qemu/hw/intc/arm_gicv3_its.c

1483 lines
46 KiB
C
Raw Normal View History

/*
* ITS emulation for a GICv3-based system
*
* Copyright Linaro.org 2021
*
* Authors:
* Shashi Mallela <shashi.mallela@linaro.org>
*
* This work is licensed under the terms of the GNU GPL, version 2 or (at your
* option) any later version. See the COPYING file in the top-level directory.
*
*/
#include "qemu/osdep.h"
#include "qemu/log.h"
#include "trace.h"
#include "hw/qdev-properties.h"
#include "hw/intc/arm_gicv3_its_common.h"
#include "gicv3_internal.h"
#include "qom/object.h"
#include "qapi/error.h"
typedef struct GICv3ITSClass GICv3ITSClass;
/* This is reusing the GICv3ITSState typedef from ARM_GICV3_ITS_COMMON */
DECLARE_OBJ_CHECKERS(GICv3ITSState, GICv3ITSClass,
ARM_GICV3_ITS, TYPE_ARM_GICV3_ITS)
struct GICv3ITSClass {
GICv3ITSCommonClass parent_class;
void (*parent_reset)(DeviceState *dev);
};
/*
* This is an internal enum used to distinguish between LPI triggered
* via command queue and LPI triggered via gits_translater write.
*/
typedef enum ItsCmdType {
NONE = 0, /* internal indication for GITS_TRANSLATER write */
CLEAR = 1,
DISCARD = 2,
INTERRUPT = 3,
} ItsCmdType;
typedef struct DTEntry {
bool valid;
unsigned size;
uint64_t ittaddr;
} DTEntry;
typedef struct CTEntry {
bool valid;
uint32_t rdbase;
} CTEntry;
typedef struct ITEntry {
bool valid;
int inttype;
uint32_t intid;
uint32_t doorbell;
uint32_t icid;
uint32_t vpeid;
} ITEntry;
hw/intc/arm_gicv3_its: Use enum for return value of process_* functions When an ITS detects an error in a command, it has an implementation-defined (CONSTRAINED UNPREDICTABLE) choice of whether to ignore the command, proceeding to the next one in the queue, or to stall the ITS command queue, processing nothing further. The behaviour required when the read of the command packet from memory fails is less clearly documented, but the same set of choices as for command errors seem reasonable. The intention of the QEMU implementation, as documented in the comments, is that if we encounter a memory error reading the command packet or one of the various data tables then we should stall, but for command parameter errors we should ignore the queue and continue. However, we don't actually do this. To get the desired behaviour, the various process_* functions need to return true to cause process_cmdq() to advance to the next command and keep processing, and false to stall command processing. What they mostly do is return false for any kind of error. To make the code clearer, replace the 'bool' return from the process_ functions with an enum which may be either CMD_STALL or CMD_CONTINUE. In this commit no behaviour changes; in subsequent commits we will adjust the error-return paths for the process_ functions one by one. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20220111171048.3545974-6-peter.maydell@linaro.org
2022-01-11 20:10:40 +03:00
/*
* The ITS spec permits a range of CONSTRAINED UNPREDICTABLE options
* if a command parameter is not correct. These include both "stall
* processing of the command queue" and "ignore this command, and
* keep processing the queue". In our implementation we choose that
* memory transaction errors reading the command packet provoke a
* stall, but errors in parameters cause us to ignore the command
* and continue processing.
* The process_* functions which handle individual ITS commands all
* return an ItsCmdResult which tells process_cmdq() whether it should
* stall or keep going.
*/
typedef enum ItsCmdResult {
CMD_STALL = 0,
CMD_CONTINUE = 1,
} ItsCmdResult;
static uint64_t baser_base_addr(uint64_t value, uint32_t page_sz)
{
uint64_t result = 0;
switch (page_sz) {
case GITS_PAGE_SIZE_4K:
case GITS_PAGE_SIZE_16K:
result = FIELD_EX64(value, GITS_BASER, PHYADDR) << 12;
break;
case GITS_PAGE_SIZE_64K:
result = FIELD_EX64(value, GITS_BASER, PHYADDRL_64K) << 16;
result |= FIELD_EX64(value, GITS_BASER, PHYADDRH_64K) << 48;
break;
default:
break;
}
return result;
}
static uint64_t table_entry_addr(GICv3ITSState *s, TableDesc *td,
uint32_t idx, MemTxResult *res)
{
/*
* Given a TableDesc describing one of the ITS in-guest-memory
* tables and an index into it, return the guest address
* corresponding to that table entry.
* If there was a memory error reading the L1 table of an
* indirect table, *res is set accordingly, and we return -1.
* If the L1 table entry is marked not valid, we return -1 with
* *res set to MEMTX_OK.
*
* The specification defines the format of level 1 entries of a
* 2-level table, but the format of level 2 entries and the format
* of flat-mapped tables is IMPDEF.
*/
AddressSpace *as = &s->gicv3->dma_as;
uint32_t l2idx;
uint64_t l2;
uint32_t num_l2_entries;
*res = MEMTX_OK;
if (!td->indirect) {
/* Single level table */
return td->base_addr + idx * td->entry_sz;
}
/* Two level table */
l2idx = idx / (td->page_sz / L1TABLE_ENTRY_SIZE);
l2 = address_space_ldq_le(as,
td->base_addr + (l2idx * L1TABLE_ENTRY_SIZE),
MEMTXATTRS_UNSPECIFIED, res);
if (*res != MEMTX_OK) {
return -1;
}
if (!(l2 & L2_TABLE_VALID_MASK)) {
return -1;
}
num_l2_entries = td->page_sz / td->entry_sz;
return (l2 & ((1ULL << 51) - 1)) + (idx % num_l2_entries) * td->entry_sz;
}
/*
* Read the Collection Table entry at index @icid. On success (including
* successfully determining that there is no valid CTE for this index),
* we return MEMTX_OK and populate the CTEntry struct @cte accordingly.
* If there is an error reading memory then we return the error code.
*/
static MemTxResult get_cte(GICv3ITSState *s, uint16_t icid, CTEntry *cte)
{
AddressSpace *as = &s->gicv3->dma_as;
MemTxResult res = MEMTX_OK;
uint64_t entry_addr = table_entry_addr(s, &s->ct, icid, &res);
uint64_t cteval;
if (entry_addr == -1) {
/* No L2 table entry, i.e. no valid CTE, or a memory error */
cte->valid = false;
goto out;
}
cteval = address_space_ldq_le(as, entry_addr, MEMTXATTRS_UNSPECIFIED, &res);
if (res != MEMTX_OK) {
goto out;
}
cte->valid = FIELD_EX64(cteval, CTE, VALID);
cte->rdbase = FIELD_EX64(cteval, CTE, RDBASE);
out:
if (res != MEMTX_OK) {
trace_gicv3_its_cte_read_fault(icid);
} else {
trace_gicv3_its_cte_read(icid, cte->valid, cte->rdbase);
}
return res;
}
/*
* Update the Interrupt Table entry at index @evinted in the table specified
* by the dte @dte. Returns true on success, false if there was a memory
* access error.
*/
static bool update_ite(GICv3ITSState *s, uint32_t eventid, const DTEntry *dte,
const ITEntry *ite)
{
AddressSpace *as = &s->gicv3->dma_as;
MemTxResult res = MEMTX_OK;
hwaddr iteaddr = dte->ittaddr + eventid * ITS_ITT_ENTRY_SIZE;
uint64_t itel = 0;
uint32_t iteh = 0;
trace_gicv3_its_ite_write(dte->ittaddr, eventid, ite->valid,
ite->inttype, ite->intid, ite->icid,
ite->vpeid, ite->doorbell);
if (ite->valid) {
itel = FIELD_DP64(itel, ITE_L, VALID, 1);
itel = FIELD_DP64(itel, ITE_L, INTTYPE, ite->inttype);
itel = FIELD_DP64(itel, ITE_L, INTID, ite->intid);
itel = FIELD_DP64(itel, ITE_L, ICID, ite->icid);
itel = FIELD_DP64(itel, ITE_L, VPEID, ite->vpeid);
iteh = FIELD_DP32(iteh, ITE_H, DOORBELL, ite->doorbell);
}
address_space_stq_le(as, iteaddr, itel, MEMTXATTRS_UNSPECIFIED, &res);
if (res != MEMTX_OK) {
return false;
}
address_space_stl_le(as, iteaddr + 8, iteh, MEMTXATTRS_UNSPECIFIED, &res);
return res == MEMTX_OK;
}
/*
* Read the Interrupt Table entry at index @eventid from the table specified
* by the DTE @dte. On success, we return MEMTX_OK and populate the ITEntry
* struct @ite accordingly. If there is an error reading memory then we return
* the error code.
