block: qemu-iotests 085 - live snapshots tests
This adds tests for live snapshots, both through the single
snapshot command, and the transaction group snapshot command.
The snapshots are done through the QMP interface, using the
following commands for snapshots:
Single snapshot:
{ 'execute': 'blockdev-snapshot-sync', 'arguments':
{ 'device': 'virtio0', 'snapshot-file':'...',
'format': 'qcow2' } }"
Group snapshot:
{ 'execute': 'transaction', 'arguments':
{'actions': [
{ 'type': 'blockdev-snapshot-sync', 'data' :
{ 'device': 'virtio0', 'snapshot-file': '...' } },
{ 'type': 'blockdev-snapshot-sync', 'data' :
{ 'device': 'virtio1', 'snapshot-file': '...' } } ]
} }
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-03-01 06:08:11 +04:00
|
|
|
QA output created by 085
|
2019-11-07 19:37:02 +03:00
|
|
|
Formatting 'TEST_DIR/t.IMGFMT.1', fmt=IMGFMT size=134217728
|
|
|
|
|
Formatting 'TEST_DIR/t.IMGFMT.2', fmt=IMGFMT size=134217728
|
block: qemu-iotests 085 - live snapshots tests
This adds tests for live snapshots, both through the single
snapshot command, and the transaction group snapshot command.
The snapshots are done through the QMP interface, using the
following commands for snapshots:
Single snapshot:
{ 'execute': 'blockdev-snapshot-sync', 'arguments':
{ 'device': 'virtio0', 'snapshot-file':'...',
'format': 'qcow2' } }"
Group snapshot:
{ 'execute': 'transaction', 'arguments':
{'actions': [
{ 'type': 'blockdev-snapshot-sync', 'data' :
{ 'device': 'virtio0', 'snapshot-file': '...' } },
{ 'type': 'blockdev-snapshot-sync', 'data' :
{ 'device': 'virtio1', 'snapshot-file': '...' } } ]
} }
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-03-01 06:08:11 +04:00
|
|
|
|
|
|
|
|
=== Running QEMU ===
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
=== Sending capabilities ===
|
|
|
|
|
|
2019-11-15 00:34:14 +03:00
|
|
|
{ 'execute': 'qmp_capabilities' }
|
block: qemu-iotests 085 - live snapshots tests
This adds tests for live snapshots, both through the single
snapshot command, and the transaction group snapshot command.
The snapshots are done through the QMP interface, using the
following commands for snapshots:
Single snapshot:
{ 'execute': 'blockdev-snapshot-sync', 'arguments':
{ 'device': 'virtio0', 'snapshot-file':'...',
'format': 'qcow2' } }"
Group snapshot:
{ 'execute': 'transaction', 'arguments':
{'actions': [
{ 'type': 'blockdev-snapshot-sync', 'data' :
{ 'device': 'virtio0', 'snapshot-file': '...' } },
{ 'type': 'blockdev-snapshot-sync', 'data' :
{ 'device': 'virtio1', 'snapshot-file': '...' } } ]
} }
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-03-01 06:08:11 +04:00
|
|
|
{"return": {}}
|
|
|
|
|
|
|
|
|
|
=== Create a single snapshot on virtio0 ===
|
|
|
|
|
|
2019-11-15 00:34:14 +03:00
|
|
|
{ 'execute': 'blockdev-snapshot-sync', 'arguments': { 'device': 'virtio0', 'snapshot-file':'TEST_DIR/1-snapshot-v0.IMGFMT', 'format': 'IMGFMT' } }
|
qcow2: introduce compression type feature
The patch adds some preparation parts for incompatible compression type
feature to qcow2 allowing the use different compression methods for
image clusters (de)compressing.
It is implied that the compression type is set on the image creation and
can be changed only later by image conversion, thus compression type
defines the only compression algorithm used for the image, and thus,
for all image clusters.
The goal of the feature is to add support of other compression methods
to qcow2. For example, ZSTD which is more effective on compression than ZLIB.
The default compression is ZLIB. Images created with ZLIB compression type
are backward compatible with older qemu versions.
Adding of the compression type breaks a number of tests because now the
compression type is reported on image creation and there are some changes
in the qcow2 header in size and offsets.
The tests are fixed in the following ways:
* filter out compression_type for many tests
* fix header size, feature table size and backing file offset
affected tests: 031, 036, 061, 080
header_size +=8: 1 byte compression type
7 bytes padding
feature_table += 48: incompatible feature compression type
backing_file_offset += 56 (8 + 48 -> header_change + feature_table_change)
* add "compression type" for test output matching when it isn't filtered
affected tests: 049, 060, 061, 065, 082, 085, 144, 182, 185, 198, 206,
242, 255, 274, 280
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
QAPI part:
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200507082521.29210-2-dplotnikov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-05-07 11:25:18 +03:00
|
|
|
Formatting 'TEST_DIR/1-snapshot-v0.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/t.qcow2.1 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
|
block: qemu-iotests 085 - live snapshots tests
This adds tests for live snapshots, both through the single
snapshot command, and the transaction group snapshot command.
