qemu/qapi/block.json

468 lines
13 KiB
JSON
Raw Normal View History

# -*- Mode: Python -*-
##
# = Block devices
##
{ 'include': 'block-core.json' }
##
# == Additional block stuff (VM related)
##
##
# @BiosAtaTranslation:
#
# Policy that BIOS should use to interpret cylinder/head/sector
# addresses. Note that Bochs BIOS and SeaBIOS will not actually
# translate logical CHS to physical; instead, they will use logical
# block addressing.
#
# @auto: If cylinder/heads/sizes are passed, choose between none and LBA
# depending on the size of the disk. If they are not passed,
# choose none if QEMU can guess that the disk had 16 or fewer
# heads, large if QEMU can guess that the disk had 131072 or
# fewer tracks across all heads (i.e. cylinders*heads<131072),
# otherwise LBA.
#
# @none: The physical disk geometry is equal to the logical geometry.
#
# @lba: Assume 63 sectors per track and one of 16, 32, 64, 128 or 255
# heads (if fewer than 255 are enough to cover the whole disk
# with 1024 cylinders/head). The number of cylinders/head is
# then computed based on the number of sectors and heads.
#
# @large: The number of cylinders per head is scaled down to 1024
# by correspondingly scaling up the number of heads.
#
# @rechs: Same as @large, but first convert a 16-head geometry to
# 15-head, by proportionally scaling up the number of
# cylinders/head.
#
# Since: 2.0
##
{ 'enum': 'BiosAtaTranslation',
'data': ['auto', 'none', 'lba', 'large', 'rechs']}
##
# @FloppyDriveType:
#
# Type of Floppy drive to be emulated by the Floppy Disk Controller.
#
# @144: 1.44MB 3.5" drive
# @288: 2.88MB 3.5" drive
# @120: 1.2MB 5.25" drive
# @none: No drive connected
# @auto: Automatically determined by inserted media at boot
#
# Since: 2.6
##
{ 'enum': 'FloppyDriveType',
'data': ['144', '288', '120', 'none', 'auto']}
##
# @BlockdevSnapshotInternal:
#
# @device: the device name or node-name of a root node to generate the snapshot
# from
#
# @name: the name of the internal snapshot to be created
#
# Notes: In transaction, if @name is empty, or any snapshot matching @name
# exists, the operation will fail. Only some image formats support it,
# for example, qcow2, rbd, and sheepdog.
#
# Since: 1.7
##
{ 'struct': 'BlockdevSnapshotInternal',
'data': { 'device': 'str', 'name': 'str' } }
##
# @PRManagerInfo:
#
# Information about a persistent reservation manager
#
# @id: the identifier of the persistent reservation manager
#
# @connected: true if the persistent reservation manager is connected to
# the underlying storage or helper
#
# Since: 3.0
##
{ 'struct': 'PRManagerInfo',
'data': {'id': 'str', 'connected': 'bool'} }
##
# @query-pr-managers:
#
# Returns a list of information about each persistent reservation manager.
#
# Returns: a list of @PRManagerInfo for each persistent reservation manager
#
# Since: 3.0
##
{ 'command': 'query-pr-managers', 'returns': ['PRManagerInfo'],
'allow-preconfig': true }
##
# @blockdev-snapshot-internal-sync:
#
# Synchronously take an internal snapshot of a block device, when the
# format of the image used supports it. If the name is an empty
# string, or a snapshot with name already exists, the operation will
# fail.
#
# For the arguments, see the documentation of BlockdevSnapshotInternal.
#
# Returns: nothing on success
#
# If @device is not a valid block device, GenericError
#
# If any snapshot matching @name exists, or @name is empty,
# GenericError
#
# If the format of the image used does not support it,
# BlockFormatFeatureNotSupported
#
# Since: 1.7
#
# Example:
#
# -> { "execute": "blockdev-snapshot-internal-sync",
# "arguments": { "device": "ide-hd0",
# "name": "snapshot0" }
# }
# <- { "return": {} }
#
##
{ 'command': 'blockdev-snapshot-internal-sync',
'data': 'BlockdevSnapshotInternal' }
