mirrors/qemu
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
9681f8677f
qemu/include/hw/riscv/microchip_pfsoc.h

151 lines
4.6 KiB
C
Raw Normal View History

hw/riscv: Initial support for Microchip PolarFire SoC Icicle Kit board This is an initial support for Microchip PolarFire SoC Icicle Kit. The Icicle Kit board integrates a PolarFire SoC, with one SiFive's E51 plus four U54 cores and many on-chip peripherals and an FPGA. For more details about Microchip PolarFire Soc, please see: https://www.microsemi.com/product-directory/soc-fpgas/5498-polarfire-soc-fpga Unlike SiFive FU540, the RISC-V core resect vector is at 0x20220000. The following perepherals are created as an unimplemented device: - Bus Error Uint 0/1/2/3/4 - L2 cache controller - SYSREG - MPUCFG - IOSCBCFG More devices will be added later. The BIOS image used by this machine is hss.bin, aka Hart Software Services, which can be built from: https://github.com/polarfire-soc/hart-software-services To launch this machine: $ qemu-system-riscv64 -nographic -M microchip-icicle-kit The memory is set to 1 GiB by default to match the hardware. A sanity check on ram size is performed in the machine init routine to prompt user to increase the RAM size to > 1 GiB when less than 1 GiB ram is detected. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-5-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-01 04:38:59 +03:00
/*
* Microchip PolarFire SoC machine interface
*
* Copyright (c) 2020 Wind River Systems, Inc.
*
* Author:
* Bin Meng <bin.meng@windriver.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2 or later, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef HW_MICROCHIP_PFSOC_H
#define HW_MICROCHIP_PFSOC_H
hw/riscv: microchip_pfsoc: Connect 5 MMUARTs Microchip PolarFire SoC has 5 MMUARTs, and the Icicle Kit board wires 4 of them out. Let's connect all 5 MMUARTs. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-7-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-01 04:39:01 +03:00
#include "hw/char/mchp_pfsoc_mmuart.h"
hw/riscv: microchip_pfsoc: Connect a DMA controller On the Icicle Kit board, the HSS firmware utilizes the on-chip DMA controller to move the 2nd stage bootloader in the system memory. Let's connect a DMA controller to Microchip PolarFire SoC. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-11-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-01 04:39:05 +03:00
#include "hw/dma/sifive_pdma.h"
hw/riscv: microchip_pfsoc: Connect DDR memory controller modules Connect DDR SGMII PHY module and CFG module to the PolarFire SoC. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1603863010-15807-4-git-send-email-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-10-28 08:30:03 +03:00
#include "hw/misc/mchp_pfsoc_dmc.h"
hw/riscv: microchip_pfsoc: Connect the IOSCB module Previously IOSCB_CFG was created as an unimplemented device. With the new IOSCB model, its memory range is already covered by the IOSCB hence remove the previous unimplemented device creation in the SoC codes. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1603863010-15807-6-git-send-email-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-10-28 08:30:05 +03:00
#include "hw/misc/mchp_pfsoc_ioscb.h"
hw/riscv: microchip_pfsoc: Connect the SYSREG module Previously SYSREG was created as an unimplemented device. Now that we have a simple SYSREG module, connect it. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1603863010-15807-8-git-send-email-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-10-28 08:30:07 +03:00
#include "hw/misc/mchp_pfsoc_sysreg.h"
hw/riscv: microchip_pfsoc: Connect 2 Cadence GEMs Microchip PolarFire SoC integrates 2 Candence GEMs to provide IEEE 802.3 standard-compliant 10/100/1000 Mbps ethernet interface. On the Icicle Kit board, GEM0 connects to a PHY at address 8 while GEM1 connects to a PHY at address 9. The 2nd stage bootloader (U-Boot) is using GEM1 by default, so we must specify 2 '-nic' options from the command line in order to get a working ethernet. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <1598924352-89526-14-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-01 04:39:08 +03:00
