qemu/target/ppc/mmu-radix64.c

600 lines
20 KiB
C
Raw Normal View History

target/ppc: Implement ISA V3.00 radix page fault handler ISA V3.00 introduced a new radix mmu model. Implement the page fault handler for this so we can run a tcg guest in radix mode and perform address translation correctly. In real mode (mmu turned off) addresses are masked to remove the top 4 bits and then are subject to partition scoped translation, since we only support pseries at this stage it is only necessary to perform the masking and then we're done. In virtual mode (mmu turned on) address translation if performed as follows: 1. Use the quadrant to determine the fully qualified address. The fully qualified address is defined as the combination of the effective address, the effective logical partition id (LPID) and the effective process id (PID). Based on the quadrant (EA63:62) we set the pid and lpid like so: quadrant 0: lpid = LPIDR, pid = PIDR quadrant 1: HV only (not allowed in pseries) quadrant 2: HV only (not allowed in pseries) quadrant 3: lpid = LPIDR, pid = 0 If we can't get the fully qualified address we raise a segment interrupt. 2. Find the guest radix tree We ask the virtual hypervisor for the partition table which was registered with H_REGISTER_PROC_TBL which points us to the process table in guest memory. We then index this table by pid to get the process table entry which points us to the appropriate radix tree to translate the address. If the process table isn't big enough to contain an entry for the current pid then we raise a storage interrupt. 3. Walk the radix tree Next we walk the radix tree where each level is a table of page directory entries indexed by some number of bits from the effective address, where the number of bits is determined by the table size. We continue to walk the tree (while entries are valid and the table is of minimum size) until we reach a table of page table entries, indicated by having the leaf bit set. The appropriate pte is then checked for sufficient access permissions, the reference and change bits are updated and the real address is calculated from the real page number bits of the pte and the low bits of the effective address. If we can't find an entry or can't access the entry bacause of permissions then we raise a storage interrupt. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> [dwg: Add missing parentheses to macro] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-05-02 09:37:17 +03:00
/*
* PowerPC Radix MMU mulation helpers for QEMU.
*
* Copyright (c) 2016 Suraj Jitindar Singh, IBM Corporation
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
target/ppc: Implement ISA V3.00 radix page fault handler ISA V3.00 introduced a new radix mmu model. Implement the page fault handler for this so we can run a tcg guest in radix mode and perform address translation correctly. In real mode (mmu turned off) addresses are masked to remove the top 4 bits and then are subject to partition scoped translation, since we only support pseries at this stage it is only necessary to perform the masking and then we're done. In virtual mode (mmu turned on) address translation if performed as follows: 1. Use the quadrant to determine the fully qualified address. The fully qualified address is defined as the combination of the effective address, the effective logical partition id (LPID) and the effective process id (PID). Based on the quadrant (EA63:62) we set the pid and lpid like so: quadrant 0: lpid = LPIDR, pid = PIDR quadrant 1: HV only (not allowed in pseries) quadrant 2: HV only (not allowed in pseries) quadrant 3: lpid = LPIDR, pid = 0 If we can't get the fully qualified address we raise a segment interrupt. 2. Find the guest radix tree We ask the virtual hypervisor for the partition table which was registered with H_REGISTER_PROC_TBL which points us to the process table in guest memory. We then index this table by pid to get the process table entry which points us to the appropriate radix tree to translate the address. If the process table isn't big enough to contain an entry for the current pid then we raise a storage interrupt. 3. Walk the radix tree Next we walk the radix tree where each level is a table of page directory entries indexed by some number of bits from the effective address, where the number of bits is determined by the table size. We continue to walk the tree (while entries are valid and the table is of minimum size) until we reach a table of page table entries, indicated by having the leaf bit set. The appropriate pte is then checked for sufficient access permissions, the reference and change bits are updated and the real address is calculated from the real page number bits of the pte and the low bits of the effective address. If we can't find an entry or can't access the entry bacause of permissions then we raise a storage interrupt. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> [dwg: Add missing parentheses to macro] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-05-02 09:37:17 +03:00
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*/
#include "qemu/osdep.h"
#include "cpu.h"
#include "exec/exec-all.h"
#include "exec/helper-proto.h"
#include "qemu/error-report.h"
#include "sysemu/kvm.h"
#include "kvm_ppc.h"
#include "exec/log.h"
#include "mmu-radix64.h"
#include "mmu-book3s-v3.h"
static bool ppc_radix64_get_fully_qualified_addr(const CPUPPCState *env,
vaddr eaddr,
target/ppc: Implement ISA V3.00 radix page fault handler ISA V3.00 introduced a new radix mmu model. Implement the page fault handler for this so we can run a tcg guest in radix mode and perform address translation correctly. In real mode (mmu turned off) addresses are masked to remove the top 4 bits and then are subject to partition scoped translation, since we only support pseries at this stage it is only necessary to perform the masking and then we're done. In virtual mode (mmu turned on) address translation if performed as follows: 1. Use the quadrant to determine the fully qualified address. The fully qualified address is defined as the combination of the effective address, the effective logical partition id (LPID) and the effective process id (PID). Based on the quadrant (EA63:62) we set the pid and lpid like so: quadrant 0: lpid = LPIDR, pid = PIDR quadrant 1: HV only (not allowed in pseries) quadrant 2: HV only (not allowed in pseries) quadrant 3: lpid = LPIDR, pid = 0 If we can't get the fully qualified address we raise a segment interrupt. 2. Find the guest radix tree We ask the virtual hypervisor for the partition table which was registered with H_REGISTER_PROC_TBL which points us to the process table in guest memory. We then index this table by pid to get the process table entry which points us to the appropriate radix tree to translate the address. If the process table isn't big enough to contain an entry for the current pid then we raise a storage interrupt. 3. Walk the radix tree Next we walk the radix tree where each level is a table of page directory entries indexed by some number of bits from the effective address, where the number of bits is determined by the table size. We continue to walk the tree (while entries are valid and the table is of minimum size) until we reach a table of page table entries, indicated by having the leaf bit set. The appropriate pte is then checked for sufficient access permissions, the reference and change bits are updated and the real address is calculated from the real page number bits of the pte and the low bits of the effective address. If we can't find an entry or can't access the entry bacause of permissions then we raise a storage interrupt. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> [dwg: Add missing parentheses to macro] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-05-02 09:37:17 +03:00
uint64_t *lpid, uint64_t *pid)
{
if (msr_hv) { /* MSR[HV] -> Hypervisor/bare metal */
switch (eaddr & R_EADDR_QUADRANT) {
case R_EADDR_QUADRANT0:
*lpid = 0;
*pid = env->spr[SPR_BOOKS_PID];
break;
case R_EADDR_QUADRANT1:
*lpid = env->spr[SPR_LPIDR];
*pid = env->spr[SPR_BOOKS_PID];
break;
case R_EADDR_QUADRANT2:
*lpid = env->spr[SPR_LPIDR];
*pid = 0;
break;
case R_EADDR_QUADRANT3:
*lpid = 0;
*pid = 0;
break;
default:
g_assert_not_reached();
}
} else { /* !MSR[HV] -> Guest */
target/ppc: Implement ISA V3.00 radix page fault handler ISA V3.00 introduced a new radix mmu model. Implement the page fault handler for this so we can run a tcg guest in radix mode and perform address translation correctly. In real mode (mmu turned off) addresses are masked to remove the top 4 bits and then are subject to partition scoped translation, since we only support pseries at this stage it is only necessary to perform the masking and then we're done. In virtual mode (mmu turned on) address translation if performed as follows: 1. Use the quadrant to determine the fully qualified address. The fully qualified address is defined as the combination of the effective address, the effective logical partition id (LPID) and the effective process id (PID). Based on the quadrant (EA63:62) we set the pid and lpid like so: quadrant 0: lpid = LPIDR, pid = PIDR quadrant 1: HV only (not allowed in pseries) quadrant 2: HV only (not allowed in pseries) quadrant 3: lpid = LPIDR, pid = 0 If we can't get the fully qualified address we raise a segment interrupt. 2. Find the guest radix tree We ask the virtual hypervisor for the partition table which was registered with H_REGISTER_PROC_TBL which points us to the process table in guest memory. We then index this table by pid to get the process table entry which points us to the appropriate radix tree to translate the address. If the process table isn't big enough to contain an entry for the current pid then we raise a storage interrupt. 3. Walk the radix tree Next we walk the radix tree where each level is a table of page directory entries indexed by some number of bits from the effective address, where the number of bits is determined by the table size. We continue to walk the tree (while entries are valid and the table is of minimum size) until we reach a table of page table entries, indicated by having the leaf bit set. The appropriate pte is then checked for sufficient access permissions, the reference and change bits are updated and the real address is calculated from the real page number bits of the pte and the low bits of the effective address. If we can't find an entry or can't access the entry bacause of permissions then we raise a storage interrupt. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> [dwg: Add missing parentheses to macro] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-05-02 09:37:17 +03:00
switch (eaddr & R_EADDR_QUADRANT) {
case R_EADDR_QUADRANT0: /* Guest application */
*lpid = env->spr[SPR_LPIDR];
*pid = env->spr[SPR_BOOKS_PID];
break;
case R_EADDR_QUADRANT1: /* Illegal */
case R_EADDR_QUADRANT2:
return false;
case R_EADDR_QUADRANT3: /* Guest OS */
*lpid = env->spr[SPR_LPIDR];
*pid = 0; /* pid set to 0 -> addresses guest operating system */
break;
default:
g_assert_not_reached();
target/ppc: Implement ISA V3.00 radix page fault handler ISA V3.00 introduced a new radix mmu model. Implement the page fault handler for this so we can run a tcg guest in radix mode and perform address translation correctly. In real mode (mmu turned off) addresses are masked to remove the top 4 bits and then are subject to partition scoped translation, since we only support pseries at this stage it is only necessary to perform the masking and then we're done. In virtual mode (mmu turned on) address translation if performed as follows: 1. Use the quadrant to determine the fully qualified address. The fully qualified address is defined as the combination of the effective address, the effective logical partition id (LPID) and the effective process id (PID). Based on the quadrant (EA63:62) we set the pid and lpid like so: quadrant 0: lpid = LPIDR, pid = PIDR quadrant 1: HV only (not allowed in pseries) quadrant 2: HV only (not allowed in pseries) quadrant 3: lpid = LPIDR, pid = 0 If we can't get the fully qualified address we raise a segment interrupt. 2. Find the guest radix tree We ask the virtual hypervisor for the partition table which was registered with H_REGISTER_PROC_TBL which points us to the process table in guest memory. We then index this table by pid to get the process table entry which points us to the appropriate radix tree to translate the address. If the process table isn't big enough to contain an entry for the current pid then we raise a storage interrupt. 3. Walk the radix tree Next we walk the radix tree where each level is a table of page directory entries indexed by some number of bits from the effective address, where the number of bits is determined by the table size. We continue to walk the tree (while entries are valid and the table is of minimum size) until we reach a table of page table entries, indicated by having the leaf bit set. The appropriate pte is then checked for sufficient access permissions, the reference and change bits are updated and the real address is calculated from the real page number bits of the pte and the low bits of the effective address. If we can't find an entry or can't access the entry bacause of permissions then we raise a storage interrupt. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> [dwg: Add missing parentheses to macro] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-05-02 09:37:17 +03:00
}
}
return true;
}
static void ppc_radix64_raise_segi(PowerPCCPU *cpu, int rwx, vaddr eaddr)
{
CPUState *cs = CPU(cpu);
CPUPPCState *env = &cpu->env;
if (rwx == 2) { /* Instruction Segment Interrupt */
cs->exception_index = POWERPC_EXCP_ISEG;
} else { /* Data Segment Interrupt */
cs->exception_index = POWERPC_EXCP_DSEG;
env->spr[SPR_DAR] = eaddr;
}
env->error_code = 0;
}
static void ppc_radix64_raise_si(PowerPCCPU *cpu, int rwx, vaddr eaddr,
uint32_t cause)
{
CPUState *cs = CPU(cpu);
CPUPPCState *env = &cpu->env;
if (rwx == 2) { /* Instruction Storage Interrupt */
cs->exception_index = POWERPC_EXCP_ISI;
env->error_code = cause;
} else { /* Data Storage Interrupt */
cs->exception_index = POWERPC_EXCP_DSI;
if (rwx == 1) { /* Write -> Store */
cause |= DSISR_ISSTORE;
}
env->spr[SPR_DSISR] = cause;
env->spr[SPR_DAR] = eaddr;
env->error_code = 0;
}
}
