mirrors/qemu
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
abb1565d3d
qemu/hw/usb/Kconfig

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

146 lines
1.9 KiB
Plaintext
Raw Normal View History

kconfig: introduce kconfig files The Kconfig files were generated mostly with this script: for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' ` shift if test $# = 1; then cat >> $(dirname $1)/Kconfig << EOF config ${i#CONFIG_} bool EOF git add $(dirname $1)/Kconfig else echo $i $* fi done sed -i '$d' hw/*/Kconfig for i in hw/*; do if test -d $i && ! test -f $i/Kconfig; then touch $i/Kconfig git add $i/Kconfig fi done Whenever a symbol is referenced from multiple subdirectories, the script prints the list of directories that reference the symbol. These symbols have to be added manually to the Kconfig files. Kconfig.host and hw/Kconfig were created manually. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-27-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-23 09:56:00 +03:00
config USB
bool
config USB_UHCI
bool
build: convert pci.mak to Kconfig Instead of including the same list of devices for each target, set CONFIG_PCI to true, and make the devices default to present whenever PCI is available. However, s390x does not want all the PCI devices, so there is a separate symbol to enable them. Done mostly with the following script: while read i; do i=${i%=y}; i=${i#CONFIG_} sed -i -e'/^config '$i'$/!b' -en \ -e'a\' -e' default y if PCI_DEVICES\' -e' depends on PCI' \ `grep -lw $i hw/*/Kconfig` done < default-configs/pci.mak followed by replacing a few "depends on" clauses with "select" whenever the symbol is not really related to PCI. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-31-yang.zhong@intel.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-23 09:56:04 +03:00
default y if PCI_DEVICES
depends on PCI
build: convert usb.mak to Kconfig Instead of including the same list of devices for each target, let the host controllers select CONFIG_USB and make the devices default to present whenever USB is available. Done with the following script: while read i; do i=${i%=y}; i=${i#CONFIG_} sed -i -e'/^config '$i'$/!b' -en \ -e'a\' -e' default y\' -e' depends on USB' \ `grep -lw $i hw/*/Kconfig` done < default-configs/usb.mak followed by adding "select USB" on the host controllers. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-33-yang.zhong@intel.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-23 09:56:06 +03:00
select USB
kconfig: introduce kconfig files The Kconfig files were generated mostly with this script: for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' ` shift if test $# = 1; then cat >> $(dirname $1)/Kconfig << EOF config ${i#CONFIG_} bool EOF git add $(dirname $1)/Kconfig else echo $i $* fi done sed -i '$d' hw/*/Kconfig for i in hw/*; do if test -d $i && ! test -f $i/Kconfig; then touch $i/Kconfig git add $i/Kconfig fi done Whenever a symbol is referenced from multiple subdirectories, the script prints the list of directories that reference the symbol. These symbols have to be added manually to the Kconfig files. Kconfig.host and hw/Kconfig were created manually. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-27-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-23 09:56:00 +03:00
config USB_OHCI
hw/usb/hcd-ohci: Move PCI-related code into a separate file Some machines (like the pxa2xx-based ARM machines) only have a sysbus OHCI controller, but no PCI. With the new Kconfig-style build system, it will soon be possible to create QEMU binaries that only contain such PCI-less machines. However, the two OHCI controllers, for sysbus and for PCI, are currently both located in one file, so the PCI code is still required for linking here. Move the OHCI-PCI device code into a separate file, so that it is possible to use the sysbus OHCI device also without the PCI dependency. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190419075625.24251-3-thuth@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-04-19 10:56:25 +03:00
bool
select USB
hw/usb: extract sysbus-ohci to a separate file Split the sysbus version to a separate file so that it is not included in PCI-only machines, and adjust Kconfig for machines that do need sysbus-ohci. The copyrights are based on the time and employer of balrog and Paul Brook's contributions. While adjusting the SM501 dependency, move it to the right place instead of keeping it in the R4D machine. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <20240223124406.234509-10-pbonzini@redhat.com> [PMD: Rename some functions using 'ohci_sysbus_' prefix] Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2024-02-23 15:44:05 +03:00