The snapshots are done through the QMP interface, using the
following commands for snapshots:
Single snapshot:
{ 'execute': 'blockdev-snapshot-sync', 'arguments':
{ 'device': 'virtio0', 'snapshot-file':'...',
'format': 'qcow2' } }"
Group snapshot:
{ 'execute': 'transaction', 'arguments':
{'actions': [
{ 'type': 'blockdev-snapshot-sync', 'data' :
{ 'device': 'virtio0', 'snapshot-file': '...' } },
{ 'type': 'blockdev-snapshot-sync', 'data' :
{ 'device': 'virtio1', 'snapshot-file': '...' } } ]
} }
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-03-01 06:08:11 +04:00
|
|
|
{"return": {}}
|
|
|
|
|
|
|
|
|
|
=== Invalid command - missing device and nodename ===
|
|
|
|
|
|
2019-11-15 00:34:14 +03:00
|
|
|
{ 'execute': 'blockdev-snapshot-sync', 'arguments': { 'snapshot-file':'TEST_DIR/1-snapshot-v0.IMGFMT', 'format': 'IMGFMT' } }
|
block: qemu-iotests 085 - live snapshots tests
This adds tests for live snapshots, both through the single
snapshot command, and the transaction group snapshot command.
The snapshots are done through the QMP interface, using the
following commands for snapshots:
Single snapshot:
{ 'execute': 'blockdev-snapshot-sync', 'arguments':
{ 'device': 'virtio0', 'snapshot-file':'...',
'format': 'qcow2' } }"
Group snapshot:
{ 'execute': 'transaction', 'arguments':
{'actions': [
{ 'type': 'blockdev-snapshot-sync', 'data' :
{ 'device': 'virtio0', 'snapshot-file': '...' } },
{ 'type': 'blockdev-snapshot-sync', 'data' :
{ 'device': 'virtio1', 'snapshot-file': '...' } } ]
} }
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-03-01 06:08:11 +04:00
|
|
|
{"error": {"class": "GenericError", "desc": "Cannot find device= nor node_name="}}
|
|
|
|
|
|
|
|
|
|
=== Invalid command - missing snapshot-file ===
|
|
|
|
|
|
2019-11-15 00:34:14 +03:00
|
|
|
{ 'execute': 'blockdev-snapshot-sync', 'arguments': { 'device': 'virtio0', 'format': 'IMGFMT' } }
|
block: qemu-iotests 085 - live snapshots tests
This adds tests for live snapshots, both through the single
snapshot command, and the transaction group snapshot command.
The snapshots are done through the QMP interface, using the
following commands for snapshots:
Single snapshot:
{ 'execute': 'blockdev-snapshot-sync', 'arguments':
{ 'device': 'virtio0', 'snapshot-file':'...',
'format': 'qcow2' } }"
Group snapshot:
{ 'execute': 'transaction', 'arguments':
{'actions': [
{ 'type': 'blockdev-snapshot-sync', 'data' :
{ 'device': 'virtio0', 'snapshot-file': '...' } },
{ 'type': 'blockdev-snapshot-sync', 'data' :
{ 'device': 'virtio1', 'snapshot-file': '...' } } ]
} }
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-03-01 06:08:11 +04:00
|
|
|
{"error": {"class": "GenericError", "desc": "Parameter 'snapshot-file' is missing"}}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
=== Create several transactional group snapshots ===
|
|
|
|
|
|
2019-11-15 00:34:14 +03:00
|
|
|
{ 'execute': 'transaction', 'arguments': {'actions': [ { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio0', 'snapshot-file': 'TEST_DIR/2-snapshot-v0.IMGFMT' } }, { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio1', 'snapshot-file': 'TEST_DIR/2-snapshot-v1.IMGFMT' } } ] } }
|
qcow2: introduce compression type feature
The patch adds some preparation parts for incompatible compression type
feature to qcow2 allowing the use different compression methods for
image clusters (de)compressing.
It is implied that the compression type is set on the image creation and
can be changed only later by image conversion, thus compression type
defines the only compression algorithm used for the image, and thus,
for all image clusters.
The goal of the feature is to add support of other compression methods
to qcow2. For example, ZSTD which is more effective on compression than ZLIB.
The default compression is ZLIB. Images created with ZLIB compression type
are backward compatible with older qemu versions.
Adding of the compression type breaks a number of tests because now the
compression type is reported on image creation and there are some changes
in the qcow2 header in size and offsets.
The tests are fixed in the following ways:
* filter out compression_type for many tests
* fix header size, feature table size and backing file offset
affected tests: 031, 036, 061, 080
header_size +=8: 1 byte compression type
7 bytes padding
feature_table += 48: incompatible feature compression type
backing_file_offset += 56 (8 + 48 -> header_change + feature_table_change)
* add "compression type" for test output matching when it isn't filtered
affected tests: 049, 060, 061, 065, 082, 085, 144, 182, 185, 198, 206,
242, 255, 274, 280
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
QAPI part:
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200507082521.29210-2-dplotnikov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-05-07 11:25:18 +03:00
|
|
|
Formatting 'TEST_DIR/2-snapshot-v0.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/1-snapshot-v0.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
|
|
|
|
|
Formatting 'TEST_DIR/2-snapshot-v1.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/t.qcow2.2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
|
block: qemu-iotests 085 - live snapshots tests
This adds tests for live snapshots, both through the single
snapshot command, and the transaction group snapshot command.