*/
static MemTxResult get_ite(GICv3ITSState *s, uint32_t eventid,
const DTEntry *dte, ITEntry *ite)
{
AddressSpace *as = &s->gicv3->dma_as;
MemTxResult res = MEMTX_OK;
uint64_t itel;
uint32_t iteh;
hwaddr iteaddr = dte->ittaddr + eventid * ITS_ITT_ENTRY_SIZE;
itel = address_space_ldq_le(as, iteaddr, MEMTXATTRS_UNSPECIFIED, &res);
if (res != MEMTX_OK) {
trace_gicv3_its_ite_read_fault(dte->ittaddr, eventid);
return res;
}
iteh = address_space_ldl_le(as, iteaddr + 8, MEMTXATTRS_UNSPECIFIED, &res);
if (res != MEMTX_OK) {
trace_gicv3_its_ite_read_fault(dte->ittaddr, eventid);
return res;
}
ite->valid = FIELD_EX64(itel, ITE_L, VALID);
ite->inttype = FIELD_EX64(itel, ITE_L, INTTYPE);
ite->intid = FIELD_EX64(itel, ITE_L, INTID);
ite->icid = FIELD_EX64(itel, ITE_L, ICID);
ite->vpeid = FIELD_EX64(itel, ITE_L, VPEID);
ite->doorbell = FIELD_EX64(iteh, ITE_H, DOORBELL);
trace_gicv3_its_ite_read(dte->ittaddr, eventid, ite->valid,
ite->inttype, ite->intid, ite->icid,
ite->vpeid, ite->doorbell);
return MEMTX_OK;
}
/*
* Read the Device Table entry at index @devid. On success (including
* successfully determining that there is no valid DTE for this index),
* we return MEMTX_OK and populate the DTEntry struct accordingly.
* If there is an error reading memory then we return the error code.
*/
static MemTxResult get_dte(GICv3ITSState *s, uint32_t devid, DTEntry *dte)
{
MemTxResult res = MEMTX_OK;
AddressSpace *as = &s->gicv3->dma_as;
uint64_t entry_addr = table_entry_addr(s, &s->dt, devid, &res);
uint64_t dteval;
if (entry_addr == -1) {
/* No L2 table entry, i.e. no valid DTE, or a memory error */
dte->valid = false;
goto out;
}
dteval = address_space_ldq_le(as, entry_addr, MEMTXATTRS_UNSPECIFIED, &res);
if (res != MEMTX_OK) {
goto out;
}
dte->valid = FIELD_EX64(dteval, DTE, VALID);
dte->size = FIELD_EX64(dteval, DTE, SIZE);
/* DTE word field stores bits [51:8] of the ITT address */
dte->ittaddr = FIELD_EX64(dteval, DTE, ITTADDR) << ITTADDR_SHIFT;
out:
if (res != MEMTX_OK) {
trace_gicv3_its_dte_read_fault(devid);
} else {
trace_gicv3_its_dte_read(devid, dte->valid, dte->size, dte->ittaddr);
}
return res;
}
/*
* This function handles the processing of following commands based on
* the ItsCmdType parameter passed:-
* 1. triggering of lpi interrupt translation via ITS INT command
* 2. triggering of lpi interrupt translation via gits_translater register
* 3. handling of ITS CLEAR command
* 4. handling of ITS DISCARD command
*/
static ItsCmdResult do_process_its_cmd(GICv3ITSState *s, uint32_t devid,
uint32_t eventid, ItsCmdType cmd)
{
uint64_t num_eventids;
DTEntry dte;
CTEntry cte;
ITEntry ite;
if (devid >= s->dt.num_entries) {
qemu_log_mask(LOG_GUEST_ERROR,
"%s: invalid command attributes: devid %d>=%d",
__func__, devid, s->dt.num_entries);
return CMD_CONTINUE;
}
if (get_dte(s, devid, &dte) != MEMTX_OK) {
return CMD_STALL;
}
if (!dte.valid) {
qemu_log_mask(LOG_GUEST_ERROR,
"%s: invalid command attributes: "
"invalid dte for %d\n", __func__, devid);
return CMD_CONTINUE;
}
num_eventids = 1ULL << (dte.size + 1);
if (eventid >= num_eventids) {
qemu_log_mask(LOG_GUEST_ERROR,
"%s: invalid command attributes: eventid %d >= %"
PRId64 "\n",
__func__, eventid, num_eventids);
return CMD_CONTINUE;
}
if (get_ite(s, eventid, &dte, &ite) != MEMTX_OK) {
return CMD_STALL;
}
if (!ite.valid || ite.inttype != ITE_INTTYPE_PHYSICAL) {
qemu_log_mask(LOG_GUEST_ERROR,
"%s: invalid command attributes: invalid ITE\n",
__func__);
return CMD_CONTINUE;
}
if (ite.icid >= s->ct.num_entries) {
qemu_log_mask(LOG_GUEST_ERROR,
"%s: invalid ICID 0x%x in ITE (table corrupted?)\n",
__func__, ite.icid);
return CMD_CONTINUE;
}
if (get_cte(s, ite.icid, &cte) != MEMTX_OK) {
return CMD_STALL;
}
if (!cte.valid) {
qemu_log_mask(LOG_GUEST_ERROR,
"%s: invalid command attributes: invalid CTE\n",
__func__);
return CMD_CONTINUE;
}
/*
* Current implementation only supports rdbase == procnum
* Hence rdbase physical address is ignored
*/
if (cte.rdbase >= s->gicv3->num_cpu) {
return CMD_CONTINUE;
}
if ((cmd == CLEAR) || (cmd == DISCARD)) {
gicv3_redist_process_lpi(&s->gicv3->cpu[cte.rdbase], ite.intid, 0);
} else {
gicv3_redist_process_lpi(&s->gicv3->cpu[cte.rdbase], ite.intid, 1);
}
if (cmd == DISCARD) {
ITEntry ite = {};
/* remove mapping from interrupt translation table */
ite.valid = false;
return update_ite(s, eventid, &dte, &ite) ? CMD_CONTINUE : CMD_STALL;
}
return CMD_CONTINUE;
}
static ItsCmdResult process_its_cmd(GICv3ITSState *s, const uint64_t *cmdpkt,
ItsCmdType cmd)
{
uint32_t devid, eventid;
devid = (cmdpkt[0] & DEVID_MASK) >> DEVID_SHIFT;
eventid = cmdpkt[1] & EVENTID_MASK;
switch (cmd) {
case INTERRUPT:
trace_gicv3_its_cmd_int(devid, eventid);
break;
case CLEAR:
trace_gicv3_its_cmd_clear(devid, eventid);
break;
case DISCARD:
trace_gicv3_its_cmd_discard(devid, eventid);
break;
default:
g_assert_not_reached();
}
return do_process_its_cmd(s, devid, eventid, cmd);
}
static ItsCmdResult process_mapti(GICv3ITSState *s, const uint64_t *cmdpkt,
bool ignore_pInt)
{
uint32_t devid, eventid;
uint32_t pIntid = 0;
uint64_t num_eventids;
uint32_t num_intids;
uint16_t icid = 0;
DTEntry dte;
ITEntry ite;
devid = (cmdpkt[0] & DEVID_MASK) >> DEVID_SHIFT;
eventid = cmdpkt[1] & EVENTID_MASK;
icid = cmdpkt[2] & ICID_MASK;
if (ignore_pInt) {
pIntid = eventid;
trace_gicv3_its_cmd_mapi(devid, eventid, icid);
} else {
pIntid = (cmdpkt[1] & pINTID_MASK) >> pINTID_SHIFT;
trace_gicv3_its_cmd_mapti(devid, eventid, icid, pIntid);
}
if (devid >= s->dt.num_entries) {
qemu_log_mask(LOG_GUEST_ERROR,
"%s: invalid command attributes: devid %d>=%d",
__func__, devid, s->dt.num_entries);
return CMD_CONTINUE;
}
if (get_dte(s, devid, &dte) != MEMTX_OK) {
return CMD_STALL;
}
num_eventids = 1ULL << (dte.size + 1);
num_intids = 1ULL << (GICD_TYPER_IDBITS + 1);
if (icid >= s->ct.num_entries) {
qemu_log_mask(LOG_GUEST_ERROR,
"%s: invalid ICID 0x%x >= 0x%x\n",
__func__, icid, s->ct.num_entries);
return CMD_CONTINUE;
}
if (!dte.valid) {
qemu_log_mask(LOG_GUEST_ERROR,
"%s: no valid DTE for devid 0x%x\n", __func__, devid);
return CMD_CONTINUE;
}
if (eventid >= num_eventids) {
qemu_log_mask(LOG_GUEST_ERROR,
"%s: invalid event ID 0x%x >= 0x%" PRIx64 "\n",
__func__, eventid, num_eventids);
return CMD_CONTINUE;
}
if (pIntid < GICV3_LPI_INTID_START || pIntid >= num_intids) {
qemu_log_mask(LOG_GUEST_ERROR,
"%s: invalid interrupt ID 0x%x\n", __func__, pIntid);
return CMD_CONTINUE;
}
/* add ite entry to interrupt translation table */
ite.valid = true;
ite.inttype = ITE_INTTYPE_PHYSICAL;
ite.intid = pIntid;
ite.icid = icid;
ite.doorbell = INTID_SPURIOUS;
ite.vpeid = 0;
return update_ite(s, eventid, &dte, &ite) ? CMD_CONTINUE : CMD_STALL;
}
/*
* Update the Collection Table entry for @icid to @cte. Returns true
* on success, false if there was a memory access error.