#include "hw/net/cadence_gem.h"
hw/riscv: microchip_pfsoc: Connect a Cadence SDHCI controller and an SD card Microchip PolarFire SoC integrates one Cadence SDHCI controller. On the Icicle Kit board, one eMMC chip and an external SD card connect to this controller depending on different configuration. As QEMU does not support eMMC yet, we just emulate the SD card configuration. To test this, the Hart Software Services (HSS) should choose the SD card configuration: $ cp boards/icicle-kit-es/def_config.sdcard .config $ make BOARD=icicle-kit-es The SD card image can be built from the Yocto BSP at: https://github.com/polarfire-soc/meta-polarfire-soc-yocto-bsp Note the generated SD card image should be resized before use: $ qemu-img resize /path/to/sdcard.img 4G Launch QEMU with the following command: $ qemu-system-riscv64 -nographic -M microchip-icicle-kit -sd sdcard.img Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-9-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-01 04:39:03 +03:00
#include "hw/sd/cadence_sdhci.h"
hw/riscv: microchip_pfsoc: Connect 5 MMUARTs Microchip PolarFire SoC has 5 MMUARTs, and the Icicle Kit board wires 4 of them out. Let's connect all 5 MMUARTs. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-7-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-01 04:39:01 +03:00
hw/riscv: Initial support for Microchip PolarFire SoC Icicle Kit board This is an initial support for Microchip PolarFire SoC Icicle Kit. The Icicle Kit board integrates a PolarFire SoC, with one SiFive's E51 plus four U54 cores and many on-chip peripherals and an FPGA. For more details about Microchip PolarFire Soc, please see: https://www.microsemi.com/product-directory/soc-fpgas/5498-polarfire-soc-fpga Unlike SiFive FU540, the RISC-V core resect vector is at 0x20220000. The following perepherals are created as an unimplemented device: - Bus Error Uint 0/1/2/3/4 - L2 cache controller - SYSREG - MPUCFG - IOSCBCFG More devices will be added later. The BIOS image used by this machine is hss.bin, aka Hart Software Services, which can be built from: https://github.com/polarfire-soc/hart-software-services To launch this machine: $ qemu-system-riscv64 -nographic -M microchip-icicle-kit The memory is set to 1 GiB by default to match the hardware. A sanity check on ram size is performed in the machine init routine to prompt user to increase the RAM size to > 1 GiB when less than 1 GiB ram is detected. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-5-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-01 04:38:59 +03:00
typedef struct MicrochipPFSoCState {
/*< private >*/
DeviceState parent_obj;
/*< public >*/
CPUClusterState e_cluster;
CPUClusterState u_cluster;
RISCVHartArrayState e_cpus;
RISCVHartArrayState u_cpus;
DeviceState *plic;
hw/riscv: microchip_pfsoc: Connect DDR memory controller modules Connect DDR SGMII PHY module and CFG module to the PolarFire SoC. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1603863010-15807-4-git-send-email-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-10-28 08:30:03 +03:00
MchpPfSoCDdrSgmiiPhyState ddr_sgmii_phy;
MchpPfSoCDdrCfgState ddr_cfg;
hw/riscv: microchip_pfsoc: Connect the IOSCB module Previously IOSCB_CFG was created as an unimplemented device. With the new IOSCB model, its memory range is already covered by the IOSCB hence remove the previous unimplemented device creation in the SoC codes. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1603863010-15807-6-git-send-email-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-10-28 08:30:05 +03:00
MchpPfSoCIoscbState ioscb;