config USB_OHCI_SYSBUS
bool
select USB_OHCI
hw/usb/hcd-ohci: Move PCI-related code into a separate file Some machines (like the pxa2xx-based ARM machines) only have a sysbus OHCI controller, but no PCI. With the new Kconfig-style build system, it will soon be possible to create QEMU binaries that only contain such PCI-less machines. However, the two OHCI controllers, for sysbus and for PCI, are currently both located in one file, so the PCI code is still required for linking here. Move the OHCI-PCI device code into a separate file, so that it is possible to use the sysbus OHCI device also without the PCI dependency. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190419075625.24251-3-thuth@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-04-19 10:56:25 +03:00
config USB_OHCI_PCI
kconfig: introduce kconfig files The Kconfig files were generated mostly with this script: for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' ` shift if test $# = 1; then cat >> $(dirname $1)/Kconfig << EOF config ${i#CONFIG_} bool EOF git add $(dirname $1)/Kconfig else echo $i $* fi done sed -i '$d' hw/*/Kconfig for i in hw/*; do if test -d $i && ! test -f $i/Kconfig; then touch $i/Kconfig git add $i/Kconfig fi done Whenever a symbol is referenced from multiple subdirectories, the script prints the list of directories that reference the symbol. These symbols have to be added manually to the Kconfig files. Kconfig.host and hw/Kconfig were created manually. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-27-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-23 09:56:00 +03:00
bool
build: convert pci.mak to Kconfig Instead of including the same list of devices for each target, set CONFIG_PCI to true, and make the devices default to present whenever PCI is available. However, s390x does not want all the PCI devices, so there is a separate symbol to enable them. Done mostly with the following script: while read i; do i=${i%=y}; i=${i#CONFIG_} sed -i -e'/^config '$i'$/!b' -en \ -e'a\' -e' default y if PCI_DEVICES\' -e' depends on PCI' \ `grep -lw $i hw/*/Kconfig` done < default-configs/pci.mak followed by replacing a few "depends on" clauses with "select" whenever the symbol is not really related to PCI. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-31-yang.zhong@intel.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-23 09:56:04 +03:00
default y if PCI_DEVICES
depends on PCI
hw/usb/hcd-ohci: Move PCI-related code into a separate file Some machines (like the pxa2xx-based ARM machines) only have a sysbus OHCI controller, but no PCI. With the new Kconfig-style build system, it will soon be possible to create QEMU binaries that only contain such PCI-less machines. However, the two OHCI controllers, for sysbus and for PCI, are currently both located in one file, so the PCI code is still required for linking here. Move the OHCI-PCI device code into a separate file, so that it is possible to use the sysbus OHCI device also without the PCI dependency. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190419075625.24251-3-thuth@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-04-19 10:56:25 +03:00
select USB_OHCI
kconfig: introduce kconfig files The Kconfig files were generated mostly with this script: for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' ` shift if test $# = 1; then cat >> $(dirname $1)/Kconfig << EOF config ${i#CONFIG_} bool EOF git add $(dirname $1)/Kconfig else echo $i $* fi done sed -i '$d' hw/*/Kconfig for i in hw/*; do if test -d $i && ! test -f $i/Kconfig; then touch $i/Kconfig git add $i/Kconfig fi done Whenever a symbol is referenced from multiple subdirectories, the script prints the list of directories that reference the symbol. These symbols have to be added manually to the Kconfig files. Kconfig.host and hw/Kconfig were created manually. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-27-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-23 09:56:00 +03:00
config USB_EHCI
bool
build: convert usb.mak to Kconfig Instead of including the same list of devices for each target, let the host controllers select CONFIG_USB and make the devices default to present whenever USB is available. Done with the following script: while read i; do i=${i%=y}; i=${i#CONFIG_} sed -i -e'/^config '$i'$/!b' -en \ -e'a\' -e' default y\' -e' depends on USB' \ `grep -lw $i hw/*/Kconfig` done < default-configs/usb.mak followed by adding "select USB" on the host controllers. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-33-yang.zhong@intel.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-23 09:56:06 +03:00
