qemu/target/hppa/int_helper.c

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

290 lines
9.8 KiB
C
Raw Normal View History

/*
* HPPA interrupt helper routines
*
* Copyright (c) 2017 Richard Henderson
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*/
#include "qemu/osdep.h"
#include "qemu/main-loop.h"
#include "qemu/log.h"
#include "cpu.h"
#include "exec/helper-proto.h"
#include "hw/core/cpu.h"
hppa: Add support for an emulated TOC/NMI button. Almost all PA-RISC machines have either a button that is labeled with 'TOC' or a BMC/GSP function to trigger a TOC. TOC is a non-maskable interrupt that is sent to the processor. This can be used for diagnostic purposes like obtaining a stack trace/register dump or to enter KDB/KGDB in Linux. This patch adds support for such an emulated TOC button. It wires up the qemu monitor "nmi" command to trigger a TOC. For that it provides the hppa_nmi function which is assigned to the nmi_monitor_handler function pointer. When called it raises the EXCP_TOC hardware interrupt in the hppa_cpu_do_interrupt() function. The interrupt function then calls the architecturally defined TOC function in SeaBIOS-hppa firmware (at fixed address 0xf0000000). According to the PA-RISC PDC specification, the SeaBIOS firmware then writes the CPU registers into PIM (processor internal memmory) for later analysis. In order to write all registers it needs to know the contents of the CPU "shadow registers" and the IASQ- and IAOQ-back values. The IAOQ/IASQ values are provided by qemu in shadow registers when entering the SeaBIOS TOC function. This patch adds a new aritificial opcode "getshadowregs" (0xfffdead2) which restores the original values of the shadow registers. With this opcode SeaBIOS can store those registers as well into PIM before calling an OS-provided TOC handler. To trigger a TOC, switch to the qemu monitor with Ctrl-A C, and type in the command "nmi". After the TOC started the OS-debugger, exit the qemu monitor with Ctrl-A C. Signed-off-by: Helge Deller <deller@gmx.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2022-01-06 01:09:04 +03:00
#include "hw/hppa/hppa_hardware.h"
static void eval_interrupt(HPPACPU *cpu)
{
CPUState *cs = CPU(cpu);
if (cpu->env.cr[CR_EIRR] & cpu->env.cr[CR_EIEM]) {
cpu_interrupt(cs, CPU_INTERRUPT_HARD);
} else {
cpu_reset_interrupt(cs, CPU_INTERRUPT_HARD);
}
}
/* Each CPU has a word mapped into the GSC bus. Anything on the GSC bus
* can write to this word to raise an external interrupt on the target CPU.
* This includes the system controller (DINO) for regular devices, or
* another CPU for SMP interprocessor interrupts.
*/
static uint64_t io_eir_read(void *opaque, hwaddr addr, unsigned size)
{
HPPACPU *cpu = opaque;
/* ??? What does a read of this register over the GSC bus do? */
return cpu->env.cr[CR_EIRR];
}
static void io_eir_write(void *opaque, hwaddr addr,
uint64_t data, unsigned size)
{
HPPACPU *cpu = opaque;
CPUHPPAState *env = &cpu->env;
int widthm1 = 31;
int le_bit;
/* The default PSW.W controls the width of EIRR. */
if (hppa_is_pa20(env) && env->cr[CR_PSW_DEFAULT] & PDC_PSW_WIDE_BIT) {
widthm1 = 63;
}
le_bit = ~data & widthm1;
env->cr[CR_EIRR] |= 1ull << le_bit;
eval_interrupt(cpu);
}
const MemoryRegionOps hppa_io_eir_ops = {
.read = io_eir_read,
.write = io_eir_write,
.valid.min_access_size = 4,
.valid.max_access_size = 4,
.impl.min_access_size = 4,
.impl.max_access_size = 4,
};
void hppa_cpu_alarm_timer(void *opaque)
{
/* Raise interrupt 0. */
io_eir_write(opaque, 0, 0, 4);
}