The snapshots are done through the QMP interface, using the
following commands for snapshots:
Single snapshot:
{ 'execute': 'blockdev-snapshot-sync', 'arguments':
{ 'device': 'virtio0', 'snapshot-file':'...',
'format': 'qcow2' } }"
Group snapshot:
{ 'execute': 'transaction', 'arguments':
{'actions': [
{ 'type': 'blockdev-snapshot-sync', 'data' :
{ 'device': 'virtio0', 'snapshot-file': '...' } },
{ 'type': 'blockdev-snapshot-sync', 'data' :
{ 'device': 'virtio1', 'snapshot-file': '...' } } ]
} }
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-03-01 06:08:11 +04:00
|
|
|
{"return": {}}
|
2019-11-15 00:34:14 +03:00
|
|
|
{ 'execute': 'transaction', 'arguments': {'actions': [ { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio0', 'snapshot-file': 'TEST_DIR/3-snapshot-v0.IMGFMT' } }, { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio1', 'snapshot-file': 'TEST_DIR/3-snapshot-v1.IMGFMT' } } ] } }
|
qcow2: introduce compression type feature
The patch adds some preparation parts for incompatible compression type
feature to qcow2 allowing the use different compression methods for
image clusters (de)compressing.
It is implied that the compression type is set on the image creation and
can be changed only later by image conversion, thus compression type
defines the only compression algorithm used for the image, and thus,
for all image clusters.
The goal of the feature is to add support of other compression methods
to qcow2. For example, ZSTD which is more effective on compression than ZLIB.
The default compression is ZLIB. Images created with ZLIB compression type
are backward compatible with older qemu versions.
Adding of the compression type breaks a number of tests because now the
compression type is reported on image creation and there are some changes
in the qcow2 header in size and offsets.
The tests are fixed in the following ways:
* filter out compression_type for many tests
* fix header size, feature table size and backing file offset
affected tests: 031, 036, 061, 080
header_size +=8: 1 byte compression type
7 bytes padding
feature_table += 48: incompatible feature compression type
backing_file_offset += 56 (8 + 48 -> header_change + feature_table_change)
* add "compression type" for test output matching when it isn't filtered
affected tests: 049, 060, 061, 065, 082, 085, 144, 182, 185, 198, 206,
242, 255, 274, 280
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
QAPI part:
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200507082521.29210-2-dplotnikov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-05-07 11:25:18 +03:00
|
|
|
Formatting 'TEST_DIR/3-snapshot-v0.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/2-snapshot-v0.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
|
|
|
|
|
Formatting 'TEST_DIR/3-snapshot-v1.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/2-snapshot-v1.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
|
block: qemu-iotests 085 - live snapshots tests
This adds tests for live snapshots, both through the single
snapshot command, and the transaction group snapshot command.
The snapshots are done through the QMP interface, using the
following commands for snapshots:
Single snapshot:
{ 'execute': 'blockdev-snapshot-sync', 'arguments':
{ 'device': 'virtio0', 'snapshot-file':'...',
'format': 'qcow2' } }"
Group snapshot:
{ 'execute': 'transaction', 'arguments':
{'actions': [
{ 'type': 'blockdev-snapshot-sync', 'data' :
{ 'device': 'virtio0', 'snapshot-file': '...' } },
{ 'type': 'blockdev-snapshot-sync', 'data' :
{ 'device': 'virtio1', 'snapshot-file': '...' } } ]
} }
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-03-01 06:08:11 +04:00
|
|
|
{"return": {}}
|
2019-11-15 00:34:14 +03:00
|
|
|
{ 'execute': 'transaction', 'arguments': {'actions': [ { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio0', 'snapshot-file': 'TEST_DIR/4-snapshot-v0.IMGFMT' } }, { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio1', 'snapshot-file': 'TEST_DIR/4-snapshot-v1.IMGFMT' } } ] } }
|
qcow2: introduce compression type feature
The patch adds some preparation parts for incompatible compression type
feature to qcow2 allowing the use different compression methods for
image clusters (de)compressing.
It is implied that the compression type is set on the image creation and
can be changed only later by image conversion, thus compression type
defines the only compression algorithm used for the image, and thus,
for all image clusters.
The goal of the feature is to add support of other compression methods
to qcow2. For example, ZSTD which is more effective on compression than ZLIB.
The default compression is ZLIB. Images created with ZLIB compression type
are backward compatible with older qemu versions.
Adding of the compression type breaks a number of tests because now the
compression type is reported on image creation and there are some changes
in the qcow2 header in size and offsets.
The tests are fixed in the following ways:
* filter out compression_type for many tests
* fix header size, feature table size and backing file offset
affected tests: 031, 036, 061, 080
header_size +=8: 1 byte compression type
7 bytes padding
feature_table += 48: incompatible feature compression type
backing_file_offset += 56 (8 + 48 -> header_change + feature_table_change)
* add "compression type" for test output matching when it isn't filtered
affected tests: 049, 060, 061, 065, 082, 085, 144, 182, 185, 198, 206,
242, 255, 274, 280
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
QAPI part:
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200507082521.29210-2-dplotnikov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-05-07 11:25:18 +03:00
|
|
|
Formatting 'TEST_DIR/4-snapshot-v0.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/3-snapshot-v0.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
|
|
|
|
|
Formatting 'TEST_DIR/4-snapshot-v1.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/3-snapshot-v1.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
|
block: qemu-iotests 085 - live snapshots tests
This adds tests for live snapshots, both through the single
snapshot command, and the transaction group snapshot command.