select USB
kconfig: introduce kconfig files The Kconfig files were generated mostly with this script: for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' ` shift if test $# = 1; then cat >> $(dirname $1)/Kconfig << EOF config ${i#CONFIG_} bool EOF git add $(dirname $1)/Kconfig else echo $i $* fi done sed -i '$d' hw/*/Kconfig for i in hw/*; do if test -d $i && ! test -f $i/Kconfig; then touch $i/Kconfig git add $i/Kconfig fi done Whenever a symbol is referenced from multiple subdirectories, the script prints the list of directories that reference the symbol. These symbols have to be added manually to the Kconfig files. Kconfig.host and hw/Kconfig were created manually. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-27-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-23 09:56:00 +03:00
hw/usb/Kconfig: Add CONFIG_USB_EHCI_PCI The USB_EHCI entry currently include PCI code. Since the EHCI implementation is already split in sysbus/PCI, add a new USB_EHCI_PCI. There are no logical changes, but the Kconfig dependencies tree is cleaner. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-15 12:55:44 +03:00
config USB_EHCI_PCI
bool
default y if PCI_DEVICES
select USB_EHCI
kconfig: introduce kconfig files The Kconfig files were generated mostly with this script: for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' ` shift if test $# = 1; then cat >> $(dirname $1)/Kconfig << EOF config ${i#CONFIG_} bool EOF git add $(dirname $1)/Kconfig else echo $i $* fi done sed -i '$d' hw/*/Kconfig for i in hw/*; do if test -d $i && ! test -f $i/Kconfig; then touch $i/Kconfig git add $i/Kconfig fi done Whenever a symbol is referenced from multiple subdirectories, the script prints the list of directories that reference the symbol. These symbols have to be added manually to the Kconfig files. Kconfig.host and hw/Kconfig were created manually. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-27-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-23 09:56:00 +03:00
config USB_EHCI_SYSBUS
bool
hw/usb/Kconfig: Add CONFIG_USB_EHCI_PCI The USB_EHCI entry currently include PCI code. Since the EHCI implementation is already split in sysbus/PCI, add a new USB_EHCI_PCI. There are no logical changes, but the Kconfig dependencies tree is cleaner. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-15 12:55:44 +03:00
select USB_EHCI
kconfig: introduce kconfig files The Kconfig files were generated mostly with this script: for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' ` shift if test $# = 1; then cat >> $(dirname $1)/Kconfig << EOF config ${i#CONFIG_} bool EOF git add $(dirname $1)/Kconfig else echo $i $* fi done sed -i '$d' hw/*/Kconfig for i in hw/*; do if test -d $i && ! test -f $i/Kconfig; then touch $i/Kconfig git add $i/Kconfig fi done Whenever a symbol is referenced from multiple subdirectories, the script prints the list of directories that reference the symbol. These symbols have to be added manually to the Kconfig files. Kconfig.host and hw/Kconfig were created manually. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-27-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-23 09:56:00 +03:00
config USB_XHCI
bool
build: convert usb.mak to Kconfig Instead of including the same list of devices for each target, let the host controllers select CONFIG_USB and make the devices default to present whenever USB is available. Done with the following script: while read i; do i=${i%=y}; i=${i#CONFIG_} sed -i -e'/^config '$i'$/!b' -en \ -e'a\' -e' default y\' -e' depends on USB' \ `grep -lw $i hw/*/Kconfig` done < default-configs/usb.mak followed by adding "select USB" on the host controllers. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-33-yang.zhong@intel.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-23 09:56:06 +03:00
select USB
kconfig: introduce kconfig files The Kconfig files were generated mostly with this script: for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' ` shift if test $# = 1; then cat >> $(dirname $1)/Kconfig << EOF config ${i#CONFIG_} bool EOF git add $(dirname $1)/Kconfig else echo $i $* fi done sed -i '$d' hw/*/Kconfig for i in hw/*; do if test -d $i && ! test -f $i/Kconfig; then touch $i/Kconfig git add $i/Kconfig fi done Whenever a symbol is referenced from multiple subdirectories, the script prints the list of directories that reference the symbol. These symbols have to be added manually to the Kconfig files. Kconfig.host and hw/Kconfig were created manually. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-27-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-23 09:56:00 +03:00
