qemu/util/async.c

719 lines
18 KiB
C
Raw Normal View History

/*
* Data plane event loop
*
* Copyright (c) 2003-2008 Fabrice Bellard
* Copyright (c) 2009-2017 QEMU contributors
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
2016-03-14 11:01:28 +03:00
#include "qapi/error.h"
#include "block/aio.h"
#include "block/thread-pool.h"
#include "qemu/main-loop.h"
#include "qemu/atomic.h"
#include "qemu/rcu_queue.h"
#include "block/raw-aio.h"
#include "qemu/coroutine_int.h"
#include "qemu/coroutine-tls.h"
#include "trace.h"
/***********************************************************/
/* bottom halves (can be seen as timers which expire ASAP) */
/* QEMUBH::flags values */
enum {
/* Already enqueued and waiting for aio_bh_poll() */
BH_PENDING = (1 << 0),
/* Invoke the callback */
BH_SCHEDULED = (1 << 1),
/* Delete without invoking callback */
BH_DELETED = (1 << 2),
/* Delete after invoking callback */
BH_ONESHOT = (1 << 3),
/* Schedule periodically when the event loop is idle */
BH_IDLE = (1 << 4),
};
struct QEMUBH {
AioContext *ctx;
const char *name;
QEMUBHFunc *cb;
void *opaque;
QSLIST_ENTRY(QEMUBH) next;
unsigned flags;
};
/* Called concurrently from any thread */
static void aio_bh_enqueue(QEMUBH *bh, unsigned new_flags)
{
AioContext *ctx = bh->ctx;
unsigned old_flags;
/*
* The memory barrier implicit in qatomic_fetch_or makes sure that:
* 1. idle & any writes needed by the callback are done before the
* locations are read in the aio_bh_poll.
* 2. ctx is loaded before the callback has a chance to execute and bh
* could be freed.
*/
old_flags = qatomic_fetch_or(&bh->flags, BH_PENDING | new_flags);
if (!(old_flags & BH_PENDING)) {
QSLIST_INSERT_HEAD_ATOMIC(&ctx->bh_list, bh, next);
}
aio_notify(ctx);
}
/* Only called from aio_bh_poll() and aio_ctx_finalize() */
static QEMUBH *aio_bh_dequeue(BHList *head, unsigned *flags)
{
QEMUBH *bh = QSLIST_FIRST_RCU(head);
if (!bh) {
return NULL;
}
QSLIST_REMOVE_HEAD(head, next);
/*
* The qatomic_and is paired with aio_bh_enqueue(). The implicit memory
* barrier ensures that the callback sees all writes done by the scheduling
* thread. It also ensures that the scheduling thread sees the cleared
* flag before bh->cb has run, and thus will call aio_notify again if
* necessary.
*/
*flags = qatomic_fetch_and(&bh->flags,
~(BH_PENDING | BH_SCHEDULED | BH_IDLE));
return bh;
}
void aio_bh_schedule_oneshot_full(AioContext *ctx, QEMUBHFunc *cb,
void *opaque, const char *name)
{
QEMUBH *bh;
bh = g_new(QEMUBH, 1);
*bh = (QEMUBH){
.ctx = ctx,
.cb = cb,
.opaque = opaque,
.name = name,
};
aio_bh_enqueue(bh, BH_SCHEDULED | BH_ONESHOT);
}
QEMUBH *aio_bh_new_full(AioContext *ctx, QEMUBHFunc *cb, void *opaque,
const char *name)
{
QEMUBH *bh;
bh = g_new(QEMUBH, 1);
*bh = (QEMUBH){
.ctx = ctx,
.cb = cb,
.opaque = opaque,
.name = name,
};
return bh;
}
void aio_bh_call(QEMUBH *bh)
{
bh->cb(bh->opaque);
}
/* Multiple occurrences of aio_bh_poll cannot be called concurrently. */
int aio_bh_poll(AioContext *ctx)
{
BHListSlice slice;
BHListSlice *s;
int ret = 0;
QSLIST_MOVE_ATOMIC(&slice.bh_list, &ctx->bh_list);
QSIMPLEQ_INSERT_TAIL(&ctx->bh_slice_list, &slice, next);
while ((s = QSIMPLEQ_FIRST(&ctx->bh_slice_list))) {
QEMUBH *bh;
unsigned flags;
bh = aio_bh_dequeue(&s->bh_list, &flags);
if (!bh) {
QSIMPLEQ_REMOVE_HEAD(&ctx->bh_slice_list, next);
continue;
}
if ((flags & (BH_SCHEDULED | BH_DELETED)) == BH_SCHEDULED) {
/* Idle BHs don't count as progress */
if (!(flags & BH_IDLE)) {
ret = 1;
}
aio_bh_call(bh);
}
if (flags & (BH_DELETED | BH_ONESHOT)) {
g_free(bh);
}
}
return ret;
}
void qemu_bh_schedule_idle(QEMUBH *bh)
{
aio_bh_enqueue(bh, BH_SCHEDULED | BH_IDLE);
}
void qemu_bh_schedule(QEMUBH *bh)
{
aio_bh_enqueue(bh, BH_SCHEDULED);
}
/* This func is async.
*/
void qemu_bh_cancel(QEMUBH *bh)
{
qatomic_and(&bh->flags, ~BH_SCHEDULED);
}
/* This func is async.The bottom half will do the delete action at the finial
* end.
*/
void qemu_bh_delete(QEMUBH *bh)
{
aio_bh_enqueue(bh, BH_DELETED);
}
static int64_t aio_compute_bh_timeout(BHList *head, int timeout)
{
QEMUBH *bh;
QSLIST_FOREACH_RCU(bh, head, next) {
if ((bh->flags & (BH_SCHEDULED | BH_DELETED)) == BH_SCHEDULED) {
if (bh->flags & BH_IDLE) {
/* idle bottom halves will be polled at least
* every 10ms */
timeout = 10000000;
} else {
/* non-idle bottom halves will be executed
* immediately */
return 0;
}
}
}
return timeout;
}
int64_t
aio_compute_timeout(AioContext *ctx)
{
BHListSlice *s;
int64_t deadline;
int timeout = -1;
timeout = aio_compute_bh_timeout(&ctx->bh_list, timeout);
if (timeout == 0) {
return 0;
}
QSIMPLEQ_FOREACH(s, &ctx->bh_slice_list, next) {
timeout = aio_compute_bh_timeout(&s->bh_list, timeout);
if (timeout == 0) {
return 0;
}
}
deadline = timerlistgroup_deadline_ns(&ctx->tlg);
if (deadline == 0) {
return 0;
} else {
return qemu_soonest_timeout(timeout, deadline);
}
}
static gboolean
aio_ctx_prepare(GSource *source, gint *timeout)
{
AioContext *ctx = (AioContext *) source;
qatomic_set(&ctx->notify_me, qatomic_read(&ctx->notify_me) | 1);
/*
* Write ctx->notify_me before computing the timeout
* (reading bottom half flags, etc.). Pairs with
* smp_mb in aio_notify().
