tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
/*
|
|
|
|
* Vhost User Bridge
|
|
|
|
*
|
|
|
|
* Copyright (c) 2015 Red Hat, Inc.
|
|
|
|
*
|
|
|
|
* Authors:
|
|
|
|
* Victor Kaplansky <victork@redhat.com>
|
|
|
|
*
|
|
|
|
* This work is licensed under the terms of the GNU GPL, version 2 or
|
|
|
|
* later. See the COPYING file in the top-level directory.
|
|
|
|
*/
|
|
|
|
|
|
|
|
/*
|
|
|
|
* TODO:
|
|
|
|
* - main should get parameters from the command line.
|
2015-11-17 13:04:06 +03:00
|
|
|
* - implement all request handlers. Still not implemented:
|
|
|
|
* vubr_get_queue_num_exec()
|
|
|
|
* vubr_send_rarp_exec()
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
* - test for broken requests and virtqueue.
|
|
|
|
* - implement features defined by Virtio 1.0 spec.
|
|
|
|
* - support mergeable buffers and indirect descriptors.
|
|
|
|
* - implement clean shutdown.
|
|
|
|
* - implement non-blocking writes to UDP backend.
|
|
|
|
* - implement polling strategy.
|
2015-11-17 13:04:06 +03:00
|
|
|
* - implement clean starting/stopping of vq processing
|
|
|
|
* - implement clean starting/stopping of used and buffers
|
|
|
|
* dirty page logging.
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
*/
|
|
|
|
|
2015-11-17 13:04:06 +03:00
|
|
|
#define _FILE_OFFSET_BITS 64
|
|
|
|
|
2016-02-08 21:08:51 +03:00
|
|
|
#include "qemu/osdep.h"
|
2018-12-04 20:25:35 +03:00
|
|
|
#include "qemu/atomic.h"
|
2019-05-23 17:35:06 +03:00
|
|
|
#include "qemu/ctype.h"
|
2016-10-18 12:24:05 +03:00
|
|
|
#include "qemu/iov.h"
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
#include "standard-headers/linux/virtio_net.h"
|
2016-10-18 12:24:05 +03:00
|
|
|
#include "contrib/libvhost-user/libvhost-user.h"
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
|
|
|
|
#define VHOST_USER_BRIDGE_DEBUG 1
|
|
|
|
|
|
|
|
#define DPRINT(...) \
|
|
|
|
do { \
|
|
|
|
if (VHOST_USER_BRIDGE_DEBUG) { \
|
|
|
|
printf(__VA_ARGS__); \
|
|
|
|
} \
|
|
|
|
} while (0)
|
|
|
|
|
|
|
|
typedef void (*CallbackFunc)(int sock, void *ctx);
|
|
|
|
|
|
|
|
typedef struct Event {
|
|
|
|
void *ctx;
|
|
|
|
CallbackFunc callback;
|
|
|
|
} Event;
|
|
|
|
|
|
|
|
typedef struct Dispatcher {
|
|
|
|
int max_sock;
|
|
|
|
fd_set fdset;
|
|
|
|
Event events[FD_SETSIZE];
|
|
|
|
} Dispatcher;
|
|
|
|
|
2016-10-18 12:24:05 +03:00
|
|
|
typedef struct VubrDev {
|
|
|
|
VuDev vudev;
|
|
|
|
Dispatcher dispatcher;
|
|
|
|
int backend_udp_sock;
|
|
|
|
struct sockaddr_in backend_udp_dest;
|
|
|
|
int hdrlen;
|
|
|
|
int sock;
|
|
|
|
int ready;
|
|
|
|
int quit;
|
2018-05-24 13:33:36 +03:00
|
|
|
struct {
|
|
|
|
int fd;
|
|
|
|
void *addr;
|
|
|
|
pthread_t thread;
|
|
|
|
} notifier;
|
2016-10-18 12:24:05 +03:00
|
|
|
} VubrDev;
|
|
|
|
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
static void
|
|
|
|
vubr_die(const char *s)
|
|
|
|
{
|
|
|
|
perror(s);
|
|
|
|
exit(1);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
dispatcher_init(Dispatcher *dispr)
|
|
|
|
{
|
|
|
|
FD_ZERO(&dispr->fdset);
|
|
|
|
dispr->max_sock = -1;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
dispatcher_add(Dispatcher *dispr, int sock, void *ctx, CallbackFunc cb)
|
|
|
|
{
|
|
|
|
if (sock >= FD_SETSIZE) {
|
|
|
|
fprintf(stderr,
|
|
|
|
"Error: Failed to add new event. sock %d should be less than %d\n",
|
|
|
|
sock, FD_SETSIZE);
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
dispr->events[sock].ctx = ctx;
|
|
|
|
dispr->events[sock].callback = cb;
|
|
|
|
|
|
|
|
FD_SET(sock, &dispr->fdset);
|
|
|
|
if (sock > dispr->max_sock) {
|
|
|
|
dispr->max_sock = sock;
|
|
|
|
}
|
|
|
|
DPRINT("Added sock %d for watching. max_sock: %d\n",
|
|
|
|
sock, dispr->max_sock);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
dispatcher_remove(Dispatcher *dispr, int sock)
|
|
|
|
{
|
|
|
|
if (sock >= FD_SETSIZE) {
|
|
|
|
fprintf(stderr,
|
|
|
|
"Error: Failed to remove event. sock %d should be less than %d\n",
|
|
|
|
sock, FD_SETSIZE);
