qemu/block/copy-before-write.c

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

564 lines
16 KiB
C
Raw Normal View History

/*
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 11:38:27 +03:00
* copy-before-write filter driver
*
* The driver performs Copy-Before-Write (CBW) operation: it is injected above
* some node, and before each write it copies _old_ data to the target node.
*
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 11:38:27 +03:00
* Copyright (c) 2018-2021 Virtuozzo International GmbH.
*
* Author:
* Sementsov-Ogievskiy Vladimir <vsementsov@virtuozzo.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "qemu/osdep.h"
#include "qapi/qmp/qjson.h"
#include "sysemu/block-backend.h"
#include "qemu/cutils.h"
#include "qapi/error.h"
#include "block/block_int.h"
#include "block/qdict.h"
#include "block/block-copy.h"
#include "block/dirty-bitmap.h"
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 11:38:27 +03:00
#include "block/copy-before-write.h"
block: copy-before-write: realize snapshot-access API Current scheme of image fleecing looks like this: [guest] [NBD export] | | |root | root v v [copy-before-write] -----> [temp.qcow2] | target | |file |backing v | [active disk] <-------------+ - On guest writes copy-before-write filter copies old data from active disk to temp.qcow2. So fleecing client (NBD export) when reads changed regions from temp.qcow2 image and unchanged from active disk through backing link. This patch makes possible new image fleecing scheme: [guest] [NBD export] | | | root | root v file v [copy-before-write]<------[snapshot-access] | | | file | target v v [active-disk] [temp.img] - copy-before-write does CBW operations and also provides snapshot-access API. The API may be accessed through snapshot-access driver. Benefits of new scheme: 1. Access control: if remote client try to read data that not covered by original dirty bitmap used on copy-before-write open, client gets -EACCES. 2. Discard support: if remote client do DISCARD, this additionally to discarding data in temp.img informs block-copy process to not copy these clusters. Next read from discarded area will return -EACCES. This is significant thing: when fleecing user reads data that was not yet copied to temp.img, we can avoid copying it on further guest write. 3. Synchronisation between client reads and block-copy write is more efficient. In old scheme we just rely on BDRV_REQ_SERIALISING flag used for writes to temp.qcow2. New scheme is less blocking: - fleecing reads are never blocked: if data region is untouched or in-flight, we just read from active-disk, otherwise we read from temp.img - writes to temp.img are not blocked by fleecing reads - still, guest writes of-course are blocked by in-flight fleecing reads, that currently read from active-disk - it's the minimum necessary blocking 4. Temporary image may be of any format, as we don't rely on backing feature. 5. Permission relation are simplified. With old scheme we have to share write permission on target child of copy-before-write, otherwise backing link conflicts with copy-before-write file child write permissions. With new scheme we don't have backing link, and copy-before-write node may have unshared access to temporary node. (Not realized in this commit, will be in future). 6. Having control on fleecing reads we'll be able to implement alternative behavior on failed copy-before-write operations. Currently we just break guest request (that's a historical behavior of backup). But in some scenarios it's a bad behavior: better is to drop the backup as failed but don't break guest request. With new scheme we can simply unset some bits in a bitmap on CBW failure and further fleecing reads will -EACCES, or something like this. (Not implemented in this commit, will be in future) Additional application for this is implementing timeout for CBW operations. Iotest 257 output is updated, as two more bitmaps now live in copy-before-write filter. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20220303194349.2304213-13-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-03-03 22:43:45 +03:00
#include "block/reqlist.h"
#include "qapi/qapi-visit-block-core.h"
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 11:38:27 +03:00
typedef struct BDRVCopyBeforeWriteState {
BlockCopyState *bcs;
BdrvChild *target;
OnCbwError on_cbw_error;
uint32_t cbw_timeout_ns;
block: copy-before-write: realize snapshot-access API Current scheme of image fleecing looks like this: [guest] [NBD export] | | |root | root v v [copy-before-write] -----> [temp.qcow2] | target | |file |backing v | [active disk] <-------------+ - On guest writes copy-before-write filter copies old data from active disk to temp.qcow2. So fleecing client (NBD export) when reads changed regions from temp.qcow2 image and unchanged from active disk through backing link. This patch makes possible new image fleecing scheme: [guest] [NBD export] | | | root | root v file v [copy-before-write]<------[snapshot-access] | | | file | target v v [active-disk] [temp.img] - copy-before-write does CBW operations and also provides snapshot-access API. The API may be accessed through snapshot-access driver. Benefits of new scheme: 1. Access control: if remote client try to read data that not covered by original dirty bitmap used on copy-before-write open, client gets -EACCES. 2. Discard support: if remote client do DISCARD, this additionally to discarding data in temp.img informs block-copy process to not copy these clusters. Next read from discarded area will return -EACCES. This is significant thing: when fleecing user reads data that was not yet copied to temp.img, we can avoid copying it on further guest write. 3. Synchronisation between client reads and block-copy write is more efficient. In old scheme we just rely on BDRV_REQ_SERIALISING flag used for writes to temp.qcow2. New scheme is less blocking: - fleecing reads are never blocked: if data region is untouched or in-flight, we just read from active-disk, otherwise we read from temp.img - writes to temp.img are not blocked by fleecing reads - still, guest writes of-course are blocked by in-flight fleecing reads, that currently read from active-disk - it's the minimum necessary blocking 4. Temporary image may be of any format, as we don't rely on backing feature. 5. Permission relation are simplified. With old scheme we have to share write permission on target child of copy-before-write, otherwise backing link conflicts with copy-before-write file child write permissions. With new scheme we don't have backing link, and copy-before-write node may have unshared access to temporary node. (Not realized in this commit, will be in future). 6. Having control on fleecing reads we'll be able to implement alternative behavior on failed copy-before-write operations. Currently we just break guest request (that's a historical behavior of backup). But in some scenarios it's a bad behavior: better is to drop the backup as failed but don't break guest request. With new scheme we can simply unset some bits in a bitmap on CBW failure and further fleecing reads will -EACCES, or something like this. (Not implemented in this commit, will be in future) Additional application for this is implementing timeout for CBW operations. Iotest 257 output is updated, as two more bitmaps now live in copy-before-write filter. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20220303194349.2304213-13-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-03-03 22:43:45 +03:00
/*
* @lock: protects access to @access_bitmap, @done_bitmap and
* @frozen_read_reqs
*/
CoMutex lock;
/*
* @access_bitmap: represents areas allowed for reading by fleecing user.
* Reading from non-dirty areas leads to -EACCES.
*/
BdrvDirtyBitmap *access_bitmap;
/*
* @done_bitmap: represents areas that was successfully copied to @target by
* copy-before-write operations.
*/
BdrvDirtyBitmap *done_bitmap;
/*
* @frozen_read_reqs: current read requests for fleecing user in bs->file
* node. These areas must not be rewritten by guest.
*/
BlockReqList frozen_read_reqs;
/*
* @snapshot_error is normally zero. But on first copy-before-write failure
* when @on_cbw_error == ON_CBW_ERROR_BREAK_SNAPSHOT, @snapshot_error takes
* value of this error (<0). After that all in-flight and further
* snapshot-API requests will fail with that error.