void HELPER(write_eirr)(CPUHPPAState *env, target_ulong val)
{
env->cr[CR_EIRR] &= ~val;
qemu_mutex_lock_iothread();
eval_interrupt(env_archcpu(env));
qemu_mutex_unlock_iothread();
}
void HELPER(write_eiem)(CPUHPPAState *env, target_ulong val)
{
env->cr[CR_EIEM] = val;
qemu_mutex_lock_iothread();
eval_interrupt(env_archcpu(env));
qemu_mutex_unlock_iothread();
}
void hppa_cpu_do_interrupt(CPUState *cs)
{
HPPACPU *cpu = HPPA_CPU(cs);
CPUHPPAState *env = &cpu->env;
int i = cs->exception_index;
uint64_t old_psw;
/* As documented in pa2.0 -- interruption handling. */
/* step 1 */
env->cr[CR_IPSW] = old_psw = cpu_hppa_get_psw(env);
/* step 2 -- Note PSW_W is masked out again for pa1.x */
cpu_hppa_put_psw(env,
(env->cr[CR_PSW_DEFAULT] & PDC_PSW_WIDE_BIT ? PSW_W : 0) |
(i == EXCP_HPMC ? PSW_M : 0));
/* step 3 */
/*
* For pa1.x, IIASQ is simply a copy of IASQ.
* For pa2.0, IIASQ is the top bits of the virtual address,
* or zero if translation is disabled.
*/
if (!hppa_is_pa20(env)) {
env->cr[CR_IIASQ] = env->iasq_f >> 32;
env->cr_back[0] = env->iasq_b >> 32;
} else if (old_psw & PSW_C) {
env->cr[CR_IIASQ] =
hppa_form_gva_psw(old_psw, env->iasq_f, env->iaoq_f) >> 32;
env->cr_back[0] =
hppa_form_gva_psw(old_psw, env->iasq_b, env->iaoq_b) >> 32;
} else {
env->cr[CR_IIASQ] = 0;
env->cr_back[0] = 0;
}
env->cr[CR_IIAOQ] = env->iaoq_f;
env->cr_back[1] = env->iaoq_b;
if (old_psw & PSW_Q) {
/* step 5 */
/* ISR and IOR will be set elsewhere. */
switch (i) {
case EXCP_ILL:
case EXCP_BREAK:
case EXCP_PRIV_REG:
case EXCP_PRIV_OPR:
/* IIR set via translate.c. */
break;
case EXCP_OVERFLOW:
case EXCP_COND:
case EXCP_ASSIST:
case EXCP_DTLB_MISS:
case EXCP_NA_ITLB_MISS:
case EXCP_NA_DTLB_MISS:
case EXCP_DMAR:
case EXCP_DMPI:
case EXCP_UNALIGN:
case EXCP_DMP:
case EXCP_DMB:
case EXCP_TLB_DIRTY:
case EXCP_PAGE_REF:
case EXCP_ASSIST_EMU:
{
/* Avoid reading directly from the virtual address, lest we
raise another exception from some sort of TLB issue. */
/* ??? An alternate fool-proof method would be to store the
instruction data into the unwind info. That's probably
a bit too much in the way of extra storage required. */
vaddr vaddr = env->iaoq_f & -4;
hwaddr paddr = vaddr;
if (old_psw & PSW_C) {
int prot, t;
vaddr = hppa_form_gva_psw(old_psw, env->iasq_f, vaddr);
t = hppa_get_physical_address(env, vaddr, MMU_KERNEL_IDX,
0, &paddr, &prot, NULL);
if (t >= 0) {
/* We can't re-load the instruction. */
env->cr[CR_IIR] = 0;
break;
}
}
env->cr[CR_IIR] = ldl_phys(cs->as, paddr);
}
break;
default:
/* Other exceptions do not set IIR. */
break;
}
/* step 6 */
env->shadow[0] = env->gr[1];
env->shadow[1] = env->gr[8];
env->shadow[2] = env->gr[9];
env->shadow[3] = env->gr[16];
env->shadow[4] = env->gr[17];
env->shadow[5] = env->gr[24];
env->shadow[6] = env->gr[25];
}
/* step 7 */
hppa: Add support for an emulated TOC/NMI button. Almost all PA-RISC machines have either a button that is labeled with 'TOC' or a BMC/GSP function to trigger a TOC. TOC is a non-maskable interrupt that is sent to the processor. This can be used for diagnostic purposes like obtaining a stack trace/register dump or to enter KDB/KGDB in Linux. This patch adds support for such an emulated TOC button. It wires up the qemu monitor "nmi" command to trigger a TOC. For that it provides the hppa_nmi function which is assigned to the nmi_monitor_handler function pointer. When called it raises the EXCP_TOC hardware interrupt in the hppa_cpu_do_interrupt() function. The interrupt function then calls the architecturally defined TOC function in SeaBIOS-hppa