*/
static bool update_cte(GICv3ITSState *s, uint16_t icid, const CTEntry *cte)
{
AddressSpace *as = &s->gicv3->dma_as;
uint64_t entry_addr;
uint64_t cteval = 0;
MemTxResult res = MEMTX_OK;
trace_gicv3_its_cte_write(icid, cte->valid, cte->rdbase);
if (cte->valid) {
/* add mapping entry to collection table */
cteval = FIELD_DP64(cteval, CTE, VALID, 1);
cteval = FIELD_DP64(cteval, CTE, RDBASE, cte->rdbase);
}
entry_addr = table_entry_addr(s, &s->ct, icid, &res);
if (res != MEMTX_OK) {
/* memory access error: stall */
return false;
}
if (entry_addr == -1) {
/* No L2 table for this index: discard write and continue */
return true;
}
address_space_stq_le(as, entry_addr, cteval, MEMTXATTRS_UNSPECIFIED, &res);
return res == MEMTX_OK;
}
static ItsCmdResult process_mapc(GICv3ITSState *s, const uint64_t *cmdpkt)
{
uint16_t icid;
CTEntry cte;
icid = cmdpkt[2] & ICID_MASK;
cte.valid = cmdpkt[2] & CMD_FIELD_VALID_MASK;
if (cte.valid) {
cte.rdbase = (cmdpkt[2] & R_MAPC_RDBASE_MASK) >> R_MAPC_RDBASE_SHIFT;
cte.rdbase &= RDBASE_PROCNUM_MASK;
} else {
cte.rdbase = 0;
}
trace_gicv3_its_cmd_mapc(icid, cte.rdbase, cte.valid);
if (icid >= s->ct.num_entries) {
qemu_log_mask(LOG_GUEST_ERROR, "ITS MAPC: invalid ICID 0x%x\n", icid);
return CMD_CONTINUE;
}
if (cte.valid && cte.rdbase >= s->gicv3->num_cpu) {
qemu_log_mask(LOG_GUEST_ERROR,
"ITS MAPC: invalid RDBASE %u\n", cte.rdbase);
return CMD_CONTINUE;
}
return update_cte(s, icid, &cte) ? CMD_CONTINUE : CMD_STALL;
}
/*
* Update the Device Table entry for @devid to @dte. Returns true
* on success, false if there was a memory access error.
*/
static bool update_dte(GICv3ITSState *s, uint32_t devid, const DTEntry *dte)
{
AddressSpace *as = &s->gicv3->dma_as;
uint64_t entry_addr;
uint64_t dteval = 0;
MemTxResult res = MEMTX_OK;
trace_gicv3_its_dte_write(devid, dte->valid, dte->size, dte->ittaddr);
if (dte->valid) {
/* add mapping entry to device table */
dteval = FIELD_DP64(dteval, DTE, VALID, 1);
dteval = FIELD_DP64(dteval, DTE, SIZE, dte->size);
dteval = FIELD_DP64(dteval, DTE, ITTADDR, dte->ittaddr);
}
entry_addr = table_entry_addr(s, &s->dt, devid, &res);
if (res != MEMTX_OK) {
/* memory access error: stall */
return false;
}
if (entry_addr == -1) {
/* No L2 table for this index: discard write and continue */
return true;
}
address_space_stq_le(as, entry_addr, dteval, MEMTXATTRS_UNSPECIFIED, &res);
return res == MEMTX_OK;
}
static ItsCmdResult process_mapd(GICv3ITSState *s, const uint64_t *cmdpkt)
{
uint32_t devid;
DTEntry dte;
devid = (cmdpkt[0] & DEVID_MASK) >> DEVID_SHIFT;
dte.size = cmdpkt[1] & SIZE_MASK;
dte.ittaddr = (cmdpkt[2] & ITTADDR_MASK) >> ITTADDR_SHIFT;
dte.valid = cmdpkt[2] & CMD_FIELD_VALID_MASK;
trace_gicv3_its_cmd_mapd(devid, dte.size, dte.ittaddr, dte.valid);
if (devid >= s->dt.num_entries) {
qemu_log_mask(LOG_GUEST_ERROR,
"ITS MAPD: invalid device ID field 0x%x >= 0x%x\n",
devid, s->dt.num_entries);
return CMD_CONTINUE;
}
if (dte.size > FIELD_EX64(s->typer, GITS_TYPER, IDBITS)) {
qemu_log_mask(LOG_GUEST_ERROR,
"ITS MAPD: invalid size %d\n", dte.size);
return CMD_CONTINUE;
}
return update_dte(s, devid, &dte) ? CMD_CONTINUE : CMD_STALL;
}
static ItsCmdResult process_movall(GICv3ITSState *s, const uint64_t *cmdpkt)
{
uint64_t rd1, rd2;
rd1 = FIELD_EX64(cmdpkt[2], MOVALL_2, RDBASE1);
rd2 = FIELD_EX64(cmdpkt[3], MOVALL_3, RDBASE2);
trace_gicv3_its_cmd_movall(rd1, rd2);
if (rd1 >= s->gicv3->num_cpu) {
qemu_log_mask(LOG_GUEST_ERROR,
"%s: RDBASE1 %" PRId64
" out of range (must be less than %d)\n",
__func__, rd1, s->gicv3->num_cpu);
return CMD_CONTINUE;
}
if (rd2 >= s->gicv3->num_cpu) {
qemu_log_mask(LOG_GUEST_ERROR,
"%s: RDBASE2 %" PRId64
" out of range (must be less than %d)\n",
__func__, rd2, s->gicv3->num_cpu);
return CMD_CONTINUE;
}
if (rd1 == rd2) {
/* Move to same target must succeed as a no-op */
return CMD_CONTINUE;
}
/* Move all pending LPIs from redistributor 1 to redistributor 2 */
gicv3_redist_movall_lpis(&s->gicv3->cpu[rd1], &s->gicv3->cpu[rd2]);
return CMD_CONTINUE;
}
static ItsCmdResult process_movi(GICv3ITSState *s, const uint64_t *cmdpkt)
{
uint32_t devid, eventid;
uint16_t new_icid;
uint64_t num_eventids;
DTEntry dte;
CTEntry old_cte, new_cte;
ITEntry old_ite;
devid = FIELD_EX64(cmdpkt[0], MOVI_0, DEVICEID);
eventid = FIELD_EX64(cmdpkt[1], MOVI_1, EVENTID);
new_icid = FIELD_EX64(cmdpkt[2], MOVI_2, ICID);
trace_gicv3_its_cmd_movi(devid, eventid, new_icid);
if (devid >= s->dt.num_entries) {
qemu_log_mask(LOG_GUEST_ERROR,
"%s: invalid command attributes: devid %d>=%d",
__func__, devid, s->dt.num_entries);
return CMD_CONTINUE;
}
if (get_dte(s, devid, &dte) != MEMTX_OK) {
return CMD_STALL;
}
if (!dte.valid) {
qemu_log_mask(LOG_GUEST_ERROR,
"%s: invalid command attributes: "
"invalid dte for %d\n", __func__, devid);
return CMD_CONTINUE;
}
num_eventids = 1ULL << (dte.size + 1);
if (eventid >= num_eventids) {
qemu_log_mask(LOG_GUEST_ERROR,
"%s: invalid command attributes: eventid %d >= %"
PRId64 "\n",
__func__, eventid, num_eventids);
return CMD_CONTINUE;
}
if (get_ite(s, eventid, &dte, &old_ite) != MEMTX_OK) {
return CMD_STALL;
}
if (!old_ite.valid || old_ite.inttype != ITE_INTTYPE_PHYSICAL) {
qemu_log_mask(LOG_GUEST_ERROR,
"%s: invalid command attributes: invalid ITE\n",
__func__);
return CMD_CONTINUE;
}
if (old_ite.icid >= s->ct.num_entries) {
qemu_log_mask(LOG_GUEST_ERROR,
"%s: invalid ICID 0x%x in ITE (table corrupted?)\n",
__func__, old_ite.icid);
return CMD_CONTINUE;
}
if (new_icid >= s->ct.num_entries) {
qemu_log_mask(LOG_GUEST_ERROR,
"%s: invalid command attributes: ICID 0x%x\n",
__func__, new_icid);
return CMD_CONTINUE;
}
if (get_cte(s, old_ite.icid, &old_cte) != MEMTX_OK) {
return CMD_STALL;
}
if (!old_cte.valid) {
qemu_log_mask(LOG_GUEST_ERROR,
"%s: invalid command attributes: "
"invalid CTE for old ICID 0x%x\n",
__func__, old_ite.icid);
return CMD_CONTINUE;
}
if (get_cte(s, new_icid, &new_cte) != MEMTX_OK) {
return CMD_STALL;
}
if (!new_cte.valid) {
qemu_log_mask(LOG_GUEST_ERROR,
"%s: invalid command attributes: "
"invalid CTE for new ICID 0x%x\n",
__func__, new_icid);
return CMD_CONTINUE;
}
if (old_cte.rdbase >= s->gicv3->num_cpu) {
qemu_log_mask(LOG_GUEST_ERROR,
"%s: CTE has invalid rdbase 0x%x\n",
__func__, old_cte.rdbase);
return CMD_CONTINUE;
}
if (new_cte.rdbase >= s->gicv3->num_cpu) {
qemu_log_mask(LOG_GUEST_ERROR,
"%s: CTE has invalid rdbase 0x%x\n",
__func__, new_cte.rdbase);
return CMD_CONTINUE;
}
if (old_cte.rdbase != new_cte.rdbase) {
/* Move the LPI from the old redistributor to the new one */
gicv3_redist_mov_lpi(&s->gicv3->cpu[old_cte.rdbase],
&s->gicv3->cpu[new_cte.rdbase],
old_ite.intid);
}
/* Update the ICID field in the interrupt translation table entry */
old_ite.icid = new_icid;
return update_ite(s, eventid, &dte, &old_ite) ? CMD_CONTINUE : CMD_STALL;
}
/*
* Current implementation blocks until all
* commands are processed
*/
static void process_cmdq(GICv3ITSState *s)
{
uint32_t wr_offset = 0;
uint32_t rd_offset = 0;
uint32_t cq_offset = 0;
AddressSpace *as = &s->gicv3->dma_as;
uint8_t cmd;
int i;
if (!(s->ctlr & R_GITS_CTLR_ENABLED_MASK)) {
return;
}
wr_offset = FIELD_EX64(s->cwriter, GITS_CWRITER, OFFSET);
