fdt, "/", "#size-cells",
NULL, &error_fatal);
intc = find_int_controller(fdt);
if (!intc) {
/* Not fatal, we just won't provide virtio. This will
* happen with older device tree blobs.
*/
Convert multi-line fprintf() to warn_report() Convert all the multi-line uses of fprintf(stderr, "warning:"..."\n"... to use warn_report() instead. This helps standardise on a single method of printing warnings to the user. All of the warnings were changed using these commands: find ./* -type f -exec sed -i \ 'N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + Indentation fixed up manually afterwards. Some of the lines were manually edited to reduce the line length to below 80 charecters. Some of the lines with newlines in the middle of the string were also manually edit to avoid checkpatch errrors. The #include lines were manually updated to allow the code to compile. Several of the warning messages can be improved after this patch, to keep this patch mechanical this has been moved into a later patch. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Anthony Perard <anthony.perard@citrix.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Yongbok Kim <yongbok.kim@imgtec.com> Cc: Cornelia Huck <cohuck@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Alexander Graf <agraf@suse.de> Cc: Jason Wang <jasowang@redhat.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <5def63849ca8f551630c6f2b45bcb1c482f765a6.1505158760.git.alistair.francis@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-11 22:52:53 +03:00
warn_report("couldn't find interrupt controller in "
"dtb; will not include virtio-mmio devices in the dtb");
} else {
int i;
const hwaddr *map = daughterboard->motherboard_map;
/* We iterate backwards here because adding nodes
* to the dtb puts them in last-first.
*/
for (i = NUM_VIRTIO_TRANSPORTS - 1; i >= 0; i--) {
add_virtio_mmio_node(fdt, acells, scells,
map[VE_VIRTIO] + 0x200 * i,
0x200, intc, 40 + i);
}
}
}
/* Open code a private version of pflash registration since we
* need to set non-default device width for VExpress platform.
*/
static PFlashCFI01 *ve_pflash_cfi01_register(hwaddr base, const char *name,
DriveInfo *di)
{
DeviceState *dev = qdev_create(NULL, TYPE_PFLASH_CFI01);
if (di) {
qdev_prop_set_drive(dev, "drive", blk_by_legacy_dinfo(di),
&error_abort);
}
qdev_prop_set_uint32(dev, "num-blocks",
VEXPRESS_FLASH_SIZE / VEXPRESS_FLASH_SECT_SIZE);
qdev_prop_set_uint64(dev, "sector-length", VEXPRESS_FLASH_SECT_SIZE);
qdev_prop_set_uint8(dev, "width", 4);
qdev_prop_set_uint8(dev, "device-width", 2);
qdev_prop_set_bit(dev, "big-endian", false);
qdev_prop_set_uint16(dev, "id0", 0x89);
qdev_prop_set_uint16(dev, "id1", 0x18);
qdev_prop_set_uint16(dev, "id2", 0x00);
qdev_prop_set_uint16(dev, "id3", 0x00);
qdev_prop_set_string(dev, "name", name);
qdev_init_nofail(dev);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base);
return PFLASH_CFI01(dev);
}
static void vexpress_common_init(MachineState *machine)
{
VexpressMachineState *vms = VEXPRESS_MACHINE(machine);
VexpressMachineClass *vmc = VEXPRESS_MACHINE_GET_CLASS(machine);
VEDBoardInfo *daughterboard = vmc->daughterboard;
DeviceState *dev, *sysctl, *pl041;
qemu_irq pic[64];
uint32_t sys_id;
DriveInfo *dinfo;
PFlashCFI01 *pflash0;
I2CBus *i2c;
ram_addr_t vram_size, sram_size;
MemoryRegion *sysmem = get_system_memory();
MemoryRegion *vram = g_new(MemoryRegion, 1);
MemoryRegion *sram = g_new(MemoryRegion, 1);
MemoryRegion *flashalias = g_new(MemoryRegion, 1);
MemoryRegion *flash0mem;
const hwaddr *map = daughterboard->motherboard_map;
int i;