*/
smp_mb();
AioContext: fix broken ctx->dispatching optimization This patch rewrites the ctx->dispatching optimization, which was the cause of some mysterious hangs that could be reproduced on aarch64 KVM only. The hangs were indirectly caused by aio_poll() and in particular by flash memory updates's call to blk_write(), which invokes aio_poll(). Fun stuff: they had an extremely short race window, so much that adding all kind of tracing to either the kernel or QEMU made it go away (a single printf made it half as reproducible). On the plus side, the failure mode (a hang until the next keypress) made it very easy to examine the state of the process with a debugger. And there was a very nice reproducer from Laszlo, which failed pretty often (more than half of the time) on any version of QEMU with a non-debug kernel; it also failed fast, while still in the firmware. So, it could have been worse. For some unknown reason they happened only with virtio-scsi, but that's not important. It's more interesting that they disappeared with io=native, making thread-pool.c a likely suspect for where the bug arose. thread-pool.c is also one of the few places which use bottom halves across threads, by the way. I hope that no other similar bugs exist, but just in case :) I am going to describe how the successful debugging went... Since the likely culprit was the ctx->dispatching optimization, which mostly affects bottom halves, the first observation was that there are two qemu_bh_schedule() invocations in the thread pool: the one in the aio worker and the one in thread_pool_completion_bh. The latter always causes the optimization to trigger, the former may or may not. In order to restrict the possibilities, I introduced new functions qemu_bh_schedule_slow() and qemu_bh_schedule_fast(): /* qemu_bh_schedule_slow: */ ctx = bh->ctx; bh->idle = 0; if (atomic_xchg(&bh->scheduled, 1) == 0) { event_notifier_set(&ctx->notifier); } /* qemu_bh_schedule_fast: */ ctx = bh->ctx; bh->idle = 0; assert(ctx->dispatching); atomic_xchg(&bh->scheduled, 1); Notice how the atomic_xchg is still in qemu_bh_schedule_slow(). This was already debated a few months ago, so I assumed it to be correct. In retrospect this was a very good idea, as you'll see later. Changing thread_pool_completion_bh() to qemu_bh_schedule_fast() didn't trigger the assertion (as expected). Changing the worker's invocation to qemu_bh_schedule_slow() didn't hide the bug (another assumption which luckily held). This already limited heavily the amount of interaction between the threads, hinting that the problematic events must have triggered around thread_pool_completion_bh(). As mentioned early, invoking a debugger to examine the state of a hung process was pretty easy; the iothread was always waiting on a poll(..., -1) system call. Infinite timeouts are much rarer on x86, and this could be the reason why the bug was never observed there. With the buggy sequence more or less resolved to an interaction between thread_pool_completion_bh() and poll(..., -1), my "tracing" strategy was to just add a few qemu_clock_get_ns(QEMU_CLOCK_REALTIME) calls, hoping that the ordering of aio_ctx_prepare(), aio_ctx_dispatch, poll() and qemu_bh_schedule_fast() would provide some hint. The output was: (gdb) p last_prepare $3 = 103885451 (gdb) p last_dispatch $4 = 103876492 (gdb) p last_poll $5 = 115909333 (gdb) p last_schedule $6 = 115925212 Notice how the last call to qemu_poll_ns() came after aio_ctx_dispatch(). This makes little sense unless there is an aio_poll() call involved, and indeed with a slightly different instrumentation you can see that there is one: (gdb) p last_prepare $3 = 107569679 (gdb) p last_dispatch $4 = 107561600 (gdb) p last_aio_poll $5 = 110671400 (gdb) p last_schedule $6 = 110698917 So the scenario becomes clearer: iothread VCPU thread -------------------------------------------------------------------------- aio_ctx_prepare aio_ctx_check qemu_poll_ns(timeout=-1) aio_poll aio_dispatch thread_pool_completion_bh qemu_bh_schedule() At this point bh->scheduled = 1 and the iothread has not been woken up. The solution must be close, but this alone should not be a problem, because the bottom half is only rescheduled to account for rare situations (see commit 3c80ca1, thread-pool: avoid deadlock in nested aio_poll() calls, 2014-07-15). Introducing a third thread---a thread pool worker thread, which also does qemu_bh_schedule()---does bring out the problematic case. The third thread must be awakened *after* the callback is complete and thread_pool_completion_bh has redone the whole loop, explaining the short race window. And then this is what happens: thread pool worker -------------------------------------------------------------------------- <I/O completes> qemu_bh_schedule() Tada, bh->scheduled is already 1, so qemu_bh_schedule() does nothing and the iothread is never woken up. This is where the bh->scheduled optimization comes into play---it is correct, but removing it would have masked the bug. So, what is the bug? Well, the question asked by the ctx->dispatching optimization ("is any active aio_poll dispatching?") was wrong. The right question to ask instead is "is any active aio_poll *not* dispatching", i.e. in the prepare or poll phases? In that case, the aio_poll is sleeping or might go to sleep anytime soon, and the EventNotifier must be invoked to wake it up. In any other case (including if there is *no* active aio_poll at all!) we can just wait for the next prepare phase to pick up the event (e.g. a bottom half); the prepare phase will avoid the blocking and service the bottom half. Expressing the invariant with a logic formula, the broken one looked like: !(exists(thread): in_dispatching(thread)) => !optimize or equivalently: !(exists(thread): in_aio_poll(thread) && in_dispatching(thread)) => !optimize In the correct one, the negation is in a slightly different place: (exists(thread): in_aio_poll(thread) && !in_dispatching(thread)) => !optimize or equivalently: (exists(thread): in_prepare_or_poll(thread)) => !optimize Even if the difference boils down to moving an exclamation mark :) the implementation is quite different. However, I think the new one is simpler to understand. In the old implementation, the "exists" was implemented with a boolean value. This didn't really support well the case of multiple concurrent event loops, but I thought that this was okay: aio_poll holds the AioContext lock so there cannot be concurrent aio_poll invocations, and I was just considering nested event loops. However, aio_poll _could_ indeed be concurrent with the GSource. This is why I came up with the wrong invariant. In the new implementation, "exists" is computed simply by counting how many threads are in the prepare or poll phases. There are some interesting points to consider, but the gist of the idea remains: 1) AioContext can be used through GSource as well; as mentioned in the patch, bit 0 of the counter is reserved for the GSource. 2) the counter need not be updated for a non-blocking aio_poll, because it won't sleep forever anyway. This is just a matter of checking the "blocking" variable. This requires some changes to the win32 implementation, but is otherwise not too complicated. 3) as mentioned above, the new implementation will not call aio_notify when there is *no* active aio_poll at all. The tests have to be adjusted for this change. The calls to aio_notify in async.c are fine; they only want to kick aio_poll out of a blocking wait, but need not do anything if aio_poll is not running. 4) nested aio_poll: these just work with the new implementation; when a nested event loop is invoked, the outer event loop is never in the prepare or poll phases. The outer event loop thus has already decremented the counter. Reported-by: Richard W. M. Jones <rjones@redhat.com> Reported-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Tested-by: Richard W.M. Jones <rjones@redhat.com> Message-id: 1437487673-23740-5-git-send-email-pbonzini@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-07-21 17:07:51 +03:00
/* We assume there is no timeout already supplied */
*timeout = qemu_timeout_ns_to_ms(aio_compute_timeout(ctx));
