qemu/configure

6070 lines
156 KiB
Plaintext
Raw Normal View History

#!/bin/sh
#
# qemu configure script (c) 2003 Fabrice Bellard
#
# Unset some variables known to interfere with behavior of common tools,
# just as autoconf does.
CLICOLOR_FORCE= GREP_OPTIONS=
unset CLICOLOR_FORCE GREP_OPTIONS
# Don't allow CCACHE, if present, to use cached results of compile tests!
export CCACHE_RECACHE=yes
# Temporary directory used for files created while
# configure runs. Since it is in the build directory
# we can safely blow away any previous version of it
# (and we need not jump through hoops to try to delete
# it when configure exits.)
TMPDIR1="config-temp"
rm -rf "${TMPDIR1}"
mkdir -p "${TMPDIR1}"
if [ $? -ne 0 ]; then
echo "ERROR: failed to create temporary directory"
exit 1
fi
TMPB="qemu-conf"
TMPC="${TMPDIR1}/${TMPB}.c"
TMPO="${TMPDIR1}/${TMPB}.o"
configure: Make C++ test work with --enable-werror gcc's C++ compiler complains about being passed some -W options which make sense for C but not for C++. This means we mustn't try a C++ compile with QEMU_CFLAGS, but only with a filtered version that removes the offending options. This filtering was already being done for uses of C++ in the build itself, but was omitted for the "does C++ work?" configure test. This only showed up when doing builds which explicitly enabled -Werror with --enable-werror, because the "do the compilers work" tests were mistakenly placed above the "default werror based on whether compiling from git" code. Another error in this category is that clang warns if you ask it to compile C++ code from a file named "foo.c". Further, because we were running do_cc in a subshell in the condition part of an "if", the error_exit inside do_compiler wouldn't terminate configure and we would plunge on regardless. Fix this complex of errors: 1. Move the default-werror code up so that there are no invocations of compile_object and friends between it and the point where we set $werror explicitly based on the --enable-werror command line option. 2. Provide a mechanism for filtering QEMU_CFLAGS to create QEMU_CXXFLAGS, and use it for the test we run here. 3. Provide a do_cxx function to run a test with the C++ compiler rather than doing cute tricks with subshells and do_cc. 4. Use a new temporary file TMPCXX for the C++ program fragment. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1393352869-22257-1-git-send-email-peter.maydell@linaro.org Tested-by: Andreas Färber <afaerber@suse.de>
2014-02-25 22:27:49 +04:00
TMPCXX="${TMPDIR1}/${TMPB}.cxx"
TMPL="${TMPDIR1}/${TMPB}.lo"
TMPA="${TMPDIR1}/lib${TMPB}.la"
TMPE="${TMPDIR1}/${TMPB}.exe"
TMPMO="${TMPDIR1}/${TMPB}.mo"
rm -f config.log
# Print a helpful header at the top of config.log
echo "# QEMU configure log $(date)" >> config.log
printf "# Configured with:" >> config.log
printf " '%s'" "$0" "$@" >> config.log
echo >> config.log
echo "#" >> config.log
error_exit() {
echo
echo "ERROR: $1"
while test -n "$2"; do
echo " $2"
shift
done
echo
exit 1
}
configure: Make C++ test work with --enable-werror gcc's C++ compiler complains about being passed some -W options which make sense for C but not for C++. This means we mustn't try a C++ compile with QEMU_CFLAGS, but only with a filtered version that removes the offending options. This filtering was already being done for uses of C++ in the build itself, but was omitted for the "does C++ work?" configure test. This only showed up when doing builds which explicitly enabled -Werror with --enable-werror, because the "do the compilers work" tests were mistakenly placed above the "default werror based on whether compiling from git" code. Another error in this category is that clang warns if you ask it to compile C++ code from a file named "foo.c". Further, because we were running do_cc in a subshell in the condition part of an "if", the error_exit inside do_compiler wouldn't terminate configure and we would plunge on regardless. Fix this complex of errors: 1. Move the default-werror code up so that there are no invocations of compile_object and friends between it and the point where we set $werror explicitly based on the --enable-werror command line option. 2. Provide a mechanism for filtering QEMU_CFLAGS to create QEMU_CXXFLAGS, and use it for the test we run here. 3. Provide a do_cxx function to run a test with the C++ compiler rather than doing cute tricks with subshells and do_cc. 4. Use a new temporary file TMPCXX for the C++ program fragment. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1393352869-22257-1-git-send-email-peter.maydell@linaro.org Tested-by: Andreas Färber <afaerber@suse.de>
2014-02-25 22:27:49 +04:00
do_compiler() {
# Run the compiler, capturing its output to the log. First argument
# is compiler binary to execute.
local compiler="$1"
shift
echo $compiler "$@" >> config.log
$compiler "$@" >> config.log 2>&1 || return $?
# Test passed. If this is an --enable-werror build, rerun
# the test with -Werror and bail out if it fails. This
# makes warning-generating-errors in configure test code
# obvious to developers.
if test "$werror" != "yes"; then
return 0
fi
# Don't bother rerunning the compile if we were already using -Werror
case "$*" in
*-Werror*)
return 0
;;
esac
configure: Make C++ test work with --enable-werror gcc's C++ compiler complains about being passed some -W options which make sense for C but not for C++. This means we mustn't try a C++ compile with QEMU_CFLAGS, but only with a filtered version that removes the offending options. This filtering was already being done for uses of C++ in the build itself, but was omitted for the "does C++ work?" configure test. This only showed up when doing builds which explicitly enabled -Werror with --enable-werror, because the "do the compilers work" tests were mistakenly placed above the "default werror based on whether compiling from git" code. Another error in this category is that clang warns if you ask it to compile C++ code from a file named "foo.c". Further, because we were running do_cc in a subshell in the condition part of an "if", the error_exit inside do_compiler wouldn't terminate configure and we would plunge on regardless. Fix this complex of errors: 1. Move the default-werror code up so that there are no invocations of compile_object and friends between it and the point where we set $werror explicitly based on the --enable-werror command line option. 2. Provide a mechanism for filtering QEMU_CFLAGS to create QEMU_CXXFLAGS, and use it for the test we run here. 3. Provide a do_cxx function to run a test with the C++ compiler rather than doing cute tricks with subshells and do_cc. 4. Use a new temporary file TMPCXX for the C++ program fragment. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1393352869-22257-1-git-send-email-peter.maydell@linaro.org Tested-by: Andreas Färber <afaerber@suse.de>
2014-02-25 22:27:49 +04:00
echo $compiler -Werror "$@" >> config.log
$compiler -Werror "$@" >> config.log 2>&1 && return $?
error_exit "configure test passed without -Werror but failed with -Werror." \
"This is probably a bug in the configure script. The failing command" \
"will be at the bottom of config.log." \
"You can run configure with --disable-werror to bypass this check."
}
configure: Make C++ test work with --enable-werror gcc's C++ compiler complains about being passed some -W options which make sense for C but not for C++. This means we mustn't try a C++ compile with QEMU_CFLAGS, but only with a filtered version that removes the offending options. This filtering was already being done for uses of C++ in the build itself, but was omitted for the "does C++ work?" configure test. This only showed up when doing builds which explicitly enabled -Werror with --enable-werror, because the "do the compilers work" tests were mistakenly placed above the "default werror based on whether compiling from git" code. Another error in this category is that clang warns if you ask it to compile C++ code from a file named "foo.c". Further, because we were running do_cc in a subshell in the condition part of an "if", the error_exit inside do_compiler wouldn't terminate configure and we would plunge on regardless. Fix this complex of errors: 1. Move the default-werror code up so that there are no invocations of compile_object and friends between it and the point where we set $werror explicitly based on the --enable-werror command line option. 2. Provide a mechanism for filtering QEMU_CFLAGS to create QEMU_CXXFLAGS, and use it for the test we run here. 3. Provide a do_cxx function to run a test with the C++ compiler rather than doing cute tricks with subshells and do_cc. 4. Use a new temporary file TMPCXX for the C++ program fragment. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1393352869-22257-1-git-send-email-peter.maydell@linaro.org Tested-by: Andreas Färber <afaerber@suse.de>
2014-02-25 22:27:49 +04:00
do_cc() {
do_compiler "$cc" "$@"
}
do_cxx() {
do_compiler "$cxx" "$@"
}
update_cxxflags() {
# Set QEMU_CXXFLAGS from QEMU_CFLAGS by filtering out those
# options which some versions of GCC's C++ compiler complain about
# because they only make sense for C programs.
QEMU_CXXFLAGS=
for arg in $QEMU_CFLAGS; do
case $arg in
-Wstrict-prototypes|-Wmissing-prototypes|-Wnested-externs|\
-Wold-style-declaration|-Wold-style-definition|-Wredundant-decls)
;;
*)
QEMU_CXXFLAGS=${QEMU_CXXFLAGS:+$QEMU_CXXFLAGS }$arg
;;
esac
done
}
compile_object() {
local_cflags="$1"
do_cc $QEMU_CFLAGS $local_cflags -c -o $TMPO $TMPC
}
compile_prog() {
local_cflags="$1"
local_ldflags="$2"
do_cc $QEMU_CFLAGS $local_cflags -o $TMPE $TMPC $LDFLAGS $local_ldflags
}
# symbolically link $1 to $2. Portable version of "ln -sf".
symlink() {
rm -rf "$2"
mkdir -p "$(dirname "$2")"
ln -s "$1" "$2"
}
# check whether a command is available to this shell (may be either an
# executable or a builtin)
has() {
type "$1" >/dev/null 2>&1
}
# search for an executable in PATH
path_of() {
local_command="$1"
local_ifs="$IFS"
local_dir=""
# pathname has a dir component?
if [ "${local_command#*/}" != "$local_command" ]; then
if [ -x "$local_command" ] && [ ! -d "$local_command" ]; then
echo "$local_command"
return 0
fi
fi
if [ -z "$local_command" ]; then
return 1
fi
IFS=:
for local_dir in $PATH; do
if [ -x "$local_dir/$local_command" ] && [ ! -d "$local_dir/$local_command" ]; then
echo "$local_dir/$local_command"
IFS="${local_ifs:-$(printf ' \t\n')}"
return 0
fi
done
# not found
IFS="${local_ifs:-$(printf ' \t\n')}"
return 1
}
have_backend () {
echo "$trace_backends" | grep "$1" >/dev/null
}
# default parameters
source_path=$(dirname "$0")
cpu=""
iasl="iasl"
interp_prefix="/usr/gnemul/qemu-%M"
static="no"
cross_prefix=""
audio_drv_list=""
block_drv_rw_whitelist=""
block_drv_ro_whitelist=""
host_cc="cc"
libs_softmmu=""
libs_tools=""
audio_pt_int=""
audio_win_int=""
cc_i386=i386-pc-linux-gnu-gcc
libs_qga=""
debug_info="yes"
configure: add option to disable -fstack-protector flags The -fstack-protector flag family is useful for ensuring safety and for debugging, but has a performance impact. Here are some boot time comparisons of the various versions of -fstack-protector using qemu-system-arm on an x86_64 host: # -fstack-protector-all Startup finished in 1.810s (kernel) + 12.331s (initrd) + 49.016s (userspace) = 1min 3.159s Startup finished in 1.801s (kernel) + 12.287s (initrd) + 47.925s (userspace) = 1min 2.013s Startup finished in 1.812s (kernel) + 12.302s (initrd) + 47.995s (userspace) = 1min 2.111s # -fstack-protector-strong Startup finished in 1.744s (kernel) + 11.223s (initrd) + 44.688s (userspace) = 57.657s Startup finished in 1.721s (kernel) + 11.222s (initrd) + 44.194s (userspace) = 57.138s Startup finished in 1.693s (kernel) + 11.250s (initrd) + 44.426s (userspace) = 57.370s # -fstack-protector Startup finished in 1.705s (kernel) + 11.409s (initrd) + 43.563s (userspace) = 56.677s Startup finished in 1.877s (kernel) + 11.137s (initrd) + 43.719s (userspace) = 56.734s Startup finished in 1.708s (kernel) + 11.141s (initrd) + 43.628s (userspace) = 56.478s # no stack protector Startup finished in 1.743s (kernel) + 11.190s (initrd) + 43.709s (userspace) = 56.643s Startup finished in 1.763s (kernel) + 11.216s (initrd) + 43.767s (userspace) = 56.747s Startup finished in 1.711s (kernel) + 11.283s (initrd) + 43.878s (userspace) = 56.873s This patch introduces a configure option to disable the stack protector entirely, and conditional stack protector flag selection (in order, based on availability): -fstack-protector-strong, -fstack-protector-all, no stack protector. Signed-off-by: Steven Noonan <snoonan@amazon.com> Cc: Anthony Liguori <aliguori@amazon.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> [Prefer -fstack-protector-all to -fstack-protector, suggested by Laurent Desnogues. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-03-28 20:19:02 +04:00
stack_protector=""
# Don't accept a target_list environment variable.
unset target_list
# Default value for a variable defining feature "foo".
# * foo="no" feature will only be used if --enable-foo arg is given
# * foo="" feature will be searched for, and if found, will be used
# unless --disable-foo is given
# * foo="yes" this value will only be set by --enable-foo flag.
# feature will searched for,
# if not found, configure exits with error
#
# Always add --enable-foo and --disable-foo command line args.
# Distributions want to ensure that several features are compiled in, and it
# is impossible without a --enable-foo that exits if a feature is not found.
bluez=""
brlapi=""
curl=""
curses=""
docs=""
fdt=""
netmap="no"
pixman=""
sdl=""
sdlabi=""
virtfs=""
vnc="yes"
sparse="no"
vde=""
vnc_sasl=""
vnc_jpeg=""
vnc_png=""
xen=""
xen_ctrl_version=""
xen_pv_domain_build="no"
xen_pci_passthrough=""
linux_aio=""
cap_ng=""
attr=""
libattr=""
xfs=""
vhost_net="no"
vhost-scsi: new device supporting the tcm_vhost Linux kernel module The WWPN specified in configfs is passed to "-device vhost-scsi-pci". The tgpt field of the SET_ENDPOINT ioctl is obsolete now, so it is not available from the QEMU command-line. Instead, I hardcode it to zero. Changes in Patch-v2: - Add vhost_scsi_get_features() in order to determine feature bits supports by host kernel (mst + nab) - Re-enable usage of DEFINE_VIRTIO_COMMON_FEATURES, and allow EVENT_IDX to be disabled by host in vhost_scsi_get_features() - Drop unused hotplug bit in DEFINE_VHOST_SCSI_PROPERTIES Changes in Patch-v1: - Set event_idx=off by default (nab, thanks asias) - Disable hotplug feature bit for v3.9 tcm_vhost kernel code, need to re-enable in v3.10 (nab) - Update to latest qemu.git/master HEAD Changes in WIP-V3: - Drop ioeventfd vhost_scsi_properties (asias, thanks stefanha) - Add CONFIG_VHOST_SCSI (asias, thanks stefanha) - Add hotplug feature bit Changes in WIP-V2: - Add backend guest masking support (nab) - Bump ABI_VERSION to 1 (nab) - Set up set_guest_notifiers (asias) - Set up vs->dev.vq_index (asias) - Drop vs->vs.vdev.{set,clear}_vhost_endpoint (asias) - Drop VIRTIO_CONFIG_S_DRIVER check in vhost_scsi_set_status (asias) Howto: Use the latest seabios, at least commit b44a7be17b git clone git://git.seabios.org/seabios.git make cp out/bios.bin /usr/share/qemu/bios.bin qemu -device vhost-scsi-pci,wwpn=naa.6001405bd4e8476d,event_idx=off ... Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Asias He <asias@redhat.com> [ Rebase on top of VirtIOSCSICommon patch, fix bugs in feature negotiation and irqfd masking - Paolo ] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-29 05:08:16 +04:00
vhost_scsi="no"
vhost_vsock="no"
kvm="no"
rdma=""
gprof="no"
debug_tcg="no"
debug="no"
fortify_source=""
strip_opt="yes"
tcg_interpreter="no"
bigendian="no"
mingw32="no"
gcov="no"
gcov_tool="gcov"
EXESUF=""
DSOSUF=".so"
LDFLAGS_SHARED="-shared"
modules="no"
prefix="/usr/local"
mandir="\${prefix}/share/man"
datadir="\${prefix}/share"
qemu_docdir="\${prefix}/share/doc/qemu"
bindir="\${prefix}/bin"
2011-05-15 13:08:59 +04:00
libdir="\${prefix}/lib"
libexecdir="\${prefix}/libexec"
includedir="\${prefix}/include"
sysconfdir="\${prefix}/etc"
local_statedir="\${prefix}/var"
confsuffix="/qemu"
slirp="yes"
oss_lib=""
bsd="no"
linux="no"
solaris="no"
profiler="no"
cocoa="no"
softmmu="yes"
linux_user="no"
bsd_user="no"
aix="no"
blobs="yes"
pkgversion=""
pie=""
qom_cast_debug="yes"
trace_backends="log"
trace_file="trace"
spice=""
rbd=""
smartcard=""
libusb=""
usb_redir=""
opengl=""
opengl_dmabuf="no"
avx2_opt="no"
zlib="yes"
lzo=""
snappy=""
bzip2=""
guest_agent=""
guest_agent_with_vss="no"
guest_agent_ntddscsi="no"
guest_agent_msi=""
vss_win32_sdk=""
win_sdk="no"
want_tools="yes"
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 12:24:24 +04:00
libiscsi=""
libnfs=""
coroutine=""
coroutine_pool=""
seccomp=""
glusterfs=""
glusterfs_xlator_opt="no"
glusterfs_discard="no"
glusterfs_zerofill="no"
archipelago="no"
gtk=""
gtkabi=""
gtk_gl="no"
tls_priority="NORMAL"
gnutls=""
gnutls_rnd=""
nettle=""
nettle_kdf="no"
gcrypt=""
gcrypt_kdf="no"
vte=""
virglrenderer=""
tpm="yes"
libssh2=""
numa=""
tcmalloc="no"
configure: Add support for jemalloc This adds "--enable-jemalloc" and "--disable-jemalloc" to allow linking to jemalloc memory allocator. We have already tcmalloc support, but it seem to not working well with a lot of iothreads/disks. The main problem is that tcmalloc use a shared thread cache of 16MB by default. With more threads, this cache is shared, and some bad garbage collections can occur if the cache is too low. It's possible to tcmalloc cache increase it with a env var: TCMALLOC_MAX_TOTAL_THREAD_CACHE_BYTES=256MB With default 16MB, performances are really bad with more than 2 disks. Increasing to 256MB, it's helping but still have problem with 16 disks/iothreads. Jemalloc don't have performance problem with default configuration. Here the benchmark results in iops of 1 qemu vm randread 4K iodepth=32, with rbd block backend (librbd is doing a lot of memory allocation), 1 iothread by disk glibc malloc ------------ 1 disk 29052 2 disks 55878 4 disks 127899 8 disks 240566 15 disks 269976 jemalloc -------- 1 disk 41278 2 disks 75781 4 disks 195351 8 disks 294241 15 disks 298199 tcmalloc 2.2.1 default 16M cache -------------------------------- 1 disk 37911 2 disks 67698 4 disks 41076 8 disks 43312 15 disks 37569 tcmalloc : 256M cache --------------------------- 1 disk 33914 2 disks 58839 4 disks 148205 8 disks 213298 15 disks 218383 Signed-off-by: Alexandre Derumier <aderumier@odiso.com> Message-Id: <1434711418-20429-1-git-send-email-aderumier@odiso.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-19 13:56:58 +03:00
jemalloc="no"
replication="yes"
# parse CC options first
for opt do
optarg=$(expr "x$opt" : 'x[^=]*=\(.*\)')
case "$opt" in
--cross-prefix=*) cross_prefix="$optarg"
;;
--cc=*) CC="$optarg"
;;
--cxx=*) CXX="$optarg"
;;
--source-path=*) source_path="$optarg"
;;
--cpu=*) cpu="$optarg"
;;
--extra-cflags=*) QEMU_CFLAGS="$QEMU_CFLAGS $optarg"
EXTRA_CFLAGS="$optarg"
;;
--extra-ldflags=*) LDFLAGS="$LDFLAGS $optarg"
EXTRA_LDFLAGS="$optarg"
;;
--enable-debug-info) debug_info="yes"
;;
--disable-debug-info) debug_info="no"
;;
esac
done
# OS specific
# Using uname is really, really broken. Once we have the right set of checks
# we can eliminate its usage altogether.
# Preferred compiler:
# ${CC} (if set)
# ${cross_prefix}gcc (if cross-prefix specified)
# system compiler
if test -z "${CC}${cross_prefix}"; then
cc="$host_cc"
else
cc="${CC-${cross_prefix}gcc}"
fi
if test -z "${CXX}${cross_prefix}"; then
cxx="c++"
else
cxx="${CXX-${cross_prefix}g++}"
fi
ar="${AR-${cross_prefix}ar}"
as="${AS-${cross_prefix}as}"
ccas="${CCAS-$cc}"
cpp="${CPP-$cc -E}"
objcopy="${OBJCOPY-${cross_prefix}objcopy}"
ld="${LD-${cross_prefix}ld}"
nm="${NM-${cross_prefix}nm}"
strip="${STRIP-${cross_prefix}strip}"
windres="${WINDRES-${cross_prefix}windres}"
pkg_config_exe="${PKG_CONFIG-${cross_prefix}pkg-config}"
query_pkg_config() {
"${pkg_config_exe}" ${QEMU_PKG_CONFIG_FLAGS} "$@"
}
pkg_config=query_pkg_config
sdl_config="${SDL_CONFIG-${cross_prefix}sdl-config}"
sdl2_config="${SDL2_CONFIG-${cross_prefix}sdl2-config}"
# If the user hasn't specified ARFLAGS, default to 'rv', just as make does.
ARFLAGS="${ARFLAGS-rv}"
# default flags for all hosts
# We use -fwrapv to tell the compiler that we require a C dialect where
# left shift of signed integers is well defined and has the expected
# 2s-complement style results. (Both clang and gcc agree that it
# provides these semantics.)
QEMU_CFLAGS="-fno-strict-aliasing -fno-common -fwrapv $QEMU_CFLAGS"
QEMU_CFLAGS="-Wall -Wundef -Wwrite-strings -Wmissing-prototypes $QEMU_CFLAGS"
QEMU_CFLAGS="-Wstrict-prototypes -Wredundant-decls $QEMU_CFLAGS"
QEMU_CFLAGS="-D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE $QEMU_CFLAGS"
QEMU_INCLUDES="-I. -I\$(SRC_PATH) -I\$(SRC_PATH)/include"
if test "$debug_info" = "yes"; then
CFLAGS="-g $CFLAGS"
LDFLAGS="-g $LDFLAGS"
fi
# make source path absolute
source_path=$(cd "$source_path"; pwd)
# running configure in the source tree?
# we know that's the case if configure is there.
if test -f "./configure"; then
pwd_is_source_path="y"
else
pwd_is_source_path="n"
fi
check_define() {
cat > $TMPC <<EOF
#if !defined($1)
#error $1 not defined
#endif
int main(void) { return 0; }
EOF
compile_object
}
check_include() {
cat > $TMPC <<EOF
#include <$1>
int main(void) { return 0; }
EOF
compile_object
}
write_c_skeleton() {
cat > $TMPC <<EOF
int main(void) { return 0; }
EOF
}
if check_define __linux__ ; then
targetos="Linux"
elif check_define _WIN32 ; then
targetos='MINGW32'
elif check_define __OpenBSD__ ; then
targetos='OpenBSD'
elif check_define __sun__ ; then
targetos='SunOS'
elif check_define __HAIKU__ ; then
targetos='Haiku'
else
targetos=$(uname -s)
fi
# Some host OSes need non-standard checks for which CPU to use.
# Note that these checks are broken for cross-compilation: if you're
# cross-compiling to one of these OSes then you'll need to specify
# the correct CPU with the --cpu option.
case $targetos in
Darwin)
# on Leopard most of the system is 32-bit, so we have to ask the kernel if we can
# run 64-bit userspace code.
# If the user didn't specify a CPU explicitly and the kernel says this is
# 64 bit hw, then assume x86_64. Otherwise fall through to the usual detection code.
if test -z "$cpu" && test "$(sysctl -n hw.optional.x86_64)" = "1"; then
cpu="x86_64"
fi
;;
SunOS)
# $(uname -m) returns i86pc even on an x86_64 box, so default based on isainfo
if test -z "$cpu" && test "$(isainfo -k)" = "amd64"; then
cpu="x86_64"
fi
esac
if test ! -z "$cpu" ; then
# command line argument
:
elif check_define __i386__ ; then
cpu="i386"
elif check_define __x86_64__ ; then
if check_define __ILP32__ ; then
cpu="x32"
else
cpu="x86_64"
fi
elif check_define __sparc__ ; then
if check_define __arch64__ ; then
cpu="sparc64"
else
cpu="sparc"
fi
elif check_define _ARCH_PPC ; then
if check_define _ARCH_PPC64 ; then
cpu="ppc64"
else
cpu="ppc"
fi
elif check_define __mips__ ; then
cpu="mips"
tcg: initial ia64 support A few words about design choices: * On IA64, instructions should be grouped by bundle, and dependencies between instructions declared. A first version of this code tried to schedule instructions automatically, but was very complex and too invasive for the current common TCG code (ops not ending at instruction boundaries, code retranslation breaking already generated code, etc.) It was also not very efficient, as dependencies between TCG ops is not available. Instead the option taken by the current implementation does not try to fill the bundle by scheduling instructions, but by providing ops not available as an ia64 instruction, and by offering 22-bit constant loading for most of the instructions. With both options the bundle are filled at approximately the same level. * Up to 128 registers can be affected to a function on IA64, but TCG limits this number to 64, which is actually more than enough. The register affectation is the following: - r0: used to map a constant argument with value 0 - r1: global pointer - r2, r3: internal use - r4 to r6: not used to avoid saving them - r7: env structure - r8 to r11: free for TCG (call clobbered) - r12: stack pointer - r13: thread pointer - r14 to r31: free for TCG (call clobbered) - r32: reserved (return address) - r33: reserved (PFS) - r33 to r63: free for TCG * The IA64 architecture has only 64-bit registers and no 32-bit instructions (the only exception being cmp4). Therefore 64-bit registers and instructions are used for 32-bit ops. The adopted strategy is the same as the ABI, that is the higher 32 bits are undefined. Most ops (and, or, add, shl, etc.) can directly use the 64-bit registers, while some others have to sign-extend (sar, div, etc.) or zero-extend (shr, divu, etc.) the register first. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-29 04:12:51 +04:00
elif check_define __ia64__ ; then
cpu="ia64"
elif check_define __s390__ ; then
if check_define __s390x__ ; then
cpu="s390x"
else
cpu="s390"
fi
elif check_define __arm__ ; then
cpu="arm"
elif check_define __aarch64__ ; then
cpu="aarch64"
else
cpu=$(uname -m)
fi
ARCH=
# Normalise host CPU name and set ARCH.
# Note that this case should only have supported host CPUs, not guests.
case "$cpu" in
ia64|ppc|ppc64|s390|s390x|sparc64|x32)
cpu="$cpu"
;;
i386|i486|i586|i686|i86pc|BePC)
cpu="i386"
;;
x86_64|amd64)
cpu="x86_64"
;;
armv*b|armv*l|arm)
cpu="arm"
;;
aarch64)
cpu="aarch64"
;;
mips*)
cpu="mips"
;;
sparc|sun4[cdmuv])
cpu="sparc"
;;
*)
# This will result in either an error or falling back to TCI later
ARCH=unknown
;;
esac
if test -z "$ARCH"; then
ARCH="$cpu"
fi
# OS specific
# host *BSD for user mode
HOST_VARIANT_DIR=""
case $targetos in
CYGWIN*)
mingw32="yes"
QEMU_CFLAGS="-mno-cygwin $QEMU_CFLAGS"
audio_possible_drivers="sdl"
audio_drv_list="sdl"
;;
MINGW32*)
mingw32="yes"
audio_possible_drivers="dsound sdl"
if check_include dsound.h; then
audio_drv_list="dsound"
else
audio_drv_list=""
fi
;;
GNU/kFreeBSD)
bsd="yes"
audio_drv_list="oss"
audio_possible_drivers="oss sdl pa"
;;
FreeBSD)
bsd="yes"
make="${MAKE-gmake}"
audio_drv_list="oss"
audio_possible_drivers="oss sdl pa"
# needed for kinfo_getvmmap(3) in libutil.h
LIBS="-lutil $LIBS"
netmap="" # enable netmap autodetect
HOST_VARIANT_DIR="freebsd"
;;
DragonFly)
bsd="yes"
make="${MAKE-gmake}"
audio_drv_list="oss"
audio_possible_drivers="oss sdl pa"
HOST_VARIANT_DIR="dragonfly"
;;
NetBSD)
bsd="yes"
make="${MAKE-gmake}"
audio_drv_list="oss"
audio_possible_drivers="oss sdl"
oss_lib="-lossaudio"
HOST_VARIANT_DIR="netbsd"
;;
OpenBSD)
bsd="yes"
make="${MAKE-gmake}"
audio_drv_list="sdl"
audio_possible_drivers="sdl"
HOST_VARIANT_DIR="openbsd"
;;
Darwin)
bsd="yes"
darwin="yes"
LDFLAGS_SHARED="-bundle -undefined dynamic_lookup"
if [ "$cpu" = "x86_64" ] ; then
QEMU_CFLAGS="-arch x86_64 $QEMU_CFLAGS"
LDFLAGS="-arch x86_64 $LDFLAGS"
fi
cocoa="yes"
audio_drv_list="coreaudio"
audio_possible_drivers="coreaudio sdl"
LDFLAGS="-framework CoreFoundation -framework IOKit $LDFLAGS"
libs_softmmu="-F/System/Library/Frameworks -framework Cocoa -framework IOKit $libs_softmmu"
# Disable attempts to use ObjectiveC features in os/object.h since they
# won't work when we're compiling with gcc as a C compiler.
QEMU_CFLAGS="-DOS_OBJECT_USE_OBJC=0 $QEMU_CFLAGS"
HOST_VARIANT_DIR="darwin"
;;
SunOS)
solaris="yes"
make="${MAKE-gmake}"
install="${INSTALL-ginstall}"
ld="gld"
smbd="${SMBD-/usr/sfw/sbin/smbd}"
needs_libsunmath="no"
solarisrev=$(uname -r | cut -f2 -d.)
if [ "$cpu" = "i386" -o "$cpu" = "x86_64" ] ; then
if test "$solarisrev" -le 9 ; then
if test -f /opt/SUNWspro/prod/lib/libsunmath.so.1; then
needs_libsunmath="yes"
QEMU_CFLAGS="-I/opt/SUNWspro/prod/include/cc $QEMU_CFLAGS"
LDFLAGS="-L/opt/SUNWspro/prod/lib -R/opt/SUNWspro/prod/lib $LDFLAGS"
LIBS="-lsunmath $LIBS"
else
error_exit "QEMU will not link correctly on Solaris 8/X86 or 9/x86 without" \
"libsunmath from the Sun Studio compilers tools, due to a lack of" \
"C99 math features in libm.so in Solaris 8/x86 and Solaris 9/x86" \
"Studio 11 can be downloaded from www.sun.com."
fi
fi
fi
if test -f /usr/include/sys/soundcard.h ; then
audio_drv_list="oss"
fi
audio_possible_drivers="oss sdl"
# needed for CMSG_ macros in sys/socket.h
QEMU_CFLAGS="-D_XOPEN_SOURCE=600 $QEMU_CFLAGS"
# needed for TIOCWIN* defines in termios.h
QEMU_CFLAGS="-D__EXTENSIONS__ $QEMU_CFLAGS"
QEMU_CFLAGS="-std=gnu99 $QEMU_CFLAGS"
solarisnetlibs="-lsocket -lnsl -lresolv"
LIBS="$solarisnetlibs $LIBS"
libs_qga="$solarisnetlibs $libs_qga"
;;
AIX)
aix="yes"
make="${MAKE-gmake}"
;;
Haiku)
haiku="yes"
QEMU_CFLAGS="-DB_USE_POSITIVE_POSIX_ERRORS $QEMU_CFLAGS"
LIBS="-lposix_error_mapper -lnetwork $LIBS"
;;
*)
audio_drv_list="oss"
audio_possible_drivers="oss alsa sdl pa"
linux="yes"
linux_user="yes"
kvm="yes"
vhost_net="yes"
vhost-scsi: new device supporting the tcm_vhost Linux kernel module The WWPN specified in configfs is passed to "-device vhost-scsi-pci". The tgpt field of the SET_ENDPOINT ioctl is obsolete now, so it is not available from the QEMU command-line. Instead, I hardcode it to zero. Changes in Patch-v2: - Add vhost_scsi_get_features() in order to determine feature bits supports by host kernel (mst + nab) - Re-enable usage of DEFINE_VIRTIO_COMMON_FEATURES, and allow EVENT_IDX to be disabled by host in vhost_scsi_get_features() - Drop unused hotplug bit in DEFINE_VHOST_SCSI_PROPERTIES Changes in Patch-v1: - Set event_idx=off by default (nab, thanks asias) - Disable hotplug feature bit for v3.9 tcm_vhost kernel code, need to re-enable in v3.10 (nab) - Update to latest qemu.git/master HEAD Changes in WIP-V3: - Drop ioeventfd vhost_scsi_properties (asias, thanks stefanha) - Add CONFIG_VHOST_SCSI (asias, thanks stefanha) - Add hotplug feature bit Changes in WIP-V2: - Add backend guest masking support (nab) - Bump ABI_VERSION to 1 (nab) - Set up set_guest_notifiers (asias) - Set up vs->dev.vq_index (asias) - Drop vs->vs.vdev.{set,clear}_vhost_endpoint (asias) - Drop VIRTIO_CONFIG_S_DRIVER check in vhost_scsi_set_status (asias) Howto: Use the latest seabios, at least commit b44a7be17b git clone git://git.seabios.org/seabios.git make cp out/bios.bin /usr/share/qemu/bios.bin qemu -device vhost-scsi-pci,wwpn=naa.6001405bd4e8476d,event_idx=off ... Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Asias He <asias@redhat.com> [ Rebase on top of VirtIOSCSICommon patch, fix bugs in feature negotiation and irqfd masking - Paolo ] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-29 05:08:16 +04:00
vhost_scsi="yes"
vhost_vsock="yes"
QEMU_INCLUDES="-I\$(SRC_PATH)/linux-headers -I$(pwd)/linux-headers $QEMU_INCLUDES"
;;
esac
if [ "$bsd" = "yes" ] ; then
if [ "$darwin" != "yes" ] ; then
bsd_user="yes"
fi
fi
: ${make=${MAKE-make}}
: ${install=${INSTALL-install}}
: ${python=${PYTHON-python}}
: ${smbd=${SMBD-/usr/sbin/smbd}}
# Default objcc to clang if available, otherwise use CC
if has clang; then
objcc=clang
else
objcc="$cc"
fi
if test "$mingw32" = "yes" ; then
EXESUF=".exe"
DSOSUF=".dll"
QEMU_CFLAGS="-DWIN32_LEAN_AND_MEAN -DWINVER=0x501 $QEMU_CFLAGS"
# enable C99/POSIX format strings (needs mingw32-runtime 3.15 or later)
QEMU_CFLAGS="-D__USE_MINGW_ANSI_STDIO=1 $QEMU_CFLAGS"
# MinGW needs -mthreads for TLS and macro _MT.
QEMU_CFLAGS="-mthreads $QEMU_CFLAGS"
LIBS="-lwinmm -lws2_32 -liphlpapi $LIBS"
write_c_skeleton;
if compile_prog "" "-liberty" ; then
LIBS="-liberty $LIBS"
fi
prefix="c:/Program Files/QEMU"
mandir="\${prefix}"
datadir="\${prefix}"
qemu_docdir="\${prefix}"
bindir="\${prefix}"
sysconfdir="\${prefix}"
local_statedir=
confsuffix=""
libs_qga="-lws2_32 -lwinmm -lpowrprof -liphlpapi -lnetapi32 $libs_qga"
fi
werror=""
for opt do
optarg=$(expr "x$opt" : 'x[^=]*=\(.*\)')
case "$opt" in
--help|-h) show_help=yes
;;
--version|-V) exec cat $source_path/VERSION
;;
--prefix=*) prefix="$optarg"
;;
--interp-prefix=*) interp_prefix="$optarg"
;;
--source-path=*)
;;
--cross-prefix=*)
;;
--cc=*)
;;
--host-cc=*) host_cc="$optarg"
;;
--cxx=*)
;;
--iasl=*) iasl="$optarg"
;;
--objcc=*) objcc="$optarg"
;;
--make=*) make="$optarg"
;;
--install=*) install="$optarg"
;;
--python=*) python="$optarg"
;;
--gcov=*) gcov_tool="$optarg"
;;
--smbd=*) smbd="$optarg"
;;
--extra-cflags=*)
;;
--extra-ldflags=*)
;;
--enable-debug-info)
;;
--disable-debug-info)
;;
--enable-modules)
modules="yes"
;;
--disable-modules)
modules="no"
;;
--cpu=*)
;;
--target-list=*) target_list="$optarg"
;;
--enable-trace-backends=*) trace_backends="$optarg"
;;
# XXX: backwards compatibility
--enable-trace-backend=*) trace_backends="$optarg"
;;
--with-trace-file=*) trace_file="$optarg"
;;
--enable-gprof) gprof="yes"
;;
--enable-gcov) gcov="yes"
;;
--static)
static="yes"
LDFLAGS="-static $LDFLAGS"
QEMU_PKG_CONFIG_FLAGS="--static $QEMU_PKG_CONFIG_FLAGS"
;;
--mandir=*) mandir="$optarg"
;;
--bindir=*) bindir="$optarg"
;;
2011-05-15 13:08:59 +04:00
--libdir=*) libdir="$optarg"
;;
--libexecdir=*) libexecdir="$optarg"
;;
--includedir=*) includedir="$optarg"
;;
--datadir=*) datadir="$optarg"
;;
--with-confsuffix=*) confsuffix="$optarg"
;;
--docdir=*) qemu_docdir="$optarg"
;;
--sysconfdir=*) sysconfdir="$optarg"
;;
--localstatedir=*) local_statedir="$optarg"
;;
--sbindir=*|--sharedstatedir=*|\
--oldincludedir=*|--datarootdir=*|--infodir=*|--localedir=*|\
--htmldir=*|--dvidir=*|--pdfdir=*|--psdir=*)