hw/riscv: microchip_pfsoc: Connect 5 MMUARTs Microchip PolarFire SoC has 5 MMUARTs, and the Icicle Kit board wires 4 of them out. Let's connect all 5 MMUARTs. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-7-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-01 04:39:01 +03:00
MchpPfSoCMMUartState *serial0;
MchpPfSoCMMUartState *serial1;
MchpPfSoCMMUartState *serial2;
MchpPfSoCMMUartState *serial3;
MchpPfSoCMMUartState *serial4;
hw/riscv: microchip_pfsoc: Connect the SYSREG module Previously SYSREG was created as an unimplemented device. Now that we have a simple SYSREG module, connect it. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1603863010-15807-8-git-send-email-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-10-28 08:30:07 +03:00
MchpPfSoCSysregState sysreg;
hw/riscv: microchip_pfsoc: Connect a DMA controller On the Icicle Kit board, the HSS firmware utilizes the on-chip DMA controller to move the 2nd stage bootloader in the system memory. Let's connect a DMA controller to Microchip PolarFire SoC. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-11-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-01 04:39:05 +03:00
SiFivePDMAState dma;
hw/riscv: microchip_pfsoc: Connect 2 Cadence GEMs Microchip PolarFire SoC integrates 2 Candence GEMs to provide IEEE 802.3 standard-compliant 10/100/1000 Mbps ethernet interface. On the Icicle Kit board, GEM0 connects to a PHY at address 8 while GEM1 connects to a PHY at address 9. The 2nd stage bootloader (U-Boot) is using GEM1 by default, so we must specify 2 '-nic' options from the command line in order to get a working ethernet. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <1598924352-89526-14-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-01 04:39:08 +03:00
CadenceGEMState gem0;
CadenceGEMState gem1;
hw/riscv: microchip_pfsoc: Connect a Cadence SDHCI controller and an SD card Microchip PolarFire SoC integrates one Cadence SDHCI controller. On the Icicle Kit board, one eMMC chip and an external SD card connect to this controller depending on different configuration. As QEMU does not support eMMC yet, we just emulate the SD card configuration. To test this, the Hart Software Services (HSS) should choose the SD card configuration: $ cp boards/icicle-kit-es/def_config.sdcard .config $ make BOARD=icicle-kit-es The SD card image can be built from the Yocto BSP at: https://github.com/polarfire-soc/meta-polarfire-soc-yocto-bsp Note the generated SD card image should be resized before use: $ qemu-img resize /path/to/sdcard.img 4G Launch QEMU with the following command: $ qemu-system-riscv64 -nographic -M microchip-icicle-kit -sd sdcard.img Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-9-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-01 04:39:03 +03:00
CadenceSDHCIState sdhci;
hw/riscv: Initial support for Microchip PolarFire SoC Icicle Kit board This is an initial support for Microchip PolarFire SoC Icicle Kit. The Icicle Kit board integrates a PolarFire SoC, with one SiFive's E51 plus four U54 cores and many on-chip peripherals and an FPGA. For more details about Microchip PolarFire Soc, please see: https://www.microsemi.com/product-directory/soc-fpgas/5498-polarfire-soc-fpga Unlike SiFive FU540, the RISC-V core resect vector is at 0x20220000. The following perepherals are created as an unimplemented device: - Bus Error Uint 0/1/2/3/4 - L2 cache controller - SYSREG - MPUCFG - IOSCBCFG More devices will be added later. The BIOS image used by this machine is hss.bin, aka Hart Software Services, which can be built from: https://github.com/polarfire-soc/hart-software-services To launch this machine: $ qemu-system-riscv64 -nographic -M microchip-icicle-kit The memory is set to 1 GiB by default to match the hardware. A sanity check on ram size is performed in the machine init routine to prompt user to increase the RAM size to > 1 GiB when less than 1 GiB ram is detected. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-5-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-01 04:38:59 +03:00