firmware (at fixed address 0xf0000000). According to the PA-RISC PDC specification, the SeaBIOS firmware then writes the CPU registers into PIM (processor internal memmory) for later analysis. In order to write all registers it needs to know the contents of the CPU "shadow registers" and the IASQ- and IAOQ-back values. The IAOQ/IASQ values are provided by qemu in shadow registers when entering the SeaBIOS TOC function. This patch adds a new aritificial opcode "getshadowregs" (0xfffdead2) which restores the original values of the shadow registers. With this opcode SeaBIOS can store those registers as well into PIM before calling an OS-provided TOC handler. To trigger a TOC, switch to the qemu monitor with Ctrl-A C, and type in the command "nmi". After the TOC started the OS-debugger, exit the qemu monitor with Ctrl-A C. Signed-off-by: Helge Deller <deller@gmx.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2022-01-06 01:09:04 +03:00
if (i == EXCP_TOC) {
env->iaoq_f = hppa_form_gva(env, 0, FIRMWARE_START);
hppa: Add support for an emulated TOC/NMI button. Almost all PA-RISC machines have either a button that is labeled with 'TOC' or a BMC/GSP function to trigger a TOC. TOC is a non-maskable interrupt that is sent to the processor. This can be used for diagnostic purposes like obtaining a stack trace/register dump or to enter KDB/KGDB in Linux. This patch adds support for such an emulated TOC button. It wires up the qemu monitor "nmi" command to trigger a TOC. For that it provides the hppa_nmi function which is assigned to the nmi_monitor_handler function pointer. When called it raises the EXCP_TOC hardware interrupt in the hppa_cpu_do_interrupt() function. The interrupt function then calls the architecturally defined TOC function in SeaBIOS-hppa firmware (at fixed address 0xf0000000). According to the PA-RISC PDC specification, the SeaBIOS firmware then writes the CPU registers into PIM (processor internal memmory) for later analysis. In order to write all registers it needs to know the contents of the CPU "shadow registers" and the IASQ- and IAOQ-back values. The IAOQ/IASQ values are provided by qemu in shadow registers when entering the SeaBIOS TOC function. This patch adds a new aritificial opcode "getshadowregs" (0xfffdead2) which restores the original values of the shadow registers. With this opcode SeaBIOS can store those registers as well into PIM before calling an OS-provided TOC handler. To trigger a TOC, switch to the qemu monitor with Ctrl-A C, and type in the command "nmi". After the TOC started the OS-debugger, exit the qemu monitor with Ctrl-A C. Signed-off-by: Helge Deller <deller@gmx.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2022-01-06 01:09:04 +03:00
/* help SeaBIOS and provide iaoq_b and iasq_back in shadow regs */
env->gr[24] = env->cr_back[0];
env->gr[25] = env->cr_back[1];
} else {
env->iaoq_f = hppa_form_gva(env, 0, env->cr[CR_IVA] + 32 * i);
hppa: Add support for an emulated TOC/NMI button. Almost all PA-RISC machines have either a button that is labeled with 'TOC' or a BMC/GSP function to trigger a TOC. TOC is a non-maskable interrupt that is sent to the processor. This can be used for diagnostic purposes like obtaining a stack trace/register dump or to enter KDB/KGDB in Linux. This patch adds support for such an emulated TOC button. It wires up the qemu monitor "nmi" command to trigger a TOC. For that it provides the hppa_nmi function which is assigned to the nmi_monitor_handler function pointer. When called it raises the