# These switches are silently ignored, for compatibility with
# autoconf-generated configure scripts. This allows QEMU's
# configure to be used by RPM and similar macros that set
# lots of directory switches by default.
;;
--with-system-pixman) pixman="system"
;;
--without-system-pixman) pixman="internal"
;;
--without-pixman) pixman="none"
;;
--disable-sdl) sdl="no"
;;
--enable-sdl) sdl="yes"
;;
--with-sdlabi=*) sdlabi="$optarg"
;;
--disable-qom-cast-debug) qom_cast_debug="no"
;;
--enable-qom-cast-debug) qom_cast_debug="yes"
;;
--disable-virtfs) virtfs="no"
;;
--enable-virtfs) virtfs="yes"
;;
--disable-vnc) vnc="no"
;;
--enable-vnc) vnc="yes"
;;
--oss-lib=*) oss_lib="$optarg"
;;
--audio-drv-list=*) audio_drv_list="$optarg"
;;
--block-drv-rw-whitelist=*|--block-drv-whitelist=*) block_drv_rw_whitelist=$(echo "$optarg" | sed -e 's/,/ /g')
;;
--block-drv-ro-whitelist=*) block_drv_ro_whitelist=$(echo "$optarg" | sed -e 's/,/ /g')
;;
--enable-debug-tcg) debug_tcg="yes"
;;
--disable-debug-tcg) debug_tcg="no"
;;
--enable-debug)
# Enable debugging options that aren't excessively noisy
debug_tcg="yes"
debug="yes"
strip_opt="no"
fortify_source="no"
;;
--enable-sparse) sparse="yes"
;;
--disable-sparse) sparse="no"
;;
--disable-strip) strip_opt="no"
;;
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 23:27:28 +03:00
--disable-vnc-sasl) vnc_sasl="no"
;;
--enable-vnc-sasl) vnc_sasl="yes"
;;
--disable-vnc-jpeg) vnc_jpeg="no"
;;
--enable-vnc-jpeg) vnc_jpeg="yes"
;;
--disable-vnc-png) vnc_png="no"
;;
--enable-vnc-png) vnc_png="yes"
;;
--disable-slirp) slirp="no"
;;
--disable-vde) vde="no"
;;
--enable-vde) vde="yes"
;;
--disable-netmap) netmap="no"
;;
--enable-netmap) netmap="yes"
;;
--disable-xen) xen="no"
;;
--enable-xen) xen="yes"
;;
--disable-xen-pci-passthrough) xen_pci_passthrough="no"
;;
--enable-xen-pci-passthrough) xen_pci_passthrough="yes"
;;
--disable-xen-pv-domain-build) xen_pv_domain_build="no"
;;
--enable-xen-pv-domain-build) xen_pv_domain_build="yes"
;;
--disable-brlapi) brlapi="no"
;;
--enable-brlapi) brlapi="yes"
;;
--disable-bluez) bluez="no"
;;
--enable-bluez) bluez="yes"
;;
--disable-kvm) kvm="no"
;;
--enable-kvm) kvm="yes"
;;
--disable-tcg-interpreter) tcg_interpreter="no"
;;
--enable-tcg-interpreter) tcg_interpreter="yes"
;;
--disable-cap-ng) cap_ng="no"
;;
--enable-cap-ng) cap_ng="yes"
;;
2010-03-24 12:26:51 +03:00
--disable-spice) spice="no"
;;
--enable-spice) spice="yes"
;;
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 12:24:24 +04:00
--disable-libiscsi) libiscsi="no"
;;
--enable-libiscsi) libiscsi="yes"
;;
--disable-libnfs) libnfs="no"
;;
--enable-libnfs) libnfs="yes"
;;
--enable-profiler) profiler="yes"
;;
--disable-cocoa) cocoa="no"
;;
--enable-cocoa)
cocoa="yes" ;
audio_drv_list="coreaudio $(echo $audio_drv_list | sed s,coreaudio,,g)"
;;
--disable-system) softmmu="no"
;;
--enable-system) softmmu="yes"
;;
--disable-user)
linux_user="no" ;
bsd_user="no" ;
;;
--enable-user) ;;
--disable-linux-user) linux_user="no"
;;
--enable-linux-user) linux_user="yes"
;;
--disable-bsd-user) bsd_user="no"
;;
--enable-bsd-user) bsd_user="yes"
;;
--enable-pie) pie="yes"
;;
--disable-pie) pie="no"
;;
--enable-werror) werror="yes"
;;
--disable-werror) werror="no"
;;
configure: add option to disable -fstack-protector flags The -fstack-protector flag family is useful for ensuring safety and for debugging, but has a performance impact. Here are some boot time comparisons of the various versions of -fstack-protector using qemu-system-arm on an x86_64 host: # -fstack-protector-all Startup finished in 1.810s (kernel) + 12.331s (initrd) + 49.016s (userspace) = 1min 3.159s Startup finished in 1.801s (kernel) + 12.287s (initrd) + 47.925s (userspace) = 1min 2.013s Startup finished in 1.812s (kernel) + 12.302s (initrd) + 47.995s (userspace) = 1min 2.111s # -fstack-protector-strong Startup finished in 1.744s (kernel) + 11.223s (initrd) + 44.688s (userspace) = 57.657s Startup finished in 1.721s (kernel) + 11.222s (initrd) + 44.194s (userspace) = 57.138s Startup finished in 1.693s (kernel) + 11.250s (initrd) + 44.426s (userspace) = 57.370s # -fstack-protector Startup finished in 1.705s (kernel) + 11.409s (initrd) + 43.563s (userspace) = 56.677s Startup finished in 1.877s (kernel) + 11.137s (initrd) + 43.719s (userspace) = 56.734s Startup finished in 1.708s (kernel) + 11.141s (initrd) + 43.628s (userspace) = 56.478s # no stack protector Startup finished in 1.743s (kernel) + 11.190s (initrd) + 43.709s (userspace) = 56.643s Startup finished in 1.763s (kernel) + 11.216s (initrd) + 43.767s (userspace) = 56.747s Startup finished in 1.711s (kernel) + 11.283s (initrd) + 43.878s (userspace) = 56.873s This patch introduces a configure option to disable the stack protector entirely, and conditional stack protector flag selection (in order, based on availability): -fstack-protector-strong, -fstack-protector-all, no stack protector. Signed-off-by: Steven Noonan <snoonan@amazon.com> Cc: Anthony Liguori <aliguori@amazon.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> [Prefer -fstack-protector-all to -fstack-protector, suggested by Laurent Desnogues. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-03-28 20:19:02 +04:00
--enable-stack-protector) stack_protector="yes"
;;
--disable-stack-protector) stack_protector="no"
;;
--disable-curses) curses="no"
;;
--enable-curses) curses="yes"
;;
--disable-curl) curl="no"
;;
--enable-curl) curl="yes"
;;
--disable-fdt) fdt="no"
;;
--enable-fdt) fdt="yes"
;;
--disable-linux-aio) linux_aio="no"
;;
--enable-linux-aio) linux_aio="yes"
;;
--disable-attr) attr="no"
;;
--enable-attr) attr="yes"
;;
--disable-blobs) blobs="no"
;;
--with-pkgversion=*) pkgversion=" ($optarg)"
;;
--with-coroutine=*) coroutine="$optarg"
;;
--disable-coroutine-pool) coroutine_pool="no"
;;
--enable-coroutine-pool) coroutine_pool="yes"
;;
--disable-docs) docs="no"
;;
--enable-docs) docs="yes"
;;
--disable-vhost-net) vhost_net="no"
;;
--enable-vhost-net) vhost_net="yes"
;;
vhost-scsi: new device supporting the tcm_vhost Linux kernel module The WWPN specified in configfs is passed to "-device vhost-scsi-pci". The tgpt field of the SET_ENDPOINT ioctl is obsolete now, so it is not available from the QEMU command-line. Instead, I hardcode it to zero. Changes in Patch-v2: - Add vhost_scsi_get_features() in order to determine feature bits supports by host kernel (mst + nab) - Re-enable usage of DEFINE_VIRTIO_COMMON_FEATURES, and allow EVENT_IDX to be disabled by host in vhost_scsi_get_features() - Drop unused hotplug bit in DEFINE_VHOST_SCSI_PROPERTIES Changes in Patch-v1: - Set event_idx=off by default (nab, thanks asias) - Disable hotplug feature bit for v3.9 tcm_vhost kernel code, need to re-enable in v3.10 (nab) - Update to latest qemu.git/master HEAD Changes in WIP-V3: - Drop ioeventfd vhost_scsi_properties (asias, thanks stefanha) - Add CONFIG_VHOST_SCSI (asias, thanks stefanha) - Add hotplug feature bit Changes in WIP-V2: - Add backend guest masking support (nab) - Bump ABI_VERSION to 1 (nab) - Set up set_guest_notifiers (asias) - Set up vs->dev.vq_index (asias) - Drop vs->vs.vdev.{set,clear}_vhost_endpoint (asias) - Drop VIRTIO_CONFIG_S_DRIVER check in vhost_scsi_set_status (asias) Howto: Use the latest seabios, at least commit b44a7be17b git clone git://git.seabios.org/seabios.git make cp out/bios.bin /usr/share/qemu/bios.bin qemu -device vhost-scsi-pci,wwpn=naa.6001405bd4e8476d,event_idx=off ... Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Asias He <asias@redhat.com> [ Rebase on top of VirtIOSCSICommon patch, fix bugs in feature negotiation and irqfd masking - Paolo ] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-29 05:08:16 +04:00
--disable-vhost-scsi) vhost_scsi="no"
;;
--enable-vhost-scsi) vhost_scsi="yes"
;;
--disable-vhost-vsock) vhost_vsock="no"
;;
--enable-vhost-vsock) vhost_vsock="yes"
;;
--disable-opengl) opengl="no"
;;
--enable-opengl) opengl="yes"
;;
--disable-rbd) rbd="no"
;;
--enable-rbd) rbd="yes"
;;
--disable-xfsctl) xfs="no"
;;
--enable-xfsctl) xfs="yes"
;;
--disable-smartcard) smartcard="no"
libcacard: initial commit libcacard emulates a Common Access Card (CAC) which is a standard for smartcards. It is used by the emulated ccid card introduced in a following patch. Docs are available in docs/libcacard.txt Signed-off-by: Alon Levy <alevy@redhat.com> --- changes from v24->v25: * Fix out of tree builds. * Fix build with linux-user targets. changes from v23->v24: (Jes Sorensen review 2) * Makefile.target: use obj-$(CONFIG_*) += * remove unrequired includes, include qemu-common before qemu-thread * required adding #define NO_NSPR_10_SUPPORT (harmless) changes from v22->v23: * configure fixes: (reported by Stefan Hajnoczi) * test a = b, not a == b (second isn't portable) * quote $source_path in case it contains spaces - this doesn't really help since there are many other places that need similar fixes, not introduced by this patch. changes from v21->v22: * fix configure to not link libcacard if nss not found (reported by Stefan Hajnoczi) * fix vscclient linkage with simpletrace backend (reported by Stefan Hajnoczi) * card_7816.c: add missing break in ERROR_DATA_NOT_FOUND (reported by William van de Velde) changes from v20->v21: (Jes Sorensen review) * use qemu infrastructure: qemu-thread, qemu-common (qemu_malloc and qemu_free), error_report * assert instead of ASSERT * cosmetic fixes * use strpbrk and isspace * add --disable-nss --enable-nss here, instead of in the final patch. * split vscclient, passthru and docs to following patches. changes from v19->v20: * checkpatch.pl changes from v15->v16: Build: * don't erase self with distclean * fix make clean after make distclean * Makefile: make vscclient link quiet Behavioral: * vcard_emul_nss: load coolkey in more situations * vscclient: * use hton,ntoh * send init on connect, only start vevent thread on response * read payload after header check, before type switch * remove Reconnect * update for vscard_common changes, empty Flush implementation Style/Whitespace: * fix wrong variable usage * remove unused variable * use only C style comments * add copyright header * fix tabulation Signed-off-by: Alon Levy <alevy@redhat.com> libcacard: fix out of tree builds
2010-11-28 17:36:38 +03:00
;;
--enable-smartcard) smartcard="yes"
libcacard: initial commit libcacard emulates a Common Access Card (CAC) which is a standard for smartcards. It is used by the emulated ccid card introduced in a following patch. Docs are available in docs/libcacard.txt Signed-off-by: Alon Levy <alevy@redhat.com> --- changes from v24->v25: * Fix out of tree builds. * Fix build with linux-user targets. changes from v23->v24: (Jes Sorensen review 2) * Makefile.target: use obj-$(CONFIG_*) += * remove unrequired includes, include qemu-common before qemu-thread * required adding #define NO_NSPR_10_SUPPORT (harmless) changes from v22->v23: * configure fixes: (reported by Stefan Hajnoczi) * test a = b, not a == b (second isn't portable) * quote $source_path in case it contains spaces - this doesn't really help since there are many other places that need similar fixes, not introduced by this patch. changes from v21->v22: * fix configure to not link libcacard if nss not found (reported by Stefan Hajnoczi) * fix vscclient linkage with simpletrace backend (reported by Stefan Hajnoczi) * card_7816.c: add missing break in ERROR_DATA_NOT_FOUND (reported by William van de Velde) changes from v20->v21: (Jes Sorensen review) * use qemu infrastructure: qemu-thread, qemu-common (qemu_malloc and qemu_free), error_report * assert instead of ASSERT * cosmetic fixes * use strpbrk and isspace * add --disable-nss --enable-nss here, instead of in the final patch. * split vscclient, passthru and docs to following patches. changes from v19->v20: * checkpatch.pl changes from v15->v16: Build: * don't erase self with distclean * fix make clean after make distclean * Makefile: make vscclient link quiet Behavioral: * vcard_emul_nss: load coolkey in more situations * vscclient: * use hton,ntoh * send init on connect, only start vevent thread on response * read payload after header check, before type switch * remove Reconnect * update for vscard_common changes, empty Flush implementation Style/Whitespace: * fix wrong variable usage * remove unused variable * use only C style comments * add copyright header * fix tabulation Signed-off-by: Alon Levy <alevy@redhat.com> libcacard: fix out of tree builds
2010-11-28 17:36:38 +03:00
;;
--disable-libusb) libusb="no"
;;
--enable-libusb) libusb="yes"
;;
--disable-usb-redir) usb_redir="no"
;;
--enable-usb-redir) usb_redir="yes"
;;
--disable-zlib-test) zlib="no"
;;
--disable-lzo) lzo="no"
;;
--enable-lzo) lzo="yes"
;;
--disable-snappy) snappy="no"
;;
--enable-snappy) snappy="yes"
;;
--disable-bzip2) bzip2="no"
;;
--enable-bzip2) bzip2="yes"
;;
--enable-guest-agent) guest_agent="yes"
;;
--disable-guest-agent) guest_agent="no"
;;
--enable-guest-agent-msi) guest_agent_msi="yes"
;;
--disable-guest-agent-msi) guest_agent_msi="no"
;;
--with-vss-sdk) vss_win32_sdk=""
;;
--with-vss-sdk=*) vss_win32_sdk="$optarg"
;;
--without-vss-sdk) vss_win32_sdk="no"
;;
--with-win-sdk) win_sdk=""
;;
--with-win-sdk=*) win_sdk="$optarg"
;;
--without-win-sdk) win_sdk="no"
;;
--enable-tools) want_tools="yes"
;;
--disable-tools) want_tools="no"
;;
--enable-seccomp) seccomp="yes"
;;
--disable-seccomp) seccomp="no"
;;
--disable-glusterfs) glusterfs="no"
;;
--enable-glusterfs) glusterfs="yes"
;;
--disable-archipelago) archipelago="no"
;;
--enable-archipelago) archipelago="yes"
;;
--disable-virtio-blk-data-plane|--enable-virtio-blk-data-plane)
echo "$0: $opt is obsolete, virtio-blk data-plane is always on" >&2
;;
--enable-vhdx|--disable-vhdx)
echo "$0: $opt is obsolete, VHDX driver is always built" >&2
;;
--enable-uuid|--disable-uuid)
echo "$0: $opt is obsolete, UUID support is always built" >&2
;;
--disable-gtk) gtk="no"
;;
--enable-gtk) gtk="yes"
;;
--tls-priority=*) tls_priority="$optarg"
;;
--disable-gnutls) gnutls="no"
;;
--enable-gnutls) gnutls="yes"
;;
--disable-nettle) nettle="no"
;;
--enable-nettle) nettle="yes"
;;
--disable-gcrypt) gcrypt="no"
;;
--enable-gcrypt) gcrypt="yes"
;;
--enable-rdma) rdma="yes"
;;
--disable-rdma) rdma="no"
;;
--with-gtkabi=*) gtkabi="$optarg"
;;
--disable-vte) vte="no"
;;
--enable-vte) vte="yes"
;;
--disable-virglrenderer) virglrenderer="no"
;;
--enable-virglrenderer) virglrenderer="yes"
;;
--disable-tpm) tpm="no"
;;
--enable-tpm) tpm="yes"
;;
--disable-libssh2) libssh2="no"
;;
--enable-libssh2) libssh2="yes"
;;
--disable-numa) numa="no"
;;
--enable-numa) numa="yes"
;;
--disable-tcmalloc) tcmalloc="no"
;;
--enable-tcmalloc) tcmalloc="yes"
;;
configure: Add support for jemalloc This adds "--enable-jemalloc" and "--disable-jemalloc" to allow linking to jemalloc memory allocator. We have already tcmalloc support, but it seem to not working well with a lot of iothreads/disks. The main problem is that tcmalloc use a shared thread cache of 16MB by default. With more threads, this cache is shared, and some bad garbage collections can occur if the cache is too low. It's possible to tcmalloc cache increase it with a env var: TCMALLOC_MAX_TOTAL_THREAD_CACHE_BYTES=256MB With default 16MB, performances are really bad with more than 2 disks. Increasing to 256MB, it's helping but still have problem with 16 disks/iothreads. Jemalloc don't have performance problem with default configuration. Here the benchmark results in iops of 1 qemu vm randread 4K iodepth=32, with rbd block backend (librbd is doing a lot of memory allocation), 1 iothread by disk glibc malloc ------------ 1 disk 29052 2 disks 55878 4 disks 127899 8 disks 240566 15 disks 269976 jemalloc -------- 1 disk 41278 2 disks 75781 4 disks 195351 8 disks 294241 15 disks 298199 tcmalloc 2.2.1 default 16M cache -------------------------------- 1 disk 37911 2 disks 67698 4 disks 41076 8 disks 43312 15 disks 37569 tcmalloc : 256M cache --------------------------- 1 disk 33914 2 disks 58839 4 disks 148205 8 disks 213298 15 disks 218383 Signed-off-by: Alexandre Derumier <aderumier@odiso.com> Message-Id: <1434711418-20429-1-git-send-email-aderumier@odiso.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-19 13:56:58 +03:00
--disable-jemalloc) jemalloc="no"
;;
--enable-jemalloc) jemalloc="yes"
;;
--disable-replication) replication="no"
;;
--enable-replication) replication="yes"
;;
*)
echo "ERROR: unknown option $opt"
echo "Try '$0 --help' for more information"
exit 1
;;
esac
done
if ! has $python; then
error_exit "Python not found. Use --python=/path/to/python"
fi
# Note that if the Python conditional here evaluates True we will exit
# with status 1 which is a shell 'false' value.
if ! $python -c 'import sys; sys.exit(sys.version_info < (2,6) or sys.version_info >= (3,))'; then
error_exit "Cannot use '$python', Python 2.6 or later is required." \
"Note that Python 3 or later is not yet supported." \
"Use --python=/path/to/python to specify a supported Python."
fi
# Suppress writing compiled files
python="$python -B"
case "$cpu" in
ppc)
CPU_CFLAGS="-m32"
LDFLAGS="-m32 $LDFLAGS"
;;
ppc64)
CPU_CFLAGS="-m64"
LDFLAGS="-m64 $LDFLAGS"
;;
sparc)
LDFLAGS="-m32 $LDFLAGS"
CPU_CFLAGS="-m32 -mcpu=ultrasparc"
;;
sparc64)
LDFLAGS="-m64 $LDFLAGS"
CPU_CFLAGS="-m64 -mcpu=ultrasparc"
;;
s390)
CPU_CFLAGS="-m31"
LDFLAGS="-m31 $LDFLAGS"
;;
s390x)
CPU_CFLAGS="-m64"
LDFLAGS="-m64 $LDFLAGS"
;;
i386)
CPU_CFLAGS="-m32"
LDFLAGS="-m32 $LDFLAGS"
cc_i386='$(CC) -m32'
;;
x86_64)
CPU_CFLAGS="-m64"
LDFLAGS="-m64 $LDFLAGS"
cc_i386='$(CC) -m32'
;;
x32)
CPU_CFLAGS="-mx32"
LDFLAGS="-mx32 $LDFLAGS"
cc_i386='$(CC) -m32'
;;
# No special flags required for other host CPUs
esac
QEMU_CFLAGS="$CPU_CFLAGS $QEMU_CFLAGS"
EXTRA_CFLAGS="$CPU_CFLAGS $EXTRA_CFLAGS"
# For user-mode emulation the host arch has to be one we explicitly
# support, even if we're using TCI.
if [ "$ARCH" = "unknown" ]; then
bsd_user="no"
linux_user="no"
fi
default_target_list=""
mak_wilds=""
if [ "$softmmu" = "yes" ]; then
mak_wilds="${mak_wilds} $source_path/default-configs/*-softmmu.mak"
fi
if [ "$linux_user" = "yes" ]; then
mak_wilds="${mak_wilds} $source_path/default-configs/*-linux-user.mak"
fi
if [ "$bsd_user" = "yes" ]; then
mak_wilds="${mak_wilds} $source_path/default-configs/*-bsd-user.mak"
fi
for config in $mak_wilds; do
default_target_list="${default_target_list} $(basename "$config" .mak)"
done
if test x"$show_help" = x"yes" ; then
cat << EOF
Usage: configure [options]
Options: [defaults in brackets after descriptions]
Standard options:
--help print this message
--prefix=PREFIX install in PREFIX [$prefix]
--interp-prefix=PREFIX where to find shared libraries, etc.
use %M for cpu name [$interp_prefix]
--target-list=LIST set target list (default: build everything)
$(echo Available targets: $default_target_list | \
fold -s -w 53 | sed -e 's/^/ /')
Advanced options (experts only):
--source-path=PATH path of source code [$source_path]
--cross-prefix=PREFIX use PREFIX for compile tools [$cross_prefix]
--cc=CC use C compiler CC [$cc]
--iasl=IASL use ACPI compiler IASL [$iasl]
--host-cc=CC use C compiler CC [$host_cc] for code run at
build time
--cxx=CXX use C++ compiler CXX [$cxx]
--objcc=OBJCC use Objective-C compiler OBJCC [$objcc]
--extra-cflags=CFLAGS append extra C compiler flags QEMU_CFLAGS
--extra-ldflags=LDFLAGS append extra linker flags LDFLAGS
--make=MAKE use specified make [$make]
--install=INSTALL use specified install [$install]
--python=PYTHON use specified python [$python]
--smbd=SMBD use specified smbd [$smbd]
--static enable static build [$static]
--mandir=PATH install man pages in PATH
--datadir=PATH install firmware in PATH$confsuffix
--docdir=PATH install documentation in PATH$confsuffix
--bindir=PATH install binaries in PATH
--libdir=PATH install libraries in PATH
--sysconfdir=PATH install config in PATH$confsuffix
--localstatedir=PATH install local state in PATH (set at runtime on win32)
--with-confsuffix=SUFFIX suffix for QEMU data inside datadir/libdir/sysconfdir [$confsuffix]
--enable-debug enable common debug build options
--disable-strip disable stripping binaries
--disable-werror disable compilation abort on warning
configure: add option to disable -fstack-protector flags The -fstack-protector flag family is useful for ensuring safety and for debugging, but has a performance impact. Here are some boot time comparisons of the various versions of -fstack-protector using qemu-system-arm on an x86_64 host: # -fstack-protector-all Startup finished in 1.810s (kernel) + 12.331s (initrd) + 49.016s (userspace) = 1min 3.159s Startup finished in 1.801s (kernel) + 12.287s (initrd) + 47.925s (userspace) = 1min 2.013s Startup finished in 1.812s (kernel) + 12.302s (initrd) + 47.995s (userspace) = 1min 2.111s # -fstack-protector-strong Startup finished in 1.744s (kernel) + 11.223s (initrd) + 44.688s (userspace) = 57.657s Startup finished in 1.721s (kernel) + 11.222s (initrd) + 44.194s (userspace) = 57.138s Startup finished in 1.693s (kernel) + 11.250s (initrd) + 44.426s (userspace) = 57.370s # -fstack-protector Startup finished in 1.705s (kernel) + 11.409s (initrd) + 43.563s (userspace) = 56.677s Startup finished in 1.877s (kernel) + 11.137s (initrd) + 43.719s (userspace) = 56.734s Startup finished in 1.708s (kernel) + 11.141s (initrd) + 43.628s (userspace) = 56.478s # no stack protector Startup finished in 1.743s (kernel) + 11.190s (initrd) + 43.709s (userspace) = 56.643s Startup finished in 1.763s (kernel) + 11.216s (initrd) + 43.767s (userspace) = 56.747s Startup finished in 1.711s (kernel) + 11.283s (initrd) + 43.878s (userspace) = 56.873s This patch introduces a configure option to disable the stack protector entirely, and conditional stack protector flag selection (in order, based on availability): -fstack-protector-strong, -fstack-protector-all, no stack protector. Signed-off-by: Steven Noonan <snoonan@amazon.com> Cc: Anthony Liguori <aliguori@amazon.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> [Prefer -fstack-protector-all to -fstack-protector, suggested by Laurent Desnogues. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-03-28 20:19:02 +04:00
--disable-stack-protector disable compiler-provided stack protection
--audio-drv-list=LIST set audio drivers list:
Available drivers: $audio_possible_drivers
--block-drv-whitelist=L Same as --block-drv-rw-whitelist=L
--block-drv-rw-whitelist=L
set block driver read-write whitelist
(affects only QEMU, not qemu-img)
--block-drv-ro-whitelist=L
set block driver read-only whitelist
(affects only QEMU, not qemu-img)
--enable-trace-backends=B Set trace backend
Available backends: $($python $source_path/scripts/tracetool.py --list-backends)
--with-trace-file=NAME Full PATH,NAME of file to store traces
Default:trace-<pid>
--disable-slirp disable SLIRP userspace network connectivity
--enable-tcg-interpreter enable TCG with bytecode interpreter (TCI)
--oss-lib path to OSS library
--cpu=CPU Build for host CPU [$cpu]
--with-coroutine=BACKEND coroutine backend. Supported options:
gthread, ucontext, sigaltstack, windows
--enable-gcov enable test coverage analysis with gcov
--gcov=GCOV use specified gcov [$gcov_tool]
--disable-blobs disable installing provided firmware blobs
--with-vss-sdk=SDK-path enable Windows VSS support in QEMU Guest Agent
--with-win-sdk=SDK-path path to Windows Platform SDK (to build VSS .tlb)
--tls-priority default TLS protocol/cipher priority string
Optional features, enabled with --enable-FEATURE and
disabled with --disable-FEATURE, default is enabled if available:
system all system emulation targets
user supported user emulation targets
linux-user all linux usermode emulation targets
bsd-user all BSD usermode emulation targets
docs build documentation
guest-agent build the QEMU Guest Agent
guest-agent-msi build guest agent Windows MSI installation package
pie Position Independent Executables
modules modules support
debug-tcg TCG debugging (default is disabled)
debug-info debugging information
sparse sparse checker
gnutls GNUTLS cryptography support
nettle nettle cryptography support
gcrypt libgcrypt cryptography support
sdl SDL UI
--with-sdlabi select preferred SDL ABI 1.2 or 2.0
gtk gtk UI
--with-gtkabi select preferred GTK ABI 2.0 or 3.0
vte vte support for the gtk UI
curses curses UI
vnc VNC UI support
vnc-sasl SASL encryption for VNC server
vnc-jpeg JPEG lossy compression for VNC server
vnc-png PNG compression for VNC server
cocoa Cocoa UI (Mac OS X only)
virtfs VirtFS
xen xen backend driver support
xen-pci-passthrough
brlapi BrlAPI (Braile)
curl curl connectivity
fdt fdt device tree
bluez bluez stack connectivity
kvm KVM acceleration support
rdma RDMA-based migration support
vde support for vde network
netmap support for netmap network
linux-aio Linux AIO support
cap-ng libcap-ng support
attr attr and xattr support
vhost-net vhost-net acceleration support
spice spice
rbd rados block device (rbd)
libiscsi iscsi support
libnfs nfs support
smartcard smartcard support (libcacard)
libusb libusb (for usb passthrough)
usb-redir usb network redirection support
lzo support of lzo compression library
snappy support of snappy compression library
bzip2 support of bzip2 compression library
(for reading bzip2-compressed dmg images)
seccomp seccomp support
coroutine-pool coroutine freelist (better performance)
glusterfs GlusterFS backend
archipelago Archipelago backend
tpm TPM support
libssh2 ssh block device support
numa libnuma support
tcmalloc tcmalloc support
configure: Add support for jemalloc This adds "--enable-jemalloc" and "--disable-jemalloc" to allow linking to jemalloc memory allocator. We have already tcmalloc support, but it seem to not working well with a lot of iothreads/disks. The main problem is that tcmalloc use a shared thread cache of 16MB by default. With more threads, this cache is shared, and some bad garbage collections can occur if the cache is too low. It's possible to tcmalloc cache increase it with a env var: TCMALLOC_MAX_TOTAL_THREAD_CACHE_BYTES=256MB With default 16MB, performances are really bad with more than 2 disks. Increasing to 256MB, it's helping but still have problem with 16 disks/iothreads. Jemalloc don't have performance problem with default configuration. Here the benchmark results in iops of 1 qemu vm randread 4K iodepth=32, with rbd block backend (librbd is doing a lot of memory allocation), 1 iothread by disk glibc malloc ------------ 1 disk 29052 2 disks 55878 4 disks 127899 8 disks 240566 15 disks 269976 jemalloc -------- 1 disk 41278 2 disks 75781 4 disks 195351 8 disks 294241 15 disks 298199 tcmalloc 2.2.1 default 16M cache -------------------------------- 1 disk 37911 2 disks 67698 4 disks 41076 8 disks 43312 15 disks 37569 tcmalloc : 256M cache --------------------------- 1 disk 33914 2 disks 58839 4 disks 148205 8 disks 213298 15 disks 218383 Signed-off-by: Alexandre Derumier <aderumier@odiso.com> Message-Id: <1434711418-20429-1-git-send-email-aderumier@odiso.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-19 13:56:58 +03:00
jemalloc jemalloc support
replication replication support
NOTE: The object files are built at the place where configure is launched
EOF
exit 0
fi
# Now we have handled --enable-tcg-interpreter and know we're not just
# printing the help message, bail out if the host CPU isn't supported.
if test "$ARCH" = "unknown"; then
if test "$tcg_interpreter" = "yes" ; then
echo "Unsupported CPU = $cpu, will use TCG with TCI (experimental)"
else
error_exit "Unsupported CPU = $cpu, try --enable-tcg-interpreter"
fi
fi
configure: Make C++ test work with --enable-werror gcc's C++ compiler complains about being passed some -W options which make sense for C but not for C++. This means we mustn't try a C++ compile with QEMU_CFLAGS, but only with a filtered version that removes the offending options. This filtering was already being done for uses of C++ in the build itself, but was omitted for the "does C++ work?" configure test. This only showed up when doing builds which explicitly enabled -Werror with --enable-werror, because the "do the compilers work" tests were mistakenly placed above the "default werror based on whether compiling from git" code. Another error in this category is that clang warns if you ask it to compile C++ code from a file named "foo.c". Further, because we were running do_cc in a subshell in the condition part of an "if", the error_exit inside do_compiler wouldn't terminate configure and we would plunge on regardless. Fix this complex of errors: 1. Move the default-werror code up so that there are no invocations of compile_object and friends between it and the point where we set $werror explicitly based on the --enable-werror command line option. 2. Provide a mechanism for filtering QEMU_CFLAGS to create QEMU_CXXFLAGS, and use it for the test we run here. 3. Provide a do_cxx function to run a test with the C++ compiler rather than doing cute tricks with subshells and do_cc. 4. Use a new temporary file TMPCXX for the C++ program fragment. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1393352869-22257-1-git-send-email-peter.maydell@linaro.org Tested-by: Andreas Färber <afaerber@suse.de>
2014-02-25 22:27:49 +04:00
# Consult white-list to determine whether to enable werror
# by default. Only enable by default for git builds
if test -z "$werror" ; then
if test -d "$source_path/.git" -a \
\( "$linux" = "yes" -o "$mingw32" = "yes" \) ; then
configure: Make C++ test work with --enable-werror gcc's C++ compiler complains about being passed some -W options which make sense for C but not for C++. This means we mustn't try a C++ compile with QEMU_CFLAGS, but only with a filtered version that removes the offending options. This filtering was already being done for uses of C++ in the build itself, but was omitted for the "does C++ work?" configure test. This only showed up when doing builds which explicitly enabled -Werror with --enable-werror, because the "do the compilers work" tests were mistakenly placed above the "default werror based on whether compiling from git" code. Another error in this category is that clang warns if you ask it to compile C++ code from a file named "foo.c". Further, because we were running do_cc in a subshell in the condition part of an "if", the error_exit inside do_compiler wouldn't terminate configure and we would plunge on regardless. Fix this complex of errors: 1. Move the default-werror code up so that there are no invocations of compile_object and friends between it and the point where we set $werror explicitly based on the --enable-werror command line option. 2. Provide a mechanism for filtering QEMU_CFLAGS to create QEMU_CXXFLAGS, and use it for the test we run here. 3. Provide a do_cxx function to run a test with the C++ compiler rather than doing cute tricks with subshells and do_cc. 4. Use a new temporary file TMPCXX for the C++ program fragment. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1393352869-22257-1-git-send-email-peter.maydell@linaro.org Tested-by: Andreas Färber <afaerber@suse.de>
2014-02-25 22:27:49 +04:00
werror="yes"
else
werror="no"
fi
fi
# check that the C compiler works.
write_c_skeleton;
if compile_object ; then
: C compiler works ok
else
error_exit "\"$cc\" either does not exist or does not work"
fi
if ! compile_prog ; then
error_exit "\"$cc\" cannot build an executable (is your linker broken?)"