arm: drop intermediate cpu_model -> cpu type parsing and use cpu type directly there are 2 use cases to deal with: 1: fixed CPU models per board/soc 2: boards with user configurable cpu_model and fallback to default cpu_model if user hasn't specified one explicitly For the 1st drop intermediate cpu_model parsing and use const cpu type directly, which replaces: typename = object_class_get_name( cpu_class_by_name(TYPE_ARM_CPU, cpu_model)) object_new(typename) with object_new(FOO_CPU_TYPE_NAME) or cpu_generic_init(BASE_CPU_TYPE, "my cpu model") with cpu_create(FOO_CPU_TYPE_NAME) as result 1st use case doesn't have to invoke not necessary translation and not needed code is removed. For the 2nd 1: set default cpu type with MachineClass::default_cpu_type and 2: use generic cpu_model parsing that done before machine_init() is run and: 2.1: drop custom cpu_model parsing where pattern is: typename = object_class_get_name( cpu_class_by_name(TYPE_ARM_CPU, cpu_model)) [parse_features(typename, cpu_model, &err) ] 2.2: or replace cpu_generic_init() which does what 2.1 does + create_cpu(typename) with just create_cpu(machine->cpu_type) as result cpu_name -> cpu_type translation is done using generic machine code one including parsing optional features if supported/present (removes a bunch of duplicated cpu_model parsing code) and default cpu type is defined in an uniform way within machine_class_init callbacks instead of adhoc places in boadr's machine_init code. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1505318697-77161-6-git-send-email-imammedo@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-09-13 19:04:57 +03:00
daughterboard->init(vms, machine->ram_size, machine->cpu_type, pic);
/*
* If a bios file was provided, attempt to map it into memory
*/
if (bios_name) {
char *fn;
int image_size;
if (drive_get(IF_PFLASH, 0, 0)) {
error_report("The contents of the first flash device may be "
"specified with -bios or with -drive if=pflash... "
"but you cannot use both options at once");
exit(1);
}
fn = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
if (!fn) {
error_report("Could not find ROM image '%s'", bios_name);
exit(1);
}
image_size = load_image_targphys(fn, map[VE_NORFLASH0],
VEXPRESS_FLASH_SIZE);
g_free(fn);
if (image_size < 0) {
error_report("Could not load ROM image '%s'", bios_name);
exit(1);
}
}
/* Motherboard peripherals: the wiring is the same but the
* addresses vary between the legacy and A-Series memory maps.
*/
sys_id = 0x1190f500;
sysctl = qdev_create(NULL, "realview_sysctl");
qdev_prop_set_uint32(sysctl, "sys_id", sys_id);
qdev_prop_set_uint32(sysctl, "proc_id", daughterboard->proc_id);
qdev_prop_set_uint32(sysctl, "len-db-voltage",
daughterboard->num_voltage_sensors);
for (i = 0; i < daughterboard->num_voltage_sensors; i++) {
char *propname = g_strdup_printf("db-voltage[%d]", i);
qdev_prop_set_uint32(sysctl, propname, daughterboard->voltages[i]);
g_free(propname);
}
qdev_prop_set_uint32(sysctl, "len-db-clock",
daughterboard->num_clocks);
for (i = 0; i < daughterboard->num_clocks; i++) {
char *propname = g_strdup_printf("db-clock[%d]", i);
qdev_prop_set_uint32(sysctl, propname, daughterboard->clocks[i]);
g_free(propname);
}
qdev_init_nofail(sysctl);
sysbus_mmio_map(SYS_BUS_DEVICE(sysctl), 0, map[VE_SYSREGS]);
/* VE_SP810: not modelled */
/* VE_SERIALPCI: not modelled */
pl041 = qdev_create(NULL, "pl041");
qdev_prop_set_uint32(pl041, "nc_fifo_depth", 512);
qdev_init_nofail(pl041);
sysbus_mmio_map(SYS_BUS_DEVICE(pl041), 0, map[VE_PL041]);
sysbus_connect_irq(SYS_BUS_DEVICE(pl041), 0, pic[11]);
dev = sysbus_create_varargs("pl181", map[VE_MMCI], pic[9], pic[10], NULL);
/* Wire up MMC card detect and read-only signals */
qdev_connect_gpio_out(dev, 0,
qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_WPROT));
qdev_connect_gpio_out(dev, 1,
qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_CARDIN));
sysbus_create_simple("pl050_keyboard", map[VE_KMI0], pic[12]);
sysbus_create_simple("pl050_mouse", map[VE_KMI1], pic[13]);
pl011_create(map[VE_UART0], pic[5], serial_hd(0));
pl011_create(map[VE_UART1], pic[6], serial_hd(1));
pl011_create(map[VE_UART2], pic[7], serial_hd(2));
pl011_create(map[VE_UART3], pic[8], serial_hd(3));
sysbus_create_simple("sp804", map[VE_TIMER01], pic[2]);
sysbus_create_simple("sp804", map[VE_TIMER23], pic[3]);
dev = sysbus_create_simple("versatile_i2c", map[VE_SERIALDVI], NULL);
i2c = (I2CBus *)qdev_get_child_bus(dev, "i2c");
i2c_create_slave(i2c, "sii9022", 0x39);
sysbus_create_simple("pl031", map[VE_RTC], pic[4]); /* RTC */
