block: Rename raw_bsd to raw-format.c
Given that we have raw-win32.c and raw-posix.c, my initial guess at
raw_bsd.c was that it was for dealing with raw files using code
specific to the BSD operating system (beyond what raw-posix could
do). Not so - this name was chosen back in commit e1c66c6 to
distinguish that it was a BSD licensed file, in contrast to the
then-existing raw.c with an unclear and potentially unusable
license. But since it has been more than three years since the
rewrite, it's time to pick a more useful name for this file to
avoid this type of confusion to future contributors that don't know
the backstory, as none of our other files are named solely by the
license they use.
In reality, this file deals with the raw format, which is useful
with any number of protocols, while raw-{win32,posix} deal with
the file protocol (and in turn, that protocol is not limited to
use with the raw format). So rename raw_bsd to raw-format.c. We
could have also used the shorter name raw.c, except that collides
with the earlier use of that filename for a different license,
and it's better to be safe than risk license pollution.
The next patch will also rename raw-win32.c and raw-posix.c to
further distinguish the difference in roles.
It doesn't hurt that this gets rid of an underscore in the filename,
thereby making tab-completion on 'ra<TAB>' easier (now I don't have
to type the shift key, which slows things down :)
Suggested-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-12-02 22:48:53 +03:00
|
|
|
/* BlockDriver implementation for "raw" format driver
|
add skeleton for BSD licensed "raw" BlockDriver
On 08/05/13 15:03, Paolo Bonzini wrote:
>
>
> ----- Original Message -----
>> From: "Laszlo Ersek" <lersek@redhat.com>
>> To: "Paolo Bonzini" <pbonzini@redhat.com>
>> Sent: Monday, August 5, 2013 2:43:46 PM
>> Subject: Re: [PATCH 1/2] raw: add license header
>>
>> On 08/02/13 00:27, Paolo Bonzini wrote:
>>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote:
>>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote:
>>>>> Most of the block layer is under the BSD license, thus it is
>>>>> reasonable to license block/raw.c the same way. CCed people should
>>>>> ACK by replying with a Signed-off-by line.
>>>>
>>>> The coded was intended to be GPLv2.
>>>
>>> Laszlo, would you be willing to do clean-room reverse engineering?
>>>
>>> (No rants, please. :))
>>
>> What's the scope exactly?
>
> It's quite small, it's a file full of forwarders like
>
> static void raw_foo(BlockDriverState *bs)
> {
> return bdrv_foo(bs->file);
> }
>
> It's 170 lines of code, all as boring as this. I only picked you
> because I'm quite certain you have never seen the file (and the answer
> confirmed it).
>
> Basically:
>
> 1) BlockDriver is a struct in which these function members are
> interesting:
>
> .bdrv_reopen_prepare
> .bdrv_co_readv
> .bdrv_co_writev
> .bdrv_co_is_allocated
> .bdrv_co_write_zeroes
> .bdrv_co_discard
> .bdrv_getlength
> .bdrv_get_info
> .bdrv_truncate
> .bdrv_is_inserted
> .bdrv_media_changed
> .bdrv_eject
> .bdrv_lock_medium
> .bdrv_ioctl
> .bdrv_aio_ioctl
> .bdrv_has_zero_init
>
> They should be implemented as simple forwarders (see above).
> There are 16 functions listed here, you can easily see how this
> already accounts for 100+ SLOC roughly...
>
> The implementations of bdrv_co_readv and bdrv_co_writev should also
> call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The
> events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO.
>
> 2) This is also a simple forwarder function:
>
> .bdrv_create
>
> but there is no BlockDriverState argument so the forwarded-to function
> does not have a bs->file argument either. The forwarded-to function
> is bdrv_create_file.
>
> 3) These members are special
>
> .format_name is the string "raw"
> .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0
> .bdrv_close raw_close should do nothing
> .bdrv_probe raw_probe should just return 1.
>
> 4) There is another member, .create_options, which is an array of
> QEMUOptionParameter structs, terminated by an all-zero item. The only
> option you need is for the virtual disk size. You will find something
> to copy from in other block drivers, for example block/qcow2.c.
>
> 5) Formats are registered with bdrv_register (takes a BlockDriver*).
> You also need to pass the caller of bdrv_register to block_init.
>
> 6) I'm not sure how to organize the patch series, so I'll leave this to
> your creativity. I guess in this case move/copy detection of git should
> be disabled. I would definitely include this spec in the commit
> message as a proof of clean-room reverse engineering.
>
> 7) Remember a BSD header like the one in block.c.
>
> Paolo
This patch implements the email up to the paragraph ending with "100+ SLOC
roughly". The skeleton is generated from the list there, with a simple
shell loop using "sed" and the raw_foo() template.
The BSD license block is copied (and reflowed) from
"util/qemu-progress.c".
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-21 14:41:17 +04:00
|
|
|
*
|
2016-06-24 01:37:22 +03:00
|
|
|
* Copyright (C) 2010-2016 Red Hat, Inc.
|
2013-08-21 14:41:21 +04:00
|
|
|
* Copyright (C) 2010, Blue Swirl <blauwirbel@gmail.com>
|
2013-08-21 14:41:22 +04:00
|
|
|
* Copyright (C) 2009, Anthony Liguori <aliguori@us.ibm.com>
|
add skeleton for BSD licensed "raw" BlockDriver
On 08/05/13 15:03, Paolo Bonzini wrote:
>
>
> ----- Original Message -----
>> From: "Laszlo Ersek" <lersek@redhat.com>
>> To: "Paolo Bonzini" <pbonzini@redhat.com>
>> Sent: Monday, August 5, 2013 2:43:46 PM
>> Subject: Re: [PATCH 1/2] raw: add license header
>>
>> On 08/02/13 00:27, Paolo Bonzini wrote:
>>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote:
>>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote:
>>>>> Most of the block layer is under the BSD license, thus it is
>>>>> reasonable to license block/raw.c the same way. CCed people should
>>>>> ACK by replying with a Signed-off-by line.
>>>>
>>>> The coded was intended to be GPLv2.
>>>
>>> Laszlo, would you be willing to do clean-room reverse engineering?
>>>
>>> (No rants, please. :))
>>
>> What's the scope exactly?
>
> It's quite small, it's a file full of forwarders like
>
> static void raw_foo(BlockDriverState *bs)
> {
> return bdrv_foo(bs->file);
> }
>
> It's 170 lines of code, all as boring as this. I only picked you
> because I'm quite certain you have never seen the file (and the answer
> confirmed it).
>
> Basically:
>
> 1) BlockDriver is a struct in which these function members are
> interesting:
>
> .bdrv_reopen_prepare
> .bdrv_co_readv
> .bdrv_co_writev
> .bdrv_co_is_allocated
> .bdrv_co_write_zeroes
> .bdrv_co_discard
> .bdrv_getlength
> .bdrv_get_info
> .bdrv_truncate
> .bdrv_is_inserted
> .bdrv_media_changed
> .bdrv_eject
> .bdrv_lock_medium
> .bdrv_ioctl
> .bdrv_aio_ioctl
> .bdrv_has_zero_init
>
> They should be implemented as simple forwarders (see above).
> There are 16 functions listed here, you can easily see how this
> already accounts for 100+ SLOC roughly...
>
> The implementations of bdrv_co_readv and bdrv_co_writev should also
> call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The
> events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO.
>
> 2) This is also a simple forwarder function:
>
> .bdrv_create
>
> but there is no BlockDriverState argument so the forwarded-to function
> does not have a bs->file argument either. The forwarded-to function
> is bdrv_create_file.
>
> 3) These members are special
>
> .format_name is the string "raw"
> .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0
> .bdrv_close raw_close should do nothing
> .bdrv_probe raw_probe should just return 1.
>
> 4) There is another member, .create_options, which is an array of
> QEMUOptionParameter structs, terminated by an all-zero item. The only
> option you need is for the virtual disk size. You will find something
> to copy from in other block drivers, for example block/qcow2.c.
>
> 5) Formats are registered with bdrv_register (takes a BlockDriver*).
> You also need to pass the caller of bdrv_register to block_init.
>
> 6) I'm not sure how to organize the patch series, so I'll leave this to
> your creativity. I guess in this case move/copy detection of git should
> be disabled. I would definitely include this spec in the commit
> message as a proof of clean-room reverse engineering.
>
> 7) Remember a BSD header like the one in block.c.
>
> Paolo
This patch implements the email up to the paragraph ending with "100+ SLOC
roughly". The skeleton is generated from the list there, with a simple
shell loop using "sed" and the raw_foo() template.
The BSD license block is copied (and reflowed) from
"util/qemu-progress.c".
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-21 14:41:17 +04:00
|
|
|
*
|
|
|
|
* Author:
|
|
|
|
* Laszlo Ersek <lersek@redhat.com>
|
|
|
|
*
|
|
|
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
|
|
|
* of this software and associated documentation files (the "Software"), to
|
|
|
|
* deal in the Software without restriction, including without limitation the
|
|
|
|
* rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
|
|
|
|
* sell copies of the Software, and to permit persons to whom the Software is
|
|
|
|
* furnished to do so, subject to the following conditions:
|
|
|
|
*
|
|
|
|
* The above copyright notice and this permission notice shall be included in
|
|
|
|
* all copies or substantial portions of the Software.
|
|
|
|
*
|
|
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
|
|
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
|
|
|
|
* IN THE SOFTWARE.
|
|
|
|
*/
|
|
|
|
|
2016-01-18 21:01:42 +03:00
|
|
|
#include "qemu/osdep.h"
|
add skeleton for BSD licensed "raw" BlockDriver
On 08/05/13 15:03, Paolo Bonzini wrote:
>
>
> ----- Original Message -----
>> From: "Laszlo Ersek" <lersek@redhat.com>
>> To: "Paolo Bonzini" <pbonzini@redhat.com>
>> Sent: Monday, August 5, 2013 2:43:46 PM
>> Subject: Re: [PATCH 1/2] raw: add license header
>>
>> On 08/02/13 00:27, Paolo Bonzini wrote:
>>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote:
>>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote:
>>>>> Most of the block layer is under the BSD license, thus it is
>>>>> reasonable to license block/raw.c the same way. CCed people should
>>>>> ACK by replying with a Signed-off-by line.
>>>>
>>>> The coded was intended to be GPLv2.
>>>
>>> Laszlo, would you be willing to do clean-room reverse engineering?
>>>
>>> (No rants, please. :))
>>
>> What's the scope exactly?
>
> It's quite small, it's a file full of forwarders like
>
> static void raw_foo(BlockDriverState *bs)
> {
> return bdrv_foo(bs->file);
> }
>
> It's 170 lines of code, all as boring as this. I only picked you
> because I'm quite certain you have never seen the file (and the answer
> confirmed it).
>
> Basically:
>
> 1) BlockDriver is a struct in which these function members are
> interesting:
>
> .bdrv_reopen_prepare
> .bdrv_co_readv
> .bdrv_co_writev
> .bdrv_co_is_allocated
> .bdrv_co_write_zeroes
> .bdrv_co_discard
> .bdrv_getlength
> .bdrv_get_info
> .bdrv_truncate
> .bdrv_is_inserted
> .bdrv_media_changed
> .bdrv_eject
> .bdrv_lock_medium
> .bdrv_ioctl
> .bdrv_aio_ioctl
> .bdrv_has_zero_init
>
> They should be implemented as simple forwarders (see above).
> There are 16 functions listed here, you can easily see how this
> already accounts for 100+ SLOC roughly...
>
> The implementations of bdrv_co_readv and bdrv_co_writev should also
> call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The
> events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO.
>
> 2) This is also a simple forwarder function:
>
> .bdrv_create
>
> but there is no BlockDriverState argument so the forwarded-to function
> does not have a bs->file argument either. The forwarded-to function
> is bdrv_create_file.
>
> 3) These members are special
>
> .format_name is the string "raw"
> .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0
> .bdrv_close raw_close should do nothing
> .bdrv_probe raw_probe should just return 1.
>
> 4) There is another member, .create_options, which is an array of
> QEMUOptionParameter structs, terminated by an all-zero item. The only
> option you need is for the virtual disk size. You will find something
> to copy from in other block drivers, for example block/qcow2.c.
>
> 5) Formats are registered with bdrv_register (takes a BlockDriver*).
> You also need to pass the caller of bdrv_register to block_init.
>
> 6) I'm not sure how to organize the patch series, so I'll leave this to
> your creativity. I guess in this case move/copy detection of git should
> be disabled. I would definitely include this spec in the commit
> message as a proof of clean-room reverse engineering.
>
> 7) Remember a BSD header like the one in block.c.
>
> Paolo
This patch implements the email up to the paragraph ending with "100+ SLOC
roughly". The skeleton is generated from the list there, with a simple
shell loop using "sed" and the raw_foo() template.
The BSD license block is copied (and reflowed) from
"util/qemu-progress.c".
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-21 14:41:17 +04:00
|
|
|
#include "block/block_int.h"
|
include/qemu/osdep.h: Don't include qapi/error.h
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef. Since then, we've moved to include qemu/osdep.h
everywhere. Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h. That's in excess of
100KiB of crap most .c files don't actually need.
Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h. Include qapi/error.h in .c files that need it and don't
get it now. Include qapi-types.h in qom/object.h for uint16List.
Update scripts/clean-includes accordingly. Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h
comment quoted above similarly.
This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third. Unfortunately, the number depending on
qapi-types.h shrinks only a little. More work is needed for that one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-14 11:01:28 +03:00
|
|
|
#include "qapi/error.h"
|
2019-05-23 17:35:07 +03:00
|
|
|
#include "qemu/module.h"
|
2013-08-21 14:41:21 +04:00
|
|
|
#include "qemu/option.h"
|
|
|
|
|
2016-10-31 13:27:40 +03:00
|
|
|
typedef struct BDRVRawState {
|
|
|
|
uint64_t offset;
|
|
|
|
uint64_t size;
|
|
|
|
bool has_size;
|
|
|
|
} BDRVRawState;
|
|
|
|
|
2019-03-12 19:48:48 +03:00
|
|
|
static const char *const mutable_opts[] = { "offset", "size", NULL };
|
|
|
|
|
2016-10-31 13:27:40 +03:00
|
|
|
static QemuOptsList raw_runtime_opts = {
|
|
|
|
.name = "raw",
|
|
|
|
.head = QTAILQ_HEAD_INITIALIZER(raw_runtime_opts.head),
|
|
|
|
.desc = {
|
|
|
|
{
|
|
|
|
.name = "offset",
|
|
|
|
.type = QEMU_OPT_SIZE,
|
|
|
|
.help = "offset in the disk where the image starts",
|
|
|
|
},
|
|
|
|
{
|
|
|
|
.name = "size",
|
|
|
|
.type = QEMU_OPT_SIZE,
|
|
|
|
.help = "virtual disk size",
|
|
|
|
},
|
|
|
|
{ /* end of list */ }
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
2014-06-05 13:21:03 +04:00
|
|
|
static QemuOptsList raw_create_opts = {
|
|
|
|
.name = "raw-create-opts",
|
|
|
|
.head = QTAILQ_HEAD_INITIALIZER(raw_create_opts.head),
|
|
|
|
.desc = {
|
|
|
|
{
|
|
|
|
.name = BLOCK_OPT_SIZE,
|
|
|
|
.type = QEMU_OPT_SIZE,
|
|
|
|
.help = "Virtual disk size"
|
|
|
|
},
|
|
|
|
{ /* end of list */ }
|
|
|
|
}
|
2013-08-21 14:41:21 +04:00
|
|
|
};
|
add skeleton for BSD licensed "raw" BlockDriver
On 08/05/13 15:03, Paolo Bonzini wrote:
>
>
> ----- Original Message -----
>> From: "Laszlo Ersek" <lersek@redhat.com>
>> To: "Paolo Bonzini" <pbonzini@redhat.com>
>> Sent: Monday, August 5, 2013 2:43:46 PM
>> Subject: Re: [PATCH 1/2] raw: add license header
>>
>> On 08/02/13 00:27, Paolo Bonzini wrote:
>>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote:
>>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote:
>>>>> Most of the block layer is under the BSD license, thus it is
>>>>> reasonable to license block/raw.c the same way. CCed people should
>>>>> ACK by replying with a Signed-off-by line.
>>>>
>>>> The coded was intended to be GPLv2.
>>>
>>> Laszlo, would you be willing to do clean-room reverse engineering?
>>>
>>> (No rants, please. :))
>>
>> What's the scope exactly?
>
> It's quite small, it's a file full of forwarders like
>
> static void raw_foo(BlockDriverState *bs)
> {
> return bdrv_foo(bs->file);
> }
>
> It's 170 lines of code, all as boring as this. I only picked you
> because I'm quite certain you have never seen the file (and the answer
> confirmed it).
>
> Basically:
>
> 1) BlockDriver is a struct in which these function members are
> interesting:
>
> .bdrv_reopen_prepare
> .bdrv_co_readv
> .bdrv_co_writev
> .bdrv_co_is_allocated
> .bdrv_co_write_zeroes
> .bdrv_co_discard
> .bdrv_getlength
> .bdrv_get_info
> .bdrv_truncate
> .bdrv_is_inserted
> .bdrv_media_changed
> .bdrv_eject
> .bdrv_lock_medium
> .bdrv_ioctl
> .bdrv_aio_ioctl
> .bdrv_has_zero_init
>
> They should be implemented as simple forwarders (see above).
> There are 16 functions listed here, you can easily see how this
> already accounts for 100+ SLOC roughly...
>
> The implementations of bdrv_co_readv and bdrv_co_writev should also
> call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The
> events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO.
>
> 2) This is also a simple forwarder function:
>
> .bdrv_create
>
> but there is no BlockDriverState argument so the forwarded-to function
> does not have a bs->file argument either. The forwarded-to function
> is bdrv_create_file.
>
> 3) These members are special
>
> .format_name is the string "raw"
> .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0
> .bdrv_close raw_close should do nothing
> .bdrv_probe raw_probe should just return 1.
>
> 4) There is another member, .create_options, which is an array of
> QEMUOptionParameter structs, terminated by an all-zero item. The only
> option you need is for the virtual disk size. You will find something
> to copy from in other block drivers, for example block/qcow2.c.
>
> 5) Formats are registered with bdrv_register (takes a BlockDriver*).
> You also need to pass the caller of bdrv_register to block_init.
>
> 6) I'm not sure how to organize the patch series, so I'll leave this to
> your creativity. I guess in this case move/copy detection of git should
> be disabled. I would definitely include this spec in the commit
> message as a proof of clean-room reverse engineering.
>
> 7) Remember a BSD header like the one in block.c.
>
> Paolo
This patch implements the email up to the paragraph ending with "100+ SLOC
roughly". The skeleton is generated from the list there, with a simple
shell loop using "sed" and the raw_foo() template.
The BSD license block is copied (and reflowed) from
"util/qemu-progress.c".
