qemu/hw/acpi/meson.build

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

42 lines
2.5 KiB
Meson
Raw Normal View History

acpi_ss = ss.source_set()
acpi_ss.add(files(
'acpi_interface.c',
'aml-build.c',
'bios-linker-loader.c',
'core.c',
'utils.c',
))
hw/acpi: refactor acpi hp modules so that targets can just use what they need Currently various acpi hotplug modules like cpu hotplug, memory hotplug, pci hotplug, nvdimm hotplug are all pulled in when CONFIG_ACPI_X86 is turned on. This brings in support for whole lot of subsystems that some targets like mips does not need. They are added just to satisfy symbol dependencies. This is ugly and should be avoided. Targets should be able to pull in just what they need and no more. For example, mips only needs support for PIIX4 and does not need acpi pci hotplug support or cpu hotplug support or memory hotplug support etc. This change is an effort to clean this up. In this change, new config variables are added for various acpi hotplug subsystems. Targets like mips can only enable PIIX4 support and not the rest of all the other modules which were being previously pulled in as a part of CONFIG_ACPI_X86. Function stubs make sure that symbols which piix4 needs but are not required by mips (for example, symbols specific to pci hotplug etc) are available to satisfy the dependencies. Currently, this change only addresses issues with mips malta targets. In future we might be able to clean up other targets which are similarly pulling in lot of unnecessary hotplug modules by enabling ACPI_X86. This change should also address issues such as the following: https://gitlab.com/qemu-project/qemu/-/issues/221 https://gitlab.com/qemu-project/qemu/-/issues/193 Signed-off-by: Ani Sinha <ani@anisinha.ca> Message-Id: <20210812071409.492299-1-ani@anisinha.ca> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-08-12 10:14:09 +03:00
acpi_ss.add(when: 'CONFIG_ACPI_CPU_HOTPLUG', if_true: files('cpu.c', 'cpu_hotplug.c'))
acpi_ss.add(when: 'CONFIG_ACPI_CPU_HOTPLUG', if_false: files('acpi-cpu-hotplug-stub.c'))
acpi_ss.add(when: 'CONFIG_ACPI_MEMORY_HOTPLUG', if_true: files('memory_hotplug.c'))
hw/acpi: refactor acpi hp modules so that targets can just use what they need Currently various acpi hotplug modules like cpu hotplug, memory hotplug, pci hotplug, nvdimm hotplug are all pulled in when CONFIG_ACPI_X86 is turned on. This brings in support for whole lot of subsystems that some targets like mips does not need. They are added just to satisfy symbol dependencies. This is ugly and should be avoided. Targets should be able to pull in just what they need and no more. For example, mips only needs support for PIIX4 and does not need acpi pci hotplug support or cpu hotplug support or memory hotplug support etc. This change is an effort to clean this up. In this change, new config variables are added for various acpi hotplug subsystems. Targets like mips can only enable PIIX4 support and not the rest of all the other modules which were being previously pulled in as a part of CONFIG_ACPI_X86. Function stubs make sure that symbols which piix4 needs but are not required by mips (for example, symbols specific to pci hotplug etc) are available to satisfy the dependencies. Currently, this change only addresses issues with mips malta targets. In future we might be able to clean up other targets which are similarly pulling in lot of unnecessary hotplug modules by enabling ACPI_X86. This change should also address issues such as the following: https://gitlab.com/qemu-project/qemu/-/issues/221 https://gitlab.com/qemu-project/qemu/-/issues/193 Signed-off-by: Ani Sinha <ani@anisinha.ca> Message-Id: <20210812071409.492299-1-ani@anisinha.ca> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-08-12 10:14:09 +03:00