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
FD_CLR(sock, &dispr->fdset);
|
2015-12-01 19:57:39 +03:00
|
|
|
DPRINT("Sock %d removed from dispatcher watch.\n", sock);
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* timeout in us */
|
|
|
|
static int
|
|
|
|
dispatcher_wait(Dispatcher *dispr, uint32_t timeout)
|
|
|
|
{
|
|
|
|
struct timeval tv;
|
|
|
|
tv.tv_sec = timeout / 1000000;
|
|
|
|
tv.tv_usec = timeout % 1000000;
|
|
|
|
|
|
|
|
fd_set fdset = dispr->fdset;
|
|
|
|
|
|
|
|
/* wait until some of sockets become readable. */
|
|
|
|
int rc = select(dispr->max_sock + 1, &fdset, 0, 0, &tv);
|
|
|
|
|
|
|
|
if (rc == -1) {
|
|
|
|
vubr_die("select");
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Timeout */
|
|
|
|
if (rc == 0) {
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Now call callback for every ready socket. */
|
|
|
|
|
|
|
|
int sock;
|
2015-12-01 19:57:39 +03:00
|
|
|
for (sock = 0; sock < dispr->max_sock + 1; sock++) {
|
|
|
|
/* The callback on a socket can remove other sockets from the
|
|
|
|
* dispatcher, thus we have to check that the socket is
|
|
|
|
* still not removed from dispatcher's list
|
|
|
|
*/
|
|
|
|
if (FD_ISSET(sock, &fdset) && FD_ISSET(sock, &dispr->fdset)) {
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
Event *e = &dispr->events[sock];
|
|
|
|
e->callback(sock, e->ctx);
|
|
|
|
}
|
2015-12-01 19:57:39 +03:00
|
|
|
}
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
2016-10-18 12:24:05 +03:00
|
|
|
vubr_handle_tx(VuDev *dev, int qidx)
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
{
|
2016-10-18 12:24:05 +03:00
|
|
|
VuVirtq *vq = vu_get_queue(dev, qidx);
|
|
|
|
VubrDev *vubr = container_of(dev, VubrDev, vudev);
|
|
|
|
int hdrlen = vubr->hdrlen;
|
|
|
|
VuVirtqElement *elem = NULL;
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
|
2016-10-18 12:24:05 +03:00
|
|
|
assert(qidx % 2);
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
|
2016-10-18 12:24:05 +03:00
|
|
|
for (;;) {
|
|
|
|
ssize_t ret;
|
|
|
|
unsigned int out_num;
|
|
|
|
struct iovec sg[VIRTQUEUE_MAX_SIZE], *out_sg;
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
|
2016-10-18 12:24:05 +03:00
|
|
|
elem = vu_queue_pop(dev, vq, sizeof(VuVirtqElement));
|
|
|
|
if (!elem) {
|
|
|
|
break;
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
}
|
|
|
|
|
2016-10-18 12:24:05 +03:00
|
|
|
out_num = elem->out_num;
|
|
|
|
out_sg = elem->out_sg;
|
|
|
|
if (out_num < 1) {
|
|
|
|
fprintf(stderr, "virtio-net header not in first element\n");
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
break;
|
|
|
|
}
|
2016-10-18 12:24:05 +03:00
|
|
|
if (VHOST_USER_BRIDGE_DEBUG) {
|
|
|
|
iov_hexdump(out_sg, out_num, stderr, "TX:", 1024);
|
2015-11-17 13:04:06 +03:00
|
|
|
}
|
2016-10-18 12:24:05 +03:00
|
|
|
|
|
|
|
if (hdrlen) {
|
|
|
|
unsigned sg_num = iov_copy(sg, ARRAY_SIZE(sg),
|
|
|
|
out_sg, out_num,
|
|
|
|
hdrlen, -1);
|
|
|
|
out_num = sg_num;
|
|
|
|
out_sg = sg;
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
}
|
|
|
|
|
2016-10-18 12:24:05 +03:00
|
|
|
struct msghdr msg = {
|
|
|
|
.msg_name = (struct sockaddr *) &vubr->backend_udp_dest,
|
|
|
|
.msg_namelen = sizeof(struct sockaddr_in),
|
|
|
|
.msg_iov = out_sg,
|
|
|
|
.msg_iovlen = out_num,
|
|
|
|
};
|
|
|
|
do {
|
|
|
|
ret = sendmsg(vubr->backend_udp_sock, &msg, 0);
|
|
|
|
} while (ret == -1 && (errno == EAGAIN || errno == EINTR));
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
|
2016-10-18 12:24:05 +03:00
|
|
|
if (ret == -1) {
|
|
|
|
vubr_die("sendmsg()");
|
|
|
|
}
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
|
2016-10-18 12:24:05 +03:00
|
|
|
vu_queue_push(dev, vq, elem, 0);
|
|
|
|
vu_queue_notify(dev, vq);
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
|
2016-10-18 12:24:05 +03:00
|
|
|
free(elem);
|
|
|
|
elem = NULL;
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
}
|
|
|
|
|
2016-10-18 12:24:05 +03:00
|
|
|
free(elem);
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