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-21 14:41:17 +04:00
|
|
|
|
2020-05-13 14:05:30 +03:00
|
|
|
static int raw_read_options(QDict *options, uint64_t *offset, bool *has_size,
|
|
|
|
uint64_t *size, Error **errp)
|
2016-10-31 13:27:40 +03:00
|
|
|
{
|
|
|
|
QemuOpts *opts = NULL;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
opts = qemu_opts_create(&raw_runtime_opts, NULL, 0, &error_abort);
|
2020-07-07 19:06:03 +03:00
|
|
|
if (!qemu_opts_absorb_qdict(opts, options, errp)) {
|
2016-10-31 13:27:40 +03:00
|
|
|
ret = -EINVAL;
|
|
|
|
goto end;
|
|
|
|
}
|
|
|
|
|
2020-05-13 14:05:30 +03:00
|
|
|
*offset = qemu_opt_get_size(opts, "offset", 0);
|
|
|
|
*has_size = qemu_opt_find(opts, "size");
|
|
|
|
*size = qemu_opt_get_size(opts, "size", 0);
|
2016-11-03 16:47:48 +03:00
|
|
|
|
2020-05-13 14:05:30 +03:00
|
|
|
ret = 0;
|
|
|
|
end:
|
|
|
|
qemu_opts_del(opts);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int raw_apply_options(BlockDriverState *bs, BDRVRawState *s,
|
|
|
|
uint64_t offset, bool has_size, uint64_t size,
|
|
|
|
Error **errp)
|
|
|
|
{
|
|
|
|
int64_t real_size = 0;
|
|
|
|
|
|
|
|
real_size = bdrv_getlength(bs->file->bs);
|
|
|
|
if (real_size < 0) {
|
|
|
|
error_setg_errno(errp, -real_size, "Could not get image size");
|
|
|
|
return real_size;
|
2016-10-31 13:27:40 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
/* Check size and offset */
|
2020-05-13 14:05:30 +03:00
|
|
|
if (offset > real_size) {
|
|
|
|
error_setg(errp, "Offset (%" PRIu64 ") cannot be greater than "
|
|
|
|
"size of the containing file (%" PRId64 ")",
|
|
|
|
s->offset, real_size);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (has_size && (real_size - offset) < size) {
|
2016-10-31 13:27:40 +03:00
|
|
|
error_setg(errp, "The sum of offset (%" PRIu64 ") and size "
|
2020-05-13 14:05:30 +03:00
|
|
|
"(%" PRIu64 ") has to be smaller or equal to the "
|
|
|
|
" actual size of the containing file (%" PRId64 ")",
|
|
|
|
s->offset, s->size, real_size);
|
|
|
|
return -EINVAL;
|
2016-10-31 13:27:40 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
/* Make sure size is multiple of BDRV_SECTOR_SIZE to prevent rounding
|
|
|
|
* up and leaking out of the specified area. */
|
2020-05-13 14:05:30 +03:00
|
|
|
if (has_size && !QEMU_IS_ALIGNED(size, BDRV_SECTOR_SIZE)) {
|
2016-10-31 13:27:40 +03:00
|
|
|
error_setg(errp, "Specified size is not multiple of %llu",
|
2020-05-13 14:05:30 +03:00
|
|
|
BDRV_SECTOR_SIZE);
|
|
|
|
return -EINVAL;
|
2016-10-31 13:27:40 +03:00
|
|
|
}
|
|
|
|
|
2020-05-13 14:05:30 +03:00
|
|
|
s->offset = offset;
|
|
|
|
s->has_size = has_size;
|
|
|
|
s->size = has_size ? size : real_size - offset;
|
2016-10-31 13:27:40 +03:00
|
|
|
|
2020-05-13 14:05:30 +03:00
|
|
|
return 0;
|
2016-10-31 13:27:40 +03:00
|
|
|
}
|
|
|
|
|
2013-08-21 14:41:23 +04:00
|
|
|
static int raw_reopen_prepare(BDRVReopenState *reopen_state,
|
|
|
|
BlockReopenQueue *queue, Error **errp)
|
add skeleton for BSD licensed "raw" BlockDriver
On 08/05/13 15:03, Paolo Bonzini wrote:
>
>
> ----- Original Message -----
>> From: "Laszlo Ersek" <lersek@redhat.com>
>> To: "Paolo Bonzini" <pbonzini@redhat.com>
>> Sent: Monday, August 5, 2013 2:43:46 PM
>> Subject: Re: [PATCH 1/2] raw: add license header
>>
>> On 08/02/13 00:27, Paolo Bonzini wrote:
>>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote:
>>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote:
>>>>> Most of the block layer is under the BSD license, thus it is
>>>>> reasonable to license block/raw.c the same way. CCed people should
>>>>> ACK by replying with a Signed-off-by line.
>>>>
>>>> The coded was intended to be GPLv2.
>>>
>>> Laszlo, would you be willing to do clean-room reverse engineering?
>>>
>>> (No rants, please. :))
>>
>> What's the scope exactly?
>
> It's quite small, it's a file full of forwarders like
>
> static void raw_foo(BlockDriverState *bs)
> {
> return bdrv_foo(bs->file);
> }
>
> It's 170 lines of code, all as boring as this. I only picked you
> because I'm quite certain you have never seen the file (and the answer
> confirmed it).
>
> Basically:
>
> 1) BlockDriver is a struct in which these function members are
> interesting:
>
> .bdrv_reopen_prepare
> .bdrv_co_readv
> .bdrv_co_writev
> .bdrv_co_is_allocated
> .bdrv_co_write_zeroes
> .bdrv_co_discard
> .bdrv_getlength
> .bdrv_get_info
> .bdrv_truncate
> .bdrv_is_inserted
> .bdrv_media_changed
> .bdrv_eject
> .bdrv_lock_medium
> .bdrv_ioctl
> .bdrv_aio_ioctl
> .bdrv_has_zero_init
>
> They should be implemented as simple forwarders (see above).
> There are 16 functions listed here, you can easily see how this
> already accounts for 100+ SLOC roughly...
>
> The implementations of bdrv_co_readv and bdrv_co_writev should also
> call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The
> events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO.
>
> 2) This is also a simple forwarder function:
>
> .bdrv_create
>
> but there is no BlockDriverState argument so the forwarded-to function
> does not have a bs->file argument either. The forwarded-to function
> is bdrv_create_file.
>
> 3) These members are special
>
> .format_name is the string "raw"
> .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0
> .bdrv_close raw_close should do nothing
> .bdrv_probe raw_probe should just return 1.
>
> 4) There is another member, .create_options, which is an array of
> QEMUOptionParameter structs, terminated by an all-zero item. The only
> option you need is for the virtual disk size. You will find something
> to copy from in other block drivers, for example block/qcow2.c.
>
> 5) Formats are registered with bdrv_register (takes a BlockDriver*).
> You also need to pass the caller of bdrv_register to block_init.
>
> 6) I'm not sure how to organize the patch series, so I'll leave this to
> your creativity. I guess in this case move/copy detection of git should
> be disabled. I would definitely include this spec in the commit
> message as a proof of clean-room reverse engineering.
>
> 7) Remember a BSD header like the one in block.c.
>
> Paolo
This patch implements the email up to the paragraph ending with "100+ SLOC
roughly". The skeleton is generated from the list there, with a simple
shell loop using "sed" and the raw_foo() template.
The BSD license block is copied (and reflowed) from
"util/qemu-progress.c".
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-21 14:41:17 +04:00
|
|
|
{
|
2020-05-13 14:05:30 +03:00
|
|
|
bool has_size;
|
|
|
|
uint64_t offset, size;
|
|
|
|
int ret;
|
|
|
|
|
2016-10-31 13:27:40 +03:00
|
|
|
assert(reopen_state != NULL);
|
|
|
|
assert(reopen_state->bs != NULL);
|
|
|
|
|
|
|
|
reopen_state->opaque = g_new0(BDRVRawState, 1);
|
|
|
|
|
2020-05-13 14:05:30 +03:00
|
|
|
ret = raw_read_options(reopen_state->options, &offset, &has_size, &size,
|
|
|
|
errp);
|
|
|
|
if (ret < 0) {
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = raw_apply_options(reopen_state->bs, reopen_state->opaque,
|
|
|
|
offset, has_size, size, errp);
|
|
|
|
if (ret < 0) {
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
2016-10-31 13:27:40 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
static void raw_reopen_commit(BDRVReopenState *state)
|
|
|
|
{
|
|
|
|
BDRVRawState *new_s = state->opaque;
|
|
|
|
BDRVRawState *s = state->bs->opaque;
|
|
|
|
|
|
|
|
memcpy(s, new_s, sizeof(BDRVRawState));
|
|
|
|
|
|
|
|
g_free(state->opaque);
|
|
|
|
state->opaque = NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void raw_reopen_abort(BDRVReopenState *state)
|
|
|
|
{
|
|
|
|
g_free(state->opaque);
|
|
|
|
state->opaque = NULL;
|
add skeleton for BSD licensed "raw" BlockDriver
On 08/05/13 15:03, Paolo Bonzini wrote:
>
>
> ----- Original Message -----
>> From: "Laszlo Ersek" <lersek@redhat.com>
>> To: "Paolo Bonzini" <pbonzini@redhat.com>
>> Sent: Monday, August 5, 2013 2:43:46 PM
>> Subject: Re: [PATCH 1/2] raw: add license header
>>
>> On 08/02/13 00:27, Paolo Bonzini wrote:
>>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote:
>>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote:
>>>>> Most of the block layer is under the BSD license, thus it is
>>>>> reasonable to license block/raw.c the same way. CCed people should
>>>>> ACK by replying with a Signed-off-by line.
>>>>
>>>> The coded was intended to be GPLv2.
>>>
>>> Laszlo, would you be willing to do clean-room reverse engineering?
>>>
>>> (No rants, please. :))
>>
>> What's the scope exactly?
>
> It's quite small, it's a file full of forwarders like
>
> static void raw_foo(BlockDriverState *bs)
> {
> return bdrv_foo(bs->file);
> }
>
> It's 170 lines of code, all as boring as this. I only picked you
> because I'm quite certain you have never seen the file (and the answer
> confirmed it).
>
> Basically:
>
> 1) BlockDriver is a struct in which these function members are
> interesting:
>
> .bdrv_reopen_prepare
> .bdrv_co_readv
> .bdrv_co_writev
> .bdrv_co_is_allocated
> .bdrv_co_write_zeroes
> .bdrv_co_discard
> .bdrv_getlength
> .bdrv_get_info
> .bdrv_truncate
> .bdrv_is_inserted
> .bdrv_media_changed
> .bdrv_eject
> .bdrv_lock_medium
> .bdrv_ioctl
> .bdrv_aio_ioctl
> .bdrv_has_zero_init
>
> They should be implemented as simple forwarders (see above).
> There are 16 functions listed here, you can easily see how this
> already accounts for 100+ SLOC roughly...
>
> The implementations of bdrv_co_readv and bdrv_co_writev should also
> call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The
> events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO.
>
> 2) This is also a simple forwarder function:
>
> .bdrv_create
>
> but there is no BlockDriverState argument so the forwarded-to function
> does not have a bs->file argument either. The forwarded-to function
> is bdrv_create_file.
>
> 3) These members are special
>
> .format_name is the string "raw"
> .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0
> .bdrv_close raw_close should do nothing
> .bdrv_probe raw_probe should just return 1.
>
> 4) There is another member, .create_options, which is an array of
> QEMUOptionParameter structs, terminated by an all-zero item. The only
> option you need is for the virtual disk size. You will find something
> to copy from in other block drivers, for example block/qcow2.c.
>
> 5) Formats are registered with bdrv_register (takes a BlockDriver*).
> You also need to pass the caller of bdrv_register to block_init.
>
> 6) I'm not sure how to organize the patch series, so I'll leave this to
> your creativity. I guess in this case move/copy detection of git should
> be disabled. I would definitely include this spec in the commit
> message as a proof of clean-room reverse engineering.
>
> 7) Remember a BSD header like the one in block.c.
>
> Paolo
This patch implements the email up to the paragraph ending with "100+ SLOC
roughly". The skeleton is generated from the list there, with a simple
shell loop using "sed" and the raw_foo() template.
The BSD license block is copied (and reflowed) from
"util/qemu-progress.c".
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-21 14:41:17 +04:00
|
|
|
}
|
|
|
|
|
2018-06-01 12:26:40 +03:00
|
|
|
/* Check and adjust the offset, against 'offset' and 'size' options. */
|
|
|
|
static inline int raw_adjust_offset(BlockDriverState *bs, uint64_t *offset,
|
|
|
|
uint64_t bytes, bool is_write)
|
|
|
|
{
|
|
|
|
BDRVRawState *s = bs->opaque;
|
|
|
|
|
|
|
|
if (s->has_size && (*offset > s->size || bytes > (s->size - *offset))) {
|
|
|
|
/* There's not enough space for the write, or the read request is
|
|
|
|
* out-of-range. Don't read/write anything to prevent leaking out of
|
|
|
|
* the size specified in options. */
|
2018-07-02 05:58:36 +03:00
|
|
|
return is_write ? -ENOSPC : -EINVAL;
|
2018-06-01 12:26:40 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
if (*offset > INT64_MAX - s->offset) {
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
*offset += s->offset;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2016-07-16 02:23:08 +03:00
|
|
|
static int coroutine_fn raw_co_preadv(BlockDriverState *bs, uint64_t offset,
|
|
|
|
uint64_t bytes, QEMUIOVector *qiov,
|
|
|
|
int flags)
|
add skeleton for BSD licensed "raw" BlockDriver
On 08/05/13 15:03, Paolo Bonzini wrote:
>
>
> ----- Original Message -----
>> From: "Laszlo Ersek" <lersek@redhat.com>
>> To: "Paolo Bonzini" <pbonzini@redhat.com>
>> Sent: Monday, August 5, 2013 2:43:46 PM
>> Subject: Re: [PATCH 1/2] raw: add license header
>>
>> On 08/02/13 00:27, Paolo Bonzini wrote:
>>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote:
>>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote:
>>>>> Most of the block layer is under the BSD license, thus it is
>>>>> reasonable to license block/raw.c the same way. CCed people should
>>>>> ACK by replying with a Signed-off-by line.
>>>>
>>>> The coded was intended to be GPLv2.
>>>
>>> Laszlo, would you be willing to do clean-room reverse engineering?
>>>
>>> (No rants, please. :))
>>
>> What's the scope exactly?
>
> It's quite small, it's a file full of forwarders like
>
> static void raw_foo(BlockDriverState *bs)
> {
> return bdrv_foo(bs->file);
> }
>
> It's 170 lines of code, all as boring as this. I only picked you
> because I'm quite certain you have never seen the file (and the answer
> confirmed it).
>
> Basically:
>
> 1) BlockDriver is a struct in which these function members are
> interesting:
>
> .bdrv_reopen_prepare
> .bdrv_co_readv
> .bdrv_co_writev
> .bdrv_co_is_allocated
> .bdrv_co_write_zeroes
> .bdrv_co_discard
> .bdrv_getlength
> .bdrv_get_info
> .bdrv_truncate
> .bdrv_is_inserted
> .bdrv_media_changed
> .bdrv_eject
> .bdrv_lock_medium
> .bdrv_ioctl
> .bdrv_aio_ioctl
> .bdrv_has_zero_init
>
> They should be implemented as simple forwarders (see above).
> There are 16 functions listed here, you can easily see how this
> already accounts for 100+ SLOC roughly...
>
> The implementations of bdrv_co_readv and bdrv_co_writev should also
> call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The
> events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO.
>
> 2) This is also a simple forwarder function:
>
> .bdrv_create
>
> but there is no BlockDriverState argument so the forwarded-to function
> does not have a bs->file argument either. The forwarded-to function
> is bdrv_create_file.
>
> 3) These members are special
>
> .format_name is the string "raw"
> .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0
> .bdrv_close raw_close should do nothing
> .bdrv_probe raw_probe should just return 1.
>
> 4) There is another member, .create_options, which is an array of
> QEMUOptionParameter structs, terminated by an all-zero item. The only
> option you need is for the virtual disk size. You will find something
> to copy from in other block drivers, for example block/qcow2.c.
>
> 5) Formats are registered with bdrv_register (takes a BlockDriver*).
> You also need to pass the caller of bdrv_register to block_init.
>
> 6) I'm not sure how to organize the patch series, so I'll leave this to
> your creativity. I guess in this case move/copy detection of git should
> be disabled. I would definitely include this spec in the commit
> message as a proof of clean-room reverse engineering.
>
> 7) Remember a BSD header like the one in block.c.
>
> Paolo
This patch implements the email up to the paragraph ending with "100+ SLOC
roughly". The skeleton is generated from the list there, with a simple
shell loop using "sed" and the raw_foo() template.
The BSD license block is copied (and reflowed) from
"util/qemu-progress.c".
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-21 14:41:17 +04:00
|
|
|
{
|
2018-06-01 12:26:40 +03:00
|
|
|
int ret;
|
2016-10-31 13:27:40 +03:00
|
|
|
|
2018-06-01 12:26:40 +03:00
|
|
|
ret = raw_adjust_offset(bs, &offset, bytes, false);
|
|
|
|
if (ret) {
|
|
|
|
return ret;
|
2016-10-31 13:27:40 +03:00
|
|
|
}
|
|
|
|
|
2013-08-21 14:41:18 +04:00
|
|
|
BLKDBG_EVENT(bs->file, BLKDBG_READ_AIO);
|
2016-07-16 02:23:08 +03:00
|
|
|
return bdrv_co_preadv(bs->file, offset, bytes, qiov, flags);
|
add skeleton for BSD licensed "raw" BlockDriver
On 08/05/13 15:03, Paolo Bonzini wrote:
>
>
> ----- Original Message -----
>> From: "Laszlo Ersek" <lersek@redhat.com>
>> To: "Paolo Bonzini" <pbonzini@redhat.com>
>> Sent: Monday, August 5, 2013 2:43:46 PM
>> Subject: Re: [PATCH 1/2] raw: add license header
>>
>> On 08/02/13 00:27, Paolo Bonzini wrote:
>>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote:
>>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote:
>>>>> Most of the block layer is under the BSD license, thus it is
>>>>> reasonable to license block/raw.c the same way. CCed people should
>>>>> ACK by replying with a Signed-off-by line.
>>>>
>>>> The coded was intended to be GPLv2.
>>>
>>> Laszlo, would you be willing to do clean-room reverse engineering?
>>>
>>> (No rants, please. :))
>>
>> What's the scope exactly?
>
> It's quite small, it's a file full of forwarders like
>
> static void raw_foo(BlockDriverState *bs)
> {
> return bdrv_foo(bs->file);
> }
>
> It's 170 lines of code, all as boring as this. I only picked you
> because I'm quite certain you have never seen the file (and the answer
> confirmed it).
>
> Basically:
>
> 1) BlockDriver is a struct in which these function members are
> interesting:
>
> .bdrv_reopen_prepare
> .bdrv_co_readv
> .bdrv_co_writev
> .bdrv_co_is_allocated
> .bdrv_co_write_zeroes
> .bdrv_co_discard
> .bdrv_getlength
> .bdrv_get_info
> .bdrv_truncate
> .bdrv_is_inserted
> .bdrv_media_changed
> .bdrv_eject
> .bdrv_lock_medium
> .bdrv_ioctl
> .bdrv_aio_ioctl
> .bdrv_has_zero_init
>
> They should be implemented as simple forwarders (see above).
> There are 16 functions listed here, you can easily see how this
> already accounts for 100+ SLOC roughly...
>
> The implementations of bdrv_co_readv and bdrv_co_writev should also
> call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The
> events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO.
>
> 2) This is also a simple forwarder function:
>
> .bdrv_create
>
> but there is no BlockDriverState argument so the forwarded-to function
> does not have a bs->file argument either. The forwarded-to function
> is bdrv_create_file.
>
> 3) These members are special
>
> .format_name is the string "raw"
> .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0
> .bdrv_close raw_close should do nothing
> .bdrv_probe raw_probe should just return 1.
>
> 4) There is another member, .create_options, which is an array of
> QEMUOptionParameter structs, terminated by an all-zero item. The only
> option you need is for the virtual disk size. You will find something
> to copy from in other block drivers, for example block/qcow2.c.
>
> 5) Formats are registered with bdrv_register (takes a BlockDriver*).
> You also need to pass the caller of bdrv_register to block_init.
>
> 6) I'm not sure how to organize the patch series, so I'll leave this to
> your creativity. I guess in this case move/copy detection of git should
> be disabled. I would definitely include this spec in the commit
> message as a proof of clean-room reverse engineering.
>
> 7) Remember a BSD header like the one in block.c.
>
> Paolo
This patch implements the email up to the paragraph ending with "100+ SLOC
roughly". The skeleton is generated from the list there, with a simple
shell loop using "sed" and the raw_foo() template.
The BSD license block is copied (and reflowed) from
"util/qemu-progress.c".
