2019-03-14 21:09:25 +03:00
|
|
|
# See docs/devel/tracing.txt for syntax documentation.
|
|
|
|
|
|
2019-03-14 21:09:26 +03:00
|
|
|
# client.c
|
2017-07-07 23:30:43 +03:00
|
|
|
nbd_send_option_request(uint32_t opt, const char *name, uint32_t len) "Sending option request %" PRIu32" (%s), len %" PRIu32
|
2018-02-15 16:51:43 +03:00
|
|
|
nbd_receive_option_reply(uint32_t option, const char *optname, uint32_t type, const char *typename, uint32_t length) "Received option reply %" PRIu32" (%s), type %" PRIu32" (%s), len %" PRIu32
|
2018-12-19 01:57:13 +03:00
|
|
|
nbd_server_error_msg(uint32_t err, const char *type, const char *msg) "server reported error 0x%" PRIx32 " (%s) with additional message: %s"
|
2018-02-15 16:51:43 +03:00
|
|
|
nbd_reply_err_unsup(uint32_t option, const char *name) "server doesn't understand request %" PRIu32 " (%s), attempting fallback"
|
nbd/client: Refactor nbd_receive_list()
Right now, nbd_receive_list() is only called by
nbd_receive_query_exports(), which in turn is only called if the
server lacks NBD_OPT_GO but has working option negotiation, and is
merely used as a quality-of-implementation trick since servers
can't give decent errors for NBD_OPT_EXPORT_NAME. However, servers
that lack NBD_OPT_GO are becoming increasingly rare (nbdkit was a
latecomer, in Aug 2018, but qemu has been such a server since commit
f37708f6 in July 2017 and released in 2.10), so it no longer makes
sense to micro-optimize that function for performance.
Furthermore, when debugging a server's implementation, tracing the
full reply (both names and descriptions) is useful, not to mention
that upcoming patches adding 'qemu-nbd --list' will want to collect
that data. And when you consider that a server can send an export
name up to the NBD protocol length limit of 4k; but our current
NBD_MAX_NAME_SIZE is only 256, we can't trace all valid server
names without more storage, but 4k is large enough that the heap
is better than the stack for long names.
Thus, I'm changing the division of labor, with nbd_receive_list()
now always malloc'ing a result on success (the malloc is bounded
by the fact that we reject servers with a reply length larger
than 32M), and moving the comparison to 'wantname' to the caller.
There is a minor change in behavior where a server with 0 exports
(an immediate NBD_REP_ACK reply) is now no longer distinguished
from a server without LIST support (NBD_REP_ERR_UNSUP); this
information could be preserved with a complication to the calling
contract to provide a bit more information, but I didn't see the
point. After all, the worst that can happen if our guess at a
match is wrong is that the caller will get a cryptic disconnect
when NBD_OPT_EXPORT_NAME fails (which is no different from what
would happen if we had not tried LIST), while treating an empty
list as immediate failure would prevent connecting to really old
servers that really did lack LIST. Besides, NBD servers with 0
exports are rare (qemu can do it when using QMP nbd-server-start
without nbd-server-add - but qemu understands NBD_OPT_GO and
thus won't tickle this change in behavior).