*/
int snapshot_error;
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 11:38:27 +03:00
} BDRVCopyBeforeWriteState;
static int coroutine_fn GRAPH_RDLOCK
cbw_co_preadv(BlockDriverState *bs, int64_t offset, int64_t bytes,
QEMUIOVector *qiov, BdrvRequestFlags flags)
{
return bdrv_co_preadv(bs->file, offset, bytes, qiov, flags);
}
static void block_copy_cb(void *opaque)
{
BlockDriverState *bs = opaque;
bdrv_dec_in_flight(bs);
}
block: copy-before-write: realize snapshot-access API Current scheme of image fleecing looks like this: [guest] [NBD export] | | |root | root v v [copy-before-write] -----> [temp.qcow2] | target | |file |backing v | [active disk] <-------------+ - On guest writes copy-before-write filter copies old data from active disk to temp.qcow2. So fleecing client (NBD export) when reads changed regions from temp.qcow2 image and unchanged from active disk through backing link. This patch makes possible new image fleecing scheme: [guest] [NBD export] | | | root | root v file v [copy-before-write]<------[snapshot-access] | | | file | target v v [active-disk] [temp.img] - copy-before-write does CBW operations and also provides snapshot-access API. The API may be accessed through snapshot-access driver. Benefits of new scheme: 1. Access control: if remote client try to read data that not covered by original dirty bitmap used on copy-before-write open, client gets -EACCES. 2. Discard support: if remote client do DISCARD, this additionally to discarding data in temp.img informs block-copy process to not copy these clusters. Next read from discarded area will return -EACCES. This is significant thing: when fleecing user reads data that was not yet copied to temp.img, we can avoid copying it on further guest write. 3. Synchronisation between client reads and block-copy write is more efficient. In old scheme we just rely on BDRV_REQ_SERIALISING flag used for writes to temp.qcow2. New scheme is less blocking: - fleecing reads are never blocked: if data region is untouched or in-flight, we just read from active-disk, otherwise we read from temp.img - writes to temp.img are not blocked by fleecing reads - still, guest writes of-course are blocked by in-flight fleecing reads, that currently read from active-disk - it's the minimum necessary blocking 4. Temporary image may be of any format, as we don't rely on backing feature. 5. Permission relation are simplified. With old scheme we have to share write permission on target child of copy-before-write, otherwise backing link conflicts with copy-before-write file child write permissions. With new scheme we don't have backing link, and copy-before-write node may have unshared access to temporary node. (Not realized in this commit, will be in future). 6. Having control on fleecing reads we'll be able to implement alternative behavior on failed copy-before-write operations. Currently we just break guest request (that's a historical behavior of backup). But in some scenarios it's a bad behavior: better is to drop the backup as failed but don't break guest request. With new scheme we can simply unset some bits in a bitmap on CBW failure and further fleecing reads will -EACCES, or something like this. (Not implemented in this commit, will be in future) Additional application for this is implementing timeout for CBW operations. Iotest 257 output is updated, as two more bitmaps now live in copy-before-write filter. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20220303194349.2304213-13-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-03-03 22:43:45 +03:00
/*
* Do copy-before-write operation.
*
* On failure guest request must be failed too.
*
* On success, we also wait for all in-flight fleecing read requests in source
* node, and it's guaranteed that after cbw_do_copy_before_write() successful
* return there are no such requests and they will never appear.
*/
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 11:38:27 +03:00
static coroutine_fn int cbw_do_copy_before_write(BlockDriverState *bs,
uint64_t offset, uint64_t bytes, BdrvRequestFlags flags)
{
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 11:38:27 +03:00
BDRVCopyBeforeWriteState *s = bs->opaque;
block: copy-before-write: realize snapshot-access API Current scheme of image fleecing looks like this: [guest] [NBD export] | | |root | root v v [copy-before-write] -----> [temp.qcow2] | target | |file |backing v | [active disk] <-------------+ - On guest writes copy-before-write filter copies old data from active disk to temp.qcow2. So fleecing client (NBD export) when reads changed regions from temp.qcow2 image and unchanged from active disk through backing link. This patch makes possible new image fleecing scheme: [guest] [NBD export] | | | root | root v file v [copy-before-write]<------[snapshot-access] | | | file | target v v [active-disk] [temp.img] - copy-before-write does CBW operations and also provides snapshot-access API. The API may be accessed through snapshot-access driver. Benefits of new scheme: 1. Access control: if remote client try to read data that not covered by original dirty bitmap used on copy-before-write open, client gets -EACCES. 2. Discard support: if remote client do DISCARD, this additionally to discarding data in temp.img informs block-copy process to not copy these clusters. Next read from discarded area will return -EACCES. This is significant thing: when fleecing user reads data that was not yet copied to temp.img, we can avoid copying it on further guest write. 3. Synchronisation between client reads and block-copy write is more efficient. In old scheme we just rely on BDRV_REQ_SERIALISING flag used for writes to temp.qcow2. New scheme is less blocking: - fleecing reads are never blocked: if data region is untouched or in-flight, we just read from active-disk, otherwise we read from temp.img - writes to temp.img are not blocked by fleecing reads - still, guest writes of-course are blocked by in-flight fleecing reads, that currently read from active-disk - it's the minimum necessary blocking 4. Temporary image may be of any format, as we don't rely on backing feature. 5. Permission relation are simplified. With old scheme we have to share write permission on target child of copy-before-write, otherwise backing link conflicts with copy-before-write file child write permissions. With new scheme we don't have backing link, and copy-before-write node may have unshared access to temporary node. (Not realized in this commit, will be in future). 6. Having control on fleecing reads we'll be able to implement alternative behavior on failed copy-before-write operations. Currently we just break guest request (that's a historical behavior of backup). But in some scenarios it's a bad behavior: better is to drop the backup as failed but don't break guest request. With new scheme we can simply unset some bits in a bitmap on CBW failure and further fleecing reads will -EACCES, or something like this. (Not implemented in this commit, will be in future) Additional application for this is implementing timeout for CBW operations. Iotest 257 output is updated, as two more bitmaps now live in copy-before-write filter. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20220303194349.2304213-13-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-03-03 22:43:45 +03:00
int ret;
uint64_t off, end;
int64_t cluster_size = block_copy_cluster_size(s->bcs);
if (flags & BDRV_REQ_WRITE_UNCHANGED) {
return 0;
}
if (s->snapshot_error) {
return 0;
}
off = QEMU_ALIGN_DOWN(offset, cluster_size);
end = QEMU_ALIGN_UP(offset + bytes, cluster_size);
/*
* Increase in_flight, so that in case of timed-out block-copy, the
* remaining background block_copy() request (which can't be immediately
* cancelled by timeout) is presented in bs->in_flight. This way we are
* sure that on bs close() we'll previously wait for all timed-out but yet
* running block_copy calls.