/* VE_COMPACTFLASH: not modelled */
sysbus_create_simple("pl111", map[VE_CLCD], pic[14]);
dinfo = drive_get_next(IF_PFLASH);
pflash0 = ve_pflash_cfi01_register(map[VE_NORFLASH0], "vexpress.flash0",
dinfo);
if (!pflash0) {
hw/arm: Replace fprintf(stderr, "*\n" with error_report() Replace a large number of the fprintf(stderr, "*\n" calls with error_report(). The functions were renamed with these commands and then compiler issues where manually fixed. find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + Some lines where then manually tweaked to pass checkpatch. The 'qemu: ' prefix was manually removed from the hw/arm/boot.c file. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Cc: qemu-arm@nongnu.org Conversions that aren't followed by exit() dropped, because they might be inappropriate. Also trim trailing punctuation from error messages. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180203084315.20497-3-armbru@redhat.com>
2018-02-03 11:43:03 +03:00
error_report("vexpress: error registering flash 0");
exit(1);
}
if (map[VE_NORFLASHALIAS] != -1) {
/* Map flash 0 as an alias into low memory */
flash0mem = sysbus_mmio_get_region(SYS_BUS_DEVICE(pflash0), 0);
memory_region_init_alias(flashalias, NULL, "vexpress.flashalias",
flash0mem, 0, VEXPRESS_FLASH_SIZE);
memory_region_add_subregion(sysmem, map[VE_NORFLASHALIAS], flashalias);
}
dinfo = drive_get_next(IF_PFLASH);
if (!ve_pflash_cfi01_register(map[VE_NORFLASH1], "vexpress.flash1",
dinfo)) {
hw/arm: Replace fprintf(stderr, "*\n" with error_report() Replace a large number of the fprintf(stderr, "*\n" calls with error_report(). The functions were renamed with these commands and then compiler issues where manually fixed. find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + Some lines where then manually tweaked to pass checkpatch. The 'qemu: ' prefix was manually removed from the hw/arm/boot.c file. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Cc: qemu-arm@nongnu.org Conversions that aren't followed by exit() dropped, because they might be inappropriate. Also trim trailing punctuation from error messages. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180203084315.20497-3-armbru@redhat.com>
2018-02-03 11:43:03 +03:00
error_report("vexpress: error registering flash 1");
exit(1);
}
sram_size = 0x2000000;
memory_region_init_ram(sram, NULL, "vexpress.sram", sram_size,
Fix bad error handling after memory_region_init_ram() Symptom: $ qemu-system-x86_64 -m 10000000 Unexpected error in ram_block_add() at /work/armbru/qemu/exec.c:1456: upstream-qemu: cannot set up guest memory 'pc.ram': Cannot allocate memory Aborted (core dumped) Root cause: commit ef701d7 screwed up handling of out-of-memory conditions. Before the commit, we report the error and exit(1), in one place, ram_block_add(). The commit lifts the error handling up the call chain some, to three places. Fine. Except it uses &error_abort in these places, changing the behavior from exit(1) to abort(), and thus undoing the work of commit 3922825 "exec: Don't abort when we can't allocate guest memory". The three places are: * memory_region_init_ram() Commit 4994653 (right after commit ef701d7) lifted the error handling further, through memory_region_init_ram(), multiplying the incorrect use of &error_abort. Later on, imitation of existing (bad) code may have created more. * memory_region_init_ram_ptr() The &error_abort is still there. * memory_region_init_rom_device() Doesn't need fixing, because commit 33e0eb5 (soon after commit ef701d7) lifted the error handling further, and in the process changed it from &error_abort to passing it up the call chain. Correct, because the callers are realize() methods. Fix the error handling after memory_region_init_ram() with a Coccinelle semantic patch: @r@ expression mr, owner, name, size, err; position p; @@ memory_region_init_ram(mr, owner, name, size, ( - &error_abort + &error_fatal | err@p ) ); @script:python@ p << r.p; @@ print "%s:%s:%s" % (p[0].file, p[0].line, p[0].column) When the last argument is &error_abort, it gets replaced by &error_fatal. This is the fix. If the last argument is anything else, its position is reported. This lets us check the fix is complete. Four positions get reported: * ram_backend_memory_alloc() Error is passed up the call chain, ultimately through user_creatable_complete(). As far as I can tell, it's callers all handle the error sanely. * fsl_imx25_realize(), fsl_imx31_realize(), dp8393x_realize() DeviceClass.realize() methods, errors handled sanely further up the call chain. We're good. Test case again behaves: $ qemu-system-x86_64 -m 10000000 qemu-system-x86_64: cannot set up guest memory 'pc.ram': Cannot allocate memory [Exit 1 ] The next commits will repair the rest of commit ef701d7's damage. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1441983105-26376-3-git-send-email-armbru@redhat.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
2015-09-11 17:51:43 +03:00
&error_fatal);
memory_region_add_subregion(sysmem, map[VE_SRAM], sram);
vram_size = 0x800000;
memory_region_init_ram(vram, NULL, "vexpress.vram", vram_size,
Fix bad error handling after memory_region_init_ram() Symptom: $ qemu-system-x86_64 -m 10000000 Unexpected error in ram_block_add() at /work/armbru/qemu/exec.c:1456: upstream-qemu: cannot set up guest memory 'pc.ram': Cannot allocate memory Aborted (core dumped) Root cause: commit ef701d7 screwed up handling of out-of-memory conditions. Before the commit, we report the error and exit(1), in one place, ram_block_add(). The commit lifts the error handling up the call chain some, to three places. Fine. Except it uses &error_abort in these places, changing the behavior from exit(1) to abort(), and thus undoing the work of commit 3922825 "exec: Don't abort when we can't allocate guest memory". The three places are: * memory_region_init_ram() Commit 4994653 (right after commit ef701d7) lifted the error handling further, through memory_region_init_ram(), multiplying the incorrect use of &error_abort. Later on, imitation of existing (bad) code may have created more. * memory_region_init_ram_ptr() The &error_abort is still there. * memory_region_init_rom_device() Doesn't need fixing, because commit 33e0eb5 (soon after commit ef701d7) lifted the error handling further, and in the process changed it from &error_abort to passing it up the call chain. Correct, because the callers are realize() methods. Fix the error handling after memory_region_init_ram() with a Coccinelle semantic patch: @r@ expression mr, owner, name, size, err; position p; @@ memory_region_init_ram(mr, owner, name, size, ( - &error_abort + &error_fatal | err@p ) ); @script:python@ p << r.p; @@ print "%s:%s:%s" % (p[0].file, p[0].line, p[0].column) When the last argument is &error_abort, it gets replaced by &error_fatal. This is the fix. If the last argument is anything else, its position is reported. This lets us check the fix is complete. Four positions get reported: * ram_backend_memory_alloc() Error is passed up the call chain, ultimately through user_creatable_complete(). As far as I can tell, it's callers all handle the error sanely. * fsl_imx25_realize(), fsl_imx31_realize(), dp8393x_realize() DeviceClass.realize() methods, errors handled sanely further up the call chain. We're good. Test case again behaves: $ qemu-system-x86_64 -m 10000000 qemu-system-x86_64: cannot set up guest memory 'pc.ram': Cannot allocate memory [Exit 1 ] The next commits will repair the rest of commit ef701d7's damage. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1441983105-26376-3-git-send-email-armbru@redhat.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
2015-09-11 17:51:43 +03:00
&error_fatal);
memory_region_add_subregion(sysmem, map[VE_VIDEORAM], vram);
/* 0x4e000000 LAN9118 Ethernet */
if (nd_table[0].used) {
lan9118_init(&nd_table[0], map[VE_ETHERNET], pic[15]);
}
/* VE_USB: not modelled */
/* VE_DAPROM: not modelled */
/* Create mmio transports, so the user can create virtio backends
* (which will be automatically plugged in to the transports). If
* no backend is created the transport will just sit harmlessly idle.