Fix the spelling of foundExport to match coding standards while
in the area.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20190117193658.16413-9-eblake@redhat.com>
2019-01-17 22:36:45 +03:00
|
|
|
nbd_receive_list(const char *name, const char *desc) "export list includes '%s', description '%s'"
|
2019-01-17 22:36:53 +03:00
|
|
|
nbd_opt_info_go_start(const char *opt, const char *name) "Attempting %s for export '%s'"
|
|
|
|
|
nbd_opt_info_go_success(const char *opt) "Export is ready after %s request"
|
|
|
|
|
nbd_opt_info_unknown(int info, const char *name) "Ignoring unknown info %d (%s)"
|
|
|
|
|
nbd_opt_info_block_size(uint32_t minimum, uint32_t preferred, uint32_t maximum) "Block sizes are 0x%" PRIx32 ", 0x%" PRIx32 ", 0x%" PRIx32
|
2017-07-07 18:29:18 +03:00
|
|
|
nbd_receive_query_exports_start(const char *wantname) "Querying export list for '%s'"
|
|
|
|
|
nbd_receive_query_exports_success(const char *wantname) "Found desired export name '%s'"
|
2017-10-27 13:40:34 +03:00
|
|
|
nbd_receive_starttls_new_client(void) "Setting up TLS"
|
2017-07-07 18:29:18 +03:00
|
|
|
nbd_receive_starttls_tls_handshake(void) "Starting TLS handshake"
|
2019-01-17 22:36:48 +03:00
|
|
|
nbd_opt_meta_request(const char *optname, const char *context, const char *export) "Requesting %s %s for export %s"
|
2019-01-17 22:36:49 +03:00
|
|
|
nbd_opt_meta_reply(const char *optname, const char *context, uint32_t id) "Received %s mapping of %s to id %" PRIu32
|
2019-01-17 22:36:51 +03:00
|
|
|
nbd_start_negotiate(void *tlscreds, const char *hostname) "Receiving negotiation tlscreds=%p hostname=%s"
|
2017-07-07 18:29:18 +03:00
|
|
|
nbd_receive_negotiate_magic(uint64_t magic) "Magic is 0x%" PRIx64
|
trace-events: fix code style: print 0x before hex numbers
The only exception are groups of numers separated by symbols
'.', ' ', ':', '/', like 'ab.09.7d'.
This patch is made by the following:
> find . -name trace-events | xargs python script.py
where script.py is the following python script:
=========================
#!/usr/bin/env python
import sys
import re
import fileinput
rhex = '%[-+ *.0-9]*(?:[hljztL]|ll|hh)?(?:x|X|"\s*PRI[xX][^"]*"?)'
rgroup = re.compile('((?:' + rhex + '[.:/ ])+' + rhex + ')')
rbad = re.compile('(?<!0x)' + rhex)
files = sys.argv[1:]
for fname in files:
for line in fileinput.input(fname, inplace=True):
arr = re.split(rgroup, line)
for i in range(0, len(arr), 2):
arr[i] = re.sub(rbad, '0x\g<0>', arr[i])
sys.stdout.write(''.join(arr))
=========================
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-id: 20170731160135.12101-5-vsementsov@virtuozzo.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-07-31 19:01:35 +03:00
|
|
|
nbd_receive_negotiate_server_flags(uint32_t globalflags) "Global flags are 0x%" PRIx32
|
2019-01-17 22:36:46 +03:00
|
|
|
nbd_receive_negotiate_name(const char *name) "Requesting NBD export name '%s'"
|
trace-events: fix code style: print 0x before hex numbers
The only exception are groups of numers separated by symbols
'.', ' ', ':', '/', like 'ab.09.7d'.
This patch is made by the following:
> find . -name trace-events | xargs python script.py
where script.py is the following python script:
=========================
#!/usr/bin/env python
import sys
import re
import fileinput
rhex = '%[-+ *.0-9]*(?:[hljztL]|ll|hh)?(?:x|X|"\s*PRI[xX][^"]*"?)'
rgroup = re.compile('((?:' + rhex + '[.:/ ])+' + rhex + ')')
rbad = re.compile('(?<!0x)' + rhex)
files = sys.argv[1:]
for fname in files:
for line in fileinput.input(fname, inplace=True):
arr = re.split(rgroup, line)
for i in range(0, len(arr), 2):
arr[i] = re.sub(rbad, '0x\g<0>', arr[i])
sys.stdout.write(''.join(arr))
=========================
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-id: 20170731160135.12101-5-vsementsov@virtuozzo.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-07-31 19:01:35 +03:00
|
|
|
nbd_receive_negotiate_size_flags(uint64_t size, uint16_t flags) "Size is %" PRIu64 ", export flags 0x%" PRIx16
|
2017-07-07 18:29:18 +03:00
|
|
|
nbd_init_set_socket(void) "Setting NBD socket"
|
|
|
|
|
nbd_init_set_block_size(unsigned long block_size) "Setting block size to %lu"
|
|
|
|
|
nbd_init_set_size(unsigned long sectors) "Setting size to %lu block(s)"
|
|
|
|
|
nbd_init_trailing_bytes(int ignored_bytes) "Ignoring trailing %d bytes of export"
|
|
|
|
|
nbd_init_set_readonly(void) "Setting readonly attribute"
|
|
|
|
|
nbd_init_finish(void) "Negotiation ended"
|
|
|
|
|
nbd_client_loop(void) "Doing NBD loop"
|
|
|
|
|
nbd_client_loop_ret(int ret, const char *error) "NBD loop returned %d: %s"
|
|
|
|
|
nbd_client_clear_queue(void) "Clearing NBD queue"
|
|
|
|
|
nbd_client_clear_socket(void) "Clearing NBD socket"
|
trace-events: fix code style: print 0x before hex numbers
The only exception are groups of numers separated by symbols
'.', ' ', ':', '/', like 'ab.09.7d'.
