qemu/target/ppc/power8-pmu-regs.c.inc

263 lines
6.6 KiB
PHP
Raw Normal View History

target/ppc: add user read/write functions for MMCR0 Userspace need access to PMU SPRs to be able to operate the PMU. One of such SPRs is MMCR0. MMCR0, as defined by PowerISA v3.1, is classified as a 'group A' PMU register. This class of registers has common read/write rules that are governed by MMCR0 PMCC bits. MMCR0 is also not fully exposed to problem state: only MMCR0_FC, MMCR0_PMAO and MMCR0_PMAE bits are readable/writable in this case. This patch exposes MMCR0 to userspace by doing the following: - two new callbacks, spr_read_MMCR0_ureg() and spr_write_MMCR0_ureg(), are added to be used as problem state read/write callbacks of UMMCR0. Both callbacks filters the amount of bits userspace is able to read/write by using a MMCR0_UREG_MASK; - problem state access control is done by the spr_groupA_read_allowed() and spr_groupA_write_allowed() helpers. These helpers will read the current PMCC bits from DisasContext and check whether the read/write MMCR0 operation is valid or noti; - to avoid putting exclusive PMU logic into the already loaded translate.c file, let's create a new 'power8-pmu-regs.c.inc' file that will hold all the spr_read/spr_write functions of PMU registers. The 'power8' name of this new file intends to hint about the proven support of the PMU logic to be added. The code has been tested with the IBM POWER chip family, POWER8 being the oldest version tested. This doesn't mean that the PMU logic will break with any other PPC64 chip that implements Book3s, but rather that we can't assert that it works properly with any Book3s compliant chip. CC: Gustavo Romero <gustavo.romero@linaro.org> Signed-off-by: Gustavo Romero <gromero@linux.ibm.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-Id: <20211018010133.315842-3-danielhb413@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-10-18 04:01:20 +03:00
/*
* PMU register read/write functions for TCG IBM POWER chips
*
* Copyright IBM Corp. 2021
*
* Authors:
* Daniel Henrique Barboza <danielhb413@gmail.com>
*
* This work is licensed under the terms of the GNU GPL, version 2 or later.
* See the COPYING file in the top-level directory.
*/
#if defined(TARGET_PPC64) && !defined(CONFIG_USER_ONLY)
/*
* Checks whether the Group A SPR (MMCR0, MMCR2, MMCRA, and the
* PMCs) has problem state read access.
*
* Read acccess is granted for all PMCC values but 0b01, where a
* Facility Unavailable Interrupt will occur.
*/
static bool spr_groupA_read_allowed(DisasContext *ctx)
{
if (!ctx->mmcr0_pmcc0 && ctx->mmcr0_pmcc1) {
gen_hvpriv_exception(ctx, POWERPC_EXCP_FU);
return false;
}
return true;
}
/*
* Checks whether the Group A SPR (MMCR0, MMCR2, MMCRA, and the
* PMCs) has problem state write access.
*
* Write acccess is granted for PMCC values 0b10 and 0b11. Userspace
* writing with PMCC 0b00 will generate a Hypervisor Emulation
* Assistance Interrupt. Userspace writing with PMCC 0b01 will
* generate a Facility Unavailable Interrupt.
*/
static bool spr_groupA_write_allowed(DisasContext *ctx)
{
if (ctx->mmcr0_pmcc0) {
return true;
}
if (ctx->mmcr0_pmcc1) {
/* PMCC = 0b01 */
gen_hvpriv_exception(ctx, POWERPC_EXCP_FU);
} else {
/* PMCC = 0b00 */
gen_hvpriv_exception(ctx, POWERPC_EXCP_INVAL_SPR);
}
return false;
}
/*
* Helper function to avoid code repetition between MMCR0 and
* MMCR2 problem state write functions.
*
* 'ret' must be tcg_temp_freed() by the caller.