target/ppc: Add support for Radix partition-scoped translation The Radix tree translation model currently supports process-scoped translation for the PowerNV machine (Hypervisor mode) and for the pSeries machine (Guest mode). Guests running under an emulated Hypervisor (PowerNV machine) require a new type of Radix translation, called partition-scoped, which is missing today. The Radix tree translation is a 2 steps process. The first step, process-scoped translation, converts an effective Address to a guest real address, and the second step, partition-scoped translation, converts a guest real address to a host real address. There are difference cases to covers : * Hypervisor real mode access: no Radix translation. * Hypervisor or host application access (quadrant 0 and 3) with relocation on: process-scoped translation. * Guest OS real mode access: only partition-scoped translation. * Guest OS real or guest application access (quadrant 0 and 3) with relocation on: both process-scoped translation and partition-scoped translations. * Hypervisor access in quadrant 1 and 2 with relocation on: both process-scoped translation and partition-scoped translations. The radix tree partition-scoped translation is performed using tables pointed to by the first double-word of the Partition Table Entries and process-scoped translation uses tables pointed to by the Process Table Entries (second double-word of the Partition Table Entries). Both partition-scoped and process-scoped translations process are identical and thus the radix tree traversing code is largely reused. However, errors in partition-scoped translations generate hypervisor exceptions. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Signed-off-by: Greg Kurz <groug@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200403140056.59465-5-clg@kaod.org> [dwg: Fixup from Greg Kurz folded in] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-04-03 17:00:56 +03:00
static void ppc_radix64_raise_hsi(PowerPCCPU *cpu, int rwx, vaddr eaddr,
hwaddr g_raddr, uint32_t cause)
{
CPUState *cs = CPU(cpu);
CPUPPCState *env = &cpu->env;
if (rwx == 2) { /* H Instruction Storage Interrupt */
cs->exception_index = POWERPC_EXCP_HISI;
env->spr[SPR_ASDR] = g_raddr;
env->error_code = cause;
} else { /* H Data Storage Interrupt */
cs->exception_index = POWERPC_EXCP_HDSI;
if (rwx == 1) { /* Write -> Store */
cause |= DSISR_ISSTORE;
}
env->spr[SPR_HDSISR] = cause;
env->spr[SPR_HDAR] = eaddr;
env->spr[SPR_ASDR] = g_raddr;
env->error_code = 0;
}
}
target/ppc: Implement ISA V3.00 radix page fault handler ISA V3.00 introduced a new radix mmu model. Implement the page fault handler for this so we can run a tcg guest in radix mode and perform address translation correctly. In real mode (mmu turned off) addresses are masked to remove the top 4 bits and then are subject to partition scoped translation, since we only support pseries at this stage it is only necessary to perform the masking and then we're done. In virtual mode (mmu turned on) address translation if performed as follows: 1. Use the quadrant to determine the fully qualified address. The fully qualified address is defined as the combination of the effective address, the effective logical partition id (LPID) and the effective process id (PID). Based on the quadrant (EA63:62) we set the pid and lpid like so: quadrant 0: lpid = LPIDR, pid = PIDR quadrant 1: HV only (not allowed in pseries) quadrant 2: HV only (not allowed in pseries) quadrant 3: lpid = LPIDR, pid = 0 If we can't get the fully qualified address we raise a segment interrupt. 2. Find the guest radix tree We ask the virtual hypervisor for the partition table which was registered with H_REGISTER_PROC_TBL which points us to the process table in guest memory. We then index this table by pid to get the process table entry which points us to the appropriate radix tree to translate the address. If the process table isn't big enough to contain an entry for the current pid then we raise a storage interrupt. 3. Walk the radix tree Next we walk the radix tree where each level is a table of page directory entries indexed by some number of bits from the effective address, where the number of bits is determined by the table size. We continue to walk the tree (while entries are valid and the table is of minimum size) until we reach a table of page table entries, indicated by having the leaf bit set. The appropriate pte is then checked for sufficient access permissions, the reference and change bits are updated and the real address is calculated from the real page number bits of the pte and the low bits of the effective address. If we can't find an entry or can't access the entry bacause of permissions then we raise a storage interrupt. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> [dwg: Add missing parentheses to macro] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-05-02 09:37:17 +03:00
static bool ppc_radix64_check_prot(PowerPCCPU *cpu, int rwx, uint64_t pte,
int *fault_cause, int *prot,
bool partition_scoped)
target/ppc: Implement ISA V3.00 radix page fault handler ISA V3.00 introduced a new radix mmu model. Implement the page fault handler for this so we can run a tcg guest in radix mode and perform address translation correctly. In real mode (mmu turned off) addresses are masked to remove the top 4 bits and then are subject to partition scoped translation, since we only support pseries at this stage it is only necessary to perform the masking and then we're done. In virtual mode (mmu turned on) address translation if performed as follows: 1. Use the quadrant to determine the fully qualified address. The fully qualified address is defined as the combination of the effective address, the effective logical partition id (LPID) and the effective process id (PID). Based on the quadrant (EA63:62) we set the pid and lpid like so: quadrant 0: lpid = LPIDR, pid = PIDR quadrant 1: HV only (not allowed in pseries) quadrant 2: HV only (not allowed in pseries) quadrant 3: lpid = LPIDR, pid = 0 If we can't get the fully qualified address we raise a segment interrupt. 2. Find the guest radix tree We ask the virtual hypervisor for the partition table which was registered with H_REGISTER_PROC_TBL which points us to the process table in guest memory. We then index this table by pid to get the process table entry which points us to the appropriate radix tree to translate the address. If the process table isn't big enough to contain an entry for the current pid then we raise a storage interrupt. 3. Walk the radix tree Next we walk the radix tree where each level is a table of page directory entries indexed by some number of bits from the effective address, where the number of bits is determined by the table size. We continue to walk the tree (while entries are valid and the table is of minimum size) until we reach a table of page table entries, indicated by having the leaf bit set. The appropriate pte is then checked for sufficient access permissions, the reference and change bits are updated and the real address is calculated from the real page number bits of the pte and the low bits of the effective address. If we can't find an entry or can't access the entry bacause of permissions then we raise a storage interrupt. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> [dwg: Add missing parentheses to macro] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-05-02 09:37:17 +03:00
{
CPUPPCState *env = &cpu->env;
const int need_prot[] = { PAGE_READ, PAGE_WRITE, PAGE_EXEC };
/* Check Page Attributes (pte58:59) */
if (((pte & R_PTE_ATT) == R_PTE_ATT_NI_IO) && (rwx == 2)) {
/*
* Radix PTE entries with the non-idempotent I/O attribute are treated
* as guarded storage
*/
*fault_cause |= SRR1_NOEXEC_GUARD;
return true;
}
/* Determine permissions allowed by Encoded Access Authority */
if (!partition_scoped && (pte & R_PTE_EAA_PRIV) && msr_pr) {
target/ppc: Implement ISA V3.00 radix page fault handler ISA V3.00 introduced a new radix mmu model. Implement the page fault handler for this so we can run a tcg guest in radix mode and perform address translation correctly. In real mode (mmu turned off) addresses are masked to remove the top 4 bits and then are subject to partition scoped translation, since we only support pseries at this stage it is only necessary to perform the masking and then we're done. In virtual mode (mmu turned on) address translation if performed as follows: 1. Use the quadrant to determine the fully qualified address. The fully qualified address is defined as the combination of the effective address, the effective logical partition id (LPID) and the effective process id (PID). Based on the quadrant (EA63:62) we set the pid and lpid like so: quadrant 0: lpid = LPIDR, pid = PIDR quadrant 1: HV only (not allowed in pseries) quadrant 2: HV only (not allowed in pseries) quadrant 3: lpid = LPIDR, pid = 0 If we can't get the fully qualified address we raise a segment interrupt. 2. Find the guest radix tree We ask the virtual hypervisor for the partition table which was registered with H_REGISTER_PROC_TBL which points us to the process table in guest memory. We then index this table by pid to get the process table entry which points us to the appropriate radix tree to translate the address. If the process table isn't big enough to contain an entry for the current pid then we raise a storage interrupt. 3. Walk the radix tree Next we walk the radix tree where each level is a table of page directory entries indexed by some number of bits from the effective address, where the number of bits is determined by the table size. We continue to walk the tree (while entries are valid and the table is of minimum size) until we reach a table of page table entries, indicated by having the leaf bit set. The appropriate pte is then checked for sufficient access permissions, the reference and change bits are updated and the real address is calculated from the real page number bits of the pte and the low bits of the effective address. If we can't find an entry or can't access the entry bacause of permissions then we raise a storage interrupt. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> [dwg: Add missing parentheses to macro] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-05-02 09:37:17 +03:00
*prot = 0;
} else if (msr_pr || (pte & R_PTE_EAA_PRIV) || partition_scoped) {
target/ppc: Implement ISA V3.00 radix page fault handler ISA V3.00 introduced a new radix mmu model. Implement the page fault handler for this so we can run a tcg guest in radix mode and perform address translation correctly. In real mode (mmu turned off) addresses are masked to remove the top 4 bits and then are subject to partition scoped translation, since we only support pseries at this stage it is only necessary to perform the masking and then we're done. In virtual mode (mmu turned on) address translation if performed as follows: 1. Use the quadrant to determine the fully qualified address. The fully qualified address is defined as the combination of the effective address, the effective logical partition id (LPID) and the effective process id (PID). Based on the quadrant (EA63:62) we set the pid and lpid like so: quadrant 0: lpid = LPIDR, pid = PIDR quadrant 1: HV only (not allowed in pseries) quadrant 2: HV only (not allowed in pseries) quadrant 3: lpid = LPIDR, pid = 0 If we can't get the fully qualified address we raise a segment interrupt. 2. Find the guest radix tree We ask the virtual hypervisor for the partition table which was registered with H_REGISTER_PROC_TBL which points us to the process table in guest memory. We then index this table by pid to get the process table entry which points us to the appropriate radix tree to translate the address. If the process table isn't big enough to contain an entry for the current pid then we raise a storage interrupt. 3. Walk the radix tree Next we walk the radix tree where each level is a table of page directory entries indexed by some number of bits from the effective address, where the number of bits is determined by the table size. We continue to walk the tree (while entries are valid and the table is of minimum size) until we reach a table of page table entries, indicated by having the leaf bit set. The appropriate pte is then checked for sufficient access permissions, the reference and change bits are updated and the real address is calculated from the real page number bits of the pte and the low bits of the effective address. If we can't find an entry or can't access the entry bacause of permissions then we raise a storage interrupt. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> [dwg: Add missing parentheses to macro] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-05-02 09:37:17 +03:00
*prot = ppc_radix64_get_prot_eaa(pte);
} else { /* !msr_pr && !(pte & R_PTE_EAA_PRIV) && !partition_scoped */
target/ppc: Implement ISA V3.00 radix page fault handler ISA V3.00 introduced a new radix mmu model. Implement the page fault handler for this so we can run a tcg guest in radix mode and perform address translation correctly. In real mode (mmu turned off) addresses are masked to remove the top 4 bits and then are subject to partition scoped translation, since we only support pseries at this stage it is only necessary to perform the masking and then we're done. In virtual mode (mmu turned on) address translation if performed as follows: 1. Use the quadrant to determine the fully qualified address. The fully qualified address is defined as the combination of the effective address, the effective logical partition id (LPID) and the effective process id (PID). Based on the quadrant (EA63:62) we set the pid and lpid like so: quadrant 0: lpid = LPIDR, pid = PIDR quadrant 1: HV only (not allowed in pseries) quadrant 2: HV only (not allowed in pseries) quadrant 3: lpid = LPIDR, pid = 0 If we can't get the fully qualified address we raise a segment interrupt. 2. Find the guest radix tree We ask the virtual hypervisor for the partition table which was registered with H_REGISTER_PROC_TBL which points us to the process table in guest memory. We then index this table by pid to get the process table entry which points us to the appropriate radix tree to translate the address. If the process table isn't big enough to contain an entry for the current pid then we raise a storage interrupt. 3. Walk the radix tree Next we walk the radix tree where each level is a table of page directory entries indexed by some number of bits from the effective address, where the number of bits is determined by the table size. We continue to walk the tree (while entries are valid and the table is of minimum size) until we reach a table of page table entries, indicated by having the leaf bit set. The appropriate pte is then checked for sufficient access permissions, the reference and change bits are updated and the real address is calculated from the real page number bits of the pte and the low bits of the effective address. If we can't find an entry or can't access the entry bacause of permissions then we raise a storage interrupt. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> [dwg: Add missing parentheses to macro] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-05-02 09:37:17 +03:00
*prot = ppc_radix64_get_prot_eaa(pte);
*prot &= ppc_radix64_get_prot_amr(cpu); /* Least combined permissions */
}
/* Check if requested access type is allowed */
if (need_prot[rwx] & ~(*prot)) { /* Page Protected for that Access */
*fault_cause |= DSISR_PROTFAULT;
return true;
}
return false;
}
static void ppc_radix64_set_rc(PowerPCCPU *cpu, int rwx, uint64_t pte,
hwaddr pte_addr, int *prot)
{
CPUState *cs = CPU(cpu);
uint64_t npte;
npte = pte | R_PTE_R; /* Always set reference bit */
if (rwx == 1) { /* Store/Write */
npte |= R_PTE_C; /* Set change bit */
} else {
/*
* Treat the page as read-only for now, so that a later write
* will pass through this function again to set the C bit.
