qemu/linux-user/user-internals.h

188 lines
5.6 KiB
C
Raw Normal View History

/*
* user-internals.h: prototypes etc internal to the linux-user implementation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see <http://www.gnu.org/licenses/>.
*/
#ifndef LINUX_USER_USER_INTERNALS_H
#define LINUX_USER_USER_INTERNALS_H
#include "exec/user/thunk.h"
#include "exec/exec-all.h"
#include "exec/tb-flush.h"
#include "qemu/log.h"
extern char *exec_path;
void init_task_state(TaskState *ts);
void task_settid(TaskState *);
void stop_all_tasks(void);
extern const char *qemu_uname_release;
extern unsigned long mmap_min_addr;
typedef struct IOCTLEntry IOCTLEntry;
typedef abi_long do_ioctl_fn(const IOCTLEntry *ie, uint8_t *buf_temp,
int fd, int cmd, abi_long arg);
struct IOCTLEntry {
int target_cmd;
unsigned int host_cmd;
const char *name;
int access;
do_ioctl_fn *do_ioctl;
const argtype arg_type[5];
};
extern IOCTLEntry ioctl_entries[];
#define IOC_R 0x0001
#define IOC_W 0x0002
#define IOC_RW (IOC_R | IOC_W)
/*
* Returns true if the image uses the FDPIC ABI. If this is the case,
* we have to provide some information (loadmap, pt_dynamic_info) such
* that the program can be relocated adequately. This is also useful
* when handling signals.
*/
int info_is_fdpic(struct image_info *info);
void target_set_brk(abi_ulong new_brk);
void syscall_init(void);
abi_long do_syscall(CPUArchState *cpu_env, int num, abi_long arg1,
abi_long arg2, abi_long arg3, abi_long arg4,
abi_long arg5, abi_long arg6, abi_long arg7,
abi_long arg8);
extern __thread CPUState *thread_cpu;
G_NORETURN void cpu_loop(CPUArchState *env);
abi_long get_errno(abi_long ret);
const char *target_strerror(int err);
int get_osversion(void);
void init_qemu_uname_release(void);
void fork_start(void);
void fork_end(int child);
/**
* probe_guest_base:
* @image_name: the executable being loaded
* @loaddr: the lowest fixed address in the executable
* @hiaddr: the highest fixed address in the executable
*
* Creates the initial guest address space in the host memory space.
*
* If @loaddr == 0, then no address in the executable is fixed,
* i.e. it is fully relocatable. In that case @hiaddr is the size
* of the executable.
*
* This function will not return if a valid value for guest_base
* cannot be chosen. On return, the executable loader can expect
*
* target_mmap(loaddr, hiaddr - loaddr, ...)
*
* to succeed.
*/
void probe_guest_base(const char *image_name,
abi_ulong loaddr, abi_ulong hiaddr);
/* syscall.c */
int host_to_target_waitstatus(int status);
#ifdef TARGET_I386
/* vm86.c */
void save_v86_state(CPUX86State *env);
void handle_vm86_trap(CPUX86State *env, int trapno);
void handle_vm86_fault(CPUX86State *env);
int do_vm86(CPUX86State *env, long subfunction, abi_ulong v86_addr);
#elif defined(TARGET_SPARC64)
void sparc64_set_context(CPUSPARCState *env);
void sparc64_get_context(CPUSPARCState *env);
#endif
static inline int is_error(abi_long ret)
{
return (abi_ulong)ret >= (abi_ulong)(-4096);
}
linux-user: Fix syscall parameter handling for MIPS n32 The MIPS n32 ABI is basically n64 with the address space (i.e. pointer width) shrinked to 32 bits. Meanwhile the current code treats it as o32-like based on TARGET_ABI_BITS, which causes problems with n32 syscalls utilizing 64-bit offsets, like pread64, affecting most (if not all) recently built n32 binaries. This partially solves issue #909 ("qemu-mipsn32(el) user mode emulator fails to execute any recently built n32 binaries"); with this change applied, the built qemu-mipsn32el is able to progress beyond the pread64, and finish _dl_start_user for the "getting ld.so load libc.so" case. The program later dies with SIGBUS, though, due to _dl_start_user not maintaining stack alignment after removing ld.so itself from argv, and qemu-user starting to enforce alignment recently, but that is orthogonal to the issue here; the more common case of chrooting is working, verified with my own-built Gentoo n32 sysroot. (Depending on the exact ISA used, one may have to explicitly specify QEMU_CPU, which is the case for my chroot.) Buglink: https://gitlab.com/qemu-project/qemu/-/issues/909 Signed-off-by: WANG Xuerui <xen0n@gentoo.org> Cc: Laurent Vivier <laurent@vivier.eu> Cc: Philippe Mathieu-Daudé <f4bug@amsat.org> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: Andreas K. Hüttel <dilfridge@gentoo.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220320052259.1610883-1-xen0n@gentoo.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-03-20 08:22:59 +03:00
#if (TARGET_ABI_BITS == 32) && !defined(TARGET_ABI_MIPSN32)
static inline uint64_t target_offset64(uint32_t word0, uint32_t word1)
{
#if TARGET_BIG_ENDIAN
return ((uint64_t)word0 << 32) | word1;
#else
return ((uint64_t)word1 << 32) | word0;
#endif
}