}
|
|
|
|
|
2017-06-02 11:15:19 +03:00
|
|
|
|
|
|
|
/* this function reverse the effect of iov_discard_front() it must be
|
|
|
|
* called with 'front' being the original struct iovec and 'bytes'
|
|
|
|
* being the number of bytes you shaved off
|
|
|
|
*/
|
2016-10-18 12:24:05 +03:00
|
|
|
static void
|
|
|
|
iov_restore_front(struct iovec *front, struct iovec *iov, size_t bytes)
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
{
|
2016-10-18 12:24:05 +03:00
|
|
|
struct iovec *cur;
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
|
2017-06-02 11:15:19 +03:00
|
|
|
for (cur = front; cur != iov; cur++) {
|
|
|
|
assert(bytes >= cur->iov_len);
|
2016-10-18 12:24:05 +03:00
|
|
|
bytes -= cur->iov_len;
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
}
|
|
|
|
|
2016-10-18 12:24:05 +03:00
|
|
|
cur->iov_base -= bytes;
|
|
|
|
cur->iov_len += bytes;
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
2016-10-18 12:24:05 +03:00
|
|
|
iov_truncate(struct iovec *iov, unsigned iovc, size_t bytes)
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
{
|
2016-10-18 12:24:05 +03:00
|
|
|
unsigned i;
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
|
2016-10-18 12:24:05 +03:00
|
|
|
for (i = 0; i < iovc; i++, iov++) {
|
|
|
|
if (bytes < iov->iov_len) {
|
|
|
|
iov->iov_len = bytes;
|
|
|
|
return;
|
|
|
|
}
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
|
2016-10-18 12:24:05 +03:00
|
|
|
bytes -= iov->iov_len;
|
2015-11-17 13:04:06 +03:00
|
|
|
}
|
|
|
|
|
2016-10-18 12:24:05 +03:00
|
|
|
assert(!"couldn't truncate iov");
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
}
|
|
|
|
|
2015-11-17 13:04:06 +03:00
|
|
|
static void
|
2016-10-18 12:24:05 +03:00
|
|
|
vubr_backend_recv_cb(int sock, void *ctx)
|
2015-11-17 13:04:06 +03:00
|
|
|
{
|
2016-10-18 12:24:05 +03:00
|
|
|
VubrDev *vubr = (VubrDev *) ctx;
|
|
|
|
VuDev *dev = &vubr->vudev;
|
|
|
|
VuVirtq *vq = vu_get_queue(dev, 0);
|
|
|
|
VuVirtqElement *elem = NULL;
|
|
|
|
struct iovec mhdr_sg[VIRTQUEUE_MAX_SIZE];
|
|
|
|
struct virtio_net_hdr_mrg_rxbuf mhdr;
|
|
|
|
unsigned mhdr_cnt = 0;
|
|
|
|
int hdrlen = vubr->hdrlen;
|
|
|
|
int i = 0;
|
|
|
|
struct virtio_net_hdr hdr = {
|
|
|
|
.flags = 0,
|
|
|
|
.gso_type = VIRTIO_NET_HDR_GSO_NONE
|
|
|
|
};
|
2015-11-17 13:04:06 +03:00
|
|
|
|
2016-10-18 12:24:05 +03:00
|
|
|
DPRINT("\n\n *** IN UDP RECEIVE CALLBACK ***\n\n");
|
|
|
|
DPRINT(" hdrlen = %d\n", hdrlen);
|
2015-11-17 13:04:06 +03:00
|
|
|
|
2016-10-18 12:24:05 +03:00
|
|
|
if (!vu_queue_enabled(dev, vq) ||
|
2017-10-02 22:15:19 +03:00
|
|
|
!vu_queue_started(dev, vq) ||
|
2016-10-18 12:24:05 +03:00
|
|
|
!vu_queue_avail_bytes(dev, vq, hdrlen, 0)) {
|
|
|
|
DPRINT("Got UDP packet, but no available descriptors on RX virtq.\n");
|
2015-11-17 13:04:06 +03:00
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
2017-12-02 02:24:31 +03:00
|
|
|
while (1) {
|
2016-10-18 12:24:05 +03:00
|
|
|
struct iovec *sg;
|
|
|
|
ssize_t ret, total = 0;
|
|
|
|
unsigned int num;
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
|
2016-10-18 12:24:05 +03:00
|
|
|
elem = vu_queue_pop(dev, vq, sizeof(VuVirtqElement));
|
|
|
|
if (!elem) {
|
2016-02-18 17:45:05 +03:00
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
2016-10-18 12:24:05 +03:00
|
|
|
if (elem->in_num < 1) {
|
|
|
|
fprintf(stderr, "virtio-net contains no in buffers\n");
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
2016-10-18 12:24:05 +03:00
|
|
|
sg = elem->in_sg;
|
|
|
|
num = elem->in_num;
|
|
|
|
if (i == 0) {
|
|
|
|
if (hdrlen == 12) {
|
|
|
|
mhdr_cnt = iov_copy(mhdr_sg, ARRAY_SIZE(mhdr_sg),
|
|
|
|
sg, elem->in_num,
|
|
|
|
offsetof(typeof(mhdr), num_buffers),
|
|
|
|
sizeof(mhdr.num_buffers));
|
|
|
|
}
|
|
|
|
iov_from_buf(sg, elem->in_num, 0, &hdr, sizeof hdr);
|
|
|
|
total += hdrlen;
|
2017-06-02 11:15:19 +03:00
|
|
|
ret = iov_discard_front(&sg, &num, hdrlen);
|
|
|
|
assert(ret == hdrlen);
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