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-21 14:41:17 +04:00
|
|
|
}
|
|
|
|
|
2016-07-16 02:23:08 +03:00
|
|
|
static int coroutine_fn raw_co_pwritev(BlockDriverState *bs, uint64_t offset,
|
|
|
|
uint64_t bytes, QEMUIOVector *qiov,
|
|
|
|
int flags)
|
add skeleton for BSD licensed "raw" BlockDriver
On 08/05/13 15:03, Paolo Bonzini wrote:
>
>
> ----- Original Message -----
>> From: "Laszlo Ersek" <lersek@redhat.com>
>> To: "Paolo Bonzini" <pbonzini@redhat.com>
>> Sent: Monday, August 5, 2013 2:43:46 PM
>> Subject: Re: [PATCH 1/2] raw: add license header
>>
>> On 08/02/13 00:27, Paolo Bonzini wrote:
>>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote:
>>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote:
>>>>> Most of the block layer is under the BSD license, thus it is
>>>>> reasonable to license block/raw.c the same way. CCed people should
>>>>> ACK by replying with a Signed-off-by line.
>>>>
>>>> The coded was intended to be GPLv2.
>>>
>>> Laszlo, would you be willing to do clean-room reverse engineering?
>>>
>>> (No rants, please. :))
>>
>> What's the scope exactly?
>
> It's quite small, it's a file full of forwarders like
>
> static void raw_foo(BlockDriverState *bs)
> {
> return bdrv_foo(bs->file);
> }
>
> It's 170 lines of code, all as boring as this. I only picked you
> because I'm quite certain you have never seen the file (and the answer
> confirmed it).
>
> Basically:
>
> 1) BlockDriver is a struct in which these function members are
> interesting:
>
> .bdrv_reopen_prepare
> .bdrv_co_readv
> .bdrv_co_writev
> .bdrv_co_is_allocated
> .bdrv_co_write_zeroes
> .bdrv_co_discard
> .bdrv_getlength
> .bdrv_get_info
> .bdrv_truncate
> .bdrv_is_inserted
> .bdrv_media_changed
> .bdrv_eject
> .bdrv_lock_medium
> .bdrv_ioctl
> .bdrv_aio_ioctl
> .bdrv_has_zero_init
>
> They should be implemented as simple forwarders (see above).
> There are 16 functions listed here, you can easily see how this
> already accounts for 100+ SLOC roughly...
>
> The implementations of bdrv_co_readv and bdrv_co_writev should also
> call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The
> events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO.
>
> 2) This is also a simple forwarder function:
>
> .bdrv_create
>
> but there is no BlockDriverState argument so the forwarded-to function
> does not have a bs->file argument either. The forwarded-to function
> is bdrv_create_file.
>
> 3) These members are special
>
> .format_name is the string "raw"
> .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0
> .bdrv_close raw_close should do nothing
> .bdrv_probe raw_probe should just return 1.
>
> 4) There is another member, .create_options, which is an array of
> QEMUOptionParameter structs, terminated by an all-zero item. The only
> option you need is for the virtual disk size. You will find something
> to copy from in other block drivers, for example block/qcow2.c.
>
> 5) Formats are registered with bdrv_register (takes a BlockDriver*).
> You also need to pass the caller of bdrv_register to block_init.
>
> 6) I'm not sure how to organize the patch series, so I'll leave this to
> your creativity. I guess in this case move/copy detection of git should
> be disabled. I would definitely include this spec in the commit
> message as a proof of clean-room reverse engineering.
>
> 7) Remember a BSD header like the one in block.c.
>
> Paolo
This patch implements the email up to the paragraph ending with "100+ SLOC
roughly". The skeleton is generated from the list there, with a simple
shell loop using "sed" and the raw_foo() template.
The BSD license block is copied (and reflowed) from
"util/qemu-progress.c".
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-21 14:41:17 +04:00
|
|
|
{
|
raw: Prohibit dangerous writes for probed images
If the user neglects to specify the image format, QEMU probes the
image to guess it automatically, for convenience.
Relying on format probing is insecure for raw images (CVE-2008-2004).
If the guest writes a suitable header to the device, the next probe
will recognize a format chosen by the guest. A malicious guest can
abuse this to gain access to host files, e.g. by crafting a QCOW2
header with backing file /etc/shadow.
Commit 1e72d3b (April 2008) provided -drive parameter format to let
users disable probing. Commit f965509 (March 2009) extended QCOW2 to
optionally store the backing file format, to let users disable backing
file probing. QED has had a flag to suppress probing since the
beginning (2010), set whenever a raw backing file is assigned.
All of these additions that allow to avoid format probing have to be
specified explicitly. The default still allows the attack.
In order to fix this, commit 79368c8 (July 2010) put probed raw images
in a restricted mode, in which they wouldn't be able to overwrite the
first few bytes of the image so that they would identify as a different
image. If a write to the first sector would write one of the signatures
of another driver, qemu would instead zero out the first four bytes.
This patch was later reverted in commit 8b33d9e (September 2010) because
it didn't get the handling of unaligned qiov members right.
Today's block layer that is based on coroutines and has qiov utility
functions makes it much easier to get this functionality right, so this
patch implements it.
The other differences of this patch to the old one are that it doesn't
silently write something different than the guest requested by zeroing
out some bytes (it fails the request instead) and that it doesn't
maintain a list of signatures in the raw driver (it calls the usual
probe function instead).
Note that this change doesn't introduce new breakage for false positive
cases where the guest legitimately writes data into the first sector
that matches the signatures of an image format (e.g. for nested virt):
These cases were broken before, only the failure mode changes from
corruption after the next restart (when the wrong format is probed) to
failing the problematic write request.
Also note that like in the original patch, the restrictions only apply
if the image format has been guessed by probing. Explicitly specifying a
format allows guests to write anything they like.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1416497234-29880-8-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-11-20 18:27:12 +03:00
|
|
|
void *buf = NULL;
|
|
|
|
BlockDriver *drv;
|
|
|
|
QEMUIOVector local_qiov;
|
|
|
|
int ret;
|
|
|
|
|
2016-07-16 02:23:08 +03:00
|
|
|
if (bs->probed && offset < BLOCK_PROBE_BUF_SIZE && bytes) {
|
|
|
|
/* Handling partial writes would be a pain - so we just
|
|
|
|
* require that guests have 512-byte request alignment if
|
|
|
|
* probing occurred */
|
raw: Prohibit dangerous writes for probed images
If the user neglects to specify the image format, QEMU probes the
image to guess it automatically, for convenience.
Relying on format probing is insecure for raw images (CVE-2008-2004).
If the guest writes a suitable header to the device, the next probe
will recognize a format chosen by the guest. A malicious guest can
abuse this to gain access to host files, e.g. by crafting a QCOW2
header with backing file /etc/shadow.
Commit 1e72d3b (April 2008) provided -drive parameter format to let
users disable probing. Commit f965509 (March 2009) extended QCOW2 to
optionally store the backing file format, to let users disable backing
file probing. QED has had a flag to suppress probing since the
beginning (2010), set whenever a raw backing file is assigned.
All of these additions that allow to avoid format probing have to be
specified explicitly. The default still allows the attack.
In order to fix this, commit 79368c8 (July 2010) put probed raw images
in a restricted mode, in which they wouldn't be able to overwrite the
first few bytes of the image so that they would identify as a different
image. If a write to the first sector would write one of the signatures
of another driver, qemu would instead zero out the first four bytes.
This patch was later reverted in commit 8b33d9e (September 2010) because
it didn't get the handling of unaligned qiov members right.
Today's block layer that is based on coroutines and has qiov utility
functions makes it much easier to get this functionality right, so this
patch implements it.
The other differences of this patch to the old one are that it doesn't
silently write something different than the guest requested by zeroing
out some bytes (it fails the request instead) and that it doesn't
maintain a list of signatures in the raw driver (it calls the usual
probe function instead).
Note that this change doesn't introduce new breakage for false positive
cases where the guest legitimately writes data into the first sector
that matches the signatures of an image format (e.g. for nested virt):
These cases were broken before, only the failure mode changes from
corruption after the next restart (when the wrong format is probed) to
failing the problematic write request.
Also note that like in the original patch, the restrictions only apply
if the image format has been guessed by probing. Explicitly specifying a
format allows guests to write anything they like.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1416497234-29880-8-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-11-20 18:27:12 +03:00
|
|
|
QEMU_BUILD_BUG_ON(BLOCK_PROBE_BUF_SIZE != 512);
|
|
|
|
QEMU_BUILD_BUG_ON(BDRV_SECTOR_SIZE != 512);
|
2016-07-16 02:23:08 +03:00
|
|
|
assert(offset == 0 && bytes >= BLOCK_PROBE_BUF_SIZE);
|
raw: Prohibit dangerous writes for probed images
If the user neglects to specify the image format, QEMU probes the
image to guess it automatically, for convenience.
Relying on format probing is insecure for raw images (CVE-2008-2004).
If the guest writes a suitable header to the device, the next probe
will recognize a format chosen by the guest. A malicious guest can
abuse this to gain access to host files, e.g. by crafting a QCOW2
header with backing file /etc/shadow.
Commit 1e72d3b (April 2008) provided -drive parameter format to let
users disable probing. Commit f965509 (March 2009) extended QCOW2 to
optionally store the backing file format, to let users disable backing
file probing. QED has had a flag to suppress probing since the
beginning (2010), set whenever a raw backing file is assigned.
All of these additions that allow to avoid format probing have to be
specified explicitly. The default still allows the attack.
In order to fix this, commit 79368c8 (July 2010) put probed raw images
in a restricted mode, in which they wouldn't be able to overwrite the
first few bytes of the image so that they would identify as a different
image. If a write to the first sector would write one of the signatures
of another driver, qemu would instead zero out the first four bytes.
This patch was later reverted in commit 8b33d9e (September 2010) because
it didn't get the handling of unaligned qiov members right.
Today's block layer that is based on coroutines and has qiov utility
functions makes it much easier to get this functionality right, so this
patch implements it.
The other differences of this patch to the old one are that it doesn't
silently write something different than the guest requested by zeroing
out some bytes (it fails the request instead) and that it doesn't
maintain a list of signatures in the raw driver (it calls the usual
probe function instead).
Note that this change doesn't introduce new breakage for false positive
cases where the guest legitimately writes data into the first sector
that matches the signatures of an image format (e.g. for nested virt):
These cases were broken before, only the failure mode changes from
corruption after the next restart (when the wrong format is probed) to
failing the problematic write request.
Also note that like in the original patch, the restrictions only apply
if the image format has been guessed by probing. Explicitly specifying a
format allows guests to write anything they like.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1416497234-29880-8-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-11-20 18:27:12 +03:00
|
|
|
|
2015-06-16 15:19:22 +03:00
|
|
|
buf = qemu_try_blockalign(bs->file->bs, 512);
|
raw: Prohibit dangerous writes for probed images
If the user neglects to specify the image format, QEMU probes the
image to guess it automatically, for convenience.
Relying on format probing is insecure for raw images (CVE-2008-2004).
If the guest writes a suitable header to the device, the next probe
will recognize a format chosen by the guest. A malicious guest can
abuse this to gain access to host files, e.g. by crafting a QCOW2
header with backing file /etc/shadow.
Commit 1e72d3b (April 2008) provided -drive parameter format to let
users disable probing. Commit f965509 (March 2009) extended QCOW2 to
optionally store the backing file format, to let users disable backing
file probing. QED has had a flag to suppress probing since the
beginning (2010), set whenever a raw backing file is assigned.
All of these additions that allow to avoid format probing have to be
specified explicitly. The default still allows the attack.
In order to fix this, commit 79368c8 (July 2010) put probed raw images
in a restricted mode, in which they wouldn't be able to overwrite the
first few bytes of the image so that they would identify as a different
image. If a write to the first sector would write one of the signatures
of another driver, qemu would instead zero out the first four bytes.
This patch was later reverted in commit 8b33d9e (September 2010) because
it didn't get the handling of unaligned qiov members right.
Today's block layer that is based on coroutines and has qiov utility
functions makes it much easier to get this functionality right, so this
patch implements it.
The other differences of this patch to the old one are that it doesn't
silently write something different than the guest requested by zeroing
out some bytes (it fails the request instead) and that it doesn't
maintain a list of signatures in the raw driver (it calls the usual
probe function instead).
Note that this change doesn't introduce new breakage for false positive
cases where the guest legitimately writes data into the first sector
that matches the signatures of an image format (e.g. for nested virt):
These cases were broken before, only the failure mode changes from
corruption after the next restart (when the wrong format is probed) to
failing the problematic write request.
Also note that like in the original patch, the restrictions only apply
if the image format has been guessed by probing. Explicitly specifying a
format allows guests to write anything they like.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1416497234-29880-8-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-11-20 18:27:12 +03:00
|
|
|
if (!buf) {
|
|
|
|
ret = -ENOMEM;
|
|
|
|
goto fail;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = qemu_iovec_to_buf(qiov, 0, buf, 512);
|
|
|
|
if (ret != 512) {
|
|
|
|
ret = -EINVAL;
|
|
|
|
goto fail;
|
|
|
|
}
|
|
|
|
|
|
|
|
drv = bdrv_probe_all(buf, 512, NULL);
|
|
|
|
if (drv != bs->drv) {
|
|
|
|
ret = -EPERM;
|
|
|
|
goto fail;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Use the checked buffer, a malicious guest might be overwriting its
|
|
|
|
* original buffer in the background. */
|
|
|
|
qemu_iovec_init(&local_qiov, qiov->niov + 1);
|
|
|
|
qemu_iovec_add(&local_qiov, buf, 512);
|
|
|
|
qemu_iovec_concat(&local_qiov, qiov, 512, qiov->size - 512);
|
|
|
|
qiov = &local_qiov;
|
|
|
|
}
|
|
|
|
|
2018-06-01 12:26:40 +03:00
|
|
|
ret = raw_adjust_offset(bs, &offset, bytes, true);
|
|
|
|
if (ret) {
|
|
|
|
goto fail;
|
|
|
|
}
|
2016-10-31 13:27:40 +03:00
|
|
|
|
2013-08-21 14:41:18 +04:00
|
|
|
BLKDBG_EVENT(bs->file, BLKDBG_WRITE_AIO);
|
2016-07-16 02:23:08 +03:00
|
|
|
ret = bdrv_co_pwritev(bs->file, offset, bytes, qiov, flags);
|
raw: Prohibit dangerous writes for probed images
If the user neglects to specify the image format, QEMU probes the
image to guess it automatically, for convenience.
Relying on format probing is insecure for raw images (CVE-2008-2004).
If the guest writes a suitable header to the device, the next probe
will recognize a format chosen by the guest. A malicious guest can
abuse this to gain access to host files, e.g. by crafting a QCOW2
header with backing file /etc/shadow.
Commit 1e72d3b (April 2008) provided -drive parameter format to let
users disable probing. Commit f965509 (March 2009) extended QCOW2 to
optionally store the backing file format, to let users disable backing
file probing. QED has had a flag to suppress probing since the
beginning (2010), set whenever a raw backing file is assigned.
All of these additions that allow to avoid format probing have to be
specified explicitly. The default still allows the attack.
In order to fix this, commit 79368c8 (July 2010) put probed raw images
in a restricted mode, in which they wouldn't be able to overwrite the
first few bytes of the image so that they would identify as a different
image. If a write to the first sector would write one of the signatures
of another driver, qemu would instead zero out the first four bytes.
This patch was later reverted in commit 8b33d9e (September 2010) because
it didn't get the handling of unaligned qiov members right.
Today's block layer that is based on coroutines and has qiov utility
functions makes it much easier to get this functionality right, so this
patch implements it.
The other differences of this patch to the old one are that it doesn't
silently write something different than the guest requested by zeroing
out some bytes (it fails the request instead) and that it doesn't
maintain a list of signatures in the raw driver (it calls the usual
probe function instead).
Note that this change doesn't introduce new breakage for false positive
cases where the guest legitimately writes data into the first sector
that matches the signatures of an image format (e.g. for nested virt):
These cases were broken before, only the failure mode changes from
corruption after the next restart (when the wrong format is probed) to
failing the problematic write request.
Also note that like in the original patch, the restrictions only apply
if the image format has been guessed by probing. Explicitly specifying a
format allows guests to write anything they like.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1416497234-29880-8-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-11-20 18:27:12 +03:00
|
|
|
|
|
|
|
fail:
|
|
|
|
if (qiov == &local_qiov) {
|
|
|
|
qemu_iovec_destroy(&local_qiov);
|
|
|
|
}
|
|
|
|
qemu_vfree(buf);
|
|
|
|
return ret;
|
add skeleton for BSD licensed "raw" BlockDriver
On 08/05/13 15:03, Paolo Bonzini wrote:
>
>
> ----- Original Message -----
>> From: "Laszlo Ersek" <lersek@redhat.com>
>> To: "Paolo Bonzini" <pbonzini@redhat.com>
>> Sent: Monday, August 5, 2013 2:43:46 PM
>> Subject: Re: [PATCH 1/2] raw: add license header
>>
>> On 08/02/13 00:27, Paolo Bonzini wrote:
>>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote:
>>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote:
>>>>> Most of the block layer is under the BSD license, thus it is
>>>>> reasonable to license block/raw.c the same way. CCed people should
>>>>> ACK by replying with a Signed-off-by line.
>>>>
>>>> The coded was intended to be GPLv2.
>>>
>>> Laszlo, would you be willing to do clean-room reverse engineering?
>>>
>>> (No rants, please. :))
>>
>> What's the scope exactly?
>
> It's quite small, it's a file full of forwarders like
>
> static void raw_foo(BlockDriverState *bs)
> {
> return bdrv_foo(bs->file);
> }
>
> It's 170 lines of code, all as boring as this. I only picked you
> because I'm quite certain you have never seen the file (and the answer
> confirmed it).
>
> Basically:
>
> 1) BlockDriver is a struct in which these function members are
> interesting:
>
> .bdrv_reopen_prepare
> .bdrv_co_readv
> .bdrv_co_writev
> .bdrv_co_is_allocated
> .bdrv_co_write_zeroes
> .bdrv_co_discard
> .bdrv_getlength
> .bdrv_get_info
> .bdrv_truncate
> .bdrv_is_inserted
> .bdrv_media_changed
> .bdrv_eject
> .bdrv_lock_medium
> .bdrv_ioctl
> .bdrv_aio_ioctl
> .bdrv_has_zero_init
>
> They should be implemented as simple forwarders (see above).
> There are 16 functions listed here, you can easily see how this
> already accounts for 100+ SLOC roughly...
>
> The implementations of bdrv_co_readv and bdrv_co_writev should also
> call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The
> events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO.
>
> 2) This is also a simple forwarder function:
>
> .bdrv_create
>
> but there is no BlockDriverState argument so the forwarded-to function
> does not have a bs->file argument either. The forwarded-to function
> is bdrv_create_file.
>
> 3) These members are special
>
> .format_name is the string "raw"
> .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0
> .bdrv_close raw_close should do nothing
> .bdrv_probe raw_probe should just return 1.
>
> 4) There is another member, .create_options, which is an array of
> QEMUOptionParameter structs, terminated by an all-zero item. The only
> option you need is for the virtual disk size. You will find something
> to copy from in other block drivers, for example block/qcow2.c.
>
> 5) Formats are registered with bdrv_register (takes a BlockDriver*).
> You also need to pass the caller of bdrv_register to block_init.
>
> 6) I'm not sure how to organize the patch series, so I'll leave this to
> your creativity. I guess in this case move/copy detection of git should
> be disabled. I would definitely include this spec in the commit
> message as a proof of clean-room reverse engineering.
>
> 7) Remember a BSD header like the one in block.c.
>
> Paolo
This patch implements the email up to the paragraph ending with "100+ SLOC
roughly". The skeleton is generated from the list there, with a simple
shell loop using "sed" and the raw_foo() template.
The BSD license block is copied (and reflowed) from
"util/qemu-progress.c".