linux-user: Fix syscall parameter handling for MIPS n32 The MIPS n32 ABI is basically n64 with the address space (i.e. pointer width) shrinked to 32 bits. Meanwhile the current code treats it as o32-like based on TARGET_ABI_BITS, which causes problems with n32 syscalls utilizing 64-bit offsets, like pread64, affecting most (if not all) recently built n32 binaries. This partially solves issue #909 ("qemu-mipsn32(el) user mode emulator fails to execute any recently built n32 binaries"); with this change applied, the built qemu-mipsn32el is able to progress beyond the pread64, and finish _dl_start_user for the "getting ld.so load libc.so" case. The program later dies with SIGBUS, though, due to _dl_start_user not maintaining stack alignment after removing ld.so itself from argv, and qemu-user starting to enforce alignment recently, but that is orthogonal to the issue here; the more common case of chrooting is working, verified with my own-built Gentoo n32 sysroot. (Depending on the exact ISA used, one may have to explicitly specify QEMU_CPU, which is the case for my chroot.) Buglink: https://gitlab.com/qemu-project/qemu/-/issues/909 Signed-off-by: WANG Xuerui <xen0n@gentoo.org> Cc: Laurent Vivier <laurent@vivier.eu> Cc: Philippe Mathieu-Daudé <f4bug@amsat.org> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: Andreas K. Hüttel <dilfridge@gentoo.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220320052259.1610883-1-xen0n@gentoo.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-03-20 08:22:59 +03:00
#else /* TARGET_ABI_BITS == 32 && !defined(TARGET_ABI_MIPSN32) */
static inline uint64_t target_offset64(uint64_t word0, uint64_t word1)
{
return word0;
}
#endif /* TARGET_ABI_BITS != 32 */
void print_termios(void *arg);
/* ARM EABI and MIPS expect 64bit types aligned even on pairs or registers */
#ifdef TARGET_ARM
static inline int regpairs_aligned(CPUArchState *cpu_env, int num)
{
return cpu_env->eabi;
}
linux-user: Fix syscall parameter handling for MIPS n32 The MIPS n32 ABI is basically n64 with the address space (i.e. pointer width) shrinked to 32 bits. Meanwhile the current code treats it as o32-like based on TARGET_ABI_BITS, which causes problems with n32 syscalls utilizing 64-bit offsets, like pread64, affecting most (if not all) recently built n32 binaries. This partially solves issue #909 ("qemu-mipsn32(el) user mode emulator fails to execute any recently built n32 binaries"); with this change applied, the built qemu-mipsn32el is able to progress beyond the pread64, and finish _dl_start_user for the "getting ld.so load libc.so" case. The program later dies with SIGBUS, though, due to _dl_start_user not maintaining stack alignment after removing ld.so itself from argv, and qemu-user starting to enforce alignment recently, but that is orthogonal to the issue here; the more common case of chrooting is working, verified with my own-built Gentoo n32 sysroot. (Depending on the exact ISA used, one may have to explicitly specify QEMU_CPU, which is the case for my chroot.) Buglink: https://gitlab.com/qemu-project/qemu/-/issues/909 Signed-off-by: WANG Xuerui <xen0n@gentoo.org> Cc: Laurent Vivier <laurent@vivier.eu> Cc: Philippe Mathieu-Daudé <f4bug@amsat.org> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: Andreas K. Hüttel <dilfridge@gentoo.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220320052259.1610883-1-xen0n@gentoo.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-03-20 08:22:59 +03:00
#elif defined(TARGET_MIPS) && defined(TARGET_ABI_MIPSO32)
static inline int regpairs_aligned(CPUArchState *cpu_env, int num) { return 1; }
#elif defined(TARGET_PPC) && !defined(TARGET_PPC64)
/*
* SysV AVI for PPC32 expects 64bit parameters to be passed on odd/even pairs
* of registers which translates to the same as ARM/MIPS, because we start with
* r3 as arg1
*/
static inline int regpairs_aligned(CPUArchState *cpu_env, int num) { return 1; }
#elif defined(TARGET_SH4)
/* SH4 doesn't align register pairs, except for p{read,write}64 */
static inline int regpairs_aligned(CPUArchState *cpu_env, int num)
{
switch (num) {
case TARGET_NR_pread64:
case TARGET_NR_pwrite64:
return 1;
default:
return 0;
}
}
#elif defined(TARGET_XTENSA)
static inline int regpairs_aligned(CPUArchState *cpu_env, int num) { return 1; }
#elif defined(TARGET_HEXAGON)
static inline int regpairs_aligned(CPUArchState *cpu_env, int num) { return 1; }
#else
static inline int regpairs_aligned(CPUArchState *cpu_env, int num) { return 0; }
#endif
/**
* preexit_cleanup: housekeeping before the guest exits
*
* env: the CPU state
* code: the exit code
*/
void preexit_cleanup(CPUArchState *env, int code);
/*
* Include target-specific struct and function definitions;
* they may need access to the target-independent structures
* above, so include them last.
*/
#include "target_cpu.h"
#include "target_structs.h"
#endif