}
|
|
|
|
|
2016-10-18 12:24:05 +03:00
|
|
|
struct msghdr msg = {
|
|
|
|
.msg_name = (struct sockaddr *) &vubr->backend_udp_dest,
|
|
|
|
.msg_namelen = sizeof(struct sockaddr_in),
|
|
|
|
.msg_iov = sg,
|
2018-11-09 20:30:28 +03:00
|
|
|
.msg_iovlen = num,
|
2016-10-18 12:24:05 +03:00
|
|
|
.msg_flags = MSG_DONTWAIT,
|
|
|
|
};
|
|
|
|
do {
|
|
|
|
ret = recvmsg(vubr->backend_udp_sock, &msg, 0);
|
|
|
|
} while (ret == -1 && (errno == EINTR));
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
|
2016-10-18 12:24:05 +03:00
|
|
|
if (i == 0) {
|
|
|
|
iov_restore_front(elem->in_sg, sg, hdrlen);
|
|
|
|
}
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
|
2016-10-18 12:24:05 +03:00
|
|
|
if (ret == -1) {
|
|
|
|
if (errno == EWOULDBLOCK) {
|
|
|
|
vu_queue_rewind(dev, vq, 1);
|
|
|
|
break;
|
|
|
|
}
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
|
2016-10-18 12:24:05 +03:00
|
|
|
vubr_die("recvmsg()");
|
|
|
|
}
|
2015-11-17 13:04:06 +03:00
|
|
|
|
2016-10-18 12:24:05 +03:00
|
|
|
total += ret;
|
|
|
|
iov_truncate(elem->in_sg, elem->in_num, total);
|
|
|
|
vu_queue_fill(dev, vq, elem, total, i++);
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
|
2016-10-18 12:24:05 +03:00
|
|
|
free(elem);
|
|
|
|
elem = NULL;
|
2017-12-02 02:24:31 +03:00
|
|
|
|
|
|
|
break; /* could loop if DONTWAIT worked? */
|
|
|
|
}
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
|
2016-10-18 12:24:05 +03:00
|
|
|
if (mhdr_cnt) {
|
|
|
|
mhdr.num_buffers = i;
|
|
|
|
iov_from_buf(mhdr_sg, mhdr_cnt,
|
|
|
|
0,
|
|
|
|
&mhdr.num_buffers, sizeof mhdr.num_buffers);
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
}
|
|
|
|
|
2016-10-18 12:24:05 +03:00
|
|
|
vu_queue_flush(dev, vq, i);
|
|
|
|
vu_queue_notify(dev, vq);
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
|
2016-10-18 12:24:05 +03:00
|
|
|
free(elem);
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
2016-10-18 12:24:05 +03:00
|
|
|
vubr_receive_cb(int sock, void *ctx)
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
{
|
2016-10-18 12:24:05 +03:00
|
|
|
VubrDev *vubr = (VubrDev *)ctx;
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
|
2016-10-18 12:24:05 +03:00
|
|
|
if (!vu_dispatch(&vubr->vudev)) {
|
|
|
|
fprintf(stderr, "Error while dispatching\n");
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2016-10-18 12:24:05 +03:00
|
|
|
typedef struct WatchData {
|
|
|
|
VuDev *dev;
|
|
|
|
vu_watch_cb cb;
|
|
|
|
void *data;
|
|
|
|
} WatchData;
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
|
2016-10-18 12:24:05 +03:00
|
|
|
static void
|
|
|
|
watch_cb(int sock, void *ctx)
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
{
|
2016-10-18 12:24:05 +03:00
|
|
|
struct WatchData *wd = ctx;
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
|
2016-10-18 12:24:05 +03:00
|
|
|
wd->cb(wd->dev, VU_WATCH_IN, wd->data);
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
}
|
|
|
|
|
2016-10-18 12:24:05 +03:00
|
|
|
static void
|
|
|
|
vubr_set_watch(VuDev *dev, int fd, int condition,
|
|
|
|
vu_watch_cb cb, void *data)
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
{
|
2016-10-18 12:24:05 +03:00
|
|
|
VubrDev *vubr = container_of(dev, VubrDev, vudev);
|
|
|
|
static WatchData watches[FD_SETSIZE];
|
|
|
|
struct WatchData *wd = &watches[fd];
|
2016-02-18 17:45:05 +03:00
|
|
|
|
2016-10-18 12:24:05 +03:00
|
|
|
wd->cb = cb;
|
|
|
|
wd->data = data;
|
|
|
|
wd->dev = dev;
|
|
|
|
dispatcher_add(&vubr->dispatcher, fd, wd, watch_cb);
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
}
|
|
|
|
|
2015-11-17 13:04:06 +03:00
|
|
|
static void
|
2016-10-18 12:24:05 +03:00
|
|
|
vubr_remove_watch(VuDev *dev, int fd)
|
2015-11-17 13:04:06 +03:00
|
|
|
{
|
2016-10-18 12:24:05 +03:00
|
|
|
VubrDev *vubr = container_of(dev, VubrDev, vudev);
|
2015-11-17 13:04:06 +03:00
|
|
|
|
2016-10-18 12:24:05 +03:00
|
|
|
dispatcher_remove(&vubr->dispatcher, fd);
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