} MicrochipPFSoCState;
#define TYPE_MICROCHIP_PFSOC "microchip.pfsoc"
#define MICROCHIP_PFSOC(obj) \
OBJECT_CHECK(MicrochipPFSoCState, (obj), TYPE_MICROCHIP_PFSOC)
typedef struct MicrochipIcicleKitState {
/*< private >*/
MachineState parent_obj;
/*< public >*/
MicrochipPFSoCState soc;
} MicrochipIcicleKitState;
#define TYPE_MICROCHIP_ICICLE_KIT_MACHINE \
MACHINE_TYPE_NAME("microchip-icicle-kit")
#define MICROCHIP_ICICLE_KIT_MACHINE(obj) \
OBJECT_CHECK(MicrochipIcicleKitState, (obj), \
TYPE_MICROCHIP_ICICLE_KIT_MACHINE)
enum {
hw/riscv: microchip_pfsoc: Map the reserved memory at address 0 Somehow HSS needs to access address 0 [1] for the DDR calibration data which is in the chipset's reserved memory. Let's map it. [1] See the config_copy() calls in various places in ddr_setup() in the HSS source codes. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1603863010-15807-9-git-send-email-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-10-28 08:30:08 +03:00
MICROCHIP_PFSOC_RSVD0,
hw/riscv: Initial support for Microchip PolarFire SoC Icicle Kit board This is an initial support for Microchip PolarFire SoC Icicle Kit. The Icicle Kit board integrates a PolarFire SoC, with one SiFive's E51 plus four U54 cores and many on-chip peripherals and an FPGA. For more details about Microchip PolarFire Soc, please see: https://www.microsemi.com/product-directory/soc-fpgas/5498-polarfire-soc-fpga Unlike SiFive FU540, the RISC-V core resect vector is at 0x20220000. The following perepherals are created as an unimplemented device: - Bus Error Uint 0/1/2/3/4 - L2 cache controller - SYSREG - MPUCFG - IOSCBCFG More devices will be added later. The BIOS image used by this machine is hss.bin, aka Hart Software Services, which can be built from: https://github.com/polarfire-soc/hart-software-services To launch this machine: $ qemu-system-riscv64 -nographic -M microchip-icicle-kit The memory is set to 1 GiB by default to match the hardware. A sanity check on ram size is performed in the machine init routine to prompt user to increase the RAM size to > 1 GiB when less than 1 GiB ram is detected. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-5-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-01 04:38:59 +03:00
MICROCHIP_PFSOC_DEBUG,
MICROCHIP_PFSOC_E51_DTIM,
MICROCHIP_PFSOC_BUSERR_UNIT0,
MICROCHIP_PFSOC_BUSERR_UNIT1,
MICROCHIP_PFSOC_BUSERR_UNIT2,
MICROCHIP_PFSOC_BUSERR_UNIT3,
MICROCHIP_PFSOC_BUSERR_UNIT4,
MICROCHIP_PFSOC_CLINT,
MICROCHIP_PFSOC_L2CC,
hw/riscv: microchip_pfsoc: Connect a DMA controller On the Icicle Kit board, the HSS firmware utilizes the on-chip DMA controller to move the 2nd stage bootloader in the system memory. Let's connect a DMA controller to Microchip PolarFire SoC. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-11-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-01 04:39:05 +03:00
MICROCHIP_PFSOC_DMA,
hw/riscv: Initial support for Microchip PolarFire SoC Icicle Kit board This is an initial support for Microchip PolarFire SoC Icicle Kit. The Icicle Kit board integrates a PolarFire SoC, with one SiFive's E51 plus four U54 cores and many on-chip peripherals and an FPGA. For more details about Microchip PolarFire Soc, please see: https://www.microsemi.com/product-directory/soc-fpgas/5498-polarfire-soc-fpga Unlike SiFive FU540, the RISC-V core resect vector is at 0x20220000. The following perepherals are created as an unimplemented device: - Bus Error Uint 0/1/2/3/4 - L2 cache controller - SYSREG - MPUCFG - IOSCBCFG More devices will be added later. The BIOS image used by this machine is hss.bin, aka Hart Software Services, which can be built from: https://github.com/polarfire-soc/hart-software-services To launch this machine: $ qemu-system-riscv64 -nographic -M microchip-icicle-kit The memory is set to 1 GiB by default to match the hardware. A sanity check on ram size is performed in the machine init routine to prompt user to increase the RAM size to > 1 GiB when less than 1 GiB ram is detected. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-5-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-01 04:38:59 +03:00