EXCP_TOC hardware interrupt in the hppa_cpu_do_interrupt() function. The interrupt function then calls the architecturally defined TOC function in SeaBIOS-hppa firmware (at fixed address 0xf0000000). According to the PA-RISC PDC specification, the SeaBIOS firmware then writes the CPU registers into PIM (processor internal memmory) for later analysis. In order to write all registers it needs to know the contents of the CPU "shadow registers" and the IASQ- and IAOQ-back values. The IAOQ/IASQ values are provided by qemu in shadow registers when entering the SeaBIOS TOC function. This patch adds a new aritificial opcode "getshadowregs" (0xfffdead2) which restores the original values of the shadow registers. With this opcode SeaBIOS can store those registers as well into PIM before calling an OS-provided TOC handler. To trigger a TOC, switch to the qemu monitor with Ctrl-A C, and type in the command "nmi". After the TOC started the OS-debugger, exit the qemu monitor with Ctrl-A C. Signed-off-by: Helge Deller <deller@gmx.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2022-01-06 01:09:04 +03:00
}
env->iaoq_b = hppa_form_gva(env, 0, env->iaoq_f + 4);
env->iasq_f = 0;
env->iasq_b = 0;
if (qemu_loglevel_mask(CPU_LOG_INT)) {
static const char * const names[] = {
[EXCP_HPMC] = "high priority machine check",
[EXCP_POWER_FAIL] = "power fail interrupt",
[EXCP_RC] = "recovery counter trap",
[EXCP_EXT_INTERRUPT] = "external interrupt",
[EXCP_LPMC] = "low priority machine check",
[EXCP_ITLB_MISS] = "instruction tlb miss fault",
[EXCP_IMP] = "instruction memory protection trap",
[EXCP_ILL] = "illegal instruction trap",
[EXCP_BREAK] = "break instruction trap",
[EXCP_PRIV_OPR] = "privileged operation trap",
[EXCP_PRIV_REG] = "privileged register trap",
[EXCP_OVERFLOW] = "overflow trap",
[EXCP_COND] = "conditional trap",
[EXCP_ASSIST] = "assist exception trap",
[EXCP_DTLB_MISS] = "data tlb miss fault",
[EXCP_NA_ITLB_MISS] = "non-access instruction tlb miss",
[EXCP_NA_DTLB_MISS] = "non-access data tlb miss",
[EXCP_DMP] = "data memory protection trap",
[EXCP_DMB] = "data memory break trap",
[EXCP_TLB_DIRTY] = "tlb dirty bit trap",
[EXCP_PAGE_REF] = "page reference trap",
[EXCP_ASSIST_EMU] = "assist emulation trap",
[EXCP_HPT] = "high-privilege transfer trap",
[EXCP_LPT] = "low-privilege transfer trap",
[EXCP_TB] = "taken branch trap",
[EXCP_DMAR] = "data memory access rights trap",
[EXCP_DMPI] = "data memory protection id trap",
[EXCP_UNALIGN] = "unaligned data reference trap",
[EXCP_PER_INTERRUPT] = "performance monitor interrupt",
[EXCP_SYSCALL] = "syscall",
[EXCP_SYSCALL_LWS] = "syscall-lws",
hppa: Add support for an emulated TOC/NMI button. Almost all PA-RISC machines have either a button that is labeled with 'TOC' or a BMC/GSP function to trigger a TOC. TOC is a non-maskable interrupt that is sent to the processor. This can be used for diagnostic purposes like obtaining a stack trace/register dump or to enter KDB/KGDB in Linux. This patch adds support for such an emulated TOC button. It wires up the qemu monitor "nmi" command to trigger a TOC. For that it provides the hppa_nmi function which is assigned to the nmi_monitor_handler function pointer. When called it raises the EXCP_TOC hardware interrupt in the hppa_cpu_do_interrupt() function. The interrupt function then calls the architecturally defined TOC function in SeaBIOS-hppa firmware (at fixed address 0xf0000000). According to the PA-RISC PDC specification, the SeaBIOS firmware then writes the CPU registers into PIM (processor internal memmory) for later analysis. In order to write all registers it needs to know the contents of the CPU "shadow registers" and the IASQ- and IAOQ-back values. The IAOQ/IASQ values are provided by qemu in shadow registers when entering the SeaBIOS TOC function. This patch adds a new aritificial opcode "getshadowregs" (0xfffdead2) which restores the original values of the shadow registers. With this opcode SeaBIOS can store those registers as well into PIM before calling an OS-provided TOC handler. To trigger a TOC, switch to the qemu monitor with Ctrl-A C, and type in the command "nmi". After the TOC started the OS-debugger, exit the qemu monitor with Ctrl-A C. Signed-off-by: Helge Deller <deller@gmx.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2022-01-06 01:09:04 +03:00
[EXCP_TOC] = "TOC (transfer of control)",
};
static int count;
const char *name = NULL;
char unknown[16];
if (i >= 0 && i < ARRAY_SIZE(names)) {
name = names[i];
}
if (!name) {
snprintf(unknown, sizeof(unknown), "unknown %d", i);
name = unknown;
}
qemu_log("INT %6d: %s @ " TARGET_FMT_lx ":" TARGET_FMT_lx
" for " TARGET_FMT_lx ":" TARGET_FMT_lx "\n",
++count, name, env->cr[CR_IIASQ], env->cr[CR_IIAOQ],
env->cr[CR_ISR], env->cr[CR_IOR]);
}
cs->exception_index = -1;
}
bool hppa_cpu_exec_interrupt(CPUState *cs, int interrupt_request)
{
HPPACPU *cpu = HPPA_CPU(cs);
CPUHPPAState *env = &cpu->env;
hppa: Add support for an emulated TOC/NMI button. Almost all PA-RISC machines have either a button that is labeled with 'TOC' or a BMC/GSP function to trigger a TOC. TOC is a non-maskable interrupt that is sent to the processor. This can be used for diagnostic purposes like obtaining a stack trace/register dump or to enter KDB/KGDB in Linux. This patch adds support for such an emulated TOC button. It wires up the qemu monitor "nmi" command to trigger a TOC. For that it provides the hppa_nmi function which is assigned to the nmi_monitor_handler function pointer. When called it raises the EXCP_TOC hardware interrupt in the hppa_cpu_do_interrupt() function. The interrupt function then calls the architecturally defined TOC function in SeaBIOS-hppa firmware (at fixed address 0xf0000000). According to the PA-RISC PDC specification, the SeaBIOS firmware then writes the CPU registers into PIM (processor internal memmory) for later analysis. In order to write all registers it needs to know the contents of the CPU "shadow registers" and the IASQ- and IAOQ-back values. The IAOQ/IASQ values are provided by qemu in shadow registers when entering the SeaBIOS TOC function. This patch adds a new aritificial opcode "getshadowregs" (0xfffdead2) which restores the original values of the shadow registers. With this opcode SeaBIOS can store those registers as well into PIM before calling an OS-provided TOC handler. To trigger a TOC, switch to the qemu monitor with Ctrl-A C, and type in the command "nmi". After the TOC started the OS-debugger, exit the qemu monitor with Ctrl-A C. Signed-off-by: Helge Deller <deller@gmx.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2022-01-06 01:09:04 +03:00
if (interrupt_request & CPU_INTERRUPT_NMI) {
/* Raise TOC (NMI) interrupt */
cpu_reset_interrupt(cs, CPU_INTERRUPT_NMI);
cs->exception_index = EXCP_TOC;
hppa_cpu_do_interrupt(cs);
return true;
}
/* If interrupts are requested and enabled, raise them. */
if ((env->psw & PSW_I) && (interrupt_request & CPU_INTERRUPT_HARD)) {
cs->exception_index = EXCP_EXT_INTERRUPT;
hppa_cpu_do_interrupt(cs);
return true;
}
return false;
}