qemu/include/hw/ppc/pnv_xscom.h

89 lines
3.0 KiB
C
Raw Normal View History

ppc/pnv: add XSCOM infrastructure On a real POWER8 system, the Pervasive Interconnect Bus (PIB) serves as a backbone to connect different units of the system. The host firmware connects to the PIB through a bridge unit, the Alter-Display-Unit (ADU), which gives him access to all the chiplets on the PCB network (Pervasive Connect Bus), the PIB acting as the root of this network. XSCOM (serial communication) is the interface to the sideband bus provided by the POWER8 pervasive unit to read and write to chiplets resources. This is needed by the host firmware, OPAL and to a lesser extent, Linux. This is among others how the PCI Host bridges get configured at boot or how the LPC bus is accessed. To represent the ADU of a real system, we introduce a specific AddressSpace to dispatch XSCOM accesses to the targeted chiplets. The translation of an XSCOM address into a PCB register address is slightly different between the P9 and the P8. This is handled before the dispatch using a 8byte alignment for all. To customize the device tree, a QOM InterfaceClass, PnvXScomInterface, is provided with a populate() handler. The chip populates the device tree by simply looping on its children. Therefore, each model needing custom nodes should not forget to declare itself as a child at instantiation time. Based on previous work done by : Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> [dwg: Added cpu parameter to xscom_complete()] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:40 +03:00
/*
* QEMU PowerPC PowerNV XSCOM bus definitions
*
* Copyright (c) 2016, IBM Corporation.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*/
#ifndef _PPC_PNV_XSCOM_H
#define _PPC_PNV_XSCOM_H
#include "qom/object.h"
typedef struct PnvXScomInterface {
Object parent;
} PnvXScomInterface;
#define TYPE_PNV_XSCOM_INTERFACE "pnv-xscom-interface"
#define PNV_XSCOM_INTERFACE(obj) \
OBJECT_CHECK(PnvXScomInterface, (obj), TYPE_PNV_XSCOM_INTERFACE)
#define PNV_XSCOM_INTERFACE_CLASS(klass) \
OBJECT_CLASS_CHECK(PnvXScomInterfaceClass, (klass), \
TYPE_PNV_XSCOM_INTERFACE)
#define PNV_XSCOM_INTERFACE_GET_CLASS(obj) \
OBJECT_GET_CLASS(PnvXScomInterfaceClass, (obj), TYPE_PNV_XSCOM_INTERFACE)
typedef struct PnvXScomInterfaceClass {
InterfaceClass parent;
int (*dt_xscom)(PnvXScomInterface *dev, void *fdt, int offset);
ppc/pnv: add XSCOM infrastructure On a real POWER8 system, the Pervasive Interconnect Bus (PIB) serves as a backbone to connect different units of the system. The host firmware connects to the PIB through a bridge unit, the Alter-Display-Unit (ADU), which gives him access to all the chiplets on the PCB network (Pervasive Connect Bus), the PIB acting as the root of this network. XSCOM (serial communication) is the interface to the sideband bus provided by the POWER8 pervasive unit to read and write to chiplets resources. This is needed by the host firmware, OPAL and to a lesser extent, Linux. This is among others how the PCI Host bridges get configured at boot or how the LPC bus is accessed. To represent the ADU of a real system, we introduce a specific AddressSpace to dispatch XSCOM accesses to the targeted chiplets. The translation of an XSCOM address into a PCB register address is slightly different between the P9 and the P8. This is handled before the dispatch using a 8byte alignment for all. To customize the device tree, a QOM InterfaceClass, PnvXScomInterface, is provided with a populate() handler. The chip populates the device tree by simply looping on its children. Therefore, each model needing custom nodes should not forget to declare itself as a child at instantiation time. Based on previous work done by : Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> [dwg: Added cpu parameter to xscom_complete()] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:40 +03:00
} PnvXScomInterfaceClass;
/*
* Layout of the XSCOM PCB addresses of EX core 1 (POWER 8)
*
* GPIO 0x1100xxxx
* SCOM 0x1101xxxx
* OHA 0x1102xxxx
* CLOCK CTL 0x1103xxxx
* FIR 0x1104xxxx
* THERM 0x1105xxxx
* <reserved> 0x1106xxxx
* ..