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-21 14:41:17 +04:00
|
|
|
}
|
|
|
|
|
2018-02-13 23:26:54 +03:00
|
|
|
static int coroutine_fn raw_co_block_status(BlockDriverState *bs,
|
|
|
|
bool want_zero, int64_t offset,
|
|
|
|
int64_t bytes, int64_t *pnum,
|
|
|
|
int64_t *map,
|
2016-01-26 06:58:48 +03:00
|
|
|
BlockDriverState **file)
|
add skeleton for BSD licensed "raw" BlockDriver
On 08/05/13 15:03, Paolo Bonzini wrote:
>
>
> ----- Original Message -----
>> From: "Laszlo Ersek" <lersek@redhat.com>
>> To: "Paolo Bonzini" <pbonzini@redhat.com>
>> Sent: Monday, August 5, 2013 2:43:46 PM
>> Subject: Re: [PATCH 1/2] raw: add license header
>>
>> On 08/02/13 00:27, Paolo Bonzini wrote:
>>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote:
>>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote:
>>>>> Most of the block layer is under the BSD license, thus it is
>>>>> reasonable to license block/raw.c the same way. CCed people should
>>>>> ACK by replying with a Signed-off-by line.
>>>>
>>>> The coded was intended to be GPLv2.
>>>
>>> Laszlo, would you be willing to do clean-room reverse engineering?
>>>
>>> (No rants, please. :))
>>
>> What's the scope exactly?
>
> It's quite small, it's a file full of forwarders like
>
> static void raw_foo(BlockDriverState *bs)
> {
> return bdrv_foo(bs->file);
> }
>
> It's 170 lines of code, all as boring as this. I only picked you
> because I'm quite certain you have never seen the file (and the answer
> confirmed it).
>
> Basically:
>
> 1) BlockDriver is a struct in which these function members are
> interesting:
>
> .bdrv_reopen_prepare
> .bdrv_co_readv
> .bdrv_co_writev
> .bdrv_co_is_allocated
> .bdrv_co_write_zeroes
> .bdrv_co_discard
> .bdrv_getlength
> .bdrv_get_info
> .bdrv_truncate
> .bdrv_is_inserted
> .bdrv_media_changed
> .bdrv_eject
> .bdrv_lock_medium
> .bdrv_ioctl
> .bdrv_aio_ioctl
> .bdrv_has_zero_init
>
> They should be implemented as simple forwarders (see above).
> There are 16 functions listed here, you can easily see how this
> already accounts for 100+ SLOC roughly...
>
> The implementations of bdrv_co_readv and bdrv_co_writev should also
> call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The
> events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO.
>
> 2) This is also a simple forwarder function:
>
> .bdrv_create
>
> but there is no BlockDriverState argument so the forwarded-to function
> does not have a bs->file argument either. The forwarded-to function
> is bdrv_create_file.
>
> 3) These members are special
>
> .format_name is the string "raw"
> .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0
> .bdrv_close raw_close should do nothing
> .bdrv_probe raw_probe should just return 1.
>
> 4) There is another member, .create_options, which is an array of
> QEMUOptionParameter structs, terminated by an all-zero item. The only
> option you need is for the virtual disk size. You will find something
> to copy from in other block drivers, for example block/qcow2.c.
>
> 5) Formats are registered with bdrv_register (takes a BlockDriver*).
> You also need to pass the caller of bdrv_register to block_init.
>
> 6) I'm not sure how to organize the patch series, so I'll leave this to
> your creativity. I guess in this case move/copy detection of git should
> be disabled. I would definitely include this spec in the commit
> message as a proof of clean-room reverse engineering.
>
> 7) Remember a BSD header like the one in block.c.
>
> Paolo
This patch implements the email up to the paragraph ending with "100+ SLOC
roughly". The skeleton is generated from the list there, with a simple
shell loop using "sed" and the raw_foo() template.
The BSD license block is copied (and reflowed) from
"util/qemu-progress.c".
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-21 14:41:17 +04:00
|
|
|
{
|
2016-10-31 13:27:40 +03:00
|
|
|
BDRVRawState *s = bs->opaque;
|
2018-02-13 23:26:54 +03:00
|
|
|
*pnum = bytes;
|
2016-01-26 06:58:51 +03:00
|
|
|
*file = bs->file->bs;
|
2018-02-13 23:26:54 +03:00
|
|
|
*map = offset + s->offset;
|
|
|
|
return BDRV_BLOCK_RAW | BDRV_BLOCK_OFFSET_VALID;
|
add skeleton for BSD licensed "raw" BlockDriver
On 08/05/13 15:03, Paolo Bonzini wrote:
>
>
> ----- Original Message -----
>> From: "Laszlo Ersek" <lersek@redhat.com>
>> To: "Paolo Bonzini" <pbonzini@redhat.com>
>> Sent: Monday, August 5, 2013 2:43:46 PM
>> Subject: Re: [PATCH 1/2] raw: add license header
>>
>> On 08/02/13 00:27, Paolo Bonzini wrote:
>>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote:
>>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote:
>>>>> Most of the block layer is under the BSD license, thus it is
>>>>> reasonable to license block/raw.c the same way. CCed people should
>>>>> ACK by replying with a Signed-off-by line.
>>>>
>>>> The coded was intended to be GPLv2.
>>>
>>> Laszlo, would you be willing to do clean-room reverse engineering?
>>>
>>> (No rants, please. :))
>>
>> What's the scope exactly?
>
> It's quite small, it's a file full of forwarders like
>
> static void raw_foo(BlockDriverState *bs)
> {
> return bdrv_foo(bs->file);
> }
>
> It's 170 lines of code, all as boring as this. I only picked you
> because I'm quite certain you have never seen the file (and the answer
> confirmed it).
>
> Basically:
>
> 1) BlockDriver is a struct in which these function members are
> interesting:
>
> .bdrv_reopen_prepare
> .bdrv_co_readv
> .bdrv_co_writev
> .bdrv_co_is_allocated
> .bdrv_co_write_zeroes
> .bdrv_co_discard
> .bdrv_getlength
> .bdrv_get_info
> .bdrv_truncate
> .bdrv_is_inserted
> .bdrv_media_changed
> .bdrv_eject
> .bdrv_lock_medium
> .bdrv_ioctl
> .bdrv_aio_ioctl
> .bdrv_has_zero_init
>
> They should be implemented as simple forwarders (see above).
> There are 16 functions listed here, you can easily see how this
> already accounts for 100+ SLOC roughly...
>
> The implementations of bdrv_co_readv and bdrv_co_writev should also
> call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The
> events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO.
>
> 2) This is also a simple forwarder function:
>
> .bdrv_create
>
> but there is no BlockDriverState argument so the forwarded-to function
> does not have a bs->file argument either. The forwarded-to function
> is bdrv_create_file.
>
> 3) These members are special
>
> .format_name is the string "raw"
> .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0
> .bdrv_close raw_close should do nothing
> .bdrv_probe raw_probe should just return 1.
>
> 4) There is another member, .create_options, which is an array of
> QEMUOptionParameter structs, terminated by an all-zero item. The only
> option you need is for the virtual disk size. You will find something
> to copy from in other block drivers, for example block/qcow2.c.
>
> 5) Formats are registered with bdrv_register (takes a BlockDriver*).
> You also need to pass the caller of bdrv_register to block_init.
>
> 6) I'm not sure how to organize the patch series, so I'll leave this to
> your creativity. I guess in this case move/copy detection of git should
> be disabled. I would definitely include this spec in the commit
> message as a proof of clean-room reverse engineering.
>
> 7) Remember a BSD header like the one in block.c.
>
> Paolo
This patch implements the email up to the paragraph ending with "100+ SLOC
roughly". The skeleton is generated from the list there, with a simple
shell loop using "sed" and the raw_foo() template.
The BSD license block is copied (and reflowed) from
"util/qemu-progress.c".
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-21 14:41:17 +04:00
|
|
|
}
|
|
|
|
|
2016-06-02 00:10:11 +03:00
|
|
|
static int coroutine_fn raw_co_pwrite_zeroes(BlockDriverState *bs,
|
2017-06-09 13:18:08 +03:00
|
|
|
int64_t offset, int bytes,
|
2016-06-02 00:10:11 +03:00
|
|
|
BdrvRequestFlags flags)
|
add skeleton for BSD licensed "raw" BlockDriver
On 08/05/13 15:03, Paolo Bonzini wrote:
>
>
> ----- Original Message -----
>> From: "Laszlo Ersek" <lersek@redhat.com>
>> To: "Paolo Bonzini" <pbonzini@redhat.com>
>> Sent: Monday, August 5, 2013 2:43:46 PM
>> Subject: Re: [PATCH 1/2] raw: add license header
>>
>> On 08/02/13 00:27, Paolo Bonzini wrote:
>>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote:
>>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote:
>>>>> Most of the block layer is under the BSD license, thus it is
>>>>> reasonable to license block/raw.c the same way. CCed people should
>>>>> ACK by replying with a Signed-off-by line.
>>>>
>>>> The coded was intended to be GPLv2.
>>>
>>> Laszlo, would you be willing to do clean-room reverse engineering?
>>>
>>> (No rants, please. :))
>>
>> What's the scope exactly?
>
> It's quite small, it's a file full of forwarders like
>
> static void raw_foo(BlockDriverState *bs)
> {
> return bdrv_foo(bs->file);
> }
>
> It's 170 lines of code, all as boring as this. I only picked you
> because I'm quite certain you have never seen the file (and the answer
> confirmed it).
>
> Basically:
>
> 1) BlockDriver is a struct in which these function members are
> interesting:
>
> .bdrv_reopen_prepare
> .bdrv_co_readv
> .bdrv_co_writev
> .bdrv_co_is_allocated
> .bdrv_co_write_zeroes
> .bdrv_co_discard
> .bdrv_getlength
> .bdrv_get_info
> .bdrv_truncate
> .bdrv_is_inserted
> .bdrv_media_changed
> .bdrv_eject
> .bdrv_lock_medium
> .bdrv_ioctl
> .bdrv_aio_ioctl
> .bdrv_has_zero_init
>
> They should be implemented as simple forwarders (see above).
> There are 16 functions listed here, you can easily see how this
> already accounts for 100+ SLOC roughly...
>
> The implementations of bdrv_co_readv and bdrv_co_writev should also
> call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The
> events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO.
>
> 2) This is also a simple forwarder function:
>
> .bdrv_create
>
> but there is no BlockDriverState argument so the forwarded-to function
> does not have a bs->file argument either. The forwarded-to function
> is bdrv_create_file.
>
> 3) These members are special
>
> .format_name is the string "raw"
> .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0
> .bdrv_close raw_close should do nothing
> .bdrv_probe raw_probe should just return 1.
>
> 4) There is another member, .create_options, which is an array of
> QEMUOptionParameter structs, terminated by an all-zero item. The only
> option you need is for the virtual disk size. You will find something
> to copy from in other block drivers, for example block/qcow2.c.
>
> 5) Formats are registered with bdrv_register (takes a BlockDriver*).
> You also need to pass the caller of bdrv_register to block_init.
>
> 6) I'm not sure how to organize the patch series, so I'll leave this to
> your creativity. I guess in this case move/copy detection of git should
> be disabled. I would definitely include this spec in the commit
> message as a proof of clean-room reverse engineering.
>
> 7) Remember a BSD header like the one in block.c.
>
> Paolo
This patch implements the email up to the paragraph ending with "100+ SLOC
roughly". The skeleton is generated from the list there, with a simple
shell loop using "sed" and the raw_foo() template.
The BSD license block is copied (and reflowed) from
"util/qemu-progress.c".
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-21 14:41:17 +04:00
|
|
|
{
|
2018-06-01 12:26:40 +03:00
|
|
|
int ret;
|
|
|
|
|
|
|
|
ret = raw_adjust_offset(bs, (uint64_t *)&offset, bytes, true);
|
|
|
|
if (ret) {
|
|
|
|
return ret;
|
2016-10-31 13:27:40 +03:00
|
|
|
}
|
2017-06-09 13:18:08 +03:00
|
|
|
return bdrv_co_pwrite_zeroes(bs->file, offset, bytes, flags);
|
add skeleton for BSD licensed "raw" BlockDriver
On 08/05/13 15:03, Paolo Bonzini wrote:
>
>
> ----- Original Message -----
>> From: "Laszlo Ersek" <lersek@redhat.com>
>> To: "Paolo Bonzini" <pbonzini@redhat.com>
>> Sent: Monday, August 5, 2013 2:43:46 PM
>> Subject: Re: [PATCH 1/2] raw: add license header
>>
>> On 08/02/13 00:27, Paolo Bonzini wrote:
>>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote:
>>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote:
>>>>> Most of the block layer is under the BSD license, thus it is
>>>>> reasonable to license block/raw.c the same way. CCed people should
>>>>> ACK by replying with a Signed-off-by line.
>>>>
>>>> The coded was intended to be GPLv2.
>>>
>>> Laszlo, would you be willing to do clean-room reverse engineering?
>>>
>>> (No rants, please. :))
>>
>> What's the scope exactly?
>
> It's quite small, it's a file full of forwarders like
>
> static void raw_foo(BlockDriverState *bs)
> {
> return bdrv_foo(bs->file);
> }
>
> It's 170 lines of code, all as boring as this. I only picked you
> because I'm quite certain you have never seen the file (and the answer
> confirmed it).
>
> Basically:
>
> 1) BlockDriver is a struct in which these function members are
> interesting:
>
> .bdrv_reopen_prepare
> .bdrv_co_readv
> .bdrv_co_writev
> .bdrv_co_is_allocated
> .bdrv_co_write_zeroes
> .bdrv_co_discard
> .bdrv_getlength
> .bdrv_get_info
> .bdrv_truncate
> .bdrv_is_inserted
> .bdrv_media_changed
> .bdrv_eject
> .bdrv_lock_medium
> .bdrv_ioctl
> .bdrv_aio_ioctl
> .bdrv_has_zero_init
>
> They should be implemented as simple forwarders (see above).
> There are 16 functions listed here, you can easily see how this
> already accounts for 100+ SLOC roughly...
>
> The implementations of bdrv_co_readv and bdrv_co_writev should also
> call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The
> events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO.
>
> 2) This is also a simple forwarder function:
>
> .bdrv_create
>
> but there is no BlockDriverState argument so the forwarded-to function
> does not have a bs->file argument either. The forwarded-to function
> is bdrv_create_file.
>
> 3) These members are special
>
> .format_name is the string "raw"
> .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0
> .bdrv_close raw_close should do nothing
> .bdrv_probe raw_probe should just return 1.
>
> 4) There is another member, .create_options, which is an array of
> QEMUOptionParameter structs, terminated by an all-zero item. The only
> option you need is for the virtual disk size. You will find something
> to copy from in other block drivers, for example block/qcow2.c.
>
> 5) Formats are registered with bdrv_register (takes a BlockDriver*).
> You also need to pass the caller of bdrv_register to block_init.
>
> 6) I'm not sure how to organize the patch series, so I'll leave this to
> your creativity. I guess in this case move/copy detection of git should
> be disabled. I would definitely include this spec in the commit
> message as a proof of clean-room reverse engineering.
>
> 7) Remember a BSD header like the one in block.c.
>
> Paolo
This patch implements the email up to the paragraph ending with "100+ SLOC
roughly". The skeleton is generated from the list there, with a simple
shell loop using "sed" and the raw_foo() template.
The BSD license block is copied (and reflowed) from
"util/qemu-progress.c".
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-21 14:41:17 +04:00
|
|
|
}
|
|
|
|
|
2016-07-16 02:23:04 +03:00
|
|
|
static int coroutine_fn raw_co_pdiscard(BlockDriverState *bs,
|
2017-06-09 13:18:08 +03:00
|
|
|
int64_t offset, int bytes)
|
add skeleton for BSD licensed "raw" BlockDriver
On 08/05/13 15:03, Paolo Bonzini wrote:
>
>
> ----- Original Message -----
>> From: "Laszlo Ersek" <lersek@redhat.com>
>> To: "Paolo Bonzini" <pbonzini@redhat.com>
>> Sent: Monday, August 5, 2013 2:43:46 PM
>> Subject: Re: [PATCH 1/2] raw: add license header
>>
>> On 08/02/13 00:27, Paolo Bonzini wrote:
>>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote:
>>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote:
>>>>> Most of the block layer is under the BSD license, thus it is
>>>>> reasonable to license block/raw.c the same way. CCed people should
>>>>> ACK by replying with a Signed-off-by line.
>>>>
>>>> The coded was intended to be GPLv2.
>>>
>>> Laszlo, would you be willing to do clean-room reverse engineering?
>>>
>>> (No rants, please. :))
>>
>> What's the scope exactly?
>
> It's quite small, it's a file full of forwarders like
>
> static void raw_foo(BlockDriverState *bs)
> {
> return bdrv_foo(bs->file);
> }
>
> It's 170 lines of code, all as boring as this. I only picked you
> because I'm quite certain you have never seen the file (and the answer
> confirmed it).
>
> Basically:
>
> 1) BlockDriver is a struct in which these function members are
> interesting:
>
> .bdrv_reopen_prepare
> .bdrv_co_readv
> .bdrv_co_writev
> .bdrv_co_is_allocated
> .bdrv_co_write_zeroes
> .bdrv_co_discard
> .bdrv_getlength
> .bdrv_get_info
> .bdrv_truncate
> .bdrv_is_inserted
> .bdrv_media_changed
> .bdrv_eject
> .bdrv_lock_medium
> .bdrv_ioctl
> .bdrv_aio_ioctl
> .bdrv_has_zero_init
>
> They should be implemented as simple forwarders (see above).
> There are 16 functions listed here, you can easily see how this
> already accounts for 100+ SLOC roughly...
>
> The implementations of bdrv_co_readv and bdrv_co_writev should also
> call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The
> events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO.
>
> 2) This is also a simple forwarder function:
>
> .bdrv_create
>
> but there is no BlockDriverState argument so the forwarded-to function
> does not have a bs->file argument either. The forwarded-to function
> is bdrv_create_file.
>
> 3) These members are special
>
> .format_name is the string "raw"
> .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0
> .bdrv_close raw_close should do nothing
> .bdrv_probe raw_probe should just return 1.
>
> 4) There is another member, .create_options, which is an array of
> QEMUOptionParameter structs, terminated by an all-zero item. The only
> option you need is for the virtual disk size. You will find something
> to copy from in other block drivers, for example block/qcow2.c.
>
> 5) Formats are registered with bdrv_register (takes a BlockDriver*).
> You also need to pass the caller of bdrv_register to block_init.
>
> 6) I'm not sure how to organize the patch series, so I'll leave this to
> your creativity. I guess in this case move/copy detection of git should
> be disabled. I would definitely include this spec in the commit
> message as a proof of clean-room reverse engineering.
>
> 7) Remember a BSD header like the one in block.c.
>
> Paolo
This patch implements the email up to the paragraph ending with "100+ SLOC
roughly". The skeleton is generated from the list there, with a simple
shell loop using "sed" and the raw_foo() template.
The BSD license block is copied (and reflowed) from
"util/qemu-progress.c".
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-21 14:41:17 +04:00
|
|
|
{
|
2018-06-01 12:26:40 +03:00
|
|
|
int ret;
|
|
|
|
|
|
|
|
ret = raw_adjust_offset(bs, (uint64_t *)&offset, bytes, true);
|
|
|
|
if (ret) {
|
|
|
|
return ret;
|
2016-10-31 13:27:40 +03:00
|
|
|
}
|
2018-07-10 09:31:17 +03:00
|
|
|
return bdrv_co_pdiscard(bs->file, offset, bytes);
|
add skeleton for BSD licensed "raw" BlockDriver
On 08/05/13 15:03, Paolo Bonzini wrote:
>
>
> ----- Original Message -----
>> From: "Laszlo Ersek" <lersek@redhat.com>
>> To: "Paolo Bonzini" <pbonzini@redhat.com>
>> Sent: Monday, August 5, 2013 2:43:46 PM
>> Subject: Re: [PATCH 1/2] raw: add license header
>>
>> On 08/02/13 00:27, Paolo Bonzini wrote:
>>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote:
>>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote:
>>>>> Most of the block layer is under the BSD license, thus it is
>>>>> reasonable to license block/raw.c the same way. CCed people should
>>>>> ACK by replying with a Signed-off-by line.
>>>>
>>>> The coded was intended to be GPLv2.
>>>
>>> Laszlo, would you be willing to do clean-room reverse engineering?