The snapshots are done through the QMP interface, using the
following commands for snapshots:
Single snapshot:
{ 'execute': 'blockdev-snapshot-sync', 'arguments':
{ 'device': 'virtio0', 'snapshot-file':'...',
'format': 'qcow2' } }"
Group snapshot:
{ 'execute': 'transaction', 'arguments':
{'actions': [
{ 'type': 'blockdev-snapshot-sync', 'data' :
{ 'device': 'virtio0', 'snapshot-file': '...' } },
{ 'type': 'blockdev-snapshot-sync', 'data' :
{ 'device': 'virtio1', 'snapshot-file': '...' } } ]
} }
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-03-01 06:08:11 +04:00
|
|
|
{"return": {}}
|
2019-11-15 00:34:14 +03:00
|
|
|
{ 'execute': 'transaction', 'arguments': {'actions': [ { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio0', 'snapshot-file': 'TEST_DIR/5-snapshot-v0.IMGFMT' } }, { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio1', 'snapshot-file': 'TEST_DIR/5-snapshot-v1.IMGFMT' } } ] } }
|
qcow2: introduce compression type feature
The patch adds some preparation parts for incompatible compression type
feature to qcow2 allowing the use different compression methods for
image clusters (de)compressing.
It is implied that the compression type is set on the image creation and
can be changed only later by image conversion, thus compression type
defines the only compression algorithm used for the image, and thus,
for all image clusters.
The goal of the feature is to add support of other compression methods
to qcow2. For example, ZSTD which is more effective on compression than ZLIB.
The default compression is ZLIB. Images created with ZLIB compression type
are backward compatible with older qemu versions.
Adding of the compression type breaks a number of tests because now the
compression type is reported on image creation and there are some changes
in the qcow2 header in size and offsets.
The tests are fixed in the following ways:
* filter out compression_type for many tests
* fix header size, feature table size and backing file offset
affected tests: 031, 036, 061, 080
header_size +=8: 1 byte compression type
7 bytes padding
feature_table += 48: incompatible feature compression type
backing_file_offset += 56 (8 + 48 -> header_change + feature_table_change)
* add "compression type" for test output matching when it isn't filtered
affected tests: 049, 060, 061, 065, 082, 085, 144, 182, 185, 198, 206,
242, 255, 274, 280
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
QAPI part:
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200507082521.29210-2-dplotnikov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-05-07 11:25:18 +03:00
|
|
|
Formatting 'TEST_DIR/5-snapshot-v0.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/4-snapshot-v0.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
|
|
|
|
|
Formatting 'TEST_DIR/5-snapshot-v1.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/4-snapshot-v1.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
|
block: qemu-iotests 085 - live snapshots tests
This adds tests for live snapshots, both through the single
snapshot command, and the transaction group snapshot command.
The snapshots are done through the QMP interface, using the
following commands for snapshots:
Single snapshot:
{ 'execute': 'blockdev-snapshot-sync', 'arguments':
{ 'device': 'virtio0', 'snapshot-file':'...',
'format': 'qcow2' } }"
Group snapshot:
{ 'execute': 'transaction', 'arguments':
{'actions': [
{ 'type': 'blockdev-snapshot-sync', 'data' :
{ 'device': 'virtio0', 'snapshot-file': '...' } },
{ 'type': 'blockdev-snapshot-sync', 'data' :
{ 'device': 'virtio1', 'snapshot-file': '...' } } ]
} }
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-03-01 06:08:11 +04:00
|
|
|
{"return": {}}
|
2019-11-15 00:34:14 +03:00
|
|
|
{ 'execute': 'transaction', 'arguments': {'actions': [ { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio0', 'snapshot-file': 'TEST_DIR/6-snapshot-v0.IMGFMT' } }, { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio1', 'snapshot-file': 'TEST_DIR/6-snapshot-v1.IMGFMT' } } ] } }
|
qcow2: introduce compression type feature
The patch adds some preparation parts for incompatible compression type
feature to qcow2 allowing the use different compression methods for
image clusters (de)compressing.
It is implied that the compression type is set on the image creation and
can be changed only later by image conversion, thus compression type
defines the only compression algorithm used for the image, and thus,
for all image clusters.
The goal of the feature is to add support of other compression methods
to qcow2. For example, ZSTD which is more effective on compression than ZLIB.
The default compression is ZLIB. Images created with ZLIB compression type
are backward compatible with older qemu versions.
Adding of the compression type breaks a number of tests because now the
compression type is reported on image creation and there are some changes
in the qcow2 header in size and offsets.
The tests are fixed in the following ways:
* filter out compression_type for many tests
* fix header size, feature table size and backing file offset
affected tests: 031, 036, 061, 080
header_size +=8: 1 byte compression type
7 bytes padding
feature_table += 48: incompatible feature compression type
backing_file_offset += 56 (8 + 48 -> header_change + feature_table_change)
* add "compression type" for test output matching when it isn't filtered
affected tests: 049, 060, 061, 065, 082, 085, 144, 182, 185, 198, 206,
242, 255, 274, 280
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
QAPI part:
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200507082521.29210-2-dplotnikov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-05-07 11:25:18 +03:00
|
|
|
Formatting 'TEST_DIR/6-snapshot-v0.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/5-snapshot-v0.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
|
|
|
|
|
Formatting 'TEST_DIR/6-snapshot-v1.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/5-snapshot-v1.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
|
block: qemu-iotests 085 - live snapshots tests
This adds tests for live snapshots, both through the single
snapshot command, and the transaction group snapshot command.