if (aio_prepare(ctx)) {
*timeout = 0;
}
return *timeout == 0;
}
static gboolean
aio_ctx_check(GSource *source)
{
AioContext *ctx = (AioContext *) source;
QEMUBH *bh;
BHListSlice *s;
/* Finish computing the timeout before clearing the flag. */
qatomic_store_release(&ctx->notify_me, qatomic_read(&ctx->notify_me) & ~1);
aio_notify_accept(ctx);
AioContext: fix broken placement of event_notifier_test_and_clear event_notifier_test_and_clear must be called before processing events. Otherwise, an aio_poll could "eat" the notification before the main I/O thread invokes ppoll(). The main I/O thread then never wakes up. This is an example of what could happen: i/o thread vcpu thread worker thread --------------------------------------------------------------------- lock_iothread notify_me = 1 ... unlock_iothread bh->scheduled = 1 event_notifier_set lock_iothread notify_me = 3 ppoll notify_me = 1 aio_dispatch aio_bh_poll thread_pool_completion_bh bh->scheduled = 1 event_notifier_set node->io_read(node->opaque) event_notifier_test_and_clear ppoll *** hang *** "Tracing" with qemu_clock_get_ns shows pretty much the same behavior as in the previous bug, so there are no new tricks here---just stare more at the code until it is apparent. One could also use a formal model, of course. The included one shows this with three processes: notifier corresponds to a QEMU thread pool worker, temporary_waiter to a VCPU thread that invokes aio_poll(), waiter to the main I/O thread. I would be happy to say that the formal model found the bug for me, but actually I wrote it after the fact. This patch is a bit of a big hammer. The next one optimizes it, with help (this time for real rather than a posteriori :)) from another, similar formal model. Reported-by: Richard W. M. Jones <rjones@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Tested-by: Richard W.M. Jones <rjones@redhat.com> Message-id: 1437487673-23740-6-git-send-email-pbonzini@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-07-21 17:07:52 +03:00
QSLIST_FOREACH_RCU(bh, &ctx->bh_list, next) {
if ((bh->flags & (BH_SCHEDULED | BH_DELETED)) == BH_SCHEDULED) {
return true;
}
}
QSIMPLEQ_FOREACH(s, &ctx->bh_slice_list, next) {
QSLIST_FOREACH_RCU(bh, &s->bh_list, next) {
if ((bh->flags & (BH_SCHEDULED | BH_DELETED)) == BH_SCHEDULED) {
return true;
}
}
}
return aio_pending(ctx) || (timerlistgroup_deadline_ns(&ctx->tlg) == 0);
}
static gboolean
aio_ctx_dispatch(GSource *source,
GSourceFunc callback,
gpointer user_data)
{
AioContext *ctx = (AioContext *) source;
assert(callback == NULL);
aio_dispatch(ctx);
return true;
}
static void
aio_ctx_finalize(GSource *source)
{
AioContext *ctx = (AioContext *) source;
QEMUBH *bh;
unsigned flags;
thread_pool_free(ctx->thread_pool);
#ifdef CONFIG_LINUX_AIO
if (ctx->linux_aio) {
laio_detach_aio_context(ctx->linux_aio, ctx);
laio_cleanup(ctx->linux_aio);
ctx->linux_aio = NULL;
}
#endif
#ifdef CONFIG_LINUX_IO_URING
if (ctx->linux_io_uring) {
luring_detach_aio_context(ctx->linux_io_uring, ctx);
luring_cleanup(ctx->linux_io_uring);
ctx->linux_io_uring = NULL;
}
#endif
assert(QSLIST_EMPTY(&ctx->scheduled_coroutines));
qemu_bh_delete(ctx->co_schedule_bh);
/* There must be no aio_bh_poll() calls going on */
assert(QSIMPLEQ_EMPTY(&ctx->bh_slice_list));
while ((bh = aio_bh_dequeue(&ctx->bh_list, &flags))) {
/*
* qemu_bh_delete() must have been called on BHs in this AioContext. In
* many cases memory leaks, hangs, or inconsistent state occur when a
* BH is leaked because something still expects it to run.
*
* If you hit this, fix the lifecycle of the BH so that
* qemu_bh_delete() and any associated cleanup is called before the
* AioContext is finalized.
*/
if (unlikely(!(flags & BH_DELETED))) {
fprintf(stderr, "%s: BH '%s' leaked, aborting...\n",
__func__, bh->name);
abort();
}
g_free(bh);
}
aio-posix: split poll check from ready handler Adaptive polling measures the execution time of the polling check plus handlers called when a polled event becomes ready. Handlers can take a significant amount of time, making it look like polling was running for a long time when in fact the event handler was running for a long time. For example, on Linux the io_submit(2) syscall invoked when a virtio-blk device's virtqueue becomes ready can take 10s of microseconds. This can exceed the default polling interval (32 microseconds) and cause adaptive polling to stop polling. By excluding the handler's execution time from the polling check we make the adaptive polling calculation more accurate. As a result, the event loop now stays in polling mode where previously it would have fallen back to file descriptor monitoring. The following data was collected with virtio-blk num-queues=2 event_idx=off using an IOThread. Before: 168k IOPS, IOThread syscalls: 9837.115 ( 0.020 ms): IO iothread1/620155 io_submit(ctx_id: 140512552468480, nr: 16, iocbpp: 0x7fcb9f937db0) = 16 9837.158 ( 0.002 ms): IO iothread1/620155 write(fd: 103, buf: 0x556a2ef71b88, count: 8) = 8 9837.161 ( 0.001 ms): IO iothread1/620155 write(fd: 104, buf: 0x556a2ef71b88, count: 8) = 8 9837.163 ( 0.001 ms): IO iothread1/620155 ppoll(ufds: 0x7fcb90002800, nfds: 4, tsp: 0x7fcb9f1342d0, sigsetsize: 8) = 3 9837.164 ( 0.001 ms): IO iothread1/620155 read(fd: 107, buf: 0x7fcb9f939cc0, count: 512) = 8 9837.174 ( 0.001 ms): IO iothread1/620155 read(fd: 105, buf: 0x7fcb9f939cc0, count: 512) = 8 9837.176 ( 0.001 ms): IO iothread1/620155 read(fd: 106, buf: 0x7fcb9f939cc0, count: 512) = 8 9837.209 ( 0.035 ms): IO iothread1/620155 io_submit(ctx_id: 140512552468480, nr: 32, iocbpp: 0x7fca7d0cebe0) = 32 174k IOPS (+3.6%), IOThread syscalls: 9809.566 ( 0.036 ms): IO iothread1/623061 io_submit(ctx_id: 140539805028352, nr: 32, iocbpp: 0x7fd0cdd62be0) = 32 9809.625 ( 0.001 ms): IO iothread1/623061 write(fd: 103, buf: 0x5647cfba5f58, count: 8) = 8 9809.627 ( 0.002 ms): IO iothread1/623061 write(fd: 104, buf: 0x5647cfba5f58, count: 8) = 8 9809.663 ( 0.036 ms): IO iothread1/623061 io_submit(ctx_id: 140539805028352, nr: 32, iocbpp: 0x7fd0d0388b50) = 32 Notice that ppoll(2) and eventfd read(2) syscalls are eliminated because the IOThread stays in polling mode instead of falling back to file descriptor monitoring. As usual, polling is not implemented on Windows so this patch ignores the new io_poll_read() callback in aio-win32.c. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Message-id: 20211207132336.36627-2-stefanha@redhat.com [Fixed up aio_set_event_notifier() calls in tests/unit/test-fdmon-epoll.c added after this series was queued. --Stefan] Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-12-07 16:23:31 +03:00
aio_set_event_notifier(ctx, &ctx->notifier, false, NULL, NULL, NULL);
event_notifier_cleanup(&ctx->notifier);
qemu_rec_mutex_destroy(&ctx->lock);
qemu_lockcnt_destroy(&ctx->list_lock);
timerlistgroup_deinit(&ctx->tlg);
aio_context_destroy(ctx);
}
static GSourceFuncs aio_source_funcs = {
aio_ctx_prepare,
aio_ctx_check,
aio_ctx_dispatch,
aio_ctx_finalize
};
GSource *aio_get_g_source(AioContext *ctx)
{
aio_context_use_g_source(ctx);
g_source_ref(&ctx->source);
return &ctx->source;
}
ThreadPool *aio_get_thread_pool(AioContext *ctx)
{
if (!ctx->thread_pool) {
ctx->thread_pool = thread_pool_new(ctx);
}
return ctx->thread_pool;
}
#ifdef CONFIG_LINUX_AIO
LinuxAioState *aio_setup_linux_aio(AioContext *ctx, Error **errp)
{
if (!ctx->linux_aio) {
ctx->linux_aio = laio_init(errp);
if (ctx->linux_aio) {
laio_attach_aio_context(ctx->linux_aio, ctx);
}
}
return ctx->linux_aio;
}
LinuxAioState *aio_get_linux_aio(AioContext *ctx)
{
assert(ctx->linux_aio);
return ctx->linux_aio;
}
#endif
#ifdef CONFIG_LINUX_IO_URING
LuringState *aio_setup_linux_io_uring(AioContext *ctx, Error **errp)
{
if (ctx->linux_io_uring) {
return ctx->linux_io_uring;
}
ctx->linux_io_uring = luring_init(errp);
if (!ctx->linux_io_uring) {
return NULL;
}
luring_attach_aio_context(ctx->linux_io_uring, ctx);
return ctx->linux_io_uring;
}
LuringState *aio_get_linux_io_uring(AioContext *ctx)
{
assert(ctx->linux_io_uring);
return ctx->linux_io_uring;
}
#endif
void aio_notify(AioContext *ctx)
{
/*
* Write e.g. bh->flags before writing ctx->notified. Pairs with smp_mb in
* aio_notify_accept.