*/
*prot &= ~PAGE_WRITE;
}
if (pte ^ npte) { /* If pte has changed then write it back */
stq_phys(cs->as, pte_addr, npte);
}
}
static int ppc_radix64_next_level(AddressSpace *as, vaddr eaddr,
uint64_t *pte_addr, uint64_t *nls,
int *psize, uint64_t *pte, int *fault_cause)
target/ppc: Implement ISA V3.00 radix page fault handler ISA V3.00 introduced a new radix mmu model. Implement the page fault handler for this so we can run a tcg guest in radix mode and perform address translation correctly. In real mode (mmu turned off) addresses are masked to remove the top 4 bits and then are subject to partition scoped translation, since we only support pseries at this stage it is only necessary to perform the masking and then we're done. In virtual mode (mmu turned on) address translation if performed as follows: 1. Use the quadrant to determine the fully qualified address. The fully qualified address is defined as the combination of the effective address, the effective logical partition id (LPID) and the effective process id (PID). Based on the quadrant (EA63:62) we set the pid and lpid like so: quadrant 0: lpid = LPIDR, pid = PIDR quadrant 1: HV only (not allowed in pseries) quadrant 2: HV only (not allowed in pseries) quadrant 3: lpid = LPIDR, pid = 0 If we can't get the fully qualified address we raise a segment interrupt. 2. Find the guest radix tree We ask the virtual hypervisor for the partition table which was registered with H_REGISTER_PROC_TBL which points us to the process table in guest memory. We then index this table by pid to get the process table entry which points us to the appropriate radix tree to translate the address. If the process table isn't big enough to contain an entry for the current pid then we raise a storage interrupt. 3. Walk the radix tree Next we walk the radix tree where each level is a table of page directory entries indexed by some number of bits from the effective address, where the number of bits is determined by the table size. We continue to walk the tree (while entries are valid and the table is of minimum size) until we reach a table of page table entries, indicated by having the leaf bit set. The appropriate pte is then checked for sufficient access permissions, the reference and change bits are updated and the real address is calculated from the real page number bits of the pte and the low bits of the effective address. If we can't find an entry or can't access the entry bacause of permissions then we raise a storage interrupt. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> [dwg: Add missing parentheses to macro] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-05-02 09:37:17 +03:00
{
uint64_t index, pde;
if (*nls < 5) { /* Directory maps less than 2**5 entries */
target/ppc: Implement ISA V3.00 radix page fault handler ISA V3.00 introduced a new radix mmu model. Implement the page fault handler for this so we can run a tcg guest in radix mode and perform address translation correctly. In real mode (mmu turned off) addresses are masked to remove the top 4 bits and then are subject to partition scoped translation, since we only support pseries at this stage it is only necessary to perform the masking and then we're done. In virtual mode (mmu turned on) address translation if performed as follows: 1. Use the quadrant to determine the fully qualified address. The fully qualified address is defined as the combination of the effective address, the effective logical partition id (LPID) and the effective process id (PID). Based on the quadrant (EA63:62) we set the pid and lpid like so: quadrant 0: lpid = LPIDR, pid = PIDR quadrant 1: HV only (not allowed in pseries) quadrant 2: HV only (not allowed in pseries) quadrant 3: lpid = LPIDR, pid = 0 If we can't get the fully qualified address we raise a segment interrupt. 2. Find the guest radix tree We ask the virtual hypervisor for the partition table which was registered with H_REGISTER_PROC_TBL which points us to the process table in guest memory. We then index this table by pid to get the process table entry which points us to the appropriate radix tree to translate the address. If the process table isn't big enough to contain an entry for the current pid then we raise a storage interrupt. 3. Walk the radix tree Next we walk the radix tree where each level is a table of page directory entries indexed by some number of bits from the effective address, where the number of bits is determined by the table size. We continue to walk the tree (while entries are valid and the table is of minimum size) until we reach a table of page table entries, indicated by having the leaf bit set. The appropriate pte is then checked for sufficient access permissions, the reference and change bits are updated and the real address is calculated from the real page number bits of the pte and the low bits of the effective address. If we can't find an entry or can't access the entry bacause of permissions then we raise a storage interrupt. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> [dwg: Add missing parentheses to macro] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-05-02 09:37:17 +03:00
*fault_cause |= DSISR_R_BADCONFIG;
return 1;
target/ppc: Implement ISA V3.00 radix page fault handler ISA V3.00 introduced a new radix mmu model. Implement the page fault handler for this so we can run a tcg guest in radix mode and perform address translation correctly. In real mode (mmu turned off) addresses are masked to remove the top 4 bits and then are subject to partition scoped translation, since we only support pseries at this stage it is only necessary to perform the masking and then we're done. In virtual mode (mmu turned on) address translation if performed as follows: 1. Use the quadrant to determine the fully qualified address. The fully qualified address is defined as the combination of the effective address, the effective logical partition id (LPID) and the effective process id (PID). Based on the quadrant (EA63:62) we set the pid and lpid like so: quadrant 0: lpid = LPIDR, pid = PIDR quadrant 1: HV only (not allowed in pseries) quadrant 2: HV only (not allowed in pseries) quadrant 3: lpid = LPIDR, pid = 0 If we can't get the fully qualified address we raise a segment interrupt. 2. Find the guest radix tree We ask the virtual hypervisor for the partition table which was registered with H_REGISTER_PROC_TBL which points us to the process table in guest memory. We then index this table by pid to get the process table entry which points us to the appropriate radix tree to translate the address. If the process table isn't big enough to contain an entry for the current pid then we raise a storage interrupt. 3. Walk the radix tree Next we walk the radix tree where each level is a table of page directory entries indexed by some number of bits from the effective address, where the number of bits is determined by the table size. We continue to walk the tree (while entries are valid and the table is of minimum size) until we reach a table of page table entries, indicated by having the leaf bit set. The appropriate pte is then checked for sufficient access permissions, the reference and change bits are updated and the real address is calculated from the real page number bits of the pte and the low bits of the effective address. If we can't find an entry or can't access the entry bacause of permissions then we raise a storage interrupt. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> [dwg: Add missing parentheses to macro] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-05-02 09:37:17 +03:00
}
/* Read page <directory/table> entry from guest address space */
pde = ldq_phys(as, *pte_addr);
if (!(pde & R_PTE_VALID)) { /* Invalid Entry */
target/ppc: Implement ISA V3.00 radix page fault handler ISA V3.00 introduced a new radix mmu model. Implement the page fault handler for this so we can run a tcg guest in radix mode and perform address translation correctly. In real mode (mmu turned off) addresses are masked to remove the top 4 bits and then are subject to partition scoped translation, since we only support pseries at this stage it is only necessary to perform the masking and then we're done. In virtual mode (mmu turned on) address translation if performed as follows: 1. Use the quadrant to determine the fully qualified address. The fully qualified address is defined as the combination of the effective address, the effective logical partition id (LPID) and the effective process id (PID). Based on the quadrant (EA63:62) we set the pid and lpid like so: quadrant 0: lpid = LPIDR, pid = PIDR quadrant 1: HV only (not allowed in pseries) quadrant 2: HV only (not allowed in pseries) quadrant 3: lpid = LPIDR, pid = 0 If we can't get the fully qualified address we raise a segment interrupt. 2. Find the guest radix tree We ask the virtual hypervisor for the partition table which was registered with H_REGISTER_PROC_TBL which points us to the process table in guest memory. We then index this table by pid to get the process table entry which points us to the appropriate radix tree to translate the address. If the process table isn't big enough to contain an entry for the current pid then we raise a storage interrupt. 3. Walk the radix tree Next we walk the radix tree where each level is a table of page directory entries indexed by some number of bits from the effective address, where the number of bits is determined by the table size. We continue to walk the tree (while entries are valid and the table is of minimum size) until we reach a table of page table entries, indicated by having the leaf bit set. The appropriate pte is then checked for sufficient access permissions, the reference and change bits are updated and the real address is calculated from the real page number bits of the pte and the low bits of the effective address. If we can't find an entry or can't access the entry bacause of permissions then we raise a storage interrupt. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> [dwg: Add missing parentheses to macro] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-05-02 09:37:17 +03:00
*fault_cause |= DSISR_NOPTE;
return 1;
target/ppc: Implement ISA V3.00 radix page fault handler ISA V3.00 introduced a new radix mmu model. Implement the page fault handler for this so we can run a tcg guest in radix mode and perform address translation correctly. In real mode (mmu turned off) addresses are masked to remove the top 4 bits and then are subject to partition scoped translation, since we only support pseries at this stage it is only necessary to perform the masking and then we're done. In virtual mode (mmu turned on) address translation if performed as follows: 1. Use the quadrant to determine the fully qualified address. The fully qualified address is defined as the combination of the effective address, the effective logical partition id (LPID) and the effective process id (PID). Based on the quadrant (EA63:62) we set the pid and lpid like so: quadrant 0: lpid = LPIDR, pid = PIDR quadrant 1: HV only (not allowed in pseries) quadrant 2: HV only (not allowed in pseries) quadrant 3: lpid = LPIDR, pid = 0 If we can't get the fully qualified address we raise a segment interrupt. 2. Find the guest radix tree We ask the virtual hypervisor for the partition table which was registered with H_REGISTER_PROC_TBL which points us to the process table in guest memory. We then index this table by pid to get the process table entry which points us to the appropriate radix tree to translate the address. If the process table isn't big enough to contain an entry for the current pid then we raise a storage interrupt. 3. Walk the radix tree Next we walk the radix tree where each level is a table of page directory entries indexed by some number of bits from the effective address, where the number of bits is determined by the table size. We continue to walk the tree (while entries are valid and the table is of minimum size) until we reach a table of page table entries, indicated by having the leaf bit set. The appropriate pte is then checked for sufficient access permissions, the reference and change bits are updated and the real address is calculated from the real page number bits of the pte and the low bits of the effective address. If we can't find an entry or can't access the entry bacause of permissions then we raise a storage interrupt. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> [dwg: Add missing parentheses to macro] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-05-02 09:37:17 +03:00
}
*pte = pde;
*psize -= *nls;
if (!(pde & R_PTE_LEAF)) { /* Prepare for next iteration */
*nls = pde & R_PDE_NLS;
index = eaddr >> (*psize - *nls); /* Shift */
index &= ((1UL << *nls) - 1); /* Mask */
*pte_addr = (pde & R_PDE_NLB) + (index * sizeof(pde));
}
return 0;
}