fi
# Check that the C++ compiler exists and works with the C compiler
if has $cxx; then
cat > $TMPC <<EOF
int c_function(void);
int main(void) { return c_function(); }
EOF
compile_object
configure: Make C++ test work with --enable-werror gcc's C++ compiler complains about being passed some -W options which make sense for C but not for C++. This means we mustn't try a C++ compile with QEMU_CFLAGS, but only with a filtered version that removes the offending options. This filtering was already being done for uses of C++ in the build itself, but was omitted for the "does C++ work?" configure test. This only showed up when doing builds which explicitly enabled -Werror with --enable-werror, because the "do the compilers work" tests were mistakenly placed above the "default werror based on whether compiling from git" code. Another error in this category is that clang warns if you ask it to compile C++ code from a file named "foo.c". Further, because we were running do_cc in a subshell in the condition part of an "if", the error_exit inside do_compiler wouldn't terminate configure and we would plunge on regardless. Fix this complex of errors: 1. Move the default-werror code up so that there are no invocations of compile_object and friends between it and the point where we set $werror explicitly based on the --enable-werror command line option. 2. Provide a mechanism for filtering QEMU_CFLAGS to create QEMU_CXXFLAGS, and use it for the test we run here. 3. Provide a do_cxx function to run a test with the C++ compiler rather than doing cute tricks with subshells and do_cc. 4. Use a new temporary file TMPCXX for the C++ program fragment. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1393352869-22257-1-git-send-email-peter.maydell@linaro.org Tested-by: Andreas Färber <afaerber@suse.de>
2014-02-25 22:27:49 +04:00
cat > $TMPCXX <<EOF
extern "C" {
int c_function(void);
}
int c_function(void) { return 42; }
EOF
configure: Make C++ test work with --enable-werror gcc's C++ compiler complains about being passed some -W options which make sense for C but not for C++. This means we mustn't try a C++ compile with QEMU_CFLAGS, but only with a filtered version that removes the offending options. This filtering was already being done for uses of C++ in the build itself, but was omitted for the "does C++ work?" configure test. This only showed up when doing builds which explicitly enabled -Werror with --enable-werror, because the "do the compilers work" tests were mistakenly placed above the "default werror based on whether compiling from git" code. Another error in this category is that clang warns if you ask it to compile C++ code from a file named "foo.c". Further, because we were running do_cc in a subshell in the condition part of an "if", the error_exit inside do_compiler wouldn't terminate configure and we would plunge on regardless. Fix this complex of errors: 1. Move the default-werror code up so that there are no invocations of compile_object and friends between it and the point where we set $werror explicitly based on the --enable-werror command line option. 2. Provide a mechanism for filtering QEMU_CFLAGS to create QEMU_CXXFLAGS, and use it for the test we run here. 3. Provide a do_cxx function to run a test with the C++ compiler rather than doing cute tricks with subshells and do_cc. 4. Use a new temporary file TMPCXX for the C++ program fragment. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1393352869-22257-1-git-send-email-peter.maydell@linaro.org Tested-by: Andreas Färber <afaerber@suse.de>
2014-02-25 22:27:49 +04:00
update_cxxflags
if do_cxx $QEMU_CXXFLAGS -o $TMPE $TMPCXX $TMPO $LDFLAGS; then
# C++ compiler $cxx works ok with C compiler $cc
:
else
echo "C++ compiler $cxx does not work with C compiler $cc"
echo "Disabling C++ specific optional code"
cxx=
fi
else
echo "No C++ compiler available; disabling C++ specific optional code"
cxx=
fi
gcc_flags="-Wold-style-declaration -Wold-style-definition -Wtype-limits"
gcc_flags="-Wformat-security -Wformat-y2k -Winit-self -Wignored-qualifiers $gcc_flags"
gcc_flags="-Wmissing-include-dirs -Wempty-body -Wnested-externs $gcc_flags"
gcc_flags="-Wendif-labels -Wno-shift-negative-value $gcc_flags"
gcc_flags="-Wno-initializer-overrides $gcc_flags"
gcc_flags="-Wno-string-plus-int $gcc_flags"
# Note that we do not add -Werror to gcc_flags here, because that would
# enable it for all configure tests. If a configure test failed due
# to -Werror this would just silently disable some features,
# so it's too error prone.
cc_has_warning_flag() {
write_c_skeleton;
# Use the positive sense of the flag when testing for -Wno-wombat
# support (gcc will happily accept the -Wno- form of unknown
# warning options).
optflag="$(echo $1 | sed -e 's/^-Wno-/-W/')"
compile_prog "-Werror $optflag" ""
}
for flag in $gcc_flags; do
if cc_has_warning_flag $flag ; then
QEMU_CFLAGS="$QEMU_CFLAGS $flag"
fi
done
if test "$stack_protector" != "no"; then
cat > $TMPC << EOF
int main(int argc, char *argv[])
{
char arr[64], *p = arr, *c = argv[0];
while (*c) {
*p++ = *c++;
}
return 0;
}
EOF
configure: add option to disable -fstack-protector flags The -fstack-protector flag family is useful for ensuring safety and for debugging, but has a performance impact. Here are some boot time comparisons of the various versions of -fstack-protector using qemu-system-arm on an x86_64 host: # -fstack-protector-all Startup finished in 1.810s (kernel) + 12.331s (initrd) + 49.016s (userspace) = 1min 3.159s Startup finished in 1.801s (kernel) + 12.287s (initrd) + 47.925s (userspace) = 1min 2.013s Startup finished in 1.812s (kernel) + 12.302s (initrd) + 47.995s (userspace) = 1min 2.111s # -fstack-protector-strong Startup finished in 1.744s (kernel) + 11.223s (initrd) + 44.688s (userspace) = 57.657s Startup finished in 1.721s (kernel) + 11.222s (initrd) + 44.194s (userspace) = 57.138s Startup finished in 1.693s (kernel) + 11.250s (initrd) + 44.426s (userspace) = 57.370s # -fstack-protector Startup finished in 1.705s (kernel) + 11.409s (initrd) + 43.563s (userspace) = 56.677s Startup finished in 1.877s (kernel) + 11.137s (initrd) + 43.719s (userspace) = 56.734s Startup finished in 1.708s (kernel) + 11.141s (initrd) + 43.628s (userspace) = 56.478s # no stack protector Startup finished in 1.743s (kernel) + 11.190s (initrd) + 43.709s (userspace) = 56.643s Startup finished in 1.763s (kernel) + 11.216s (initrd) + 43.767s (userspace) = 56.747s Startup finished in 1.711s (kernel) + 11.283s (initrd) + 43.878s (userspace) = 56.873s This patch introduces a configure option to disable the stack protector entirely, and conditional stack protector flag selection (in order, based on availability): -fstack-protector-strong, -fstack-protector-all, no stack protector. Signed-off-by: Steven Noonan <snoonan@amazon.com> Cc: Anthony Liguori <aliguori@amazon.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> [Prefer -fstack-protector-all to -fstack-protector, suggested by Laurent Desnogues. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-03-28 20:19:02 +04:00
gcc_flags="-fstack-protector-strong -fstack-protector-all"
sp_on=0
configure: add option to disable -fstack-protector flags The -fstack-protector flag family is useful for ensuring safety and for debugging, but has a performance impact. Here are some boot time comparisons of the various versions of -fstack-protector using qemu-system-arm on an x86_64 host: # -fstack-protector-all Startup finished in 1.810s (kernel) + 12.331s (initrd) + 49.016s (userspace) = 1min 3.159s Startup finished in 1.801s (kernel) + 12.287s (initrd) + 47.925s (userspace) = 1min 2.013s Startup finished in 1.812s (kernel) + 12.302s (initrd) + 47.995s (userspace) = 1min 2.111s # -fstack-protector-strong Startup finished in 1.744s (kernel) + 11.223s (initrd) + 44.688s (userspace) = 57.657s Startup finished in 1.721s (kernel) + 11.222s (initrd) + 44.194s (userspace) = 57.138s Startup finished in 1.693s (kernel) + 11.250s (initrd) + 44.426s (userspace) = 57.370s # -fstack-protector Startup finished in 1.705s (kernel) + 11.409s (initrd) + 43.563s (userspace) = 56.677s Startup finished in 1.877s (kernel) + 11.137s (initrd) + 43.719s (userspace) = 56.734s Startup finished in 1.708s (kernel) + 11.141s (initrd) + 43.628s (userspace) = 56.478s # no stack protector Startup finished in 1.743s (kernel) + 11.190s (initrd) + 43.709s (userspace) = 56.643s Startup finished in 1.763s (kernel) + 11.216s (initrd) + 43.767s (userspace) = 56.747s Startup finished in 1.711s (kernel) + 11.283s (initrd) + 43.878s (userspace) = 56.873s This patch introduces a configure option to disable the stack protector entirely, and conditional stack protector flag selection (in order, based on availability): -fstack-protector-strong, -fstack-protector-all, no stack protector. Signed-off-by: Steven Noonan <snoonan@amazon.com> Cc: Anthony Liguori <aliguori@amazon.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> [Prefer -fstack-protector-all to -fstack-protector, suggested by Laurent Desnogues. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-03-28 20:19:02 +04:00
for flag in $gcc_flags; do
# We need to check both a compile and a link, since some compiler
# setups fail only on a .c->.o compile and some only at link time
if do_cc $QEMU_CFLAGS -Werror $flag -c -o $TMPO $TMPC &&
compile_prog "-Werror $flag" ""; then
configure: add option to disable -fstack-protector flags The -fstack-protector flag family is useful for ensuring safety and for debugging, but has a performance impact. Here are some boot time comparisons of the various versions of -fstack-protector using qemu-system-arm on an x86_64 host: # -fstack-protector-all Startup finished in 1.810s (kernel) + 12.331s (initrd) + 49.016s (userspace) = 1min 3.159s Startup finished in 1.801s (kernel) + 12.287s (initrd) + 47.925s (userspace) = 1min 2.013s Startup finished in 1.812s (kernel) + 12.302s (initrd) + 47.995s (userspace) = 1min 2.111s # -fstack-protector-strong Startup finished in 1.744s (kernel) + 11.223s (initrd) + 44.688s (userspace) = 57.657s Startup finished in 1.721s (kernel) + 11.222s (initrd) + 44.194s (userspace) = 57.138s Startup finished in 1.693s (kernel) + 11.250s (initrd) + 44.426s (userspace) = 57.370s # -fstack-protector Startup finished in 1.705s (kernel) + 11.409s (initrd) + 43.563s (userspace) = 56.677s Startup finished in 1.877s (kernel) + 11.137s (initrd) + 43.719s (userspace) = 56.734s Startup finished in 1.708s (kernel) + 11.141s (initrd) + 43.628s (userspace) = 56.478s # no stack protector Startup finished in 1.743s (kernel) + 11.190s (initrd) + 43.709s (userspace) = 56.643s Startup finished in 1.763s (kernel) + 11.216s (initrd) + 43.767s (userspace) = 56.747s Startup finished in 1.711s (kernel) + 11.283s (initrd) + 43.878s (userspace) = 56.873s This patch introduces a configure option to disable the stack protector entirely, and conditional stack protector flag selection (in order, based on availability): -fstack-protector-strong, -fstack-protector-all, no stack protector. Signed-off-by: Steven Noonan <snoonan@amazon.com> Cc: Anthony Liguori <aliguori@amazon.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> [Prefer -fstack-protector-all to -fstack-protector, suggested by Laurent Desnogues. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-03-28 20:19:02 +04:00
QEMU_CFLAGS="$QEMU_CFLAGS $flag"
sp_on=1
configure: add option to disable -fstack-protector flags The -fstack-protector flag family is useful for ensuring safety and for debugging, but has a performance impact. Here are some boot time comparisons of the various versions of -fstack-protector using qemu-system-arm on an x86_64 host: # -fstack-protector-all Startup finished in 1.810s (kernel) + 12.331s (initrd) + 49.016s (userspace) = 1min 3.159s Startup finished in 1.801s (kernel) + 12.287s (initrd) + 47.925s (userspace) = 1min 2.013s Startup finished in 1.812s (kernel) + 12.302s (initrd) + 47.995s (userspace) = 1min 2.111s # -fstack-protector-strong Startup finished in 1.744s (kernel) + 11.223s (initrd) + 44.688s (userspace) = 57.657s Startup finished in 1.721s (kernel) + 11.222s (initrd) + 44.194s (userspace) = 57.138s Startup finished in 1.693s (kernel) + 11.250s (initrd) + 44.426s (userspace) = 57.370s # -fstack-protector Startup finished in 1.705s (kernel) + 11.409s (initrd) + 43.563s (userspace) = 56.677s Startup finished in 1.877s (kernel) + 11.137s (initrd) + 43.719s (userspace) = 56.734s Startup finished in 1.708s (kernel) + 11.141s (initrd) + 43.628s (userspace) = 56.478s # no stack protector Startup finished in 1.743s (kernel) + 11.190s (initrd) + 43.709s (userspace) = 56.643s Startup finished in 1.763s (kernel) + 11.216s (initrd) + 43.767s (userspace) = 56.747s Startup finished in 1.711s (kernel) + 11.283s (initrd) + 43.878s (userspace) = 56.873s This patch introduces a configure option to disable the stack protector entirely, and conditional stack protector flag selection (in order, based on availability): -fstack-protector-strong, -fstack-protector-all, no stack protector. Signed-off-by: Steven Noonan <snoonan@amazon.com> Cc: Anthony Liguori <aliguori@amazon.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> [Prefer -fstack-protector-all to -fstack-protector, suggested by Laurent Desnogues. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-03-28 20:19:02 +04:00
break
fi
done
if test "$stack_protector" = yes; then
if test $sp_on = 0; then
error_exit "Stack protector not supported"
fi
fi
fi
# Workaround for http://gcc.gnu.org/PR55489. Happens with -fPIE/-fPIC and
# large functions that use global variables. The bug is in all releases of
# GCC, but it became particularly acute in 4.6.x and 4.7.x. It is fixed in
# 4.7.3 and 4.8.0. We should be able to delete this at the end of 2013.
cat > $TMPC << EOF
#if __GNUC__ == 4 && (__GNUC_MINOR__ == 6 || (__GNUC_MINOR__ == 7 && __GNUC_PATCHLEVEL__ <= 2))
int main(void) { return 0; }
#else
#error No bug in this compiler.
#endif
EOF
if compile_prog "-Werror -fno-gcse" "" ; then
TRANSLATE_OPT_CFLAGS=-fno-gcse
fi
if test "$static" = "yes" ; then
if test "$modules" = "yes" ; then
error_exit "static and modules are mutually incompatible"
fi
if test "$pie" = "yes" ; then
error_exit "static and pie are mutually incompatible"
else
pie="no"
fi
fi
# Unconditional check for compiler __thread support
cat > $TMPC << EOF
static __thread int tls_var;
int main(void) { return tls_var; }
EOF
if ! compile_prog "-Werror" "" ; then
error_exit "Your compiler does not support the __thread specifier for " \
"Thread-Local Storage (TLS). Please upgrade to a version that does."
fi
if test "$pie" = ""; then
case "$cpu-$targetos" in
i386-Linux|x86_64-Linux|x32-Linux|i386-OpenBSD|x86_64-OpenBSD)
;;
*)
pie="no"
;;
esac
fi
if test "$pie" != "no" ; then
cat > $TMPC << EOF
#ifdef __linux__
# define THREAD __thread
#else
# define THREAD
#endif
static THREAD int tls_var;
int main(void) { return tls_var; }
EOF
if compile_prog "-fPIE -DPIE" "-pie"; then
QEMU_CFLAGS="-fPIE -DPIE $QEMU_CFLAGS"
LDFLAGS="-pie $LDFLAGS"
pie="yes"
if compile_prog "" "-Wl,-z,relro -Wl,-z,now" ; then
LDFLAGS="-Wl,-z,relro -Wl,-z,now $LDFLAGS"
fi
else
if test "$pie" = "yes"; then
error_exit "PIE not available due to missing toolchain support"
else
echo "Disabling PIE due to missing toolchain support"
pie="no"
fi
fi
if compile_prog "-Werror -fno-pie" "-nopie"; then
CFLAGS_NOPIE="-fno-pie"
LDFLAGS_NOPIE="-nopie"
fi
fi
##########################################
# __sync_fetch_and_and requires at least -march=i486. Many toolchains
# use i686 as default anyway, but for those that don't, an explicit
# specification is necessary
if test "$cpu" = "i386"; then
cat > $TMPC << EOF
static int sfaa(int *ptr)
{
return __sync_fetch_and_and(ptr, 0);
}
int main(void)
{
int val = 42;
val = __sync_val_compare_and_swap(&val, 0, 1);
sfaa(&val);
return val;
}
EOF
if ! compile_prog "" "" ; then
QEMU_CFLAGS="-march=i486 $QEMU_CFLAGS"
fi
fi
#########################################
# Solaris specific configure tool chain decisions
if test "$solaris" = "yes" ; then
if has $install; then
:
else
error_exit "Solaris install program not found. Use --install=/usr/ucb/install or" \
"install fileutils from www.blastwave.org using pkg-get -i fileutils" \
"to get ginstall which is used by default (which lives in /opt/csw/bin)"
fi
if test "$(path_of $install)" = "/usr/sbin/install" ; then
error_exit "Solaris /usr/sbin/install is not an appropriate install program." \
"try ginstall from the GNU fileutils available from www.blastwave.org" \
"using pkg-get -i fileutils, or use --install=/usr/ucb/install"
fi
if has ar; then
:
else
if test -f /usr/ccs/bin/ar ; then
error_exit "No path includes ar" \
"Add /usr/ccs/bin to your path and rerun configure"
fi
error_exit "No path includes ar"
fi
fi
if test -z "${target_list+xxx}" ; then
target_list="$default_target_list"
else
target_list=$(echo "$target_list" | sed -e 's/,/ /g')
fi
# Check that we recognised the target name; this allows a more
# friendly error message than if we let it fall through.
for target in $target_list; do
case " $default_target_list " in
*" $target "*)
;;
*)
error_exit "Unknown target name '$target'"
;;
esac
done
# see if system emulation was really requested
case " $target_list " in
*"-softmmu "*) softmmu=yes
;;
*) softmmu=no
;;
esac
feature_not_found() {
feature=$1
remedy=$2
error_exit "User requested feature $feature" \
"configure was not able to find it." \
"$remedy"
}
# ---
# big/little endian test
cat > $TMPC << EOF
short big_endian[] = { 0x4269, 0x4765, 0x4e64, 0x4961, 0x4e00, 0, };
short little_endian[] = { 0x694c, 0x7454, 0x654c, 0x6e45, 0x6944, 0x6e41, 0, };
extern int foo(short *, short *);
int main(int argc, char *argv[]) {
return foo(big_endian, little_endian);
}
EOF
if compile_object ; then
if grep -q BiGeNdIaN $TMPO ; then
bigendian="yes"
elif grep -q LiTtLeEnDiAn $TMPO ; then
bigendian="no"
else
echo big/little test failed
fi
else
echo big/little test failed
fi
##########################################
# cocoa implies not SDL or GTK
# (the cocoa UI code currently assumes it is always the active UI
# and doesn't interact well with other UI frontend code)
if test "$cocoa" = "yes"; then
if test "$sdl" = "yes"; then
error_exit "Cocoa and SDL UIs cannot both be enabled at once"
fi
if test "$gtk" = "yes"; then
error_exit "Cocoa and GTK UIs cannot both be enabled at once"
fi
gtk=no
sdl=no
fi
##########################################
# L2TPV3 probe
cat > $TMPC <<EOF
#include <sys/socket.h>
#include <linux/ip.h>
int main(void) { return sizeof(struct mmsghdr); }
EOF
if compile_prog "" "" ; then
l2tpv3=yes
else
l2tpv3=no
fi
oslib-win32: only provide localtime_r/gmtime_r if missing The oslib-win32 file currently provides a localtime_r and gmtime_r replacement unconditionally. Some versions of Mingw-w64 would provide crude macros for localtime_r/gmtime_r which QEMU takes care to disable. Latest versions of Mingw-w64 now provide actual functions for localtime_r/gmtime_r, but with a twist that you have to include unistd.h or pthread.h before including time.h. By luck some files in QEMU have such an include order, resulting in compile errors: CC util/osdep.o In file included from include/qemu-common.h:48:0, from util/osdep.c:48: include/sysemu/os-win32.h:77:12: error: redundant redeclaration of 'gmtime_r' [-Werror=redundant-decls] struct tm *gmtime_r(const time_t *timep, struct tm *result); ^ In file included from include/qemu-common.h:35:0, from util/osdep.c:48: /usr/i686-w64-mingw32/sys-root/mingw/include/time.h:272:107: note: previous definition of 'gmtime_r' was here In file included from include/qemu-common.h:48:0, from util/osdep.c:48: include/sysemu/os-win32.h:79:12: error: redundant redeclaration of 'localtime_r' [-Werror=redundant-decls] struct tm *localtime_r(const time_t *timep, struct tm *result); ^ In file included from include/qemu-common.h:35:0, from util/osdep.c:48: /usr/i686-w64-mingw32/sys-root/mingw/include/time.h:269:107: note: previous definition of 'localtime_r' was here This change adds a configure test to see if localtime_r exits, and only enables the QEMU impl if missing. We also re-arrange qemu-common.h try attempt to guarantee that all source files get unistd.h before time.h and thus see the localtime_r/gmtime_r defs. [sw: Use "official" spellings for Mingw-w64, MinGW in comments.] [sw: Terminate sentences with a dot in comments.] Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Denis V. Lunev <den@openvz.org> Signed-off-by: Stefan Weil <sw@weilnetz.de>
2015-09-22 17:13:26 +03:00
##########################################
# MinGW / Mingw-w64 localtime_r/gmtime_r check
if test "$mingw32" = "yes"; then
# Some versions of MinGW / Mingw-w64 lack localtime_r
# and gmtime_r entirely.
#
# Some versions of Mingw-w64 define a macro for
# localtime_r/gmtime_r.
#
# Some versions of Mingw-w64 will define functions
# for localtime_r/gmtime_r, but only if you have
# _POSIX_THREAD_SAFE_FUNCTIONS defined. For fun
# though, unistd.h and pthread.h both define
# that for you.
#
# So this #undef localtime_r and #include <unistd.h>
# are not in fact redundant.
cat > $TMPC << EOF
#include <unistd.h>
#include <time.h>
#undef localtime_r
int main(void) { localtime_r(NULL, NULL); return 0; }
EOF
if compile_prog "" "" ; then
localtime_r="yes"
else
localtime_r="no"
fi
fi
##########################################
# pkg-config probe
if ! has "$pkg_config_exe"; then
error_exit "pkg-config binary '$pkg_config_exe' not found"
fi
##########################################
# NPTL probe
if test "$linux_user" = "yes"; then
cat > $TMPC <<EOF
#include <sched.h>
#include <linux/futex.h>
int main(void) {
#if !defined(CLONE_SETTLS) || !defined(FUTEX_WAIT)
#error bork
#endif
return 0;
}
EOF
if ! compile_object ; then
feature_not_found "nptl" "Install glibc and linux kernel headers."
fi
fi
##########################################
# avx2 optimization requirement check
cat > $TMPC << EOF
#pragma GCC push_options
#pragma GCC target("avx2")
#include <cpuid.h>
#include <immintrin.h>
static int bar(void *a) {
__m256i x = *(__m256i *)a;
return _mm256_testz_si256(x, x);
}
int main(int argc, char *argv[]) { return bar(argv[0]); }
EOF
if compile_object "" ; then
avx2_opt="yes"
fi
#########################################
# zlib check
if test "$zlib" != "no" ; then
cat > $TMPC << EOF
#include <zlib.h>
int main(void) { zlibVersion(); return 0; }
EOF
if compile_prog "" "-lz" ; then
:
else
error_exit "zlib check failed" \
"Make sure to have the zlib libs and headers installed."
fi
fi
LIBS="$LIBS -lz"
##########################################
# lzo check
if test "$lzo" != "no" ; then
cat > $TMPC << EOF
#include <lzo/lzo1x.h>
int main(void) { lzo_version(); return 0; }
EOF
if compile_prog "" "-llzo2" ; then
libs_softmmu="$libs_softmmu -llzo2"
lzo="yes"
else
if test "$lzo" = "yes"; then
feature_not_found "liblzo2" "Install liblzo2 devel"
fi
lzo="no"
fi
fi
##########################################
# snappy check
if test "$snappy" != "no" ; then
cat > $TMPC << EOF
#include <snappy-c.h>
int main(void) { snappy_max_compressed_length(4096); return 0; }
EOF
if compile_prog "" "-lsnappy" ; then
libs_softmmu="$libs_softmmu -lsnappy"
snappy="yes"
else
if test "$snappy" = "yes"; then
feature_not_found "libsnappy" "Install libsnappy devel"
fi
snappy="no"
fi
fi
##########################################
# bzip2 check
if test "$bzip2" != "no" ; then
cat > $TMPC << EOF
#include <bzlib.h>
int main(void) { BZ2_bzlibVersion(); return 0; }
EOF
if compile_prog "" "-lbz2" ; then
bzip2="yes"
else
if test "$bzip2" = "yes"; then
feature_not_found "libbzip2" "Install libbzip2 devel"
fi
bzip2="no"
fi
fi
##########################################
# libseccomp check
if test "$seccomp" != "no" ; then
case "$cpu" in
i386|x86_64)
libseccomp_minver="2.1.0"
;;
mips)
libseccomp_minver="2.2.0"
;;
arm|aarch64)
libseccomp_minver="2.2.3"
;;
ppc|ppc64)
libseccomp_minver="2.3.0"
;;
*)
libseccomp_minver=""
;;
esac
if test "$libseccomp_minver" != "" &&
$pkg_config --atleast-version=$libseccomp_minver libseccomp ; then
libs_softmmu="$libs_softmmu $($pkg_config --libs libseccomp)"
QEMU_CFLAGS="$QEMU_CFLAGS $($pkg_config --cflags libseccomp)"
seccomp="yes"
else
if test "$seccomp" = "yes" ; then
if test "$libseccomp_minver" != "" ; then
feature_not_found "libseccomp" \
"Install libseccomp devel >= $libseccomp_minver"
else
feature_not_found "libseccomp" \
"libseccomp is not supported for host cpu $cpu"
fi
fi
seccomp="no"
fi
fi
##########################################
# xen probe
if test "$xen" != "no" ; then
xen_libs="-lxenstore -lxenctrl -lxenguest"
xen_stable_libs="-lxenforeignmemory -lxengnttab -lxenevtchn"
# First we test whether Xen headers and libraries are available.
# If no, we are done and there is no Xen support.
# If yes, more tests are run to detect the Xen version.
# Xen (any)
cat > $TMPC <<EOF
#include <xenctrl.h>
int main(void) {
return 0;
}
EOF
if ! compile_prog "" "$xen_libs" ; then
# Xen not found
if test "$xen" = "yes" ; then
feature_not_found "xen" "Install xen devel"
fi
xen=no
# Xen unstable
elif
cat > $TMPC <<EOF &&
/*
* If we have stable libs the we don't want the libxc compat
* layers, regardless of what CFLAGS we may have been given.
*
* Also, check if xengnttab_grant_copy_segment_t is defined and
* grant copy operation is implemented.
*/
#undef XC_WANT_COMPAT_EVTCHN_API
#undef XC_WANT_COMPAT_GNTTAB_API
#undef XC_WANT_COMPAT_MAP_FOREIGN_API
#include <xenctrl.h>
#include <xenstore.h>
#include <xenevtchn.h>
#include <xengnttab.h>
#include <xenforeignmemory.h>
#include <stdint.h>
#include <xen/hvm/hvm_info_table.h>
#if !defined(HVM_MAX_VCPUS)
# error HVM_MAX_VCPUS not defined
#endif
int main(void) {
xc_interface *xc = NULL;
xenforeignmemory_handle *xfmem;
xenevtchn_handle *xe;
xengnttab_handle *xg;
xen_domain_handle_t handle;
xengnttab_grant_copy_segment_t* seg = NULL;
xs_daemon_open();
xc = xc_interface_open(0, 0, 0);
xc_hvm_set_mem_type(0, 0, HVMMEM_ram_ro, 0, 0);
xc_domain_add_to_physmap(0, 0, XENMAPSPACE_gmfn, 0, 0);
xc_hvm_inject_msi(xc, 0, 0xf0000000, 0x00000000);
xc_hvm_create_ioreq_server(xc, 0, HVM_IOREQSRV_BUFIOREQ_ATOMIC, NULL);
xc_domain_create(xc, 0, handle, 0, NULL, NULL);
xfmem = xenforeignmemory_open(0, 0);
xenforeignmemory_map(xfmem, 0, 0, 0, 0, 0);
xe = xenevtchn_open(0, 0);
xenevtchn_fd(xe);
xg = xengnttab_open(0, 0);
xengnttab_grant_copy(xg, 0, seg);
return 0;
}
EOF
compile_prog "" "$xen_libs $xen_stable_libs"
then
xen_ctrl_version=480
xen=yes
elif
cat > $TMPC <<EOF &&
/*
* If we have stable libs the we don't want the libxc compat
* layers, regardless of what CFLAGS we may have been given.
*/
#undef XC_WANT_COMPAT_EVTCHN_API
#undef XC_WANT_COMPAT_GNTTAB_API
#undef XC_WANT_COMPAT_MAP_FOREIGN_API
#include <xenctrl.h>
#include <xenstore.h>
#include <xenevtchn.h>
#include <xengnttab.h>
#include <xenforeignmemory.h>
#include <stdint.h>
#include <xen/hvm/hvm_info_table.h>
#if !defined(HVM_MAX_VCPUS)
# error HVM_MAX_VCPUS not defined
#endif
int main(void) {
xc_interface *xc = NULL;
xenforeignmemory_handle *xfmem;
xenevtchn_handle *xe;
xengnttab_handle *xg;
xen_domain_handle_t handle;
xs_daemon_open();
xc = xc_interface_open(0, 0, 0);
xc_hvm_set_mem_type(0, 0, HVMMEM_ram_ro, 0, 0);
xc_domain_add_to_physmap(0, 0, XENMAPSPACE_gmfn, 0, 0);
xc_hvm_inject_msi(xc, 0, 0xf0000000, 0x00000000);
xc_hvm_create_ioreq_server(xc, 0, HVM_IOREQSRV_BUFIOREQ_ATOMIC, NULL);
xc_domain_create(xc, 0, handle, 0, NULL, NULL);
xfmem = xenforeignmemory_open(0, 0);
xenforeignmemory_map(xfmem, 0, 0, 0, 0, 0);
xe = xenevtchn_open(0, 0);
xenevtchn_fd(xe);
xg = xengnttab_open(0, 0);
xengnttab_map_grant_ref(xg, 0, 0, 0);
return 0;
}
EOF
compile_prog "" "$xen_libs $xen_stable_libs"
then
xen_ctrl_version=471
xen=yes
elif
cat > $TMPC <<EOF &&
#include <xenctrl.h>
#include <stdint.h>
int main(void) {
xc_interface *xc = NULL;
xen_domain_handle_t handle;
xc_domain_create(xc, 0, handle, 0, NULL, NULL);
return 0;
}
EOF
compile_prog "" "$xen_libs"
then
xen_ctrl_version=470
xen=yes
# Xen 4.6
elif
cat > $TMPC <<EOF &&
#include <xenctrl.h>
#include <xenstore.h>
#include <stdint.h>
#include <xen/hvm/hvm_info_table.h>
#if !defined(HVM_MAX_VCPUS)
# error HVM_MAX_VCPUS not defined
#endif
int main(void) {
xc_interface *xc;
xs_daemon_open();
xc = xc_interface_open(0, 0, 0);
xc_hvm_set_mem_type(0, 0, HVMMEM_ram_ro, 0, 0);
xc_gnttab_open(NULL, 0);
xc_domain_add_to_physmap(0, 0, XENMAPSPACE_gmfn, 0, 0);
xc_hvm_inject_msi(xc, 0, 0xf0000000, 0x00000000);
xc_hvm_create_ioreq_server(xc, 0, HVM_IOREQSRV_BUFIOREQ_ATOMIC, NULL);
xc_reserved_device_memory_map(xc, 0, 0, 0, 0, NULL, 0);
return 0;
}
EOF
compile_prog "" "$xen_libs"
then
xen_ctrl_version=460
xen=yes
# Xen 4.5
elif
cat > $TMPC <<EOF &&
#include <xenctrl.h>
#include <xenstore.h>
#include <stdint.h>
#include <xen/hvm/hvm_info_table.h>
#if !defined(HVM_MAX_VCPUS)
# error HVM_MAX_VCPUS not defined
#endif
int main(void) {
xc_interface *xc;
xs_daemon_open();
xc = xc_interface_open(0, 0, 0);
xc_hvm_set_mem_type(0, 0, HVMMEM_ram_ro, 0, 0);
xc_gnttab_open(NULL, 0);
xc_domain_add_to_physmap(0, 0, XENMAPSPACE_gmfn, 0, 0);
xc_hvm_inject_msi(xc, 0, 0xf0000000, 0x00000000);
xc_hvm_create_ioreq_server(xc, 0, 0, NULL);
return 0;
}
EOF
compile_prog "" "$xen_libs"
then
xen_ctrl_version=450
xen=yes
elif
cat > $TMPC <<EOF &&
#include <xenctrl.h>
#include <xenstore.h>
#include <stdint.h>
#include <xen/hvm/hvm_info_table.h>
#if !defined(HVM_MAX_VCPUS)
# error HVM_MAX_VCPUS not defined
#endif
int main(void) {
xc_interface *xc;
xs_daemon_open();
xc = xc_interface_open(0, 0, 0);
xc_hvm_set_mem_type(0, 0, HVMMEM_ram_ro, 0, 0);
xc_gnttab_open(NULL, 0);
xc_domain_add_to_physmap(0, 0, XENMAPSPACE_gmfn, 0, 0);
xc_hvm_inject_msi(xc, 0, 0xf0000000, 0x00000000);
return 0;
}
EOF
compile_prog "" "$xen_libs"
then
xen_ctrl_version=420
xen=yes
else
if test "$xen" = "yes" ; then
feature_not_found "xen (unsupported version)" \
"Install a supported xen (xen 4.2 or newer)"
fi
xen=no
fi
if test "$xen" = yes; then
if test $xen_ctrl_version -ge 471 ; then
libs_softmmu="$xen_stable_libs $libs_softmmu"
fi
libs_softmmu="$xen_libs $libs_softmmu"
fi
fi
if test "$xen_pci_passthrough" != "no"; then
if test "$xen" = "yes" && test "$linux" = "yes"; then
xen_pci_passthrough=yes
else
if test "$xen_pci_passthrough" = "yes"; then
error_exit "User requested feature Xen PCI Passthrough" \
" but this feature requires /sys from Linux"
fi
xen_pci_passthrough=no
fi
fi
if test "$xen_pv_domain_build" = "yes" &&
test "$xen" != "yes"; then
error_exit "User requested Xen PV domain builder support" \
"which requires Xen support."