*/
bdrv_inc_in_flight(bs);
ret = block_copy(s->bcs, off, end - off, true, s->cbw_timeout_ns,
block_copy_cb, bs);
if (ret < 0 && s->on_cbw_error == ON_CBW_ERROR_BREAK_GUEST_WRITE) {
block: copy-before-write: realize snapshot-access API Current scheme of image fleecing looks like this: [guest] [NBD export] | | |root | root v v [copy-before-write] -----> [temp.qcow2] | target | |file |backing v | [active disk] <-------------+ - On guest writes copy-before-write filter copies old data from active disk to temp.qcow2. So fleecing client (NBD export) when reads changed regions from temp.qcow2 image and unchanged from active disk through backing link. This patch makes possible new image fleecing scheme: [guest] [NBD export] | | | root | root v file v [copy-before-write]<------[snapshot-access] | | | file | target v v [active-disk] [temp.img] - copy-before-write does CBW operations and also provides snapshot-access API. The API may be accessed through snapshot-access driver. Benefits of new scheme: 1. Access control: if remote client try to read data that not covered by original dirty bitmap used on copy-before-write open, client gets -EACCES. 2. Discard support: if remote client do DISCARD, this additionally to discarding data in temp.img informs block-copy process to not copy these clusters. Next read from discarded area will return -EACCES. This is significant thing: when fleecing user reads data that was not yet copied to temp.img, we can avoid copying it on further guest write. 3. Synchronisation between client reads and block-copy write is more efficient. In old scheme we just rely on BDRV_REQ_SERIALISING flag used for writes to temp.qcow2. New scheme is less blocking: - fleecing reads are never blocked: if data region is untouched or in-flight, we just read from active-disk, otherwise we read from temp.img - writes to temp.img are not blocked by fleecing reads - still, guest writes of-course are blocked by in-flight fleecing reads, that currently read from active-disk - it's the minimum necessary blocking 4. Temporary image may be of any format, as we don't rely on backing feature. 5. Permission relation are simplified. With old scheme we have to share write permission on target child of copy-before-write, otherwise backing link conflicts with copy-before-write file child write permissions. With new scheme we don't have backing link, and copy-before-write node may have unshared access to temporary node. (Not realized in this commit, will be in future). 6. Having control on fleecing reads we'll be able to implement alternative behavior on failed copy-before-write operations. Currently we just break guest request (that's a historical behavior of backup). But in some scenarios it's a bad behavior: better is to drop the backup as failed but don't break guest request. With new scheme we can simply unset some bits in a bitmap on CBW failure and further fleecing reads will -EACCES, or something like this. (Not implemented in this commit, will be in future) Additional application for this is implementing timeout for CBW operations. Iotest 257 output is updated, as two more bitmaps now live in copy-before-write filter. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20220303194349.2304213-13-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-03-03 22:43:45 +03:00
return ret;
}
WITH_QEMU_LOCK_GUARD(&s->lock) {
if (ret < 0) {
assert(s->on_cbw_error == ON_CBW_ERROR_BREAK_SNAPSHOT);
if (!s->snapshot_error) {
s->snapshot_error = ret;
}
} else {
bdrv_set_dirty_bitmap(s->done_bitmap, off, end - off);
}
block: copy-before-write: realize snapshot-access API Current scheme of image fleecing looks like this: [guest] [NBD export] | | |root | root v v [copy-before-write] -----> [temp.qcow2] | target | |file |backing v | [active disk] <-------------+ - On guest writes copy-before-write filter copies old data from active disk to temp.qcow2. So fleecing client (NBD export) when reads changed regions from temp.qcow2 image and unchanged from active disk through backing link. This patch makes possible new image fleecing scheme: [guest] [NBD export] | | | root | root v file v [copy-before-write]<------[snapshot-access] | | | file | target v v [active-disk] [temp.img] - copy-before-write does CBW operations and also provides snapshot-access API. The API may be accessed through snapshot-access driver. Benefits of new scheme: 1. Access control: if remote client try to read data that not covered by original dirty bitmap used on copy-before-write open, client gets -EACCES. 2. Discard support: if remote client do DISCARD, this additionally to discarding data in temp.img informs block-copy process to not copy these clusters. Next read from discarded area will return -EACCES. This is significant thing: when fleecing user reads data that was not yet copied to temp.img, we can avoid copying it on further guest write. 3. Synchronisation between client reads and block-copy write is more efficient. In old scheme we just rely on BDRV_REQ_SERIALISING flag used for writes to temp.qcow2. New scheme is less blocking: - fleecing reads are never blocked: if data region is untouched or in-flight, we just read from active-disk, otherwise we read from temp.img - writes to temp.img are not blocked by fleecing reads - still, guest writes of-course are blocked by in-flight fleecing reads, that currently read from active-disk - it's the minimum necessary blocking 4. Temporary image may be of any format, as we don't rely on backing feature. 5. Permission relation are simplified. With old scheme we have to share write permission on target child of copy-before-write, otherwise backing link conflicts with copy-before-write file child write permissions. With new scheme we don't have backing link, and copy-before-write node may have unshared access to temporary node. (Not realized in this commit, will be in future). 6. Having control on fleecing reads we'll be able to implement alternative behavior on failed copy-before-write operations. Currently we just break guest request (that's a historical behavior of backup). But in some scenarios it's a bad behavior: better is to drop the backup as failed but don't break guest request. With new scheme we can simply unset some bits in a bitmap on CBW failure and further fleecing reads will -EACCES, or something like this. (Not implemented in this commit, will be in future) Additional application for this is implementing timeout for CBW operations. Iotest 257 output is updated, as two more bitmaps now live in copy-before-write filter. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20220303194349.2304213-13-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-03-03 22:43:45 +03:00
reqlist_wait_all(&s->frozen_read_reqs, off, end - off, &s->lock);
}
return 0;
}
static int coroutine_fn GRAPH_RDLOCK
cbw_co_pdiscard(BlockDriverState *bs, int64_t offset, int64_t bytes)
{
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 11:38:27 +03:00
int ret = cbw_do_copy_before_write(bs, offset, bytes, 0);
if (ret < 0) {
return ret;
}
return bdrv_co_pdiscard(bs->file, offset, bytes);
}
static int coroutine_fn GRAPH_RDLOCK
cbw_co_pwrite_zeroes(BlockDriverState *bs, int64_t offset, int64_t bytes,
BdrvRequestFlags flags)
{
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 11:38:27 +03:00
int ret = cbw_do_copy_before_write(bs, offset, bytes, flags);
if (ret < 0) {
return ret;
}
return bdrv_co_pwrite_zeroes(bs->file, offset, bytes, flags);
}
static coroutine_fn GRAPH_RDLOCK
int cbw_co_pwritev(BlockDriverState *bs, int64_t offset, int64_t bytes,
QEMUIOVector *qiov, BdrvRequestFlags flags)
{
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 11:38:27 +03:00
int ret = cbw_do_copy_before_write(bs, offset, bytes, flags);
if (ret < 0) {
return ret;
}
return bdrv_co_pwritev(bs->file, offset, bytes, qiov, flags);
}
static int coroutine_fn GRAPH_RDLOCK cbw_co_flush(BlockDriverState *bs)
{
if (!bs->file) {
return 0;
}
return bdrv_co_flush(bs->file->bs);
}
block: copy-before-write: realize snapshot-access API Current scheme of image fleecing looks like this: [guest] [NBD export] | | |root | root v v [copy-before-write] -----> [temp.qcow2] | target | |file |backing v | [active disk] <-------------+ - On guest writes copy-before-write filter copies old data from active disk to temp.qcow2. So fleecing client (NBD export) when reads changed regions from temp.qcow2 image and unchanged from active disk through backing link. This patch makes possible new image fleecing scheme: [guest] [NBD export] | | | root | root v file v [copy-before-write]<------[snapshot-access] | | | file | target v v [active-disk] [temp.img] - copy-before-write does CBW operations and also provides snapshot-access API. The API may be accessed through snapshot-access driver. Benefits of new scheme: 1. Access control: if remote client try to read data that not covered by original dirty bitmap used on copy-before-write open, client gets -EACCES. 2. Discard support: if remote client do DISCARD, this additionally to discarding data in temp.img informs block-copy process to not copy these clusters. Next read from discarded area will return -EACCES. This is significant thing: when fleecing user reads data that was not yet copied to temp.img, we can avoid copying it on further guest write. 3. Synchronisation between client reads and block-copy write is more efficient. In old scheme we just rely on BDRV_REQ_SERIALISING flag used for writes to temp.qcow2. New scheme is less blocking: - fleecing reads are never blocked: if data region is untouched or in-flight, we just read from active-disk, otherwise we read from temp.img - writes to temp.img are not blocked by fleecing reads - still, guest writes of-course are blocked by in-flight fleecing reads, that currently read from active-disk - it's the minimum necessary blocking 4. Temporary image may be of any format, as we don't rely on backing feature. 5. Permission relation are simplified. With old scheme we have to share write permission on target child of copy-before-write, otherwise backing link conflicts with copy-before-write file child write permissions. With new scheme we don't have backing link, and copy-before-write node may have unshared access to temporary node. (Not realized in this commit, will be in future). 6. Having control on fleecing reads we'll be able to implement alternative behavior on failed copy-before-write operations. Currently we just break guest request (that's a historical behavior of backup). But in some scenarios it's a bad behavior: better is to drop the backup as failed but don't break guest request. With new scheme we can simply unset some bits in a bitmap on CBW failure and further fleecing reads will -EACCES, or something like this. (Not implemented in this commit, will be in future) Additional application for this is implementing timeout for CBW operations. Iotest 257 output is updated, as two more bitmaps now live in copy-before-write filter. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20220303194349.2304213-13-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-03-03 22:43:45 +03:00
/*
* If @offset not accessible - return NULL.