hw/intc/arm_gicv3_its: Fix various off-by-one errors The ITS code has to check whether various parameters passed in commands are in-bounds, where the limit is defined in terms of the number of bits that are available for the parameter. (For example, the GITS_TYPER.Devbits ID register field specifies the number of DeviceID bits minus 1, and device IDs passed in the MAPTI and MAPD command packets must fit in that many bits.) Currently we have off-by-one bugs in many of these bounds checks. The typical problem is that we define a max_foo as 1 << n. In the Devbits example, we set s->dt.max_ids = 1UL << (GITS_TYPER.Devbits + 1). However later when we do the bounds check we write if (devid > s->dt.max_ids) { /* command error */ } which incorrectly permits a devid of 1 << n. These bugs will not cause QEMU crashes because the ID values being checked are only used for accesses into tables held in guest memory which we access with address_space_*() functions, but they are incorrect behaviour of our emulation. Fix them by standardizing on this pattern: * bounds limits are named num_foos and are the 2^n value (equal to the number of valid foo values) * bounds checks are either if (fooid < num_foos) { good } or if (fooid >= num_foos) { bad } In this commit we fix the handling of the number of IDs in the device table and the collection table, and the number of commands that will fit in the command queue. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2022-01-07 20:08:00 +03:00
if (wr_offset >= s->cq.num_entries) {
qemu_log_mask(LOG_GUEST_ERROR,
"%s: invalid write offset "
"%d\n", __func__, wr_offset);
return;
}
rd_offset = FIELD_EX64(s->creadr, GITS_CREADR, OFFSET);
hw/intc/arm_gicv3_its: Fix various off-by-one errors The ITS code has to check whether various parameters passed in commands are in-bounds, where the limit is defined in terms of the number of bits that are available for the parameter. (For example, the GITS_TYPER.Devbits ID register field specifies the number of DeviceID bits minus 1, and device IDs passed in the MAPTI and MAPD command packets must fit in that many bits.) Currently we have off-by-one bugs in many of these bounds checks. The typical problem is that we define a max_foo as 1 << n. In the Devbits example, we set s->dt.max_ids = 1UL << (GITS_TYPER.Devbits + 1). However later when we do the bounds check we write if (devid > s->dt.max_ids) { /* command error */ } which incorrectly permits a devid of 1 << n. These bugs will not cause QEMU crashes because the ID values being checked are only used for accesses into tables held in guest memory which we access with address_space_*() functions, but they are incorrect behaviour of our emulation. Fix them by standardizing on this pattern: * bounds limits are named num_foos and are the 2^n value (equal to the number of valid foo values) * bounds checks are either if (fooid < num_foos) { good } or if (fooid >= num_foos) { bad } In this commit we fix the handling of the number of IDs in the device table and the collection table, and the number of commands that will fit in the command queue. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2022-01-07 20:08:00 +03:00
if (rd_offset >= s->cq.num_entries) {
qemu_log_mask(LOG_GUEST_ERROR,
"%s: invalid read offset "
"%d\n", __func__, rd_offset);
return;
}
while (wr_offset != rd_offset) {
hw/intc/arm_gicv3_its: Use enum for return value of process_* functions When an ITS detects an error in a command, it has an implementation-defined (CONSTRAINED UNPREDICTABLE) choice of whether to ignore the command, proceeding to the next one in the queue, or to stall the ITS command queue, processing nothing further. The behaviour required when the read of the command packet from memory fails is less clearly documented, but the same set of choices as for command errors seem reasonable. The intention of the QEMU implementation, as documented in the comments, is that if we encounter a memory error reading the command packet or one of the various data tables then we should stall, but for command parameter errors we should ignore the queue and continue. However, we don't actually do this. To get the desired behaviour, the various process_* functions need to return true to cause process_cmdq() to advance to the next command and keep processing, and false to stall command processing. What they mostly do is return false for any kind of error. To make the code clearer, replace the 'bool' return from the process_ functions with an enum which may be either CMD_STALL or CMD_CONTINUE. In this commit no behaviour changes; in subsequent commits we will adjust the error-return paths for the process_ functions one by one. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20220111171048.3545974-6-peter.maydell@linaro.org
2022-01-11 20:10:40 +03:00
ItsCmdResult result = CMD_CONTINUE;
void *hostmem;
hwaddr buflen;
uint64_t cmdpkt[GITS_CMDQ_ENTRY_WORDS];
hw/intc/arm_gicv3_its: Use enum for return value of process_* functions When an ITS detects an error in a command, it has an implementation-defined (CONSTRAINED UNPREDICTABLE) choice of whether to ignore the command, proceeding to the next one in the queue, or to stall the ITS command queue, processing nothing further. The behaviour required when the read of the command packet from memory fails is less clearly documented, but the same set of choices as for command errors seem reasonable. The intention of the QEMU implementation, as documented in the comments, is that if we encounter a memory error reading the command packet or one of the various data tables then we should stall, but for command parameter errors we should ignore the queue and continue. However, we don't actually do this. To get the desired behaviour, the various process_* functions need to return true to cause process_cmdq() to advance to the next command and keep processing, and false to stall command processing. What they mostly do is return false for any kind of error. To make the code clearer, replace the 'bool' return from the process_ functions with an enum which may be either CMD_STALL or CMD_CONTINUE. In this commit no behaviour changes; in subsequent commits we will adjust the error-return paths for the process_ functions one by one. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20220111171048.3545974-6-peter.maydell@linaro.org
2022-01-11 20:10:40 +03:00
cq_offset = (rd_offset * GITS_CMDQ_ENTRY_SIZE);
buflen = GITS_CMDQ_ENTRY_SIZE;
hostmem = address_space_map(as, s->cq.base_addr + cq_offset,
&buflen, false, MEMTXATTRS_UNSPECIFIED);
if (!hostmem || buflen != GITS_CMDQ_ENTRY_SIZE) {
if (hostmem) {
address_space_unmap(as, hostmem, buflen, false, 0);
}
s->creadr = FIELD_DP64(s->creadr, GITS_CREADR, STALLED, 1);
qemu_log_mask(LOG_GUEST_ERROR,
"%s: could not read command at 0x%" PRIx64 "\n",
__func__, s->cq.base_addr + cq_offset);
break;
}
for (i = 0; i < ARRAY_SIZE(cmdpkt); i++) {
cmdpkt[i] = ldq_le_p(hostmem + i * sizeof(uint64_t));
}
address_space_unmap(as, hostmem, buflen, false, 0);
cmd = cmdpkt[0] & CMD_MASK;
trace_gicv3_its_process_command(rd_offset, cmd);
switch (cmd) {
case GITS_CMD_INT:
result = process_its_cmd(s, cmdpkt, INTERRUPT);
break;
case GITS_CMD_CLEAR:
result = process_its_cmd(s, cmdpkt, CLEAR);
break;
case GITS_CMD_SYNC:
/*
* Current implementation makes a blocking synchronous call
* for every command issued earlier, hence the internal state
* is already consistent by the time SYNC command is executed.
