qemu/target/ppc/kvm.c

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

2967 lines
79 KiB
C
Raw Normal View History

/*
* PowerPC implementation of KVM hooks
*
* Copyright IBM Corp. 2007
* Copyright (C) 2011 Freescale Semiconductor, Inc.
*
* Authors:
* Jerone Young <jyoung5@us.ibm.com>
* Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
* Hollis Blanchard <hollisb@us.ibm.com>
*
* This work is licensed under the terms of the GNU GPL, version 2 or later.
* See the COPYING file in the top-level directory.
*
*/
#include "qemu/osdep.h"
#include <dirent.h>
#include <sys/ioctl.h>
ppc64: Rudimentary Support for extra page sizes on server CPUs More recent Power server chips (i.e. based on the 64 bit hash MMU) support more than just the traditional 4k and 16M page sizes. This can get quite complicated, because which page sizes are supported, which combinations are supported within an MMU segment and how these page sizes are encoded both in the SLB entry and the hash PTE can vary depending on the CPU model (they are not specified by the architecture). In addition the firmware or hypervisor may not permit use of certain page sizes, for various reasons. Whether various page sizes are supported on KVM, for example, depends on whether the PR or HV variant of KVM is in use, and on the page size of the memory backing the guest's RAM. This patch adds information to the CPUState and cpu defs to describe the supported page sizes and encodings. Since TCG does not yet support any extended page sizes, we just set this to NULL in the static CPU definitions, expanding this to the default 4k and 16M page sizes when we initialize the cpu state. When using KVM, however, we instead determine available page sizes using the new KVM_PPC_GET_SMMU_INFO call. For old kernels without that call, we use some defaults, with some guesswork which should do the right thing for existing HV and PR implementations. The fallback might not be correct for future versions, but that's ok, because they'll have KVM_PPC_GET_SMMU_INFO. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-06-18 23:56:25 +04:00
#include <sys/vfs.h>
#include <linux/kvm.h>
#include "qapi/error.h"
#include "qemu/error-report.h"
#include "cpu.h"
#include "cpu-models.h"
#include "qemu/timer.h"
#include "sysemu/hw_accel.h"
#include "kvm_ppc.h"
#include "sysemu/cpus.h"
#include "sysemu/device_tree.h"
#include "mmu-hash64.h"
#include "hw/ppc/spapr.h"
#include "hw/ppc/spapr_cpu_core.h"
#include "hw/hw.h"
#include "hw/ppc/ppc.h"
#include "migration/qemu-file-types.h"
#include "sysemu/watchdog.h"
#include "trace.h"
#include "exec/gdbstub.h"
#include "exec/memattrs.h"
#include "exec/ram_addr.h"
#include "sysemu/hostmem.h"
#include "qemu/cutils.h"
#include "qemu/main-loop.h"
#include "qemu/mmap-alloc.h"
#include "elf.h"
#include "sysemu/kvm_int.h"
#define PROC_DEVTREE_CPU "/proc/device-tree/cpus/"
#define DEBUG_RETURN_GUEST 0
#define DEBUG_RETURN_GDB 1
const KVMCapabilityInfo kvm_arch_required_capabilities[] = {
KVM_CAP_LAST_INFO
};
static int cap_interrupt_unset;
static int cap_segstate;
static int cap_booke_sregs;
static int cap_ppc_smt;
static int cap_ppc_smt_possible;
static int cap_spapr_tce;
static int cap_spapr_tce_64;
static int cap_spapr_multitce;
spapr_iommu: Make in-kernel TCE table optional POWER KVM supports an KVM_CAP_SPAPR_TCE capability which allows allocating TCE tables in the host kernel memory and handle H_PUT_TCE requests targeted to specific LIOBN (logical bus number) right in the host without switching to QEMU. At the moment this is used for emulated devices only and the handler only puts TCE to the table. If the in-kernel H_PUT_TCE handler finds a LIOBN and corresponding table, it will put a TCE to the table and complete hypercall execution. The user space will not be notified. Upcoming VFIO support is going to use the same sPAPRTCETable device class so KVM_CAP_SPAPR_TCE is going to be used as well. That means that TCE tables for VFIO are going to be allocated in the host as well. However VFIO operates with real IOMMU tables and simple copying of a TCE to the real hardware TCE table will not work as guest physical to host physical address translation is requited. So until the host kernel gets VFIO support for H_PUT_TCE, we better not to register VFIO's TCE in the host. This adds a place holder for KVM_CAP_SPAPR_TCE_VFIO capability. It is not in upstream yet and being discussed so now it is always false which means that in-kernel VFIO acceleration is not supported. This adds a bool @vfio_accel flag to the sPAPRTCETable device telling that sPAPRTCETable should not try allocating TCE table in the host kernel for VFIO. The flag is false now as at the moment there is no VFIO. This adds an vfio_accel parameter to spapr_tce_new_table(), the semantic is the same. Since there is only emulated PCI and VIO now, the flag is set to false. Upcoming VFIO support will set it to true. This is a preparation patch so no change in behaviour is expected Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-10 09:39:21 +04:00
static int cap_spapr_vfio;
ppc: Make kvm_arch_put_registers() put *all* the registers At least when invoked with high enough 'level' arguments, kvm_arch_put_registers() is supposed to copy essentially all the cpu state as encoded in qemu's internal structures into the kvm state. Currently the ppc version does not do this - it never calls KVM_SET_SREGS, for example, and therefore never sets the SDR1 and various other important though rarely changed registers. Instead, the code paths which need to set these registers need to explicitly make (conditional) kvm calls which transfer the changes to kvm. This breaks the usual model of handling state updates in qemu, where code just changes the internal model and has it flushed out to kvm automatically at some later point. This patch fixes this for Book S ppc CPUs by adding a suitable call to KVM_SET_SREGS and als to KVM_SET_ONE_REG to set the HIOR (the only register that is set with that call so far). This lets us remove the hacks to explicitly set these registers from the kvmppc_set_papr() function. The problem still exists for Book E CPUs (which use a different version of the kvm_sregs structure). But fixing that has some complications of its own so can be left to another day. Lkewise, there is still some ugly code for setting the PVR through special calls to SET_SREGS which is left in for now. The PVR needs to be set especially early because it can affect what other features are available on the CPU, so I need to do more thinking to see if it can be integrated into the normal paths or not. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-09-12 20:57:09 +04:00
static int cap_hior;
static int cap_one_reg;
static int cap_epr;
static int cap_ppc_watchdog;
static int cap_papr;
static int cap_htab_fd;
static int cap_fixup_hcalls;
static int cap_htm; /* Hardware transactional memory support */
static int cap_mmu_radix;
static int cap_mmu_hash_v3;
static int cap_xive;
static int cap_resize_hpt;
target/ppc: 'PVR != host PVR' in KVM_SET_SREGS workaround Commit d5fc133eed ("ppc: Rework CPU compatibility testing across migration") changed the way cpu_post_load behaves with the PVR setting, causing an unexpected bug in KVM-HV migrations between hosts that are compatible (POWER8 and POWER8E, for example). Even with pvr_match() returning true, the guest freezes right after cpu_post_load. The reason is that the guest kernel can't handle a different PVR value other that the running host in KVM_SET_SREGS. In [1] it was discussed the possibility of a new KVM capability that would indicate that the guest kernel can handle a different PVR in KVM_SET_SREGS. Even if such feature is implemented, there is still the problem with older kernels that will not have this capability and will fail to migrate. This patch implements a workaround for that scenario. If running with KVM, check if the guest kernel does not have the capability (named here as 'cap_ppc_pvr_compat'). If it doesn't, calls kvmppc_is_pr() to see if the guest is running in KVM-HV. If all this happens, set env->spr[SPR_PVR] to the same value as the current host PVR. This ensures that we allow migrations with 'close enough' PVRs to still work in KVM-HV but also makes the code ready for this new KVM capability when it is done. A new function called 'kvmppc_pvr_workaround_required' was created to encapsulate the conditions said above and to avoid calling too many kvm.c internals inside cpu_post_load. [1] https://lists.gnu.org/archive/html/qemu-ppc/2017-06/msg00503.html Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com> [dwg: Fix for the case of using TCG on a PPC host] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-08-09 23:43:46 +03:00
static int cap_ppc_pvr_compat;
static int cap_ppc_safe_cache;
static int cap_ppc_safe_bounds_check;
static int cap_ppc_safe_indirect_branch;
static int cap_ppc_count_cache_flush_assist;
static int cap_ppc_nested_kvm_hv;
static int cap_large_decr;
static int cap_fwnmi;
static int cap_rpt_invalidate;
spapr: Add SPAPR_CAP_AIL_MODE_3 for AIL mode 3 support for H_SET_MODE hcall The behaviour of the Address Translation Mode on Interrupt resource is not consistently supported by all CPU versions or all KVM versions: KVM HV does not support mode 2, and does not support mode 3 on POWER7 or early POWER9 processesors. KVM PR only supports mode 0. TCG supports all modes (0, 2, 3) on CPUs with support for the corresonding LPCR[AIL] mode. This leads to inconsistencies in guest behaviour and could cause problems migrating guests. This was not noticable for Linux guests for a long time because the kernel only uses modes 0 and 3, and it used to consider AIL-3 to be advisory in that it would always keep the AIL-0 vectors around, so it did not matter whether or not interrupts were delivered according to the AIL mode. Recent Linux guests depend on AIL mode 3 working as specified in order to support the SCV facility interrupt. If AIL-3 can not be provided, then H_SET_MODE must return an error to Linux so it can disable the SCV facility (failure to do so can lead to userspace being able to crash the guest kernel). Add the ail-mode-3 capability to specify that AIL-3 is supported. AIL-0 is implied as the baseline, and AIL-2 is no longer supported by spapr. AIL-2 is not known to be used by any software, but support in TCG could be restored with an ail-mode-2 capability quite easily if a regression is reported. Modify the H_SET_MODE Address Translation Mode on Interrupt resource handler to check capabilities and correctly return error if not supported. KVM has a cap to advertise support for AIL-3. Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Message-Id: <20230515160216.394612-1-npiggin@gmail.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2023-05-15 19:02:16 +03:00
static int cap_ail_mode_3;
static uint32_t debug_inst_opcode;
/*
* Check whether we are running with KVM-PR (instead of KVM-HV). This
* should only be used for fallback tests - generally we should use
* explicit capabilities for the features we want, rather than
* assuming what is/isn't available depending on the KVM variant.
*/
static bool kvmppc_is_pr(KVMState *ks)
{
/* Assume KVM-PR if the GET_PVINFO capability is available */
return kvm_vm_check_extension(ks, KVM_CAP_PPC_GET_PVINFO) != 0;
}
static int kvm_ppc_register_host_cpu_type(void);
static void kvmppc_get_cpu_characteristics(KVMState *s);
static int kvmppc_get_dec_bits(void);
int kvm_arch_get_default_type(MachineState *ms)
{
return 0;
}
int kvm_arch_init(MachineState *ms, KVMState *s)
{
cap_interrupt_unset = kvm_check_extension(s, KVM_CAP_PPC_UNSET_IRQ);
cap_segstate = kvm_check_extension(s, KVM_CAP_PPC_SEGSTATE);
cap_booke_sregs = kvm_check_extension(s, KVM_CAP_PPC_BOOKE_SREGS);
cap_ppc_smt_possible = kvm_vm_check_extension(s, KVM_CAP_PPC_SMT_POSSIBLE);
cap_spapr_tce = kvm_check_extension(s, KVM_CAP_SPAPR_TCE);
cap_spapr_tce_64 = kvm_check_extension(s, KVM_CAP_SPAPR_TCE_64);
cap_spapr_multitce = kvm_check_extension(s, KVM_CAP_SPAPR_MULTITCE);
cap_spapr_vfio = kvm_vm_check_extension(s, KVM_CAP_SPAPR_TCE_VFIO);
cap_one_reg = kvm_check_extension(s, KVM_CAP_ONE_REG);
ppc: Make kvm_arch_put_registers() put *all* the registers At least when invoked with high enough 'level' arguments, kvm_arch_put_registers() is supposed to copy essentially all the cpu state as encoded in qemu's internal structures into the kvm state. Currently the ppc version does not do this - it never calls KVM_SET_SREGS, for example, and therefore never sets the SDR1 and various other important though rarely changed registers. Instead, the code paths which need to set these registers need to explicitly make (conditional) kvm calls which transfer the changes to kvm. This breaks the usual model of handling state updates in qemu, where code just changes the internal model and has it flushed out to kvm automatically at some later point. This patch fixes this for Book S ppc CPUs by adding a suitable call to KVM_SET_SREGS and als to KVM_SET_ONE_REG to set the HIOR (the only register that is set with that call so far). This lets us remove the hacks to explicitly set these registers from the kvmppc_set_papr() function. The problem still exists for Book E CPUs (which use a different version of the kvm_sregs structure). But fixing that has some complications of its own so can be left to another day. Lkewise, there is still some ugly code for setting the PVR through special calls to SET_SREGS which is left in for now. The PVR needs to be set especially early because it can affect what other features are available on the CPU, so I need to do more thinking to see if it can be integrated into the normal paths or not. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-09-12 20:57:09 +04:00
cap_hior = kvm_check_extension(s, KVM_CAP_PPC_HIOR);
cap_epr = kvm_check_extension(s, KVM_CAP_PPC_EPR);
cap_ppc_watchdog = kvm_check_extension(s, KVM_CAP_PPC_BOOKE_WATCHDOG);
/*
* Note: we don't set cap_papr here, because this capability is
* only activated after this by kvmppc_set_papr()
*/
cap_htab_fd = kvm_vm_check_extension(s, KVM_CAP_PPC_HTAB_FD);
cap_fixup_hcalls = kvm_check_extension(s, KVM_CAP_PPC_FIXUP_HCALL);
cap_ppc_smt = kvm_vm_check_extension(s, KVM_CAP_PPC_SMT);
cap_htm = kvm_vm_check_extension(s, KVM_CAP_PPC_HTM);
cap_mmu_radix = kvm_vm_check_extension(s, KVM_CAP_PPC_MMU_RADIX);
cap_mmu_hash_v3 = kvm_vm_check_extension(s, KVM_CAP_PPC_MMU_HASH_V3);
cap_xive = kvm_vm_check_extension(s, KVM_CAP_PPC_IRQ_XIVE);
cap_resize_hpt = kvm_vm_check_extension(s, KVM_CAP_SPAPR_RESIZE_HPT);
kvmppc_get_cpu_characteristics(s);
cap_ppc_nested_kvm_hv = kvm_vm_check_extension(s, KVM_CAP_PPC_NESTED_HV);
cap_large_decr = kvmppc_get_dec_bits();
cap_fwnmi = kvm_vm_check_extension(s, KVM_CAP_PPC_FWNMI);
target/ppc: 'PVR != host PVR' in KVM_SET_SREGS workaround Commit d5fc133eed ("ppc: Rework CPU compatibility testing across migration") changed the way cpu_post_load behaves with the PVR setting, causing an unexpected bug in KVM-HV migrations between hosts that are compatible (POWER8 and POWER8E, for example). Even with pvr_match() returning true, the guest freezes right after cpu_post_load. The reason is that the guest kernel can't handle a different PVR value other that the running host in KVM_SET_SREGS. In [1] it was discussed the possibility of a new KVM capability that would indicate that the guest kernel can handle a different PVR in KVM_SET_SREGS. Even if such feature is implemented, there is still the problem with older kernels that will not have this capability and will fail to migrate. This patch implements a workaround for that scenario. If running with KVM, check if the guest kernel does not have the capability (named here as 'cap_ppc_pvr_compat'). If it doesn't, calls kvmppc_is_pr() to see if the guest is running in KVM-HV. If all this happens, set env->spr[SPR_PVR] to the same value as the current host PVR. This ensures that we allow migrations with 'close enough' PVRs to still work in KVM-HV but also makes the code ready for this new KVM capability when it is done. A new function called 'kvmppc_pvr_workaround_required' was created to encapsulate the conditions said above and to avoid calling too many kvm.c internals inside cpu_post_load. [1] https://lists.gnu.org/archive/html/qemu-ppc/2017-06/msg00503.html Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com> [dwg: Fix for the case of using TCG on a PPC host] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-08-09 23:43:46 +03:00
/*
* Note: setting it to false because there is not such capability
* in KVM at this moment.
*
* TODO: call kvm_vm_check_extension() with the right capability
* after the kernel starts implementing it.
*/
target/ppc: 'PVR != host PVR' in KVM_SET_SREGS workaround Commit d5fc133eed ("ppc: Rework CPU compatibility testing across migration") changed the way cpu_post_load behaves with the PVR setting, causing an unexpected bug in KVM-HV migrations between hosts that are compatible (POWER8 and POWER8E, for example). Even with pvr_match() returning true, the guest freezes right after cpu_post_load. The reason is that the guest kernel can't handle a different PVR value other that the running host in KVM_SET_SREGS. In [1] it was discussed the possibility of a new KVM capability that would indicate that the guest kernel can handle a different PVR in KVM_SET_SREGS. Even if such feature is implemented, there is still the problem with older kernels that will not have this capability and will fail to migrate. This patch implements a workaround for that scenario. If running with KVM, check if the guest kernel does not have the capability (named here as 'cap_ppc_pvr_compat'). If it doesn't, calls kvmppc_is_pr() to see if the guest is running in KVM-HV. If all this happens, set env->spr[SPR_PVR] to the same value as the current host PVR. This ensures that we allow migrations with 'close enough' PVRs to still work in KVM-HV but also makes the code ready for this new KVM capability when it is done. A new function called 'kvmppc_pvr_workaround_required' was created to encapsulate the conditions said above and to avoid calling too many kvm.c internals inside cpu_post_load. [1] https://lists.gnu.org/archive/html/qemu-ppc/2017-06/msg00503.html Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com> [dwg: Fix for the case of using TCG on a PPC host] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-08-09 23:43:46 +03:00
cap_ppc_pvr_compat = false;
if (!kvm_check_extension(s, KVM_CAP_PPC_IRQ_LEVEL)) {
error_report("KVM: Host kernel doesn't have level irq capability");
exit(1);
}
cap_rpt_invalidate = kvm_vm_check_extension(s, KVM_CAP_PPC_RPT_INVALIDATE);
spapr: Add SPAPR_CAP_AIL_MODE_3 for AIL mode 3 support for H_SET_MODE hcall The behaviour of the Address Translation Mode on Interrupt resource is not consistently supported by all CPU versions or all KVM versions: KVM HV does not support mode 2, and does not support mode 3 on POWER7 or early POWER9 processesors. KVM PR only supports mode 0. TCG supports all modes (0, 2, 3) on CPUs with support for the corresonding LPCR[AIL] mode. This leads to inconsistencies in guest behaviour and could cause problems migrating guests. This was not noticable for Linux guests for a long time because the kernel only uses modes 0 and 3, and it used to consider AIL-3 to be advisory in that it would always keep the AIL-0 vectors around, so it did not matter whether or not interrupts were delivered according to the AIL mode. Recent Linux guests depend on AIL mode 3 working as specified in order to support the SCV facility interrupt. If AIL-3 can not be provided, then H_SET_MODE must return an error to Linux so it can disable the SCV facility (failure to do so can lead to userspace being able to crash the guest kernel). Add the ail-mode-3 capability to specify that AIL-3 is supported. AIL-0 is implied as the baseline, and AIL-2 is no longer supported by spapr. AIL-2 is not known to be used by any software, but support in TCG could be restored with an ail-mode-2 capability quite easily if a regression is reported. Modify the H_SET_MODE Address Translation Mode on Interrupt resource handler to check capabilities and correctly return error if not supported. KVM has a cap to advertise support for AIL-3. Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Message-Id: <20230515160216.394612-1-npiggin@gmail.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2023-05-15 19:02:16 +03:00
cap_ail_mode_3 = kvm_vm_check_extension(s, KVM_CAP_PPC_AIL_MODE_3);
kvm_ppc_register_host_cpu_type();
return 0;
}
int kvm_arch_irqchip_create(KVMState *s)
{
return 0;
}
static int kvm_arch_sync_sregs(PowerPCCPU *cpu)
{
CPUPPCState *cenv = &cpu->env;
CPUState *cs = CPU(cpu);
struct kvm_sregs sregs;
int ret;
if (cenv->excp_model == POWERPC_EXCP_BOOKE) {
/*
* What we're really trying to say is "if we're on BookE, we
* use the native PVR for now". This is the only sane way to
* check it though, so we potentially confuse users that they
* can run BookE guests on BookS. Let's hope nobody dares
* enough :)
*/
return 0;
} else {
if (!cap_segstate) {
fprintf(stderr, "kvm error: missing PVR setting capability\n");
return -ENOSYS;
}
}
ret = kvm_vcpu_ioctl(cs, KVM_GET_SREGS, &sregs);
if (ret) {
return ret;
}
sregs.pvr = cenv->spr[SPR_PVR];
return kvm_vcpu_ioctl(cs, KVM_SET_SREGS, &sregs);
}
/* Set up a shared TLB array with KVM */
static int kvm_booke206_tlb_init(PowerPCCPU *cpu)
{
CPUPPCState *env = &cpu->env;
CPUState *cs = CPU(cpu);
struct kvm_book3e_206_tlb_params params = {};
struct kvm_config_tlb cfg = {};
unsigned int entries = 0;
int ret, i;
if (!kvm_enabled() ||
!kvm_check_extension(cs->kvm_state, KVM_CAP_SW_TLB)) {
return 0;
}
assert(ARRAY_SIZE(params.tlb_sizes) == BOOKE206_MAX_TLBN);
for (i = 0; i < BOOKE206_MAX_TLBN; i++) {
params.tlb_sizes[i] = booke206_tlb_size(env, i);
params.tlb_ways[i] = booke206_tlb_ways(env, i);
entries += params.tlb_sizes[i];
}
assert(entries == env->nb_tlb);
assert(sizeof(struct kvm_book3e_206_tlb_entry) == sizeof(ppcmas_tlb_t));
env->tlb_dirty = true;
cfg.array = (uintptr_t)env->tlb.tlbm;
cfg.array_len = sizeof(ppcmas_tlb_t) * entries;
cfg.params = (uintptr_t)&params;
cfg.mmu_type = KVM_MMU_FSL_BOOKE_NOHV;
ret = kvm_vcpu_enable_cap(cs, KVM_CAP_SW_TLB, 0, (uintptr_t)&cfg);
if (ret < 0) {
fprintf(stderr, "%s: couldn't enable KVM_CAP_SW_TLB: %s\n",
__func__, strerror(-ret));
return ret;
}
env->kvm_sw_tlb = true;
return 0;
}
ppc64: Rudimentary Support for extra page sizes on server CPUs More recent Power server chips (i.e. based on the 64 bit hash MMU) support more than just the traditional 4k and 16M page sizes. This can get quite complicated, because which page sizes are supported, which combinations are supported within an MMU segment and how these page sizes are encoded both in the SLB entry and the hash PTE can vary depending on the CPU model (they are not specified by the architecture). In addition the firmware or hypervisor may not permit use of certain page sizes, for various reasons. Whether various page sizes are supported on KVM, for example, depends on whether the PR or HV variant of KVM is in use, and on the page size of the memory backing the guest's RAM. This patch adds information to the CPUState and cpu defs to describe the supported page sizes and encodings. Since TCG does not yet support any extended page sizes, we just set this to NULL in the static CPU definitions, expanding this to the default 4k and 16M page sizes when we initialize the cpu state. When using KVM, however, we instead determine available page sizes using the new KVM_PPC_GET_SMMU_INFO call. For old kernels without that call, we use some defaults, with some guesswork which should do the right thing for existing HV and PR implementations. The fallback might not be correct for future versions, but that's ok, because they'll have KVM_PPC_GET_SMMU_INFO. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-06-18 23:56:25 +04:00
#if defined(TARGET_PPC64)
static void kvm_get_smmu_info(struct kvm_ppc_smmu_info *info, Error **errp)
ppc64: Rudimentary Support for extra page sizes on server CPUs More recent Power server chips (i.e. based on the 64 bit hash MMU) support more than just the traditional 4k and 16M page sizes. This can get quite complicated, because which page sizes are supported, which combinations are supported within an MMU segment and how these page sizes are encoded both in the SLB entry and the hash PTE can vary depending on the CPU model (they are not specified by the architecture). In addition the firmware or hypervisor may not permit use of certain page sizes, for various reasons. Whether various page sizes are supported on KVM, for example, depends on whether the PR or HV variant of KVM is in use, and on the page size of the memory backing the guest's RAM. This patch adds information to the CPUState and cpu defs to describe the supported page sizes and encodings. Since TCG does not yet support any extended page sizes, we just set this to NULL in the static CPU definitions, expanding this to the default 4k and 16M page sizes when we initialize the cpu state. When using KVM, however, we instead determine available page sizes using the new KVM_PPC_GET_SMMU_INFO call. For old kernels without that call, we use some defaults, with some guesswork which should do the right thing for existing HV and PR implementations. The fallback might not be correct for future versions, but that's ok, because they'll have KVM_PPC_GET_SMMU_INFO. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-06-18 23:56:25 +04:00
