qemu/sysconfigs/target/target-x86_64.conf

115 lines
3.7 KiB
Plaintext
Raw Normal View History

Add cpu model configuration support.. This is a reimplementation of prior versions which adds the ability to define cpu models for contemporary processors. The added models are likewise selected via -cpu <name>, and are intended to displace the existing convention of "-cpu qemu64" augmented with a series of feature flags. A primary motivation was determination of a least common denominator within a given processor class to simplify guest migration. It is still possible to modify an arbitrary model via additional feature flags however the goal here was to make doing so unnecessary in typical usage. The other consideration was providing models names reflective of current processors. Both AMD and Intel have reviewed the models in terms of balancing generality of migration vs. excessive feature downgrade relative to released silicon. This version of the patch replaces the prior hard wired definitions with a configuration file approach for new models. Existing models are thus far left as-is but may easily be transitioned to (or may be overridden by) the configuration file representation. Proposed new model definitions are provided here for current AMD and Intel processors. Each model consists of a name used to select it on the command line (-cpu <name>), and a model_id which corresponds to a least common denominator commercial instance of the processor class. A table of names/model_ids may be queried via "-cpu ?model": : x86 Opteron_G3 AMD Opteron 23xx (Gen 3 Class Opteron) x86 Opteron_G2 AMD Opteron 22xx (Gen 2 Class Opteron) x86 Opteron_G1 AMD Opteron 240 (Gen 1 Class Opteron) x86 Nehalem Intel Core i7 9xx (Nehalem Class Core i7) x86 Penryn Intel Core 2 Duo P9xxx (Penryn Class Core 2) x86 Conroe Intel Celeron_4x0 (Conroe/Merom Class Core 2) : Also added is "-cpu ?dump" which exhaustively outputs all config data for all defined models, and "-cpu ?cpuid" which enumerates all qemu recognized CPUID feature flags. The pseudo cpuid flag 'check' when added to the feature flag list will warn when feature flags (either implicit in a cpu model or explicit on the command line) would have otherwise been quietly unavailable to a guest: # qemu-system-x86_64 ... -cpu Nehalem,check warning: host cpuid 0000_0001 lacks requested flag 'sse4.2|sse4_2' [0x00100000] warning: host cpuid 0000_0001 lacks requested flag 'popcnt' [0x00800000] A similar 'enforce' pseudo flag exists which in addition to the above causes qemu to error exit if requested flags are unavailable. Configuration data for a cpu model resides in the target config file which by default will be installed as: /usr/local/etc/qemu/target-<arch>.conf The format of this file should be self explanatory given the definitions for the above six models and essentially mimics the structure of the static x86_def_t x86_defs. Encoding of cpuid flags names now allows aliases for both the configuration file and the command line which reconciles some Intel/AMD/Linux/Qemu naming differences. This patch was tested relative to qemu.git. Signed-off-by: john cooper <john.cooper@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-20 20:14:59 +03:00
# x86 CPU MODELS
[cpudef]
name = "Conroe"
level = "2"
vendor = "GenuineIntel"
family = "6"
model = "2"
stepping = "3"
feature_edx = "sse2 sse fxsr mmx clflush pse36 pat cmov mca pge mtrr sep apic cx8 mce pae msr tsc pse de fpu"
feature_ecx = "ssse3 sse3"
cpu defs: remove replicated flags from Intel (v2) This patch removes the replicated feature flags from cpuid 8000_0001:edx (extfeature_edx) from Intel models, as the duplicated feature flags are present only on AMD CPUs. On Intel models, only the i64, syscall, and xd flags are kept on extfeature_edx. This is based on a previous patch from John Cooper where this was introduced with many other changes at the same time. Original John's patch submission is at Message-ID: <4DDAD5E7.2020002@redhat.com>, <http://marc.info/?l=qemu-devel&m=130618871926030>. Original John's patch description was: cpu model bug fixes and definition corrections This patch was intended to address the replicated feature flags in cpuid 8000_0001:edx from cpuid 0000_0001:edx. This is due to AMD's definition where these flags are mostly cloned in the 8000_0001:edx cpuid function. qemu64 attempted to glue together the respective Intel and AMD nearly disjoint features and this propagated to the new Intel models as doing so was believed conservative at the time. However after further soak and test lugging around this cruft doesn't provide any value, could conceivably confuse a guest, and has confused users trying to maintain/add cpu definitions. This also caused issues for libvirt attempting to track this mis-encoding. So we've here tossed out the AMD replicated definitions from the Intel models, added a few replications into AMD definitions which were missing according to AMD's latest CPUID document, and reordered the config file flags to follow intuitive sequential bit ordering. Also two flag name aliases were added for clarity to Intel models. The end result being the models definitions now conform to their respective cpuid specifications sans x2apic which is emulated by kvm. This was tested with the following combinations: [Conroe, Penryn, Nehalem] x [F12-64, win64, win32] -- Intel host [Opteron_G1, Opteron_G2, Opteron_G3] x [F12-64, win64, win32] -- AMD host Yielding successful boots in all cases. Signed-off-by: john cooper <john.cooper@redhat.com> Changes v1 -> v2: - Rebase against latest Qemu git tree Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-17 20:41:23 +04:00
extfeature_edx = "i64 xd syscall"