*/
static TCGv masked_gprn_for_spr_write(int gprn, int sprn,
uint64_t spr_mask)
{
TCGv ret = tcg_temp_new();
TCGv t0 = tcg_temp_new();
/* 'ret' starts with all mask bits cleared */
gen_load_spr(ret, sprn);
tcg_gen_andi_tl(ret, ret, ~(spr_mask));
/* Apply the mask into 'gprn' in a temp var */
tcg_gen_andi_tl(t0, cpu_gpr[gprn], spr_mask);
/* Add the masked gprn bits into 'ret' */
tcg_gen_or_tl(ret, ret, t0);
tcg_temp_free(t0);
return ret;
}
target/ppc: add user read/write functions for MMCR0 Userspace need access to PMU SPRs to be able to operate the PMU. One of such SPRs is MMCR0. MMCR0, as defined by PowerISA v3.1, is classified as a 'group A' PMU register. This class of registers has common read/write rules that are governed by MMCR0 PMCC bits. MMCR0 is also not fully exposed to problem state: only MMCR0_FC, MMCR0_PMAO and MMCR0_PMAE bits are readable/writable in this case. This patch exposes MMCR0 to userspace by doing the following: - two new callbacks, spr_read_MMCR0_ureg() and spr_write_MMCR0_ureg(), are added to be used as problem state read/write callbacks of UMMCR0. Both callbacks filters the amount of bits userspace is able to read/write by using a MMCR0_UREG_MASK; - problem state access control is done by the spr_groupA_read_allowed() and spr_groupA_write_allowed() helpers. These helpers will read the current PMCC bits from DisasContext and check whether the read/write MMCR0 operation is valid or noti; - to avoid putting exclusive PMU logic into the already loaded translate.c file, let's create a new 'power8-pmu-regs.c.inc' file that will hold all the spr_read/spr_write functions of PMU registers. The 'power8' name of this new file intends to hint about the proven support of the PMU logic to be added. The code has been tested with the IBM POWER chip family, POWER8 being the oldest version tested. This doesn't mean that the PMU logic will break with any other PPC64 chip that implements Book3s, but rather that we can't assert that it works properly with any Book3s compliant chip. CC: Gustavo Romero <gustavo.romero@linaro.org> Signed-off-by: Gustavo Romero <gromero@linux.ibm.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-Id: <20211018010133.315842-3-danielhb413@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-10-18 04:01:20 +03:00
void spr_read_MMCR0_ureg(DisasContext *ctx, int gprn, int sprn)
{
TCGv t0;
if (!spr_groupA_read_allowed(ctx)) {
return;
}
t0 = tcg_temp_new();
/*
* Filter out all bits but FC, PMAO, and PMAE, according
* to ISA v3.1, in 10.4.4 Monitor Mode Control Register 0,
* fourth paragraph.
*/
gen_load_spr(t0, SPR_POWER_MMCR0);
tcg_gen_andi_tl(t0, t0, MMCR0_UREG_MASK);
tcg_gen_mov_tl(cpu_gpr[gprn], t0);
tcg_temp_free(t0);
}
void spr_write_MMCR0_ureg(DisasContext *ctx, int sprn, int gprn)
{
TCGv masked_gprn;
target/ppc: add user read/write functions for MMCR0 Userspace need access to PMU SPRs to be able to operate the PMU. One of such SPRs is MMCR0. MMCR0, as defined by PowerISA v3.1, is classified as a 'group A' PMU register. This class of registers has common read/write rules that are governed by MMCR0 PMCC bits. MMCR0 is also not fully exposed to problem state: only MMCR0_FC, MMCR0_PMAO and MMCR0_PMAE bits are readable/writable in this case. This patch exposes MMCR0 to userspace by doing the following: - two new callbacks, spr_read_MMCR0_ureg() and spr_write_MMCR0_ureg(), are added to be used as problem state read/write callbacks of UMMCR0. Both callbacks filters the amount of bits userspace is able to read/write by using a MMCR0_UREG_MASK; - problem state access control is done by the spr_groupA_read_allowed() and spr_groupA_write_allowed() helpers. These helpers will read the current PMCC bits from DisasContext and check whether the read/write MMCR0 operation is valid or noti; - to avoid putting exclusive PMU logic into the already loaded translate.c file, let's create a new 'power8-pmu-regs.c.inc' file that will hold all the spr_read/spr_write functions of PMU registers. The 'power8' name of this new file intends to hint about the proven support of the PMU logic to be added. The code has been tested with the IBM POWER chip family, POWER8 being the oldest version tested. This doesn't mean that the PMU logic will break with any other PPC64 chip that implements Book3s, but rather that we can't assert that it works properly with any Book3s compliant chip. CC: Gustavo Romero <gustavo.romero@linaro.org> Signed-off-by: Gustavo Romero <gromero@linux.ibm.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-Id: <20211018010133.315842-3-danielhb413@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-10-18 04:01:20 +03:00
if (!spr_groupA_write_allowed(ctx)) {
return;
}
/*
* Filter out all bits but FC, PMAO, and PMAE, according
* to ISA v3.1, in 10.4.4 Monitor Mode Control Register 0,
* fourth paragraph.