*
* Otherwise, set @pnum to some bytes that accessible from @file (@file is set
* to bs->file or to s->target). Return newly allocated BlockReq object that
* should be than passed to cbw_snapshot_read_unlock().
*
* It's guaranteed that guest writes will not interact in the region until
* cbw_snapshot_read_unlock() called.
*/
static coroutine_fn BlockReq *
cbw_snapshot_read_lock(BlockDriverState *bs, int64_t offset, int64_t bytes,
int64_t *pnum, BdrvChild **file)
block: copy-before-write: realize snapshot-access API Current scheme of image fleecing looks like this: [guest] [NBD export] | | |root | root v v [copy-before-write] -----> [temp.qcow2] | target | |file |backing v | [active disk] <-------------+ - On guest writes copy-before-write filter copies old data from active disk to temp.qcow2. So fleecing client (NBD export) when reads changed regions from temp.qcow2 image and unchanged from active disk through backing link. This patch makes possible new image fleecing scheme: [guest] [NBD export] | | | root | root v file v [copy-before-write]<------[snapshot-access] | | | file | target v v [active-disk] [temp.img] - copy-before-write does CBW operations and also provides snapshot-access API. The API may be accessed through snapshot-access driver. Benefits of new scheme: 1. Access control: if remote client try to read data that not covered by original dirty bitmap used on copy-before-write open, client gets -EACCES. 2. Discard support: if remote client do DISCARD, this additionally to discarding data in temp.img informs block-copy process to not copy these clusters. Next read from discarded area will return -EACCES. This is significant thing: when fleecing user reads data that was not yet copied to temp.img, we can avoid copying it on further guest write. 3. Synchronisation between client reads and block-copy write is more efficient. In old scheme we just rely on BDRV_REQ_SERIALISING flag used for writes to temp.qcow2. New scheme is less blocking: - fleecing reads are never blocked: if data region is untouched or in-flight, we just read from active-disk, otherwise we read from temp.img - writes to temp.img are not blocked by fleecing reads - still, guest writes of-course are blocked by in-flight fleecing reads, that currently read from active-disk - it's the minimum necessary blocking 4. Temporary image may be of any format, as we don't rely on backing feature. 5. Permission relation are simplified. With old scheme we have to share write permission on target child of copy-before-write, otherwise backing link conflicts with copy-before-write file child write permissions. With new scheme we don't have backing link, and copy-before-write node may have unshared access to temporary node. (Not realized in this commit, will be in future). 6. Having control on fleecing reads we'll be able to implement alternative behavior on failed copy-before-write operations. Currently we just break guest request (that's a historical behavior of backup). But in some scenarios it's a bad behavior: better is to drop the backup as failed but don't break guest request. With new scheme we can simply unset some bits in a bitmap on CBW failure and further fleecing reads will -EACCES, or something like this. (Not implemented in this commit, will be in future) Additional application for this is implementing timeout for CBW operations. Iotest 257 output is updated, as two more bitmaps now live in copy-before-write filter. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20220303194349.2304213-13-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-03-03 22:43:45 +03:00
{
BDRVCopyBeforeWriteState *s = bs->opaque;
BlockReq *req = g_new(BlockReq, 1);
bool done;
QEMU_LOCK_GUARD(&s->lock);
if (s->snapshot_error) {
g_free(req);
return NULL;
}
block: copy-before-write: realize snapshot-access API Current scheme of image fleecing looks like this: [guest] [NBD export] | | |root | root v v [copy-before-write] -----> [temp.qcow2] | target | |file |backing v | [active disk] <-------------+ - On guest writes copy-before-write filter copies old data from active disk to temp.qcow2. So fleecing client (NBD export) when reads changed regions from temp.qcow2 image and unchanged from active disk through backing link. This patch makes possible new image fleecing scheme: [guest] [NBD export] | | | root | root v file v [copy-before-write]<------[snapshot-access] | | | file | target v v [active-disk] [temp.img] - copy-before-write does CBW operations and also provides snapshot-access API. The API may be accessed through snapshot-access driver. Benefits of new scheme: 1. Access control: if remote client try to read data that not covered by original dirty bitmap used on copy-before-write open, client gets -EACCES. 2. Discard support: if remote client do DISCARD, this additionally to discarding data in temp.img informs block-copy process to not copy these clusters. Next read from discarded area will return -EACCES. This is significant thing: when fleecing user reads data that was not yet copied to temp.img, we can avoid copying it on further guest write. 3. Synchronisation between client reads and block-copy write is more efficient. In old scheme we just rely on BDRV_REQ_SERIALISING flag used for writes to temp.qcow2. New scheme is less blocking: - fleecing reads are never blocked: if data region is untouched or in-flight, we just read from active-disk, otherwise we read from temp.img - writes to temp.img are not blocked by fleecing reads - still, guest writes of-course are blocked by in-flight fleecing reads, that currently read from active-disk - it's the minimum necessary blocking 4. Temporary image may be of any format, as we don't rely on backing feature. 5. Permission relation are simplified. With old scheme we have to share write permission on target child of copy-before-write, otherwise backing link conflicts with copy-before-write file child write permissions. With new scheme we don't have backing link, and copy-before-write node may have unshared access to temporary node. (Not realized in this commit, will be in future). 6. Having control on fleecing reads we'll be able to implement alternative behavior on failed copy-before-write operations. Currently we just break guest request (that's a historical behavior of backup). But in some scenarios it's a bad behavior: better is to drop the backup as failed but don't break guest request. With new scheme we can simply unset some bits in a bitmap on CBW failure and further fleecing reads will -EACCES, or something like this. (Not implemented in this commit, will be in future) Additional application for this is implementing timeout for CBW operations. Iotest 257 output is updated, as two more bitmaps now live in copy-before-write filter. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20220303194349.2304213-13-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-03-03 22:43:45 +03:00
if (bdrv_dirty_bitmap_next_zero(s->access_bitmap, offset, bytes) != -1) {
g_free(req);
return NULL;
}
done = bdrv_dirty_bitmap_status(s->done_bitmap, offset, bytes, pnum);
if (done) {
/*
* Special invalid BlockReq, that is handled in
* cbw_snapshot_read_unlock(). We don't need to lock something to read
* from s->target.