Add cpu model configuration support.. This is a reimplementation of prior versions which adds the ability to define cpu models for contemporary processors. The added models are likewise selected via -cpu <name>, and are intended to displace the existing convention of "-cpu qemu64" augmented with a series of feature flags. A primary motivation was determination of a least common denominator within a given processor class to simplify guest migration. It is still possible to modify an arbitrary model via additional feature flags however the goal here was to make doing so unnecessary in typical usage. The other consideration was providing models names reflective of current processors. Both AMD and Intel have reviewed the models in terms of balancing generality of migration vs. excessive feature downgrade relative to released silicon. This version of the patch replaces the prior hard wired definitions with a configuration file approach for new models. Existing models are thus far left as-is but may easily be transitioned to (or may be overridden by) the configuration file representation. Proposed new model definitions are provided here for current AMD and Intel processors. Each model consists of a name used to select it on the command line (-cpu <name>), and a model_id which corresponds to a least common denominator commercial instance of the processor class. A table of names/model_ids may be queried via "-cpu ?model": : x86 Opteron_G3 AMD Opteron 23xx (Gen 3 Class Opteron) x86 Opteron_G2 AMD Opteron 22xx (Gen 2 Class Opteron) x86 Opteron_G1 AMD Opteron 240 (Gen 1 Class Opteron) x86 Nehalem Intel Core i7 9xx (Nehalem Class Core i7) x86 Penryn Intel Core 2 Duo P9xxx (Penryn Class Core 2) x86 Conroe Intel Celeron_4x0 (Conroe/Merom Class Core 2) : Also added is "-cpu ?dump" which exhaustively outputs all config data for all defined models, and "-cpu ?cpuid" which enumerates all qemu recognized CPUID feature flags. The pseudo cpuid flag 'check' when added to the feature flag list will warn when feature flags (either implicit in a cpu model or explicit on the command line) would have otherwise been quietly unavailable to a guest: # qemu-system-x86_64 ... -cpu Nehalem,check warning: host cpuid 0000_0001 lacks requested flag 'sse4.2|sse4_2' [0x00100000] warning: host cpuid 0000_0001 lacks requested flag 'popcnt' [0x00800000] A similar 'enforce' pseudo flag exists which in addition to the above causes qemu to error exit if requested flags are unavailable. Configuration data for a cpu model resides in the target config file which by default will be installed as: /usr/local/etc/qemu/target-<arch>.conf The format of this file should be self explanatory given the definitions for the above six models and essentially mimics the structure of the static x86_def_t x86_defs. Encoding of cpuid flags names now allows aliases for both the configuration file and the command line which reconciles some Intel/AMD/Linux/Qemu naming differences. This patch was tested relative to qemu.git. Signed-off-by: john cooper <john.cooper@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-20 20:14:59 +03:00
extfeature_ecx = "lahf_lm"
xlevel = "0x8000000A"
model_id = "Intel Celeron_4x0 (Conroe/Merom Class Core 2)"
[cpudef]
name = "Penryn"
level = "2"
vendor = "GenuineIntel"
family = "6"
model = "2"
stepping = "3"
feature_edx = "sse2 sse fxsr mmx clflush pse36 pat cmov mca pge mtrr sep apic cx8 mce pae msr tsc pse de fpu"
feature_ecx = "sse4.1 cx16 ssse3 sse3"
cpu defs: remove replicated flags from Intel (v2) This patch removes the replicated feature flags from cpuid 8000_0001:edx (extfeature_edx) from Intel models, as the duplicated feature flags are present only on AMD CPUs. On Intel models, only the i64, syscall, and xd flags are kept on extfeature_edx. This is based on a previous patch from John Cooper where this was introduced with many other changes at the same time. Original John's patch submission is at Message-ID: <4DDAD5E7.2020002@redhat.com>, <http://marc.info/?l=qemu-devel&m=130618871926030>. Original John's patch description was: cpu model bug fixes and definition corrections This patch was intended to address the replicated feature flags in cpuid 8000_0001:edx from cpuid 0000_0001:edx. This is due to AMD's definition where these flags are mostly cloned in the 8000_0001:edx cpuid function. qemu64 attempted to glue together the respective Intel and AMD nearly disjoint features and this propagated to the new Intel models as doing so was believed conservative at the time. However after further soak and test lugging around this cruft doesn't provide any value, could conceivably confuse a guest, and has confused users trying to maintain/add cpu definitions. This also caused issues for libvirt attempting to track this mis-encoding. So we've here tossed out the AMD replicated definitions from the Intel models, added a few replications into AMD definitions which were missing according to AMD's latest CPUID document, and reordered the config file flags to follow intuitive sequential bit ordering. Also two flag name aliases were added for clarity to Intel models. The end result being the models definitions now conform to their respective cpuid specifications sans x2apic which is emulated by kvm. This was tested with the following combinations: [Conroe, Penryn, Nehalem] x [F12-64, win64, win32] -- Intel host [Opteron_G1, Opteron_G2, Opteron_G3] x [F12-64, win64, win32] -- AMD host Yielding successful boots in all cases. Signed-off-by: john cooper <john.cooper@redhat.com> Changes v1 -> v2: - Rebase against latest Qemu git tree Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-17 20:41:23 +04:00
extfeature_edx = "i64 xd syscall"