{
int ret;
assert(kvm_state != NULL);
if (!kvm_check_extension(kvm_state, KVM_CAP_PPC_GET_SMMU_INFO)) {
error_setg(errp, "KVM doesn't expose the MMU features it supports");
error_append_hint(errp, "Consider switching to a newer KVM\n");
return;
ppc64: Rudimentary Support for extra page sizes on server CPUs More recent Power server chips (i.e. based on the 64 bit hash MMU) support more than just the traditional 4k and 16M page sizes. This can get quite complicated, because which page sizes are supported, which combinations are supported within an MMU segment and how these page sizes are encoded both in the SLB entry and the hash PTE can vary depending on the CPU model (they are not specified by the architecture). In addition the firmware or hypervisor may not permit use of certain page sizes, for various reasons. Whether various page sizes are supported on KVM, for example, depends on whether the PR or HV variant of KVM is in use, and on the page size of the memory backing the guest's RAM. This patch adds information to the CPUState and cpu defs to describe the supported page sizes and encodings. Since TCG does not yet support any extended page sizes, we just set this to NULL in the static CPU definitions, expanding this to the default 4k and 16M page sizes when we initialize the cpu state. When using KVM, however, we instead determine available page sizes using the new KVM_PPC_GET_SMMU_INFO call. For old kernels without that call, we use some defaults, with some guesswork which should do the right thing for existing HV and PR implementations. The fallback might not be correct for future versions, but that's ok, because they'll have KVM_PPC_GET_SMMU_INFO. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-06-18 23:56:25 +04:00
}
ret = kvm_vm_ioctl(kvm_state, KVM_PPC_GET_SMMU_INFO, info);
if (ret == 0) {
return;
ppc64: Rudimentary Support for extra page sizes on server CPUs More recent Power server chips (i.e. based on the 64 bit hash MMU) support more than just the traditional 4k and 16M page sizes. This can get quite complicated, because which page sizes are supported, which combinations are supported within an MMU segment and how these page sizes are encoded both in the SLB entry and the hash PTE can vary depending on the CPU model (they are not specified by the architecture). In addition the firmware or hypervisor may not permit use of certain page sizes, for various reasons. Whether various page sizes are supported on KVM, for example, depends on whether the PR or HV variant of KVM is in use, and on the page size of the memory backing the guest's RAM. This patch adds information to the CPUState and cpu defs to describe the supported page sizes and encodings. Since TCG does not yet support any extended page sizes, we just set this to NULL in the static CPU definitions, expanding this to the default 4k and 16M page sizes when we initialize the cpu state. When using KVM, however, we instead determine available page sizes using the new KVM_PPC_GET_SMMU_INFO call. For old kernels without that call, we use some defaults, with some guesswork which should do the right thing for existing HV and PR implementations. The fallback might not be correct for future versions, but that's ok, because they'll have KVM_PPC_GET_SMMU_INFO. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-06-18 23:56:25 +04:00
}
error_setg_errno(errp, -ret,
"KVM failed to provide the MMU features it supports");
ppc64: Rudimentary Support for extra page sizes on server CPUs More recent Power server chips (i.e. based on the 64 bit hash MMU) support more than just the traditional 4k and 16M page sizes. This can get quite complicated, because which page sizes are supported, which combinations are supported within an MMU segment and how these page sizes are encoded both in the SLB entry and the hash PTE can vary depending on the CPU model (they are not specified by the architecture). In addition the firmware or hypervisor may not permit use of certain page sizes, for various reasons. Whether various page sizes are supported on KVM, for example, depends on whether the PR or HV variant of KVM is in use, and on the page size of the memory backing the guest's RAM. This patch adds information to the CPUState and cpu defs to describe the supported page sizes and encodings. Since TCG does not yet support any extended page sizes, we just set this to NULL in the static CPU definitions, expanding this to the default 4k and 16M page sizes when we initialize the cpu state. When using KVM, however, we instead determine available page sizes using the new KVM_PPC_GET_SMMU_INFO call. For old kernels without that call, we use some defaults, with some guesswork which should do the right thing for existing HV and PR implementations. The fallback might not be correct for future versions, but that's ok, because they'll have KVM_PPC_GET_SMMU_INFO. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-06-18 23:56:25 +04:00
}
static struct ppc_radix_page_info *kvmppc_get_radix_page_info(void)
{
KVMState *s = KVM_STATE(current_accel());
struct ppc_radix_page_info *radix_page_info;
struct kvm_ppc_rmmu_info rmmu_info = { };
int i;
if (!kvm_check_extension(s, KVM_CAP_PPC_MMU_RADIX)) {
return NULL;
}
if (kvm_vm_ioctl(s, KVM_PPC_GET_RMMU_INFO, &rmmu_info)) {
return NULL;
}
radix_page_info = g_malloc0(sizeof(*radix_page_info));
radix_page_info->count = 0;
for (i = 0; i < PPC_PAGE_SIZES_MAX_SZ; i++) {
if (rmmu_info.ap_encodings[i]) {
radix_page_info->entries[i] = rmmu_info.ap_encodings[i];
radix_page_info->count++;
}
}
return radix_page_info;
}
target_ulong kvmppc_configure_v3_mmu(PowerPCCPU *cpu,
bool radix, bool gtse,
uint64_t proc_tbl)
{
CPUState *cs = CPU(cpu);
int ret;
uint64_t flags = 0;
struct kvm_ppc_mmuv3_cfg cfg = {
.process_table = proc_tbl,
};
if (radix) {
flags |= KVM_PPC_MMUV3_RADIX;
}
if (gtse) {
flags |= KVM_PPC_MMUV3_GTSE;
}
cfg.flags = flags;
ret = kvm_vm_ioctl(cs->kvm_state, KVM_PPC_CONFIGURE_V3_MMU, &cfg);
switch (ret) {
case 0:
return H_SUCCESS;
case -EINVAL:
return H_PARAMETER;
case -ENODEV:
return H_NOT_AVAILABLE;
default:
return H_HARDWARE;
}
}
bool kvmppc_hpt_needs_host_contiguous_pages(void)
{
static struct kvm_ppc_smmu_info smmu_info;
if (!kvm_enabled()) {
return false;
}
kvm_get_smmu_info(&smmu_info, &error_fatal);
return !!(smmu_info.flags & KVM_PPC_PAGE_SIZES_REAL);
}
2018-04-16 09:19:52 +03:00
void kvm_check_mmu(PowerPCCPU *cpu, Error **errp)
ppc64: Rudimentary Support for extra page sizes on server CPUs More recent Power server chips (i.e. based on the 64 bit hash MMU) support more than just the traditional 4k and 16M page sizes. This can get quite complicated, because which page sizes are supported, which combinations are supported within an MMU segment and how these page sizes are encoded both in the SLB entry and the hash PTE can vary depending on the CPU model (they are not specified by the architecture). In addition the firmware or hypervisor may not permit use of certain page sizes, for various reasons. Whether various page sizes are supported on KVM, for example, depends on whether the PR or HV variant of KVM is in use, and on the page size of the memory backing the guest's RAM. This patch adds information to the CPUState and cpu defs to describe the supported page sizes and encodings. Since TCG does not yet support any extended page sizes, we just set this to NULL in the static CPU definitions, expanding this to the default 4k and 16M page sizes when we initialize the cpu state. When using KVM, however, we instead determine available page sizes using the new KVM_PPC_GET_SMMU_INFO call. For old kernels without that call, we use some defaults, with some guesswork which should do the right thing for existing HV and PR implementations. The fallback might not be correct for future versions, but that's ok, because they'll have KVM_PPC_GET_SMMU_INFO. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-06-18 23:56:25 +04:00
{
2018-04-16 09:19:52 +03:00
struct kvm_ppc_smmu_info smmu_info;
ppc64: Rudimentary Support for extra page sizes on server CPUs More recent Power server chips (i.e. based on the 64 bit hash MMU) support more than just the traditional 4k and 16M page sizes. This can get quite complicated, because which page sizes are supported, which combinations are supported within an MMU segment and how these page sizes are encoded both in the SLB entry and the hash PTE can vary depending on the CPU model (they are not specified by the architecture). In addition the firmware or hypervisor may not permit use of certain page sizes, for various reasons. Whether various page sizes are supported on KVM, for example, depends on whether the PR or HV variant of KVM is in use, and on the page size of the memory backing the guest's RAM. This patch adds information to the CPUState and cpu defs to describe the supported page sizes and encodings. Since TCG does not yet support any extended page sizes, we just set this to NULL in the static CPU definitions, expanding this to the default 4k and 16M page sizes when we initialize the cpu state. When using KVM, however, we instead determine available page sizes using the new KVM_PPC_GET_SMMU_INFO call. For old kernels without that call, we use some defaults, with some guesswork which should do the right thing for existing HV and PR implementations. The fallback might not be correct for future versions, but that's ok, because they'll have KVM_PPC_GET_SMMU_INFO. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-06-18 23:56:25 +04:00
int iq, ik, jq, jk;
Error *local_err = NULL;
ppc64: Rudimentary Support for extra page sizes on server CPUs More recent Power server chips (i.e. based on the 64 bit hash MMU) support more than just the traditional 4k and 16M page sizes. This can get quite complicated, because which page sizes are supported, which combinations are supported within an MMU segment and how these page sizes are encoded both in the SLB entry and the hash PTE can vary depending on the CPU model (they are not specified by the architecture). In addition the firmware or hypervisor may not permit use of certain page sizes, for various reasons. Whether various page sizes are supported on KVM, for example, depends on whether the PR or HV variant of KVM is in use, and on the page size of the memory backing the guest's RAM. This patch adds information to the CPUState and cpu defs to describe the supported page sizes and encodings. Since TCG does not yet support any extended page sizes, we just set this to NULL in the static CPU definitions, expanding this to the default 4k and 16M page sizes when we initialize the cpu state. When using KVM, however, we instead determine available page sizes using the new KVM_PPC_GET_SMMU_INFO call. For old kernels without that call, we use some defaults, with some guesswork which should do the right thing for existing HV and PR implementations. The fallback might not be correct for future versions, but that's ok, because they'll have KVM_PPC_GET_SMMU_INFO. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-06-18 23:56:25 +04:00
2018-04-16 09:19:52 +03:00
/* For now, we only have anything to check on hash64 MMUs */
if (!cpu->hash64_opts || !kvm_enabled()) {
ppc64: Rudimentary Support for extra page sizes on server CPUs More recent Power server chips (i.e. based on the 64 bit hash MMU) support more than just the traditional 4k and 16M page sizes. This can get quite complicated, because which page sizes are supported, which combinations are supported within an MMU segment and how these page sizes are encoded both in the SLB entry and the hash PTE can vary depending on the CPU model (they are not specified by the architecture). In addition the firmware or hypervisor may not permit use of certain page sizes, for various reasons. Whether various page sizes are supported on KVM, for example, depends on whether the PR or HV variant of KVM is in use, and on the page size of the memory backing the guest's RAM. This patch adds information to the CPUState and cpu defs to describe the supported page sizes and encodings. Since TCG does not yet support any extended page sizes, we just set this to NULL in the static CPU definitions, expanding this to the default 4k and 16M page sizes when we initialize the cpu state. When using KVM, however, we instead determine available page sizes using the new KVM_PPC_GET_SMMU_INFO call. For old kernels without that call, we use some defaults, with some guesswork which should do the right thing for existing HV and PR implementations. The fallback might not be correct for future versions, but that's ok, because they'll have KVM_PPC_GET_SMMU_INFO. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-06-18 23:56:25 +04:00
return;
}
kvm_get_smmu_info(&smmu_info, &local_err);
if (local_err) {
error_propagate(errp, local_err);
return;
}
ppc64: Rudimentary Support for extra page sizes on server CPUs More recent Power server chips (i.e. based on the 64 bit hash MMU) support more than just the traditional 4k and 16M page sizes. This can get quite complicated, because which page sizes are supported, which combinations are supported within an MMU segment and how these page sizes are encoded both in the SLB entry and the hash PTE can vary depending on the CPU model (they are not specified by the architecture). In addition the firmware or hypervisor may not permit use of certain page sizes, for various reasons. Whether various page sizes are supported on KVM, for example, depends on whether the PR or HV variant of KVM is in use, and on the page size of the memory backing the guest's RAM. This patch adds information to the CPUState and cpu defs to describe the supported page sizes and encodings. Since TCG does not yet support any extended page sizes, we just set this to NULL in the static CPU definitions, expanding this to the default 4k and 16M page sizes when we initialize the cpu state. When using KVM, however, we instead determine available page sizes using the new KVM_PPC_GET_SMMU_INFO call. For old kernels without that call, we use some defaults, with some guesswork which should do the right thing for existing HV and PR implementations. The fallback might not be correct for future versions, but that's ok, because they'll have KVM_PPC_GET_SMMU_INFO. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-06-18 23:56:25 +04:00
2018-04-16 09:19:52 +03:00
if (ppc_hash64_has(cpu, PPC_HASH64_1TSEG)
&& !(smmu_info.flags & KVM_PPC_1T_SEGMENTS)) {
error_setg(errp,
"KVM does not support 1TiB segments which guest expects");
return;
}
ppc64: Rudimentary Support for extra page sizes on server CPUs More recent Power server chips (i.e. based on the 64 bit hash MMU) support more than just the traditional 4k and 16M page sizes. This can get quite complicated, because which page sizes are supported, which combinations are supported within an MMU segment and how these page sizes are encoded both in the SLB entry and the hash PTE can vary depending on the CPU model (they are not specified by the architecture). In addition the firmware or hypervisor may not permit use of certain page sizes, for various reasons. Whether various page sizes are supported on KVM, for example, depends on whether the PR or HV variant of KVM is in use, and on the page size of the memory backing the guest's RAM. This patch adds information to the CPUState and cpu defs to describe the supported page sizes and encodings. Since TCG does not yet support any extended page sizes, we just set this to NULL in the static CPU definitions, expanding this to the default 4k and 16M page sizes when we initialize the cpu state. When using KVM, however, we instead determine available page sizes using the new KVM_PPC_GET_SMMU_INFO call. For old kernels without that call, we use some defaults, with some guesswork which should do the right thing for existing HV and PR implementations. The fallback might not be correct for future versions, but that's ok, because they'll have KVM_PPC_GET_SMMU_INFO. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-06-18 23:56:25 +04:00
2018-04-16 09:19:52 +03:00
if (smmu_info.slb_size < cpu->hash64_opts->slb_size) {
error_setg(errp, "KVM only supports %u SLB entries, but guest needs %u",
smmu_info.slb_size, cpu->hash64_opts->slb_size);
return;
}
/*
2018-04-16 09:19:52 +03:00
* Verify that every pagesize supported by the cpu model is
* supported by KVM with the same encodings
*/
2018-04-16 09:19:52 +03:00
for (iq = 0; iq < ARRAY_SIZE(cpu->hash64_opts->sps); iq++) {
PPCHash64SegmentPageSizes *qsps = &cpu->hash64_opts->sps[iq];
2018-04-16 09:19:52 +03:00
struct kvm_ppc_one_seg_page_size *ksps;
ppc64: Rudimentary Support for extra page sizes on server CPUs More recent Power server chips (i.e. based on the 64 bit hash MMU) support more than just the traditional 4k and 16M page sizes. This can get quite complicated, because which page sizes are supported, which combinations are supported within an MMU segment and how these page sizes are encoded both in the SLB entry and the hash PTE can vary depending on the CPU model (they are not specified by the architecture). In addition the firmware or hypervisor may not permit use of certain page sizes, for various reasons. Whether various page sizes are supported on KVM, for example, depends on whether the PR or HV variant of KVM is in use, and on the page size of the memory backing the guest's RAM. This patch adds information to the CPUState and cpu defs to describe the supported page sizes and encodings. Since TCG does not yet support any extended page sizes, we just set this to NULL in the static CPU definitions, expanding this to the default 4k and 16M page sizes when we initialize the cpu state. When using KVM, however, we instead determine available page sizes using the new KVM_PPC_GET_SMMU_INFO call. For old kernels without that call, we use some defaults, with some guesswork which should do the right thing for existing HV and PR implementations. The fallback might not be correct for future versions, but that's ok, because they'll have KVM_PPC_GET_SMMU_INFO. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-06-18 23:56:25 +04:00
2018-04-16 09:19:52 +03:00
for (ik = 0; ik < ARRAY_SIZE(smmu_info.sps); ik++) {
if (qsps->page_shift == smmu_info.sps[ik].page_shift) {
ppc64: Rudimentary Support for extra page sizes on server CPUs More recent Power server chips (i.e. based on the 64 bit hash MMU) support more than just the traditional 4k and 16M page sizes. This can get quite complicated, because which page sizes are supported, which combinations are supported within an MMU segment and how these page sizes are encoded both in the SLB entry and the hash PTE can vary depending on the CPU model (they are not specified by the architecture). In addition the firmware or hypervisor may not permit use of certain page sizes, for various reasons. Whether various page sizes are supported on KVM, for example, depends on whether the PR or HV variant of KVM is in use, and on the page size of the memory backing the guest's RAM. This patch adds information to the CPUState and cpu defs to describe the supported page sizes and encodings. Since TCG does not yet support any extended page sizes, we just set this to NULL in the static CPU definitions, expanding this to the default 4k and 16M page sizes when we initialize the cpu state. When using KVM, however, we instead determine available page sizes using the new KVM_PPC_GET_SMMU_INFO call. For old kernels without that call, we use some defaults, with some guesswork which should do the right thing for existing HV and PR implementations. The fallback might not be correct for future versions, but that's ok, because they'll have KVM_PPC_GET_SMMU_INFO. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-06-18 23:56:25 +04:00
break;
}
}
2018-04-16 09:19:52 +03:00
if (ik >= ARRAY_SIZE(smmu_info.sps)) {
error_setg(errp, "KVM doesn't support for base page shift %u",
qsps->page_shift);
return;
}
ksps = &smmu_info.sps[ik];
if (ksps->slb_enc != qsps->slb_enc) {
error_setg(errp,
"KVM uses SLB encoding 0x%x for page shift %u, but guest expects 0x%x",
ksps->slb_enc, ksps->page_shift, qsps->slb_enc);
return;
}
for (jq = 0; jq < ARRAY_SIZE(qsps->enc); jq++) {
for (jk = 0; jk < ARRAY_SIZE(ksps->enc); jk++) {
if (qsps->enc[jq].page_shift == ksps->enc[jk].page_shift) {
break;
}
}
if (jk >= ARRAY_SIZE(ksps->enc)) {
error_setg(errp, "KVM doesn't support page shift %u/%u",
qsps->enc[jq].page_shift, qsps->page_shift);
return;
}
if (qsps->enc[jq].pte_enc != ksps->enc[jk].pte_enc) {
error_setg(errp,
"KVM uses PTE encoding 0x%x for page shift %u/%u, but guest expects 0x%x",
ksps->enc[jk].pte_enc, qsps->enc[jq].page_shift,
qsps->page_shift, qsps->enc[jq].pte_enc);
return;
}
ppc64: Rudimentary Support for extra page sizes on server CPUs More recent Power server chips (i.e. based on the 64 bit hash MMU) support more than just the traditional 4k and 16M page sizes. This can get quite complicated, because which page sizes are supported, which combinations are supported within an MMU segment and how these page sizes are encoded both in the SLB entry and the hash PTE can vary depending on the CPU model (they are not specified by the architecture). In addition the firmware or hypervisor may not permit use of certain page sizes, for various reasons. Whether various page sizes are supported on KVM, for example, depends on whether the PR or HV variant of KVM is in use, and on the page size of the memory backing the guest's RAM. This patch adds information to the CPUState and cpu defs to describe the supported page sizes and encodings. Since TCG does not yet support any extended page sizes, we just set this to NULL in the static CPU definitions, expanding this to the default 4k and 16M page sizes when we initialize the cpu state. When using KVM, however, we instead determine available page sizes using the new KVM_PPC_GET_SMMU_INFO call. For old kernels without that call, we use some defaults, with some guesswork which should do the right thing for existing HV and PR implementations. The fallback might not be correct for future versions, but that's ok, because they'll have KVM_PPC_GET_SMMU_INFO. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-06-18 23:56:25 +04:00
}
}
2018-04-16 09:19:52 +03:00
if (ppc_hash64_has(cpu, PPC_HASH64_CI_LARGEPAGE)) {
/*
* Mostly what guest pagesizes we can use are related to the
2018-04-16 09:19:52 +03:00
* host pages used to map guest RAM, which is handled in the
* platform code. Cache-Inhibited largepages (64k) however are
* used for I/O, so if they're mapped to the host at all it
* will be a normal mapping, not a special hugepage one used
* for RAM.
*/
if (qemu_real_host_page_size() < 0x10000) {
2018-04-16 09:19:52 +03:00
error_setg(errp,
"KVM can't supply 64kiB CI pages, which guest expects");
}
}
ppc64: Rudimentary Support for extra page sizes on server CPUs More recent Power server chips (i.e. based on the 64 bit hash MMU) support more than just the traditional 4k and 16M page sizes. This can get quite complicated, because which page sizes are supported, which combinations are supported within an MMU segment and how these page sizes are encoded both in the SLB entry and the hash PTE can vary depending on the CPU model (they are not specified by the architecture). In addition the firmware or hypervisor may not permit use of certain page sizes, for various reasons. Whether various page sizes are supported on KVM, for example, depends on whether the PR or HV variant of KVM is in use, and on the page size of the memory backing the guest's RAM. This patch adds information to the CPUState and cpu defs to describe the supported page sizes and encodings. Since TCG does not yet support any extended page sizes, we just set this to NULL in the static CPU definitions, expanding this to the default 4k and 16M page sizes when we initialize the cpu state. When using KVM, however, we instead determine available page sizes using the new KVM_PPC_GET_SMMU_INFO call. For old kernels without that call, we use some defaults, with some guesswork which should do the right thing for existing HV and PR implementations. The fallback might not be correct for future versions, but that's ok, because they'll have KVM_PPC_GET_SMMU_INFO. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-06-18 23:56:25 +04:00
}
#endif /* !defined (TARGET_PPC64) */
unsigned long kvm_arch_vcpu_id(CPUState *cpu)
{
return POWERPC_CPU(cpu)->vcpu_id;
}
/*
* e500 supports 2 h/w breakpoint and 2 watchpoint. book3s supports
* only 1 watchpoint, so array size of 4 is sufficient for now.