*/
smp_wmb();
qatomic_set(&ctx->notified, true);
/*
* Write ctx->notified before reading ctx->notify_me. Pairs
* with smp_mb in aio_ctx_prepare or aio_poll.
AioContext: fix broken ctx->dispatching optimization This patch rewrites the ctx->dispatching optimization, which was the cause of some mysterious hangs that could be reproduced on aarch64 KVM only. The hangs were indirectly caused by aio_poll() and in particular by flash memory updates's call to blk_write(), which invokes aio_poll(). Fun stuff: they had an extremely short race window, so much that adding all kind of tracing to either the kernel or QEMU made it go away (a single printf made it half as reproducible). On the plus side, the failure mode (a hang until the next keypress) made it very easy to examine the state of the process with a debugger. And there was a very nice reproducer from Laszlo, which failed pretty often (more than half of the time) on any version of QEMU with a non-debug kernel; it also failed fast, while still in the firmware. So, it could have been worse. For some unknown reason they happened only with virtio-scsi, but that's not important. It's more interesting that they disappeared with io=native, making thread-pool.c a likely suspect for where the bug arose. thread-pool.c is also one of the few places which use bottom halves across threads, by the way. I hope that no other similar bugs exist, but just in case :) I am going to describe how the successful debugging went... Since the likely culprit was the ctx->dispatching optimization, which mostly affects bottom halves, the first observation was that there are two qemu_bh_schedule() invocations in the thread pool: the one in the aio worker and the one in thread_pool_completion_bh. The latter always causes the optimization to trigger, the former may or may not. In order to restrict the possibilities, I introduced new functions qemu_bh_schedule_slow() and qemu_bh_schedule_fast(): /* qemu_bh_schedule_slow: */ ctx = bh->ctx; bh->idle = 0; if (atomic_xchg(&bh->scheduled, 1) == 0) { event_notifier_set(&ctx->notifier); } /* qemu_bh_schedule_fast: */ ctx = bh->ctx; bh->idle = 0; assert(ctx->dispatching); atomic_xchg(&bh->scheduled, 1); Notice how the atomic_xchg is still in qemu_bh_schedule_slow(). This was already debated a few months ago, so I assumed it to be correct. In retrospect this was a very good idea, as you'll see later. Changing thread_pool_completion_bh() to qemu_bh_schedule_fast() didn't trigger the assertion (as expected). Changing the worker's invocation to qemu_bh_schedule_slow() didn't hide the bug (another assumption which luckily held). This already limited heavily the amount of interaction between the threads, hinting that the problematic events must have triggered around thread_pool_completion_bh(). As mentioned early, invoking a debugger to examine the state of a hung process was pretty easy; the iothread was always waiting on a poll(..., -1) system call. Infinite timeouts are much rarer on x86, and this could be the reason why the bug was never observed there. With the buggy sequence more or less resolved to an interaction between thread_pool_completion_bh() and poll(..., -1), my "tracing" strategy was to just add a few qemu_clock_get_ns(QEMU_CLOCK_REALTIME) calls, hoping that the ordering of aio_ctx_prepare(), aio_ctx_dispatch, poll() and qemu_bh_schedule_fast() would provide some hint. The output was: (gdb) p last_prepare $3 = 103885451 (gdb) p last_dispatch $4 = 103876492 (gdb) p last_poll $5 = 115909333 (gdb) p last_schedule $6 = 115925212 Notice how the last call to qemu_poll_ns() came after aio_ctx_dispatch(). This makes little sense unless there is an aio_poll() call involved, and indeed with a slightly different instrumentation you can see that there is one: (gdb) p last_prepare $3 = 107569679 (gdb) p last_dispatch $4 = 107561600 (gdb) p last_aio_poll $5 = 110671400 (gdb) p last_schedule $6 = 110698917 So the scenario becomes clearer: iothread VCPU thread -------------------------------------------------------------------------- aio_ctx_prepare aio_ctx_check qemu_poll_ns(timeout=-1) aio_poll aio_dispatch thread_pool_completion_bh qemu_bh_schedule() At this point bh->scheduled = 1 and the iothread has not been woken up. The solution must be close, but this alone should not be a problem, because the bottom half is only rescheduled to account for rare situations (see commit 3c80ca1, thread-pool: avoid deadlock in nested aio_poll() calls, 2014-07-15). Introducing a third thread---a thread pool worker thread, which also does qemu_bh_schedule()---does bring out the problematic case. The third thread must be awakened *after* the callback is complete and thread_pool_completion_bh has redone the whole loop, explaining the short race window. And then this is what happens: thread pool worker -------------------------------------------------------------------------- <I/O completes> qemu_bh_schedule() Tada, bh->scheduled is already 1, so qemu_bh_schedule() does nothing and the iothread is never woken up. This is where the bh->scheduled optimization comes into play---it is correct, but removing it would have masked the bug. So, what is the bug? Well, the question asked by the ctx->dispatching optimization ("is any active aio_poll dispatching?") was wrong. The right question to ask instead is "is any active aio_poll *not* dispatching", i.e. in the prepare or poll phases? In that case, the aio_poll is sleeping or might go to sleep anytime soon, and the EventNotifier must be invoked to wake it up. In any other case (including if there is *no* active aio_poll at all!) we can just wait for the next prepare phase to pick up the event (e.g. a bottom half); the prepare phase will avoid the blocking and service the bottom half. Expressing the invariant with a logic formula, the broken one looked like: !(exists(thread): in_dispatching(thread)) => !optimize or equivalently: !(exists(thread): in_aio_poll(thread) && in_dispatching(thread)) => !optimize In the correct one, the negation is in a slightly different place: (exists(thread): in_aio_poll(thread) && !in_dispatching(thread)) => !optimize or equivalently: (exists(thread): in_prepare_or_poll(thread)) => !optimize Even if the difference boils down to moving an exclamation mark :) the implementation is quite different. However, I think the new one is simpler to understand. In the old implementation, the "exists" was implemented with a boolean value. This didn't really support well the case of multiple concurrent event loops, but I thought that this was okay: aio_poll holds the AioContext lock so there cannot be concurrent aio_poll invocations, and I was just considering nested event loops. However, aio_poll _could_ indeed be concurrent with the GSource. This is why I came up with the wrong invariant. In the new implementation, "exists" is computed simply by counting how many threads are in the prepare or poll phases. There are some interesting points to consider, but the gist of the idea remains: 1) AioContext can be used through GSource as well; as mentioned in the patch, bit 0 of the counter is reserved for the GSource. 2) the counter need not be updated for a non-blocking aio_poll, because it won't sleep forever anyway. This is just a matter of checking the "blocking" variable. This requires some changes to the win32 implementation, but is otherwise not too complicated. 3) as mentioned above, the new implementation will not call aio_notify when there is *no* active aio_poll at all. The tests have to be adjusted for this change. The calls to aio_notify in async.c are fine; they only want to kick aio_poll out of a blocking wait, but need not do anything if aio_poll is not running. 4) nested aio_poll: these just work with the new implementation; when a nested event loop is invoked, the outer event loop is never in the prepare or poll phases. The outer event loop thus has already decremented the counter. Reported-by: Richard W. M. Jones <rjones@redhat.com> Reported-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Tested-by: Richard W.M. Jones <rjones@redhat.com> Message-id: 1437487673-23740-5-git-send-email-pbonzini@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-07-21 17:07:51 +03:00
*/
smp_mb();
if (qatomic_read(&ctx->notify_me)) {
event_notifier_set(&ctx->notifier);
}
}
void aio_notify_accept(AioContext *ctx)
{
qatomic_set(&ctx->notified, false);
/*
* Write ctx->notified before reading e.g. bh->flags. Pairs with smp_wmb
* in aio_notify.