Add cpu model configuration support.. This is a reimplementation of prior versions which adds the ability to define cpu models for contemporary processors. The added models are likewise selected via -cpu <name>, and are intended to displace the existing convention of "-cpu qemu64" augmented with a series of feature flags. A primary motivation was determination of a least common denominator within a given processor class to simplify guest migration. It is still possible to modify an arbitrary model via additional feature flags however the goal here was to make doing so unnecessary in typical usage. The other consideration was providing models names reflective of current processors. Both AMD and Intel have reviewed the models in terms of balancing generality of migration vs. excessive feature downgrade relative to released silicon. This version of the patch replaces the prior hard wired definitions with a configuration file approach for new models. Existing models are thus far left as-is but may easily be transitioned to (or may be overridden by) the configuration file representation. Proposed new model definitions are provided here for current AMD and Intel processors. Each model consists of a name used to select it on the command line (-cpu <name>), and a model_id which corresponds to a least common denominator commercial instance of the processor class. A table of names/model_ids may be queried via "-cpu ?model": : x86 Opteron_G3 AMD Opteron 23xx (Gen 3 Class Opteron) x86 Opteron_G2 AMD Opteron 22xx (Gen 2 Class Opteron) x86 Opteron_G1 AMD Opteron 240 (Gen 1 Class Opteron) x86 Nehalem Intel Core i7 9xx (Nehalem Class Core i7) x86 Penryn Intel Core 2 Duo P9xxx (Penryn Class Core 2) x86 Conroe Intel Celeron_4x0 (Conroe/Merom Class Core 2) : Also added is "-cpu ?dump" which exhaustively outputs all config data for all defined models, and "-cpu ?cpuid" which enumerates all qemu recognized CPUID feature flags. The pseudo cpuid flag 'check' when added to the feature flag list will warn when feature flags (either implicit in a cpu model or explicit on the command line) would have otherwise been quietly unavailable to a guest: # qemu-system-x86_64 ... -cpu Nehalem,check warning: host cpuid 0000_0001 lacks requested flag 'sse4.2|sse4_2' [0x00100000] warning: host cpuid 0000_0001 lacks requested flag 'popcnt' [0x00800000] A similar 'enforce' pseudo flag exists which in addition to the above causes qemu to error exit if requested flags are unavailable. Configuration data for a cpu model resides in the target config file which by default will be installed as: /usr/local/etc/qemu/target-<arch>.conf The format of this file should be self explanatory given the definitions for the above six models and essentially mimics the structure of the static x86_def_t x86_defs. Encoding of cpuid flags names now allows aliases for both the configuration file and the command line which reconciles some Intel/AMD/Linux/Qemu naming differences. This patch was tested relative to qemu.git. Signed-off-by: john cooper <john.cooper@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-20 20:14:59 +03:00
extfeature_ecx = "lahf_lm"
xlevel = "0x8000000A"
model_id = "Intel Core 2 Duo P9xxx (Penryn Class Core 2)"
[cpudef]
name = "Nehalem"
level = "2"
vendor = "GenuineIntel"
family = "6"
model = "2"
stepping = "3"
feature_edx = "sse2 sse fxsr mmx clflush pse36 pat cmov mca pge mtrr sep apic cx8 mce pae msr tsc pse de fpu"
feature_ecx = "popcnt sse4.2 sse4.1 cx16 ssse3 sse3"
cpu defs: remove replicated flags from Intel (v2) This patch removes the replicated feature flags from cpuid 8000_0001:edx (extfeature_edx) from Intel models, as the duplicated feature flags are present only on AMD CPUs. On Intel models, only the i64, syscall, and xd flags are kept on extfeature_edx. This is based on a previous patch from John Cooper where this was introduced with many other changes at the same time. Original John's patch submission is at Message-ID: <4DDAD5E7.2020002@redhat.com>, <http://marc.info/?l=qemu-devel&m=130618871926030>. Original John's patch description was: cpu model bug fixes and definition corrections This patch was intended to address the replicated feature flags in cpuid 8000_0001:edx from cpuid 0000_0001:edx. This is due to AMD's definition where these flags are mostly cloned in the 8000_0001:edx cpuid function. qemu64 attempted to glue together the respective Intel and AMD nearly disjoint features and this propagated to the new Intel models as doing so was believed conservative at the time. However after further soak and test lugging around this cruft doesn't provide any value, could conceivably confuse a guest, and has confused users trying to maintain/add cpu definitions. This also caused issues for libvirt attempting to track this mis-encoding. So we've here tossed out the AMD replicated definitions from the Intel models, added a few replications into AMD definitions which were missing according to AMD's latest CPUID document, and reordered the config file flags to follow intuitive sequential bit ordering. Also two flag name aliases were added for clarity to Intel models. The end result being the models definitions now conform to their respective cpuid specifications sans x2apic which is emulated by kvm. This was tested with the following combinations: [Conroe, Penryn, Nehalem] x [F12-64, win64, win32] -- Intel host [Opteron_G1, Opteron_G2, Opteron_G3] x [F12-64, win64, win32] -- AMD host Yielding successful boots in all cases. Signed-off-by: john cooper <john.cooper@redhat.com> Changes v1 -> v2: - Rebase against latest Qemu git tree Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-17 20:41:23 +04:00
extfeature_edx = "i64 syscall xd"