*/
*req = (BlockReq) {.offset = -1, .bytes = -1};
*file = s->target;
} else {
reqlist_init_req(&s->frozen_read_reqs, req, offset, bytes);
*file = bs->file;
}
return req;
}
static coroutine_fn void
cbw_snapshot_read_unlock(BlockDriverState *bs, BlockReq *req)
block: copy-before-write: realize snapshot-access API Current scheme of image fleecing looks like this: [guest] [NBD export] | | |root | root v v [copy-before-write] -----> [temp.qcow2] | target | |file |backing v | [active disk] <-------------+ - On guest writes copy-before-write filter copies old data from active disk to temp.qcow2. So fleecing client (NBD export) when reads changed regions from temp.qcow2 image and unchanged from active disk through backing link. This patch makes possible new image fleecing scheme: [guest] [NBD export] | | | root | root v file v [copy-before-write]<------[snapshot-access] | | | file | target v v [active-disk] [temp.img] - copy-before-write does CBW operations and also provides snapshot-access API. The API may be accessed through snapshot-access driver. Benefits of new scheme: 1. Access control: if remote client try to read data that not covered by original dirty bitmap used on copy-before-write open, client gets -EACCES. 2. Discard support: if remote client do DISCARD, this additionally to discarding data in temp.img informs block-copy process to not copy these clusters. Next read from discarded area will return -EACCES. This is significant thing: when fleecing user reads data that was not yet copied to temp.img, we can avoid copying it on further guest write. 3. Synchronisation between client reads and block-copy write is more efficient. In old scheme we just rely on BDRV_REQ_SERIALISING flag used for writes to temp.qcow2. New scheme is less blocking: - fleecing reads are never blocked: if data region is untouched or in-flight, we just read from active-disk, otherwise we read from temp.img - writes to temp.img are not blocked by fleecing reads - still, guest writes of-course are blocked by in-flight fleecing reads, that currently read from active-disk - it's the minimum necessary blocking 4. Temporary image may be of any format, as we don't rely on backing feature. 5. Permission relation are simplified. With old scheme we have to share write permission on target child of copy-before-write, otherwise backing link conflicts with copy-before-write file child write permissions. With new scheme we don't have backing link, and copy-before-write node may have unshared access to temporary node. (Not realized in this commit, will be in future). 6. Having control on fleecing reads we'll be able to implement alternative behavior on failed copy-before-write operations. Currently we just break guest request (that's a historical behavior of backup). But in some scenarios it's a bad behavior: better is to drop the backup as failed but don't break guest request. With new scheme we can simply unset some bits in a bitmap on CBW failure and further fleecing reads will -EACCES, or something like this. (Not implemented in this commit, will be in future) Additional application for this is implementing timeout for CBW operations. Iotest 257 output is updated, as two more bitmaps now live in copy-before-write filter. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20220303194349.2304213-13-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-03-03 22:43:45 +03:00
{
BDRVCopyBeforeWriteState *s = bs->opaque;
if (req->offset == -1 && req->bytes == -1) {
g_free(req);
return;
}
QEMU_LOCK_GUARD(&s->lock);
reqlist_remove_req(req);
g_free(req);
}
static int coroutine_fn GRAPH_RDLOCK
block: copy-before-write: realize snapshot-access API Current scheme of image fleecing looks like this: [guest] [NBD export] | | |root | root v v [copy-before-write] -----> [temp.qcow2] | target | |file |backing v | [active disk] <-------------+ - On guest writes copy-before-write filter copies old data from active disk to temp.qcow2. So fleecing client (NBD export) when reads changed regions from temp.qcow2 image and unchanged from active disk through backing link. This patch makes possible new image fleecing scheme: [guest] [NBD export] | | | root | root v file v [copy-before-write]<------[snapshot-access] | | | file | target v v [active-disk] [temp.img] - copy-before-write does CBW operations and also provides snapshot-access API. The API may be accessed through snapshot-access driver. Benefits of new scheme: 1. Access control: if remote client try to read data that not covered by original dirty bitmap used on copy-before-write open, client gets -EACCES. 2. Discard support: if remote client do DISCARD, this additionally to discarding data in temp.img informs block-copy process to not copy these clusters. Next read from discarded area will return -EACCES. This is significant thing: when fleecing user reads data that was not yet copied to temp.img, we can avoid copying it on further guest write. 3. Synchronisation between client reads and block-copy write is more efficient. In old scheme we just rely on BDRV_REQ_SERIALISING flag used for writes to temp.qcow2. New scheme is less blocking: - fleecing reads are never blocked: if data region is untouched or in-flight, we just read from active-disk, otherwise we read from temp.img - writes to temp.img are not blocked by fleecing reads - still, guest writes of-course are blocked by in-flight fleecing reads, that currently read from active-disk - it's the minimum necessary blocking 4. Temporary image may be of any format, as we don't rely on backing feature. 5. Permission relation are simplified. With old scheme we have to share write permission on target child of copy-before-write, otherwise backing link conflicts with copy-before-write file child write permissions. With new scheme we don't have backing link, and copy-before-write node may have unshared access to temporary node. (Not realized in this commit, will be in future). 6. Having control on fleecing reads we'll be able to implement alternative behavior on failed copy-before-write operations. Currently we just break guest request (that's a historical behavior of backup). But in some scenarios it's a bad behavior: better is to drop the backup as failed but don't break guest request. With new scheme we can simply unset some bits in a bitmap on CBW failure and further fleecing reads will -EACCES, or something like this. (Not implemented in this commit, will be in future) Additional application for this is implementing timeout for CBW operations. Iotest 257 output is updated, as two more bitmaps now live in copy-before-write filter. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20220303194349.2304213-13-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-03-03 22:43:45 +03:00
cbw_co_preadv_snapshot(BlockDriverState *bs, int64_t offset, int64_t bytes,
QEMUIOVector *qiov, size_t qiov_offset)
{
BlockReq *req;
BdrvChild *file;
int ret;
/* TODO: upgrade to async loop using AioTask */
while (bytes) {
int64_t cur_bytes;
req = cbw_snapshot_read_lock(bs, offset, bytes, &cur_bytes, &file);
if (!req) {
return -EACCES;
}
ret = bdrv_co_preadv_part(file, offset, cur_bytes,
qiov, qiov_offset, 0);
cbw_snapshot_read_unlock(bs, req);
if (ret < 0) {
return ret;
}
bytes -= cur_bytes;
offset += cur_bytes;
qiov_offset += cur_bytes;
}
return 0;
}
static int coroutine_fn GRAPH_RDLOCK
block: copy-before-write: realize snapshot-access API Current scheme of image fleecing looks like this: [guest] [NBD export] | | |root | root v v [copy-before-write] -----> [temp.qcow2] | target | |file |backing v | [active disk] <-------------+ - On guest writes copy-before-write filter copies old data from active disk to temp.qcow2. So fleecing client (NBD export) when reads changed regions from temp.qcow2 image and unchanged from active disk through backing link. This patch makes possible new image fleecing scheme: [guest] [NBD export] | | | root | root v file v [copy-before-write]<------[snapshot-access] | | | file | target v v [active-disk] [temp.img] - copy-before-write does CBW operations and also provides snapshot-access API. The API may be accessed through snapshot-access driver. Benefits of new scheme: 1. Access control: if remote client try to read data that not covered by original dirty bitmap used on copy-before-write open, client gets -EACCES. 2. Discard support: if remote client do DISCARD, this additionally to discarding data in temp.img informs block-copy process to not copy these clusters. Next read from discarded area will return -EACCES. This is significant thing: when fleecing user reads data that was not yet copied to temp.img, we can avoid copying it on further guest write. 3. Synchronisation between client reads and block-copy write is more efficient. In old scheme we just rely on BDRV_REQ_SERIALISING flag used for writes to temp.qcow2. New scheme is less blocking: - fleecing reads are never blocked: if data region is untouched or in-flight, we just read from active-disk, otherwise we read from temp.img - writes to temp.img are not blocked by fleecing reads - still, guest writes of-course are blocked by in-flight fleecing reads, that currently read from active-disk - it's the minimum necessary blocking 4. Temporary image may be of any format, as we don't rely on backing feature. 5. Permission relation are simplified. With old scheme we have to share write permission on target child of copy-before-write, otherwise backing link conflicts with copy-before-write file child write permissions. With new scheme we don't have backing link, and copy-before-write node may have unshared access to temporary node. (Not realized in this commit, will be in future). 6. Having control on fleecing reads we'll be able to implement alternative behavior on failed copy-before-write operations. Currently we just break guest request (that's a historical behavior of backup). But in some scenarios it's a bad behavior: better is to drop the backup as failed but don't break guest request. With new scheme we can simply unset some bits in a bitmap on CBW failure and further fleecing reads will -EACCES, or something like this. (Not implemented in this commit, will be in future) Additional application for this is implementing timeout for CBW operations. Iotest 257 output is updated, as two more bitmaps now live in copy-before-write filter. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20220303194349.2304213-13-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-03-03 22:43:45 +03:00
cbw_co_snapshot_block_status(BlockDriverState *bs,
bool want_zero, int64_t offset, int64_t bytes,
int64_t *pnum, int64_t *map,
BlockDriverState **file)
{
BDRVCopyBeforeWriteState *s = bs->opaque;
BlockReq *req;
int ret;
int64_t cur_bytes;
BdrvChild *child;
req = cbw_snapshot_read_lock(bs, offset, bytes, &cur_bytes, &child);
if (!req) {
return -EACCES;
}
ret = bdrv_block_status(child->bs, offset, cur_bytes, pnum, map, file);
if (child == s->target) {
/*
* We refer to s->target only for areas that we've written to it.