target/ppc: Implement ISA V3.00 radix page fault handler ISA V3.00 introduced a new radix mmu model. Implement the page fault handler for this so we can run a tcg guest in radix mode and perform address translation correctly. In real mode (mmu turned off) addresses are masked to remove the top 4 bits and then are subject to partition scoped translation, since we only support pseries at this stage it is only necessary to perform the masking and then we're done. In virtual mode (mmu turned on) address translation if performed as follows: 1. Use the quadrant to determine the fully qualified address. The fully qualified address is defined as the combination of the effective address, the effective logical partition id (LPID) and the effective process id (PID). Based on the quadrant (EA63:62) we set the pid and lpid like so: quadrant 0: lpid = LPIDR, pid = PIDR quadrant 1: HV only (not allowed in pseries) quadrant 2: HV only (not allowed in pseries) quadrant 3: lpid = LPIDR, pid = 0 If we can't get the fully qualified address we raise a segment interrupt. 2. Find the guest radix tree We ask the virtual hypervisor for the partition table which was registered with H_REGISTER_PROC_TBL which points us to the process table in guest memory. We then index this table by pid to get the process table entry which points us to the appropriate radix tree to translate the address. If the process table isn't big enough to contain an entry for the current pid then we raise a storage interrupt. 3. Walk the radix tree Next we walk the radix tree where each level is a table of page directory entries indexed by some number of bits from the effective address, where the number of bits is determined by the table size. We continue to walk the tree (while entries are valid and the table is of minimum size) until we reach a table of page table entries, indicated by having the leaf bit set. The appropriate pte is then checked for sufficient access permissions, the reference and change bits are updated and the real address is calculated from the real page number bits of the pte and the low bits of the effective address. If we can't find an entry or can't access the entry bacause of permissions then we raise a storage interrupt. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> [dwg: Add missing parentheses to macro] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-05-02 09:37:17 +03:00
static int ppc_radix64_walk_tree(AddressSpace *as, vaddr eaddr,
uint64_t base_addr, uint64_t nls,
hwaddr *raddr, int *psize, uint64_t *pte,
int *fault_cause, hwaddr *pte_addr)
{
uint64_t index, pde, rpn , mask;
target/ppc: Implement ISA V3.00 radix page fault handler ISA V3.00 introduced a new radix mmu model. Implement the page fault handler for this so we can run a tcg guest in radix mode and perform address translation correctly. In real mode (mmu turned off) addresses are masked to remove the top 4 bits and then are subject to partition scoped translation, since we only support pseries at this stage it is only necessary to perform the masking and then we're done. In virtual mode (mmu turned on) address translation if performed as follows: 1. Use the quadrant to determine the fully qualified address. The fully qualified address is defined as the combination of the effective address, the effective logical partition id (LPID) and the effective process id (PID). Based on the quadrant (EA63:62) we set the pid and lpid like so: quadrant 0: lpid = LPIDR, pid = PIDR quadrant 1: HV only (not allowed in pseries) quadrant 2: HV only (not allowed in pseries) quadrant 3: lpid = LPIDR, pid = 0 If we can't get the fully qualified address we raise a segment interrupt. 2. Find the guest radix tree We ask the virtual hypervisor for the partition table which was registered with H_REGISTER_PROC_TBL which points us to the process table in guest memory. We then index this table by pid to get the process table entry which points us to the appropriate radix tree to translate the address. If the process table isn't big enough to contain an entry for the current pid then we raise a storage interrupt. 3. Walk the radix tree Next we walk the radix tree where each level is a table of page directory entries indexed by some number of bits from the effective address, where the number of bits is determined by the table size. We continue to walk the tree (while entries are valid and the table is of minimum size) until we reach a table of page table entries, indicated by having the leaf bit set. The appropriate pte is then checked for sufficient access permissions, the reference and change bits are updated and the real address is calculated from the real page number bits of the pte and the low bits of the effective address. If we can't find an entry or can't access the entry bacause of permissions then we raise a storage interrupt. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> [dwg: Add missing parentheses to macro] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-05-02 09:37:17 +03:00
if (nls < 5) { /* Directory maps less than 2**5 entries */
*fault_cause |= DSISR_R_BADCONFIG;
return 1;
target/ppc: Implement ISA V3.00 radix page fault handler ISA V3.00 introduced a new radix mmu model. Implement the page fault handler for this so we can run a tcg guest in radix mode and perform address translation correctly. In real mode (mmu turned off) addresses are masked to remove the top 4 bits and then are subject to partition scoped translation, since we only support pseries at this stage it is only necessary to perform the masking and then we're done. In virtual mode (mmu turned on) address translation if performed as follows: 1. Use the quadrant to determine the fully qualified address. The fully qualified address is defined as the combination of the effective address, the effective logical partition id (LPID) and the effective process id (PID). Based on the quadrant (EA63:62) we set the pid and lpid like so: quadrant 0: lpid = LPIDR, pid = PIDR quadrant 1: HV only (not allowed in pseries) quadrant 2: HV only (not allowed in pseries) quadrant 3: lpid = LPIDR, pid = 0 If we can't get the fully qualified address we raise a segment interrupt. 2. Find the guest radix tree We ask the virtual hypervisor for the partition table which was registered with H_REGISTER_PROC_TBL which points us to the process table in guest memory. We then index this table by pid to get the process table entry which points us to the appropriate radix tree to translate the address. If the process table isn't big enough to contain an entry for the current pid then we raise a storage interrupt. 3. Walk the radix tree Next we walk the radix tree where each level is a table of page directory entries indexed by some number of bits from the effective address, where the number of bits is determined by the table size. We continue to walk the tree (while entries are valid and the table is of minimum size) until we reach a table of page table entries, indicated by having the leaf bit set. The appropriate pte is then checked for sufficient access permissions, the reference and change bits are updated and the real address is calculated from the real page number bits of the pte and the low bits of the effective address. If we can't find an entry or can't access the entry bacause of permissions then we raise a storage interrupt. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> [dwg: Add missing parentheses to macro] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-05-02 09:37:17 +03:00
}
index = eaddr >> (*psize - nls); /* Shift */
index &= ((1UL << nls) - 1); /* Mask */
*pte_addr = base_addr + (index * sizeof(pde));
do {
int ret;
ret = ppc_radix64_next_level(as, eaddr, pte_addr, &nls, psize, &pde,
fault_cause);
if (ret) {
return ret;
}
} while (!(pde & R_PTE_LEAF));
*pte = pde;
rpn = pde & R_PTE_RPN;
mask = (1UL << *psize) - 1;
/* Or high bits of rpn and low bits to ea to form whole real addr */
*raddr = (rpn & ~mask) | (eaddr & mask);
return 0;
target/ppc: Implement ISA V3.00 radix page fault handler ISA V3.00 introduced a new radix mmu model. Implement the page fault handler for this so we can run a tcg guest in radix mode and perform address translation correctly. In real mode (mmu turned off) addresses are masked to remove the top 4 bits and then are subject to partition scoped translation, since we only support pseries at this stage it is only necessary to perform the masking and then we're done. In virtual mode (mmu turned on) address translation if performed as follows: 1. Use the quadrant to determine the fully qualified address. The fully qualified address is defined as the combination of the effective address, the effective logical partition id (LPID) and the effective process id (PID). Based on the quadrant (EA63:62) we set the pid and lpid like so: quadrant 0: lpid = LPIDR, pid = PIDR quadrant 1: HV only (not allowed in pseries) quadrant 2: HV only (not allowed in pseries) quadrant 3: lpid = LPIDR, pid = 0 If we can't get the fully qualified address we raise a segment interrupt. 2. Find the guest radix tree We ask the virtual hypervisor for the partition table which was registered with H_REGISTER_PROC_TBL which points us to the process table in guest memory. We then index this table by pid to get the process table entry which points us to the appropriate radix tree to translate the address. If the process table isn't big enough to contain an entry for the current pid then we raise a storage interrupt. 3. Walk the radix tree Next we walk the radix tree where each level is a table of page directory entries indexed by some number of bits from the effective address, where the number of bits is determined by the table size. We continue to walk the tree (while entries are valid and the table is of minimum size) until we reach a table of page table entries, indicated by having the leaf bit set. The appropriate pte is then checked for sufficient access permissions, the reference and change bits are updated and the real address is calculated from the real page number bits of the pte and the low bits of the effective address. If we can't find an entry or can't access the entry bacause of permissions then we raise a storage interrupt. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> [dwg: Add missing parentheses to macro] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-05-02 09:37:17 +03:00
}
static bool validate_pate(PowerPCCPU *cpu, uint64_t lpid, ppc_v3_pate_t *pate)
{
CPUPPCState *env = &cpu->env;
if (!(pate->dw0 & PATE0_HR)) {
return false;
}
if (lpid == 0 && !msr_hv) {
return false;
}
if ((pate->dw0 & PATE1_R_PRTS) < 5) {
return false;
}
/* More checks ... */
return true;
}
target/ppc: Add support for Radix partition-scoped translation The Radix tree translation model currently supports process-scoped translation for the PowerNV machine (Hypervisor mode) and for the pSeries machine (Guest mode). Guests running under an emulated Hypervisor (PowerNV machine) require a new type of Radix translation, called partition-scoped, which is missing today. The Radix tree translation is a 2 steps process. The first step, process-scoped translation, converts an effective Address to a guest real address, and the second step, partition-scoped translation, converts a guest real address to a host real address. There are difference cases to covers : * Hypervisor real mode access: no Radix translation. * Hypervisor or host application access (quadrant 0 and 3) with relocation on: process-scoped translation. * Guest OS real mode access: only partition-scoped translation. * Guest OS real or guest application access (quadrant 0 and 3) with relocation on: both process-scoped translation and partition-scoped translations. * Hypervisor access in quadrant 1 and 2 with relocation on: both process-scoped translation and partition-scoped translations. The radix tree partition-scoped translation is performed using tables pointed to by the first double-word of the Partition Table Entries and process-scoped translation uses tables pointed to by the Process Table Entries (second double-word of the Partition Table Entries). Both partition-scoped and process-scoped translations process are identical and thus the radix tree traversing code is largely reused. However, errors in partition-scoped translations generate hypervisor exceptions. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Signed-off-by: Greg Kurz <groug@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200403140056.59465-5-clg@kaod.org> [dwg: Fixup from Greg Kurz folded in] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-04-03 17:00:56 +03:00
static int ppc_radix64_partition_scoped_xlate(PowerPCCPU *cpu, int rwx,
vaddr eaddr, hwaddr g_raddr,
ppc_v3_pate_t pate,
hwaddr *h_raddr, int *h_prot,
int *h_page_size, bool pde_addr,
bool guest_visible)