Add cpu model configuration support.. This is a reimplementation of prior versions which adds the ability to define cpu models for contemporary processors. The added models are likewise selected via -cpu <name>, and are intended to displace the existing convention of "-cpu qemu64" augmented with a series of feature flags. A primary motivation was determination of a least common denominator within a given processor class to simplify guest migration. It is still possible to modify an arbitrary model via additional feature flags however the goal here was to make doing so unnecessary in typical usage. The other consideration was providing models names reflective of current processors. Both AMD and Intel have reviewed the models in terms of balancing generality of migration vs. excessive feature downgrade relative to released silicon. This version of the patch replaces the prior hard wired definitions with a configuration file approach for new models. Existing models are thus far left as-is but may easily be transitioned to (or may be overridden by) the configuration file representation. Proposed new model definitions are provided here for current AMD and Intel processors. Each model consists of a name used to select it on the command line (-cpu <name>), and a model_id which corresponds to a least common denominator commercial instance of the processor class. A table of names/model_ids may be queried via "-cpu ?model": : x86 Opteron_G3 AMD Opteron 23xx (Gen 3 Class Opteron) x86 Opteron_G2 AMD Opteron 22xx (Gen 2 Class Opteron) x86 Opteron_G1 AMD Opteron 240 (Gen 1 Class Opteron) x86 Nehalem Intel Core i7 9xx (Nehalem Class Core i7) x86 Penryn Intel Core 2 Duo P9xxx (Penryn Class Core 2) x86 Conroe Intel Celeron_4x0 (Conroe/Merom Class Core 2) : Also added is "-cpu ?dump" which exhaustively outputs all config data for all defined models, and "-cpu ?cpuid" which enumerates all qemu recognized CPUID feature flags. The pseudo cpuid flag 'check' when added to the feature flag list will warn when feature flags (either implicit in a cpu model or explicit on the command line) would have otherwise been quietly unavailable to a guest: # qemu-system-x86_64 ... -cpu Nehalem,check warning: host cpuid 0000_0001 lacks requested flag 'sse4.2|sse4_2' [0x00100000] warning: host cpuid 0000_0001 lacks requested flag 'popcnt' [0x00800000] A similar 'enforce' pseudo flag exists which in addition to the above causes qemu to error exit if requested flags are unavailable. Configuration data for a cpu model resides in the target config file which by default will be installed as: /usr/local/etc/qemu/target-<arch>.conf The format of this file should be self explanatory given the definitions for the above six models and essentially mimics the structure of the static x86_def_t x86_defs. Encoding of cpuid flags names now allows aliases for both the configuration file and the command line which reconciles some Intel/AMD/Linux/Qemu naming differences. This patch was tested relative to qemu.git. Signed-off-by: john cooper <john.cooper@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-20 20:14:59 +03:00
extfeature_ecx = "lahf_lm"
xlevel = "0x8000000A"
model_id = "Intel Core i7 9xx (Nehalem Class Core i7)"
2012-02-17 20:41:24 +04:00
[cpudef]
name = "Westmere"
level = "11"
vendor = "GenuineIntel"
family = "6"
model = "44"
stepping = "1"
feature_edx = "sse2 sse fxsr mmx clflush pse36 pat cmov mca pge mtrr sep apic cx8 mce pae msr tsc pse de fpu"
feature_ecx = "aes popcnt sse4.2 sse4.1 cx16 ssse3 sse3"
extfeature_edx = "i64 syscall xd"
extfeature_ecx = "lahf_lm"
xlevel = "0x8000000A"
model_id = "Westmere E56xx/L56xx/X56xx (Nehalem-C)"
add SandyBridge CPU model This patches add the definition of a SandyBridge CPU model. Summary of differences: Flags present on actual hardware, but not on the added model definition: - pbe, tm, ht, ss, acpi, vme, xTPR, tm2, eist, smx: host-specific features, not exposed to guest. - ds, ds-cpl, dtes64, pdcm: emulation not supported by KVM (although it may be added in the future if implementing PMU virtualization) - pcid, vmx, monitor: not emulated by Qemu/KVM right now. - osxsave: set by the guest OS, not by Qemu. Flags added, that were not present on Westmere model: - xsave: already supported by Qemu - avx, pclmulqdq: all new state the new instructions could use is handled by xsave state loading/saving code. - tsc-deadline, x2apic, rdtscp: already supported by Qemu/KVM. Below there's a comparison of the features on the current Westmere CPU model, and the SandyBridge CPU model. - The "full" line contains the flags found on actual hardware. - The "missing" line shows the flags that are present on actual hardware, but not on the added SandyBridge model. - The "new" line shows the flags that were not on the Westmere model, but are on SandyBridge. feature_edx: Westmere: sse2 sse fxsr mmx clflush pse36 pat cmov mca pge mtrr sep apic cx8 mce pae msr tsc pse de fpu full: pbe tm ht ss sse2 sse fxsr mmx ds acpi clflush pse36 pat cmov mca pge mtrr sep apic cx8 mce pge msr tsc pse de vme fpu SandyBridge: sse2 sse fxsr mmx clflush pse36 pat cmov mca pge mtrr sep apic cx8 mce pae msr tsc pse de fpu missing: pbe tm ht ss ds acpi vme feature_ecx: Westmere: aes popcnt sse4.2 sse4.1 cx16 ssse3 sse3 full: avx osxsave xsave aes tsc-deadline popcnt x2apic sse4.2 sse4.1 pcid pdcm xTPR cx16 ssse3 tm2 eist smx vmx ds-cpl monitor dtes64 pclmulqdq sse3 SandyBridge: avx xsave aes tsc-deadline popcnt x2apic sse4.2 sse4.1 cx16 ssse3 pclmulqdq sse3 missing: osxsave pcid pdcm xTPR tm2 eist smx vmx ds-cpl monitor dtes64 new: avx xsave tsc-deadline x2apic pclmulqdq extfeature_edx: Westmere: i64 nx syscall full: i64 rdtscp nx syscall SandyBridge: i64 rdtscp nx syscall new: rdtscp extfeature_ecx: Westmere: lahf_lm full: lahf_lm SandyBridge: lahf_lm Cc: "Dugger, Donald D" <donald.d.dugger@intel.com> Cc: "Zhang, Xiantao" <xiantao.zhang@intel.com> Acked-by: Xiantao Zhang <xiantao.zhang@intel.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-06 22:11:31 +04:00
[cpudef]
name = "SandyBridge"
level = "0xd"
vendor = "GenuineIntel"
family = "6"
model = "42"
stepping = "1"
feature_edx = " sse2 sse fxsr mmx clflush pse36 pat cmov mca pge mtrr sep apic cx8 mce pae msr tsc pse de fpu"