fi
##########################################
# Sparse probe
if test "$sparse" != "no" ; then
if has cgcc; then
sparse=yes
else
if test "$sparse" = "yes" ; then
feature_not_found "sparse" "Install sparse binary"
fi
sparse=no
fi
fi
##########################################
# X11 probe
x11_cflags=
x11_libs=-lX11
if $pkg_config --exists "x11"; then
x11_cflags=$($pkg_config --cflags x11)
x11_libs=$($pkg_config --libs x11)
fi
##########################################
# GTK probe
if test "$gtkabi" = ""; then
# The GTK ABI was not specified explicitly, so try whether 2.0 is available.
# Use 3.0 as a fallback if that is available.
if $pkg_config --exists "gtk+-2.0 >= 2.18.0"; then
gtkabi=2.0
elif $pkg_config --exists "gtk+-3.0 >= 3.0.0"; then
gtkabi=3.0
else
gtkabi=2.0
fi
fi
if test "$gtk" != "no"; then
gtkpackage="gtk+-$gtkabi"
gtkx11package="gtk+-x11-$gtkabi"
if test "$gtkabi" = "3.0" ; then
gtkversion="3.0.0"
else
gtkversion="2.18.0"
fi
if $pkg_config --exists "$gtkpackage >= $gtkversion"; then
gtk_cflags=$($pkg_config --cflags $gtkpackage)
gtk_libs=$($pkg_config --libs $gtkpackage)
gtk_version=$($pkg_config --modversion $gtkpackage)
if $pkg_config --exists "$gtkx11package >= $gtkversion"; then
gtk_cflags="$gtk_cflags $x11_cflags"
gtk_libs="$gtk_libs $x11_libs"
fi
libs_softmmu="$gtk_libs $libs_softmmu"
gtk="yes"
elif test "$gtk" = "yes"; then
feature_not_found "gtk" "Install gtk2 or gtk3 devel"
else
gtk="no"
fi
fi
##########################################
# GNUTLS probe
gnutls_works() {
# Unfortunately some distros have bad pkg-config information for gnutls
# such that it claims to exist but you get a compiler error if you try
# to use the options returned by --libs. Specifically, Ubuntu for --static
# builds doesn't work:
# https://bugs.launchpad.net/ubuntu/+source/gnutls26/+bug/1478035
#
# So sanity check the cflags/libs before assuming gnutls can be used.
if ! $pkg_config --exists "gnutls"; then
return 1
fi
write_c_skeleton
compile_prog "$($pkg_config --cflags gnutls)" "$($pkg_config --libs gnutls)"
}
gnutls_gcrypt=no
gnutls_nettle=no
if test "$gnutls" != "no"; then
if gnutls_works; then
gnutls_cflags=$($pkg_config --cflags gnutls)
gnutls_libs=$($pkg_config --libs gnutls)
libs_softmmu="$gnutls_libs $libs_softmmu"
libs_tools="$gnutls_libs $libs_tools"
QEMU_CFLAGS="$QEMU_CFLAGS $gnutls_cflags"
gnutls="yes"
# gnutls_rnd requires >= 2.11.0
if $pkg_config --exists "gnutls >= 2.11.0"; then
gnutls_rnd="yes"
else
gnutls_rnd="no"
fi
if $pkg_config --exists 'gnutls >= 3.0'; then
gnutls_gcrypt=no
gnutls_nettle=yes
elif $pkg_config --exists 'gnutls >= 2.12'; then
case $($pkg_config --libs --static gnutls) in
*gcrypt*)
gnutls_gcrypt=yes
gnutls_nettle=no
;;
*nettle*)
gnutls_gcrypt=no
gnutls_nettle=yes
;;
*)
gnutls_gcrypt=yes
gnutls_nettle=no
;;
esac
else
gnutls_gcrypt=yes
gnutls_nettle=no
fi
elif test "$gnutls" = "yes"; then
feature_not_found "gnutls" "Install gnutls devel"
else
gnutls="no"
gnutls_rnd="no"
fi
else
gnutls_rnd="no"
fi
# If user didn't give a --disable/enable-gcrypt flag,
# then mark as disabled if user requested nettle
# explicitly, or if gnutls links to nettle
if test -z "$gcrypt"
then
if test "$nettle" = "yes" || test "$gnutls_nettle" = "yes"
then
gcrypt="no"
fi
fi
# If user didn't give a --disable/enable-nettle flag,
# then mark as disabled if user requested gcrypt
# explicitly, or if gnutls links to gcrypt
if test -z "$nettle"
then
if test "$gcrypt" = "yes" || test "$gnutls_gcrypt" = "yes"
then
nettle="no"
fi
fi
has_libgcrypt_config() {
if ! has "libgcrypt-config"
then
return 1
fi
if test -n "$cross_prefix"
then
host=$(libgcrypt-config --host)
if test "$host-" != $cross_prefix
then
return 1
fi
fi
return 0
}
if test "$gcrypt" != "no"; then
if has_libgcrypt_config; then
gcrypt_cflags=$(libgcrypt-config --cflags)
gcrypt_libs=$(libgcrypt-config --libs)
# Debian has remove -lgpg-error from libgcrypt-config
# as it "spreads unnecessary dependencies" which in
# turn breaks static builds...
if test "$static" = "yes"
then
gcrypt_libs="$gcrypt_libs -lgpg-error"
fi
libs_softmmu="$gcrypt_libs $libs_softmmu"
libs_tools="$gcrypt_libs $libs_tools"
QEMU_CFLAGS="$QEMU_CFLAGS $gcrypt_cflags"
gcrypt="yes"
if test -z "$nettle"; then
nettle="no"
fi
cat > $TMPC << EOF
#include <gcrypt.h>
int main(void) {
gcry_kdf_derive(NULL, 0, GCRY_KDF_PBKDF2,
GCRY_MD_SHA256,
NULL, 0, 0, 0, NULL);
return 0;
}
EOF
if compile_prog "$gcrypt_cflags" "$gcrypt_libs" ; then
gcrypt_kdf=yes
fi
else
if test "$gcrypt" = "yes"; then
feature_not_found "gcrypt" "Install gcrypt devel"
else
gcrypt="no"
fi
fi
fi
if test "$nettle" != "no"; then
if $pkg_config --exists "nettle"; then
nettle_cflags=$($pkg_config --cflags nettle)
nettle_libs=$($pkg_config --libs nettle)
nettle_version=$($pkg_config --modversion nettle)
libs_softmmu="$nettle_libs $libs_softmmu"
libs_tools="$nettle_libs $libs_tools"
QEMU_CFLAGS="$QEMU_CFLAGS $nettle_cflags"
nettle="yes"
cat > $TMPC << EOF
#include <stddef.h>
#include <nettle/pbkdf2.h>
int main(void) {
pbkdf2_hmac_sha256(8, NULL, 1000, 8, NULL, 8, NULL);
return 0;
}
EOF
if compile_prog "$nettle_cflags" "$nettle_libs" ; then
nettle_kdf=yes
fi
else
if test "$nettle" = "yes"; then
feature_not_found "nettle" "Install nettle devel"
else
nettle="no"
fi
fi
fi
if test "$gcrypt" = "yes" && test "$nettle" = "yes"
then
error_exit "Only one of gcrypt & nettle can be enabled"
fi
##########################################
# libtasn1 - only for the TLS creds/session test suite
tasn1=yes
tasn1_cflags=""
tasn1_libs=""
if $pkg_config --exists "libtasn1"; then
tasn1_cflags=$($pkg_config --cflags libtasn1)
tasn1_libs=$($pkg_config --libs libtasn1)
else
tasn1=no
fi
##########################################
# getifaddrs (for tests/test-io-channel-socket )
have_ifaddrs_h=yes
if ! check_include "ifaddrs.h" ; then
have_ifaddrs_h=no
fi
##########################################
# VTE probe
if test "$vte" != "no"; then
if test "$gtkabi" = "3.0"; then
vteminversion="0.32.0"
if $pkg_config --exists "vte-2.91"; then
vtepackage="vte-2.91"
else
vtepackage="vte-2.90"
fi
else
vtepackage="vte"
vteminversion="0.24.0"
fi
if $pkg_config --exists "$vtepackage >= $vteminversion"; then
vte_cflags=$($pkg_config --cflags $vtepackage)
vte_libs=$($pkg_config --libs $vtepackage)
vteversion=$($pkg_config --modversion $vtepackage)
libs_softmmu="$vte_libs $libs_softmmu"
vte="yes"
elif test "$vte" = "yes"; then
if test "$gtkabi" = "3.0"; then
feature_not_found "vte" "Install libvte-2.90/2.91 devel"
else
feature_not_found "vte" "Install libvte devel"
fi
else
vte="no"
fi
fi
##########################################
# SDL probe
# Look for sdl configuration program (pkg-config or sdl-config). Try
# sdl-config even without cross prefix, and favour pkg-config over sdl-config.
if test "$sdlabi" = ""; then
if $pkg_config --exists "sdl"; then
sdlabi=1.2
elif $pkg_config --exists "sdl2"; then
sdlabi=2.0
else
sdlabi=1.2
fi
fi
if test $sdlabi = "2.0"; then
sdl_config=$sdl2_config
sdlname=sdl2
sdlconfigname=sdl2_config
elif test $sdlabi = "1.2"; then
sdlname=sdl
sdlconfigname=sdl_config
else
error_exit "Unknown sdlabi $sdlabi, must be 1.2 or 2.0"
fi
if test "$(basename $sdl_config)" != $sdlconfigname && ! has ${sdl_config}; then
sdl_config=$sdlconfigname
fi
if $pkg_config $sdlname --exists; then
sdlconfig="$pkg_config $sdlname"
sdlversion=$($sdlconfig --modversion 2>/dev/null)
elif has ${sdl_config}; then
sdlconfig="$sdl_config"
sdlversion=$($sdlconfig --version)
else
if test "$sdl" = "yes" ; then
feature_not_found "sdl" "Install SDL devel"
fi
sdl=no
fi
if test -n "$cross_prefix" && test "$(basename "$sdlconfig")" = sdl-config; then
echo warning: using "\"$sdlconfig\"" to detect cross-compiled sdl >&2
fi
sdl_too_old=no
if test "$sdl" != "no" ; then
cat > $TMPC << EOF
#include <SDL.h>
#undef main /* We don't want SDL to override our main() */
int main( void ) { return SDL_Init (SDL_INIT_VIDEO); }
EOF
sdl_cflags=$($sdlconfig --cflags 2>/dev/null)
if test "$static" = "yes" ; then
sdl_libs=$($sdlconfig --static-libs 2>/dev/null)
else
sdl_libs=$($sdlconfig --libs 2>/dev/null)
fi
if compile_prog "$sdl_cflags" "$sdl_libs" ; then
if test $(echo $sdlversion | sed 's/[^0-9]//g') -lt 121 ; then
sdl_too_old=yes
else
sdl=yes
fi
# static link with sdl ? (note: sdl.pc's --static --libs is broken)
if test "$sdl" = "yes" -a "$static" = "yes" ; then
if test $? = 0 && echo $sdl_libs | grep -- -laa > /dev/null; then
sdl_libs="$sdl_libs $(aalib-config --static-libs 2>/dev/null)"
sdl_cflags="$sdl_cflags $(aalib-config --cflags 2>/dev/null)"
fi
if compile_prog "$sdl_cflags" "$sdl_libs" ; then
:
else
sdl=no
fi
fi # static link
else # sdl not found
if test "$sdl" = "yes" ; then
feature_not_found "sdl" "Install SDL devel"
fi
sdl=no
fi # sdl compile test
fi
if test "$sdl" = "yes" ; then
cat > $TMPC <<EOF
#include <SDL.h>
#if defined(SDL_VIDEO_DRIVER_X11)
#include <X11/XKBlib.h>
#else
#error No x11 support
#endif
int main(void) { return 0; }
EOF
if compile_prog "$sdl_cflags $x11_cflags" "$sdl_libs $x11_libs" ; then
sdl_cflags="$sdl_cflags $x11_cflags"
sdl_libs="$sdl_libs $x11_libs"
fi
libs_softmmu="$sdl_libs $libs_softmmu"
fi
##########################################
# RDMA needs OpenFabrics libraries
if test "$rdma" != "no" ; then
cat > $TMPC <<EOF
#include <rdma/rdma_cma.h>
int main(void) { return 0; }
EOF
rdma_libs="-lrdmacm -libverbs"
if compile_prog "" "$rdma_libs" ; then
rdma="yes"
libs_softmmu="$libs_softmmu $rdma_libs"
else
if test "$rdma" = "yes" ; then
error_exit \
" OpenFabrics librdmacm/libibverbs not present." \
" Your options:" \
" (1) Fast: Install infiniband packages from your distro." \
" (2) Cleanest: Install libraries from www.openfabrics.org" \
" (3) Also: Install softiwarp if you don't have RDMA hardware"
fi
rdma="no"
fi
fi
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 23:27:28 +03:00
##########################################
# VNC SASL detection
if test "$vnc" = "yes" -a "$vnc_sasl" != "no" ; then
cat > $TMPC <<EOF
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 23:27:28 +03:00
#include <sasl/sasl.h>
#include <stdio.h>
int main(void) { sasl_server_init(NULL, "qemu"); return 0; }
EOF
# Assuming Cyrus-SASL installed in /usr prefix
vnc_sasl_cflags=""
vnc_sasl_libs="-lsasl2"
if compile_prog "$vnc_sasl_cflags" "$vnc_sasl_libs" ; then
vnc_sasl=yes
libs_softmmu="$vnc_sasl_libs $libs_softmmu"
QEMU_CFLAGS="$QEMU_CFLAGS $vnc_sasl_cflags"
else
if test "$vnc_sasl" = "yes" ; then
feature_not_found "vnc-sasl" "Install Cyrus SASL devel"
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 23:27:28 +03:00
fi
vnc_sasl=no
fi
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 23:27:28 +03:00
fi
##########################################
# VNC JPEG detection
if test "$vnc" = "yes" -a "$vnc_jpeg" != "no" ; then
cat > $TMPC <<EOF
#include <stdio.h>
#include <jpeglib.h>
int main(void) { struct jpeg_compress_struct s; jpeg_create_compress(&s); return 0; }
EOF
vnc_jpeg_cflags=""
vnc_jpeg_libs="-ljpeg"
if compile_prog "$vnc_jpeg_cflags" "$vnc_jpeg_libs" ; then
vnc_jpeg=yes
libs_softmmu="$vnc_jpeg_libs $libs_softmmu"
QEMU_CFLAGS="$QEMU_CFLAGS $vnc_jpeg_cflags"
else
if test "$vnc_jpeg" = "yes" ; then
feature_not_found "vnc-jpeg" "Install libjpeg-turbo devel"
fi
vnc_jpeg=no
fi
fi
##########################################
# VNC PNG detection
if test "$vnc" = "yes" -a "$vnc_png" != "no" ; then
cat > $TMPC <<EOF
//#include <stdio.h>
#include <png.h>
#include <stddef.h>
int main(void) {
png_structp png_ptr;
png_ptr = png_create_write_struct(PNG_LIBPNG_VER_STRING, NULL, NULL, NULL);
return png_ptr != 0;
}
EOF
if $pkg_config libpng --exists; then
vnc_png_cflags=$($pkg_config libpng --cflags)
vnc_png_libs=$($pkg_config libpng --libs)
else
vnc_png_cflags=""
vnc_png_libs="-lpng"
fi
if compile_prog "$vnc_png_cflags" "$vnc_png_libs" ; then
vnc_png=yes
libs_softmmu="$vnc_png_libs $libs_softmmu"
QEMU_CFLAGS="$QEMU_CFLAGS $vnc_png_cflags"
else
if test "$vnc_png" = "yes" ; then
feature_not_found "vnc-png" "Install libpng devel"
fi
vnc_png=no
fi
fi
Support ACLs for controlling VNC access ("Daniel P. Berrange") This patch introduces a generic internal API for access control lists to be used by network servers in QEMU. It adds support for checking these ACL in the VNC server, in two places. The first ACL is for the SASL authentication mechanism, checking the SASL username. This ACL is called 'vnc.username'. The second is for the TLS authentication mechanism, when x509 client certificates are turned on, checking against the Distinguished Name of the client. This ACL is called 'vnc.x509dname' The internal API provides for an ACL with the following characteristics - A unique name, eg vnc.username, and vnc.x509dname. - A default policy, allow or deny - An ordered series of match rules, with allow or deny policy If none of the match rules apply, then the default policy is used. There is a monitor API to manipulate the ACLs, which I'll describe via examples (qemu) acl show vnc.username policy: allow (qemu) acl policy vnc.username denya acl: policy set to 'deny' (qemu) acl allow vnc.username fred acl: added rule at position 1 (qemu) acl allow vnc.username bob acl: added rule at position 2 (qemu) acl allow vnc.username joe 1 acl: added rule at position 1 (qemu) acl show vnc.username policy: deny 0: allow fred 1: allow joe 2: allow bob (qemu) acl show vnc.x509dname policy: allow (qemu) acl policy vnc.x509dname deny acl: policy set to 'deny' (qemu) acl allow vnc.x509dname C=GB,O=ACME,L=London,CN=* acl: added rule at position 1 (qemu) acl allow vnc.x509dname C=GB,O=ACME,L=Boston,CN=bob acl: added rule at position 2 (qemu) acl show vnc.x509dname policy: deny 0: allow C=GB,O=ACME,L=London,CN=* 1: allow C=GB,O=ACME,L=Boston,CN=bob By default the VNC server will not use any ACLs, allowing access to the server if the user successfully authenticates. To enable use of ACLs to restrict user access, the ',acl' flag should be given when starting QEMU. The initial ACL activated will be a 'deny all' policy and should be customized using monitor commands. eg enable SASL auth and ACLs qemu .... -vnc localhost:1,sasl,acl The next patch will provide a way to load a pre-defined ACL when starting up Makefile | 6 + b/acl.c | 185 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ b/acl.h | 74 ++++++++++++++++++++++ configure | 18 +++++ monitor.c | 95 ++++++++++++++++++++++++++++ qemu-doc.texi | 49 ++++++++++++++ vnc-auth-sasl.c | 16 +++- vnc-auth-sasl.h | 7 ++ vnc-tls.c | 19 +++++ vnc-tls.h | 3 vnc.c | 21 ++++++ vnc.h | 3 12 files changed, 491 insertions(+), 5 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6726 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 23:27:37 +03:00
##########################################
# fnmatch() probe, used for ACL routines
fnmatch="no"
cat > $TMPC << EOF
#include <fnmatch.h>
int main(void)
{
fnmatch("foo", "foo", 0);
return 0;
}
EOF
if compile_prog "" "" ; then
Support ACLs for controlling VNC access ("Daniel P. Berrange") This patch introduces a generic internal API for access control lists to be used by network servers in QEMU. It adds support for checking these ACL in the VNC server, in two places. The first ACL is for the SASL authentication mechanism, checking the SASL username. This ACL is called 'vnc.username'. The second is for the TLS authentication mechanism, when x509 client certificates are turned on, checking against the Distinguished Name of the client. This ACL is called 'vnc.x509dname' The internal API provides for an ACL with the following characteristics - A unique name, eg vnc.username, and vnc.x509dname. - A default policy, allow or deny - An ordered series of match rules, with allow or deny policy If none of the match rules apply, then the default policy is used. There is a monitor API to manipulate the ACLs, which I'll describe via examples (qemu) acl show vnc.username policy: allow (qemu) acl policy vnc.username denya acl: policy set to 'deny' (qemu) acl allow vnc.username fred acl: added rule at position 1 (qemu) acl allow vnc.username bob acl: added rule at position 2 (qemu) acl allow vnc.username joe 1 acl: added rule at position 1 (qemu) acl show vnc.username policy: deny 0: allow fred 1: allow joe 2: allow bob (qemu) acl show vnc.x509dname policy: allow (qemu) acl policy vnc.x509dname deny acl: policy set to 'deny' (qemu) acl allow vnc.x509dname C=GB,O=ACME,L=London,CN=* acl: added rule at position 1 (qemu) acl allow vnc.x509dname C=GB,O=ACME,L=Boston,CN=bob acl: added rule at position 2 (qemu) acl show vnc.x509dname policy: deny 0: allow C=GB,O=ACME,L=London,CN=* 1: allow C=GB,O=ACME,L=Boston,CN=bob By default the VNC server will not use any ACLs, allowing access to the server if the user successfully authenticates. To enable use of ACLs to restrict user access, the ',acl' flag should be given when starting QEMU. The initial ACL activated will be a 'deny all' policy and should be customized using monitor commands. eg enable SASL auth and ACLs qemu .... -vnc localhost:1,sasl,acl The next patch will provide a way to load a pre-defined ACL when starting up Makefile | 6 + b/acl.c | 185 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ b/acl.h | 74 ++++++++++++++++++++++ configure | 18 +++++ monitor.c | 95 ++++++++++++++++++++++++++++ qemu-doc.texi | 49 ++++++++++++++ vnc-auth-sasl.c | 16 +++- vnc-auth-sasl.h | 7 ++ vnc-tls.c | 19 +++++ vnc-tls.h | 3 vnc.c | 21 ++++++ vnc.h | 3 12 files changed, 491 insertions(+), 5 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6726 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 23:27:37 +03:00
fnmatch="yes"
fi
##########################################
# xfsctl() probe, used for raw-posix
if test "$xfs" != "no" ; then
cat > $TMPC << EOF
#include <stddef.h> /* NULL */
#include <xfs/xfs.h>
int main(void)
{
xfsctl(NULL, 0, 0, NULL);
return 0;
}
EOF
if compile_prog "" "" ; then
xfs="yes"
else
if test "$xfs" = "yes" ; then
feature_not_found "xfs" "Instal xfsprogs/xfslibs devel"
fi
xfs=no
fi
fi
##########################################
# vde libraries probe
if test "$vde" != "no" ; then
vde_libs="-lvdeplug"
cat > $TMPC << EOF
#include <libvdeplug.h>
int main(void)
{
struct vde_open_args a = {0, 0, 0};
char s[] = "";
vde_open(s, s, &a);
return 0;
}
EOF
if compile_prog "" "$vde_libs" ; then
vde=yes
libs_softmmu="$vde_libs $libs_softmmu"
libs_tools="$vde_libs $libs_tools"
else
if test "$vde" = "yes" ; then
feature_not_found "vde" "Install vde (Virtual Distributed Ethernet) devel"
fi
vde=no
fi
fi
##########################################
# netmap support probe
# Apart from looking for netmap headers, we make sure that the host API version
# supports the netmap backend (>=11). The upper bound (15) is meant to simulate
# a minor/major version number. Minor new features will be marked with values up
# to 15, and if something happens that requires a change to the backend we will
# move above 15, submit the backend fixes and modify this two bounds.
if test "$netmap" != "no" ; then
cat > $TMPC << EOF
#include <inttypes.h>
#include <net/if.h>
#include <net/netmap.h>
#include <net/netmap_user.h>
#if (NETMAP_API < 11) || (NETMAP_API > 15)
#error
#endif
int main(void) { return 0; }
EOF
if compile_prog "" "" ; then
netmap=yes
else
if test "$netmap" = "yes" ; then
feature_not_found "netmap"
fi
netmap=no
fi
fi
##########################################
# libcap-ng library probe
if test "$cap_ng" != "no" ; then
cap_libs="-lcap-ng"
cat > $TMPC << EOF
#include <cap-ng.h>
int main(void)
{
capng_capability_to_name(CAPNG_EFFECTIVE);
return 0;
}
EOF
if compile_prog "" "$cap_libs" ; then
cap_ng=yes
libs_tools="$cap_libs $libs_tools"
else
if test "$cap_ng" = "yes" ; then
feature_not_found "cap_ng" "Install libcap-ng devel"
fi
cap_ng=no
fi
fi
##########################################
# Sound support libraries probe
audio_drv_probe()
{
drv=$1
hdr=$2
lib=$3
exp=$4
cfl=$5
cat > $TMPC << EOF
#include <$hdr>
int main(void) { $exp }
EOF
if compile_prog "$cfl" "$lib" ; then
:
else
error_exit "$drv check failed" \
"Make sure to have the $drv libs and headers installed."
fi
}
audio_drv_list=$(echo "$audio_drv_list" | sed -e 's/,/ /g')
for drv in $audio_drv_list; do
case $drv in
alsa)
audio_drv_probe $drv alsa/asoundlib.h -lasound \
"return snd_pcm_close((snd_pcm_t *)0);"
libs_softmmu="-lasound $libs_softmmu"
;;
pa)
audio_drv_probe $drv pulse/pulseaudio.h "-lpulse" \
"pa_context_set_source_output_volume(NULL, 0, NULL, NULL, NULL); return 0;"
libs_softmmu="-lpulse $libs_softmmu"
audio_pt_int="yes"
;;
coreaudio)
libs_softmmu="-framework CoreAudio $libs_softmmu"
;;
dsound)
libs_softmmu="-lole32 -ldxguid $libs_softmmu"
audio_win_int="yes"
;;
oss)
libs_softmmu="$oss_lib $libs_softmmu"
;;
sdl|wav)
# XXX: Probes for CoreAudio, DirectSound, SDL(?)
;;
*)
echo "$audio_possible_drivers" | grep -q "\<$drv\>" || {
error_exit "Unknown driver '$drv' selected" \
"Possible drivers are: $audio_possible_drivers"
}
;;
esac
done
##########################################
# BrlAPI probe
if test "$brlapi" != "no" ; then
brlapi_libs="-lbrlapi"
cat > $TMPC << EOF
#include <brlapi.h>
#include <stddef.h>
int main( void ) { return brlapi__openConnection (NULL, NULL, NULL); }
EOF
if compile_prog "" "$brlapi_libs" ; then
brlapi=yes
libs_softmmu="$brlapi_libs $libs_softmmu"
else
if test "$brlapi" = "yes" ; then
feature_not_found "brlapi" "Install brlapi devel"
fi
brlapi=no
fi
fi
##########################################
# curses probe
if test "$curses" != "no" ; then
if test "$mingw32" = "yes" ; then
curses_list="$($pkg_config --libs ncurses 2>/dev/null):-lpdcurses"
else
curses_list="$($pkg_config --libs ncurses 2>/dev/null):-lncurses:-lcurses"
fi
curses_found=no
cat > $TMPC << EOF
#include <curses.h>
int main(void) {
const char *s = curses_version();
resize_term(0, 0);
return s != 0;
}
EOF
IFS=:
for curses_lib in $curses_list; do
unset IFS
if compile_prog "" "$curses_lib" ; then
curses_found=yes
libs_softmmu="$curses_lib $libs_softmmu"
break
fi
done
unset IFS
if test "$curses_found" = "yes" ; then
curses=yes
else
if test "$curses" = "yes" ; then
feature_not_found "curses" "Install ncurses devel"
fi
curses=no
fi
fi
##########################################
# curl probe
if test "$curl" != "no" ; then
if $pkg_config libcurl --exists; then
curlconfig="$pkg_config libcurl"
else
curlconfig=curl-config
fi
cat > $TMPC << EOF
#include <curl/curl.h>
int main(void) { curl_easy_init(); curl_multi_setopt(0, 0, 0); return 0; }
EOF
curl_cflags=$($curlconfig --cflags 2>/dev/null)
curl_libs=$($curlconfig --libs 2>/dev/null)
if compile_prog "$curl_cflags" "$curl_libs" ; then
curl=yes
else
if test "$curl" = "yes" ; then
feature_not_found "curl" "Install libcurl devel"
fi
curl=no
fi
fi # test "$curl"
##########################################
# bluez support probe
if test "$bluez" != "no" ; then
cat > $TMPC << EOF
#include <bluetooth/bluetooth.h>
int main(void) { return bt_error(0); }
EOF
bluez_cflags=$($pkg_config --cflags bluez 2>/dev/null)
bluez_libs=$($pkg_config --libs bluez 2>/dev/null)
if compile_prog "$bluez_cflags" "$bluez_libs" ; then
bluez=yes
libs_softmmu="$bluez_libs $libs_softmmu"
else
if test "$bluez" = "yes" ; then
feature_not_found "bluez" "Install bluez-libs/libbluetooth devel"
fi
bluez="no"
fi
fi
##########################################
# glib support probe
glib_req_ver=2.22
glib_modules=gthread-2.0
if test "$modules" = yes; then
glib_modules="$glib_modules gmodule-2.0"
fi
for i in $glib_modules; do
if $pkg_config --atleast-version=$glib_req_ver $i; then
glib_cflags=$($pkg_config --cflags $i)
glib_libs=$($pkg_config --libs $i)
QEMU_CFLAGS="$glib_cflags $QEMU_CFLAGS"
LIBS="$glib_libs $LIBS"
libs_qga="$glib_libs $libs_qga"
else
error_exit "glib-$glib_req_ver $i is required to compile QEMU"
fi
done
configure: sanity check the glib library that pkg-config finds Developers on 64-bit machines will often try to perform a 32-bit build of QEMU by running ./configure --extra-cflags="-m32" Unfortunately if PKG_CONFIG_LIBDIR is not set to point to the location of the 32-bit pkg-config files, then configure will silently pick up the 64-bit pkg-config files and still succeed. This causes a problem for glib because it means QEMU will be pulling in /usr/lib64/glib-2.0/include/glibconfig.h instead of /usr/lib/glib-2.0/include/glibconfig.h This causes problems because the 'gsize' type (defined as 'unsigned long') will no longer be fully compatible with the 'size_t' type (defined as 'unsigned int'). Although both are the same size, the compiler refuses to allow casts from 'unsigned long *' to 'unsigned int *' as they are different pointer types. This results in non-obvious compiler errors when building QEMU eg qga/commands-posix.c: In function ‘qmp_guest_set_user_password’: qga/commands-posix.c:1912:55: error: passing argument 2 of ‘g_base64_decode’ from incompatible pointer type [-Werror=incompatible-pointer-types] rawpasswddata = (char *)g_base64_decode(password, &rawpasswdlen); ^ In file included from /usr/include/glib-2.0/glib.h:35:0, from qga/commands-posix.c:14: /usr/include/glib-2.0/glib/gbase64.h:52:9: note: expected ‘gsize * {aka long unsigned int *}’ but argument is of type ‘size_t * {aka unsigned int *}’ guchar *g_base64_decode (const gchar *text, ^ cc1: all warnings being treated as errors To detect this problem, add a check to configure that verifies that GLIB_SIZEOF_SIZE_T matches sizeof(size_t). If this fails print a warning suggesting that the dev probably needs to set PKG_CONFIG_LIBDIR. On Fedora x86_64 it passes with any of: # ./configure # PKG_CONFIG_LIBDIR=/usr/lib/pkgconfig ./configure --extra-cflags="-m32" # PKG_CONFIG_LIBDIR=/usr/lib64/pkgconfig ./configure --extra-cflags="-m64" And fails with a mis-match # PKG_CONFIG_LIBDIR=/usr/lib64/pkgconfig ./configure --extra-cflags="-m32" # PKG_CONFIG_LIBDIR=/usr/lib/pkgconfig ./configure --extra-cflags="-m64" ERROR: sizeof(size_t) doesn't match GLIB_SIZEOF_SIZE_T. You probably need to set PKG_CONFIG_LIBDIR to point to the right pkg-config files for your build target Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1453885245-15562-1-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-01-27 12:00:45 +03:00
# Sanity check that the current size_t matches the
# size that glib thinks it should be. This catches
# problems on multi-arch where people try to build
# 32-bit QEMU while pointing at 64-bit glib headers
cat > $TMPC <<EOF
#include <glib.h>
#include <unistd.h>
#define QEMU_BUILD_BUG_ON(x) \
typedef char qemu_build_bug_on[(x)?-1:1] __attribute__((unused));
int main(void) {
QEMU_BUILD_BUG_ON(sizeof(size_t) != GLIB_SIZEOF_SIZE_T);
return 0;
}
EOF
if ! compile_prog "$CFLAGS" "$LIBS" ; then
configure: sanity check the glib library that pkg-config finds Developers on 64-bit machines will often try to perform a 32-bit build of QEMU by running ./configure --extra-cflags="-m32" Unfortunately if PKG_CONFIG_LIBDIR is not set to point to the location of the 32-bit pkg-config files, then configure will silently pick up the 64-bit pkg-config files and still succeed. This causes a problem for glib because it means QEMU will be pulling in /usr/lib64/glib-2.0/include/glibconfig.h instead of /usr/lib/glib-2.0/include/glibconfig.h This causes problems because the 'gsize' type (defined as 'unsigned long') will no longer be fully compatible with the 'size_t' type (defined as 'unsigned int'). Although both are the same size, the compiler refuses to allow casts from 'unsigned long *' to 'unsigned int *' as they are different pointer types. This results in non-obvious compiler errors when building QEMU eg qga/commands-posix.c: In function ‘qmp_guest_set_user_password’: qga/commands-posix.c:1912:55: error: passing argument 2 of ‘g_base64_decode’ from incompatible pointer type [-Werror=incompatible-pointer-types] rawpasswddata = (char *)g_base64_decode(password, &rawpasswdlen); ^ In file included from /usr/include/glib-2.0/glib.h:35:0, from qga/commands-posix.c:14: /usr/include/glib-2.0/glib/gbase64.h:52:9: note: expected ‘gsize * {aka long unsigned int *}’ but argument is of type ‘size_t * {aka unsigned int *}’ guchar *g_base64_decode (const gchar *text, ^ cc1: all warnings being treated as errors To detect this problem, add a check to configure that verifies that GLIB_SIZEOF_SIZE_T matches sizeof(size_t). If this fails print a warning suggesting that the dev probably needs to set PKG_CONFIG_LIBDIR. On Fedora x86_64 it passes with any of: # ./configure # PKG_CONFIG_LIBDIR=/usr/lib/pkgconfig ./configure --extra-cflags="-m32" # PKG_CONFIG_LIBDIR=/usr/lib64/pkgconfig ./configure --extra-cflags="-m64" And fails with a mis-match # PKG_CONFIG_LIBDIR=/usr/lib64/pkgconfig ./configure --extra-cflags="-m32" # PKG_CONFIG_LIBDIR=/usr/lib/pkgconfig ./configure --extra-cflags="-m64" ERROR: sizeof(size_t) doesn't match GLIB_SIZEOF_SIZE_T. You probably need to set PKG_CONFIG_LIBDIR to point to the right pkg-config files for your build target Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1453885245-15562-1-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-01-27 12:00:45 +03:00
error_exit "sizeof(size_t) doesn't match GLIB_SIZEOF_SIZE_T."\
"You probably need to set PKG_CONFIG_LIBDIR"\
"to point to the right pkg-config files for your"\
"build target"
fi
# g_test_trap_subprocess added in 2.38. Used by some tests.
glib_subprocess=yes
if test "$mingw32" = "yes" || ! $pkg_config --atleast-version=2.38 glib-2.0; then
glib_subprocess=no
fi
# Silence clang 3.5.0 warnings about glib attribute __alloc_size__ usage
cat > $TMPC << EOF
#include <glib.h>
int main(void) { return 0; }
EOF
if ! compile_prog "$glib_cflags -Werror" "$glib_libs" ; then
if cc_has_warning_flag "-Wno-unknown-attributes"; then
glib_cflags="-Wno-unknown-attributes $glib_cflags"
CFLAGS="-Wno-unknown-attributes $CFLAGS"
fi
fi
##########################################
# SHA command probe for modules
if test "$modules" = yes; then
shacmd_probe="sha1sum sha1 shasum"
for c in $shacmd_probe; do
if has $c; then
shacmd="$c"
break
fi
done
if test "$shacmd" = ""; then
error_exit "one of the checksum commands is required to enable modules: $shacmd_probe"
fi
fi
##########################################
# pixman support probe
if test "$pixman" = ""; then
if test "$want_tools" = "no" -a "$softmmu" = "no"; then
pixman="none"
elif $pkg_config --atleast-version=0.21.8 pixman-1 > /dev/null 2>&1; then
pixman="system"
else
pixman="internal"
fi
fi
if test "$pixman" = "none"; then
if test "$want_tools" != "no" -o "$softmmu" != "no"; then
error_exit "pixman disabled but system emulation or tools build" \
"enabled. You can turn off pixman only if you also" \
"disable all system emulation targets and the tools" \
"build with '--disable-tools --disable-system'."
fi
pixman_cflags=
pixman_libs=
elif test "$pixman" = "system"; then
# pixman version has been checked above
pixman_cflags=$($pkg_config --cflags pixman-1)
pixman_libs=$($pkg_config --libs pixman-1)
else
if test ! -d ${source_path}/pixman/pixman; then
error_exit "pixman >= 0.21.8 not present. Your options:" \
" (1) Preferred: Install the pixman devel package (any recent" \
" distro should have packages as Xorg needs pixman too)." \
" (2) Fetch the pixman submodule, using:" \
" git submodule update --init pixman"
fi
mkdir -p pixman/pixman
pixman_cflags="-I\$(SRC_PATH)/pixman/pixman -I\$(BUILD_DIR)/pixman/pixman"
pixman_libs="-L\$(BUILD_DIR)/pixman/pixman/.libs -lpixman-1"
fi
##########################################
# libcap probe
if test "$cap" != "no" ; then
cat > $TMPC <<EOF
#include <stdio.h>
#include <sys/capability.h>
int main(void) { cap_t caps; caps = cap_init(); return caps != NULL; }
EOF
if compile_prog "" "-lcap" ; then
cap=yes
else
cap=no
fi
fi
##########################################
# pthread probe
PTHREADLIBS_LIST="-pthread -lpthread -lpthreadGC2"
pthread=no
cat > $TMPC << EOF
#include <pthread.h>
static void *f(void *p) { return NULL; }
int main(void) {
pthread_t thread;
pthread_create(&thread, 0, f, 0);
return 0;
}
EOF
if compile_prog "" "" ; then
pthread=yes
else
for pthread_lib in $PTHREADLIBS_LIST; do
if compile_prog "" "$pthread_lib" ; then
pthread=yes
found=no
for lib_entry in $LIBS; do
if test "$lib_entry" = "$pthread_lib"; then
found=yes
break
fi
done
if test "$found" = "no"; then
LIBS="$pthread_lib $LIBS"
fi
tests: introduce a framework for testing migration performance This introduces a moderately general purpose framework for testing performance of migration. The initial guest workload is provided by the included 'stress' program, which is configured to spawn one thread per guest CPU and run a maximally memory intensive workload. It will loop over GB of memory, xor'ing each byte with data from a 4k array of random bytes. This ensures heavy read and write load across all of guest memory to stress the migration performance. While running the 'stress' program will record how long it takes to xor each GB of memory and print this data for later reporting. The test engine will spawn a pair of QEMU processes, either on the same host, or with the target on a remote host via ssh, using the host kernel and a custom initrd built with 'stress' as the /init binary. Kernel command line args are set to ensure a fast kernel boot time (< 1 second) between launching QEMU and the stress program starting execution. None the less, the test engine will initially wait N seconds for the guest workload to stablize, before starting the migration operation. When migration is running, the engine will use pause, post-copy, autoconverge, xbzrle compression and multithread compression features, as well as downtime & bandwidth tuning to encourage completion. If migration completes, the test engine will wait N seconds again for the guest workooad to stablize on the target host. If migration does not complete after a preset number of iterations, it will be aborted. While the QEMU process is running on the source host, the test engine will sample the host CPU usage of QEMU as a whole, and each vCPU thread. While migration is running, it will record all the stats reported by 'query-migration'. Finally, it will capture the output of the stress program running in the guest. All the data produced from a single test execution is recorded in a structured JSON file. A separate program is then able to create interactive charts using the "plotly" python + javascript libraries, showing the characteristics of the migration. The data output provides visualization of the effect on guest vCPU workloads from the migration process, the corresponding vCPU utilization on the host, and the overall CPU hit from QEMU on the host. This is correlated from statistics from the migration process, such as downtime, vCPU throttling and iteration number. While the tests can be run individually with arbitrary parameters, there is also a facility for producing batch reports for a number of pre-defined scenarios / comparisons, in order to be able to get standardized results across different hardware configurations (eg TCP vs RDMA, or comparing different VCPU counts / memory sizes, etc). To use this, first you must build the initrd image $ make tests/migration/initrd-stress.img To run a a one-shot test with all default parameters $ ./tests/migration/guestperf.py > result.json This has many command line args for varying its behaviour. For example, to increase the RAM size and CPU count and bind it to specific host NUMA nodes $ ./tests/migration/guestperf.py \ --mem 4 --cpus 2 \ --src-mem-bind 0 --src-cpu-bind 0,1 \ --dst-mem-bind 1 --dst-cpu-bind 2,3 \ > result.json Using mem + cpu binding is strongly recommended on NUMA machines, otherwise the guest performance results will vary wildly between runs of the test due to lucky/unlucky NUMA placement, making sensible data analysis impossible. To make it run across separate hosts: $ ./tests/migration/guestperf.py \ --dst-host somehostname > result.json To request that post-copy is enabled, with switchover after 5 iterations $ ./tests/migration/guestperf.py \ --post-copy --post-copy-iters 5 > result.json Once a result.json file is created, a graph of the data can be generated, showing guest workload performance per thread and the migration iteration points: $ ./tests/migration/guestperf-plot.py --output result.html \ --migration-iters --split-guest-cpu result.json To further include host vCPU utilization and overall QEMU utilization $ ./tests/migration/guestperf-plot.py --output result.html \ --migration-iters --split-guest-cpu \ --qemu-cpu --vcpu-cpu result.json NB, the 'guestperf-plot.py' command requires that you have the plotly python library installed. eg you must do $ pip install --user plotly Viewing the result.html file requires that you have the plotly.min.js file in the same directory as the HTML output. This js file is installed as part of the plotly python library, so can be found in $HOME/.local/lib/python2.7/site-packages/plotly/offline/plotly.min.js The guestperf-plot.py program can accept multiple json files to plot, enabling results from different configurations to be compared. Finally, to run the entire standardized set of comparisons $ ./tests/migration/guestperf-batch.py \ --dst-host somehost \ --mem 4 --cpus 2 \ --src-mem-bind 0 --src-cpu-bind 0,1 \ --dst-mem-bind 1 --dst-cpu-bind 2,3 --output tcp-somehost-4gb-2cpu will store JSON files from all scenarios in the directory named tcp-somehost-4gb-2cpu Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1469020993-29426-7-git-send-email-berrange@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-07-20 16:23:13 +03:00
PTHREAD_LIB="$pthread_lib"
break
fi
done
fi
if test "$mingw32" != yes -a "$pthread" = no; then
error_exit "pthread check failed" \
"Make sure to have the pthread libs and headers installed."