* Hence no further processing is required for SYNC command.
*/
trace_gicv3_its_cmd_sync();
break;
case GITS_CMD_MAPD:
result = process_mapd(s, cmdpkt);
break;
case GITS_CMD_MAPC:
result = process_mapc(s, cmdpkt);
break;
case GITS_CMD_MAPTI:
result = process_mapti(s, cmdpkt, false);
break;
case GITS_CMD_MAPI:
result = process_mapti(s, cmdpkt, true);
break;
case GITS_CMD_DISCARD:
result = process_its_cmd(s, cmdpkt, DISCARD);
break;
case GITS_CMD_INV:
case GITS_CMD_INVALL:
/*
* Current implementation doesn't cache any ITS tables,
* but the calculated lpi priority information. We only
* need to trigger lpi priority re-calculation to be in
* sync with LPI config table or pending table changes.
*/
trace_gicv3_its_cmd_inv();
for (i = 0; i < s->gicv3->num_cpu; i++) {
gicv3_redist_update_lpi(&s->gicv3->cpu[i]);
}
break;
case GITS_CMD_MOVI:
result = process_movi(s, cmdpkt);
break;
case GITS_CMD_MOVALL:
result = process_movall(s, cmdpkt);
break;
default:
trace_gicv3_its_cmd_unknown(cmd);
break;
}
hw/intc/arm_gicv3_its: Use enum for return value of process_* functions When an ITS detects an error in a command, it has an implementation-defined (CONSTRAINED UNPREDICTABLE) choice of whether to ignore the command, proceeding to the next one in the queue, or to stall the ITS command queue, processing nothing further. The behaviour required when the read of the command packet from memory fails is less clearly documented, but the same set of choices as for command errors seem reasonable. The intention of the QEMU implementation, as documented in the comments, is that if we encounter a memory error reading the command packet or one of the various data tables then we should stall, but for command parameter errors we should ignore the queue and continue. However, we don't actually do this. To get the desired behaviour, the various process_* functions need to return true to cause process_cmdq() to advance to the next command and keep processing, and false to stall command processing. What they mostly do is return false for any kind of error. To make the code clearer, replace the 'bool' return from the process_ functions with an enum which may be either CMD_STALL or CMD_CONTINUE. In this commit no behaviour changes; in subsequent commits we will adjust the error-return paths for the process_ functions one by one. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20220111171048.3545974-6-peter.maydell@linaro.org
2022-01-11 20:10:40 +03:00
if (result == CMD_CONTINUE) {
rd_offset++;
hw/intc/arm_gicv3_its: Fix various off-by-one errors The ITS code has to check whether various parameters passed in commands are in-bounds, where the limit is defined in terms of the number of bits that are available for the parameter. (For example, the GITS_TYPER.Devbits ID register field specifies the number of DeviceID bits minus 1, and device IDs passed in the MAPTI and MAPD command packets must fit in that many bits.) Currently we have off-by-one bugs in many of these bounds checks. The typical problem is that we define a max_foo as 1 << n. In the Devbits example, we set s->dt.max_ids = 1UL << (GITS_TYPER.Devbits + 1). However later when we do the bounds check we write if (devid > s->dt.max_ids) { /* command error */ } which incorrectly permits a devid of 1 << n. These bugs will not cause QEMU crashes because the ID values being checked are only used for accesses into tables held in guest memory which we access with address_space_*() functions, but they are incorrect behaviour of our emulation. Fix them by standardizing on this pattern: * bounds limits are named num_foos and are the 2^n value (equal to the number of valid foo values) * bounds checks are either if (fooid < num_foos) { good } or if (fooid >= num_foos) { bad } In this commit we fix the handling of the number of IDs in the device table and the collection table, and the number of commands that will fit in the command queue. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2022-01-07 20:08:00 +03:00
rd_offset %= s->cq.num_entries;
s->creadr = FIELD_DP64(s->creadr, GITS_CREADR, OFFSET, rd_offset);
} else {
hw/intc/arm_gicv3_its: Use enum for return value of process_* functions When an ITS detects an error in a command, it has an implementation-defined (CONSTRAINED UNPREDICTABLE) choice of whether to ignore the command, proceeding to the next one in the queue, or to stall the ITS command queue, processing nothing further. The behaviour required when the read of the command packet from memory fails is less clearly documented, but the same set of choices as for command errors seem reasonable. The intention of the QEMU implementation, as documented in the comments, is that if we encounter a memory error reading the command packet or one of the various data tables then we should stall, but for command parameter errors we should ignore the queue and continue. However, we don't actually do this. To get the desired behaviour, the various process_* functions need to return true to cause process_cmdq() to advance to the next command and keep processing, and false to stall command processing. What they mostly do is return false for any kind of error. To make the code clearer, replace the 'bool' return from the process_ functions with an enum which may be either CMD_STALL or CMD_CONTINUE. In this commit no behaviour changes; in subsequent commits we will adjust the error-return paths for the process_ functions one by one. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20220111171048.3545974-6-peter.maydell@linaro.org
2022-01-11 20:10:40 +03:00
/* CMD_STALL */
s->creadr = FIELD_DP64(s->creadr, GITS_CREADR, STALLED, 1);
qemu_log_mask(LOG_GUEST_ERROR,
hw/intc/arm_gicv3_its: Use enum for return value of process_* functions When an ITS detects an error in a command, it has an implementation-defined (CONSTRAINED UNPREDICTABLE) choice of whether to ignore the command, proceeding to the next one in the queue, or to stall the ITS command queue, processing nothing further. The behaviour required when the read of the command packet from memory fails is less clearly documented, but the same set of choices as for command errors seem reasonable. The intention of the QEMU implementation, as documented in the comments, is that if we encounter a memory error reading the command packet or one of the various data tables then we should stall, but for command parameter errors we should ignore the queue and continue. However, we don't actually do this. To get the desired behaviour, the various process_* functions need to return true to cause process_cmdq() to advance to the next command and keep processing, and false to stall command processing. What they mostly do is return false for any kind of error. To make the code clearer, replace the 'bool' return from the process_ functions with an enum which may be either CMD_STALL or CMD_CONTINUE. In this commit no behaviour changes; in subsequent commits we will adjust the error-return paths for the process_ functions one by one. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20220111171048.3545974-6-peter.maydell@linaro.org
2022-01-11 20:10:40 +03:00
"%s: 0x%x cmd processing failed, stalling\n",
__func__, cmd);
break;
}
}
}
/*
* This function extracts the ITS Device and Collection table specific
* parameters (like base_addr, size etc) from GITS_BASER register.