usb/hcd-xhci: Move qemu-xhci device to hcd-xhci-pci.c Move pci specific devices to new file. This set the environment to move all pci specific hooks in hcd-xhci.c to hcd-xhci-pci.c. Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com> Message-id: 1600957256-6494-3-git-send-email-sai.pavan.boddu@xilinx.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-09-24 17:20:51 +03:00
config USB_XHCI_PCI
bool
kconfig: Add PCIe devices to s390x machines It is useful to extend the number of available PCIe devices to KVM guests for passthrough scenarios and also to expose these models to a different (big endian) architecture. Introduce a new config PCIE_DEVICES to select models, Intel Ethernet adapters and one USB controller. These devices all support MSI-X which is a requirement on s390x as legacy INTx are not supported. Cc: Matthew Rosato <mjrosato@linux.ibm.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Thomas Huth <thuth@redhat.com> Signed-off-by: Cédric Le Goater <clg@redhat.com> Message-ID: <20230712080146.839113-1-clg@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-07-12 11:01:46 +03:00
default y if PCI_DEVICES || PCIE_DEVICES
usb/hcd-xhci: Move qemu-xhci device to hcd-xhci-pci.c Move pci specific devices to new file. This set the environment to move all pci specific hooks in hcd-xhci.c to hcd-xhci-pci.c. Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com> Message-id: 1600957256-6494-3-git-send-email-sai.pavan.boddu@xilinx.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-09-24 17:20:51 +03:00
depends on PCI
select USB_XHCI
kconfig: introduce kconfig files The Kconfig files were generated mostly with this script: for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' ` shift if test $# = 1; then cat >> $(dirname $1)/Kconfig << EOF config ${i#CONFIG_} bool EOF git add $(dirname $1)/Kconfig else echo $i $* fi done sed -i '$d' hw/*/Kconfig for i in hw/*; do if test -d $i && ! test -f $i/Kconfig; then touch $i/Kconfig git add $i/Kconfig fi done Whenever a symbol is referenced from multiple subdirectories, the script prints the list of directories that reference the symbol. These symbols have to be added manually to the Kconfig files. Kconfig.host and hw/Kconfig were created manually. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-27-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-23 09:56:00 +03:00
config USB_XHCI_NEC
bool
build: convert pci.mak to Kconfig Instead of including the same list of devices for each target, set CONFIG_PCI to true, and make the devices default to present whenever PCI is available. However, s390x does not want all the PCI devices, so there is a separate symbol to enable them. Done mostly with the following script: while read i; do i=${i%=y}; i=${i#CONFIG_} sed -i -e'/^config '$i'$/!b' -en \ -e'a\' -e' default y if PCI_DEVICES\' -e' depends on PCI' \ `grep -lw $i hw/*/Kconfig` done < default-configs/pci.mak followed by replacing a few "depends on" clauses with "select" whenever the symbol is not really related to PCI. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-31-yang.zhong@intel.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-23 09:56:04 +03:00
default y if PCI_DEVICES
hw/usb/Kconfig: Fix USB_XHCI_NEC (depends on USB_XHCI_PCI) Since commit 755fba11fbc and 8ddab8dd3d8 we can not build USB_XHCI_NEC without USB_XHCI_PCI. Correct the Kconfig dependency. Fixes: 755fba11fbc ("usb/hcd-xhci: Move qemu-xhci device to hcd-xhci-pci.c") Reviewed-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20201109135300.2592982-2-philmd@redhat.com [ kraxel: restore "default y if PCI_DEVICES" because "qemu-system-ppc64 -M pseries,usb=on" needs USB_XHCI_NEC=y ] Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-11-09 16:52:57 +03:00
select USB_XHCI_PCI
kconfig: introduce kconfig files The Kconfig files were generated mostly with this script: for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' ` shift if test $# = 1; then cat >> $(dirname $1)/Kconfig << EOF config ${i#CONFIG_} bool EOF git add $(dirname $1)/Kconfig else echo $i $* fi done sed -i '$d' hw/*/Kconfig for i in hw/*; do if test -d $i && ! test -f $i/Kconfig; then touch $i/Kconfig git add $i/Kconfig fi done Whenever a symbol is referenced from multiple subdirectories, the script prints the list of directories that reference the symbol. These symbols have to be added manually to the Kconfig files. Kconfig.host and hw/Kconfig were created manually. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-27-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-23 09:56:00 +03:00