feature_ecx = "avx xsave aes tsc-deadline popcnt x2apic sse4.2 sse4.1 cx16 ssse3 pclmulqdq sse3"
extfeature_edx = "i64 rdtscp nx syscall "
extfeature_ecx = "lahf_lm"
xlevel = "0x8000000A"
model_id = "Intel Xeon E312xx (Sandy Bridge)"
Add cpu model configuration support.. This is a reimplementation of prior versions which adds the ability to define cpu models for contemporary processors. The added models are likewise selected via -cpu <name>, and are intended to displace the existing convention of "-cpu qemu64" augmented with a series of feature flags. A primary motivation was determination of a least common denominator within a given processor class to simplify guest migration. It is still possible to modify an arbitrary model via additional feature flags however the goal here was to make doing so unnecessary in typical usage. The other consideration was providing models names reflective of current processors. Both AMD and Intel have reviewed the models in terms of balancing generality of migration vs. excessive feature downgrade relative to released silicon. This version of the patch replaces the prior hard wired definitions with a configuration file approach for new models. Existing models are thus far left as-is but may easily be transitioned to (or may be overridden by) the configuration file representation. Proposed new model definitions are provided here for current AMD and Intel processors. Each model consists of a name used to select it on the command line (-cpu <name>), and a model_id which corresponds to a least common denominator commercial instance of the processor class. A table of names/model_ids may be queried via "-cpu ?model": : x86 Opteron_G3 AMD Opteron 23xx (Gen 3 Class Opteron) x86 Opteron_G2 AMD Opteron 22xx (Gen 2 Class Opteron) x86 Opteron_G1 AMD Opteron 240 (Gen 1 Class Opteron) x86 Nehalem Intel Core i7 9xx (Nehalem Class Core i7) x86 Penryn Intel Core 2 Duo P9xxx (Penryn Class Core 2) x86 Conroe Intel Celeron_4x0 (Conroe/Merom Class Core 2) : Also added is "-cpu ?dump" which exhaustively outputs all config data for all defined models, and "-cpu ?cpuid" which enumerates all qemu recognized CPUID feature flags. The pseudo cpuid flag 'check' when added to the feature flag list will warn when feature flags (either implicit in a cpu model or explicit on the command line) would have otherwise been quietly unavailable to a guest: # qemu-system-x86_64 ... -cpu Nehalem,check warning: host cpuid 0000_0001 lacks requested flag 'sse4.2|sse4_2' [0x00100000] warning: host cpuid 0000_0001 lacks requested flag 'popcnt' [0x00800000] A similar 'enforce' pseudo flag exists which in addition to the above causes qemu to error exit if requested flags are unavailable. Configuration data for a cpu model resides in the target config file which by default will be installed as: /usr/local/etc/qemu/target-<arch>.conf The format of this file should be self explanatory given the definitions for the above six models and essentially mimics the structure of the static x86_def_t x86_defs. Encoding of cpuid flags names now allows aliases for both the configuration file and the command line which reconciles some Intel/AMD/Linux/Qemu naming differences. This patch was tested relative to qemu.git. Signed-off-by: john cooper <john.cooper@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-20 20:14:59 +03:00
[cpudef]
name = "Opteron_G1"
level = "5"
vendor = "AuthenticAMD"
family = "15"
model = "6"
stepping = "1"
feature_edx = "sse2 sse fxsr mmx clflush pse36 pat cmov mca pge mtrr sep apic cx8 mce pae msr tsc pse de fpu"
Add cpu model configuration support.. This is a reimplementation of prior versions which adds the ability to define cpu models for contemporary processors. The added models are likewise selected via -cpu <name>, and are intended to displace the existing convention of "-cpu qemu64" augmented with a series of feature flags. A primary motivation was determination of a least common denominator within a given processor class to simplify guest migration. It is still possible to modify an arbitrary model via additional feature flags however the goal here was to make doing so unnecessary in typical usage. The other consideration was providing models names reflective of current processors. Both AMD and Intel have reviewed the models in terms of balancing generality of migration vs. excessive feature downgrade relative to released silicon. This version of the patch replaces the prior hard wired definitions with a configuration file approach for new models. Existing models are thus far left as-is but may easily be transitioned to (or may be overridden by) the configuration file representation. Proposed new model definitions are provided here for current AMD and Intel processors. Each model consists of a name used to select it on the command line (-cpu <name>), and a model_id which corresponds to a least common denominator commercial instance of the processor class. A table of names/model_ids may be queried via "-cpu ?model": : x86 Opteron_G3 AMD Opteron 23xx (Gen 3 Class Opteron) x86 Opteron_G2 AMD Opteron 22xx (Gen 2 Class Opteron) x86 Opteron_G1 AMD Opteron 240 (Gen 1 Class Opteron) x86 Nehalem Intel Core i7 9xx (Nehalem Class Core i7) x86 Penryn Intel Core 2 Duo P9xxx (Penryn Class Core 2) x86 Conroe Intel Celeron_4x0 (Conroe/Merom Class Core 2) : Also added is "-cpu ?dump" which exhaustively outputs all config data for all defined models, and "-cpu ?cpuid" which enumerates all qemu recognized CPUID feature flags. The pseudo cpuid flag 'check' when added to the feature flag list will warn when feature flags (either implicit in a cpu model or explicit on the command line) would have otherwise been quietly unavailable to a guest: # qemu-system-x86_64 ... -cpu Nehalem,check warning: host cpuid 0000_0001 lacks requested flag 'sse4.2|sse4_2' [0x00100000] warning: host cpuid 0000_0001 lacks requested flag 'popcnt' [0x00800000] A similar 'enforce' pseudo flag exists which in addition to the above causes qemu to error exit if requested flags are unavailable. Configuration data for a cpu model resides in the target config file which by default will be installed as: /usr/local/etc/qemu/target-<arch>.conf The format of this file should be self explanatory given the definitions for the above six models and essentially mimics the structure of the static x86_def_t x86_defs. Encoding of cpuid flags names now allows aliases for both the configuration file and the command line which reconciles some Intel/AMD/Linux/Qemu naming differences. This patch was tested relative to qemu.git. Signed-off-by: john cooper <john.cooper@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-20 20:14:59 +03:00