>>>
>>> (No rants, please. :))
>>
>> What's the scope exactly?
>
> It's quite small, it's a file full of forwarders like
>
> static void raw_foo(BlockDriverState *bs)
> {
> return bdrv_foo(bs->file);
> }
>
> It's 170 lines of code, all as boring as this. I only picked you
> because I'm quite certain you have never seen the file (and the answer
> confirmed it).
>
> Basically:
>
> 1) BlockDriver is a struct in which these function members are
> interesting:
>
> .bdrv_reopen_prepare
> .bdrv_co_readv
> .bdrv_co_writev
> .bdrv_co_is_allocated
> .bdrv_co_write_zeroes
> .bdrv_co_discard
> .bdrv_getlength
> .bdrv_get_info
> .bdrv_truncate
> .bdrv_is_inserted
> .bdrv_media_changed
> .bdrv_eject
> .bdrv_lock_medium
> .bdrv_ioctl
> .bdrv_aio_ioctl
> .bdrv_has_zero_init
>
> They should be implemented as simple forwarders (see above).
> There are 16 functions listed here, you can easily see how this
> already accounts for 100+ SLOC roughly...
>
> The implementations of bdrv_co_readv and bdrv_co_writev should also
> call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The
> events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO.
>
> 2) This is also a simple forwarder function:
>
> .bdrv_create
>
> but there is no BlockDriverState argument so the forwarded-to function
> does not have a bs->file argument either. The forwarded-to function
> is bdrv_create_file.
>
> 3) These members are special
>
> .format_name is the string "raw"
> .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0
> .bdrv_close raw_close should do nothing
> .bdrv_probe raw_probe should just return 1.
>
> 4) There is another member, .create_options, which is an array of
> QEMUOptionParameter structs, terminated by an all-zero item. The only
> option you need is for the virtual disk size. You will find something
> to copy from in other block drivers, for example block/qcow2.c.
>
> 5) Formats are registered with bdrv_register (takes a BlockDriver*).
> You also need to pass the caller of bdrv_register to block_init.
>
> 6) I'm not sure how to organize the patch series, so I'll leave this to
> your creativity. I guess in this case move/copy detection of git should
> be disabled. I would definitely include this spec in the commit
> message as a proof of clean-room reverse engineering.
>
> 7) Remember a BSD header like the one in block.c.
>
> Paolo
This patch implements the email up to the paragraph ending with "100+ SLOC
roughly". The skeleton is generated from the list there, with a simple
shell loop using "sed" and the raw_foo() template.
The BSD license block is copied (and reflowed) from
"util/qemu-progress.c".
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-21 14:41:17 +04:00
|
|
|
}
|
|
|
|
|
2013-08-21 14:41:23 +04:00
|
|
|
static int64_t raw_getlength(BlockDriverState *bs)
|
add skeleton for BSD licensed "raw" BlockDriver
On 08/05/13 15:03, Paolo Bonzini wrote:
>
>
> ----- Original Message -----
>> From: "Laszlo Ersek" <lersek@redhat.com>
>> To: "Paolo Bonzini" <pbonzini@redhat.com>
>> Sent: Monday, August 5, 2013 2:43:46 PM
>> Subject: Re: [PATCH 1/2] raw: add license header
>>
>> On 08/02/13 00:27, Paolo Bonzini wrote:
>>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote:
>>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote:
>>>>> Most of the block layer is under the BSD license, thus it is
>>>>> reasonable to license block/raw.c the same way. CCed people should
>>>>> ACK by replying with a Signed-off-by line.
>>>>
>>>> The coded was intended to be GPLv2.
>>>
>>> Laszlo, would you be willing to do clean-room reverse engineering?
>>>
>>> (No rants, please. :))
>>
>> What's the scope exactly?
>
> It's quite small, it's a file full of forwarders like
>
> static void raw_foo(BlockDriverState *bs)
> {
> return bdrv_foo(bs->file);
> }
>
> It's 170 lines of code, all as boring as this. I only picked you
> because I'm quite certain you have never seen the file (and the answer
> confirmed it).
>
> Basically:
>
> 1) BlockDriver is a struct in which these function members are
> interesting:
>
> .bdrv_reopen_prepare
> .bdrv_co_readv
> .bdrv_co_writev
> .bdrv_co_is_allocated
> .bdrv_co_write_zeroes
> .bdrv_co_discard
> .bdrv_getlength
> .bdrv_get_info
> .bdrv_truncate
> .bdrv_is_inserted
> .bdrv_media_changed
> .bdrv_eject
> .bdrv_lock_medium
> .bdrv_ioctl
> .bdrv_aio_ioctl
> .bdrv_has_zero_init
>
> They should be implemented as simple forwarders (see above).
> There are 16 functions listed here, you can easily see how this
> already accounts for 100+ SLOC roughly...
>
> The implementations of bdrv_co_readv and bdrv_co_writev should also
> call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The
> events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO.
>
> 2) This is also a simple forwarder function:
>
> .bdrv_create
>
> but there is no BlockDriverState argument so the forwarded-to function
> does not have a bs->file argument either. The forwarded-to function
> is bdrv_create_file.
>
> 3) These members are special
>
> .format_name is the string "raw"
> .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0
> .bdrv_close raw_close should do nothing
> .bdrv_probe raw_probe should just return 1.
>
> 4) There is another member, .create_options, which is an array of
> QEMUOptionParameter structs, terminated by an all-zero item. The only
> option you need is for the virtual disk size. You will find something
> to copy from in other block drivers, for example block/qcow2.c.
>
> 5) Formats are registered with bdrv_register (takes a BlockDriver*).
> You also need to pass the caller of bdrv_register to block_init.
>
> 6) I'm not sure how to organize the patch series, so I'll leave this to
> your creativity. I guess in this case move/copy detection of git should
> be disabled. I would definitely include this spec in the commit
> message as a proof of clean-room reverse engineering.
>
> 7) Remember a BSD header like the one in block.c.
>
> Paolo
This patch implements the email up to the paragraph ending with "100+ SLOC
roughly". The skeleton is generated from the list there, with a simple
shell loop using "sed" and the raw_foo() template.
The BSD license block is copied (and reflowed) from
"util/qemu-progress.c".
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-21 14:41:17 +04:00
|
|
|
{
|
2016-10-31 13:27:40 +03:00
|
|
|
int64_t len;
|
|
|
|
BDRVRawState *s = bs->opaque;
|
|
|
|
|
|
|
|
/* Update size. It should not change unless the file was externally
|
|
|
|
* modified. */
|
|
|
|
len = bdrv_getlength(bs->file->bs);
|
|
|
|
if (len < 0) {
|
|
|
|
return len;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (len < s->offset) {
|
|
|
|
s->size = 0;
|
|
|
|
} else {
|
|
|
|
if (s->has_size) {
|
|
|
|
/* Try to honour the size */
|
|
|
|
s->size = MIN(s->size, len - s->offset);
|
|
|
|
} else {
|
|
|
|
s->size = len - s->offset;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return s->size;
|
add skeleton for BSD licensed "raw" BlockDriver
On 08/05/13 15:03, Paolo Bonzini wrote:
>
>
> ----- Original Message -----
>> From: "Laszlo Ersek" <lersek@redhat.com>
>> To: "Paolo Bonzini" <pbonzini@redhat.com>
>> Sent: Monday, August 5, 2013 2:43:46 PM
>> Subject: Re: [PATCH 1/2] raw: add license header
>>
>> On 08/02/13 00:27, Paolo Bonzini wrote:
>>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote:
>>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote:
>>>>> Most of the block layer is under the BSD license, thus it is
>>>>> reasonable to license block/raw.c the same way. CCed people should
>>>>> ACK by replying with a Signed-off-by line.
>>>>
>>>> The coded was intended to be GPLv2.
>>>
>>> Laszlo, would you be willing to do clean-room reverse engineering?
>>>
>>> (No rants, please. :))
>>
>> What's the scope exactly?
>
> It's quite small, it's a file full of forwarders like
>
> static void raw_foo(BlockDriverState *bs)
> {
> return bdrv_foo(bs->file);
> }
>
> It's 170 lines of code, all as boring as this. I only picked you
> because I'm quite certain you have never seen the file (and the answer
> confirmed it).
>
> Basically:
>
> 1) BlockDriver is a struct in which these function members are
> interesting:
>
> .bdrv_reopen_prepare
> .bdrv_co_readv
> .bdrv_co_writev
> .bdrv_co_is_allocated
> .bdrv_co_write_zeroes
> .bdrv_co_discard
> .bdrv_getlength
> .bdrv_get_info
> .bdrv_truncate
> .bdrv_is_inserted
> .bdrv_media_changed
> .bdrv_eject
> .bdrv_lock_medium
> .bdrv_ioctl
> .bdrv_aio_ioctl
> .bdrv_has_zero_init
>
> They should be implemented as simple forwarders (see above).
> There are 16 functions listed here, you can easily see how this
> already accounts for 100+ SLOC roughly...
>
> The implementations of bdrv_co_readv and bdrv_co_writev should also
> call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The
> events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO.
>
> 2) This is also a simple forwarder function:
>
> .bdrv_create
>
> but there is no BlockDriverState argument so the forwarded-to function
> does not have a bs->file argument either. The forwarded-to function
> is bdrv_create_file.
>
> 3) These members are special
>
> .format_name is the string "raw"
> .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0
> .bdrv_close raw_close should do nothing
> .bdrv_probe raw_probe should just return 1.
>
> 4) There is another member, .create_options, which is an array of
> QEMUOptionParameter structs, terminated by an all-zero item. The only
> option you need is for the virtual disk size. You will find something
> to copy from in other block drivers, for example block/qcow2.c.
>
> 5) Formats are registered with bdrv_register (takes a BlockDriver*).
> You also need to pass the caller of bdrv_register to block_init.
>
> 6) I'm not sure how to organize the patch series, so I'll leave this to
> your creativity. I guess in this case move/copy detection of git should
> be disabled. I would definitely include this spec in the commit
> message as a proof of clean-room reverse engineering.
>
> 7) Remember a BSD header like the one in block.c.
>
> Paolo
This patch implements the email up to the paragraph ending with "100+ SLOC
roughly". The skeleton is generated from the list there, with a simple
shell loop using "sed" and the raw_foo() template.
The BSD license block is copied (and reflowed) from
"util/qemu-progress.c".
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-21 14:41:17 +04:00
|
|
|
}
|
|
|
|
|
2017-07-05 15:57:31 +03:00
|
|
|
static BlockMeasureInfo *raw_measure(QemuOpts *opts, BlockDriverState *in_bs,
|
|
|
|
Error **errp)
|
|
|
|
{
|
|
|
|
BlockMeasureInfo *info;
|
|
|
|
int64_t required;
|
|
|
|
|
|
|
|
if (in_bs) {
|
|
|
|
required = bdrv_getlength(in_bs);
|
|
|
|
if (required < 0) {
|
|
|
|
error_setg_errno(errp, -required, "Unable to get image size");
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
required = ROUND_UP(qemu_opt_get_size_del(opts, BLOCK_OPT_SIZE, 0),
|
|
|
|
BDRV_SECTOR_SIZE);
|
|
|
|
}
|
|
|
|
|
qcow2: Expose bitmaps' size during measure
It's useful to know how much space can be occupied by qcow2 persistent
bitmaps, even though such metadata is unrelated to the guest-visible
data. Report this value as an additional QMP field, present when
measuring an existing image and output format that both support
bitmaps. Update iotest 178 and 190 to updated output, as well as new
coverage in 190 demonstrating non-zero values made possible with the
recently-added qemu-img bitmap command (see 3b51ab4b).
The new 'bitmaps size:' field is displayed automatically as part of
'qemu-img measure' any time it is present in QMP (that is, any time
both the source image being measured and destination format support
bitmaps, even if the measurement is 0 because there are no bitmaps
present). If the field is absent, it means that no bitmaps can be
copied (source, destination, or both lack bitmaps, including when
measuring based on size rather than on a source image). This behavior
is compatible with an upcoming patch adding 'qemu-img convert
--bitmaps': that command will fail in the same situations where this
patch omits the field.
The addition of a new field demonstrates why we should always
zero-initialize qapi C structs; while the qcow2 driver still fully
populates all fields, the raw and crypto drivers had to be tweaked to
avoid uninitialized data.
Consideration was also given towards having a 'qemu-img measure
--bitmaps' which errors out when bitmaps are not possible, and
otherwise sums the bitmaps into the existing allocation totals rather
than displaying as a separate field, as a potential convenience
factor. But this was ultimately decided to be more complexity than
necessary when the QMP interface was sufficient enough with bitmaps
remaining a separate field.
See also: https://bugzilla.redhat.com/1779904
Reported-by: Nir Soffer <nsoffer@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200521192137.1120211-3-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2020-05-21 22:21:34 +03:00
|
|
|
info = g_new0(BlockMeasureInfo, 1);
|
2017-07-05 15:57:31 +03:00
|
|
|
info->required = required;
|
|
|
|
|
|
|
|
/* Unallocated sectors count towards the file size in raw images */
|
|
|
|
info->fully_allocated = info->required;
|
|
|
|
return info;
|
|
|
|
}
|
|
|
|
|
2013-08-21 14:41:23 +04:00
|
|
|
static int raw_get_info(BlockDriverState *bs, BlockDriverInfo *bdi)
|
add skeleton for BSD licensed "raw" BlockDriver
On 08/05/13 15:03, Paolo Bonzini wrote:
>
>
> ----- Original Message -----
>> From: "Laszlo Ersek" <lersek@redhat.com>
>> To: "Paolo Bonzini" <pbonzini@redhat.com>
>> Sent: Monday, August 5, 2013 2:43:46 PM
>> Subject: Re: [PATCH 1/2] raw: add license header
>>
>> On 08/02/13 00:27, Paolo Bonzini wrote:
>>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote:
>>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote:
>>>>> Most of the block layer is under the BSD license, thus it is
>>>>> reasonable to license block/raw.c the same way. CCed people should
>>>>> ACK by replying with a Signed-off-by line.
>>>>
>>>> The coded was intended to be GPLv2.
>>>
>>> Laszlo, would you be willing to do clean-room reverse engineering?
>>>
>>> (No rants, please. :))
>>
>> What's the scope exactly?
>
> It's quite small, it's a file full of forwarders like
>
> static void raw_foo(BlockDriverState *bs)
> {
> return bdrv_foo(bs->file);
> }
>
> It's 170 lines of code, all as boring as this. I only picked you
> because I'm quite certain you have never seen the file (and the answer
> confirmed it).
>
> Basically:
>
> 1) BlockDriver is a struct in which these function members are
> interesting:
>
> .bdrv_reopen_prepare
> .bdrv_co_readv
> .bdrv_co_writev
> .bdrv_co_is_allocated
> .bdrv_co_write_zeroes
> .bdrv_co_discard
> .bdrv_getlength
> .bdrv_get_info
> .bdrv_truncate
> .bdrv_is_inserted
> .bdrv_media_changed
> .bdrv_eject
> .bdrv_lock_medium
> .bdrv_ioctl
> .bdrv_aio_ioctl
> .bdrv_has_zero_init
>
> They should be implemented as simple forwarders (see above).
> There are 16 functions listed here, you can easily see how this
> already accounts for 100+ SLOC roughly...
>
> The implementations of bdrv_co_readv and bdrv_co_writev should also
> call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The
> events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO.
>
> 2) This is also a simple forwarder function:
>
> .bdrv_create
>
> but there is no BlockDriverState argument so the forwarded-to function
> does not have a bs->file argument either. The forwarded-to function
> is bdrv_create_file.
>
> 3) These members are special
>
> .format_name is the string "raw"
> .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0
> .bdrv_close raw_close should do nothing
> .bdrv_probe raw_probe should just return 1.
>
> 4) There is another member, .create_options, which is an array of
> QEMUOptionParameter structs, terminated by an all-zero item. The only
> option you need is for the virtual disk size. You will find something
> to copy from in other block drivers, for example block/qcow2.c.
>
> 5) Formats are registered with bdrv_register (takes a BlockDriver*).
> You also need to pass the caller of bdrv_register to block_init.
>
> 6) I'm not sure how to organize the patch series, so I'll leave this to
> your creativity. I guess in this case move/copy detection of git should
> be disabled. I would definitely include this spec in the commit
> message as a proof of clean-room reverse engineering.
>
> 7) Remember a BSD header like the one in block.c.
>
> Paolo
This patch implements the email up to the paragraph ending with "100+ SLOC
roughly". The skeleton is generated from the list there, with a simple
shell loop using "sed" and the raw_foo() template.
The BSD license block is copied (and reflowed) from
"util/qemu-progress.c".
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-21 14:41:17 +04:00
|
|
|
{
|
2015-06-16 15:19:22 +03:00
|
|
|
return bdrv_get_info(bs->file->bs, bdi);
|
add skeleton for BSD licensed "raw" BlockDriver
On 08/05/13 15:03, Paolo Bonzini wrote:
>
>
> ----- Original Message -----
>> From: "Laszlo Ersek" <lersek@redhat.com>
>> To: "Paolo Bonzini" <pbonzini@redhat.com>
>> Sent: Monday, August 5, 2013 2:43:46 PM
>> Subject: Re: [PATCH 1/2] raw: add license header
>>
>> On 08/02/13 00:27, Paolo Bonzini wrote:
>>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote:
>>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote:
>>>>> Most of the block layer is under the BSD license, thus it is
>>>>> reasonable to license block/raw.c the same way. CCed people should
>>>>> ACK by replying with a Signed-off-by line.
>>>>
>>>> The coded was intended to be GPLv2.
>>>
>>> Laszlo, would you be willing to do clean-room reverse engineering?
>>>
>>> (No rants, please. :))
>>
>> What's the scope exactly?
>
> It's quite small, it's a file full of forwarders like
>
> static void raw_foo(BlockDriverState *bs)
> {
> return bdrv_foo(bs->file);
> }
>
> It's 170 lines of code, all as boring as this. I only picked you
> because I'm quite certain you have never seen the file (and the answer
> confirmed it).
>
> Basically:
>
> 1) BlockDriver is a struct in which these function members are
> interesting:
>
> .bdrv_reopen_prepare
> .bdrv_co_readv
> .bdrv_co_writev
> .bdrv_co_is_allocated
> .bdrv_co_write_zeroes
> .bdrv_co_discard
> .bdrv_getlength
> .bdrv_get_info
> .bdrv_truncate
> .bdrv_is_inserted
> .bdrv_media_changed
> .bdrv_eject
> .bdrv_lock_medium
> .bdrv_ioctl
> .bdrv_aio_ioctl
> .bdrv_has_zero_init
>
> They should be implemented as simple forwarders (see above).
> There are 16 functions listed here, you can easily see how this
> already accounts for 100+ SLOC roughly...
>
> The implementations of bdrv_co_readv and bdrv_co_writev should also
> call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The
> events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO.
>
> 2) This is also a simple forwarder function:
>
> .bdrv_create
>
> but there is no BlockDriverState argument so the forwarded-to function
> does not have a bs->file argument either. The forwarded-to function
> is bdrv_create_file.
>
> 3) These members are special
>
> .format_name is the string "raw"
> .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0
> .bdrv_close raw_close should do nothing
> .bdrv_probe raw_probe should just return 1.
>
> 4) There is another member, .create_options, which is an array of
> QEMUOptionParameter structs, terminated by an all-zero item. The only
> option you need is for the virtual disk size. You will find something
> to copy from in other block drivers, for example block/qcow2.c.
>
> 5) Formats are registered with bdrv_register (takes a BlockDriver*).
> You also need to pass the caller of bdrv_register to block_init.
>
> 6) I'm not sure how to organize the patch series, so I'll leave this to
> your creativity. I guess in this case move/copy detection of git should
> be disabled. I would definitely include this spec in the commit
> message as a proof of clean-room reverse engineering.
>
> 7) Remember a BSD header like the one in block.c.
>
> Paolo
This patch implements the email up to the paragraph ending with "100+ SLOC
roughly". The skeleton is generated from the list there, with a simple
shell loop using "sed" and the raw_foo() template.