target/ppc: Add support for Radix partition-scoped translation The Radix tree translation model currently supports process-scoped translation for the PowerNV machine (Hypervisor mode) and for the pSeries machine (Guest mode). Guests running under an emulated Hypervisor (PowerNV machine) require a new type of Radix translation, called partition-scoped, which is missing today. The Radix tree translation is a 2 steps process. The first step, process-scoped translation, converts an effective Address to a guest real address, and the second step, partition-scoped translation, converts a guest real address to a host real address. There are difference cases to covers : * Hypervisor real mode access: no Radix translation. * Hypervisor or host application access (quadrant 0 and 3) with relocation on: process-scoped translation. * Guest OS real mode access: only partition-scoped translation. * Guest OS real or guest application access (quadrant 0 and 3) with relocation on: both process-scoped translation and partition-scoped translations. * Hypervisor access in quadrant 1 and 2 with relocation on: both process-scoped translation and partition-scoped translations. The radix tree partition-scoped translation is performed using tables pointed to by the first double-word of the Partition Table Entries and process-scoped translation uses tables pointed to by the Process Table Entries (second double-word of the Partition Table Entries). Both partition-scoped and process-scoped translations process are identical and thus the radix tree traversing code is largely reused. However, errors in partition-scoped translations generate hypervisor exceptions. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Signed-off-by: Greg Kurz <groug@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200403140056.59465-5-clg@kaod.org> [dwg: Fixup from Greg Kurz folded in] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-04-03 17:00:56 +03:00
{
int fault_cause = 0;
hwaddr pte_addr;
uint64_t pte;
*h_page_size = PRTBE_R_GET_RTS(pate.dw0);
/* No valid pte or access denied due to protection */
if (ppc_radix64_walk_tree(CPU(cpu)->as, g_raddr, pate.dw0 & PRTBE_R_RPDB,
pate.dw0 & PRTBE_R_RPDS, h_raddr, h_page_size,
&pte, &fault_cause, &pte_addr) ||
ppc_radix64_check_prot(cpu, rwx, pte, &fault_cause, h_prot, true)) {
if (pde_addr) { /* address being translated was that of a guest pde */
target/ppc: Add support for Radix partition-scoped translation The Radix tree translation model currently supports process-scoped translation for the PowerNV machine (Hypervisor mode) and for the pSeries machine (Guest mode). Guests running under an emulated Hypervisor (PowerNV machine) require a new type of Radix translation, called partition-scoped, which is missing today. The Radix tree translation is a 2 steps process. The first step, process-scoped translation, converts an effective Address to a guest real address, and the second step, partition-scoped translation, converts a guest real address to a host real address. There are difference cases to covers : * Hypervisor real mode access: no Radix translation. * Hypervisor or host application access (quadrant 0 and 3) with relocation on: process-scoped translation. * Guest OS real mode access: only partition-scoped translation. * Guest OS real or guest application access (quadrant 0 and 3) with relocation on: both process-scoped translation and partition-scoped translations. * Hypervisor access in quadrant 1 and 2 with relocation on: both process-scoped translation and partition-scoped translations. The radix tree partition-scoped translation is performed using tables pointed to by the first double-word of the Partition Table Entries and process-scoped translation uses tables pointed to by the Process Table Entries (second double-word of the Partition Table Entries). Both partition-scoped and process-scoped translations process are identical and thus the radix tree traversing code is largely reused. However, errors in partition-scoped translations generate hypervisor exceptions. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Signed-off-by: Greg Kurz <groug@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200403140056.59465-5-clg@kaod.org> [dwg: Fixup from Greg Kurz folded in] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-04-03 17:00:56 +03:00
fault_cause |= DSISR_PRTABLE_FAULT;
}
if (guest_visible) {
target/ppc: Add support for Radix partition-scoped translation The Radix tree translation model currently supports process-scoped translation for the PowerNV machine (Hypervisor mode) and for the pSeries machine (Guest mode). Guests running under an emulated Hypervisor (PowerNV machine) require a new type of Radix translation, called partition-scoped, which is missing today. The Radix tree translation is a 2 steps process. The first step, process-scoped translation, converts an effective Address to a guest real address, and the second step, partition-scoped translation, converts a guest real address to a host real address. There are difference cases to covers : * Hypervisor real mode access: no Radix translation. * Hypervisor or host application access (quadrant 0 and 3) with relocation on: process-scoped translation. * Guest OS real mode access: only partition-scoped translation. * Guest OS real or guest application access (quadrant 0 and 3) with relocation on: both process-scoped translation and partition-scoped translations. * Hypervisor access in quadrant 1 and 2 with relocation on: both process-scoped translation and partition-scoped translations. The radix tree partition-scoped translation is performed using tables pointed to by the first double-word of the Partition Table Entries and process-scoped translation uses tables pointed to by the Process Table Entries (second double-word of the Partition Table Entries). Both partition-scoped and process-scoped translations process are identical and thus the radix tree traversing code is largely reused. However, errors in partition-scoped translations generate hypervisor exceptions. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Signed-off-by: Greg Kurz <groug@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200403140056.59465-5-clg@kaod.org> [dwg: Fixup from Greg Kurz folded in] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-04-03 17:00:56 +03:00
ppc_radix64_raise_hsi(cpu, rwx, eaddr, g_raddr, fault_cause);
}
return 1;
}
if (guest_visible) {
ppc_radix64_set_rc(cpu, rwx, pte, pte_addr, h_prot);
}
target/ppc: Add support for Radix partition-scoped translation The Radix tree translation model currently supports process-scoped translation for the PowerNV machine (Hypervisor mode) and for the pSeries machine (Guest mode). Guests running under an emulated Hypervisor (PowerNV machine) require a new type of Radix translation, called partition-scoped, which is missing today. The Radix tree translation is a 2 steps process. The first step, process-scoped translation, converts an effective Address to a guest real address, and the second step, partition-scoped translation, converts a guest real address to a host real address. There are difference cases to covers : * Hypervisor real mode access: no Radix translation. * Hypervisor or host application access (quadrant 0 and 3) with relocation on: process-scoped translation. * Guest OS real mode access: only partition-scoped translation. * Guest OS real or guest application access (quadrant 0 and 3) with relocation on: both process-scoped translation and partition-scoped translations. * Hypervisor access in quadrant 1 and 2 with relocation on: both process-scoped translation and partition-scoped translations. The radix tree partition-scoped translation is performed using tables pointed to by the first double-word of the Partition Table Entries and process-scoped translation uses tables pointed to by the Process Table Entries (second double-word of the Partition Table Entries). Both partition-scoped and process-scoped translations process are identical and thus the radix tree traversing code is largely reused. However, errors in partition-scoped translations generate hypervisor exceptions. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Signed-off-by: Greg Kurz <groug@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200403140056.59465-5-clg@kaod.org> [dwg: Fixup from Greg Kurz folded in] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-04-03 17:00:56 +03:00
return 0;
}
static int ppc_radix64_process_scoped_xlate(PowerPCCPU *cpu, int rwx,
vaddr eaddr, uint64_t pid,
ppc_v3_pate_t pate, hwaddr *g_raddr,
int *g_prot, int *g_page_size,
bool guest_visible)
{
CPUState *cs = CPU(cpu);
target/ppc: Add support for Radix partition-scoped translation The Radix tree translation model currently supports process-scoped translation for the PowerNV machine (Hypervisor mode) and for the pSeries machine (Guest mode). Guests running under an emulated Hypervisor (PowerNV machine) require a new type of Radix translation, called partition-scoped, which is missing today. The Radix tree translation is a 2 steps process. The first step, process-scoped translation, converts an effective Address to a guest real address, and the second step, partition-scoped translation, converts a guest real address to a host real address. There are difference cases to covers : * Hypervisor real mode access: no Radix translation. * Hypervisor or host application access (quadrant 0 and 3) with relocation on: process-scoped translation. * Guest OS real mode access: only partition-scoped translation. * Guest OS real or guest application access (quadrant 0 and 3) with relocation on: both process-scoped translation and partition-scoped translations. * Hypervisor access in quadrant 1 and 2 with relocation on: both process-scoped translation and partition-scoped translations. The radix tree partition-scoped translation is performed using tables pointed to by the first double-word of the Partition Table Entries and process-scoped translation uses tables pointed to by the Process Table Entries (second double-word of the Partition Table Entries). Both partition-scoped and process-scoped translations process are identical and thus the radix tree traversing code is largely reused. However, errors in partition-scoped translations generate hypervisor exceptions. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Signed-off-by: Greg Kurz <groug@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200403140056.59465-5-clg@kaod.org> [dwg: Fixup from Greg Kurz folded in] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-04-03 17:00:56 +03:00
CPUPPCState *env = &cpu->env;
uint64_t offset, size, prtbe_addr, prtbe0, base_addr, nls, index, pte;
int fault_cause = 0, h_page_size, h_prot;
hwaddr h_raddr, pte_addr;
int ret;
/* Index Process Table by PID to Find Corresponding Process Table Entry */
offset = pid * sizeof(struct prtb_entry);
size = 1ULL << ((pate.dw1 & PATE1_R_PRTS) + 12);
if (offset >= size) {
/* offset exceeds size of the process table */
if (guest_visible) {
ppc_radix64_raise_si(cpu, rwx, eaddr, DSISR_NOPTE);
}
return 1;
}
prtbe_addr = (pate.dw1 & PATE1_R_PRTB) + offset;
target/ppc: Add support for Radix partition-scoped translation The Radix tree translation model currently supports process-scoped translation for the PowerNV machine (Hypervisor mode) and for the pSeries machine (Guest mode). Guests running under an emulated Hypervisor (PowerNV machine) require a new type of Radix translation, called partition-scoped, which is missing today. The Radix tree translation is a 2 steps process. The first step, process-scoped translation, converts an effective Address to a guest real address, and the second step, partition-scoped translation, converts a guest real address to a host real address. There are difference cases to covers : * Hypervisor real mode access: no Radix translation. * Hypervisor or host application access (quadrant 0 and 3) with relocation on: process-scoped translation. * Guest OS real mode access: only partition-scoped translation. * Guest OS real or guest application access (quadrant 0 and 3) with relocation on: both process-scoped translation and partition-scoped translations. * Hypervisor access in quadrant 1 and 2 with relocation on: both process-scoped translation and partition-scoped translations. The radix tree partition-scoped translation is performed using tables pointed to by the first double-word of the Partition Table Entries and process-scoped translation uses tables pointed to by the Process Table Entries (second double-word of the Partition Table Entries). Both partition-scoped and process-scoped translations process are identical and thus the radix tree traversing code is largely reused. However, errors in partition-scoped translations generate hypervisor exceptions. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Signed-off-by: Greg Kurz <groug@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200403140056.59465-5-clg@kaod.org> [dwg: Fixup from Greg Kurz folded in] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-04-03 17:00:56 +03:00
if (cpu->vhyp) {
prtbe0 = ldq_phys(cs->as, prtbe_addr);
} else {
/*
* Process table addresses are subject to partition-scoped
* translation
*
* On a Radix host, the partition-scoped page table for LPID=0
* is only used to translate the effective addresses of the
* process table entries.