This patch is made by the following:
> find . -name trace-events | xargs python script.py
where script.py is the following python script:
=========================
#!/usr/bin/env python
import sys
import re
import fileinput
rhex = '%[-+ *.0-9]*(?:[hljztL]|ll|hh)?(?:x|X|"\s*PRI[xX][^"]*"?)'
rgroup = re.compile('((?:' + rhex + '[.:/ ])+' + rhex + ')')
rbad = re.compile('(?<!0x)' + rhex)
files = sys.argv[1:]
for fname in files:
for line in fileinput.input(fname, inplace=True):
arr = re.split(rgroup, line)
for i in range(0, len(arr), 2):
arr[i] = re.sub(rbad, '0x\g<0>', arr[i])
sys.stdout.write(''.join(arr))
=========================
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-id: 20170731160135.12101-5-vsementsov@virtuozzo.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-07-31 19:01:35 +03:00
|
|
|
nbd_send_request(uint64_t from, uint32_t len, uint64_t handle, uint16_t flags, uint16_t type, const char *name) "Sending request to server: { .from = %" PRIu64", .len = %" PRIu32 ", .handle = %" PRIu64 ", .flags = 0x%" PRIx16 ", .type = %" PRIu16 " (%s) }"
|
2017-10-27 13:40:35 +03:00
|
|
|
nbd_receive_simple_reply(int32_t error, const char *errname, uint64_t handle) "Got simple reply: { .error = %" PRId32 " (%s), handle = %" PRIu64" }"
|
2017-11-09 00:56:59 +03:00
|
|
|
nbd_receive_structured_reply_chunk(uint16_t flags, uint16_t type, const char *name, uint64_t handle, uint32_t length) "Got structured reply chunk: { flags = 0x%" PRIx16 ", type = %d (%s), handle = %" PRIu64 ", length = %" PRIu32 " }"
|
2017-07-07 18:29:18 +03:00
|
|
|
|
2019-03-14 21:09:26 +03:00
|
|
|
# common.c
|
2017-10-27 13:40:27 +03:00
|
|
|
nbd_unknown_error(int err) "Squashing unexpected error %d to EINVAL"
|
|
|
|
|
|
2019-03-14 21:09:26 +03:00
|
|
|
# server.c
|
2018-02-15 16:51:43 +03:00
|
|
|
nbd_negotiate_send_rep_len(uint32_t opt, const char *optname, uint32_t type, const char *typename, uint32_t len) "Reply opt=%" PRIu32 " (%s), type=%" PRIu32 " (%s), len=%" PRIu32
|
2017-07-07 18:29:18 +03:00
|
|
|
nbd_negotiate_send_rep_err(const char *msg) "sending error message \"%s\""
|
|
|
|
|
nbd_negotiate_send_rep_list(const char *name, const char *desc) "Advertising export name '%s' description '%s'"
|
|
|
|
|
nbd_negotiate_handle_export_name(void) "Checking length"
|
|
|
|
|
nbd_negotiate_handle_export_name_request(const char *name) "Client requested export '%s'"
|
2017-07-07 23:30:46 +03:00
|
|
|
nbd_negotiate_send_info(int info, const char *name, uint32_t length) "Sending NBD_REP_INFO type %d (%s) with remaining length %" PRIu32
|
|
|
|
|
nbd_negotiate_handle_info_requests(int requests) "Client requested %d items of info"
|
|
|
|
|
nbd_negotiate_handle_info_request(int request, const char *name) "Client requested info %d (%s)"
|
nbd: Implement NBD_INFO_BLOCK_SIZE on server
The upstream NBD Protocol has defined a new extension to allow
the server to advertise block sizes to the client, as well as
a way for the client to inform the server that it intends to
obey block sizes.