The BSD license block is copied (and reflowed) from
"util/qemu-progress.c".
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-21 14:41:17 +04:00
|
|
|
}
|
|
|
|
|
2016-07-16 02:23:08 +03:00
|
|
|
static void raw_refresh_limits(BlockDriverState *bs, Error **errp)
|
|
|
|
{
|
|
|
|
if (bs->probed) {
|
|
|
|
/* To make it easier to protect the first sector, any probed
|
|
|
|
* image is restricted to read-modify-write on sub-sector
|
|
|
|
* operations. */
|
|
|
|
bs->bl.request_alignment = BDRV_SECTOR_SIZE;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
block: Convert .bdrv_truncate callback to coroutine_fn
bdrv_truncate() is an operation that can block (even for a quite long
time, depending on the PreallocMode) in I/O paths that shouldn't block.
Convert it to a coroutine_fn so that we have the infrastructure for
drivers to make their .bdrv_co_truncate implementation asynchronous.
This change could potentially introduce new race conditions because
bdrv_truncate() isn't necessarily executed atomically any more. Whether
this is a problem needs to be evaluated for each block driver that
supports truncate:
* file-posix/win32, gluster, iscsi, nfs, rbd, ssh, sheepdog: The
protocol drivers are trivially safe because they don't actually yield
yet, so there is no change in behaviour.
* copy-on-read, crypto, raw-format: Essentially just filter drivers that
pass the request to a child node, no problem.
* qcow2: The implementation modifies metadata, so it needs to hold
s->lock to be safe with concurrent I/O requests. In order to avoid
double locking, this requires pulling the locking out into
preallocate_co() and using qcow2_write_caches() instead of
bdrv_flush().
* qed: Does a single header update, this is fine without locking.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2018-06-21 18:54:35 +03:00
|
|
|
static int coroutine_fn raw_co_truncate(BlockDriverState *bs, int64_t offset,
|
2019-09-18 12:51:40 +03:00
|
|
|
bool exact, PreallocMode prealloc,
|
2020-04-24 15:54:39 +03:00
|
|
|
BdrvRequestFlags flags, Error **errp)
|
add skeleton for BSD licensed "raw" BlockDriver
On 08/05/13 15:03, Paolo Bonzini wrote:
>
>
> ----- Original Message -----
>> From: "Laszlo Ersek" <lersek@redhat.com>
>> To: "Paolo Bonzini" <pbonzini@redhat.com>
>> Sent: Monday, August 5, 2013 2:43:46 PM
>> Subject: Re: [PATCH 1/2] raw: add license header
>>
>> On 08/02/13 00:27, Paolo Bonzini wrote:
>>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote:
>>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote:
>>>>> Most of the block layer is under the BSD license, thus it is
>>>>> reasonable to license block/raw.c the same way. CCed people should
>>>>> ACK by replying with a Signed-off-by line.
>>>>
>>>> The coded was intended to be GPLv2.
>>>
>>> Laszlo, would you be willing to do clean-room reverse engineering?
>>>
>>> (No rants, please. :))
>>
>> What's the scope exactly?
>
> It's quite small, it's a file full of forwarders like
>
> static void raw_foo(BlockDriverState *bs)
> {
> return bdrv_foo(bs->file);
> }
>
> It's 170 lines of code, all as boring as this. I only picked you
> because I'm quite certain you have never seen the file (and the answer
> confirmed it).
>
> Basically:
>
> 1) BlockDriver is a struct in which these function members are
> interesting:
>
> .bdrv_reopen_prepare
> .bdrv_co_readv
> .bdrv_co_writev
> .bdrv_co_is_allocated
> .bdrv_co_write_zeroes
> .bdrv_co_discard
> .bdrv_getlength
> .bdrv_get_info
> .bdrv_truncate
> .bdrv_is_inserted
> .bdrv_media_changed
> .bdrv_eject
> .bdrv_lock_medium
> .bdrv_ioctl
> .bdrv_aio_ioctl
> .bdrv_has_zero_init
>
> They should be implemented as simple forwarders (see above).
> There are 16 functions listed here, you can easily see how this
> already accounts for 100+ SLOC roughly...
>
> The implementations of bdrv_co_readv and bdrv_co_writev should also
> call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The
> events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO.
>
> 2) This is also a simple forwarder function:
>
> .bdrv_create
>
> but there is no BlockDriverState argument so the forwarded-to function
> does not have a bs->file argument either. The forwarded-to function
> is bdrv_create_file.
>
> 3) These members are special
>
> .format_name is the string "raw"
> .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0
> .bdrv_close raw_close should do nothing
> .bdrv_probe raw_probe should just return 1.
>
> 4) There is another member, .create_options, which is an array of
> QEMUOptionParameter structs, terminated by an all-zero item. The only
> option you need is for the virtual disk size. You will find something
> to copy from in other block drivers, for example block/qcow2.c.
>
> 5) Formats are registered with bdrv_register (takes a BlockDriver*).
> You also need to pass the caller of bdrv_register to block_init.
>
> 6) I'm not sure how to organize the patch series, so I'll leave this to
> your creativity. I guess in this case move/copy detection of git should
> be disabled. I would definitely include this spec in the commit
> message as a proof of clean-room reverse engineering.
>
> 7) Remember a BSD header like the one in block.c.
>
> Paolo
This patch implements the email up to the paragraph ending with "100+ SLOC
roughly". The skeleton is generated from the list there, with a simple
shell loop using "sed" and the raw_foo() template.
The BSD license block is copied (and reflowed) from
"util/qemu-progress.c".
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-21 14:41:17 +04:00
|
|
|
{
|
2016-10-31 13:27:40 +03:00
|
|
|
BDRVRawState *s = bs->opaque;
|
|
|
|
|
|
|
|
if (s->has_size) {
|
2017-03-28 23:51:29 +03:00
|
|
|
error_setg(errp, "Cannot resize fixed-size raw disks");
|
2016-10-31 13:27:40 +03:00
|
|
|
return -ENOTSUP;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (INT64_MAX - offset < s->offset) {
|
2017-03-28 23:51:29 +03:00
|
|
|
error_setg(errp, "Disk size too large for the chosen offset");
|
2016-10-31 13:27:40 +03:00
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
s->size = offset;
|
|
|
|
offset += s->offset;
|
2020-04-24 15:54:43 +03:00
|
|
|
return bdrv_co_truncate(bs->file, offset, exact, prealloc, flags, errp);
|
add skeleton for BSD licensed "raw" BlockDriver
On 08/05/13 15:03, Paolo Bonzini wrote:
>
>
> ----- Original Message -----
>> From: "Laszlo Ersek" <lersek@redhat.com>
>> To: "Paolo Bonzini" <pbonzini@redhat.com>
>> Sent: Monday, August 5, 2013 2:43:46 PM
>> Subject: Re: [PATCH 1/2] raw: add license header
>>
>> On 08/02/13 00:27, Paolo Bonzini wrote:
>>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote:
>>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote:
>>>>> Most of the block layer is under the BSD license, thus it is
>>>>> reasonable to license block/raw.c the same way. CCed people should
>>>>> ACK by replying with a Signed-off-by line.
>>>>
>>>> The coded was intended to be GPLv2.
>>>
>>> Laszlo, would you be willing to do clean-room reverse engineering?
>>>
>>> (No rants, please. :))
>>
>> What's the scope exactly?
>
> It's quite small, it's a file full of forwarders like
>
> static void raw_foo(BlockDriverState *bs)
> {
> return bdrv_foo(bs->file);
> }
>
> It's 170 lines of code, all as boring as this. I only picked you
> because I'm quite certain you have never seen the file (and the answer
> confirmed it).
>
> Basically:
>
> 1) BlockDriver is a struct in which these function members are
> interesting:
>
> .bdrv_reopen_prepare
> .bdrv_co_readv
> .bdrv_co_writev
> .bdrv_co_is_allocated
> .bdrv_co_write_zeroes
> .bdrv_co_discard
> .bdrv_getlength
> .bdrv_get_info
> .bdrv_truncate
> .bdrv_is_inserted
> .bdrv_media_changed
> .bdrv_eject
> .bdrv_lock_medium
> .bdrv_ioctl
> .bdrv_aio_ioctl
> .bdrv_has_zero_init
>
> They should be implemented as simple forwarders (see above).
> There are 16 functions listed here, you can easily see how this
> already accounts for 100+ SLOC roughly...
>
> The implementations of bdrv_co_readv and bdrv_co_writev should also
> call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The
> events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO.
>
> 2) This is also a simple forwarder function:
>
> .bdrv_create
>
> but there is no BlockDriverState argument so the forwarded-to function
> does not have a bs->file argument either. The forwarded-to function
> is bdrv_create_file.
>
> 3) These members are special
>
> .format_name is the string "raw"
> .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0
> .bdrv_close raw_close should do nothing
> .bdrv_probe raw_probe should just return 1.
>
> 4) There is another member, .create_options, which is an array of
> QEMUOptionParameter structs, terminated by an all-zero item. The only
> option you need is for the virtual disk size. You will find something
> to copy from in other block drivers, for example block/qcow2.c.
>
> 5) Formats are registered with bdrv_register (takes a BlockDriver*).
> You also need to pass the caller of bdrv_register to block_init.
>
> 6) I'm not sure how to organize the patch series, so I'll leave this to
> your creativity. I guess in this case move/copy detection of git should
> be disabled. I would definitely include this spec in the commit
> message as a proof of clean-room reverse engineering.
>
> 7) Remember a BSD header like the one in block.c.
>
> Paolo
This patch implements the email up to the paragraph ending with "100+ SLOC
roughly". The skeleton is generated from the list there, with a simple
shell loop using "sed" and the raw_foo() template.
The BSD license block is copied (and reflowed) from
"util/qemu-progress.c".
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-21 14:41:17 +04:00
|
|
|
}
|
|
|
|
|
2013-08-21 14:41:23 +04:00
|
|
|
static void raw_eject(BlockDriverState *bs, bool eject_flag)
|
add skeleton for BSD licensed "raw" BlockDriver
On 08/05/13 15:03, Paolo Bonzini wrote:
>
>
> ----- Original Message -----
>> From: "Laszlo Ersek" <lersek@redhat.com>
>> To: "Paolo Bonzini" <pbonzini@redhat.com>
>> Sent: Monday, August 5, 2013 2:43:46 PM
>> Subject: Re: [PATCH 1/2] raw: add license header
>>
>> On 08/02/13 00:27, Paolo Bonzini wrote:
>>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote:
>>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote:
>>>>> Most of the block layer is under the BSD license, thus it is
>>>>> reasonable to license block/raw.c the same way. CCed people should
>>>>> ACK by replying with a Signed-off-by line.
>>>>
>>>> The coded was intended to be GPLv2.
>>>
>>> Laszlo, would you be willing to do clean-room reverse engineering?
>>>
>>> (No rants, please. :))
>>
>> What's the scope exactly?
>
> It's quite small, it's a file full of forwarders like
>
> static void raw_foo(BlockDriverState *bs)
> {
> return bdrv_foo(bs->file);
> }
>
> It's 170 lines of code, all as boring as this. I only picked you
> because I'm quite certain you have never seen the file (and the answer
> confirmed it).
>
> Basically:
>
> 1) BlockDriver is a struct in which these function members are
> interesting:
>
> .bdrv_reopen_prepare
> .bdrv_co_readv
> .bdrv_co_writev
> .bdrv_co_is_allocated
> .bdrv_co_write_zeroes
> .bdrv_co_discard
> .bdrv_getlength
> .bdrv_get_info
> .bdrv_truncate
> .bdrv_is_inserted
> .bdrv_media_changed
> .bdrv_eject
> .bdrv_lock_medium
> .bdrv_ioctl
> .bdrv_aio_ioctl
> .bdrv_has_zero_init
>
> They should be implemented as simple forwarders (see above).
> There are 16 functions listed here, you can easily see how this
> already accounts for 100+ SLOC roughly...
>
> The implementations of bdrv_co_readv and bdrv_co_writev should also
> call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The
> events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO.
>
> 2) This is also a simple forwarder function:
>
> .bdrv_create
>
> but there is no BlockDriverState argument so the forwarded-to function
> does not have a bs->file argument either. The forwarded-to function
> is bdrv_create_file.
>
> 3) These members are special
>
> .format_name is the string "raw"
> .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0
> .bdrv_close raw_close should do nothing
> .bdrv_probe raw_probe should just return 1.
>
> 4) There is another member, .create_options, which is an array of
> QEMUOptionParameter structs, terminated by an all-zero item. The only
> option you need is for the virtual disk size. You will find something
> to copy from in other block drivers, for example block/qcow2.c.
>
> 5) Formats are registered with bdrv_register (takes a BlockDriver*).
> You also need to pass the caller of bdrv_register to block_init.
>
> 6) I'm not sure how to organize the patch series, so I'll leave this to
> your creativity. I guess in this case move/copy detection of git should
> be disabled. I would definitely include this spec in the commit
> message as a proof of clean-room reverse engineering.
>
> 7) Remember a BSD header like the one in block.c.
>
> Paolo
This patch implements the email up to the paragraph ending with "100+ SLOC
roughly". The skeleton is generated from the list there, with a simple
shell loop using "sed" and the raw_foo() template.
The BSD license block is copied (and reflowed) from
"util/qemu-progress.c".
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-21 14:41:17 +04:00
|
|
|
{
|
2015-06-16 15:19:22 +03:00
|
|
|
bdrv_eject(bs->file->bs, eject_flag);
|
add skeleton for BSD licensed "raw" BlockDriver
On 08/05/13 15:03, Paolo Bonzini wrote:
>
>
> ----- Original Message -----
>> From: "Laszlo Ersek" <lersek@redhat.com>
>> To: "Paolo Bonzini" <pbonzini@redhat.com>
>> Sent: Monday, August 5, 2013 2:43:46 PM
>> Subject: Re: [PATCH 1/2] raw: add license header
>>
>> On 08/02/13 00:27, Paolo Bonzini wrote:
>>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote:
>>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote:
>>>>> Most of the block layer is under the BSD license, thus it is
>>>>> reasonable to license block/raw.c the same way. CCed people should
>>>>> ACK by replying with a Signed-off-by line.
>>>>
>>>> The coded was intended to be GPLv2.
>>>
>>> Laszlo, would you be willing to do clean-room reverse engineering?
>>>
>>> (No rants, please. :))
>>
>> What's the scope exactly?
>
> It's quite small, it's a file full of forwarders like
>
> static void raw_foo(BlockDriverState *bs)
> {
> return bdrv_foo(bs->file);
> }
>
> It's 170 lines of code, all as boring as this. I only picked you
> because I'm quite certain you have never seen the file (and the answer
> confirmed it).
>
> Basically:
>
> 1) BlockDriver is a struct in which these function members are
> interesting:
>
> .bdrv_reopen_prepare
> .bdrv_co_readv
> .bdrv_co_writev
> .bdrv_co_is_allocated
> .bdrv_co_write_zeroes
> .bdrv_co_discard
> .bdrv_getlength
> .bdrv_get_info
> .bdrv_truncate
> .bdrv_is_inserted
> .bdrv_media_changed
> .bdrv_eject
> .bdrv_lock_medium
> .bdrv_ioctl
> .bdrv_aio_ioctl
> .bdrv_has_zero_init
>
> They should be implemented as simple forwarders (see above).
> There are 16 functions listed here, you can easily see how this
> already accounts for 100+ SLOC roughly...
>
> The implementations of bdrv_co_readv and bdrv_co_writev should also
> call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The
> events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO.
>
> 2) This is also a simple forwarder function:
>
> .bdrv_create
>
> but there is no BlockDriverState argument so the forwarded-to function
> does not have a bs->file argument either. The forwarded-to function
> is bdrv_create_file.
>
> 3) These members are special
>
> .format_name is the string "raw"
> .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0
> .bdrv_close raw_close should do nothing
> .bdrv_probe raw_probe should just return 1.
>
> 4) There is another member, .create_options, which is an array of
> QEMUOptionParameter structs, terminated by an all-zero item. The only
> option you need is for the virtual disk size. You will find something
> to copy from in other block drivers, for example block/qcow2.c.
>
> 5) Formats are registered with bdrv_register (takes a BlockDriver*).
> You also need to pass the caller of bdrv_register to block_init.
>
> 6) I'm not sure how to organize the patch series, so I'll leave this to
> your creativity. I guess in this case move/copy detection of git should
> be disabled. I would definitely include this spec in the commit
> message as a proof of clean-room reverse engineering.
>
> 7) Remember a BSD header like the one in block.c.
>
> Paolo
This patch implements the email up to the paragraph ending with "100+ SLOC
roughly". The skeleton is generated from the list there, with a simple
shell loop using "sed" and the raw_foo() template.
The BSD license block is copied (and reflowed) from
"util/qemu-progress.c".
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-21 14:41:17 +04:00
|
|
|
}
|
|
|
|
|
2013-08-21 14:41:23 +04:00
|
|
|
static void raw_lock_medium(BlockDriverState *bs, bool locked)
|
add skeleton for BSD licensed "raw" BlockDriver
On 08/05/13 15:03, Paolo Bonzini wrote:
>
>
> ----- Original Message -----
>> From: "Laszlo Ersek" <lersek@redhat.com>
>> To: "Paolo Bonzini" <pbonzini@redhat.com>
>> Sent: Monday, August 5, 2013 2:43:46 PM
>> Subject: Re: [PATCH 1/2] raw: add license header
>>
>> On 08/02/13 00:27, Paolo Bonzini wrote:
>>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote:
>>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote:
>>>>> Most of the block layer is under the BSD license, thus it is
>>>>> reasonable to license block/raw.c the same way. CCed people should
>>>>> ACK by replying with a Signed-off-by line.
>>>>
>>>> The coded was intended to be GPLv2.
>>>
>>> Laszlo, would you be willing to do clean-room reverse engineering?
>>>
>>> (No rants, please. :))
>>
>> What's the scope exactly?
>
> It's quite small, it's a file full of forwarders like
>
> static void raw_foo(BlockDriverState *bs)
> {
> return bdrv_foo(bs->file);
> }
>
> It's 170 lines of code, all as boring as this. I only picked you
> because I'm quite certain you have never seen the file (and the answer
> confirmed it).
>
> Basically:
>
> 1) BlockDriver is a struct in which these function members are
> interesting:
>
> .bdrv_reopen_prepare
> .bdrv_co_readv
> .bdrv_co_writev
> .bdrv_co_is_allocated
> .bdrv_co_write_zeroes
> .bdrv_co_discard
> .bdrv_getlength
> .bdrv_get_info
> .bdrv_truncate
> .bdrv_is_inserted
> .bdrv_media_changed
> .bdrv_eject
> .bdrv_lock_medium
> .bdrv_ioctl
> .bdrv_aio_ioctl
> .bdrv_has_zero_init
>
> They should be implemented as simple forwarders (see above).
> There are 16 functions listed here, you can easily see how this
> already accounts for 100+ SLOC roughly...
>
> The implementations of bdrv_co_readv and bdrv_co_writev should also
> call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The
> events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO.
>
> 2) This is also a simple forwarder function:
>
> .bdrv_create
>
> but there is no BlockDriverState argument so the forwarded-to function
> does not have a bs->file argument either. The forwarded-to function
> is bdrv_create_file.
>
> 3) These members are special
>
> .format_name is the string "raw"
> .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0
> .bdrv_close raw_close should do nothing
> .bdrv_probe raw_probe should just return 1.
>
> 4) There is another member, .create_options, which is an array of
> QEMUOptionParameter structs, terminated by an all-zero item. The only
> option you need is for the virtual disk size. You will find something
> to copy from in other block drivers, for example block/qcow2.c.
>
> 5) Formats are registered with bdrv_register (takes a BlockDriver*).
> You also need to pass the caller of bdrv_register to block_init.
>
> 6) I'm not sure how to organize the patch series, so I'll leave this to
> your creativity. I guess in this case move/copy detection of git should
> be disabled. I would definitely include this spec in the commit
> message as a proof of clean-room reverse engineering.
>
> 7) Remember a BSD header like the one in block.c.