*/
ret = ppc_radix64_partition_scoped_xlate(cpu, 0, eaddr, prtbe_addr,
pate, &h_raddr, &h_prot,
&h_page_size, true,
guest_visible);
target/ppc: Add support for Radix partition-scoped translation The Radix tree translation model currently supports process-scoped translation for the PowerNV machine (Hypervisor mode) and for the pSeries machine (Guest mode). Guests running under an emulated Hypervisor (PowerNV machine) require a new type of Radix translation, called partition-scoped, which is missing today. The Radix tree translation is a 2 steps process. The first step, process-scoped translation, converts an effective Address to a guest real address, and the second step, partition-scoped translation, converts a guest real address to a host real address. There are difference cases to covers : * Hypervisor real mode access: no Radix translation. * Hypervisor or host application access (quadrant 0 and 3) with relocation on: process-scoped translation. * Guest OS real mode access: only partition-scoped translation. * Guest OS real or guest application access (quadrant 0 and 3) with relocation on: both process-scoped translation and partition-scoped translations. * Hypervisor access in quadrant 1 and 2 with relocation on: both process-scoped translation and partition-scoped translations. The radix tree partition-scoped translation is performed using tables pointed to by the first double-word of the Partition Table Entries and process-scoped translation uses tables pointed to by the Process Table Entries (second double-word of the Partition Table Entries). Both partition-scoped and process-scoped translations process are identical and thus the radix tree traversing code is largely reused. However, errors in partition-scoped translations generate hypervisor exceptions. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Signed-off-by: Greg Kurz <groug@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200403140056.59465-5-clg@kaod.org> [dwg: Fixup from Greg Kurz folded in] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-04-03 17:00:56 +03:00
if (ret) {
return ret;
}
prtbe0 = ldq_phys(cs->as, h_raddr);
}
/* Walk Radix Tree from Process Table Entry to Convert EA to RA */
*g_page_size = PRTBE_R_GET_RTS(prtbe0);
target/ppc: Add support for Radix partition-scoped translation The Radix tree translation model currently supports process-scoped translation for the PowerNV machine (Hypervisor mode) and for the pSeries machine (Guest mode). Guests running under an emulated Hypervisor (PowerNV machine) require a new type of Radix translation, called partition-scoped, which is missing today. The Radix tree translation is a 2 steps process. The first step, process-scoped translation, converts an effective Address to a guest real address, and the second step, partition-scoped translation, converts a guest real address to a host real address. There are difference cases to covers : * Hypervisor real mode access: no Radix translation. * Hypervisor or host application access (quadrant 0 and 3) with relocation on: process-scoped translation. * Guest OS real mode access: only partition-scoped translation. * Guest OS real or guest application access (quadrant 0 and 3) with relocation on: both process-scoped translation and partition-scoped translations. * Hypervisor access in quadrant 1 and 2 with relocation on: both process-scoped translation and partition-scoped translations. The radix tree partition-scoped translation is performed using tables pointed to by the first double-word of the Partition Table Entries and process-scoped translation uses tables pointed to by the Process Table Entries (second double-word of the Partition Table Entries). Both partition-scoped and process-scoped translations process are identical and thus the radix tree traversing code is largely reused. However, errors in partition-scoped translations generate hypervisor exceptions. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Signed-off-by: Greg Kurz <groug@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200403140056.59465-5-clg@kaod.org> [dwg: Fixup from Greg Kurz folded in] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-04-03 17:00:56 +03:00
base_addr = prtbe0 & PRTBE_R_RPDB;
nls = prtbe0 & PRTBE_R_RPDS;
if (msr_hv || cpu->vhyp) {
/*
* Can treat process table addresses as real addresses
*/
ret = ppc_radix64_walk_tree(cs->as, eaddr & R_EADDR_MASK, base_addr,
nls, g_raddr, g_page_size, &pte,
&fault_cause, &pte_addr);
if (ret) {
/* No valid PTE */
if (guest_visible) {
target/ppc: Add support for Radix partition-scoped translation The Radix tree translation model currently supports process-scoped translation for the PowerNV machine (Hypervisor mode) and for the pSeries machine (Guest mode). Guests running under an emulated Hypervisor (PowerNV machine) require a new type of Radix translation, called partition-scoped, which is missing today. The Radix tree translation is a 2 steps process. The first step, process-scoped translation, converts an effective Address to a guest real address, and the second step, partition-scoped translation, converts a guest real address to a host real address. There are difference cases to covers : * Hypervisor real mode access: no Radix translation. * Hypervisor or host application access (quadrant 0 and 3) with relocation on: process-scoped translation. * Guest OS real mode access: only partition-scoped translation. * Guest OS real or guest application access (quadrant 0 and 3) with relocation on: both process-scoped translation and partition-scoped translations. * Hypervisor access in quadrant 1 and 2 with relocation on: both process-scoped translation and partition-scoped translations. The radix tree partition-scoped translation is performed using tables pointed to by the first double-word of the Partition Table Entries and process-scoped translation uses tables pointed to by the Process Table Entries (second double-word of the Partition Table Entries). Both partition-scoped and process-scoped translations process are identical and thus the radix tree traversing code is largely reused. However, errors in partition-scoped translations generate hypervisor exceptions. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Signed-off-by: Greg Kurz <groug@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200403140056.59465-5-clg@kaod.org> [dwg: Fixup from Greg Kurz folded in] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-04-03 17:00:56 +03:00
ppc_radix64_raise_si(cpu, rwx, eaddr, fault_cause);
}
return ret;
}
} else {
uint64_t rpn, mask;
index = (eaddr & R_EADDR_MASK) >> (*g_page_size - nls); /* Shift */
index &= ((1UL << nls) - 1); /* Mask */
pte_addr = base_addr + (index * sizeof(pte));
/*
* Each process table address is subject to a partition-scoped
* translation
*/
do {
ret = ppc_radix64_partition_scoped_xlate(cpu, 0, eaddr, pte_addr,
pate, &h_raddr, &h_prot,
&h_page_size, true,
guest_visible);
target/ppc: Add support for Radix partition-scoped translation The Radix tree translation model currently supports process-scoped translation for the PowerNV machine (Hypervisor mode) and for the pSeries machine (Guest mode). Guests running under an emulated Hypervisor (PowerNV machine) require a new type of Radix translation, called partition-scoped, which is missing today. The Radix tree translation is a 2 steps process. The first step, process-scoped translation, converts an effective Address to a guest real address, and the second step, partition-scoped translation, converts a guest real address to a host real address. There are difference cases to covers : * Hypervisor real mode access: no Radix translation. * Hypervisor or host application access (quadrant 0 and 3) with relocation on: process-scoped translation. * Guest OS real mode access: only partition-scoped translation. * Guest OS real or guest application access (quadrant 0 and 3) with relocation on: both process-scoped translation and partition-scoped translations. * Hypervisor access in quadrant 1 and 2 with relocation on: both process-scoped translation and partition-scoped translations. The radix tree partition-scoped translation is performed using tables pointed to by the first double-word of the Partition Table Entries and process-scoped translation uses tables pointed to by the Process Table Entries (second double-word of the Partition Table Entries). Both partition-scoped and process-scoped translations process are identical and thus the radix tree traversing code is largely reused. However, errors in partition-scoped translations generate hypervisor exceptions. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Signed-off-by: Greg Kurz <groug@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200403140056.59465-5-clg@kaod.org> [dwg: Fixup from Greg Kurz folded in] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-04-03 17:00:56 +03:00
if (ret) {
return ret;
}
ret = ppc_radix64_next_level(cs->as, eaddr & R_EADDR_MASK, &h_raddr,
&nls, g_page_size, &pte, &fault_cause);
if (ret) {
/* No valid pte */
if (guest_visible) {
target/ppc: Add support for Radix partition-scoped translation The Radix tree translation model currently supports process-scoped translation for the PowerNV machine (Hypervisor mode) and for the pSeries machine (Guest mode). Guests running under an emulated Hypervisor (PowerNV machine) require a new type of Radix translation, called partition-scoped, which is missing today. The Radix tree translation is a 2 steps process. The first step, process-scoped translation, converts an effective Address to a guest real address, and the second step, partition-scoped translation, converts a guest real address to a host real address. There are difference cases to covers : * Hypervisor real mode access: no Radix translation. * Hypervisor or host application access (quadrant 0 and 3) with relocation on: process-scoped translation. * Guest OS real mode access: only partition-scoped translation. * Guest OS real or guest application access (quadrant 0 and 3) with relocation on: both process-scoped translation and partition-scoped translations. * Hypervisor access in quadrant 1 and 2 with relocation on: both process-scoped translation and partition-scoped translations. The radix tree partition-scoped translation is performed using tables pointed to by the first double-word of the Partition Table Entries and process-scoped translation uses tables pointed to by the Process Table Entries (second double-word of the Partition Table Entries). Both partition-scoped and process-scoped translations process are identical and thus the radix tree traversing code is largely reused. However, errors in partition-scoped translations generate hypervisor exceptions. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Signed-off-by: Greg Kurz <groug@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200403140056.59465-5-clg@kaod.org> [dwg: Fixup from Greg Kurz folded in] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-04-03 17:00:56 +03:00
ppc_radix64_raise_si(cpu, rwx, eaddr, fault_cause);
}
return ret;
}
pte_addr = h_raddr;
} while (!(pte & R_PTE_LEAF));
rpn = pte & R_PTE_RPN;
mask = (1UL << *g_page_size) - 1;
/* Or high bits of rpn and low bits to ea to form whole real addr */
*g_raddr = (rpn & ~mask) | (eaddr & mask);
}
if (ppc_radix64_check_prot(cpu, rwx, pte, &fault_cause, g_prot, false)) {
/* Access denied due to protection */
if (guest_visible) {
ppc_radix64_raise_si(cpu, rwx, eaddr, fault_cause);
}
return 1;
}
if (guest_visible) {
ppc_radix64_set_rc(cpu, rwx, pte, pte_addr, g_prot);
}
return 0;
}
target/ppc: Add support for Radix partition-scoped translation The Radix tree translation model currently supports process-scoped translation for the PowerNV machine (Hypervisor mode) and for the pSeries machine (Guest mode). Guests running under an emulated Hypervisor (PowerNV machine) require a new type of Radix translation, called partition-scoped, which is missing today. The Radix tree translation is a 2 steps process. The first step, process-scoped translation, converts an effective Address to a guest real address, and the second step, partition-scoped translation, converts a guest real address to a host real address. There are difference cases to covers : * Hypervisor real mode access: no Radix translation. * Hypervisor or host application access (quadrant 0 and 3) with relocation on: process-scoped translation. * Guest OS real mode access: only partition-scoped translation. * Guest OS real or guest application access (quadrant 0 and 3) with relocation on: both process-scoped translation and partition-scoped translations. * Hypervisor access in quadrant 1 and 2 with relocation on: both process-scoped translation and partition-scoped translations. The radix tree partition-scoped translation is performed using tables pointed to by the first double-word of the Partition Table Entries and process-scoped translation uses tables pointed to by the Process Table Entries (second double-word of the Partition Table Entries). Both partition-scoped and process-scoped translations process are identical and thus the radix tree traversing code is largely reused. However, errors in partition-scoped translations generate hypervisor exceptions. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Signed-off-by: Greg Kurz <groug@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200403140056.59465-5-clg@kaod.org> [dwg: Fixup from Greg Kurz folded in] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-04-03 17:00:56 +03:00
/*
* Radix tree translation is a 2 steps translation process:
*
* 1. Process-scoped translation: Guest Eff Addr -> Guest Real Addr
* 2. Partition-scoped translation: Guest Real Addr -> Host Real Addr
*
* MSR[HV]
* +-------------+----------------+---------------+
* | | HV = 0 | HV = 1 |
* +-------------+----------------+---------------+
* | Relocation | Partition | No |
* | = Off | Scoped | Translation |
* Relocation +-------------+----------------+---------------+
* | Relocation | Partition & | Process |
* | = On | Process Scoped | Scoped |
* +-------------+----------------+---------------+
*/
static int ppc_radix64_xlate(PowerPCCPU *cpu, vaddr eaddr, int rwx,
bool relocation,
hwaddr *raddr, int *psizep, int *protp,
bool guest_visible)
{
target/ppc: Add support for Radix partition-scoped translation The Radix tree translation model currently supports process-scoped translation for the PowerNV machine (Hypervisor mode) and for the pSeries machine (Guest mode). Guests running under an emulated Hypervisor (PowerNV machine) require a new type of Radix translation, called partition-scoped, which is missing today. The Radix tree translation is a 2 steps process. The first step, process-scoped translation, converts an effective Address to a guest real address, and the second step, partition-scoped translation, converts a guest real address to a host real address. There are difference cases to covers : * Hypervisor real mode access: no Radix translation. * Hypervisor or host application access (quadrant 0 and 3) with relocation on: process-scoped translation. * Guest OS real mode access: only partition-scoped translation. * Guest OS real or guest application access (quadrant 0 and 3) with relocation on: both process-scoped translation and partition-scoped translations. * Hypervisor access in quadrant 1 and 2 with relocation on: both process-scoped translation and partition-scoped translations. The radix tree partition-scoped translation is performed using tables pointed to by the first double-word of the Partition Table Entries and process-scoped translation uses tables pointed to by the Process Table Entries (second double-word of the Partition Table Entries). Both partition-scoped and process-scoped translations process are identical and thus the radix tree traversing code is largely reused. However, errors in partition-scoped translations generate hypervisor exceptions. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Signed-off-by: Greg Kurz <groug@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200403140056.59465-5-clg@kaod.org> [dwg: Fixup from Greg Kurz folded in] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-04-03 17:00:56 +03:00
CPUPPCState *env = &cpu->env;
uint64_t lpid, pid;
ppc_v3_pate_t pate;
int psize, prot;
hwaddr g_raddr;
/* Virtual Mode Access - get the fully qualified address */
if (!ppc_radix64_get_fully_qualified_addr(&cpu->env, eaddr, &lpid, &pid)) {
if (guest_visible) {
ppc_radix64_raise_segi(cpu, rwx, eaddr);
}
return 1;
}
/* Get Process Table */
if (cpu->vhyp) {
PPCVirtualHypervisorClass *vhc;
vhc = PPC_VIRTUAL_HYPERVISOR_GET_CLASS(cpu->vhyp);
vhc->get_pate(cpu->vhyp, &pate);
} else {
if (!ppc64_v3_get_pate(cpu, lpid, &pate)) {
if (guest_visible) {
ppc_radix64_raise_si(cpu, rwx, eaddr, DSISR_NOPTE);
}
return 1;
}
if (!validate_pate(cpu, lpid, &pate)) {
if (guest_visible) {
ppc_radix64_raise_si(cpu, rwx, eaddr, DSISR_R_BADCONFIG);
}
return 1;
}
}
*psizep = INT_MAX;
*protp = PAGE_READ | PAGE_WRITE | PAGE_EXEC;
/*
* Perform process-scoped translation if relocation enabled.