* And we can not report unallocated blocks in s->target: this will
* break generic block-status-above logic, that will go to
* copy-before-write filtered child in this case.
*/
assert(ret & BDRV_BLOCK_ALLOCATED);
}
cbw_snapshot_read_unlock(bs, req);
return ret;
}
static int coroutine_fn GRAPH_RDLOCK
cbw_co_pdiscard_snapshot(BlockDriverState *bs, int64_t offset, int64_t bytes)
block: copy-before-write: realize snapshot-access API Current scheme of image fleecing looks like this: [guest] [NBD export] | | |root | root v v [copy-before-write] -----> [temp.qcow2] | target | |file |backing v | [active disk] <-------------+ - On guest writes copy-before-write filter copies old data from active disk to temp.qcow2. So fleecing client (NBD export) when reads changed regions from temp.qcow2 image and unchanged from active disk through backing link. This patch makes possible new image fleecing scheme: [guest] [NBD export] | | | root | root v file v [copy-before-write]<------[snapshot-access] | | | file | target v v [active-disk] [temp.img] - copy-before-write does CBW operations and also provides snapshot-access API. The API may be accessed through snapshot-access driver. Benefits of new scheme: 1. Access control: if remote client try to read data that not covered by original dirty bitmap used on copy-before-write open, client gets -EACCES. 2. Discard support: if remote client do DISCARD, this additionally to discarding data in temp.img informs block-copy process to not copy these clusters. Next read from discarded area will return -EACCES. This is significant thing: when fleecing user reads data that was not yet copied to temp.img, we can avoid copying it on further guest write. 3. Synchronisation between client reads and block-copy write is more efficient. In old scheme we just rely on BDRV_REQ_SERIALISING flag used for writes to temp.qcow2. New scheme is less blocking: - fleecing reads are never blocked: if data region is untouched or in-flight, we just read from active-disk, otherwise we read from temp.img - writes to temp.img are not blocked by fleecing reads - still, guest writes of-course are blocked by in-flight fleecing reads, that currently read from active-disk - it's the minimum necessary blocking 4. Temporary image may be of any format, as we don't rely on backing feature. 5. Permission relation are simplified. With old scheme we have to share write permission on target child of copy-before-write, otherwise backing link conflicts with copy-before-write file child write permissions. With new scheme we don't have backing link, and copy-before-write node may have unshared access to temporary node. (Not realized in this commit, will be in future). 6. Having control on fleecing reads we'll be able to implement alternative behavior on failed copy-before-write operations. Currently we just break guest request (that's a historical behavior of backup). But in some scenarios it's a bad behavior: better is to drop the backup as failed but don't break guest request. With new scheme we can simply unset some bits in a bitmap on CBW failure and further fleecing reads will -EACCES, or something like this. (Not implemented in this commit, will be in future) Additional application for this is implementing timeout for CBW operations. Iotest 257 output is updated, as two more bitmaps now live in copy-before-write filter. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20220303194349.2304213-13-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-03-03 22:43:45 +03:00
{
BDRVCopyBeforeWriteState *s = bs->opaque;
WITH_QEMU_LOCK_GUARD(&s->lock) {
bdrv_reset_dirty_bitmap(s->access_bitmap, offset, bytes);
}
block_copy_reset(s->bcs, offset, bytes);
return bdrv_co_pdiscard(s->target, offset, bytes);
}
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 11:38:27 +03:00
static void cbw_refresh_filename(BlockDriverState *bs)
{
pstrcpy(bs->exact_filename, sizeof(bs->exact_filename),
bs->file->bs->filename);
}
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 11:38:27 +03:00
static void cbw_child_perm(BlockDriverState *bs, BdrvChild *c,
BdrvChildRole role,
BlockReopenQueue *reopen_queue,
uint64_t perm, uint64_t shared,
uint64_t *nperm, uint64_t *nshared)
{
if (!(role & BDRV_CHILD_FILTERED)) {
/*
* Target child
*
* Share write to target (child_file), to not interfere
* with guest writes to its disk which may be in target backing chain.
* Can't resize during a backup block job because we check the size
* only upfront.
*/
*nshared = BLK_PERM_ALL & ~BLK_PERM_RESIZE;
*nperm = BLK_PERM_WRITE;
} else {
/* Source child */
bdrv_default_perms(bs, c, role, reopen_queue,
perm, shared, nperm, nshared);
if (!QLIST_EMPTY(&bs->parents)) {
if (perm & BLK_PERM_WRITE) {
*nperm = *nperm | BLK_PERM_CONSISTENT_READ;
}
*nshared &= ~(BLK_PERM_WRITE | BLK_PERM_RESIZE);
}
}
}
static BlockdevOptions *cbw_parse_options(QDict *options, Error **errp)
{
BlockdevOptions *opts = NULL;
Visitor *v = NULL;
qdict_put_str(options, "driver", "copy-before-write");
v = qobject_input_visitor_new_flat_confused(options, errp);
if (!v) {
goto out;
}
visit_type_BlockdevOptions(v, NULL, &opts, errp);
if (!opts) {
goto out;
}
/*
* Delete options which we are going to parse through BlockdevOptions
* object for original options.