The snapshots are done through the QMP interface, using the
following commands for snapshots:
Single snapshot:
{ 'execute': 'blockdev-snapshot-sync', 'arguments':
{ 'device': 'virtio0', 'snapshot-file':'...',
'format': 'qcow2' } }"
Group snapshot:
{ 'execute': 'transaction', 'arguments':
{'actions': [
{ 'type': 'blockdev-snapshot-sync', 'data' :
{ 'device': 'virtio0', 'snapshot-file': '...' } },
{ 'type': 'blockdev-snapshot-sync', 'data' :
{ 'device': 'virtio1', 'snapshot-file': '...' } } ]
} }
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-03-01 06:08:11 +04:00
|
|
|
{"return": {}}
|
2019-11-15 00:34:14 +03:00
|
|
|
{ 'execute': 'transaction', 'arguments': {'actions': [ { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio0', 'snapshot-file': 'TEST_DIR/7-snapshot-v0.IMGFMT' } }, { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio1', 'snapshot-file': 'TEST_DIR/7-snapshot-v1.IMGFMT' } } ] } }
|
qcow2: introduce compression type feature
The patch adds some preparation parts for incompatible compression type
feature to qcow2 allowing the use different compression methods for
image clusters (de)compressing.
It is implied that the compression type is set on the image creation and
can be changed only later by image conversion, thus compression type
defines the only compression algorithm used for the image, and thus,
for all image clusters.
The goal of the feature is to add support of other compression methods
to qcow2. For example, ZSTD which is more effective on compression than ZLIB.
The default compression is ZLIB. Images created with ZLIB compression type
are backward compatible with older qemu versions.
Adding of the compression type breaks a number of tests because now the
compression type is reported on image creation and there are some changes
in the qcow2 header in size and offsets.
The tests are fixed in the following ways:
* filter out compression_type for many tests
* fix header size, feature table size and backing file offset
affected tests: 031, 036, 061, 080
header_size +=8: 1 byte compression type
7 bytes padding
feature_table += 48: incompatible feature compression type
backing_file_offset += 56 (8 + 48 -> header_change + feature_table_change)
* add "compression type" for test output matching when it isn't filtered
affected tests: 049, 060, 061, 065, 082, 085, 144, 182, 185, 198, 206,
242, 255, 274, 280
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
QAPI part:
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200507082521.29210-2-dplotnikov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-05-07 11:25:18 +03:00
|
|
|
Formatting 'TEST_DIR/7-snapshot-v0.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/6-snapshot-v0.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
|
|
|
|
|
Formatting 'TEST_DIR/7-snapshot-v1.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/6-snapshot-v1.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
|
block: qemu-iotests 085 - live snapshots tests
This adds tests for live snapshots, both through the single
snapshot command, and the transaction group snapshot command.
The snapshots are done through the QMP interface, using the
following commands for snapshots:
Single snapshot:
{ 'execute': 'blockdev-snapshot-sync', 'arguments':
{ 'device': 'virtio0', 'snapshot-file':'...',
'format': 'qcow2' } }"
Group snapshot:
{ 'execute': 'transaction', 'arguments':
{'actions': [
{ 'type': 'blockdev-snapshot-sync', 'data' :
{ 'device': 'virtio0', 'snapshot-file': '...' } },
{ 'type': 'blockdev-snapshot-sync', 'data' :
{ 'device': 'virtio1', 'snapshot-file': '...' } } ]
} }
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-03-01 06:08:11 +04:00
|
|
|
{"return": {}}
|
2019-11-15 00:34:14 +03:00
|
|
|
{ 'execute': 'transaction', 'arguments': {'actions': [ { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio0', 'snapshot-file': 'TEST_DIR/8-snapshot-v0.IMGFMT' } }, { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio1', 'snapshot-file': 'TEST_DIR/8-snapshot-v1.IMGFMT' } } ] } }
|
qcow2: introduce compression type feature
The patch adds some preparation parts for incompatible compression type
feature to qcow2 allowing the use different compression methods for
image clusters (de)compressing.
It is implied that the compression type is set on the image creation and
can be changed only later by image conversion, thus compression type
defines the only compression algorithm used for the image, and thus,
for all image clusters.
The goal of the feature is to add support of other compression methods
to qcow2. For example, ZSTD which is more effective on compression than ZLIB.
The default compression is ZLIB. Images created with ZLIB compression type
are backward compatible with older qemu versions.
Adding of the compression type breaks a number of tests because now the
compression type is reported on image creation and there are some changes
in the qcow2 header in size and offsets.
The tests are fixed in the following ways:
* filter out compression_type for many tests
* fix header size, feature table size and backing file offset
affected tests: 031, 036, 061, 080
header_size +=8: 1 byte compression type
7 bytes padding
feature_table += 48: incompatible feature compression type
backing_file_offset += 56 (8 + 48 -> header_change + feature_table_change)
* add "compression type" for test output matching when it isn't filtered
affected tests: 049, 060, 061, 065, 082, 085, 144, 182, 185, 198, 206,
242, 255, 274, 280
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
QAPI part:
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200507082521.29210-2-dplotnikov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-05-07 11:25:18 +03:00
|
|
|
Formatting 'TEST_DIR/8-snapshot-v0.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/7-snapshot-v0.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
|
|
|
|
|
Formatting 'TEST_DIR/8-snapshot-v1.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/7-snapshot-v1.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
|
block: qemu-iotests 085 - live snapshots tests
This adds tests for live snapshots, both through the single
snapshot command, and the transaction group snapshot command.