>
> Paolo
This patch implements the email up to the paragraph ending with "100+ SLOC
roughly". The skeleton is generated from the list there, with a simple
shell loop using "sed" and the raw_foo() template.
The BSD license block is copied (and reflowed) from
"util/qemu-progress.c".
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-21 14:41:17 +04:00
|
|
|
{
|
2015-06-16 15:19:22 +03:00
|
|
|
bdrv_lock_medium(bs->file->bs, locked);
|
add skeleton for BSD licensed "raw" BlockDriver
On 08/05/13 15:03, Paolo Bonzini wrote:
>
>
> ----- Original Message -----
>> From: "Laszlo Ersek" <lersek@redhat.com>
>> To: "Paolo Bonzini" <pbonzini@redhat.com>
>> Sent: Monday, August 5, 2013 2:43:46 PM
>> Subject: Re: [PATCH 1/2] raw: add license header
>>
>> On 08/02/13 00:27, Paolo Bonzini wrote:
>>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote:
>>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote:
>>>>> Most of the block layer is under the BSD license, thus it is
>>>>> reasonable to license block/raw.c the same way. CCed people should
>>>>> ACK by replying with a Signed-off-by line.
>>>>
>>>> The coded was intended to be GPLv2.
>>>
>>> Laszlo, would you be willing to do clean-room reverse engineering?
>>>
>>> (No rants, please. :))
>>
>> What's the scope exactly?
>
> It's quite small, it's a file full of forwarders like
>
> static void raw_foo(BlockDriverState *bs)
> {
> return bdrv_foo(bs->file);
> }
>
> It's 170 lines of code, all as boring as this. I only picked you
> because I'm quite certain you have never seen the file (and the answer
> confirmed it).
>
> Basically:
>
> 1) BlockDriver is a struct in which these function members are
> interesting:
>
> .bdrv_reopen_prepare
> .bdrv_co_readv
> .bdrv_co_writev
> .bdrv_co_is_allocated
> .bdrv_co_write_zeroes
> .bdrv_co_discard
> .bdrv_getlength
> .bdrv_get_info
> .bdrv_truncate
> .bdrv_is_inserted
> .bdrv_media_changed
> .bdrv_eject
> .bdrv_lock_medium
> .bdrv_ioctl
> .bdrv_aio_ioctl
> .bdrv_has_zero_init
>
> They should be implemented as simple forwarders (see above).
> There are 16 functions listed here, you can easily see how this
> already accounts for 100+ SLOC roughly...
>
> The implementations of bdrv_co_readv and bdrv_co_writev should also
> call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The
> events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO.
>
> 2) This is also a simple forwarder function:
>
> .bdrv_create
>
> but there is no BlockDriverState argument so the forwarded-to function
> does not have a bs->file argument either. The forwarded-to function
> is bdrv_create_file.
>
> 3) These members are special
>
> .format_name is the string "raw"
> .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0
> .bdrv_close raw_close should do nothing
> .bdrv_probe raw_probe should just return 1.
>
> 4) There is another member, .create_options, which is an array of
> QEMUOptionParameter structs, terminated by an all-zero item. The only
> option you need is for the virtual disk size. You will find something
> to copy from in other block drivers, for example block/qcow2.c.
>
> 5) Formats are registered with bdrv_register (takes a BlockDriver*).
> You also need to pass the caller of bdrv_register to block_init.
>
> 6) I'm not sure how to organize the patch series, so I'll leave this to
> your creativity. I guess in this case move/copy detection of git should
> be disabled. I would definitely include this spec in the commit
> message as a proof of clean-room reverse engineering.
>
> 7) Remember a BSD header like the one in block.c.
>
> Paolo
This patch implements the email up to the paragraph ending with "100+ SLOC
roughly". The skeleton is generated from the list there, with a simple
shell loop using "sed" and the raw_foo() template.
The BSD license block is copied (and reflowed) from
"util/qemu-progress.c".
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-21 14:41:17 +04:00
|
|
|
}
|
|
|
|
|
2016-10-20 16:09:36 +03:00
|
|
|
static int raw_co_ioctl(BlockDriverState *bs, unsigned long int req, void *buf)
|
add skeleton for BSD licensed "raw" BlockDriver
On 08/05/13 15:03, Paolo Bonzini wrote:
>
>
> ----- Original Message -----
>> From: "Laszlo Ersek" <lersek@redhat.com>
>> To: "Paolo Bonzini" <pbonzini@redhat.com>
>> Sent: Monday, August 5, 2013 2:43:46 PM
>> Subject: Re: [PATCH 1/2] raw: add license header
>>
>> On 08/02/13 00:27, Paolo Bonzini wrote:
>>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote:
>>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote:
>>>>> Most of the block layer is under the BSD license, thus it is
>>>>> reasonable to license block/raw.c the same way. CCed people should
>>>>> ACK by replying with a Signed-off-by line.
>>>>
>>>> The coded was intended to be GPLv2.
>>>
>>> Laszlo, would you be willing to do clean-room reverse engineering?
>>>
>>> (No rants, please. :))
>>
>> What's the scope exactly?
>
> It's quite small, it's a file full of forwarders like
>
> static void raw_foo(BlockDriverState *bs)
> {
> return bdrv_foo(bs->file);
> }
>
> It's 170 lines of code, all as boring as this. I only picked you
> because I'm quite certain you have never seen the file (and the answer
> confirmed it).
>
> Basically:
>
> 1) BlockDriver is a struct in which these function members are
> interesting:
>
> .bdrv_reopen_prepare
> .bdrv_co_readv
> .bdrv_co_writev
> .bdrv_co_is_allocated
> .bdrv_co_write_zeroes
> .bdrv_co_discard
> .bdrv_getlength
> .bdrv_get_info
> .bdrv_truncate
> .bdrv_is_inserted
> .bdrv_media_changed
> .bdrv_eject
> .bdrv_lock_medium
> .bdrv_ioctl
> .bdrv_aio_ioctl
> .bdrv_has_zero_init
>
> They should be implemented as simple forwarders (see above).
> There are 16 functions listed here, you can easily see how this
> already accounts for 100+ SLOC roughly...
>
> The implementations of bdrv_co_readv and bdrv_co_writev should also
> call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The
> events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO.
>
> 2) This is also a simple forwarder function:
>
> .bdrv_create
>
> but there is no BlockDriverState argument so the forwarded-to function
> does not have a bs->file argument either. The forwarded-to function
> is bdrv_create_file.
>
> 3) These members are special
>
> .format_name is the string "raw"
> .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0
> .bdrv_close raw_close should do nothing
> .bdrv_probe raw_probe should just return 1.
>
> 4) There is another member, .create_options, which is an array of
> QEMUOptionParameter structs, terminated by an all-zero item. The only
> option you need is for the virtual disk size. You will find something
> to copy from in other block drivers, for example block/qcow2.c.
>
> 5) Formats are registered with bdrv_register (takes a BlockDriver*).
> You also need to pass the caller of bdrv_register to block_init.
>
> 6) I'm not sure how to organize the patch series, so I'll leave this to
> your creativity. I guess in this case move/copy detection of git should
> be disabled. I would definitely include this spec in the commit
> message as a proof of clean-room reverse engineering.
>
> 7) Remember a BSD header like the one in block.c.
>
> Paolo
This patch implements the email up to the paragraph ending with "100+ SLOC
roughly". The skeleton is generated from the list there, with a simple
shell loop using "sed" and the raw_foo() template.
The BSD license block is copied (and reflowed) from
"util/qemu-progress.c".
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-21 14:41:17 +04:00
|
|
|
{
|
2016-10-31 13:27:40 +03:00
|
|
|
BDRVRawState *s = bs->opaque;
|
|
|
|
if (s->offset || s->has_size) {
|
|
|
|
return -ENOTSUP;
|
|
|
|
}
|
2016-10-20 16:09:36 +03:00
|
|
|
return bdrv_co_ioctl(bs->file->bs, req, buf);
|
add skeleton for BSD licensed "raw" BlockDriver
On 08/05/13 15:03, Paolo Bonzini wrote:
>
>
> ----- Original Message -----
>> From: "Laszlo Ersek" <lersek@redhat.com>
>> To: "Paolo Bonzini" <pbonzini@redhat.com>
>> Sent: Monday, August 5, 2013 2:43:46 PM
>> Subject: Re: [PATCH 1/2] raw: add license header
>>
>> On 08/02/13 00:27, Paolo Bonzini wrote:
>>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote:
>>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote:
>>>>> Most of the block layer is under the BSD license, thus it is
>>>>> reasonable to license block/raw.c the same way. CCed people should
>>>>> ACK by replying with a Signed-off-by line.
>>>>
>>>> The coded was intended to be GPLv2.
>>>
>>> Laszlo, would you be willing to do clean-room reverse engineering?
>>>
>>> (No rants, please. :))
>>
>> What's the scope exactly?
>
> It's quite small, it's a file full of forwarders like
>
> static void raw_foo(BlockDriverState *bs)
> {
> return bdrv_foo(bs->file);
> }
>
> It's 170 lines of code, all as boring as this. I only picked you
> because I'm quite certain you have never seen the file (and the answer
> confirmed it).
>
> Basically:
>
> 1) BlockDriver is a struct in which these function members are
> interesting:
>
> .bdrv_reopen_prepare
> .bdrv_co_readv
> .bdrv_co_writev
> .bdrv_co_is_allocated
> .bdrv_co_write_zeroes
> .bdrv_co_discard
> .bdrv_getlength
> .bdrv_get_info
> .bdrv_truncate
> .bdrv_is_inserted
> .bdrv_media_changed
> .bdrv_eject
> .bdrv_lock_medium
> .bdrv_ioctl
> .bdrv_aio_ioctl
> .bdrv_has_zero_init
>
> They should be implemented as simple forwarders (see above).
> There are 16 functions listed here, you can easily see how this
> already accounts for 100+ SLOC roughly...
>
> The implementations of bdrv_co_readv and bdrv_co_writev should also
> call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The
> events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO.
>
> 2) This is also a simple forwarder function:
>
> .bdrv_create
>
> but there is no BlockDriverState argument so the forwarded-to function
> does not have a bs->file argument either. The forwarded-to function
> is bdrv_create_file.
>
> 3) These members are special
>
> .format_name is the string "raw"
> .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0
> .bdrv_close raw_close should do nothing
> .bdrv_probe raw_probe should just return 1.
>
> 4) There is another member, .create_options, which is an array of
> QEMUOptionParameter structs, terminated by an all-zero item. The only
> option you need is for the virtual disk size. You will find something
> to copy from in other block drivers, for example block/qcow2.c.
>
> 5) Formats are registered with bdrv_register (takes a BlockDriver*).
> You also need to pass the caller of bdrv_register to block_init.
>
> 6) I'm not sure how to organize the patch series, so I'll leave this to
> your creativity. I guess in this case move/copy detection of git should
> be disabled. I would definitely include this spec in the commit
> message as a proof of clean-room reverse engineering.
>
> 7) Remember a BSD header like the one in block.c.
>
> Paolo
This patch implements the email up to the paragraph ending with "100+ SLOC
roughly". The skeleton is generated from the list there, with a simple
shell loop using "sed" and the raw_foo() template.
The BSD license block is copied (and reflowed) from
"util/qemu-progress.c".
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-21 14:41:17 +04:00
|
|
|
}
|
|
|
|
|
2013-08-21 14:41:23 +04:00
|
|
|
static int raw_has_zero_init(BlockDriverState *bs)
|
add skeleton for BSD licensed "raw" BlockDriver
On 08/05/13 15:03, Paolo Bonzini wrote:
>
>
> ----- Original Message -----
>> From: "Laszlo Ersek" <lersek@redhat.com>
>> To: "Paolo Bonzini" <pbonzini@redhat.com>
>> Sent: Monday, August 5, 2013 2:43:46 PM
>> Subject: Re: [PATCH 1/2] raw: add license header
>>
>> On 08/02/13 00:27, Paolo Bonzini wrote:
>>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote:
>>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote:
>>>>> Most of the block layer is under the BSD license, thus it is
>>>>> reasonable to license block/raw.c the same way. CCed people should
>>>>> ACK by replying with a Signed-off-by line.
>>>>
>>>> The coded was intended to be GPLv2.
>>>
>>> Laszlo, would you be willing to do clean-room reverse engineering?
>>>
>>> (No rants, please. :))
>>
>> What's the scope exactly?
>
> It's quite small, it's a file full of forwarders like
>
> static void raw_foo(BlockDriverState *bs)
> {
> return bdrv_foo(bs->file);
> }
>
> It's 170 lines of code, all as boring as this. I only picked you
> because I'm quite certain you have never seen the file (and the answer
> confirmed it).
>
> Basically:
>
> 1) BlockDriver is a struct in which these function members are
> interesting:
>
> .bdrv_reopen_prepare
> .bdrv_co_readv
> .bdrv_co_writev
> .bdrv_co_is_allocated
> .bdrv_co_write_zeroes
> .bdrv_co_discard
> .bdrv_getlength
> .bdrv_get_info
> .bdrv_truncate
> .bdrv_is_inserted
> .bdrv_media_changed
> .bdrv_eject
> .bdrv_lock_medium
> .bdrv_ioctl
> .bdrv_aio_ioctl
> .bdrv_has_zero_init
>
> They should be implemented as simple forwarders (see above).
> There are 16 functions listed here, you can easily see how this
> already accounts for 100+ SLOC roughly...
>
> The implementations of bdrv_co_readv and bdrv_co_writev should also
> call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The
> events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO.
>
> 2) This is also a simple forwarder function:
>
> .bdrv_create
>
> but there is no BlockDriverState argument so the forwarded-to function
> does not have a bs->file argument either. The forwarded-to function
> is bdrv_create_file.
>
> 3) These members are special
>
> .format_name is the string "raw"
> .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0
> .bdrv_close raw_close should do nothing
> .bdrv_probe raw_probe should just return 1.
>
> 4) There is another member, .create_options, which is an array of
> QEMUOptionParameter structs, terminated by an all-zero item. The only
> option you need is for the virtual disk size. You will find something
> to copy from in other block drivers, for example block/qcow2.c.
>
> 5) Formats are registered with bdrv_register (takes a BlockDriver*).
> You also need to pass the caller of bdrv_register to block_init.
>
> 6) I'm not sure how to organize the patch series, so I'll leave this to
> your creativity. I guess in this case move/copy detection of git should
> be disabled. I would definitely include this spec in the commit
> message as a proof of clean-room reverse engineering.
>
> 7) Remember a BSD header like the one in block.c.
>
> Paolo
This patch implements the email up to the paragraph ending with "100+ SLOC
roughly". The skeleton is generated from the list there, with a simple
shell loop using "sed" and the raw_foo() template.
The BSD license block is copied (and reflowed) from
"util/qemu-progress.c".
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-21 14:41:17 +04:00
|
|
|
{
|
2015-06-16 15:19:22 +03:00
|
|
|
return bdrv_has_zero_init(bs->file->bs);
|
add skeleton for BSD licensed "raw" BlockDriver
On 08/05/13 15:03, Paolo Bonzini wrote:
>
>
> ----- Original Message -----
>> From: "Laszlo Ersek" <lersek@redhat.com>
>> To: "Paolo Bonzini" <pbonzini@redhat.com>
>> Sent: Monday, August 5, 2013 2:43:46 PM
>> Subject: Re: [PATCH 1/2] raw: add license header
>>
>> On 08/02/13 00:27, Paolo Bonzini wrote:
>>> On 08/01/2013 10:13 AM, Christoph Hellwig wrote:
>>>> On Wed, Jul 31, 2013 at 08:19:51AM +0200, Paolo Bonzini wrote:
>>>>> Most of the block layer is under the BSD license, thus it is
>>>>> reasonable to license block/raw.c the same way. CCed people should
>>>>> ACK by replying with a Signed-off-by line.
>>>>
>>>> The coded was intended to be GPLv2.
>>>
>>> Laszlo, would you be willing to do clean-room reverse engineering?
>>>
>>> (No rants, please. :))
>>
>> What's the scope exactly?
>
> It's quite small, it's a file full of forwarders like
>
> static void raw_foo(BlockDriverState *bs)
> {
> return bdrv_foo(bs->file);
> }
>
> It's 170 lines of code, all as boring as this. I only picked you
> because I'm quite certain you have never seen the file (and the answer
> confirmed it).
>
> Basically:
>
> 1) BlockDriver is a struct in which these function members are
> interesting:
>
> .bdrv_reopen_prepare
> .bdrv_co_readv
> .bdrv_co_writev
> .bdrv_co_is_allocated
> .bdrv_co_write_zeroes
> .bdrv_co_discard
> .bdrv_getlength
> .bdrv_get_info
> .bdrv_truncate
> .bdrv_is_inserted
> .bdrv_media_changed
> .bdrv_eject
> .bdrv_lock_medium
> .bdrv_ioctl
> .bdrv_aio_ioctl
> .bdrv_has_zero_init
>
> They should be implemented as simple forwarders (see above).
> There are 16 functions listed here, you can easily see how this
> already accounts for 100+ SLOC roughly...
>
> The implementations of bdrv_co_readv and bdrv_co_writev should also
> call BLKDBG_EVENT on bs->file too, before forwarding to bs->file. The
> events to be generated are BLKDBG_READ_AIO and BLKDBG_WRITE_AIO.
>
> 2) This is also a simple forwarder function:
>
> .bdrv_create
>
> but there is no BlockDriverState argument so the forwarded-to function
> does not have a bs->file argument either. The forwarded-to function
> is bdrv_create_file.
>
> 3) These members are special
>
> .format_name is the string "raw"
> .bdrv_open raw_open should set bs->sg to bs->file->sg and return 0
> .bdrv_close raw_close should do nothing
> .bdrv_probe raw_probe should just return 1.
>
> 4) There is another member, .create_options, which is an array of
> QEMUOptionParameter structs, terminated by an all-zero item. The only
> option you need is for the virtual disk size. You will find something
> to copy from in other block drivers, for example block/qcow2.c.
>
> 5) Formats are registered with bdrv_register (takes a BlockDriver*).
> You also need to pass the caller of bdrv_register to block_init.
>
> 6) I'm not sure how to organize the patch series, so I'll leave this to
> your creativity. I guess in this case move/copy detection of git should
> be disabled. I would definitely include this spec in the commit
> message as a proof of clean-room reverse engineering.
>
> 7) Remember a BSD header like the one in block.c.
>
> Paolo
This patch implements the email up to the paragraph ending with "100+ SLOC
roughly". The skeleton is generated from the list there, with a simple
shell loop using "sed" and the raw_foo() template.
The BSD license block is copied (and reflowed) from
"util/qemu-progress.c".