*/
smp_mb();
}
static void aio_timerlist_notify(void *opaque, QEMUClockType type)
{
aio_notify(opaque);
}
static void aio_context_notifier_cb(EventNotifier *e)
AioContext: fix broken placement of event_notifier_test_and_clear event_notifier_test_and_clear must be called before processing events. Otherwise, an aio_poll could "eat" the notification before the main I/O thread invokes ppoll(). The main I/O thread then never wakes up. This is an example of what could happen: i/o thread vcpu thread worker thread --------------------------------------------------------------------- lock_iothread notify_me = 1 ... unlock_iothread bh->scheduled = 1 event_notifier_set lock_iothread notify_me = 3 ppoll notify_me = 1 aio_dispatch aio_bh_poll thread_pool_completion_bh bh->scheduled = 1 event_notifier_set node->io_read(node->opaque) event_notifier_test_and_clear ppoll *** hang *** "Tracing" with qemu_clock_get_ns shows pretty much the same behavior as in the previous bug, so there are no new tricks here---just stare more at the code until it is apparent. One could also use a formal model, of course. The included one shows this with three processes: notifier corresponds to a QEMU thread pool worker, temporary_waiter to a VCPU thread that invokes aio_poll(), waiter to the main I/O thread. I would be happy to say that the formal model found the bug for me, but actually I wrote it after the fact. This patch is a bit of a big hammer. The next one optimizes it, with help (this time for real rather than a posteriori :)) from another, similar formal model. Reported-by: Richard W. M. Jones <rjones@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Tested-by: Richard W.M. Jones <rjones@redhat.com> Message-id: 1437487673-23740-6-git-send-email-pbonzini@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-07-21 17:07:52 +03:00
{
AioContext *ctx = container_of(e, AioContext, notifier);
event_notifier_test_and_clear(&ctx->notifier);
AioContext: fix broken placement of event_notifier_test_and_clear event_notifier_test_and_clear must be called before processing events. Otherwise, an aio_poll could "eat" the notification before the main I/O thread invokes ppoll(). The main I/O thread then never wakes up. This is an example of what could happen: i/o thread vcpu thread worker thread --------------------------------------------------------------------- lock_iothread notify_me = 1 ... unlock_iothread bh->scheduled = 1 event_notifier_set lock_iothread notify_me = 3 ppoll notify_me = 1 aio_dispatch aio_bh_poll thread_pool_completion_bh bh->scheduled = 1 event_notifier_set node->io_read(node->opaque) event_notifier_test_and_clear ppoll *** hang *** "Tracing" with qemu_clock_get_ns shows pretty much the same behavior as in the previous bug, so there are no new tricks here---just stare more at the code until it is apparent. One could also use a formal model, of course. The included one shows this with three processes: notifier corresponds to a QEMU thread pool worker, temporary_waiter to a VCPU thread that invokes aio_poll(), waiter to the main I/O thread. I would be happy to say that the formal model found the bug for me, but actually I wrote it after the fact. This patch is a bit of a big hammer. The next one optimizes it, with help (this time for real rather than a posteriori :)) from another, similar formal model. Reported-by: Richard W. M. Jones <rjones@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Tested-by: Richard W.M. Jones <rjones@redhat.com> Message-id: 1437487673-23740-6-git-send-email-pbonzini@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-07-21 17:07:52 +03:00
}
aio: add polling mode to AioContext The AioContext event loop uses ppoll(2) or epoll_wait(2) to monitor file descriptors or until a timer expires. In cases like virtqueues, Linux AIO, and ThreadPool it is technically possible to wait for events via polling (i.e. continuously checking for events without blocking). Polling can be faster than blocking syscalls because file descriptors, the process scheduler, and system calls are bypassed. The main disadvantage to polling is that it increases CPU utilization. In classic polling configuration a full host CPU thread might run at 100% to respond to events as quickly as possible. This patch implements a timeout so we fall back to blocking syscalls if polling detects no activity. After the timeout no CPU cycles are wasted on polling until the next event loop iteration. The run_poll_handlers_begin() and run_poll_handlers_end() trace events are added to aid performance analysis and troubleshooting. If you need to know whether polling mode is being used, trace these events to find out. Note that the AioContext is now re-acquired before disabling notify_me in the non-polling case. This makes the code cleaner since notify_me was enabled outside the non-polling AioContext release region. This change is correct since it's safe to keep notify_me enabled longer (disabling is an optimization) but potentially causes unnecessary event_notifer_set() calls. I think the chance of performance regression is small here. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20161201192652.9509-4-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-12-01 22:26:42 +03:00
/* Returns true if aio_notify() was called (e.g. a BH was scheduled) */
static bool aio_context_notifier_poll(void *opaque)
aio: add polling mode to AioContext The AioContext event loop uses ppoll(2) or epoll_wait(2) to monitor file descriptors or until a timer expires. In cases like virtqueues, Linux AIO, and ThreadPool it is technically possible to wait for events via polling (i.e. continuously checking for events without blocking). Polling can be faster than blocking syscalls because file descriptors, the process scheduler, and system calls are bypassed. The main disadvantage to polling is that it increases CPU utilization. In classic polling configuration a full host CPU thread might run at 100% to respond to events as quickly as possible. This patch implements a timeout so we fall back to blocking syscalls if polling detects no activity. After the timeout no CPU cycles are wasted on polling until the next event loop iteration. The run_poll_handlers_begin() and run_poll_handlers_end() trace events are added to aid performance analysis and troubleshooting. If you need to know whether polling mode is being used, trace these events to find out. Note that the AioContext is now re-acquired before disabling notify_me in the non-polling case. This makes the code cleaner since notify_me was enabled outside the non-polling AioContext release region. This change is correct since it's safe to keep notify_me enabled longer (disabling is an optimization) but potentially causes unnecessary event_notifer_set() calls. I think the chance of performance regression is small here. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20161201192652.9509-4-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-12-01 22:26:42 +03:00
{
EventNotifier *e = opaque;
AioContext *ctx = container_of(e, AioContext, notifier);
return qatomic_read(&ctx->notified);