* It is called during ITS enable and also during post_load migration
*/
static void extract_table_params(GICv3ITSState *s)
{
uint16_t num_pages = 0;
uint8_t page_sz_type;
uint8_t type;
uint32_t page_sz = 0;
uint64_t value;
for (int i = 0; i < 8; i++) {
TableDesc *td;
int idbits;
value = s->baser[i];
if (!value) {
continue;
}
page_sz_type = FIELD_EX64(value, GITS_BASER, PAGESIZE);
switch (page_sz_type) {
case 0:
page_sz = GITS_PAGE_SIZE_4K;
break;
case 1:
page_sz = GITS_PAGE_SIZE_16K;
break;
case 2:
case 3:
page_sz = GITS_PAGE_SIZE_64K;
break;
default:
g_assert_not_reached();
}
num_pages = FIELD_EX64(value, GITS_BASER, SIZE) + 1;
type = FIELD_EX64(value, GITS_BASER, TYPE);
switch (type) {
case GITS_BASER_TYPE_DEVICE:
td = &s->dt;
idbits = FIELD_EX64(s->typer, GITS_TYPER, DEVBITS) + 1;
break;
case GITS_BASER_TYPE_COLLECTION:
td = &s->ct;
if (FIELD_EX64(s->typer, GITS_TYPER, CIL)) {
idbits = FIELD_EX64(s->typer, GITS_TYPER, CIDBITS) + 1;
} else {
/* 16-bit CollectionId supported when CIL == 0 */
idbits = 16;
}
break;
default:
/*
* GITS_BASER<n>.TYPE is read-only, so GITS_BASER_RO_MASK
* ensures we will only see type values corresponding to
* the values set up in gicv3_its_reset().
*/
g_assert_not_reached();
}
memset(td, 0, sizeof(*td));
/*
* If GITS_BASER<n>.Valid is 0 for any <n> then we will not process
* interrupts. (GITS_TYPER.HCC is 0 for this implementation, so we
* do not have a special case where the GITS_BASER<n>.Valid bit is 0
* for the register corresponding to the Collection table but we
* still have to process interrupts using non-memory-backed
* Collection table entries.)
* The specification makes it UNPREDICTABLE to enable the ITS without
* marking each BASER<n> as valid. We choose to handle these as if
* the table was zero-sized, so commands using the table will fail
* and interrupts requested via GITS_TRANSLATER writes will be ignored.
* This happens automatically by leaving the num_entries field at
* zero, which will be caught by the bounds checks we have before
* every table lookup anyway.
*/
if (!FIELD_EX64(value, GITS_BASER, VALID)) {
continue;
}
td->page_sz = page_sz;
td->indirect = FIELD_EX64(value, GITS_BASER, INDIRECT);
td->entry_sz = FIELD_EX64(value, GITS_BASER, ENTRYSIZE) + 1;
td->base_addr = baser_base_addr(value, page_sz);
if (!td->indirect) {
hw/intc/arm_gicv3_its: Fix various off-by-one errors The ITS code has to check whether various parameters passed in commands are in-bounds, where the limit is defined in terms of the number of bits that are available for the parameter. (For example, the GITS_TYPER.Devbits ID register field specifies the number of DeviceID bits minus 1, and device IDs passed in the MAPTI and MAPD command packets must fit in that many bits.) Currently we have off-by-one bugs in many of these bounds checks. The typical problem is that we define a max_foo as 1 << n. In the Devbits example, we set s->dt.max_ids = 1UL << (GITS_TYPER.Devbits + 1). However later when we do the bounds check we write if (devid > s->dt.max_ids) { /* command error */ } which incorrectly permits a devid of 1 << n. These bugs will not cause QEMU crashes because the ID values being checked are only used for accesses into tables held in guest memory which we access with address_space_*() functions, but they are incorrect behaviour of our emulation. Fix them by standardizing on this pattern: * bounds limits are named num_foos and are the 2^n value (equal to the number of valid foo values) * bounds checks are either if (fooid < num_foos) { good } or if (fooid >= num_foos) { bad } In this commit we fix the handling of the number of IDs in the device table and the collection table, and the number of commands that will fit in the command queue. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2022-01-07 20:08:00 +03:00
td->num_entries = (num_pages * page_sz) / td->entry_sz;
} else {
hw/intc/arm_gicv3_its: Fix various off-by-one errors The ITS code has to check whether various parameters passed in commands are in-bounds, where the limit is defined in terms of the number of bits that are available for the parameter. (For example, the GITS_TYPER.Devbits ID register field specifies the number of DeviceID bits minus 1, and device IDs passed in the MAPTI and MAPD command packets must fit in that many bits.) Currently we have off-by-one bugs in many of these bounds checks. The typical problem is that we define a max_foo as 1 << n. In the Devbits example, we set s->dt.max_ids = 1UL << (GITS_TYPER.Devbits + 1). However later when we do the bounds check we write if (devid > s->dt.max_ids) { /* command error */ } which incorrectly permits a devid of 1 << n. These bugs will not cause QEMU crashes because the ID values being checked are only used for accesses into tables held in guest memory which we access with address_space_*() functions, but they are incorrect behaviour of our emulation. Fix them by standardizing on this pattern: * bounds limits are named num_foos and are the 2^n value (equal to the number of valid foo values) * bounds checks are either if (fooid < num_foos) { good } or if (fooid >= num_foos) { bad } In this commit we fix the handling of the number of IDs in the device table and the collection table, and the number of commands that will fit in the command queue. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2022-01-07 20:08:00 +03:00
td->num_entries = (((num_pages * page_sz) /
L1TABLE_ENTRY_SIZE) *
(page_sz / td->entry_sz));
}
td->num_entries = MIN(td->num_entries, 1ULL << idbits);
}
}
static void extract_cmdq_params(GICv3ITSState *s)
{
uint16_t num_pages = 0;
uint64_t value = s->cbaser;
num_pages = FIELD_EX64(value, GITS_CBASER, SIZE) + 1;
memset(&s->cq, 0 , sizeof(s->cq));
if (FIELD_EX64(value, GITS_CBASER, VALID)) {
hw/intc/arm_gicv3_its: Fix various off-by-one errors The ITS code has to check whether various parameters passed in commands are in-bounds, where the limit is defined in terms of the number of bits that are available for the parameter. (For example, the GITS_TYPER.Devbits ID register field specifies the number of DeviceID bits minus 1, and device IDs passed in the MAPTI and MAPD command packets must fit in that many bits.) Currently we have off-by-one bugs in many of these bounds checks. The typical problem is that we define a max_foo as 1 << n. In the Devbits example, we set s->dt.max_ids = 1UL << (GITS_TYPER.Devbits + 1). However later when we do the bounds check we write if (devid > s->dt.max_ids) { /* command error */ } which incorrectly permits a devid of 1 << n. These bugs will not cause QEMU crashes because the ID values being checked are only used for accesses into tables held in guest memory which we access with address_space_*() functions, but they are incorrect behaviour of our emulation. Fix them by standardizing on this pattern: * bounds limits are named num_foos and are the 2^n value (equal to the number of valid foo values) * bounds checks are either if (fooid < num_foos) { good } or if (fooid >= num_foos) { bad } In this commit we fix the handling of the number of IDs in the device table and the collection table, and the number of commands that will fit in the command queue. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2022-01-07 20:08:00 +03:00
s->cq.num_entries = (num_pages * GITS_PAGE_SIZE_4K) /
GITS_CMDQ_ENTRY_SIZE;
s->cq.base_addr = FIELD_EX64(value, GITS_CBASER, PHYADDR);
s->cq.base_addr <<= R_GITS_CBASER_PHYADDR_SHIFT;
}
}
static MemTxResult gicv3_its_translation_read(void *opaque, hwaddr offset,
uint64_t *data, unsigned size,
MemTxAttrs attrs)
{
/*
* GITS_TRANSLATER is write-only, and all other addresses
* in the interrupt translation space frame are RES0.