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-21 14:41:17 +04:00
|
|
|
}
|
|
|
|
|
2020-03-26 04:12:17 +03:00
|
|
|
static int coroutine_fn raw_co_create_opts(BlockDriver *drv,
|
|
|
|
const char *filename,
|
|
|
|
QemuOpts *opts,
|
2018-01-18 15:43:45 +03:00
|
|
|
Error **errp)
|
2013-08-21 14:41:19 +04:00
|
|
|
{
|
2016-06-14 00:57:58 +03:00
|
|
|
return bdrv_create_file(filename, opts, errp);
|
2013-08-21 14:41:19 +04:00
|
|
|
}
|
2013-08-21 14:41:20 +04:00
|
|
|
|
2013-09-05 16:22:29 +04:00
|
|
|
static int raw_open(BlockDriverState *bs, QDict *options, int flags,
|
|
|
|
Error **errp)
|
2013-08-21 14:41:20 +04:00
|
|
|
{
|
2016-10-31 13:27:40 +03:00
|
|
|
BDRVRawState *s = bs->opaque;
|
2020-05-13 14:05:30 +03:00
|
|
|
bool has_size;
|
|
|
|
uint64_t offset, size;
|
2020-05-13 14:05:37 +03:00
|
|
|
BdrvChildRole file_role;
|
2016-10-31 13:27:40 +03:00
|
|
|
int ret;
|
|
|
|
|
2020-05-13 14:05:30 +03:00
|
|
|
ret = raw_read_options(options, &offset, &has_size, &size, errp);
|
|
|
|
if (ret < 0) {
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2020-05-13 14:05:37 +03:00
|
|
|
/*
|
|
|
|
* Without offset and a size limit, this driver behaves very much
|
|
|
|
* like a filter. With any such limit, it does not.
|
|
|
|
*/
|
|
|
|
if (offset || has_size) {
|
|
|
|
file_role = BDRV_CHILD_DATA | BDRV_CHILD_PRIMARY;
|
|
|
|
} else {
|
|
|
|
file_role = BDRV_CHILD_FILTERED | BDRV_CHILD_PRIMARY;
|
|
|
|
}
|
|
|
|
|
|
|
|
bs->file = bdrv_open_child(NULL, options, "file", bs, &child_of_bds,
|
|
|
|
file_role, false, errp);
|
2016-12-16 20:52:37 +03:00
|
|
|
if (!bs->file) {
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
2015-06-16 15:19:22 +03:00
|
|
|
bs->sg = bs->file->bs->sg;
|
2018-04-21 16:29:26 +03:00
|
|
|
bs->supported_write_flags = BDRV_REQ_WRITE_UNCHANGED |
|
|
|
|
(BDRV_REQ_FUA & bs->file->bs->supported_write_flags);
|
|
|
|
bs->supported_zero_flags = BDRV_REQ_WRITE_UNCHANGED |
|
2019-03-22 15:42:39 +03:00
|
|
|
((BDRV_REQ_FUA | BDRV_REQ_MAY_UNMAP | BDRV_REQ_NO_FALLBACK) &
|
2018-04-21 16:29:26 +03:00
|
|
|
bs->file->bs->supported_zero_flags);
|
2020-04-24 15:54:43 +03:00
|
|
|
bs->supported_truncate_flags = bs->file->bs->supported_truncate_flags &
|
|
|
|
BDRV_REQ_ZERO_WRITE;
|
raw: Prohibit dangerous writes for probed images
If the user neglects to specify the image format, QEMU probes the
image to guess it automatically, for convenience.
Relying on format probing is insecure for raw images (CVE-2008-2004).
If the guest writes a suitable header to the device, the next probe
will recognize a format chosen by the guest. A malicious guest can
abuse this to gain access to host files, e.g. by crafting a QCOW2
header with backing file /etc/shadow.
Commit 1e72d3b (April 2008) provided -drive parameter format to let
users disable probing. Commit f965509 (March 2009) extended QCOW2 to
optionally store the backing file format, to let users disable backing
file probing. QED has had a flag to suppress probing since the
beginning (2010), set whenever a raw backing file is assigned.
All of these additions that allow to avoid format probing have to be
specified explicitly. The default still allows the attack.
In order to fix this, commit 79368c8 (July 2010) put probed raw images
in a restricted mode, in which they wouldn't be able to overwrite the
first few bytes of the image so that they would identify as a different
image. If a write to the first sector would write one of the signatures
of another driver, qemu would instead zero out the first four bytes.
This patch was later reverted in commit 8b33d9e (September 2010) because
it didn't get the handling of unaligned qiov members right.
Today's block layer that is based on coroutines and has qiov utility
functions makes it much easier to get this functionality right, so this
patch implements it.
The other differences of this patch to the old one are that it doesn't
silently write something different than the guest requested by zeroing
out some bytes (it fails the request instead) and that it doesn't
maintain a list of signatures in the raw driver (it calls the usual
probe function instead).
Note that this change doesn't introduce new breakage for false positive
cases where the guest legitimately writes data into the first sector
that matches the signatures of an image format (e.g. for nested virt):
These cases were broken before, only the failure mode changes from
corruption after the next restart (when the wrong format is probed) to
failing the problematic write request.
Also note that like in the original patch, the restrictions only apply
if the image format has been guessed by probing. Explicitly specifying a
format allows guests to write anything they like.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1416497234-29880-8-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-11-20 18:27:12 +03:00
|
|
|
|
|
|
|
if (bs->probed && !bdrv_is_read_only(bs)) {
|
block: Use bdrv_refresh_filename() to pull
Before this patch, bdrv_refresh_filename() is used in a pushing manner:
Whenever the BDS graph is modified, the parents of the modified edges
are supposed to be updated (recursively upwards). However, that is
nonviable, considering that we want child changes not to concern
parents.
Also, in the long run we want a pull model anyway: Here, we would have a
bdrv_filename() function which returns a BDS's filename, freshly
constructed.
This patch is an intermediate step. It adds bdrv_refresh_filename()
calls before every place a BDS.filename value is used. The only
exceptions are protocol drivers that use their own filename, which
clearly would not profit from refreshing that filename before.
Also, bdrv_get_encrypted_filename() is removed along the way (as a user
of BDS.filename), since it is completely unused.
In turn, all of the calls to bdrv_refresh_filename() before this patch
are removed, because we no longer have to call this function on graph
changes.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190201192935.18394-2-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-02-01 22:29:05 +03:00
|
|
|
bdrv_refresh_filename(bs->file->bs);
|
raw: Prohibit dangerous writes for probed images
If the user neglects to specify the image format, QEMU probes the
image to guess it automatically, for convenience.
Relying on format probing is insecure for raw images (CVE-2008-2004).
If the guest writes a suitable header to the device, the next probe
will recognize a format chosen by the guest. A malicious guest can
abuse this to gain access to host files, e.g. by crafting a QCOW2
header with backing file /etc/shadow.
Commit 1e72d3b (April 2008) provided -drive parameter format to let
users disable probing. Commit f965509 (March 2009) extended QCOW2 to
optionally store the backing file format, to let users disable backing
file probing. QED has had a flag to suppress probing since the
beginning (2010), set whenever a raw backing file is assigned.
All of these additions that allow to avoid format probing have to be
specified explicitly. The default still allows the attack.
In order to fix this, commit 79368c8 (July 2010) put probed raw images
in a restricted mode, in which they wouldn't be able to overwrite the
first few bytes of the image so that they would identify as a different
image. If a write to the first sector would write one of the signatures
of another driver, qemu would instead zero out the first four bytes.
This patch was later reverted in commit 8b33d9e (September 2010) because
it didn't get the handling of unaligned qiov members right.
Today's block layer that is based on coroutines and has qiov utility
functions makes it much easier to get this functionality right, so this
patch implements it.
The other differences of this patch to the old one are that it doesn't
silently write something different than the guest requested by zeroing
out some bytes (it fails the request instead) and that it doesn't
maintain a list of signatures in the raw driver (it calls the usual
probe function instead).
Note that this change doesn't introduce new breakage for false positive
cases where the guest legitimately writes data into the first sector
that matches the signatures of an image format (e.g. for nested virt):
These cases were broken before, only the failure mode changes from
corruption after the next restart (when the wrong format is probed) to
failing the problematic write request.
Also note that like in the original patch, the restrictions only apply
if the image format has been guessed by probing. Explicitly specifying a
format allows guests to write anything they like.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1416497234-29880-8-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-11-20 18:27:12 +03:00
|
|
|
fprintf(stderr,
|
|
|
|
"WARNING: Image format was not specified for '%s' and probing "
|
|
|
|
"guessed raw.\n"
|
|
|
|
" Automatically detecting the format is dangerous for "
|
|
|
|
"raw images, write operations on block 0 will be restricted.\n"
|
|
|
|
" Specify the 'raw' format explicitly to remove the "
|
|
|
|
"restrictions.\n",
|
2015-06-16 15:19:22 +03:00
|
|
|
bs->file->bs->filename);
|
raw: Prohibit dangerous writes for probed images
If the user neglects to specify the image format, QEMU probes the
image to guess it automatically, for convenience.
Relying on format probing is insecure for raw images (CVE-2008-2004).
If the guest writes a suitable header to the device, the next probe
will recognize a format chosen by the guest. A malicious guest can
abuse this to gain access to host files, e.g. by crafting a QCOW2
header with backing file /etc/shadow.
Commit 1e72d3b (April 2008) provided -drive parameter format to let
users disable probing. Commit f965509 (March 2009) extended QCOW2 to
optionally store the backing file format, to let users disable backing
file probing. QED has had a flag to suppress probing since the
beginning (2010), set whenever a raw backing file is assigned.
All of these additions that allow to avoid format probing have to be
specified explicitly. The default still allows the attack.
In order to fix this, commit 79368c8 (July 2010) put probed raw images
in a restricted mode, in which they wouldn't be able to overwrite the
first few bytes of the image so that they would identify as a different
image. If a write to the first sector would write one of the signatures
of another driver, qemu would instead zero out the first four bytes.
This patch was later reverted in commit 8b33d9e (September 2010) because
it didn't get the handling of unaligned qiov members right.
Today's block layer that is based on coroutines and has qiov utility
functions makes it much easier to get this functionality right, so this
patch implements it.
The other differences of this patch to the old one are that it doesn't
silently write something different than the guest requested by zeroing
out some bytes (it fails the request instead) and that it doesn't
maintain a list of signatures in the raw driver (it calls the usual
probe function instead).
Note that this change doesn't introduce new breakage for false positive
cases where the guest legitimately writes data into the first sector
that matches the signatures of an image format (e.g. for nested virt):
These cases were broken before, only the failure mode changes from
corruption after the next restart (when the wrong format is probed) to
failing the problematic write request.
Also note that like in the original patch, the restrictions only apply
if the image format has been guessed by probing. Explicitly specifying a
format allows guests to write anything they like.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1416497234-29880-8-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-11-20 18:27:12 +03:00
|
|
|
}
|
|
|
|
|
2020-05-13 14:05:30 +03:00
|
|
|
ret = raw_apply_options(bs, s, offset, has_size, size, errp);
|
2016-10-31 13:27:40 +03:00
|
|
|
if (ret < 0) {
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (bs->sg && (s->offset || s->has_size)) {
|
|
|
|
error_setg(errp, "Cannot use offset/size with SCSI generic devices");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
2013-08-21 14:41:20 +04:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2013-08-21 14:41:23 +04:00
|
|
|
static int raw_probe(const uint8_t *buf, int buf_size, const char *filename)
|
2013-08-21 14:41:20 +04:00
|
|
|
{
|
|
|
|
/* smallest possible positive score so that raw is used if and only if no
|
|
|
|
* other block driver works
|
|
|
|
*/
|
|
|
|
return 1;
|
|
|
|
}
|
2013-08-21 14:41:22 +04:00
|
|
|
|
2015-02-16 14:47:56 +03:00
|
|
|
static int raw_probe_blocksizes(BlockDriverState *bs, BlockSizes *bsz)
|
|
|
|
{
|
2016-10-31 13:27:40 +03:00
|
|
|
BDRVRawState *s = bs->opaque;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
ret = bdrv_probe_blocksizes(bs->file->bs, bsz);
|
|
|
|
if (ret < 0) {
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!QEMU_IS_ALIGNED(s->offset, MAX(bsz->log, bsz->phys))) {
|
|
|
|
return -ENOTSUP;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
2015-02-16 14:47:56 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
static int raw_probe_geometry(BlockDriverState *bs, HDGeometry *geo)
|
|
|
|
{
|
2016-10-31 13:27:40 +03:00
|
|
|
BDRVRawState *s = bs->opaque;
|
|
|
|
if (s->offset || s->has_size) {
|
|
|
|
return -ENOTSUP;
|
|
|
|
}
|
2015-06-16 15:19:22 +03:00
|
|
|
return bdrv_probe_geometry(bs->file->bs, geo);
|
2015-02-16 14:47:56 +03:00
|
|
|
}
|
|
|
|
|
2018-06-01 12:26:41 +03:00
|
|
|
static int coroutine_fn raw_co_copy_range_from(BlockDriverState *bs,
|
2018-07-09 19:37:17 +03:00
|
|
|
BdrvChild *src,
|
|
|
|
uint64_t src_offset,
|
|
|
|
BdrvChild *dst,
|
|
|
|
uint64_t dst_offset,
|
|
|
|
uint64_t bytes,
|
|
|
|
BdrvRequestFlags read_flags,
|
|
|
|
BdrvRequestFlags write_flags)
|
2018-06-01 12:26:41 +03:00
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
ret = raw_adjust_offset(bs, &src_offset, bytes, false);
|
|
|
|
if (ret) {
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
return bdrv_co_copy_range_from(bs->file, src_offset, dst, dst_offset,
|
2018-07-09 19:37:17 +03:00
|
|
|
bytes, read_flags, write_flags);
|
2018-06-01 12:26:41 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
static int coroutine_fn raw_co_copy_range_to(BlockDriverState *bs,
|
2018-07-09 19:37:17 +03:00
|
|
|
BdrvChild *src,
|
|
|
|
uint64_t src_offset,
|
|
|
|
BdrvChild *dst,
|
|
|
|
uint64_t dst_offset,
|
|
|
|
uint64_t bytes,
|
|
|
|
BdrvRequestFlags read_flags,
|
|
|
|
BdrvRequestFlags write_flags)
|
2018-06-01 12:26:41 +03:00
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
ret = raw_adjust_offset(bs, &dst_offset, bytes, true);
|
|
|
|
if (ret) {
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
return bdrv_co_copy_range_to(src, src_offset, bs->file, dst_offset, bytes,
|
2018-07-09 19:37:17 +03:00
|
|
|
read_flags, write_flags);
|
2018-06-01 12:26:41 +03:00
|
|
|
}
|
|
|
|
|
2019-02-01 22:29:25 +03:00
|
|
|
static const char *const raw_strong_runtime_opts[] = {
|
|
|
|
"offset",
|
|
|
|
"size",
|
|
|
|
|
|
|
|
NULL
|
|
|
|
};
|
|
|
|
|
2021-02-05 19:37:13 +03:00
|
|
|
static void raw_cancel_in_flight(BlockDriverState *bs)
|
|
|
|
{
|
|
|
|
bdrv_cancel_in_flight(bs->file->bs);
|
|
|
|
}
|
|
|
|
|
2014-12-02 20:32:41 +03:00
|
|
|
BlockDriver bdrv_raw = {
|
2013-08-21 14:41:22 +04:00
|
|
|
.format_name = "raw",
|
2016-10-31 13:27:40 +03:00
|
|
|
.instance_size = sizeof(BDRVRawState),
|
2013-08-21 14:41:22 +04:00
|
|
|
.bdrv_probe = &raw_probe,
|
|
|
|
.bdrv_reopen_prepare = &raw_reopen_prepare,
|
2016-10-31 13:27:40 +03:00
|
|
|
.bdrv_reopen_commit = &raw_reopen_commit,
|
|
|
|
.bdrv_reopen_abort = &raw_reopen_abort,
|
2013-08-21 14:41:22 +04:00
|
|
|
.bdrv_open = &raw_open,
|
2020-05-13 14:05:39 +03:00
|
|
|
.bdrv_child_perm = bdrv_default_perms,
|
2018-01-18 15:43:45 +03:00
|
|
|
.bdrv_co_create_opts = &raw_co_create_opts,
|
2016-07-16 02:23:08 +03:00
|
|
|
.bdrv_co_preadv = &raw_co_preadv,
|
|
|
|
.bdrv_co_pwritev = &raw_co_pwritev,
|
2016-06-02 00:10:11 +03:00
|
|
|
.bdrv_co_pwrite_zeroes = &raw_co_pwrite_zeroes,
|
2016-07-16 02:23:04 +03:00
|
|
|
.bdrv_co_pdiscard = &raw_co_pdiscard,
|
2018-02-13 23:26:54 +03:00
|
|
|
.bdrv_co_block_status = &raw_co_block_status,
|
2018-06-01 12:26:41 +03:00
|
|
|
.bdrv_co_copy_range_from = &raw_co_copy_range_from,
|
|
|
|
.bdrv_co_copy_range_to = &raw_co_copy_range_to,
|
block: Convert .bdrv_truncate callback to coroutine_fn
bdrv_truncate() is an operation that can block (even for a quite long
time, depending on the PreallocMode) in I/O paths that shouldn't block.
Convert it to a coroutine_fn so that we have the infrastructure for
drivers to make their .bdrv_co_truncate implementation asynchronous.
This change could potentially introduce new race conditions because
bdrv_truncate() isn't necessarily executed atomically any more. Whether
this is a problem needs to be evaluated for each block driver that
supports truncate:
* file-posix/win32, gluster, iscsi, nfs, rbd, ssh, sheepdog: The
protocol drivers are trivially safe because they don't actually yield
yet, so there is no change in behaviour.
* copy-on-read, crypto, raw-format: Essentially just filter drivers that
pass the request to a child node, no problem.
* qcow2: The implementation modifies metadata, so it needs to hold
s->lock to be safe with concurrent I/O requests. In order to avoid
double locking, this requires pulling the locking out into
preallocate_co() and using qcow2_write_caches() instead of
bdrv_flush().
* qed: Does a single header update, this is fine without locking.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2018-06-21 18:54:35 +03:00
|
|
|
.bdrv_co_truncate = &raw_co_truncate,
|
2013-08-21 14:41:22 +04:00
|
|
|
.bdrv_getlength = &raw_getlength,
|
2020-05-13 14:05:12 +03:00
|
|
|
.is_format = true,
|
block: Avoid unecessary drv->bdrv_getlength() calls
The block layer generally keeps the size of an image cached in
bs->total_sectors so that it doesn't have to perform expensive
operations to get the size whenever it needs it.
This doesn't work however when using a backend that can change its size
without qemu being aware of it, i.e. passthrough of removable media like
CD-ROMs or floppy disks. For this reason, the caching is disabled when a
removable device is used.
It is obvious that checking whether the _guest_ device has removable
media isn't the right thing to do when we want to know whether the size
of the host backend can change. To make things worse, non-top-level
BlockDriverStates never have any device attached, which makes qemu
assume they are removable, so drv->bdrv_getlength() is always called on
the protocol layer. In the case of raw-posix, this causes unnecessary
lseek() system calls, which turned out to be rather expensive.
This patch completely changes the logic and disables bs->total_sectors
caching only for certain block driver types, for which a size change is
expected: host_cdrom and host_floppy on POSIX, host_device on win32; also
the raw format in case it sits on top of one of these protocols, but in
the common case the nested bdrv_getlength() call on the protocol driver
will use the cache again and avoid an expensive drv->bdrv_getlength()
call.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2013-10-29 15:18:58 +04:00
|
|
|
.has_variable_length = true,
|
2017-07-05 15:57:31 +03:00
|
|
|
.bdrv_measure = &raw_measure,
|
2013-08-21 14:41:22 +04:00
|
|
|
.bdrv_get_info = &raw_get_info,
|
2016-07-16 02:23:08 +03:00
|
|
|
.bdrv_refresh_limits = &raw_refresh_limits,
|
2015-02-16 14:47:56 +03:00
|
|
|
.bdrv_probe_blocksizes = &raw_probe_blocksizes,
|
|
|
|
.bdrv_probe_geometry = &raw_probe_geometry,
|
2013-08-21 14:41:22 +04:00
|
|
|
.bdrv_eject = &raw_eject,
|
|
|
|
.bdrv_lock_medium = &raw_lock_medium,
|
2016-10-20 16:09:36 +03:00
|
|
|
.bdrv_co_ioctl = &raw_co_ioctl,
|
2014-06-05 13:21:03 +04:00
|
|
|
.create_opts = &raw_create_opts,
|
2019-02-01 22:29:25 +03:00
|
|
|
.bdrv_has_zero_init = &raw_has_zero_init,
|
|
|
|
.strong_runtime_opts = raw_strong_runtime_opts,
|
2019-03-12 19:48:48 +03:00
|
|
|
.mutable_opts = mutable_opts,
|
2021-02-05 19:37:13 +03:00
|
|
|
.bdrv_cancel_in_flight = raw_cancel_in_flight,
|
2013-08-21 14:41:22 +04:00
|
|
|
};
|
|
|
|
|
|
|
|
static void bdrv_raw_init(void)
|
|
|
|
{
|
|
|
|
bdrv_register(&bdrv_raw);
|
|
|
|
}
|
|
|
|
|
|
|
|
block_init(bdrv_raw_init);
|