fi
# check for pthread_setname_np
pthread_setname_np=no
cat > $TMPC << EOF
#include <pthread.h>
static void *f(void *p) { return NULL; }
int main(void)
{
pthread_t thread;
pthread_create(&thread, 0, f, 0);
pthread_setname_np(thread, "QEMU");
return 0;
}
EOF
if compile_prog "" "$pthread_lib" ; then
pthread_setname_np=yes
fi
##########################################
# rbd probe
if test "$rbd" != "no" ; then
cat > $TMPC <<EOF
#include <stdio.h>
#include <rbd/librbd.h>
int main(void) {
rados_t cluster;
rados_create(&cluster, NULL);
return 0;
}
EOF
rbd_libs="-lrbd -lrados"
if compile_prog "" "$rbd_libs" ; then
rbd=yes
else
if test "$rbd" = "yes" ; then
feature_not_found "rados block device" "Install librbd/ceph devel"
fi
rbd=no
fi
fi
##########################################
# libssh2 probe
min_libssh2_version=1.2.8
if test "$libssh2" != "no" ; then
if $pkg_config --atleast-version=$min_libssh2_version libssh2; then
libssh2_cflags=$($pkg_config libssh2 --cflags)
libssh2_libs=$($pkg_config libssh2 --libs)
libssh2=yes
else
if test "$libssh2" = "yes" ; then
error_exit "libssh2 >= $min_libssh2_version required for --enable-libssh2"
fi
libssh2=no
fi
fi
##########################################
# libssh2_sftp_fsync probe
if test "$libssh2" = "yes"; then
cat > $TMPC <<EOF
#include <stdio.h>
#include <libssh2.h>
#include <libssh2_sftp.h>
int main(void) {
LIBSSH2_SESSION *session;
LIBSSH2_SFTP *sftp;
LIBSSH2_SFTP_HANDLE *sftp_handle;
session = libssh2_session_init ();
sftp = libssh2_sftp_init (session);
sftp_handle = libssh2_sftp_open (sftp, "/", 0, 0);
libssh2_sftp_fsync (sftp_handle);
return 0;
}
EOF
# libssh2_cflags/libssh2_libs defined in previous test.
if compile_prog "$libssh2_cflags" "$libssh2_libs" ; then
QEMU_CFLAGS="-DHAS_LIBSSH2_SFTP_FSYNC $QEMU_CFLAGS"
fi
fi
##########################################
# linux-aio probe
if test "$linux_aio" != "no" ; then
cat > $TMPC <<EOF
#include <libaio.h>
#include <sys/eventfd.h>
#include <stddef.h>
int main(void) { io_setup(0, NULL); io_set_eventfd(NULL, 0); eventfd(0, 0); return 0; }
EOF
if compile_prog "" "-laio" ; then
linux_aio=yes
else
if test "$linux_aio" = "yes" ; then
feature_not_found "linux AIO" "Install libaio devel"
fi
linux_aio=no
fi
fi
##########################################
# TPM passthrough is only on x86 Linux
if test "$targetos" = Linux && test "$cpu" = i386 -o "$cpu" = x86_64; then
tpm_passthrough=$tpm
else
tpm_passthrough=no
fi
##########################################
# attr probe
if test "$attr" != "no" ; then
cat > $TMPC <<EOF
#include <stdio.h>
#include <sys/types.h>
#ifdef CONFIG_LIBATTR
#include <attr/xattr.h>
#else
#include <sys/xattr.h>
#endif
int main(void) { getxattr(NULL, NULL, NULL, 0); setxattr(NULL, NULL, NULL, 0, 0); return 0; }
EOF
if compile_prog "" "" ; then
attr=yes
# Older distros have <attr/xattr.h>, and need -lattr:
elif compile_prog "-DCONFIG_LIBATTR" "-lattr" ; then
attr=yes
LIBS="-lattr $LIBS"
libattr=yes
else
if test "$attr" = "yes" ; then
feature_not_found "ATTR" "Install libc6 or libattr devel"
fi
attr=no
fi
fi
##########################################
# iovec probe
cat > $TMPC <<EOF
#include <sys/types.h>
#include <sys/uio.h>
#include <unistd.h>
int main(void) { return sizeof(struct iovec); }
EOF
iovec=no
if compile_prog "" "" ; then
iovec=yes
fi
##########################################
# preadv probe
cat > $TMPC <<EOF
#include <sys/types.h>
#include <sys/uio.h>
#include <unistd.h>
int main(void) { return preadv(0, 0, 0, 0); }
EOF
preadv=no
if compile_prog "" "" ; then
preadv=yes
fi
##########################################
# fdt probe
# fdt support is mandatory for at least some target architectures,
# so insist on it if we're building those system emulators.
fdt_required=no
for target in $target_list; do
case $target in
aarch64*-softmmu|arm*-softmmu|ppc*-softmmu|microblaze*-softmmu)
fdt_required=yes
;;
esac
done
if test "$fdt_required" = "yes"; then
if test "$fdt" = "no"; then
error_exit "fdt disabled but some requested targets require it." \
"You can turn off fdt only if you also disable all the system emulation" \
"targets which need it (by specifying a cut down --target-list)."
fi
fdt=yes
fi
if test "$fdt" != "no" ; then
fdt_libs="-lfdt"
# explicitly check for libfdt_env.h as it is missing in some stable installs
# and test for required functions to make sure we are on a version >= 1.4.0
cat > $TMPC << EOF
#include <libfdt.h>
#include <libfdt_env.h>
int main(void) { fdt_get_property_by_offset(0, 0, 0); return 0; }
EOF
if compile_prog "" "$fdt_libs" ; then
# system DTC is good - use it
fdt=yes
elif test -d ${source_path}/dtc/libfdt ; then
# have submodule DTC - use it
fdt=yes
dtc_internal="yes"
mkdir -p dtc
if [ "$pwd_is_source_path" != "y" ] ; then
symlink "$source_path/dtc/Makefile" "dtc/Makefile"
symlink "$source_path/dtc/scripts" "dtc/scripts"
fi
fdt_cflags="-I\$(SRC_PATH)/dtc/libfdt"
fdt_libs="-L\$(BUILD_DIR)/dtc/libfdt $fdt_libs"
elif test "$fdt" = "yes" ; then
# have neither and want - prompt for system/submodule install
error_exit "DTC (libfdt) version >= 1.4.0 not present. Your options:" \
" (1) Preferred: Install the DTC (libfdt) devel package" \
" (2) Fetch the DTC submodule, using:" \
" git submodule update --init dtc"
else
# don't have and don't want
fdt_libs=
fdt=no
fi
fi
libs_softmmu="$libs_softmmu $fdt_libs"
##########################################
# opengl probe (for sdl2, gtk, milkymist-tmu2)
if test "$opengl" != "no" ; then
opengl_pkgs="epoxy libdrm gbm"
if $pkg_config $opengl_pkgs x11; then
opengl_cflags="$($pkg_config --cflags $opengl_pkgs) $x11_cflags"
opengl_libs="$($pkg_config --libs $opengl_pkgs) $x11_libs"
opengl=yes
if test "$gtk" = "yes" && $pkg_config --exists "$gtkpackage >= 3.16"; then
gtk_gl="yes"
fi
else
if test "$opengl" = "yes" ; then
feature_not_found "opengl" "Please install opengl (mesa) devel pkgs: $opengl_pkgs"
fi
opengl_cflags=""
opengl_libs=""
opengl=no
fi
fi
if test "$opengl" = "yes"; then
cat > $TMPC << EOF
#include <epoxy/egl.h>
#ifndef EGL_MESA_image_dma_buf_export
# error mesa/epoxy lacks support for dmabufs (mesa 10.6+)
#endif
int main(void) { return 0; }
EOF
if compile_prog "" "" ; then
opengl_dmabuf=yes
fi
fi
##########################################
# archipelago probe
if test "$archipelago" != "no" ; then
cat > $TMPC <<EOF
#include <stdio.h>
#include <xseg/xseg.h>
#include <xseg/protocol.h>
int main(void) {
xseg_initialize();
return 0;
}
EOF
archipelago_libs=-lxseg
if compile_prog "" "$archipelago_libs"; then
archipelago="yes"
libs_tools="$archipelago_libs $libs_tools"
libs_softmmu="$archipelago_libs $libs_softmmu"
echo "WARNING: Please check the licenses of QEMU and libxseg carefully."
echo "GPLv3 versions of libxseg may not be compatible with QEMU's"
echo "license and therefore prevent redistribution."
echo
echo "To disable Archipelago, use --disable-archipelago"
else
if test "$archipelago" = "yes" ; then
feature_not_found "Archipelago backend support" "Install libxseg devel"
fi
archipelago="no"
fi
fi
##########################################
# glusterfs probe
if test "$glusterfs" != "no" ; then
if $pkg_config --atleast-version=3 glusterfs-api; then
glusterfs="yes"
glusterfs_cflags=$($pkg_config --cflags glusterfs-api)
glusterfs_libs=$($pkg_config --libs glusterfs-api)
if $pkg_config --atleast-version=4 glusterfs-api; then
glusterfs_xlator_opt="yes"
fi
if $pkg_config --atleast-version=5 glusterfs-api; then
glusterfs_discard="yes"
fi
if $pkg_config --atleast-version=6 glusterfs-api; then
glusterfs_zerofill="yes"
fi
else
if test "$glusterfs" = "yes" ; then
feature_not_found "GlusterFS backend support" \
"Install glusterfs-api devel >= 3"
fi
glusterfs="no"
fi
fi
# Check for inotify functions when we are building linux-user
# emulator. This is done because older glibc versions don't
# have syscall stubs for these implemented. In that case we
# don't provide them even if kernel supports them.
#
inotify=no
cat > $TMPC << EOF
#include <sys/inotify.h>
int
main(void)
{
/* try to start inotify */
return inotify_init();
}
EOF
if compile_prog "" "" ; then
inotify=yes
fi
inotify1=no
cat > $TMPC << EOF
#include <sys/inotify.h>
int
main(void)
{
/* try to start inotify */
return inotify_init1(0);
}
EOF
if compile_prog "" "" ; then
inotify1=yes
fi
# check if utimensat and futimens are supported
utimens=no
cat > $TMPC << EOF
#define _ATFILE_SOURCE
#include <stddef.h>
#include <fcntl.h>
#include <sys/stat.h>
int main(void)
{
utimensat(AT_FDCWD, "foo", NULL, 0);
futimens(0, NULL);
return 0;
}
EOF
if compile_prog "" "" ; then
utimens=yes
fi
# check if pipe2 is there
pipe2=no
cat > $TMPC << EOF
#include <unistd.h>
#include <fcntl.h>
int main(void)
{
int pipefd[2];
return pipe2(pipefd, O_CLOEXEC);
}
EOF
if compile_prog "" "" ; then
pipe2=yes
fi
# check if accept4 is there
accept4=no
cat > $TMPC << EOF
#include <sys/socket.h>
#include <stddef.h>
int main(void)
{
accept4(0, NULL, NULL, SOCK_CLOEXEC);
return 0;
}
EOF
if compile_prog "" "" ; then
accept4=yes
fi
# check if tee/splice is there. vmsplice was added same time.
splice=no
cat > $TMPC << EOF
#include <unistd.h>
#include <fcntl.h>
#include <limits.h>
int main(void)
{
int len, fd = 0;
len = tee(STDIN_FILENO, STDOUT_FILENO, INT_MAX, SPLICE_F_NONBLOCK);
splice(STDIN_FILENO, NULL, fd, NULL, len, SPLICE_F_MOVE);
return 0;
}
EOF
if compile_prog "" "" ; then
splice=yes
fi
##########################################
# libnuma probe
if test "$numa" != "no" ; then
cat > $TMPC << EOF
#include <numa.h>
int main(void) { return numa_available(); }
EOF
if compile_prog "" "-lnuma" ; then
numa=yes
libs_softmmu="-lnuma $libs_softmmu"
else
if test "$numa" = "yes" ; then
feature_not_found "numa" "install numactl devel"
fi
numa=no
fi
fi
configure: Add support for jemalloc This adds "--enable-jemalloc" and "--disable-jemalloc" to allow linking to jemalloc memory allocator. We have already tcmalloc support, but it seem to not working well with a lot of iothreads/disks. The main problem is that tcmalloc use a shared thread cache of 16MB by default. With more threads, this cache is shared, and some bad garbage collections can occur if the cache is too low. It's possible to tcmalloc cache increase it with a env var: TCMALLOC_MAX_TOTAL_THREAD_CACHE_BYTES=256MB With default 16MB, performances are really bad with more than 2 disks. Increasing to 256MB, it's helping but still have problem with 16 disks/iothreads. Jemalloc don't have performance problem with default configuration. Here the benchmark results in iops of 1 qemu vm randread 4K iodepth=32, with rbd block backend (librbd is doing a lot of memory allocation), 1 iothread by disk glibc malloc ------------ 1 disk 29052 2 disks 55878 4 disks 127899 8 disks 240566 15 disks 269976 jemalloc -------- 1 disk 41278 2 disks 75781 4 disks 195351 8 disks 294241 15 disks 298199 tcmalloc 2.2.1 default 16M cache -------------------------------- 1 disk 37911 2 disks 67698 4 disks 41076 8 disks 43312 15 disks 37569 tcmalloc : 256M cache --------------------------- 1 disk 33914 2 disks 58839 4 disks 148205 8 disks 213298 15 disks 218383 Signed-off-by: Alexandre Derumier <aderumier@odiso.com> Message-Id: <1434711418-20429-1-git-send-email-aderumier@odiso.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-19 13:56:58 +03:00
if test "$tcmalloc" = "yes" && test "$jemalloc" = "yes" ; then
echo "ERROR: tcmalloc && jemalloc can't be used at the same time"
exit 1
fi
##########################################
# tcmalloc probe
if test "$tcmalloc" = "yes" ; then
cat > $TMPC << EOF
#include <stdlib.h>
int main(void) { malloc(1); return 0; }
EOF
if compile_prog "" "-ltcmalloc" ; then
LIBS="-ltcmalloc $LIBS"
else
feature_not_found "tcmalloc" "install gperftools devel"
fi
fi
configure: Add support for jemalloc This adds "--enable-jemalloc" and "--disable-jemalloc" to allow linking to jemalloc memory allocator. We have already tcmalloc support, but it seem to not working well with a lot of iothreads/disks. The main problem is that tcmalloc use a shared thread cache of 16MB by default. With more threads, this cache is shared, and some bad garbage collections can occur if the cache is too low. It's possible to tcmalloc cache increase it with a env var: TCMALLOC_MAX_TOTAL_THREAD_CACHE_BYTES=256MB With default 16MB, performances are really bad with more than 2 disks. Increasing to 256MB, it's helping but still have problem with 16 disks/iothreads. Jemalloc don't have performance problem with default configuration. Here the benchmark results in iops of 1 qemu vm randread 4K iodepth=32, with rbd block backend (librbd is doing a lot of memory allocation), 1 iothread by disk glibc malloc ------------ 1 disk 29052 2 disks 55878 4 disks 127899 8 disks 240566 15 disks 269976 jemalloc -------- 1 disk 41278 2 disks 75781 4 disks 195351 8 disks 294241 15 disks 298199 tcmalloc 2.2.1 default 16M cache -------------------------------- 1 disk 37911 2 disks 67698 4 disks 41076 8 disks 43312 15 disks 37569 tcmalloc : 256M cache --------------------------- 1 disk 33914 2 disks 58839 4 disks 148205 8 disks 213298 15 disks 218383 Signed-off-by: Alexandre Derumier <aderumier@odiso.com> Message-Id: <1434711418-20429-1-git-send-email-aderumier@odiso.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-19 13:56:58 +03:00
##########################################
# jemalloc probe
if test "$jemalloc" = "yes" ; then
cat > $TMPC << EOF
#include <stdlib.h>
int main(void) { malloc(1); return 0; }
EOF
if compile_prog "" "-ljemalloc" ; then
LIBS="-ljemalloc $LIBS"
else
feature_not_found "jemalloc" "install jemalloc devel"
fi
fi
##########################################
# signalfd probe
signalfd="no"
cat > $TMPC << EOF
#include <unistd.h>
#include <sys/syscall.h>
#include <signal.h>
int main(void) { return syscall(SYS_signalfd, -1, NULL, _NSIG / 8); }
EOF
if compile_prog "" "" ; then
signalfd=yes
fi
# check if eventfd is supported
eventfd=no
cat > $TMPC << EOF
#include <sys/eventfd.h>
int main(void)
{
return eventfd(0, EFD_NONBLOCK | EFD_CLOEXEC);
}
EOF
if compile_prog "" "" ; then
eventfd=yes
fi
# check if memfd is supported
memfd=no
cat > $TMPC << EOF
#include <sys/memfd.h>
int main(void)
{
return memfd_create("foo", MFD_ALLOW_SEALING);
}
EOF
if compile_prog "" "" ; then
memfd=yes
fi
# check for fallocate
fallocate=no
cat > $TMPC << EOF
#include <fcntl.h>
int main(void)
{
fallocate(0, 0, 0, 0);
return 0;
}
EOF
if compile_prog "" "" ; then
fallocate=yes
fi
# check for fallocate hole punching
fallocate_punch_hole=no
cat > $TMPC << EOF
#include <fcntl.h>
#include <linux/falloc.h>
int main(void)
{
fallocate(0, FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE, 0, 0);
return 0;
}
EOF
if compile_prog "" "" ; then
fallocate_punch_hole=yes
fi
# check that fallocate supports range zeroing inside the file
fallocate_zero_range=no
cat > $TMPC << EOF
#include <fcntl.h>
#include <linux/falloc.h>
int main(void)
{
fallocate(0, FALLOC_FL_ZERO_RANGE, 0, 0);
return 0;
}
EOF
if compile_prog "" "" ; then
fallocate_zero_range=yes
fi
# check for posix_fallocate
posix_fallocate=no
cat > $TMPC << EOF
#include <fcntl.h>
int main(void)
{
posix_fallocate(0, 0, 0);
return 0;
}
EOF
if compile_prog "" "" ; then
posix_fallocate=yes
fi
# check for sync_file_range
sync_file_range=no
cat > $TMPC << EOF
#include <fcntl.h>
int main(void)
{
sync_file_range(0, 0, 0, 0);
return 0;
}
EOF
if compile_prog "" "" ; then
sync_file_range=yes
fi
# check for linux/fiemap.h and FS_IOC_FIEMAP
fiemap=no
cat > $TMPC << EOF
#include <sys/ioctl.h>
#include <linux/fs.h>
#include <linux/fiemap.h>
int main(void)
{
ioctl(0, FS_IOC_FIEMAP, 0);
return 0;
}
EOF
if compile_prog "" "" ; then
fiemap=yes
fi
# check for dup3
dup3=no
cat > $TMPC << EOF
#include <unistd.h>
int main(void)
{
dup3(0, 0, 0);
return 0;
}
EOF
if compile_prog "" "" ; then
dup3=yes
fi
# check for ppoll support
ppoll=no
cat > $TMPC << EOF
#include <poll.h>
int main(void)
{
struct pollfd pfd = { .fd = 0, .events = 0, .revents = 0 };
ppoll(&pfd, 1, 0, 0);
return 0;
}
EOF
if compile_prog "" "" ; then
ppoll=yes
fi
# check for prctl(PR_SET_TIMERSLACK , ... ) support
prctl_pr_set_timerslack=no
cat > $TMPC << EOF
#include <sys/prctl.h>
int main(void)
{
prctl(PR_SET_TIMERSLACK, 1, 0, 0, 0);
return 0;
}
EOF
if compile_prog "" "" ; then
prctl_pr_set_timerslack=yes
fi
# check for epoll support
epoll=no
cat > $TMPC << EOF
#include <sys/epoll.h>
int main(void)
{
epoll_create(0);
return 0;
}
EOF
if compile_prog "" "" ; then
epoll=yes
fi
# epoll_create1 is a later addition
# so we must check separately for its presence
epoll_create1=no
cat > $TMPC << EOF
#include <sys/epoll.h>
int main(void)
{
/* Note that we use epoll_create1 as a value, not as
* a function being called. This is necessary so that on
* old SPARC glibc versions where the function was present in
* the library but not declared in the header file we will
* fail the configure check. (Otherwise we will get a compiler
* warning but not an error, and will proceed to fail the
* qemu compile where we compile with -Werror.)
*/
return (int)(uintptr_t)&epoll_create1;
}
EOF
if compile_prog "" "" ; then
epoll_create1=yes
fi
# check for sendfile support
sendfile=no
cat > $TMPC << EOF
#include <sys/sendfile.h>
int main(void)
{
return sendfile(0, 0, 0, 0);
}
EOF
if compile_prog "" "" ; then
sendfile=yes
fi
# check for timerfd support (glibc 2.8 and newer)
timerfd=no
cat > $TMPC << EOF
#include <sys/timerfd.h>
int main(void)
{
return(timerfd_create(CLOCK_REALTIME, 0));
}
EOF
if compile_prog "" "" ; then
timerfd=yes
fi
# check for setns and unshare support
setns=no
cat > $TMPC << EOF
#include <sched.h>
int main(void)
{
int ret;
ret = setns(0, 0);
ret = unshare(0);
return ret;
}
EOF
if compile_prog "" "" ; then
setns=yes
fi
# Check if tools are available to build documentation.
if test "$docs" != "no" ; then
if has makeinfo && has pod2man; then
docs=yes
else
if test "$docs" = "yes" ; then
feature_not_found "docs" "Install texinfo and Perl/perl-podlators"
fi
docs=no
fi
fi
# Search for bswap_32 function
byteswap_h=no
cat > $TMPC << EOF
#include <byteswap.h>
int main(void) { return bswap_32(0); }
EOF
if compile_prog "" "" ; then
byteswap_h=yes
fi
# Search for bswap32 function
bswap_h=no
cat > $TMPC << EOF
#include <sys/endian.h>
#include <sys/types.h>
#include <machine/bswap.h>
int main(void) { return bswap32(0); }
EOF
if compile_prog "" "" ; then
bswap_h=yes
fi
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 12:24:24 +04:00
##########################################
# Do we have libiscsi >= 1.9.0
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 12:24:24 +04:00
if test "$libiscsi" != "no" ; then
if $pkg_config --atleast-version=1.9.0 libiscsi; then
libiscsi="yes"
libiscsi_cflags=$($pkg_config --cflags libiscsi)
libiscsi_libs=$($pkg_config --libs libiscsi)
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 12:24:24 +04:00
else
if test "$libiscsi" = "yes" ; then
feature_not_found "libiscsi" "Install libiscsi >= 1.9.0"
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 12:24:24 +04:00
fi
libiscsi="no"
fi
fi
##########################################
# Do we need libm
cat > $TMPC << EOF
#include <math.h>
int main(int argc, char **argv) { return isnan(sin((double)argc)); }
EOF
if compile_prog "" "" ; then
:
elif compile_prog "" "-lm" ; then
LIBS="-lm $LIBS"
libs_qga="-lm $libs_qga"
else
error_exit "libm check failed"
fi
##########################################
# Do we need librt
# uClibc provides 2 versions of clock_gettime(), one with realtime
# support and one without. This means that the clock_gettime() don't
# need -lrt. We still need it for timer_create() so we check for this
# function in addition.
cat > $TMPC <<EOF
#include <signal.h>
#include <time.h>
int main(void) {
timer_create(CLOCK_REALTIME, NULL, NULL);
return clock_gettime(CLOCK_REALTIME, NULL);
}
EOF
if compile_prog "" "" ; then
:
# we need pthread for static linking. use previous pthread test result
elif compile_prog "" "$pthread_lib -lrt" ; then
LIBS="$LIBS -lrt"
libs_qga="$libs_qga -lrt"
fi
if test "$darwin" != "yes" -a "$mingw32" != "yes" -a "$solaris" != yes -a \
"$aix" != "yes" -a "$haiku" != "yes" ; then
libs_softmmu="-lutil $libs_softmmu"
fi
##########################################
2010-03-24 12:26:51 +03:00
# spice probe
if test "$spice" != "no" ; then
cat > $TMPC << EOF
#include <spice.h>
int main(void) { spice_server_new(); return 0; }
EOF
spice_cflags=$($pkg_config --cflags spice-protocol spice-server 2>/dev/null)
spice_libs=$($pkg_config --libs spice-protocol spice-server 2>/dev/null)
if $pkg_config --atleast-version=0.12.0 spice-server && \
$pkg_config --atleast-version=0.12.3 spice-protocol && \
2010-03-24 12:26:51 +03:00
compile_prog "$spice_cflags" "$spice_libs" ; then
spice="yes"
libs_softmmu="$libs_softmmu $spice_libs"
QEMU_CFLAGS="$QEMU_CFLAGS $spice_cflags"
spice_protocol_version=$($pkg_config --modversion spice-protocol)
spice_server_version=$($pkg_config --modversion spice-server)
2010-03-24 12:26:51 +03:00
else
if test "$spice" = "yes" ; then
feature_not_found "spice" \
"Install spice-server(>=0.12.0) and spice-protocol(>=0.12.3) devel"
2010-03-24 12:26:51 +03:00
fi
spice="no"
fi
fi
# check for smartcard support
smartcard_cflags=""
if test "$smartcard" != "no"; then
if $pkg_config libcacard; then
libcacard_cflags=$($pkg_config --cflags libcacard)
libcacard_libs=$($pkg_config --libs libcacard)
QEMU_CFLAGS="$QEMU_CFLAGS $libcacard_cflags"
libs_softmmu="$libs_softmmu $libcacard_libs"
smartcard="yes"
else
if test "$smartcard" = "yes"; then
feature_not_found "smartcard" "Install libcacard devel"
libcacard: initial commit libcacard emulates a Common Access Card (CAC) which is a standard for smartcards. It is used by the emulated ccid card introduced in a following patch. Docs are available in docs/libcacard.txt Signed-off-by: Alon Levy <alevy@redhat.com> --- changes from v24->v25: * Fix out of tree builds. * Fix build with linux-user targets. changes from v23->v24: (Jes Sorensen review 2) * Makefile.target: use obj-$(CONFIG_*) += * remove unrequired includes, include qemu-common before qemu-thread * required adding #define NO_NSPR_10_SUPPORT (harmless) changes from v22->v23: * configure fixes: (reported by Stefan Hajnoczi) * test a = b, not a == b (second isn't portable) * quote $source_path in case it contains spaces - this doesn't really help since there are many other places that need similar fixes, not introduced by this patch. changes from v21->v22: * fix configure to not link libcacard if nss not found (reported by Stefan Hajnoczi) * fix vscclient linkage with simpletrace backend (reported by Stefan Hajnoczi) * card_7816.c: add missing break in ERROR_DATA_NOT_FOUND (reported by William van de Velde) changes from v20->v21: (Jes Sorensen review) * use qemu infrastructure: qemu-thread, qemu-common (qemu_malloc and qemu_free), error_report * assert instead of ASSERT * cosmetic fixes * use strpbrk and isspace * add --disable-nss --enable-nss here, instead of in the final patch. * split vscclient, passthru and docs to following patches. changes from v19->v20: * checkpatch.pl changes from v15->v16: Build: * don't erase self with distclean * fix make clean after make distclean * Makefile: make vscclient link quiet Behavioral: * vcard_emul_nss: load coolkey in more situations * vscclient: * use hton,ntoh * send init on connect, only start vevent thread on response * read payload after header check, before type switch * remove Reconnect * update for vscard_common changes, empty Flush implementation Style/Whitespace: * fix wrong variable usage * remove unused variable * use only C style comments * add copyright header * fix tabulation Signed-off-by: Alon Levy <alevy@redhat.com> libcacard: fix out of tree builds
2010-11-28 17:36:38 +03:00
fi
smartcard="no"
libcacard: initial commit libcacard emulates a Common Access Card (CAC) which is a standard for smartcards. It is used by the emulated ccid card introduced in a following patch. Docs are available in docs/libcacard.txt Signed-off-by: Alon Levy <alevy@redhat.com> --- changes from v24->v25: * Fix out of tree builds. * Fix build with linux-user targets. changes from v23->v24: (Jes Sorensen review 2) * Makefile.target: use obj-$(CONFIG_*) += * remove unrequired includes, include qemu-common before qemu-thread * required adding #define NO_NSPR_10_SUPPORT (harmless) changes from v22->v23: * configure fixes: (reported by Stefan Hajnoczi) * test a = b, not a == b (second isn't portable) * quote $source_path in case it contains spaces - this doesn't really help since there are many other places that need similar fixes, not introduced by this patch. changes from v21->v22: * fix configure to not link libcacard if nss not found (reported by Stefan Hajnoczi) * fix vscclient linkage with simpletrace backend (reported by Stefan Hajnoczi) * card_7816.c: add missing break in ERROR_DATA_NOT_FOUND (reported by William van de Velde) changes from v20->v21: (Jes Sorensen review) * use qemu infrastructure: qemu-thread, qemu-common (qemu_malloc and qemu_free), error_report * assert instead of ASSERT * cosmetic fixes * use strpbrk and isspace * add --disable-nss --enable-nss here, instead of in the final patch. * split vscclient, passthru and docs to following patches. changes from v19->v20: * checkpatch.pl changes from v15->v16: Build: * don't erase self with distclean * fix make clean after make distclean * Makefile: make vscclient link quiet Behavioral: * vcard_emul_nss: load coolkey in more situations * vscclient: * use hton,ntoh * send init on connect, only start vevent thread on response * read payload after header check, before type switch * remove Reconnect * update for vscard_common changes, empty Flush implementation Style/Whitespace: * fix wrong variable usage * remove unused variable * use only C style comments * add copyright header * fix tabulation Signed-off-by: Alon Levy <alevy@redhat.com> libcacard: fix out of tree builds
2010-11-28 17:36:38 +03:00
fi
fi
# check for libusb
if test "$libusb" != "no" ; then
if $pkg_config --atleast-version=1.0.13 libusb-1.0; then
libusb="yes"
libusb_cflags=$($pkg_config --cflags libusb-1.0)
libusb_libs=$($pkg_config --libs libusb-1.0)
QEMU_CFLAGS="$QEMU_CFLAGS $libusb_cflags"
libs_softmmu="$libs_softmmu $libusb_libs"
else
if test "$libusb" = "yes"; then
feature_not_found "libusb" "Install libusb devel >= 1.0.13"
fi
libusb="no"
fi
fi
# check for usbredirparser for usb network redirection support
if test "$usb_redir" != "no" ; then
if $pkg_config --atleast-version=0.6 libusbredirparser-0.5; then
usb_redir="yes"
usb_redir_cflags=$($pkg_config --cflags libusbredirparser-0.5)
usb_redir_libs=$($pkg_config --libs libusbredirparser-0.5)
QEMU_CFLAGS="$QEMU_CFLAGS $usb_redir_cflags"
libs_softmmu="$libs_softmmu $usb_redir_libs"
else
if test "$usb_redir" = "yes"; then
feature_not_found "usb-redir" "Install usbredir devel"
fi
usb_redir="no"
fi
fi
##########################################
# check if we have VSS SDK headers for win
if test "$mingw32" = "yes" -a "$guest_agent" != "no" -a "$vss_win32_sdk" != "no" ; then
case "$vss_win32_sdk" in
configure: mark qemu-ga VSS includes as system headers As of e4650c81, we do w32 builds with -Werror enabled. Unfortunately for cases where we enable VSS support in qemu-ga, we still have warnings generated by VSS includes that ship as part of the Microsoft VSS SDK. We can selectively address a number of these warnings using #pragma GCC diagnostic ignored ... but at least one of these: warning: ‘typedef’ was ignored in this declaration resulting from declarations of the form: typedef struct Blah { ... }; does not provide a specific command-line/pragma option to disable warnings of the sort. To allow VSS builds to succeed, the next-best option is disabling these warnings on a per-file basis. pragmas like #pragma GCC system_header can be used to declare subsequent includes/declarations as being exempt from normal warnings, but this must be done within a header file. Since we don't control the VSS SDK, we'd need to rely on a intermediate header include to accomplish this, and since different objects in the VSS link target rely on different headers from the VSS SDK, this would become somewhat of a rat's nest (though not totally unmanageable). The next step up in granularity is just marking the entire VSS SDK include path as system headers via -isystem. This is a bit more heavy-handed, but since this SDK hasn't changed since 2005, there's likely little to be gained from selectively disabling warnings anyway, so we implement that approach here. This fixes the -Werror failures in both the configure test and the qga build due to shared reliance on $vss_win32_include. For the same reason, this also enforces a new dependency on -isystem support in the C/C++ compiler when building QGA with VSS enabled. Cc: Thomas Huth <thuth@redhat.com> Cc: Stefan Weil <sw@weilnetz.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-06-29 01:31:49 +03:00
"") vss_win32_include="-isystem $source_path" ;;
*\ *) # The SDK is installed in "Program Files" by default, but we cannot
# handle path with spaces. So we symlink the headers into ".sdk/vss".
configure: mark qemu-ga VSS includes as system headers As of e4650c81, we do w32 builds with -Werror enabled. Unfortunately for cases where we enable VSS support in qemu-ga, we still have warnings generated by VSS includes that ship as part of the Microsoft VSS SDK. We can selectively address a number of these warnings using #pragma GCC diagnostic ignored ... but at least one of these: warning: ‘typedef’ was ignored in this declaration resulting from declarations of the form: typedef struct Blah { ... }; does not provide a specific command-line/pragma option to disable warnings of the sort. To allow VSS builds to succeed, the next-best option is disabling these warnings on a per-file basis. pragmas like #pragma GCC system_header can be used to declare subsequent includes/declarations as being exempt from normal warnings, but this must be done within a header file. Since we don't control the VSS SDK, we'd need to rely on a intermediate header include to accomplish this, and since different objects in the VSS link target rely on different headers from the VSS SDK, this would become somewhat of a rat's nest (though not totally unmanageable). The next step up in granularity is just marking the entire VSS SDK include path as system headers via -isystem. This is a bit more heavy-handed, but since this SDK hasn't changed since 2005, there's likely little to be gained from selectively disabling warnings anyway, so we implement that approach here. This fixes the -Werror failures in both the configure test and the qga build due to shared reliance on $vss_win32_include. For the same reason, this also enforces a new dependency on -isystem support in the C/C++ compiler when building QGA with VSS enabled. Cc: Thomas Huth <thuth@redhat.com> Cc: Stefan Weil <sw@weilnetz.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-06-29 01:31:49 +03:00
vss_win32_include="-isystem $source_path/.sdk/vss"
symlink "$vss_win32_sdk/inc" "$source_path/.sdk/vss/inc"
;;
configure: mark qemu-ga VSS includes as system headers As of e4650c81, we do w32 builds with -Werror enabled. Unfortunately for cases where we enable VSS support in qemu-ga, we still have warnings generated by VSS includes that ship as part of the Microsoft VSS SDK. We can selectively address a number of these warnings using #pragma GCC diagnostic ignored ... but at least one of these: warning: ‘typedef’ was ignored in this declaration resulting from declarations of the form: typedef struct Blah { ... }; does not provide a specific command-line/pragma option to disable warnings of the sort. To allow VSS builds to succeed, the next-best option is disabling these warnings on a per-file basis. pragmas like #pragma GCC system_header can be used to declare subsequent includes/declarations as being exempt from normal warnings, but this must be done within a header file. Since we don't control the VSS SDK, we'd need to rely on a intermediate header include to accomplish this, and since different objects in the VSS link target rely on different headers from the VSS SDK, this would become somewhat of a rat's nest (though not totally unmanageable). The next step up in granularity is just marking the entire VSS SDK include path as system headers via -isystem. This is a bit more heavy-handed, but since this SDK hasn't changed since 2005, there's likely little to be gained from selectively disabling warnings anyway, so we implement that approach here. This fixes the -Werror failures in both the configure test and the qga build due to shared reliance on $vss_win32_include. For the same reason, this also enforces a new dependency on -isystem support in the C/C++ compiler when building QGA with VSS enabled. Cc: Thomas Huth <thuth@redhat.com> Cc: Stefan Weil <sw@weilnetz.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-06-29 01:31:49 +03:00
*) vss_win32_include="-isystem $vss_win32_sdk"
esac
cat > $TMPC << EOF
#define __MIDL_user_allocate_free_DEFINED__
#include <inc/win2003/vss.h>
int main(void) { return VSS_CTX_BACKUP; }
EOF
if compile_prog "$vss_win32_include" "" ; then
guest_agent_with_vss="yes"
QEMU_CFLAGS="$QEMU_CFLAGS $vss_win32_include"
libs_qga="-lole32 -loleaut32 -lshlwapi -lstdc++ -Wl,--enable-stdcall-fixup $libs_qga"
qga_vss_provider="qga/vss-win32/qga-vss.dll qga/vss-win32/qga-vss.tlb"
else
if test "$vss_win32_sdk" != "" ; then
echo "ERROR: Please download and install Microsoft VSS SDK:"
echo "ERROR: http://www.microsoft.com/en-us/download/details.aspx?id=23490"
echo "ERROR: On POSIX-systems, you can extract the SDK headers by:"
echo "ERROR: scripts/extract-vsssdk-headers setup.exe"
echo "ERROR: The headers are extracted in the directory \`inc'."