*/
#define MAX_HW_BKPTS 4
static struct HWBreakpoint {
target_ulong addr;
int type;
} hw_debug_points[MAX_HW_BKPTS];
static CPUWatchpoint hw_watchpoint;
/* Default there is no breakpoint and watchpoint supported */
static int max_hw_breakpoint;
static int max_hw_watchpoint;
static int nb_hw_breakpoint;
static int nb_hw_watchpoint;
static void kvmppc_hw_debug_points_init(CPUPPCState *cenv)
{
if (cenv->excp_model == POWERPC_EXCP_BOOKE) {
max_hw_breakpoint = 2;
max_hw_watchpoint = 2;
}
if ((max_hw_breakpoint + max_hw_watchpoint) > MAX_HW_BKPTS) {
fprintf(stderr, "Error initializing h/w breakpoints\n");
return;
}
}
int kvm_arch_init_vcpu(CPUState *cs)
{
PowerPCCPU *cpu = POWERPC_CPU(cs);
CPUPPCState *cenv = &cpu->env;
int ret;
ppc64: Rudimentary Support for extra page sizes on server CPUs More recent Power server chips (i.e. based on the 64 bit hash MMU) support more than just the traditional 4k and 16M page sizes. This can get quite complicated, because which page sizes are supported, which combinations are supported within an MMU segment and how these page sizes are encoded both in the SLB entry and the hash PTE can vary depending on the CPU model (they are not specified by the architecture). In addition the firmware or hypervisor may not permit use of certain page sizes, for various reasons. Whether various page sizes are supported on KVM, for example, depends on whether the PR or HV variant of KVM is in use, and on the page size of the memory backing the guest's RAM. This patch adds information to the CPUState and cpu defs to describe the supported page sizes and encodings. Since TCG does not yet support any extended page sizes, we just set this to NULL in the static CPU definitions, expanding this to the default 4k and 16M page sizes when we initialize the cpu state. When using KVM, however, we instead determine available page sizes using the new KVM_PPC_GET_SMMU_INFO call. For old kernels without that call, we use some defaults, with some guesswork which should do the right thing for existing HV and PR implementations. The fallback might not be correct for future versions, but that's ok, because they'll have KVM_PPC_GET_SMMU_INFO. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-06-18 23:56:25 +04:00
/* Synchronize sregs with kvm */
ret = kvm_arch_sync_sregs(cpu);
if (ret) {
if (ret == -EINVAL) {
error_report("Register sync failed... If you're using kvm-hv.ko,"
" only \"-cpu host\" is possible");
}
return ret;
}
switch (cenv->mmu_model) {
case POWERPC_MMU_BOOKE206:
/* This target supports access to KVM's guest TLB */
ret = kvm_booke206_tlb_init(cpu);
break;
case POWERPC_MMU_2_07:
if (!cap_htm && !kvmppc_is_pr(cs->kvm_state)) {
/*
* KVM-HV has transactional memory on POWER8 also without
* the KVM_CAP_PPC_HTM extension, so enable it here
* instead as long as it's available to userspace on the
* host.
*/
if (qemu_getauxval(AT_HWCAP2) & PPC_FEATURE2_HAS_HTM) {
cap_htm = true;
}
}
break;
default:
break;
}
kvm_get_one_reg(cs, KVM_REG_PPC_DEBUG_INST, &debug_inst_opcode);
kvmppc_hw_debug_points_init(cenv);
return ret;
}
int kvm_arch_destroy_vcpu(CPUState *cs)
{
return 0;
}
static void kvm_sw_tlb_put(PowerPCCPU *cpu)
{
CPUPPCState *env = &cpu->env;
CPUState *cs = CPU(cpu);
struct kvm_dirty_tlb dirty_tlb;
unsigned char *bitmap;
int ret;
if (!env->kvm_sw_tlb) {
return;
}
bitmap = g_malloc((env->nb_tlb + 7) / 8);
memset(bitmap, 0xFF, (env->nb_tlb + 7) / 8);
dirty_tlb.bitmap = (uintptr_t)bitmap;
dirty_tlb.num_dirty = env->nb_tlb;
ret = kvm_vcpu_ioctl(cs, KVM_DIRTY_TLB, &dirty_tlb);
if (ret) {
fprintf(stderr, "%s: KVM_DIRTY_TLB: %s\n",
__func__, strerror(-ret));
}
g_free(bitmap);
}
static void kvm_get_one_spr(CPUState *cs, uint64_t id, int spr)
{
CPUPPCState *env = cpu_env(cs);
target/ppc: initialize 'val' union in kvm_get_one_spr() Valgrind isn't convinced that we are initializing the values we assign to env->spr[spr] because it doesn't understand that the 'val' union is being written by the kvm_vcpu_ioctl() that follows (via struct kvm_one_reg). This results in Valgrind complaining about uninitialized values every time we use env->spr in a conditional, like this instance: ==707578== Thread 1: ==707578== Conditional jump or move depends on uninitialised value(s) ==707578== at 0xA10A40: hreg_compute_hflags_value (helper_regs.c:106) ==707578== by 0xA10C9F: hreg_compute_hflags (helper_regs.c:173) ==707578== by 0xA110F7: hreg_store_msr (helper_regs.c:262) ==707578== by 0xA051A3: ppc_cpu_reset (cpu_init.c:7168) ==707578== by 0xD4730F: device_transitional_reset (qdev.c:799) ==707578== by 0xD4A11B: resettable_phase_hold (resettable.c:182) ==707578== by 0xD49A77: resettable_assert_reset (resettable.c:60) ==707578== by 0xD4994B: resettable_reset (resettable.c:45) ==707578== by 0xD458BB: device_cold_reset (qdev.c:296) ==707578== by 0x48FBC7: cpu_reset (cpu-common.c:114) ==707578== by 0x97B5EB: spapr_reset_vcpu (spapr_cpu_core.c:38) ==707578== by 0x97BABB: spapr_cpu_core_reset (spapr_cpu_core.c:209) ==707578== Uninitialised value was created by a stack allocation ==707578== at 0xB11F08: kvm_get_one_spr (kvm.c:543) Initializing 'val' has no impact in the logic and makes Valgrind output more bearable. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20220331001717.616938-2-danielhb413@gmail.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-03-31 03:17:14 +03:00
/* Init 'val' to avoid "uninitialised value" Valgrind warnings */
union {
uint32_t u32;
uint64_t u64;
target/ppc: initialize 'val' union in kvm_get_one_spr() Valgrind isn't convinced that we are initializing the values we assign to env->spr[spr] because it doesn't understand that the 'val' union is being written by the kvm_vcpu_ioctl() that follows (via struct kvm_one_reg). This results in Valgrind complaining about uninitialized values every time we use env->spr in a conditional, like this instance: ==707578== Thread 1: ==707578== Conditional jump or move depends on uninitialised value(s) ==707578== at 0xA10A40: hreg_compute_hflags_value (helper_regs.c:106) ==707578== by 0xA10C9F: hreg_compute_hflags (helper_regs.c:173) ==707578== by 0xA110F7: hreg_store_msr (helper_regs.c:262) ==707578== by 0xA051A3: ppc_cpu_reset (cpu_init.c:7168) ==707578== by 0xD4730F: device_transitional_reset (qdev.c:799) ==707578== by 0xD4A11B: resettable_phase_hold (resettable.c:182) ==707578== by 0xD49A77: resettable_assert_reset (resettable.c:60) ==707578== by 0xD4994B: resettable_reset (resettable.c:45) ==707578== by 0xD458BB: device_cold_reset (qdev.c:296) ==707578== by 0x48FBC7: cpu_reset (cpu-common.c:114) ==707578== by 0x97B5EB: spapr_reset_vcpu (spapr_cpu_core.c:38) ==707578== by 0x97BABB: spapr_cpu_core_reset (spapr_cpu_core.c:209) ==707578== Uninitialised value was created by a stack allocation ==707578== at 0xB11F08: kvm_get_one_spr (kvm.c:543) Initializing 'val' has no impact in the logic and makes Valgrind output more bearable. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20220331001717.616938-2-danielhb413@gmail.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-03-31 03:17:14 +03:00
} val = { };
struct kvm_one_reg reg = {
.id = id,
.addr = (uintptr_t) &val,
};
int ret;
ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &reg);
if (ret != 0) {
trace_kvm_failed_spr_get(spr, strerror(errno));
} else {
switch (id & KVM_REG_SIZE_MASK) {
case KVM_REG_SIZE_U32:
env->spr[spr] = val.u32;
break;
case KVM_REG_SIZE_U64:
env->spr[spr] = val.u64;
break;
default:
/* Don't handle this size yet */
abort();
}
}
}
static void kvm_put_one_spr(CPUState *cs, uint64_t id, int spr)
{
CPUPPCState *env = cpu_env(cs);
union {
uint32_t u32;
uint64_t u64;
} val;
struct kvm_one_reg reg = {
.id = id,
.addr = (uintptr_t) &val,
};
int ret;
switch (id & KVM_REG_SIZE_MASK) {
case KVM_REG_SIZE_U32:
val.u32 = env->spr[spr];
break;
case KVM_REG_SIZE_U64:
val.u64 = env->spr[spr];
break;
default:
/* Don't handle this size yet */
abort();
}
ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg);
if (ret != 0) {
trace_kvm_failed_spr_set(spr, strerror(errno));
}
}
static int kvm_put_fp(CPUState *cs)
{
CPUPPCState *env = cpu_env(cs);
struct kvm_one_reg reg;
int i;
int ret;
if (env->insns_flags & PPC_FLOAT) {
uint64_t fpscr = env->fpscr;
bool vsx = !!(env->insns_flags2 & PPC2_VSX);
reg.id = KVM_REG_PPC_FPSCR;
reg.addr = (uintptr_t)&fpscr;
ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg);
if (ret < 0) {
trace_kvm_failed_fpscr_set(strerror(errno));
return ret;
}
for (i = 0; i < 32; i++) {
uint64_t vsr[2];
uint64_t *fpr = cpu_fpr_ptr(env, i);
uint64_t *vsrl = cpu_vsrl_ptr(env, i);
#if HOST_BIG_ENDIAN
target/ppc: move FP and VMX registers into aligned vsr register array The VSX register array is a block of 64 128-bit registers where the first 32 registers consist of the existing 64-bit FP registers extended to 128-bit using new VSR registers, and the last 32 registers are the VMX 128-bit registers as show below: 64-bit 64-bit +--------------------+--------------------+ | FP0 | | VSR0 +--------------------+--------------------+ | FP1 | | VSR1 +--------------------+--------------------+ | ... | ... | ... +--------------------+--------------------+ | FP30 | | VSR30 +--------------------+--------------------+ | FP31 | | VSR31 +--------------------+--------------------+ | VMX0 | VSR32 +-----------------------------------------+ | VMX1 | VSR33 +-----------------------------------------+ | ... | ... +-----------------------------------------+ | VMX30 | VSR62 +-----------------------------------------+ | VMX31 | VSR63 +-----------------------------------------+ In order to allow for future conversion of VSX instructions to use TCG vector operations, recreate the same layout using an aligned version of the existing vsr register array. Since the old fpr and avr register arrays are removed, the existing callers must also be updated to use the correct offset in the vsr register array. This also includes switching the relevant VMState fields over to using subarrays to make sure that migration is preserved. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-01-02 12:14:22 +03:00
vsr[0] = float64_val(*fpr);
vsr[1] = *vsrl;
#else
target/ppc: move FP and VMX registers into aligned vsr register array The VSX register array is a block of 64 128-bit registers where the first 32 registers consist of the existing 64-bit FP registers extended to 128-bit using new VSR registers, and the last 32 registers are the VMX 128-bit registers as show below: 64-bit 64-bit +--------------------+--------------------+ | FP0 | | VSR0 +--------------------+--------------------+ | FP1 | | VSR1 +--------------------+--------------------+ | ... | ... | ... +--------------------+--------------------+ | FP30 | | VSR30 +--------------------+--------------------+ | FP31 | | VSR31 +--------------------+--------------------+ | VMX0 | VSR32 +-----------------------------------------+ | VMX1 | VSR33 +-----------------------------------------+ | ... | ... +-----------------------------------------+ | VMX30 | VSR62 +-----------------------------------------+ | VMX31 | VSR63 +-----------------------------------------+ In order to allow for future conversion of VSX instructions to use TCG vector operations, recreate the same layout using an aligned version of the existing vsr register array. Since the old fpr and avr register arrays are removed, the existing callers must also be updated to use the correct offset in the vsr register array. This also includes switching the relevant VMState fields over to using subarrays to make sure that migration is preserved. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-01-02 12:14:22 +03:00
vsr[0] = *vsrl;
vsr[1] = float64_val(*fpr);
#endif
reg.addr = (uintptr_t) &vsr;
reg.id = vsx ? KVM_REG_PPC_VSR(i) : KVM_REG_PPC_FPR(i);
ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg);
if (ret < 0) {
trace_kvm_failed_fp_set(vsx ? "VSR" : "FPR", i,
strerror(errno));
return ret;
}
}
}
if (env->insns_flags & PPC_ALTIVEC) {
reg.id = KVM_REG_PPC_VSCR;
reg.addr = (uintptr_t)&env->vscr;
ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg);
if (ret < 0) {
trace_kvm_failed_vscr_set(strerror(errno));
return ret;
}
for (i = 0; i < 32; i++) {
reg.id = KVM_REG_PPC_VR(i);
target/ppc: move FP and VMX registers into aligned vsr register array The VSX register array is a block of 64 128-bit registers where the first 32 registers consist of the existing 64-bit FP registers extended to 128-bit using new VSR registers, and the last 32 registers are the VMX 128-bit registers as show below: 64-bit 64-bit +--------------------+--------------------+ | FP0 | | VSR0 +--------------------+--------------------+ | FP1 | | VSR1 +--------------------+--------------------+ | ... | ... | ... +--------------------+--------------------+ | FP30 | | VSR30 +--------------------+--------------------+ | FP31 | | VSR31 +--------------------+--------------------+ | VMX0 | VSR32 +-----------------------------------------+ | VMX1 | VSR33 +-----------------------------------------+ | ... | ... +-----------------------------------------+ | VMX30 | VSR62 +-----------------------------------------+ | VMX31 | VSR63 +-----------------------------------------+ In order to allow for future conversion of VSX instructions to use TCG vector operations, recreate the same layout using an aligned version of the existing vsr register array. Since the old fpr and avr register arrays are removed, the existing callers must also be updated to use the correct offset in the vsr register array. This also includes switching the relevant VMState fields over to using subarrays to make sure that migration is preserved. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-01-02 12:14:22 +03:00
reg.addr = (uintptr_t)cpu_avr_ptr(env, i);
ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg);
if (ret < 0) {
trace_kvm_failed_vr_set(i, strerror(errno));
return ret;
}
}
}
return 0;
}
static int kvm_get_fp(CPUState *cs)
{
CPUPPCState *env = cpu_env(cs);
struct kvm_one_reg reg;
int i;
int ret;
if (env->insns_flags & PPC_FLOAT) {
uint64_t fpscr;
bool vsx = !!(env->insns_flags2 & PPC2_VSX);
reg.id = KVM_REG_PPC_FPSCR;
reg.addr = (uintptr_t)&fpscr;
ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &reg);
if (ret < 0) {
trace_kvm_failed_fpscr_get(strerror(errno));
return ret;
} else {
env->fpscr = fpscr;
}
for (i = 0; i < 32; i++) {
uint64_t vsr[2];
uint64_t *fpr = cpu_fpr_ptr(env, i);
uint64_t *vsrl = cpu_vsrl_ptr(env, i);
reg.addr = (uintptr_t) &vsr;
reg.id = vsx ? KVM_REG_PPC_VSR(i) : KVM_REG_PPC_FPR(i);
ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &reg);
if (ret < 0) {
trace_kvm_failed_fp_get(vsx ? "VSR" : "FPR", i,
strerror(errno));
return ret;
} else {
#if HOST_BIG_ENDIAN
target/ppc: move FP and VMX registers into aligned vsr register array The VSX register array is a block of 64 128-bit registers where the first 32 registers consist of the existing 64-bit FP registers extended to 128-bit using new VSR registers, and the last 32 registers are the VMX 128-bit registers as show below: 64-bit 64-bit +--------------------+--------------------+ | FP0 | | VSR0 +--------------------+--------------------+ | FP1 | | VSR1 +--------------------+--------------------+ | ... | ... | ... +--------------------+--------------------+ | FP30 | | VSR30 +--------------------+--------------------+ | FP31 | | VSR31 +--------------------+--------------------+ | VMX0 | VSR32 +-----------------------------------------+ | VMX1 | VSR33 +-----------------------------------------+ | ... | ... +-----------------------------------------+ | VMX30 | VSR62 +-----------------------------------------+ | VMX31 | VSR63 +-----------------------------------------+ In order to allow for future conversion of VSX instructions to use TCG vector operations, recreate the same layout using an aligned version of the existing vsr register array. Since the old fpr and avr register arrays are removed, the existing callers must also be updated to use the correct offset in the vsr register array. This also includes switching the relevant VMState fields over to using subarrays to make sure that migration is preserved. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-01-02 12:14:22 +03:00
*fpr = vsr[0];
if (vsx) {
target/ppc: move FP and VMX registers into aligned vsr register array The VSX register array is a block of 64 128-bit registers where the first 32 registers consist of the existing 64-bit FP registers extended to 128-bit using new VSR registers, and the last 32 registers are the VMX 128-bit registers as show below: 64-bit 64-bit +--------------------+--------------------+ | FP0 | | VSR0 +--------------------+--------------------+ | FP1 | | VSR1 +--------------------+--------------------+ | ... | ... | ... +--------------------+--------------------+ | FP30 | | VSR30 +--------------------+--------------------+ | FP31 | | VSR31 +--------------------+--------------------+ | VMX0 | VSR32 +-----------------------------------------+ | VMX1 | VSR33 +-----------------------------------------+ | ... | ... +-----------------------------------------+ | VMX30 | VSR62 +-----------------------------------------+ | VMX31 | VSR63 +-----------------------------------------+ In order to allow for future conversion of VSX instructions to use TCG vector operations, recreate the same layout using an aligned version of the existing vsr register array. Since the old fpr and avr register arrays are removed, the existing callers must also be updated to use the correct offset in the vsr register array. This also includes switching the relevant VMState fields over to using subarrays to make sure that migration is preserved. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-01-02 12:14:22 +03:00
*vsrl = vsr[1];
}
#else
target/ppc: move FP and VMX registers into aligned vsr register array The VSX register array is a block of 64 128-bit registers where the first 32 registers consist of the existing 64-bit FP registers extended to 128-bit using new VSR registers, and the last 32 registers are the VMX 128-bit registers as show below: 64-bit 64-bit +--------------------+--------------------+ | FP0 | | VSR0 +--------------------+--------------------+ | FP1 | | VSR1 +--------------------+--------------------+ | ... | ... | ... +--------------------+--------------------+ | FP30 | | VSR30 +--------------------+--------------------+ | FP31 | | VSR31 +--------------------+--------------------+ | VMX0 | VSR32 +-----------------------------------------+ | VMX1 | VSR33 +-----------------------------------------+ | ... | ... +-----------------------------------------+ | VMX30 | VSR62 +-----------------------------------------+ | VMX31 | VSR63 +-----------------------------------------+ In order to allow for future conversion of VSX instructions to use TCG vector operations, recreate the same layout using an aligned version of the existing vsr register array. Since the old fpr and avr register arrays are removed, the existing callers must also be updated to use the correct offset in the vsr register array. This also includes switching the relevant VMState fields over to using subarrays to make sure that migration is preserved. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-01-02 12:14:22 +03:00
*fpr = vsr[1];
if (vsx) {
target/ppc: move FP and VMX registers into aligned vsr register array The VSX register array is a block of 64 128-bit registers where the first 32 registers consist of the existing 64-bit FP registers extended to 128-bit using new VSR registers, and the last 32 registers are the VMX 128-bit registers as show below: 64-bit 64-bit +--------------------+--------------------+ | FP0 | | VSR0 +--------------------+--------------------+ | FP1 | | VSR1 +--------------------+--------------------+ | ... | ... | ... +--------------------+--------------------+ | FP30 | | VSR30 +--------------------+--------------------+ | FP31 | | VSR31 +--------------------+--------------------+ | VMX0 | VSR32 +-----------------------------------------+ | VMX1 | VSR33 +-----------------------------------------+ | ... | ... +-----------------------------------------+ | VMX30 | VSR62 +-----------------------------------------+ | VMX31 | VSR63 +-----------------------------------------+ In order to allow for future conversion of VSX instructions to use TCG vector operations, recreate the same layout using an aligned version of the existing vsr register array. Since the old fpr and avr register arrays are removed, the existing callers must also be updated to use the correct offset in the vsr register array. This also includes switching the relevant VMState fields over to using subarrays to make sure that migration is preserved. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-01-02 12:14:22 +03:00
*vsrl = vsr[0];
}
#endif
}
}
}
if (env->insns_flags & PPC_ALTIVEC) {
reg.id = KVM_REG_PPC_VSCR;
reg.addr = (uintptr_t)&env->vscr;
ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &reg);
if (ret < 0) {
trace_kvm_failed_vscr_get(strerror(errno));
return ret;
}
for (i = 0; i < 32; i++) {
reg.id = KVM_REG_PPC_VR(i);
target/ppc: move FP and VMX registers into aligned vsr register array The VSX register array is a block of 64 128-bit registers where the first 32 registers consist of the existing 64-bit FP registers extended to 128-bit using new VSR registers, and the last 32 registers are the VMX 128-bit registers as show below: 64-bit 64-bit +--------------------+--------------------+ | FP0 | | VSR0 +--------------------+--------------------+ | FP1 | | VSR1 +--------------------+--------------------+ | ... | ... | ... +--------------------+--------------------+ | FP30 | | VSR30 +--------------------+--------------------+ | FP31 | | VSR31 +--------------------+--------------------+ | VMX0 | VSR32 +-----------------------------------------+ | VMX1 | VSR33 +-----------------------------------------+ | ... | ... +-----------------------------------------+ | VMX30 | VSR62 +-----------------------------------------+ | VMX31 | VSR63 +-----------------------------------------+ In order to allow for future conversion of VSX instructions to use TCG vector operations, recreate the same layout using an aligned version of the existing vsr register array. Since the old fpr and avr register arrays are removed, the existing callers must also be updated to use the correct offset in the vsr register array. This also includes switching the relevant VMState fields over to using subarrays to make sure that migration is preserved. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-01-02 12:14:22 +03:00
reg.addr = (uintptr_t)cpu_avr_ptr(env, i);
ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &reg);
if (ret < 0) {
trace_kvm_failed_vr_get(i, strerror(errno));
return ret;
}
}
}
return 0;
}
#if defined(TARGET_PPC64)
static int kvm_get_vpa(CPUState *cs)
{
PowerPCCPU *cpu = POWERPC_CPU(cs);