acpi_ss.add(when: 'CONFIG_ACPI_MEMORY_HOTPLUG', if_false: files('acpi-mem-hotplug-stub.c'))
acpi_ss.add(when: 'CONFIG_ACPI_NVDIMM', if_true: files('nvdimm.c'))
hw/acpi: refactor acpi hp modules so that targets can just use what they need Currently various acpi hotplug modules like cpu hotplug, memory hotplug, pci hotplug, nvdimm hotplug are all pulled in when CONFIG_ACPI_X86 is turned on. This brings in support for whole lot of subsystems that some targets like mips does not need. They are added just to satisfy symbol dependencies. This is ugly and should be avoided. Targets should be able to pull in just what they need and no more. For example, mips only needs support for PIIX4 and does not need acpi pci hotplug support or cpu hotplug support or memory hotplug support etc. This change is an effort to clean this up. In this change, new config variables are added for various acpi hotplug subsystems. Targets like mips can only enable PIIX4 support and not the rest of all the other modules which were being previously pulled in as a part of CONFIG_ACPI_X86. Function stubs make sure that symbols which piix4 needs but are not required by mips (for example, symbols specific to pci hotplug etc) are available to satisfy the dependencies. Currently, this change only addresses issues with mips malta targets. In future we might be able to clean up other targets which are similarly pulling in lot of unnecessary hotplug modules by enabling ACPI_X86. This change should also address issues such as the following: https://gitlab.com/qemu-project/qemu/-/issues/221 https://gitlab.com/qemu-project/qemu/-/issues/193 Signed-off-by: Ani Sinha <ani@anisinha.ca> Message-Id: <20210812071409.492299-1-ani@anisinha.ca> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-08-12 10:14:09 +03:00
acpi_ss.add(when: 'CONFIG_ACPI_NVDIMM', if_false: files('acpi-nvdimm-stub.c'))
acpi_ss.add(when: 'CONFIG_ACPI_PCI', if_true: files('pci.c'))
acpi/cxl: Add _OSC implementation (9.14.2) CXL 2.0 specification adds 2 new dwords to the existing _OSC definition from PCIe. The new dwords are accessed with a new uuid. This implementation supports what is in the specification. iasl -d decodes the result of this patch as: Name (SUPP, Zero) Name (CTRL, Zero) Name (SUPC, Zero) Name (CTRC, Zero) Method (_OSC, 4, NotSerialized) // _OSC: Operating System Capabilities { CreateDWordField (Arg3, Zero, CDW1) If (((Arg0 == ToUUID ("33db4d5b-1ff7-401c-9657-7441c03dd766") /* PCI Host Bridge Device */) || (Arg0 == ToUUID ("68f2d50b-c469-4d8a-bd3d-941a103fd3fc") /* Unknown UUID */))) { CreateDWordField (Arg3, 0x04, CDW2) CreateDWordField (Arg3, 0x08, CDW3) Local0 = CDW3 /* \_SB_.PC0C._OSC.CDW3 */ Local0 &= 0x1F If ((Arg1 != One)) { CDW1 |= 0x08 } If ((CDW3 != Local0)) { CDW1 |= 0x10 } SUPP = CDW2 /* \_SB_.PC0C._OSC.CDW2 */ CTRL = CDW3 /* \_SB_.PC0C._OSC.CDW3 */ CDW3 = Local0 If ((Arg0 == ToUUID ("68f2d50b-c469-4d8a-bd3d-941a103fd3fc") /* Unknown UUID */)) { CreateDWordField (Arg3, 0x0C, CDW4) CreateDWordField (Arg3, 0x10, CDW5) SUPC = CDW4 /* \_SB_.PC0C._OSC.CDW4 */ CTRC = CDW5 /* \_SB_.PC0C._OSC.CDW5 */ CDW5 |= One } Return (Arg3) } Else { CDW1 |= 0x04 Return (Arg3) } Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20220429144110.25167-25-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-04-29 17:40:49 +03:00
acpi_ss.add(when: 'CONFIG_ACPI_CXL', if_true: files('cxl.c'), if_false: files('cxl-stub.c'))
acpi_ss.add(when: 'CONFIG_ACPI_VMGENID', if_true: files('vmgenid.c'))
acpi_ss.add(when: 'CONFIG_ACPI_HW_REDUCED', if_true: files('generic_event_device.c'))
acpi_ss.add(when: 'CONFIG_ACPI_HMAT', if_true: files('hmat.c'))
acpi_ss.add(when: 'CONFIG_ACPI_APEI', if_true: files('ghes.c'), if_false: files('ghes-stub.c'))