feature_not_found "VSS support"
fi
guest_agent_with_vss="no"
fi
fi
##########################################
# lookup Windows platform SDK (if not specified)
# The SDK is needed only to build .tlb (type library) file of guest agent
# VSS provider from the source. It is usually unnecessary because the
# pre-compiled .tlb file is included.
if test "$mingw32" = "yes" -a "$guest_agent" != "no" -a "$guest_agent_with_vss" = "yes" ; then
if test -z "$win_sdk"; then
programfiles="$PROGRAMFILES"
test -n "$PROGRAMW6432" && programfiles="$PROGRAMW6432"
if test -n "$programfiles"; then
win_sdk=$(ls -d "$programfiles/Microsoft SDKs/Windows/v"* | tail -1) 2>/dev/null
else
feature_not_found "Windows SDK"
fi
elif test "$win_sdk" = "no"; then
win_sdk=""
fi
fi
##########################################
# check if mingw environment provides a recent ntddscsi.h
if test "$mingw32" = "yes" -a "$guest_agent" != "no"; then
cat > $TMPC << EOF
#include <windows.h>
#include <ntddscsi.h>
int main(void) {
#if !defined(IOCTL_SCSI_GET_ADDRESS)
#error Missing required ioctl definitions
#endif
SCSI_ADDRESS addr = { .Lun = 0, .TargetId = 0, .PathId = 0 };
return addr.Lun;
}
EOF
if compile_prog "" "" ; then
guest_agent_ntddscsi=yes
libs_qga="-lsetupapi $libs_qga"
fi
fi
##########################################
# virgl renderer probe
if test "$virglrenderer" != "no" ; then
cat > $TMPC << EOF
#include <virglrenderer.h>
int main(void) { virgl_renderer_poll(); return 0; }
EOF
virgl_cflags=$($pkg_config --cflags virglrenderer 2>/dev/null)
virgl_libs=$($pkg_config --libs virglrenderer 2>/dev/null)
if $pkg_config virglrenderer >/dev/null 2>&1 && \
compile_prog "$virgl_cflags" "$virgl_libs" ; then
virglrenderer="yes"
else
if test "$virglrenderer" = "yes" ; then
feature_not_found "virglrenderer"
fi
virglrenderer="no"
fi
fi
##########################################
# check if we have fdatasync
fdatasync=no
cat > $TMPC << EOF
#include <unistd.h>
int main(void) {
#if defined(_POSIX_SYNCHRONIZED_IO) && _POSIX_SYNCHRONIZED_IO > 0
return fdatasync(0);
#else
#error Not supported
#endif
}
EOF
if compile_prog "" "" ; then
fdatasync=yes
fi
Introduce qemu_madvise() vl.c has a Sun-specific hack to supply a prototype for madvise(), but the call site has apparently moved to arch_init.c. Haiku doesn't implement madvise() in favor of posix_madvise(). OpenBSD and Solaris 10 don't implement posix_madvise() but madvise(). MinGW implements neither. Check for madvise() and posix_madvise() in configure and supply qemu_madvise() as wrapper. Prefer madvise() over posix_madvise() due to flag availability. Convert all callers to use qemu_madvise() and QEMU_MADV_*. Note that on Solaris the warning is fixed by moving the madvise() prototype, not by qemu_madvise() itself. It helps with porting though, and it simplifies most call sites. v7 -> v8: * Some versions of MinGW have no sys/mman.h header. Reported by Blue Swirl. v6 -> v7: * Adopt madvise() rather than posix_madvise() semantics for returning errors. * Use EINVAL in place of ENOTSUP. v5 -> v6: * Replace two leftover instances of POSIX_MADV_NORMAL with QEMU_MADV_INVALID. Spotted by Blue Swirl. v4 -> v5: * Introduce QEMU_MADV_INVALID, suggested by Alexander Graf. Note that this relies on -1 not being a valid advice value. v3 -> v4: * Eliminate #ifdefs at qemu_advise() call sites. Requested by Blue Swirl. This will currently break the check in kvm-all.c by calling madvise() with a supported flag, which will not fail. Ideas/patches welcome. v2 -> v3: * Reuse the *_MADV_* defines for QEMU_MADV_*. Suggested by Alexander Graf. * Add configure check for madvise(), too. Add defines to Makefile, not QEMU_CFLAGS. Convert all callers, untested. Suggested by Blue Swirl. * Keep Solaris' madvise() prototype around. Pointed out by Alexander Graf. * Display configure check results. v1 -> v2: * Don't rely on posix_madvise() availability, add qemu_madvise(). Suggested by Blue Swirl. Signed-off-by: Andreas Färber <afaerber@opensolaris.org> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Alexander Graf <agraf@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-09-25 15:26:05 +04:00
##########################################
# check if we have madvise
madvise=no
cat > $TMPC << EOF
#include <sys/types.h>
#include <sys/mman.h>
#include <stddef.h>
Introduce qemu_madvise() vl.c has a Sun-specific hack to supply a prototype for madvise(), but the call site has apparently moved to arch_init.c. Haiku doesn't implement madvise() in favor of posix_madvise(). OpenBSD and Solaris 10 don't implement posix_madvise() but madvise(). MinGW implements neither. Check for madvise() and posix_madvise() in configure and supply qemu_madvise() as wrapper. Prefer madvise() over posix_madvise() due to flag availability. Convert all callers to use qemu_madvise() and QEMU_MADV_*. Note that on Solaris the warning is fixed by moving the madvise() prototype, not by qemu_madvise() itself. It helps with porting though, and it simplifies most call sites. v7 -> v8: * Some versions of MinGW have no sys/mman.h header. Reported by Blue Swirl. v6 -> v7: * Adopt madvise() rather than posix_madvise() semantics for returning errors. * Use EINVAL in place of ENOTSUP. v5 -> v6: * Replace two leftover instances of POSIX_MADV_NORMAL with QEMU_MADV_INVALID. Spotted by Blue Swirl. v4 -> v5: * Introduce QEMU_MADV_INVALID, suggested by Alexander Graf. Note that this relies on -1 not being a valid advice value. v3 -> v4: * Eliminate #ifdefs at qemu_advise() call sites. Requested by Blue Swirl. This will currently break the check in kvm-all.c by calling madvise() with a supported flag, which will not fail. Ideas/patches welcome. v2 -> v3: * Reuse the *_MADV_* defines for QEMU_MADV_*. Suggested by Alexander Graf. * Add configure check for madvise(), too. Add defines to Makefile, not QEMU_CFLAGS. Convert all callers, untested. Suggested by Blue Swirl. * Keep Solaris' madvise() prototype around. Pointed out by Alexander Graf. * Display configure check results. v1 -> v2: * Don't rely on posix_madvise() availability, add qemu_madvise(). Suggested by Blue Swirl. Signed-off-by: Andreas Färber <afaerber@opensolaris.org> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Alexander Graf <agraf@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-09-25 15:26:05 +04:00
int main(void) { return madvise(NULL, 0, MADV_DONTNEED); }
EOF
if compile_prog "" "" ; then
madvise=yes
fi
##########################################
# check if we have posix_madvise
posix_madvise=no
cat > $TMPC << EOF
#include <sys/mman.h>
#include <stddef.h>
Introduce qemu_madvise() vl.c has a Sun-specific hack to supply a prototype for madvise(), but the call site has apparently moved to arch_init.c. Haiku doesn't implement madvise() in favor of posix_madvise(). OpenBSD and Solaris 10 don't implement posix_madvise() but madvise(). MinGW implements neither. Check for madvise() and posix_madvise() in configure and supply qemu_madvise() as wrapper. Prefer madvise() over posix_madvise() due to flag availability. Convert all callers to use qemu_madvise() and QEMU_MADV_*. Note that on Solaris the warning is fixed by moving the madvise() prototype, not by qemu_madvise() itself. It helps with porting though, and it simplifies most call sites. v7 -> v8: * Some versions of MinGW have no sys/mman.h header. Reported by Blue Swirl. v6 -> v7: * Adopt madvise() rather than posix_madvise() semantics for returning errors. * Use EINVAL in place of ENOTSUP. v5 -> v6: * Replace two leftover instances of POSIX_MADV_NORMAL with QEMU_MADV_INVALID. Spotted by Blue Swirl. v4 -> v5: * Introduce QEMU_MADV_INVALID, suggested by Alexander Graf. Note that this relies on -1 not being a valid advice value. v3 -> v4: * Eliminate #ifdefs at qemu_advise() call sites. Requested by Blue Swirl. This will currently break the check in kvm-all.c by calling madvise() with a supported flag, which will not fail. Ideas/patches welcome. v2 -> v3: * Reuse the *_MADV_* defines for QEMU_MADV_*. Suggested by Alexander Graf. * Add configure check for madvise(), too. Add defines to Makefile, not QEMU_CFLAGS. Convert all callers, untested. Suggested by Blue Swirl. * Keep Solaris' madvise() prototype around. Pointed out by Alexander Graf. * Display configure check results. v1 -> v2: * Don't rely on posix_madvise() availability, add qemu_madvise(). Suggested by Blue Swirl. Signed-off-by: Andreas Färber <afaerber@opensolaris.org> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Alexander Graf <agraf@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-09-25 15:26:05 +04:00
int main(void) { return posix_madvise(NULL, 0, POSIX_MADV_DONTNEED); }
EOF
if compile_prog "" "" ; then
posix_madvise=yes
fi
##########################################
# check if we have posix_syslog
posix_syslog=no
cat > $TMPC << EOF
#include <syslog.h>
int main(void) { openlog("qemu", LOG_PID, LOG_DAEMON); syslog(LOG_INFO, "configure"); return 0; }
EOF
if compile_prog "" "" ; then
posix_syslog=yes
fi
##########################################
# check if trace backend exists
$python "$source_path/scripts/tracetool.py" "--backends=$trace_backends" --check-backends > /dev/null 2> /dev/null
if test "$?" -ne 0 ; then
error_exit "invalid trace backends" \
"Please choose supported trace backends."
fi
##########################################
# For 'ust' backend, test if ust headers are present
if have_backend "ust"; then
cat > $TMPC << EOF
#include <lttng/tracepoint.h>
int main(void) { return 0; }
EOF
if compile_prog "" "" ; then
if $pkg_config lttng-ust --exists; then
lttng_ust_libs=$($pkg_config --libs lttng-ust)
else
lttng_ust_libs="-llttng-ust"
fi
if $pkg_config liburcu-bp --exists; then
urcu_bp_libs=$($pkg_config --libs liburcu-bp)
else
urcu_bp_libs="-lurcu-bp"
fi
LIBS="$lttng_ust_libs $urcu_bp_libs $LIBS"
libs_qga="$lttng_ust_libs $urcu_bp_libs $libs_qga"
else
error_exit "Trace backend 'ust' missing lttng-ust header files"
fi
fi
Add a DTrace tracing backend targetted for SystemTAP compatability This introduces a new tracing backend that targets the SystemTAP implementation of DTrace userspace tracing. The core functionality should be applicable and standard across any DTrace implementation on Solaris, OS-X, *BSD, but the Makefile rules will likely need some small additional changes to cope with OS specific build requirements. This backend builds a little differently from the other tracing backends. Specifically there is no 'trace.c' file, because the 'dtrace' command line tool generates a '.o' file directly from the dtrace probe definition file. The probe definition is usually named with a '.d' extension but QEMU uses '.d' files for its external makefile dependancy tracking, so this uses '.dtrace' as the extension for the probe definition file. The 'tracetool' program gains the ability to generate a trace.h file for DTrace, and also to generate the trace.d file containing the dtrace probe definition. Example usage of a dtrace probe in systemtap looks like: probe process("qemu").mark("qemu_malloc") { printf("Malloc %d %p\n", $arg1, $arg2); } * .gitignore: Ignore trace-dtrace.* * Makefile: Extra rules for generating DTrace files * Makefile.obj: Don't build trace.o for DTrace, use trace-dtrace.o generated by 'dtrace' instead * tracetool: Support for generating DTrace data files Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-11-12 16:20:24 +03:00
##########################################
# For 'dtrace' backend, test if 'dtrace' command is present
if have_backend "dtrace"; then
Add a DTrace tracing backend targetted for SystemTAP compatability This introduces a new tracing backend that targets the SystemTAP implementation of DTrace userspace tracing. The core functionality should be applicable and standard across any DTrace implementation on Solaris, OS-X, *BSD, but the Makefile rules will likely need some small additional changes to cope with OS specific build requirements. This backend builds a little differently from the other tracing backends. Specifically there is no 'trace.c' file, because the 'dtrace' command line tool generates a '.o' file directly from the dtrace probe definition file. The probe definition is usually named with a '.d' extension but QEMU uses '.d' files for its external makefile dependancy tracking, so this uses '.dtrace' as the extension for the probe definition file. The 'tracetool' program gains the ability to generate a trace.h file for DTrace, and also to generate the trace.d file containing the dtrace probe definition. Example usage of a dtrace probe in systemtap looks like: probe process("qemu").mark("qemu_malloc") { printf("Malloc %d %p\n", $arg1, $arg2); } * .gitignore: Ignore trace-dtrace.* * Makefile: Extra rules for generating DTrace files * Makefile.obj: Don't build trace.o for DTrace, use trace-dtrace.o generated by 'dtrace' instead * tracetool: Support for generating DTrace data files Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-11-12 16:20:24 +03:00
if ! has 'dtrace' ; then
error_exit "dtrace command is not found in PATH $PATH"
Add a DTrace tracing backend targetted for SystemTAP compatability This introduces a new tracing backend that targets the SystemTAP implementation of DTrace userspace tracing. The core functionality should be applicable and standard across any DTrace implementation on Solaris, OS-X, *BSD, but the Makefile rules will likely need some small additional changes to cope with OS specific build requirements. This backend builds a little differently from the other tracing backends. Specifically there is no 'trace.c' file, because the 'dtrace' command line tool generates a '.o' file directly from the dtrace probe definition file. The probe definition is usually named with a '.d' extension but QEMU uses '.d' files for its external makefile dependancy tracking, so this uses '.dtrace' as the extension for the probe definition file. The 'tracetool' program gains the ability to generate a trace.h file for DTrace, and also to generate the trace.d file containing the dtrace probe definition. Example usage of a dtrace probe in systemtap looks like: probe process("qemu").mark("qemu_malloc") { printf("Malloc %d %p\n", $arg1, $arg2); } * .gitignore: Ignore trace-dtrace.* * Makefile: Extra rules for generating DTrace files * Makefile.obj: Don't build trace.o for DTrace, use trace-dtrace.o generated by 'dtrace' instead * tracetool: Support for generating DTrace data files Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-11-12 16:20:24 +03:00
fi
trace_backend_stap="no"
if has 'stap' ; then
trace_backend_stap="yes"
fi
Add a DTrace tracing backend targetted for SystemTAP compatability This introduces a new tracing backend that targets the SystemTAP implementation of DTrace userspace tracing. The core functionality should be applicable and standard across any DTrace implementation on Solaris, OS-X, *BSD, but the Makefile rules will likely need some small additional changes to cope with OS specific build requirements. This backend builds a little differently from the other tracing backends. Specifically there is no 'trace.c' file, because the 'dtrace' command line tool generates a '.o' file directly from the dtrace probe definition file. The probe definition is usually named with a '.d' extension but QEMU uses '.d' files for its external makefile dependancy tracking, so this uses '.dtrace' as the extension for the probe definition file. The 'tracetool' program gains the ability to generate a trace.h file for DTrace, and also to generate the trace.d file containing the dtrace probe definition. Example usage of a dtrace probe in systemtap looks like: probe process("qemu").mark("qemu_malloc") { printf("Malloc %d %p\n", $arg1, $arg2); } * .gitignore: Ignore trace-dtrace.* * Makefile: Extra rules for generating DTrace files * Makefile.obj: Don't build trace.o for DTrace, use trace-dtrace.o generated by 'dtrace' instead * tracetool: Support for generating DTrace data files Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-11-12 16:20:24 +03:00
fi
##########################################
# check and set a backend for coroutine
# We prefer ucontext, but it's not always possible. The fallback
# is sigcontext. gthread is not selectable except explicitly, because
# it is not functional enough to run QEMU proper. (It is occasionally
# useful for debugging purposes.) On Windows the only valid backend
# is the Windows-specific one.
ucontext_works=no
if test "$darwin" != "yes"; then
cat > $TMPC << EOF
#include <ucontext.h>
#ifdef __stub_makecontext
#error Ignoring glibc stub makecontext which will always fail
#endif
int main(void) { makecontext(0, 0, 0); return 0; }
EOF
if compile_prog "" "" ; then
ucontext_works=yes
fi
fi
if test "$coroutine" = ""; then
if test "$mingw32" = "yes"; then
coroutine=win32
elif test "$ucontext_works" = "yes"; then
coroutine=ucontext
else
coroutine=sigaltstack
fi
else
case $coroutine in
windows)
if test "$mingw32" != "yes"; then
error_exit "'windows' coroutine backend only valid for Windows"
fi
# Unfortunately the user visible backend name doesn't match the
# coroutine-*.c filename for this case, so we have to adjust it here.
coroutine=win32
;;
ucontext)
if test "$ucontext_works" != "yes"; then
feature_not_found "ucontext"
fi
;;
gthread|sigaltstack)
if test "$mingw32" = "yes"; then
error_exit "only the 'windows' coroutine backend is valid for Windows"
fi
;;
*)
error_exit "unknown coroutine backend $coroutine"
;;
esac
fi
if test "$coroutine_pool" = ""; then
if test "$coroutine" = "gthread"; then
coroutine_pool=no
else
coroutine_pool=yes
fi
fi
if test "$coroutine" = "gthread" -a "$coroutine_pool" = "yes"; then
error_exit "'gthread' coroutine backend does not support pool (use --disable-coroutine-pool)"
fi
##########################################
# check if we have open_by_handle_at
open_by_handle_at=no
cat > $TMPC << EOF
#include <fcntl.h>
#if !defined(AT_EMPTY_PATH)
# error missing definition
#else
int main(void) { struct file_handle fh; return open_by_handle_at(0, &fh, 0); }
#endif
EOF
if compile_prog "" "" ; then
open_by_handle_at=yes
fi
########################################
# check if we have linux/magic.h
linux_magic_h=no
cat > $TMPC << EOF
#include <linux/magic.h>
int main(void) {
return 0;
}
EOF
if compile_prog "" "" ; then
linux_magic_h=yes
fi
########################################
# check whether we can disable warning option with a pragma (this is needed
# to silence warnings in the headers of some versions of external libraries).
# This test has to be compiled with -Werror as otherwise an unknown pragma is
# only a warning.
#
# If we can't selectively disable warning in the code, disable -Werror so that
# the build doesn't fail anyway.
pragma_disable_unused_but_set=no
cat > $TMPC << EOF
#pragma GCC diagnostic push
#pragma GCC diagnostic ignored "-Wunused-but-set-variable"
#pragma GCC diagnostic ignored "-Wstrict-prototypes"
#pragma GCC diagnostic pop
int main(void) {
return 0;
}
EOF
if compile_prog "-Werror" "" ; then
pragma_diagnostic_available=yes
else
werror=no
fi
########################################
# check if we have valgrind/valgrind.h
valgrind_h=no
cat > $TMPC << EOF
#include <valgrind/valgrind.h>
int main(void) {
return 0;
}
EOF
if compile_prog "" "" ; then
valgrind_h=yes
fi
########################################
# check if environ is declared
has_environ=no
cat > $TMPC << EOF
#include <unistd.h>
int main(void) {
environ = 0;
return 0;
}
EOF
if compile_prog "" "" ; then
has_environ=yes
fi
########################################
# check if cpuid.h is usable.
cpuid_h=no
cat > $TMPC << EOF
#include <cpuid.h>
int main(void) {
unsigned a, b, c, d;
int max = __get_cpuid_max(0, 0);
if (max >= 1) {
__cpuid(1, a, b, c, d);
}
if (max >= 7) {
__cpuid_count(7, 0, a, b, c, d);
}
return 0;
}
EOF
if compile_prog "" "" ; then
cpuid_h=yes
fi
########################################
# check if __[u]int128_t is usable.
int128=no
cat > $TMPC << EOF
#if defined(__clang_major__) && defined(__clang_minor__)
# if ((__clang_major__ < 3) || (__clang_major__ == 3) && (__clang_minor__ < 2))
# error __int128_t does not work in CLANG before 3.2
# endif
#endif
__int128_t a;
__uint128_t b;
int main (void) {
a = a + b;
b = a * b;
a = a * a;
return 0;
}
EOF
if compile_prog "" "" ; then
int128=yes
fi
########################################
# check if getauxval is available.
getauxval=no
cat > $TMPC << EOF
#include <sys/auxv.h>
int main(void) {
return getauxval(AT_HWCAP) == 0;
}
EOF
if compile_prog "" "" ; then
getauxval=yes
fi
########################################
# check if ccache is interfering with
# semantic analysis of macros
unset CCACHE_CPP2
ccache_cpp2=no
cat > $TMPC << EOF
static const int Z = 1;
#define fn() ({ Z; })
#define TAUT(X) ((X) == Z)
#define PAREN(X, Y) (X == Y)
#define ID(X) (X)
int main(int argc, char *argv[])
{
int x = 0, y = 0;
x = ID(x);
x = fn();
fn();
if (PAREN(x, y)) return 0;
if (TAUT(Z)) return 0;
return 0;
}
EOF
if ! compile_object "-Werror"; then
ccache_cpp2=yes
fi
#################################################
# clang does not support glibc + FORTIFY_SOURCE.
if test "$fortify_source" != "no"; then
if echo | $cc -dM -E - | grep __clang__ > /dev/null 2>&1 ; then
fortify_source="no";
elif test -n "$cxx" &&
echo | $cxx -dM -E - | grep __clang__ >/dev/null 2>&1 ; then
fortify_source="no";
else
fortify_source="yes"
fi
fi
##########################################
# check if struct fsxattr is available via linux/fs.h
have_fsxattr=no
cat > $TMPC << EOF
#include <linux/fs.h>
struct fsxattr foo;
int main(void) {
return 0;
}
EOF
if compile_prog "" "" ; then
have_fsxattr=yes
fi
linux-user pull request for June 2016 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIVAwUAV1gdMrRIkN7ePJvAAQhLcg/+Kby99taEuewItrA1yDs75jxOlLqaJopd cVzo4LFRFPhIn4UEKqRQS0CGoIeU/DYOmObvuUzJxs2LyUoHoqmQOwEm5obC2a85 JrHo/NOppYBbyvvIEAAXzZDCZo0KZKVclrlT+AX5obpOSNSvAnKvEuLWq1aQ9WGN n4AzHuFEl885cd4nFd8VK/xth89bqz6U/z8CjgIuw3mczp1XNrK5IJJwAy5epHay GCBr9XHooW3SU971WS20RTRS0D33tKPHgCU3ZeZ3rKh4g3JNj6/ixdVgzi9NqFsQ 5DzAj/iBGhN1LtCOednRS6tUt32Bhy8G/g4O3GiXdejagAmNe2wz31cveNJ8S3W5 DK8SZAnJlz06zN5uIpOVQgDOqfXZkCp7ndq779QJoHOAnuOjJBcUbhw1myz2R3eR 6208tStWl3R0+ATEK8CZ7ejg1cUHvdzyqGJA+1nC2HaFUrBWipxN8jf2fz9vO/wG G7zNbahvVgyJWO7bPNK4mxkb6qkWCETnCnLJsq2ZbmtPEMcINjD8vNWLNvFGVG8b 2HbinDrzh0Z9Zik5gLZfiVyP5HFaWSrJn9QRVIgaUjuIH9n3/25sl9OvW/JLjxJ+ h2P17CLnAK6dhUYc4R3wQTx2X/N2FvO4DD8iMYOcgDY6fhZ2b6EEyE9yBgQrIDbF gU1AlC/CX+M= =AXqa -----END PGP SIGNATURE----- Merge remote-tracking branch 'remotes/riku/tags/pull-linux-user-20160608' into staging linux-user pull request for June 2016 # gpg: Signature made Wed 08 Jun 2016 14:27:14 BST # gpg: using RSA key 0xB44890DEDE3C9BC0 # gpg: Good signature from "Riku Voipio <riku.voipio@iki.fi>" # gpg: aka "Riku Voipio <riku.voipio@linaro.org>" * remotes/riku/tags/pull-linux-user-20160608: (44 commits) linux-user: In fork_end(), remove correct CPUs from CPU list linux-user: Special-case ERESTARTSYS in target_strerror() linux-user: Make target_strerror() return 'const char *' linux-user: Correct signedness of target_flock l_start and l_len fields linux-user: Use safe_syscall wrapper for ioctl linux-user: Use safe_syscall wrapper for accept and accept4 syscalls linux-user: Use safe_syscall wrapper for semop linux-user: Use safe_syscall wrapper for epoll_wait syscalls linux-user: Use safe_syscall wrapper for poll and ppoll syscalls linux-user: Use safe_syscall wrapper for sleep syscalls linux-user: Use safe_syscall wrapper for rt_sigtimedwait syscall linux-user: Use safe_syscall wrapper for flock linux-user: Use safe_syscall wrapper for mq_timedsend and mq_timedreceive linux-user: Use safe_syscall wrapper for msgsnd and msgrcv linux-user: Use safe_syscall wrapper for send* and recv* syscalls linux-user: Use safe_syscall wrapper for connect syscall linux-user: Use safe_syscall wrapper for readv and writev syscalls linux-user: Fix error conversion in 64-bit fadvise syscall linux-user: Fix NR_fadvise64 and NR_fadvise64_64 for 32-bit guests linux-user: Fix handling of arm_fadvise64_64 syscall ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Conflicts: configure scripts/qemu-binfmt-conf.sh
2016-06-08 20:34:32 +03:00
##########################################
# check if rtnetlink.h exists and is useful
have_rtnetlink=no
cat > $TMPC << EOF
#include <linux/rtnetlink.h>
int main(void) {
return IFLA_PROTO_DOWN;
}
EOF
if compile_prog "" "" ; then
have_rtnetlink=yes
fi
#################################################
# Sparc implicitly links with --relax, which is
# incompatible with -r, so --no-relax should be
# given. It does no harm to give it on other
# platforms too.
# Note: the prototype is needed since QEMU_CFLAGS
# contains -Wmissing-prototypes
cat > $TMPC << EOF
extern int foo(void);
int foo(void) { return 0; }
EOF
if ! compile_object ""; then
error_exit "Failed to compile object file for LD_REL_FLAGS test"
fi
if do_cc -nostdlib -Wl,-r -Wl,--no-relax -o $TMPMO $TMPO; then
LD_REL_FLAGS="-Wl,--no-relax"
fi
##########################################
# End of CC checks
# After here, no more $cc or $ld runs
if test "$gcov" = "yes" ; then
CFLAGS="-fprofile-arcs -ftest-coverage -g $CFLAGS"
LDFLAGS="-fprofile-arcs -ftest-coverage $LDFLAGS"
elif test "$fortify_source" = "yes" ; then
CFLAGS="-O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 $CFLAGS"
elif test "$debug" = "no"; then
CFLAGS="-O2 $CFLAGS"
fi
##########################################
# Do we have libnfs
if test "$libnfs" != "no" ; then
if $pkg_config --atleast-version=1.9.3 libnfs; then
libnfs="yes"
libnfs_libs=$($pkg_config --libs libnfs)
else
if test "$libnfs" = "yes" ; then
feature_not_found "libnfs" "Install libnfs devel >= 1.9.3"
fi
libnfs="no"
fi
fi
# Now we've finished running tests it's OK to add -Werror to the compiler flags
if test "$werror" = "yes"; then
QEMU_CFLAGS="-Werror $QEMU_CFLAGS"
fi
if test "$solaris" = "no" ; then
if $ld --version 2>/dev/null | grep "GNU ld" >/dev/null 2>/dev/null ; then
LDFLAGS="-Wl,--warn-common $LDFLAGS"
fi
fi
# test if pod2man has --utf8 option
if pod2man --help | grep -q utf8; then
POD2MAN="pod2man --utf8"
else
POD2MAN="pod2man"
fi
# Use ASLR, no-SEH and DEP if available
if test "$mingw32" = "yes" ; then
for flag in --dynamicbase --no-seh --nxcompat; do
if $ld --help 2>/dev/null | grep ".$flag" >/dev/null 2>/dev/null ; then
LDFLAGS="-Wl,$flag $LDFLAGS"
fi
done
fi
qemu_confdir=$sysconfdir$confsuffix
qemu_moddir=$libdir$confsuffix
qemu_datadir=$datadir$confsuffix
qemu_localedir="$datadir/locale"
tools=""
if test "$want_tools" = "yes" ; then
tools="qemu-img\$(EXESUF) qemu-io\$(EXESUF) $tools"
if [ "$linux" = "yes" -o "$bsd" = "yes" -o "$solaris" = "yes" ] ; then
tools="qemu-nbd\$(EXESUF) $tools"
tools="ivshmem-client\$(EXESUF) ivshmem-server\$(EXESUF) $tools"
fi
fi
if test "$softmmu" = yes ; then
if test "$virtfs" != no ; then
if test "$cap" = yes && test "$linux" = yes && test "$attr" = yes ; then
virtfs=yes
tools="$tools fsdev/virtfs-proxy-helper\$(EXESUF)"
else
if test "$virtfs" = yes; then
error_exit "VirtFS is supported only on Linux and requires libcap devel and libattr devel"
fi
virtfs=no
fi
fi
fi
# Probe for guest agent support/options
if [ "$guest_agent" != "no" ]; then
qemu-ga: Add Windows VSS provider and requester as DLL Adds VSS provider and requester as a qga-vss.dll, which is loaded by Windows VSS service as well as by qemu-ga. "provider.cpp" implements a basic stub of a software VSS provider. Currently, this module only relays a frozen event from VSS service to the agent, and thaw event from the agent to VSS service, to block VSS process to keep the system frozen while snapshots are taken at the host. To register the provider to the guest system as COM+ application, the type library (.tlb) for qga-vss.dll is required. To build it from COM IDL (.idl), VisualC++, MIDL and stdole2.tlb in Windows SDK are required. This patch also adds pre-compiled .tlb file in the repository in order to enable cross-compile qemu-ga.exe for Windows with VSS support. "requester.cpp" provides the VSS requester to kick the VSS snapshot process. Qemu-ga.exe works without the DLL, although fsfreeze features are disabled. These functions are only supported in Windows 2003 or later. In older systems, fsfreeze features are disabled. In several versions of Windows which don't support attribute VSS_VOLSNAP_ATTR_NO_AUTORECOVERY, DoSnapshotSet fails with error VSS_E_OBJECT_NOT_FOUND. In this patch, we just ignore this error. To solve this fundamentally, we need a framework to handle mount writable snapshot on guests, which is required by VSS auto-recovery feature (cleanup phase after a snapshot is taken). Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2013-08-07 19:40:18 +04:00
if [ "$linux" = "yes" -o "$bsd" = "yes" -o "$solaris" = "yes" -o "$mingw32" = "yes" ] ; then
build: qemu-ga: add 'qemu-ga' build target for w32 Currently POSIX builds rely on 'qemu-ga' target to do qga-only distributable build. On w32, as with most standalone binary targets, we rely on 'qemu-ga.exe' target. Unlike with POSIX, qemu-ga for w32 has a number of related targets such as VSS DLL and MSI package. We can do the full distributable qga-only build on w32 with: make qemu-ga.exe or: make msi To make that work, we tie VSS dependencies onto qemu-ga.exe. However, in reality the DLL isn't part of the binary, so we use a filter to pull them out of the LINK recipe, which attempts to link against prereqs for binary targets. Additionally, it could be argued that VSS is a separate distributable, and shouldn't be implied by qemu-ga.exe binary target. To avoid this, we can tie the VSS dependencies only to the 'msi' target, but that would make it impossible to do a qga-only build of the w32 distributable without building the 'msi' package, which was supported in the past. An alternative approach is to add a new target to build the whole distributable. w32 allows us to use the same build target we use on POSIX, 'qemu-ga', since the current binary-only target on w32 is 'qemu-ga.exe'. To further simplify the build, we also make 'qemu-ga' build the MSI package if the appropriate ./configure options are set, making the full qga-only build the same on both POSIX and w32: `make qemu-ga` Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-09-08 02:47:05 +03:00
tools="qemu-ga $tools"
guest_agent=yes
elif [ "$guest_agent" != yes ]; then
guest_agent=no
else
error_exit "Guest agent is not supported on this platform"
fi
fi
# Guest agent Window MSI package
if test "$guest_agent" != yes; then
if test "$guest_agent_msi" = yes; then
error_exit "MSI guest agent package requires guest agent enabled"
fi
guest_agent_msi=no
elif test "$mingw32" != "yes"; then
if test "$guest_agent_msi" = "yes"; then
error_exit "MSI guest agent package is available only for MinGW Windows cross-compilation"
fi
guest_agent_msi=no
elif ! has wixl; then
if test "$guest_agent_msi" = "yes"; then
error_exit "MSI guest agent package requires wixl tool installed ( usually from msitools package )"
fi
guest_agent_msi=no
else
# we support qemu-ga, mingw32, and wixl: default to MSI enabled if it wasn't
# disabled explicitly
if test "$guest_agent_msi" != "no"; then
guest_agent_msi=yes
fi
fi
if test "$guest_agent_msi" = "yes"; then
if test "$guest_agent_with_vss" = "yes"; then
QEMU_GA_MSI_WITH_VSS="-D InstallVss"
fi
if test "$QEMU_GA_MANUFACTURER" = ""; then
QEMU_GA_MANUFACTURER=QEMU
fi
if test "$QEMU_GA_DISTRO" = ""; then
QEMU_GA_DISTRO=Linux
fi
if test "$QEMU_GA_VERSION" = ""; then
QEMU_GA_VERSION=$(cat $source_path/VERSION)
fi
QEMU_GA_MSI_MINGW_DLL_PATH="-D Mingw_dlls=$($pkg_config --variable=prefix glib-2.0)/bin"
case "$cpu" in
x86_64)
QEMU_GA_MSI_ARCH="-a x64 -D Arch=64"
;;
i386)
QEMU_GA_MSI_ARCH="-D Arch=32"
;;
*)
error_exit "CPU $cpu not supported for building installation package"
;;
esac
fi
# Mac OS X ships with a broken assembler
roms=
if test \( "$cpu" = "i386" -o "$cpu" = "x86_64" \) -a \
"$targetos" != "Darwin" -a "$targetos" != "SunOS" -a \
"$softmmu" = yes ; then
# Different host OS linkers have different ideas about the name of the ELF
# emulation. Linux and OpenBSD use 'elf_i386'; FreeBSD uses the _fbsd
# variant; and Windows uses i386pe.
for emu in elf_i386 elf_i386_fbsd i386pe; do
if "$ld" -verbose 2>&1 | grep -q "^[[:space:]]*$emu[[:space:]]*$"; then
ld_i386_emulation="$emu"
roms="optionrom"
break
fi
done
fi
if test "$cpu" = "ppc64" -a "$targetos" != "Darwin" ; then
roms="$roms spapr-rtas"
fi
if test "$cpu" = "s390x" ; then
roms="$roms s390-ccw"
fi
# Probe for the need for relocating the user-only binary.
if ( [ "$linux_user" = yes ] || [ "$bsd_user" = yes ] ) && [ "$pie" = no ]; then
textseg_addr=
case "$cpu" in
arm | i386 | ppc* | s390* | sparc* | x86_64 | x32)
# ??? Rationale for choosing this address
textseg_addr=0x60000000
;;
mips)
# A 256M aligned address, high in the address space, with enough
# room for the code_gen_buffer above it before the stack.
textseg_addr=0x60000000
;;
esac
if [ -n "$textseg_addr" ]; then
cat > $TMPC <<EOF
int main(void) { return 0; }
EOF
textseg_ldflags="-Wl,-Ttext-segment=$textseg_addr"
if ! compile_prog "" "$textseg_ldflags"; then
# In case ld does not support -Ttext-segment, edit the default linker
# script via sed to set the .text start addr. This is needed on FreeBSD
# at least.
if ! $ld --verbose >/dev/null 2>&1; then
error_exit \
"We need to link the QEMU user mode binaries at a" \
"specific text address. Unfortunately your linker" \
"doesn't support either the -Ttext-segment option or" \
"printing the default linker script with --verbose." \
"If you don't want the user mode binaries, pass the" \
"--disable-user option to configure."