##
# @blockdev-snapshot-delete-internal-sync:
#
# Synchronously delete an internal snapshot of a block device, when the format
# of the image used support it. The snapshot is identified by name or id or
# both. One of the name or id is required. Return SnapshotInfo for the
# successfully deleted snapshot.
#
# @device: the device name or node-name of a root node to delete the snapshot
# from
#
# @id: optional the snapshot's ID to be deleted
#
# @name: optional the snapshot's name to be deleted
#
# Returns: SnapshotInfo on success
# If @device is not a valid block device, GenericError
# If snapshot not found, GenericError
# If the format of the image used does not support it,
# BlockFormatFeatureNotSupported
# If @id and @name are both not specified, GenericError
#
# Since: 1.7
#
# Example:
#
# -> { "execute": "blockdev-snapshot-delete-internal-sync",
# "arguments": { "device": "ide-hd0",
# "name": "snapshot0" }
# }
# <- { "return": {
# "id": "1",
# "name": "snapshot0",
# "vm-state-size": 0,
# "date-sec": 1000012,
# "date-nsec": 10,
# "vm-clock-sec": 100,
# "vm-clock-nsec": 20
# }
# }
#
##
{ 'command': 'blockdev-snapshot-delete-internal-sync',
'data': { 'device': 'str', '*id': 'str', '*name': 'str'},
'returns': 'SnapshotInfo' }
##
# @eject:
#
# Ejects a device from a removable drive.
#
# @device: Block device name (deprecated, use @id instead)
#
# @id: The name or QOM path of the guest device (since: 2.8)
#
# @force: If true, eject regardless of whether the drive is locked.
# If not specified, the default value is false.
#
# Returns: Nothing on success
#
# If @device is not a valid block device, DeviceNotFound
#
# Notes: Ejecting a device with no media results in success
#
# Since: 0.14.0
#
# Example:
#
# -> { "execute": "eject", "arguments": { "id": "ide1-0-1" } }
# <- { "return": {} }
##
{ 'command': 'eject',
'data': { '*device': 'str',
'*id': 'str',
'*force': 'bool' } }
##
# @nbd-server-start:
#
# Start an NBD server listening on the given host and port. Block
# devices can then be exported using @nbd-server-add. The NBD
# server will present them as named exports; for example, another
# QEMU instance could refer to them as "nbd:HOST:PORT:exportname=NAME".
#
# @addr: Address on which to listen.
# @tls-creds: (optional) ID of the TLS credentials object. Since 2.6
#
# Returns: error if the server is already running.
#
# Since: 1.3.0
##
{ 'command': 'nbd-server-start',
'data': { 'addr': 'SocketAddressLegacy',
'*tls-creds': 'str'} }
##
# @nbd-server-add:
#
# Export a block node to QEMU's embedded NBD server.
#
# @device: The device name or node name of the node to be exported
#
# @name: Export name. If unspecified, the @device parameter is used as the
# export name. (Since 2.12)
#
# @writable: Whether clients should be able to write to the device via the
# NBD connection (default false).
#
# Returns: error if the server is not running, or export with the same name
# already exists.
#
# Since: 1.3.0
##
{ 'command': 'nbd-server-add',
'data': {'device': 'str', '*name': 'str', '*writable': 'bool'} }
##
# @NbdServerRemoveMode:
#
# Mode for removing an NBD export.
#
# @safe: Remove export if there are no existing connections, fail otherwise.
#
# @hard: Drop all connections immediately and remove export.
#
# Potential additional modes to be added in the future:
#
# hide: Just hide export from new clients, leave existing connections as is.
# Remove export after all clients are disconnected.
#
# soft: Hide export from new clients, answer with ESHUTDOWN for all further
# requests from existing clients.
#
# Since: 2.12
##
{'enum': 'NbdServerRemoveMode', 'data': ['safe', 'hard']}
##
# @nbd-server-remove:
#
# Remove NBD export by name.
#
# @name: Export name.
#
# @mode: Mode of command operation. See @NbdServerRemoveMode description.
# Default is 'safe'.
#
# Returns: error if
# - the server is not running
# - export is not found
# - mode is 'safe' and there are existing connections
#
# Since: 2.12
##
{ 'command': 'nbd-server-remove',
'data': {'name': 'str', '*mode': 'NbdServerRemoveMode'} }