*/
for (i = 0; i < NUM_VIRTIO_TRANSPORTS; i++) {
sysbus_create_simple("virtio-mmio", map[VE_VIRTIO] + 0x200 * i,
pic[40 + i]);
}
daughterboard->bootinfo.ram_size = machine->ram_size;
daughterboard->bootinfo.kernel_filename = machine->kernel_filename;
daughterboard->bootinfo.kernel_cmdline = machine->kernel_cmdline;
daughterboard->bootinfo.initrd_filename = machine->initrd_filename;
daughterboard->bootinfo.nb_cpus = smp_cpus;
daughterboard->bootinfo.board_id = VEXPRESS_BOARD_ID;
daughterboard->bootinfo.loader_start = daughterboard->loader_start;
daughterboard->bootinfo.smp_loader_start = map[VE_SRAM];
daughterboard->bootinfo.smp_bootreg_addr = map[VE_SYSREGS] + 0x30;
daughterboard->bootinfo.gic_cpu_if_addr = daughterboard->gic_cpu_if_addr;
daughterboard->bootinfo.modify_dtb = vexpress_modify_dtb;
/* When booting Linux we should be in secure state if the CPU has one. */
daughterboard->bootinfo.secure_boot = vms->secure;
arm_load_kernel(ARM_CPU(first_cpu), &daughterboard->bootinfo);
}
static bool vexpress_get_secure(Object *obj, Error **errp)
{
VexpressMachineState *vms = VEXPRESS_MACHINE(obj);
return vms->secure;
}
static void vexpress_set_secure(Object *obj, bool value, Error **errp)
{
VexpressMachineState *vms = VEXPRESS_MACHINE(obj);
vms->secure = value;
}
static bool vexpress_get_virt(Object *obj, Error **errp)
{
VexpressMachineState *vms = VEXPRESS_MACHINE(obj);
return vms->virt;
}
static void vexpress_set_virt(Object *obj, bool value, Error **errp)
{
VexpressMachineState *vms = VEXPRESS_MACHINE(obj);
vms->virt = value;
}
static void vexpress_instance_init(Object *obj)
{
VexpressMachineState *vms = VEXPRESS_MACHINE(obj);
/* EL3 is enabled by default on vexpress */
vms->secure = true;
object_property_add_bool(obj, "secure", vexpress_get_secure,
vexpress_set_secure, NULL);
object_property_set_description(obj, "secure",
"Set on/off to enable/disable the ARM "
"Security Extensions (TrustZone)",
NULL);
}
static void vexpress_a15_instance_init(Object *obj)
{
VexpressMachineState *vms = VEXPRESS_MACHINE(obj);
/*
* For the vexpress-a15, EL2 is by default enabled if EL3 is,
* but can also be specifically set to on or off.