fi
$ld --verbose | sed \
-e '1,/==================================================/d' \
-e '/==================================================/,$d' \
-e "s/[.] = [0-9a-fx]* [+] SIZEOF_HEADERS/. = $textseg_addr + SIZEOF_HEADERS/" \
-e "s/__executable_start = [0-9a-fx]*/__executable_start = $textseg_addr/" > config-host.ld
textseg_ldflags="-Wl,-T../config-host.ld"
fi
fi
fi
echo_version() {
if test "$1" = "yes" ; then
echo "($2)"
fi
}
# prepend pixman and ftd flags after all config tests are done
QEMU_CFLAGS="$pixman_cflags $fdt_cflags $QEMU_CFLAGS"
libs_softmmu="$pixman_libs $libs_softmmu"
echo "Install prefix $prefix"
echo "BIOS directory $(eval echo $qemu_datadir)"
echo "binary directory $(eval echo $bindir)"
echo "library directory $(eval echo $libdir)"
echo "module directory $(eval echo $qemu_moddir)"
echo "libexec directory $(eval echo $libexecdir)"
echo "include directory $(eval echo $includedir)"
echo "config directory $(eval echo $sysconfdir)"
if test "$mingw32" = "no" ; then
echo "local state directory $(eval echo $local_statedir)"
echo "Manual directory $(eval echo $mandir)"
echo "ELF interp prefix $interp_prefix"
else
echo "local state directory queried at runtime"
echo "Windows SDK $win_sdk"
fi
echo "Source path $source_path"
echo "C compiler $cc"
echo "Host C compiler $host_cc"
echo "C++ compiler $cxx"
echo "Objective-C compiler $objcc"
echo "ARFLAGS $ARFLAGS"
echo "CFLAGS $CFLAGS"
echo "QEMU_CFLAGS $QEMU_CFLAGS"
echo "LDFLAGS $LDFLAGS"
echo "make $make"
echo "install $install"
echo "python $python"
if test "$slirp" = "yes" ; then
echo "smbd $smbd"
fi
echo "module support $modules"
echo "host CPU $cpu"
echo "host big endian $bigendian"
echo "target list $target_list"
echo "tcg debug enabled $debug_tcg"
echo "gprof enabled $gprof"
echo "sparse enabled $sparse"
echo "strip binaries $strip_opt"
echo "profiler $profiler"
echo "static build $static"
if test "$darwin" = "yes" ; then
echo "Cocoa support $cocoa"
fi
echo "pixman $pixman"
echo "SDL support $sdl $(echo_version $sdl $sdlversion)"
echo "GTK support $gtk $(echo_version $gtk $gtk_version)"
echo "GTK GL support $gtk_gl"
echo "VTE support $vte $(echo_version $vte $vteversion)"
echo "TLS priority $tls_priority"
echo "GNUTLS support $gnutls"
echo "GNUTLS rnd $gnutls_rnd"
echo "libgcrypt $gcrypt"
echo "libgcrypt kdf $gcrypt_kdf"
echo "nettle $nettle $(echo_version $nettle $nettle_version)"
echo "nettle kdf $nettle_kdf"
echo "libtasn1 $tasn1"
echo "curses support $curses"
echo "virgl support $virglrenderer"
echo "curl support $curl"
echo "mingw32 support $mingw32"
echo "Audio drivers $audio_drv_list"
echo "Block whitelist (rw) $block_drv_rw_whitelist"
echo "Block whitelist (ro) $block_drv_ro_whitelist"
echo "VirtFS support $virtfs"
echo "VNC support $vnc"
if test "$vnc" = "yes" ; then
echo "VNC SASL support $vnc_sasl"
echo "VNC JPEG support $vnc_jpeg"
echo "VNC PNG support $vnc_png"
fi
if test -n "$sparc_cpu"; then
echo "Target Sparc Arch $sparc_cpu"
fi
echo "xen support $xen"
if test "$xen" = "yes" ; then
echo "xen ctrl version $xen_ctrl_version"
echo "pv dom build $xen_pv_domain_build"
fi
echo "brlapi support $brlapi"
echo "bluez support $bluez"
echo "Documentation $docs"
echo "PIE $pie"
echo "vde support $vde"
echo "netmap support $netmap"
echo "Linux AIO support $linux_aio"
echo "ATTR/XATTR support $attr"
echo "Install blobs $blobs"
echo "KVM support $kvm"
echo "RDMA support $rdma"
echo "TCG interpreter $tcg_interpreter"
echo "fdt support $fdt"
echo "preadv support $preadv"
echo "fdatasync $fdatasync"
Introduce qemu_madvise() vl.c has a Sun-specific hack to supply a prototype for madvise(), but the call site has apparently moved to arch_init.c. Haiku doesn't implement madvise() in favor of posix_madvise(). OpenBSD and Solaris 10 don't implement posix_madvise() but madvise(). MinGW implements neither. Check for madvise() and posix_madvise() in configure and supply qemu_madvise() as wrapper. Prefer madvise() over posix_madvise() due to flag availability. Convert all callers to use qemu_madvise() and QEMU_MADV_*. Note that on Solaris the warning is fixed by moving the madvise() prototype, not by qemu_madvise() itself. It helps with porting though, and it simplifies most call sites. v7 -> v8: * Some versions of MinGW have no sys/mman.h header. Reported by Blue Swirl. v6 -> v7: * Adopt madvise() rather than posix_madvise() semantics for returning errors. * Use EINVAL in place of ENOTSUP. v5 -> v6: * Replace two leftover instances of POSIX_MADV_NORMAL with QEMU_MADV_INVALID. Spotted by Blue Swirl. v4 -> v5: * Introduce QEMU_MADV_INVALID, suggested by Alexander Graf. Note that this relies on -1 not being a valid advice value. v3 -> v4: * Eliminate #ifdefs at qemu_advise() call sites. Requested by Blue Swirl. This will currently break the check in kvm-all.c by calling madvise() with a supported flag, which will not fail. Ideas/patches welcome. v2 -> v3: * Reuse the *_MADV_* defines for QEMU_MADV_*. Suggested by Alexander Graf. * Add configure check for madvise(), too. Add defines to Makefile, not QEMU_CFLAGS. Convert all callers, untested. Suggested by Blue Swirl. * Keep Solaris' madvise() prototype around. Pointed out by Alexander Graf. * Display configure check results. v1 -> v2: * Don't rely on posix_madvise() availability, add qemu_madvise(). Suggested by Blue Swirl. Signed-off-by: Andreas Färber <afaerber@opensolaris.org> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Alexander Graf <agraf@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-09-25 15:26:05 +04:00
echo "madvise $madvise"
echo "posix_madvise $posix_madvise"
echo "libcap-ng support $cap_ng"
echo "vhost-net support $vhost_net"
vhost-scsi: new device supporting the tcm_vhost Linux kernel module The WWPN specified in configfs is passed to "-device vhost-scsi-pci". The tgpt field of the SET_ENDPOINT ioctl is obsolete now, so it is not available from the QEMU command-line. Instead, I hardcode it to zero. Changes in Patch-v2: - Add vhost_scsi_get_features() in order to determine feature bits supports by host kernel (mst + nab) - Re-enable usage of DEFINE_VIRTIO_COMMON_FEATURES, and allow EVENT_IDX to be disabled by host in vhost_scsi_get_features() - Drop unused hotplug bit in DEFINE_VHOST_SCSI_PROPERTIES Changes in Patch-v1: - Set event_idx=off by default (nab, thanks asias) - Disable hotplug feature bit for v3.9 tcm_vhost kernel code, need to re-enable in v3.10 (nab) - Update to latest qemu.git/master HEAD Changes in WIP-V3: - Drop ioeventfd vhost_scsi_properties (asias, thanks stefanha) - Add CONFIG_VHOST_SCSI (asias, thanks stefanha) - Add hotplug feature bit Changes in WIP-V2: - Add backend guest masking support (nab) - Bump ABI_VERSION to 1 (nab) - Set up set_guest_notifiers (asias) - Set up vs->dev.vq_index (asias) - Drop vs->vs.vdev.{set,clear}_vhost_endpoint (asias) - Drop VIRTIO_CONFIG_S_DRIVER check in vhost_scsi_set_status (asias) Howto: Use the latest seabios, at least commit b44a7be17b git clone git://git.seabios.org/seabios.git make cp out/bios.bin /usr/share/qemu/bios.bin qemu -device vhost-scsi-pci,wwpn=naa.6001405bd4e8476d,event_idx=off ... Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Asias He <asias@redhat.com> [ Rebase on top of VirtIOSCSICommon patch, fix bugs in feature negotiation and irqfd masking - Paolo ] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-29 05:08:16 +04:00
echo "vhost-scsi support $vhost_scsi"
echo "vhost-vsock support $vhost_vsock"
echo "Trace backends $trace_backends"
if have_backend "simple"; then
echo "Trace output file $trace_file-<pid>"
fi
echo "spice support $spice $(echo_version $spice $spice_protocol_version/$spice_server_version)"
echo "rbd support $rbd"
echo "xfsctl support $xfs"
echo "smartcard support $smartcard"
echo "libusb $libusb"
echo "usb net redir $usb_redir"
echo "OpenGL support $opengl"
echo "OpenGL dmabufs $opengl_dmabuf"
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 12:24:24 +04:00
echo "libiscsi support $libiscsi"
echo "libnfs support $libnfs"
echo "build guest agent $guest_agent"
echo "QGA VSS support $guest_agent_with_vss"
echo "QGA w32 disk info $guest_agent_ntddscsi"
echo "QGA MSI support $guest_agent_msi"
echo "seccomp support $seccomp"
echo "coroutine backend $coroutine"
echo "coroutine pool $coroutine_pool"
echo "GlusterFS support $glusterfs"
echo "Archipelago support $archipelago"
echo "gcov $gcov_tool"
echo "gcov enabled $gcov"
echo "TPM support $tpm"
echo "libssh2 support $libssh2"
echo "TPM passthrough $tpm_passthrough"
echo "QOM debugging $qom_cast_debug"
echo "lzo support $lzo"
echo "snappy support $snappy"
echo "bzip2 support $bzip2"
echo "NUMA host support $numa"
echo "tcmalloc support $tcmalloc"
configure: Add support for jemalloc This adds "--enable-jemalloc" and "--disable-jemalloc" to allow linking to jemalloc memory allocator. We have already tcmalloc support, but it seem to not working well with a lot of iothreads/disks. The main problem is that tcmalloc use a shared thread cache of 16MB by default. With more threads, this cache is shared, and some bad garbage collections can occur if the cache is too low. It's possible to tcmalloc cache increase it with a env var: TCMALLOC_MAX_TOTAL_THREAD_CACHE_BYTES=256MB With default 16MB, performances are really bad with more than 2 disks. Increasing to 256MB, it's helping but still have problem with 16 disks/iothreads. Jemalloc don't have performance problem with default configuration. Here the benchmark results in iops of 1 qemu vm randread 4K iodepth=32, with rbd block backend (librbd is doing a lot of memory allocation), 1 iothread by disk glibc malloc ------------ 1 disk 29052 2 disks 55878 4 disks 127899 8 disks 240566 15 disks 269976 jemalloc -------- 1 disk 41278 2 disks 75781 4 disks 195351 8 disks 294241 15 disks 298199 tcmalloc 2.2.1 default 16M cache -------------------------------- 1 disk 37911 2 disks 67698 4 disks 41076 8 disks 43312 15 disks 37569 tcmalloc : 256M cache --------------------------- 1 disk 33914 2 disks 58839 4 disks 148205 8 disks 213298 15 disks 218383 Signed-off-by: Alexandre Derumier <aderumier@odiso.com> Message-Id: <1434711418-20429-1-git-send-email-aderumier@odiso.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-19 13:56:58 +03:00
echo "jemalloc support $jemalloc"
echo "avx2 optimization $avx2_opt"
echo "replication support $replication"
if test "$sdl_too_old" = "yes"; then
echo "-> Your SDL version is too old - please upgrade to have SDL support"
fi
config_host_mak="config-host.mak"
echo "# Automatically generated by configure - do not modify" >config-all-disas.mak
echo "# Automatically generated by configure - do not modify" > $config_host_mak
echo >> $config_host_mak
echo all: >> $config_host_mak
echo "prefix=$prefix" >> $config_host_mak
echo "bindir=$bindir" >> $config_host_mak
2011-05-15 13:08:59 +04:00
echo "libdir=$libdir" >> $config_host_mak
echo "libexecdir=$libexecdir" >> $config_host_mak
echo "includedir=$includedir" >> $config_host_mak
echo "mandir=$mandir" >> $config_host_mak
echo "sysconfdir=$sysconfdir" >> $config_host_mak
echo "qemu_confdir=$qemu_confdir" >> $config_host_mak
echo "qemu_datadir=$qemu_datadir" >> $config_host_mak
echo "qemu_docdir=$qemu_docdir" >> $config_host_mak
echo "qemu_moddir=$qemu_moddir" >> $config_host_mak
if test "$mingw32" = "no" ; then
echo "qemu_localstatedir=$local_statedir" >> $config_host_mak
fi
echo "qemu_helperdir=$libexecdir" >> $config_host_mak
echo "extra_cflags=$EXTRA_CFLAGS" >> $config_host_mak
echo "extra_ldflags=$EXTRA_LDFLAGS" >> $config_host_mak
echo "qemu_localedir=$qemu_localedir" >> $config_host_mak
echo "libs_softmmu=$libs_softmmu" >> $config_host_mak
echo "ARCH=$ARCH" >> $config_host_mak
if test "$debug_tcg" = "yes" ; then
echo "CONFIG_DEBUG_TCG=y" >> $config_host_mak
fi
if test "$strip_opt" = "yes" ; then
echo "STRIP=${strip}" >> $config_host_mak
fi
if test "$bigendian" = "yes" ; then
echo "HOST_WORDS_BIGENDIAN=y" >> $config_host_mak
fi
if test "$mingw32" = "yes" ; then
echo "CONFIG_WIN32=y" >> $config_host_mak
rc_version=$(cat $source_path/VERSION)
version_major=${rc_version%%.*}
rc_version=${rc_version#*.}
version_minor=${rc_version%%.*}
rc_version=${rc_version#*.}
version_subminor=${rc_version%%.*}
version_micro=0
echo "CONFIG_FILEVERSION=$version_major,$version_minor,$version_subminor,$version_micro" >> $config_host_mak
echo "CONFIG_PRODUCTVERSION=$version_major,$version_minor,$version_subminor,$version_micro" >> $config_host_mak
if test "$guest_agent_with_vss" = "yes" ; then
echo "CONFIG_QGA_VSS=y" >> $config_host_mak
echo "QGA_VSS_PROVIDER=$qga_vss_provider" >> $config_host_mak
echo "WIN_SDK=\"$win_sdk\"" >> $config_host_mak
fi
if test "$guest_agent_ntddscsi" = "yes" ; then
echo "CONFIG_QGA_NTDDDISK=y" >> $config_host_mak
fi
if test "$guest_agent_msi" = "yes"; then
echo "QEMU_GA_MSI_ENABLED=yes" >> $config_host_mak
echo "QEMU_GA_MSI_MINGW_DLL_PATH=${QEMU_GA_MSI_MINGW_DLL_PATH}" >> $config_host_mak
echo "QEMU_GA_MSI_WITH_VSS=${QEMU_GA_MSI_WITH_VSS}" >> $config_host_mak
echo "QEMU_GA_MSI_ARCH=${QEMU_GA_MSI_ARCH}" >> $config_host_mak
echo "QEMU_GA_MANUFACTURER=${QEMU_GA_MANUFACTURER}" >> $config_host_mak
echo "QEMU_GA_DISTRO=${QEMU_GA_DISTRO}" >> $config_host_mak
echo "QEMU_GA_VERSION=${QEMU_GA_VERSION}" >> $config_host_mak
fi
else
echo "CONFIG_POSIX=y" >> $config_host_mak
fi
if test "$linux" = "yes" ; then
echo "CONFIG_LINUX=y" >> $config_host_mak
fi
if test "$darwin" = "yes" ; then
echo "CONFIG_DARWIN=y" >> $config_host_mak
fi
if test "$aix" = "yes" ; then
echo "CONFIG_AIX=y" >> $config_host_mak
fi
if test "$solaris" = "yes" ; then
echo "CONFIG_SOLARIS=y" >> $config_host_mak
echo "CONFIG_SOLARIS_VERSION=$solarisrev" >> $config_host_mak
if test "$needs_libsunmath" = "yes" ; then
echo "CONFIG_NEEDS_LIBSUNMATH=y" >> $config_host_mak
fi
fi
if test "$haiku" = "yes" ; then
echo "CONFIG_HAIKU=y" >> $config_host_mak
fi
if test "$static" = "yes" ; then
echo "CONFIG_STATIC=y" >> $config_host_mak
fi
if test "$profiler" = "yes" ; then
echo "CONFIG_PROFILER=y" >> $config_host_mak
fi
if test "$slirp" = "yes" ; then
echo "CONFIG_SLIRP=y" >> $config_host_mak
echo "CONFIG_SMBD_COMMAND=\"$smbd\"" >> $config_host_mak
fi
if test "$vde" = "yes" ; then
echo "CONFIG_VDE=y" >> $config_host_mak
fi
if test "$netmap" = "yes" ; then
echo "CONFIG_NETMAP=y" >> $config_host_mak
fi
if test "$l2tpv3" = "yes" ; then
echo "CONFIG_L2TPV3=y" >> $config_host_mak
fi
if test "$cap_ng" = "yes" ; then
echo "CONFIG_LIBCAP=y" >> $config_host_mak
fi
echo "CONFIG_AUDIO_DRIVERS=$audio_drv_list" >> $config_host_mak
for drv in $audio_drv_list; do
def=CONFIG_$(echo $drv | LC_ALL=C tr '[a-z]' '[A-Z]')
echo "$def=y" >> $config_host_mak
done
if test "$audio_pt_int" = "yes" ; then
echo "CONFIG_AUDIO_PT_INT=y" >> $config_host_mak
fi
if test "$audio_win_int" = "yes" ; then
echo "CONFIG_AUDIO_WIN_INT=y" >> $config_host_mak
fi
echo "CONFIG_BDRV_RW_WHITELIST=$block_drv_rw_whitelist" >> $config_host_mak
echo "CONFIG_BDRV_RO_WHITELIST=$block_drv_ro_whitelist" >> $config_host_mak
if test "$vnc" = "yes" ; then
echo "CONFIG_VNC=y" >> $config_host_mak
fi
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 23:27:28 +03:00
if test "$vnc_sasl" = "yes" ; then
echo "CONFIG_VNC_SASL=y" >> $config_host_mak
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 23:27:28 +03:00
fi
if test "$vnc_jpeg" = "yes" ; then
echo "CONFIG_VNC_JPEG=y" >> $config_host_mak
fi
if test "$vnc_png" = "yes" ; then
echo "CONFIG_VNC_PNG=y" >> $config_host_mak
fi
Support ACLs for controlling VNC access ("Daniel P. Berrange") This patch introduces a generic internal API for access control lists to be used by network servers in QEMU. It adds support for checking these ACL in the VNC server, in two places. The first ACL is for the SASL authentication mechanism, checking the SASL username. This ACL is called 'vnc.username'. The second is for the TLS authentication mechanism, when x509 client certificates are turned on, checking against the Distinguished Name of the client. This ACL is called 'vnc.x509dname' The internal API provides for an ACL with the following characteristics - A unique name, eg vnc.username, and vnc.x509dname. - A default policy, allow or deny - An ordered series of match rules, with allow or deny policy If none of the match rules apply, then the default policy is used. There is a monitor API to manipulate the ACLs, which I'll describe via examples (qemu) acl show vnc.username policy: allow (qemu) acl policy vnc.username denya acl: policy set to 'deny' (qemu) acl allow vnc.username fred acl: added rule at position 1 (qemu) acl allow vnc.username bob acl: added rule at position 2 (qemu) acl allow vnc.username joe 1 acl: added rule at position 1 (qemu) acl show vnc.username policy: deny 0: allow fred 1: allow joe 2: allow bob (qemu) acl show vnc.x509dname policy: allow (qemu) acl policy vnc.x509dname deny acl: policy set to 'deny' (qemu) acl allow vnc.x509dname C=GB,O=ACME,L=London,CN=* acl: added rule at position 1 (qemu) acl allow vnc.x509dname C=GB,O=ACME,L=Boston,CN=bob acl: added rule at position 2 (qemu) acl show vnc.x509dname policy: deny 0: allow C=GB,O=ACME,L=London,CN=* 1: allow C=GB,O=ACME,L=Boston,CN=bob By default the VNC server will not use any ACLs, allowing access to the server if the user successfully authenticates. To enable use of ACLs to restrict user access, the ',acl' flag should be given when starting QEMU. The initial ACL activated will be a 'deny all' policy and should be customized using monitor commands. eg enable SASL auth and ACLs qemu .... -vnc localhost:1,sasl,acl The next patch will provide a way to load a pre-defined ACL when starting up Makefile | 6 + b/acl.c | 185 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ b/acl.h | 74 ++++++++++++++++++++++ configure | 18 +++++ monitor.c | 95 ++++++++++++++++++++++++++++ qemu-doc.texi | 49 ++++++++++++++ vnc-auth-sasl.c | 16 +++- vnc-auth-sasl.h | 7 ++ vnc-tls.c | 19 +++++ vnc-tls.h | 3 vnc.c | 21 ++++++ vnc.h | 3 12 files changed, 491 insertions(+), 5 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6726 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 23:27:37 +03:00
if test "$fnmatch" = "yes" ; then
echo "CONFIG_FNMATCH=y" >> $config_host_mak
Support ACLs for controlling VNC access ("Daniel P. Berrange") This patch introduces a generic internal API for access control lists to be used by network servers in QEMU. It adds support for checking these ACL in the VNC server, in two places. The first ACL is for the SASL authentication mechanism, checking the SASL username. This ACL is called 'vnc.username'. The second is for the TLS authentication mechanism, when x509 client certificates are turned on, checking against the Distinguished Name of the client. This ACL is called 'vnc.x509dname' The internal API provides for an ACL with the following characteristics - A unique name, eg vnc.username, and vnc.x509dname. - A default policy, allow or deny - An ordered series of match rules, with allow or deny policy If none of the match rules apply, then the default policy is used. There is a monitor API to manipulate the ACLs, which I'll describe via examples (qemu) acl show vnc.username policy: allow (qemu) acl policy vnc.username denya acl: policy set to 'deny' (qemu) acl allow vnc.username fred acl: added rule at position 1 (qemu) acl allow vnc.username bob acl: added rule at position 2 (qemu) acl allow vnc.username joe 1 acl: added rule at position 1 (qemu) acl show vnc.username policy: deny 0: allow fred 1: allow joe 2: allow bob (qemu) acl show vnc.x509dname policy: allow (qemu) acl policy vnc.x509dname deny acl: policy set to 'deny' (qemu) acl allow vnc.x509dname C=GB,O=ACME,L=London,CN=* acl: added rule at position 1 (qemu) acl allow vnc.x509dname C=GB,O=ACME,L=Boston,CN=bob acl: added rule at position 2 (qemu) acl show vnc.x509dname policy: deny 0: allow C=GB,O=ACME,L=London,CN=* 1: allow C=GB,O=ACME,L=Boston,CN=bob By default the VNC server will not use any ACLs, allowing access to the server if the user successfully authenticates. To enable use of ACLs to restrict user access, the ',acl' flag should be given when starting QEMU. The initial ACL activated will be a 'deny all' policy and should be customized using monitor commands. eg enable SASL auth and ACLs qemu .... -vnc localhost:1,sasl,acl The next patch will provide a way to load a pre-defined ACL when starting up Makefile | 6 + b/acl.c | 185 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ b/acl.h | 74 ++++++++++++++++++++++ configure | 18 +++++ monitor.c | 95 ++++++++++++++++++++++++++++ qemu-doc.texi | 49 ++++++++++++++ vnc-auth-sasl.c | 16 +++- vnc-auth-sasl.h | 7 ++ vnc-tls.c | 19 +++++ vnc-tls.h | 3 vnc.c | 21 ++++++ vnc.h | 3 12 files changed, 491 insertions(+), 5 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6726 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 23:27:37 +03:00
fi
if test "$xfs" = "yes" ; then
echo "CONFIG_XFS=y" >> $config_host_mak
fi
qemu_version=$(head $source_path/VERSION)
echo "VERSION=$qemu_version" >>$config_host_mak
echo "PKGVERSION=$pkgversion" >>$config_host_mak
echo "SRC_PATH=$source_path" >> $config_host_mak
echo "TARGET_DIRS=$target_list" >> $config_host_mak
if [ "$docs" = "yes" ] ; then
echo "BUILD_DOCS=yes" >> $config_host_mak
fi
if test "$modules" = "yes"; then
# $shacmd can generate a hash started with digit, which the compiler doesn't
# like as an symbol. So prefix it with an underscore
echo "CONFIG_STAMP=_$( (echo $qemu_version; echo $pkgversion; cat $0) | $shacmd - | cut -f1 -d\ )" >> $config_host_mak
echo "CONFIG_MODULES=y" >> $config_host_mak
fi
if test "$sdl" = "yes" ; then
echo "CONFIG_SDL=y" >> $config_host_mak
echo "CONFIG_SDLABI=$sdlabi" >> $config_host_mak
echo "SDL_CFLAGS=$sdl_cflags" >> $config_host_mak
fi
if test "$cocoa" = "yes" ; then
echo "CONFIG_COCOA=y" >> $config_host_mak
fi
if test "$curses" = "yes" ; then
echo "CONFIG_CURSES=y" >> $config_host_mak
fi
if test "$utimens" = "yes" ; then
echo "CONFIG_UTIMENSAT=y" >> $config_host_mak
fi
if test "$pipe2" = "yes" ; then
echo "CONFIG_PIPE2=y" >> $config_host_mak
fi
if test "$accept4" = "yes" ; then
echo "CONFIG_ACCEPT4=y" >> $config_host_mak
fi
if test "$splice" = "yes" ; then
echo "CONFIG_SPLICE=y" >> $config_host_mak
fi
if test "$eventfd" = "yes" ; then
echo "CONFIG_EVENTFD=y" >> $config_host_mak
fi
if test "$memfd" = "yes" ; then
echo "CONFIG_MEMFD=y" >> $config_host_mak
fi
if test "$fallocate" = "yes" ; then
echo "CONFIG_FALLOCATE=y" >> $config_host_mak
fi
if test "$fallocate_punch_hole" = "yes" ; then
echo "CONFIG_FALLOCATE_PUNCH_HOLE=y" >> $config_host_mak
fi
if test "$fallocate_zero_range" = "yes" ; then
echo "CONFIG_FALLOCATE_ZERO_RANGE=y" >> $config_host_mak
fi
if test "$posix_fallocate" = "yes" ; then
echo "CONFIG_POSIX_FALLOCATE=y" >> $config_host_mak
fi
if test "$sync_file_range" = "yes" ; then
echo "CONFIG_SYNC_FILE_RANGE=y" >> $config_host_mak
fi
if test "$fiemap" = "yes" ; then
echo "CONFIG_FIEMAP=y" >> $config_host_mak
fi
if test "$dup3" = "yes" ; then
echo "CONFIG_DUP3=y" >> $config_host_mak
fi
if test "$ppoll" = "yes" ; then
echo "CONFIG_PPOLL=y" >> $config_host_mak
fi
if test "$prctl_pr_set_timerslack" = "yes" ; then
echo "CONFIG_PRCTL_PR_SET_TIMERSLACK=y" >> $config_host_mak
fi
if test "$epoll" = "yes" ; then
echo "CONFIG_EPOLL=y" >> $config_host_mak
fi
if test "$epoll_create1" = "yes" ; then
echo "CONFIG_EPOLL_CREATE1=y" >> $config_host_mak
fi
if test "$sendfile" = "yes" ; then
echo "CONFIG_SENDFILE=y" >> $config_host_mak
fi
if test "$timerfd" = "yes" ; then
echo "CONFIG_TIMERFD=y" >> $config_host_mak
fi
if test "$setns" = "yes" ; then
echo "CONFIG_SETNS=y" >> $config_host_mak
fi
if test "$inotify" = "yes" ; then
echo "CONFIG_INOTIFY=y" >> $config_host_mak
fi
if test "$inotify1" = "yes" ; then
echo "CONFIG_INOTIFY1=y" >> $config_host_mak
fi
if test "$byteswap_h" = "yes" ; then
echo "CONFIG_BYTESWAP_H=y" >> $config_host_mak
fi
if test "$bswap_h" = "yes" ; then
echo "CONFIG_MACHINE_BSWAP_H=y" >> $config_host_mak
fi
if test "$curl" = "yes" ; then
echo "CONFIG_CURL=m" >> $config_host_mak
echo "CURL_CFLAGS=$curl_cflags" >> $config_host_mak
echo "CURL_LIBS=$curl_libs" >> $config_host_mak
fi
if test "$brlapi" = "yes" ; then
echo "CONFIG_BRLAPI=y" >> $config_host_mak
fi
if test "$bluez" = "yes" ; then
echo "CONFIG_BLUEZ=y" >> $config_host_mak
echo "BLUEZ_CFLAGS=$bluez_cflags" >> $config_host_mak
fi
if test "$glib_subprocess" = "yes" ; then
echo "CONFIG_HAS_GLIB_SUBPROCESS_TESTS=y" >> $config_host_mak
fi
if test "$gtk" = "yes" ; then
echo "CONFIG_GTK=y" >> $config_host_mak
echo "CONFIG_GTKABI=$gtkabi" >> $config_host_mak
echo "GTK_CFLAGS=$gtk_cflags" >> $config_host_mak
echo "GTK_LIBS=$gtk_libs" >> $config_host_mak
if test "$gtk_gl" = "yes" ; then
echo "CONFIG_GTK_GL=y" >> $config_host_mak
fi
fi
echo "CONFIG_TLS_PRIORITY=\"$tls_priority\"" >> $config_host_mak
if test "$gnutls" = "yes" ; then
echo "CONFIG_GNUTLS=y" >> $config_host_mak
fi
if test "$gnutls_rnd" = "yes" ; then
echo "CONFIG_GNUTLS_RND=y" >> $config_host_mak
fi
if test "$gcrypt" = "yes" ; then
echo "CONFIG_GCRYPT=y" >> $config_host_mak
if test "$gcrypt_kdf" = "yes" ; then
echo "CONFIG_GCRYPT_KDF=y" >> $config_host_mak
fi
fi
if test "$nettle" = "yes" ; then
echo "CONFIG_NETTLE=y" >> $config_host_mak
echo "CONFIG_NETTLE_VERSION_MAJOR=${nettle_version%%.*}" >> $config_host_mak
if test "$nettle_kdf" = "yes" ; then
echo "CONFIG_NETTLE_KDF=y" >> $config_host_mak
fi
fi
if test "$tasn1" = "yes" ; then
echo "CONFIG_TASN1=y" >> $config_host_mak
fi
if test "$have_ifaddrs_h" = "yes" ; then
echo "HAVE_IFADDRS_H=y" >> $config_host_mak
fi
# Work around a system header bug with some kernel/XFS header
# versions where they both try to define 'struct fsxattr':
# xfs headers will not try to redefine structs from linux headers
# if this macro is set.
if test "$have_fsxattr" = "yes" ; then
echo "HAVE_FSXATTR=y" >> $config_host_mak
fi
if test "$vte" = "yes" ; then
echo "CONFIG_VTE=y" >> $config_host_mak
echo "VTE_CFLAGS=$vte_cflags" >> $config_host_mak
fi
if test "$virglrenderer" = "yes" ; then
echo "CONFIG_VIRGL=y" >> $config_host_mak
echo "VIRGL_CFLAGS=$virgl_cflags" >> $config_host_mak
echo "VIRGL_LIBS=$virgl_libs" >> $config_host_mak
fi
if test "$xen" = "yes" ; then
echo "CONFIG_XEN_BACKEND=y" >> $config_host_mak
echo "CONFIG_XEN_CTRL_INTERFACE_VERSION=$xen_ctrl_version" >> $config_host_mak
if test "$xen_pv_domain_build" = "yes" ; then
echo "CONFIG_XEN_PV_DOMAIN_BUILD=y" >> $config_host_mak
fi
fi
if test "$linux_aio" = "yes" ; then
echo "CONFIG_LINUX_AIO=y" >> $config_host_mak
fi
if test "$attr" = "yes" ; then
echo "CONFIG_ATTR=y" >> $config_host_mak
fi
if test "$libattr" = "yes" ; then
echo "CONFIG_LIBATTR=y" >> $config_host_mak
fi
if test "$virtfs" = "yes" ; then
echo "CONFIG_VIRTFS=y" >> $config_host_mak
fi
vhost-scsi: new device supporting the tcm_vhost Linux kernel module The WWPN specified in configfs is passed to "-device vhost-scsi-pci". The tgpt field of the SET_ENDPOINT ioctl is obsolete now, so it is not available from the QEMU command-line. Instead, I hardcode it to zero. Changes in Patch-v2: - Add vhost_scsi_get_features() in order to determine feature bits supports by host kernel (mst + nab) - Re-enable usage of DEFINE_VIRTIO_COMMON_FEATURES, and allow EVENT_IDX to be disabled by host in vhost_scsi_get_features() - Drop unused hotplug bit in DEFINE_VHOST_SCSI_PROPERTIES Changes in Patch-v1: - Set event_idx=off by default (nab, thanks asias) - Disable hotplug feature bit for v3.9 tcm_vhost kernel code, need to re-enable in v3.10 (nab) - Update to latest qemu.git/master HEAD Changes in WIP-V3: - Drop ioeventfd vhost_scsi_properties (asias, thanks stefanha) - Add CONFIG_VHOST_SCSI (asias, thanks stefanha) - Add hotplug feature bit Changes in WIP-V2: - Add backend guest masking support (nab) - Bump ABI_VERSION to 1 (nab) - Set up set_guest_notifiers (asias) - Set up vs->dev.vq_index (asias) - Drop vs->vs.vdev.{set,clear}_vhost_endpoint (asias) - Drop VIRTIO_CONFIG_S_DRIVER check in vhost_scsi_set_status (asias) Howto: Use the latest seabios, at least commit b44a7be17b git clone git://git.seabios.org/seabios.git make cp out/bios.bin /usr/share/qemu/bios.bin qemu -device vhost-scsi-pci,wwpn=naa.6001405bd4e8476d,event_idx=off ... Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Asias He <asias@redhat.com> [ Rebase on top of VirtIOSCSICommon patch, fix bugs in feature negotiation and irqfd masking - Paolo ] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-29 05:08:16 +04:00
if test "$vhost_scsi" = "yes" ; then
echo "CONFIG_VHOST_SCSI=y" >> $config_host_mak
fi
if test "$vhost_net" = "yes" ; then
echo "CONFIG_VHOST_NET_USED=y" >> $config_host_mak
fi
if test "$vhost_vsock" = "yes" ; then
echo "CONFIG_VHOST_VSOCK=y" >> $config_host_mak
fi
if test "$blobs" = "yes" ; then
echo "INSTALL_BLOBS=yes" >> $config_host_mak
fi
if test "$iovec" = "yes" ; then
echo "CONFIG_IOVEC=y" >> $config_host_mak
fi
if test "$preadv" = "yes" ; then
echo "CONFIG_PREADV=y" >> $config_host_mak
fi
if test "$fdt" = "yes" ; then
echo "CONFIG_FDT=y" >> $config_host_mak
fi
if test "$signalfd" = "yes" ; then
echo "CONFIG_SIGNALFD=y" >> $config_host_mak
fi
if test "$tcg_interpreter" = "yes" ; then
echo "CONFIG_TCG_INTERPRETER=y" >> $config_host_mak
fi
if test "$fdatasync" = "yes" ; then
echo "CONFIG_FDATASYNC=y" >> $config_host_mak
fi
Introduce qemu_madvise() vl.c has a Sun-specific hack to supply a prototype for madvise(), but the call site has apparently moved to arch_init.c. Haiku doesn't implement madvise() in favor of posix_madvise(). OpenBSD and Solaris 10 don't implement posix_madvise() but madvise(). MinGW implements neither. Check for madvise() and posix_madvise() in configure and supply qemu_madvise() as wrapper. Prefer madvise() over posix_madvise() due to flag availability. Convert all callers to use qemu_madvise() and QEMU_MADV_*. Note that on Solaris the warning is fixed by moving the madvise() prototype, not by qemu_madvise() itself. It helps with porting though, and it simplifies most call sites. v7 -> v8: * Some versions of MinGW have no sys/mman.h header. Reported by Blue Swirl. v6 -> v7: * Adopt madvise() rather than posix_madvise() semantics for returning errors. * Use EINVAL in place of ENOTSUP. v5 -> v6: * Replace two leftover instances of POSIX_MADV_NORMAL with QEMU_MADV_INVALID. Spotted by Blue Swirl. v4 -> v5: * Introduce QEMU_MADV_INVALID, suggested by Alexander Graf. Note that this relies on -1 not being a valid advice value. v3 -> v4: * Eliminate #ifdefs at qemu_advise() call sites. Requested by Blue Swirl. This will currently break the check in kvm-all.c by calling madvise() with a supported flag, which will not fail. Ideas/patches welcome. v2 -> v3: * Reuse the *_MADV_* defines for QEMU_MADV_*. Suggested by Alexander Graf. * Add configure check for madvise(), too. Add defines to Makefile, not QEMU_CFLAGS. Convert all callers, untested. Suggested by Blue Swirl. * Keep Solaris' madvise() prototype around. Pointed out by Alexander Graf. * Display configure check results. v1 -> v2: * Don't rely on posix_madvise() availability, add qemu_madvise(). Suggested by Blue Swirl. Signed-off-by: Andreas Färber <afaerber@opensolaris.org> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Alexander Graf <agraf@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-09-25 15:26:05 +04:00
if test "$madvise" = "yes" ; then
echo "CONFIG_MADVISE=y" >> $config_host_mak
fi
if test "$posix_madvise" = "yes" ; then
echo "CONFIG_POSIX_MADVISE=y" >> $config_host_mak
fi
2010-03-24 12:26:51 +03:00
if test "$spice" = "yes" ; then
echo "CONFIG_SPICE=y" >> $config_host_mak
fi
usb-ccid: add CCID bus A CCID device is a smart card reader. It is a USB device, defined at [1]. This patch introduces the usb-ccid device that is a ccid bus. Next patches will introduce two card types to use it, a passthru card and an emulated card. [1] http://www.usb.org/developers/devclass_docs/DWG_Smart-Card_CCID_Rev110. Signed-off-by: Alon Levy <alevy@redhat.com> --- changes from v20->v21: (Jes Sorenson review) * cosmetic changes - fix multi line comments. * reorder fields in USBCCIDState * add reference to COPYING * add --enable-smartcard and --disable-smartcard here (moved from last patch) changes from v19->v20: * checkpatch.pl changes from v18->v19: * merged: ccid.h: add copyright, fix define and remove non C89 comments * add qdev.desc changes from v15->v16: Behavioral changes: * fix abort on client answer after card remove * enable migration * remove side affect code from asserts * return consistent self-powered state * mask out reserved bits in ccid_set_parameters * add missing abRFU in SetParameters (no affect on linux guest) whitefixes / comments / consts defines: * remove stale comment * remove ccid_print_pending_answers if no DEBUG_CCID * replace printf's with DPRINTF, remove DEBUG_CCID, add verbosity defines * use error_report * update copyright (most of the code is not original) * reword known bug comment * add missing closing quote in comment * add missing whitespace on one line * s/CCID_SetParameter/CCID_SetParameters/ * add comments * use define for max packet size Comment for "return consistent self-powered state": the Configuration Descriptor bmAttributes claims we are self powered, but we were returning not self powered to USB_REQ_GET_STATUS control message. In practice, this message is not sent by a linux 2.6.35.10-74.fc14.x86_64 guest (not tested on other guests), unless you issue lsusb -v as root (for example).