*/
*data = 0;
return MEMTX_OK;
}
static MemTxResult gicv3_its_translation_write(void *opaque, hwaddr offset,
uint64_t data, unsigned size,
MemTxAttrs attrs)
{
GICv3ITSState *s = (GICv3ITSState *)opaque;
bool result = true;
trace_gicv3_its_translation_write(offset, data, size, attrs.requester_id);
switch (offset) {
case GITS_TRANSLATER:
if (s->ctlr & R_GITS_CTLR_ENABLED_MASK) {
result = do_process_its_cmd(s, attrs.requester_id, data, NONE);
}
break;
default:
break;
}
if (result) {
return MEMTX_OK;
} else {
return MEMTX_ERROR;
}
}
static bool its_writel(GICv3ITSState *s, hwaddr offset,
uint64_t value, MemTxAttrs attrs)
{
bool result = true;
int index;
switch (offset) {
case GITS_CTLR:
if (value & R_GITS_CTLR_ENABLED_MASK) {
s->ctlr |= R_GITS_CTLR_ENABLED_MASK;
extract_table_params(s);
extract_cmdq_params(s);
process_cmdq(s);
} else {
s->ctlr &= ~R_GITS_CTLR_ENABLED_MASK;
}
break;
case GITS_CBASER:
/*
* IMPDEF choice:- GITS_CBASER register becomes RO if ITS is
* already enabled
*/
if (!(s->ctlr & R_GITS_CTLR_ENABLED_MASK)) {
s->cbaser = deposit64(s->cbaser, 0, 32, value);
s->creadr = 0;
}
break;
case GITS_CBASER + 4:
/*
* IMPDEF choice:- GITS_CBASER register becomes RO if ITS is
* already enabled
*/
if (!(s->ctlr & R_GITS_CTLR_ENABLED_MASK)) {
s->cbaser = deposit64(s->cbaser, 32, 32, value);
s->creadr = 0;
}
break;
case GITS_CWRITER:
s->cwriter = deposit64(s->cwriter, 0, 32,
(value & ~R_GITS_CWRITER_RETRY_MASK));
if (s->cwriter != s->creadr) {
process_cmdq(s);
}
break;
case GITS_CWRITER + 4:
s->cwriter = deposit64(s->cwriter, 32, 32, value);
break;
case GITS_CREADR:
if (s->gicv3->gicd_ctlr & GICD_CTLR_DS) {
s->creadr = deposit64(s->creadr, 0, 32,
(value & ~R_GITS_CREADR_STALLED_MASK));
} else {
/* RO register, ignore the write */
qemu_log_mask(LOG_GUEST_ERROR,
"%s: invalid guest write to RO register at offset "
TARGET_FMT_plx "\n", __func__, offset);
}
break;
case GITS_CREADR + 4:
if (s->gicv3->gicd_ctlr & GICD_CTLR_DS) {
s->creadr = deposit64(s->creadr, 32, 32, value);
} else {
/* RO register, ignore the write */
qemu_log_mask(LOG_GUEST_ERROR,
"%s: invalid guest write to RO register at offset "
TARGET_FMT_plx "\n", __func__, offset);
}
break;
case GITS_BASER ... GITS_BASER + 0x3f:
/*
* IMPDEF choice:- GITS_BASERn register becomes RO if ITS is
* already enabled
*/
if (!(s->ctlr & R_GITS_CTLR_ENABLED_MASK)) {
index = (offset - GITS_BASER) / 8;
if (s->baser[index] == 0) {
/* Unimplemented GITS_BASERn: RAZ/WI */
break;
}
if (offset & 7) {
value <<= 32;
value &= ~GITS_BASER_RO_MASK;
s->baser[index] &= GITS_BASER_RO_MASK | MAKE_64BIT_MASK(0, 32);
s->baser[index] |= value;
} else {
value &= ~GITS_BASER_RO_MASK;
s->baser[index] &= GITS_BASER_RO_MASK | MAKE_64BIT_MASK(32, 32);
s->baser[index] |= value;
}
}
break;
case GITS_IIDR:
case GITS_IDREGS ... GITS_IDREGS + 0x2f:
/* RO registers, ignore the write */
qemu_log_mask(LOG_GUEST_ERROR,
"%s: invalid guest write to RO register at offset "
TARGET_FMT_plx "\n", __func__, offset);
break;
default:
result = false;
break;
}
return result;
}
static bool its_readl(GICv3ITSState *s, hwaddr offset,
uint64_t *data, MemTxAttrs attrs)
{
bool result = true;
int index;
switch (offset) {
case GITS_CTLR:
*data = s->ctlr;
break;
case GITS_IIDR:
*data = gicv3_iidr();
break;
case GITS_IDREGS ... GITS_IDREGS + 0x2f:
/* ID registers */
*data = gicv3_idreg(offset - GITS_IDREGS, GICV3_PIDR0_ITS);
break;
case GITS_TYPER:
*data = extract64(s->typer, 0, 32);
break;
case GITS_TYPER + 4:
*data = extract64(s->typer, 32, 32);
break;
case GITS_CBASER:
*data = extract64(s->cbaser, 0, 32);
break;
case GITS_CBASER + 4:
*data = extract64(s->cbaser, 32, 32);
break;
case GITS_CREADR:
*data = extract64(s->creadr, 0, 32);
break;
case GITS_CREADR + 4:
*data = extract64(s->creadr, 32, 32);
break;
case GITS_CWRITER:
*data = extract64(s->cwriter, 0, 32);
break;
case GITS_CWRITER + 4:
*data = extract64(s->cwriter, 32, 32);
break;
case GITS_BASER ... GITS_BASER + 0x3f:
index = (offset - GITS_BASER) / 8;
if (offset & 7) {
*data = extract64(s->baser[index], 32, 32);
} else {
*data = extract64(s->baser[index], 0, 32);
}
break;
default:
result = false;
break;
}
return result;
}
static bool its_writell(GICv3ITSState *s, hwaddr offset,
uint64_t value, MemTxAttrs attrs)
{
bool result = true;
int index;
switch (offset) {
case GITS_BASER ... GITS_BASER + 0x3f:
/*
* IMPDEF choice:- GITS_BASERn register becomes RO if ITS is
* already enabled
*/
if (!(s->ctlr & R_GITS_CTLR_ENABLED_MASK)) {
index = (offset - GITS_BASER) / 8;
if (s->baser[index] == 0) {
/* Unimplemented GITS_BASERn: RAZ/WI */
break;
}
s->baser[index] &= GITS_BASER_RO_MASK;
s->baser[index] |= (value & ~GITS_BASER_RO_MASK);
}
break;
case GITS_CBASER:
/*
* IMPDEF choice:- GITS_CBASER register becomes RO if ITS is
* already enabled
*/
if (!(s->ctlr & R_GITS_CTLR_ENABLED_MASK)) {
s->cbaser = value;
s->creadr = 0;
}
break;
case GITS_CWRITER:
s->cwriter = value & ~R_GITS_CWRITER_RETRY_MASK;
if (s->cwriter != s->creadr) {
process_cmdq(s);
}
break;
case GITS_CREADR:
if (s->gicv3->gicd_ctlr & GICD_CTLR_DS) {
s->creadr = value & ~R_GITS_CREADR_STALLED_MASK;
} else {
/* RO register, ignore the write */
qemu_log_mask(LOG_GUEST_ERROR,
"%s: invalid guest write to RO register at offset "
TARGET_FMT_plx "\n", __func__, offset);
}
break;
case GITS_TYPER:
/* RO registers, ignore the write */
qemu_log_mask(LOG_GUEST_ERROR,
"%s: invalid guest write to RO register at offset "
TARGET_FMT_plx "\n", __func__, offset);
break;
default:
result = false;
break;
}
return result;
}
static bool its_readll(GICv3ITSState *s, hwaddr offset,
uint64_t *data, MemTxAttrs attrs)
{
bool result = true;
int index;
switch (offset) {
case GITS_TYPER:
*data = s->typer;
break;
case GITS_BASER ... GITS_BASER + 0x3f:
index = (offset - GITS_BASER) / 8;
*data = s->baser[index];
break;
case GITS_CBASER:
*data = s->cbaser;
break;
case GITS_CREADR:
*data = s->creadr;
break;
case GITS_CWRITER:
*data = s->cwriter;
break;
default:
result = false;
break;
}
return result;
}
static MemTxResult gicv3_its_read(void *opaque, hwaddr offset, uint64_t *data,
unsigned size, MemTxAttrs attrs)
{
GICv3ITSState *s = (GICv3ITSState *)opaque;
bool result;
switch (size) {
case 4:
result = its_readl(s, offset, data, attrs);
break;
case 8:
result = its_readll(s, offset, data, attrs);
break;
default:
result = false;
break;
}
if (!result) {
qemu_log_mask(LOG_GUEST_ERROR,
"%s: invalid guest read at offset " TARGET_FMT_plx
" size %u\n", __func__, offset, size);
trace_gicv3_its_badread(offset, size);
/*
* The spec requires that reserved registers are RAZ/WI;
* so use false returns from leaf functions as a way to
* trigger the guest-error logging but don't return it to
* the caller, or we'll cause a spurious guest data abort.