*/
vms->virt = true;
object_property_add_bool(obj, "virtualization", vexpress_get_virt,
vexpress_set_virt, NULL);
object_property_set_description(obj, "virtualization",
"Set on/off to enable/disable the ARM "
"Virtualization Extensions "
"(defaults to same as 'secure')",
NULL);
}
static void vexpress_a9_instance_init(Object *obj)
{
VexpressMachineState *vms = VEXPRESS_MACHINE(obj);
/* The A9 doesn't have the virt extensions */
vms->virt = false;
}
static void vexpress_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
mc->desc = "ARM Versatile Express";
mc->init = vexpress_common_init;
mc->max_cpus = 4;
mc->ignore_memory_transaction_failures = true;
}
static void vexpress_a9_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
VexpressMachineClass *vmc = VEXPRESS_MACHINE_CLASS(oc);
mc->desc = "ARM Versatile Express for Cortex-A9";
arm: drop intermediate cpu_model -> cpu type parsing and use cpu type directly there are 2 use cases to deal with: 1: fixed CPU models per board/soc 2: boards with user configurable cpu_model and fallback to default cpu_model if user hasn't specified one explicitly For the 1st drop intermediate cpu_model parsing and use const cpu type directly, which replaces: typename = object_class_get_name( cpu_class_by_name(TYPE_ARM_CPU, cpu_model)) object_new(typename) with object_new(FOO_CPU_TYPE_NAME) or cpu_generic_init(BASE_CPU_TYPE, "my cpu model") with cpu_create(FOO_CPU_TYPE_NAME) as result 1st use case doesn't have to invoke not necessary translation and not needed code is removed. For the 2nd 1: set default cpu type with MachineClass::default_cpu_type and 2: use generic cpu_model parsing that done before machine_init() is run and: 2.1: drop custom cpu_model parsing where pattern is: typename = object_class_get_name( cpu_class_by_name(TYPE_ARM_CPU, cpu_model)) [parse_features(typename, cpu_model, &err) ] 2.2: or replace cpu_generic_init() which does what 2.1 does + create_cpu(typename) with just create_cpu(machine->cpu_type) as result cpu_name -> cpu_type translation is done using generic machine code one including parsing optional features if supported/present (removes a bunch of duplicated cpu_model parsing code) and default cpu type is defined in an uniform way within machine_class_init callbacks instead of adhoc places in boadr's machine_init code. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1505318697-77161-6-git-send-email-imammedo@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-09-13 19:04:57 +03:00
mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a9");
vmc->daughterboard = &a9_daughterboard;
}
static void vexpress_a15_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
VexpressMachineClass *vmc = VEXPRESS_MACHINE_CLASS(oc);
mc->desc = "ARM Versatile Express for Cortex-A15";
arm: drop intermediate cpu_model -> cpu type parsing and use cpu type directly there are 2 use cases to deal with: 1: fixed CPU models per board/soc 2: boards with user configurable cpu_model and fallback to default cpu_model if user hasn't specified one explicitly For the 1st drop intermediate cpu_model parsing and use const cpu type directly, which replaces: typename = object_class_get_name( cpu_class_by_name(TYPE_ARM_CPU, cpu_model)) object_new(typename) with object_new(FOO_CPU_TYPE_NAME) or cpu_generic_init(BASE_CPU_TYPE, "my cpu model") with cpu_create(FOO_CPU_TYPE_NAME) as result 1st use case doesn't have to invoke not necessary translation and not needed code is removed. For the 2nd 1: set default cpu type with MachineClass::default_cpu_type and 2: use generic cpu_model parsing that done before machine_init() is run and: 2.1: drop custom cpu_model parsing where pattern is: typename = object_class_get_name( cpu_class_by_name(TYPE_ARM_CPU, cpu_model)) [parse_features(typename, cpu_model, &err) ] 2.2: or replace cpu_generic_init() which does what 2.1 does + create_cpu(typename) with just create_cpu(machine->cpu_type) as result cpu_name -> cpu_type translation is done using generic machine code one including parsing optional features if supported/present (removes a bunch of duplicated cpu_model parsing code) and default cpu type is defined in an uniform way within machine_class_init callbacks instead of adhoc places in boadr's machine_init code. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1505318697-77161-6-git-send-email-imammedo@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-09-13 19:04:57 +03:00
mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a15");
vmc->daughterboard = &a15_daughterboard;
}
static const TypeInfo vexpress_info = {
.name = TYPE_VEXPRESS_MACHINE,
.parent = TYPE_MACHINE,
.abstract = true,
.instance_size = sizeof(VexpressMachineState),
.instance_init = vexpress_instance_init,
.class_size = sizeof(VexpressMachineClass),
.class_init = vexpress_class_init,
};
static const TypeInfo vexpress_a9_info = {
.name = TYPE_VEXPRESS_A9_MACHINE,
.parent = TYPE_VEXPRESS_MACHINE,
.class_init = vexpress_a9_class_init,
.instance_init = vexpress_a9_instance_init,
};
static const TypeInfo vexpress_a15_info = {
.name = TYPE_VEXPRESS_A15_MACHINE,
.parent = TYPE_VEXPRESS_MACHINE,
.class_init = vexpress_a15_class_init,
.instance_init = vexpress_a15_instance_init,
};
static void vexpress_machine_init(void)
{
type_register_static(&vexpress_info);
type_register_static(&vexpress_a9_info);
type_register_static(&vexpress_a15_info);
}
type_init(vexpress_machine_init);