spapr: Use CamelCase properly The qemu coding standard is to use CamelCase for type and structure names, and the pseries code follows that... sort of. There are quite a lot of places where we bend the rules in order to preserve the capitalization of internal acronyms like "PHB", "TCE", "DIMM" and most commonly "sPAPR". That was a bad idea - it frequently leads to names ending up with hard to read clusters of capital letters, and means they don't catch the eye as type identifiers, which is kind of the point of the CamelCase convention in the first place. In short, keeping type identifiers look like CamelCase is more important than preserving standard capitalization of internal "words". So, this patch renames a heap of spapr internal type names to a more standard CamelCase. In addition to case changes, we also make some other identifier renames: VIOsPAPR* -> SpaprVio* The reverse word ordering was only ever used to mitigate the capital cluster, so revert to the natural ordering. VIOsPAPRVTYDevice -> SpaprVioVty VIOsPAPRVLANDevice -> SpaprVioVlan Brevity, since the "Device" didn't add useful information sPAPRDRConnector -> SpaprDrc sPAPRDRConnectorClass -> SpaprDrcClass Brevity, and makes it clearer this is the same thing as a "DRC" mentioned in many other places in the code This is 100% a mechanical search-and-replace patch. It will, however, conflict with essentially any and all outstanding patches touching the spapr code. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-06 07:35:37 +03:00
SpaprCpuState *spapr_cpu = spapr_cpu_state(cpu);
struct kvm_one_reg reg;
int ret;
reg.id = KVM_REG_PPC_VPA_ADDR;
reg.addr = (uintptr_t)&spapr_cpu->vpa_addr;
ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &reg);
if (ret < 0) {
trace_kvm_failed_vpa_addr_get(strerror(errno));
return ret;
}
assert((uintptr_t)&spapr_cpu->slb_shadow_size
== ((uintptr_t)&spapr_cpu->slb_shadow_addr + 8));
reg.id = KVM_REG_PPC_VPA_SLB;
reg.addr = (uintptr_t)&spapr_cpu->slb_shadow_addr;
ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &reg);
if (ret < 0) {
trace_kvm_failed_slb_get(strerror(errno));
return ret;
}
assert((uintptr_t)&spapr_cpu->dtl_size
== ((uintptr_t)&spapr_cpu->dtl_addr + 8));
reg.id = KVM_REG_PPC_VPA_DTL;
reg.addr = (uintptr_t)&spapr_cpu->dtl_addr;
ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &reg);
if (ret < 0) {
trace_kvm_failed_dtl_get(strerror(errno));
return ret;
}
return 0;
}
static int kvm_put_vpa(CPUState *cs)
{
PowerPCCPU *cpu = POWERPC_CPU(cs);
spapr: Use CamelCase properly The qemu coding standard is to use CamelCase for type and structure names, and the pseries code follows that... sort of. There are quite a lot of places where we bend the rules in order to preserve the capitalization of internal acronyms like "PHB", "TCE", "DIMM" and most commonly "sPAPR". That was a bad idea - it frequently leads to names ending up with hard to read clusters of capital letters, and means they don't catch the eye as type identifiers, which is kind of the point of the CamelCase convention in the first place. In short, keeping type identifiers look like CamelCase is more important than preserving standard capitalization of internal "words". So, this patch renames a heap of spapr internal type names to a more standard CamelCase. In addition to case changes, we also make some other identifier renames: VIOsPAPR* -> SpaprVio* The reverse word ordering was only ever used to mitigate the capital cluster, so revert to the natural ordering. VIOsPAPRVTYDevice -> SpaprVioVty VIOsPAPRVLANDevice -> SpaprVioVlan Brevity, since the "Device" didn't add useful information sPAPRDRConnector -> SpaprDrc sPAPRDRConnectorClass -> SpaprDrcClass Brevity, and makes it clearer this is the same thing as a "DRC" mentioned in many other places in the code This is 100% a mechanical search-and-replace patch. It will, however, conflict with essentially any and all outstanding patches touching the spapr code. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-06 07:35:37 +03:00
SpaprCpuState *spapr_cpu = spapr_cpu_state(cpu);
struct kvm_one_reg reg;
int ret;
/*
* SLB shadow or DTL can't be registered unless a master VPA is
* registered. That means when restoring state, if a VPA *is*
* registered, we need to set that up first. If not, we need to
* deregister the others before deregistering the master VPA
*/
assert(spapr_cpu->vpa_addr
|| !(spapr_cpu->slb_shadow_addr || spapr_cpu->dtl_addr));
if (spapr_cpu->vpa_addr) {
reg.id = KVM_REG_PPC_VPA_ADDR;
reg.addr = (uintptr_t)&spapr_cpu->vpa_addr;
ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg);
if (ret < 0) {
trace_kvm_failed_vpa_addr_set(strerror(errno));
return ret;
}
}
assert((uintptr_t)&spapr_cpu->slb_shadow_size
== ((uintptr_t)&spapr_cpu->slb_shadow_addr + 8));
reg.id = KVM_REG_PPC_VPA_SLB;
reg.addr = (uintptr_t)&spapr_cpu->slb_shadow_addr;
ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg);
if (ret < 0) {
trace_kvm_failed_slb_set(strerror(errno));
return ret;
}
assert((uintptr_t)&spapr_cpu->dtl_size
== ((uintptr_t)&spapr_cpu->dtl_addr + 8));
reg.id = KVM_REG_PPC_VPA_DTL;
reg.addr = (uintptr_t)&spapr_cpu->dtl_addr;
ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg);
if (ret < 0) {
trace_kvm_failed_dtl_set(strerror(errno));
return ret;
}
if (!spapr_cpu->vpa_addr) {
reg.id = KVM_REG_PPC_VPA_ADDR;
reg.addr = (uintptr_t)&spapr_cpu->vpa_addr;
ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg);
if (ret < 0) {
trace_kvm_failed_null_vpa_addr_set(strerror(errno));
return ret;
}
}
return 0;
}
#endif /* TARGET_PPC64 */
int kvmppc_put_books_sregs(PowerPCCPU *cpu)
{
CPUPPCState *env = &cpu->env;
target/ppc: init 'sregs' in kvmppc_put_books_sregs() Init 'sregs' to avoid Valgrind complaints about uninitialized bytes from kvmppc_put_books_sregs(): ==54059== Thread 3: ==54059== Syscall param ioctl(generic) points to uninitialised byte(s) ==54059== at 0x55864E4: ioctl (in /usr/lib64/libc.so.6) ==54059== by 0xD1FA23: kvm_vcpu_ioctl (kvm-all.c:3053) ==54059== by 0xAFB18B: kvmppc_put_books_sregs (kvm.c:891) ==54059== by 0xAFB47B: kvm_arch_put_registers (kvm.c:949) ==54059== by 0xD1EDA7: do_kvm_cpu_synchronize_post_init (kvm-all.c:2766) ==54059== by 0x481AF3: process_queued_cpu_work (cpus-common.c:343) ==54059== by 0x4EF247: qemu_wait_io_event_common (cpus.c:412) ==54059== by 0x4EF343: qemu_wait_io_event (cpus.c:436) ==54059== by 0xD21E83: kvm_vcpu_thread_fn (kvm-accel-ops.c:54) ==54059== by 0xFFEBF3: qemu_thread_start (qemu-thread-posix.c:556) ==54059== by 0x54E6DC3: start_thread (in /usr/lib64/libc.so.6) ==54059== by 0x5596C9F: clone (in /usr/lib64/libc.so.6) ==54059== Address 0x799d1cc is on thread 3's stack ==54059== in frame #2, created by kvmppc_put_books_sregs (kvm.c:851) ==54059== Uninitialised value was created by a stack allocation ==54059== at 0xAFAEB0: kvmppc_put_books_sregs (kvm.c:851) This happens because Valgrind does not consider the 'sregs' initialization done by kvm_vcpu_ioctl() at the end of the function. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-Id: <20220331001717.616938-4-danielhb413@gmail.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-03-31 03:17:16 +03:00
struct kvm_sregs sregs = { };
int i;
sregs.pvr = env->spr[SPR_PVR];
if (cpu->vhyp) {
PPCVirtualHypervisorClass *vhc =
PPC_VIRTUAL_HYPERVISOR_GET_CLASS(cpu->vhyp);
sregs.u.s.sdr1 = vhc->encode_hpt_for_kvm_pr(cpu->vhyp);
} else {
sregs.u.s.sdr1 = env->spr[SPR_SDR1];
}
/* Sync SLB */
#ifdef TARGET_PPC64
for (i = 0; i < ARRAY_SIZE(env->slb); i++) {
sregs.u.s.ppc64.slb[i].slbe = env->slb[i].esid;
if (env->slb[i].esid & SLB_ESID_V) {
sregs.u.s.ppc64.slb[i].slbe |= i;
}
sregs.u.s.ppc64.slb[i].slbv = env->slb[i].vsid;
}
#endif
/* Sync SRs */
for (i = 0; i < 16; i++) {
sregs.u.s.ppc32.sr[i] = env->sr[i];
}
/* Sync BATs */
for (i = 0; i < 8; i++) {
/* Beware. We have to swap upper and lower bits here */
sregs.u.s.ppc32.dbat[i] = ((uint64_t)env->DBAT[0][i] << 32)
| env->DBAT[1][i];
sregs.u.s.ppc32.ibat[i] = ((uint64_t)env->IBAT[0][i] << 32)
| env->IBAT[1][i];
}
return kvm_vcpu_ioctl(CPU(cpu), KVM_SET_SREGS, &sregs);
}
int kvm_arch_put_registers(CPUState *cs, int level)
{
PowerPCCPU *cpu = POWERPC_CPU(cs);
CPUPPCState *env = &cpu->env;
struct kvm_regs regs;
int ret;
int i;
ret = kvm_vcpu_ioctl(cs, KVM_GET_REGS, &regs);
if (ret < 0) {
return ret;
}
regs.ctr = env->ctr;
regs.lr = env->lr;
regs.xer = cpu_read_xer(env);
regs.msr = env->msr;
regs.pc = env->nip;
regs.srr0 = env->spr[SPR_SRR0];
regs.srr1 = env->spr[SPR_SRR1];
regs.sprg0 = env->spr[SPR_SPRG0];
regs.sprg1 = env->spr[SPR_SPRG1];
regs.sprg2 = env->spr[SPR_SPRG2];
regs.sprg3 = env->spr[SPR_SPRG3];
regs.sprg4 = env->spr[SPR_SPRG4];
regs.sprg5 = env->spr[SPR_SPRG5];
regs.sprg6 = env->spr[SPR_SPRG6];
regs.sprg7 = env->spr[SPR_SPRG7];
regs.pid = env->spr[SPR_BOOKE_PID];
for (i = 0; i < 32; i++) {
regs.gpr[i] = env->gpr[i];
}
regs.cr = ppc_get_cr(env);
ret = kvm_vcpu_ioctl(cs, KVM_SET_REGS, &regs);
if (ret < 0) {
return ret;
}
kvm_put_fp(cs);
if (env->tlb_dirty) {
kvm_sw_tlb_put(cpu);
env->tlb_dirty = false;
}
ppc: Make kvm_arch_put_registers() put *all* the registers At least when invoked with high enough 'level' arguments, kvm_arch_put_registers() is supposed to copy essentially all the cpu state as encoded in qemu's internal structures into the kvm state. Currently the ppc version does not do this - it never calls KVM_SET_SREGS, for example, and therefore never sets the SDR1 and various other important though rarely changed registers. Instead, the code paths which need to set these registers need to explicitly make (conditional) kvm calls which transfer the changes to kvm. This breaks the usual model of handling state updates in qemu, where code just changes the internal model and has it flushed out to kvm automatically at some later point. This patch fixes this for Book S ppc CPUs by adding a suitable call to KVM_SET_SREGS and als to KVM_SET_ONE_REG to set the HIOR (the only register that is set with that call so far). This lets us remove the hacks to explicitly set these registers from the kvmppc_set_papr() function. The problem still exists for Book E CPUs (which use a different version of the kvm_sregs structure). But fixing that has some complications of its own so can be left to another day. Lkewise, there is still some ugly code for setting the PVR through special calls to SET_SREGS which is left in for now. The PVR needs to be set especially early because it can affect what other features are available on the CPU, so I need to do more thinking to see if it can be integrated into the normal paths or not. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-09-12 20:57:09 +04:00
if (cap_segstate && (level >= KVM_PUT_RESET_STATE)) {
ret = kvmppc_put_books_sregs(cpu);
if (ret < 0) {
ppc: Make kvm_arch_put_registers() put *all* the registers At least when invoked with high enough 'level' arguments, kvm_arch_put_registers() is supposed to copy essentially all the cpu state as encoded in qemu's internal structures into the kvm state. Currently the ppc version does not do this - it never calls KVM_SET_SREGS, for example, and therefore never sets the SDR1 and various other important though rarely changed registers. Instead, the code paths which need to set these registers need to explicitly make (conditional) kvm calls which transfer the changes to kvm. This breaks the usual model of handling state updates in qemu, where code just changes the internal model and has it flushed out to kvm automatically at some later point. This patch fixes this for Book S ppc CPUs by adding a suitable call to KVM_SET_SREGS and als to KVM_SET_ONE_REG to set the HIOR (the only register that is set with that call so far). This lets us remove the hacks to explicitly set these registers from the kvmppc_set_papr() function. The problem still exists for Book E CPUs (which use a different version of the kvm_sregs structure). But fixing that has some complications of its own so can be left to another day. Lkewise, there is still some ugly code for setting the PVR through special calls to SET_SREGS which is left in for now. The PVR needs to be set especially early because it can affect what other features are available on the CPU, so I need to do more thinking to see if it can be integrated into the normal paths or not. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-09-12 20:57:09 +04:00
return ret;
}
}
if (cap_hior && (level >= KVM_PUT_RESET_STATE)) {
kvm_put_one_spr(cs, KVM_REG_PPC_HIOR, SPR_HIOR);
}
ppc: Make kvm_arch_put_registers() put *all* the registers At least when invoked with high enough 'level' arguments, kvm_arch_put_registers() is supposed to copy essentially all the cpu state as encoded in qemu's internal structures into the kvm state. Currently the ppc version does not do this - it never calls KVM_SET_SREGS, for example, and therefore never sets the SDR1 and various other important though rarely changed registers. Instead, the code paths which need to set these registers need to explicitly make (conditional) kvm calls which transfer the changes to kvm. This breaks the usual model of handling state updates in qemu, where code just changes the internal model and has it flushed out to kvm automatically at some later point. This patch fixes this for Book S ppc CPUs by adding a suitable call to KVM_SET_SREGS and als to KVM_SET_ONE_REG to set the HIOR (the only register that is set with that call so far). This lets us remove the hacks to explicitly set these registers from the kvmppc_set_papr() function. The problem still exists for Book E CPUs (which use a different version of the kvm_sregs structure). But fixing that has some complications of its own so can be left to another day. Lkewise, there is still some ugly code for setting the PVR through special calls to SET_SREGS which is left in for now. The PVR needs to be set especially early because it can affect what other features are available on the CPU, so I need to do more thinking to see if it can be integrated into the normal paths or not. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-09-12 20:57:09 +04:00
if (cap_one_reg) {
/*
* We deliberately ignore errors here, for kernels which have
* the ONE_REG calls, but don't support the specific
* registers, there's a reasonable chance things will still
* work, at least until we try to migrate.
*/
for (i = 0; i < 1024; i++) {
uint64_t id = env->spr_cb[i].one_reg_id;
if (id != 0) {
kvm_put_one_spr(cs, id, i);
}
ppc: Make kvm_arch_put_registers() put *all* the registers At least when invoked with high enough 'level' arguments, kvm_arch_put_registers() is supposed to copy essentially all the cpu state as encoded in qemu's internal structures into the kvm state. Currently the ppc version does not do this - it never calls KVM_SET_SREGS, for example, and therefore never sets the SDR1 and various other important though rarely changed registers. Instead, the code paths which need to set these registers need to explicitly make (conditional) kvm calls which transfer the changes to kvm. This breaks the usual model of handling state updates in qemu, where code just changes the internal model and has it flushed out to kvm automatically at some later point. This patch fixes this for Book S ppc CPUs by adding a suitable call to KVM_SET_SREGS and als to KVM_SET_ONE_REG to set the HIOR (the only register that is set with that call so far). This lets us remove the hacks to explicitly set these registers from the kvmppc_set_papr() function. The problem still exists for Book E CPUs (which use a different version of the kvm_sregs structure). But fixing that has some complications of its own so can be left to another day. Lkewise, there is still some ugly code for setting the PVR through special calls to SET_SREGS which is left in for now. The PVR needs to be set especially early because it can affect what other features are available on the CPU, so I need to do more thinking to see if it can be integrated into the normal paths or not. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-09-12 20:57:09 +04:00
}
#ifdef TARGET_PPC64
if (FIELD_EX64(env->msr, MSR, TS)) {
for (i = 0; i < ARRAY_SIZE(env->tm_gpr); i++) {
kvm_set_one_reg(cs, KVM_REG_PPC_TM_GPR(i), &env->tm_gpr[i]);
}
for (i = 0; i < ARRAY_SIZE(env->tm_vsr); i++) {
kvm_set_one_reg(cs, KVM_REG_PPC_TM_VSR(i), &env->tm_vsr[i]);
}
kvm_set_one_reg(cs, KVM_REG_PPC_TM_CR, &env->tm_cr);
kvm_set_one_reg(cs, KVM_REG_PPC_TM_LR, &env->tm_lr);
kvm_set_one_reg(cs, KVM_REG_PPC_TM_CTR, &env->tm_ctr);
kvm_set_one_reg(cs, KVM_REG_PPC_TM_FPSCR, &env->tm_fpscr);
kvm_set_one_reg(cs, KVM_REG_PPC_TM_AMR, &env->tm_amr);
kvm_set_one_reg(cs, KVM_REG_PPC_TM_PPR, &env->tm_ppr);
kvm_set_one_reg(cs, KVM_REG_PPC_TM_VRSAVE, &env->tm_vrsave);
kvm_set_one_reg(cs, KVM_REG_PPC_TM_VSCR, &env->tm_vscr);
kvm_set_one_reg(cs, KVM_REG_PPC_TM_DSCR, &env->tm_dscr);
kvm_set_one_reg(cs, KVM_REG_PPC_TM_TAR, &env->tm_tar);
}
if (cap_papr) {
if (kvm_put_vpa(cs) < 0) {
trace_kvm_failed_put_vpa();
}
}
kvm_set_one_reg(cs, KVM_REG_PPC_TB_OFFSET, &env->tb_env->tb_offset);
if (level > KVM_PUT_RUNTIME_STATE) {
kvm_put_one_spr(cs, KVM_REG_PPC_DPDES, SPR_DPDES);
}
#endif /* TARGET_PPC64 */
ppc: Make kvm_arch_put_registers() put *all* the registers At least when invoked with high enough 'level' arguments, kvm_arch_put_registers() is supposed to copy essentially all the cpu state as encoded in qemu's internal structures into the kvm state. Currently the ppc version does not do this - it never calls KVM_SET_SREGS, for example, and therefore never sets the SDR1 and various other important though rarely changed registers. Instead, the code paths which need to set these registers need to explicitly make (conditional) kvm calls which transfer the changes to kvm. This breaks the usual model of handling state updates in qemu, where code just changes the internal model and has it flushed out to kvm automatically at some later point. This patch fixes this for Book S ppc CPUs by adding a suitable call to KVM_SET_SREGS and als to KVM_SET_ONE_REG to set the HIOR (the only register that is set with that call so far). This lets us remove the hacks to explicitly set these registers from the kvmppc_set_papr() function. The problem still exists for Book E CPUs (which use a different version of the kvm_sregs structure). But fixing that has some complications of its own so can be left to another day. Lkewise, there is still some ugly code for setting the PVR through special calls to SET_SREGS which is left in for now. The PVR needs to be set especially early because it can affect what other features are available on the CPU, so I need to do more thinking to see if it can be integrated into the normal paths or not. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-09-12 20:57:09 +04:00
}
return ret;
}
static void kvm_sync_excp(CPUPPCState *env, int vector, int ivor)
{
env->excp_vectors[vector] = env->spr[ivor] + env->spr[SPR_BOOKE_IVPR];
}
static int kvmppc_get_booke_sregs(PowerPCCPU *cpu)
{
CPUPPCState *env = &cpu->env;
struct kvm_sregs sregs;
int ret;
ret = kvm_vcpu_ioctl(CPU(cpu), KVM_GET_SREGS, &sregs);
if (ret < 0) {
return ret;
}
if (sregs.u.e.features & KVM_SREGS_E_BASE) {
env->spr[SPR_BOOKE_CSRR0] = sregs.u.e.csrr0;
env->spr[SPR_BOOKE_CSRR1] = sregs.u.e.csrr1;
env->spr[SPR_BOOKE_ESR] = sregs.u.e.esr;
env->spr[SPR_BOOKE_DEAR] = sregs.u.e.dear;
env->spr[SPR_BOOKE_MCSR] = sregs.u.e.mcsr;
env->spr[SPR_BOOKE_TSR] = sregs.u.e.tsr;
env->spr[SPR_BOOKE_TCR] = sregs.u.e.tcr;
env->spr[SPR_DECR] = sregs.u.e.dec;
env->spr[SPR_TBL] = sregs.u.e.tb & 0xffffffff;
env->spr[SPR_TBU] = sregs.u.e.tb >> 32;
env->spr[SPR_VRSAVE] = sregs.u.e.vrsave;
}
if (sregs.u.e.features & KVM_SREGS_E_ARCH206) {
env->spr[SPR_BOOKE_PIR] = sregs.u.e.pir;
env->spr[SPR_BOOKE_MCSRR0] = sregs.u.e.mcsrr0;
env->spr[SPR_BOOKE_MCSRR1] = sregs.u.e.mcsrr1;
env->spr[SPR_BOOKE_DECAR] = sregs.u.e.decar;
env->spr[SPR_BOOKE_IVPR] = sregs.u.e.ivpr;
}
if (sregs.u.e.features & KVM_SREGS_E_64) {
env->spr[SPR_BOOKE_EPCR] = sregs.u.e.epcr;
}
if (sregs.u.e.features & KVM_SREGS_E_SPRG8) {
env->spr[SPR_BOOKE_SPRG8] = sregs.u.e.sprg8;
}
if (sregs.u.e.features & KVM_SREGS_E_IVOR) {
env->spr[SPR_BOOKE_IVOR0] = sregs.u.e.ivor_low[0];
kvm_sync_excp(env, POWERPC_EXCP_CRITICAL, SPR_BOOKE_IVOR0);
env->spr[SPR_BOOKE_IVOR1] = sregs.u.e.ivor_low[1];
kvm_sync_excp(env, POWERPC_EXCP_MCHECK, SPR_BOOKE_IVOR1);
env->spr[SPR_BOOKE_IVOR2] = sregs.u.e.ivor_low[2];
kvm_sync_excp(env, POWERPC_EXCP_DSI, SPR_BOOKE_IVOR2);
env->spr[SPR_BOOKE_IVOR3] = sregs.u.e.ivor_low[3];
kvm_sync_excp(env, POWERPC_EXCP_ISI, SPR_BOOKE_IVOR3);
env->spr[SPR_BOOKE_IVOR4] = sregs.u.e.ivor_low[4];
kvm_sync_excp(env, POWERPC_EXCP_EXTERNAL, SPR_BOOKE_IVOR4);
env->spr[SPR_BOOKE_IVOR5] = sregs.u.e.ivor_low[5];
kvm_sync_excp(env, POWERPC_EXCP_ALIGN, SPR_BOOKE_IVOR5);
env->spr[SPR_BOOKE_IVOR6] = sregs.u.e.ivor_low[6];
kvm_sync_excp(env, POWERPC_EXCP_PROGRAM, SPR_BOOKE_IVOR6);
env->spr[SPR_BOOKE_IVOR7] = sregs.u.e.ivor_low[7];
kvm_sync_excp(env, POWERPC_EXCP_FPU, SPR_BOOKE_IVOR7);
env->spr[SPR_BOOKE_IVOR8] = sregs.u.e.ivor_low[8];
kvm_sync_excp(env, POWERPC_EXCP_SYSCALL, SPR_BOOKE_IVOR8);
env->spr[SPR_BOOKE_IVOR9] = sregs.u.e.ivor_low[9];
kvm_sync_excp(env, POWERPC_EXCP_APU, SPR_BOOKE_IVOR9);
env->spr[SPR_BOOKE_IVOR10] = sregs.u.e.ivor_low[10];
kvm_sync_excp(env, POWERPC_EXCP_DECR, SPR_BOOKE_IVOR10);
env->spr[SPR_BOOKE_IVOR11] = sregs.u.e.ivor_low[11];
kvm_sync_excp(env, POWERPC_EXCP_FIT, SPR_BOOKE_IVOR11);
env->spr[SPR_BOOKE_IVOR12] = sregs.u.e.ivor_low[12];
kvm_sync_excp(env, POWERPC_EXCP_WDT, SPR_BOOKE_IVOR12);
env->spr[SPR_BOOKE_IVOR13] = sregs.u.e.ivor_low[13];
kvm_sync_excp(env, POWERPC_EXCP_DTLB, SPR_BOOKE_IVOR13);
env->spr[SPR_BOOKE_IVOR14] = sregs.u.e.ivor_low[14];
kvm_sync_excp(env, POWERPC_EXCP_ITLB, SPR_BOOKE_IVOR14);
env->spr[SPR_BOOKE_IVOR15] = sregs.u.e.ivor_low[15];
kvm_sync_excp(env, POWERPC_EXCP_DEBUG, SPR_BOOKE_IVOR15);
if (sregs.u.e.features & KVM_SREGS_E_SPE) {
env->spr[SPR_BOOKE_IVOR32] = sregs.u.e.ivor_high[0];
kvm_sync_excp(env, POWERPC_EXCP_SPEU, SPR_BOOKE_IVOR32);
env->spr[SPR_BOOKE_IVOR33] = sregs.u.e.ivor_high[1];
kvm_sync_excp(env, POWERPC_EXCP_EFPDI, SPR_BOOKE_IVOR33);
env->spr[SPR_BOOKE_IVOR34] = sregs.u.e.ivor_high[2];
kvm_sync_excp(env, POWERPC_EXCP_EFPRI, SPR_BOOKE_IVOR34);
}
if (sregs.u.e.features & KVM_SREGS_E_PM) {
env->spr[SPR_BOOKE_IVOR35] = sregs.u.e.ivor_high[3];
kvm_sync_excp(env, POWERPC_EXCP_EPERFM, SPR_BOOKE_IVOR35);
}
if (sregs.u.e.features & KVM_SREGS_E_PC) {
env->spr[SPR_BOOKE_IVOR36] = sregs.u.e.ivor_high[4];
kvm_sync_excp(env, POWERPC_EXCP_DOORI, SPR_BOOKE_IVOR36);
env->spr[SPR_BOOKE_IVOR37] = sregs.u.e.ivor_high[5];
kvm_sync_excp(env, POWERPC_EXCP_DOORCI, SPR_BOOKE_IVOR37);
}
}
if (sregs.u.e.features & KVM_SREGS_E_ARCH206_MMU) {
env->spr[SPR_BOOKE_MAS0] = sregs.u.e.mas0;
env->spr[SPR_BOOKE_MAS1] = sregs.u.e.mas1;
env->spr[SPR_BOOKE_MAS2] = sregs.u.e.mas2;
env->spr[SPR_BOOKE_MAS3] = sregs.u.e.mas7_3 & 0xffffffff;
env->spr[SPR_BOOKE_MAS4] = sregs.u.e.mas4;
env->spr[SPR_BOOKE_MAS6] = sregs.u.e.mas6;
env->spr[SPR_BOOKE_MAS7] = sregs.u.e.mas7_3 >> 32;
env->spr[SPR_MMUCFG] = sregs.u.e.mmucfg;
env->spr[SPR_BOOKE_TLB0CFG] = sregs.u.e.tlbcfg[0];
env->spr[SPR_BOOKE_TLB1CFG] = sregs.u.e.tlbcfg[1];
}
if (sregs.u.e.features & KVM_SREGS_EXP) {
env->spr[SPR_BOOKE_EPR] = sregs.u.e.epr;
}
if (sregs.u.e.features & KVM_SREGS_E_PD) {
env->spr[SPR_BOOKE_EPLC] = sregs.u.e.eplc;
env->spr[SPR_BOOKE_EPSC] = sregs.u.e.epsc;
}
if (sregs.u.e.impl_id == KVM_SREGS_E_IMPL_FSL) {
env->spr[SPR_E500_SVR] = sregs.u.e.impl.fsl.svr;
env->spr[SPR_Exxx_MCAR] = sregs.u.e.impl.fsl.mcar;
env->spr[SPR_HID0] = sregs.u.e.impl.fsl.hid0;
if (sregs.u.e.impl.fsl.features & KVM_SREGS_E_FSL_PIDn) {
env->spr[SPR_BOOKE_PID1] = sregs.u.e.impl.fsl.pid1;
env->spr[SPR_BOOKE_PID2] = sregs.u.e.impl.fsl.pid2;
}
}
return 0;
}
static int kvmppc_get_books_sregs(PowerPCCPU *cpu)
{
CPUPPCState *env = &cpu->env;
struct kvm_sregs sregs;
int ret;
int i;
ret = kvm_vcpu_ioctl(CPU(cpu), KVM_GET_SREGS, &sregs);
if (ret < 0) {
return ret;
}
if (!cpu->vhyp) {
ppc_store_sdr1(env, sregs.u.s.sdr1);
}
/* Sync SLB */
#ifdef TARGET_PPC64
/*
* The packed SLB array we get from KVM_GET_SREGS only contains
* information about valid entries. So we flush our internal copy
* to get rid of stale ones, then put all valid SLB entries back
* in.