2016-10-18 12:24:05 +03:00
|
|
|
vubr_send_rarp_exec(VuDev *dev, VhostUserMsg *vmsg)
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
{
|
2016-10-18 12:24:05 +03:00
|
|
|
DPRINT("Function %s() not implemented yet.\n", __func__);
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
2016-10-18 12:24:05 +03:00
|
|
|
vubr_process_msg(VuDev *dev, VhostUserMsg *vmsg, int *do_reply)
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
{
|
2016-10-18 12:24:05 +03:00
|
|
|
switch (vmsg->request) {
|
|
|
|
case VHOST_USER_SEND_RARP:
|
|
|
|
*do_reply = vubr_send_rarp_exec(dev, vmsg);
|
|
|
|
return 1;
|
|
|
|
default:
|
|
|
|
/* let the library handle the rest */
|
|
|
|
return 0;
|
2015-11-17 13:04:06 +03:00
|
|
|
}
|
|
|
|
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2016-10-18 12:24:05 +03:00
|
|
|
static void
|
|
|
|
vubr_set_features(VuDev *dev, uint64_t features)
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
{
|
2016-10-18 12:24:05 +03:00
|
|
|
VubrDev *vubr = container_of(dev, VubrDev, vudev);
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
|
2016-10-18 12:24:05 +03:00
|
|
|
if ((features & (1ULL << VIRTIO_F_VERSION_1)) ||
|
|
|
|
(features & (1ULL << VIRTIO_NET_F_MRG_RXBUF))) {
|
|
|
|
vubr->hdrlen = 12;
|
|
|
|
} else {
|
|
|
|
vubr->hdrlen = 10;
|
2016-06-06 19:45:01 +03:00
|
|
|
}
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
}
|
|
|
|
|
2016-10-18 12:24:05 +03:00
|
|
|
static uint64_t
|
|
|
|
vubr_get_features(VuDev *dev)
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
{
|
2016-10-18 12:24:05 +03:00
|
|
|
return 1ULL << VIRTIO_NET_F_GUEST_ANNOUNCE |
|
2018-05-24 13:33:36 +03:00
|
|
|
1ULL << VIRTIO_NET_F_MRG_RXBUF |
|
|
|
|
1ULL << VIRTIO_F_VERSION_1;
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
}
|
|
|
|
|
2016-10-18 12:24:05 +03:00
|
|
|
static void
|
|
|
|
vubr_queue_set_started(VuDev *dev, int qidx, bool started)
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
{
|
2018-05-24 13:33:36 +03:00
|
|
|
VubrDev *vubr = container_of(dev, VubrDev, vudev);
|
2016-10-18 12:24:05 +03:00
|
|
|
VuVirtq *vq = vu_get_queue(dev, qidx);
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
|
2018-05-24 13:33:36 +03:00
|
|
|
if (started && vubr->notifier.fd >= 0) {
|
|
|
|
vu_set_queue_host_notifier(dev, vq, vubr->notifier.fd,
|
|
|
|
getpagesize(),
|
|
|
|
qidx * getpagesize());
|
|
|
|
}
|
|
|
|
|
2016-10-18 12:24:05 +03:00
|
|
|
if (qidx % 2 == 1) {
|
|
|
|
vu_set_queue_handler(dev, vq, started ? vubr_handle_tx : NULL);
|
2015-12-01 19:57:39 +03:00
|
|
|
}
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
}
|
|
|
|
|
2016-10-18 12:24:05 +03:00
|
|
|
static void
|
|
|
|
vubr_panic(VuDev *dev, const char *msg)
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
{
|
2016-10-18 12:24:05 +03:00
|
|
|
VubrDev *vubr = container_of(dev, VubrDev, vudev);
|
2015-11-17 13:04:06 +03:00
|
|
|
|
2016-10-18 12:24:05 +03:00
|
|
|
fprintf(stderr, "PANIC: %s\n", msg);
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
|
2016-10-18 12:24:05 +03:00
|
|
|
dispatcher_remove(&vubr->dispatcher, dev->sock);
|
|
|
|
vubr->quit = 1;
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
}
|
|
|
|
|
2017-08-29 18:27:51 +03:00
|
|
|
static bool
|
|
|
|
vubr_queue_is_processed_in_order(VuDev *dev, int qidx)
|
|
|
|
{
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
2016-10-18 12:24:05 +03:00
|
|
|
static const VuDevIface vuiface = {
|
|
|
|
.get_features = vubr_get_features,
|
|
|
|
.set_features = vubr_set_features,
|
|
|
|
.process_msg = vubr_process_msg,
|
|
|
|
.queue_set_started = vubr_queue_set_started,
|
2017-08-29 18:27:51 +03:00
|
|
|
.queue_is_processed_in_order = vubr_queue_is_processed_in_order,
|
2016-10-18 12:24:05 +03:00
|
|
|
};
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
|
|
|
|
static void
|
|
|
|
vubr_accept_cb(int sock, void *ctx)
|
|
|
|
{
|
|
|
|
VubrDev *dev = (VubrDev *)ctx;
|
|
|
|
int conn_fd;
|
|
|
|
struct sockaddr_un un;
|
|
|
|