The snapshots are done through the QMP interface, using the
following commands for snapshots:
Single snapshot:
{ 'execute': 'blockdev-snapshot-sync', 'arguments':
{ 'device': 'virtio0', 'snapshot-file':'...',
'format': 'qcow2' } }"
Group snapshot:
{ 'execute': 'transaction', 'arguments':
{'actions': [
{ 'type': 'blockdev-snapshot-sync', 'data' :
{ 'device': 'virtio0', 'snapshot-file': '...' } },
{ 'type': 'blockdev-snapshot-sync', 'data' :
{ 'device': 'virtio1', 'snapshot-file': '...' } } ]
} }
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-03-01 06:08:11 +04:00
|
|
|
{"return": {}}
|
2019-11-15 00:34:14 +03:00
|
|
|
{ 'execute': 'transaction', 'arguments': {'actions': [ { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio0', 'snapshot-file': 'TEST_DIR/9-snapshot-v0.IMGFMT' } }, { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio1', 'snapshot-file': 'TEST_DIR/9-snapshot-v1.IMGFMT' } } ] } }
|
qcow2: introduce compression type feature
The patch adds some preparation parts for incompatible compression type
feature to qcow2 allowing the use different compression methods for
image clusters (de)compressing.
It is implied that the compression type is set on the image creation and
can be changed only later by image conversion, thus compression type
defines the only compression algorithm used for the image, and thus,
for all image clusters.
The goal of the feature is to add support of other compression methods
to qcow2. For example, ZSTD which is more effective on compression than ZLIB.
The default compression is ZLIB. Images created with ZLIB compression type
are backward compatible with older qemu versions.
Adding of the compression type breaks a number of tests because now the
compression type is reported on image creation and there are some changes
in the qcow2 header in size and offsets.
The tests are fixed in the following ways:
* filter out compression_type for many tests
* fix header size, feature table size and backing file offset
affected tests: 031, 036, 061, 080
header_size +=8: 1 byte compression type
7 bytes padding
feature_table += 48: incompatible feature compression type
backing_file_offset += 56 (8 + 48 -> header_change + feature_table_change)
* add "compression type" for test output matching when it isn't filtered
affected tests: 049, 060, 061, 065, 082, 085, 144, 182, 185, 198, 206,
242, 255, 274, 280
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
QAPI part:
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200507082521.29210-2-dplotnikov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-05-07 11:25:18 +03:00
|
|
|
Formatting 'TEST_DIR/9-snapshot-v0.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/8-snapshot-v0.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
|
|
|
|
|
Formatting 'TEST_DIR/9-snapshot-v1.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/8-snapshot-v1.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
|
block: qemu-iotests 085 - live snapshots tests
This adds tests for live snapshots, both through the single
snapshot command, and the transaction group snapshot command.
The snapshots are done through the QMP interface, using the
following commands for snapshots:
Single snapshot:
{ 'execute': 'blockdev-snapshot-sync', 'arguments':
{ 'device': 'virtio0', 'snapshot-file':'...',
'format': 'qcow2' } }"
Group snapshot:
{ 'execute': 'transaction', 'arguments':
{'actions': [
{ 'type': 'blockdev-snapshot-sync', 'data' :
{ 'device': 'virtio0', 'snapshot-file': '...' } },
{ 'type': 'blockdev-snapshot-sync', 'data' :
{ 'device': 'virtio1', 'snapshot-file': '...' } } ]
} }
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-03-01 06:08:11 +04:00
|
|
|
{"return": {}}
|
2019-11-15 00:34:14 +03:00
|
|
|
{ 'execute': 'transaction', 'arguments': {'actions': [ { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio0', 'snapshot-file': 'TEST_DIR/10-snapshot-v0.IMGFMT' } }, { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio1', 'snapshot-file': 'TEST_DIR/10-snapshot-v1.IMGFMT' } } ] } }
|
qcow2: introduce compression type feature
The patch adds some preparation parts for incompatible compression type
feature to qcow2 allowing the use different compression methods for
image clusters (de)compressing.
It is implied that the compression type is set on the image creation and
can be changed only later by image conversion, thus compression type
defines the only compression algorithm used for the image, and thus,
for all image clusters.
The goal of the feature is to add support of other compression methods
to qcow2. For example, ZSTD which is more effective on compression than ZLIB.
The default compression is ZLIB. Images created with ZLIB compression type
are backward compatible with older qemu versions.
Adding of the compression type breaks a number of tests because now the
compression type is reported on image creation and there are some changes
in the qcow2 header in size and offsets.
The tests are fixed in the following ways:
* filter out compression_type for many tests
* fix header size, feature table size and backing file offset
affected tests: 031, 036, 061, 080
header_size +=8: 1 byte compression type
7 bytes padding
feature_table += 48: incompatible feature compression type
backing_file_offset += 56 (8 + 48 -> header_change + feature_table_change)
* add "compression type" for test output matching when it isn't filtered
affected tests: 049, 060, 061, 065, 082, 085, 144, 182, 185, 198, 206,
242, 255, 274, 280
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
QAPI part:
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200507082521.29210-2-dplotnikov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-05-07 11:25:18 +03:00
|
|
|
Formatting 'TEST_DIR/10-snapshot-v0.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/9-snapshot-v0.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
|
|
|
|
|
Formatting 'TEST_DIR/10-snapshot-v1.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/9-snapshot-v1.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
|
block: qemu-iotests 085 - live snapshots tests
This adds tests for live snapshots, both through the single
snapshot command, and the transaction group snapshot command.