*/
*data = 0;
} else {
trace_gicv3_its_read(offset, *data, size);
}
return MEMTX_OK;
}
static MemTxResult gicv3_its_write(void *opaque, hwaddr offset, uint64_t data,
unsigned size, MemTxAttrs attrs)
{
GICv3ITSState *s = (GICv3ITSState *)opaque;
bool result;
switch (size) {
case 4:
result = its_writel(s, offset, data, attrs);
break;
case 8:
result = its_writell(s, offset, data, attrs);
break;
default:
result = false;
break;
}
if (!result) {
qemu_log_mask(LOG_GUEST_ERROR,
"%s: invalid guest write at offset " TARGET_FMT_plx
" size %u\n", __func__, offset, size);
trace_gicv3_its_badwrite(offset, data, size);
/*
* The spec requires that reserved registers are RAZ/WI;
* so use false returns from leaf functions as a way to
* trigger the guest-error logging but don't return it to
* the caller, or we'll cause a spurious guest data abort.
*/
} else {
trace_gicv3_its_write(offset, data, size);
}
return MEMTX_OK;
}
static const MemoryRegionOps gicv3_its_control_ops = {
.read_with_attrs = gicv3_its_read,
.write_with_attrs = gicv3_its_write,
.valid.min_access_size = 4,
.valid.max_access_size = 8,
.impl.min_access_size = 4,
.impl.max_access_size = 8,
.endianness = DEVICE_NATIVE_ENDIAN,
};
static const MemoryRegionOps gicv3_its_translation_ops = {
.read_with_attrs = gicv3_its_translation_read,
.write_with_attrs = gicv3_its_translation_write,
.valid.min_access_size = 2,
.valid.max_access_size = 4,
.impl.min_access_size = 2,
.impl.max_access_size = 4,
.endianness = DEVICE_NATIVE_ENDIAN,
};
static void gicv3_arm_its_realize(DeviceState *dev, Error **errp)
{
GICv3ITSState *s = ARM_GICV3_ITS_COMMON(dev);
int i;
for (i = 0; i < s->gicv3->num_cpu; i++) {
if (!(s->gicv3->cpu[i].gicr_typer & GICR_TYPER_PLPIS)) {
error_setg(errp, "Physical LPI not supported by CPU %d", i);
return;
}
}
gicv3_its_init_mmio(s, &gicv3_its_control_ops, &gicv3_its_translation_ops);
/* set the ITS default features supported */
hw/intc/arm_gicv3_its: Don't misuse GITS_TYPE_PHYSICAL define The GITS_TYPE_PHYSICAL define is the value we set the GITS_TYPER.Physical field to -- this is 1 to indicate that we support physical LPIs. (Support for virtual LPIs is the GITS_TYPER.Virtual field.) We also use this define as the *value* that we write into an interrupt translation table entry's INTTYPE field, which should be 1 for a physical interrupt and 0 for a virtual interrupt. Finally, we use it as a *mask* when we read the interrupt translation table entry INTTYPE field. Untangle this confusion: define an ITE_INTTYPE_VIRTUAL and ITE_INTTYPE_PHYSICAL to be the valid values of the ITE INTTYPE field, and replace the ad-hoc collection of ITE_ENTRY_* defines with use of the FIELD() macro to define the fields of an ITE and the FIELD_EX64() and FIELD_DP64() macros to read and write them. We use ITE in the new setup, rather than ITE_ENTRY, because ITE stands for "Interrupt translation entry" and so the extra "entry" would be redundant. We take the opportunity to correct the name of the field that holds the GICv4 'doorbell' interrupt ID (this is always the value 1023 in a GICv3, which is why we were calling it the 'spurious' field). The GITS_TYPE_PHYSICAL define is then used in only one place, where we set the initial GITS_TYPER value. Since GITS_TYPER.Physical is essentially a boolean, hiding the '1' value behind a macro is more confusing than helpful, so expand out the macro there and remove the define entirely. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2022-01-07 20:07:59 +03:00
s->typer = FIELD_DP64(s->typer, GITS_TYPER, PHYSICAL, 1);
s->typer = FIELD_DP64(s->typer, GITS_TYPER, ITT_ENTRY_SIZE,
ITS_ITT_ENTRY_SIZE - 1);
s->typer = FIELD_DP64(s->typer, GITS_TYPER, IDBITS, ITS_IDBITS);
s->typer = FIELD_DP64(s->typer, GITS_TYPER, DEVBITS, ITS_DEVBITS);
s->typer = FIELD_DP64(s->typer, GITS_TYPER, CIL, 1);
s->typer = FIELD_DP64(s->typer, GITS_TYPER, CIDBITS, ITS_CIDBITS);
}
static void gicv3_its_reset(DeviceState *dev)
{
GICv3ITSState *s = ARM_GICV3_ITS_COMMON(dev);
GICv3ITSClass *c = ARM_GICV3_ITS_GET_CLASS(s);
c->parent_reset(dev);
/* Quiescent bit reset to 1 */
s->ctlr = FIELD_DP32(s->ctlr, GITS_CTLR, QUIESCENT, 1);
/*
* setting GITS_BASER0.Type = 0b001 (Device)
* GITS_BASER1.Type = 0b100 (Collection Table)
* GITS_BASER<n>.Type,where n = 3 to 7 are 0b00 (Unimplemented)
* GITS_BASER<0,1>.Page_Size = 64KB
* and default translation table entry size to 16 bytes
*/
s->baser[0] = FIELD_DP64(s->baser[0], GITS_BASER, TYPE,
GITS_BASER_TYPE_DEVICE);
s->baser[0] = FIELD_DP64(s->baser[0], GITS_BASER, PAGESIZE,
GITS_BASER_PAGESIZE_64K);
s->baser[0] = FIELD_DP64(s->baser[0], GITS_BASER, ENTRYSIZE,
GITS_DTE_SIZE - 1);
s->baser[1] = FIELD_DP64(s->baser[1], GITS_BASER, TYPE,
GITS_BASER_TYPE_COLLECTION);
s->baser[1] = FIELD_DP64(s->baser[1], GITS_BASER, PAGESIZE,
GITS_BASER_PAGESIZE_64K);
s->baser[1] = FIELD_DP64(s->baser[1], GITS_BASER, ENTRYSIZE,
GITS_CTE_SIZE - 1);
}
static void gicv3_its_post_load(GICv3ITSState *s)
{
if (s->ctlr & R_GITS_CTLR_ENABLED_MASK) {
extract_table_params(s);
extract_cmdq_params(s);
}
}
static Property gicv3_its_props[] = {
DEFINE_PROP_LINK("parent-gicv3", GICv3ITSState, gicv3, "arm-gicv3",
GICv3State *),
DEFINE_PROP_END_OF_LIST(),
};
static void gicv3_its_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
GICv3ITSClass *ic = ARM_GICV3_ITS_CLASS(klass);
GICv3ITSCommonClass *icc = ARM_GICV3_ITS_COMMON_CLASS(klass);
dc->realize = gicv3_arm_its_realize;
device_class_set_props(dc, gicv3_its_props);
device_class_set_parent_reset(dc, gicv3_its_reset, &ic->parent_reset);
icc->post_load = gicv3_its_post_load;
}
static const TypeInfo gicv3_its_info = {
.name = TYPE_ARM_GICV3_ITS,
.parent = TYPE_ARM_GICV3_ITS_COMMON,
.instance_size = sizeof(GICv3ITSState),
.class_init = gicv3_its_class_init,
.class_size = sizeof(GICv3ITSClass),
};
static void gicv3_its_register_types(void)
{
type_register_static(&gicv3_its_info);
}
type_init(gicv3_its_register_types)