Thanks to a recent fix (commit df7b97ff), our real minimum
transfer size is always 1 (the block layer takes care of
read-modify-write on our behalf), but we're still more efficient
if we advertise 512 when the client supports it, as follows:
- OPT_INFO, but no NBD_INFO_BLOCK_SIZE: advertise 512, then
fail with NBD_REP_ERR_BLOCK_SIZE_REQD; client is free to try
something else since we don't disconnect
- OPT_INFO with NBD_INFO_BLOCK_SIZE: advertise 512
- OPT_GO, but no NBD_INFO_BLOCK_SIZE: advertise 1
- OPT_GO with NBD_INFO_BLOCK_SIZE: advertise 512
We can also advertise the optimum block size (presumably the
cluster size, when exporting a qcow2 file), and our absolute
maximum transfer size of 32M, to help newer clients avoid
EINVAL failures or abrupt disconnects on oversize requests.
We do not reject clients for using the older NBD_OPT_EXPORT_NAME;
we are no worse off for those clients than we used to be.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170707203049.534-9-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-07 23:30:48 +03:00
|
|
|
nbd_negotiate_handle_info_block_size(uint32_t minimum, uint32_t preferred, uint32_t maximum) "advertising minimum 0x%" PRIx32 ", preferred 0x%" PRIx32 ", maximum 0x%" PRIx32
|
2017-07-07 18:29:18 +03:00
|
|
|
nbd_negotiate_handle_starttls(void) "Setting up TLS"
|
|
|
|
|
nbd_negotiate_handle_starttls_handshake(void) "Starting TLS handshake"
|
2018-03-30 16:09:50 +03:00
|
|
|
nbd_negotiate_meta_context(const char *optname, const char *export, uint32_t queries) "Client requested %s for export %s, with %" PRIu32 " queries"
|
|
|
|
|
nbd_negotiate_meta_query_skip(const char *reason) "Skipping meta query: %s"
|
|
|
|
|
nbd_negotiate_meta_query_parse(const char *query) "Parsed meta query '%s'"
|
|
|
|
|
nbd_negotiate_meta_query_reply(const char *context, uint32_t id) "Replying with meta context '%s' id %" PRIu32
|
2017-07-07 23:30:44 +03:00
|
|
|
nbd_negotiate_options_flags(uint32_t flags) "Received client flags 0x%" PRIx32
|
2017-07-07 18:29:18 +03:00
|
|
|
nbd_negotiate_options_check_magic(uint64_t magic) "Checking opts magic 0x%" PRIx64
|
2018-02-15 16:51:43 +03:00
|
|
|
nbd_negotiate_options_check_option(uint32_t option, const char *name) "Checking option %" PRIu32 " (%s)"
|
2017-07-07 18:29:18 +03:00
|
|
|
nbd_negotiate_begin(void) "Beginning negotiation"
|
trace-events: fix code style: print 0x before hex numbers
The only exception are groups of numers separated by symbols
'.', ' ', ':', '/', like 'ab.09.7d'.