hw/acpi: refactor acpi hp modules so that targets can just use what they need Currently various acpi hotplug modules like cpu hotplug, memory hotplug, pci hotplug, nvdimm hotplug are all pulled in when CONFIG_ACPI_X86 is turned on. This brings in support for whole lot of subsystems that some targets like mips does not need. They are added just to satisfy symbol dependencies. This is ugly and should be avoided. Targets should be able to pull in just what they need and no more. For example, mips only needs support for PIIX4 and does not need acpi pci hotplug support or cpu hotplug support or memory hotplug support etc. This change is an effort to clean this up. In this change, new config variables are added for various acpi hotplug subsystems. Targets like mips can only enable PIIX4 support and not the rest of all the other modules which were being previously pulled in as a part of CONFIG_ACPI_X86. Function stubs make sure that symbols which piix4 needs but are not required by mips (for example, symbols specific to pci hotplug etc) are available to satisfy the dependencies. Currently, this change only addresses issues with mips malta targets. In future we might be able to clean up other targets which are similarly pulling in lot of unnecessary hotplug modules by enabling ACPI_X86. This change should also address issues such as the following: https://gitlab.com/qemu-project/qemu/-/issues/221 https://gitlab.com/qemu-project/qemu/-/issues/193 Signed-off-by: Ani Sinha <ani@anisinha.ca> Message-Id: <20210812071409.492299-1-ani@anisinha.ca> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-08-12 10:14:09 +03:00
acpi_ss.add(when: 'CONFIG_ACPI_PIIX4', if_true: files('piix4.c'))
acpi_ss.add(when: 'CONFIG_ACPI_PCI_BRIDGE', if_true: files('pci-bridge.c'))
hw/acpi: refactor acpi hp modules so that targets can just use what they need Currently various acpi hotplug modules like cpu hotplug, memory hotplug, pci hotplug, nvdimm hotplug are all pulled in when CONFIG_ACPI_X86 is turned on. This brings in support for whole lot of subsystems that some targets like mips does not need. They are added just to satisfy symbol dependencies. This is ugly and should be avoided. Targets should be able to pull in just what they need and no more. For example, mips only needs support for PIIX4 and does not need acpi pci hotplug support or cpu hotplug support or memory hotplug support etc. This change is an effort to clean this up. In this change, new config variables are added for various acpi hotplug subsystems. Targets like mips can only enable PIIX4 support and not the rest of all the other modules which were being previously pulled in as a part of CONFIG_ACPI_X86. Function stubs make sure that symbols which piix4 needs but are not required by mips (for example, symbols specific to pci hotplug etc) are available to satisfy the dependencies. Currently, this change only addresses issues with mips malta targets. In future we might be able to clean up other targets which are similarly pulling in lot of unnecessary hotplug modules by enabling ACPI_X86. This change should also address issues such as the following: https://gitlab.com/qemu-project/qemu/-/issues/221 https://gitlab.com/qemu-project/qemu/-/issues/193 Signed-off-by: Ani Sinha <ani@anisinha.ca> Message-Id: <20210812071409.492299-1-ani@anisinha.ca> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-08-12 10:14:09 +03:00
acpi_ss.add(when: 'CONFIG_ACPI_PCIHP', if_true: files('pcihp.c'))
acpi_ss.add(when: 'CONFIG_ACPI_PCIHP', if_false: files('acpi-pci-hotplug-stub.c'))
acpi_ss.add(when: 'CONFIG_ACPI_VIOT', if_true: files('viot.c'))
acpi_ss.add(when: 'CONFIG_ACPI_ICH9', if_true: files('ich9.c', 'ich9_tco.c'))
acpi_ss.add(when: 'CONFIG_ACPI_ERST', if_true: files('erst.c'))