MICROCHIP_PFSOC_L2LIM,
MICROCHIP_PFSOC_PLIC,
hw/riscv: microchip_pfsoc: Connect 5 MMUARTs Microchip PolarFire SoC has 5 MMUARTs, and the Icicle Kit board wires 4 of them out. Let's connect all 5 MMUARTs. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-7-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-01 04:39:01 +03:00
MICROCHIP_PFSOC_MMUART0,
hw/riscv: Initial support for Microchip PolarFire SoC Icicle Kit board This is an initial support for Microchip PolarFire SoC Icicle Kit. The Icicle Kit board integrates a PolarFire SoC, with one SiFive's E51 plus four U54 cores and many on-chip peripherals and an FPGA. For more details about Microchip PolarFire Soc, please see: https://www.microsemi.com/product-directory/soc-fpgas/5498-polarfire-soc-fpga Unlike SiFive FU540, the RISC-V core resect vector is at 0x20220000. The following perepherals are created as an unimplemented device: - Bus Error Uint 0/1/2/3/4 - L2 cache controller - SYSREG - MPUCFG - IOSCBCFG More devices will be added later. The BIOS image used by this machine is hss.bin, aka Hart Software Services, which can be built from: https://github.com/polarfire-soc/hart-software-services To launch this machine: $ qemu-system-riscv64 -nographic -M microchip-icicle-kit The memory is set to 1 GiB by default to match the hardware. A sanity check on ram size is performed in the machine init routine to prompt user to increase the RAM size to > 1 GiB when less than 1 GiB ram is detected. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-5-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-01 04:38:59 +03:00
MICROCHIP_PFSOC_SYSREG,
MICROCHIP_PFSOC_MPUCFG,
hw/riscv: microchip_pfsoc: Connect DDR memory controller modules Connect DDR SGMII PHY module and CFG module to the PolarFire SoC. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1603863010-15807-4-git-send-email-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-10-28 08:30:03 +03:00
MICROCHIP_PFSOC_DDR_SGMII_PHY,
hw/riscv: microchip_pfsoc: Connect a Cadence SDHCI controller and an SD card Microchip PolarFire SoC integrates one Cadence SDHCI controller. On the Icicle Kit board, one eMMC chip and an external SD card connect to this controller depending on different configuration. As QEMU does not support eMMC yet, we just emulate the SD card configuration. To test this, the Hart Software Services (HSS) should choose the SD card configuration: $ cp boards/icicle-kit-es/def_config.sdcard .config $ make BOARD=icicle-kit-es The SD card image can be built from the Yocto BSP at: https://github.com/polarfire-soc/meta-polarfire-soc-yocto-bsp Note the generated SD card image should be resized before use: $ qemu-img resize /path/to/sdcard.img 4G Launch QEMU with the following command: $ qemu-system-riscv64 -nographic -M microchip-icicle-kit -sd sdcard.img Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-9-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-01 04:39:03 +03:00
MICROCHIP_PFSOC_EMMC_SD,
hw/riscv: microchip_pfsoc: Connect DDR memory controller modules Connect DDR SGMII PHY module and CFG module to the PolarFire SoC. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1603863010-15807-4-git-send-email-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-10-28 08:30:03 +03:00
MICROCHIP_PFSOC_DDR_CFG,
hw/riscv: microchip_pfsoc: Connect 5 MMUARTs Microchip PolarFire SoC has 5 MMUARTs, and the Icicle Kit board wires 4 of them out. Let's connect all 5 MMUARTs. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-7-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-01 04:39:01 +03:00
MICROCHIP_PFSOC_MMUART1,
MICROCHIP_PFSOC_MMUART2,
MICROCHIP_PFSOC_MMUART3,