usb: hcd-xhci-sysbus: Attach xhci to sysbus device Use XHCI as sysbus device, add memory region property to get the address space instance for dma read/write. Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com> Message-id: 1600957256-6494-5-git-send-email-sai.pavan.boddu@xilinx.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-09-24 17:20:53 +03:00
config USB_XHCI_SYSBUS
bool
usb/xhci: fixup xhci kconfig deps USB_XHCI does not depend on PCI any more. USB_XHCI_SYSBUS must select USB_XHCI not USB. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com> Message-id: 20201020074844.5304-5-kraxel@redhat.com
2020-10-20 10:48:38 +03:00
select USB_XHCI
usb: hcd-xhci-sysbus: Attach xhci to sysbus device Use XHCI as sysbus device, add memory region property to get the address space instance for dma read/write. Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com> Message-id: 1600957256-6494-5-git-send-email-sai.pavan.boddu@xilinx.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-09-24 17:20:53 +03:00
dwc-hsotg (dwc2) USB host controller emulation Add the dwc-hsotg (dwc2) USB host controller emulation code. Based on hw/usb/hcd-ehci.c and hw/usb/hcd-ohci.c. Note that to use this with the dwc-otg driver in the Raspbian kernel, you must pass the option "dwc_otg.fiq_fsm_enable=0" on the kernel command line. Emulation of slave mode and of descriptor-DMA mode has not been implemented yet. These modes are seldom used. I have used some on-line sources of information while developing this emulation, including: http://www.capital-micro.com/PDF/CME-M7_Family_User_Guide_EN.pdf which has a pretty complete description of the controller starting on page 370. https://sourceforge.net/p/wive-ng/wive-ng-mt/ci/master/tree/docs/DataSheets/RT3050_5x_V2.0_081408_0902.pdf which has a description of the controller registers starting on page 130. Thanks to Felippe Mathieu-Daude for providing a cleaner method of implementing the memory regions for the controller registers. Signed-off-by: Paul Zimmerman <pauldzim@gmail.com> Message-id: 20200520235349.21215-5-pauldzim@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-21 02:53:46 +03:00
config USB_DWC2
bool
select USB
usb: add config options for the hub and hid devices Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <20240530112718.1752905-3-kraxel@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2024-05-30 14:27:15 +03:00
config USB_HUB
bool
default y
depends on USB
config USB_HID
bool
default y
depends on USB
kconfig: introduce kconfig files The Kconfig files were generated mostly with this script: for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' ` shift if test $# = 1; then cat >> $(dirname $1)/Kconfig << EOF config ${i#CONFIG_} bool EOF git add $(dirname $1)/Kconfig else echo $i $* fi done sed -i '$d' hw/*/Kconfig for i in hw/*; do if test -d $i && ! test -f $i/Kconfig; then touch $i/Kconfig git add $i/Kconfig fi done Whenever a symbol is referenced from multiple subdirectories, the script prints the list of directories that reference the symbol. These symbols have to be added manually to the Kconfig files. Kconfig.host and hw/Kconfig were created manually. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-27-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-23 09:56:00 +03:00
config USB_TABLET_WACOM
bool
build: convert usb.mak to Kconfig Instead of including the same list of devices for each target, let the host controllers select CONFIG_USB and make the devices default to present whenever USB is available. Done with the following script: while read i; do i=${i%=y}; i=${i#CONFIG_} sed -i -e'/^config '$i'$/!b' -en \ -e'a\' -e' default y\' -e' depends on USB' \ `grep -lw $i hw/*/Kconfig` done < default-configs/usb.mak followed by adding "select USB" on the host controllers. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-33-yang.zhong@intel.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-23 09:56:06 +03:00
default y
depends on USB
kconfig: introduce kconfig files The Kconfig files were generated mostly with this script: for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' ` shift if test $# = 1; then cat >> $(dirname $1)/Kconfig << EOF config ${i#CONFIG_} bool EOF git add $(dirname $1)/Kconfig else echo $i $* fi done sed -i '$d' hw/*/Kconfig for i in hw/*; do if test -d $i && ! test -f $i/Kconfig; then touch $i/Kconfig git add $i/Kconfig fi done Whenever a symbol is referenced from multiple subdirectories, the script prints the list of directories that reference the symbol. These symbols have to be added manually to the Kconfig files. Kconfig.host and hw/Kconfig were created manually. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-27-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-23 09:56:00 +03:00