socklen_t len = sizeof(un);
|
|
|
|
|
|
|
|
conn_fd = accept(sock, (struct sockaddr *) &un, &len);
|
2015-11-17 13:04:06 +03:00
|
|
|
if (conn_fd == -1) {
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
vubr_die("accept()");
|
|
|
|
}
|
|
|
|
DPRINT("Got connection from remote peer on sock %d\n", conn_fd);
|
2016-10-18 12:24:05 +03:00
|
|
|
|
|
|
|
vu_init(&dev->vudev,
|
|
|
|
conn_fd,
|
|
|
|
vubr_panic,
|
|
|
|
vubr_set_watch,
|
|
|
|
vubr_remove_watch,
|
|
|
|
&vuiface);
|
|
|
|
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
dispatcher_add(&dev->dispatcher, conn_fd, ctx, vubr_receive_cb);
|
2016-10-18 12:24:03 +03:00
|
|
|
dispatcher_remove(&dev->dispatcher, sock);
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
static VubrDev *
|
2016-06-06 19:45:00 +03:00
|
|
|
vubr_new(const char *path, bool client)
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
{
|
|
|
|
VubrDev *dev = (VubrDev *) calloc(1, sizeof(VubrDev));
|
|
|
|
struct sockaddr_un un;
|
2016-06-06 19:45:00 +03:00
|
|
|
CallbackFunc cb;
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
size_t len;
|
|
|
|
|
|
|
|
/* Get a UNIX socket. */
|
|
|
|
dev->sock = socket(AF_UNIX, SOCK_STREAM, 0);
|
|
|
|
if (dev->sock == -1) {
|
|
|
|
vubr_die("socket");
|
|
|
|
}
|
|
|
|
|
2018-05-24 13:33:36 +03:00
|
|
|
dev->notifier.fd = -1;
|
|
|
|
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
un.sun_family = AF_UNIX;
|
|
|
|
strcpy(un.sun_path, path);
|
|
|
|
len = sizeof(un.sun_family) + strlen(path);
|
|
|
|
|
2016-06-06 19:45:00 +03:00
|
|
|
if (!client) {
|
|
|
|
unlink(path);
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
|
2016-06-06 19:45:00 +03:00
|
|
|
if (bind(dev->sock, (struct sockaddr *) &un, len) == -1) {
|
|
|
|
vubr_die("bind");
|
|
|
|
}
|
|
|
|
|
|
|
|
if (listen(dev->sock, 1) == -1) {
|
|
|
|
vubr_die("listen");
|
|
|
|
}
|
|
|
|
cb = vubr_accept_cb;
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
|
2016-06-06 19:45:00 +03:00
|
|
|
DPRINT("Waiting for connections on UNIX socket %s ...\n", path);
|
|
|
|
} else {
|
|
|
|
if (connect(dev->sock, (struct sockaddr *)&un, len) == -1) {
|
|
|
|
vubr_die("connect");
|
|
|
|
}
|
2016-10-18 12:24:05 +03:00
|
|
|
vu_init(&dev->vudev,
|
|
|
|
dev->sock,
|
|
|
|
vubr_panic,
|
|
|
|
vubr_set_watch,
|
|
|
|
vubr_remove_watch,
|
|
|
|
&vuiface);
|
2016-06-06 19:45:00 +03:00
|
|
|
cb = vubr_receive_cb;
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
dispatcher_init(&dev->dispatcher);
|
2016-10-18 12:24:05 +03:00
|
|
|
|
2016-06-06 19:45:00 +03:00
|
|
|
dispatcher_add(&dev->dispatcher, dev->sock, (void *)dev, cb);
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
|
|
|
|
return dev;
|
|
|
|
}
|
|
|
|
|
2018-05-24 13:33:36 +03:00
|
|
|
static void *notifier_thread(void *arg)
|
|
|
|
{
|
|
|
|
VuDev *dev = (VuDev *)arg;
|
|
|
|
VubrDev *vubr = container_of(dev, VubrDev, vudev);
|
|
|
|
int pagesize = getpagesize();
|
|
|
|
int qidx;
|
|
|
|
|
|
|
|
while (true) {
|
|
|
|
for (qidx = 0; qidx < VHOST_MAX_NR_VIRTQUEUE; qidx++) {
|
|
|
|
uint16_t *n = vubr->notifier.addr + pagesize * qidx;
|
|
|
|
|
|
|
|
if (*n == qidx) {
|
|
|
|
*n = 0xffff;
|
|
|
|
/* We won't miss notifications if we reset
|
|
|
|
* the memory first. */
|
|
|
|
smp_mb();
|
|
|
|
|
|
|
|
DPRINT("Got a notification for queue%d via host notifier.\n",
|
|
|
|
qidx);
|
|
|
|
|
|
|
|
if (qidx % 2 == 1) {
|
|
|
|
vubr_handle_tx(dev, qidx);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
usleep(1000);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
vubr_host_notifier_setup(VubrDev *dev)
|
|
|
|
{
|
|
|
|
char template[] = "/tmp/vubr-XXXXXX";
|
|
|
|
pthread_t thread;
|
|
|
|
size_t length;
|
|
|
|
void *addr;
|
|
|
|
int fd;
|
|
|
|
|
|
|
|
length = getpagesize() * VHOST_MAX_NR_VIRTQUEUE;
|
|
|
|
|
|
|
|
fd = mkstemp(template);
|
|
|
|
if (fd < 0) {
|
|
|
|
vubr_die("mkstemp()");
|
|
|
|
}
|
|
|
|
|
|
|
|
if (posix_fallocate(fd, 0, length) != 0) {
|
|
|
|
vubr_die("posix_fallocate()");
|
|
|
|