feature_ecx = "sse3"
cpu defs: add pse36, mca, mtrr to AMD CPU definitions (v2) This patch adds some missing flags to extfeature_edx, that were missing according to AMD's latest CPUID document. This is based on a previous patch from John Cooper where this was introduced with many other changes at the same time. Original John's patch submission is at Message-ID: <4DDAD5E7.2020002@redhat.com>, <http://marc.info/?l=qemu-devel&m=130618871926030>. Original John's patch description was: cpu model bug fixes and definition corrections This patch was intended to address the replicated feature flags in cpuid 8000_0001:edx from cpuid 0000_0001:edx. This is due to AMD's definition where these flags are mostly cloned in the 8000_0001:edx cpuid function. qemu64 attempted to glue together the respective Intel and AMD nearly disjoint features and this propagated to the new Intel models as doing so was believed conservative at the time. However after further soak and test lugging around this cruft doesn't provide any value, could conceivably confuse a guest, and has confused users trying to maintain/add cpu definitions. This also caused issues for libvirt attempting to track this mis-encoding. So we've here tossed out the AMD replicated definitions from the Intel models, added a few replications into AMD definitions which were missing according to AMD's latest CPUID document, and reordered the config file flags to follow intuitive sequential bit ordering. Also two flag name aliases were added for clarity to Intel models. The end result being the models definitions now conform to their respective cpuid specifications sans x2apic which is emulated by kvm. This was tested with the following combinations: [Conroe, Penryn, Nehalem] x [F12-64, win64, win32] -- Intel host [Opteron_G1, Opteron_G2, Opteron_G3] x [F12-64, win64, win32] -- AMD host Yielding successful boots in all cases. Signed-off-by: john cooper <john.cooper@redhat.com> Changes v1 -> v2: - Rebase against latest Qemu git tree Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-17 20:41:22 +04:00
extfeature_edx = "lm fxsr mmx nx pse36 pat cmov mca pge mtrr syscall apic cx8 mce pae msr tsc pse de fpu"
extfeature_ecx = " "
Add cpu model configuration support.. This is a reimplementation of prior versions which adds the ability to define cpu models for contemporary processors. The added models are likewise selected via -cpu <name>, and are intended to displace the existing convention of "-cpu qemu64" augmented with a series of feature flags. A primary motivation was determination of a least common denominator within a given processor class to simplify guest migration. It is still possible to modify an arbitrary model via additional feature flags however the goal here was to make doing so unnecessary in typical usage. The other consideration was providing models names reflective of current processors. Both AMD and Intel have reviewed the models in terms of balancing generality of migration vs. excessive feature downgrade relative to released silicon. This version of the patch replaces the prior hard wired definitions with a configuration file approach for new models. Existing models are thus far left as-is but may easily be transitioned to (or may be overridden by) the configuration file representation. Proposed new model definitions are provided here for current AMD and Intel processors. Each model consists of a name used to select it on the command line (-cpu <name>), and a model_id which corresponds to a least common denominator commercial instance of the processor class. A table of names/model_ids may be queried via "-cpu ?model": : x86 Opteron_G3 AMD Opteron 23xx (Gen 3 Class Opteron) x86 Opteron_G2 AMD Opteron 22xx (Gen 2 Class Opteron) x86 Opteron_G1 AMD Opteron 240 (Gen 1 Class Opteron) x86 Nehalem Intel Core i7 9xx (Nehalem Class Core i7) x86 Penryn Intel Core 2 Duo P9xxx (Penryn Class Core 2) x86 Conroe Intel Celeron_4x0 (Conroe/Merom Class Core 2) : Also added is "-cpu ?dump" which exhaustively outputs all config data for all defined models, and "-cpu ?cpuid" which enumerates all qemu recognized CPUID feature flags. The pseudo cpuid flag 'check' when added to the feature flag list will warn when feature flags (either implicit in a cpu model or explicit on the command line) would have otherwise been quietly unavailable to a guest: # qemu-system-x86_64 ... -cpu Nehalem,check warning: host cpuid 0000_0001 lacks requested flag 'sse4.2|sse4_2' [0x00100000] warning: host cpuid 0000_0001 lacks requested flag 'popcnt' [0x00800000] A similar 'enforce' pseudo flag exists which in addition to the above causes qemu to error exit if requested flags are unavailable. Configuration data for a cpu model resides in the target config file which by default will be installed as: /usr/local/etc/qemu/target-<arch>.conf The format of this file should be self explanatory given the definitions for the above six models and essentially mimics the structure of the static x86_def_t x86_defs. Encoding of cpuid flags names now allows aliases for both the configuration file and the command line which reconciles some Intel/AMD/Linux/Qemu naming differences. This patch was tested relative to qemu.git. Signed-off-by: john cooper <john.cooper@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-20 20:14:59 +03:00