*/
qdict_extract_subqdict(options, NULL, "bitmap");
qdict_del(options, "on-cbw-error");
qdict_del(options, "cbw-timeout");
out:
visit_free(v);
qdict_del(options, "driver");
return opts;
}
static int cbw_open(BlockDriverState *bs, QDict *options, int flags,
Error **errp)
{
BDRVCopyBeforeWriteState *s = bs->opaque;
BdrvDirtyBitmap *bitmap = NULL;
block: copy-before-write: realize snapshot-access API Current scheme of image fleecing looks like this: [guest] [NBD export] | | |root | root v v [copy-before-write] -----> [temp.qcow2] | target | |file |backing v | [active disk] <-------------+ - On guest writes copy-before-write filter copies old data from active disk to temp.qcow2. So fleecing client (NBD export) when reads changed regions from temp.qcow2 image and unchanged from active disk through backing link. This patch makes possible new image fleecing scheme: [guest] [NBD export] | | | root | root v file v [copy-before-write]<------[snapshot-access] | | | file | target v v [active-disk] [temp.img] - copy-before-write does CBW operations and also provides snapshot-access API. The API may be accessed through snapshot-access driver. Benefits of new scheme: 1. Access control: if remote client try to read data that not covered by original dirty bitmap used on copy-before-write open, client gets -EACCES. 2. Discard support: if remote client do DISCARD, this additionally to discarding data in temp.img informs block-copy process to not copy these clusters. Next read from discarded area will return -EACCES. This is significant thing: when fleecing user reads data that was not yet copied to temp.img, we can avoid copying it on further guest write. 3. Synchronisation between client reads and block-copy write is more efficient. In old scheme we just rely on BDRV_REQ_SERIALISING flag used for writes to temp.qcow2. New scheme is less blocking: - fleecing reads are never blocked: if data region is untouched or in-flight, we just read from active-disk, otherwise we read from temp.img - writes to temp.img are not blocked by fleecing reads - still, guest writes of-course are blocked by in-flight fleecing reads, that currently read from active-disk - it's the minimum necessary blocking 4. Temporary image may be of any format, as we don't rely on backing feature. 5. Permission relation are simplified. With old scheme we have to share write permission on target child of copy-before-write, otherwise backing link conflicts with copy-before-write file child write permissions. With new scheme we don't have backing link, and copy-before-write node may have unshared access to temporary node. (Not realized in this commit, will be in future). 6. Having control on fleecing reads we'll be able to implement alternative behavior on failed copy-before-write operations. Currently we just break guest request (that's a historical behavior of backup). But in some scenarios it's a bad behavior: better is to drop the backup as failed but don't break guest request. With new scheme we can simply unset some bits in a bitmap on CBW failure and further fleecing reads will -EACCES, or something like this. (Not implemented in this commit, will be in future) Additional application for this is implementing timeout for CBW operations. Iotest 257 output is updated, as two more bitmaps now live in copy-before-write filter. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20220303194349.2304213-13-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-03-03 22:43:45 +03:00
int64_t cluster_size;
g_autoptr(BlockdevOptions) full_opts = NULL;
BlockdevOptionsCbw *opts;
int ret;
full_opts = cbw_parse_options(options, errp);
if (!full_opts) {
return -EINVAL;
}
assert(full_opts->driver == BLOCKDEV_DRIVER_COPY_BEFORE_WRITE);
opts = &full_opts->u.copy_before_write;
ret = bdrv_open_file_child(NULL, options, "file", bs, errp);
if (ret < 0) {
return ret;
}
s->target = bdrv_open_child(NULL, options, "target", bs, &child_of_bds,
BDRV_CHILD_DATA, false, errp);
if (!s->target) {
return -EINVAL;
}
if (opts->bitmap) {
bitmap = block_dirty_bitmap_lookup(opts->bitmap->node,
opts->bitmap->name, NULL, errp);
if (!bitmap) {
return -EINVAL;
}
}
s->on_cbw_error = opts->has_on_cbw_error ? opts->on_cbw_error :
ON_CBW_ERROR_BREAK_GUEST_WRITE;
s->cbw_timeout_ns = opts->has_cbw_timeout ?
opts->cbw_timeout * NANOSECONDS_PER_SECOND : 0;
bs->total_sectors = bs->file->bs->total_sectors;
bs->supported_write_flags = BDRV_REQ_WRITE_UNCHANGED |
(BDRV_REQ_FUA & bs->file->bs->supported_write_flags);
bs->supported_zero_flags = BDRV_REQ_WRITE_UNCHANGED |
((BDRV_REQ_FUA | BDRV_REQ_MAY_UNMAP | BDRV_REQ_NO_FALLBACK) &
bs->file->bs->supported_zero_flags);
s->bcs = block_copy_state_new(bs->file, s->target, bitmap, errp);
if (!s->bcs) {
error_prepend(errp, "Cannot create block-copy-state: ");
return -EINVAL;
}
block: copy-before-write: realize snapshot-access API Current scheme of image fleecing looks like this: [guest] [NBD export] | | |root | root v v [copy-before-write] -----> [temp.qcow2] | target | |file |backing v | [active disk] <-------------+ - On guest writes copy-before-write filter copies old data from active disk to temp.qcow2. So fleecing client (NBD export) when reads changed regions from temp.qcow2 image and unchanged from active disk through backing link. This patch makes possible new image fleecing scheme: [guest] [NBD export] | | | root | root v file v [copy-before-write]<------[snapshot-access] | | | file | target v v [active-disk] [temp.img] - copy-before-write does CBW operations and also provides snapshot-access API. The API may be accessed through snapshot-access driver. Benefits of new scheme: 1. Access control: if remote client try to read data that not covered by original dirty bitmap used on copy-before-write open, client gets -EACCES. 2. Discard support: if remote client do DISCARD, this additionally to discarding data in temp.img informs block-copy process to not copy these clusters. Next read from discarded area will return -EACCES. This is significant thing: when fleecing user reads data that was not yet copied to temp.img, we can avoid copying it on further guest write. 3. Synchronisation between client reads and block-copy write is more efficient. In old scheme we just rely on BDRV_REQ_SERIALISING flag used for writes to temp.qcow2. New scheme is less blocking: - fleecing reads are never blocked: if data region is untouched or in-flight, we just read from active-disk, otherwise we read from temp.img - writes to temp.img are not blocked by fleecing reads - still, guest writes of-course are blocked by in-flight fleecing reads, that currently read from active-disk - it's the minimum necessary blocking 4. Temporary image may be of any format, as we don't rely on backing feature. 5. Permission relation are simplified. With old scheme we have to share write permission on target child of copy-before-write, otherwise backing link conflicts with copy-before-write file child write permissions. With new scheme we don't have backing link, and copy-before-write node may have unshared access to temporary node. (Not realized in this commit, will be in future). 6. Having control on fleecing reads we'll be able to implement alternative behavior on failed copy-before-write operations. Currently we just break guest request (that's a historical behavior of backup). But in some scenarios it's a bad behavior: better is to drop the backup as failed but don't break guest request. With new scheme we can simply unset some bits in a bitmap on CBW failure and further fleecing reads will -EACCES, or something like this. (Not implemented in this commit, will be in future) Additional application for this is implementing timeout for CBW operations. Iotest 257 output is updated, as two more bitmaps now live in copy-before-write filter. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20220303194349.2304213-13-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-03-03 22:43:45 +03:00
cluster_size = block_copy_cluster_size(s->bcs);
s->done_bitmap = bdrv_create_dirty_bitmap(bs, cluster_size, NULL, errp);
if (!s->done_bitmap) {
return -EINVAL;
}
bdrv_disable_dirty_bitmap(s->done_bitmap);
/* s->access_bitmap starts equal to bcs bitmap */
s->access_bitmap = bdrv_create_dirty_bitmap(bs, cluster_size, NULL, errp);
if (!s->access_bitmap) {
return -EINVAL;
}
bdrv_disable_dirty_bitmap(s->access_bitmap);
bdrv_dirty_bitmap_merge_internal(s->access_bitmap,
block_copy_dirty_bitmap(s->bcs), NULL,
true);
qemu_co_mutex_init(&s->lock);
QLIST_INIT(&s->frozen_read_reqs);
return 0;