*/
memset(env->slb, 0, sizeof(env->slb));
for (i = 0; i < ARRAY_SIZE(env->slb); i++) {
target_ulong rb = sregs.u.s.ppc64.slb[i].slbe;
target_ulong rs = sregs.u.s.ppc64.slb[i].slbv;
/*
* Only restore valid entries
*/
if (rb & SLB_ESID_V) {
ppc_store_slb(cpu, rb & 0xfff, rb & ~0xfffULL, rs);
}
}
#endif
/* Sync SRs */
for (i = 0; i < 16; i++) {
env->sr[i] = sregs.u.s.ppc32.sr[i];
}
/* Sync BATs */
for (i = 0; i < 8; i++) {
env->DBAT[0][i] = sregs.u.s.ppc32.dbat[i] & 0xffffffff;
env->DBAT[1][i] = sregs.u.s.ppc32.dbat[i] >> 32;
env->IBAT[0][i] = sregs.u.s.ppc32.ibat[i] & 0xffffffff;
env->IBAT[1][i] = sregs.u.s.ppc32.ibat[i] >> 32;
}
return 0;
}
int kvm_arch_get_registers(CPUState *cs)
{
PowerPCCPU *cpu = POWERPC_CPU(cs);
CPUPPCState *env = &cpu->env;
struct kvm_regs regs;
int i, ret;
ret = kvm_vcpu_ioctl(cs, KVM_GET_REGS, &regs);
if (ret < 0) {
return ret;
}
ppc_set_cr(env, regs.cr);
env->ctr = regs.ctr;
env->lr = regs.lr;
cpu_write_xer(env, regs.xer);
env->msr = regs.msr;
env->nip = regs.pc;
env->spr[SPR_SRR0] = regs.srr0;
env->spr[SPR_SRR1] = regs.srr1;
env->spr[SPR_SPRG0] = regs.sprg0;
env->spr[SPR_SPRG1] = regs.sprg1;
env->spr[SPR_SPRG2] = regs.sprg2;
env->spr[SPR_SPRG3] = regs.sprg3;
env->spr[SPR_SPRG4] = regs.sprg4;
env->spr[SPR_SPRG5] = regs.sprg5;
env->spr[SPR_SPRG6] = regs.sprg6;
env->spr[SPR_SPRG7] = regs.sprg7;
env->spr[SPR_BOOKE_PID] = regs.pid;
for (i = 0; i < 32; i++) {
env->gpr[i] = regs.gpr[i];
}
kvm_get_fp(cs);
if (cap_booke_sregs) {
ret = kvmppc_get_booke_sregs(cpu);
if (ret < 0) {
return ret;
}
}
if (cap_segstate) {
ret = kvmppc_get_books_sregs(cpu);
if (ret < 0) {
return ret;
}
}
if (cap_hior) {
kvm_get_one_spr(cs, KVM_REG_PPC_HIOR, SPR_HIOR);
}
if (cap_one_reg) {
/*
* We deliberately ignore errors here, for kernels which have
* the ONE_REG calls, but don't support the specific
* registers, there's a reasonable chance things will still
* work, at least until we try to migrate.
*/
for (i = 0; i < 1024; i++) {
uint64_t id = env->spr_cb[i].one_reg_id;
if (id != 0) {
kvm_get_one_spr(cs, id, i);
}
}
#ifdef TARGET_PPC64
if (FIELD_EX64(env->msr, MSR, TS)) {
for (i = 0; i < ARRAY_SIZE(env->tm_gpr); i++) {
kvm_get_one_reg(cs, KVM_REG_PPC_TM_GPR(i), &env->tm_gpr[i]);
}
for (i = 0; i < ARRAY_SIZE(env->tm_vsr); i++) {
kvm_get_one_reg(cs, KVM_REG_PPC_TM_VSR(i), &env->tm_vsr[i]);
}
kvm_get_one_reg(cs, KVM_REG_PPC_TM_CR, &env->tm_cr);
kvm_get_one_reg(cs, KVM_REG_PPC_TM_LR, &env->tm_lr);
kvm_get_one_reg(cs, KVM_REG_PPC_TM_CTR, &env->tm_ctr);
kvm_get_one_reg(cs, KVM_REG_PPC_TM_FPSCR, &env->tm_fpscr);
kvm_get_one_reg(cs, KVM_REG_PPC_TM_AMR, &env->tm_amr);
kvm_get_one_reg(cs, KVM_REG_PPC_TM_PPR, &env->tm_ppr);
kvm_get_one_reg(cs, KVM_REG_PPC_TM_VRSAVE, &env->tm_vrsave);
kvm_get_one_reg(cs, KVM_REG_PPC_TM_VSCR, &env->tm_vscr);
kvm_get_one_reg(cs, KVM_REG_PPC_TM_DSCR, &env->tm_dscr);
kvm_get_one_reg(cs, KVM_REG_PPC_TM_TAR, &env->tm_tar);
}
if (cap_papr) {
if (kvm_get_vpa(cs) < 0) {
trace_kvm_failed_get_vpa();
}
}
kvm_get_one_reg(cs, KVM_REG_PPC_TB_OFFSET, &env->tb_env->tb_offset);
kvm_get_one_spr(cs, KVM_REG_PPC_DPDES, SPR_DPDES);
#endif
}
return 0;
}
int kvmppc_set_interrupt(PowerPCCPU *cpu, int irq, int level)
{
unsigned virq = level ? KVM_INTERRUPT_SET_LEVEL : KVM_INTERRUPT_UNSET;
if (irq != PPC_INTERRUPT_EXT) {
return 0;
}
if (!cap_interrupt_unset) {
return 0;
}
kvm_vcpu_ioctl(CPU(cpu), KVM_INTERRUPT, &virq);
return 0;
}
void kvm_arch_pre_run(CPUState *cs, struct kvm_run *run)
{
return;
}
MemTxAttrs kvm_arch_post_run(CPUState *cs, struct kvm_run *run)
{
return MEMTXATTRS_UNSPECIFIED;
}
int kvm_arch_process_async_events(CPUState *cs)
{
return cs->halted;
}
static int kvmppc_handle_halt(PowerPCCPU *cpu)
{
CPUState *cs = CPU(cpu);
CPUPPCState *env = &cpu->env;
if (!(cs->interrupt_request & CPU_INTERRUPT_HARD) &&
FIELD_EX64(env->msr, MSR, EE)) {
cs->halted = 1;
cs->exception_index = EXCP_HLT;
}
return 0;
}
/* map dcr access to existing qemu dcr emulation */
static int kvmppc_handle_dcr_read(CPUPPCState *env,
uint32_t dcrn, uint32_t *data)
{
if (ppc_dcr_read(env->dcr_env, dcrn, data) < 0) {
fprintf(stderr, "Read to unhandled DCR (0x%x)\n", dcrn);
}
return 0;
}
static int kvmppc_handle_dcr_write(CPUPPCState *env,
uint32_t dcrn, uint32_t data)
{
if (ppc_dcr_write(env->dcr_env, dcrn, data) < 0) {
fprintf(stderr, "Write to unhandled DCR (0x%x)\n", dcrn);
}
return 0;
}
int kvm_arch_insert_sw_breakpoint(CPUState *cs, struct kvm_sw_breakpoint *bp)
{
/* Mixed endian case is not handled */
uint32_t sc = debug_inst_opcode;
if (cpu_memory_rw_debug(cs, bp->pc, (uint8_t *)&bp->saved_insn,
sizeof(sc), 0) ||
cpu_memory_rw_debug(cs, bp->pc, (uint8_t *)&sc, sizeof(sc), 1)) {
return -EINVAL;
}
return 0;
}
int kvm_arch_remove_sw_breakpoint(CPUState *cs, struct kvm_sw_breakpoint *bp)
{
uint32_t sc;
if (cpu_memory_rw_debug(cs, bp->pc, (uint8_t *)&sc, sizeof(sc), 0) ||
sc != debug_inst_opcode ||
cpu_memory_rw_debug(cs, bp->pc, (uint8_t *)&bp->saved_insn,
sizeof(sc), 1)) {
return -EINVAL;
}
return 0;
}
static int find_hw_breakpoint(target_ulong addr, int type)
{
int n;
assert((nb_hw_breakpoint + nb_hw_watchpoint)
<= ARRAY_SIZE(hw_debug_points));
for (n = 0; n < nb_hw_breakpoint + nb_hw_watchpoint; n++) {
if (hw_debug_points[n].addr == addr &&
hw_debug_points[n].type == type) {
return n;
}
}
return -1;
}
static int find_hw_watchpoint(target_ulong addr, int *flag)
{
int n;
n = find_hw_breakpoint(addr, GDB_WATCHPOINT_ACCESS);
if (n >= 0) {
*flag = BP_MEM_ACCESS;
return n;
}
n = find_hw_breakpoint(addr, GDB_WATCHPOINT_WRITE);
if (n >= 0) {
*flag = BP_MEM_WRITE;
return n;
}
n = find_hw_breakpoint(addr, GDB_WATCHPOINT_READ);
if (n >= 0) {
*flag = BP_MEM_READ;
return n;
}
return -1;
}
int kvm_arch_insert_hw_breakpoint(vaddr addr, vaddr len, int type)
{
const unsigned breakpoint_index = nb_hw_breakpoint + nb_hw_watchpoint;
if (breakpoint_index >= ARRAY_SIZE(hw_debug_points)) {
return -ENOBUFS;
}
hw_debug_points[breakpoint_index].addr = addr;
hw_debug_points[breakpoint_index].type = type;
switch (type) {
case GDB_BREAKPOINT_HW:
if (nb_hw_breakpoint >= max_hw_breakpoint) {
return -ENOBUFS;
}
if (find_hw_breakpoint(addr, type) >= 0) {
return -EEXIST;
}
nb_hw_breakpoint++;
break;
case GDB_WATCHPOINT_WRITE:
case GDB_WATCHPOINT_READ:
case GDB_WATCHPOINT_ACCESS:
if (nb_hw_watchpoint >= max_hw_watchpoint) {
return -ENOBUFS;
}
if (find_hw_breakpoint(addr, type) >= 0) {
return -EEXIST;
}
nb_hw_watchpoint++;
break;
default:
return -ENOSYS;
}
return 0;
}
int kvm_arch_remove_hw_breakpoint(vaddr addr, vaddr len, int type)
{
int n;
n = find_hw_breakpoint(addr, type);
if (n < 0) {
return -ENOENT;
}
switch (type) {
case GDB_BREAKPOINT_HW:
nb_hw_breakpoint--;
break;
case GDB_WATCHPOINT_WRITE:
case GDB_WATCHPOINT_READ:
case GDB_WATCHPOINT_ACCESS:
nb_hw_watchpoint--;
break;
default:
return -ENOSYS;
}
hw_debug_points[n] = hw_debug_points[nb_hw_breakpoint + nb_hw_watchpoint];
return 0;
}
void kvm_arch_remove_all_hw_breakpoints(void)
{
nb_hw_breakpoint = nb_hw_watchpoint = 0;
}
void kvm_arch_update_guest_debug(CPUState *cs, struct kvm_guest_debug *dbg)
{
int n;
/* Software Breakpoint updates */
if (kvm_sw_breakpoints_active(cs)) {
dbg->control |= KVM_GUESTDBG_ENABLE | KVM_GUESTDBG_USE_SW_BP;
}
assert((nb_hw_breakpoint + nb_hw_watchpoint)
<= ARRAY_SIZE(hw_debug_points));
assert((nb_hw_breakpoint + nb_hw_watchpoint) <= ARRAY_SIZE(dbg->arch.bp));
if (nb_hw_breakpoint + nb_hw_watchpoint > 0) {
dbg->control |= KVM_GUESTDBG_ENABLE | KVM_GUESTDBG_USE_HW_BP;
memset(dbg->arch.bp, 0, sizeof(dbg->arch.bp));
for (n = 0; n < nb_hw_breakpoint + nb_hw_watchpoint; n++) {
switch (hw_debug_points[n].type) {
case GDB_BREAKPOINT_HW:
dbg->arch.bp[n].type = KVMPPC_DEBUG_BREAKPOINT;
break;
case GDB_WATCHPOINT_WRITE:
dbg->arch.bp[n].type = KVMPPC_DEBUG_WATCH_WRITE;
break;
case GDB_WATCHPOINT_READ:
dbg->arch.bp[n].type = KVMPPC_DEBUG_WATCH_READ;
break;
case GDB_WATCHPOINT_ACCESS:
dbg->arch.bp[n].type = KVMPPC_DEBUG_WATCH_WRITE |
KVMPPC_DEBUG_WATCH_READ;
break;
default:
cpu_abort(cs, "Unsupported breakpoint type\n");
}
dbg->arch.bp[n].addr = hw_debug_points[n].addr;
}
}
}
static int kvm_handle_hw_breakpoint(CPUState *cs,
struct kvm_debug_exit_arch *arch_info)
{
int handle = DEBUG_RETURN_GUEST;
int n;
int flag = 0;
if (nb_hw_breakpoint + nb_hw_watchpoint > 0) {
if (arch_info->status & KVMPPC_DEBUG_BREAKPOINT) {
n = find_hw_breakpoint(arch_info->address, GDB_BREAKPOINT_HW);
if (n >= 0) {
handle = DEBUG_RETURN_GDB;
}
} else if (arch_info->status & (KVMPPC_DEBUG_WATCH_READ |
KVMPPC_DEBUG_WATCH_WRITE)) {
n = find_hw_watchpoint(arch_info->address, &flag);
if (n >= 0) {
handle = DEBUG_RETURN_GDB;
cs->watchpoint_hit = &hw_watchpoint;
hw_watchpoint.vaddr = hw_debug_points[n].addr;
hw_watchpoint.flags = flag;
}
}
}
return handle;
}
static int kvm_handle_singlestep(void)
{
return DEBUG_RETURN_GDB;
}
static int kvm_handle_sw_breakpoint(void)
{
return DEBUG_RETURN_GDB;
}
static int kvm_handle_debug(PowerPCCPU *cpu, struct kvm_run *run)
{
CPUState *cs = CPU(cpu);
CPUPPCState *env = &cpu->env;
struct kvm_debug_exit_arch *arch_info = &run->debug.arch;
if (cs->singlestep_enabled) {
return kvm_handle_singlestep();
}
if (arch_info->status) {
return kvm_handle_hw_breakpoint(cs, arch_info);
}
if (kvm_find_sw_breakpoint(cs, arch_info->address)) {
return kvm_handle_sw_breakpoint();
}
/*
* QEMU is not able to handle debug exception, so inject
* program exception to guest;
* Yes program exception NOT debug exception !!
* When QEMU is using debug resources then debug exception must
* be always set. To achieve this we set MSR_DE and also set
* MSRP_DEP so guest cannot change MSR_DE.
* When emulating debug resource for guest we want guest
* to control MSR_DE (enable/disable debug interrupt on need).
* Supporting both configurations are NOT possible.
* So the result is that we cannot share debug resources
* between QEMU and Guest on BOOKE architecture.
* In the current design QEMU gets the priority over guest,
* this means that if QEMU is using debug resources then guest
* cannot use them;
* For software breakpoint QEMU uses a privileged instruction;
* So there cannot be any reason that we are here for guest
* set debug exception, only possibility is guest executed a
* privileged / illegal instruction and that's why we are
* injecting a program interrupt.
*/
cpu_synchronize_state(cs);
/*
* env->nip is PC, so increment this by 4 to use
* ppc_cpu_do_interrupt(), which set srr0 = env->nip - 4.