aio: add polling mode to AioContext The AioContext event loop uses ppoll(2) or epoll_wait(2) to monitor file descriptors or until a timer expires. In cases like virtqueues, Linux AIO, and ThreadPool it is technically possible to wait for events via polling (i.e. continuously checking for events without blocking). Polling can be faster than blocking syscalls because file descriptors, the process scheduler, and system calls are bypassed. The main disadvantage to polling is that it increases CPU utilization. In classic polling configuration a full host CPU thread might run at 100% to respond to events as quickly as possible. This patch implements a timeout so we fall back to blocking syscalls if polling detects no activity. After the timeout no CPU cycles are wasted on polling until the next event loop iteration. The run_poll_handlers_begin() and run_poll_handlers_end() trace events are added to aid performance analysis and troubleshooting. If you need to know whether polling mode is being used, trace these events to find out. Note that the AioContext is now re-acquired before disabling notify_me in the non-polling case. This makes the code cleaner since notify_me was enabled outside the non-polling AioContext release region. This change is correct since it's safe to keep notify_me enabled longer (disabling is an optimization) but potentially causes unnecessary event_notifer_set() calls. I think the chance of performance regression is small here. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20161201192652.9509-4-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-12-01 22:26:42 +03:00
}
aio-posix: split poll check from ready handler Adaptive polling measures the execution time of the polling check plus handlers called when a polled event becomes ready. Handlers can take a significant amount of time, making it look like polling was running for a long time when in fact the event handler was running for a long time. For example, on Linux the io_submit(2) syscall invoked when a virtio-blk device's virtqueue becomes ready can take 10s of microseconds. This can exceed the default polling interval (32 microseconds) and cause adaptive polling to stop polling. By excluding the handler's execution time from the polling check we make the adaptive polling calculation more accurate. As a result, the event loop now stays in polling mode where previously it would have fallen back to file descriptor monitoring. The following data was collected with virtio-blk num-queues=2 event_idx=off using an IOThread. Before: 168k IOPS, IOThread syscalls: 9837.115 ( 0.020 ms): IO iothread1/620155 io_submit(ctx_id: 140512552468480, nr: 16, iocbpp: 0x7fcb9f937db0) = 16 9837.158 ( 0.002 ms): IO iothread1/620155 write(fd: 103, buf: 0x556a2ef71b88, count: 8) = 8 9837.161 ( 0.001 ms): IO iothread1/620155 write(fd: 104, buf: 0x556a2ef71b88, count: 8) = 8 9837.163 ( 0.001 ms): IO iothread1/620155 ppoll(ufds: 0x7fcb90002800, nfds: 4, tsp: 0x7fcb9f1342d0, sigsetsize: 8) = 3 9837.164 ( 0.001 ms): IO iothread1/620155 read(fd: 107, buf: 0x7fcb9f939cc0, count: 512) = 8 9837.174 ( 0.001 ms): IO iothread1/620155 read(fd: 105, buf: 0x7fcb9f939cc0, count: 512) = 8 9837.176 ( 0.001 ms): IO iothread1/620155 read(fd: 106, buf: 0x7fcb9f939cc0, count: 512) = 8 9837.209 ( 0.035 ms): IO iothread1/620155 io_submit(ctx_id: 140512552468480, nr: 32, iocbpp: 0x7fca7d0cebe0) = 32 174k IOPS (+3.6%), IOThread syscalls: 9809.566 ( 0.036 ms): IO iothread1/623061 io_submit(ctx_id: 140539805028352, nr: 32, iocbpp: 0x7fd0cdd62be0) = 32 9809.625 ( 0.001 ms): IO iothread1/623061 write(fd: 103, buf: 0x5647cfba5f58, count: 8) = 8 9809.627 ( 0.002 ms): IO iothread1/623061 write(fd: 104, buf: 0x5647cfba5f58, count: 8) = 8 9809.663 ( 0.036 ms): IO iothread1/623061 io_submit(ctx_id: 140539805028352, nr: 32, iocbpp: 0x7fd0d0388b50) = 32 Notice that ppoll(2) and eventfd read(2) syscalls are eliminated because the IOThread stays in polling mode instead of falling back to file descriptor monitoring. As usual, polling is not implemented on Windows so this patch ignores the new io_poll_read() callback in aio-win32.c. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Message-id: 20211207132336.36627-2-stefanha@redhat.com [Fixed up aio_set_event_notifier() calls in tests/unit/test-fdmon-epoll.c added after this series was queued. --Stefan] Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-12-07 16:23:31 +03:00
static void aio_context_notifier_poll_ready(EventNotifier *e)
{
/* Do nothing, we just wanted to kick the event loop */
}
static void co_schedule_bh_cb(void *opaque)
{
AioContext *ctx = opaque;
QSLIST_HEAD(, Coroutine) straight, reversed;
QSLIST_MOVE_ATOMIC(&reversed, &ctx->scheduled_coroutines);
QSLIST_INIT(&straight);
while (!QSLIST_EMPTY(&reversed)) {
Coroutine *co = QSLIST_FIRST(&reversed);
QSLIST_REMOVE_HEAD(&reversed, co_scheduled_next);
QSLIST_INSERT_HEAD(&straight, co, co_scheduled_next);
}
while (!QSLIST_EMPTY(&straight)) {
Coroutine *co = QSLIST_FIRST(&straight);
QSLIST_REMOVE_HEAD(&straight, co_scheduled_next);
trace_aio_co_schedule_bh_cb(ctx, co);
aio_context_acquire(ctx);
/* Protected by write barrier in qemu_aio_coroutine_enter */
qatomic_set(&co->scheduled, NULL);
util/async: use qemu_aio_coroutine_enter in co_schedule_bh_cb AIO Coroutines shouldn't by managed by an AioContext different than the one assigned when they are created. aio_co_enter avoids entering a coroutine from a different AioContext, calling aio_co_schedule instead. Scheduled coroutines are then entered by co_schedule_bh_cb using qemu_coroutine_enter, which just calls qemu_aio_coroutine_enter with the current AioContext obtained with qemu_get_current_aio_context. Eventually, co->ctx will be set to the AioContext passed as an argument to qemu_aio_coroutine_enter. This means that, if an IO Thread's AioConext is being processed by the Main Thread (due to aio_poll being called with a BDS AioContext, as it happens in AIO_WAIT_WHILE among other places), the AioContext from some coroutines may be wrongly replaced with the one from the Main Thread. This is the root cause behind some crashes, mainly triggered by the drain code at block/io.c. The most common are these abort and failed assertion: util/async.c:aio_co_schedule 456 if (scheduled) { 457 fprintf(stderr, 458 "%s: Co-routine was already scheduled in '%s'\n", 459 __func__, scheduled); 460 abort(); 461 } util/qemu-coroutine-lock.c: 286 assert(mutex->holder == self); But it's also known to cause random errors at different locations, and even SIGSEGV with broken coroutine backtraces. By using qemu_aio_coroutine_enter directly in co_schedule_bh_cb, we can pass the correct AioContext as an argument, making sure co->ctx is not wrongly altered. Signed-off-by: Sergio Lopez <slp@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-09-05 12:33:51 +03:00
qemu_aio_coroutine_enter(ctx, co);
aio_context_release(ctx);
}
}
AioContext *aio_context_new(Error **errp)
{
int ret;
AioContext *ctx;
ctx = (AioContext *) g_source_new(&aio_source_funcs, sizeof(AioContext));
QSLIST_INIT(&ctx->bh_list);
QSIMPLEQ_INIT(&ctx->bh_slice_list);
aio_context_setup(ctx);
ret = event_notifier_init(&ctx->notifier, false);
if (ret < 0) {
error_setg_errno(errp, -ret, "Failed to initialize event notifier");
goto fail;
}
g_source_set_can_recurse(&ctx->source, true);
qemu_lockcnt_init(&ctx->list_lock);
ctx->co_schedule_bh = aio_bh_new(ctx, co_schedule_bh_cb, ctx);
QSLIST_INIT(&ctx->scheduled_coroutines);
aio_set_event_notifier(ctx, &ctx->notifier,
false,
aio_context_notifier_cb,