}
static void cbw_close(BlockDriverState *bs)
{
BDRVCopyBeforeWriteState *s = bs->opaque;
block: copy-before-write: realize snapshot-access API Current scheme of image fleecing looks like this: [guest] [NBD export] | | |root | root v v [copy-before-write] -----> [temp.qcow2] | target | |file |backing v | [active disk] <-------------+ - On guest writes copy-before-write filter copies old data from active disk to temp.qcow2. So fleecing client (NBD export) when reads changed regions from temp.qcow2 image and unchanged from active disk through backing link. This patch makes possible new image fleecing scheme: [guest] [NBD export] | | | root | root v file v [copy-before-write]<------[snapshot-access] | | | file | target v v [active-disk] [temp.img] - copy-before-write does CBW operations and also provides snapshot-access API. The API may be accessed through snapshot-access driver. Benefits of new scheme: 1. Access control: if remote client try to read data that not covered by original dirty bitmap used on copy-before-write open, client gets -EACCES. 2. Discard support: if remote client do DISCARD, this additionally to discarding data in temp.img informs block-copy process to not copy these clusters. Next read from discarded area will return -EACCES. This is significant thing: when fleecing user reads data that was not yet copied to temp.img, we can avoid copying it on further guest write. 3. Synchronisation between client reads and block-copy write is more efficient. In old scheme we just rely on BDRV_REQ_SERIALISING flag used for writes to temp.qcow2. New scheme is less blocking: - fleecing reads are never blocked: if data region is untouched or in-flight, we just read from active-disk, otherwise we read from temp.img - writes to temp.img are not blocked by fleecing reads - still, guest writes of-course are blocked by in-flight fleecing reads, that currently read from active-disk - it's the minimum necessary blocking 4. Temporary image may be of any format, as we don't rely on backing feature. 5. Permission relation are simplified. With old scheme we have to share write permission on target child of copy-before-write, otherwise backing link conflicts with copy-before-write file child write permissions. With new scheme we don't have backing link, and copy-before-write node may have unshared access to temporary node. (Not realized in this commit, will be in future). 6. Having control on fleecing reads we'll be able to implement alternative behavior on failed copy-before-write operations. Currently we just break guest request (that's a historical behavior of backup). But in some scenarios it's a bad behavior: better is to drop the backup as failed but don't break guest request. With new scheme we can simply unset some bits in a bitmap on CBW failure and further fleecing reads will -EACCES, or something like this. (Not implemented in this commit, will be in future) Additional application for this is implementing timeout for CBW operations. Iotest 257 output is updated, as two more bitmaps now live in copy-before-write filter. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20220303194349.2304213-13-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-03-03 22:43:45 +03:00
bdrv_release_dirty_bitmap(s->access_bitmap);
bdrv_release_dirty_bitmap(s->done_bitmap);
block_copy_state_free(s->bcs);
s->bcs = NULL;
}
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 11:38:27 +03:00
BlockDriver bdrv_cbw_filter = {
.format_name = "copy-before-write",
.instance_size = sizeof(BDRVCopyBeforeWriteState),
.bdrv_open = cbw_open,
.bdrv_close = cbw_close,
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 11:38:27 +03:00
.bdrv_co_preadv = cbw_co_preadv,
.bdrv_co_pwritev = cbw_co_pwritev,
.bdrv_co_pwrite_zeroes = cbw_co_pwrite_zeroes,
.bdrv_co_pdiscard = cbw_co_pdiscard,
.bdrv_co_flush = cbw_co_flush,
block: copy-before-write: realize snapshot-access API Current scheme of image fleecing looks like this: [guest] [NBD export] | | |root | root v v [copy-before-write] -----> [temp.qcow2] | target | |file |backing v | [active disk] <-------------+ - On guest writes copy-before-write filter copies old data from active disk to temp.qcow2. So fleecing client (NBD export) when reads changed regions from temp.qcow2 image and unchanged from active disk through backing link. This patch makes possible new image fleecing scheme: [guest] [NBD export] | | | root | root v file v [copy-before-write]<------[snapshot-access] | | | file | target v v [active-disk] [temp.img] - copy-before-write does CBW operations and also provides snapshot-access API. The API may be accessed through snapshot-access driver. Benefits of new scheme: 1. Access control: if remote client try to read data that not covered by original dirty bitmap used on copy-before-write open, client gets -EACCES. 2. Discard support: if remote client do DISCARD, this additionally to discarding data in temp.img informs block-copy process to not copy these clusters. Next read from discarded area will return -EACCES. This is significant thing: when fleecing user reads data that was not yet copied to temp.img, we can avoid copying it on further guest write. 3. Synchronisation between client reads and block-copy write is more efficient. In old scheme we just rely on BDRV_REQ_SERIALISING flag used for writes to temp.qcow2. New scheme is less blocking: - fleecing reads are never blocked: if data region is untouched or in-flight, we just read from active-disk, otherwise we read from temp.img - writes to temp.img are not blocked by fleecing reads - still, guest writes of-course are blocked by in-flight fleecing reads, that currently read from active-disk - it's the minimum necessary blocking 4. Temporary image may be of any format, as we don't rely on backing feature. 5. Permission relation are simplified. With old scheme we have to share write permission on target child of copy-before-write, otherwise backing link conflicts with copy-before-write file child write permissions. With new scheme we don't have backing link, and copy-before-write node may have unshared access to temporary node. (Not realized in this commit, will be in future). 6. Having control on fleecing reads we'll be able to implement alternative behavior on failed copy-before-write operations. Currently we just break guest request (that's a historical behavior of backup). But in some scenarios it's a bad behavior: better is to drop the backup as failed but don't break guest request. With new scheme we can simply unset some bits in a bitmap on CBW failure and further fleecing reads will -EACCES, or something like this. (Not implemented in this commit, will be in future) Additional application for this is implementing timeout for CBW operations. Iotest 257 output is updated, as two more bitmaps now live in copy-before-write filter. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20220303194349.2304213-13-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-03-03 22:43:45 +03:00
.bdrv_co_preadv_snapshot = cbw_co_preadv_snapshot,
.bdrv_co_pdiscard_snapshot = cbw_co_pdiscard_snapshot,
.bdrv_co_snapshot_block_status = cbw_co_snapshot_block_status,
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 11:38:27 +03:00
.bdrv_refresh_filename = cbw_refresh_filename,
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 11:38:27 +03:00
.bdrv_child_perm = cbw_child_perm,
.is_filter = true,
};
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 11:38:27 +03:00
BlockDriverState *bdrv_cbw_append(BlockDriverState *source,
BlockDriverState *target,
const char *filter_node_name,
BlockCopyState **bcs,
Error **errp)
{
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 11:38:27 +03:00
BDRVCopyBeforeWriteState *state;
BlockDriverState *top;
QDict *opts;
assert(source->total_sectors == target->total_sectors);
GLOBAL_STATE_CODE();
opts = qdict_new();
qdict_put_str(opts, "driver", "copy-before-write");
if (filter_node_name) {
qdict_put_str(opts, "node-name", filter_node_name);
}
qdict_put_str(opts, "file", bdrv_get_node_name(source));
qdict_put_str(opts, "target", bdrv_get_node_name(target));
top = bdrv_insert_node(source, opts, BDRV_O_RDWR, errp);
if (!top) {
return NULL;
}
state = top->opaque;
*bcs = state->bcs;
return top;
}
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 11:38:27 +03:00
void bdrv_cbw_drop(BlockDriverState *bs)
{
GLOBAL_STATE_CODE();
bdrv_drop_filter(bs, &error_abort);
bdrv_unref(bs);
}
static void cbw_init(void)
{
bdrv_register(&bdrv_cbw_filter);
}
block_init(cbw_init);