*
* - Translates an effective address to a host real address in
* quadrants 0 and 3 when HV=1.
target/ppc: Add support for Radix partition-scoped translation The Radix tree translation model currently supports process-scoped translation for the PowerNV machine (Hypervisor mode) and for the pSeries machine (Guest mode). Guests running under an emulated Hypervisor (PowerNV machine) require a new type of Radix translation, called partition-scoped, which is missing today. The Radix tree translation is a 2 steps process. The first step, process-scoped translation, converts an effective Address to a guest real address, and the second step, partition-scoped translation, converts a guest real address to a host real address. There are difference cases to covers : * Hypervisor real mode access: no Radix translation. * Hypervisor or host application access (quadrant 0 and 3) with relocation on: process-scoped translation. * Guest OS real mode access: only partition-scoped translation. * Guest OS real or guest application access (quadrant 0 and 3) with relocation on: both process-scoped translation and partition-scoped translations. * Hypervisor access in quadrant 1 and 2 with relocation on: both process-scoped translation and partition-scoped translations. The radix tree partition-scoped translation is performed using tables pointed to by the first double-word of the Partition Table Entries and process-scoped translation uses tables pointed to by the Process Table Entries (second double-word of the Partition Table Entries). Both partition-scoped and process-scoped translations process are identical and thus the radix tree traversing code is largely reused. However, errors in partition-scoped translations generate hypervisor exceptions. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Signed-off-by: Greg Kurz <groug@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200403140056.59465-5-clg@kaod.org> [dwg: Fixup from Greg Kurz folded in] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-04-03 17:00:56 +03:00
*
* - Translates an effective address to a guest real address.
*/
if (relocation) {
int ret = ppc_radix64_process_scoped_xlate(cpu, rwx, eaddr, pid,
pate, &g_raddr, &prot,
&psize, guest_visible);
if (ret) {
return ret;
}
*psizep = MIN(*psizep, psize);
*protp &= prot;
} else {
g_raddr = eaddr & R_EADDR_MASK;
}
target/ppc: Add support for Radix partition-scoped translation The Radix tree translation model currently supports process-scoped translation for the PowerNV machine (Hypervisor mode) and for the pSeries machine (Guest mode). Guests running under an emulated Hypervisor (PowerNV machine) require a new type of Radix translation, called partition-scoped, which is missing today. The Radix tree translation is a 2 steps process. The first step, process-scoped translation, converts an effective Address to a guest real address, and the second step, partition-scoped translation, converts a guest real address to a host real address. There are difference cases to covers : * Hypervisor real mode access: no Radix translation. * Hypervisor or host application access (quadrant 0 and 3) with relocation on: process-scoped translation. * Guest OS real mode access: only partition-scoped translation. * Guest OS real or guest application access (quadrant 0 and 3) with relocation on: both process-scoped translation and partition-scoped translations. * Hypervisor access in quadrant 1 and 2 with relocation on: both process-scoped translation and partition-scoped translations. The radix tree partition-scoped translation is performed using tables pointed to by the first double-word of the Partition Table Entries and process-scoped translation uses tables pointed to by the Process Table Entries (second double-word of the Partition Table Entries). Both partition-scoped and process-scoped translations process are identical and thus the radix tree traversing code is largely reused. However, errors in partition-scoped translations generate hypervisor exceptions. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Signed-off-by: Greg Kurz <groug@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200403140056.59465-5-clg@kaod.org> [dwg: Fixup from Greg Kurz folded in] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-04-03 17:00:56 +03:00
if (cpu->vhyp) {
*raddr = g_raddr;
} else {
/*
* Perform partition-scoped translation if !HV or HV access to
* quadrants 1 or 2. Translates a guest real address to a host
* real address.
*/
if (lpid || !msr_hv) {
int ret;
ret = ppc_radix64_partition_scoped_xlate(cpu, rwx, eaddr, g_raddr,
pate, raddr, &prot, &psize,
false, guest_visible);
target/ppc: Add support for Radix partition-scoped translation The Radix tree translation model currently supports process-scoped translation for the PowerNV machine (Hypervisor mode) and for the pSeries machine (Guest mode). Guests running under an emulated Hypervisor (PowerNV machine) require a new type of Radix translation, called partition-scoped, which is missing today. The Radix tree translation is a 2 steps process. The first step, process-scoped translation, converts an effective Address to a guest real address, and the second step, partition-scoped translation, converts a guest real address to a host real address. There are difference cases to covers : * Hypervisor real mode access: no Radix translation. * Hypervisor or host application access (quadrant 0 and 3) with relocation on: process-scoped translation. * Guest OS real mode access: only partition-scoped translation. * Guest OS real or guest application access (quadrant 0 and 3) with relocation on: both process-scoped translation and partition-scoped translations. * Hypervisor access in quadrant 1 and 2 with relocation on: both process-scoped translation and partition-scoped translations. The radix tree partition-scoped translation is performed using tables pointed to by the first double-word of the Partition Table Entries and process-scoped translation uses tables pointed to by the Process Table Entries (second double-word of the Partition Table Entries). Both partition-scoped and process-scoped translations process are identical and thus the radix tree traversing code is largely reused. However, errors in partition-scoped translations generate hypervisor exceptions. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Signed-off-by: Greg Kurz <groug@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200403140056.59465-5-clg@kaod.org> [dwg: Fixup from Greg Kurz folded in] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-04-03 17:00:56 +03:00
if (ret) {
return ret;
}
*psizep = MIN(*psizep, psize);
*protp &= prot;
} else {
*raddr = g_raddr;
}
}
return 0;
}
target/ppc: Implement ISA V3.00 radix page fault handler ISA V3.00 introduced a new radix mmu model. Implement the page fault handler for this so we can run a tcg guest in radix mode and perform address translation correctly. In real mode (mmu turned off) addresses are masked to remove the top 4 bits and then are subject to partition scoped translation, since we only support pseries at this stage it is only necessary to perform the masking and then we're done. In virtual mode (mmu turned on) address translation if performed as follows: 1. Use the quadrant to determine the fully qualified address. The fully qualified address is defined as the combination of the effective address, the effective logical partition id (LPID) and the effective process id (PID). Based on the quadrant (EA63:62) we set the pid and lpid like so: quadrant 0: lpid = LPIDR, pid = PIDR quadrant 1: HV only (not allowed in pseries) quadrant 2: HV only (not allowed in pseries) quadrant 3: lpid = LPIDR, pid = 0 If we can't get the fully qualified address we raise a segment interrupt. 2. Find the guest radix tree We ask the virtual hypervisor for the partition table which was registered with H_REGISTER_PROC_TBL which points us to the process table in guest memory. We then index this table by pid to get the process table entry which points us to the appropriate radix tree to translate the address. If the process table isn't big enough to contain an entry for the current pid then we raise a storage interrupt. 3. Walk the radix tree Next we walk the radix tree where each level is a table of page directory entries indexed by some number of bits from the effective address, where the number of bits is determined by the table size. We continue to walk the tree (while entries are valid and the table is of minimum size) until we reach a table of page table entries, indicated by having the leaf bit set. The appropriate pte is then checked for sufficient access permissions, the reference and change bits are updated and the real address is calculated from the real page number bits of the pte and the low bits of the effective address. If we can't find an entry or can't access the entry bacause of permissions then we raise a storage interrupt. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> [dwg: Add missing parentheses to macro] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-05-02 09:37:17 +03:00
int ppc_radix64_handle_mmu_fault(PowerPCCPU *cpu, vaddr eaddr, int rwx,
int mmu_idx)
{
CPUState *cs = CPU(cpu);
CPUPPCState *env = &cpu->env;
int page_size, prot;
bool relocation;
hwaddr raddr;
target/ppc: Implement ISA V3.00 radix page fault handler ISA V3.00 introduced a new radix mmu model. Implement the page fault handler for this so we can run a tcg guest in radix mode and perform address translation correctly. In real mode (mmu turned off) addresses are masked to remove the top 4 bits and then are subject to partition scoped translation, since we only support pseries at this stage it is only necessary to perform the masking and then we're done. In virtual mode (mmu turned on) address translation if performed as follows: 1. Use the quadrant to determine the fully qualified address. The fully qualified address is defined as the combination of the effective address, the effective logical partition id (LPID) and the effective process id (PID). Based on the quadrant (EA63:62) we set the pid and lpid like so: quadrant 0: lpid = LPIDR, pid = PIDR quadrant 1: HV only (not allowed in pseries) quadrant 2: HV only (not allowed in pseries) quadrant 3: lpid = LPIDR, pid = 0 If we can't get the fully qualified address we raise a segment interrupt. 2. Find the guest radix tree We ask the virtual hypervisor for the partition table which was registered with H_REGISTER_PROC_TBL which points us to the process table in guest memory. We then index this table by pid to get the process table entry which points us to the appropriate radix tree to translate the address. If the process table isn't big enough to contain an entry for the current pid then we raise a storage interrupt. 3. Walk the radix tree Next we walk the radix tree where each level is a table of page directory entries indexed by some number of bits from the effective address, where the number of bits is determined by the table size. We continue to walk the tree (while entries are valid and the table is of minimum size) until we reach a table of page table entries, indicated by having the leaf bit set. The appropriate pte is then checked for sufficient access permissions, the reference and change bits are updated and the real address is calculated from the real page number bits of the pte and the low bits of the effective address. If we can't find an entry or can't access the entry bacause of permissions then we raise a storage interrupt. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> [dwg: Add missing parentheses to macro] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-05-02 09:37:17 +03:00
assert(!(msr_hv && cpu->vhyp));