* 0x110Exxxx
* PCB SLAVE 0x110Fxxxx
*/
#define PNV_XSCOM_EX_CORE_BASE 0x10000000ull
#define PNV_XSCOM_EX_BASE(core) \
(PNV_XSCOM_EX_CORE_BASE | ((uint64_t)(core) << 24))
#define PNV_XSCOM_EX_SIZE 0x100000
#define PNV_XSCOM_P9_EC_BASE(core) \
((uint64_t)(((core) & 0x1F) + 0x20) << 24)
#define PNV_XSCOM_P9_EC_SIZE 0x100000
ppc/pnv: add a LPC controller The LPC (Low Pin Count) interface on a POWER8 is made accessible to the system through the ADU (XSCOM interface). This interface is part of set of units connected together via a local OPB (On-Chip Peripheral Bus) which act as a bridge between the ADU and the off chip LPC endpoints, like external flash modules. The most important units of this OPB are : - OPB Master: contains the ADU slave logic, a set of internal registers and the logic to control the OPB. - LPCHC (LPC HOST Controller): which implements a OPB Slave, a set of internal registers and the LPC HOST Controller to control the LPC interface. Four address spaces are provided to the ADU : - LPC Bus Firmware Memory - LPC Bus Memory - LPC Bus I/O (ISA bus) - and the registers for the OPB Master and the LPC Host Controller On POWER8, an intermediate hop is necessary to reach the OPB, through a unit called the ECCB. OPB commands are simply mangled in ECCB write commands. On POWER9, the OPB master address space can be accessed via MMIO. The logic is same but the code will be simpler as the XSCOM and ECCB hops are not necessary anymore. This version of the LPC controller model doesn't yet implement support for the SerIRQ deserializer present in the Naples version of the chip though some preliminary work is there. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - ported on latest PowerNV patchset - changed the XSCOM interface to fit new model - QOMified the model - moved the ISA hunks in another patch - removed printf logging - added a couple of UNIMP logging - rewrote commit log ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:42 +03:00
#define PNV_XSCOM_LPC_BASE 0xb0020
#define PNV_XSCOM_LPC_SIZE 0x4
#define PNV_XSCOM_PSIHB_BASE 0x2010900
#define PNV_XSCOM_PSIHB_SIZE 0x20
#define PNV_XSCOM_OCC_BASE 0x0066000
#define PNV_XSCOM_OCC_SIZE 0x6000
ppc/pnv: add XSCOM infrastructure On a real POWER8 system, the Pervasive Interconnect Bus (PIB) serves as a backbone to connect different units of the system. The host firmware connects to the PIB through a bridge unit, the Alter-Display-Unit (ADU), which gives him access to all the chiplets on the PCB network (Pervasive Connect Bus), the PIB acting as the root of this network. XSCOM (serial communication) is the interface to the sideband bus provided by the POWER8 pervasive unit to read and write to chiplets resources. This is needed by the host firmware, OPAL and to a lesser extent, Linux. This is among others how the PCI Host bridges get configured at boot or how the LPC bus is accessed. To represent the ADU of a real system, we introduce a specific AddressSpace to dispatch XSCOM accesses to the targeted chiplets. The translation of an XSCOM address into a PCB register address is slightly different between the P9 and the P8. This is handled before the dispatch using a 8byte alignment for all. To customize the device tree, a QOM InterfaceClass, PnvXScomInterface, is provided with a populate() handler. The chip populates the device tree by simply looping on its children. Therefore, each model needing custom nodes should not forget to declare itself as a child at instantiation time. Based on previous work done by : Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> [dwg: Added cpu parameter to xscom_complete()] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:40 +03:00
extern void pnv_xscom_realize(PnvChip *chip, Error **errp);
extern int pnv_dt_xscom(PnvChip *chip, void *fdt, int offset);
ppc/pnv: add XSCOM infrastructure On a real POWER8 system, the Pervasive Interconnect Bus (PIB) serves as a backbone to connect different units of the system. The host firmware connects to the PIB through a bridge unit, the Alter-Display-Unit (ADU), which gives him access to all the chiplets on the PCB network (Pervasive Connect Bus), the PIB acting as the root of this network. XSCOM (serial communication) is the interface to the sideband bus provided by the POWER8 pervasive unit to read and write to chiplets resources. This is needed by the host firmware, OPAL and to a lesser extent, Linux. This is among others how the PCI Host bridges get configured at boot or how the LPC bus is accessed. To represent the ADU of a real system, we introduce a specific AddressSpace to dispatch XSCOM accesses to the targeted chiplets. The translation of an XSCOM address into a PCB register address is slightly different between the P9 and the P8. This is handled before the dispatch using a 8byte alignment for all. To customize the device tree, a QOM InterfaceClass, PnvXScomInterface, is provided with a populate() handler. The chip populates the device tree by simply looping on its children. Therefore, each model needing custom nodes should not forget to declare itself as a child at instantiation time. Based on previous work done by : Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> [dwg: Added cpu parameter to xscom_complete()] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:40 +03:00
extern void pnv_xscom_add_subregion(PnvChip *chip, hwaddr offset,
MemoryRegion *mr);
extern void pnv_xscom_region_init(MemoryRegion *mr,
struct Object *owner,
const MemoryRegionOps *ops,
void *opaque,
const char *name,
uint64_t size);
#endif /* _PPC_PNV_XSCOM_H */