MICROCHIP_PFSOC_MMUART4,
hw/riscv: microchip_pfsoc: add QSPI NOR flash Add QSPI NOR flash definition for Microchip PolarFire SoC. Signed-off-by: Vitaly Wool <vitaly.wool@konsulko.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Message-id: 20201112074950.33283-1-vitaly.wool@konsulko.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-11-12 10:49:51 +03:00
MICROCHIP_PFSOC_SPI0,
MICROCHIP_PFSOC_SPI1,
hw/riscv: microchip_pfsoc: Hook the I2C1 controller The latest SD card image [1] released by Microchip ships a Linux kernel with built-in PolarFire SoC I2C driver support. The device tree file includes the description for the I2C1 node hence kernel tries to probe the I2C1 device during boot. It is enough to create an unimplemented device for I2C1 to allow the kernel to continue booting to the shell. [1] ftp://ftpsoc.microsemi.com/outgoing/core-image-minimal-dev-icicle-kit-es-sd-20201009141623.rootfs.wic.gz Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1603863010-15807-11-git-send-email-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-10-28 08:30:10 +03:00
MICROCHIP_PFSOC_I2C1,
hw/riscv: microchip_pfsoc: Connect 2 Cadence GEMs Microchip PolarFire SoC integrates 2 Candence GEMs to provide IEEE 802.3 standard-compliant 10/100/1000 Mbps ethernet interface. On the Icicle Kit board, GEM0 connects to a PHY at address 8 while GEM1 connects to a PHY at address 9. The 2nd stage bootloader (U-Boot) is using GEM1 by default, so we must specify 2 '-nic' options from the command line in order to get a working ethernet. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <1598924352-89526-14-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-01 04:39:08 +03:00
MICROCHIP_PFSOC_GEM0,
MICROCHIP_PFSOC_GEM1,
hw/riscv: microchip_pfsoc: Hook GPIO controllers Microchip PolarFire SoC integrates 3 GPIOs controllers. It seems enough to create unimplemented devices to cover their register spaces at this point. With this commit, QEMU can boot to U-Boot (2nd stage bootloader) all the way to the Linux shell login prompt, with a modified HSS (1st stage bootloader). For detailed instructions on how to create images for the Icicle Kit board, please check QEMU RISC-V WiKi page at: https://wiki.qemu.org/Documentation/Platforms/RISCV Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <1598924352-89526-15-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-01 04:39:09 +03:00
MICROCHIP_PFSOC_GPIO0,
MICROCHIP_PFSOC_GPIO1,
MICROCHIP_PFSOC_GPIO2,
hw/riscv: Initial support for Microchip PolarFire SoC Icicle Kit board This is an initial support for Microchip PolarFire SoC Icicle Kit. The Icicle Kit board integrates a PolarFire SoC, with one SiFive's E51 plus four U54 cores and many on-chip peripherals and an FPGA. For more details about Microchip PolarFire Soc, please see: https://www.microsemi.com/product-directory/soc-fpgas/5498-polarfire-soc-fpga Unlike SiFive FU540, the RISC-V core resect vector is at 0x20220000. The following perepherals are created as an unimplemented device: - Bus Error Uint 0/1/2/3/4 - L2 cache controller - SYSREG - MPUCFG - IOSCBCFG More devices will be added later. The BIOS image used by this machine is hss.bin, aka Hart Software Services, which can be built from: https://github.com/polarfire-soc/hart-software-services To launch this machine: $ qemu-system-riscv64 -nographic -M microchip-icicle-kit The memory is set to 1 GiB by default to match the hardware. A sanity check on ram size is performed in the machine init routine to prompt user to increase the RAM size to > 1 GiB when less than 1 GiB ram is detected. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-5-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-01 04:38:59 +03:00
MICROCHIP_PFSOC_ENVM_CFG,
MICROCHIP_PFSOC_ENVM_DATA,