*/
env->nip += 4;
cs->exception_index = POWERPC_EXCP_PROGRAM;
env->error_code = POWERPC_EXCP_INVAL;
ppc_cpu_do_interrupt(cs);
return DEBUG_RETURN_GUEST;
}
int kvm_arch_handle_exit(CPUState *cs, struct kvm_run *run)
{
PowerPCCPU *cpu = POWERPC_CPU(cs);
CPUPPCState *env = &cpu->env;
int ret;
system/cpus: rename qemu_mutex_lock_iothread() to bql_lock() The Big QEMU Lock (BQL) has many names and they are confusing. The actual QemuMutex variable is called qemu_global_mutex but it's commonly referred to as the BQL in discussions and some code comments. The locking APIs, however, are called qemu_mutex_lock_iothread() and qemu_mutex_unlock_iothread(). The "iothread" name is historic and comes from when the main thread was split into into KVM vcpu threads and the "iothread" (now called the main loop thread). I have contributed to the confusion myself by introducing a separate --object iothread, a separate concept unrelated to the BQL. The "iothread" name is no longer appropriate for the BQL. Rename the locking APIs to: - void bql_lock(void) - void bql_unlock(void) - bool bql_locked(void) There are more APIs with "iothread" in their names. Subsequent patches will rename them. There are also comments and documentation that will be updated in later patches. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paul Durrant <paul@xen.org> Acked-by: Fabiano Rosas <farosas@suse.de> Acked-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Cédric Le Goater <clg@kaod.org> Acked-by: Peter Xu <peterx@redhat.com> Acked-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com> Acked-by: Hyman Huang <yong.huang@smartx.com> Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com> Message-id: 20240102153529.486531-2-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2024-01-02 18:35:25 +03:00
bql_lock();
switch (run->exit_reason) {
case KVM_EXIT_DCR:
if (run->dcr.is_write) {
trace_kvm_handle_dcr_write();
ret = kvmppc_handle_dcr_write(env, run->dcr.dcrn, run->dcr.data);
} else {
trace_kvm_handle_dcr_read();
ret = kvmppc_handle_dcr_read(env, run->dcr.dcrn, &run->dcr.data);
}
break;
case KVM_EXIT_HLT:
trace_kvm_handle_halt();
ret = kvmppc_handle_halt(cpu);
break;
#if defined(TARGET_PPC64)
case KVM_EXIT_PAPR_HCALL:
trace_kvm_handle_papr_hcall(run->papr_hcall.nr);
run->papr_hcall.ret = spapr_hypercall(cpu,
run->papr_hcall.nr,
run->papr_hcall.args);
ret = 0;
break;
#endif
case KVM_EXIT_EPR:
trace_kvm_handle_epr();
run->epr.epr = ldl_phys(cs->as, env->mpic_iack);
ret = 0;
break;
case KVM_EXIT_WATCHDOG:
trace_kvm_handle_watchdog_expiry();
watchdog_perform_action();
ret = 0;
break;
case KVM_EXIT_DEBUG:
trace_kvm_handle_debug_exception();
if (kvm_handle_debug(cpu, run)) {
ret = EXCP_DEBUG;
break;
}
/* re-enter, this exception was guest-internal */
ret = 0;
break;
#if defined(TARGET_PPC64)
case KVM_EXIT_NMI:
trace_kvm_handle_nmi_exception();
ret = kvm_handle_nmi(cpu, run);
break;
#endif
default:
fprintf(stderr, "KVM: unknown exit reason %d\n", run->exit_reason);
ret = -1;
break;
}
system/cpus: rename qemu_mutex_lock_iothread() to bql_lock() The Big QEMU Lock (BQL) has many names and they are confusing. The actual QemuMutex variable is called qemu_global_mutex but it's commonly referred to as the BQL in discussions and some code comments. The locking APIs, however, are called qemu_mutex_lock_iothread() and qemu_mutex_unlock_iothread(). The "iothread" name is historic and comes from when the main thread was split into into KVM vcpu threads and the "iothread" (now called the main loop thread). I have contributed to the confusion myself by introducing a separate --object iothread, a separate concept unrelated to the BQL. The "iothread" name is no longer appropriate for the BQL. Rename the locking APIs to: - void bql_lock(void) - void bql_unlock(void) - bool bql_locked(void) There are more APIs with "iothread" in their names. Subsequent patches will rename them. There are also comments and documentation that will be updated in later patches. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paul Durrant <paul@xen.org> Acked-by: Fabiano Rosas <farosas@suse.de> Acked-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Cédric Le Goater <clg@kaod.org> Acked-by: Peter Xu <peterx@redhat.com> Acked-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com> Acked-by: Hyman Huang <yong.huang@smartx.com> Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com> Message-id: 20240102153529.486531-2-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2024-01-02 18:35:25 +03:00
bql_unlock();
return ret;
}
int kvmppc_or_tsr_bits(PowerPCCPU *cpu, uint32_t tsr_bits)
{
CPUState *cs = CPU(cpu);
uint32_t bits = tsr_bits;
struct kvm_one_reg reg = {
.id = KVM_REG_PPC_OR_TSR,
.addr = (uintptr_t) &bits,
};
if (!kvm_enabled()) {
return 0;
}
return kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg);
}
int kvmppc_clear_tsr_bits(PowerPCCPU *cpu, uint32_t tsr_bits)
{
CPUState *cs = CPU(cpu);
uint32_t bits = tsr_bits;
struct kvm_one_reg reg = {
.id = KVM_REG_PPC_CLEAR_TSR,
.addr = (uintptr_t) &bits,
};
if (!kvm_enabled()) {
return 0;
}
return kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg);
}
int kvmppc_set_tcr(PowerPCCPU *cpu)
{
CPUState *cs = CPU(cpu);
CPUPPCState *env = &cpu->env;
uint32_t tcr = env->spr[SPR_BOOKE_TCR];
struct kvm_one_reg reg = {
.id = KVM_REG_PPC_TCR,
.addr = (uintptr_t) &tcr,
};
if (!kvm_enabled()) {
return 0;
}
return kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg);
}
int kvmppc_booke_watchdog_enable(PowerPCCPU *cpu)
{
CPUState *cs = CPU(cpu);
int ret;
if (!kvm_enabled()) {
return -1;
}
if (!cap_ppc_watchdog) {
printf("warning: KVM does not support watchdog");
return -1;
}
ret = kvm_vcpu_enable_cap(cs, KVM_CAP_PPC_BOOKE_WATCHDOG, 0);
if (ret < 0) {
fprintf(stderr, "%s: couldn't enable KVM_CAP_PPC_BOOKE_WATCHDOG: %s\n",
__func__, strerror(-ret));
return ret;
}
return ret;
}
static int read_cpuinfo(const char *field, char *value, int len)
{
FILE *f;
int ret = -1;
int field_len = strlen(field);
char line[512];
f = fopen("/proc/cpuinfo", "r");
if (!f) {
return -1;
}
do {
if (!fgets(line, sizeof(line), f)) {
break;
}
if (!strncmp(line, field, field_len)) {
pstrcpy(value, len, line);
ret = 0;
break;
}
} while (*line);
fclose(f);
return ret;
}
static uint32_t kvmppc_get_tbfreq_procfs(void)
{
char line[512];
char *ns;
uint32_t tbfreq_fallback = NANOSECONDS_PER_SECOND;
uint32_t tbfreq_procfs;
if (read_cpuinfo("timebase", line, sizeof(line))) {
return tbfreq_fallback;
}
ns = strchr(line, ':');
if (!ns) {
return tbfreq_fallback;
}
tbfreq_procfs = atoi(++ns);
/* 0 is certainly not acceptable by the guest, return fallback value */
return tbfreq_procfs ? tbfreq_procfs : tbfreq_fallback;
}
uint32_t kvmppc_get_tbfreq(void)
{
static uint32_t cached_tbfreq;
if (!cached_tbfreq) {
cached_tbfreq = kvmppc_get_tbfreq_procfs();
}
return cached_tbfreq;
}
bool kvmppc_get_host_serial(char **value)
{
return g_file_get_contents("/proc/device-tree/system-id", value, NULL,
NULL);
}
bool kvmppc_get_host_model(char **value)
{
return g_file_get_contents("/proc/device-tree/model", value, NULL, NULL);
}
/* Try to find a device tree node for a CPU with clock-frequency property */
static int kvmppc_find_cpu_dt(char *buf, int buf_len)
{
struct dirent *dirp;
DIR *dp;
dp = opendir(PROC_DEVTREE_CPU);
if (!dp) {
printf("Can't open directory " PROC_DEVTREE_CPU "\n");
return -1;
}
buf[0] = '\0';
while ((dirp = readdir(dp)) != NULL) {
FILE *f;
/* Don't accidentally read from the current and parent directories */
if (strcmp(dirp->d_name, ".") == 0 || strcmp(dirp->d_name, "..") == 0) {
continue;
}
snprintf(buf, buf_len, "%s%s/clock-frequency", PROC_DEVTREE_CPU,
dirp->d_name);
f = fopen(buf, "r");
if (f) {
snprintf(buf, buf_len, "%s%s", PROC_DEVTREE_CPU, dirp->d_name);
fclose(f);
break;
}
buf[0] = '\0';
}
closedir(dp);
if (buf[0] == '\0') {
printf("Unknown host!\n");
return -1;
}
return 0;
}
static uint64_t kvmppc_read_int_dt(const char *filename)
{
union {
uint32_t v32;
uint64_t v64;
} u;
FILE *f;
int len;
f = fopen(filename, "rb");
if (!f) {
return -1;
}
len = fread(&u, 1, sizeof(u), f);
fclose(f);
switch (len) {
case 4:
/* property is a 32-bit quantity */
return be32_to_cpu(u.v32);
case 8:
return be64_to_cpu(u.v64);
}
return 0;
}
/*
* Read a CPU node property from the host device tree that's a single
* integer (32-bit or 64-bit). Returns 0 if anything goes wrong
* (can't find or open the property, or doesn't understand the format)
*/
static uint64_t kvmppc_read_int_cpu_dt(const char *propname)
{
char buf[PATH_MAX], *tmp;
uint64_t val;
if (kvmppc_find_cpu_dt(buf, sizeof(buf))) {
return -1;
}
tmp = g_strdup_printf("%s/%s", buf, propname);
val = kvmppc_read_int_dt(tmp);
g_free(tmp);
return val;
}
uint64_t kvmppc_get_clockfreq(void)
{
return kvmppc_read_int_cpu_dt("clock-frequency");
}
static int kvmppc_get_dec_bits(void)
{
int nr_bits = kvmppc_read_int_cpu_dt("ibm,dec-bits");
if (nr_bits > 0) {
return nr_bits;
}
return 0;
}
static int kvmppc_get_pvinfo(CPUPPCState *env, struct kvm_ppc_pvinfo *pvinfo)
{
CPUState *cs = env_cpu(env);
if (kvm_vm_check_extension(cs->kvm_state, KVM_CAP_PPC_GET_PVINFO) &&
!kvm_vm_ioctl(cs->kvm_state, KVM_PPC_GET_PVINFO, pvinfo)) {
return 0;
}
return 1;
}
int kvmppc_get_hasidle(CPUPPCState *env)
{
struct kvm_ppc_pvinfo pvinfo;
if (!kvmppc_get_pvinfo(env, &pvinfo) &&
(pvinfo.flags & KVM_PPC_PVINFO_FLAGS_EV_IDLE)) {
return 1;
}
return 0;
}
int kvmppc_get_hypercall(CPUPPCState *env, uint8_t *buf, int buf_len)
{
uint32_t *hc = (uint32_t *)buf;
struct kvm_ppc_pvinfo pvinfo;
if (!kvmppc_get_pvinfo(env, &pvinfo)) {
memcpy(buf, pvinfo.hcall, buf_len);
return 0;
}
/*
* Fallback to always fail hypercalls regardless of endianness:
*
* tdi 0,r0,72 (becomes b .+8 in wrong endian, nop in good endian)
* li r3, -1
* b .+8 (becomes nop in wrong endian)
* bswap32(li r3, -1)
*/
hc[0] = cpu_to_be32(0x08000048);
hc[1] = cpu_to_be32(0x3860ffff);
hc[2] = cpu_to_be32(0x48000008);
hc[3] = cpu_to_be32(bswap32(0x3860ffff));
spapr/target-ppc/kvm: Only add hcall-instructions if KVM supports it ePAPR defines "hcall-instructions" device-tree property which contains code to call hypercalls in ePAPR paravirtualized guests. In general pseries guests won't use this property, instead using the PAPR defined hypercall interface. However, this property has been re-used to implement a hack to allow PR KVM to run (slightly modified) guests in some situations where it otherwise wouldn't be able to (because the system's L0 hypervisor doesn't forward the PAPR hypercalls to the PR KVM kernel). Hence, this property is always present in the device tree for pseries guests. All KVM guests use it at least to read features via the KVM_HC_FEATURES hypercall. The property is populated by the code returned from the KVM's KVM_PPC_GET_PVINFO ioctl; if not implemented in the KVM, QEMU supplies code which will fail all hypercall attempts. If QEMU does not create the property, and the guest kernel is compiled with CONFIG_EPAPR_PARAVIRT (which is normally the case), there is exactly the same stub at @epapr_hypercall_start already. Rather than maintaining this fairly useless stub implementation, it makes more sense not to create the property in the device tree in the first place if the host kernel does not implement it. This changes kvmppc_get_hypercall() to return 1 if the host kernel does not implement KVM_CAP_PPC_GET_PVINFO. The caller can use it to decide on whether to create the property or not. This changes the pseries machine to not create the property if KVM does not implement KVM_PPC_GET_PVINFO. In practice this means that from now on the property will not be created if either HV KVM or TCG is used. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [reworded commit message for clarity --dwg] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-03-21 05:14:02 +03:00
return 1;
}
static inline int kvmppc_enable_hcall(KVMState *s, target_ulong hcall)
{
return kvm_vm_enable_cap(s, KVM_CAP_PPC_ENABLE_HCALL, 0, hcall, 1);
}
void kvmppc_enable_logical_ci_hcalls(void)
{
/*
* FIXME: it would be nice if we could detect the cases where
* we're using a device which requires the in kernel
* implementation of these hcalls, but the kernel lacks them and
* produce a warning.
*/
kvmppc_enable_hcall(kvm_state, H_LOGICAL_CI_LOAD);
kvmppc_enable_hcall(kvm_state, H_LOGICAL_CI_STORE);
}
void kvmppc_enable_set_mode_hcall(void)
{
kvmppc_enable_hcall(kvm_state, H_SET_MODE);
}
void kvmppc_enable_clear_ref_mod_hcalls(void)
{
kvmppc_enable_hcall(kvm_state, H_CLEAR_REF);
kvmppc_enable_hcall(kvm_state, H_CLEAR_MOD);
}
void kvmppc_enable_h_page_init(void)
{
kvmppc_enable_hcall(kvm_state, H_PAGE_INIT);
}
void kvmppc_enable_h_rpt_invalidate(void)
{
kvmppc_enable_hcall(kvm_state, H_RPT_INVALIDATE);
}
void kvmppc_set_papr(PowerPCCPU *cpu)
{
CPUState *cs = CPU(cpu);
int ret;
if (!kvm_enabled()) {
return;
}
ret = kvm_vcpu_enable_cap(cs, KVM_CAP_PPC_PAPR, 0);
if (ret) {
error_report("This vCPU type or KVM version does not support PAPR");
exit(1);
}
/*
* Update the capability flag so we sync the right information
* with kvm
*/
cap_papr = 1;
}
int kvmppc_set_compat(PowerPCCPU *cpu, uint32_t compat_pvr)
{
return kvm_set_one_reg(CPU(cpu), KVM_REG_PPC_ARCH_COMPAT, &compat_pvr);
}
void kvmppc_set_mpic_proxy(PowerPCCPU *cpu, int mpic_proxy)
{
CPUState *cs = CPU(cpu);
int ret;
ret = kvm_vcpu_enable_cap(cs, KVM_CAP_PPC_EPR, 0, mpic_proxy);
if (ret && mpic_proxy) {
error_report("This KVM version does not support EPR");
exit(1);
}
}
bool kvmppc_get_fwnmi(void)
{
return cap_fwnmi;
}
pseries: fix kvmppc_set_fwnmi() QEMU issues the ioctl(KVM_CAP_PPC_FWNMI) on the first vCPU. If the first vCPU is currently running, the vCPU mutex is held and the ioctl() cannot be done and waits until the mutex is released. This never happens and the VM is stuck. To avoid this deadlock, issue the ioctl on the same vCPU doing the RTAS call. The problem can be reproduced by booting a guest with several vCPUs (the probability to have the problem is (n - 1) / n, n = # of CPUs), and then by triggering a kernel crash with "echo c >/proc/sysrq-trigger". On the reboot, the kernel hangs after: ... [ 0.000000] ----------------------------------------------------- [ 0.000000] ppc64_pft_size = 0x0 [ 0.000000] phys_mem_size = 0x48000000 [ 0.000000] dcache_bsize = 0x80 [ 0.000000] icache_bsize = 0x80 [ 0.000000] cpu_features = 0x0001c06f8f4f91a7 [ 0.000000] possible = 0x0003fbffcf5fb1a7 [ 0.000000] always = 0x00000003800081a1 [ 0.000000] cpu_user_features = 0xdc0065c2 0xaee00000 [ 0.000000] mmu_features = 0x3c006041 [ 0.000000] firmware_features = 0x00000085455a445f [ 0.000000] physical_start = 0x8000000 [ 0.000000] ----------------------------------------------------- [ 0.000000] numa: NODE_DATA [mem 0x47f33c80-0x47f3ffff] Fixes: ec010c00665b ("ppc/spapr: KVM FWNMI should not be enabled until guest requests it") Cc: npiggin@gmail.com Signed-off-by: Laurent Vivier <lvivier@redhat.com> Message-Id: <20200724083533.281700-1-lvivier@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-07-24 11:35:33 +03:00
int kvmppc_set_fwnmi(PowerPCCPU *cpu)
{
CPUState *cs = CPU(cpu);
return kvm_vcpu_enable_cap(cs, KVM_CAP_PPC_FWNMI, 0);
}
int kvmppc_smt_threads(void)
{
return cap_ppc_smt ? cap_ppc_smt : 1;
}
int kvmppc_set_smt_threads(int smt)
{
int ret;
ret = kvm_vm_enable_cap(kvm_state, KVM_CAP_PPC_SMT, 0, smt, 0);
if (!ret) {
cap_ppc_smt = smt;
}
return ret;
}
void kvmppc_error_append_smt_possible_hint(Error *const *errp)
{
int i;
GString *g;
char *s;
assert(kvm_enabled());
if (cap_ppc_smt_possible) {
g = g_string_new("Available VSMT modes:");
for (i = 63; i >= 0; i--) {
if ((1UL << i) & cap_ppc_smt_possible) {
g_string_append_printf(g, " %lu", (1UL << i));
}
}
s = g_string_free(g, false);
error_append_hint(errp, "%s.\n", s);
g_free(s);
} else {
error_append_hint(errp,
"This KVM seems to be too old to support VSMT.\n");
}
}
#ifdef TARGET_PPC64
uint64_t kvmppc_vrma_limit(unsigned int hash_shift)
{
struct kvm_ppc_smmu_info info;
long rampagesize, best_page_shift;
int i;
/*
* Find the largest hardware supported page size that's less than
* or equal to the (logical) backing page size of guest RAM
*/
kvm_get_smmu_info(&info, &error_fatal);
rampagesize = qemu_minrampagesize();
best_page_shift = 0;
for (i = 0; i < KVM_PPC_PAGE_SIZES_MAX_SZ; i++) {
struct kvm_ppc_one_seg_page_size *sps = &info.sps[i];
if (!sps->page_shift) {
continue;
}
if ((sps->page_shift > best_page_shift)
&& ((1UL << sps->page_shift) <= rampagesize)) {
best_page_shift = sps->page_shift;
}
}
return 1ULL << (best_page_shift + hash_shift - 7);
}
#endif
bool kvmppc_spapr_use_multitce(void)
{
return cap_spapr_multitce;
}
int kvmppc_spapr_enable_inkernel_multitce(void)
{
int ret;
ret = kvm_vm_enable_cap(kvm_state, KVM_CAP_PPC_ENABLE_HCALL, 0,
H_PUT_TCE_INDIRECT, 1);
if (!ret) {
ret = kvm_vm_enable_cap(kvm_state, KVM_CAP_PPC_ENABLE_HCALL, 0,
H_STUFF_TCE, 1);
}
return ret;
}
void *kvmppc_create_spapr_tce(uint32_t liobn, uint32_t page_shift,
uint64_t bus_offset, uint32_t nb_table,
int *pfd, bool need_vfio)
{
long len;
int fd;
void *table;
/*
* Must set fd to -1 so we don't try to munmap when called for
* destroying the table, which the upper layers -will- do
*/
*pfd = -1;
if (!cap_spapr_tce || (need_vfio && !cap_spapr_vfio)) {
return NULL;
}
if (cap_spapr_tce_64) {
struct kvm_create_spapr_tce_64 args = {
.liobn = liobn,
.page_shift = page_shift,
.offset = bus_offset >> page_shift,
.size = nb_table,
.flags = 0
};
fd = kvm_vm_ioctl(kvm_state, KVM_CREATE_SPAPR_TCE_64, &args);
if (fd < 0) {
fprintf(stderr,
"KVM: Failed to create TCE64 table for liobn 0x%x\n",
liobn);
return NULL;
}
} else if (cap_spapr_tce) {
uint64_t window_size = (uint64_t) nb_table << page_shift;
struct kvm_create_spapr_tce args = {
.liobn = liobn,
.window_size = window_size,
};
if ((window_size != args.window_size) || bus_offset) {
return NULL;
}
fd = kvm_vm_ioctl(kvm_state, KVM_CREATE_SPAPR_TCE, &args);
if (fd < 0) {
fprintf(stderr, "KVM: Failed to create TCE table for liobn 0x%x\n",
liobn);
return NULL;
}
} else {
return NULL;
}
len = nb_table * sizeof(uint64_t);
/* FIXME: round this up to page size */
table = mmap(NULL, len, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0);
if (table == MAP_FAILED) {
fprintf(stderr, "KVM: Failed to map TCE table for liobn 0x%x\n",
liobn);
close(fd);
return NULL;
}
*pfd = fd;
return table;
}
int kvmppc_remove_spapr_tce(void *table, int fd, uint32_t nb_table)
{
long len;
if (fd < 0) {
return -1;
}
len = nb_table * sizeof(uint64_t);
if ((munmap(table, len) < 0) ||
(close(fd) < 0)) {
fprintf(stderr, "KVM: Unexpected error removing TCE table: %s",
strerror(errno));
/* Leak the table */
}
return 0;
}
int kvmppc_reset_htab(int shift_hint)
{
uint32_t shift = shift_hint;
if (!kvm_enabled()) {
/* Full emulation, tell caller to allocate htab itself */
return 0;
}
if (kvm_vm_check_extension(kvm_state, KVM_CAP_PPC_ALLOC_HTAB)) {
int ret;
ret = kvm_vm_ioctl(kvm_state, KVM_PPC_ALLOCATE_HTAB, &shift);
if (ret == -ENOTTY) {
/*
* At least some versions of PR KVM advertise the
* capability, but don't implement the ioctl(). Oops.
* Return 0 so that we allocate the htab in qemu, as is
* correct for PR.
*/
return 0;
} else if (ret < 0) {
return ret;
}
return shift;
}
/*
* We have a kernel that predates the htab reset calls. For PR
* KVM, we need to allocate the htab ourselves, for an HV KVM of
* this era, it has allocated a 16MB fixed size hash table
* already.