xlevel = "0x80000008"
model_id = "AMD Opteron 240 (Gen 1 Class Opteron)"
[cpudef]
name = "Opteron_G2"
level = "5"
vendor = "AuthenticAMD"
family = "15"
model = "6"
stepping = "1"
feature_edx = "sse2 sse fxsr mmx clflush pse36 pat cmov mca pge mtrr sep apic cx8 mce pae msr tsc pse de fpu"
feature_ecx = "cx16 sse3"
cpu defs: add pse36, mca, mtrr to AMD CPU definitions (v2) This patch adds some missing flags to extfeature_edx, that were missing according to AMD's latest CPUID document. This is based on a previous patch from John Cooper where this was introduced with many other changes at the same time. Original John's patch submission is at Message-ID: <4DDAD5E7.2020002@redhat.com>, <http://marc.info/?l=qemu-devel&m=130618871926030>. Original John's patch description was: cpu model bug fixes and definition corrections This patch was intended to address the replicated feature flags in cpuid 8000_0001:edx from cpuid 0000_0001:edx. This is due to AMD's definition where these flags are mostly cloned in the 8000_0001:edx cpuid function. qemu64 attempted to glue together the respective Intel and AMD nearly disjoint features and this propagated to the new Intel models as doing so was believed conservative at the time. However after further soak and test lugging around this cruft doesn't provide any value, could conceivably confuse a guest, and has confused users trying to maintain/add cpu definitions. This also caused issues for libvirt attempting to track this mis-encoding. So we've here tossed out the AMD replicated definitions from the Intel models, added a few replications into AMD definitions which were missing according to AMD's latest CPUID document, and reordered the config file flags to follow intuitive sequential bit ordering. Also two flag name aliases were added for clarity to Intel models. The end result being the models definitions now conform to their respective cpuid specifications sans x2apic which is emulated by kvm. This was tested with the following combinations: [Conroe, Penryn, Nehalem] x [F12-64, win64, win32] -- Intel host [Opteron_G1, Opteron_G2, Opteron_G3] x [F12-64, win64, win32] -- AMD host Yielding successful boots in all cases. Signed-off-by: john cooper <john.cooper@redhat.com> Changes v1 -> v2: - Rebase against latest Qemu git tree Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-17 20:41:22 +04:00
extfeature_edx = "lm rdtscp fxsr mmx nx pse36 pat cmov mca pge mtrr syscall apic cx8 mce pae msr tsc pse de fpu"
Add cpu model configuration support.. This is a reimplementation of prior versions which adds the ability to define cpu models for contemporary processors. The added models are likewise selected via -cpu <name>, and are intended to displace the existing convention of "-cpu qemu64" augmented with a series of feature flags. A primary motivation was determination of a least common denominator within a given processor class to simplify guest migration. It is still possible to modify an arbitrary model via additional feature flags however the goal here was to make doing so unnecessary in typical usage. The other consideration was providing models names reflective of current processors. Both AMD and Intel have reviewed the models in terms of balancing generality of migration vs. excessive feature downgrade relative to released silicon. This version of the patch replaces the prior hard wired definitions with a configuration file approach for new models. Existing models are thus far left as-is but may easily be transitioned to (or may be overridden by) the configuration file representation. Proposed new model definitions are provided here for current AMD and Intel processors. Each model consists of a name used to select it on the command line (-cpu <name>), and a model_id which corresponds to a least common denominator commercial instance of the processor class. A table of names/model_ids may be queried via "-cpu ?model": : x86 Opteron_G3 AMD Opteron 23xx (Gen 3 Class Opteron) x86 Opteron_G2 AMD Opteron 22xx (Gen 2 Class Opteron) x86 Opteron_G1 AMD Opteron 240 (Gen 1 Class Opteron) x86 Nehalem Intel Core i7 9xx (Nehalem Class Core i7) x86 Penryn Intel Core 2 Duo P9xxx (Penryn Class Core 2) x86 Conroe Intel Celeron_4x0 (Conroe/Merom Class Core 2) : Also added is "-cpu ?dump" which exhaustively outputs all config data for all defined models, and "-cpu ?cpuid" which enumerates all qemu recognized CPUID feature flags. The pseudo cpuid flag 'check' when added to the feature flag list will warn when feature flags (either implicit in a cpu model or explicit on the command line) would have otherwise been quietly unavailable to a guest: # qemu-system-x86_64 ... -cpu Nehalem,check warning: host cpuid 0000_0001 lacks requested flag 'sse4.2|sse4_2' [0x00100000] warning: host cpuid 0000_0001 lacks requested flag 'popcnt' [0x00800000] A similar 'enforce' pseudo flag exists which in addition to the above causes qemu to error exit if requested flags are unavailable. Configuration data for a cpu model resides in the target config file which by default will be installed as: /usr/local/etc/qemu/target-<arch>.conf The format of this file should be self explanatory given the definitions for the above six models and essentially mimics the structure of the static x86_def_t x86_defs. Encoding of cpuid flags names now allows aliases for both the configuration file and the command line which reconciles some Intel/AMD/Linux/Qemu naming differences. This patch was tested relative to qemu.git. Signed-off-by: john cooper <john.cooper@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-20 20:14:59 +03:00