usb/storage: add kconfig symbols Add new kconfig symbols so usb-storage and usb-bot can be enabled or disabled individually at build time. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-Id: <20210312090425.772900-5-kraxel@redhat.com>
2021-03-12 12:04:25 +03:00
config USB_STORAGE_CORE
bool
depends on USB
select SCSI
config USB_STORAGE_CLASSIC
bool
default y
depends on USB
select USB_STORAGE_CORE
kconfig: introduce kconfig files The Kconfig files were generated mostly with this script: for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' ` shift if test $# = 1; then cat >> $(dirname $1)/Kconfig << EOF config ${i#CONFIG_} bool EOF git add $(dirname $1)/Kconfig else echo $i $* fi done sed -i '$d' hw/*/Kconfig for i in hw/*; do if test -d $i && ! test -f $i/Kconfig; then touch $i/Kconfig git add $i/Kconfig fi done Whenever a symbol is referenced from multiple subdirectories, the script prints the list of directories that reference the symbol. These symbols have to be added manually to the Kconfig files. Kconfig.host and hw/Kconfig were created manually. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-27-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-23 09:56:00 +03:00
config USB_STORAGE_BOT
bool
build: convert usb.mak to Kconfig Instead of including the same list of devices for each target, let the host controllers select CONFIG_USB and make the devices default to present whenever USB is available. Done with the following script: while read i; do i=${i%=y}; i=${i#CONFIG_} sed -i -e'/^config '$i'$/!b' -en \ -e'a\' -e' default y\' -e' depends on USB' \ `grep -lw $i hw/*/Kconfig` done < default-configs/usb.mak followed by adding "select USB" on the host controllers. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-33-yang.zhong@intel.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-23 09:56:06 +03:00
default y
depends on USB
usb/storage: add kconfig symbols Add new kconfig symbols so usb-storage and usb-bot can be enabled or disabled individually at build time. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-Id: <20210312090425.772900-5-kraxel@redhat.com>
2021-03-12 12:04:25 +03:00
select USB_STORAGE_CORE
kconfig: introduce kconfig files The Kconfig files were generated mostly with this script: for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' ` shift if test $# = 1; then cat >> $(dirname $1)/Kconfig << EOF config ${i#CONFIG_} bool EOF git add $(dirname $1)/Kconfig else echo $i $* fi done sed -i '$d' hw/*/Kconfig for i in hw/*; do if test -d $i && ! test -f $i/Kconfig; then touch $i/Kconfig git add $i/Kconfig fi done Whenever a symbol is referenced from multiple subdirectories, the script prints the list of directories that reference the symbol. These symbols have to be added manually to the Kconfig files. Kconfig.host and hw/Kconfig were created manually. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-27-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-23 09:56:00 +03:00
config USB_STORAGE_UAS
bool
build: convert usb.mak to Kconfig Instead of including the same list of devices for each target, let the host controllers select CONFIG_USB and make the devices default to present whenever USB is available. Done with the following script: while read i; do i=${i%=y}; i=${i#CONFIG_} sed -i -e'/^config '$i'$/!b' -en \ -e'a\' -e' default y\' -e' depends on USB' \ `grep -lw $i hw/*/Kconfig` done < default-configs/usb.mak followed by adding "select USB" on the host controllers. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-33-yang.zhong@intel.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-23 09:56:06 +03:00
default y
depends on USB
scsi: express dependencies with Kconfig This automatically removes the SCSI subsystem from the binary altogether if no controllers are selected. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-34-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-23 09:56:07 +03:00
select SCSI
kconfig: introduce kconfig files The Kconfig files were generated mostly with this script: for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' ` shift if test $# = 1; then cat >> $(dirname $1)/Kconfig << EOF config ${i#CONFIG_} bool EOF git add $(dirname $1)/Kconfig else echo $i $* fi done sed -i '$d' hw/*/Kconfig for i in hw/*; do if test -d $i && ! test -f $i/Kconfig; then touch $i/Kconfig git add $i/Kconfig fi done Whenever a symbol is referenced from multiple subdirectories, the script prints the list of directories that reference the symbol. These symbols have to be added manually to the Kconfig files. Kconfig.host and hw/Kconfig were created manually. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-27-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-23 09:56:00 +03:00