*/
masked_gprn = masked_gprn_for_spr_write(gprn, SPR_POWER_MMCR0,
MMCR0_UREG_MASK);
gen_store_spr(SPR_POWER_MMCR0, masked_gprn);
tcg_temp_free(masked_gprn);
}
void spr_read_MMCR2_ureg(DisasContext *ctx, int gprn, int sprn)
{
TCGv t0;
if (!spr_groupA_read_allowed(ctx)) {
return;
}
t0 = tcg_temp_new();
/*
* On read, filter out all bits that are not FCnP0 bits.
* When MMCR0[PMCC] is set to 0b10 or 0b11, providing
* problem state programs read/write access to MMCR2,
* only the FCnP0 bits can be accessed. All other bits are
* not changed when mtspr is executed in problem state, and
* all other bits return 0s when mfspr is executed in problem
* state, according to ISA v3.1, section 10.4.6 Monitor Mode
* Control Register 2, p. 1316, third paragraph.
*/
gen_load_spr(t0, SPR_POWER_MMCR2);
tcg_gen_andi_tl(t0, t0, MMCR2_UREG_MASK);
tcg_gen_mov_tl(cpu_gpr[gprn], t0);
target/ppc: add user read/write functions for MMCR0 Userspace need access to PMU SPRs to be able to operate the PMU. One of such SPRs is MMCR0. MMCR0, as defined by PowerISA v3.1, is classified as a 'group A' PMU register. This class of registers has common read/write rules that are governed by MMCR0 PMCC bits. MMCR0 is also not fully exposed to problem state: only MMCR0_FC, MMCR0_PMAO and MMCR0_PMAE bits are readable/writable in this case. This patch exposes MMCR0 to userspace by doing the following: - two new callbacks, spr_read_MMCR0_ureg() and spr_write_MMCR0_ureg(), are added to be used as problem state read/write callbacks of UMMCR0. Both callbacks filters the amount of bits userspace is able to read/write by using a MMCR0_UREG_MASK; - problem state access control is done by the spr_groupA_read_allowed() and spr_groupA_write_allowed() helpers. These helpers will read the current PMCC bits from DisasContext and check whether the read/write MMCR0 operation is valid or noti; - to avoid putting exclusive PMU logic into the already loaded translate.c file, let's create a new 'power8-pmu-regs.c.inc' file that will hold all the spr_read/spr_write functions of PMU registers. The 'power8' name of this new file intends to hint about the proven support of the PMU logic to be added. The code has been tested with the IBM POWER chip family, POWER8 being the oldest version tested. This doesn't mean that the PMU logic will break with any other PPC64 chip that implements Book3s, but rather that we can't assert that it works properly with any Book3s compliant chip. CC: Gustavo Romero <gustavo.romero@linaro.org> Signed-off-by: Gustavo Romero <gromero@linux.ibm.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-Id: <20211018010133.315842-3-danielhb413@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-10-18 04:01:20 +03:00
tcg_temp_free(t0);
}
void spr_write_MMCR2_ureg(DisasContext *ctx, int sprn, int gprn)
{
TCGv masked_gprn;
if (!spr_groupA_write_allowed(ctx)) {
return;
}
/*
* Filter the bits that can be written using MMCR2_UREG_MASK,
* similar to what is done in spr_write_MMCR0_ureg().