hw/riscv: microchip_pfsoc: add QSPI NOR flash Add QSPI NOR flash definition for Microchip PolarFire SoC. Signed-off-by: Vitaly Wool <vitaly.wool@konsulko.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Message-id: 20201112074950.33283-1-vitaly.wool@konsulko.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-11-12 10:49:51 +03:00
MICROCHIP_PFSOC_QSPI_XIP,
hw/riscv: microchip_pfsoc: Connect the IOSCB module Previously IOSCB_CFG was created as an unimplemented device. With the new IOSCB model, its memory range is already covered by the IOSCB hence remove the previous unimplemented device creation in the SoC codes. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1603863010-15807-6-git-send-email-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-10-28 08:30:05 +03:00
MICROCHIP_PFSOC_IOSCB,
hw/riscv: microchip_pfsoc: Correct DDR memory map When system memory is larger than 1 GiB (high memory), PolarFire SoC maps it at address 0x10_0000_0000. Address 0xC000_0000 and above is aliased to the same 1 GiB low memory with different cache attributes. At present QEMU maps the system memory contiguously from 0x8000_0000. This corrects the wrong QEMU logic. Note address 0x14_0000_0000 is the alias to the high memory, and even physical memory is only 1 GiB, the HSS codes still tries to probe the high memory alias address. It seems there is no issue on the real hardware, so we will have to take that into the consideration in our emulation. Due to this, we we increase the default system memory size to 1537 MiB (the minimum required high memory size by HSS) so that user gets notified an error when less than 1537 MiB is specified. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20201101170538.3732-1-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-11-01 20:05:38 +03:00
MICROCHIP_PFSOC_DRAM_LO,
MICROCHIP_PFSOC_DRAM_LO_ALIAS,
MICROCHIP_PFSOC_DRAM_HI,
MICROCHIP_PFSOC_DRAM_HI_ALIAS
hw/riscv: Initial support for Microchip PolarFire SoC Icicle Kit board This is an initial support for Microchip PolarFire SoC Icicle Kit. The Icicle Kit board integrates a PolarFire SoC, with one SiFive's E51 plus four U54 cores and many on-chip peripherals and an FPGA. For more details about Microchip PolarFire Soc, please see: https://www.microsemi.com/product-directory/soc-fpgas/5498-polarfire-soc-fpga Unlike SiFive FU540, the RISC-V core resect vector is at 0x20220000. The following perepherals are created as an unimplemented device: - Bus Error Uint 0/1/2/3/4 - L2 cache controller - SYSREG - MPUCFG - IOSCBCFG More devices will be added later. The BIOS image used by this machine is hss.bin, aka Hart Software Services, which can be built from: https://github.com/polarfire-soc/hart-software-services To launch this machine: $ qemu-system-riscv64 -nographic -M microchip-icicle-kit The memory is set to 1 GiB by default to match the hardware. A sanity check on ram size is performed in the machine init routine to prompt user to increase the RAM size to > 1 GiB when less than 1 GiB ram is detected. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-5-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-01 04:38:59 +03:00
};
hw/riscv: microchip_pfsoc: Connect 5 MMUARTs Microchip PolarFire SoC has 5 MMUARTs, and the Icicle Kit board wires 4 of them out. Let's connect all 5 MMUARTs. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-7-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-01 04:39:01 +03:00
enum {
hw/riscv: microchip_pfsoc: Connect a DMA controller On the Icicle Kit board, the HSS firmware utilizes the on-chip DMA controller to move the 2nd stage bootloader in the system memory. Let's connect a DMA controller to Microchip PolarFire SoC. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-11-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-01 04:39:05 +03:00
MICROCHIP_PFSOC_DMA_IRQ0 = 5,
MICROCHIP_PFSOC_DMA_IRQ1 = 6,
MICROCHIP_PFSOC_DMA_IRQ2 = 7,
MICROCHIP_PFSOC_DMA_IRQ3 = 8,
MICROCHIP_PFSOC_DMA_IRQ4 = 9,
MICROCHIP_PFSOC_DMA_IRQ5 = 10,
MICROCHIP_PFSOC_DMA_IRQ6 = 11,
MICROCHIP_PFSOC_DMA_IRQ7 = 12,