extfeature_ecx = "svm lahf_lm"
xlevel = "0x80000008"
model_id = "AMD Opteron 22xx (Gen 2 Class Opteron)"
[cpudef]
name = "Opteron_G3"
level = "5"
vendor = "AuthenticAMD"
family = "15"
model = "6"
stepping = "1"
feature_edx = "sse2 sse fxsr mmx clflush pse36 pat cmov mca pge mtrr sep apic cx8 mce pae msr tsc pse de fpu"
feature_ecx = "popcnt cx16 monitor sse3"
cpu defs: add pse36, mca, mtrr to AMD CPU definitions (v2) This patch adds some missing flags to extfeature_edx, that were missing according to AMD's latest CPUID document. This is based on a previous patch from John Cooper where this was introduced with many other changes at the same time. Original John's patch submission is at Message-ID: <4DDAD5E7.2020002@redhat.com>, <http://marc.info/?l=qemu-devel&m=130618871926030>. Original John's patch description was: cpu model bug fixes and definition corrections This patch was intended to address the replicated feature flags in cpuid 8000_0001:edx from cpuid 0000_0001:edx. This is due to AMD's definition where these flags are mostly cloned in the 8000_0001:edx cpuid function. qemu64 attempted to glue together the respective Intel and AMD nearly disjoint features and this propagated to the new Intel models as doing so was believed conservative at the time. However after further soak and test lugging around this cruft doesn't provide any value, could conceivably confuse a guest, and has confused users trying to maintain/add cpu definitions. This also caused issues for libvirt attempting to track this mis-encoding. So we've here tossed out the AMD replicated definitions from the Intel models, added a few replications into AMD definitions which were missing according to AMD's latest CPUID document, and reordered the config file flags to follow intuitive sequential bit ordering. Also two flag name aliases were added for clarity to Intel models. The end result being the models definitions now conform to their respective cpuid specifications sans x2apic which is emulated by kvm. This was tested with the following combinations: [Conroe, Penryn, Nehalem] x [F12-64, win64, win32] -- Intel host [Opteron_G1, Opteron_G2, Opteron_G3] x [F12-64, win64, win32] -- AMD host Yielding successful boots in all cases. Signed-off-by: john cooper <john.cooper@redhat.com> Changes v1 -> v2: - Rebase against latest Qemu git tree Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-17 20:41:22 +04:00
extfeature_edx = "lm rdtscp fxsr mmx nx pse36 pat cmov mca pge mtrr syscall apic cx8 mce pae msr tsc pse de fpu"
extfeature_ecx = "misalignsse sse4a abm svm lahf_lm"
Add cpu model configuration support.. This is a reimplementation of prior versions which adds the ability to define cpu models for contemporary processors. The added models are likewise selected via -cpu <name>, and are intended to displace the existing convention of "-cpu qemu64" augmented with a series of feature flags. A primary motivation was determination of a least common denominator within a given processor class to simplify guest migration. It is still possible to modify an arbitrary model via additional feature flags however the goal here was to make doing so unnecessary in typical usage. The other consideration was providing models names reflective of current processors. Both AMD and Intel have reviewed the models in terms of balancing generality of migration vs. excessive feature downgrade relative to released silicon. This version of the patch replaces the prior hard wired definitions with a configuration file approach for new models. Existing models are thus far left as-is but may easily be transitioned to (or may be overridden by) the configuration file representation. Proposed new model definitions are provided here for current AMD and Intel processors. Each model consists of a name used to select it on the command line (-cpu <name>), and a model_id which corresponds to a least common denominator commercial instance of the processor class. A table of names/model_ids may be queried via "-cpu ?model": : x86 Opteron_G3 AMD Opteron 23xx (Gen 3 Class Opteron) x86 Opteron_G2 AMD Opteron 22xx (Gen 2 Class Opteron) x86 Opteron_G1 AMD Opteron 240 (Gen 1 Class Opteron) x86 Nehalem Intel Core i7 9xx (Nehalem Class Core i7) x86 Penryn Intel Core 2 Duo P9xxx (Penryn Class Core 2) x86 Conroe Intel Celeron_4x0 (Conroe/Merom Class Core 2) : Also added is "-cpu ?dump" which exhaustively outputs all config data for all defined models, and "-cpu ?cpuid" which enumerates all qemu recognized CPUID feature flags. The pseudo cpuid flag 'check' when added to the feature flag list will warn when feature flags (either implicit in a cpu model or explicit on the command line) would have otherwise been quietly unavailable to a guest: # qemu-system-x86_64 ... -cpu Nehalem,check warning: host cpuid 0000_0001 lacks requested flag 'sse4.2|sse4_2' [0x00100000] warning: host cpuid 0000_0001 lacks requested flag 'popcnt' [0x00800000] A similar 'enforce' pseudo flag exists which in addition to the above causes qemu to error exit if requested flags are unavailable. Configuration data for a cpu model resides in the target config file which by default will be installed as: /usr/local/etc/qemu/target-<arch>.conf The format of this file should be self explanatory given the definitions for the above six models and essentially mimics the structure of the static x86_def_t x86_defs. Encoding of cpuid flags names now allows aliases for both the configuration file and the command line which reconciles some Intel/AMD/Linux/Qemu naming differences. This patch was tested relative to qemu.git. Signed-off-by: john cooper <john.cooper@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-20 20:14:59 +03:00
xlevel = "0x80000008"
model_id = "AMD Opteron 23xx (Gen 3 Class Opteron)"