*/
masked_gprn = masked_gprn_for_spr_write(gprn, SPR_POWER_MMCR2,
MMCR2_UREG_MASK);
gen_store_spr(SPR_POWER_MMCR2, masked_gprn);
tcg_temp_free(masked_gprn);
target/ppc: add user read/write functions for MMCR0 Userspace need access to PMU SPRs to be able to operate the PMU. One of such SPRs is MMCR0. MMCR0, as defined by PowerISA v3.1, is classified as a 'group A' PMU register. This class of registers has common read/write rules that are governed by MMCR0 PMCC bits. MMCR0 is also not fully exposed to problem state: only MMCR0_FC, MMCR0_PMAO and MMCR0_PMAE bits are readable/writable in this case. This patch exposes MMCR0 to userspace by doing the following: - two new callbacks, spr_read_MMCR0_ureg() and spr_write_MMCR0_ureg(), are added to be used as problem state read/write callbacks of UMMCR0. Both callbacks filters the amount of bits userspace is able to read/write by using a MMCR0_UREG_MASK; - problem state access control is done by the spr_groupA_read_allowed() and spr_groupA_write_allowed() helpers. These helpers will read the current PMCC bits from DisasContext and check whether the read/write MMCR0 operation is valid or noti; - to avoid putting exclusive PMU logic into the already loaded translate.c file, let's create a new 'power8-pmu-regs.c.inc' file that will hold all the spr_read/spr_write functions of PMU registers. The 'power8' name of this new file intends to hint about the proven support of the PMU logic to be added. The code has been tested with the IBM POWER chip family, POWER8 being the oldest version tested. This doesn't mean that the PMU logic will break with any other PPC64 chip that implements Book3s, but rather that we can't assert that it works properly with any Book3s compliant chip. CC: Gustavo Romero <gustavo.romero@linaro.org> Signed-off-by: Gustavo Romero <gromero@linux.ibm.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-Id: <20211018010133.315842-3-danielhb413@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-10-18 04:01:20 +03:00
}
void spr_read_PMC14_ureg(DisasContext *ctx, int gprn, int sprn)
{
if (!spr_groupA_read_allowed(ctx)) {
return;
}
spr_read_ureg(ctx, gprn, sprn);
}
void spr_read_PMC56_ureg(DisasContext *ctx, int gprn, int sprn)
{
/*
* If PMCC = 0b11, PMC5 and PMC6 aren't included in the Performance
* Monitor, and a read attempt results in a Facility Unavailable
* Interrupt.
*/
if (ctx->mmcr0_pmcc0 && ctx->mmcr0_pmcc1) {
gen_hvpriv_exception(ctx, POWERPC_EXCP_FU);
return;
}
/* The remaining steps are similar to PMCs 1-4 userspace read */
spr_read_PMC14_ureg(ctx, gprn, sprn);
}
void spr_write_PMC14_ureg(DisasContext *ctx, int sprn, int gprn)
{
if (!spr_groupA_write_allowed(ctx)) {
return;
}
spr_write_ureg(ctx, sprn, gprn);
}
void spr_write_PMC56_ureg(DisasContext *ctx, int sprn, int gprn)
{
/*
* If PMCC = 0b11, PMC5 and PMC6 aren't included in the Performance
* Monitor, and a write attempt results in a Facility Unavailable
* Interrupt.