2010-10-17 13:40:07 +04:00
if test "$smartcard" = "yes" ; then
echo "CONFIG_SMARTCARD=y" >> $config_host_mak
libcacard: initial commit libcacard emulates a Common Access Card (CAC) which is a standard for smartcards. It is used by the emulated ccid card introduced in a following patch. Docs are available in docs/libcacard.txt Signed-off-by: Alon Levy <alevy@redhat.com> --- changes from v24->v25: * Fix out of tree builds. * Fix build with linux-user targets. changes from v23->v24: (Jes Sorensen review 2) * Makefile.target: use obj-$(CONFIG_*) += * remove unrequired includes, include qemu-common before qemu-thread * required adding #define NO_NSPR_10_SUPPORT (harmless) changes from v22->v23: * configure fixes: (reported by Stefan Hajnoczi) * test a = b, not a == b (second isn't portable) * quote $source_path in case it contains spaces - this doesn't really help since there are many other places that need similar fixes, not introduced by this patch. changes from v21->v22: * fix configure to not link libcacard if nss not found (reported by Stefan Hajnoczi) * fix vscclient linkage with simpletrace backend (reported by Stefan Hajnoczi) * card_7816.c: add missing break in ERROR_DATA_NOT_FOUND (reported by William van de Velde) changes from v20->v21: (Jes Sorensen review) * use qemu infrastructure: qemu-thread, qemu-common (qemu_malloc and qemu_free), error_report * assert instead of ASSERT * cosmetic fixes * use strpbrk and isspace * add --disable-nss --enable-nss here, instead of in the final patch. * split vscclient, passthru and docs to following patches. changes from v19->v20: * checkpatch.pl changes from v15->v16: Build: * don't erase self with distclean * fix make clean after make distclean * Makefile: make vscclient link quiet Behavioral: * vcard_emul_nss: load coolkey in more situations * vscclient: * use hton,ntoh * send init on connect, only start vevent thread on response * read payload after header check, before type switch * remove Reconnect * update for vscard_common changes, empty Flush implementation Style/Whitespace: * fix wrong variable usage * remove unused variable * use only C style comments * add copyright header * fix tabulation Signed-off-by: Alon Levy <alevy@redhat.com> libcacard: fix out of tree builds
2010-11-28 17:36:38 +03:00
fi
if test "$libusb" = "yes" ; then
echo "CONFIG_USB_LIBUSB=y" >> $config_host_mak
fi
if test "$usb_redir" = "yes" ; then
echo "CONFIG_USB_REDIR=y" >> $config_host_mak
fi
if test "$opengl" = "yes" ; then
echo "CONFIG_OPENGL=y" >> $config_host_mak
echo "OPENGL_CFLAGS=$opengl_cflags" >> $config_host_mak
echo "OPENGL_LIBS=$opengl_libs" >> $config_host_mak
if test "$opengl_dmabuf" = "yes" ; then
echo "CONFIG_OPENGL_DMABUF=y" >> $config_host_mak
fi
fi
if test "$avx2_opt" = "yes" ; then
echo "CONFIG_AVX2_OPT=y" >> $config_host_mak
fi
if test "$lzo" = "yes" ; then
echo "CONFIG_LZO=y" >> $config_host_mak
fi
if test "$snappy" = "yes" ; then
echo "CONFIG_SNAPPY=y" >> $config_host_mak
fi
if test "$bzip2" = "yes" ; then
echo "CONFIG_BZIP2=y" >> $config_host_mak
echo "BZIP2_LIBS=-lbz2" >> $config_host_mak
fi
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 12:24:24 +04:00
if test "$libiscsi" = "yes" ; then
echo "CONFIG_LIBISCSI=m" >> $config_host_mak
echo "LIBISCSI_CFLAGS=$libiscsi_cflags" >> $config_host_mak
echo "LIBISCSI_LIBS=$libiscsi_libs" >> $config_host_mak
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 12:24:24 +04:00
fi
if test "$libnfs" = "yes" ; then
echo "CONFIG_LIBNFS=m" >> $config_host_mak
echo "LIBNFS_LIBS=$libnfs_libs" >> $config_host_mak
fi
if test "$seccomp" = "yes"; then
echo "CONFIG_SECCOMP=y" >> $config_host_mak
fi
# XXX: suppress that
if [ "$bsd" = "yes" ] ; then
echo "CONFIG_BSD=y" >> $config_host_mak
fi
oslib-win32: only provide localtime_r/gmtime_r if missing The oslib-win32 file currently provides a localtime_r and gmtime_r replacement unconditionally. Some versions of Mingw-w64 would provide crude macros for localtime_r/gmtime_r which QEMU takes care to disable. Latest versions of Mingw-w64 now provide actual functions for localtime_r/gmtime_r, but with a twist that you have to include unistd.h or pthread.h before including time.h. By luck some files in QEMU have such an include order, resulting in compile errors: CC util/osdep.o In file included from include/qemu-common.h:48:0, from util/osdep.c:48: include/sysemu/os-win32.h:77:12: error: redundant redeclaration of 'gmtime_r' [-Werror=redundant-decls] struct tm *gmtime_r(const time_t *timep, struct tm *result); ^ In file included from include/qemu-common.h:35:0, from util/osdep.c:48: /usr/i686-w64-mingw32/sys-root/mingw/include/time.h:272:107: note: previous definition of 'gmtime_r' was here In file included from include/qemu-common.h:48:0, from util/osdep.c:48: include/sysemu/os-win32.h:79:12: error: redundant redeclaration of 'localtime_r' [-Werror=redundant-decls] struct tm *localtime_r(const time_t *timep, struct tm *result); ^ In file included from include/qemu-common.h:35:0, from util/osdep.c:48: /usr/i686-w64-mingw32/sys-root/mingw/include/time.h:269:107: note: previous definition of 'localtime_r' was here This change adds a configure test to see if localtime_r exits, and only enables the QEMU impl if missing. We also re-arrange qemu-common.h try attempt to guarantee that all source files get unistd.h before time.h and thus see the localtime_r/gmtime_r defs. [sw: Use "official" spellings for Mingw-w64, MinGW in comments.] [sw: Terminate sentences with a dot in comments.] Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Denis V. Lunev <den@openvz.org> Signed-off-by: Stefan Weil <sw@weilnetz.de>
2015-09-22 17:13:26 +03:00
if test "$localtime_r" = "yes" ; then
echo "CONFIG_LOCALTIME_R=y" >> $config_host_mak
fi
if test "$qom_cast_debug" = "yes" ; then
echo "CONFIG_QOM_CAST_DEBUG=y" >> $config_host_mak
fi
if test "$rbd" = "yes" ; then
echo "CONFIG_RBD=m" >> $config_host_mak
echo "RBD_CFLAGS=$rbd_cflags" >> $config_host_mak
echo "RBD_LIBS=$rbd_libs" >> $config_host_mak
fi
echo "CONFIG_COROUTINE_BACKEND=$coroutine" >> $config_host_mak
if test "$coroutine_pool" = "yes" ; then
echo "CONFIG_COROUTINE_POOL=1" >> $config_host_mak
else
echo "CONFIG_COROUTINE_POOL=0" >> $config_host_mak
fi
if test "$open_by_handle_at" = "yes" ; then
echo "CONFIG_OPEN_BY_HANDLE=y" >> $config_host_mak
fi
if test "$linux_magic_h" = "yes" ; then
echo "CONFIG_LINUX_MAGIC_H=y" >> $config_host_mak
fi
if test "$pragma_diagnostic_available" = "yes" ; then
echo "CONFIG_PRAGMA_DIAGNOSTIC_AVAILABLE=y" >> $config_host_mak
fi
if test "$valgrind_h" = "yes" ; then
echo "CONFIG_VALGRIND_H=y" >> $config_host_mak
fi
if test "$has_environ" = "yes" ; then
echo "CONFIG_HAS_ENVIRON=y" >> $config_host_mak
fi
if test "$cpuid_h" = "yes" ; then
echo "CONFIG_CPUID_H=y" >> $config_host_mak
fi
if test "$int128" = "yes" ; then
echo "CONFIG_INT128=y" >> $config_host_mak
fi
if test "$getauxval" = "yes" ; then
echo "CONFIG_GETAUXVAL=y" >> $config_host_mak
fi
if test "$glusterfs" = "yes" ; then
echo "CONFIG_GLUSTERFS=m" >> $config_host_mak
echo "GLUSTERFS_CFLAGS=$glusterfs_cflags" >> $config_host_mak
echo "GLUSTERFS_LIBS=$glusterfs_libs" >> $config_host_mak
fi
if test "$glusterfs_xlator_opt" = "yes" ; then
echo "CONFIG_GLUSTERFS_XLATOR_OPT=y" >> $config_host_mak
fi
if test "$glusterfs_discard" = "yes" ; then
echo "CONFIG_GLUSTERFS_DISCARD=y" >> $config_host_mak
fi
if test "$glusterfs_zerofill" = "yes" ; then
echo "CONFIG_GLUSTERFS_ZEROFILL=y" >> $config_host_mak
fi
if test "$archipelago" = "yes" ; then
echo "CONFIG_ARCHIPELAGO=m" >> $config_host_mak
echo "ARCHIPELAGO_LIBS=$archipelago_libs" >> $config_host_mak
fi
if test "$libssh2" = "yes" ; then
echo "CONFIG_LIBSSH2=m" >> $config_host_mak
echo "LIBSSH2_CFLAGS=$libssh2_cflags" >> $config_host_mak
echo "LIBSSH2_LIBS=$libssh2_libs" >> $config_host_mak
fi
# USB host support
if test "$libusb" = "yes"; then
echo "HOST_USB=libusb legacy" >> $config_host_mak
else
echo "HOST_USB=stub" >> $config_host_mak
fi
# TPM passthrough support?
if test "$tpm" = "yes"; then
echo 'CONFIG_TPM=$(CONFIG_SOFTMMU)' >> $config_host_mak
if test "$tpm_passthrough" = "yes"; then
echo "CONFIG_TPM_PASSTHROUGH=y" >> $config_host_mak
fi
fi
echo "TRACE_BACKENDS=$trace_backends" >> $config_host_mak
if have_backend "nop"; then
echo "CONFIG_TRACE_NOP=y" >> $config_host_mak
fi
if have_backend "simple"; then
echo "CONFIG_TRACE_SIMPLE=y" >> $config_host_mak
# Set the appropriate trace file.
trace_file="\"$trace_file-\" FMT_pid"
fi
if have_backend "log"; then
echo "CONFIG_TRACE_LOG=y" >> $config_host_mak
fi
if have_backend "ust"; then
echo "CONFIG_TRACE_UST=y" >> $config_host_mak
fi
if have_backend "dtrace"; then
echo "CONFIG_TRACE_DTRACE=y" >> $config_host_mak
if test "$trace_backend_stap" = "yes" ; then
echo "CONFIG_TRACE_SYSTEMTAP=y" >> $config_host_mak
fi
fi
if have_backend "ftrace"; then
if test "$linux" = "yes" ; then
echo "CONFIG_TRACE_FTRACE=y" >> $config_host_mak
else
feature_not_found "ftrace(trace backend)" "ftrace requires Linux"
fi
fi
if have_backend "syslog"; then
if test "$posix_syslog" = "yes" ; then
echo "CONFIG_TRACE_SYSLOG=y" >> $config_host_mak
else
feature_not_found "syslog(trace backend)" "syslog not available"
fi
fi
echo "CONFIG_TRACE_FILE=$trace_file" >> $config_host_mak
if test "$rdma" = "yes" ; then
echo "CONFIG_RDMA=y" >> $config_host_mak
fi
if test "$have_rtnetlink" = "yes" ; then
echo "CONFIG_RTNETLINK=y" >> $config_host_mak
fi
if test "$replication" = "yes" ; then
echo "CONFIG_REPLICATION=y" >> $config_host_mak
fi
# Hold two types of flag:
# CONFIG_THREAD_SETNAME_BYTHREAD - we've got a way of setting the name on
# a thread we have a handle to
# CONFIG_PTHREAD_SETNAME_NP - A way of doing it on a particular
# platform
if test "$pthread_setname_np" = "yes" ; then
echo "CONFIG_THREAD_SETNAME_BYTHREAD=y" >> $config_host_mak
echo "CONFIG_PTHREAD_SETNAME_NP=y" >> $config_host_mak
fi
if test "$tcg_interpreter" = "yes"; then
QEMU_INCLUDES="-I\$(SRC_PATH)/tcg/tci $QEMU_INCLUDES"
elif test "$ARCH" = "sparc64" ; then
QEMU_INCLUDES="-I\$(SRC_PATH)/tcg/sparc $QEMU_INCLUDES"
elif test "$ARCH" = "s390x" ; then
QEMU_INCLUDES="-I\$(SRC_PATH)/tcg/s390 $QEMU_INCLUDES"
elif test "$ARCH" = "x86_64" -o "$ARCH" = "x32" ; then
QEMU_INCLUDES="-I\$(SRC_PATH)/tcg/i386 $QEMU_INCLUDES"
elif test "$ARCH" = "ppc64" ; then
QEMU_INCLUDES="-I\$(SRC_PATH)/tcg/ppc $QEMU_INCLUDES"
else
QEMU_INCLUDES="-I\$(SRC_PATH)/tcg/\$(ARCH) $QEMU_INCLUDES"
fi
QEMU_INCLUDES="-I\$(SRC_PATH)/tcg $QEMU_INCLUDES"
echo "TOOLS=$tools" >> $config_host_mak
echo "ROMS=$roms" >> $config_host_mak
echo "MAKE=$make" >> $config_host_mak
echo "INSTALL=$install" >> $config_host_mak
echo "INSTALL_DIR=$install -d -m 0755" >> $config_host_mak
echo "INSTALL_DATA=$install -c -m 0644" >> $config_host_mak
echo "INSTALL_PROG=$install -c -m 0755" >> $config_host_mak
echo "INSTALL_LIB=$install -c -m 0644" >> $config_host_mak
echo "PYTHON=$python" >> $config_host_mak
echo "CC=$cc" >> $config_host_mak
if $iasl -h > /dev/null 2>&1; then
echo "IASL=$iasl" >> $config_host_mak
fi
echo "CC_I386=$cc_i386" >> $config_host_mak
echo "HOST_CC=$host_cc" >> $config_host_mak
echo "CXX=$cxx" >> $config_host_mak
echo "OBJCC=$objcc" >> $config_host_mak
echo "AR=$ar" >> $config_host_mak
echo "ARFLAGS=$ARFLAGS" >> $config_host_mak
echo "AS=$as" >> $config_host_mak
echo "CCAS=$ccas" >> $config_host_mak
echo "CPP=$cpp" >> $config_host_mak
echo "OBJCOPY=$objcopy" >> $config_host_mak
echo "LD=$ld" >> $config_host_mak
echo "NM=$nm" >> $config_host_mak
echo "WINDRES=$windres" >> $config_host_mak
echo "CFLAGS=$CFLAGS" >> $config_host_mak
echo "CFLAGS_NOPIE=$CFLAGS_NOPIE" >> $config_host_mak
echo "QEMU_CFLAGS=$QEMU_CFLAGS" >> $config_host_mak
echo "QEMU_INCLUDES=$QEMU_INCLUDES" >> $config_host_mak
if test "$sparse" = "yes" ; then
echo "CC := REAL_CC=\"\$(CC)\" cgcc" >> $config_host_mak
echo "CPP := REAL_CC=\"\$(CPP)\" cgcc" >> $config_host_mak
echo "CXX := REAL_CC=\"\$(CXX)\" cgcc" >> $config_host_mak
echo "HOST_CC := REAL_CC=\"\$(HOST_CC)\" cgcc" >> $config_host_mak
echo "QEMU_CFLAGS += -Wbitwise -Wno-transparent-union -Wno-old-initializer -Wno-non-pointer-null" >> $config_host_mak
fi
if test "$cross_prefix" != ""; then
echo "AUTOCONF_HOST := --host=${cross_prefix%-}" >> $config_host_mak
else
echo "AUTOCONF_HOST := " >> $config_host_mak
fi
echo "LDFLAGS=$LDFLAGS" >> $config_host_mak
echo "LDFLAGS_NOPIE=$LDFLAGS_NOPIE" >> $config_host_mak
echo "LD_REL_FLAGS=$LD_REL_FLAGS" >> $config_host_mak
echo "LD_I386_EMULATION=$ld_i386_emulation" >> $config_host_mak
echo "LIBS+=$LIBS" >> $config_host_mak
echo "LIBS_TOOLS+=$libs_tools" >> $config_host_mak
tests: introduce a framework for testing migration performance This introduces a moderately general purpose framework for testing performance of migration. The initial guest workload is provided by the included 'stress' program, which is configured to spawn one thread per guest CPU and run a maximally memory intensive workload. It will loop over GB of memory, xor'ing each byte with data from a 4k array of random bytes. This ensures heavy read and write load across all of guest memory to stress the migration performance. While running the 'stress' program will record how long it takes to xor each GB of memory and print this data for later reporting. The test engine will spawn a pair of QEMU processes, either on the same host, or with the target on a remote host via ssh, using the host kernel and a custom initrd built with 'stress' as the /init binary. Kernel command line args are set to ensure a fast kernel boot time (< 1 second) between launching QEMU and the stress program starting execution. None the less, the test engine will initially wait N seconds for the guest workload to stablize, before starting the migration operation. When migration is running, the engine will use pause, post-copy, autoconverge, xbzrle compression and multithread compression features, as well as downtime & bandwidth tuning to encourage completion. If migration completes, the test engine will wait N seconds again for the guest workooad to stablize on the target host. If migration does not complete after a preset number of iterations, it will be aborted. While the QEMU process is running on the source host, the test engine will sample the host CPU usage of QEMU as a whole, and each vCPU thread. While migration is running, it will record all the stats reported by 'query-migration'. Finally, it will capture the output of the stress program running in the guest. All the data produced from a single test execution is recorded in a structured JSON file. A separate program is then able to create interactive charts using the "plotly" python + javascript libraries, showing the characteristics of the migration. The data output provides visualization of the effect on guest vCPU workloads from the migration process, the corresponding vCPU utilization on the host, and the overall CPU hit from QEMU on the host. This is correlated from statistics from the migration process, such as downtime, vCPU throttling and iteration number. While the tests can be run individually with arbitrary parameters, there is also a facility for producing batch reports for a number of pre-defined scenarios / comparisons, in order to be able to get standardized results across different hardware configurations (eg TCP vs RDMA, or comparing different VCPU counts / memory sizes, etc). To use this, first you must build the initrd image $ make tests/migration/initrd-stress.img To run a a one-shot test with all default parameters $ ./tests/migration/guestperf.py > result.json This has many command line args for varying its behaviour. For example, to increase the RAM size and CPU count and bind it to specific host NUMA nodes $ ./tests/migration/guestperf.py \ --mem 4 --cpus 2 \ --src-mem-bind 0 --src-cpu-bind 0,1 \ --dst-mem-bind 1 --dst-cpu-bind 2,3 \ > result.json Using mem + cpu binding is strongly recommended on NUMA machines, otherwise the guest performance results will vary wildly between runs of the test due to lucky/unlucky NUMA placement, making sensible data analysis impossible. To make it run across separate hosts: $ ./tests/migration/guestperf.py \ --dst-host somehostname > result.json To request that post-copy is enabled, with switchover after 5 iterations $ ./tests/migration/guestperf.py \ --post-copy --post-copy-iters 5 > result.json Once a result.json file is created, a graph of the data can be generated, showing guest workload performance per thread and the migration iteration points: $ ./tests/migration/guestperf-plot.py --output result.html \ --migration-iters --split-guest-cpu result.json To further include host vCPU utilization and overall QEMU utilization $ ./tests/migration/guestperf-plot.py --output result.html \ --migration-iters --split-guest-cpu \ --qemu-cpu --vcpu-cpu result.json NB, the 'guestperf-plot.py' command requires that you have the plotly python library installed. eg you must do $ pip install --user plotly Viewing the result.html file requires that you have the plotly.min.js file in the same directory as the HTML output. This js file is installed as part of the plotly python library, so can be found in $HOME/.local/lib/python2.7/site-packages/plotly/offline/plotly.min.js The guestperf-plot.py program can accept multiple json files to plot, enabling results from different configurations to be compared. Finally, to run the entire standardized set of comparisons $ ./tests/migration/guestperf-batch.py \ --dst-host somehost \ --mem 4 --cpus 2 \ --src-mem-bind 0 --src-cpu-bind 0,1 \ --dst-mem-bind 1 --dst-cpu-bind 2,3 --output tcp-somehost-4gb-2cpu will store JSON files from all scenarios in the directory named tcp-somehost-4gb-2cpu Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1469020993-29426-7-git-send-email-berrange@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-07-20 16:23:13 +03:00
echo "PTHREAD_LIB=$PTHREAD_LIB" >> $config_host_mak
echo "EXESUF=$EXESUF" >> $config_host_mak
echo "DSOSUF=$DSOSUF" >> $config_host_mak
echo "LDFLAGS_SHARED=$LDFLAGS_SHARED" >> $config_host_mak
echo "LIBS_QGA+=$libs_qga" >> $config_host_mak
echo "TASN1_LIBS=$tasn1_libs" >> $config_host_mak
echo "TASN1_CFLAGS=$tasn1_cflags" >> $config_host_mak
echo "POD2MAN=$POD2MAN" >> $config_host_mak
echo "TRANSLATE_OPT_CFLAGS=$TRANSLATE_OPT_CFLAGS" >> $config_host_mak
if test "$gcov" = "yes" ; then
echo "CONFIG_GCOV=y" >> $config_host_mak
echo "GCOV=$gcov_tool" >> $config_host_mak
fi
# use included Linux headers
if test "$linux" = "yes" ; then
mkdir -p linux-headers
case "$cpu" in
i386|x86_64|x32)
linux_arch=x86
;;
ppcemb|ppc|ppc64)
linux_arch=powerpc
;;
s390x)
linux_arch=s390
;;
aarch64)
linux_arch=arm64
;;
mips64)
linux_arch=mips
;;
*)
# For most CPUs the kernel architecture name and QEMU CPU name match.
linux_arch="$cpu"
;;
esac
# For non-KVM architectures we will not have asm headers
if [ -e "$source_path/linux-headers/asm-$linux_arch" ]; then
symlink "$source_path/linux-headers/asm-$linux_arch" linux-headers/asm
fi
fi
for target in $target_list; do
target_dir="$target"
config_target_mak=$target_dir/config-target.mak
target_name=$(echo $target | cut -d '-' -f 1)
target_bigendian="no"
case "$target_name" in
armeb|lm32|m68k|microblaze|mips|mipsn32|mips64|moxie|or32|ppc|ppcemb|ppc64|ppc64abi32|s390x|sh4eb|sparc|sparc64|sparc32plus|xtensaeb)
target_bigendian=yes
;;
esac
target_softmmu="no"
target_user_only="no"
target_linux_user="no"
target_bsd_user="no"
case "$target" in
${target_name}-softmmu)
target_softmmu="yes"
;;
${target_name}-linux-user)
if test "$linux" != "yes" ; then
error_exit "Target '$target' is only available on a Linux host"
fi
target_user_only="yes"
target_linux_user="yes"
;;
${target_name}-bsd-user)
if test "$bsd" != "yes" ; then
error_exit "Target '$target' is only available on a BSD host"
fi
target_user_only="yes"
target_bsd_user="yes"
;;
*)
error_exit "Target '$target' not recognised"
exit 1
;;
esac
mkdir -p $target_dir
echo "# Automatically generated by configure - do not modify" > $config_target_mak
bflt="no"
interp_prefix1=$(echo "$interp_prefix" | sed "s/%M/$target_name/g")
gdb_xml_files=""
TARGET_ARCH="$target_name"
TARGET_BASE_ARCH=""
TARGET_ABI_DIR=""
case "$target_name" in
i386)
;;
x86_64)
TARGET_BASE_ARCH=i386
;;
alpha)
;;
arm|armeb)
TARGET_ARCH=arm
bflt="yes"
gdb_xml_files="arm-core.xml arm-vfp.xml arm-vfp3.xml arm-neon.xml"
;;
aarch64)
TARGET_BASE_ARCH=arm
bflt="yes"
gdb_xml_files="aarch64-core.xml aarch64-fpu.xml arm-core.xml arm-vfp.xml arm-vfp3.xml arm-neon.xml"
;;
cris)
;;
lm32)
;;
m68k)
bflt="yes"
gdb_xml_files="cf-core.xml cf-fp.xml"
;;
microblaze|microblazeel)
TARGET_ARCH=microblaze
bflt="yes"
;;
mips|mipsel)
TARGET_ARCH=mips
echo "TARGET_ABI_MIPSO32=y" >> $config_target_mak
;;
mipsn32|mipsn32el)
TARGET_ARCH=mips64
TARGET_BASE_ARCH=mips
echo "TARGET_ABI_MIPSN32=y" >> $config_target_mak
echo "TARGET_ABI32=y" >> $config_target_mak
;;
mips64|mips64el)
TARGET_ARCH=mips64
TARGET_BASE_ARCH=mips
echo "TARGET_ABI_MIPSN64=y" >> $config_target_mak
;;
moxie)
;;
or32)
TARGET_ARCH=openrisc
TARGET_BASE_ARCH=openrisc
;;
ppc)
gdb_xml_files="power-core.xml power-fpu.xml power-altivec.xml power-spe.xml"
;;
ppcemb)
TARGET_BASE_ARCH=ppc
TARGET_ABI_DIR=ppc
gdb_xml_files="power-core.xml power-fpu.xml power-altivec.xml power-spe.xml"
;;
ppc64)
TARGET_BASE_ARCH=ppc
TARGET_ABI_DIR=ppc
gdb_xml_files="power64-core.xml power-fpu.xml power-altivec.xml power-spe.xml power-vsx.xml"
;;
ppc64le)
TARGET_ARCH=ppc64
TARGET_BASE_ARCH=ppc
TARGET_ABI_DIR=ppc
gdb_xml_files="power64-core.xml power-fpu.xml power-altivec.xml power-spe.xml power-vsx.xml"
;;
ppc64abi32)
TARGET_ARCH=ppc64
TARGET_BASE_ARCH=ppc
TARGET_ABI_DIR=ppc
echo "TARGET_ABI32=y" >> $config_target_mak
gdb_xml_files="power64-core.xml power-fpu.xml power-altivec.xml power-spe.xml power-vsx.xml"
;;
sh4|sh4eb)
TARGET_ARCH=sh4
bflt="yes"
;;
sparc)
;;
sparc64)
TARGET_BASE_ARCH=sparc
;;
sparc32plus)
TARGET_ARCH=sparc64
TARGET_BASE_ARCH=sparc
TARGET_ABI_DIR=sparc
echo "TARGET_ABI32=y" >> $config_target_mak
;;
s390x)
gdb_xml_files="s390x-core64.xml s390-acr.xml s390-fpr.xml s390-vx.xml s390-cr.xml s390-virt.xml"
;;
tilegx)
;;
tricore)
;;
unicore32)
;;
xtensa|xtensaeb)
TARGET_ARCH=xtensa
;;
*)
error_exit "Unsupported target CPU"
;;
esac
# TARGET_BASE_ARCH needs to be defined after TARGET_ARCH
if [ "$TARGET_BASE_ARCH" = "" ]; then
TARGET_BASE_ARCH=$TARGET_ARCH
fi
symlink "$source_path/Makefile.target" "$target_dir/Makefile"
upper() {
echo "$@"| LC_ALL=C tr '[a-z]' '[A-Z]'
}
target_arch_name="$(upper $TARGET_ARCH)"
echo "TARGET_$target_arch_name=y" >> $config_target_mak
echo "TARGET_NAME=$target_name" >> $config_target_mak
echo "TARGET_BASE_ARCH=$TARGET_BASE_ARCH" >> $config_target_mak
if [ "$TARGET_ABI_DIR" = "" ]; then
TARGET_ABI_DIR=$TARGET_ARCH
fi
echo "TARGET_ABI_DIR=$TARGET_ABI_DIR" >> $config_target_mak
if [ "$HOST_VARIANT_DIR" != "" ]; then
echo "HOST_VARIANT_DIR=$HOST_VARIANT_DIR" >> $config_target_mak
fi
case "$target_name" in
i386|x86_64)
if test "$xen" = "yes" -a "$target_softmmu" = "yes" ; then
echo "CONFIG_XEN=y" >> $config_target_mak
if test "$xen_pci_passthrough" = yes; then
echo "CONFIG_XEN_PCI_PASSTHROUGH=y" >> "$config_target_mak"
fi
fi
;;
*)
esac
case "$target_name" in
aarch64|arm|i386|x86_64|ppcemb|ppc|ppc64|s390x|mipsel|mips)
# Make sure the target and host cpus are compatible
if test "$kvm" = "yes" -a "$target_softmmu" = "yes" -a \
\( "$target_name" = "$cpu" -o \
\( "$target_name" = "ppcemb" -a "$cpu" = "ppc" \) -o \
\( "$target_name" = "ppc64" -a "$cpu" = "ppc" \) -o \
\( "$target_name" = "ppc" -a "$cpu" = "ppc64" \) -o \
\( "$target_name" = "ppcemb" -a "$cpu" = "ppc64" \) -o \
\( "$target_name" = "mipsel" -a "$cpu" = "mips" \) -o \
\( "$target_name" = "x86_64" -a "$cpu" = "i386" \) -o \
\( "$target_name" = "i386" -a "$cpu" = "x86_64" \) -o \
\( "$target_name" = "x86_64" -a "$cpu" = "x32" \) -o \
\( "$target_name" = "i386" -a "$cpu" = "x32" \) \) ; then
echo "CONFIG_KVM=y" >> $config_target_mak
if test "$vhost_net" = "yes" ; then
echo "CONFIG_VHOST_NET=y" >> $config_target_mak
echo "CONFIG_VHOST_NET_TEST_$target_name=y" >> $config_host_mak
fi
fi
esac
if test "$target_bigendian" = "yes" ; then
echo "TARGET_WORDS_BIGENDIAN=y" >> $config_target_mak
fi
if test "$target_softmmu" = "yes" ; then
echo "CONFIG_SOFTMMU=y" >> $config_target_mak
fi
if test "$target_user_only" = "yes" ; then
echo "CONFIG_USER_ONLY=y" >> $config_target_mak
echo "CONFIG_QEMU_INTERP_PREFIX=\"$interp_prefix1\"" >> $config_target_mak
fi
if test "$target_linux_user" = "yes" ; then
echo "CONFIG_LINUX_USER=y" >> $config_target_mak
fi
list=""
if test ! -z "$gdb_xml_files" ; then
for x in $gdb_xml_files; do
list="$list $source_path/gdb-xml/$x"
done
echo "TARGET_XML_FILES=$list" >> $config_target_mak
fi
if test "$target_user_only" = "yes" -a "$bflt" = "yes"; then
echo "TARGET_HAS_BFLT=y" >> $config_target_mak
fi
if test "$target_bsd_user" = "yes" ; then
echo "CONFIG_BSD_USER=y" >> $config_target_mak
fi
# generate QEMU_CFLAGS/LDFLAGS for targets
cflags=""
ldflags=""
disas_config() {
echo "CONFIG_${1}_DIS=y" >> $config_target_mak
echo "CONFIG_${1}_DIS=y" >> config-all-disas.mak
}
for i in $ARCH $TARGET_BASE_ARCH ; do
case "$i" in
alpha)
disas_config "ALPHA"
;;
aarch64)
if test -n "${cxx}"; then
disas_config "ARM_A64"
fi
;;
arm)
disas_config "ARM"
if test -n "${cxx}"; then
disas_config "ARM_A64"
fi
;;
cris)
disas_config "CRIS"
;;
i386|x86_64|x32)
disas_config "I386"
;;
ia64*)
disas_config "IA64"
;;
lm32)
disas_config "LM32"
;;
m68k)
disas_config "M68K"
;;
microblaze*)
disas_config "MICROBLAZE"
;;
mips*)
disas_config "MIPS"
;;
moxie*)
disas_config "MOXIE"
;;
or32)
disas_config "OPENRISC"
;;
ppc*)
disas_config "PPC"
;;
s390*)
disas_config "S390"
;;
sh4)
disas_config "SH4"
;;
sparc*)
disas_config "SPARC"
;;
xtensa*)
disas_config "XTENSA"
;;
esac
done
if test "$tcg_interpreter" = "yes" ; then
disas_config "TCI"
fi
case "$ARCH" in
alpha)
# Ensure there's only a single GP
cflags="-msmall-data $cflags"
;;
esac
if test "$gprof" = "yes" ; then
echo "TARGET_GPROF=yes" >> $config_target_mak
if test "$target_linux_user" = "yes" ; then
cflags="-p $cflags"
ldflags="-p $ldflags"
fi
if test "$target_softmmu" = "yes" ; then
ldflags="-p $ldflags"
echo "GPROF_CFLAGS=-p" >> $config_target_mak
fi
fi
if test "$target_linux_user" = "yes" -o "$target_bsd_user" = "yes" ; then
ldflags="$ldflags $textseg_ldflags"
fi
echo "LDFLAGS+=$ldflags" >> $config_target_mak
echo "QEMU_CFLAGS+=$cflags" >> $config_target_mak
done # for target in $targets
if [ "$pixman" = "internal" ]; then
echo "config-host.h: subdir-pixman" >> $config_host_mak
fi
if [ "$dtc_internal" = "yes" ]; then
echo "config-host.h: subdir-dtc" >> $config_host_mak
fi
if test "$numa" = "yes"; then
echo "CONFIG_NUMA=y" >> $config_host_mak
fi
if test "$ccache_cpp2" = "yes"; then
echo "export CCACHE_CPP2=y" >> $config_host_mak
fi
# build tree in object directory in case the source is not in the current directory
DIRS="tests tests/tcg tests/tcg/cris tests/tcg/lm32 tests/libqos tests/qapi-schema tests/tcg/xtensa tests/qemu-iotests"
DIRS="$DIRS fsdev"
DIRS="$DIRS pc-bios/optionrom pc-bios/spapr-rtas pc-bios/s390-ccw"
DIRS="$DIRS roms/seabios roms/vgabios"
DIRS="$DIRS qapi-generated"
FILES="Makefile tests/tcg/Makefile qdict-test-data.txt"
FILES="$FILES tests/tcg/cris/Makefile tests/tcg/cris/.gdbinit"
FILES="$FILES tests/tcg/lm32/Makefile tests/tcg/xtensa/Makefile po/Makefile"
FILES="$FILES pc-bios/optionrom/Makefile pc-bios/keymaps"
FILES="$FILES pc-bios/spapr-rtas/Makefile"
FILES="$FILES pc-bios/s390-ccw/Makefile"
FILES="$FILES roms/seabios/Makefile roms/vgabios/Makefile"
FILES="$FILES pc-bios/qemu-icon.bmp"
for bios_file in \
$source_path/pc-bios/*.bin \
$source_path/pc-bios/*.aml \
$source_path/pc-bios/*.rom \
$source_path/pc-bios/*.dtb \
$source_path/pc-bios/*.img \
$source_path/pc-bios/openbios-* \
$source_path/pc-bios/u-boot.* \
$source_path/pc-bios/palcode-*
do
FILES="$FILES pc-bios/$(basename $bios_file)"
done
for test_file in $(find $source_path/tests/acpi-test-data -type f)
do
FILES="$FILES tests/acpi-test-data$(echo $test_file | sed -e 's/.*acpi-test-data//')"
done
mkdir -p $DIRS
for f in $FILES ; do
if [ -e "$source_path/$f" ] && [ "$pwd_is_source_path" != "y" ]; then
symlink "$source_path/$f" "$f"
fi
done
# temporary config to build submodules
for rom in seabios vgabios ; do
config_mak=roms/$rom/config.mak
echo "# Automatically generated by configure - do not modify" > $config_mak
echo "SRC_PATH=$source_path/roms/$rom" >> $config_mak
echo "AS=$as" >> $config_mak
echo "CCAS=$ccas" >> $config_mak
echo "CC=$cc" >> $config_mak
echo "BCC=bcc" >> $config_mak
echo "CPP=$cpp" >> $config_mak
echo "OBJCOPY=objcopy" >> $config_mak
echo "IASL=$iasl" >> $config_mak
echo "LD=$ld" >> $config_mak
done
# set up tests data directory
if [ ! -e tests/data ]; then
symlink "$source_path/tests/data" tests/data
fi
# set up qemu-iotests in this build directory
iotests_common_env="tests/qemu-iotests/common.env"
iotests_check="tests/qemu-iotests/check"
echo "# Automatically generated by configure - do not modify" > "$iotests_common_env"
echo >> "$iotests_common_env"
echo "export PYTHON='$python'" >> "$iotests_common_env"
if [ ! -e "$iotests_check" ]; then
symlink "$source_path/$iotests_check" "$iotests_check"
fi
# Save the configure command line for later reuse.
cat <<EOD >config.status
#!/bin/sh
# Generated by configure.
# Run this file to recreate the current configuration.
# Compiler output produced by configure, useful for debugging
# configure, is in config.log if it exists.
EOD
printf "exec" >>config.status
printf " '%s'" "$0" "$@" >>config.status
echo ' "$@"' >>config.status
chmod +x config.status
rm -r "$TMPDIR1"