##
# @x-nbd-server-add-bitmap:
#
# Expose a dirty bitmap associated with the selected export. The bitmap search
# starts at the device attached to the export, and includes all backing files.
# The exported bitmap is then locked until the NBD export is removed.
#
# @name: Export name.
#
# @bitmap: Bitmap name to search for.
#
# @bitmap-export-name: How the bitmap will be seen by nbd clients
# (default @bitmap)
#
# Note: the client must use NBD_OPT_SET_META_CONTEXT with a query of
# "qemu:dirty-bitmap:NAME" (where NAME matches @bitmap-export-name) to access
# the exposed bitmap.
#
# Since: 3.0
##
{ 'command': 'x-nbd-server-add-bitmap',
'data': {'name': 'str', 'bitmap': 'str', '*bitmap-export-name': 'str'} }
##
# @nbd-server-stop:
#
# Stop QEMU's embedded NBD server, and unregister all devices previously
# added via @nbd-server-add.
#
# Since: 1.3.0
##
{ 'command': 'nbd-server-stop' }
##
# @DEVICE_TRAY_MOVED:
#
# Emitted whenever the tray of a removable device is moved by the guest or by
# HMP/QMP commands
#
# @device: Block device name. This is always present for compatibility
# reasons, but it can be empty ("") if the image does not
# have a device name associated.
#
# @id: The name or QOM path of the guest device (since 2.8)
#
# @tray-open: true if the tray has been opened or false if it has been closed
#
# Since: 1.1
#
# Example:
#
# <- { "event": "DEVICE_TRAY_MOVED",
# "data": { "device": "ide1-cd0",
# "id": "/machine/unattached/device[22]",
# "tray-open": true
# },
# "timestamp": { "seconds": 1265044230, "microseconds": 450486 } }
#
##
{ 'event': 'DEVICE_TRAY_MOVED',
'data': { 'device': 'str', 'id': 'str', 'tray-open': 'bool' } }
##
# @PR_MANAGER_STATUS_CHANGED:
#
# Emitted whenever the connected status of a persistent reservation
# manager changes.
#
# @id: The id of the PR manager object
#
# @connected: true if the PR manager is connected to a backend
#
# Since: 3.0
#
# Example:
#
# <- { "event": "PR_MANAGER_STATUS_CHANGED",
# "data": { "id": "pr-helper0",
# "connected": true
# },
# "timestamp": { "seconds": 1519840375, "microseconds": 450486 } }
#
##
{ 'event': 'PR_MANAGER_STATUS_CHANGED',
'data': { 'id': 'str', 'connected': 'bool' } }
##
# @QuorumOpType:
#
# An enumeration of the quorum operation types
#
# @read: read operation
#
# @write: write operation
#
# @flush: flush operation
#
# Since: 2.6
##
{ 'enum': 'QuorumOpType',
'data': [ 'read', 'write', 'flush' ] }
##
# @QUORUM_FAILURE:
#
# Emitted by the Quorum block driver if it fails to establish a quorum
#
# @reference: device name if defined else node name
#
# @sector-num: number of the first sector of the failed read operation
#
# @sectors-count: failed read operation sector count
#
# Note: This event is rate-limited.
#
# Since: 2.0
#
# Example:
#
# <- { "event": "QUORUM_FAILURE",
# "data": { "reference": "usr1", "sector-num": 345435, "sectors-count": 5 },
# "timestamp": { "seconds": 1344522075, "microseconds": 745528 } }
#
##
{ 'event': 'QUORUM_FAILURE',
'data': { 'reference': 'str', 'sector-num': 'int', 'sectors-count': 'int' } }
##
# @QUORUM_REPORT_BAD:
#
# Emitted to report a corruption of a Quorum file
#
# @type: quorum operation type (Since 2.6)
#
# @error: error message. Only present on failure. This field
# contains a human-readable error message. There are no semantics other
# than that the block layer reported an error and clients should not
# try to interpret the error string.
#
# @node-name: the graph node name of the block driver state
#
# @sector-num: number of the first sector of the failed read operation
#
# @sectors-count: failed read operation sector count
#
# Note: This event is rate-limited.
#
# Since: 2.0
#
# Example:
#
# 1. Read operation
#
# { "event": "QUORUM_REPORT_BAD",
# "data": { "node-name": "node0", "sector-num": 345435, "sectors-count": 5,
# "type": "read" },
# "timestamp": { "seconds": 1344522075, "microseconds": 745528 } }
#
# 2. Flush operation
#
# { "event": "QUORUM_REPORT_BAD",
# "data": { "node-name": "node0", "sector-num": 0, "sectors-count": 2097120,
# "type": "flush", "error": "Broken pipe" },
# "timestamp": { "seconds": 1456406829, "microseconds": 291763 } }
#
##
{ 'event': 'QUORUM_REPORT_BAD',
'data': { 'type': 'QuorumOpType', '*error': 'str', 'node-name': 'str',
'sector-num': 'int', 'sectors-count': 'int' } }