aio-posix: split poll check from ready handler Adaptive polling measures the execution time of the polling check plus handlers called when a polled event becomes ready. Handlers can take a significant amount of time, making it look like polling was running for a long time when in fact the event handler was running for a long time. For example, on Linux the io_submit(2) syscall invoked when a virtio-blk device's virtqueue becomes ready can take 10s of microseconds. This can exceed the default polling interval (32 microseconds) and cause adaptive polling to stop polling. By excluding the handler's execution time from the polling check we make the adaptive polling calculation more accurate. As a result, the event loop now stays in polling mode where previously it would have fallen back to file descriptor monitoring. The following data was collected with virtio-blk num-queues=2 event_idx=off using an IOThread. Before: 168k IOPS, IOThread syscalls: 9837.115 ( 0.020 ms): IO iothread1/620155 io_submit(ctx_id: 140512552468480, nr: 16, iocbpp: 0x7fcb9f937db0) = 16 9837.158 ( 0.002 ms): IO iothread1/620155 write(fd: 103, buf: 0x556a2ef71b88, count: 8) = 8 9837.161 ( 0.001 ms): IO iothread1/620155 write(fd: 104, buf: 0x556a2ef71b88, count: 8) = 8 9837.163 ( 0.001 ms): IO iothread1/620155 ppoll(ufds: 0x7fcb90002800, nfds: 4, tsp: 0x7fcb9f1342d0, sigsetsize: 8) = 3 9837.164 ( 0.001 ms): IO iothread1/620155 read(fd: 107, buf: 0x7fcb9f939cc0, count: 512) = 8 9837.174 ( 0.001 ms): IO iothread1/620155 read(fd: 105, buf: 0x7fcb9f939cc0, count: 512) = 8 9837.176 ( 0.001 ms): IO iothread1/620155 read(fd: 106, buf: 0x7fcb9f939cc0, count: 512) = 8 9837.209 ( 0.035 ms): IO iothread1/620155 io_submit(ctx_id: 140512552468480, nr: 32, iocbpp: 0x7fca7d0cebe0) = 32 174k IOPS (+3.6%), IOThread syscalls: 9809.566 ( 0.036 ms): IO iothread1/623061 io_submit(ctx_id: 140539805028352, nr: 32, iocbpp: 0x7fd0cdd62be0) = 32 9809.625 ( 0.001 ms): IO iothread1/623061 write(fd: 103, buf: 0x5647cfba5f58, count: 8) = 8 9809.627 ( 0.002 ms): IO iothread1/623061 write(fd: 104, buf: 0x5647cfba5f58, count: 8) = 8 9809.663 ( 0.036 ms): IO iothread1/623061 io_submit(ctx_id: 140539805028352, nr: 32, iocbpp: 0x7fd0d0388b50) = 32 Notice that ppoll(2) and eventfd read(2) syscalls are eliminated because the IOThread stays in polling mode instead of falling back to file descriptor monitoring. As usual, polling is not implemented on Windows so this patch ignores the new io_poll_read() callback in aio-win32.c. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Message-id: 20211207132336.36627-2-stefanha@redhat.com [Fixed up aio_set_event_notifier() calls in tests/unit/test-fdmon-epoll.c added after this series was queued. --Stefan] Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-12-07 16:23:31 +03:00
aio_context_notifier_poll,
aio_context_notifier_poll_ready);
#ifdef CONFIG_LINUX_AIO
ctx->linux_aio = NULL;
#endif
#ifdef CONFIG_LINUX_IO_URING
ctx->linux_io_uring = NULL;
#endif
ctx->thread_pool = NULL;
qemu_rec_mutex_init(&ctx->lock);
timerlistgroup_init(&ctx->tlg, aio_timerlist_notify, ctx);
ctx->poll_ns = 0;
aio: add polling mode to AioContext The AioContext event loop uses ppoll(2) or epoll_wait(2) to monitor file descriptors or until a timer expires. In cases like virtqueues, Linux AIO, and ThreadPool it is technically possible to wait for events via polling (i.e. continuously checking for events without blocking). Polling can be faster than blocking syscalls because file descriptors, the process scheduler, and system calls are bypassed. The main disadvantage to polling is that it increases CPU utilization. In classic polling configuration a full host CPU thread might run at 100% to respond to events as quickly as possible. This patch implements a timeout so we fall back to blocking syscalls if polling detects no activity. After the timeout no CPU cycles are wasted on polling until the next event loop iteration. The run_poll_handlers_begin() and run_poll_handlers_end() trace events are added to aid performance analysis and troubleshooting. If you need to know whether polling mode is being used, trace these events to find out. Note that the AioContext is now re-acquired before disabling notify_me in the non-polling case. This makes the code cleaner since notify_me was enabled outside the non-polling AioContext release region. This change is correct since it's safe to keep notify_me enabled longer (disabling is an optimization) but potentially causes unnecessary event_notifer_set() calls. I think the chance of performance regression is small here. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20161201192652.9509-4-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-12-01 22:26:42 +03:00
ctx->poll_max_ns = 0;
ctx->poll_grow = 0;
ctx->poll_shrink = 0;
aio: add polling mode to AioContext The AioContext event loop uses ppoll(2) or epoll_wait(2) to monitor file descriptors or until a timer expires. In cases like virtqueues, Linux AIO, and ThreadPool it is technically possible to wait for events via polling (i.e. continuously checking for events without blocking). Polling can be faster than blocking syscalls because file descriptors, the process scheduler, and system calls are bypassed. The main disadvantage to polling is that it increases CPU utilization. In classic polling configuration a full host CPU thread might run at 100% to respond to events as quickly as possible. This patch implements a timeout so we fall back to blocking syscalls if polling detects no activity. After the timeout no CPU cycles are wasted on polling until the next event loop iteration. The run_poll_handlers_begin() and run_poll_handlers_end() trace events are added to aid performance analysis and troubleshooting. If you need to know whether polling mode is being used, trace these events to find out. Note that the AioContext is now re-acquired before disabling notify_me in the non-polling case. This makes the code cleaner since notify_me was enabled outside the non-polling AioContext release region. This change is correct since it's safe to keep notify_me enabled longer (disabling is an optimization) but potentially causes unnecessary event_notifer_set() calls. I think the chance of performance regression is small here. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20161201192652.9509-4-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-12-01 22:26:42 +03:00
ctx->aio_max_batch = 0;
ctx->thread_pool_min = 0;
ctx->thread_pool_max = THREAD_POOL_MAX_THREADS_DEFAULT;
return ctx;
fail:
g_source_destroy(&ctx->source);
return NULL;
}
void aio_co_schedule(AioContext *ctx, Coroutine *co)
{
trace_aio_co_schedule(ctx, co);
const char *scheduled = qatomic_cmpxchg(&co->scheduled, NULL,
__func__);
if (scheduled) {
fprintf(stderr,
"%s: Co-routine was already scheduled in '%s'\n",
__func__, scheduled);
abort();
}
/* The coroutine might run and release the last ctx reference before we
* invoke qemu_bh_schedule(). Take a reference to keep ctx alive until
* we're done.
*/
aio_context_ref(ctx);
QSLIST_INSERT_HEAD_ATOMIC(&ctx->scheduled_coroutines,
co, co_scheduled_next);
qemu_bh_schedule(ctx->co_schedule_bh);
aio_context_unref(ctx);
}
typedef struct AioCoRescheduleSelf {
Coroutine *co;
AioContext *new_ctx;
} AioCoRescheduleSelf;
static void aio_co_reschedule_self_bh(void *opaque)
{
AioCoRescheduleSelf *data = opaque;
aio_co_schedule(data->new_ctx, data->co);
}
void coroutine_fn aio_co_reschedule_self(AioContext *new_ctx)
{
AioContext *old_ctx = qemu_get_current_aio_context();
if (old_ctx != new_ctx) {
AioCoRescheduleSelf data = {
.co = qemu_coroutine_self(),
.new_ctx = new_ctx,
};
/*
* We can't directly schedule the coroutine in the target context
* because this would be racy: The other thread could try to enter the
* coroutine before it has yielded in this one.
*/
aio_bh_schedule_oneshot(old_ctx, aio_co_reschedule_self_bh, &data);
qemu_coroutine_yield();
}
}
void aio_co_wake(struct Coroutine *co)
{
AioContext *ctx;
/* Read coroutine before co->ctx. Matches smp_wmb in
* qemu_coroutine_enter.