acpi_ss.add(when: 'CONFIG_IPMI', if_true: files('ipmi.c'), if_false: files('ipmi-stub.c'))
acpi_ss.add(when: 'CONFIG_PC', if_false: files('acpi-x86-stub.c'))
if have_tpm
acpi_ss.add(files('tpm.c'))
endif
softmmu_ss.add(when: 'CONFIG_ACPI', if_false: files('acpi-stub.c', 'aml-build-stub.c', 'ghes-stub.c', 'acpi_interface.c'))
softmmu_ss.add(when: 'CONFIG_ACPI_PCI_BRIDGE', if_false: files('pci-bridge-stub.c'))
softmmu_ss.add_all(when: 'CONFIG_ACPI', if_true: acpi_ss)
softmmu_ss.add(when: 'CONFIG_ALL', if_true: files('acpi-stub.c', 'aml-build-stub.c',
hw/acpi: refactor acpi hp modules so that targets can just use what they need Currently various acpi hotplug modules like cpu hotplug, memory hotplug, pci hotplug, nvdimm hotplug are all pulled in when CONFIG_ACPI_X86 is turned on. This brings in support for whole lot of subsystems that some targets like mips does not need. They are added just to satisfy symbol dependencies. This is ugly and should be avoided. Targets should be able to pull in just what they need and no more. For example, mips only needs support for PIIX4 and does not need acpi pci hotplug support or cpu hotplug support or memory hotplug support etc. This change is an effort to clean this up. In this change, new config variables are added for various acpi hotplug subsystems. Targets like mips can only enable PIIX4 support and not the rest of all the other modules which were being previously pulled in as a part of CONFIG_ACPI_X86. Function stubs make sure that symbols which piix4 needs but are not required by mips (for example, symbols specific to pci hotplug etc) are available to satisfy the dependencies. Currently, this change only addresses issues with mips malta targets. In future we might be able to clean up other targets which are similarly pulling in lot of unnecessary hotplug modules by enabling ACPI_X86. This change should also address issues such as the following: https://gitlab.com/qemu-project/qemu/-/issues/221 https://gitlab.com/qemu-project/qemu/-/issues/193 Signed-off-by: Ani Sinha <ani@anisinha.ca> Message-Id: <20210812071409.492299-1-ani@anisinha.ca> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-08-12 10:14:09 +03:00
'acpi-x86-stub.c', 'ipmi-stub.c', 'ghes-stub.c',
'acpi-mem-hotplug-stub.c', 'acpi-cpu-hotplug-stub.c',
acpi/cxl: Add _OSC implementation (9.14.2) CXL 2.0 specification adds 2 new dwords to the existing _OSC definition from PCIe. The new dwords are accessed with a new uuid. This implementation supports what is in the specification. iasl -d decodes the result of this patch as: Name (SUPP, Zero) Name (CTRL, Zero) Name (SUPC, Zero) Name (CTRC, Zero) Method (_OSC, 4, NotSerialized) // _OSC: Operating System Capabilities { CreateDWordField (Arg3, Zero, CDW1) If (((Arg0 == ToUUID ("33db4d5b-1ff7-401c-9657-7441c03dd766") /* PCI Host Bridge Device */) || (Arg0 == ToUUID ("68f2d50b-c469-4d8a-bd3d-941a103fd3fc") /* Unknown UUID */))) { CreateDWordField (Arg3, 0x04, CDW2) CreateDWordField (Arg3, 0x08, CDW3) Local0 = CDW3 /* \_SB_.PC0C._OSC.CDW3 */ Local0 &= 0x1F If ((Arg1 != One)) { CDW1 |= 0x08 } If ((CDW3 != Local0)) { CDW1 |= 0x10 } SUPP = CDW2 /* \_SB_.PC0C._OSC.CDW2 */ CTRL = CDW3 /* \_SB_.PC0C._OSC.CDW3 */ CDW3 = Local0 If ((Arg0 == ToUUID ("68f2d50b-c469-4d8a-bd3d-941a103fd3fc") /* Unknown UUID */)) { CreateDWordField (Arg3, 0x0C, CDW4) CreateDWordField (Arg3, 0x10, CDW5) SUPC = CDW4 /* \_SB_.PC0C._OSC.CDW4 */ CTRC = CDW5 /* \_SB_.PC0C._OSC.CDW5 */ CDW5 |= One } Return (Arg3) } Else { CDW1 |= 0x04 Return (Arg3) } Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20220429144110.25167-25-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-04-29 17:40:49 +03:00
'acpi-pci-hotplug-stub.c', 'acpi-nvdimm-stub.c',
'cxl-stub.c', 'pci-bridge-stub.c'))
softmmu_ss.add(files('acpi-qmp-cmds.c'))