*/
if (kvmppc_is_pr(kvm_state)) {
/* PR - tell caller to allocate htab */
return 0;
} else {
/* HV - assume 16MB kernel allocated htab */
return 24;
}
}
static inline uint32_t mfpvr(void)
{
uint32_t pvr;
asm ("mfpvr %0"
: "=r"(pvr));
return pvr;
}
static void alter_insns(uint64_t *word, uint64_t flags, bool on)
{
if (on) {
*word |= flags;
} else {
*word &= ~flags;
}
}
static void kvmppc_host_cpu_class_init(ObjectClass *oc, void *data)
{
PowerPCCPUClass *pcc = POWERPC_CPU_CLASS(oc);
uint32_t dcache_size = kvmppc_read_int_cpu_dt("d-cache-size");
uint32_t icache_size = kvmppc_read_int_cpu_dt("i-cache-size");
/* Now fix up the class with information we can query from the host */
pcc->pvr = mfpvr();
alter_insns(&pcc->insns_flags, PPC_ALTIVEC,
qemu_getauxval(AT_HWCAP) & PPC_FEATURE_HAS_ALTIVEC);
alter_insns(&pcc->insns_flags2, PPC2_VSX,
qemu_getauxval(AT_HWCAP) & PPC_FEATURE_HAS_VSX);
alter_insns(&pcc->insns_flags2, PPC2_DFP,
qemu_getauxval(AT_HWCAP) & PPC_FEATURE_HAS_DFP);
if (dcache_size != -1) {
pcc->l1_dcache_size = dcache_size;
}
if (icache_size != -1) {
pcc->l1_icache_size = icache_size;
}
#if defined(TARGET_PPC64)
pcc->radix_page_info = kvmppc_get_radix_page_info();
#endif /* defined(TARGET_PPC64) */
}
bool kvmppc_has_cap_epr(void)
{
return cap_epr;
}
bool kvmppc_has_cap_fixup_hcalls(void)
{
return cap_fixup_hcalls;
}
bool kvmppc_has_cap_htm(void)
{
return cap_htm;
}
bool kvmppc_has_cap_mmu_radix(void)
{
return cap_mmu_radix;
}
bool kvmppc_has_cap_mmu_hash_v3(void)
{
return cap_mmu_hash_v3;
}
static bool kvmppc_power8_host(void)
{
bool ret = false;
#ifdef TARGET_PPC64
{
uint32_t base_pvr = CPU_POWERPC_POWER_SERVER_MASK & mfpvr();
ret = (base_pvr == CPU_POWERPC_POWER8E_BASE) ||
(base_pvr == CPU_POWERPC_POWER8NVL_BASE) ||
(base_pvr == CPU_POWERPC_POWER8_BASE);
}
#endif /* TARGET_PPC64 */
return ret;
}
static int parse_cap_ppc_safe_cache(struct kvm_ppc_cpu_char c)
{
bool l1d_thread_priv_req = !kvmppc_power8_host();
if (~c.behaviour & c.behaviour_mask & H_CPU_BEHAV_L1D_FLUSH_PR) {
return 2;
} else if ((!l1d_thread_priv_req ||
c.character & c.character_mask & H_CPU_CHAR_L1D_THREAD_PRIV) &&
(c.character & c.character_mask
& (H_CPU_CHAR_L1D_FLUSH_ORI30 | H_CPU_CHAR_L1D_FLUSH_TRIG2))) {
return 1;
}
return 0;
}
static int parse_cap_ppc_safe_bounds_check(struct kvm_ppc_cpu_char c)
{
if (~c.behaviour & c.behaviour_mask & H_CPU_BEHAV_BNDS_CHK_SPEC_BAR) {
return 2;
} else if (c.character & c.character_mask & H_CPU_CHAR_SPEC_BAR_ORI31) {
return 1;
}
return 0;
}
static int parse_cap_ppc_safe_indirect_branch(struct kvm_ppc_cpu_char c)
{
if ((~c.behaviour & c.behaviour_mask & H_CPU_BEHAV_FLUSH_COUNT_CACHE) &&
(~c.character & c.character_mask & H_CPU_CHAR_CACHE_COUNT_DIS) &&
(~c.character & c.character_mask & H_CPU_CHAR_BCCTRL_SERIALISED)) {
return SPAPR_CAP_FIXED_NA;
} else if (c.behaviour & c.behaviour_mask & H_CPU_BEHAV_FLUSH_COUNT_CACHE) {
return SPAPR_CAP_WORKAROUND;
} else if (c.character & c.character_mask & H_CPU_CHAR_CACHE_COUNT_DIS) {
return SPAPR_CAP_FIXED_CCD;
} else if (c.character & c.character_mask & H_CPU_CHAR_BCCTRL_SERIALISED) {
return SPAPR_CAP_FIXED_IBS;
}
return 0;
}
static int parse_cap_ppc_count_cache_flush_assist(struct kvm_ppc_cpu_char c)
{
if (c.character & c.character_mask & H_CPU_CHAR_BCCTR_FLUSH_ASSIST) {
return 1;
}
return 0;
}
bool kvmppc_has_cap_xive(void)
{
return cap_xive;
}
static void kvmppc_get_cpu_characteristics(KVMState *s)
{
struct kvm_ppc_cpu_char c;
int ret;
/* Assume broken */
cap_ppc_safe_cache = 0;
cap_ppc_safe_bounds_check = 0;
cap_ppc_safe_indirect_branch = 0;
ret = kvm_vm_check_extension(s, KVM_CAP_PPC_GET_CPU_CHAR);
if (!ret) {
return;
}
ret = kvm_vm_ioctl(s, KVM_PPC_GET_CPU_CHAR, &c);
if (ret < 0) {
return;
}
cap_ppc_safe_cache = parse_cap_ppc_safe_cache(c);
cap_ppc_safe_bounds_check = parse_cap_ppc_safe_bounds_check(c);
cap_ppc_safe_indirect_branch = parse_cap_ppc_safe_indirect_branch(c);
cap_ppc_count_cache_flush_assist =
parse_cap_ppc_count_cache_flush_assist(c);
}
int kvmppc_get_cap_safe_cache(void)
{
return cap_ppc_safe_cache;
}
int kvmppc_get_cap_safe_bounds_check(void)
{
return cap_ppc_safe_bounds_check;
}
int kvmppc_get_cap_safe_indirect_branch(void)
{
return cap_ppc_safe_indirect_branch;
}
int kvmppc_get_cap_count_cache_flush_assist(void)
{
return cap_ppc_count_cache_flush_assist;
}
bool kvmppc_has_cap_nested_kvm_hv(void)
{
return !!cap_ppc_nested_kvm_hv;
}
int kvmppc_set_cap_nested_kvm_hv(int enable)
{
return kvm_vm_enable_cap(kvm_state, KVM_CAP_PPC_NESTED_HV, 0, enable);
}
bool kvmppc_has_cap_spapr_vfio(void)
{
return cap_spapr_vfio;
}
int kvmppc_get_cap_large_decr(void)
{
return cap_large_decr;
}
int kvmppc_enable_cap_large_decr(PowerPCCPU *cpu, int enable)
{
CPUState *cs = CPU(cpu);
uint64_t lpcr = 0;
kvm_get_one_reg(cs, KVM_REG_PPC_LPCR_64, &lpcr);
/* Do we need to modify the LPCR? */
if (!!(lpcr & LPCR_LD) != !!enable) {
if (enable) {
lpcr |= LPCR_LD;
} else {
lpcr &= ~LPCR_LD;
}
kvm_set_one_reg(cs, KVM_REG_PPC_LPCR_64, &lpcr);
kvm_get_one_reg(cs, KVM_REG_PPC_LPCR_64, &lpcr);
if (!!(lpcr & LPCR_LD) != !!enable) {
return -1;
}
}
return 0;
}
int kvmppc_has_cap_rpt_invalidate(void)
{
return cap_rpt_invalidate;
}
spapr: Add SPAPR_CAP_AIL_MODE_3 for AIL mode 3 support for H_SET_MODE hcall The behaviour of the Address Translation Mode on Interrupt resource is not consistently supported by all CPU versions or all KVM versions: KVM HV does not support mode 2, and does not support mode 3 on POWER7 or early POWER9 processesors. KVM PR only supports mode 0. TCG supports all modes (0, 2, 3) on CPUs with support for the corresonding LPCR[AIL] mode. This leads to inconsistencies in guest behaviour and could cause problems migrating guests. This was not noticable for Linux guests for a long time because the kernel only uses modes 0 and 3, and it used to consider AIL-3 to be advisory in that it would always keep the AIL-0 vectors around, so it did not matter whether or not interrupts were delivered according to the AIL mode. Recent Linux guests depend on AIL mode 3 working as specified in order to support the SCV facility interrupt. If AIL-3 can not be provided, then H_SET_MODE must return an error to Linux so it can disable the SCV facility (failure to do so can lead to userspace being able to crash the guest kernel). Add the ail-mode-3 capability to specify that AIL-3 is supported. AIL-0 is implied as the baseline, and AIL-2 is no longer supported by spapr. AIL-2 is not known to be used by any software, but support in TCG could be restored with an ail-mode-2 capability quite easily if a regression is reported. Modify the H_SET_MODE Address Translation Mode on Interrupt resource handler to check capabilities and correctly return error if not supported. KVM has a cap to advertise support for AIL-3. Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Message-Id: <20230515160216.394612-1-npiggin@gmail.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2023-05-15 19:02:16 +03:00
bool kvmppc_supports_ail_3(void)
{
return cap_ail_mode_3;
}
PowerPCCPUClass *kvm_ppc_get_host_cpu_class(void)
{
uint32_t host_pvr = mfpvr();
PowerPCCPUClass *pvr_pcc;
pvr_pcc = ppc_cpu_class_by_pvr(host_pvr);
if (pvr_pcc == NULL) {
pvr_pcc = ppc_cpu_class_by_pvr_mask(host_pvr);
}
return pvr_pcc;
}
static void pseries_machine_class_fixup(ObjectClass *oc, void *opaque)
{
MachineClass *mc = MACHINE_CLASS(oc);
mc->default_cpu_type = TYPE_HOST_POWERPC_CPU;
}
static int kvm_ppc_register_host_cpu_type(void)
{
TypeInfo type_info = {
.name = TYPE_HOST_POWERPC_CPU,
.class_init = kvmppc_host_cpu_class_init,
};
PowerPCCPUClass *pvr_pcc;
ObjectClass *oc;
DeviceClass *dc;
int i;
pvr_pcc = kvm_ppc_get_host_cpu_class();
if (pvr_pcc == NULL) {
return -1;
}
type_info.parent = object_class_get_name(OBJECT_CLASS(pvr_pcc));
type_register(&type_info);
/* override TCG default cpu type with 'host' cpu model */
object_class_foreach(pseries_machine_class_fixup, TYPE_SPAPR_MACHINE,
false, NULL);
oc = object_class_by_name(type_info.name);
g_assert(oc);
/*
* Update generic CPU family class alias (e.g. on a POWER8NVL host,
* we want "POWER8" to be a "family" alias that points to the current
* host CPU type, too)
*/
dc = DEVICE_CLASS(ppc_cpu_get_family_class(pvr_pcc));
for (i = 0; ppc_cpu_aliases[i].alias != NULL; i++) {
if (strcasecmp(ppc_cpu_aliases[i].alias, dc->desc) == 0) {
char *suffix;
ppc_cpu_aliases[i].model = g_strdup(object_class_get_name(oc));
suffix = strstr(ppc_cpu_aliases[i].model, POWERPC_CPU_TYPE_SUFFIX);
if (suffix) {
*suffix = 0;
}
break;
}
}
return 0;
}
int kvmppc_define_rtas_kernel_token(uint32_t token, const char *function)
{
struct kvm_rtas_token_args args = {
.token = token,
};
if (!kvm_check_extension(kvm_state, KVM_CAP_PPC_RTAS)) {
return -ENOENT;
}
strncpy(args.name, function, sizeof(args.name) - 1);
return kvm_vm_ioctl(kvm_state, KVM_PPC_RTAS_DEFINE_TOKEN, &args);
}
int kvmppc_get_htab_fd(bool write, uint64_t index, Error **errp)
{
struct kvm_get_htab_fd s = {
.flags = write ? KVM_GET_HTAB_WRITE : 0,
.start_index = index,
};
int ret;
if (!cap_htab_fd) {
error_setg(errp, "KVM version doesn't support %s the HPT",
write ? "writing" : "reading");
return -ENOTSUP;
}
ret = kvm_vm_ioctl(kvm_state, KVM_PPC_GET_HTAB_FD, &s);
if (ret < 0) {
error_setg(errp, "Unable to open fd for %s HPT %s KVM: %s",
write ? "writing" : "reading", write ? "to" : "from",
strerror(errno));
return -errno;
}
return ret;
}
int kvmppc_save_htab(QEMUFile *f, int fd, size_t bufsize, int64_t max_ns)
{
int64_t starttime = qemu_clock_get_ns(QEMU_CLOCK_REALTIME);
g_autofree uint8_t *buf = g_malloc(bufsize);
ssize_t rc;
do {
rc = read(fd, buf, bufsize);
if (rc < 0) {
fprintf(stderr, "Error reading data from KVM HTAB fd: %s\n",
strerror(errno));
return rc;
} else if (rc) {
uint8_t *buffer = buf;
ssize_t n = rc;
while (n) {
struct kvm_get_htab_header *head =
(struct kvm_get_htab_header *) buffer;
size_t chunksize = sizeof(*head) +
HASH_PTE_SIZE_64 * head->n_valid;
qemu_put_be32(f, head->index);
qemu_put_be16(f, head->n_valid);
qemu_put_be16(f, head->n_invalid);
qemu_put_buffer(f, (void *)(head + 1),
HASH_PTE_SIZE_64 * head->n_valid);
buffer += chunksize;
n -= chunksize;
}
}
} while ((rc != 0)
&& ((max_ns < 0) ||
((qemu_clock_get_ns(QEMU_CLOCK_REALTIME) - starttime) < max_ns)));
return (rc == 0) ? 1 : 0;
}
int kvmppc_load_htab_chunk(QEMUFile *f, int fd, uint32_t index,
uint16_t n_valid, uint16_t n_invalid, Error **errp)
{
struct kvm_get_htab_header *buf;
size_t chunksize = sizeof(*buf) + n_valid * HASH_PTE_SIZE_64;
ssize_t rc;
buf = alloca(chunksize);
buf->index = index;
buf->n_valid = n_valid;
buf->n_invalid = n_invalid;
qemu_get_buffer(f, (void *)(buf + 1), HASH_PTE_SIZE_64 * n_valid);
rc = write(fd, buf, chunksize);
if (rc < 0) {
error_setg_errno(errp, errno, "Error writing the KVM hash table");
return -errno;
}
if (rc != chunksize) {
/* We should never get a short write on a single chunk */
error_setg(errp, "Short write while restoring the KVM hash table");
return -ENOSPC;
}
return 0;
}
bool kvm_arch_stop_on_emulation_error(CPUState *cpu)
{
return true;
}
void kvm_arch_init_irq_routing(KVMState *s)
{
}
target/ppc: Fix KVM-HV HPTE accessors When a 'pseries' guest is running with KVM-HV, the guest's hashed page table (HPT) is stored within the host kernel, so it is not directly accessible to qemu. Most of the time, qemu doesn't need to access it: we're using the hardware MMU, and KVM itself implements the guest hypercalls for manipulating the HPT. However, qemu does need access to the in-KVM HPT to implement get_phys_page_debug() for the benefit of the gdbstub, and maybe for other debug operations. To allow this, 7c43bca "target-ppc: Fix page table lookup with kvm enabled" added kvmppc_hash64_read_pteg() to target/ppc/kvm.c to read in a batch of HPTEs from the KVM table. Unfortunately, there are a couple of problems with this: First, the name of the function implies it always reads a whole PTEG from the HPT, but in fact in some cases it's used to grab individual HPTEs (which ends up pulling 8 HPTEs, not aligned to a PTEG from the kernel). Second, and more importantly, the code to read the HPTEs from KVM is simply wrong, in general. The data from the fd that KVM provides is designed mostly for compact migration rather than this sort of one-off access, and so needs some decoding for this purpose. The current code will work in some cases, but if there are invalid HPTEs then it will not get sane results. This patch rewrite the HPTE reading function to have a simpler interface (just read n HPTEs into a caller provided buffer), and to correctly decode the stream from the kernel. For consistency we also clean up the similar function for altering HPTEs within KVM (introduced in c138593 "target-ppc: Update ppc_hash64_store_hpte to support updating in-kernel htab"). Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-02-27 07:34:19 +03:00
void kvmppc_read_hptes(ppc_hash_pte64_t *hptes, hwaddr ptex, int n)
{
target/ppc: Fix KVM-HV HPTE accessors When a 'pseries' guest is running with KVM-HV, the guest's hashed page table (HPT) is stored within the host kernel, so it is not directly accessible to qemu. Most of the time, qemu doesn't need to access it: we're using the hardware MMU, and KVM itself implements the guest hypercalls for manipulating the HPT. However, qemu does need access to the in-KVM HPT to implement get_phys_page_debug() for the benefit of the gdbstub, and maybe for other debug operations. To allow this, 7c43bca "target-ppc: Fix page table lookup with kvm enabled" added kvmppc_hash64_read_pteg() to target/ppc/kvm.c to read in a batch of HPTEs from the KVM table. Unfortunately, there are a couple of problems with this: First, the name of the function implies it always reads a whole PTEG from the HPT, but in fact in some cases it's used to grab individual HPTEs (which ends up pulling 8 HPTEs, not aligned to a PTEG from the kernel). Second, and more importantly, the code to read the HPTEs from KVM is simply wrong, in general. The data from the fd that KVM provides is designed mostly for compact migration rather than this sort of one-off access, and so needs some decoding for this purpose. The current code will work in some cases, but if there are invalid HPTEs then it will not get sane results. This patch rewrite the HPTE reading function to have a simpler interface (just read n HPTEs into a caller provided buffer), and to correctly decode the stream from the kernel. For consistency we also clean up the similar function for altering HPTEs within KVM (introduced in c138593 "target-ppc: Update ppc_hash64_store_hpte to support updating in-kernel htab"). Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-02-27 07:34:19 +03:00
int fd, rc;
int i;
fd = kvmppc_get_htab_fd(false, ptex, &error_abort);
target/ppc: Fix KVM-HV HPTE accessors When a 'pseries' guest is running with KVM-HV, the guest's hashed page table (HPT) is stored within the host kernel, so it is not directly accessible to qemu. Most of the time, qemu doesn't need to access it: we're using the hardware MMU, and KVM itself implements the guest hypercalls for manipulating the HPT. However, qemu does need access to the in-KVM HPT to implement get_phys_page_debug() for the benefit of the gdbstub, and maybe for other debug operations. To allow this, 7c43bca "target-ppc: Fix page table lookup with kvm enabled" added kvmppc_hash64_read_pteg() to target/ppc/kvm.c to read in a batch of HPTEs from the KVM table. Unfortunately, there are a couple of problems with this: First, the name of the function implies it always reads a whole PTEG from the HPT, but in fact in some cases it's used to grab individual HPTEs (which ends up pulling 8 HPTEs, not aligned to a PTEG from the kernel). Second, and more importantly, the code to read the HPTEs from KVM is simply wrong, in general. The data from the fd that KVM provides is designed mostly for compact migration rather than this sort of one-off access, and so needs some decoding for this purpose. The current code will work in some cases, but if there are invalid HPTEs then it will not get sane results. This patch rewrite the HPTE reading function to have a simpler interface (just read n HPTEs into a caller provided buffer), and to correctly decode the stream from the kernel. For consistency we also clean up the similar function for altering HPTEs within KVM (introduced in c138593 "target-ppc: Update ppc_hash64_store_hpte to support updating in-kernel htab"). Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-02-27 07:34:19 +03:00
i = 0;
while (i < n) {
struct kvm_get_htab_header *hdr;
int m = n < HPTES_PER_GROUP ? n : HPTES_PER_GROUP;
char buf[sizeof(*hdr) + HPTES_PER_GROUP * HASH_PTE_SIZE_64];
rc = read(fd, buf, sizeof(*hdr) + m * HASH_PTE_SIZE_64);
target/ppc: Fix KVM-HV HPTE accessors When a 'pseries' guest is running with KVM-HV, the guest's hashed page table (HPT) is stored within the host kernel, so it is not directly accessible to qemu. Most of the time, qemu doesn't need to access it: we're using the hardware MMU, and KVM itself implements the guest hypercalls for manipulating the HPT. However, qemu does need access to the in-KVM HPT to implement get_phys_page_debug() for the benefit of the gdbstub, and maybe for other debug operations. To allow this, 7c43bca "target-ppc: Fix page table lookup with kvm enabled" added kvmppc_hash64_read_pteg() to target/ppc/kvm.c to read in a batch of HPTEs from the KVM table. Unfortunately, there are a couple of problems with this: First, the name of the function implies it always reads a whole PTEG from the HPT, but in fact in some cases it's used to grab individual HPTEs (which ends up pulling 8 HPTEs, not aligned to a PTEG from the kernel). Second, and more importantly, the code to read the HPTEs from KVM is simply wrong, in general. The data from the fd that KVM provides is designed mostly for compact migration rather than this sort of one-off access, and so needs some decoding for this purpose. The current code will work in some cases, but if there are invalid HPTEs then it will not get sane results. This patch rewrite the HPTE reading function to have a simpler interface (just read n HPTEs into a caller provided buffer), and to correctly decode the stream from the kernel. For consistency we also clean up the similar function for altering HPTEs within KVM (introduced in c138593 "target-ppc: Update ppc_hash64_store_hpte to support updating in-kernel htab"). Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-02-27 07:34:19 +03:00
if (rc < 0) {
hw_error("kvmppc_read_hptes: Unable to read HPTEs");
}
target/ppc: Fix KVM-HV HPTE accessors When a 'pseries' guest is running with KVM-HV, the guest's hashed page table (HPT) is stored within the host kernel, so it is not directly accessible to qemu. Most of the time, qemu doesn't need to access it: we're using the hardware MMU, and KVM itself implements the guest hypercalls for manipulating the HPT. However, qemu does need access to the in-KVM HPT to implement get_phys_page_debug() for the benefit of the gdbstub, and maybe for other debug operations. To allow this, 7c43bca "target-ppc: Fix page table lookup with kvm enabled" added kvmppc_hash64_read_pteg() to target/ppc/kvm.c to read in a batch of HPTEs from the KVM table. Unfortunately, there are a couple of problems with this: First, the name of the function implies it always reads a whole PTEG from the HPT, but in fact in some cases it's used to grab individual HPTEs (which ends up pulling 8 HPTEs, not aligned to a PTEG from the kernel). Second, and more importantly, the code to read the HPTEs from KVM is simply wrong, in general. The data from the fd that KVM provides is designed mostly for compact migration rather than this sort of one-off access, and so needs some decoding for this purpose. The current code will work in some cases, but if there are invalid HPTEs then it will not get sane results. This patch rewrite the HPTE reading function to have a simpler interface (just read n HPTEs into a caller provided buffer), and to correctly decode the stream from the kernel. For consistency we also clean up the similar function for altering HPTEs within KVM (introduced in c138593 "target-ppc: Update ppc_hash64_store_hpte to support updating in-kernel htab"). Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-02-27 07:34:19 +03:00
hdr = (struct kvm_get_htab_header *)buf;
while ((i < n) && ((char *)hdr < (buf + rc))) {
int invalid = hdr->n_invalid, valid = hdr->n_valid;
target/ppc: Fix KVM-HV HPTE accessors When a 'pseries' guest is running with KVM-HV, the guest's hashed page table (HPT) is stored within the host kernel, so it is not directly accessible to qemu. Most of the time, qemu doesn't need to access it: we're using the hardware MMU, and KVM itself implements the guest hypercalls for manipulating the HPT. However, qemu does need access to the in-KVM HPT to implement get_phys_page_debug() for the benefit of the gdbstub, and maybe for other debug operations. To allow this, 7c43bca "target-ppc: Fix page table lookup with kvm enabled" added kvmppc_hash64_read_pteg() to target/ppc/kvm.c to read in a batch of HPTEs from the KVM table. Unfortunately, there are a couple of problems with this: First, the name of the function implies it always reads a whole PTEG from the HPT, but in fact in some cases it's used to grab individual HPTEs (which ends up pulling 8 HPTEs, not aligned to a PTEG from the kernel). Second, and more importantly, the code to read the HPTEs from KVM is simply wrong, in general. The data from the fd that KVM provides is designed mostly for compact migration rather than this sort of one-off access, and so needs some decoding for this purpose. The current code will work in some cases, but if there are invalid HPTEs then it will not get sane results. This patch rewrite the HPTE reading function to have a simpler interface (just read n HPTEs into a caller provided buffer), and to correctly decode the stream from the kernel. For consistency we also clean up the similar function for altering HPTEs within KVM (introduced in c138593 "target-ppc: Update ppc_hash64_store_hpte to support updating in-kernel htab"). Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-02-27 07:34:19 +03:00
if (hdr->index != (ptex + i)) {
hw_error("kvmppc_read_hptes: Unexpected HPTE index %"PRIu32
" != (%"HWADDR_PRIu" + %d", hdr->index, ptex, i);
}
if (n - i < valid) {
valid = n - i;
}
memcpy(hptes + i, hdr + 1, HASH_PTE_SIZE_64 * valid);