config USB_AUDIO
bool
build: convert usb.mak to Kconfig Instead of including the same list of devices for each target, let the host controllers select CONFIG_USB and make the devices default to present whenever USB is available. Done with the following script: while read i; do i=${i%=y}; i=${i#CONFIG_} sed -i -e'/^config '$i'$/!b' -en \ -e'a\' -e' default y\' -e' depends on USB' \ `grep -lw $i hw/*/Kconfig` done < default-configs/usb.mak followed by adding "select USB" on the host controllers. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-33-yang.zhong@intel.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-23 09:56:06 +03:00
default y
depends on USB
kconfig: introduce kconfig files The Kconfig files were generated mostly with this script: for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' ` shift if test $# = 1; then cat >> $(dirname $1)/Kconfig << EOF config ${i#CONFIG_} bool EOF git add $(dirname $1)/Kconfig else echo $i $* fi done sed -i '$d' hw/*/Kconfig for i in hw/*; do if test -d $i && ! test -f $i/Kconfig; then touch $i/Kconfig git add $i/Kconfig fi done Whenever a symbol is referenced from multiple subdirectories, the script prints the list of directories that reference the symbol. These symbols have to be added manually to the Kconfig files. Kconfig.host and hw/Kconfig were created manually. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-27-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-23 09:56:00 +03:00
config USB_SERIAL
bool
build: convert usb.mak to Kconfig Instead of including the same list of devices for each target, let the host controllers select CONFIG_USB and make the devices default to present whenever USB is available. Done with the following script: while read i; do i=${i%=y}; i=${i#CONFIG_} sed -i -e'/^config '$i'$/!b' -en \ -e'a\' -e' default y\' -e' depends on USB' \ `grep -lw $i hw/*/Kconfig` done < default-configs/usb.mak followed by adding "select USB" on the host controllers. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-33-yang.zhong@intel.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-23 09:56:06 +03:00
default y
depends on USB
kconfig: introduce kconfig files The Kconfig files were generated mostly with this script: for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' ` shift if test $# = 1; then cat >> $(dirname $1)/Kconfig << EOF config ${i#CONFIG_} bool EOF git add $(dirname $1)/Kconfig else echo $i $* fi done sed -i '$d' hw/*/Kconfig for i in hw/*; do if test -d $i && ! test -f $i/Kconfig; then touch $i/Kconfig git add $i/Kconfig fi done Whenever a symbol is referenced from multiple subdirectories, the script prints the list of directories that reference the symbol. These symbols have to be added manually to the Kconfig files. Kconfig.host and hw/Kconfig were created manually. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-27-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-23 09:56:00 +03:00
config USB_NETWORK
bool
build: convert usb.mak to Kconfig Instead of including the same list of devices for each target, let the host controllers select CONFIG_USB and make the devices default to present whenever USB is available. Done with the following script: while read i; do i=${i%=y}; i=${i#CONFIG_} sed -i -e'/^config '$i'$/!b' -en \ -e'a\' -e' default y\' -e' depends on USB' \ `grep -lw $i hw/*/Kconfig` done < default-configs/usb.mak followed by adding "select USB" on the host controllers. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-33-yang.zhong@intel.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-23 09:56:06 +03:00
default y
depends on USB
kconfig: introduce kconfig files The Kconfig files were generated mostly with this script: for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' ` shift if test $# = 1; then cat >> $(dirname $1)/Kconfig << EOF config ${i#CONFIG_} bool EOF git add $(dirname $1)/Kconfig else echo $i $* fi done sed -i '$d' hw/*/Kconfig for i in hw/*; do if test -d $i && ! test -f $i/Kconfig; then touch $i/Kconfig git add $i/Kconfig fi done Whenever a symbol is referenced from multiple subdirectories, the script prints the list of directories that reference the symbol. These symbols have to be added manually to the Kconfig files. Kconfig.host and hw/Kconfig were created manually. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-27-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-23 09:56:00 +03:00
config USB_SMARTCARD
bool