*/
smp_read_barrier_depends();
ctx = qatomic_read(&co->ctx);
aio_co_enter(ctx, co);
}
void aio_co_enter(AioContext *ctx, struct Coroutine *co)
{
if (ctx != qemu_get_current_aio_context()) {
aio_co_schedule(ctx, co);
return;
}
if (qemu_in_coroutine()) {
Coroutine *self = qemu_coroutine_self();
assert(self != co);
QSIMPLEQ_INSERT_TAIL(&self->co_queue_wakeup, co, co_queue_next);
} else {
aio_context_acquire(ctx);
qemu_aio_coroutine_enter(ctx, co);
aio_context_release(ctx);
}
}
void aio_context_ref(AioContext *ctx)
{
g_source_ref(&ctx->source);
}
void aio_context_unref(AioContext *ctx)
{
g_source_unref(&ctx->source);
}
void aio_context_acquire(AioContext *ctx)
{
qemu_rec_mutex_lock(&ctx->lock);
}
void aio_context_release(AioContext *ctx)
{
qemu_rec_mutex_unlock(&ctx->lock);
}
async: the main AioContext is only "current" if under the BQL If we want to wake up a coroutine from a worker thread, aio_co_wake() currently does not work. In that scenario, aio_co_wake() calls aio_co_enter(), but there is no current AioContext and therefore qemu_get_current_aio_context() returns the main thread. aio_co_wake() then attempts to call aio_context_acquire() instead of going through aio_co_schedule(). The default case of qemu_get_current_aio_context() was added to cover synchronous I/O started from the vCPU thread, but the main and vCPU threads are quite different. The main thread is an I/O thread itself, only running a more complicated event loop; the vCPU thread instead is essentially a worker thread that occasionally calls qemu_mutex_lock_iothread(). It is only in those critical sections that it acts as if it were the home thread of the main AioContext. Therefore, this patch detaches qemu_get_current_aio_context() from iothreads, which is a useless complication. The AioContext pointer is stored directly in the thread-local variable, including for the main loop. Worker threads (including vCPU threads) optionally behave as temporary home threads if they have taken the big QEMU lock, but if that is not the case they will always schedule coroutines on remote threads via aio_co_schedule(). With this change, the stub qemu_mutex_iothread_locked() must be changed from true to false. The previous value of true was needed because the main thread did not have an AioContext in the thread-local variable, but now it does have one. Reported-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20210609122234.544153-1-pbonzini@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Tested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> [eblake: tweak commit message per Vladimir's review] Signed-off-by: Eric Blake <eblake@redhat.com>
2021-06-09 15:22:34 +03:00
QEMU_DEFINE_STATIC_CO_TLS(AioContext *, my_aiocontext)
async: the main AioContext is only "current" if under the BQL If we want to wake up a coroutine from a worker thread, aio_co_wake() currently does not work. In that scenario, aio_co_wake() calls aio_co_enter(), but there is no current AioContext and therefore qemu_get_current_aio_context() returns the main thread. aio_co_wake() then attempts to call aio_context_acquire() instead of going through aio_co_schedule(). The default case of qemu_get_current_aio_context() was added to cover synchronous I/O started from the vCPU thread, but the main and vCPU threads are quite different. The main thread is an I/O thread itself, only running a more complicated event loop; the vCPU thread instead is essentially a worker thread that occasionally calls qemu_mutex_lock_iothread(). It is only in those critical sections that it acts as if it were the home thread of the main AioContext. Therefore, this patch detaches qemu_get_current_aio_context() from iothreads, which is a useless complication. The AioContext pointer is stored directly in the thread-local variable, including for the main loop. Worker threads (including vCPU threads) optionally behave as temporary home threads if they have taken the big QEMU lock, but if that is not the case they will always schedule coroutines on remote threads via aio_co_schedule(). With this change, the stub qemu_mutex_iothread_locked() must be changed from true to false. The previous value of true was needed because the main thread did not have an AioContext in the thread-local variable, but now it does have one. Reported-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20210609122234.544153-1-pbonzini@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Tested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> [eblake: tweak commit message per Vladimir's review] Signed-off-by: Eric Blake <eblake@redhat.com>
2021-06-09 15:22:34 +03:00
AioContext *qemu_get_current_aio_context(void)
{
AioContext *ctx = get_my_aiocontext();
if (ctx) {
return ctx;
async: the main AioContext is only "current" if under the BQL If we want to wake up a coroutine from a worker thread, aio_co_wake() currently does not work. In that scenario, aio_co_wake() calls aio_co_enter(), but there is no current AioContext and therefore qemu_get_current_aio_context() returns the main thread. aio_co_wake() then attempts to call aio_context_acquire() instead of going through aio_co_schedule(). The default case of qemu_get_current_aio_context() was added to cover synchronous I/O started from the vCPU thread, but the main and vCPU threads are quite different. The main thread is an I/O thread itself, only running a more complicated event loop; the vCPU thread instead is essentially a worker thread that occasionally calls qemu_mutex_lock_iothread(). It is only in those critical sections that it acts as if it were the home thread of the main AioContext. Therefore, this patch detaches qemu_get_current_aio_context() from iothreads, which is a useless complication. The AioContext pointer is stored directly in the thread-local variable, including for the main loop. Worker threads (including vCPU threads) optionally behave as temporary home threads if they have taken the big QEMU lock, but if that is not the case they will always schedule coroutines on remote threads via aio_co_schedule(). With this change, the stub qemu_mutex_iothread_locked() must be changed from true to false. The previous value of true was needed because the main thread did not have an AioContext in the thread-local variable, but now it does have one. Reported-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20210609122234.544153-1-pbonzini@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Tested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> [eblake: tweak commit message per Vladimir's review] Signed-off-by: Eric Blake <eblake@redhat.com>
2021-06-09 15:22:34 +03:00
}
if (qemu_mutex_iothread_locked()) {
/* Possibly in a vCPU thread. */
return qemu_get_aio_context();
}
return NULL;
}
void qemu_set_current_aio_context(AioContext *ctx)
{
assert(!get_my_aiocontext());
set_my_aiocontext(ctx);
async: the main AioContext is only "current" if under the BQL If we want to wake up a coroutine from a worker thread, aio_co_wake() currently does not work. In that scenario, aio_co_wake() calls aio_co_enter(), but there is no current AioContext and therefore qemu_get_current_aio_context() returns the main thread. aio_co_wake() then attempts to call aio_context_acquire() instead of going through aio_co_schedule(). The default case of qemu_get_current_aio_context() was added to cover synchronous I/O started from the vCPU thread, but the main and vCPU threads are quite different. The main thread is an I/O thread itself, only running a more complicated event loop; the vCPU thread instead is essentially a worker thread that occasionally calls qemu_mutex_lock_iothread(). It is only in those critical sections that it acts as if it were the home thread of the main AioContext. Therefore, this patch detaches qemu_get_current_aio_context() from iothreads, which is a useless complication. The AioContext pointer is stored directly in the thread-local variable, including for the main loop. Worker threads (including vCPU threads) optionally behave as temporary home threads if they have taken the big QEMU lock, but if that is not the case they will always schedule coroutines on remote threads via aio_co_schedule(). With this change, the stub qemu_mutex_iothread_locked() must be changed from true to false. The previous value of true was needed because the main thread did not have an AioContext in the thread-local variable, but now it does have one. Reported-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20210609122234.544153-1-pbonzini@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Tested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> [eblake: tweak commit message per Vladimir's review] Signed-off-by: Eric Blake <eblake@redhat.com>
2021-06-09 15:22:34 +03:00
}
void aio_context_set_thread_pool_params(AioContext *ctx, int64_t min,
int64_t max, Error **errp)
{
if (min > max || !max || min > INT_MAX || max > INT_MAX) {
error_setg(errp, "bad thread-pool-min/thread-pool-max values");
return;
}
ctx->thread_pool_min = min;
ctx->thread_pool_max = max;
if (ctx->thread_pool) {
thread_pool_update_params(ctx->thread_pool, ctx);
}
}