target/ppc: Implement ISA V3.00 radix page fault handler ISA V3.00 introduced a new radix mmu model. Implement the page fault handler for this so we can run a tcg guest in radix mode and perform address translation correctly. In real mode (mmu turned off) addresses are masked to remove the top 4 bits and then are subject to partition scoped translation, since we only support pseries at this stage it is only necessary to perform the masking and then we're done. In virtual mode (mmu turned on) address translation if performed as follows: 1. Use the quadrant to determine the fully qualified address. The fully qualified address is defined as the combination of the effective address, the effective logical partition id (LPID) and the effective process id (PID). Based on the quadrant (EA63:62) we set the pid and lpid like so: quadrant 0: lpid = LPIDR, pid = PIDR quadrant 1: HV only (not allowed in pseries) quadrant 2: HV only (not allowed in pseries) quadrant 3: lpid = LPIDR, pid = 0 If we can't get the fully qualified address we raise a segment interrupt. 2. Find the guest radix tree We ask the virtual hypervisor for the partition table which was registered with H_REGISTER_PROC_TBL which points us to the process table in guest memory. We then index this table by pid to get the process table entry which points us to the appropriate radix tree to translate the address. If the process table isn't big enough to contain an entry for the current pid then we raise a storage interrupt. 3. Walk the radix tree Next we walk the radix tree where each level is a table of page directory entries indexed by some number of bits from the effective address, where the number of bits is determined by the table size. We continue to walk the tree (while entries are valid and the table is of minimum size) until we reach a table of page table entries, indicated by having the leaf bit set. The appropriate pte is then checked for sufficient access permissions, the reference and change bits are updated and the real address is calculated from the real page number bits of the pte and the low bits of the effective address. If we can't find an entry or can't access the entry bacause of permissions then we raise a storage interrupt. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> [dwg: Add missing parentheses to macro] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-05-02 09:37:17 +03:00
assert((rwx == 0) || (rwx == 1) || (rwx == 2));
relocation = ((rwx == 2) && (msr_ir == 1)) || ((rwx != 2) && (msr_dr == 1));
/* HV or virtual hypervisor Real Mode Access */
if (!relocation && (msr_hv || cpu->vhyp)) {
target/ppc: Implement ISA V3.00 radix page fault handler ISA V3.00 introduced a new radix mmu model. Implement the page fault handler for this so we can run a tcg guest in radix mode and perform address translation correctly. In real mode (mmu turned off) addresses are masked to remove the top 4 bits and then are subject to partition scoped translation, since we only support pseries at this stage it is only necessary to perform the masking and then we're done. In virtual mode (mmu turned on) address translation if performed as follows: 1. Use the quadrant to determine the fully qualified address. The fully qualified address is defined as the combination of the effective address, the effective logical partition id (LPID) and the effective process id (PID). Based on the quadrant (EA63:62) we set the pid and lpid like so: quadrant 0: lpid = LPIDR, pid = PIDR quadrant 1: HV only (not allowed in pseries) quadrant 2: HV only (not allowed in pseries) quadrant 3: lpid = LPIDR, pid = 0 If we can't get the fully qualified address we raise a segment interrupt. 2. Find the guest radix tree We ask the virtual hypervisor for the partition table which was registered with H_REGISTER_PROC_TBL which points us to the process table in guest memory. We then index this table by pid to get the process table entry which points us to the appropriate radix tree to translate the address. If the process table isn't big enough to contain an entry for the current pid then we raise a storage interrupt. 3. Walk the radix tree Next we walk the radix tree where each level is a table of page directory entries indexed by some number of bits from the effective address, where the number of bits is determined by the table size. We continue to walk the tree (while entries are valid and the table is of minimum size) until we reach a table of page table entries, indicated by having the leaf bit set. The appropriate pte is then checked for sufficient access permissions, the reference and change bits are updated and the real address is calculated from the real page number bits of the pte and the low bits of the effective address. If we can't find an entry or can't access the entry bacause of permissions then we raise a storage interrupt. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> [dwg: Add missing parentheses to macro] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-05-02 09:37:17 +03:00
/* In real mode top 4 effective addr bits (mostly) ignored */
raddr = eaddr & 0x0FFFFFFFFFFFFFFFULL;
/* In HV mode, add HRMOR if top EA bit is clear */
if (msr_hv || !env->has_hv_mode) {
if (!(eaddr >> 63)) {
raddr |= env->spr[SPR_HRMOR];
}
}
target/ppc: Implement ISA V3.00 radix page fault handler ISA V3.00 introduced a new radix mmu model. Implement the page fault handler for this so we can run a tcg guest in radix mode and perform address translation correctly. In real mode (mmu turned off) addresses are masked to remove the top 4 bits and then are subject to partition scoped translation, since we only support pseries at this stage it is only necessary to perform the masking and then we're done. In virtual mode (mmu turned on) address translation if performed as follows: 1. Use the quadrant to determine the fully qualified address. The fully qualified address is defined as the combination of the effective address, the effective logical partition id (LPID) and the effective process id (PID). Based on the quadrant (EA63:62) we set the pid and lpid like so: quadrant 0: lpid = LPIDR, pid = PIDR quadrant 1: HV only (not allowed in pseries) quadrant 2: HV only (not allowed in pseries) quadrant 3: lpid = LPIDR, pid = 0 If we can't get the fully qualified address we raise a segment interrupt. 2. Find the guest radix tree We ask the virtual hypervisor for the partition table which was registered with H_REGISTER_PROC_TBL which points us to the process table in guest memory. We then index this table by pid to get the process table entry which points us to the appropriate radix tree to translate the address. If the process table isn't big enough to contain an entry for the current pid then we raise a storage interrupt. 3. Walk the radix tree Next we walk the radix tree where each level is a table of page directory entries indexed by some number of bits from the effective address, where the number of bits is determined by the table size. We continue to walk the tree (while entries are valid and the table is of minimum size) until we reach a table of page table entries, indicated by having the leaf bit set. The appropriate pte is then checked for sufficient access permissions, the reference and change bits are updated and the real address is calculated from the real page number bits of the pte and the low bits of the effective address. If we can't find an entry or can't access the entry bacause of permissions then we raise a storage interrupt. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> [dwg: Add missing parentheses to macro] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-05-02 09:37:17 +03:00
tlb_set_page(cs, eaddr & TARGET_PAGE_MASK, raddr & TARGET_PAGE_MASK,
PAGE_READ | PAGE_WRITE | PAGE_EXEC, mmu_idx,
TARGET_PAGE_SIZE);
return 0;
}
/*
* Check UPRT (we avoid the check in real mode to deal with
* transitional states during kexec.
*/
if (!ppc64_use_proc_tbl(cpu)) {
qemu_log_mask(LOG_GUEST_ERROR,
"LPCR:UPRT not set in radix mode ! LPCR="
TARGET_FMT_lx "\n", env->spr[SPR_LPCR]);
}
/* Translate eaddr to raddr (where raddr is addr qemu needs for access) */
if (ppc_radix64_xlate(cpu, eaddr, rwx, relocation, &raddr,
&page_size, &prot, true)) {
target/ppc: Implement ISA V3.00 radix page fault handler ISA V3.00 introduced a new radix mmu model. Implement the page fault handler for this so we can run a tcg guest in radix mode and perform address translation correctly. In real mode (mmu turned off) addresses are masked to remove the top 4 bits and then are subject to partition scoped translation, since we only support pseries at this stage it is only necessary to perform the masking and then we're done. In virtual mode (mmu turned on) address translation if performed as follows: 1. Use the quadrant to determine the fully qualified address. The fully qualified address is defined as the combination of the effective address, the effective logical partition id (LPID) and the effective process id (PID). Based on the quadrant (EA63:62) we set the pid and lpid like so: quadrant 0: lpid = LPIDR, pid = PIDR quadrant 1: HV only (not allowed in pseries) quadrant 2: HV only (not allowed in pseries) quadrant 3: lpid = LPIDR, pid = 0 If we can't get the fully qualified address we raise a segment interrupt. 2. Find the guest radix tree We ask the virtual hypervisor for the partition table which was registered with H_REGISTER_PROC_TBL which points us to the process table in guest memory. We then index this table by pid to get the process table entry which points us to the appropriate radix tree to translate the address. If the process table isn't big enough to contain an entry for the current pid then we raise a storage interrupt. 3. Walk the radix tree Next we walk the radix tree where each level is a table of page directory entries indexed by some number of bits from the effective address, where the number of bits is determined by the table size. We continue to walk the tree (while entries are valid and the table is of minimum size) until we reach a table of page table entries, indicated by having the leaf bit set. The appropriate pte is then checked for sufficient access permissions, the reference and change bits are updated and the real address is calculated from the real page number bits of the pte and the low bits of the effective address. If we can't find an entry or can't access the entry bacause of permissions then we raise a storage interrupt. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> [dwg: Add missing parentheses to macro] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-05-02 09:37:17 +03:00
return 1;
}
tlb_set_page(cs, eaddr & TARGET_PAGE_MASK, raddr & TARGET_PAGE_MASK,
prot, mmu_idx, 1UL << page_size);
return 0;
target/ppc: Implement ISA V3.00 radix page fault handler ISA V3.00 introduced a new radix mmu model. Implement the page fault handler for this so we can run a tcg guest in radix mode and perform address translation correctly. In real mode (mmu turned off) addresses are masked to remove the top 4 bits and then are subject to partition scoped translation, since we only support pseries at this stage it is only necessary to perform the masking and then we're done. In virtual mode (mmu turned on) address translation if performed as follows: 1. Use the quadrant to determine the fully qualified address. The fully qualified address is defined as the combination of the effective address, the effective logical partition id (LPID) and the effective process id (PID). Based on the quadrant (EA63:62) we set the pid and lpid like so: quadrant 0: lpid = LPIDR, pid = PIDR quadrant 1: HV only (not allowed in pseries) quadrant 2: HV only (not allowed in pseries) quadrant 3: lpid = LPIDR, pid = 0 If we can't get the fully qualified address we raise a segment interrupt. 2. Find the guest radix tree We ask the virtual hypervisor for the partition table which was registered with H_REGISTER_PROC_TBL which points us to the process table in guest memory. We then index this table by pid to get the process table entry which points us to the appropriate radix tree to translate the address. If the process table isn't big enough to contain an entry for the current pid then we raise a storage interrupt. 3. Walk the radix tree Next we walk the radix tree where each level is a table of page directory entries indexed by some number of bits from the effective address, where the number of bits is determined by the table size. We continue to walk the tree (while entries are valid and the table is of minimum size) until we reach a table of page table entries, indicated by having the leaf bit set. The appropriate pte is then checked for sufficient access permissions, the reference and change bits are updated and the real address is calculated from the real page number bits of the pte and the low bits of the effective address. If we can't find an entry or can't access the entry bacause of permissions then we raise a storage interrupt. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> [dwg: Add missing parentheses to macro] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-05-02 09:37:17 +03:00
}
hwaddr ppc_radix64_get_phys_page_debug(PowerPCCPU *cpu, target_ulong eaddr)
{
CPUPPCState *env = &cpu->env;
int psize, prot;
hwaddr raddr;
/* Handle Real Mode */
if ((msr_dr == 0) && (msr_hv || cpu->vhyp)) {
/* In real mode top 4 effective addr bits (mostly) ignored */
return eaddr & 0x0FFFFFFFFFFFFFFFULL;
}
if (ppc_radix64_xlate(cpu, eaddr, 0, msr_dr, &raddr, &psize,
&prot, false)) {
return -1;
}
return raddr & TARGET_PAGE_MASK;
}