hw/riscv: microchip_pfsoc: Connect 2 Cadence GEMs Microchip PolarFire SoC integrates 2 Candence GEMs to provide IEEE 802.3 standard-compliant 10/100/1000 Mbps ethernet interface. On the Icicle Kit board, GEM0 connects to a PHY at address 8 while GEM1 connects to a PHY at address 9. The 2nd stage bootloader (U-Boot) is using GEM1 by default, so we must specify 2 '-nic' options from the command line in order to get a working ethernet. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <1598924352-89526-14-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-01 04:39:08 +03:00
MICROCHIP_PFSOC_GEM0_IRQ = 64,
MICROCHIP_PFSOC_GEM1_IRQ = 70,
hw/riscv: microchip_pfsoc: Connect a Cadence SDHCI controller and an SD card Microchip PolarFire SoC integrates one Cadence SDHCI controller. On the Icicle Kit board, one eMMC chip and an external SD card connect to this controller depending on different configuration. As QEMU does not support eMMC yet, we just emulate the SD card configuration. To test this, the Hart Software Services (HSS) should choose the SD card configuration: $ cp boards/icicle-kit-es/def_config.sdcard .config $ make BOARD=icicle-kit-es The SD card image can be built from the Yocto BSP at: https://github.com/polarfire-soc/meta-polarfire-soc-yocto-bsp Note the generated SD card image should be resized before use: $ qemu-img resize /path/to/sdcard.img 4G Launch QEMU with the following command: $ qemu-system-riscv64 -nographic -M microchip-icicle-kit -sd sdcard.img Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-9-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-01 04:39:03 +03:00
MICROCHIP_PFSOC_EMMC_SD_IRQ = 88,
hw/riscv: microchip_pfsoc: Connect 5 MMUARTs Microchip PolarFire SoC has 5 MMUARTs, and the Icicle Kit board wires 4 of them out. Let's connect all 5 MMUARTs. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-7-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-01 04:39:01 +03:00
MICROCHIP_PFSOC_MMUART0_IRQ = 90,
MICROCHIP_PFSOC_MMUART1_IRQ = 91,
MICROCHIP_PFSOC_MMUART2_IRQ = 92,
MICROCHIP_PFSOC_MMUART3_IRQ = 93,
MICROCHIP_PFSOC_MMUART4_IRQ = 94,
};
hw/riscv: Initial support for Microchip PolarFire SoC Icicle Kit board This is an initial support for Microchip PolarFire SoC Icicle Kit. The Icicle Kit board integrates a PolarFire SoC, with one SiFive's E51 plus four U54 cores and many on-chip peripherals and an FPGA. For more details about Microchip PolarFire Soc, please see: https://www.microsemi.com/product-directory/soc-fpgas/5498-polarfire-soc-fpga Unlike SiFive FU540, the RISC-V core resect vector is at 0x20220000. The following perepherals are created as an unimplemented device: - Bus Error Uint 0/1/2/3/4 - L2 cache controller - SYSREG - MPUCFG - IOSCBCFG More devices will be added later. The BIOS image used by this machine is hss.bin, aka Hart Software Services, which can be built from: https://github.com/polarfire-soc/hart-software-services To launch this machine: $ qemu-system-riscv64 -nographic -M microchip-icicle-kit The memory is set to 1 GiB by default to match the hardware. A sanity check on ram size is performed in the machine init routine to prompt user to increase the RAM size to > 1 GiB when less than 1 GiB ram is detected. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-5-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-01 04:38:59 +03:00
#define MICROCHIP_PFSOC_MANAGEMENT_CPU_COUNT 1
#define MICROCHIP_PFSOC_COMPUTE_CPU_COUNT 4
#define MICROCHIP_PFSOC_PLIC_HART_CONFIG "MS"
#define MICROCHIP_PFSOC_PLIC_NUM_SOURCES 185
#define MICROCHIP_PFSOC_PLIC_NUM_PRIORITIES 7
#define MICROCHIP_PFSOC_PLIC_PRIORITY_BASE 0x04
#define MICROCHIP_PFSOC_PLIC_PENDING_BASE 0x1000
#define MICROCHIP_PFSOC_PLIC_ENABLE_BASE 0x2000
#define MICROCHIP_PFSOC_PLIC_ENABLE_STRIDE 0x80
#define MICROCHIP_PFSOC_PLIC_CONTEXT_BASE 0x200000
#define MICROCHIP_PFSOC_PLIC_CONTEXT_STRIDE 0x1000
#endif /* HW_MICROCHIP_PFSOC_H */
Reference in New Issue Copy Permalink