}
|
|
|
|
|
|
|
|
addr = mmap(NULL, length, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0);
|
|
|
|
if (addr == MAP_FAILED) {
|
|
|
|
vubr_die("mmap()");
|
|
|
|
}
|
|
|
|
|
|
|
|
memset(addr, 0xff, length);
|
|
|
|
|
|
|
|
if (pthread_create(&thread, NULL, notifier_thread, &dev->vudev) != 0) {
|
|
|
|
vubr_die("pthread_create()");
|
|
|
|
}
|
|
|
|
|
|
|
|
dev->notifier.fd = fd;
|
|
|
|
dev->notifier.addr = addr;
|
|
|
|
dev->notifier.thread = thread;
|
|
|
|
}
|
|
|
|
|
2015-11-24 13:56:00 +03:00
|
|
|
static void
|
|
|
|
vubr_set_host(struct sockaddr_in *saddr, const char *host)
|
|
|
|
{
|
2019-05-14 21:03:07 +03:00
|
|
|
if (qemu_isdigit(host[0])) {
|
2015-11-24 13:56:00 +03:00
|
|
|
if (!inet_aton(host, &saddr->sin_addr)) {
|
|
|
|
fprintf(stderr, "inet_aton() failed.\n");
|
|
|
|
exit(1);
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
struct hostent *he = gethostbyname(host);
|
|
|
|
|
|
|
|
if (!he) {
|
|
|
|
fprintf(stderr, "gethostbyname() failed.\n");
|
|
|
|
exit(1);
|
|
|
|
}
|
|
|
|
saddr->sin_addr = *(struct in_addr *)he->h_addr;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
static void
|
|
|
|
vubr_backend_udp_setup(VubrDev *dev,
|
|
|
|
const char *local_host,
|
2015-11-24 13:56:00 +03:00
|
|
|
const char *local_port,
|
|
|
|
const char *remote_host,
|
|
|
|
const char *remote_port)
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
{
|
|
|
|
int sock;
|
2015-11-24 13:56:00 +03:00
|
|
|
const char *r;
|
|
|
|
|
|
|
|
int lport, rport;
|
|
|
|
|
|
|
|
lport = strtol(local_port, (char **)&r, 0);
|
|
|
|
if (r == local_port) {
|
|
|
|
fprintf(stderr, "lport parsing failed.\n");
|
|
|
|
exit(1);
|
|
|
|
}
|
|
|
|
|
|
|
|
rport = strtol(remote_port, (char **)&r, 0);
|
|
|
|
if (r == remote_port) {
|
|
|
|
fprintf(stderr, "rport parsing failed.\n");
|
|
|
|
exit(1);
|
|
|
|
}
|
|
|
|
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
struct sockaddr_in si_local = {
|
|
|
|
.sin_family = AF_INET,
|
2015-11-24 13:56:00 +03:00
|
|
|
.sin_port = htons(lport),
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
};
|
|
|
|
|
2015-11-24 13:56:00 +03:00
|
|
|
vubr_set_host(&si_local, local_host);
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
|
|
|
|
/* setup destination for sends */
|
|
|
|
dev->backend_udp_dest = (struct sockaddr_in) {
|
|
|
|
.sin_family = AF_INET,
|
2015-11-24 13:56:00 +03:00
|
|
|
.sin_port = htons(rport),
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
};
|
2015-11-24 13:56:00 +03:00
|
|
|
vubr_set_host(&dev->backend_udp_dest, remote_host);
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
|
|
|
|
sock = socket(AF_INET, SOCK_DGRAM, IPPROTO_UDP);
|
|
|
|
if (sock == -1) {
|
|
|
|
vubr_die("socket");
|
|
|
|
}
|
|
|
|
|
|
|
|
if (bind(sock, (struct sockaddr *)&si_local, sizeof(si_local)) == -1) {
|
|
|
|
vubr_die("bind");
|
|
|
|
}
|
|
|
|
|
|
|
|
dev->backend_udp_sock = sock;
|
|
|
|
dispatcher_add(&dev->dispatcher, sock, dev, vubr_backend_recv_cb);
|
|
|
|
DPRINT("Waiting for data from udp backend on %s:%d...\n",
|
2015-11-24 13:56:00 +03:00
|
|
|
local_host, lport);
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
vubr_run(VubrDev *dev)
|
|
|
|
{
|
2016-10-18 12:24:05 +03:00
|
|
|
while (!dev->quit) {
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
/* timeout 200ms */
|
|
|
|
dispatcher_wait(&dev->dispatcher, 200000);
|
|
|
|
/* Here one can try polling strategy. */
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2015-11-24 13:56:00 +03:00
|
|
|
static int
|
|
|
|
vubr_parse_host_port(const char **host, const char **port, const char *buf)
|
|
|
|
{
|
|
|
|
char *p = strchr(buf, ':');
|
|
|
|
|
|
|
|
if (!p) {
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
*p = '\0';
|
|
|
|
*host = strdup(buf);
|
|
|
|
*port = strdup(p + 1);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
#define DEFAULT_UD_SOCKET "/tmp/vubr.sock"
|
|
|
|
#define DEFAULT_LHOST "127.0.0.1"
|
|
|
|
#define DEFAULT_LPORT "4444"
|
|
|
|