This patch is made by the following:
> find . -name trace-events | xargs python script.py
where script.py is the following python script:
=========================
#!/usr/bin/env python
import sys
import re
import fileinput
rhex = '%[-+ *.0-9]*(?:[hljztL]|ll|hh)?(?:x|X|"\s*PRI[xX][^"]*"?)'
rgroup = re.compile('((?:' + rhex + '[.:/ ])+' + rhex + ')')
rbad = re.compile('(?<!0x)' + rhex)
files = sys.argv[1:]
for fname in files:
for line in fileinput.input(fname, inplace=True):
arr = re.split(rgroup, line)
for i in range(0, len(arr), 2):
arr[i] = re.sub(rbad, '0x\g<0>', arr[i])
sys.stdout.write(''.join(arr))
=========================
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-id: 20170731160135.12101-5-vsementsov@virtuozzo.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-07-31 19:01:35 +03:00
|
|
|
nbd_negotiate_new_style_size_flags(uint64_t size, unsigned flags) "advertising size %" PRIu64 " and flags 0x%x"
|
2017-07-07 18:29:18 +03:00
|
|
|
nbd_negotiate_success(void) "Negotiation succeeded"
|
trace-events: fix code style: print 0x before hex numbers
The only exception are groups of numers separated by symbols
'.', ' ', ':', '/', like 'ab.09.7d'.
This patch is made by the following:
> find . -name trace-events | xargs python script.py
where script.py is the following python script:
=========================
#!/usr/bin/env python
import sys
import re
import fileinput
rhex = '%[-+ *.0-9]*(?:[hljztL]|ll|hh)?(?:x|X|"\s*PRI[xX][^"]*"?)'
rgroup = re.compile('((?:' + rhex + '[.:/ ])+' + rhex + ')')
rbad = re.compile('(?<!0x)' + rhex)
files = sys.argv[1:]
for fname in files:
for line in fileinput.input(fname, inplace=True):
arr = re.split(rgroup, line)
for i in range(0, len(arr), 2):
arr[i] = re.sub(rbad, '0x\g<0>', arr[i])
sys.stdout.write(''.join(arr))
=========================
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-id: 20170731160135.12101-5-vsementsov@virtuozzo.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-07-31 19:01:35 +03:00
|
|
|
nbd_receive_request(uint32_t magic, uint16_t flags, uint16_t type, uint64_t from, uint32_t len) "Got request: { magic = 0x%" PRIx32 ", .flags = 0x%" PRIx16 ", .type = 0x%" PRIx16 ", from = %" PRIu64 ", len = %" PRIu32 " }"
|
2017-07-07 18:29:18 +03:00
|
|
|
nbd_blk_aio_attached(const char *name, void *ctx) "Export %s: Attaching clients to AIO context %p\n"
|
|
|
|
|
nbd_blk_aio_detach(const char *name, void *ctx) "Export %s: Detaching clients from AIO context %p\n"
|
2017-10-27 13:40:26 +03:00
|
|
|
nbd_co_send_simple_reply(uint64_t handle, uint32_t error, const char *errname, int len) "Send simple reply: handle = %" PRIu64 ", error = %" PRIu32 " (%s), len = %d"
|
2017-11-09 00:57:03 +03:00
|
|
|
nbd_co_send_structured_done(uint64_t handle) "Send structured reply done: handle = %" PRIu64
|
2017-10-27 13:40:32 +03:00
|
|
|
nbd_co_send_structured_read(uint64_t handle, uint64_t offset, void *data, size_t size) "Send structured read data reply: handle = %" PRIu64 ", offset = %" PRIu64 ", data = %p, len = %zu"
|
nbd/server: Implement sparse reads atop structured reply
The reason that NBD added structured reply in the first place was
to allow for efficient reads of sparse files, by allowing the
reply to include chunks to quickly communicate holes to the client
without sending lots of zeroes over the wire. Time to implement
this in the server; our client can already read such data.