The snapshots are done through the QMP interface, using the
following commands for snapshots:
Single snapshot:
{ 'execute': 'blockdev-snapshot-sync', 'arguments':
{ 'device': 'virtio0', 'snapshot-file':'...',
'format': 'qcow2' } }"
Group snapshot:
{ 'execute': 'transaction', 'arguments':
{'actions': [
{ 'type': 'blockdev-snapshot-sync', 'data' :
{ 'device': 'virtio0', 'snapshot-file': '...' } },
{ 'type': 'blockdev-snapshot-sync', 'data' :
{ 'device': 'virtio1', 'snapshot-file': '...' } } ]
} }
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-03-01 06:08:11 +04:00
|
|
|
{"return": {}}
|
2015-10-26 15:27:17 +03:00
|
|
|
|
|
|
|
|
=== Create a couple of snapshots using blockdev-snapshot ===
|
|
|
|
|
|
2019-11-07 19:37:02 +03:00
|
|
|
Formatting 'TEST_DIR/11-snapshot-v0.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/10-snapshot-v0.IMGFMT
|
2019-11-15 00:34:14 +03:00
|
|
|
{ 'execute': 'blockdev-add', 'arguments': { 'driver': 'IMGFMT', 'node-name': 'snap_11', 'backing': null, 'file': { 'driver': 'file', 'filename': 'TEST_DIR/11-snapshot-v0.IMGFMT', 'node-name': 'file_11' } } }
|
2015-10-26 15:27:17 +03:00
|
|
|
{"return": {}}
|
2019-11-15 00:34:14 +03:00
|
|
|
{ 'execute': 'blockdev-snapshot', 'arguments': { 'node': 'virtio0', 'overlay':'snap_11' } }
|
2015-10-26 15:27:17 +03:00
|
|
|
{"return": {}}
|
2019-11-07 19:37:02 +03:00
|
|
|
Formatting 'TEST_DIR/12-snapshot-v0.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/11-snapshot-v0.IMGFMT
|
2019-11-15 00:34:14 +03:00
|
|
|
{ 'execute': 'blockdev-add', 'arguments': { 'driver': 'IMGFMT', 'node-name': 'snap_12', 'backing': null, 'file': { 'driver': 'file', 'filename': 'TEST_DIR/12-snapshot-v0.IMGFMT', 'node-name': 'file_12' } } }
|
2015-10-26 15:27:17 +03:00
|
|
|
{"return": {}}
|
2019-11-15 00:34:14 +03:00
|
|
|
{ 'execute': 'blockdev-snapshot', 'arguments': { 'node': 'virtio0', 'overlay':'snap_12' } }
|
2015-10-26 15:27:17 +03:00
|
|
|
{"return": {}}
|
|
|
|
|
|
2015-11-03 13:32:37 +03:00
|
|
|
=== Invalid command - cannot create a snapshot using a file BDS ===
|
|
|
|
|
|
2019-11-15 00:34:14 +03:00
|
|
|
{ 'execute': 'blockdev-snapshot', 'arguments': { 'node':'virtio0', 'overlay':'file_12' } }
|
block: Relax restrictions for blockdev-snapshot
blockdev-snapshot returned an error if the overlay was already in use,
which it defined as having any BlockBackend parent. This is in fact both
too strict (some parents can tolerate the change of visible data caused
by attaching a backing file) and too loose (some non-BlockBackend
parents may not be happy with it).
One important use case that is prevented by the too strict check is live
storage migration with blockdev-mirror. Here, the target node is
usually opened without a backing file so that the active layer is
mirrored while its backing chain can be copied in the background.
The backing chain should be attached to the mirror target node when
finalising the job, just before switching the users of the source node
to the new copy (at which point the mirror job still has a reference to
the node). drive-mirror did this automatically, but with blockdev-mirror
this is the job of the QMP client, so it needs a way to do this.
blockdev-snapshot is the obvious way, so this patch makes it work in
this scenario. The new condition is that no parent uses CONSISTENT_READ
permissions. This will ensure that the operation will still be blocked
when the node is attached to the guest device, so blockdev-snapshot
remains safe.
(For the sake of completeness, x-blockdev-reopen can be used to achieve
the same, however it is a big hammer, performs the graph change
completely unchecked and is still experimental. So even with the option
of using x-blockdev-reopen, there are reasons why blockdev-snapshot
should be able to perform this operation.)