#define DEFAULT_RHOST "127.0.0.1"
|
|
|
|
#define DEFAULT_RPORT "5555"
|
|
|
|
|
|
|
|
static const char *ud_socket_path = DEFAULT_UD_SOCKET;
|
|
|
|
static const char *lhost = DEFAULT_LHOST;
|
|
|
|
static const char *lport = DEFAULT_LPORT;
|
|
|
|
static const char *rhost = DEFAULT_RHOST;
|
|
|
|
static const char *rport = DEFAULT_RPORT;
|
|
|
|
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
int
|
|
|
|
main(int argc, char *argv[])
|
|
|
|
{
|
|
|
|
VubrDev *dev;
|
2015-11-24 13:56:00 +03:00
|
|
|
int opt;
|
2016-06-06 19:45:00 +03:00
|
|
|
bool client = false;
|
2018-05-24 13:33:36 +03:00
|
|
|
bool host_notifier = false;
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
|
2018-05-24 13:33:36 +03:00
|
|
|
while ((opt = getopt(argc, argv, "l:r:u:cH")) != -1) {
|
2015-11-24 13:56:00 +03:00
|
|
|
|
|
|
|
switch (opt) {
|
|
|
|
case 'l':
|
|
|
|
if (vubr_parse_host_port(&lhost, &lport, optarg) < 0) {
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
case 'r':
|
|
|
|
if (vubr_parse_host_port(&rhost, &rport, optarg) < 0) {
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
case 'u':
|
|
|
|
ud_socket_path = strdup(optarg);
|
|
|
|
break;
|
2016-06-06 19:45:00 +03:00
|
|
|
case 'c':
|
|
|
|
client = true;
|
|
|
|
break;
|
2018-05-24 13:33:36 +03:00
|
|
|
case 'H':
|
|
|
|
host_notifier = true;
|
|
|
|
break;
|
2015-11-24 13:56:00 +03:00
|
|
|
default:
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2016-06-06 19:45:00 +03:00
|
|
|
DPRINT("ud socket: %s (%s)\n", ud_socket_path,
|
|
|
|
client ? "client" : "server");
|
2015-11-24 13:56:00 +03:00
|
|
|
DPRINT("local: %s:%s\n", lhost, lport);
|
|
|
|
DPRINT("remote: %s:%s\n", rhost, rport);
|
|
|
|
|
2016-06-06 19:45:00 +03:00
|
|
|
dev = vubr_new(ud_socket_path, client);
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
if (!dev) {
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
2018-05-24 13:33:36 +03:00
|
|
|
if (host_notifier) {
|
|
|
|
vubr_host_notifier_setup(dev);
|
|
|
|
}
|
|
|
|
|
2015-11-24 13:56:00 +03:00
|
|
|
vubr_backend_udp_setup(dev, lhost, lport, rhost, rport);
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
vubr_run(dev);
|
2016-10-18 12:24:05 +03:00
|
|
|
|
|
|
|
vu_deinit(&dev->vudev);
|
|
|
|
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
return 0;
|
2015-11-24 13:56:00 +03:00
|
|
|
|
|
|
|
out:
|
|
|
|
fprintf(stderr, "Usage: %s ", argv[0]);
|
2018-05-24 13:33:36 +03:00
|
|
|
fprintf(stderr, "[-c] [-H] [-u ud_socket_path] [-l lhost:lport] [-r rhost:rport]\n");
|
2015-11-24 13:56:00 +03:00
|
|
|
fprintf(stderr, "\t-u path to unix doman socket. default: %s\n",
|
|
|
|
DEFAULT_UD_SOCKET);
|
|
|
|
fprintf(stderr, "\t-l local host and port. default: %s:%s\n",
|
|
|
|
DEFAULT_LHOST, DEFAULT_LPORT);
|
|
|
|
fprintf(stderr, "\t-r remote host and port. default: %s:%s\n",
|
|
|
|
DEFAULT_RHOST, DEFAULT_RPORT);
|
2016-06-06 19:45:00 +03:00
|
|
|
fprintf(stderr, "\t-c client mode\n");
|
2018-05-24 13:33:36 +03:00
|
|
|
fprintf(stderr, "\t-H use host notifier\n");
|
2015-11-24 13:56:00 +03:00
|
|
|
|
|
|
|
return 1;
|
tests/vhost-user-bridge: add vhost-user bridge application
The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.
Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.
For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.
This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.
To run Vhost-User Bridge application:
1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:
$ configure; make tests/vhost-user-bridge
2. Ensure the machine has hugepages enabled in kernel with
command line like:
default_hugepagesz=2M hugepagesz=2M hugepages=2048
3. Run Vhost-User Bridge with:
$ tests/vhost-user-bridge
The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444
Run qemu with a virtio-net backed by vhost-user:
$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img
vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".
PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-28 15:53:07 +03:00
|
|
|
}
|