build: convert usb.mak to Kconfig Instead of including the same list of devices for each target, let the host controllers select CONFIG_USB and make the devices default to present whenever USB is available. Done with the following script: while read i; do i=${i%=y}; i=${i#CONFIG_} sed -i -e'/^config '$i'$/!b' -en \ -e'a\' -e' default y\' -e' depends on USB' \ `grep -lw $i hw/*/Kconfig` done < default-configs/usb.mak followed by adding "select USB" on the host controllers. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-33-yang.zhong@intel.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-23 09:56:06 +03:00
default y
depends on USB
kconfig: introduce kconfig files The Kconfig files were generated mostly with this script: for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' ` shift if test $# = 1; then cat >> $(dirname $1)/Kconfig << EOF config ${i#CONFIG_} bool EOF git add $(dirname $1)/Kconfig else echo $i $* fi done sed -i '$d' hw/*/Kconfig for i in hw/*; do if test -d $i && ! test -f $i/Kconfig; then touch $i/Kconfig git add $i/Kconfig fi done Whenever a symbol is referenced from multiple subdirectories, the script prints the list of directories that reference the symbol. These symbols have to be added manually to the Kconfig files. Kconfig.host and hw/Kconfig were created manually. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-27-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-23 09:56:00 +03:00
config USB_STORAGE_MTP
bool
build: convert usb.mak to Kconfig Instead of including the same list of devices for each target, let the host controllers select CONFIG_USB and make the devices default to present whenever USB is available. Done with the following script: while read i; do i=${i%=y}; i=${i#CONFIG_} sed -i -e'/^config '$i'$/!b' -en \ -e'a\' -e' default y\' -e' depends on USB' \ `grep -lw $i hw/*/Kconfig` done < default-configs/usb.mak followed by adding "select USB" on the host controllers. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-33-yang.zhong@intel.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-23 09:56:06 +03:00
default y
depends on USB
hw/usb: Add basic i.MX USB Phy support Add basic USB PHY support as implemented in i.MX23, i.MX28, i.MX6, and i.MX7 SoCs. The only support really needed - at least to boot Linux - is support for soft reset, which needs to reset various registers to their initial value. Otherwise, just record register values. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20200313014551.12554-2-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-13 04:45:47 +03:00
meson: Add U2F key to meson Signed-off-by: César Belley <cesar.belley@lse.epita.fr> Message-id: 20200826114209.28821-8-cesar.belley@lse.epita.fr [ fixes suggested by paolo ] Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-08-26 14:42:04 +03:00
config USB_U2F
bool
default y
depends on USB
meson: Add CanoKey Signed-off-by: Hongren (Zenithal) Zheng <i@zenithal.me> Message-Id: <YoY6YRD6cxH21mms@Sun> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2022-05-19 15:38:57 +03:00
config USB_CANOKEY
bool
default y
depends on USB
hw/usb: Add basic i.MX USB Phy support Add basic USB PHY support as implemented in i.MX23, i.MX28, i.MX6, and i.MX7 SoCs. The only support really needed - at least to boot Linux - is support for soft reset, which needs to reset various registers to their initial value. Otherwise, just record register values. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20200313014551.12554-2-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-13 04:45:47 +03:00
config IMX_USBPHY
bool
default y
depends on USB
usb: Add DWC3 model This patch adds skeleton model of dwc3 usb controller attached to xhci-sysbus device. It defines global register space of DWC3 controller, global registers control the AXI/AHB interfaces properties, external FIFO support and event count support. All of which are unimplemented at present,we are only supporting core reset and read of ID register. Signed-off-by: Vikram Garhwal <fnu.vikram@xilinx.com> Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1607023357-5096-3-git-send-email-sai.pavan.boddu@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-12-03 22:22:35 +03:00
config USB_DWC3
bool
select USB_XHCI_SYSBUS
select REGISTER
usb: xlnx-usb-subsystem: Add xilinx usb subsystem This model is a top level integration wrapper for hcd-dwc3 and versal-usb2-ctrl-regs modules, this is used by xilinx versal soc's and future xilinx usb subsystems would also be part of it. Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1607023357-5096-4-git-send-email-sai.pavan.boddu@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-12-03 22:22:36 +03:00
config XLNX_USB_SUBSYS
bool
select USB_DWC3
Reference in New Issue Copy Permalink