*/
if (ctx->mmcr0_pmcc0 && ctx->mmcr0_pmcc1) {
gen_hvpriv_exception(ctx, POWERPC_EXCP_FU);
return;
}
/* The remaining steps are similar to PMCs 1-4 userspace write */
spr_write_PMC14_ureg(ctx, sprn, gprn);
}
target/ppc: add user read/write functions for MMCR0 Userspace need access to PMU SPRs to be able to operate the PMU. One of such SPRs is MMCR0. MMCR0, as defined by PowerISA v3.1, is classified as a 'group A' PMU register. This class of registers has common read/write rules that are governed by MMCR0 PMCC bits. MMCR0 is also not fully exposed to problem state: only MMCR0_FC, MMCR0_PMAO and MMCR0_PMAE bits are readable/writable in this case. This patch exposes MMCR0 to userspace by doing the following: - two new callbacks, spr_read_MMCR0_ureg() and spr_write_MMCR0_ureg(), are added to be used as problem state read/write callbacks of UMMCR0. Both callbacks filters the amount of bits userspace is able to read/write by using a MMCR0_UREG_MASK; - problem state access control is done by the spr_groupA_read_allowed() and spr_groupA_write_allowed() helpers. These helpers will read the current PMCC bits from DisasContext and check whether the read/write MMCR0 operation is valid or noti; - to avoid putting exclusive PMU logic into the already loaded translate.c file, let's create a new 'power8-pmu-regs.c.inc' file that will hold all the spr_read/spr_write functions of PMU registers. The 'power8' name of this new file intends to hint about the proven support of the PMU logic to be added. The code has been tested with the IBM POWER chip family, POWER8 being the oldest version tested. This doesn't mean that the PMU logic will break with any other PPC64 chip that implements Book3s, but rather that we can't assert that it works properly with any Book3s compliant chip. CC: Gustavo Romero <gustavo.romero@linaro.org> Signed-off-by: Gustavo Romero <gromero@linux.ibm.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-Id: <20211018010133.315842-3-danielhb413@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-10-18 04:01:20 +03:00
#else
void spr_read_MMCR0_ureg(DisasContext *ctx, int gprn, int sprn)
{
spr_read_ureg(ctx, gprn, sprn);
}
void spr_write_MMCR0_ureg(DisasContext *ctx, int sprn, int gprn)
{
spr_noaccess(ctx, gprn, sprn);
}
void spr_read_MMCR2_ureg(DisasContext *ctx, int gprn, int sprn)
{
spr_read_ureg(ctx, gprn, sprn);
}
void spr_write_MMCR2_ureg(DisasContext *ctx, int sprn, int gprn)
{
spr_noaccess(ctx, gprn, sprn);
}
void spr_read_PMC14_ureg(DisasContext *ctx, int gprn, int sprn)
{
spr_read_ureg(ctx, gprn, sprn);
}
void spr_read_PMC56_ureg(DisasContext *ctx, int gprn, int sprn)
{
spr_read_ureg(ctx, gprn, sprn);
}
void spr_write_PMC14_ureg(DisasContext *ctx, int sprn, int gprn)
{
spr_noaccess(ctx, gprn, sprn);
}
void spr_write_PMC56_ureg(DisasContext *ctx, int sprn, int gprn)
{
spr_noaccess(ctx, gprn, sprn);
}
target/ppc: add user read/write functions for MMCR0 Userspace need access to PMU SPRs to be able to operate the PMU. One of such SPRs is MMCR0. MMCR0, as defined by PowerISA v3.1, is classified as a 'group A' PMU register. This class of registers has common read/write rules that are governed by MMCR0 PMCC bits. MMCR0 is also not fully exposed to problem state: only MMCR0_FC, MMCR0_PMAO and MMCR0_PMAE bits are readable/writable in this case. This patch exposes MMCR0 to userspace by doing the following: - two new callbacks, spr_read_MMCR0_ureg() and spr_write_MMCR0_ureg(), are added to be used as problem state read/write callbacks of UMMCR0. Both callbacks filters the amount of bits userspace is able to read/write by using a MMCR0_UREG_MASK; - problem state access control is done by the spr_groupA_read_allowed() and spr_groupA_write_allowed() helpers. These helpers will read the current PMCC bits from DisasContext and check whether the read/write MMCR0 operation is valid or noti; - to avoid putting exclusive PMU logic into the already loaded translate.c file, let's create a new 'power8-pmu-regs.c.inc' file that will hold all the spr_read/spr_write functions of PMU registers. The 'power8' name of this new file intends to hint about the proven support of the PMU logic to be added. The code has been tested with the IBM POWER chip family, POWER8 being the oldest version tested. This doesn't mean that the PMU logic will break with any other PPC64 chip that implements Book3s, but rather that we can't assert that it works properly with any Book3s compliant chip. CC: Gustavo Romero <gustavo.romero@linaro.org> Signed-off-by: Gustavo Romero <gromero@linux.ibm.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-Id: <20211018010133.315842-3-danielhb413@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-10-18 04:01:20 +03:00
#endif /* defined(TARGET_PPC64) && !defined(CONFIG_USER_ONLY) */