We can only skip holes insofar as the block layer can query them;
and only if the client is okay with a fragmented request (if a
client requests NBD_CMD_FLAG_DF and the entire read is a hole, we
could technically return a single NBD_REPLY_TYPE_OFFSET_HOLE, but
that's a fringe case not worth catering to here). Sadly, the
control flow is a bit wonkier than I would have preferred, but
it was minimally invasive to have a split in the action between
a fragmented read (handled directly where we recognize
NBD_CMD_READ with the right conditions, and sending multiple
chunks) vs. a single read (handled at the end of nbd_trip, for
both simple and structured replies, when we know there is only
one thing being read). Likewise, I didn't make any effort to
optimize the final chunk of a fragmented read to set the
NBD_REPLY_FLAG_DONE, but unconditionally send that as a separate
NBD_REPLY_TYPE_NONE.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171107030912.23930-2-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2017-11-07 06:09:11 +03:00
|
|
|
nbd_co_send_structured_read_hole(uint64_t handle, uint64_t offset, size_t size) "Send structured read hole reply: handle = %" PRIu64 ", offset = %" PRIu64 ", len = %zu"
|
2018-06-09 18:17:56 +03:00
|
|
|
nbd_co_send_extents(uint64_t handle, unsigned int extents, uint32_t id, uint64_t length, int last) "Send block status reply: handle = %" PRIu64 ", extents = %u, context = %d (extents cover %" PRIu64 " bytes, last chunk = %d)"
|
2017-10-27 13:40:33 +03:00
|
|
|
nbd_co_send_structured_error(uint64_t handle, int err, const char *errname, const char *msg) "Send structured error reply: handle = %" PRIu64 ", error = %d (%s), msg = '%s'"
|
2017-07-07 23:30:43 +03:00
|
|
|
nbd_co_receive_request_decode_type(uint64_t handle, uint16_t type, const char *name) "Decoding type: handle = %" PRIu64 ", type = %" PRIu16 " (%s)"
|
2017-07-07 18:29:18 +03:00
|
|
|
nbd_co_receive_request_payload_received(uint64_t handle, uint32_t len) "Payload received: handle = %" PRIu64 ", len = %" PRIu32
|
nbd/server: Trace client noncompliance on unaligned requests
We've recently added traces for clients to flag server non-compliance;
let's do the same for servers to flag client non-compliance. According
to the spec, if the client requests NBD_INFO_BLOCK_SIZE, it is
promising to send all requests aligned to those boundaries. Of
course, if the client does not request NBD_INFO_BLOCK_SIZE, then it
made no promises so we shouldn't flag anything; and because we are
willing to handle clients that made no promises (the spec allows us to
use NBD_REP_ERR_BLOCK_SIZE_REQD if we had been unwilling), we already
have to handle unaligned requests (which the block layer already does
on our behalf). So even though the spec allows us to return EINVAL
for clients that promised to behave, it's easier to always answer
unaligned requests. Still, flagging non-compliance can be useful in
debugging a client that is trying to be maximally portable.
Qemu as client used to have one spot where it sent non-compliant
requests: if the server sends an unaligned reply to
NBD_CMD_BLOCK_STATUS, and the client was iterating over the entire
disk, the next request would start at that unaligned point; this was
fixed in commit a39286dd when the client was taught to work around
server non-compliance; but is equally fixed if the server is patched
to not send unaligned replies in the first place (yes, qemu 4.0 as
server still has few such bugs, although they will be patched in
4.1). Fortunately, I did not find any more spots where qemu as client
was non-compliant. I was able to test the patch by using the following
hack to convince qemu-io to run various unaligned commands, coupled
with serving 512-byte alignment by intentionally omitting '-f raw' on
the server while viewing server traces.
| diff --git i/nbd/client.c w/nbd/client.c
| index 427980bdd22..1858b2aac35 100644
| --- i/nbd/client.c
| +++ w/nbd/client.c
| @@ -449,6 +449,7 @@ static int nbd_opt_info_or_go(QIOChannel *ioc, uint32_t opt,
| nbd_send_opt_abort(ioc);
| return -1;
| }
| + info->min_block = 1;//hack
| if (!is_power_of_2(info->min_block)) {
| error_setg(errp, "server minimum block size %" PRIu32
| " is not a power of two", info->min_block);
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190403030526.12258-3-eblake@redhat.com>
[eblake: address minor review nits]
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2019-04-03 06:05:21 +03:00
|
|
|
nbd_co_receive_align_compliance(const char *op, uint64_t from, uint32_t len, uint32_t align) "client sent non-compliant unaligned %s request: from=0x%" PRIx64 ", len=0x%" PRIx32 ", align=0x%" PRIx32
|
2017-07-07 18:29:18 +03:00
|
|
|
nbd_trip(void) "Reading request"
|