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200310113831.27293-3-kwolf@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-03-10 14:38:26 +03:00
|
|
|
{"error": {"class": "GenericError", "desc": "The overlay is already in use"}}
|
2015-11-03 13:32:37 +03:00
|
|
|
|
2015-10-26 15:27:17 +03:00
|
|
|
=== Invalid command - snapshot node used as active layer ===
|
|
|
|
|
|
2019-11-15 00:34:14 +03:00
|
|
|
{ 'execute': 'blockdev-snapshot', 'arguments': { 'node': 'virtio0', 'overlay':'snap_12' } }
|
2019-06-03 23:22:36 +03:00
|
|
|
{"error": {"class": "GenericError", "desc": "The overlay is already in use"}}
|
2019-11-15 00:34:14 +03:00
|
|
|
{ 'execute': 'blockdev-snapshot', 'arguments': { 'node':'virtio0', 'overlay':'virtio0' } }
|
2019-06-03 23:22:36 +03:00
|
|
|
{"error": {"class": "GenericError", "desc": "The overlay is already in use"}}
|
2019-11-15 00:34:14 +03:00
|
|
|
{ 'execute': 'blockdev-snapshot', 'arguments': { 'node':'virtio0', 'overlay':'virtio1' } }
|
2019-06-03 23:22:36 +03:00
|
|
|
{"error": {"class": "GenericError", "desc": "The overlay is already in use"}}
|
2015-10-26 15:27:17 +03:00
|
|
|
|
|
|
|
|
=== Invalid command - snapshot node used as backing hd ===
|
|
|
|
|
|
2019-11-15 00:34:14 +03:00
|
|
|
{ 'execute': 'blockdev-snapshot', 'arguments': { 'node': 'virtio0', 'overlay':'snap_11' } }
|
block: Relax restrictions for blockdev-snapshot
blockdev-snapshot returned an error if the overlay was already in use,
which it defined as having any BlockBackend parent. This is in fact both
too strict (some parents can tolerate the change of visible data caused
by attaching a backing file) and too loose (some non-BlockBackend
parents may not be happy with it).
One important use case that is prevented by the too strict check is live
storage migration with blockdev-mirror. Here, the target node is
usually opened without a backing file so that the active layer is
mirrored while its backing chain can be copied in the background.
The backing chain should be attached to the mirror target node when
finalising the job, just before switching the users of the source node
to the new copy (at which point the mirror job still has a reference to
the node). drive-mirror did this automatically, but with blockdev-mirror
this is the job of the QMP client, so it needs a way to do this.
blockdev-snapshot is the obvious way, so this patch makes it work in
this scenario. The new condition is that no parent uses CONSISTENT_READ
permissions. This will ensure that the operation will still be blocked
when the node is attached to the guest device, so blockdev-snapshot
remains safe.
(For the sake of completeness, x-blockdev-reopen can be used to achieve
the same, however it is a big hammer, performs the graph change
completely unchecked and is still experimental. So even with the option
of using x-blockdev-reopen, there are reasons why blockdev-snapshot
should be able to perform this operation.)
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200310113831.27293-3-kwolf@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-03-10 14:38:26 +03:00
|
|
|
{"error": {"class": "GenericError", "desc": "The overlay is already in use"}}
|
2015-10-26 15:27:17 +03:00
|
|
|
|
|
|
|
|
=== Invalid command - snapshot node has a backing image ===
|
|
|
|
|
|
2017-05-02 19:35:45 +03:00
|
|
|
Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=134217728
|
|
|
|
|
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/t.IMGFMT.base
|
2019-11-15 00:34:14 +03:00
|
|
|
{ 'execute': 'blockdev-add', 'arguments': { 'driver': 'IMGFMT', 'node-name': 'snap_13', 'file': { 'driver': 'file', 'filename': 'TEST_DIR/t.IMGFMT', 'node-name': 'file_13' } } }
|
2015-10-26 15:27:17 +03:00
|
|
|
{"return": {}}
|
2019-11-15 00:34:14 +03:00
|
|
|
{ 'execute': 'blockdev-snapshot', 'arguments': { 'node': 'virtio0', 'overlay':'snap_13' } }
|
2019-06-03 23:22:36 +03:00
|
|
|
{"error": {"class": "GenericError", "desc": "The overlay already has a backing image"}}
|
2015-10-26 15:27:17 +03:00
|
|
|
|
|
|
|
|
=== Invalid command - The node does not exist ===
|
|
|
|
|
|
2019-11-15 00:34:14 +03:00
|
|
|
{ 'execute': 'blockdev-snapshot', 'arguments': { 'node': 'virtio0', 'overlay':'snap_14' } }
|
2015-10-26 15:27:17 +03:00
|
|
|
{"error": {"class": "GenericError", "desc": "Cannot find device=snap_14 nor node_name=snap_14"}}
|
2019-11-15 00:34:14 +03:00
|
|
|
{ 'execute': 'blockdev-snapshot', 'arguments': { 'node':'nodevice', 'overlay':'snap_13' } }
|
2015-10-26 15:27:17 +03:00
|
|
|
{"error": {"class": "GenericError", "desc": "Cannot find device=nodevice nor node_name=nodevice"}}
|
block: qemu-iotests 085 - live snapshots tests
This adds tests for live snapshots, both through the single
snapshot command, and the transaction group snapshot command.
The snapshots are done through the QMP interface, using the
following commands for snapshots:
Single snapshot:
{ 'execute': 'blockdev-snapshot-sync', 'arguments':
{ 'device': 'virtio0', 'snapshot-file':'...',
'format': 'qcow2' } }"
Group snapshot:
{ 'execute': 'transaction', 'arguments':
{'actions': [
{ 'type': 'blockdev-snapshot-sync', 'data' :
{ 'device': 'virtio0', 'snapshot-file': '...' } },
{ 'type': 'blockdev-snapshot-sync', 'data' :
{ 'device': 'virtio1', 'snapshot-file': '...' } } ]
} }
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-03-01 06:08:11 +04:00
|
|
|
*** done
|