i += valid;
target/ppc: Fix KVM-HV HPTE accessors When a 'pseries' guest is running with KVM-HV, the guest's hashed page table (HPT) is stored within the host kernel, so it is not directly accessible to qemu. Most of the time, qemu doesn't need to access it: we're using the hardware MMU, and KVM itself implements the guest hypercalls for manipulating the HPT. However, qemu does need access to the in-KVM HPT to implement get_phys_page_debug() for the benefit of the gdbstub, and maybe for other debug operations. To allow this, 7c43bca "target-ppc: Fix page table lookup with kvm enabled" added kvmppc_hash64_read_pteg() to target/ppc/kvm.c to read in a batch of HPTEs from the KVM table. Unfortunately, there are a couple of problems with this: First, the name of the function implies it always reads a whole PTEG from the HPT, but in fact in some cases it's used to grab individual HPTEs (which ends up pulling 8 HPTEs, not aligned to a PTEG from the kernel). Second, and more importantly, the code to read the HPTEs from KVM is simply wrong, in general. The data from the fd that KVM provides is designed mostly for compact migration rather than this sort of one-off access, and so needs some decoding for this purpose. The current code will work in some cases, but if there are invalid HPTEs then it will not get sane results. This patch rewrite the HPTE reading function to have a simpler interface (just read n HPTEs into a caller provided buffer), and to correctly decode the stream from the kernel. For consistency we also clean up the similar function for altering HPTEs within KVM (introduced in c138593 "target-ppc: Update ppc_hash64_store_hpte to support updating in-kernel htab"). Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-02-27 07:34:19 +03:00
if ((n - i) < invalid) {
invalid = n - i;
}
memset(hptes + i, 0, invalid * HASH_PTE_SIZE_64);
i += invalid;
target/ppc: Fix KVM-HV HPTE accessors When a 'pseries' guest is running with KVM-HV, the guest's hashed page table (HPT) is stored within the host kernel, so it is not directly accessible to qemu. Most of the time, qemu doesn't need to access it: we're using the hardware MMU, and KVM itself implements the guest hypercalls for manipulating the HPT. However, qemu does need access to the in-KVM HPT to implement get_phys_page_debug() for the benefit of the gdbstub, and maybe for other debug operations. To allow this, 7c43bca "target-ppc: Fix page table lookup with kvm enabled" added kvmppc_hash64_read_pteg() to target/ppc/kvm.c to read in a batch of HPTEs from the KVM table. Unfortunately, there are a couple of problems with this: First, the name of the function implies it always reads a whole PTEG from the HPT, but in fact in some cases it's used to grab individual HPTEs (which ends up pulling 8 HPTEs, not aligned to a PTEG from the kernel). Second, and more importantly, the code to read the HPTEs from KVM is simply wrong, in general. The data from the fd that KVM provides is designed mostly for compact migration rather than this sort of one-off access, and so needs some decoding for this purpose. The current code will work in some cases, but if there are invalid HPTEs then it will not get sane results. This patch rewrite the HPTE reading function to have a simpler interface (just read n HPTEs into a caller provided buffer), and to correctly decode the stream from the kernel. For consistency we also clean up the similar function for altering HPTEs within KVM (introduced in c138593 "target-ppc: Update ppc_hash64_store_hpte to support updating in-kernel htab"). Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-02-27 07:34:19 +03:00
hdr = (struct kvm_get_htab_header *)
((char *)(hdr + 1) + HASH_PTE_SIZE_64 * hdr->n_valid);
}
}
close(fd);
}
target/ppc: Fix KVM-HV HPTE accessors When a 'pseries' guest is running with KVM-HV, the guest's hashed page table (HPT) is stored within the host kernel, so it is not directly accessible to qemu. Most of the time, qemu doesn't need to access it: we're using the hardware MMU, and KVM itself implements the guest hypercalls for manipulating the HPT. However, qemu does need access to the in-KVM HPT to implement get_phys_page_debug() for the benefit of the gdbstub, and maybe for other debug operations. To allow this, 7c43bca "target-ppc: Fix page table lookup with kvm enabled" added kvmppc_hash64_read_pteg() to target/ppc/kvm.c to read in a batch of HPTEs from the KVM table. Unfortunately, there are a couple of problems with this: First, the name of the function implies it always reads a whole PTEG from the HPT, but in fact in some cases it's used to grab individual HPTEs (which ends up pulling 8 HPTEs, not aligned to a PTEG from the kernel). Second, and more importantly, the code to read the HPTEs from KVM is simply wrong, in general. The data from the fd that KVM provides is designed mostly for compact migration rather than this sort of one-off access, and so needs some decoding for this purpose. The current code will work in some cases, but if there are invalid HPTEs then it will not get sane results. This patch rewrite the HPTE reading function to have a simpler interface (just read n HPTEs into a caller provided buffer), and to correctly decode the stream from the kernel. For consistency we also clean up the similar function for altering HPTEs within KVM (introduced in c138593 "target-ppc: Update ppc_hash64_store_hpte to support updating in-kernel htab"). Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-02-27 07:34:19 +03:00
void kvmppc_write_hpte(hwaddr ptex, uint64_t pte0, uint64_t pte1)
{
target/ppc: Fix KVM-HV HPTE accessors When a 'pseries' guest is running with KVM-HV, the guest's hashed page table (HPT) is stored within the host kernel, so it is not directly accessible to qemu. Most of the time, qemu doesn't need to access it: we're using the hardware MMU, and KVM itself implements the guest hypercalls for manipulating the HPT. However, qemu does need access to the in-KVM HPT to implement get_phys_page_debug() for the benefit of the gdbstub, and maybe for other debug operations. To allow this, 7c43bca "target-ppc: Fix page table lookup with kvm enabled" added kvmppc_hash64_read_pteg() to target/ppc/kvm.c to read in a batch of HPTEs from the KVM table. Unfortunately, there are a couple of problems with this: First, the name of the function implies it always reads a whole PTEG from the HPT, but in fact in some cases it's used to grab individual HPTEs (which ends up pulling 8 HPTEs, not aligned to a PTEG from the kernel). Second, and more importantly, the code to read the HPTEs from KVM is simply wrong, in general. The data from the fd that KVM provides is designed mostly for compact migration rather than this sort of one-off access, and so needs some decoding for this purpose. The current code will work in some cases, but if there are invalid HPTEs then it will not get sane results. This patch rewrite the HPTE reading function to have a simpler interface (just read n HPTEs into a caller provided buffer), and to correctly decode the stream from the kernel. For consistency we also clean up the similar function for altering HPTEs within KVM (introduced in c138593 "target-ppc: Update ppc_hash64_store_hpte to support updating in-kernel htab"). Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-02-27 07:34:19 +03:00
int fd, rc;
struct {
struct kvm_get_htab_header hdr;
uint64_t pte0;
uint64_t pte1;
} buf;
fd = kvmppc_get_htab_fd(true, 0 /* Ignored */, &error_abort);
target/ppc: Fix KVM-HV HPTE accessors When a 'pseries' guest is running with KVM-HV, the guest's hashed page table (HPT) is stored within the host kernel, so it is not directly accessible to qemu. Most of the time, qemu doesn't need to access it: we're using the hardware MMU, and KVM itself implements the guest hypercalls for manipulating the HPT. However, qemu does need access to the in-KVM HPT to implement get_phys_page_debug() for the benefit of the gdbstub, and maybe for other debug operations. To allow this, 7c43bca "target-ppc: Fix page table lookup with kvm enabled" added kvmppc_hash64_read_pteg() to target/ppc/kvm.c to read in a batch of HPTEs from the KVM table. Unfortunately, there are a couple of problems with this: First, the name of the function implies it always reads a whole PTEG from the HPT, but in fact in some cases it's used to grab individual HPTEs (which ends up pulling 8 HPTEs, not aligned to a PTEG from the kernel). Second, and more importantly, the code to read the HPTEs from KVM is simply wrong, in general. The data from the fd that KVM provides is designed mostly for compact migration rather than this sort of one-off access, and so needs some decoding for this purpose. The current code will work in some cases, but if there are invalid HPTEs then it will not get sane results. This patch rewrite the HPTE reading function to have a simpler interface (just read n HPTEs into a caller provided buffer), and to correctly decode the stream from the kernel. For consistency we also clean up the similar function for altering HPTEs within KVM (introduced in c138593 "target-ppc: Update ppc_hash64_store_hpte to support updating in-kernel htab"). Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-02-27 07:34:19 +03:00
buf.hdr.n_valid = 1;
buf.hdr.n_invalid = 0;
buf.hdr.index = ptex;
buf.pte0 = cpu_to_be64(pte0);
buf.pte1 = cpu_to_be64(pte1);
target/ppc: Fix KVM-HV HPTE accessors When a 'pseries' guest is running with KVM-HV, the guest's hashed page table (HPT) is stored within the host kernel, so it is not directly accessible to qemu. Most of the time, qemu doesn't need to access it: we're using the hardware MMU, and KVM itself implements the guest hypercalls for manipulating the HPT. However, qemu does need access to the in-KVM HPT to implement get_phys_page_debug() for the benefit of the gdbstub, and maybe for other debug operations. To allow this, 7c43bca "target-ppc: Fix page table lookup with kvm enabled" added kvmppc_hash64_read_pteg() to target/ppc/kvm.c to read in a batch of HPTEs from the KVM table. Unfortunately, there are a couple of problems with this: First, the name of the function implies it always reads a whole PTEG from the HPT, but in fact in some cases it's used to grab individual HPTEs (which ends up pulling 8 HPTEs, not aligned to a PTEG from the kernel). Second, and more importantly, the code to read the HPTEs from KVM is simply wrong, in general. The data from the fd that KVM provides is designed mostly for compact migration rather than this sort of one-off access, and so needs some decoding for this purpose. The current code will work in some cases, but if there are invalid HPTEs then it will not get sane results. This patch rewrite the HPTE reading function to have a simpler interface (just read n HPTEs into a caller provided buffer), and to correctly decode the stream from the kernel. For consistency we also clean up the similar function for altering HPTEs within KVM (introduced in c138593 "target-ppc: Update ppc_hash64_store_hpte to support updating in-kernel htab"). Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-02-27 07:34:19 +03:00
rc = write(fd, &buf, sizeof(buf));
if (rc != sizeof(buf)) {
hw_error("kvmppc_write_hpte: Unable to update KVM HPT");
}
close(fd);
}
int kvm_arch_fixup_msi_route(struct kvm_irq_routing_entry *route,
uint64_t address, uint32_t data, PCIDevice *dev)
{
return 0;
}
int kvm_arch_add_msi_route_post(struct kvm_irq_routing_entry *route,
int vector, PCIDevice *dev)
{
return 0;
}
int kvm_arch_release_virq_post(int virq)
{
return 0;
}
int kvm_arch_msi_data_to_gsi(uint32_t data)
{
return data & 0xffff;
}
#if defined(TARGET_PPC64)
int kvm_handle_nmi(PowerPCCPU *cpu, struct kvm_run *run)
{
target/ppc: Fix wrong interpretation of the disposition flag. Bitwise AND with kvm_run->flags to evaluate if we recovered from MCE or not is not correct, As disposition in kvm_run->flags is a two-bit integer value and not a bit map, So check for equality instead of bitwise AND. Without the fix qemu treats any unrecoverable mce error as recoverable and ends up in a mce loop inside the guest, Below are the MCE logs before and after the fix. Before fix: [ 66.775757] MCE: CPU0: Initiator CPU [ 66.775891] MCE: CPU0: Unknown [ 66.776587] MCE: CPU0: machine check (Harmless) Host UE Indeterminate [Recovered] [ 66.776857] MCE: CPU0: NIP: [c0080000000e00b8] mcetest_tlbie+0xb0/0x128 [mcetest_tlbie] After fix: [ 20.650577] CPU: 0 PID: 1415 Comm: insmod Tainted: G M O 5.6.0-fwnmi-arv+ #11 [ 20.650618] NIP: c0080000023a00e8 LR: c0080000023a00d8 CTR: c000000000021fe0 [ 20.650660] REGS: c0000001fffd3d70 TRAP: 0200 Tainted: G M O (5.6.0-fwnmi-arv+) [ 20.650708] MSR: 8000000002a0b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 42000222 XER: 20040000 [ 20.650758] CFAR: c00000000000b940 DAR: c0080000025e00e0 DSISR: 00000200 IRQMASK: 0 [ 20.650758] GPR00: c0080000023a00d8 c0000001fddd79a0 c0080000023a8500 0000000000000039 [ 20.650758] GPR04: 0000000000000001 0000000000000000 0000000000000000 0000000000000007 [ 20.650758] GPR08: 0000000000000007 c0080000025e00e0 0000000000000000 00000000000000f7 [ 20.650758] GPR12: 0000000000000000 c000000001900000 c00000000101f398 c0080000025c052f [ 20.650758] GPR16: 00000000000003a8 c0080000025c0000 c0000001fddd7d70 c0000000015b7940 [ 20.650758] GPR20: 000000000000fff1 c000000000f72c28 c0080000025a0988 0000000000000000 [ 20.650758] GPR24: 0000000000000100 c0080000023a05d0 c0000000001f1d70 0000000000000000 [ 20.650758] GPR28: c0000001fde20000 c0000001fd02b2e0 c0080000023a0000 c0080000025e0000 [ 20.651178] NIP [c0080000023a00e8] mcetest_tlbie+0xe8/0xf0 [mcetest_tlbie] [ 20.651220] LR [c0080000023a00d8] mcetest_tlbie+0xd8/0xf0 [mcetest_tlbie] [ 20.651262] Call Trace: [ 20.651280] [c0000001fddd79a0] [c0080000023a00d8] mcetest_tlbie+0xd8/0xf0 [mcetest_tlbie] (unreliable) [ 20.651340] [c0000001fddd7a10] [c00000000001091c] do_one_initcall+0x6c/0x2c0 [ 20.651390] [c0000001fddd7af0] [c0000000001f7998] do_init_module+0x90/0x298 [ 20.651433] [c0000001fddd7b80] [c0000000001f61a8] load_module+0x1f58/0x27a0 [ 20.651476] [c0000001fddd7d40] [c0000000001f6c70] __do_sys_finit_module+0xe0/0x100 [ 20.651526] [c0000001fddd7e20] [c00000000000b9d0] system_call+0x5c/0x68 [ 20.651567] Instruction dump: [ 20.651594] e8410018 3c620000 e8638020 480000cd e8410018 3c620000 e8638028 480000bd [ 20.651646] e8410018 7be904e4 39400000 612900e0 <7d434a64> 4bffff74 3c4c0001 38428410 [ 20.651699] ---[ end trace 4c40897f016b4340 ]--- [ 20.653310] Bus error [ 20.655575] MCE: CPU0: machine check (Harmless) Host UE Indeterminate [Not recovered] [ 20.655575] MCE: CPU0: NIP: [c0080000023a00e8] mcetest_tlbie+0xe8/0xf0 [mcetest_tlbie] [ 20.655576] MCE: CPU0: Initiator CPU [ 20.655576] MCE: CPU0: Unknown Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com> Message-Id: <20200408170944.16003-1-ganeshgr@linux.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-04-08 20:09:44 +03:00
uint16_t flags = run->flags & KVM_RUN_PPC_NMI_DISP_MASK;
cpu_synchronize_state(CPU(cpu));
target/ppc: Fix wrong interpretation of the disposition flag. Bitwise AND with kvm_run->flags to evaluate if we recovered from MCE or not is not correct, As disposition in kvm_run->flags is a two-bit integer value and not a bit map, So check for equality instead of bitwise AND. Without the fix qemu treats any unrecoverable mce error as recoverable and ends up in a mce loop inside the guest, Below are the MCE logs before and after the fix. Before fix: [ 66.775757] MCE: CPU0: Initiator CPU [ 66.775891] MCE: CPU0: Unknown [ 66.776587] MCE: CPU0: machine check (Harmless) Host UE Indeterminate [Recovered] [ 66.776857] MCE: CPU0: NIP: [c0080000000e00b8] mcetest_tlbie+0xb0/0x128 [mcetest_tlbie] After fix: [ 20.650577] CPU: 0 PID: 1415 Comm: insmod Tainted: G M O 5.6.0-fwnmi-arv+ #11 [ 20.650618] NIP: c0080000023a00e8 LR: c0080000023a00d8 CTR: c000000000021fe0 [ 20.650660] REGS: c0000001fffd3d70 TRAP: 0200 Tainted: G M O (5.6.0-fwnmi-arv+) [ 20.650708] MSR: 8000000002a0b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 42000222 XER: 20040000 [ 20.650758] CFAR: c00000000000b940 DAR: c0080000025e00e0 DSISR: 00000200 IRQMASK: 0 [ 20.650758] GPR00: c0080000023a00d8 c0000001fddd79a0 c0080000023a8500 0000000000000039 [ 20.650758] GPR04: 0000000000000001 0000000000000000 0000000000000000 0000000000000007 [ 20.650758] GPR08: 0000000000000007 c0080000025e00e0 0000000000000000 00000000000000f7 [ 20.650758] GPR12: 0000000000000000 c000000001900000 c00000000101f398 c0080000025c052f [ 20.650758] GPR16: 00000000000003a8 c0080000025c0000 c0000001fddd7d70 c0000000015b7940 [ 20.650758] GPR20: 000000000000fff1 c000000000f72c28 c0080000025a0988 0000000000000000 [ 20.650758] GPR24: 0000000000000100 c0080000023a05d0 c0000000001f1d70 0000000000000000 [ 20.650758] GPR28: c0000001fde20000 c0000001fd02b2e0 c0080000023a0000 c0080000025e0000 [ 20.651178] NIP [c0080000023a00e8] mcetest_tlbie+0xe8/0xf0 [mcetest_tlbie] [ 20.651220] LR [c0080000023a00d8] mcetest_tlbie+0xd8/0xf0 [mcetest_tlbie] [ 20.651262] Call Trace: [ 20.651280] [c0000001fddd79a0] [c0080000023a00d8] mcetest_tlbie+0xd8/0xf0 [mcetest_tlbie] (unreliable) [ 20.651340] [c0000001fddd7a10] [c00000000001091c] do_one_initcall+0x6c/0x2c0 [ 20.651390] [c0000001fddd7af0] [c0000000001f7998] do_init_module+0x90/0x298 [ 20.651433] [c0000001fddd7b80] [c0000000001f61a8] load_module+0x1f58/0x27a0 [ 20.651476] [c0000001fddd7d40] [c0000000001f6c70] __do_sys_finit_module+0xe0/0x100 [ 20.651526] [c0000001fddd7e20] [c00000000000b9d0] system_call+0x5c/0x68 [ 20.651567] Instruction dump: [ 20.651594] e8410018 3c620000 e8638020 480000cd e8410018 3c620000 e8638028 480000bd [ 20.651646] e8410018 7be904e4 39400000 612900e0 <7d434a64> 4bffff74 3c4c0001 38428410 [ 20.651699] ---[ end trace 4c40897f016b4340 ]--- [ 20.653310] Bus error [ 20.655575] MCE: CPU0: machine check (Harmless) Host UE Indeterminate [Not recovered] [ 20.655575] MCE: CPU0: NIP: [c0080000023a00e8] mcetest_tlbie+0xe8/0xf0 [mcetest_tlbie] [ 20.655576] MCE: CPU0: Initiator CPU [ 20.655576] MCE: CPU0: Unknown Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com> Message-Id: <20200408170944.16003-1-ganeshgr@linux.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-04-08 20:09:44 +03:00
spapr_mce_req_event(cpu, flags == KVM_RUN_PPC_NMI_DISP_FULLY_RECOV);
return 0;
}
#endif
int kvmppc_enable_hwrng(void)
{
if (!kvm_enabled() || !kvm_check_extension(kvm_state, KVM_CAP_PPC_HWRNG)) {
return -1;
}
return kvmppc_enable_hcall(kvm_state, H_RANDOM);
}
void kvmppc_check_papr_resize_hpt(Error **errp)
{
if (!kvm_enabled()) {
return; /* No KVM, we're good */
}
if (cap_resize_hpt) {
return; /* Kernel has explicit support, we're good */
}
/* Otherwise fallback on looking for PR KVM */
if (kvmppc_is_pr(kvm_state)) {
return;
}
error_setg(errp,
"Hash page table resizing not available with this KVM version");
}
int kvmppc_resize_hpt_prepare(PowerPCCPU *cpu, target_ulong flags, int shift)
{
CPUState *cs = CPU(cpu);
struct kvm_ppc_resize_hpt rhpt = {
.flags = flags,
.shift = shift,
};
if (!cap_resize_hpt) {
return -ENOSYS;
}
return kvm_vm_ioctl(cs->kvm_state, KVM_PPC_RESIZE_HPT_PREPARE, &rhpt);
}
int kvmppc_resize_hpt_commit(PowerPCCPU *cpu, target_ulong flags, int shift)
{
CPUState *cs = CPU(cpu);
struct kvm_ppc_resize_hpt rhpt = {
.flags = flags,
.shift = shift,
};
if (!cap_resize_hpt) {
return -ENOSYS;
}
return kvm_vm_ioctl(cs->kvm_state, KVM_PPC_RESIZE_HPT_COMMIT, &rhpt);
}
target/ppc: 'PVR != host PVR' in KVM_SET_SREGS workaround Commit d5fc133eed ("ppc: Rework CPU compatibility testing across migration") changed the way cpu_post_load behaves with the PVR setting, causing an unexpected bug in KVM-HV migrations between hosts that are compatible (POWER8 and POWER8E, for example). Even with pvr_match() returning true, the guest freezes right after cpu_post_load. The reason is that the guest kernel can't handle a different PVR value other that the running host in KVM_SET_SREGS. In [1] it was discussed the possibility of a new KVM capability that would indicate that the guest kernel can handle a different PVR in KVM_SET_SREGS. Even if such feature is implemented, there is still the problem with older kernels that will not have this capability and will fail to migrate. This patch implements a workaround for that scenario. If running with KVM, check if the guest kernel does not have the capability (named here as 'cap_ppc_pvr_compat'). If it doesn't, calls kvmppc_is_pr() to see if the guest is running in KVM-HV. If all this happens, set env->spr[SPR_PVR] to the same value as the current host PVR. This ensures that we allow migrations with 'close enough' PVRs to still work in KVM-HV but also makes the code ready for this new KVM capability when it is done. A new function called 'kvmppc_pvr_workaround_required' was created to encapsulate the conditions said above and to avoid calling too many kvm.c internals inside cpu_post_load. [1] https://lists.gnu.org/archive/html/qemu-ppc/2017-06/msg00503.html Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com> [dwg: Fix for the case of using TCG on a PPC host] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-08-09 23:43:46 +03:00
/*
* This is a helper function to detect a post migration scenario
* in which a guest, running as KVM-HV, freezes in cpu_post_load because
* the guest kernel can't handle a PVR value other than the actual host
* PVR in KVM_SET_SREGS, even if pvr_match() returns true.
*
* If we don't have cap_ppc_pvr_compat and we're not running in PR
* (so, we're HV), return true. The workaround itself is done in
* cpu_post_load.
*
* The order here is important: we'll only check for KVM PR as a
* fallback if the guest kernel can't handle the situation itself.
* We need to avoid as much as possible querying the running KVM type
* in QEMU level.
*/
bool kvmppc_pvr_workaround_required(PowerPCCPU *cpu)
{
CPUState *cs = CPU(cpu);
if (!kvm_enabled()) {
return false;
}
if (cap_ppc_pvr_compat) {
return false;
}
return !kvmppc_is_pr(cs->kvm_state);
}
void kvmppc_set_reg_ppc_online(PowerPCCPU *cpu, unsigned int online)
{
CPUState *cs = CPU(cpu);
if (kvm_enabled()) {
kvm_set_one_reg(cs, KVM_REG_PPC_ONLINE, &online);
}
}
void kvmppc_set_reg_tb_offset(PowerPCCPU *cpu, int64_t tb_offset)
{
CPUState *cs = CPU(cpu);
if (kvm_enabled()) {
kvm_set_one_reg(cs, KVM_REG_PPC_TB_OFFSET, &tb_offset);
}
}
bool kvm_arch_cpu_check_are_resettable(void)
{
return true;
}
void kvm_arch_accel_class_init(ObjectClass *oc)
{
}